Loading...
Note: File does not exist in v5.9.
1# SPDX-License-Identifier: GPL-2.0
2menuconfig COMEDI
3 tristate "Data acquisition support (comedi)"
4 help
5 Enable support for a wide range of data acquisition devices
6 for Linux.
7
8if COMEDI
9
10config COMEDI_DEBUG
11 bool "Comedi debugging"
12 help
13 This is an option for use by developers; most people should
14 say N here. This enables comedi core and driver debugging.
15
16config COMEDI_DEFAULT_BUF_SIZE_KB
17 int "Comedi default initial asynchronous buffer size in KiB"
18 default "2048"
19 help
20 This is the default asynchronous buffer size which is used for
21 commands running in the background in kernel space. This
22 defaults to 2048 KiB of memory so that a 16 channel card
23 running at 10 kHz has of 2-4 seconds of buffer.
24
25config COMEDI_DEFAULT_BUF_MAXSIZE_KB
26 int "Comedi default maximum asynchronous buffer size in KiB"
27 default "20480"
28 help
29 This is the default maximum asynchronous buffer size which can
30 be requested by a userspace program without root privileges.
31 This is set to 20480 KiB so that a fast I/O card with 16
32 channels running at 100 kHz has 2-4 seconds of buffer.
33
34menuconfig COMEDI_MISC_DRIVERS
35 bool "Comedi misc drivers"
36 help
37 Enable comedi misc drivers to be built
38
39 Note that the answer to this question won't directly affect the
40 kernel: saying N will just cause the configurator to skip all
41 the questions about misc non-hardware comedi drivers.
42
43if COMEDI_MISC_DRIVERS
44
45config COMEDI_BOND
46 tristate "Comedi device bonding support"
47 select COMEDI_KCOMEDILIB
48 help
49 Enable support for a driver to 'bond' (merge) multiple subdevices
50 from multiple devices together as one.
51
52 Currently, it only handles digital I/O subdevices.
53
54 To compile this driver as a module, choose M here: the module will be
55 called comedi_bond.
56
57config COMEDI_TEST
58 tristate "Fake waveform generator support"
59 help
60 Enable support for the fake waveform generator.
61 This driver is mainly for testing purposes, but can also be used to
62 generate sample waveforms on systems that don't have data acquisition
63 hardware.
64
65 To compile this driver as a module, choose M here: the module will be
66 called comedi_test.
67
68config COMEDI_PARPORT
69 tristate "Parallel port support"
70 depends on HAS_IOPORT
71 help
72 Enable support for the standard parallel port.
73 A cheap and easy way to get a few more digital I/O lines. Steal
74 additional parallel ports from old computers or your neighbors'
75 computers.
76
77 To compile this driver as a module, choose M here: the module will be
78 called comedi_parport.
79
80config COMEDI_SSV_DNP
81 tristate "SSV Embedded Systems DIL/Net-PC support"
82 depends on X86_32 || COMPILE_TEST
83 depends on HAS_IOPORT
84 help
85 Enable support for SSV Embedded Systems DIL/Net-PC
86
87 To compile this driver as a module, choose M here: the module will be
88 called ssv_dnp.
89
90endif # COMEDI_MISC_DRIVERS
91
92menuconfig COMEDI_ISA_DRIVERS
93 bool "Comedi ISA and PC/104 drivers"
94 depends on ISA || ISA_BUS || PC104
95 depends on HAS_IOPORT
96 help
97 Enable comedi ISA and PC/104 drivers to be built
98
99 Note that the answer to this question won't directly affect the
100 kernel: saying N will just cause the configurator to skip all
101 the questions about ISA and PC/104 comedi drivers.
102
103if COMEDI_ISA_DRIVERS
104
105config COMEDI_PCL711
106 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
107 select COMEDI_8254
108 help
109 Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
110
111 To compile this driver as a module, choose M here: the module will be
112 called pcl711.
113
114config COMEDI_PCL724
115 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
116 select COMEDI_8255
117 help
118 Enable support for ISA and PC/104 based 8255 digital i/o boards. This
119 driver provides a legacy comedi driver wrapper for the generic 8255
120 support driver.
121
122 Supported boards include:
123 Advantech PCL-724 24 channels
124 Advantech PCL-722 144 (or 96) channels
125 Advantech PCL-731 48 channels
126 ADlink ACL-7122 144 (or 96) channels
127 ADlink ACL-7124 24 channels
128 ADlink PET-48DIO 48 channels
129 WinSystems PCM-IO48 48 channels (PC/104)
130 Diamond Systems ONYX-MM-DIO 48 channels (PC/104)
131
132 To compile this driver as a module, choose M here: the module will be
133 called pcl724.
134
135config COMEDI_PCL726
136 tristate "Advantech PCL-726 and compatible ISA card support"
137 help
138 Enable support for Advantech PCL-726 and compatible ISA cards.
139
140 To compile this driver as a module, choose M here: the module will be
141 called pcl726.
142
143config COMEDI_PCL730
144 tristate "Simple Digital I/O board support (8-bit ports)"
145 help
146 Enable support for various simple ISA or PC/104 Digital I/O boards.
147 These boards all use 8-bit I/O ports.
148
149 Advantech PCL-730 iso - 16 in/16 out ttl - 16 in/16 out
150 ICP ISO-730 iso - 16 in/16 out ttl - 16 in/16 out
151 ADlink ACL-7130 iso - 16 in/16 out ttl - 16 in/16 out
152 Advantech PCM-3730 iso - 8 in/8 out ttl - 16 in/16 out
153 Advantech PCL-725 iso - 8 in/8 out
154 ICP P8R8-DIO iso - 8 in/8 out
155 ADlink ACL-7225b iso - 16 in/16 out
156 ICP P16R16-DIO iso - 16 in/16 out
157 Advantech PCL-733 iso - 32 in
158 Advantech PCL-734 iso - 32 out
159 Diamond Systems OPMM-1616-XT iso - 16 in/16 out
160 Diamond Systems PEARL-MM-P iso - 16 out
161 Diamond Systems IR104-PBF iso - 20 in/20 out
162
163 To compile this driver as a module, choose M here: the module will be
164 called pcl730.
165
166config COMEDI_PCL812
167 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
168 select COMEDI_ISADMA if ISA_DMA_API
169 select COMEDI_8254
170 help
171 Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
172 ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
173 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
174
175 To compile this driver as a module, choose M here: the module will be
176 called pcl812.
177
178config COMEDI_PCL816
179 tristate "Advantech PCL-814 and PCL-816 ISA card support"
180 select COMEDI_ISADMA if ISA_DMA_API
181 select COMEDI_8254
182 help
183 Enable support for Advantech PCL-814 and PCL-816 ISA cards
184
185 To compile this driver as a module, choose M here: the module will be
186 called pcl816.
187
188config COMEDI_PCL818
189 tristate "Advantech PCL-718 and PCL-818 ISA card support"
190 select COMEDI_ISADMA if ISA_DMA_API
191 select COMEDI_8254
192 help
193 Enable support for Advantech PCL-818 ISA cards
194 PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
195
196 To compile this driver as a module, choose M here: the module will be
197 called pcl818.
198
199config COMEDI_PCM3724
200 tristate "Advantech PCM-3724 PC/104 card support"
201 select COMEDI_8255
202 help
203 Enable support for Advantech PCM-3724 PC/104 cards.
204
205 To compile this driver as a module, choose M here: the module will be
206 called pcm3724.
207
208config COMEDI_AMPLC_DIO200_ISA
209 tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
210 select COMEDI_AMPLC_DIO200
211 help
212 Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
213 PC272E ISA DIO boards
214
215 To compile this driver as a module, choose M here: the module will be
216 called amplc_dio200.
217
218config COMEDI_AMPLC_PC236_ISA
219 tristate "Amplicon PC36AT DIO board support"
220 select COMEDI_AMPLC_PC236
221 help
222 Enable support for Amplicon PC36AT ISA DIO board.
223
224 To compile this driver as a module, choose M here: the module will be
225 called amplc_pc236.
226
227config COMEDI_AMPLC_PC263_ISA
228 tristate "Amplicon PC263 relay board support"
229 help
230 Enable support for Amplicon PC263 ISA relay board. This board has
231 16 reed relay output channels.
232
233 To compile this driver as a module, choose M here: the module will be
234 called amplc_pc263.
235
236config COMEDI_RTI800
237 tristate "Analog Devices RTI-800/815 ISA card support"
238 help
239 Enable support for Analog Devices RTI-800/815 ISA cards
240
241 To compile this driver as a module, choose M here: the module will be
242 called rti800.
243
244config COMEDI_RTI802
245 tristate "Analog Devices RTI-802 ISA card support"
246 help
247 Enable support for Analog Devices RTI-802 ISA cards
248
249 To compile this driver as a module, choose M here: the module will be
250 called rti802.
251
252config COMEDI_DAC02
253 tristate "Keithley Metrabyte DAC02 compatible ISA card support"
254 help
255 Enable support for Keithley Metrabyte DAC02 compatible ISA cards.
256
257 To compile this driver as a module, choose M here: the module will be
258 called dac02.
259
260config COMEDI_DAS16M1
261 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
262 select COMEDI_8254
263 select COMEDI_8255
264 help
265 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
266
267 To compile this driver as a module, choose M here: the module will be
268 called das16m1.
269
270config COMEDI_DAS08_ISA
271 tristate "DAS-08 compatible ISA and PC/104 card support"
272 select COMEDI_DAS08
273 help
274 Enable support for Keithley Metrabyte/ComputerBoards DAS08
275 and compatible ISA and PC/104 cards:
276 Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
277 DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
278 DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
279
280 To compile this driver as a module, choose M here: the module will be
281 called das08_isa.
282
283config COMEDI_DAS16
284 tristate "DAS-16 compatible ISA and PC/104 card support"
285 select COMEDI_ISADMA if ISA_DMA_API
286 select COMEDI_8254
287 select COMEDI_8255
288 help
289 Enable support for Keithley Metrabyte/ComputerBoards DAS16
290 and compatible ISA and PC/104 cards:
291 Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
292 DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
293 ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
294 PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
295 CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
296 CIO-DAS1602/16, CIO-DAS16/330
297
298 To compile this driver as a module, choose M here: the module will be
299 called das16.
300
301config COMEDI_DAS800
302 tristate "DAS800 and compatible ISA card support"
303 select COMEDI_8254
304 help
305 Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
306 Keithley Metrabyte DAS-800, DAS-801, DAS-802
307 Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
308 CIO-DAS802/16
309
310 To compile this driver as a module, choose M here: the module will be
311 called das800.
312
313config COMEDI_DAS1800
314 tristate "DAS1800 and compatible ISA card support"
315 select COMEDI_ISADMA if ISA_DMA_API
316 select COMEDI_8254
317 help
318 Enable support for DAS1800 and compatible ISA cards
319 Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
320 DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
321 DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
322 DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
323 DAS-1802AO
324
325 To compile this driver as a module, choose M here: the module will be
326 called das1800.
327
328config COMEDI_DAS6402
329 tristate "DAS6402 and compatible ISA card support"
330 select COMEDI_8254
331 help
332 Enable support for DAS6402 and compatible ISA cards
333 Computerboards, Keithley Metrabyte DAS6402 and compatibles
334
335 To compile this driver as a module, choose M here: the module will be
336 called das6402.
337
338config COMEDI_DT2801
339 tristate "Data Translation DT2801 ISA card support"
340 help
341 Enable support for Data Translation DT2801 ISA cards
342
343 To compile this driver as a module, choose M here: the module will be
344 called dt2801.
345
346config COMEDI_DT2811
347 tristate "Data Translation DT2811 ISA card support"
348 help
349 Enable support for Data Translation DT2811 ISA cards
350
351 To compile this driver as a module, choose M here: the module will be
352 called dt2811.
353
354config COMEDI_DT2814
355 tristate "Data Translation DT2814 ISA card support"
356 help
357 Enable support for Data Translation DT2814 ISA cards
358
359 To compile this driver as a module, choose M here: the module will be
360 called dt2814.
361
362config COMEDI_DT2815
363 tristate "Data Translation DT2815 ISA card support"
364 help
365 Enable support for Data Translation DT2815 ISA cards
366
367 To compile this driver as a module, choose M here: the module will be
368 called dt2815.
369
370config COMEDI_DT2817
371 tristate "Data Translation DT2817 ISA card support"
372 help
373 Enable support for Data Translation DT2817 ISA cards
374
375 To compile this driver as a module, choose M here: the module will be
376 called dt2817.
377
378config COMEDI_DT282X
379 tristate "Data Translation DT2821 series and DT-EZ ISA card support"
380 select COMEDI_ISADMA if ISA_DMA_API
381 help
382 Enable support for Data Translation DT2821 series including DT-EZ
383 DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
384 DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
385 DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
386
387 To compile this driver as a module, choose M here: the module will be
388 called dt282x.
389
390config COMEDI_DMM32AT
391 tristate "Diamond Systems MM-32-AT PC/104 board support"
392 select COMEDI_8255
393 help
394 Enable support for Diamond Systems MM-32-AT PC/104 boards
395
396 To compile this driver as a module, choose M here: the module will be
397 called dmm32at.
398
399config COMEDI_FL512
400 tristate "FL512 ISA card support"
401 help
402 Enable support for FL512 ISA card
403
404 To compile this driver as a module, choose M here: the module will be
405 called fl512.
406
407config COMEDI_AIO_AIO12_8
408 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
409 select COMEDI_8254
410 select COMEDI_8255
411 help
412 Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
413
414 To compile this driver as a module, choose M here: the module will be
415 called aio_aio12_8.
416
417config COMEDI_AIO_IIRO_16
418 tristate "I/O Products PC/104 IIRO16 Board support"
419 help
420 Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
421 Input Board
422
423 To compile this driver as a module, choose M here: the module will be
424 called aio_iiro_16.
425
426config COMEDI_II_PCI20KC
427 tristate "Intelligent Instruments PCI-20001C carrier support"
428 depends on HAS_IOMEM
429 help
430 Enable support for Intelligent Instruments PCI-20001C carrier
431 PCI-20001, PCI-20006 and PCI-20341
432
433 To compile this driver as a module, choose M here: the module will be
434 called ii_pci20kc.
435
436config COMEDI_C6XDIGIO
437 tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
438 help
439 Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
440 card
441
442 To compile this driver as a module, choose M here: the module will be
443 called c6xdigio.
444
445config COMEDI_MPC624
446 tristate "Micro/sys MPC-624 PC/104 board support"
447 help
448 Enable support for Micro/sys MPC-624 PC/104 board
449
450 To compile this driver as a module, choose M here: the module will be
451 called mpc624.
452
453config COMEDI_ADQ12B
454 tristate "MicroAxial ADQ12-B data acquisition and control card support"
455 help
456 Enable MicroAxial ADQ12-B daq and control card support.
457
458 To compile this driver as a module, choose M here: the module will be
459 called adq12b.
460
461config COMEDI_NI_AT_A2150
462 tristate "NI AT-A2150 ISA card support"
463 select COMEDI_ISADMA if ISA_DMA_API
464 select COMEDI_8254
465 help
466 Enable support for National Instruments AT-A2150 cards
467
468 To compile this driver as a module, choose M here: the module will be
469 called ni_at_a2150.
470
471config COMEDI_NI_AT_AO
472 tristate "NI AT-AO-6/10 EISA card support"
473 select COMEDI_8254
474 help
475 Enable support for National Instruments AT-AO-6/10 cards
476
477 To compile this driver as a module, choose M here: the module will be
478 called ni_at_ao.
479
480config COMEDI_NI_ATMIO
481 tristate "NI AT-MIO E series ISA-PNP card support"
482 select COMEDI_8255
483 select COMEDI_NI_TIO
484 help
485 Enable support for National Instruments AT-MIO E series cards
486 National Instruments AT-MIO-16E-1 (ni_atmio),
487 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
488 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
489
490 To compile this driver as a module, choose M here: the module will be
491 called ni_atmio.
492
493config COMEDI_NI_ATMIO16D
494 tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support"
495 select COMEDI_8255
496 help
497 Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards.
498
499 To compile this driver as a module, choose M here: the module will be
500 called ni_atmio16d.
501
502config COMEDI_NI_LABPC_ISA
503 tristate "NI Lab-PC and compatibles ISA support"
504 select COMEDI_NI_LABPC
505 help
506 Enable support for National Instruments Lab-PC and compatibles
507 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
508 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
509 not yet been added to the driver.
510
511 To compile this driver as a module, choose M here: the module will be
512 called ni_labpc.
513
514config COMEDI_PCMAD
515 tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
516 help
517 Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
518
519 To compile this driver as a module, choose M here: the module will be
520 called pcmad.
521
522config COMEDI_PCMDA12
523 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
524 help
525 Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
526 Note that the board is not ISA-PNP capable and thus needs the I/O
527 port comedi_config parameter.
528
529 To compile this driver as a module, choose M here: the module will be
530 called pcmda12.
531
532config COMEDI_PCMMIO
533 tristate "Winsystems PCM-MIO PC/104 board support"
534 help
535 Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
536
537 To compile this driver as a module, choose M here: the module will be
538 called pcmmio.
539
540config COMEDI_PCMUIO
541 tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
542 help
543 Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
544
545 To compile this driver as a module, choose M here: the module will be
546 called pcmuio.
547
548config COMEDI_MULTIQ3
549 tristate "Quanser Consulting MultiQ-3 ISA card support"
550 help
551 Enable support for Quanser Consulting MultiQ-3 ISA cards
552
553 To compile this driver as a module, choose M here: the module will be
554 called multiq3.
555
556config COMEDI_S526
557 tristate "Sensoray s526 support"
558 help
559 Enable support for Sensoray s526
560
561 To compile this driver as a module, choose M here: the module will be
562 called s526.
563
564endif # COMEDI_ISA_DRIVERS
565
566menuconfig COMEDI_PCI_DRIVERS
567 tristate "Comedi PCI drivers"
568 depends on PCI
569 help
570 Enable support for comedi PCI drivers.
571
572 To compile this support as a module, choose M here: the module will
573 be called comedi_pci.
574
575if COMEDI_PCI_DRIVERS
576
577config COMEDI_8255_PCI
578 tristate "Generic PCI based 8255 digital i/o board support"
579 select COMEDI_8255
580 help
581 Enable support for PCI based 8255 digital i/o boards. This driver
582 provides a PCI wrapper around the generic 8255 driver.
583
584 Supported boards:
585 ADlink - PCI-7224, PCI-7248, and PCI-7296
586 Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
587 PCI-DIO96H
588 National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
589 PCI-6503B, PCI-6503X, and PXI-6503
590
591 To compile this driver as a module, choose M here: the module will
592 be called 8255_pci.
593
594config COMEDI_ADDI_WATCHDOG
595 tristate
596 depends on HAS_IOPORT
597 help
598 Provides support for the watchdog subdevice found on many ADDI-DATA
599 boards. This module will be automatically selected when needed. The
600 module will be called addi_watchdog.
601
602config COMEDI_ADDI_APCI_1032
603 tristate "ADDI-DATA APCI_1032 support"
604 depends on HAS_IOPORT
605 help
606 Enable support for ADDI-DATA APCI_1032 cards
607
608 To compile this driver as a module, choose M here: the module will be
609 called addi_apci_1032.
610
611config COMEDI_ADDI_APCI_1500
612 tristate "ADDI-DATA APCI_1500 support"
613 depends on HAS_IOPORT
614 help
615 Enable support for ADDI-DATA APCI_1500 cards
616
617 To compile this driver as a module, choose M here: the module will be
618 called addi_apci_1500.
619
620config COMEDI_ADDI_APCI_1516
621 tristate "ADDI-DATA APCI-1016/1516/2016 support"
622 depends on HAS_IOPORT
623 select COMEDI_ADDI_WATCHDOG
624 help
625 Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
626 These are 16 channel, optically isolated, digital I/O boards. The 1516
627 and 2016 boards also have a watchdog for resetting the outputs to "0".
628
629 To compile this driver as a module, choose M here: the module will be
630 called addi_apci_1516.
631
632config COMEDI_ADDI_APCI_1564
633 tristate "ADDI-DATA APCI_1564 support"
634 depends on HAS_IOPORT
635 select COMEDI_ADDI_WATCHDOG
636 help
637 Enable support for ADDI-DATA APCI_1564 cards
638
639 To compile this driver as a module, choose M here: the module will be
640 called addi_apci_1564.
641
642config COMEDI_ADDI_APCI_16XX
643 tristate "ADDI-DATA APCI_16xx support"
644 depends on HAS_IOPORT
645 help
646 Enable support for ADDI-DATA APCI_16xx cards
647
648 To compile this driver as a module, choose M here: the module will be
649 called addi_apci_16xx.
650
651config COMEDI_ADDI_APCI_2032
652 tristate "ADDI-DATA APCI_2032 support"
653 depends on HAS_IOPORT
654 select COMEDI_ADDI_WATCHDOG
655 help
656 Enable support for ADDI-DATA APCI_2032 cards
657
658 To compile this driver as a module, choose M here: the module will be
659 called addi_apci_2032.
660
661config COMEDI_ADDI_APCI_2200
662 tristate "ADDI-DATA APCI_2200 support"
663 depends on HAS_IOPORT
664 select COMEDI_ADDI_WATCHDOG
665 help
666 Enable support for ADDI-DATA APCI_2200 cards
667
668 To compile this driver as a module, choose M here: the module will be
669 called addi_apci_2200.
670
671config COMEDI_ADDI_APCI_3120
672 tristate "ADDI-DATA APCI_3120/3001 support"
673 depends on HAS_IOPORT
674 depends on HAS_DMA
675 help
676 Enable support for ADDI-DATA APCI_3120/3001 cards
677
678 To compile this driver as a module, choose M here: the module will be
679 called addi_apci_3120.
680
681config COMEDI_ADDI_APCI_3501
682 tristate "ADDI-DATA APCI_3501 support"
683 depends on HAS_IOPORT
684 help
685 Enable support for ADDI-DATA APCI_3501 cards
686
687 To compile this driver as a module, choose M here: the module will be
688 called addi_apci_3501.
689
690config COMEDI_ADDI_APCI_3XXX
691 tristate "ADDI-DATA APCI_3xxx support"
692 depends on HAS_IOPORT
693 help
694 Enable support for ADDI-DATA APCI_3xxx cards
695
696 To compile this driver as a module, choose M here: the module will be
697 called addi_apci_3xxx.
698
699config COMEDI_ADL_PCI6208
700 tristate "ADLink PCI-6208A support"
701 depends on HAS_IOPORT
702 help
703 Enable support for ADLink PCI-6208A cards
704
705 To compile this driver as a module, choose M here: the module will be
706 called adl_pci6208.
707
708config COMEDI_ADL_PCI7X3X
709 tristate "ADLink PCI-723X/743X isolated digital i/o board support"
710 depends on HAS_IOPORT
711 help
712 Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
713 Supported boards include the 32-channel PCI-7230 (16 in/16 out),
714 PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
715 PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
716
717 To compile this driver as a module, choose M here: the module will be
718 called adl_pci7x3x.
719
720config COMEDI_ADL_PCI8164
721 tristate "ADLink PCI-8164 4 Axes Motion Control board support"
722 depends on HAS_IOPORT
723 help
724 Enable support for ADlink PCI-8164 4 Axes Motion Control board
725
726 To compile this driver as a module, choose M here: the module will be
727 called adl_pci8164.
728
729config COMEDI_ADL_PCI9111
730 tristate "ADLink PCI-9111HR support"
731 depends on HAS_IOPORT
732 select COMEDI_8254
733 help
734 Enable support for ADlink PCI9111 cards
735
736 To compile this driver as a module, choose M here: the module will be
737 called adl_pci9111.
738
739config COMEDI_ADL_PCI9118
740 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
741 depends on HAS_IOPORT
742 depends on HAS_DMA
743 select COMEDI_8254
744 help
745 Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
746
747 To compile this driver as a module, choose M here: the module will be
748 called adl_pci9118.
749
750config COMEDI_ADV_PCI1710
751 tristate "Advantech PCI-171x and PCI-1731 support"
752 depends on HAS_IOPORT
753 select COMEDI_8254
754 help
755 Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
756 PCI-1713 and PCI-1731
757
758 To compile this driver as a module, choose M here: the module will be
759 called adv_pci1710.
760
761config COMEDI_ADV_PCI1720
762 tristate "Advantech PCI-1720 support"
763 depends on HAS_IOPORT
764 help
765 Enable support for Advantech PCI-1720 Analog Output board.
766
767 To compile this driver as a module, choose M here: the module will be
768 called adv_pci1720.
769
770config COMEDI_ADV_PCI1723
771 tristate "Advantech PCI-1723 support"
772 depends on HAS_IOPORT
773 help
774 Enable support for Advantech PCI-1723 cards
775
776 To compile this driver as a module, choose M here: the module will be
777 called adv_pci1723.
778
779config COMEDI_ADV_PCI1724
780 tristate "Advantech PCI-1724U support"
781 depends on HAS_IOPORT
782 help
783 Enable support for Advantech PCI-1724U cards. These are 32-channel
784 analog output cards with voltage and current loop output ranges and
785 14-bit resolution.
786
787 To compile this driver as a module, choose M here: the module will be
788 called adv_pci1724.
789
790config COMEDI_ADV_PCI1760
791 tristate "Advantech PCI-1760 support"
792 depends on HAS_IOPORT
793 help
794 Enable support for Advantech PCI-1760 board.
795
796 To compile this driver as a module, choose M here: the module will be
797 called adv_pci1760.
798
799config COMEDI_ADV_PCI_DIO
800 tristate "Advantech PCI DIO card support"
801 depends on HAS_IOPORT
802 select COMEDI_8254
803 select COMEDI_8255
804 help
805 Enable support for Advantech PCI DIO cards
806 PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
807 PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
808 PCI-1761 and PCI-1762
809
810 To compile this driver as a module, choose M here: the module will be
811 called adv_pci_dio.
812
813config COMEDI_AMPLC_DIO200_PCI
814 tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
815 select COMEDI_AMPLC_DIO200
816 help
817 Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
818 and PCIe296 DIO boards.
819
820 To compile this driver as a module, choose M here: the module will be
821 called amplc_dio200_pci.
822
823config COMEDI_AMPLC_PC236_PCI
824 tristate "Amplicon PCI236 DIO board support"
825 depends on HAS_IOPORT
826 select COMEDI_AMPLC_PC236
827 help
828 Enable support for Amplicon PCI236 DIO board.
829
830 To compile this driver as a module, choose M here: the module will be
831 called amplc_pci236.
832
833config COMEDI_AMPLC_PC263_PCI
834 tristate "Amplicon PCI263 relay board support"
835 depends on HAS_IOPORT
836 help
837 Enable support for Amplicon PCI263 relay board. This is a PCI board
838 with 16 reed relay output channels.
839
840 To compile this driver as a module, choose M here: the module will be
841 called amplc_pci263.
842
843config COMEDI_AMPLC_PCI224
844 tristate "Amplicon PCI224 and PCI234 support"
845 depends on HAS_IOPORT
846 select COMEDI_8254
847 help
848 Enable support for Amplicon PCI224 and PCI234 AO boards
849
850 To compile this driver as a module, choose M here: the module will be
851 called amplc_pci224.
852
853config COMEDI_AMPLC_PCI230
854 tristate "Amplicon PCI230 and PCI260 support"
855 depends on HAS_IOPORT
856 select COMEDI_8254
857 select COMEDI_8255
858 help
859 Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
860 boards
861
862 To compile this driver as a module, choose M here: the module will be
863 called amplc_pci230.
864
865config COMEDI_CONTEC_PCI_DIO
866 tristate "Contec PIO1616L digital I/O board support"
867 depends on HAS_IOPORT
868 help
869 Enable support for the Contec PIO1616L digital I/O board
870
871 To compile this driver as a module, choose M here: the module will be
872 called contec_pci_dio.
873
874config COMEDI_DAS08_PCI
875 tristate "DAS-08 PCI support"
876 depends on HAS_IOPORT
877 select COMEDI_DAS08
878 help
879 Enable support for PCI DAS-08 cards.
880
881 To compile this driver as a module, choose M here: the module will be
882 called das08_pci.
883
884config COMEDI_DT3000
885 tristate "Data Translation DT3000 series support"
886 help
887 Enable support for Data Translation DT3000 series
888 DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
889 DT3004-200
890
891 To compile this driver as a module, choose M here: the module will be
892 called dt3000.
893
894config COMEDI_DYNA_PCI10XX
895 tristate "Dynalog PCI DAQ series support"
896 depends on HAS_IOPORT
897 help
898 Enable support for Dynalog PCI DAQ series
899 PCI-1050
900
901 To compile this driver as a module, choose M here: the module will be
902 called dyna_pci10xx.
903
904config COMEDI_GSC_HPDI
905 tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
906 help
907 Enable support for General Standards Corporation high speed parallel
908 digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
909 Only receive mode works, transmit not supported.
910
911 To compile this driver as a module, choose M here: the module will be
912 called gsc_hpdi.
913
914config COMEDI_MF6X4
915 tristate "Humusoft MF634 and MF624 DAQ Card support"
916 help
917 This driver supports both Humusoft MF634 and MF624 Data acquisition
918 cards. The legacy Humusoft MF614 card is not supported.
919
920config COMEDI_ICP_MULTI
921 tristate "Inova ICP_MULTI support"
922 help
923 Enable support for Inova ICP_MULTI card
924
925 To compile this driver as a module, choose M here: the module will be
926 called icp_multi.
927
928config COMEDI_DAQBOARD2000
929 tristate "IOtech DAQboard/2000 support"
930 select COMEDI_8255
931 help
932 Enable support for the IOtech DAQboard/2000
933
934 To compile this driver as a module, choose M here: the module will be
935 called daqboard2000.
936
937config COMEDI_JR3_PCI
938 tristate "JR3/PCI force sensor board support"
939 help
940 Enable support for JR3/PCI force sensor boards
941
942 To compile this driver as a module, choose M here: the module will be
943 called jr3_pci.
944
945config COMEDI_KE_COUNTER
946 tristate "Kolter-Electronic PCI Counter 1 card support"
947 depends on HAS_IOPORT
948 help
949 Enable support for Kolter-Electronic PCI Counter 1 cards
950
951 To compile this driver as a module, choose M here: the module will be
952 called ke_counter.
953
954config COMEDI_CB_PCIDAS64
955 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
956 select COMEDI_8255
957 help
958 Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
959 60xx, and 4020 series with the PLX 9080 PCI controller
960
961 To compile this driver as a module, choose M here: the module will be
962 called cb_pcidas64.
963
964config COMEDI_CB_PCIDAS
965 tristate "MeasurementComputing PCI-DAS support"
966 depends on HAS_IOPORT
967 select COMEDI_8254
968 select COMEDI_8255
969 help
970 Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
971 AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
972 PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
973 and PCI_DAS1002.
974
975 To compile this driver as a module, choose M here: the module will be
976 called cb_pcidas.
977
978config COMEDI_CB_PCIDDA
979 tristate "MeasurementComputing PCI-DDA series support"
980 depends on HAS_IOPORT
981 select COMEDI_8255
982 help
983 Enable support for ComputerBoards/MeasurementComputing PCI-DDA
984 series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
985 PCI-DDA04/16 and PCI-DDA02/16
986
987 To compile this driver as a module, choose M here: the module will be
988 called cb_pcidda.
989
990config COMEDI_CB_PCIMDAS
991 tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
992 depends on HAS_IOPORT
993 select COMEDI_8254
994 select COMEDI_8255
995 help
996 Enable support for ComputerBoards/MeasurementComputing PCI Migration
997 series PCIM-DAS1602/16 and PCIe-DAS1602/16.
998
999 To compile this driver as a module, choose M here: the module will be
1000 called cb_pcimdas.
1001
1002config COMEDI_CB_PCIMDDA
1003 tristate "MeasurementComputing PCIM-DDA06-16 support"
1004 depends on HAS_IOPORT
1005 select COMEDI_8255
1006 help
1007 Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
1008
1009 To compile this driver as a module, choose M here: the module will be
1010 called cb_pcimdda.
1011
1012config COMEDI_ME4000
1013 tristate "Meilhaus ME-4000 support"
1014 depends on HAS_IOPORT
1015 select COMEDI_8254
1016 help
1017 Enable support for Meilhaus PCI data acquisition cards
1018 ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
1019
1020 To compile this driver as a module, choose M here: the module will be
1021 called me4000.
1022
1023config COMEDI_ME_DAQ
1024 tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
1025 help
1026 Enable support for Meilhaus PCI data acquisition cards
1027 ME-2000i, ME-2600i and ME-3000vm1
1028
1029 To compile this driver as a module, choose M here: the module will be
1030 called me_daq.
1031
1032config COMEDI_NI_6527
1033 tristate "NI 6527 support"
1034 help
1035 Enable support for the National Instruments 6527 PCI card
1036
1037 To compile this driver as a module, choose M here: the module will be
1038 called ni_6527.
1039
1040config COMEDI_NI_65XX
1041 tristate "NI 65xx static dio PCI card support"
1042 help
1043 Enable support for National Instruments 65xx static dio boards.
1044 Supported devices: National Instruments PCI-6509 (ni_65xx),
1045 PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
1046 PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
1047 PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
1048
1049 To compile this driver as a module, choose M here: the module will be
1050 called ni_65xx.
1051
1052config COMEDI_NI_660X
1053 tristate "NI 660x counter/timer PCI card support"
1054 depends on HAS_DMA
1055 select COMEDI_NI_TIOCMD
1056 help
1057 Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1058 PXI-6602, PXI-6608, PCI-6624, and PXI-6624.
1059
1060 To compile this driver as a module, choose M here: the module will be
1061 called ni_660x.
1062
1063config COMEDI_NI_670X
1064 tristate "NI 670x PCI card support"
1065 help
1066 Enable support for National Instruments PCI-6703 and PCI-6704
1067
1068 To compile this driver as a module, choose M here: the module will be
1069 called ni_670x.
1070
1071config COMEDI_NI_LABPC_PCI
1072 tristate "NI Lab-PC PCI-1200 support"
1073 select COMEDI_NI_LABPC
1074 help
1075 Enable support for National Instruments Lab-PC PCI-1200.
1076
1077 To compile this driver as a module, choose M here: the module will be
1078 called ni_labpc_pci.
1079
1080config COMEDI_NI_PCIDIO
1081 tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1082 depends on HAS_DMA
1083 select COMEDI_MITE
1084 help
1085 Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1086 PCI-6533 and PCI-6534
1087
1088 To compile this driver as a module, choose M here: the module will be
1089 called ni_pcidio.
1090
1091config COMEDI_NI_PCIMIO
1092 tristate "NI PCI-MIO-E series and M series support"
1093 depends on HAS_DMA
1094 select COMEDI_NI_TIOCMD
1095 select COMEDI_8255
1096 help
1097 Enable support for National Instruments PCI-MIO-E series and M series
1098 (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1099 PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1100 PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1101 PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1102 PCI-6220, PXI-6220, PCI-6221, PXI-6221, PCI-6224, PXI-6224, PCI-6225,
1103 PXI-6225, PCI-6229, PXI-6229, PCI-6250, PXI-6250, PCI-6251, PXI-6251,
1104 PCIe-6251, PXIe-6251, PCI-6254, PXI-6254, PCI-6259, PXI-6259,
1105 PCIe-6259, PXIe-6259, PCI-6280, PXI-6280, PCI-6281, PXI-6281,
1106 PCI-6284, PXI-6284, PCI-6289, PXI-6289, PCI-6711, PXI-6711,
1107 PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1108 PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1109
1110 To compile this driver as a module, choose M here: the module will be
1111 called ni_pcimio.
1112
1113config COMEDI_RTD520
1114 tristate "Real Time Devices PCI4520/DM7520 support"
1115 select COMEDI_8254
1116 help
1117 Enable support for Real Time Devices PCI4520/DM7520
1118
1119 To compile this driver as a module, choose M here: the module will be
1120 called rtd520.
1121
1122config COMEDI_S626
1123 tristate "Sensoray 626 support"
1124 help
1125 Enable support for Sensoray 626
1126
1127 To compile this driver as a module, choose M here: the module will be
1128 called s626.
1129
1130config COMEDI_MITE
1131 depends on HAS_DMA
1132 tristate
1133
1134config COMEDI_NI_TIOCMD
1135 tristate
1136 depends on HAS_DMA
1137 select COMEDI_NI_TIO
1138 select COMEDI_MITE
1139
1140endif # COMEDI_PCI_DRIVERS
1141
1142menuconfig COMEDI_PCMCIA_DRIVERS
1143 tristate "Comedi PCMCIA drivers"
1144 depends on PCMCIA && HAS_IOPORT
1145 help
1146 Enable support for comedi PCMCIA drivers.
1147
1148 To compile this support as a module, choose M here: the module will
1149 be called comedi_pcmcia.
1150
1151if COMEDI_PCMCIA_DRIVERS
1152
1153config COMEDI_CB_DAS16_CS
1154 tristate "CB DAS16 series PCMCIA support"
1155 select COMEDI_8254
1156 help
1157 Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1158 cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1159
1160 To compile this driver as a module, choose M here: the module will be
1161 called cb_das16_cs.
1162
1163config COMEDI_DAS08_CS
1164 tristate "CB DAS08 PCMCIA support"
1165 select COMEDI_DAS08
1166 help
1167 Enable support for the ComputerBoards/MeasurementComputing DAS-08
1168 PCMCIA card
1169
1170 To compile this driver as a module, choose M here: the module will be
1171 called das08_cs.
1172
1173config COMEDI_NI_DAQ_700_CS
1174 tristate "NI DAQCard-700 PCMCIA support"
1175 help
1176 Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1177
1178 To compile this driver as a module, choose M here: the module will be
1179 called ni_daq_700.
1180
1181config COMEDI_NI_DAQ_DIO24_CS
1182 tristate "NI DAQ-Card DIO-24 PCMCIA support"
1183 select COMEDI_8255
1184 help
1185 Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1186
1187 To compile this driver as a module, choose M here: the module will be
1188 called ni_daq_dio24.
1189
1190config COMEDI_NI_LABPC_CS
1191 tristate "NI DAQCard-1200 PCMCIA support"
1192 select COMEDI_NI_LABPC
1193 help
1194 Enable support for the National Instruments PCMCIA DAQCard-1200
1195
1196 To compile this driver as a module, choose M here: the module will be
1197 called ni_labpc_cs.
1198
1199config COMEDI_NI_MIO_CS
1200 tristate "NI DAQCard E series PCMCIA support"
1201 select COMEDI_NI_TIO
1202 select COMEDI_8255
1203 help
1204 Enable support for the National Instruments PCMCIA DAQCard E series
1205 DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1206 and DAQCard-6036E
1207
1208 To compile this driver as a module, choose M here: the module will be
1209 called ni_mio_cs.
1210
1211config COMEDI_QUATECH_DAQP_CS
1212 tristate "Quatech DAQP PCMCIA data capture card support"
1213 help
1214 Enable support for the Quatech DAQP PCMCIA data capture cards
1215 DAQP-208 and DAQP-308
1216
1217 To compile this driver as a module, choose M here: the module will be
1218 called quatech_daqp_cs.
1219
1220endif # COMEDI_PCMCIA_DRIVERS
1221
1222menuconfig COMEDI_USB_DRIVERS
1223 tristate "Comedi USB drivers"
1224 depends on USB
1225 help
1226 Enable support for comedi USB drivers.
1227
1228 To compile this support as a module, choose M here: the module will
1229 be called comedi_usb.
1230
1231if COMEDI_USB_DRIVERS
1232
1233config COMEDI_DT9812
1234 tristate "DataTranslation DT9812 USB module support"
1235 help
1236 Enable support for the Data Translation DT9812 USB module
1237
1238 To compile this driver as a module, choose M here: the module will be
1239 called dt9812.
1240
1241config COMEDI_NI_USB6501
1242 tristate "NI USB-6501 support"
1243 help
1244 Enable support for the National Instruments USB-6501 module.
1245
1246 The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that
1247 provides 24 digital I/O lines channels and one 32-bit counter.
1248
1249 To compile this driver as a module, choose M here: the module will be
1250 called ni_usb6501.
1251
1252config COMEDI_USBDUX
1253 tristate "ITL USB-DUX-D support"
1254 help
1255 Enable support for the Incite Technology Ltd USB-DUX-D Board
1256
1257 To compile this driver as a module, choose M here: the module will be
1258 called usbdux.
1259
1260config COMEDI_USBDUXFAST
1261 tristate "ITL USB-DUXfast support"
1262 help
1263 Enable support for the Incite Technology Ltd USB-DUXfast Board
1264
1265 To compile this driver as a module, choose M here: the module will be
1266 called usbduxfast.
1267
1268config COMEDI_USBDUXSIGMA
1269 tristate "ITL USB-DUXsigma support"
1270 help
1271 Enable support for the Incite Technology Ltd USB-DUXsigma Board
1272
1273 To compile this driver as a module, choose M here: the module will be
1274 called usbduxsigma.
1275
1276config COMEDI_VMK80XX
1277 tristate "Velleman VM110/VM140 USB Board support"
1278 help
1279 Build the Velleman USB Board Low-Level Driver supporting the
1280 K8055/K8061 aka VM110/VM140 devices
1281
1282 To compile this driver as a module, choose M here: the module will be
1283 called vmk80xx.
1284
1285endif # COMEDI_USB_DRIVERS
1286
1287config COMEDI_8254
1288 tristate
1289
1290config COMEDI_8255
1291 tristate
1292
1293config COMEDI_8255_SA
1294 tristate "Standalone 8255 support"
1295 depends on HAS_IOPORT
1296 select COMEDI_8255
1297 help
1298 Enable support for 8255 digital I/O as a standalone driver.
1299
1300 You should enable compilation this driver if you plan to use a board
1301 that has an 8255 chip at a known I/O base address and there are no
1302 other Comedi drivers for the board.
1303
1304 Note that Comedi drivers for most multi-function boards incorporating
1305 an 8255 chip use the 'comedi_8255' module. Most PCI-based 8255
1306 boards use the 8255_pci driver as a wrapper around the 'comedi_8255'
1307 module.
1308
1309 To compile this driver as a module, choose M here: the module will be
1310 called 8255.
1311
1312config COMEDI_KCOMEDILIB
1313 tristate "Comedi kcomedilib"
1314 help
1315 Build the kcomedilib.
1316
1317 This is a kernel module used to open and manipulate Comedi devices
1318 from within kernel code. It is currently only used by the
1319 comedi_bond driver, and its functionality has been stripped down to
1320 the needs of that driver, so is currently not very useful for
1321 anything else.
1322
1323 To compile kcomedilib as a module, choose M here: the module will be
1324 called kcomedilib.
1325
1326config COMEDI_AMPLC_DIO200
1327 select COMEDI_8254
1328 tristate
1329
1330config COMEDI_AMPLC_PC236
1331 tristate
1332 depends on HAS_IOPORT
1333 select COMEDI_8255
1334
1335config COMEDI_DAS08
1336 tristate
1337 depends on HAS_IOPORT
1338 select COMEDI_8254
1339 select COMEDI_8255
1340
1341config COMEDI_ISADMA
1342 tristate
1343
1344config COMEDI_NI_LABPC
1345 tristate
1346 select COMEDI_8254
1347 select COMEDI_8255
1348
1349config COMEDI_NI_LABPC_ISADMA
1350 tristate
1351 default COMEDI_NI_LABPC
1352 depends on COMEDI_NI_LABPC_ISA != n
1353 depends on ISA_DMA_API
1354 select COMEDI_ISADMA
1355
1356config COMEDI_NI_TIO
1357 tristate
1358 select COMEDI_NI_ROUTING
1359
1360config COMEDI_NI_ROUTING
1361 tristate
1362
1363config COMEDI_TESTS
1364 tristate "Comedi unit tests"
1365 help
1366 Enable comedi unit-test modules to be built.
1367
1368 Note that the answer to this question won't directly affect the
1369 kernel: saying N will just cause the configurator to skip all
1370 the questions about comedi unit-test modules.
1371
1372if COMEDI_TESTS
1373
1374config COMEDI_TESTS_EXAMPLE
1375 tristate "Comedi example unit-test module"
1376 help
1377 Enable support for an example unit-test module. This is just a
1378 silly example to be used as a basis for writing other unit-test
1379 modules.
1380
1381 To compile this as a module, choose M here: the module will be called
1382 comedi_example_test.
1383
1384config COMEDI_TESTS_NI_ROUTES
1385 tristate "NI routing unit-test module"
1386 select COMEDI_NI_ROUTING
1387 help
1388 Enable support for a unit-test module to test the signal routing
1389 code used by comedi drivers for various National Instruments cards.
1390
1391 To compile this as a module, choose M here: the module will be called
1392 ni_routes_test.
1393
1394endif # COMEDI_TESTS
1395
1396endif # COMEDI