Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Intel Whiskey Cove PMIC GPIO Driver
4 *
5 * This driver is written based on gpio-crystalcove.c
6 *
7 * Copyright (C) 2016 Intel Corporation. All rights reserved.
8 */
9
10#include <linux/bitops.h>
11#include <linux/gpio/driver.h>
12#include <linux/interrupt.h>
13#include <linux/mfd/intel_soc_pmic.h>
14#include <linux/module.h>
15#include <linux/platform_device.h>
16#include <linux/regmap.h>
17#include <linux/seq_file.h>
18
19/*
20 * Whiskey Cove PMIC has 13 physical GPIO pins divided into 3 banks:
21 * Bank 0: Pin 0 - 6
22 * Bank 1: Pin 7 - 10
23 * Bank 2: Pin 11 - 12
24 * Each pin has one output control register and one input control register.
25 */
26#define BANK0_NR_PINS 7
27#define BANK1_NR_PINS 4
28#define BANK2_NR_PINS 2
29#define WCOVE_GPIO_NUM (BANK0_NR_PINS + BANK1_NR_PINS + BANK2_NR_PINS)
30#define WCOVE_VGPIO_NUM 94
31/* GPIO output control registers (one per pin): 0x4e44 - 0x4e50 */
32#define GPIO_OUT_CTRL_BASE 0x4e44
33/* GPIO input control registers (one per pin): 0x4e51 - 0x4e5d */
34#define GPIO_IN_CTRL_BASE 0x4e51
35
36/*
37 * GPIO interrupts are organized in two groups:
38 * Group 0: Bank 0 pins (Pin 0 - 6)
39 * Group 1: Bank 1 and Bank 2 pins (Pin 7 - 12)
40 * Each group has two registers (one bit per pin): status and mask.
41 */
42#define GROUP0_NR_IRQS 7
43#define GROUP1_NR_IRQS 6
44#define IRQ_MASK_BASE 0x4e19
45#define IRQ_STATUS_BASE 0x4e0b
46#define GPIO_IRQ0_MASK GENMASK(6, 0)
47#define GPIO_IRQ1_MASK GENMASK(5, 0)
48#define UPDATE_IRQ_TYPE BIT(0)
49#define UPDATE_IRQ_MASK BIT(1)
50
51#define CTLI_INTCNT_DIS (0 << 1)
52#define CTLI_INTCNT_NE (1 << 1)
53#define CTLI_INTCNT_PE (2 << 1)
54#define CTLI_INTCNT_BE (3 << 1)
55
56#define CTLO_DIR_IN (0 << 5)
57#define CTLO_DIR_OUT (1 << 5)
58
59#define CTLO_DRV_MASK (1 << 4)
60#define CTLO_DRV_OD (0 << 4)
61#define CTLO_DRV_CMOS (1 << 4)
62
63#define CTLO_DRV_REN (1 << 3)
64
65#define CTLO_RVAL_2KDOWN (0 << 1)
66#define CTLO_RVAL_2KUP (1 << 1)
67#define CTLO_RVAL_50KDOWN (2 << 1)
68#define CTLO_RVAL_50KUP (3 << 1)
69
70#define CTLO_INPUT_SET (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
71#define CTLO_OUTPUT_SET (CTLO_DIR_OUT | CTLO_INPUT_SET)
72
73enum ctrl_register {
74 CTRL_IN,
75 CTRL_OUT,
76};
77
78/*
79 * struct wcove_gpio - Whiskey Cove GPIO controller
80 * @buslock: for bus lock/sync and unlock.
81 * @chip: the abstract gpio_chip structure.
82 * @dev: the gpio device
83 * @regmap: the regmap from the parent device.
84 * @regmap_irq_chip: the regmap of the gpio irq chip.
85 * @update: pending IRQ setting update, to be written to the chip upon unlock.
86 * @intcnt: the Interrupt Detect value to be written.
87 * @set_irq_mask: true if the IRQ mask needs to be set, false to clear.
88 */
89struct wcove_gpio {
90 struct mutex buslock;
91 struct gpio_chip chip;
92 struct device *dev;
93 struct regmap *regmap;
94 struct regmap_irq_chip_data *regmap_irq_chip;
95 int update;
96 int intcnt;
97 bool set_irq_mask;
98};
99
100static inline int to_reg(int gpio, enum ctrl_register reg_type)
101{
102 unsigned int reg;
103
104 if (gpio >= WCOVE_GPIO_NUM)
105 return -EOPNOTSUPP;
106
107 if (reg_type == CTRL_IN)
108 reg = GPIO_IN_CTRL_BASE + gpio;
109 else
110 reg = GPIO_OUT_CTRL_BASE + gpio;
111
112 return reg;
113}
114
115static void wcove_update_irq_mask(struct wcove_gpio *wg, int gpio)
116{
117 unsigned int reg, mask;
118
119 if (gpio < GROUP0_NR_IRQS) {
120 reg = IRQ_MASK_BASE;
121 mask = BIT(gpio % GROUP0_NR_IRQS);
122 } else {
123 reg = IRQ_MASK_BASE + 1;
124 mask = BIT((gpio - GROUP0_NR_IRQS) % GROUP1_NR_IRQS);
125 }
126
127 if (wg->set_irq_mask)
128 regmap_update_bits(wg->regmap, reg, mask, mask);
129 else
130 regmap_update_bits(wg->regmap, reg, mask, 0);
131}
132
133static void wcove_update_irq_ctrl(struct wcove_gpio *wg, int gpio)
134{
135 int reg = to_reg(gpio, CTRL_IN);
136
137 if (reg < 0)
138 return;
139
140 regmap_update_bits(wg->regmap, reg, CTLI_INTCNT_BE, wg->intcnt);
141}
142
143static int wcove_gpio_dir_in(struct gpio_chip *chip, unsigned int gpio)
144{
145 struct wcove_gpio *wg = gpiochip_get_data(chip);
146 int reg = to_reg(gpio, CTRL_OUT);
147
148 if (reg < 0)
149 return 0;
150
151 return regmap_write(wg->regmap, reg, CTLO_INPUT_SET);
152}
153
154static int wcove_gpio_dir_out(struct gpio_chip *chip, unsigned int gpio,
155 int value)
156{
157 struct wcove_gpio *wg = gpiochip_get_data(chip);
158 int reg = to_reg(gpio, CTRL_OUT);
159
160 if (reg < 0)
161 return 0;
162
163 return regmap_write(wg->regmap, reg, CTLO_OUTPUT_SET | value);
164}
165
166static int wcove_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
167{
168 struct wcove_gpio *wg = gpiochip_get_data(chip);
169 unsigned int val;
170 int ret, reg = to_reg(gpio, CTRL_OUT);
171
172 if (reg < 0)
173 return GPIO_LINE_DIRECTION_OUT;
174
175 ret = regmap_read(wg->regmap, reg, &val);
176 if (ret)
177 return ret;
178
179 if (val & CTLO_DIR_OUT)
180 return GPIO_LINE_DIRECTION_OUT;
181
182 return GPIO_LINE_DIRECTION_IN;
183}
184
185static int wcove_gpio_get(struct gpio_chip *chip, unsigned int gpio)
186{
187 struct wcove_gpio *wg = gpiochip_get_data(chip);
188 unsigned int val;
189 int ret, reg = to_reg(gpio, CTRL_IN);
190
191 if (reg < 0)
192 return 0;
193
194 ret = regmap_read(wg->regmap, reg, &val);
195 if (ret)
196 return ret;
197
198 return val & 0x1;
199}
200
201static void wcove_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
202{
203 struct wcove_gpio *wg = gpiochip_get_data(chip);
204 int reg = to_reg(gpio, CTRL_OUT);
205
206 if (reg < 0)
207 return;
208
209 if (value)
210 regmap_update_bits(wg->regmap, reg, 1, 1);
211 else
212 regmap_update_bits(wg->regmap, reg, 1, 0);
213}
214
215static int wcove_gpio_set_config(struct gpio_chip *chip, unsigned int gpio,
216 unsigned long config)
217{
218 struct wcove_gpio *wg = gpiochip_get_data(chip);
219 int reg = to_reg(gpio, CTRL_OUT);
220
221 if (reg < 0)
222 return 0;
223
224 switch (pinconf_to_config_param(config)) {
225 case PIN_CONFIG_DRIVE_OPEN_DRAIN:
226 return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK,
227 CTLO_DRV_OD);
228 case PIN_CONFIG_DRIVE_PUSH_PULL:
229 return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK,
230 CTLO_DRV_CMOS);
231 default:
232 break;
233 }
234
235 return -ENOTSUPP;
236}
237
238static int wcove_irq_type(struct irq_data *data, unsigned int type)
239{
240 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
241 struct wcove_gpio *wg = gpiochip_get_data(chip);
242
243 if (data->hwirq >= WCOVE_GPIO_NUM)
244 return 0;
245
246 switch (type) {
247 case IRQ_TYPE_NONE:
248 wg->intcnt = CTLI_INTCNT_DIS;
249 break;
250 case IRQ_TYPE_EDGE_BOTH:
251 wg->intcnt = CTLI_INTCNT_BE;
252 break;
253 case IRQ_TYPE_EDGE_RISING:
254 wg->intcnt = CTLI_INTCNT_PE;
255 break;
256 case IRQ_TYPE_EDGE_FALLING:
257 wg->intcnt = CTLI_INTCNT_NE;
258 break;
259 default:
260 return -EINVAL;
261 }
262
263 wg->update |= UPDATE_IRQ_TYPE;
264
265 return 0;
266}
267
268static void wcove_bus_lock(struct irq_data *data)
269{
270 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
271 struct wcove_gpio *wg = gpiochip_get_data(chip);
272
273 mutex_lock(&wg->buslock);
274}
275
276static void wcove_bus_sync_unlock(struct irq_data *data)
277{
278 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
279 struct wcove_gpio *wg = gpiochip_get_data(chip);
280 int gpio = data->hwirq;
281
282 if (wg->update & UPDATE_IRQ_TYPE)
283 wcove_update_irq_ctrl(wg, gpio);
284 if (wg->update & UPDATE_IRQ_MASK)
285 wcove_update_irq_mask(wg, gpio);
286 wg->update = 0;
287
288 mutex_unlock(&wg->buslock);
289}
290
291static void wcove_irq_unmask(struct irq_data *data)
292{
293 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
294 struct wcove_gpio *wg = gpiochip_get_data(chip);
295
296 if (data->hwirq >= WCOVE_GPIO_NUM)
297 return;
298
299 wg->set_irq_mask = false;
300 wg->update |= UPDATE_IRQ_MASK;
301}
302
303static void wcove_irq_mask(struct irq_data *data)
304{
305 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
306 struct wcove_gpio *wg = gpiochip_get_data(chip);
307
308 if (data->hwirq >= WCOVE_GPIO_NUM)
309 return;
310
311 wg->set_irq_mask = true;
312 wg->update |= UPDATE_IRQ_MASK;
313}
314
315static struct irq_chip wcove_irqchip = {
316 .name = "Whiskey Cove",
317 .irq_mask = wcove_irq_mask,
318 .irq_unmask = wcove_irq_unmask,
319 .irq_set_type = wcove_irq_type,
320 .irq_bus_lock = wcove_bus_lock,
321 .irq_bus_sync_unlock = wcove_bus_sync_unlock,
322};
323
324static irqreturn_t wcove_gpio_irq_handler(int irq, void *data)
325{
326 struct wcove_gpio *wg = (struct wcove_gpio *)data;
327 unsigned int pending, virq, gpio, mask, offset;
328 u8 p[2];
329
330 if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) {
331 dev_err(wg->dev, "Failed to read irq status register\n");
332 return IRQ_NONE;
333 }
334
335 pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7);
336 if (!pending)
337 return IRQ_NONE;
338
339 /* Iterate until no interrupt is pending */
340 while (pending) {
341 /* One iteration is for all pending bits */
342 for_each_set_bit(gpio, (const unsigned long *)&pending,
343 WCOVE_GPIO_NUM) {
344 offset = (gpio > GROUP0_NR_IRQS) ? 1 : 0;
345 mask = (offset == 1) ? BIT(gpio - GROUP0_NR_IRQS) :
346 BIT(gpio);
347 virq = irq_find_mapping(wg->chip.irq.domain, gpio);
348 handle_nested_irq(virq);
349 regmap_update_bits(wg->regmap, IRQ_STATUS_BASE + offset,
350 mask, mask);
351 }
352
353 /* Next iteration */
354 if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) {
355 dev_err(wg->dev, "Failed to read irq status\n");
356 break;
357 }
358
359 pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7);
360 }
361
362 return IRQ_HANDLED;
363}
364
365static void wcove_gpio_dbg_show(struct seq_file *s,
366 struct gpio_chip *chip)
367{
368 unsigned int ctlo, ctli, irq_mask, irq_status;
369 struct wcove_gpio *wg = gpiochip_get_data(chip);
370 int gpio, offset, group, ret = 0;
371
372 for (gpio = 0; gpio < WCOVE_GPIO_NUM; gpio++) {
373 group = gpio < GROUP0_NR_IRQS ? 0 : 1;
374 ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_OUT), &ctlo);
375 ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_IN), &ctli);
376 ret += regmap_read(wg->regmap, IRQ_MASK_BASE + group,
377 &irq_mask);
378 ret += regmap_read(wg->regmap, IRQ_STATUS_BASE + group,
379 &irq_status);
380 if (ret) {
381 pr_err("Failed to read registers: ctrl out/in or irq status/mask\n");
382 break;
383 }
384
385 offset = gpio % 8;
386 seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s\n",
387 gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
388 ctli & 0x1 ? "hi" : "lo",
389 ctli & CTLI_INTCNT_NE ? "fall" : " ",
390 ctli & CTLI_INTCNT_PE ? "rise" : " ",
391 ctlo,
392 irq_mask & BIT(offset) ? "mask " : "unmask",
393 irq_status & BIT(offset) ? "pending" : " ");
394 }
395}
396
397static int wcove_gpio_probe(struct platform_device *pdev)
398{
399 struct intel_soc_pmic *pmic;
400 struct wcove_gpio *wg;
401 int virq, ret, irq;
402 struct device *dev;
403 struct gpio_irq_chip *girq;
404
405 /*
406 * This gpio platform device is created by a mfd device (see
407 * drivers/mfd/intel_soc_pmic_bxtwc.c for details). Information
408 * shared by all sub-devices created by the mfd device, the regmap
409 * pointer for instance, is stored as driver data of the mfd device
410 * driver.
411 */
412 pmic = dev_get_drvdata(pdev->dev.parent);
413 if (!pmic)
414 return -ENODEV;
415
416 irq = platform_get_irq(pdev, 0);
417 if (irq < 0)
418 return irq;
419
420 dev = &pdev->dev;
421
422 wg = devm_kzalloc(dev, sizeof(*wg), GFP_KERNEL);
423 if (!wg)
424 return -ENOMEM;
425
426 wg->regmap_irq_chip = pmic->irq_chip_data;
427
428 platform_set_drvdata(pdev, wg);
429
430 mutex_init(&wg->buslock);
431 wg->chip.label = KBUILD_MODNAME;
432 wg->chip.direction_input = wcove_gpio_dir_in;
433 wg->chip.direction_output = wcove_gpio_dir_out;
434 wg->chip.get_direction = wcove_gpio_get_direction;
435 wg->chip.get = wcove_gpio_get;
436 wg->chip.set = wcove_gpio_set;
437 wg->chip.set_config = wcove_gpio_set_config,
438 wg->chip.base = -1;
439 wg->chip.ngpio = WCOVE_VGPIO_NUM;
440 wg->chip.can_sleep = true;
441 wg->chip.parent = pdev->dev.parent;
442 wg->chip.dbg_show = wcove_gpio_dbg_show;
443 wg->dev = dev;
444 wg->regmap = pmic->regmap;
445
446 virq = regmap_irq_get_virq(wg->regmap_irq_chip, irq);
447 if (virq < 0) {
448 dev_err(dev, "Failed to get virq by irq %d\n", irq);
449 return virq;
450 }
451
452 girq = &wg->chip.irq;
453 girq->chip = &wcove_irqchip;
454 /* This will let us handle the parent IRQ in the driver */
455 girq->parent_handler = NULL;
456 girq->num_parents = 0;
457 girq->parents = NULL;
458 girq->default_type = IRQ_TYPE_NONE;
459 girq->handler = handle_simple_irq;
460 girq->threaded = true;
461
462 ret = devm_request_threaded_irq(dev, virq, NULL, wcove_gpio_irq_handler,
463 IRQF_ONESHOT, pdev->name, wg);
464 if (ret) {
465 dev_err(dev, "Failed to request irq %d\n", virq);
466 return ret;
467 }
468
469 ret = devm_gpiochip_add_data(dev, &wg->chip, wg);
470 if (ret) {
471 dev_err(dev, "Failed to add gpiochip: %d\n", ret);
472 return ret;
473 }
474
475 /* Enable GPIO0 interrupts */
476 ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE, GPIO_IRQ0_MASK,
477 0x00);
478 if (ret)
479 return ret;
480
481 /* Enable GPIO1 interrupts */
482 ret = regmap_update_bits(wg->regmap, IRQ_MASK_BASE + 1, GPIO_IRQ1_MASK,
483 0x00);
484 if (ret)
485 return ret;
486
487 return 0;
488}
489
490/*
491 * Whiskey Cove PMIC itself is a analog device(but with digital control
492 * interface) providing power management support for other devices in
493 * the accompanied SoC, so we have no .pm for Whiskey Cove GPIO driver.
494 */
495static struct platform_driver wcove_gpio_driver = {
496 .driver = {
497 .name = "bxt_wcove_gpio",
498 },
499 .probe = wcove_gpio_probe,
500};
501
502module_platform_driver(wcove_gpio_driver);
503
504MODULE_AUTHOR("Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com>");
505MODULE_AUTHOR("Bin Gao <bin.gao@intel.com>");
506MODULE_DESCRIPTION("Intel Whiskey Cove GPIO Driver");
507MODULE_LICENSE("GPL v2");
508MODULE_ALIAS("platform:bxt_wcove_gpio");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Intel Whiskey Cove PMIC GPIO Driver
4 *
5 * This driver is written based on gpio-crystalcove.c
6 *
7 * Copyright (C) 2016 Intel Corporation. All rights reserved.
8 */
9
10#include <linux/bitops.h>
11#include <linux/gpio/driver.h>
12#include <linux/interrupt.h>
13#include <linux/mfd/intel_soc_pmic.h>
14#include <linux/module.h>
15#include <linux/platform_device.h>
16#include <linux/regmap.h>
17#include <linux/seq_file.h>
18
19/*
20 * Whiskey Cove PMIC has 13 physical GPIO pins divided into 3 banks:
21 * Bank 0: Pin 0 - 6
22 * Bank 1: Pin 7 - 10
23 * Bank 2: Pin 11 - 12
24 * Each pin has one output control register and one input control register.
25 */
26#define BANK0_NR_PINS 7
27#define BANK1_NR_PINS 4
28#define BANK2_NR_PINS 2
29#define WCOVE_GPIO_NUM (BANK0_NR_PINS + BANK1_NR_PINS + BANK2_NR_PINS)
30#define WCOVE_VGPIO_NUM 94
31/* GPIO output control registers (one per pin): 0x4e44 - 0x4e50 */
32#define GPIO_OUT_CTRL_BASE 0x4e44
33/* GPIO input control registers (one per pin): 0x4e51 - 0x4e5d */
34#define GPIO_IN_CTRL_BASE 0x4e51
35
36/*
37 * GPIO interrupts are organized in two groups:
38 * Group 0: Bank 0 pins (Pin 0 - 6)
39 * Group 1: Bank 1 and Bank 2 pins (Pin 7 - 12)
40 * Each group has two registers (one bit per pin): status and mask.
41 */
42#define GROUP0_NR_IRQS 7
43#define GROUP1_NR_IRQS 6
44#define IRQ_MASK_BASE 0x4e19
45#define IRQ_STATUS_BASE 0x4e0b
46#define GPIO_IRQ0_MASK GENMASK(6, 0)
47#define GPIO_IRQ1_MASK GENMASK(5, 0)
48#define UPDATE_IRQ_TYPE BIT(0)
49#define UPDATE_IRQ_MASK BIT(1)
50
51#define CTLI_INTCNT_DIS (0 << 1)
52#define CTLI_INTCNT_NE (1 << 1)
53#define CTLI_INTCNT_PE (2 << 1)
54#define CTLI_INTCNT_BE (3 << 1)
55
56#define CTLO_DIR_IN (0 << 5)
57#define CTLO_DIR_OUT (1 << 5)
58
59#define CTLO_DRV_MASK (1 << 4)
60#define CTLO_DRV_OD (0 << 4)
61#define CTLO_DRV_CMOS (1 << 4)
62
63#define CTLO_DRV_REN (1 << 3)
64
65#define CTLO_RVAL_2KDOWN (0 << 1)
66#define CTLO_RVAL_2KUP (1 << 1)
67#define CTLO_RVAL_50KDOWN (2 << 1)
68#define CTLO_RVAL_50KUP (3 << 1)
69
70#define CTLO_INPUT_SET (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
71#define CTLO_OUTPUT_SET (CTLO_DIR_OUT | CTLO_INPUT_SET)
72
73enum ctrl_register {
74 CTRL_IN,
75 CTRL_OUT,
76 IRQ_STATUS,
77 IRQ_MASK,
78};
79
80/*
81 * struct wcove_gpio - Whiskey Cove GPIO controller
82 * @buslock: for bus lock/sync and unlock.
83 * @chip: the abstract gpio_chip structure.
84 * @dev: the gpio device
85 * @regmap: the regmap from the parent device.
86 * @regmap_irq_chip: the regmap of the gpio irq chip.
87 * @update: pending IRQ setting update, to be written to the chip upon unlock.
88 * @intcnt: the Interrupt Detect value to be written.
89 * @set_irq_mask: true if the IRQ mask needs to be set, false to clear.
90 */
91struct wcove_gpio {
92 struct mutex buslock;
93 struct gpio_chip chip;
94 struct device *dev;
95 struct regmap *regmap;
96 struct regmap_irq_chip_data *regmap_irq_chip;
97 int update;
98 int intcnt;
99 bool set_irq_mask;
100};
101
102static inline int to_reg(int gpio, enum ctrl_register type)
103{
104 unsigned int reg = type == CTRL_IN ? GPIO_IN_CTRL_BASE : GPIO_OUT_CTRL_BASE;
105
106 if (gpio >= WCOVE_GPIO_NUM)
107 return -EOPNOTSUPP;
108
109 return reg + gpio;
110}
111
112static inline int to_ireg(int gpio, enum ctrl_register type, unsigned int *mask)
113{
114 unsigned int reg = type == IRQ_STATUS ? IRQ_STATUS_BASE : IRQ_MASK_BASE;
115
116 if (gpio < GROUP0_NR_IRQS) {
117 reg += 0;
118 *mask = BIT(gpio);
119 } else {
120 reg += 1;
121 *mask = BIT(gpio - GROUP0_NR_IRQS);
122 }
123
124 return reg;
125}
126
127static void wcove_update_irq_mask(struct wcove_gpio *wg, irq_hw_number_t gpio)
128{
129 unsigned int mask, reg = to_ireg(gpio, IRQ_MASK, &mask);
130
131 if (wg->set_irq_mask)
132 regmap_set_bits(wg->regmap, reg, mask);
133 else
134 regmap_clear_bits(wg->regmap, reg, mask);
135}
136
137static void wcove_update_irq_ctrl(struct wcove_gpio *wg, irq_hw_number_t gpio)
138{
139 int reg = to_reg(gpio, CTRL_IN);
140
141 regmap_update_bits(wg->regmap, reg, CTLI_INTCNT_BE, wg->intcnt);
142}
143
144static int wcove_gpio_dir_in(struct gpio_chip *chip, unsigned int gpio)
145{
146 struct wcove_gpio *wg = gpiochip_get_data(chip);
147 int reg = to_reg(gpio, CTRL_OUT);
148
149 if (reg < 0)
150 return 0;
151
152 return regmap_write(wg->regmap, reg, CTLO_INPUT_SET);
153}
154
155static int wcove_gpio_dir_out(struct gpio_chip *chip, unsigned int gpio,
156 int value)
157{
158 struct wcove_gpio *wg = gpiochip_get_data(chip);
159 int reg = to_reg(gpio, CTRL_OUT);
160
161 if (reg < 0)
162 return 0;
163
164 return regmap_write(wg->regmap, reg, CTLO_OUTPUT_SET | value);
165}
166
167static int wcove_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
168{
169 struct wcove_gpio *wg = gpiochip_get_data(chip);
170 unsigned int val;
171 int ret, reg = to_reg(gpio, CTRL_OUT);
172
173 if (reg < 0)
174 return GPIO_LINE_DIRECTION_OUT;
175
176 ret = regmap_read(wg->regmap, reg, &val);
177 if (ret)
178 return ret;
179
180 if (val & CTLO_DIR_OUT)
181 return GPIO_LINE_DIRECTION_OUT;
182
183 return GPIO_LINE_DIRECTION_IN;
184}
185
186static int wcove_gpio_get(struct gpio_chip *chip, unsigned int gpio)
187{
188 struct wcove_gpio *wg = gpiochip_get_data(chip);
189 unsigned int val;
190 int ret, reg = to_reg(gpio, CTRL_IN);
191
192 if (reg < 0)
193 return 0;
194
195 ret = regmap_read(wg->regmap, reg, &val);
196 if (ret)
197 return ret;
198
199 return val & 0x1;
200}
201
202static void wcove_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
203{
204 struct wcove_gpio *wg = gpiochip_get_data(chip);
205 int reg = to_reg(gpio, CTRL_OUT);
206
207 if (reg < 0)
208 return;
209
210 if (value)
211 regmap_set_bits(wg->regmap, reg, 1);
212 else
213 regmap_clear_bits(wg->regmap, reg, 1);
214}
215
216static int wcove_gpio_set_config(struct gpio_chip *chip, unsigned int gpio,
217 unsigned long config)
218{
219 struct wcove_gpio *wg = gpiochip_get_data(chip);
220 int reg = to_reg(gpio, CTRL_OUT);
221
222 if (reg < 0)
223 return 0;
224
225 switch (pinconf_to_config_param(config)) {
226 case PIN_CONFIG_DRIVE_OPEN_DRAIN:
227 return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK,
228 CTLO_DRV_OD);
229 case PIN_CONFIG_DRIVE_PUSH_PULL:
230 return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK,
231 CTLO_DRV_CMOS);
232 default:
233 break;
234 }
235
236 return -ENOTSUPP;
237}
238
239static int wcove_irq_type(struct irq_data *data, unsigned int type)
240{
241 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
242 struct wcove_gpio *wg = gpiochip_get_data(chip);
243 irq_hw_number_t gpio = irqd_to_hwirq(data);
244
245 if (gpio >= WCOVE_GPIO_NUM)
246 return 0;
247
248 switch (type) {
249 case IRQ_TYPE_NONE:
250 wg->intcnt = CTLI_INTCNT_DIS;
251 break;
252 case IRQ_TYPE_EDGE_BOTH:
253 wg->intcnt = CTLI_INTCNT_BE;
254 break;
255 case IRQ_TYPE_EDGE_RISING:
256 wg->intcnt = CTLI_INTCNT_PE;
257 break;
258 case IRQ_TYPE_EDGE_FALLING:
259 wg->intcnt = CTLI_INTCNT_NE;
260 break;
261 default:
262 return -EINVAL;
263 }
264
265 wg->update |= UPDATE_IRQ_TYPE;
266
267 return 0;
268}
269
270static void wcove_bus_lock(struct irq_data *data)
271{
272 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
273 struct wcove_gpio *wg = gpiochip_get_data(chip);
274
275 mutex_lock(&wg->buslock);
276}
277
278static void wcove_bus_sync_unlock(struct irq_data *data)
279{
280 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
281 struct wcove_gpio *wg = gpiochip_get_data(chip);
282 irq_hw_number_t gpio = irqd_to_hwirq(data);
283
284 if (wg->update & UPDATE_IRQ_TYPE)
285 wcove_update_irq_ctrl(wg, gpio);
286 if (wg->update & UPDATE_IRQ_MASK)
287 wcove_update_irq_mask(wg, gpio);
288 wg->update = 0;
289
290 mutex_unlock(&wg->buslock);
291}
292
293static void wcove_irq_unmask(struct irq_data *data)
294{
295 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
296 struct wcove_gpio *wg = gpiochip_get_data(chip);
297 irq_hw_number_t gpio = irqd_to_hwirq(data);
298
299 if (gpio >= WCOVE_GPIO_NUM)
300 return;
301
302 gpiochip_enable_irq(chip, gpio);
303
304 wg->set_irq_mask = false;
305 wg->update |= UPDATE_IRQ_MASK;
306}
307
308static void wcove_irq_mask(struct irq_data *data)
309{
310 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
311 struct wcove_gpio *wg = gpiochip_get_data(chip);
312 irq_hw_number_t gpio = irqd_to_hwirq(data);
313
314 if (gpio >= WCOVE_GPIO_NUM)
315 return;
316
317 wg->set_irq_mask = true;
318 wg->update |= UPDATE_IRQ_MASK;
319
320 gpiochip_disable_irq(chip, gpio);
321}
322
323static const struct irq_chip wcove_irqchip = {
324 .name = "Whiskey Cove",
325 .irq_mask = wcove_irq_mask,
326 .irq_unmask = wcove_irq_unmask,
327 .irq_set_type = wcove_irq_type,
328 .irq_bus_lock = wcove_bus_lock,
329 .irq_bus_sync_unlock = wcove_bus_sync_unlock,
330 .flags = IRQCHIP_IMMUTABLE,
331 GPIOCHIP_IRQ_RESOURCE_HELPERS,
332};
333
334static irqreturn_t wcove_gpio_irq_handler(int irq, void *data)
335{
336 struct wcove_gpio *wg = (struct wcove_gpio *)data;
337 unsigned int virq, gpio;
338 unsigned long pending;
339 u8 p[2];
340
341 if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) {
342 dev_err(wg->dev, "Failed to read irq status register\n");
343 return IRQ_NONE;
344 }
345
346 pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7);
347 if (!pending)
348 return IRQ_NONE;
349
350 /* Iterate until no interrupt is pending */
351 while (pending) {
352 /* One iteration is for all pending bits */
353 for_each_set_bit(gpio, &pending, WCOVE_GPIO_NUM) {
354 unsigned int mask, reg = to_ireg(gpio, IRQ_STATUS, &mask);
355
356 virq = irq_find_mapping(wg->chip.irq.domain, gpio);
357 handle_nested_irq(virq);
358 regmap_set_bits(wg->regmap, reg, mask);
359 }
360
361 /* Next iteration */
362 if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) {
363 dev_err(wg->dev, "Failed to read irq status\n");
364 break;
365 }
366
367 pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7);
368 }
369
370 return IRQ_HANDLED;
371}
372
373static void wcove_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
374{
375 unsigned int ctlo, ctli, irq_mask, irq_status;
376 struct wcove_gpio *wg = gpiochip_get_data(chip);
377 int gpio, mask, ret = 0;
378
379 for (gpio = 0; gpio < WCOVE_GPIO_NUM; gpio++) {
380 ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_OUT), &ctlo);
381 ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_IN), &ctli);
382 if (ret) {
383 dev_err(wg->dev, "Failed to read registers: CTRL out/in\n");
384 break;
385 }
386
387 ret += regmap_read(wg->regmap, to_ireg(gpio, IRQ_MASK, &mask), &irq_mask);
388 ret += regmap_read(wg->regmap, to_ireg(gpio, IRQ_STATUS, &mask), &irq_status);
389 if (ret) {
390 dev_err(wg->dev, "Failed to read registers: IRQ status/mask\n");
391 break;
392 }
393
394 seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s\n",
395 gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
396 ctli & 0x1 ? "hi" : "lo",
397 ctli & CTLI_INTCNT_NE ? "fall" : " ",
398 ctli & CTLI_INTCNT_PE ? "rise" : " ",
399 ctlo,
400 irq_mask & mask ? "mask " : "unmask",
401 irq_status & mask ? "pending" : " ");
402 }
403}
404
405static int wcove_gpio_probe(struct platform_device *pdev)
406{
407 struct intel_soc_pmic *pmic;
408 struct wcove_gpio *wg;
409 int virq, ret, irq;
410 struct device *dev;
411 struct gpio_irq_chip *girq;
412
413 /*
414 * This gpio platform device is created by a mfd device (see
415 * drivers/mfd/intel_soc_pmic_bxtwc.c for details). Information
416 * shared by all sub-devices created by the mfd device, the regmap
417 * pointer for instance, is stored as driver data of the mfd device
418 * driver.
419 */
420 pmic = dev_get_drvdata(pdev->dev.parent);
421 if (!pmic)
422 return -ENODEV;
423
424 irq = platform_get_irq(pdev, 0);
425 if (irq < 0)
426 return irq;
427
428 dev = &pdev->dev;
429
430 wg = devm_kzalloc(dev, sizeof(*wg), GFP_KERNEL);
431 if (!wg)
432 return -ENOMEM;
433
434 wg->regmap_irq_chip = pmic->irq_chip_data;
435
436 platform_set_drvdata(pdev, wg);
437
438 mutex_init(&wg->buslock);
439 wg->chip.label = KBUILD_MODNAME;
440 wg->chip.direction_input = wcove_gpio_dir_in;
441 wg->chip.direction_output = wcove_gpio_dir_out;
442 wg->chip.get_direction = wcove_gpio_get_direction;
443 wg->chip.get = wcove_gpio_get;
444 wg->chip.set = wcove_gpio_set;
445 wg->chip.set_config = wcove_gpio_set_config;
446 wg->chip.base = -1;
447 wg->chip.ngpio = WCOVE_VGPIO_NUM;
448 wg->chip.can_sleep = true;
449 wg->chip.parent = pdev->dev.parent;
450 wg->chip.dbg_show = wcove_gpio_dbg_show;
451 wg->dev = dev;
452 wg->regmap = pmic->regmap;
453
454 virq = regmap_irq_get_virq(wg->regmap_irq_chip, irq);
455 if (virq < 0) {
456 dev_err(dev, "Failed to get virq by irq %d\n", irq);
457 return virq;
458 }
459
460 girq = &wg->chip.irq;
461 gpio_irq_chip_set_chip(girq, &wcove_irqchip);
462 /* This will let us handle the parent IRQ in the driver */
463 girq->parent_handler = NULL;
464 girq->num_parents = 0;
465 girq->parents = NULL;
466 girq->default_type = IRQ_TYPE_NONE;
467 girq->handler = handle_simple_irq;
468 girq->threaded = true;
469
470 ret = devm_request_threaded_irq(dev, virq, NULL, wcove_gpio_irq_handler,
471 IRQF_ONESHOT, pdev->name, wg);
472 if (ret) {
473 dev_err(dev, "Failed to request irq %d\n", virq);
474 return ret;
475 }
476
477 ret = devm_gpiochip_add_data(dev, &wg->chip, wg);
478 if (ret) {
479 dev_err(dev, "Failed to add gpiochip: %d\n", ret);
480 return ret;
481 }
482
483 /* Enable GPIO0 interrupts */
484 ret = regmap_clear_bits(wg->regmap, IRQ_MASK_BASE + 0, GPIO_IRQ0_MASK);
485 if (ret)
486 return ret;
487
488 /* Enable GPIO1 interrupts */
489 ret = regmap_clear_bits(wg->regmap, IRQ_MASK_BASE + 1, GPIO_IRQ1_MASK);
490 if (ret)
491 return ret;
492
493 return 0;
494}
495
496/*
497 * Whiskey Cove PMIC itself is a analog device(but with digital control
498 * interface) providing power management support for other devices in
499 * the accompanied SoC, so we have no .pm for Whiskey Cove GPIO driver.
500 */
501static struct platform_driver wcove_gpio_driver = {
502 .driver = {
503 .name = "bxt_wcove_gpio",
504 },
505 .probe = wcove_gpio_probe,
506};
507
508module_platform_driver(wcove_gpio_driver);
509
510MODULE_AUTHOR("Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com>");
511MODULE_AUTHOR("Bin Gao <bin.gao@intel.com>");
512MODULE_DESCRIPTION("Intel Whiskey Cove GPIO Driver");
513MODULE_LICENSE("GPL v2");
514MODULE_ALIAS("platform:bxt_wcove_gpio");