Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 *
4 * Generic Bluetooth USB driver
5 *
6 * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
7 */
8
9#include <linux/dmi.h>
10#include <linux/module.h>
11#include <linux/usb.h>
12#include <linux/usb/quirks.h>
13#include <linux/firmware.h>
14#include <linux/iopoll.h>
15#include <linux/of_device.h>
16#include <linux/of_irq.h>
17#include <linux/suspend.h>
18#include <linux/gpio/consumer.h>
19#include <asm/unaligned.h>
20
21#include <net/bluetooth/bluetooth.h>
22#include <net/bluetooth/hci_core.h>
23
24#include "btintel.h"
25#include "btbcm.h"
26#include "btrtl.h"
27
28#define VERSION "0.8"
29
30static bool disable_scofix;
31static bool force_scofix;
32static bool enable_autosuspend = IS_ENABLED(CONFIG_BT_HCIBTUSB_AUTOSUSPEND);
33
34static bool reset = true;
35
36static struct usb_driver btusb_driver;
37
38#define BTUSB_IGNORE 0x01
39#define BTUSB_DIGIANSWER 0x02
40#define BTUSB_CSR 0x04
41#define BTUSB_SNIFFER 0x08
42#define BTUSB_BCM92035 0x10
43#define BTUSB_BROKEN_ISOC 0x20
44#define BTUSB_WRONG_SCO_MTU 0x40
45#define BTUSB_ATH3012 0x80
46#define BTUSB_INTEL 0x100
47#define BTUSB_INTEL_BOOT 0x200
48#define BTUSB_BCM_PATCHRAM 0x400
49#define BTUSB_MARVELL 0x800
50#define BTUSB_SWAVE 0x1000
51#define BTUSB_INTEL_NEW 0x2000
52#define BTUSB_AMP 0x4000
53#define BTUSB_QCA_ROME 0x8000
54#define BTUSB_BCM_APPLE 0x10000
55#define BTUSB_REALTEK 0x20000
56#define BTUSB_BCM2045 0x40000
57#define BTUSB_IFNUM_2 0x80000
58#define BTUSB_CW6622 0x100000
59#define BTUSB_MEDIATEK 0x200000
60#define BTUSB_WIDEBAND_SPEECH 0x400000
61#define BTUSB_VALID_LE_STATES 0x800000
62
63static const struct usb_device_id btusb_table[] = {
64 /* Generic Bluetooth USB device */
65 { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
66
67 /* Generic Bluetooth AMP device */
68 { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
69
70 /* Generic Bluetooth USB interface */
71 { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
72
73 /* Apple-specific (Broadcom) devices */
74 { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
75 .driver_info = BTUSB_BCM_APPLE | BTUSB_IFNUM_2 },
76
77 /* MediaTek MT76x0E */
78 { USB_DEVICE(0x0e8d, 0x763f) },
79
80 /* Broadcom SoftSailing reporting vendor specific */
81 { USB_DEVICE(0x0a5c, 0x21e1) },
82
83 /* Apple MacBookPro 7,1 */
84 { USB_DEVICE(0x05ac, 0x8213) },
85
86 /* Apple iMac11,1 */
87 { USB_DEVICE(0x05ac, 0x8215) },
88
89 /* Apple MacBookPro6,2 */
90 { USB_DEVICE(0x05ac, 0x8218) },
91
92 /* Apple MacBookAir3,1, MacBookAir3,2 */
93 { USB_DEVICE(0x05ac, 0x821b) },
94
95 /* Apple MacBookAir4,1 */
96 { USB_DEVICE(0x05ac, 0x821f) },
97
98 /* Apple MacBookPro8,2 */
99 { USB_DEVICE(0x05ac, 0x821a) },
100
101 /* Apple MacMini5,1 */
102 { USB_DEVICE(0x05ac, 0x8281) },
103
104 /* AVM BlueFRITZ! USB v2.0 */
105 { USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE },
106
107 /* Bluetooth Ultraport Module from IBM */
108 { USB_DEVICE(0x04bf, 0x030a) },
109
110 /* ALPS Modules with non-standard id */
111 { USB_DEVICE(0x044e, 0x3001) },
112 { USB_DEVICE(0x044e, 0x3002) },
113
114 /* Ericsson with non-standard id */
115 { USB_DEVICE(0x0bdb, 0x1002) },
116
117 /* Canyon CN-BTU1 with HID interfaces */
118 { USB_DEVICE(0x0c10, 0x0000) },
119
120 /* Broadcom BCM20702A0 */
121 { USB_DEVICE(0x413c, 0x8197) },
122
123 /* Broadcom BCM20702B0 (Dynex/Insignia) */
124 { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
125
126 /* Broadcom BCM43142A0 (Foxconn/Lenovo) */
127 { USB_VENDOR_AND_INTERFACE_INFO(0x105b, 0xff, 0x01, 0x01),
128 .driver_info = BTUSB_BCM_PATCHRAM },
129
130 /* Broadcom BCM920703 (HTC Vive) */
131 { USB_VENDOR_AND_INTERFACE_INFO(0x0bb4, 0xff, 0x01, 0x01),
132 .driver_info = BTUSB_BCM_PATCHRAM },
133
134 /* Foxconn - Hon Hai */
135 { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
136 .driver_info = BTUSB_BCM_PATCHRAM },
137
138 /* Lite-On Technology - Broadcom based */
139 { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
140 .driver_info = BTUSB_BCM_PATCHRAM },
141
142 /* Broadcom devices with vendor specific id */
143 { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
144 .driver_info = BTUSB_BCM_PATCHRAM },
145
146 /* ASUSTek Computer - Broadcom based */
147 { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
148 .driver_info = BTUSB_BCM_PATCHRAM },
149
150 /* Belkin F8065bf - Broadcom based */
151 { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
152 .driver_info = BTUSB_BCM_PATCHRAM },
153
154 /* IMC Networks - Broadcom based */
155 { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
156 .driver_info = BTUSB_BCM_PATCHRAM },
157
158 /* Dell Computer - Broadcom based */
159 { USB_VENDOR_AND_INTERFACE_INFO(0x413c, 0xff, 0x01, 0x01),
160 .driver_info = BTUSB_BCM_PATCHRAM },
161
162 /* Toshiba Corp - Broadcom based */
163 { USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
164 .driver_info = BTUSB_BCM_PATCHRAM },
165
166 /* Intel Bluetooth USB Bootloader (RAM module) */
167 { USB_DEVICE(0x8087, 0x0a5a),
168 .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
169
170 { } /* Terminating entry */
171};
172
173MODULE_DEVICE_TABLE(usb, btusb_table);
174
175static const struct usb_device_id blacklist_table[] = {
176 /* CSR BlueCore devices */
177 { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR },
178
179 /* Broadcom BCM2033 without firmware */
180 { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
181
182 /* Broadcom BCM2045 devices */
183 { USB_DEVICE(0x0a5c, 0x2045), .driver_info = BTUSB_BCM2045 },
184
185 /* Atheros 3011 with sflash firmware */
186 { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
187 { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
188 { USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
189 { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
190 { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
191 { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
192 { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
193
194 /* Atheros AR9285 Malbec with sflash firmware */
195 { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
196
197 /* Atheros 3012 with sflash firmware */
198 { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
199 { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
200 { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
201 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
202 { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
203 { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
204 { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
205 { USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 },
206 { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
207 { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
208 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
209 { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
210 { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
211 { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
212 { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
213 { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
214 { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
215 { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
216 { USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
217 { USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 },
218 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
219 { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
220 { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
221 { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
222 { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
223 { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
224 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
225 { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
226 { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
227 { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
228 { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
229 { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
230 { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
231 { USB_DEVICE(0x0cf3, 0x817b), .driver_info = BTUSB_ATH3012 },
232 { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
233 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
234 { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
235 { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
236 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
237 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
238 { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
239 { USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 },
240 { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
241 { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
242 { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
243 { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
244 { USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
245 { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
246 { USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
247 { USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 },
248
249 /* Atheros AR5BBU12 with sflash firmware */
250 { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
251
252 /* Atheros AR5BBU12 with sflash firmware */
253 { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
254 { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
255
256 /* QCA ROME chipset */
257 { USB_DEVICE(0x0cf3, 0x535b), .driver_info = BTUSB_QCA_ROME },
258 { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
259 { USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME },
260 { USB_DEVICE(0x0cf3, 0xe010), .driver_info = BTUSB_QCA_ROME },
261 { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
262 { USB_DEVICE(0x0cf3, 0xe301), .driver_info = BTUSB_QCA_ROME },
263 { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
264 { USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME },
265 { USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME },
266 { USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME },
267 { USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME },
268 { USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME },
269 { USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME },
270 { USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME },
271 { USB_DEVICE(0x04ca, 0x3021), .driver_info = BTUSB_QCA_ROME },
272 { USB_DEVICE(0x13d3, 0x3491), .driver_info = BTUSB_QCA_ROME },
273 { USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME },
274 { USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME },
275
276 /* Broadcom BCM2035 */
277 { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
278 { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
279 { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
280
281 /* Broadcom BCM2045 */
282 { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU },
283 { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU },
284
285 /* IBM/Lenovo ThinkPad with Broadcom chip */
286 { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU },
287 { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU },
288
289 /* HP laptop with Broadcom chip */
290 { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU },
291
292 /* Dell laptop with Broadcom chip */
293 { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU },
294
295 /* Dell Wireless 370 and 410 devices */
296 { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU },
297 { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU },
298
299 /* Belkin F8T012 and F8T013 devices */
300 { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU },
301 { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU },
302
303 /* Asus WL-BTD202 device */
304 { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU },
305
306 /* Kensington Bluetooth USB adapter */
307 { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU },
308
309 /* RTX Telecom based adapters with buggy SCO support */
310 { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
311 { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },
312
313 /* CONWISE Technology based adapters with buggy SCO support */
314 { USB_DEVICE(0x0e5e, 0x6622),
315 .driver_info = BTUSB_BROKEN_ISOC | BTUSB_CW6622},
316
317 /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
318 { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },
319
320 /* Digianswer devices */
321 { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
322 { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
323
324 /* CSR BlueCore Bluetooth Sniffer */
325 { USB_DEVICE(0x0a12, 0x0002),
326 .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
327
328 /* Frontline ComProbe Bluetooth Sniffer */
329 { USB_DEVICE(0x16d3, 0x0002),
330 .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
331
332 /* Marvell Bluetooth devices */
333 { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
334 { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },
335 { USB_DEVICE(0x1286, 0x204e), .driver_info = BTUSB_MARVELL },
336
337 /* Intel Bluetooth devices */
338 { USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_NEW |
339 BTUSB_WIDEBAND_SPEECH |
340 BTUSB_VALID_LE_STATES },
341 { USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_NEW |
342 BTUSB_WIDEBAND_SPEECH },
343 { USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_NEW |
344 BTUSB_WIDEBAND_SPEECH },
345 { USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_NEW |
346 BTUSB_WIDEBAND_SPEECH},
347 { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
348 { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
349 { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
350 { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW |
351 BTUSB_WIDEBAND_SPEECH },
352 { USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL |
353 BTUSB_WIDEBAND_SPEECH },
354 { USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_NEW |
355 BTUSB_WIDEBAND_SPEECH |
356 BTUSB_VALID_LE_STATES },
357
358 /* Other Intel Bluetooth devices */
359 { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
360 .driver_info = BTUSB_IGNORE },
361
362 /* Realtek 8822CE Bluetooth devices */
363 { USB_DEVICE(0x0bda, 0xb00c), .driver_info = BTUSB_REALTEK |
364 BTUSB_WIDEBAND_SPEECH },
365
366 /* Realtek Bluetooth devices */
367 { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
368 .driver_info = BTUSB_REALTEK },
369
370 /* MediaTek Bluetooth devices */
371 { USB_VENDOR_AND_INTERFACE_INFO(0x0e8d, 0xe0, 0x01, 0x01),
372 .driver_info = BTUSB_MEDIATEK },
373
374 /* Additional Realtek 8723AE Bluetooth devices */
375 { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
376 { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
377
378 /* Additional Realtek 8723BE Bluetooth devices */
379 { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK },
380 { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK },
381 { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK },
382 { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK },
383 { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
384 { USB_DEVICE(0x13d3, 0x3494), .driver_info = BTUSB_REALTEK },
385
386 /* Additional Realtek 8723BU Bluetooth devices */
387 { USB_DEVICE(0x7392, 0xa611), .driver_info = BTUSB_REALTEK },
388
389 /* Additional Realtek 8723DE Bluetooth devices */
390 { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK },
391 { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
392
393 /* Additional Realtek 8821AE Bluetooth devices */
394 { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
395 { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
396 { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK },
397 { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
398 { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
399
400 /* Additional Realtek 8822BE Bluetooth devices */
401 { USB_DEVICE(0x13d3, 0x3526), .driver_info = BTUSB_REALTEK },
402 { USB_DEVICE(0x0b05, 0x185c), .driver_info = BTUSB_REALTEK },
403
404 /* Additional Realtek 8822CE Bluetooth devices */
405 { USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK },
406 { USB_DEVICE(0x13d3, 0x3548), .driver_info = BTUSB_REALTEK },
407
408 /* Silicon Wave based devices */
409 { USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
410
411 { } /* Terminating entry */
412};
413
414/* The Bluetooth USB module build into some devices needs to be reset on resume,
415 * this is a problem with the platform (likely shutting off all power) not with
416 * the module itself. So we use a DMI list to match known broken platforms.
417 */
418static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
419 {
420 /* Dell OptiPlex 3060 (QCA ROME device 0cf3:e007) */
421 .matches = {
422 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
423 DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 3060"),
424 },
425 },
426 {
427 /* Dell XPS 9360 (QCA ROME device 0cf3:e300) */
428 .matches = {
429 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
430 DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9360"),
431 },
432 },
433 {
434 /* Dell Inspiron 5565 (QCA ROME device 0cf3:e009) */
435 .matches = {
436 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
437 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5565"),
438 },
439 },
440 {}
441};
442
443#define BTUSB_MAX_ISOC_FRAMES 10
444
445#define BTUSB_INTR_RUNNING 0
446#define BTUSB_BULK_RUNNING 1
447#define BTUSB_ISOC_RUNNING 2
448#define BTUSB_SUSPENDING 3
449#define BTUSB_DID_ISO_RESUME 4
450#define BTUSB_BOOTLOADER 5
451#define BTUSB_DOWNLOADING 6
452#define BTUSB_FIRMWARE_LOADED 7
453#define BTUSB_FIRMWARE_FAILED 8
454#define BTUSB_BOOTING 9
455#define BTUSB_DIAG_RUNNING 10
456#define BTUSB_OOB_WAKE_ENABLED 11
457#define BTUSB_HW_RESET_ACTIVE 12
458#define BTUSB_TX_WAIT_VND_EVT 13
459#define BTUSB_WAKEUP_DISABLE 14
460#define BTUSB_USE_ALT1_FOR_WBS 15
461
462struct btusb_data {
463 struct hci_dev *hdev;
464 struct usb_device *udev;
465 struct usb_interface *intf;
466 struct usb_interface *isoc;
467 struct usb_interface *diag;
468 unsigned isoc_ifnum;
469
470 unsigned long flags;
471
472 struct work_struct work;
473 struct work_struct waker;
474
475 struct usb_anchor deferred;
476 struct usb_anchor tx_anchor;
477 int tx_in_flight;
478 spinlock_t txlock;
479
480 struct usb_anchor intr_anchor;
481 struct usb_anchor bulk_anchor;
482 struct usb_anchor isoc_anchor;
483 struct usb_anchor diag_anchor;
484 struct usb_anchor ctrl_anchor;
485 spinlock_t rxlock;
486
487 struct sk_buff *evt_skb;
488 struct sk_buff *acl_skb;
489 struct sk_buff *sco_skb;
490
491 struct usb_endpoint_descriptor *intr_ep;
492 struct usb_endpoint_descriptor *bulk_tx_ep;
493 struct usb_endpoint_descriptor *bulk_rx_ep;
494 struct usb_endpoint_descriptor *isoc_tx_ep;
495 struct usb_endpoint_descriptor *isoc_rx_ep;
496 struct usb_endpoint_descriptor *diag_tx_ep;
497 struct usb_endpoint_descriptor *diag_rx_ep;
498
499 struct gpio_desc *reset_gpio;
500
501 __u8 cmdreq_type;
502 __u8 cmdreq;
503
504 unsigned int sco_num;
505 unsigned int air_mode;
506 bool usb_alt6_packet_flow;
507 int isoc_altsetting;
508 int suspend_count;
509
510 int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
511 int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
512
513 int (*setup_on_usb)(struct hci_dev *hdev);
514
515 int oob_wake_irq; /* irq for out-of-band wake-on-bt */
516 unsigned cmd_timeout_cnt;
517};
518
519static void btusb_intel_cmd_timeout(struct hci_dev *hdev)
520{
521 struct btusb_data *data = hci_get_drvdata(hdev);
522 struct gpio_desc *reset_gpio = data->reset_gpio;
523
524 if (++data->cmd_timeout_cnt < 5)
525 return;
526
527 if (!reset_gpio) {
528 bt_dev_err(hdev, "No way to reset. Ignoring and continuing");
529 return;
530 }
531
532 /*
533 * Toggle the hard reset line if the platform provides one. The reset
534 * is going to yank the device off the USB and then replug. So doing
535 * once is enough. The cleanup is handled correctly on the way out
536 * (standard USB disconnect), and the new device is detected cleanly
537 * and bound to the driver again like it should be.
538 */
539 if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
540 bt_dev_err(hdev, "last reset failed? Not resetting again");
541 return;
542 }
543
544 bt_dev_err(hdev, "Initiating HW reset via gpio");
545 gpiod_set_value_cansleep(reset_gpio, 1);
546 msleep(100);
547 gpiod_set_value_cansleep(reset_gpio, 0);
548}
549
550static void btusb_rtl_cmd_timeout(struct hci_dev *hdev)
551{
552 struct btusb_data *data = hci_get_drvdata(hdev);
553 struct gpio_desc *reset_gpio = data->reset_gpio;
554
555 if (++data->cmd_timeout_cnt < 5)
556 return;
557
558 if (!reset_gpio) {
559 bt_dev_err(hdev, "No gpio to reset Realtek device, ignoring");
560 return;
561 }
562
563 /* Toggle the hard reset line. The Realtek device is going to
564 * yank itself off the USB and then replug. The cleanup is handled
565 * correctly on the way out (standard USB disconnect), and the new
566 * device is detected cleanly and bound to the driver again like
567 * it should be.
568 */
569 if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
570 bt_dev_err(hdev, "last reset failed? Not resetting again");
571 return;
572 }
573
574 bt_dev_err(hdev, "Reset Realtek device via gpio");
575 gpiod_set_value_cansleep(reset_gpio, 1);
576 msleep(200);
577 gpiod_set_value_cansleep(reset_gpio, 0);
578}
579
580static void btusb_qca_cmd_timeout(struct hci_dev *hdev)
581{
582 struct btusb_data *data = hci_get_drvdata(hdev);
583 int err;
584
585 if (++data->cmd_timeout_cnt < 5)
586 return;
587
588 bt_dev_err(hdev, "Multiple cmd timeouts seen. Resetting usb device.");
589 /* This is not an unbalanced PM reference since the device will reset */
590 err = usb_autopm_get_interface(data->intf);
591 if (!err)
592 usb_queue_reset_device(data->intf);
593 else
594 bt_dev_err(hdev, "Failed usb_autopm_get_interface with %d", err);
595}
596
597static inline void btusb_free_frags(struct btusb_data *data)
598{
599 unsigned long flags;
600
601 spin_lock_irqsave(&data->rxlock, flags);
602
603 kfree_skb(data->evt_skb);
604 data->evt_skb = NULL;
605
606 kfree_skb(data->acl_skb);
607 data->acl_skb = NULL;
608
609 kfree_skb(data->sco_skb);
610 data->sco_skb = NULL;
611
612 spin_unlock_irqrestore(&data->rxlock, flags);
613}
614
615static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
616{
617 struct sk_buff *skb;
618 unsigned long flags;
619 int err = 0;
620
621 spin_lock_irqsave(&data->rxlock, flags);
622 skb = data->evt_skb;
623
624 while (count) {
625 int len;
626
627 if (!skb) {
628 skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC);
629 if (!skb) {
630 err = -ENOMEM;
631 break;
632 }
633
634 hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
635 hci_skb_expect(skb) = HCI_EVENT_HDR_SIZE;
636 }
637
638 len = min_t(uint, hci_skb_expect(skb), count);
639 skb_put_data(skb, buffer, len);
640
641 count -= len;
642 buffer += len;
643 hci_skb_expect(skb) -= len;
644
645 if (skb->len == HCI_EVENT_HDR_SIZE) {
646 /* Complete event header */
647 hci_skb_expect(skb) = hci_event_hdr(skb)->plen;
648
649 if (skb_tailroom(skb) < hci_skb_expect(skb)) {
650 kfree_skb(skb);
651 skb = NULL;
652
653 err = -EILSEQ;
654 break;
655 }
656 }
657
658 if (!hci_skb_expect(skb)) {
659 /* Complete frame */
660 data->recv_event(data->hdev, skb);
661 skb = NULL;
662 }
663 }
664
665 data->evt_skb = skb;
666 spin_unlock_irqrestore(&data->rxlock, flags);
667
668 return err;
669}
670
671static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
672{
673 struct sk_buff *skb;
674 unsigned long flags;
675 int err = 0;
676
677 spin_lock_irqsave(&data->rxlock, flags);
678 skb = data->acl_skb;
679
680 while (count) {
681 int len;
682
683 if (!skb) {
684 skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
685 if (!skb) {
686 err = -ENOMEM;
687 break;
688 }
689
690 hci_skb_pkt_type(skb) = HCI_ACLDATA_PKT;
691 hci_skb_expect(skb) = HCI_ACL_HDR_SIZE;
692 }
693
694 len = min_t(uint, hci_skb_expect(skb), count);
695 skb_put_data(skb, buffer, len);
696
697 count -= len;
698 buffer += len;
699 hci_skb_expect(skb) -= len;
700
701 if (skb->len == HCI_ACL_HDR_SIZE) {
702 __le16 dlen = hci_acl_hdr(skb)->dlen;
703
704 /* Complete ACL header */
705 hci_skb_expect(skb) = __le16_to_cpu(dlen);
706
707 if (skb_tailroom(skb) < hci_skb_expect(skb)) {
708 kfree_skb(skb);
709 skb = NULL;
710
711 err = -EILSEQ;
712 break;
713 }
714 }
715
716 if (!hci_skb_expect(skb)) {
717 /* Complete frame */
718 hci_recv_frame(data->hdev, skb);
719 skb = NULL;
720 }
721 }
722
723 data->acl_skb = skb;
724 spin_unlock_irqrestore(&data->rxlock, flags);
725
726 return err;
727}
728
729static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
730{
731 struct sk_buff *skb;
732 unsigned long flags;
733 int err = 0;
734
735 spin_lock_irqsave(&data->rxlock, flags);
736 skb = data->sco_skb;
737
738 while (count) {
739 int len;
740
741 if (!skb) {
742 skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC);
743 if (!skb) {
744 err = -ENOMEM;
745 break;
746 }
747
748 hci_skb_pkt_type(skb) = HCI_SCODATA_PKT;
749 hci_skb_expect(skb) = HCI_SCO_HDR_SIZE;
750 }
751
752 len = min_t(uint, hci_skb_expect(skb), count);
753 skb_put_data(skb, buffer, len);
754
755 count -= len;
756 buffer += len;
757 hci_skb_expect(skb) -= len;
758
759 if (skb->len == HCI_SCO_HDR_SIZE) {
760 /* Complete SCO header */
761 hci_skb_expect(skb) = hci_sco_hdr(skb)->dlen;
762
763 if (skb_tailroom(skb) < hci_skb_expect(skb)) {
764 kfree_skb(skb);
765 skb = NULL;
766
767 err = -EILSEQ;
768 break;
769 }
770 }
771
772 if (!hci_skb_expect(skb)) {
773 /* Complete frame */
774 hci_recv_frame(data->hdev, skb);
775 skb = NULL;
776 }
777 }
778
779 data->sco_skb = skb;
780 spin_unlock_irqrestore(&data->rxlock, flags);
781
782 return err;
783}
784
785static void btusb_intr_complete(struct urb *urb)
786{
787 struct hci_dev *hdev = urb->context;
788 struct btusb_data *data = hci_get_drvdata(hdev);
789 int err;
790
791 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
792 urb->actual_length);
793
794 if (!test_bit(HCI_RUNNING, &hdev->flags))
795 return;
796
797 if (urb->status == 0) {
798 hdev->stat.byte_rx += urb->actual_length;
799
800 if (btusb_recv_intr(data, urb->transfer_buffer,
801 urb->actual_length) < 0) {
802 bt_dev_err(hdev, "corrupted event packet");
803 hdev->stat.err_rx++;
804 }
805 } else if (urb->status == -ENOENT) {
806 /* Avoid suspend failed when usb_kill_urb */
807 return;
808 }
809
810 if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
811 return;
812
813 usb_mark_last_busy(data->udev);
814 usb_anchor_urb(urb, &data->intr_anchor);
815
816 err = usb_submit_urb(urb, GFP_ATOMIC);
817 if (err < 0) {
818 /* -EPERM: urb is being killed;
819 * -ENODEV: device got disconnected
820 */
821 if (err != -EPERM && err != -ENODEV)
822 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
823 urb, -err);
824 usb_unanchor_urb(urb);
825 }
826}
827
828static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
829{
830 struct btusb_data *data = hci_get_drvdata(hdev);
831 struct urb *urb;
832 unsigned char *buf;
833 unsigned int pipe;
834 int err, size;
835
836 BT_DBG("%s", hdev->name);
837
838 if (!data->intr_ep)
839 return -ENODEV;
840
841 urb = usb_alloc_urb(0, mem_flags);
842 if (!urb)
843 return -ENOMEM;
844
845 size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
846
847 buf = kmalloc(size, mem_flags);
848 if (!buf) {
849 usb_free_urb(urb);
850 return -ENOMEM;
851 }
852
853 pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress);
854
855 usb_fill_int_urb(urb, data->udev, pipe, buf, size,
856 btusb_intr_complete, hdev, data->intr_ep->bInterval);
857
858 urb->transfer_flags |= URB_FREE_BUFFER;
859
860 usb_anchor_urb(urb, &data->intr_anchor);
861
862 err = usb_submit_urb(urb, mem_flags);
863 if (err < 0) {
864 if (err != -EPERM && err != -ENODEV)
865 bt_dev_err(hdev, "urb %p submission failed (%d)",
866 urb, -err);
867 usb_unanchor_urb(urb);
868 }
869
870 usb_free_urb(urb);
871
872 return err;
873}
874
875static void btusb_bulk_complete(struct urb *urb)
876{
877 struct hci_dev *hdev = urb->context;
878 struct btusb_data *data = hci_get_drvdata(hdev);
879 int err;
880
881 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
882 urb->actual_length);
883
884 if (!test_bit(HCI_RUNNING, &hdev->flags))
885 return;
886
887 if (urb->status == 0) {
888 hdev->stat.byte_rx += urb->actual_length;
889
890 if (data->recv_bulk(data, urb->transfer_buffer,
891 urb->actual_length) < 0) {
892 bt_dev_err(hdev, "corrupted ACL packet");
893 hdev->stat.err_rx++;
894 }
895 } else if (urb->status == -ENOENT) {
896 /* Avoid suspend failed when usb_kill_urb */
897 return;
898 }
899
900 if (!test_bit(BTUSB_BULK_RUNNING, &data->flags))
901 return;
902
903 usb_anchor_urb(urb, &data->bulk_anchor);
904 usb_mark_last_busy(data->udev);
905
906 err = usb_submit_urb(urb, GFP_ATOMIC);
907 if (err < 0) {
908 /* -EPERM: urb is being killed;
909 * -ENODEV: device got disconnected
910 */
911 if (err != -EPERM && err != -ENODEV)
912 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
913 urb, -err);
914 usb_unanchor_urb(urb);
915 }
916}
917
918static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
919{
920 struct btusb_data *data = hci_get_drvdata(hdev);
921 struct urb *urb;
922 unsigned char *buf;
923 unsigned int pipe;
924 int err, size = HCI_MAX_FRAME_SIZE;
925
926 BT_DBG("%s", hdev->name);
927
928 if (!data->bulk_rx_ep)
929 return -ENODEV;
930
931 urb = usb_alloc_urb(0, mem_flags);
932 if (!urb)
933 return -ENOMEM;
934
935 buf = kmalloc(size, mem_flags);
936 if (!buf) {
937 usb_free_urb(urb);
938 return -ENOMEM;
939 }
940
941 pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress);
942
943 usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
944 btusb_bulk_complete, hdev);
945
946 urb->transfer_flags |= URB_FREE_BUFFER;
947
948 usb_mark_last_busy(data->udev);
949 usb_anchor_urb(urb, &data->bulk_anchor);
950
951 err = usb_submit_urb(urb, mem_flags);
952 if (err < 0) {
953 if (err != -EPERM && err != -ENODEV)
954 bt_dev_err(hdev, "urb %p submission failed (%d)",
955 urb, -err);
956 usb_unanchor_urb(urb);
957 }
958
959 usb_free_urb(urb);
960
961 return err;
962}
963
964static void btusb_isoc_complete(struct urb *urb)
965{
966 struct hci_dev *hdev = urb->context;
967 struct btusb_data *data = hci_get_drvdata(hdev);
968 int i, err;
969
970 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
971 urb->actual_length);
972
973 if (!test_bit(HCI_RUNNING, &hdev->flags))
974 return;
975
976 if (urb->status == 0) {
977 for (i = 0; i < urb->number_of_packets; i++) {
978 unsigned int offset = urb->iso_frame_desc[i].offset;
979 unsigned int length = urb->iso_frame_desc[i].actual_length;
980
981 if (urb->iso_frame_desc[i].status)
982 continue;
983
984 hdev->stat.byte_rx += length;
985
986 if (btusb_recv_isoc(data, urb->transfer_buffer + offset,
987 length) < 0) {
988 bt_dev_err(hdev, "corrupted SCO packet");
989 hdev->stat.err_rx++;
990 }
991 }
992 } else if (urb->status == -ENOENT) {
993 /* Avoid suspend failed when usb_kill_urb */
994 return;
995 }
996
997 if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
998 return;
999
1000 usb_anchor_urb(urb, &data->isoc_anchor);
1001
1002 err = usb_submit_urb(urb, GFP_ATOMIC);
1003 if (err < 0) {
1004 /* -EPERM: urb is being killed;
1005 * -ENODEV: device got disconnected
1006 */
1007 if (err != -EPERM && err != -ENODEV)
1008 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
1009 urb, -err);
1010 usb_unanchor_urb(urb);
1011 }
1012}
1013
1014static inline void __fill_isoc_descriptor_msbc(struct urb *urb, int len,
1015 int mtu, struct btusb_data *data)
1016{
1017 int i, offset = 0;
1018 unsigned int interval;
1019
1020 BT_DBG("len %d mtu %d", len, mtu);
1021
1022 /* For mSBC ALT 6 setting the host will send the packet at continuous
1023 * flow. As per core spec 5, vol 4, part B, table 2.1. For ALT setting
1024 * 6 the HCI PACKET INTERVAL should be 7.5ms for every usb packets.
1025 * To maintain the rate we send 63bytes of usb packets alternatively for
1026 * 7ms and 8ms to maintain the rate as 7.5ms.
1027 */
1028 if (data->usb_alt6_packet_flow) {
1029 interval = 7;
1030 data->usb_alt6_packet_flow = false;
1031 } else {
1032 interval = 6;
1033 data->usb_alt6_packet_flow = true;
1034 }
1035
1036 for (i = 0; i < interval; i++) {
1037 urb->iso_frame_desc[i].offset = offset;
1038 urb->iso_frame_desc[i].length = offset;
1039 }
1040
1041 if (len && i < BTUSB_MAX_ISOC_FRAMES) {
1042 urb->iso_frame_desc[i].offset = offset;
1043 urb->iso_frame_desc[i].length = len;
1044 i++;
1045 }
1046
1047 urb->number_of_packets = i;
1048}
1049
1050static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
1051{
1052 int i, offset = 0;
1053
1054 BT_DBG("len %d mtu %d", len, mtu);
1055
1056 for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
1057 i++, offset += mtu, len -= mtu) {
1058 urb->iso_frame_desc[i].offset = offset;
1059 urb->iso_frame_desc[i].length = mtu;
1060 }
1061
1062 if (len && i < BTUSB_MAX_ISOC_FRAMES) {
1063 urb->iso_frame_desc[i].offset = offset;
1064 urb->iso_frame_desc[i].length = len;
1065 i++;
1066 }
1067
1068 urb->number_of_packets = i;
1069}
1070
1071static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags)
1072{
1073 struct btusb_data *data = hci_get_drvdata(hdev);
1074 struct urb *urb;
1075 unsigned char *buf;
1076 unsigned int pipe;
1077 int err, size;
1078
1079 BT_DBG("%s", hdev->name);
1080
1081 if (!data->isoc_rx_ep)
1082 return -ENODEV;
1083
1084 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags);
1085 if (!urb)
1086 return -ENOMEM;
1087
1088 size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
1089 BTUSB_MAX_ISOC_FRAMES;
1090
1091 buf = kmalloc(size, mem_flags);
1092 if (!buf) {
1093 usb_free_urb(urb);
1094 return -ENOMEM;
1095 }
1096
1097 pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
1098
1099 usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete,
1100 hdev, data->isoc_rx_ep->bInterval);
1101
1102 urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;
1103
1104 __fill_isoc_descriptor(urb, size,
1105 le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
1106
1107 usb_anchor_urb(urb, &data->isoc_anchor);
1108
1109 err = usb_submit_urb(urb, mem_flags);
1110 if (err < 0) {
1111 if (err != -EPERM && err != -ENODEV)
1112 bt_dev_err(hdev, "urb %p submission failed (%d)",
1113 urb, -err);
1114 usb_unanchor_urb(urb);
1115 }
1116
1117 usb_free_urb(urb);
1118
1119 return err;
1120}
1121
1122static void btusb_diag_complete(struct urb *urb)
1123{
1124 struct hci_dev *hdev = urb->context;
1125 struct btusb_data *data = hci_get_drvdata(hdev);
1126 int err;
1127
1128 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1129 urb->actual_length);
1130
1131 if (urb->status == 0) {
1132 struct sk_buff *skb;
1133
1134 skb = bt_skb_alloc(urb->actual_length, GFP_ATOMIC);
1135 if (skb) {
1136 skb_put_data(skb, urb->transfer_buffer,
1137 urb->actual_length);
1138 hci_recv_diag(hdev, skb);
1139 }
1140 } else if (urb->status == -ENOENT) {
1141 /* Avoid suspend failed when usb_kill_urb */
1142 return;
1143 }
1144
1145 if (!test_bit(BTUSB_DIAG_RUNNING, &data->flags))
1146 return;
1147
1148 usb_anchor_urb(urb, &data->diag_anchor);
1149 usb_mark_last_busy(data->udev);
1150
1151 err = usb_submit_urb(urb, GFP_ATOMIC);
1152 if (err < 0) {
1153 /* -EPERM: urb is being killed;
1154 * -ENODEV: device got disconnected
1155 */
1156 if (err != -EPERM && err != -ENODEV)
1157 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
1158 urb, -err);
1159 usb_unanchor_urb(urb);
1160 }
1161}
1162
1163static int btusb_submit_diag_urb(struct hci_dev *hdev, gfp_t mem_flags)
1164{
1165 struct btusb_data *data = hci_get_drvdata(hdev);
1166 struct urb *urb;
1167 unsigned char *buf;
1168 unsigned int pipe;
1169 int err, size = HCI_MAX_FRAME_SIZE;
1170
1171 BT_DBG("%s", hdev->name);
1172
1173 if (!data->diag_rx_ep)
1174 return -ENODEV;
1175
1176 urb = usb_alloc_urb(0, mem_flags);
1177 if (!urb)
1178 return -ENOMEM;
1179
1180 buf = kmalloc(size, mem_flags);
1181 if (!buf) {
1182 usb_free_urb(urb);
1183 return -ENOMEM;
1184 }
1185
1186 pipe = usb_rcvbulkpipe(data->udev, data->diag_rx_ep->bEndpointAddress);
1187
1188 usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
1189 btusb_diag_complete, hdev);
1190
1191 urb->transfer_flags |= URB_FREE_BUFFER;
1192
1193 usb_mark_last_busy(data->udev);
1194 usb_anchor_urb(urb, &data->diag_anchor);
1195
1196 err = usb_submit_urb(urb, mem_flags);
1197 if (err < 0) {
1198 if (err != -EPERM && err != -ENODEV)
1199 bt_dev_err(hdev, "urb %p submission failed (%d)",
1200 urb, -err);
1201 usb_unanchor_urb(urb);
1202 }
1203
1204 usb_free_urb(urb);
1205
1206 return err;
1207}
1208
1209static void btusb_tx_complete(struct urb *urb)
1210{
1211 struct sk_buff *skb = urb->context;
1212 struct hci_dev *hdev = (struct hci_dev *)skb->dev;
1213 struct btusb_data *data = hci_get_drvdata(hdev);
1214 unsigned long flags;
1215
1216 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1217 urb->actual_length);
1218
1219 if (!test_bit(HCI_RUNNING, &hdev->flags))
1220 goto done;
1221
1222 if (!urb->status)
1223 hdev->stat.byte_tx += urb->transfer_buffer_length;
1224 else
1225 hdev->stat.err_tx++;
1226
1227done:
1228 spin_lock_irqsave(&data->txlock, flags);
1229 data->tx_in_flight--;
1230 spin_unlock_irqrestore(&data->txlock, flags);
1231
1232 kfree(urb->setup_packet);
1233
1234 kfree_skb(skb);
1235}
1236
1237static void btusb_isoc_tx_complete(struct urb *urb)
1238{
1239 struct sk_buff *skb = urb->context;
1240 struct hci_dev *hdev = (struct hci_dev *)skb->dev;
1241
1242 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1243 urb->actual_length);
1244
1245 if (!test_bit(HCI_RUNNING, &hdev->flags))
1246 goto done;
1247
1248 if (!urb->status)
1249 hdev->stat.byte_tx += urb->transfer_buffer_length;
1250 else
1251 hdev->stat.err_tx++;
1252
1253done:
1254 kfree(urb->setup_packet);
1255
1256 kfree_skb(skb);
1257}
1258
1259static int btusb_open(struct hci_dev *hdev)
1260{
1261 struct btusb_data *data = hci_get_drvdata(hdev);
1262 int err;
1263
1264 BT_DBG("%s", hdev->name);
1265
1266 err = usb_autopm_get_interface(data->intf);
1267 if (err < 0)
1268 return err;
1269
1270 /* Patching USB firmware files prior to starting any URBs of HCI path
1271 * It is more safe to use USB bulk channel for downloading USB patch
1272 */
1273 if (data->setup_on_usb) {
1274 err = data->setup_on_usb(hdev);
1275 if (err < 0)
1276 goto setup_fail;
1277 }
1278
1279 data->intf->needs_remote_wakeup = 1;
1280
1281 /* Disable device remote wakeup when host is suspended
1282 * For Realtek chips, global suspend without
1283 * SET_FEATURE (DEVICE_REMOTE_WAKEUP) can save more power in device.
1284 */
1285 if (test_bit(BTUSB_WAKEUP_DISABLE, &data->flags))
1286 device_wakeup_disable(&data->udev->dev);
1287
1288 if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
1289 goto done;
1290
1291 err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
1292 if (err < 0)
1293 goto failed;
1294
1295 err = btusb_submit_bulk_urb(hdev, GFP_KERNEL);
1296 if (err < 0) {
1297 usb_kill_anchored_urbs(&data->intr_anchor);
1298 goto failed;
1299 }
1300
1301 set_bit(BTUSB_BULK_RUNNING, &data->flags);
1302 btusb_submit_bulk_urb(hdev, GFP_KERNEL);
1303
1304 if (data->diag) {
1305 if (!btusb_submit_diag_urb(hdev, GFP_KERNEL))
1306 set_bit(BTUSB_DIAG_RUNNING, &data->flags);
1307 }
1308
1309done:
1310 usb_autopm_put_interface(data->intf);
1311 return 0;
1312
1313failed:
1314 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
1315setup_fail:
1316 usb_autopm_put_interface(data->intf);
1317 return err;
1318}
1319
1320static void btusb_stop_traffic(struct btusb_data *data)
1321{
1322 usb_kill_anchored_urbs(&data->intr_anchor);
1323 usb_kill_anchored_urbs(&data->bulk_anchor);
1324 usb_kill_anchored_urbs(&data->isoc_anchor);
1325 usb_kill_anchored_urbs(&data->diag_anchor);
1326 usb_kill_anchored_urbs(&data->ctrl_anchor);
1327}
1328
1329static int btusb_close(struct hci_dev *hdev)
1330{
1331 struct btusb_data *data = hci_get_drvdata(hdev);
1332 int err;
1333
1334 BT_DBG("%s", hdev->name);
1335
1336 cancel_work_sync(&data->work);
1337 cancel_work_sync(&data->waker);
1338
1339 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1340 clear_bit(BTUSB_BULK_RUNNING, &data->flags);
1341 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
1342 clear_bit(BTUSB_DIAG_RUNNING, &data->flags);
1343
1344 btusb_stop_traffic(data);
1345 btusb_free_frags(data);
1346
1347 err = usb_autopm_get_interface(data->intf);
1348 if (err < 0)
1349 goto failed;
1350
1351 data->intf->needs_remote_wakeup = 0;
1352
1353 /* Enable remote wake up for auto-suspend */
1354 if (test_bit(BTUSB_WAKEUP_DISABLE, &data->flags))
1355 data->intf->needs_remote_wakeup = 1;
1356
1357 usb_autopm_put_interface(data->intf);
1358
1359failed:
1360 usb_scuttle_anchored_urbs(&data->deferred);
1361 return 0;
1362}
1363
1364static int btusb_flush(struct hci_dev *hdev)
1365{
1366 struct btusb_data *data = hci_get_drvdata(hdev);
1367
1368 BT_DBG("%s", hdev->name);
1369
1370 usb_kill_anchored_urbs(&data->tx_anchor);
1371 btusb_free_frags(data);
1372
1373 return 0;
1374}
1375
1376static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb)
1377{
1378 struct btusb_data *data = hci_get_drvdata(hdev);
1379 struct usb_ctrlrequest *dr;
1380 struct urb *urb;
1381 unsigned int pipe;
1382
1383 urb = usb_alloc_urb(0, GFP_KERNEL);
1384 if (!urb)
1385 return ERR_PTR(-ENOMEM);
1386
1387 dr = kmalloc(sizeof(*dr), GFP_KERNEL);
1388 if (!dr) {
1389 usb_free_urb(urb);
1390 return ERR_PTR(-ENOMEM);
1391 }
1392
1393 dr->bRequestType = data->cmdreq_type;
1394 dr->bRequest = data->cmdreq;
1395 dr->wIndex = 0;
1396 dr->wValue = 0;
1397 dr->wLength = __cpu_to_le16(skb->len);
1398
1399 pipe = usb_sndctrlpipe(data->udev, 0x00);
1400
1401 usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
1402 skb->data, skb->len, btusb_tx_complete, skb);
1403
1404 skb->dev = (void *)hdev;
1405
1406 return urb;
1407}
1408
1409static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb)
1410{
1411 struct btusb_data *data = hci_get_drvdata(hdev);
1412 struct urb *urb;
1413 unsigned int pipe;
1414
1415 if (!data->bulk_tx_ep)
1416 return ERR_PTR(-ENODEV);
1417
1418 urb = usb_alloc_urb(0, GFP_KERNEL);
1419 if (!urb)
1420 return ERR_PTR(-ENOMEM);
1421
1422 pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
1423
1424 usb_fill_bulk_urb(urb, data->udev, pipe,
1425 skb->data, skb->len, btusb_tx_complete, skb);
1426
1427 skb->dev = (void *)hdev;
1428
1429 return urb;
1430}
1431
1432static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb)
1433{
1434 struct btusb_data *data = hci_get_drvdata(hdev);
1435 struct urb *urb;
1436 unsigned int pipe;
1437
1438 if (!data->isoc_tx_ep)
1439 return ERR_PTR(-ENODEV);
1440
1441 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
1442 if (!urb)
1443 return ERR_PTR(-ENOMEM);
1444
1445 pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress);
1446
1447 usb_fill_int_urb(urb, data->udev, pipe,
1448 skb->data, skb->len, btusb_isoc_tx_complete,
1449 skb, data->isoc_tx_ep->bInterval);
1450
1451 urb->transfer_flags = URB_ISO_ASAP;
1452
1453 if (data->isoc_altsetting == 6)
1454 __fill_isoc_descriptor_msbc(urb, skb->len,
1455 le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize),
1456 data);
1457 else
1458 __fill_isoc_descriptor(urb, skb->len,
1459 le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
1460 skb->dev = (void *)hdev;
1461
1462 return urb;
1463}
1464
1465static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb)
1466{
1467 struct btusb_data *data = hci_get_drvdata(hdev);
1468 int err;
1469
1470 usb_anchor_urb(urb, &data->tx_anchor);
1471
1472 err = usb_submit_urb(urb, GFP_KERNEL);
1473 if (err < 0) {
1474 if (err != -EPERM && err != -ENODEV)
1475 bt_dev_err(hdev, "urb %p submission failed (%d)",
1476 urb, -err);
1477 kfree(urb->setup_packet);
1478 usb_unanchor_urb(urb);
1479 } else {
1480 usb_mark_last_busy(data->udev);
1481 }
1482
1483 usb_free_urb(urb);
1484 return err;
1485}
1486
1487static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb)
1488{
1489 struct btusb_data *data = hci_get_drvdata(hdev);
1490 unsigned long flags;
1491 bool suspending;
1492
1493 spin_lock_irqsave(&data->txlock, flags);
1494 suspending = test_bit(BTUSB_SUSPENDING, &data->flags);
1495 if (!suspending)
1496 data->tx_in_flight++;
1497 spin_unlock_irqrestore(&data->txlock, flags);
1498
1499 if (!suspending)
1500 return submit_tx_urb(hdev, urb);
1501
1502 usb_anchor_urb(urb, &data->deferred);
1503 schedule_work(&data->waker);
1504
1505 usb_free_urb(urb);
1506 return 0;
1507}
1508
1509static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
1510{
1511 struct urb *urb;
1512
1513 BT_DBG("%s", hdev->name);
1514
1515 switch (hci_skb_pkt_type(skb)) {
1516 case HCI_COMMAND_PKT:
1517 urb = alloc_ctrl_urb(hdev, skb);
1518 if (IS_ERR(urb))
1519 return PTR_ERR(urb);
1520
1521 hdev->stat.cmd_tx++;
1522 return submit_or_queue_tx_urb(hdev, urb);
1523
1524 case HCI_ACLDATA_PKT:
1525 urb = alloc_bulk_urb(hdev, skb);
1526 if (IS_ERR(urb))
1527 return PTR_ERR(urb);
1528
1529 hdev->stat.acl_tx++;
1530 return submit_or_queue_tx_urb(hdev, urb);
1531
1532 case HCI_SCODATA_PKT:
1533 if (hci_conn_num(hdev, SCO_LINK) < 1)
1534 return -ENODEV;
1535
1536 urb = alloc_isoc_urb(hdev, skb);
1537 if (IS_ERR(urb))
1538 return PTR_ERR(urb);
1539
1540 hdev->stat.sco_tx++;
1541 return submit_tx_urb(hdev, urb);
1542 }
1543
1544 return -EILSEQ;
1545}
1546
1547static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
1548{
1549 struct btusb_data *data = hci_get_drvdata(hdev);
1550
1551 BT_DBG("%s evt %d", hdev->name, evt);
1552
1553 if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) {
1554 data->sco_num = hci_conn_num(hdev, SCO_LINK);
1555 data->air_mode = evt;
1556 schedule_work(&data->work);
1557 }
1558}
1559
1560static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
1561{
1562 struct btusb_data *data = hci_get_drvdata(hdev);
1563 struct usb_interface *intf = data->isoc;
1564 struct usb_endpoint_descriptor *ep_desc;
1565 int i, err;
1566
1567 if (!data->isoc)
1568 return -ENODEV;
1569
1570 err = usb_set_interface(data->udev, data->isoc_ifnum, altsetting);
1571 if (err < 0) {
1572 bt_dev_err(hdev, "setting interface failed (%d)", -err);
1573 return err;
1574 }
1575
1576 data->isoc_altsetting = altsetting;
1577
1578 data->isoc_tx_ep = NULL;
1579 data->isoc_rx_ep = NULL;
1580
1581 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
1582 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
1583
1584 if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
1585 data->isoc_tx_ep = ep_desc;
1586 continue;
1587 }
1588
1589 if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
1590 data->isoc_rx_ep = ep_desc;
1591 continue;
1592 }
1593 }
1594
1595 if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
1596 bt_dev_err(hdev, "invalid SCO descriptors");
1597 return -ENODEV;
1598 }
1599
1600 return 0;
1601}
1602
1603static int btusb_switch_alt_setting(struct hci_dev *hdev, int new_alts)
1604{
1605 struct btusb_data *data = hci_get_drvdata(hdev);
1606 int err;
1607
1608 if (data->isoc_altsetting != new_alts) {
1609 unsigned long flags;
1610
1611 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1612 usb_kill_anchored_urbs(&data->isoc_anchor);
1613
1614 /* When isochronous alternate setting needs to be
1615 * changed, because SCO connection has been added
1616 * or removed, a packet fragment may be left in the
1617 * reassembling state. This could lead to wrongly
1618 * assembled fragments.
1619 *
1620 * Clear outstanding fragment when selecting a new
1621 * alternate setting.
1622 */
1623 spin_lock_irqsave(&data->rxlock, flags);
1624 kfree_skb(data->sco_skb);
1625 data->sco_skb = NULL;
1626 spin_unlock_irqrestore(&data->rxlock, flags);
1627
1628 err = __set_isoc_interface(hdev, new_alts);
1629 if (err < 0)
1630 return err;
1631 }
1632
1633 if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
1634 if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
1635 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1636 else
1637 btusb_submit_isoc_urb(hdev, GFP_KERNEL);
1638 }
1639
1640 return 0;
1641}
1642
1643static struct usb_host_interface *btusb_find_altsetting(struct btusb_data *data,
1644 int alt)
1645{
1646 struct usb_interface *intf = data->isoc;
1647 int i;
1648
1649 BT_DBG("Looking for Alt no :%d", alt);
1650
1651 if (!intf)
1652 return NULL;
1653
1654 for (i = 0; i < intf->num_altsetting; i++) {
1655 if (intf->altsetting[i].desc.bAlternateSetting == alt)
1656 return &intf->altsetting[i];
1657 }
1658
1659 return NULL;
1660}
1661
1662static void btusb_work(struct work_struct *work)
1663{
1664 struct btusb_data *data = container_of(work, struct btusb_data, work);
1665 struct hci_dev *hdev = data->hdev;
1666 int new_alts = 0;
1667 int err;
1668
1669 if (data->sco_num > 0) {
1670 if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
1671 err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
1672 if (err < 0) {
1673 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1674 usb_kill_anchored_urbs(&data->isoc_anchor);
1675 return;
1676 }
1677
1678 set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
1679 }
1680
1681 if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_CVSD) {
1682 if (hdev->voice_setting & 0x0020) {
1683 static const int alts[3] = { 2, 4, 5 };
1684
1685 new_alts = alts[data->sco_num - 1];
1686 } else {
1687 new_alts = data->sco_num;
1688 }
1689 } else if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_TRANSP) {
1690 /* Check if Alt 6 is supported for Transparent audio */
1691 if (btusb_find_altsetting(data, 6)) {
1692 data->usb_alt6_packet_flow = true;
1693 new_alts = 6;
1694 } else if (test_bit(BTUSB_USE_ALT1_FOR_WBS, &data->flags)) {
1695 new_alts = 1;
1696 } else {
1697 bt_dev_err(hdev, "Device does not support ALT setting 6");
1698 }
1699 }
1700
1701 if (btusb_switch_alt_setting(hdev, new_alts) < 0)
1702 bt_dev_err(hdev, "set USB alt:(%d) failed!", new_alts);
1703 } else {
1704 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1705 usb_kill_anchored_urbs(&data->isoc_anchor);
1706
1707 __set_isoc_interface(hdev, 0);
1708 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
1709 usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
1710 }
1711}
1712
1713static void btusb_waker(struct work_struct *work)
1714{
1715 struct btusb_data *data = container_of(work, struct btusb_data, waker);
1716 int err;
1717
1718 err = usb_autopm_get_interface(data->intf);
1719 if (err < 0)
1720 return;
1721
1722 usb_autopm_put_interface(data->intf);
1723}
1724
1725static int btusb_setup_bcm92035(struct hci_dev *hdev)
1726{
1727 struct sk_buff *skb;
1728 u8 val = 0x00;
1729
1730 BT_DBG("%s", hdev->name);
1731
1732 skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
1733 if (IS_ERR(skb))
1734 bt_dev_err(hdev, "BCM92035 command failed (%ld)", PTR_ERR(skb));
1735 else
1736 kfree_skb(skb);
1737
1738 return 0;
1739}
1740
1741static int btusb_setup_csr(struct hci_dev *hdev)
1742{
1743 struct hci_rp_read_local_version *rp;
1744 struct sk_buff *skb;
1745 bool is_fake = false;
1746
1747 BT_DBG("%s", hdev->name);
1748
1749 skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
1750 HCI_INIT_TIMEOUT);
1751 if (IS_ERR(skb)) {
1752 int err = PTR_ERR(skb);
1753 bt_dev_err(hdev, "CSR: Local version failed (%d)", err);
1754 return err;
1755 }
1756
1757 if (skb->len != sizeof(struct hci_rp_read_local_version)) {
1758 bt_dev_err(hdev, "CSR: Local version length mismatch");
1759 kfree_skb(skb);
1760 return -EIO;
1761 }
1762
1763 rp = (struct hci_rp_read_local_version *)skb->data;
1764
1765 /* Detect a wide host of Chinese controllers that aren't CSR.
1766 *
1767 * Known fake bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891
1768 *
1769 * The main thing they have in common is that these are really popular low-cost
1770 * options that support newer Bluetooth versions but rely on heavy VID/PID
1771 * squatting of this poor old Bluetooth 1.1 device. Even sold as such.
1772 *
1773 * We detect actual CSR devices by checking that the HCI manufacturer code
1774 * is Cambridge Silicon Radio (10) and ensuring that LMP sub-version and
1775 * HCI rev values always match. As they both store the firmware number.
1776 */
1777 if (le16_to_cpu(rp->manufacturer) != 10 ||
1778 le16_to_cpu(rp->hci_rev) != le16_to_cpu(rp->lmp_subver))
1779 is_fake = true;
1780
1781 /* Known legit CSR firmware build numbers and their supported BT versions:
1782 * - 1.1 (0x1) -> 0x0073, 0x020d, 0x033c, 0x034e
1783 * - 1.2 (0x2) -> 0x04d9, 0x0529
1784 * - 2.0 (0x3) -> 0x07a6, 0x07ad, 0x0c5c
1785 * - 2.1 (0x4) -> 0x149c, 0x1735, 0x1899 (0x1899 is a BlueCore4-External)
1786 * - 4.0 (0x6) -> 0x1d86, 0x2031, 0x22bb
1787 *
1788 * e.g. Real CSR dongles with LMP subversion 0x73 are old enough that
1789 * support BT 1.1 only; so it's a dead giveaway when some
1790 * third-party BT 4.0 dongle reuses it.
1791 */
1792 else if (le16_to_cpu(rp->lmp_subver) <= 0x034e &&
1793 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_1_1)
1794 is_fake = true;
1795
1796 else if (le16_to_cpu(rp->lmp_subver) <= 0x0529 &&
1797 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_1_2)
1798 is_fake = true;
1799
1800 else if (le16_to_cpu(rp->lmp_subver) <= 0x0c5c &&
1801 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_2_0)
1802 is_fake = true;
1803
1804 else if (le16_to_cpu(rp->lmp_subver) <= 0x1899 &&
1805 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_2_1)
1806 is_fake = true;
1807
1808 else if (le16_to_cpu(rp->lmp_subver) <= 0x22bb &&
1809 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_4_0)
1810 is_fake = true;
1811
1812 if (is_fake) {
1813 bt_dev_warn(hdev, "CSR: Unbranded CSR clone detected; adding workarounds...");
1814
1815 /* Generally these clones have big discrepancies between
1816 * advertised features and what's actually supported.
1817 * Probably will need to be expanded in the future;
1818 * without these the controller will lock up.
1819 */
1820 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
1821 set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
1822
1823 /* Clear the reset quirk since this is not an actual
1824 * early Bluetooth 1.1 device from CSR.
1825 */
1826 clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
1827 clear_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
1828 }
1829
1830 kfree_skb(skb);
1831
1832 return 0;
1833}
1834
1835static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
1836 struct intel_version *ver)
1837{
1838 const struct firmware *fw;
1839 char fwname[64];
1840 int ret;
1841
1842 snprintf(fwname, sizeof(fwname),
1843 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1844 ver->hw_platform, ver->hw_variant, ver->hw_revision,
1845 ver->fw_variant, ver->fw_revision, ver->fw_build_num,
1846 ver->fw_build_ww, ver->fw_build_yy);
1847
1848 ret = request_firmware(&fw, fwname, &hdev->dev);
1849 if (ret < 0) {
1850 if (ret == -EINVAL) {
1851 bt_dev_err(hdev, "Intel firmware file request failed (%d)",
1852 ret);
1853 return NULL;
1854 }
1855
1856 bt_dev_err(hdev, "failed to open Intel firmware file: %s (%d)",
1857 fwname, ret);
1858
1859 /* If the correct firmware patch file is not found, use the
1860 * default firmware patch file instead
1861 */
1862 snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
1863 ver->hw_platform, ver->hw_variant);
1864 if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
1865 bt_dev_err(hdev, "failed to open default fw file: %s",
1866 fwname);
1867 return NULL;
1868 }
1869 }
1870
1871 bt_dev_info(hdev, "Intel Bluetooth firmware file: %s", fwname);
1872
1873 return fw;
1874}
1875
1876static int btusb_setup_intel_patching(struct hci_dev *hdev,
1877 const struct firmware *fw,
1878 const u8 **fw_ptr, int *disable_patch)
1879{
1880 struct sk_buff *skb;
1881 struct hci_command_hdr *cmd;
1882 const u8 *cmd_param;
1883 struct hci_event_hdr *evt = NULL;
1884 const u8 *evt_param = NULL;
1885 int remain = fw->size - (*fw_ptr - fw->data);
1886
1887 /* The first byte indicates the types of the patch command or event.
1888 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1889 * in the current firmware buffer doesn't start with 0x01 or
1890 * the size of remain buffer is smaller than HCI command header,
1891 * the firmware file is corrupted and it should stop the patching
1892 * process.
1893 */
1894 if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
1895 bt_dev_err(hdev, "Intel fw corrupted: invalid cmd read");
1896 return -EINVAL;
1897 }
1898 (*fw_ptr)++;
1899 remain--;
1900
1901 cmd = (struct hci_command_hdr *)(*fw_ptr);
1902 *fw_ptr += sizeof(*cmd);
1903 remain -= sizeof(*cmd);
1904
1905 /* Ensure that the remain firmware data is long enough than the length
1906 * of command parameter. If not, the firmware file is corrupted.
1907 */
1908 if (remain < cmd->plen) {
1909 bt_dev_err(hdev, "Intel fw corrupted: invalid cmd len");
1910 return -EFAULT;
1911 }
1912
1913 /* If there is a command that loads a patch in the firmware
1914 * file, then enable the patch upon success, otherwise just
1915 * disable the manufacturer mode, for example patch activation
1916 * is not required when the default firmware patch file is used
1917 * because there are no patch data to load.
1918 */
1919 if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
1920 *disable_patch = 0;
1921
1922 cmd_param = *fw_ptr;
1923 *fw_ptr += cmd->plen;
1924 remain -= cmd->plen;
1925
1926 /* This reads the expected events when the above command is sent to the
1927 * device. Some vendor commands expects more than one events, for
1928 * example command status event followed by vendor specific event.
1929 * For this case, it only keeps the last expected event. so the command
1930 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1931 * last expected event.
1932 */
1933 while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
1934 (*fw_ptr)++;
1935 remain--;
1936
1937 evt = (struct hci_event_hdr *)(*fw_ptr);
1938 *fw_ptr += sizeof(*evt);
1939 remain -= sizeof(*evt);
1940
1941 if (remain < evt->plen) {
1942 bt_dev_err(hdev, "Intel fw corrupted: invalid evt len");
1943 return -EFAULT;
1944 }
1945
1946 evt_param = *fw_ptr;
1947 *fw_ptr += evt->plen;
1948 remain -= evt->plen;
1949 }
1950
1951 /* Every HCI commands in the firmware file has its correspond event.
1952 * If event is not found or remain is smaller than zero, the firmware
1953 * file is corrupted.
1954 */
1955 if (!evt || !evt_param || remain < 0) {
1956 bt_dev_err(hdev, "Intel fw corrupted: invalid evt read");
1957 return -EFAULT;
1958 }
1959
1960 skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
1961 cmd_param, evt->evt, HCI_INIT_TIMEOUT);
1962 if (IS_ERR(skb)) {
1963 bt_dev_err(hdev, "sending Intel patch command (0x%4.4x) failed (%ld)",
1964 cmd->opcode, PTR_ERR(skb));
1965 return PTR_ERR(skb);
1966 }
1967
1968 /* It ensures that the returned event matches the event data read from
1969 * the firmware file. At fist, it checks the length and then
1970 * the contents of the event.
1971 */
1972 if (skb->len != evt->plen) {
1973 bt_dev_err(hdev, "mismatch event length (opcode 0x%4.4x)",
1974 le16_to_cpu(cmd->opcode));
1975 kfree_skb(skb);
1976 return -EFAULT;
1977 }
1978
1979 if (memcmp(skb->data, evt_param, evt->plen)) {
1980 bt_dev_err(hdev, "mismatch event parameter (opcode 0x%4.4x)",
1981 le16_to_cpu(cmd->opcode));
1982 kfree_skb(skb);
1983 return -EFAULT;
1984 }
1985 kfree_skb(skb);
1986
1987 return 0;
1988}
1989
1990static int btusb_setup_intel(struct hci_dev *hdev)
1991{
1992 struct sk_buff *skb;
1993 const struct firmware *fw;
1994 const u8 *fw_ptr;
1995 int disable_patch, err;
1996 struct intel_version ver;
1997
1998 BT_DBG("%s", hdev->name);
1999
2000 /* The controller has a bug with the first HCI command sent to it
2001 * returning number of completed commands as zero. This would stall the
2002 * command processing in the Bluetooth core.
2003 *
2004 * As a workaround, send HCI Reset command first which will reset the
2005 * number of completed commands and allow normal command processing
2006 * from now on.
2007 */
2008 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
2009 if (IS_ERR(skb)) {
2010 bt_dev_err(hdev, "sending initial HCI reset command failed (%ld)",
2011 PTR_ERR(skb));
2012 return PTR_ERR(skb);
2013 }
2014 kfree_skb(skb);
2015
2016 /* Read Intel specific controller version first to allow selection of
2017 * which firmware file to load.
2018 *
2019 * The returned information are hardware variant and revision plus
2020 * firmware variant, revision and build number.
2021 */
2022 err = btintel_read_version(hdev, &ver);
2023 if (err)
2024 return err;
2025
2026 bt_dev_info(hdev, "read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
2027 ver.hw_platform, ver.hw_variant, ver.hw_revision,
2028 ver.fw_variant, ver.fw_revision, ver.fw_build_num,
2029 ver.fw_build_ww, ver.fw_build_yy, ver.fw_patch_num);
2030
2031 /* fw_patch_num indicates the version of patch the device currently
2032 * have. If there is no patch data in the device, it is always 0x00.
2033 * So, if it is other than 0x00, no need to patch the device again.
2034 */
2035 if (ver.fw_patch_num) {
2036 bt_dev_info(hdev, "Intel device is already patched. "
2037 "patch num: %02x", ver.fw_patch_num);
2038 goto complete;
2039 }
2040
2041 /* Opens the firmware patch file based on the firmware version read
2042 * from the controller. If it fails to open the matching firmware
2043 * patch file, it tries to open the default firmware patch file.
2044 * If no patch file is found, allow the device to operate without
2045 * a patch.
2046 */
2047 fw = btusb_setup_intel_get_fw(hdev, &ver);
2048 if (!fw)
2049 goto complete;
2050 fw_ptr = fw->data;
2051
2052 /* Enable the manufacturer mode of the controller.
2053 * Only while this mode is enabled, the driver can download the
2054 * firmware patch data and configuration parameters.
2055 */
2056 err = btintel_enter_mfg(hdev);
2057 if (err) {
2058 release_firmware(fw);
2059 return err;
2060 }
2061
2062 disable_patch = 1;
2063
2064 /* The firmware data file consists of list of Intel specific HCI
2065 * commands and its expected events. The first byte indicates the
2066 * type of the message, either HCI command or HCI event.
2067 *
2068 * It reads the command and its expected event from the firmware file,
2069 * and send to the controller. Once __hci_cmd_sync_ev() returns,
2070 * the returned event is compared with the event read from the firmware
2071 * file and it will continue until all the messages are downloaded to
2072 * the controller.
2073 *
2074 * Once the firmware patching is completed successfully,
2075 * the manufacturer mode is disabled with reset and activating the
2076 * downloaded patch.
2077 *
2078 * If the firmware patching fails, the manufacturer mode is
2079 * disabled with reset and deactivating the patch.
2080 *
2081 * If the default patch file is used, no reset is done when disabling
2082 * the manufacturer.
2083 */
2084 while (fw->size > fw_ptr - fw->data) {
2085 int ret;
2086
2087 ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr,
2088 &disable_patch);
2089 if (ret < 0)
2090 goto exit_mfg_deactivate;
2091 }
2092
2093 release_firmware(fw);
2094
2095 if (disable_patch)
2096 goto exit_mfg_disable;
2097
2098 /* Patching completed successfully and disable the manufacturer mode
2099 * with reset and activate the downloaded firmware patches.
2100 */
2101 err = btintel_exit_mfg(hdev, true, true);
2102 if (err)
2103 return err;
2104
2105 /* Need build number for downloaded fw patches in
2106 * every power-on boot
2107 */
2108 err = btintel_read_version(hdev, &ver);
2109 if (err)
2110 return err;
2111 bt_dev_info(hdev, "Intel BT fw patch 0x%02x completed & activated",
2112 ver.fw_patch_num);
2113
2114 goto complete;
2115
2116exit_mfg_disable:
2117 /* Disable the manufacturer mode without reset */
2118 err = btintel_exit_mfg(hdev, false, false);
2119 if (err)
2120 return err;
2121
2122 bt_dev_info(hdev, "Intel firmware patch completed");
2123
2124 goto complete;
2125
2126exit_mfg_deactivate:
2127 release_firmware(fw);
2128
2129 /* Patching failed. Disable the manufacturer mode with reset and
2130 * deactivate the downloaded firmware patches.
2131 */
2132 err = btintel_exit_mfg(hdev, true, false);
2133 if (err)
2134 return err;
2135
2136 bt_dev_info(hdev, "Intel firmware patch completed and deactivated");
2137
2138complete:
2139 /* Set the event mask for Intel specific vendor events. This enables
2140 * a few extra events that are useful during general operation.
2141 */
2142 btintel_set_event_mask_mfg(hdev, false);
2143
2144 btintel_check_bdaddr(hdev);
2145 return 0;
2146}
2147
2148static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
2149{
2150 struct sk_buff *skb;
2151 struct hci_event_hdr *hdr;
2152 struct hci_ev_cmd_complete *evt;
2153
2154 skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL);
2155 if (!skb)
2156 return -ENOMEM;
2157
2158 hdr = skb_put(skb, sizeof(*hdr));
2159 hdr->evt = HCI_EV_CMD_COMPLETE;
2160 hdr->plen = sizeof(*evt) + 1;
2161
2162 evt = skb_put(skb, sizeof(*evt));
2163 evt->ncmd = 0x01;
2164 evt->opcode = cpu_to_le16(opcode);
2165
2166 skb_put_u8(skb, 0x00);
2167
2168 hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
2169
2170 return hci_recv_frame(hdev, skb);
2171}
2172
2173static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
2174 int count)
2175{
2176 /* When the device is in bootloader mode, then it can send
2177 * events via the bulk endpoint. These events are treated the
2178 * same way as the ones received from the interrupt endpoint.
2179 */
2180 if (test_bit(BTUSB_BOOTLOADER, &data->flags))
2181 return btusb_recv_intr(data, buffer, count);
2182
2183 return btusb_recv_bulk(data, buffer, count);
2184}
2185
2186static void btusb_intel_bootup(struct btusb_data *data, const void *ptr,
2187 unsigned int len)
2188{
2189 const struct intel_bootup *evt = ptr;
2190
2191 if (len != sizeof(*evt))
2192 return;
2193
2194 if (test_and_clear_bit(BTUSB_BOOTING, &data->flags))
2195 wake_up_bit(&data->flags, BTUSB_BOOTING);
2196}
2197
2198static void btusb_intel_secure_send_result(struct btusb_data *data,
2199 const void *ptr, unsigned int len)
2200{
2201 const struct intel_secure_send_result *evt = ptr;
2202
2203 if (len != sizeof(*evt))
2204 return;
2205
2206 if (evt->result)
2207 set_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
2208
2209 if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) &&
2210 test_bit(BTUSB_FIRMWARE_LOADED, &data->flags))
2211 wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
2212}
2213
2214static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
2215{
2216 struct btusb_data *data = hci_get_drvdata(hdev);
2217
2218 if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
2219 struct hci_event_hdr *hdr = (void *)skb->data;
2220
2221 if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
2222 hdr->plen > 0) {
2223 const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
2224 unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;
2225
2226 switch (skb->data[2]) {
2227 case 0x02:
2228 /* When switching to the operational firmware
2229 * the device sends a vendor specific event
2230 * indicating that the bootup completed.
2231 */
2232 btusb_intel_bootup(data, ptr, len);
2233 break;
2234 case 0x06:
2235 /* When the firmware loading completes the
2236 * device sends out a vendor specific event
2237 * indicating the result of the firmware
2238 * loading.
2239 */
2240 btusb_intel_secure_send_result(data, ptr, len);
2241 break;
2242 }
2243 }
2244 }
2245
2246 return hci_recv_frame(hdev, skb);
2247}
2248
2249static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
2250{
2251 struct btusb_data *data = hci_get_drvdata(hdev);
2252 struct urb *urb;
2253
2254 BT_DBG("%s", hdev->name);
2255
2256 switch (hci_skb_pkt_type(skb)) {
2257 case HCI_COMMAND_PKT:
2258 if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
2259 struct hci_command_hdr *cmd = (void *)skb->data;
2260 __u16 opcode = le16_to_cpu(cmd->opcode);
2261
2262 /* When in bootloader mode and the command 0xfc09
2263 * is received, it needs to be send down the
2264 * bulk endpoint. So allocate a bulk URB instead.
2265 */
2266 if (opcode == 0xfc09)
2267 urb = alloc_bulk_urb(hdev, skb);
2268 else
2269 urb = alloc_ctrl_urb(hdev, skb);
2270
2271 /* When the 0xfc01 command is issued to boot into
2272 * the operational firmware, it will actually not
2273 * send a command complete event. To keep the flow
2274 * control working inject that event here.
2275 */
2276 if (opcode == 0xfc01)
2277 inject_cmd_complete(hdev, opcode);
2278 } else {
2279 urb = alloc_ctrl_urb(hdev, skb);
2280 }
2281 if (IS_ERR(urb))
2282 return PTR_ERR(urb);
2283
2284 hdev->stat.cmd_tx++;
2285 return submit_or_queue_tx_urb(hdev, urb);
2286
2287 case HCI_ACLDATA_PKT:
2288 urb = alloc_bulk_urb(hdev, skb);
2289 if (IS_ERR(urb))
2290 return PTR_ERR(urb);
2291
2292 hdev->stat.acl_tx++;
2293 return submit_or_queue_tx_urb(hdev, urb);
2294
2295 case HCI_SCODATA_PKT:
2296 if (hci_conn_num(hdev, SCO_LINK) < 1)
2297 return -ENODEV;
2298
2299 urb = alloc_isoc_urb(hdev, skb);
2300 if (IS_ERR(urb))
2301 return PTR_ERR(urb);
2302
2303 hdev->stat.sco_tx++;
2304 return submit_tx_urb(hdev, urb);
2305 }
2306
2307 return -EILSEQ;
2308}
2309
2310static bool btusb_setup_intel_new_get_fw_name(struct intel_version *ver,
2311 struct intel_boot_params *params,
2312 char *fw_name, size_t len,
2313 const char *suffix)
2314{
2315 switch (ver->hw_variant) {
2316 case 0x0b: /* SfP */
2317 case 0x0c: /* WsP */
2318 snprintf(fw_name, len, "intel/ibt-%u-%u.%s",
2319 le16_to_cpu(ver->hw_variant),
2320 le16_to_cpu(params->dev_revid),
2321 suffix);
2322 break;
2323 case 0x11: /* JfP */
2324 case 0x12: /* ThP */
2325 case 0x13: /* HrP */
2326 case 0x14: /* CcP */
2327 snprintf(fw_name, len, "intel/ibt-%u-%u-%u.%s",
2328 le16_to_cpu(ver->hw_variant),
2329 le16_to_cpu(ver->hw_revision),
2330 le16_to_cpu(ver->fw_revision),
2331 suffix);
2332 break;
2333 default:
2334 return false;
2335 }
2336 return true;
2337}
2338
2339static int btusb_intel_download_firmware(struct hci_dev *hdev,
2340 struct intel_version *ver,
2341 struct intel_boot_params *params)
2342{
2343 const struct firmware *fw;
2344 u32 boot_param;
2345 char fwname[64];
2346 int err;
2347 struct btusb_data *data = hci_get_drvdata(hdev);
2348
2349 if (!ver || !params)
2350 return -EINVAL;
2351
2352 /* The hardware platform number has a fixed value of 0x37 and
2353 * for now only accept this single value.
2354 */
2355 if (ver->hw_platform != 0x37) {
2356 bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
2357 ver->hw_platform);
2358 return -EINVAL;
2359 }
2360
2361 /* Check for supported iBT hardware variants of this firmware
2362 * loading method.
2363 *
2364 * This check has been put in place to ensure correct forward
2365 * compatibility options when newer hardware variants come along.
2366 */
2367 switch (ver->hw_variant) {
2368 case 0x0b: /* SfP */
2369 case 0x0c: /* WsP */
2370 case 0x11: /* JfP */
2371 case 0x12: /* ThP */
2372 case 0x13: /* HrP */
2373 case 0x14: /* CcP */
2374 break;
2375 default:
2376 bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
2377 ver->hw_variant);
2378 return -EINVAL;
2379 }
2380
2381 btintel_version_info(hdev, ver);
2382
2383 /* The firmware variant determines if the device is in bootloader
2384 * mode or is running operational firmware. The value 0x06 identifies
2385 * the bootloader and the value 0x23 identifies the operational
2386 * firmware.
2387 *
2388 * When the operational firmware is already present, then only
2389 * the check for valid Bluetooth device address is needed. This
2390 * determines if the device will be added as configured or
2391 * unconfigured controller.
2392 *
2393 * It is not possible to use the Secure Boot Parameters in this
2394 * case since that command is only available in bootloader mode.
2395 */
2396 if (ver->fw_variant == 0x23) {
2397 clear_bit(BTUSB_BOOTLOADER, &data->flags);
2398 btintel_check_bdaddr(hdev);
2399 return 0;
2400 }
2401
2402 /* If the device is not in bootloader mode, then the only possible
2403 * choice is to return an error and abort the device initialization.
2404 */
2405 if (ver->fw_variant != 0x06) {
2406 bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
2407 ver->fw_variant);
2408 return -ENODEV;
2409 }
2410
2411 /* Read the secure boot parameters to identify the operating
2412 * details of the bootloader.
2413 */
2414 err = btintel_read_boot_params(hdev, params);
2415 if (err)
2416 return err;
2417
2418 /* It is required that every single firmware fragment is acknowledged
2419 * with a command complete event. If the boot parameters indicate
2420 * that this bootloader does not send them, then abort the setup.
2421 */
2422 if (params->limited_cce != 0x00) {
2423 bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
2424 params->limited_cce);
2425 return -EINVAL;
2426 }
2427
2428 /* If the OTP has no valid Bluetooth device address, then there will
2429 * also be no valid address for the operational firmware.
2430 */
2431 if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) {
2432 bt_dev_info(hdev, "No device address configured");
2433 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
2434 }
2435
2436 /* With this Intel bootloader only the hardware variant and device
2437 * revision information are used to select the right firmware for SfP
2438 * and WsP.
2439 *
2440 * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
2441 *
2442 * Currently the supported hardware variants are:
2443 * 11 (0x0b) for iBT3.0 (LnP/SfP)
2444 * 12 (0x0c) for iBT3.5 (WsP)
2445 *
2446 * For ThP/JfP and for future SKU's, the FW name varies based on HW
2447 * variant, HW revision and FW revision, as these are dependent on CNVi
2448 * and RF Combination.
2449 *
2450 * 17 (0x11) for iBT3.5 (JfP)
2451 * 18 (0x12) for iBT3.5 (ThP)
2452 *
2453 * The firmware file name for these will be
2454 * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi.
2455 *
2456 */
2457 err = btusb_setup_intel_new_get_fw_name(ver, params, fwname,
2458 sizeof(fwname), "sfi");
2459 if (!err) {
2460 bt_dev_err(hdev, "Unsupported Intel firmware naming");
2461 return -EINVAL;
2462 }
2463
2464 err = request_firmware(&fw, fwname, &hdev->dev);
2465 if (err < 0) {
2466 bt_dev_err(hdev, "Failed to load Intel firmware file (%d)", err);
2467 return err;
2468 }
2469
2470 bt_dev_info(hdev, "Found device firmware: %s", fwname);
2471
2472 if (fw->size < 644) {
2473 bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
2474 fw->size);
2475 err = -EBADF;
2476 goto done;
2477 }
2478
2479 set_bit(BTUSB_DOWNLOADING, &data->flags);
2480
2481 /* Start firmware downloading and get boot parameter */
2482 err = btintel_download_firmware(hdev, fw, &boot_param);
2483 if (err < 0) {
2484 /* When FW download fails, send Intel Reset to retry
2485 * FW download.
2486 */
2487 btintel_reset_to_bootloader(hdev);
2488 goto done;
2489 }
2490 set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
2491
2492 bt_dev_info(hdev, "Waiting for firmware download to complete");
2493
2494 /* Before switching the device into operational mode and with that
2495 * booting the loaded firmware, wait for the bootloader notification
2496 * that all fragments have been successfully received.
2497 *
2498 * When the event processing receives the notification, then the
2499 * BTUSB_DOWNLOADING flag will be cleared.
2500 *
2501 * The firmware loading should not take longer than 5 seconds
2502 * and thus just timeout if that happens and fail the setup
2503 * of this device.
2504 */
2505 err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
2506 TASK_INTERRUPTIBLE,
2507 msecs_to_jiffies(5000));
2508 if (err == -EINTR) {
2509 bt_dev_err(hdev, "Firmware loading interrupted");
2510 goto done;
2511 }
2512
2513 if (err) {
2514 bt_dev_err(hdev, "Firmware loading timeout");
2515 err = -ETIMEDOUT;
2516 btintel_reset_to_bootloader(hdev);
2517 goto done;
2518 }
2519
2520 if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
2521 bt_dev_err(hdev, "Firmware loading failed");
2522 err = -ENOEXEC;
2523 goto done;
2524 }
2525
2526done:
2527 release_firmware(fw);
2528 return err;
2529}
2530
2531static int btusb_setup_intel_new(struct hci_dev *hdev)
2532{
2533 struct btusb_data *data = hci_get_drvdata(hdev);
2534 struct intel_version ver;
2535 struct intel_boot_params params;
2536 u32 boot_param;
2537 char ddcname[64];
2538 ktime_t calltime, delta, rettime;
2539 unsigned long long duration;
2540 int err;
2541 struct intel_debug_features features;
2542
2543 BT_DBG("%s", hdev->name);
2544
2545 /* Set the default boot parameter to 0x0 and it is updated to
2546 * SKU specific boot parameter after reading Intel_Write_Boot_Params
2547 * command while downloading the firmware.
2548 */
2549 boot_param = 0x00000000;
2550
2551 calltime = ktime_get();
2552
2553 /* Read the Intel version information to determine if the device
2554 * is in bootloader mode or if it already has operational firmware
2555 * loaded.
2556 */
2557 err = btintel_read_version(hdev, &ver);
2558 if (err) {
2559 bt_dev_err(hdev, "Intel Read version failed (%d)", err);
2560 btintel_reset_to_bootloader(hdev);
2561 return err;
2562 }
2563
2564 err = btusb_intel_download_firmware(hdev, &ver, ¶ms);
2565 if (err)
2566 return err;
2567
2568 /* controller is already having an operational firmware */
2569 if (ver.fw_variant == 0x23)
2570 goto finish;
2571
2572 rettime = ktime_get();
2573 delta = ktime_sub(rettime, calltime);
2574 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
2575
2576 bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
2577
2578 calltime = ktime_get();
2579
2580 set_bit(BTUSB_BOOTING, &data->flags);
2581
2582 err = btintel_send_intel_reset(hdev, boot_param);
2583 if (err) {
2584 bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
2585 btintel_reset_to_bootloader(hdev);
2586 return err;
2587 }
2588
2589 /* The bootloader will not indicate when the device is ready. This
2590 * is done by the operational firmware sending bootup notification.
2591 *
2592 * Booting into operational firmware should not take longer than
2593 * 1 second. However if that happens, then just fail the setup
2594 * since something went wrong.
2595 */
2596 bt_dev_info(hdev, "Waiting for device to boot");
2597
2598 err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
2599 TASK_INTERRUPTIBLE,
2600 msecs_to_jiffies(1000));
2601
2602 if (err == -EINTR) {
2603 bt_dev_err(hdev, "Device boot interrupted");
2604 return -EINTR;
2605 }
2606
2607 if (err) {
2608 bt_dev_err(hdev, "Device boot timeout");
2609 btintel_reset_to_bootloader(hdev);
2610 return -ETIMEDOUT;
2611 }
2612
2613 rettime = ktime_get();
2614 delta = ktime_sub(rettime, calltime);
2615 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
2616
2617 bt_dev_info(hdev, "Device booted in %llu usecs", duration);
2618
2619 clear_bit(BTUSB_BOOTLOADER, &data->flags);
2620
2621 err = btusb_setup_intel_new_get_fw_name(&ver, ¶ms, ddcname,
2622 sizeof(ddcname), "ddc");
2623
2624 if (!err) {
2625 bt_dev_err(hdev, "Unsupported Intel firmware naming");
2626 } else {
2627 /* Once the device is running in operational mode, it needs to
2628 * apply the device configuration (DDC) parameters.
2629 *
2630 * The device can work without DDC parameters, so even if it
2631 * fails to load the file, no need to fail the setup.
2632 */
2633 btintel_load_ddc_config(hdev, ddcname);
2634 }
2635
2636 /* Read the Intel supported features and if new exception formats
2637 * supported, need to load the additional DDC config to enable.
2638 */
2639 btintel_read_debug_features(hdev, &features);
2640
2641 /* Set DDC mask for available debug features */
2642 btintel_set_debug_features(hdev, &features);
2643
2644 /* Read the Intel version information after loading the FW */
2645 err = btintel_read_version(hdev, &ver);
2646 if (err)
2647 return err;
2648
2649 btintel_version_info(hdev, &ver);
2650
2651finish:
2652 /* All Intel controllers that support the Microsoft vendor
2653 * extension are using 0xFC1E for VsMsftOpCode.
2654 */
2655 switch (ver.hw_variant) {
2656 case 0x12: /* ThP */
2657 hci_set_msft_opcode(hdev, 0xFC1E);
2658 break;
2659 }
2660
2661 /* Set the event mask for Intel specific vendor events. This enables
2662 * a few extra events that are useful during general operation. It
2663 * does not enable any debugging related events.
2664 *
2665 * The device will function correctly without these events enabled
2666 * and thus no need to fail the setup.
2667 */
2668 btintel_set_event_mask(hdev, false);
2669
2670 return 0;
2671}
2672
2673static int btusb_shutdown_intel(struct hci_dev *hdev)
2674{
2675 struct sk_buff *skb;
2676 long ret;
2677
2678 /* In the shutdown sequence where Bluetooth is turned off followed
2679 * by WiFi being turned off, turning WiFi back on causes issue with
2680 * the RF calibration.
2681 *
2682 * To ensure that any RF activity has been stopped, issue HCI Reset
2683 * command to clear all ongoing activity including advertising,
2684 * scanning etc.
2685 */
2686 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
2687 if (IS_ERR(skb)) {
2688 ret = PTR_ERR(skb);
2689 bt_dev_err(hdev, "HCI reset during shutdown failed");
2690 return ret;
2691 }
2692 kfree_skb(skb);
2693
2694 /* Some platforms have an issue with BT LED when the interface is
2695 * down or BT radio is turned off, which takes 5 seconds to BT LED
2696 * goes off. This command turns off the BT LED immediately.
2697 */
2698 skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
2699 if (IS_ERR(skb)) {
2700 ret = PTR_ERR(skb);
2701 bt_dev_err(hdev, "turning off Intel device LED failed");
2702 return ret;
2703 }
2704 kfree_skb(skb);
2705
2706 return 0;
2707}
2708
2709static int btusb_shutdown_intel_new(struct hci_dev *hdev)
2710{
2711 struct sk_buff *skb;
2712
2713 /* Send HCI Reset to the controller to stop any BT activity which
2714 * were triggered. This will help to save power and maintain the
2715 * sync b/w Host and controller
2716 */
2717 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
2718 if (IS_ERR(skb)) {
2719 bt_dev_err(hdev, "HCI reset during shutdown failed");
2720 return PTR_ERR(skb);
2721 }
2722 kfree_skb(skb);
2723
2724 return 0;
2725}
2726
2727#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"
2728#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
2729
2730#define HCI_WMT_MAX_EVENT_SIZE 64
2731
2732enum {
2733 BTMTK_WMT_PATCH_DWNLD = 0x1,
2734 BTMTK_WMT_FUNC_CTRL = 0x6,
2735 BTMTK_WMT_RST = 0x7,
2736 BTMTK_WMT_SEMAPHORE = 0x17,
2737};
2738
2739enum {
2740 BTMTK_WMT_INVALID,
2741 BTMTK_WMT_PATCH_UNDONE,
2742 BTMTK_WMT_PATCH_DONE,
2743 BTMTK_WMT_ON_UNDONE,
2744 BTMTK_WMT_ON_DONE,
2745 BTMTK_WMT_ON_PROGRESS,
2746};
2747
2748struct btmtk_wmt_hdr {
2749 u8 dir;
2750 u8 op;
2751 __le16 dlen;
2752 u8 flag;
2753} __packed;
2754
2755struct btmtk_hci_wmt_cmd {
2756 struct btmtk_wmt_hdr hdr;
2757 u8 data[256];
2758} __packed;
2759
2760struct btmtk_hci_wmt_evt {
2761 struct hci_event_hdr hhdr;
2762 struct btmtk_wmt_hdr whdr;
2763} __packed;
2764
2765struct btmtk_hci_wmt_evt_funcc {
2766 struct btmtk_hci_wmt_evt hwhdr;
2767 __be16 status;
2768} __packed;
2769
2770struct btmtk_tci_sleep {
2771 u8 mode;
2772 __le16 duration;
2773 __le16 host_duration;
2774 u8 host_wakeup_pin;
2775 u8 time_compensation;
2776} __packed;
2777
2778struct btmtk_hci_wmt_params {
2779 u8 op;
2780 u8 flag;
2781 u16 dlen;
2782 const void *data;
2783 u32 *status;
2784};
2785
2786static void btusb_mtk_wmt_recv(struct urb *urb)
2787{
2788 struct hci_dev *hdev = urb->context;
2789 struct btusb_data *data = hci_get_drvdata(hdev);
2790 struct hci_event_hdr *hdr;
2791 struct sk_buff *skb;
2792 int err;
2793
2794 if (urb->status == 0 && urb->actual_length > 0) {
2795 hdev->stat.byte_rx += urb->actual_length;
2796
2797 /* WMT event shouldn't be fragmented and the size should be
2798 * less than HCI_WMT_MAX_EVENT_SIZE.
2799 */
2800 skb = bt_skb_alloc(HCI_WMT_MAX_EVENT_SIZE, GFP_ATOMIC);
2801 if (!skb) {
2802 hdev->stat.err_rx++;
2803 goto err_out;
2804 }
2805
2806 hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
2807 skb_put_data(skb, urb->transfer_buffer, urb->actual_length);
2808
2809 hdr = (void *)skb->data;
2810 /* Fix up the vendor event id with 0xff for vendor specific
2811 * instead of 0xe4 so that event send via monitoring socket can
2812 * be parsed properly.
2813 */
2814 hdr->evt = 0xff;
2815
2816 /* When someone waits for the WMT event, the skb is being cloned
2817 * and being processed the events from there then.
2818 */
2819 if (test_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags)) {
2820 data->evt_skb = skb_clone(skb, GFP_ATOMIC);
2821 if (!data->evt_skb)
2822 goto err_out;
2823 }
2824
2825 err = hci_recv_frame(hdev, skb);
2826 if (err < 0)
2827 goto err_free_skb;
2828
2829 if (test_and_clear_bit(BTUSB_TX_WAIT_VND_EVT,
2830 &data->flags)) {
2831 /* Barrier to sync with other CPUs */
2832 smp_mb__after_atomic();
2833 wake_up_bit(&data->flags,
2834 BTUSB_TX_WAIT_VND_EVT);
2835 }
2836err_out:
2837 return;
2838err_free_skb:
2839 kfree_skb(data->evt_skb);
2840 data->evt_skb = NULL;
2841 return;
2842 } else if (urb->status == -ENOENT) {
2843 /* Avoid suspend failed when usb_kill_urb */
2844 return;
2845 }
2846
2847 usb_mark_last_busy(data->udev);
2848
2849 /* The URB complete handler is still called with urb->actual_length = 0
2850 * when the event is not available, so we should keep re-submitting
2851 * URB until WMT event returns, Also, It's necessary to wait some time
2852 * between the two consecutive control URBs to relax the target device
2853 * to generate the event. Otherwise, the WMT event cannot return from
2854 * the device successfully.
2855 */
2856 udelay(100);
2857
2858 usb_anchor_urb(urb, &data->ctrl_anchor);
2859 err = usb_submit_urb(urb, GFP_ATOMIC);
2860 if (err < 0) {
2861 /* -EPERM: urb is being killed;
2862 * -ENODEV: device got disconnected
2863 */
2864 if (err != -EPERM && err != -ENODEV)
2865 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
2866 urb, -err);
2867 usb_unanchor_urb(urb);
2868 }
2869}
2870
2871static int btusb_mtk_submit_wmt_recv_urb(struct hci_dev *hdev)
2872{
2873 struct btusb_data *data = hci_get_drvdata(hdev);
2874 struct usb_ctrlrequest *dr;
2875 unsigned char *buf;
2876 int err, size = 64;
2877 unsigned int pipe;
2878 struct urb *urb;
2879
2880 urb = usb_alloc_urb(0, GFP_KERNEL);
2881 if (!urb)
2882 return -ENOMEM;
2883
2884 dr = kmalloc(sizeof(*dr), GFP_KERNEL);
2885 if (!dr) {
2886 usb_free_urb(urb);
2887 return -ENOMEM;
2888 }
2889
2890 dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_IN;
2891 dr->bRequest = 1;
2892 dr->wIndex = cpu_to_le16(0);
2893 dr->wValue = cpu_to_le16(48);
2894 dr->wLength = cpu_to_le16(size);
2895
2896 buf = kmalloc(size, GFP_KERNEL);
2897 if (!buf) {
2898 kfree(dr);
2899 return -ENOMEM;
2900 }
2901
2902 pipe = usb_rcvctrlpipe(data->udev, 0);
2903
2904 usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
2905 buf, size, btusb_mtk_wmt_recv, hdev);
2906
2907 urb->transfer_flags |= URB_FREE_BUFFER;
2908
2909 usb_anchor_urb(urb, &data->ctrl_anchor);
2910 err = usb_submit_urb(urb, GFP_KERNEL);
2911 if (err < 0) {
2912 if (err != -EPERM && err != -ENODEV)
2913 bt_dev_err(hdev, "urb %p submission failed (%d)",
2914 urb, -err);
2915 usb_unanchor_urb(urb);
2916 }
2917
2918 usb_free_urb(urb);
2919
2920 return err;
2921}
2922
2923static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,
2924 struct btmtk_hci_wmt_params *wmt_params)
2925{
2926 struct btusb_data *data = hci_get_drvdata(hdev);
2927 struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
2928 u32 hlen, status = BTMTK_WMT_INVALID;
2929 struct btmtk_hci_wmt_evt *wmt_evt;
2930 struct btmtk_hci_wmt_cmd wc;
2931 struct btmtk_wmt_hdr *hdr;
2932 int err;
2933
2934 /* Submit control IN URB on demand to process the WMT event */
2935 err = btusb_mtk_submit_wmt_recv_urb(hdev);
2936 if (err < 0)
2937 return err;
2938
2939 /* Send the WMT command and wait until the WMT event returns */
2940 hlen = sizeof(*hdr) + wmt_params->dlen;
2941 if (hlen > 255)
2942 return -EINVAL;
2943
2944 hdr = (struct btmtk_wmt_hdr *)&wc;
2945 hdr->dir = 1;
2946 hdr->op = wmt_params->op;
2947 hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
2948 hdr->flag = wmt_params->flag;
2949 memcpy(wc.data, wmt_params->data, wmt_params->dlen);
2950
2951 set_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
2952
2953 err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc);
2954
2955 if (err < 0) {
2956 clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
2957 return err;
2958 }
2959
2960 /* The vendor specific WMT commands are all answered by a vendor
2961 * specific event and will have the Command Status or Command
2962 * Complete as with usual HCI command flow control.
2963 *
2964 * After sending the command, wait for BTUSB_TX_WAIT_VND_EVT
2965 * state to be cleared. The driver specific event receive routine
2966 * will clear that state and with that indicate completion of the
2967 * WMT command.
2968 */
2969 err = wait_on_bit_timeout(&data->flags, BTUSB_TX_WAIT_VND_EVT,
2970 TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
2971 if (err == -EINTR) {
2972 bt_dev_err(hdev, "Execution of wmt command interrupted");
2973 clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
2974 return err;
2975 }
2976
2977 if (err) {
2978 bt_dev_err(hdev, "Execution of wmt command timed out");
2979 clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
2980 return -ETIMEDOUT;
2981 }
2982
2983 /* Parse and handle the return WMT event */
2984 wmt_evt = (struct btmtk_hci_wmt_evt *)data->evt_skb->data;
2985 if (wmt_evt->whdr.op != hdr->op) {
2986 bt_dev_err(hdev, "Wrong op received %d expected %d",
2987 wmt_evt->whdr.op, hdr->op);
2988 err = -EIO;
2989 goto err_free_skb;
2990 }
2991
2992 switch (wmt_evt->whdr.op) {
2993 case BTMTK_WMT_SEMAPHORE:
2994 if (wmt_evt->whdr.flag == 2)
2995 status = BTMTK_WMT_PATCH_UNDONE;
2996 else
2997 status = BTMTK_WMT_PATCH_DONE;
2998 break;
2999 case BTMTK_WMT_FUNC_CTRL:
3000 wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
3001 if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
3002 status = BTMTK_WMT_ON_DONE;
3003 else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
3004 status = BTMTK_WMT_ON_PROGRESS;
3005 else
3006 status = BTMTK_WMT_ON_UNDONE;
3007 break;
3008 }
3009
3010 if (wmt_params->status)
3011 *wmt_params->status = status;
3012
3013err_free_skb:
3014 kfree_skb(data->evt_skb);
3015 data->evt_skb = NULL;
3016
3017 return err;
3018}
3019
3020static int btusb_mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
3021{
3022 struct btmtk_hci_wmt_params wmt_params;
3023 const struct firmware *fw;
3024 const u8 *fw_ptr;
3025 size_t fw_size;
3026 int err, dlen;
3027 u8 flag, param;
3028
3029 err = request_firmware(&fw, fwname, &hdev->dev);
3030 if (err < 0) {
3031 bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
3032 return err;
3033 }
3034
3035 /* Power on data RAM the firmware relies on. */
3036 param = 1;
3037 wmt_params.op = BTMTK_WMT_FUNC_CTRL;
3038 wmt_params.flag = 3;
3039 wmt_params.dlen = sizeof(param);
3040 wmt_params.data = ¶m;
3041 wmt_params.status = NULL;
3042
3043 err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
3044 if (err < 0) {
3045 bt_dev_err(hdev, "Failed to power on data RAM (%d)", err);
3046 return err;
3047 }
3048
3049 fw_ptr = fw->data;
3050 fw_size = fw->size;
3051
3052 /* The size of patch header is 30 bytes, should be skip */
3053 if (fw_size < 30) {
3054 err = -EINVAL;
3055 goto err_release_fw;
3056 }
3057
3058 fw_size -= 30;
3059 fw_ptr += 30;
3060 flag = 1;
3061
3062 wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
3063 wmt_params.status = NULL;
3064
3065 while (fw_size > 0) {
3066 dlen = min_t(int, 250, fw_size);
3067
3068 /* Tell deivice the position in sequence */
3069 if (fw_size - dlen <= 0)
3070 flag = 3;
3071 else if (fw_size < fw->size - 30)
3072 flag = 2;
3073
3074 wmt_params.flag = flag;
3075 wmt_params.dlen = dlen;
3076 wmt_params.data = fw_ptr;
3077
3078 err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
3079 if (err < 0) {
3080 bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
3081 err);
3082 goto err_release_fw;
3083 }
3084
3085 fw_size -= dlen;
3086 fw_ptr += dlen;
3087 }
3088
3089 wmt_params.op = BTMTK_WMT_RST;
3090 wmt_params.flag = 4;
3091 wmt_params.dlen = 0;
3092 wmt_params.data = NULL;
3093 wmt_params.status = NULL;
3094
3095 /* Activate funciton the firmware providing to */
3096 err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
3097 if (err < 0) {
3098 bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
3099 goto err_release_fw;
3100 }
3101
3102 /* Wait a few moments for firmware activation done */
3103 usleep_range(10000, 12000);
3104
3105err_release_fw:
3106 release_firmware(fw);
3107
3108 return err;
3109}
3110
3111static int btusb_mtk_func_query(struct hci_dev *hdev)
3112{
3113 struct btmtk_hci_wmt_params wmt_params;
3114 int status, err;
3115 u8 param = 0;
3116
3117 /* Query whether the function is enabled */
3118 wmt_params.op = BTMTK_WMT_FUNC_CTRL;
3119 wmt_params.flag = 4;
3120 wmt_params.dlen = sizeof(param);
3121 wmt_params.data = ¶m;
3122 wmt_params.status = &status;
3123
3124 err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
3125 if (err < 0) {
3126 bt_dev_err(hdev, "Failed to query function status (%d)", err);
3127 return err;
3128 }
3129
3130 return status;
3131}
3132
3133static int btusb_mtk_reg_read(struct btusb_data *data, u32 reg, u32 *val)
3134{
3135 int pipe, err, size = sizeof(u32);
3136 void *buf;
3137
3138 buf = kzalloc(size, GFP_KERNEL);
3139 if (!buf)
3140 return -ENOMEM;
3141
3142 pipe = usb_rcvctrlpipe(data->udev, 0);
3143 err = usb_control_msg(data->udev, pipe, 0x63,
3144 USB_TYPE_VENDOR | USB_DIR_IN,
3145 reg >> 16, reg & 0xffff,
3146 buf, size, USB_CTRL_SET_TIMEOUT);
3147 if (err < 0)
3148 goto err_free_buf;
3149
3150 *val = get_unaligned_le32(buf);
3151
3152err_free_buf:
3153 kfree(buf);
3154
3155 return err;
3156}
3157
3158static int btusb_mtk_id_get(struct btusb_data *data, u32 *id)
3159{
3160 return btusb_mtk_reg_read(data, 0x80000008, id);
3161}
3162
3163static int btusb_mtk_setup(struct hci_dev *hdev)
3164{
3165 struct btusb_data *data = hci_get_drvdata(hdev);
3166 struct btmtk_hci_wmt_params wmt_params;
3167 ktime_t calltime, delta, rettime;
3168 struct btmtk_tci_sleep tci_sleep;
3169 unsigned long long duration;
3170 struct sk_buff *skb;
3171 const char *fwname;
3172 int err, status;
3173 u32 dev_id;
3174 u8 param;
3175
3176 calltime = ktime_get();
3177
3178 err = btusb_mtk_id_get(data, &dev_id);
3179 if (err < 0) {
3180 bt_dev_err(hdev, "Failed to get device id (%d)", err);
3181 return err;
3182 }
3183
3184 switch (dev_id) {
3185 case 0x7663:
3186 fwname = FIRMWARE_MT7663;
3187 break;
3188 case 0x7668:
3189 fwname = FIRMWARE_MT7668;
3190 break;
3191 default:
3192 bt_dev_err(hdev, "Unsupported support hardware variant (%08x)",
3193 dev_id);
3194 return -ENODEV;
3195 }
3196
3197 /* Query whether the firmware is already download */
3198 wmt_params.op = BTMTK_WMT_SEMAPHORE;
3199 wmt_params.flag = 1;
3200 wmt_params.dlen = 0;
3201 wmt_params.data = NULL;
3202 wmt_params.status = &status;
3203
3204 err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
3205 if (err < 0) {
3206 bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
3207 return err;
3208 }
3209
3210 if (status == BTMTK_WMT_PATCH_DONE) {
3211 bt_dev_info(hdev, "firmware already downloaded");
3212 goto ignore_setup_fw;
3213 }
3214
3215 /* Setup a firmware which the device definitely requires */
3216 err = btusb_mtk_setup_firmware(hdev, fwname);
3217 if (err < 0)
3218 return err;
3219
3220ignore_setup_fw:
3221 err = readx_poll_timeout(btusb_mtk_func_query, hdev, status,
3222 status < 0 || status != BTMTK_WMT_ON_PROGRESS,
3223 2000, 5000000);
3224 /* -ETIMEDOUT happens */
3225 if (err < 0)
3226 return err;
3227
3228 /* The other errors happen in btusb_mtk_func_query */
3229 if (status < 0)
3230 return status;
3231
3232 if (status == BTMTK_WMT_ON_DONE) {
3233 bt_dev_info(hdev, "function already on");
3234 goto ignore_func_on;
3235 }
3236
3237 /* Enable Bluetooth protocol */
3238 param = 1;
3239 wmt_params.op = BTMTK_WMT_FUNC_CTRL;
3240 wmt_params.flag = 0;
3241 wmt_params.dlen = sizeof(param);
3242 wmt_params.data = ¶m;
3243 wmt_params.status = NULL;
3244
3245 err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
3246 if (err < 0) {
3247 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
3248 return err;
3249 }
3250
3251ignore_func_on:
3252 /* Apply the low power environment setup */
3253 tci_sleep.mode = 0x5;
3254 tci_sleep.duration = cpu_to_le16(0x640);
3255 tci_sleep.host_duration = cpu_to_le16(0x640);
3256 tci_sleep.host_wakeup_pin = 0;
3257 tci_sleep.time_compensation = 0;
3258
3259 skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
3260 HCI_INIT_TIMEOUT);
3261 if (IS_ERR(skb)) {
3262 err = PTR_ERR(skb);
3263 bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
3264 return err;
3265 }
3266 kfree_skb(skb);
3267
3268 rettime = ktime_get();
3269 delta = ktime_sub(rettime, calltime);
3270 duration = (unsigned long long)ktime_to_ns(delta) >> 10;
3271
3272 bt_dev_info(hdev, "Device setup in %llu usecs", duration);
3273
3274 return 0;
3275}
3276
3277static int btusb_mtk_shutdown(struct hci_dev *hdev)
3278{
3279 struct btmtk_hci_wmt_params wmt_params;
3280 u8 param = 0;
3281 int err;
3282
3283 /* Disable the device */
3284 wmt_params.op = BTMTK_WMT_FUNC_CTRL;
3285 wmt_params.flag = 0;
3286 wmt_params.dlen = sizeof(param);
3287 wmt_params.data = ¶m;
3288 wmt_params.status = NULL;
3289
3290 err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
3291 if (err < 0) {
3292 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
3293 return err;
3294 }
3295
3296 return 0;
3297}
3298
3299MODULE_FIRMWARE(FIRMWARE_MT7663);
3300MODULE_FIRMWARE(FIRMWARE_MT7668);
3301
3302#ifdef CONFIG_PM
3303/* Configure an out-of-band gpio as wake-up pin, if specified in device tree */
3304static int marvell_config_oob_wake(struct hci_dev *hdev)
3305{
3306 struct sk_buff *skb;
3307 struct btusb_data *data = hci_get_drvdata(hdev);
3308 struct device *dev = &data->udev->dev;
3309 u16 pin, gap, opcode;
3310 int ret;
3311 u8 cmd[5];
3312
3313 /* Move on if no wakeup pin specified */
3314 if (of_property_read_u16(dev->of_node, "marvell,wakeup-pin", &pin) ||
3315 of_property_read_u16(dev->of_node, "marvell,wakeup-gap-ms", &gap))
3316 return 0;
3317
3318 /* Vendor specific command to configure a GPIO as wake-up pin */
3319 opcode = hci_opcode_pack(0x3F, 0x59);
3320 cmd[0] = opcode & 0xFF;
3321 cmd[1] = opcode >> 8;
3322 cmd[2] = 2; /* length of parameters that follow */
3323 cmd[3] = pin;
3324 cmd[4] = gap; /* time in ms, for which wakeup pin should be asserted */
3325
3326 skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
3327 if (!skb) {
3328 bt_dev_err(hdev, "%s: No memory\n", __func__);
3329 return -ENOMEM;
3330 }
3331
3332 skb_put_data(skb, cmd, sizeof(cmd));
3333 hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
3334
3335 ret = btusb_send_frame(hdev, skb);
3336 if (ret) {
3337 bt_dev_err(hdev, "%s: configuration failed\n", __func__);
3338 kfree_skb(skb);
3339 return ret;
3340 }
3341
3342 return 0;
3343}
3344#endif
3345
3346static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
3347 const bdaddr_t *bdaddr)
3348{
3349 struct sk_buff *skb;
3350 u8 buf[8];
3351 long ret;
3352
3353 buf[0] = 0xfe;
3354 buf[1] = sizeof(bdaddr_t);
3355 memcpy(buf + 2, bdaddr, sizeof(bdaddr_t));
3356
3357 skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT);
3358 if (IS_ERR(skb)) {
3359 ret = PTR_ERR(skb);
3360 bt_dev_err(hdev, "changing Marvell device address failed (%ld)",
3361 ret);
3362 return ret;
3363 }
3364 kfree_skb(skb);
3365
3366 return 0;
3367}
3368
3369static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
3370 const bdaddr_t *bdaddr)
3371{
3372 struct sk_buff *skb;
3373 u8 buf[10];
3374 long ret;
3375
3376 buf[0] = 0x01;
3377 buf[1] = 0x01;
3378 buf[2] = 0x00;
3379 buf[3] = sizeof(bdaddr_t);
3380 memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
3381
3382 skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
3383 if (IS_ERR(skb)) {
3384 ret = PTR_ERR(skb);
3385 bt_dev_err(hdev, "Change address command failed (%ld)", ret);
3386 return ret;
3387 }
3388 kfree_skb(skb);
3389
3390 return 0;
3391}
3392
3393#define QCA_DFU_PACKET_LEN 4096
3394
3395#define QCA_GET_TARGET_VERSION 0x09
3396#define QCA_CHECK_STATUS 0x05
3397#define QCA_DFU_DOWNLOAD 0x01
3398
3399#define QCA_SYSCFG_UPDATED 0x40
3400#define QCA_PATCH_UPDATED 0x80
3401#define QCA_DFU_TIMEOUT 3000
3402
3403struct qca_version {
3404 __le32 rom_version;
3405 __le32 patch_version;
3406 __le32 ram_version;
3407 __le32 ref_clock;
3408 __u8 reserved[4];
3409} __packed;
3410
3411struct qca_rampatch_version {
3412 __le16 rom_version;
3413 __le16 patch_version;
3414} __packed;
3415
3416struct qca_device_info {
3417 u32 rom_version;
3418 u8 rampatch_hdr; /* length of header in rampatch */
3419 u8 nvm_hdr; /* length of header in NVM */
3420 u8 ver_offset; /* offset of version structure in rampatch */
3421};
3422
3423static const struct qca_device_info qca_devices_table[] = {
3424 { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
3425 { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
3426 { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
3427 { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
3428 { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
3429 { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
3430};
3431
3432static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request,
3433 void *data, u16 size)
3434{
3435 int pipe, err;
3436 u8 *buf;
3437
3438 buf = kmalloc(size, GFP_KERNEL);
3439 if (!buf)
3440 return -ENOMEM;
3441
3442 /* Found some of USB hosts have IOT issues with ours so that we should
3443 * not wait until HCI layer is ready.
3444 */
3445 pipe = usb_rcvctrlpipe(udev, 0);
3446 err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN,
3447 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
3448 if (err < 0) {
3449 dev_err(&udev->dev, "Failed to access otp area (%d)", err);
3450 goto done;
3451 }
3452
3453 memcpy(data, buf, size);
3454
3455done:
3456 kfree(buf);
3457
3458 return err;
3459}
3460
3461static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
3462 const struct firmware *firmware,
3463 size_t hdr_size)
3464{
3465 struct btusb_data *btdata = hci_get_drvdata(hdev);
3466 struct usb_device *udev = btdata->udev;
3467 size_t count, size, sent = 0;
3468 int pipe, len, err;
3469 u8 *buf;
3470
3471 buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL);
3472 if (!buf)
3473 return -ENOMEM;
3474
3475 count = firmware->size;
3476
3477 size = min_t(size_t, count, hdr_size);
3478 memcpy(buf, firmware->data, size);
3479
3480 /* USB patches should go down to controller through USB path
3481 * because binary format fits to go down through USB channel.
3482 * USB control path is for patching headers and USB bulk is for
3483 * patch body.
3484 */
3485 pipe = usb_sndctrlpipe(udev, 0);
3486 err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR,
3487 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
3488 if (err < 0) {
3489 bt_dev_err(hdev, "Failed to send headers (%d)", err);
3490 goto done;
3491 }
3492
3493 sent += size;
3494 count -= size;
3495
3496 while (count) {
3497 size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
3498
3499 memcpy(buf, firmware->data + sent, size);
3500
3501 pipe = usb_sndbulkpipe(udev, 0x02);
3502 err = usb_bulk_msg(udev, pipe, buf, size, &len,
3503 QCA_DFU_TIMEOUT);
3504 if (err < 0) {
3505 bt_dev_err(hdev, "Failed to send body at %zd of %zd (%d)",
3506 sent, firmware->size, err);
3507 break;
3508 }
3509
3510 if (size != len) {
3511 bt_dev_err(hdev, "Failed to get bulk buffer");
3512 err = -EILSEQ;
3513 break;
3514 }
3515
3516 sent += size;
3517 count -= size;
3518 }
3519
3520done:
3521 kfree(buf);
3522 return err;
3523}
3524
3525static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
3526 struct qca_version *ver,
3527 const struct qca_device_info *info)
3528{
3529 struct qca_rampatch_version *rver;
3530 const struct firmware *fw;
3531 u32 ver_rom, ver_patch;
3532 u16 rver_rom, rver_patch;
3533 char fwname[64];
3534 int err;
3535
3536 ver_rom = le32_to_cpu(ver->rom_version);
3537 ver_patch = le32_to_cpu(ver->patch_version);
3538
3539 snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom);
3540
3541 err = request_firmware(&fw, fwname, &hdev->dev);
3542 if (err) {
3543 bt_dev_err(hdev, "failed to request rampatch file: %s (%d)",
3544 fwname, err);
3545 return err;
3546 }
3547
3548 bt_dev_info(hdev, "using rampatch file: %s", fwname);
3549
3550 rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
3551 rver_rom = le16_to_cpu(rver->rom_version);
3552 rver_patch = le16_to_cpu(rver->patch_version);
3553
3554 bt_dev_info(hdev, "QCA: patch rome 0x%x build 0x%x, "
3555 "firmware rome 0x%x build 0x%x",
3556 rver_rom, rver_patch, ver_rom, ver_patch);
3557
3558 if (rver_rom != ver_rom || rver_patch <= ver_patch) {
3559 bt_dev_err(hdev, "rampatch file version did not match with firmware");
3560 err = -EINVAL;
3561 goto done;
3562 }
3563
3564 err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr);
3565
3566done:
3567 release_firmware(fw);
3568
3569 return err;
3570}
3571
3572static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
3573 struct qca_version *ver,
3574 const struct qca_device_info *info)
3575{
3576 const struct firmware *fw;
3577 char fwname[64];
3578 int err;
3579
3580 snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
3581 le32_to_cpu(ver->rom_version));
3582
3583 err = request_firmware(&fw, fwname, &hdev->dev);
3584 if (err) {
3585 bt_dev_err(hdev, "failed to request NVM file: %s (%d)",
3586 fwname, err);
3587 return err;
3588 }
3589
3590 bt_dev_info(hdev, "using NVM file: %s", fwname);
3591
3592 err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
3593
3594 release_firmware(fw);
3595
3596 return err;
3597}
3598
3599/* identify the ROM version and check whether patches are needed */
3600static bool btusb_qca_need_patch(struct usb_device *udev)
3601{
3602 struct qca_version ver;
3603
3604 if (btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver,
3605 sizeof(ver)) < 0)
3606 return false;
3607 /* only low ROM versions need patches */
3608 return !(le32_to_cpu(ver.rom_version) & ~0xffffU);
3609}
3610
3611static int btusb_setup_qca(struct hci_dev *hdev)
3612{
3613 struct btusb_data *btdata = hci_get_drvdata(hdev);
3614 struct usb_device *udev = btdata->udev;
3615 const struct qca_device_info *info = NULL;
3616 struct qca_version ver;
3617 u32 ver_rom;
3618 u8 status;
3619 int i, err;
3620
3621 err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver,
3622 sizeof(ver));
3623 if (err < 0)
3624 return err;
3625
3626 ver_rom = le32_to_cpu(ver.rom_version);
3627 /* Don't care about high ROM versions */
3628 if (ver_rom & ~0xffffU)
3629 return 0;
3630
3631 for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
3632 if (ver_rom == qca_devices_table[i].rom_version)
3633 info = &qca_devices_table[i];
3634 }
3635 if (!info) {
3636 bt_dev_err(hdev, "don't support firmware rome 0x%x", ver_rom);
3637 return -ENODEV;
3638 }
3639
3640 err = btusb_qca_send_vendor_req(udev, QCA_CHECK_STATUS, &status,
3641 sizeof(status));
3642 if (err < 0)
3643 return err;
3644
3645 if (!(status & QCA_PATCH_UPDATED)) {
3646 err = btusb_setup_qca_load_rampatch(hdev, &ver, info);
3647 if (err < 0)
3648 return err;
3649 }
3650
3651 if (!(status & QCA_SYSCFG_UPDATED)) {
3652 err = btusb_setup_qca_load_nvm(hdev, &ver, info);
3653 if (err < 0)
3654 return err;
3655 }
3656
3657 return 0;
3658}
3659
3660static inline int __set_diag_interface(struct hci_dev *hdev)
3661{
3662 struct btusb_data *data = hci_get_drvdata(hdev);
3663 struct usb_interface *intf = data->diag;
3664 int i;
3665
3666 if (!data->diag)
3667 return -ENODEV;
3668
3669 data->diag_tx_ep = NULL;
3670 data->diag_rx_ep = NULL;
3671
3672 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
3673 struct usb_endpoint_descriptor *ep_desc;
3674
3675 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
3676
3677 if (!data->diag_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
3678 data->diag_tx_ep = ep_desc;
3679 continue;
3680 }
3681
3682 if (!data->diag_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
3683 data->diag_rx_ep = ep_desc;
3684 continue;
3685 }
3686 }
3687
3688 if (!data->diag_tx_ep || !data->diag_rx_ep) {
3689 bt_dev_err(hdev, "invalid diagnostic descriptors");
3690 return -ENODEV;
3691 }
3692
3693 return 0;
3694}
3695
3696static struct urb *alloc_diag_urb(struct hci_dev *hdev, bool enable)
3697{
3698 struct btusb_data *data = hci_get_drvdata(hdev);
3699 struct sk_buff *skb;
3700 struct urb *urb;
3701 unsigned int pipe;
3702
3703 if (!data->diag_tx_ep)
3704 return ERR_PTR(-ENODEV);
3705
3706 urb = usb_alloc_urb(0, GFP_KERNEL);
3707 if (!urb)
3708 return ERR_PTR(-ENOMEM);
3709
3710 skb = bt_skb_alloc(2, GFP_KERNEL);
3711 if (!skb) {
3712 usb_free_urb(urb);
3713 return ERR_PTR(-ENOMEM);
3714 }
3715
3716 skb_put_u8(skb, 0xf0);
3717 skb_put_u8(skb, enable);
3718
3719 pipe = usb_sndbulkpipe(data->udev, data->diag_tx_ep->bEndpointAddress);
3720
3721 usb_fill_bulk_urb(urb, data->udev, pipe,
3722 skb->data, skb->len, btusb_tx_complete, skb);
3723
3724 skb->dev = (void *)hdev;
3725
3726 return urb;
3727}
3728
3729static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable)
3730{
3731 struct btusb_data *data = hci_get_drvdata(hdev);
3732 struct urb *urb;
3733
3734 if (!data->diag)
3735 return -ENODEV;
3736
3737 if (!test_bit(HCI_RUNNING, &hdev->flags))
3738 return -ENETDOWN;
3739
3740 urb = alloc_diag_urb(hdev, enable);
3741 if (IS_ERR(urb))
3742 return PTR_ERR(urb);
3743
3744 return submit_or_queue_tx_urb(hdev, urb);
3745}
3746
3747#ifdef CONFIG_PM
3748static irqreturn_t btusb_oob_wake_handler(int irq, void *priv)
3749{
3750 struct btusb_data *data = priv;
3751
3752 pm_wakeup_event(&data->udev->dev, 0);
3753 pm_system_wakeup();
3754
3755 /* Disable only if not already disabled (keep it balanced) */
3756 if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {
3757 disable_irq_nosync(irq);
3758 disable_irq_wake(irq);
3759 }
3760 return IRQ_HANDLED;
3761}
3762
3763static const struct of_device_id btusb_match_table[] = {
3764 { .compatible = "usb1286,204e" },
3765 { .compatible = "usbcf3,e300" }, /* QCA6174A */
3766 { .compatible = "usb4ca,301a" }, /* QCA6174A (Lite-On) */
3767 { }
3768};
3769MODULE_DEVICE_TABLE(of, btusb_match_table);
3770
3771/* Use an oob wakeup pin? */
3772static int btusb_config_oob_wake(struct hci_dev *hdev)
3773{
3774 struct btusb_data *data = hci_get_drvdata(hdev);
3775 struct device *dev = &data->udev->dev;
3776 int irq, ret;
3777
3778 clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags);
3779
3780 if (!of_match_device(btusb_match_table, dev))
3781 return 0;
3782
3783 /* Move on if no IRQ specified */
3784 irq = of_irq_get_byname(dev->of_node, "wakeup");
3785 if (irq <= 0) {
3786 bt_dev_dbg(hdev, "%s: no OOB Wakeup IRQ in DT", __func__);
3787 return 0;
3788 }
3789
3790 irq_set_status_flags(irq, IRQ_NOAUTOEN);
3791 ret = devm_request_irq(&hdev->dev, irq, btusb_oob_wake_handler,
3792 0, "OOB Wake-on-BT", data);
3793 if (ret) {
3794 bt_dev_err(hdev, "%s: IRQ request failed", __func__);
3795 return ret;
3796 }
3797
3798 ret = device_init_wakeup(dev, true);
3799 if (ret) {
3800 bt_dev_err(hdev, "%s: failed to init_wakeup", __func__);
3801 return ret;
3802 }
3803
3804 data->oob_wake_irq = irq;
3805 bt_dev_info(hdev, "OOB Wake-on-BT configured at IRQ %u", irq);
3806 return 0;
3807}
3808#endif
3809
3810static void btusb_check_needs_reset_resume(struct usb_interface *intf)
3811{
3812 if (dmi_check_system(btusb_needs_reset_resume_table))
3813 interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
3814}
3815
3816static bool btusb_prevent_wake(struct hci_dev *hdev)
3817{
3818 struct btusb_data *data = hci_get_drvdata(hdev);
3819
3820 if (test_bit(BTUSB_WAKEUP_DISABLE, &data->flags))
3821 return true;
3822
3823 return !device_may_wakeup(&data->udev->dev);
3824}
3825
3826static int btusb_probe(struct usb_interface *intf,
3827 const struct usb_device_id *id)
3828{
3829 struct usb_endpoint_descriptor *ep_desc;
3830 struct gpio_desc *reset_gpio;
3831 struct btusb_data *data;
3832 struct hci_dev *hdev;
3833 unsigned ifnum_base;
3834 int i, err;
3835
3836 BT_DBG("intf %p id %p", intf, id);
3837
3838 /* interface numbers are hardcoded in the spec */
3839 if (intf->cur_altsetting->desc.bInterfaceNumber != 0) {
3840 if (!(id->driver_info & BTUSB_IFNUM_2))
3841 return -ENODEV;
3842 if (intf->cur_altsetting->desc.bInterfaceNumber != 2)
3843 return -ENODEV;
3844 }
3845
3846 ifnum_base = intf->cur_altsetting->desc.bInterfaceNumber;
3847
3848 if (!id->driver_info) {
3849 const struct usb_device_id *match;
3850
3851 match = usb_match_id(intf, blacklist_table);
3852 if (match)
3853 id = match;
3854 }
3855
3856 if (id->driver_info == BTUSB_IGNORE)
3857 return -ENODEV;
3858
3859 if (id->driver_info & BTUSB_ATH3012) {
3860 struct usb_device *udev = interface_to_usbdev(intf);
3861
3862 /* Old firmware would otherwise let ath3k driver load
3863 * patch and sysconfig files
3864 */
3865 if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001 &&
3866 !btusb_qca_need_patch(udev))
3867 return -ENODEV;
3868 }
3869
3870 data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
3871 if (!data)
3872 return -ENOMEM;
3873
3874 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
3875 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
3876
3877 if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) {
3878 data->intr_ep = ep_desc;
3879 continue;
3880 }
3881
3882 if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
3883 data->bulk_tx_ep = ep_desc;
3884 continue;
3885 }
3886
3887 if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
3888 data->bulk_rx_ep = ep_desc;
3889 continue;
3890 }
3891 }
3892
3893 if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep)
3894 return -ENODEV;
3895
3896 if (id->driver_info & BTUSB_AMP) {
3897 data->cmdreq_type = USB_TYPE_CLASS | 0x01;
3898 data->cmdreq = 0x2b;
3899 } else {
3900 data->cmdreq_type = USB_TYPE_CLASS;
3901 data->cmdreq = 0x00;
3902 }
3903
3904 data->udev = interface_to_usbdev(intf);
3905 data->intf = intf;
3906
3907 INIT_WORK(&data->work, btusb_work);
3908 INIT_WORK(&data->waker, btusb_waker);
3909 init_usb_anchor(&data->deferred);
3910 init_usb_anchor(&data->tx_anchor);
3911 spin_lock_init(&data->txlock);
3912
3913 init_usb_anchor(&data->intr_anchor);
3914 init_usb_anchor(&data->bulk_anchor);
3915 init_usb_anchor(&data->isoc_anchor);
3916 init_usb_anchor(&data->diag_anchor);
3917 init_usb_anchor(&data->ctrl_anchor);
3918 spin_lock_init(&data->rxlock);
3919
3920 if (id->driver_info & BTUSB_INTEL_NEW) {
3921 data->recv_event = btusb_recv_event_intel;
3922 data->recv_bulk = btusb_recv_bulk_intel;
3923 set_bit(BTUSB_BOOTLOADER, &data->flags);
3924 } else {
3925 data->recv_event = hci_recv_frame;
3926 data->recv_bulk = btusb_recv_bulk;
3927 }
3928
3929 hdev = hci_alloc_dev();
3930 if (!hdev)
3931 return -ENOMEM;
3932
3933 hdev->bus = HCI_USB;
3934 hci_set_drvdata(hdev, data);
3935
3936 if (id->driver_info & BTUSB_AMP)
3937 hdev->dev_type = HCI_AMP;
3938 else
3939 hdev->dev_type = HCI_PRIMARY;
3940
3941 data->hdev = hdev;
3942
3943 SET_HCIDEV_DEV(hdev, &intf->dev);
3944
3945 reset_gpio = gpiod_get_optional(&data->udev->dev, "reset",
3946 GPIOD_OUT_LOW);
3947 if (IS_ERR(reset_gpio)) {
3948 err = PTR_ERR(reset_gpio);
3949 goto out_free_dev;
3950 } else if (reset_gpio) {
3951 data->reset_gpio = reset_gpio;
3952 }
3953
3954 hdev->open = btusb_open;
3955 hdev->close = btusb_close;
3956 hdev->flush = btusb_flush;
3957 hdev->send = btusb_send_frame;
3958 hdev->notify = btusb_notify;
3959 hdev->prevent_wake = btusb_prevent_wake;
3960
3961#ifdef CONFIG_PM
3962 err = btusb_config_oob_wake(hdev);
3963 if (err)
3964 goto out_free_dev;
3965
3966 /* Marvell devices may need a specific chip configuration */
3967 if (id->driver_info & BTUSB_MARVELL && data->oob_wake_irq) {
3968 err = marvell_config_oob_wake(hdev);
3969 if (err)
3970 goto out_free_dev;
3971 }
3972#endif
3973 if (id->driver_info & BTUSB_CW6622)
3974 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
3975
3976 if (id->driver_info & BTUSB_BCM2045)
3977 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
3978
3979 if (id->driver_info & BTUSB_BCM92035)
3980 hdev->setup = btusb_setup_bcm92035;
3981
3982 if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) &&
3983 (id->driver_info & BTUSB_BCM_PATCHRAM)) {
3984 hdev->manufacturer = 15;
3985 hdev->setup = btbcm_setup_patchram;
3986 hdev->set_diag = btusb_bcm_set_diag;
3987 hdev->set_bdaddr = btbcm_set_bdaddr;
3988
3989 /* Broadcom LM_DIAG Interface numbers are hardcoded */
3990 data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
3991 }
3992
3993 if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) &&
3994 (id->driver_info & BTUSB_BCM_APPLE)) {
3995 hdev->manufacturer = 15;
3996 hdev->setup = btbcm_setup_apple;
3997 hdev->set_diag = btusb_bcm_set_diag;
3998
3999 /* Broadcom LM_DIAG Interface numbers are hardcoded */
4000 data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
4001 }
4002
4003 if (id->driver_info & BTUSB_INTEL) {
4004 hdev->manufacturer = 2;
4005 hdev->setup = btusb_setup_intel;
4006 hdev->shutdown = btusb_shutdown_intel;
4007 hdev->set_diag = btintel_set_diag_mfg;
4008 hdev->set_bdaddr = btintel_set_bdaddr;
4009 hdev->cmd_timeout = btusb_intel_cmd_timeout;
4010 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
4011 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
4012 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
4013 }
4014
4015 if (id->driver_info & BTUSB_INTEL_NEW) {
4016 hdev->manufacturer = 2;
4017 hdev->send = btusb_send_frame_intel;
4018 hdev->setup = btusb_setup_intel_new;
4019 hdev->shutdown = btusb_shutdown_intel_new;
4020 hdev->hw_error = btintel_hw_error;
4021 hdev->set_diag = btintel_set_diag;
4022 hdev->set_bdaddr = btintel_set_bdaddr;
4023 hdev->cmd_timeout = btusb_intel_cmd_timeout;
4024 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
4025 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
4026 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
4027 }
4028
4029 if (id->driver_info & BTUSB_MARVELL)
4030 hdev->set_bdaddr = btusb_set_bdaddr_marvell;
4031
4032 if (IS_ENABLED(CONFIG_BT_HCIBTUSB_MTK) &&
4033 (id->driver_info & BTUSB_MEDIATEK)) {
4034 hdev->setup = btusb_mtk_setup;
4035 hdev->shutdown = btusb_mtk_shutdown;
4036 hdev->manufacturer = 70;
4037 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
4038 }
4039
4040 if (id->driver_info & BTUSB_SWAVE) {
4041 set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
4042 set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
4043 }
4044
4045 if (id->driver_info & BTUSB_INTEL_BOOT) {
4046 hdev->manufacturer = 2;
4047 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
4048 }
4049
4050 if (id->driver_info & BTUSB_ATH3012) {
4051 data->setup_on_usb = btusb_setup_qca;
4052 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
4053 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
4054 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
4055 }
4056
4057 if (id->driver_info & BTUSB_QCA_ROME) {
4058 data->setup_on_usb = btusb_setup_qca;
4059 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
4060 hdev->cmd_timeout = btusb_qca_cmd_timeout;
4061 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
4062 btusb_check_needs_reset_resume(intf);
4063 }
4064
4065 if (id->driver_info & BTUSB_AMP) {
4066 /* AMP controllers do not support SCO packets */
4067 data->isoc = NULL;
4068 } else {
4069 /* Interface orders are hardcoded in the specification */
4070 data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
4071 data->isoc_ifnum = ifnum_base + 1;
4072 }
4073
4074 if (IS_ENABLED(CONFIG_BT_HCIBTUSB_RTL) &&
4075 (id->driver_info & BTUSB_REALTEK)) {
4076 hdev->setup = btrtl_setup_realtek;
4077 hdev->shutdown = btrtl_shutdown_realtek;
4078 hdev->cmd_timeout = btusb_rtl_cmd_timeout;
4079
4080 /* Realtek devices lose their updated firmware over global
4081 * suspend that means host doesn't send SET_FEATURE
4082 * (DEVICE_REMOTE_WAKEUP)
4083 */
4084 set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
4085 if (btusb_find_altsetting(data, 1))
4086 set_bit(BTUSB_USE_ALT1_FOR_WBS, &data->flags);
4087 else
4088 bt_dev_err(hdev, "Device does not support ALT setting 1");
4089 }
4090
4091 if (!reset)
4092 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
4093
4094 if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
4095 if (!disable_scofix)
4096 set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
4097 }
4098
4099 if (id->driver_info & BTUSB_BROKEN_ISOC)
4100 data->isoc = NULL;
4101
4102 if (id->driver_info & BTUSB_WIDEBAND_SPEECH)
4103 set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
4104
4105 if (id->driver_info & BTUSB_VALID_LE_STATES)
4106 set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
4107
4108 if (id->driver_info & BTUSB_DIGIANSWER) {
4109 data->cmdreq_type = USB_TYPE_VENDOR;
4110 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
4111 }
4112
4113 if (id->driver_info & BTUSB_CSR) {
4114 struct usb_device *udev = data->udev;
4115 u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
4116
4117 /* Old firmware would otherwise execute USB reset */
4118 if (bcdDevice < 0x117)
4119 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
4120
4121 /* This must be set first in case we disable it for fakes */
4122 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
4123
4124 /* Fake CSR devices with broken commands */
4125 if (le16_to_cpu(udev->descriptor.idVendor) == 0x0a12 &&
4126 le16_to_cpu(udev->descriptor.idProduct) == 0x0001)
4127 hdev->setup = btusb_setup_csr;
4128 }
4129
4130 if (id->driver_info & BTUSB_SNIFFER) {
4131 struct usb_device *udev = data->udev;
4132
4133 /* New sniffer firmware has crippled HCI interface */
4134 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
4135 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
4136 }
4137
4138 if (id->driver_info & BTUSB_INTEL_BOOT) {
4139 /* A bug in the bootloader causes that interrupt interface is
4140 * only enabled after receiving SetInterface(0, AltSetting=0).
4141 */
4142 err = usb_set_interface(data->udev, 0, 0);
4143 if (err < 0) {
4144 BT_ERR("failed to set interface 0, alt 0 %d", err);
4145 goto out_free_dev;
4146 }
4147 }
4148
4149 if (data->isoc) {
4150 err = usb_driver_claim_interface(&btusb_driver,
4151 data->isoc, data);
4152 if (err < 0)
4153 goto out_free_dev;
4154 }
4155
4156 if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && data->diag) {
4157 if (!usb_driver_claim_interface(&btusb_driver,
4158 data->diag, data))
4159 __set_diag_interface(hdev);
4160 else
4161 data->diag = NULL;
4162 }
4163
4164 if (enable_autosuspend)
4165 usb_enable_autosuspend(data->udev);
4166
4167 err = hci_register_dev(hdev);
4168 if (err < 0)
4169 goto out_free_dev;
4170
4171 usb_set_intfdata(intf, data);
4172
4173 return 0;
4174
4175out_free_dev:
4176 if (data->reset_gpio)
4177 gpiod_put(data->reset_gpio);
4178 hci_free_dev(hdev);
4179 return err;
4180}
4181
4182static void btusb_disconnect(struct usb_interface *intf)
4183{
4184 struct btusb_data *data = usb_get_intfdata(intf);
4185 struct hci_dev *hdev;
4186
4187 BT_DBG("intf %p", intf);
4188
4189 if (!data)
4190 return;
4191
4192 hdev = data->hdev;
4193 usb_set_intfdata(data->intf, NULL);
4194
4195 if (data->isoc)
4196 usb_set_intfdata(data->isoc, NULL);
4197
4198 if (data->diag)
4199 usb_set_intfdata(data->diag, NULL);
4200
4201 hci_unregister_dev(hdev);
4202
4203 if (intf == data->intf) {
4204 if (data->isoc)
4205 usb_driver_release_interface(&btusb_driver, data->isoc);
4206 if (data->diag)
4207 usb_driver_release_interface(&btusb_driver, data->diag);
4208 } else if (intf == data->isoc) {
4209 if (data->diag)
4210 usb_driver_release_interface(&btusb_driver, data->diag);
4211 usb_driver_release_interface(&btusb_driver, data->intf);
4212 } else if (intf == data->diag) {
4213 usb_driver_release_interface(&btusb_driver, data->intf);
4214 if (data->isoc)
4215 usb_driver_release_interface(&btusb_driver, data->isoc);
4216 }
4217
4218 if (data->oob_wake_irq)
4219 device_init_wakeup(&data->udev->dev, false);
4220
4221 if (data->reset_gpio)
4222 gpiod_put(data->reset_gpio);
4223
4224 hci_free_dev(hdev);
4225}
4226
4227#ifdef CONFIG_PM
4228static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
4229{
4230 struct btusb_data *data = usb_get_intfdata(intf);
4231
4232 BT_DBG("intf %p", intf);
4233
4234 if (data->suspend_count++)
4235 return 0;
4236
4237 spin_lock_irq(&data->txlock);
4238 if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) {
4239 set_bit(BTUSB_SUSPENDING, &data->flags);
4240 spin_unlock_irq(&data->txlock);
4241 } else {
4242 spin_unlock_irq(&data->txlock);
4243 data->suspend_count--;
4244 return -EBUSY;
4245 }
4246
4247 cancel_work_sync(&data->work);
4248
4249 btusb_stop_traffic(data);
4250 usb_kill_anchored_urbs(&data->tx_anchor);
4251
4252 if (data->oob_wake_irq && device_may_wakeup(&data->udev->dev)) {
4253 set_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags);
4254 enable_irq_wake(data->oob_wake_irq);
4255 enable_irq(data->oob_wake_irq);
4256 }
4257
4258 /* For global suspend, Realtek devices lose the loaded fw
4259 * in them. But for autosuspend, firmware should remain.
4260 * Actually, it depends on whether the usb host sends
4261 * set feature (enable wakeup) or not.
4262 */
4263 if (test_bit(BTUSB_WAKEUP_DISABLE, &data->flags)) {
4264 if (PMSG_IS_AUTO(message) &&
4265 device_can_wakeup(&data->udev->dev))
4266 data->udev->do_remote_wakeup = 1;
4267 else if (!PMSG_IS_AUTO(message))
4268 data->udev->reset_resume = 1;
4269 }
4270
4271 return 0;
4272}
4273
4274static void play_deferred(struct btusb_data *data)
4275{
4276 struct urb *urb;
4277 int err;
4278
4279 while ((urb = usb_get_from_anchor(&data->deferred))) {
4280 usb_anchor_urb(urb, &data->tx_anchor);
4281
4282 err = usb_submit_urb(urb, GFP_ATOMIC);
4283 if (err < 0) {
4284 if (err != -EPERM && err != -ENODEV)
4285 BT_ERR("%s urb %p submission failed (%d)",
4286 data->hdev->name, urb, -err);
4287 kfree(urb->setup_packet);
4288 usb_unanchor_urb(urb);
4289 usb_free_urb(urb);
4290 break;
4291 }
4292
4293 data->tx_in_flight++;
4294 usb_free_urb(urb);
4295 }
4296
4297 /* Cleanup the rest deferred urbs. */
4298 while ((urb = usb_get_from_anchor(&data->deferred))) {
4299 kfree(urb->setup_packet);
4300 usb_free_urb(urb);
4301 }
4302}
4303
4304static int btusb_resume(struct usb_interface *intf)
4305{
4306 struct btusb_data *data = usb_get_intfdata(intf);
4307 struct hci_dev *hdev = data->hdev;
4308 int err = 0;
4309
4310 BT_DBG("intf %p", intf);
4311
4312 if (--data->suspend_count)
4313 return 0;
4314
4315 /* Disable only if not already disabled (keep it balanced) */
4316 if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {
4317 disable_irq(data->oob_wake_irq);
4318 disable_irq_wake(data->oob_wake_irq);
4319 }
4320
4321 if (!test_bit(HCI_RUNNING, &hdev->flags))
4322 goto done;
4323
4324 if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) {
4325 err = btusb_submit_intr_urb(hdev, GFP_NOIO);
4326 if (err < 0) {
4327 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
4328 goto failed;
4329 }
4330 }
4331
4332 if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) {
4333 err = btusb_submit_bulk_urb(hdev, GFP_NOIO);
4334 if (err < 0) {
4335 clear_bit(BTUSB_BULK_RUNNING, &data->flags);
4336 goto failed;
4337 }
4338
4339 btusb_submit_bulk_urb(hdev, GFP_NOIO);
4340 }
4341
4342 if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
4343 if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0)
4344 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
4345 else
4346 btusb_submit_isoc_urb(hdev, GFP_NOIO);
4347 }
4348
4349 spin_lock_irq(&data->txlock);
4350 play_deferred(data);
4351 clear_bit(BTUSB_SUSPENDING, &data->flags);
4352 spin_unlock_irq(&data->txlock);
4353 schedule_work(&data->work);
4354
4355 return 0;
4356
4357failed:
4358 usb_scuttle_anchored_urbs(&data->deferred);
4359done:
4360 spin_lock_irq(&data->txlock);
4361 clear_bit(BTUSB_SUSPENDING, &data->flags);
4362 spin_unlock_irq(&data->txlock);
4363
4364 return err;
4365}
4366#endif
4367
4368static struct usb_driver btusb_driver = {
4369 .name = "btusb",
4370 .probe = btusb_probe,
4371 .disconnect = btusb_disconnect,
4372#ifdef CONFIG_PM
4373 .suspend = btusb_suspend,
4374 .resume = btusb_resume,
4375#endif
4376 .id_table = btusb_table,
4377 .supports_autosuspend = 1,
4378 .disable_hub_initiated_lpm = 1,
4379};
4380
4381module_usb_driver(btusb_driver);
4382
4383module_param(disable_scofix, bool, 0644);
4384MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
4385
4386module_param(force_scofix, bool, 0644);
4387MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
4388
4389module_param(enable_autosuspend, bool, 0644);
4390MODULE_PARM_DESC(enable_autosuspend, "Enable USB autosuspend by default");
4391
4392module_param(reset, bool, 0644);
4393MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
4394
4395MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
4396MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION);
4397MODULE_VERSION(VERSION);
4398MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 *
4 * Generic Bluetooth USB driver
5 *
6 * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
7 */
8
9#include <linux/dmi.h>
10#include <linux/module.h>
11#include <linux/usb.h>
12#include <linux/usb/quirks.h>
13#include <linux/firmware.h>
14#include <linux/iopoll.h>
15#include <linux/of_device.h>
16#include <linux/of_irq.h>
17#include <linux/suspend.h>
18#include <linux/gpio/consumer.h>
19#include <linux/debugfs.h>
20#include <asm/unaligned.h>
21
22#include <net/bluetooth/bluetooth.h>
23#include <net/bluetooth/hci_core.h>
24
25#include "btintel.h"
26#include "btbcm.h"
27#include "btrtl.h"
28#include "btmtk.h"
29
30#define VERSION "0.8"
31
32static bool disable_scofix;
33static bool force_scofix;
34static bool enable_autosuspend = IS_ENABLED(CONFIG_BT_HCIBTUSB_AUTOSUSPEND);
35static bool enable_poll_sync = IS_ENABLED(CONFIG_BT_HCIBTUSB_POLL_SYNC);
36static bool reset = true;
37
38static struct usb_driver btusb_driver;
39
40#define BTUSB_IGNORE BIT(0)
41#define BTUSB_DIGIANSWER BIT(1)
42#define BTUSB_CSR BIT(2)
43#define BTUSB_SNIFFER BIT(3)
44#define BTUSB_BCM92035 BIT(4)
45#define BTUSB_BROKEN_ISOC BIT(5)
46#define BTUSB_WRONG_SCO_MTU BIT(6)
47#define BTUSB_ATH3012 BIT(7)
48#define BTUSB_INTEL_COMBINED BIT(8)
49#define BTUSB_INTEL_BOOT BIT(9)
50#define BTUSB_BCM_PATCHRAM BIT(10)
51#define BTUSB_MARVELL BIT(11)
52#define BTUSB_SWAVE BIT(12)
53#define BTUSB_AMP BIT(13)
54#define BTUSB_QCA_ROME BIT(14)
55#define BTUSB_BCM_APPLE BIT(15)
56#define BTUSB_REALTEK BIT(16)
57#define BTUSB_BCM2045 BIT(17)
58#define BTUSB_IFNUM_2 BIT(18)
59#define BTUSB_CW6622 BIT(19)
60#define BTUSB_MEDIATEK BIT(20)
61#define BTUSB_WIDEBAND_SPEECH BIT(21)
62#define BTUSB_VALID_LE_STATES BIT(22)
63#define BTUSB_QCA_WCN6855 BIT(23)
64#define BTUSB_INTEL_BROKEN_SHUTDOWN_LED BIT(24)
65#define BTUSB_INTEL_BROKEN_INITIAL_NCMD BIT(25)
66#define BTUSB_INTEL_NO_WBS_SUPPORT BIT(26)
67#define BTUSB_ACTIONS_SEMI BIT(27)
68
69static const struct usb_device_id btusb_table[] = {
70 /* Generic Bluetooth USB device */
71 { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
72
73 /* Generic Bluetooth AMP device */
74 { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
75
76 /* Generic Bluetooth USB interface */
77 { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
78
79 /* Apple-specific (Broadcom) devices */
80 { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
81 .driver_info = BTUSB_BCM_APPLE | BTUSB_IFNUM_2 },
82
83 /* MediaTek MT76x0E */
84 { USB_DEVICE(0x0e8d, 0x763f) },
85
86 /* Broadcom SoftSailing reporting vendor specific */
87 { USB_DEVICE(0x0a5c, 0x21e1) },
88
89 /* Apple MacBookPro 7,1 */
90 { USB_DEVICE(0x05ac, 0x8213) },
91
92 /* Apple iMac11,1 */
93 { USB_DEVICE(0x05ac, 0x8215) },
94
95 /* Apple MacBookPro6,2 */
96 { USB_DEVICE(0x05ac, 0x8218) },
97
98 /* Apple MacBookAir3,1, MacBookAir3,2 */
99 { USB_DEVICE(0x05ac, 0x821b) },
100
101 /* Apple MacBookAir4,1 */
102 { USB_DEVICE(0x05ac, 0x821f) },
103
104 /* Apple MacBookPro8,2 */
105 { USB_DEVICE(0x05ac, 0x821a) },
106
107 /* Apple MacMini5,1 */
108 { USB_DEVICE(0x05ac, 0x8281) },
109
110 /* AVM BlueFRITZ! USB v2.0 */
111 { USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE },
112
113 /* Bluetooth Ultraport Module from IBM */
114 { USB_DEVICE(0x04bf, 0x030a) },
115
116 /* ALPS Modules with non-standard id */
117 { USB_DEVICE(0x044e, 0x3001) },
118 { USB_DEVICE(0x044e, 0x3002) },
119
120 /* Ericsson with non-standard id */
121 { USB_DEVICE(0x0bdb, 0x1002) },
122
123 /* Canyon CN-BTU1 with HID interfaces */
124 { USB_DEVICE(0x0c10, 0x0000) },
125
126 /* Broadcom BCM20702B0 (Dynex/Insignia) */
127 { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
128
129 /* Broadcom BCM43142A0 (Foxconn/Lenovo) */
130 { USB_VENDOR_AND_INTERFACE_INFO(0x105b, 0xff, 0x01, 0x01),
131 .driver_info = BTUSB_BCM_PATCHRAM },
132
133 /* Broadcom BCM920703 (HTC Vive) */
134 { USB_VENDOR_AND_INTERFACE_INFO(0x0bb4, 0xff, 0x01, 0x01),
135 .driver_info = BTUSB_BCM_PATCHRAM },
136
137 /* Foxconn - Hon Hai */
138 { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
139 .driver_info = BTUSB_BCM_PATCHRAM },
140
141 /* Lite-On Technology - Broadcom based */
142 { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
143 .driver_info = BTUSB_BCM_PATCHRAM },
144
145 /* Broadcom devices with vendor specific id */
146 { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
147 .driver_info = BTUSB_BCM_PATCHRAM },
148
149 /* ASUSTek Computer - Broadcom based */
150 { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
151 .driver_info = BTUSB_BCM_PATCHRAM },
152
153 /* Belkin F8065bf - Broadcom based */
154 { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
155 .driver_info = BTUSB_BCM_PATCHRAM },
156
157 /* IMC Networks - Broadcom based */
158 { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
159 .driver_info = BTUSB_BCM_PATCHRAM },
160
161 /* Dell Computer - Broadcom based */
162 { USB_VENDOR_AND_INTERFACE_INFO(0x413c, 0xff, 0x01, 0x01),
163 .driver_info = BTUSB_BCM_PATCHRAM },
164
165 /* Toshiba Corp - Broadcom based */
166 { USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
167 .driver_info = BTUSB_BCM_PATCHRAM },
168
169 /* Intel Bluetooth USB Bootloader (RAM module) */
170 { USB_DEVICE(0x8087, 0x0a5a),
171 .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
172
173 { } /* Terminating entry */
174};
175
176MODULE_DEVICE_TABLE(usb, btusb_table);
177
178static const struct usb_device_id quirks_table[] = {
179 /* CSR BlueCore devices */
180 { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR },
181
182 /* Broadcom BCM2033 without firmware */
183 { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
184
185 /* Broadcom BCM2045 devices */
186 { USB_DEVICE(0x0a5c, 0x2045), .driver_info = BTUSB_BCM2045 },
187
188 /* Atheros 3011 with sflash firmware */
189 { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
190 { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
191 { USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
192 { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
193 { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
194 { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
195 { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
196
197 /* Atheros AR9285 Malbec with sflash firmware */
198 { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
199
200 /* Atheros 3012 with sflash firmware */
201 { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
202 { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
203 { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
204 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
205 { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
206 { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
207 { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
208 { USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 },
209 { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
210 { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
211 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
212 { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
213 { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
214 { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
215 { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
216 { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
217 { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
218 { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
219 { USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
220 { USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 },
221 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
222 { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
223 { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
224 { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
225 { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
226 { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
227 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
228 { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
229 { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
230 { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
231 { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
232 { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
233 { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
234 { USB_DEVICE(0x0cf3, 0x817b), .driver_info = BTUSB_ATH3012 },
235 { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
236 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
237 { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
238 { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
239 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
240 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
241 { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
242 { USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 },
243 { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
244 { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
245 { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
246 { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
247 { USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
248 { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
249 { USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
250 { USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 },
251
252 /* Atheros AR5BBU12 with sflash firmware */
253 { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
254
255 /* Atheros AR5BBU12 with sflash firmware */
256 { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
257 { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
258
259 /* QCA ROME chipset */
260 { USB_DEVICE(0x0cf3, 0x535b), .driver_info = BTUSB_QCA_ROME |
261 BTUSB_WIDEBAND_SPEECH },
262 { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME |
263 BTUSB_WIDEBAND_SPEECH },
264 { USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME |
265 BTUSB_WIDEBAND_SPEECH },
266 { USB_DEVICE(0x0cf3, 0xe010), .driver_info = BTUSB_QCA_ROME |
267 BTUSB_WIDEBAND_SPEECH },
268 { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME |
269 BTUSB_WIDEBAND_SPEECH },
270 { USB_DEVICE(0x0cf3, 0xe301), .driver_info = BTUSB_QCA_ROME |
271 BTUSB_WIDEBAND_SPEECH },
272 { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME |
273 BTUSB_WIDEBAND_SPEECH },
274 { USB_DEVICE(0x0cf3, 0xe500), .driver_info = BTUSB_QCA_ROME |
275 BTUSB_WIDEBAND_SPEECH },
276 { USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME |
277 BTUSB_WIDEBAND_SPEECH },
278 { USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME |
279 BTUSB_WIDEBAND_SPEECH },
280 { USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME |
281 BTUSB_WIDEBAND_SPEECH },
282 { USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME |
283 BTUSB_WIDEBAND_SPEECH },
284 { USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME |
285 BTUSB_WIDEBAND_SPEECH },
286 { USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME |
287 BTUSB_WIDEBAND_SPEECH },
288 { USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME |
289 BTUSB_WIDEBAND_SPEECH },
290 { USB_DEVICE(0x04ca, 0x3021), .driver_info = BTUSB_QCA_ROME |
291 BTUSB_WIDEBAND_SPEECH },
292 { USB_DEVICE(0x13d3, 0x3491), .driver_info = BTUSB_QCA_ROME |
293 BTUSB_WIDEBAND_SPEECH },
294 { USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME |
295 BTUSB_WIDEBAND_SPEECH },
296 { USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME |
297 BTUSB_WIDEBAND_SPEECH },
298
299 /* QCA WCN6855 chipset */
300 { USB_DEVICE(0x0cf3, 0xe600), .driver_info = BTUSB_QCA_WCN6855 |
301 BTUSB_WIDEBAND_SPEECH |
302 BTUSB_VALID_LE_STATES },
303 { USB_DEVICE(0x0489, 0xe0cc), .driver_info = BTUSB_QCA_WCN6855 |
304 BTUSB_WIDEBAND_SPEECH |
305 BTUSB_VALID_LE_STATES },
306 { USB_DEVICE(0x0489, 0xe0d6), .driver_info = BTUSB_QCA_WCN6855 |
307 BTUSB_WIDEBAND_SPEECH |
308 BTUSB_VALID_LE_STATES },
309 { USB_DEVICE(0x0489, 0xe0e3), .driver_info = BTUSB_QCA_WCN6855 |
310 BTUSB_WIDEBAND_SPEECH |
311 BTUSB_VALID_LE_STATES },
312 { USB_DEVICE(0x10ab, 0x9309), .driver_info = BTUSB_QCA_WCN6855 |
313 BTUSB_WIDEBAND_SPEECH |
314 BTUSB_VALID_LE_STATES },
315 { USB_DEVICE(0x10ab, 0x9409), .driver_info = BTUSB_QCA_WCN6855 |
316 BTUSB_WIDEBAND_SPEECH |
317 BTUSB_VALID_LE_STATES },
318 { USB_DEVICE(0x0489, 0xe0d0), .driver_info = BTUSB_QCA_WCN6855 |
319 BTUSB_WIDEBAND_SPEECH |
320 BTUSB_VALID_LE_STATES },
321 { USB_DEVICE(0x10ab, 0x9108), .driver_info = BTUSB_QCA_WCN6855 |
322 BTUSB_WIDEBAND_SPEECH |
323 BTUSB_VALID_LE_STATES },
324 { USB_DEVICE(0x10ab, 0x9109), .driver_info = BTUSB_QCA_WCN6855 |
325 BTUSB_WIDEBAND_SPEECH |
326 BTUSB_VALID_LE_STATES },
327 { USB_DEVICE(0x10ab, 0x9208), .driver_info = BTUSB_QCA_WCN6855 |
328 BTUSB_WIDEBAND_SPEECH |
329 BTUSB_VALID_LE_STATES },
330 { USB_DEVICE(0x10ab, 0x9209), .driver_info = BTUSB_QCA_WCN6855 |
331 BTUSB_WIDEBAND_SPEECH |
332 BTUSB_VALID_LE_STATES },
333 { USB_DEVICE(0x10ab, 0x9308), .driver_info = BTUSB_QCA_WCN6855 |
334 BTUSB_WIDEBAND_SPEECH |
335 BTUSB_VALID_LE_STATES },
336 { USB_DEVICE(0x10ab, 0x9408), .driver_info = BTUSB_QCA_WCN6855 |
337 BTUSB_WIDEBAND_SPEECH |
338 BTUSB_VALID_LE_STATES },
339 { USB_DEVICE(0x10ab, 0x9508), .driver_info = BTUSB_QCA_WCN6855 |
340 BTUSB_WIDEBAND_SPEECH |
341 BTUSB_VALID_LE_STATES },
342 { USB_DEVICE(0x10ab, 0x9509), .driver_info = BTUSB_QCA_WCN6855 |
343 BTUSB_WIDEBAND_SPEECH |
344 BTUSB_VALID_LE_STATES },
345 { USB_DEVICE(0x10ab, 0x9608), .driver_info = BTUSB_QCA_WCN6855 |
346 BTUSB_WIDEBAND_SPEECH |
347 BTUSB_VALID_LE_STATES },
348 { USB_DEVICE(0x10ab, 0x9609), .driver_info = BTUSB_QCA_WCN6855 |
349 BTUSB_WIDEBAND_SPEECH |
350 BTUSB_VALID_LE_STATES },
351 { USB_DEVICE(0x10ab, 0x9f09), .driver_info = BTUSB_QCA_WCN6855 |
352 BTUSB_WIDEBAND_SPEECH |
353 BTUSB_VALID_LE_STATES },
354 { USB_DEVICE(0x04ca, 0x3022), .driver_info = BTUSB_QCA_WCN6855 |
355 BTUSB_WIDEBAND_SPEECH |
356 BTUSB_VALID_LE_STATES },
357 { USB_DEVICE(0x0489, 0xe0c7), .driver_info = BTUSB_QCA_WCN6855 |
358 BTUSB_WIDEBAND_SPEECH |
359 BTUSB_VALID_LE_STATES },
360 { USB_DEVICE(0x0489, 0xe0c9), .driver_info = BTUSB_QCA_WCN6855 |
361 BTUSB_WIDEBAND_SPEECH |
362 BTUSB_VALID_LE_STATES },
363 { USB_DEVICE(0x0489, 0xe0ca), .driver_info = BTUSB_QCA_WCN6855 |
364 BTUSB_WIDEBAND_SPEECH |
365 BTUSB_VALID_LE_STATES },
366 { USB_DEVICE(0x0489, 0xe0cb), .driver_info = BTUSB_QCA_WCN6855 |
367 BTUSB_WIDEBAND_SPEECH |
368 BTUSB_VALID_LE_STATES },
369 { USB_DEVICE(0x0489, 0xe0ce), .driver_info = BTUSB_QCA_WCN6855 |
370 BTUSB_WIDEBAND_SPEECH |
371 BTUSB_VALID_LE_STATES },
372 { USB_DEVICE(0x0489, 0xe0de), .driver_info = BTUSB_QCA_WCN6855 |
373 BTUSB_WIDEBAND_SPEECH |
374 BTUSB_VALID_LE_STATES },
375 { USB_DEVICE(0x0489, 0xe0df), .driver_info = BTUSB_QCA_WCN6855 |
376 BTUSB_WIDEBAND_SPEECH |
377 BTUSB_VALID_LE_STATES },
378 { USB_DEVICE(0x0489, 0xe0e1), .driver_info = BTUSB_QCA_WCN6855 |
379 BTUSB_WIDEBAND_SPEECH |
380 BTUSB_VALID_LE_STATES },
381 { USB_DEVICE(0x0489, 0xe0ea), .driver_info = BTUSB_QCA_WCN6855 |
382 BTUSB_WIDEBAND_SPEECH |
383 BTUSB_VALID_LE_STATES },
384 { USB_DEVICE(0x0489, 0xe0ec), .driver_info = BTUSB_QCA_WCN6855 |
385 BTUSB_WIDEBAND_SPEECH |
386 BTUSB_VALID_LE_STATES },
387 { USB_DEVICE(0x04ca, 0x3023), .driver_info = BTUSB_QCA_WCN6855 |
388 BTUSB_WIDEBAND_SPEECH |
389 BTUSB_VALID_LE_STATES },
390 { USB_DEVICE(0x04ca, 0x3024), .driver_info = BTUSB_QCA_WCN6855 |
391 BTUSB_WIDEBAND_SPEECH |
392 BTUSB_VALID_LE_STATES },
393 { USB_DEVICE(0x04ca, 0x3a22), .driver_info = BTUSB_QCA_WCN6855 |
394 BTUSB_WIDEBAND_SPEECH |
395 BTUSB_VALID_LE_STATES },
396 { USB_DEVICE(0x04ca, 0x3a24), .driver_info = BTUSB_QCA_WCN6855 |
397 BTUSB_WIDEBAND_SPEECH |
398 BTUSB_VALID_LE_STATES },
399 { USB_DEVICE(0x04ca, 0x3a26), .driver_info = BTUSB_QCA_WCN6855 |
400 BTUSB_WIDEBAND_SPEECH |
401 BTUSB_VALID_LE_STATES },
402 { USB_DEVICE(0x04ca, 0x3a27), .driver_info = BTUSB_QCA_WCN6855 |
403 BTUSB_WIDEBAND_SPEECH |
404 BTUSB_VALID_LE_STATES },
405
406 /* QCA WCN785x chipset */
407 { USB_DEVICE(0x0cf3, 0xe700), .driver_info = BTUSB_QCA_WCN6855 |
408 BTUSB_WIDEBAND_SPEECH |
409 BTUSB_VALID_LE_STATES },
410
411 /* Broadcom BCM2035 */
412 { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
413 { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
414 { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
415
416 /* Broadcom BCM2045 */
417 { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU },
418 { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU },
419
420 /* IBM/Lenovo ThinkPad with Broadcom chip */
421 { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU },
422 { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU },
423
424 /* HP laptop with Broadcom chip */
425 { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU },
426
427 /* Dell laptop with Broadcom chip */
428 { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU },
429
430 /* Dell Wireless 370 and 410 devices */
431 { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU },
432 { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU },
433
434 /* Belkin F8T012 and F8T013 devices */
435 { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU },
436 { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU },
437
438 /* Asus WL-BTD202 device */
439 { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU },
440
441 /* Kensington Bluetooth USB adapter */
442 { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU },
443
444 /* RTX Telecom based adapters with buggy SCO support */
445 { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
446 { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },
447
448 /* CONWISE Technology based adapters with buggy SCO support */
449 { USB_DEVICE(0x0e5e, 0x6622),
450 .driver_info = BTUSB_BROKEN_ISOC | BTUSB_CW6622},
451
452 /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
453 { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },
454
455 /* Digianswer devices */
456 { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
457 { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
458
459 /* CSR BlueCore Bluetooth Sniffer */
460 { USB_DEVICE(0x0a12, 0x0002),
461 .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
462
463 /* Frontline ComProbe Bluetooth Sniffer */
464 { USB_DEVICE(0x16d3, 0x0002),
465 .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
466
467 /* Marvell Bluetooth devices */
468 { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
469 { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },
470 { USB_DEVICE(0x1286, 0x204e), .driver_info = BTUSB_MARVELL },
471
472 /* Intel Bluetooth devices */
473 { USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_COMBINED },
474 { USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_COMBINED },
475 { USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_COMBINED },
476 { USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_COMBINED },
477 { USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED },
478 { USB_DEVICE(0x8087, 0x0035), .driver_info = BTUSB_INTEL_COMBINED },
479 { USB_DEVICE(0x8087, 0x0036), .driver_info = BTUSB_INTEL_COMBINED },
480 { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
481 { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
482 { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
483 BTUSB_INTEL_NO_WBS_SUPPORT |
484 BTUSB_INTEL_BROKEN_INITIAL_NCMD |
485 BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
486 { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED |
487 BTUSB_INTEL_NO_WBS_SUPPORT |
488 BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
489 { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED },
490 { USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED |
491 BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
492 { USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_COMBINED },
493
494 /* Other Intel Bluetooth devices */
495 { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
496 .driver_info = BTUSB_IGNORE },
497
498 /* Realtek 8821CE Bluetooth devices */
499 { USB_DEVICE(0x13d3, 0x3529), .driver_info = BTUSB_REALTEK |
500 BTUSB_WIDEBAND_SPEECH },
501
502 /* Realtek 8822CE Bluetooth devices */
503 { USB_DEVICE(0x0bda, 0xb00c), .driver_info = BTUSB_REALTEK |
504 BTUSB_WIDEBAND_SPEECH },
505 { USB_DEVICE(0x0bda, 0xc822), .driver_info = BTUSB_REALTEK |
506 BTUSB_WIDEBAND_SPEECH },
507
508 /* Realtek 8822CU Bluetooth devices */
509 { USB_DEVICE(0x13d3, 0x3549), .driver_info = BTUSB_REALTEK |
510 BTUSB_WIDEBAND_SPEECH },
511
512 /* Realtek 8852AE Bluetooth devices */
513 { USB_DEVICE(0x0bda, 0x2852), .driver_info = BTUSB_REALTEK |
514 BTUSB_WIDEBAND_SPEECH },
515 { USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK |
516 BTUSB_WIDEBAND_SPEECH },
517 { USB_DEVICE(0x0bda, 0x385a), .driver_info = BTUSB_REALTEK |
518 BTUSB_WIDEBAND_SPEECH },
519 { USB_DEVICE(0x0bda, 0x4852), .driver_info = BTUSB_REALTEK |
520 BTUSB_WIDEBAND_SPEECH },
521 { USB_DEVICE(0x04c5, 0x165c), .driver_info = BTUSB_REALTEK |
522 BTUSB_WIDEBAND_SPEECH },
523 { USB_DEVICE(0x04ca, 0x4006), .driver_info = BTUSB_REALTEK |
524 BTUSB_WIDEBAND_SPEECH },
525 { USB_DEVICE(0x0cb8, 0xc549), .driver_info = BTUSB_REALTEK |
526 BTUSB_WIDEBAND_SPEECH },
527
528 /* Realtek 8852CE Bluetooth devices */
529 { USB_DEVICE(0x04ca, 0x4007), .driver_info = BTUSB_REALTEK |
530 BTUSB_WIDEBAND_SPEECH },
531 { USB_DEVICE(0x04c5, 0x1675), .driver_info = BTUSB_REALTEK |
532 BTUSB_WIDEBAND_SPEECH },
533 { USB_DEVICE(0x0cb8, 0xc558), .driver_info = BTUSB_REALTEK |
534 BTUSB_WIDEBAND_SPEECH },
535 { USB_DEVICE(0x13d3, 0x3587), .driver_info = BTUSB_REALTEK |
536 BTUSB_WIDEBAND_SPEECH },
537 { USB_DEVICE(0x13d3, 0x3586), .driver_info = BTUSB_REALTEK |
538 BTUSB_WIDEBAND_SPEECH },
539 { USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK |
540 BTUSB_WIDEBAND_SPEECH },
541
542 /* Realtek 8852BE Bluetooth devices */
543 { USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK |
544 BTUSB_WIDEBAND_SPEECH },
545 { USB_DEVICE(0x0bda, 0x887b), .driver_info = BTUSB_REALTEK |
546 BTUSB_WIDEBAND_SPEECH },
547 { USB_DEVICE(0x0bda, 0xb85b), .driver_info = BTUSB_REALTEK |
548 BTUSB_WIDEBAND_SPEECH },
549 { USB_DEVICE(0x13d3, 0x3570), .driver_info = BTUSB_REALTEK |
550 BTUSB_WIDEBAND_SPEECH },
551 { USB_DEVICE(0x13d3, 0x3571), .driver_info = BTUSB_REALTEK |
552 BTUSB_WIDEBAND_SPEECH },
553 { USB_DEVICE(0x13d3, 0x3572), .driver_info = BTUSB_REALTEK |
554 BTUSB_WIDEBAND_SPEECH },
555
556 /* Realtek Bluetooth devices */
557 { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
558 .driver_info = BTUSB_REALTEK },
559
560 /* MediaTek Bluetooth devices */
561 { USB_VENDOR_AND_INTERFACE_INFO(0x0e8d, 0xe0, 0x01, 0x01),
562 .driver_info = BTUSB_MEDIATEK |
563 BTUSB_WIDEBAND_SPEECH |
564 BTUSB_VALID_LE_STATES },
565
566 /* Additional MediaTek MT7615E Bluetooth devices */
567 { USB_DEVICE(0x13d3, 0x3560), .driver_info = BTUSB_MEDIATEK},
568
569 /* Additional MediaTek MT7663 Bluetooth devices */
570 { USB_DEVICE(0x043e, 0x310c), .driver_info = BTUSB_MEDIATEK |
571 BTUSB_WIDEBAND_SPEECH |
572 BTUSB_VALID_LE_STATES },
573 { USB_DEVICE(0x04ca, 0x3801), .driver_info = BTUSB_MEDIATEK |
574 BTUSB_WIDEBAND_SPEECH |
575 BTUSB_VALID_LE_STATES },
576
577 /* Additional MediaTek MT7668 Bluetooth devices */
578 { USB_DEVICE(0x043e, 0x3109), .driver_info = BTUSB_MEDIATEK |
579 BTUSB_WIDEBAND_SPEECH |
580 BTUSB_VALID_LE_STATES },
581
582 /* Additional MediaTek MT7921 Bluetooth devices */
583 { USB_DEVICE(0x0489, 0xe0c8), .driver_info = BTUSB_MEDIATEK |
584 BTUSB_WIDEBAND_SPEECH |
585 BTUSB_VALID_LE_STATES },
586 { USB_DEVICE(0x0489, 0xe0e0), .driver_info = BTUSB_MEDIATEK |
587 BTUSB_WIDEBAND_SPEECH |
588 BTUSB_VALID_LE_STATES },
589 { USB_DEVICE(0x0489, 0xe0f2), .driver_info = BTUSB_MEDIATEK |
590 BTUSB_WIDEBAND_SPEECH |
591 BTUSB_VALID_LE_STATES },
592 { USB_DEVICE(0x04ca, 0x3802), .driver_info = BTUSB_MEDIATEK |
593 BTUSB_WIDEBAND_SPEECH |
594 BTUSB_VALID_LE_STATES },
595 { USB_DEVICE(0x13d3, 0x3563), .driver_info = BTUSB_MEDIATEK |
596 BTUSB_WIDEBAND_SPEECH |
597 BTUSB_VALID_LE_STATES },
598 { USB_DEVICE(0x13d3, 0x3564), .driver_info = BTUSB_MEDIATEK |
599 BTUSB_WIDEBAND_SPEECH |
600 BTUSB_VALID_LE_STATES },
601 { USB_DEVICE(0x13d3, 0x3567), .driver_info = BTUSB_MEDIATEK |
602 BTUSB_WIDEBAND_SPEECH |
603 BTUSB_VALID_LE_STATES },
604 { USB_DEVICE(0x13d3, 0x3578), .driver_info = BTUSB_MEDIATEK |
605 BTUSB_WIDEBAND_SPEECH |
606 BTUSB_VALID_LE_STATES },
607 { USB_DEVICE(0x13d3, 0x3583), .driver_info = BTUSB_MEDIATEK |
608 BTUSB_WIDEBAND_SPEECH |
609 BTUSB_VALID_LE_STATES },
610 { USB_DEVICE(0x0489, 0xe0cd), .driver_info = BTUSB_MEDIATEK |
611 BTUSB_WIDEBAND_SPEECH |
612 BTUSB_VALID_LE_STATES },
613 { USB_DEVICE(0x0e8d, 0x0608), .driver_info = BTUSB_MEDIATEK |
614 BTUSB_WIDEBAND_SPEECH |
615 BTUSB_VALID_LE_STATES },
616
617 /* MediaTek MT7922A Bluetooth devices */
618 { USB_DEVICE(0x0489, 0xe0d8), .driver_info = BTUSB_MEDIATEK |
619 BTUSB_WIDEBAND_SPEECH |
620 BTUSB_VALID_LE_STATES },
621 { USB_DEVICE(0x0489, 0xe0d9), .driver_info = BTUSB_MEDIATEK |
622 BTUSB_WIDEBAND_SPEECH |
623 BTUSB_VALID_LE_STATES },
624 { USB_DEVICE(0x0489, 0xe0f5), .driver_info = BTUSB_MEDIATEK |
625 BTUSB_WIDEBAND_SPEECH |
626 BTUSB_VALID_LE_STATES },
627 { USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK |
628 BTUSB_WIDEBAND_SPEECH |
629 BTUSB_VALID_LE_STATES },
630 { USB_DEVICE(0x0489, 0xe0e2), .driver_info = BTUSB_MEDIATEK |
631 BTUSB_WIDEBAND_SPEECH |
632 BTUSB_VALID_LE_STATES },
633 { USB_DEVICE(0x0489, 0xe0e4), .driver_info = BTUSB_MEDIATEK |
634 BTUSB_WIDEBAND_SPEECH |
635 BTUSB_VALID_LE_STATES },
636 { USB_DEVICE(0x0489, 0xe0f1), .driver_info = BTUSB_MEDIATEK |
637 BTUSB_WIDEBAND_SPEECH |
638 BTUSB_VALID_LE_STATES },
639 { USB_DEVICE(0x0489, 0xe0f2), .driver_info = BTUSB_MEDIATEK |
640 BTUSB_WIDEBAND_SPEECH |
641 BTUSB_VALID_LE_STATES },
642 { USB_DEVICE(0x0489, 0xe0f5), .driver_info = BTUSB_MEDIATEK |
643 BTUSB_WIDEBAND_SPEECH |
644 BTUSB_VALID_LE_STATES },
645 { USB_DEVICE(0x0489, 0xe0f6), .driver_info = BTUSB_MEDIATEK |
646 BTUSB_WIDEBAND_SPEECH |
647 BTUSB_VALID_LE_STATES },
648 { USB_DEVICE(0x0489, 0xe102), .driver_info = BTUSB_MEDIATEK |
649 BTUSB_WIDEBAND_SPEECH |
650 BTUSB_VALID_LE_STATES },
651 { USB_DEVICE(0x04ca, 0x3804), .driver_info = BTUSB_MEDIATEK |
652 BTUSB_WIDEBAND_SPEECH |
653 BTUSB_VALID_LE_STATES },
654 { USB_DEVICE(0x35f5, 0x7922), .driver_info = BTUSB_MEDIATEK |
655 BTUSB_WIDEBAND_SPEECH |
656 BTUSB_VALID_LE_STATES },
657
658 /* Additional Realtek 8723AE Bluetooth devices */
659 { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
660 { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
661
662 /* Additional Realtek 8723BE Bluetooth devices */
663 { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK },
664 { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK },
665 { USB_DEVICE(0x04f2, 0xb49f), .driver_info = BTUSB_REALTEK },
666 { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK },
667 { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK },
668 { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
669 { USB_DEVICE(0x13d3, 0x3494), .driver_info = BTUSB_REALTEK },
670
671 /* Additional Realtek 8723BU Bluetooth devices */
672 { USB_DEVICE(0x7392, 0xa611), .driver_info = BTUSB_REALTEK },
673
674 /* Additional Realtek 8723DE Bluetooth devices */
675 { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK },
676 { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
677
678 /* Additional Realtek 8761BUV Bluetooth devices */
679 { USB_DEVICE(0x2357, 0x0604), .driver_info = BTUSB_REALTEK |
680 BTUSB_WIDEBAND_SPEECH },
681 { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
682 BTUSB_WIDEBAND_SPEECH },
683 { USB_DEVICE(0x2550, 0x8761), .driver_info = BTUSB_REALTEK |
684 BTUSB_WIDEBAND_SPEECH },
685 { USB_DEVICE(0x0bda, 0x8771), .driver_info = BTUSB_REALTEK |
686 BTUSB_WIDEBAND_SPEECH },
687 { USB_DEVICE(0x6655, 0x8771), .driver_info = BTUSB_REALTEK |
688 BTUSB_WIDEBAND_SPEECH },
689 { USB_DEVICE(0x7392, 0xc611), .driver_info = BTUSB_REALTEK |
690 BTUSB_WIDEBAND_SPEECH },
691 { USB_DEVICE(0x2b89, 0x8761), .driver_info = BTUSB_REALTEK |
692 BTUSB_WIDEBAND_SPEECH },
693
694 /* Additional Realtek 8821AE Bluetooth devices */
695 { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
696 { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
697 { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK },
698 { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
699 { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
700
701 /* Additional Realtek 8822BE Bluetooth devices */
702 { USB_DEVICE(0x13d3, 0x3526), .driver_info = BTUSB_REALTEK },
703 { USB_DEVICE(0x0b05, 0x185c), .driver_info = BTUSB_REALTEK },
704
705 /* Additional Realtek 8822CE Bluetooth devices */
706 { USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK |
707 BTUSB_WIDEBAND_SPEECH },
708 { USB_DEVICE(0x04c5, 0x161f), .driver_info = BTUSB_REALTEK |
709 BTUSB_WIDEBAND_SPEECH },
710 { USB_DEVICE(0x0b05, 0x18ef), .driver_info = BTUSB_REALTEK |
711 BTUSB_WIDEBAND_SPEECH },
712 { USB_DEVICE(0x13d3, 0x3548), .driver_info = BTUSB_REALTEK |
713 BTUSB_WIDEBAND_SPEECH },
714 { USB_DEVICE(0x13d3, 0x3549), .driver_info = BTUSB_REALTEK |
715 BTUSB_WIDEBAND_SPEECH },
716 { USB_DEVICE(0x13d3, 0x3553), .driver_info = BTUSB_REALTEK |
717 BTUSB_WIDEBAND_SPEECH },
718 { USB_DEVICE(0x13d3, 0x3555), .driver_info = BTUSB_REALTEK |
719 BTUSB_WIDEBAND_SPEECH },
720 { USB_DEVICE(0x2ff8, 0x3051), .driver_info = BTUSB_REALTEK |
721 BTUSB_WIDEBAND_SPEECH },
722 { USB_DEVICE(0x1358, 0xc123), .driver_info = BTUSB_REALTEK |
723 BTUSB_WIDEBAND_SPEECH },
724 { USB_DEVICE(0x0bda, 0xc123), .driver_info = BTUSB_REALTEK |
725 BTUSB_WIDEBAND_SPEECH },
726 { USB_DEVICE(0x0cb5, 0xc547), .driver_info = BTUSB_REALTEK |
727 BTUSB_WIDEBAND_SPEECH },
728
729 /* Actions Semiconductor ATS2851 based devices */
730 { USB_DEVICE(0x10d7, 0xb012), .driver_info = BTUSB_ACTIONS_SEMI },
731
732 /* Silicon Wave based devices */
733 { USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
734
735 { } /* Terminating entry */
736};
737
738/* The Bluetooth USB module build into some devices needs to be reset on resume,
739 * this is a problem with the platform (likely shutting off all power) not with
740 * the module itself. So we use a DMI list to match known broken platforms.
741 */
742static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
743 {
744 /* Dell OptiPlex 3060 (QCA ROME device 0cf3:e007) */
745 .matches = {
746 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
747 DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 3060"),
748 },
749 },
750 {
751 /* Dell XPS 9360 (QCA ROME device 0cf3:e300) */
752 .matches = {
753 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
754 DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9360"),
755 },
756 },
757 {
758 /* Dell Inspiron 5565 (QCA ROME device 0cf3:e009) */
759 .matches = {
760 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
761 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5565"),
762 },
763 },
764 {}
765};
766
767struct qca_dump_info {
768 /* fields for dump collection */
769 u16 id_vendor;
770 u16 id_product;
771 u32 fw_version;
772 u32 controller_id;
773 u32 ram_dump_size;
774 u16 ram_dump_seqno;
775};
776
777#define BTUSB_MAX_ISOC_FRAMES 10
778
779#define BTUSB_INTR_RUNNING 0
780#define BTUSB_BULK_RUNNING 1
781#define BTUSB_ISOC_RUNNING 2
782#define BTUSB_SUSPENDING 3
783#define BTUSB_DID_ISO_RESUME 4
784#define BTUSB_BOOTLOADER 5
785#define BTUSB_DOWNLOADING 6
786#define BTUSB_FIRMWARE_LOADED 7
787#define BTUSB_FIRMWARE_FAILED 8
788#define BTUSB_BOOTING 9
789#define BTUSB_DIAG_RUNNING 10
790#define BTUSB_OOB_WAKE_ENABLED 11
791#define BTUSB_HW_RESET_ACTIVE 12
792#define BTUSB_TX_WAIT_VND_EVT 13
793#define BTUSB_WAKEUP_AUTOSUSPEND 14
794#define BTUSB_USE_ALT3_FOR_WBS 15
795#define BTUSB_ALT6_CONTINUOUS_TX 16
796#define BTUSB_HW_SSR_ACTIVE 17
797
798struct btusb_data {
799 struct hci_dev *hdev;
800 struct usb_device *udev;
801 struct usb_interface *intf;
802 struct usb_interface *isoc;
803 struct usb_interface *diag;
804 unsigned isoc_ifnum;
805
806 unsigned long flags;
807
808 bool poll_sync;
809 int intr_interval;
810 struct work_struct work;
811 struct work_struct waker;
812 struct delayed_work rx_work;
813
814 struct sk_buff_head acl_q;
815
816 struct usb_anchor deferred;
817 struct usb_anchor tx_anchor;
818 int tx_in_flight;
819 spinlock_t txlock;
820
821 struct usb_anchor intr_anchor;
822 struct usb_anchor bulk_anchor;
823 struct usb_anchor isoc_anchor;
824 struct usb_anchor diag_anchor;
825 struct usb_anchor ctrl_anchor;
826 spinlock_t rxlock;
827
828 struct sk_buff *evt_skb;
829 struct sk_buff *acl_skb;
830 struct sk_buff *sco_skb;
831
832 struct usb_endpoint_descriptor *intr_ep;
833 struct usb_endpoint_descriptor *bulk_tx_ep;
834 struct usb_endpoint_descriptor *bulk_rx_ep;
835 struct usb_endpoint_descriptor *isoc_tx_ep;
836 struct usb_endpoint_descriptor *isoc_rx_ep;
837 struct usb_endpoint_descriptor *diag_tx_ep;
838 struct usb_endpoint_descriptor *diag_rx_ep;
839
840 struct gpio_desc *reset_gpio;
841
842 __u8 cmdreq_type;
843 __u8 cmdreq;
844
845 unsigned int sco_num;
846 unsigned int air_mode;
847 bool usb_alt6_packet_flow;
848 int isoc_altsetting;
849 int suspend_count;
850
851 int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
852 int (*recv_acl)(struct hci_dev *hdev, struct sk_buff *skb);
853 int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
854
855 int (*setup_on_usb)(struct hci_dev *hdev);
856
857 int oob_wake_irq; /* irq for out-of-band wake-on-bt */
858 unsigned cmd_timeout_cnt;
859
860 struct qca_dump_info qca_dump;
861};
862
863static void btusb_reset(struct hci_dev *hdev)
864{
865 struct btusb_data *data;
866 int err;
867
868 if (hdev->reset) {
869 hdev->reset(hdev);
870 return;
871 }
872
873 data = hci_get_drvdata(hdev);
874 /* This is not an unbalanced PM reference since the device will reset */
875 err = usb_autopm_get_interface(data->intf);
876 if (err) {
877 bt_dev_err(hdev, "Failed usb_autopm_get_interface: %d", err);
878 return;
879 }
880
881 bt_dev_err(hdev, "Resetting usb device.");
882 usb_queue_reset_device(data->intf);
883}
884
885static void btusb_intel_cmd_timeout(struct hci_dev *hdev)
886{
887 struct btusb_data *data = hci_get_drvdata(hdev);
888 struct gpio_desc *reset_gpio = data->reset_gpio;
889 struct btintel_data *intel_data = hci_get_priv(hdev);
890
891 if (++data->cmd_timeout_cnt < 5)
892 return;
893
894 if (intel_data->acpi_reset_method) {
895 if (test_and_set_bit(INTEL_ACPI_RESET_ACTIVE, intel_data->flags)) {
896 bt_dev_err(hdev, "acpi: last reset failed ? Not resetting again");
897 return;
898 }
899
900 bt_dev_err(hdev, "Initiating acpi reset method");
901 /* If ACPI reset method fails, lets try with legacy GPIO
902 * toggling
903 */
904 if (!intel_data->acpi_reset_method(hdev)) {
905 return;
906 }
907 }
908
909 if (!reset_gpio) {
910 btusb_reset(hdev);
911 return;
912 }
913
914 /*
915 * Toggle the hard reset line if the platform provides one. The reset
916 * is going to yank the device off the USB and then replug. So doing
917 * once is enough. The cleanup is handled correctly on the way out
918 * (standard USB disconnect), and the new device is detected cleanly
919 * and bound to the driver again like it should be.
920 */
921 if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
922 bt_dev_err(hdev, "last reset failed? Not resetting again");
923 return;
924 }
925
926 bt_dev_err(hdev, "Initiating HW reset via gpio");
927 gpiod_set_value_cansleep(reset_gpio, 1);
928 msleep(100);
929 gpiod_set_value_cansleep(reset_gpio, 0);
930}
931
932#define RTK_DEVCOREDUMP_CODE_MEMDUMP 0x01
933#define RTK_DEVCOREDUMP_CODE_HW_ERR 0x02
934#define RTK_DEVCOREDUMP_CODE_CMD_TIMEOUT 0x03
935
936#define RTK_SUB_EVENT_CODE_COREDUMP 0x34
937
938struct rtk_dev_coredump_hdr {
939 u8 type;
940 u8 code;
941 u8 reserved[2];
942} __packed;
943
944static inline void btusb_rtl_alloc_devcoredump(struct hci_dev *hdev,
945 struct rtk_dev_coredump_hdr *hdr, u8 *buf, u32 len)
946{
947 struct sk_buff *skb;
948
949 skb = alloc_skb(len + sizeof(*hdr), GFP_ATOMIC);
950 if (!skb)
951 return;
952
953 skb_put_data(skb, hdr, sizeof(*hdr));
954 if (len)
955 skb_put_data(skb, buf, len);
956
957 if (!hci_devcd_init(hdev, skb->len)) {
958 hci_devcd_append(hdev, skb);
959 hci_devcd_complete(hdev);
960 } else {
961 bt_dev_err(hdev, "RTL: Failed to generate devcoredump");
962 kfree_skb(skb);
963 }
964}
965
966static void btusb_rtl_cmd_timeout(struct hci_dev *hdev)
967{
968 struct btusb_data *data = hci_get_drvdata(hdev);
969 struct gpio_desc *reset_gpio = data->reset_gpio;
970 struct rtk_dev_coredump_hdr hdr = {
971 .type = RTK_DEVCOREDUMP_CODE_CMD_TIMEOUT,
972 };
973
974 btusb_rtl_alloc_devcoredump(hdev, &hdr, NULL, 0);
975
976 if (++data->cmd_timeout_cnt < 5)
977 return;
978
979 if (!reset_gpio) {
980 btusb_reset(hdev);
981 return;
982 }
983
984 /* Toggle the hard reset line. The Realtek device is going to
985 * yank itself off the USB and then replug. The cleanup is handled
986 * correctly on the way out (standard USB disconnect), and the new
987 * device is detected cleanly and bound to the driver again like
988 * it should be.
989 */
990 if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
991 bt_dev_err(hdev, "last reset failed? Not resetting again");
992 return;
993 }
994
995 bt_dev_err(hdev, "Reset Realtek device via gpio");
996 gpiod_set_value_cansleep(reset_gpio, 1);
997 msleep(200);
998 gpiod_set_value_cansleep(reset_gpio, 0);
999}
1000
1001static void btusb_rtl_hw_error(struct hci_dev *hdev, u8 code)
1002{
1003 struct rtk_dev_coredump_hdr hdr = {
1004 .type = RTK_DEVCOREDUMP_CODE_HW_ERR,
1005 .code = code,
1006 };
1007
1008 bt_dev_err(hdev, "RTL: hw err, trigger devcoredump (%d)", code);
1009
1010 btusb_rtl_alloc_devcoredump(hdev, &hdr, NULL, 0);
1011}
1012
1013static void btusb_qca_cmd_timeout(struct hci_dev *hdev)
1014{
1015 struct btusb_data *data = hci_get_drvdata(hdev);
1016 struct gpio_desc *reset_gpio = data->reset_gpio;
1017
1018 if (test_bit(BTUSB_HW_SSR_ACTIVE, &data->flags)) {
1019 bt_dev_info(hdev, "Ramdump in progress, defer cmd_timeout");
1020 return;
1021 }
1022
1023 if (++data->cmd_timeout_cnt < 5)
1024 return;
1025
1026 if (reset_gpio) {
1027 bt_dev_err(hdev, "Reset qca device via bt_en gpio");
1028
1029 /* Toggle the hard reset line. The qca bt device is going to
1030 * yank itself off the USB and then replug. The cleanup is handled
1031 * correctly on the way out (standard USB disconnect), and the new
1032 * device is detected cleanly and bound to the driver again like
1033 * it should be.
1034 */
1035 if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
1036 bt_dev_err(hdev, "last reset failed? Not resetting again");
1037 return;
1038 }
1039
1040 gpiod_set_value_cansleep(reset_gpio, 0);
1041 msleep(200);
1042 gpiod_set_value_cansleep(reset_gpio, 1);
1043
1044 return;
1045 }
1046
1047 btusb_reset(hdev);
1048}
1049
1050static inline void btusb_free_frags(struct btusb_data *data)
1051{
1052 unsigned long flags;
1053
1054 spin_lock_irqsave(&data->rxlock, flags);
1055
1056 dev_kfree_skb_irq(data->evt_skb);
1057 data->evt_skb = NULL;
1058
1059 dev_kfree_skb_irq(data->acl_skb);
1060 data->acl_skb = NULL;
1061
1062 dev_kfree_skb_irq(data->sco_skb);
1063 data->sco_skb = NULL;
1064
1065 spin_unlock_irqrestore(&data->rxlock, flags);
1066}
1067
1068static int btusb_recv_event(struct btusb_data *data, struct sk_buff *skb)
1069{
1070 if (data->intr_interval) {
1071 /* Trigger dequeue immediatelly if an event is received */
1072 schedule_delayed_work(&data->rx_work, 0);
1073 }
1074
1075 return data->recv_event(data->hdev, skb);
1076}
1077
1078static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
1079{
1080 struct sk_buff *skb;
1081 unsigned long flags;
1082 int err = 0;
1083
1084 spin_lock_irqsave(&data->rxlock, flags);
1085 skb = data->evt_skb;
1086
1087 while (count) {
1088 int len;
1089
1090 if (!skb) {
1091 skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC);
1092 if (!skb) {
1093 err = -ENOMEM;
1094 break;
1095 }
1096
1097 hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
1098 hci_skb_expect(skb) = HCI_EVENT_HDR_SIZE;
1099 }
1100
1101 len = min_t(uint, hci_skb_expect(skb), count);
1102 skb_put_data(skb, buffer, len);
1103
1104 count -= len;
1105 buffer += len;
1106 hci_skb_expect(skb) -= len;
1107
1108 if (skb->len == HCI_EVENT_HDR_SIZE) {
1109 /* Complete event header */
1110 hci_skb_expect(skb) = hci_event_hdr(skb)->plen;
1111
1112 if (skb_tailroom(skb) < hci_skb_expect(skb)) {
1113 kfree_skb(skb);
1114 skb = NULL;
1115
1116 err = -EILSEQ;
1117 break;
1118 }
1119 }
1120
1121 if (!hci_skb_expect(skb)) {
1122 /* Complete frame */
1123 btusb_recv_event(data, skb);
1124 skb = NULL;
1125 }
1126 }
1127
1128 data->evt_skb = skb;
1129 spin_unlock_irqrestore(&data->rxlock, flags);
1130
1131 return err;
1132}
1133
1134static int btusb_recv_acl(struct btusb_data *data, struct sk_buff *skb)
1135{
1136 /* Only queue ACL packet if intr_interval is set as it means
1137 * force_poll_sync has been enabled.
1138 */
1139 if (!data->intr_interval)
1140 return data->recv_acl(data->hdev, skb);
1141
1142 skb_queue_tail(&data->acl_q, skb);
1143 schedule_delayed_work(&data->rx_work, data->intr_interval);
1144
1145 return 0;
1146}
1147
1148static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
1149{
1150 struct sk_buff *skb;
1151 unsigned long flags;
1152 int err = 0;
1153
1154 spin_lock_irqsave(&data->rxlock, flags);
1155 skb = data->acl_skb;
1156
1157 while (count) {
1158 int len;
1159
1160 if (!skb) {
1161 skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
1162 if (!skb) {
1163 err = -ENOMEM;
1164 break;
1165 }
1166
1167 hci_skb_pkt_type(skb) = HCI_ACLDATA_PKT;
1168 hci_skb_expect(skb) = HCI_ACL_HDR_SIZE;
1169 }
1170
1171 len = min_t(uint, hci_skb_expect(skb), count);
1172 skb_put_data(skb, buffer, len);
1173
1174 count -= len;
1175 buffer += len;
1176 hci_skb_expect(skb) -= len;
1177
1178 if (skb->len == HCI_ACL_HDR_SIZE) {
1179 __le16 dlen = hci_acl_hdr(skb)->dlen;
1180
1181 /* Complete ACL header */
1182 hci_skb_expect(skb) = __le16_to_cpu(dlen);
1183
1184 if (skb_tailroom(skb) < hci_skb_expect(skb)) {
1185 kfree_skb(skb);
1186 skb = NULL;
1187
1188 err = -EILSEQ;
1189 break;
1190 }
1191 }
1192
1193 if (!hci_skb_expect(skb)) {
1194 /* Complete frame */
1195 btusb_recv_acl(data, skb);
1196 skb = NULL;
1197 }
1198 }
1199
1200 data->acl_skb = skb;
1201 spin_unlock_irqrestore(&data->rxlock, flags);
1202
1203 return err;
1204}
1205
1206static bool btusb_validate_sco_handle(struct hci_dev *hdev,
1207 struct hci_sco_hdr *hdr)
1208{
1209 __u16 handle;
1210
1211 if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL))
1212 // Can't validate, userspace controls everything.
1213 return true;
1214
1215 /*
1216 * USB isochronous transfers are not designed to be reliable and may
1217 * lose fragments. When this happens, the next first fragment
1218 * encountered might actually be a continuation fragment.
1219 * Validate the handle to detect it and drop it, or else the upper
1220 * layer will get garbage for a while.
1221 */
1222
1223 handle = hci_handle(__le16_to_cpu(hdr->handle));
1224
1225 switch (hci_conn_lookup_type(hdev, handle)) {
1226 case SCO_LINK:
1227 case ESCO_LINK:
1228 return true;
1229 default:
1230 return false;
1231 }
1232}
1233
1234static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
1235{
1236 struct sk_buff *skb;
1237 unsigned long flags;
1238 int err = 0;
1239
1240 spin_lock_irqsave(&data->rxlock, flags);
1241 skb = data->sco_skb;
1242
1243 while (count) {
1244 int len;
1245
1246 if (!skb) {
1247 skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC);
1248 if (!skb) {
1249 err = -ENOMEM;
1250 break;
1251 }
1252
1253 hci_skb_pkt_type(skb) = HCI_SCODATA_PKT;
1254 hci_skb_expect(skb) = HCI_SCO_HDR_SIZE;
1255 }
1256
1257 len = min_t(uint, hci_skb_expect(skb), count);
1258 skb_put_data(skb, buffer, len);
1259
1260 count -= len;
1261 buffer += len;
1262 hci_skb_expect(skb) -= len;
1263
1264 if (skb->len == HCI_SCO_HDR_SIZE) {
1265 /* Complete SCO header */
1266 struct hci_sco_hdr *hdr = hci_sco_hdr(skb);
1267
1268 hci_skb_expect(skb) = hdr->dlen;
1269
1270 if (skb_tailroom(skb) < hci_skb_expect(skb) ||
1271 !btusb_validate_sco_handle(data->hdev, hdr)) {
1272 kfree_skb(skb);
1273 skb = NULL;
1274
1275 err = -EILSEQ;
1276 break;
1277 }
1278 }
1279
1280 if (!hci_skb_expect(skb)) {
1281 /* Complete frame */
1282 hci_recv_frame(data->hdev, skb);
1283 skb = NULL;
1284 }
1285 }
1286
1287 data->sco_skb = skb;
1288 spin_unlock_irqrestore(&data->rxlock, flags);
1289
1290 return err;
1291}
1292
1293static void btusb_intr_complete(struct urb *urb)
1294{
1295 struct hci_dev *hdev = urb->context;
1296 struct btusb_data *data = hci_get_drvdata(hdev);
1297 int err;
1298
1299 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1300 urb->actual_length);
1301
1302 if (!test_bit(HCI_RUNNING, &hdev->flags))
1303 return;
1304
1305 if (urb->status == 0) {
1306 hdev->stat.byte_rx += urb->actual_length;
1307
1308 if (btusb_recv_intr(data, urb->transfer_buffer,
1309 urb->actual_length) < 0) {
1310 bt_dev_err(hdev, "corrupted event packet");
1311 hdev->stat.err_rx++;
1312 }
1313 } else if (urb->status == -ENOENT) {
1314 /* Avoid suspend failed when usb_kill_urb */
1315 return;
1316 }
1317
1318 if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
1319 return;
1320
1321 usb_mark_last_busy(data->udev);
1322 usb_anchor_urb(urb, &data->intr_anchor);
1323
1324 err = usb_submit_urb(urb, GFP_ATOMIC);
1325 if (err < 0) {
1326 /* -EPERM: urb is being killed;
1327 * -ENODEV: device got disconnected
1328 */
1329 if (err != -EPERM && err != -ENODEV)
1330 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
1331 urb, -err);
1332 if (err != -EPERM)
1333 hci_cmd_sync_cancel(hdev, -err);
1334 usb_unanchor_urb(urb);
1335 }
1336}
1337
1338static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
1339{
1340 struct btusb_data *data = hci_get_drvdata(hdev);
1341 struct urb *urb;
1342 unsigned char *buf;
1343 unsigned int pipe;
1344 int err, size;
1345
1346 BT_DBG("%s", hdev->name);
1347
1348 if (!data->intr_ep)
1349 return -ENODEV;
1350
1351 urb = usb_alloc_urb(0, mem_flags);
1352 if (!urb)
1353 return -ENOMEM;
1354
1355 size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
1356
1357 buf = kmalloc(size, mem_flags);
1358 if (!buf) {
1359 usb_free_urb(urb);
1360 return -ENOMEM;
1361 }
1362
1363 pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress);
1364
1365 usb_fill_int_urb(urb, data->udev, pipe, buf, size,
1366 btusb_intr_complete, hdev, data->intr_ep->bInterval);
1367
1368 urb->transfer_flags |= URB_FREE_BUFFER;
1369
1370 usb_anchor_urb(urb, &data->intr_anchor);
1371
1372 err = usb_submit_urb(urb, mem_flags);
1373 if (err < 0) {
1374 if (err != -EPERM && err != -ENODEV)
1375 bt_dev_err(hdev, "urb %p submission failed (%d)",
1376 urb, -err);
1377 if (err != -EPERM)
1378 hci_cmd_sync_cancel(hdev, -err);
1379 usb_unanchor_urb(urb);
1380 }
1381
1382 /* Only initialize intr_interval if URB poll sync is enabled */
1383 if (!data->poll_sync)
1384 goto done;
1385
1386 /* The units are frames (milliseconds) for full and low speed devices,
1387 * and microframes (1/8 millisecond) for highspeed and SuperSpeed
1388 * devices.
1389 *
1390 * This is done once on open/resume so it shouldn't change even if
1391 * force_poll_sync changes.
1392 */
1393 switch (urb->dev->speed) {
1394 case USB_SPEED_SUPER_PLUS:
1395 case USB_SPEED_SUPER: /* units are 125us */
1396 data->intr_interval = usecs_to_jiffies(urb->interval * 125);
1397 break;
1398 default:
1399 data->intr_interval = msecs_to_jiffies(urb->interval);
1400 break;
1401 }
1402
1403done:
1404 usb_free_urb(urb);
1405
1406 return err;
1407}
1408
1409static void btusb_bulk_complete(struct urb *urb)
1410{
1411 struct hci_dev *hdev = urb->context;
1412 struct btusb_data *data = hci_get_drvdata(hdev);
1413 int err;
1414
1415 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1416 urb->actual_length);
1417
1418 if (!test_bit(HCI_RUNNING, &hdev->flags))
1419 return;
1420
1421 if (urb->status == 0) {
1422 hdev->stat.byte_rx += urb->actual_length;
1423
1424 if (data->recv_bulk(data, urb->transfer_buffer,
1425 urb->actual_length) < 0) {
1426 bt_dev_err(hdev, "corrupted ACL packet");
1427 hdev->stat.err_rx++;
1428 }
1429 } else if (urb->status == -ENOENT) {
1430 /* Avoid suspend failed when usb_kill_urb */
1431 return;
1432 }
1433
1434 if (!test_bit(BTUSB_BULK_RUNNING, &data->flags))
1435 return;
1436
1437 usb_anchor_urb(urb, &data->bulk_anchor);
1438 usb_mark_last_busy(data->udev);
1439
1440 err = usb_submit_urb(urb, GFP_ATOMIC);
1441 if (err < 0) {
1442 /* -EPERM: urb is being killed;
1443 * -ENODEV: device got disconnected
1444 */
1445 if (err != -EPERM && err != -ENODEV)
1446 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
1447 urb, -err);
1448 usb_unanchor_urb(urb);
1449 }
1450}
1451
1452static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
1453{
1454 struct btusb_data *data = hci_get_drvdata(hdev);
1455 struct urb *urb;
1456 unsigned char *buf;
1457 unsigned int pipe;
1458 int err, size = HCI_MAX_FRAME_SIZE;
1459
1460 BT_DBG("%s", hdev->name);
1461
1462 if (!data->bulk_rx_ep)
1463 return -ENODEV;
1464
1465 urb = usb_alloc_urb(0, mem_flags);
1466 if (!urb)
1467 return -ENOMEM;
1468
1469 buf = kmalloc(size, mem_flags);
1470 if (!buf) {
1471 usb_free_urb(urb);
1472 return -ENOMEM;
1473 }
1474
1475 pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress);
1476
1477 usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
1478 btusb_bulk_complete, hdev);
1479
1480 urb->transfer_flags |= URB_FREE_BUFFER;
1481
1482 usb_mark_last_busy(data->udev);
1483 usb_anchor_urb(urb, &data->bulk_anchor);
1484
1485 err = usb_submit_urb(urb, mem_flags);
1486 if (err < 0) {
1487 if (err != -EPERM && err != -ENODEV)
1488 bt_dev_err(hdev, "urb %p submission failed (%d)",
1489 urb, -err);
1490 usb_unanchor_urb(urb);
1491 }
1492
1493 usb_free_urb(urb);
1494
1495 return err;
1496}
1497
1498static void btusb_isoc_complete(struct urb *urb)
1499{
1500 struct hci_dev *hdev = urb->context;
1501 struct btusb_data *data = hci_get_drvdata(hdev);
1502 int i, err;
1503
1504 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1505 urb->actual_length);
1506
1507 if (!test_bit(HCI_RUNNING, &hdev->flags))
1508 return;
1509
1510 if (urb->status == 0) {
1511 for (i = 0; i < urb->number_of_packets; i++) {
1512 unsigned int offset = urb->iso_frame_desc[i].offset;
1513 unsigned int length = urb->iso_frame_desc[i].actual_length;
1514
1515 if (urb->iso_frame_desc[i].status)
1516 continue;
1517
1518 hdev->stat.byte_rx += length;
1519
1520 if (btusb_recv_isoc(data, urb->transfer_buffer + offset,
1521 length) < 0) {
1522 bt_dev_err(hdev, "corrupted SCO packet");
1523 hdev->stat.err_rx++;
1524 }
1525 }
1526 } else if (urb->status == -ENOENT) {
1527 /* Avoid suspend failed when usb_kill_urb */
1528 return;
1529 }
1530
1531 if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
1532 return;
1533
1534 usb_anchor_urb(urb, &data->isoc_anchor);
1535
1536 err = usb_submit_urb(urb, GFP_ATOMIC);
1537 if (err < 0) {
1538 /* -EPERM: urb is being killed;
1539 * -ENODEV: device got disconnected
1540 */
1541 if (err != -EPERM && err != -ENODEV)
1542 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
1543 urb, -err);
1544 usb_unanchor_urb(urb);
1545 }
1546}
1547
1548static inline void __fill_isoc_descriptor_msbc(struct urb *urb, int len,
1549 int mtu, struct btusb_data *data)
1550{
1551 int i = 0, offset = 0;
1552 unsigned int interval;
1553
1554 BT_DBG("len %d mtu %d", len, mtu);
1555
1556 /* For mSBC ALT 6 settings some chips need to transmit the data
1557 * continuously without the zero length of USB packets.
1558 */
1559 if (test_bit(BTUSB_ALT6_CONTINUOUS_TX, &data->flags))
1560 goto ignore_usb_alt6_packet_flow;
1561
1562 /* For mSBC ALT 6 setting the host will send the packet at continuous
1563 * flow. As per core spec 5, vol 4, part B, table 2.1. For ALT setting
1564 * 6 the HCI PACKET INTERVAL should be 7.5ms for every usb packets.
1565 * To maintain the rate we send 63bytes of usb packets alternatively for
1566 * 7ms and 8ms to maintain the rate as 7.5ms.
1567 */
1568 if (data->usb_alt6_packet_flow) {
1569 interval = 7;
1570 data->usb_alt6_packet_flow = false;
1571 } else {
1572 interval = 6;
1573 data->usb_alt6_packet_flow = true;
1574 }
1575
1576 for (i = 0; i < interval; i++) {
1577 urb->iso_frame_desc[i].offset = offset;
1578 urb->iso_frame_desc[i].length = offset;
1579 }
1580
1581ignore_usb_alt6_packet_flow:
1582 if (len && i < BTUSB_MAX_ISOC_FRAMES) {
1583 urb->iso_frame_desc[i].offset = offset;
1584 urb->iso_frame_desc[i].length = len;
1585 i++;
1586 }
1587
1588 urb->number_of_packets = i;
1589}
1590
1591static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
1592{
1593 int i, offset = 0;
1594
1595 BT_DBG("len %d mtu %d", len, mtu);
1596
1597 for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
1598 i++, offset += mtu, len -= mtu) {
1599 urb->iso_frame_desc[i].offset = offset;
1600 urb->iso_frame_desc[i].length = mtu;
1601 }
1602
1603 if (len && i < BTUSB_MAX_ISOC_FRAMES) {
1604 urb->iso_frame_desc[i].offset = offset;
1605 urb->iso_frame_desc[i].length = len;
1606 i++;
1607 }
1608
1609 urb->number_of_packets = i;
1610}
1611
1612static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags)
1613{
1614 struct btusb_data *data = hci_get_drvdata(hdev);
1615 struct urb *urb;
1616 unsigned char *buf;
1617 unsigned int pipe;
1618 int err, size;
1619
1620 BT_DBG("%s", hdev->name);
1621
1622 if (!data->isoc_rx_ep)
1623 return -ENODEV;
1624
1625 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags);
1626 if (!urb)
1627 return -ENOMEM;
1628
1629 size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
1630 BTUSB_MAX_ISOC_FRAMES;
1631
1632 buf = kmalloc(size, mem_flags);
1633 if (!buf) {
1634 usb_free_urb(urb);
1635 return -ENOMEM;
1636 }
1637
1638 pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
1639
1640 usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete,
1641 hdev, data->isoc_rx_ep->bInterval);
1642
1643 urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;
1644
1645 __fill_isoc_descriptor(urb, size,
1646 le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
1647
1648 usb_anchor_urb(urb, &data->isoc_anchor);
1649
1650 err = usb_submit_urb(urb, mem_flags);
1651 if (err < 0) {
1652 if (err != -EPERM && err != -ENODEV)
1653 bt_dev_err(hdev, "urb %p submission failed (%d)",
1654 urb, -err);
1655 usb_unanchor_urb(urb);
1656 }
1657
1658 usb_free_urb(urb);
1659
1660 return err;
1661}
1662
1663static void btusb_diag_complete(struct urb *urb)
1664{
1665 struct hci_dev *hdev = urb->context;
1666 struct btusb_data *data = hci_get_drvdata(hdev);
1667 int err;
1668
1669 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1670 urb->actual_length);
1671
1672 if (urb->status == 0) {
1673 struct sk_buff *skb;
1674
1675 skb = bt_skb_alloc(urb->actual_length, GFP_ATOMIC);
1676 if (skb) {
1677 skb_put_data(skb, urb->transfer_buffer,
1678 urb->actual_length);
1679 hci_recv_diag(hdev, skb);
1680 }
1681 } else if (urb->status == -ENOENT) {
1682 /* Avoid suspend failed when usb_kill_urb */
1683 return;
1684 }
1685
1686 if (!test_bit(BTUSB_DIAG_RUNNING, &data->flags))
1687 return;
1688
1689 usb_anchor_urb(urb, &data->diag_anchor);
1690 usb_mark_last_busy(data->udev);
1691
1692 err = usb_submit_urb(urb, GFP_ATOMIC);
1693 if (err < 0) {
1694 /* -EPERM: urb is being killed;
1695 * -ENODEV: device got disconnected
1696 */
1697 if (err != -EPERM && err != -ENODEV)
1698 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
1699 urb, -err);
1700 usb_unanchor_urb(urb);
1701 }
1702}
1703
1704static int btusb_submit_diag_urb(struct hci_dev *hdev, gfp_t mem_flags)
1705{
1706 struct btusb_data *data = hci_get_drvdata(hdev);
1707 struct urb *urb;
1708 unsigned char *buf;
1709 unsigned int pipe;
1710 int err, size = HCI_MAX_FRAME_SIZE;
1711
1712 BT_DBG("%s", hdev->name);
1713
1714 if (!data->diag_rx_ep)
1715 return -ENODEV;
1716
1717 urb = usb_alloc_urb(0, mem_flags);
1718 if (!urb)
1719 return -ENOMEM;
1720
1721 buf = kmalloc(size, mem_flags);
1722 if (!buf) {
1723 usb_free_urb(urb);
1724 return -ENOMEM;
1725 }
1726
1727 pipe = usb_rcvbulkpipe(data->udev, data->diag_rx_ep->bEndpointAddress);
1728
1729 usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
1730 btusb_diag_complete, hdev);
1731
1732 urb->transfer_flags |= URB_FREE_BUFFER;
1733
1734 usb_mark_last_busy(data->udev);
1735 usb_anchor_urb(urb, &data->diag_anchor);
1736
1737 err = usb_submit_urb(urb, mem_flags);
1738 if (err < 0) {
1739 if (err != -EPERM && err != -ENODEV)
1740 bt_dev_err(hdev, "urb %p submission failed (%d)",
1741 urb, -err);
1742 usb_unanchor_urb(urb);
1743 }
1744
1745 usb_free_urb(urb);
1746
1747 return err;
1748}
1749
1750static void btusb_tx_complete(struct urb *urb)
1751{
1752 struct sk_buff *skb = urb->context;
1753 struct hci_dev *hdev = (struct hci_dev *)skb->dev;
1754 struct btusb_data *data = hci_get_drvdata(hdev);
1755 unsigned long flags;
1756
1757 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1758 urb->actual_length);
1759
1760 if (!test_bit(HCI_RUNNING, &hdev->flags))
1761 goto done;
1762
1763 if (!urb->status) {
1764 hdev->stat.byte_tx += urb->transfer_buffer_length;
1765 } else {
1766 if (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT)
1767 hci_cmd_sync_cancel(hdev, -urb->status);
1768 hdev->stat.err_tx++;
1769 }
1770
1771done:
1772 spin_lock_irqsave(&data->txlock, flags);
1773 data->tx_in_flight--;
1774 spin_unlock_irqrestore(&data->txlock, flags);
1775
1776 kfree(urb->setup_packet);
1777
1778 kfree_skb(skb);
1779}
1780
1781static void btusb_isoc_tx_complete(struct urb *urb)
1782{
1783 struct sk_buff *skb = urb->context;
1784 struct hci_dev *hdev = (struct hci_dev *)skb->dev;
1785
1786 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1787 urb->actual_length);
1788
1789 if (!test_bit(HCI_RUNNING, &hdev->flags))
1790 goto done;
1791
1792 if (!urb->status)
1793 hdev->stat.byte_tx += urb->transfer_buffer_length;
1794 else
1795 hdev->stat.err_tx++;
1796
1797done:
1798 kfree(urb->setup_packet);
1799
1800 kfree_skb(skb);
1801}
1802
1803static int btusb_open(struct hci_dev *hdev)
1804{
1805 struct btusb_data *data = hci_get_drvdata(hdev);
1806 int err;
1807
1808 BT_DBG("%s", hdev->name);
1809
1810 err = usb_autopm_get_interface(data->intf);
1811 if (err < 0)
1812 return err;
1813
1814 /* Patching USB firmware files prior to starting any URBs of HCI path
1815 * It is more safe to use USB bulk channel for downloading USB patch
1816 */
1817 if (data->setup_on_usb) {
1818 err = data->setup_on_usb(hdev);
1819 if (err < 0)
1820 goto setup_fail;
1821 }
1822
1823 data->intf->needs_remote_wakeup = 1;
1824
1825 if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
1826 goto done;
1827
1828 err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
1829 if (err < 0)
1830 goto failed;
1831
1832 err = btusb_submit_bulk_urb(hdev, GFP_KERNEL);
1833 if (err < 0) {
1834 usb_kill_anchored_urbs(&data->intr_anchor);
1835 goto failed;
1836 }
1837
1838 set_bit(BTUSB_BULK_RUNNING, &data->flags);
1839 btusb_submit_bulk_urb(hdev, GFP_KERNEL);
1840
1841 if (data->diag) {
1842 if (!btusb_submit_diag_urb(hdev, GFP_KERNEL))
1843 set_bit(BTUSB_DIAG_RUNNING, &data->flags);
1844 }
1845
1846done:
1847 usb_autopm_put_interface(data->intf);
1848 return 0;
1849
1850failed:
1851 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
1852setup_fail:
1853 usb_autopm_put_interface(data->intf);
1854 return err;
1855}
1856
1857static void btusb_stop_traffic(struct btusb_data *data)
1858{
1859 usb_kill_anchored_urbs(&data->intr_anchor);
1860 usb_kill_anchored_urbs(&data->bulk_anchor);
1861 usb_kill_anchored_urbs(&data->isoc_anchor);
1862 usb_kill_anchored_urbs(&data->diag_anchor);
1863 usb_kill_anchored_urbs(&data->ctrl_anchor);
1864}
1865
1866static int btusb_close(struct hci_dev *hdev)
1867{
1868 struct btusb_data *data = hci_get_drvdata(hdev);
1869 int err;
1870
1871 BT_DBG("%s", hdev->name);
1872
1873 cancel_delayed_work(&data->rx_work);
1874 cancel_work_sync(&data->work);
1875 cancel_work_sync(&data->waker);
1876
1877 skb_queue_purge(&data->acl_q);
1878
1879 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1880 clear_bit(BTUSB_BULK_RUNNING, &data->flags);
1881 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
1882 clear_bit(BTUSB_DIAG_RUNNING, &data->flags);
1883
1884 btusb_stop_traffic(data);
1885 btusb_free_frags(data);
1886
1887 err = usb_autopm_get_interface(data->intf);
1888 if (err < 0)
1889 goto failed;
1890
1891 data->intf->needs_remote_wakeup = 0;
1892
1893 /* Enable remote wake up for auto-suspend */
1894 if (test_bit(BTUSB_WAKEUP_AUTOSUSPEND, &data->flags))
1895 data->intf->needs_remote_wakeup = 1;
1896
1897 usb_autopm_put_interface(data->intf);
1898
1899failed:
1900 usb_scuttle_anchored_urbs(&data->deferred);
1901 return 0;
1902}
1903
1904static int btusb_flush(struct hci_dev *hdev)
1905{
1906 struct btusb_data *data = hci_get_drvdata(hdev);
1907
1908 BT_DBG("%s", hdev->name);
1909
1910 cancel_delayed_work(&data->rx_work);
1911
1912 skb_queue_purge(&data->acl_q);
1913
1914 usb_kill_anchored_urbs(&data->tx_anchor);
1915 btusb_free_frags(data);
1916
1917 return 0;
1918}
1919
1920static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb)
1921{
1922 struct btusb_data *data = hci_get_drvdata(hdev);
1923 struct usb_ctrlrequest *dr;
1924 struct urb *urb;
1925 unsigned int pipe;
1926
1927 urb = usb_alloc_urb(0, GFP_KERNEL);
1928 if (!urb)
1929 return ERR_PTR(-ENOMEM);
1930
1931 dr = kmalloc(sizeof(*dr), GFP_KERNEL);
1932 if (!dr) {
1933 usb_free_urb(urb);
1934 return ERR_PTR(-ENOMEM);
1935 }
1936
1937 dr->bRequestType = data->cmdreq_type;
1938 dr->bRequest = data->cmdreq;
1939 dr->wIndex = 0;
1940 dr->wValue = 0;
1941 dr->wLength = __cpu_to_le16(skb->len);
1942
1943 pipe = usb_sndctrlpipe(data->udev, 0x00);
1944
1945 usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
1946 skb->data, skb->len, btusb_tx_complete, skb);
1947
1948 skb->dev = (void *)hdev;
1949
1950 return urb;
1951}
1952
1953static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb)
1954{
1955 struct btusb_data *data = hci_get_drvdata(hdev);
1956 struct urb *urb;
1957 unsigned int pipe;
1958
1959 if (!data->bulk_tx_ep)
1960 return ERR_PTR(-ENODEV);
1961
1962 urb = usb_alloc_urb(0, GFP_KERNEL);
1963 if (!urb)
1964 return ERR_PTR(-ENOMEM);
1965
1966 pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
1967
1968 usb_fill_bulk_urb(urb, data->udev, pipe,
1969 skb->data, skb->len, btusb_tx_complete, skb);
1970
1971 skb->dev = (void *)hdev;
1972
1973 return urb;
1974}
1975
1976static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb)
1977{
1978 struct btusb_data *data = hci_get_drvdata(hdev);
1979 struct urb *urb;
1980 unsigned int pipe;
1981
1982 if (!data->isoc_tx_ep)
1983 return ERR_PTR(-ENODEV);
1984
1985 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
1986 if (!urb)
1987 return ERR_PTR(-ENOMEM);
1988
1989 pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress);
1990
1991 usb_fill_int_urb(urb, data->udev, pipe,
1992 skb->data, skb->len, btusb_isoc_tx_complete,
1993 skb, data->isoc_tx_ep->bInterval);
1994
1995 urb->transfer_flags = URB_ISO_ASAP;
1996
1997 if (data->isoc_altsetting == 6)
1998 __fill_isoc_descriptor_msbc(urb, skb->len,
1999 le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize),
2000 data);
2001 else
2002 __fill_isoc_descriptor(urb, skb->len,
2003 le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
2004 skb->dev = (void *)hdev;
2005
2006 return urb;
2007}
2008
2009static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb)
2010{
2011 struct btusb_data *data = hci_get_drvdata(hdev);
2012 int err;
2013
2014 usb_anchor_urb(urb, &data->tx_anchor);
2015
2016 err = usb_submit_urb(urb, GFP_KERNEL);
2017 if (err < 0) {
2018 if (err != -EPERM && err != -ENODEV)
2019 bt_dev_err(hdev, "urb %p submission failed (%d)",
2020 urb, -err);
2021 kfree(urb->setup_packet);
2022 usb_unanchor_urb(urb);
2023 } else {
2024 usb_mark_last_busy(data->udev);
2025 }
2026
2027 usb_free_urb(urb);
2028 return err;
2029}
2030
2031static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb)
2032{
2033 struct btusb_data *data = hci_get_drvdata(hdev);
2034 unsigned long flags;
2035 bool suspending;
2036
2037 spin_lock_irqsave(&data->txlock, flags);
2038 suspending = test_bit(BTUSB_SUSPENDING, &data->flags);
2039 if (!suspending)
2040 data->tx_in_flight++;
2041 spin_unlock_irqrestore(&data->txlock, flags);
2042
2043 if (!suspending)
2044 return submit_tx_urb(hdev, urb);
2045
2046 usb_anchor_urb(urb, &data->deferred);
2047 schedule_work(&data->waker);
2048
2049 usb_free_urb(urb);
2050 return 0;
2051}
2052
2053static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
2054{
2055 struct urb *urb;
2056
2057 BT_DBG("%s", hdev->name);
2058
2059 switch (hci_skb_pkt_type(skb)) {
2060 case HCI_COMMAND_PKT:
2061 urb = alloc_ctrl_urb(hdev, skb);
2062 if (IS_ERR(urb))
2063 return PTR_ERR(urb);
2064
2065 hdev->stat.cmd_tx++;
2066 return submit_or_queue_tx_urb(hdev, urb);
2067
2068 case HCI_ACLDATA_PKT:
2069 urb = alloc_bulk_urb(hdev, skb);
2070 if (IS_ERR(urb))
2071 return PTR_ERR(urb);
2072
2073 hdev->stat.acl_tx++;
2074 return submit_or_queue_tx_urb(hdev, urb);
2075
2076 case HCI_SCODATA_PKT:
2077 if (hci_conn_num(hdev, SCO_LINK) < 1)
2078 return -ENODEV;
2079
2080 urb = alloc_isoc_urb(hdev, skb);
2081 if (IS_ERR(urb))
2082 return PTR_ERR(urb);
2083
2084 hdev->stat.sco_tx++;
2085 return submit_tx_urb(hdev, urb);
2086
2087 case HCI_ISODATA_PKT:
2088 urb = alloc_bulk_urb(hdev, skb);
2089 if (IS_ERR(urb))
2090 return PTR_ERR(urb);
2091
2092 return submit_or_queue_tx_urb(hdev, urb);
2093 }
2094
2095 return -EILSEQ;
2096}
2097
2098static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
2099{
2100 struct btusb_data *data = hci_get_drvdata(hdev);
2101
2102 BT_DBG("%s evt %d", hdev->name, evt);
2103
2104 if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) {
2105 data->sco_num = hci_conn_num(hdev, SCO_LINK);
2106 data->air_mode = evt;
2107 schedule_work(&data->work);
2108 }
2109}
2110
2111static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
2112{
2113 struct btusb_data *data = hci_get_drvdata(hdev);
2114 struct usb_interface *intf = data->isoc;
2115 struct usb_endpoint_descriptor *ep_desc;
2116 int i, err;
2117
2118 if (!data->isoc)
2119 return -ENODEV;
2120
2121 err = usb_set_interface(data->udev, data->isoc_ifnum, altsetting);
2122 if (err < 0) {
2123 bt_dev_err(hdev, "setting interface failed (%d)", -err);
2124 return err;
2125 }
2126
2127 data->isoc_altsetting = altsetting;
2128
2129 data->isoc_tx_ep = NULL;
2130 data->isoc_rx_ep = NULL;
2131
2132 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
2133 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
2134
2135 if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
2136 data->isoc_tx_ep = ep_desc;
2137 continue;
2138 }
2139
2140 if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
2141 data->isoc_rx_ep = ep_desc;
2142 continue;
2143 }
2144 }
2145
2146 if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
2147 bt_dev_err(hdev, "invalid SCO descriptors");
2148 return -ENODEV;
2149 }
2150
2151 return 0;
2152}
2153
2154static int btusb_switch_alt_setting(struct hci_dev *hdev, int new_alts)
2155{
2156 struct btusb_data *data = hci_get_drvdata(hdev);
2157 int err;
2158
2159 if (data->isoc_altsetting != new_alts) {
2160 unsigned long flags;
2161
2162 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
2163 usb_kill_anchored_urbs(&data->isoc_anchor);
2164
2165 /* When isochronous alternate setting needs to be
2166 * changed, because SCO connection has been added
2167 * or removed, a packet fragment may be left in the
2168 * reassembling state. This could lead to wrongly
2169 * assembled fragments.
2170 *
2171 * Clear outstanding fragment when selecting a new
2172 * alternate setting.
2173 */
2174 spin_lock_irqsave(&data->rxlock, flags);
2175 dev_kfree_skb_irq(data->sco_skb);
2176 data->sco_skb = NULL;
2177 spin_unlock_irqrestore(&data->rxlock, flags);
2178
2179 err = __set_isoc_interface(hdev, new_alts);
2180 if (err < 0)
2181 return err;
2182 }
2183
2184 if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
2185 if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
2186 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
2187 else
2188 btusb_submit_isoc_urb(hdev, GFP_KERNEL);
2189 }
2190
2191 return 0;
2192}
2193
2194static struct usb_host_interface *btusb_find_altsetting(struct btusb_data *data,
2195 int alt)
2196{
2197 struct usb_interface *intf = data->isoc;
2198 int i;
2199
2200 BT_DBG("Looking for Alt no :%d", alt);
2201
2202 if (!intf)
2203 return NULL;
2204
2205 for (i = 0; i < intf->num_altsetting; i++) {
2206 if (intf->altsetting[i].desc.bAlternateSetting == alt)
2207 return &intf->altsetting[i];
2208 }
2209
2210 return NULL;
2211}
2212
2213static void btusb_work(struct work_struct *work)
2214{
2215 struct btusb_data *data = container_of(work, struct btusb_data, work);
2216 struct hci_dev *hdev = data->hdev;
2217 int new_alts = 0;
2218 int err;
2219
2220 if (data->sco_num > 0) {
2221 if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
2222 err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
2223 if (err < 0) {
2224 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
2225 usb_kill_anchored_urbs(&data->isoc_anchor);
2226 return;
2227 }
2228
2229 set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
2230 }
2231
2232 if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_CVSD) {
2233 if (hdev->voice_setting & 0x0020) {
2234 static const int alts[3] = { 2, 4, 5 };
2235
2236 new_alts = alts[data->sco_num - 1];
2237 } else {
2238 new_alts = data->sco_num;
2239 }
2240 } else if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_TRANSP) {
2241 /* Bluetooth USB spec recommends alt 6 (63 bytes), but
2242 * many adapters do not support it. Alt 1 appears to
2243 * work for all adapters that do not have alt 6, and
2244 * which work with WBS at all. Some devices prefer
2245 * alt 3 (HCI payload >= 60 Bytes let air packet
2246 * data satisfy 60 bytes), requiring
2247 * MTU >= 3 (packets) * 25 (size) - 3 (headers) = 72
2248 * see also Core spec 5, vol 4, B 2.1.1 & Table 2.1.
2249 */
2250 if (btusb_find_altsetting(data, 6))
2251 new_alts = 6;
2252 else if (btusb_find_altsetting(data, 3) &&
2253 hdev->sco_mtu >= 72 &&
2254 test_bit(BTUSB_USE_ALT3_FOR_WBS, &data->flags))
2255 new_alts = 3;
2256 else
2257 new_alts = 1;
2258 }
2259
2260 if (btusb_switch_alt_setting(hdev, new_alts) < 0)
2261 bt_dev_err(hdev, "set USB alt:(%d) failed!", new_alts);
2262 } else {
2263 usb_kill_anchored_urbs(&data->isoc_anchor);
2264
2265 if (test_and_clear_bit(BTUSB_ISOC_RUNNING, &data->flags))
2266 __set_isoc_interface(hdev, 0);
2267
2268 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
2269 usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
2270 }
2271}
2272
2273static void btusb_waker(struct work_struct *work)
2274{
2275 struct btusb_data *data = container_of(work, struct btusb_data, waker);
2276 int err;
2277
2278 err = usb_autopm_get_interface(data->intf);
2279 if (err < 0)
2280 return;
2281
2282 usb_autopm_put_interface(data->intf);
2283}
2284
2285static void btusb_rx_work(struct work_struct *work)
2286{
2287 struct btusb_data *data = container_of(work, struct btusb_data,
2288 rx_work.work);
2289 struct sk_buff *skb;
2290
2291 /* Dequeue ACL data received during the interval */
2292 while ((skb = skb_dequeue(&data->acl_q)))
2293 data->recv_acl(data->hdev, skb);
2294}
2295
2296static int btusb_setup_bcm92035(struct hci_dev *hdev)
2297{
2298 struct sk_buff *skb;
2299 u8 val = 0x00;
2300
2301 BT_DBG("%s", hdev->name);
2302
2303 skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
2304 if (IS_ERR(skb))
2305 bt_dev_err(hdev, "BCM92035 command failed (%ld)", PTR_ERR(skb));
2306 else
2307 kfree_skb(skb);
2308
2309 return 0;
2310}
2311
2312static int btusb_setup_csr(struct hci_dev *hdev)
2313{
2314 struct btusb_data *data = hci_get_drvdata(hdev);
2315 u16 bcdDevice = le16_to_cpu(data->udev->descriptor.bcdDevice);
2316 struct hci_rp_read_local_version *rp;
2317 struct sk_buff *skb;
2318 bool is_fake = false;
2319 int ret;
2320
2321 BT_DBG("%s", hdev->name);
2322
2323 skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
2324 HCI_INIT_TIMEOUT);
2325 if (IS_ERR(skb)) {
2326 int err = PTR_ERR(skb);
2327 bt_dev_err(hdev, "CSR: Local version failed (%d)", err);
2328 return err;
2329 }
2330
2331 rp = skb_pull_data(skb, sizeof(*rp));
2332 if (!rp) {
2333 bt_dev_err(hdev, "CSR: Local version length mismatch");
2334 kfree_skb(skb);
2335 return -EIO;
2336 }
2337
2338 bt_dev_info(hdev, "CSR: Setting up dongle with HCI ver=%u rev=%04x",
2339 rp->hci_ver, le16_to_cpu(rp->hci_rev));
2340
2341 bt_dev_info(hdev, "LMP ver=%u subver=%04x; manufacturer=%u",
2342 rp->lmp_ver, le16_to_cpu(rp->lmp_subver),
2343 le16_to_cpu(rp->manufacturer));
2344
2345 /* Detect a wide host of Chinese controllers that aren't CSR.
2346 *
2347 * Known fake bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891
2348 *
2349 * The main thing they have in common is that these are really popular low-cost
2350 * options that support newer Bluetooth versions but rely on heavy VID/PID
2351 * squatting of this poor old Bluetooth 1.1 device. Even sold as such.
2352 *
2353 * We detect actual CSR devices by checking that the HCI manufacturer code
2354 * is Cambridge Silicon Radio (10) and ensuring that LMP sub-version and
2355 * HCI rev values always match. As they both store the firmware number.
2356 */
2357 if (le16_to_cpu(rp->manufacturer) != 10 ||
2358 le16_to_cpu(rp->hci_rev) != le16_to_cpu(rp->lmp_subver))
2359 is_fake = true;
2360
2361 /* Known legit CSR firmware build numbers and their supported BT versions:
2362 * - 1.1 (0x1) -> 0x0073, 0x020d, 0x033c, 0x034e
2363 * - 1.2 (0x2) -> 0x04d9, 0x0529
2364 * - 2.0 (0x3) -> 0x07a6, 0x07ad, 0x0c5c
2365 * - 2.1 (0x4) -> 0x149c, 0x1735, 0x1899 (0x1899 is a BlueCore4-External)
2366 * - 4.0 (0x6) -> 0x1d86, 0x2031, 0x22bb
2367 *
2368 * e.g. Real CSR dongles with LMP subversion 0x73 are old enough that
2369 * support BT 1.1 only; so it's a dead giveaway when some
2370 * third-party BT 4.0 dongle reuses it.
2371 */
2372 else if (le16_to_cpu(rp->lmp_subver) <= 0x034e &&
2373 rp->hci_ver > BLUETOOTH_VER_1_1)
2374 is_fake = true;
2375
2376 else if (le16_to_cpu(rp->lmp_subver) <= 0x0529 &&
2377 rp->hci_ver > BLUETOOTH_VER_1_2)
2378 is_fake = true;
2379
2380 else if (le16_to_cpu(rp->lmp_subver) <= 0x0c5c &&
2381 rp->hci_ver > BLUETOOTH_VER_2_0)
2382 is_fake = true;
2383
2384 else if (le16_to_cpu(rp->lmp_subver) <= 0x1899 &&
2385 rp->hci_ver > BLUETOOTH_VER_2_1)
2386 is_fake = true;
2387
2388 else if (le16_to_cpu(rp->lmp_subver) <= 0x22bb &&
2389 rp->hci_ver > BLUETOOTH_VER_4_0)
2390 is_fake = true;
2391
2392 /* Other clones which beat all the above checks */
2393 else if (bcdDevice == 0x0134 &&
2394 le16_to_cpu(rp->lmp_subver) == 0x0c5c &&
2395 rp->hci_ver == BLUETOOTH_VER_2_0)
2396 is_fake = true;
2397
2398 if (is_fake) {
2399 bt_dev_warn(hdev, "CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...");
2400
2401 /* Generally these clones have big discrepancies between
2402 * advertised features and what's actually supported.
2403 * Probably will need to be expanded in the future;
2404 * without these the controller will lock up.
2405 */
2406 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
2407 set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
2408 set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks);
2409 set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks);
2410
2411 /* Clear the reset quirk since this is not an actual
2412 * early Bluetooth 1.1 device from CSR.
2413 */
2414 clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
2415 clear_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
2416
2417 /*
2418 * Special workaround for these BT 4.0 chip clones, and potentially more:
2419 *
2420 * - 0x0134: a Barrot 8041a02 (HCI rev: 0x0810 sub: 0x1012)
2421 * - 0x7558: IC markings FR3191AHAL 749H15143 (HCI rev/sub-version: 0x0709)
2422 *
2423 * These controllers are really messed-up.
2424 *
2425 * 1. Their bulk RX endpoint will never report any data unless
2426 * the device was suspended at least once (yes, really).
2427 * 2. They will not wakeup when autosuspended and receiving data
2428 * on their bulk RX endpoint from e.g. a keyboard or mouse
2429 * (IOW remote-wakeup support is broken for the bulk endpoint).
2430 *
2431 * To fix 1. enable runtime-suspend, force-suspend the
2432 * HCI and then wake-it up by disabling runtime-suspend.
2433 *
2434 * To fix 2. clear the HCI's can_wake flag, this way the HCI
2435 * will still be autosuspended when it is not open.
2436 *
2437 * --
2438 *
2439 * Because these are widespread problems we prefer generic solutions; so
2440 * apply this initialization quirk to every controller that gets here,
2441 * it should be harmless. The alternative is to not work at all.
2442 */
2443 pm_runtime_allow(&data->udev->dev);
2444
2445 ret = pm_runtime_suspend(&data->udev->dev);
2446 if (ret >= 0)
2447 msleep(200);
2448 else
2449 bt_dev_warn(hdev, "CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround");
2450
2451 pm_runtime_forbid(&data->udev->dev);
2452
2453 device_set_wakeup_capable(&data->udev->dev, false);
2454
2455 /* Re-enable autosuspend if this was requested */
2456 if (enable_autosuspend)
2457 usb_enable_autosuspend(data->udev);
2458 }
2459
2460 kfree_skb(skb);
2461
2462 return 0;
2463}
2464
2465static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
2466{
2467 struct sk_buff *skb;
2468 struct hci_event_hdr *hdr;
2469 struct hci_ev_cmd_complete *evt;
2470
2471 skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL);
2472 if (!skb)
2473 return -ENOMEM;
2474
2475 hdr = skb_put(skb, sizeof(*hdr));
2476 hdr->evt = HCI_EV_CMD_COMPLETE;
2477 hdr->plen = sizeof(*evt) + 1;
2478
2479 evt = skb_put(skb, sizeof(*evt));
2480 evt->ncmd = 0x01;
2481 evt->opcode = cpu_to_le16(opcode);
2482
2483 skb_put_u8(skb, 0x00);
2484
2485 hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
2486
2487 return hci_recv_frame(hdev, skb);
2488}
2489
2490static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
2491 int count)
2492{
2493 struct hci_dev *hdev = data->hdev;
2494
2495 /* When the device is in bootloader mode, then it can send
2496 * events via the bulk endpoint. These events are treated the
2497 * same way as the ones received from the interrupt endpoint.
2498 */
2499 if (btintel_test_flag(hdev, INTEL_BOOTLOADER))
2500 return btusb_recv_intr(data, buffer, count);
2501
2502 return btusb_recv_bulk(data, buffer, count);
2503}
2504
2505static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
2506{
2507 struct urb *urb;
2508
2509 BT_DBG("%s", hdev->name);
2510
2511 switch (hci_skb_pkt_type(skb)) {
2512 case HCI_COMMAND_PKT:
2513 if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
2514 struct hci_command_hdr *cmd = (void *)skb->data;
2515 __u16 opcode = le16_to_cpu(cmd->opcode);
2516
2517 /* When in bootloader mode and the command 0xfc09
2518 * is received, it needs to be send down the
2519 * bulk endpoint. So allocate a bulk URB instead.
2520 */
2521 if (opcode == 0xfc09)
2522 urb = alloc_bulk_urb(hdev, skb);
2523 else
2524 urb = alloc_ctrl_urb(hdev, skb);
2525
2526 /* When the 0xfc01 command is issued to boot into
2527 * the operational firmware, it will actually not
2528 * send a command complete event. To keep the flow
2529 * control working inject that event here.
2530 */
2531 if (opcode == 0xfc01)
2532 inject_cmd_complete(hdev, opcode);
2533 } else {
2534 urb = alloc_ctrl_urb(hdev, skb);
2535 }
2536 if (IS_ERR(urb))
2537 return PTR_ERR(urb);
2538
2539 hdev->stat.cmd_tx++;
2540 return submit_or_queue_tx_urb(hdev, urb);
2541
2542 case HCI_ACLDATA_PKT:
2543 urb = alloc_bulk_urb(hdev, skb);
2544 if (IS_ERR(urb))
2545 return PTR_ERR(urb);
2546
2547 hdev->stat.acl_tx++;
2548 return submit_or_queue_tx_urb(hdev, urb);
2549
2550 case HCI_SCODATA_PKT:
2551 if (hci_conn_num(hdev, SCO_LINK) < 1)
2552 return -ENODEV;
2553
2554 urb = alloc_isoc_urb(hdev, skb);
2555 if (IS_ERR(urb))
2556 return PTR_ERR(urb);
2557
2558 hdev->stat.sco_tx++;
2559 return submit_tx_urb(hdev, urb);
2560
2561 case HCI_ISODATA_PKT:
2562 urb = alloc_bulk_urb(hdev, skb);
2563 if (IS_ERR(urb))
2564 return PTR_ERR(urb);
2565
2566 return submit_or_queue_tx_urb(hdev, urb);
2567 }
2568
2569 return -EILSEQ;
2570}
2571
2572static int btusb_setup_realtek(struct hci_dev *hdev)
2573{
2574 struct btusb_data *data = hci_get_drvdata(hdev);
2575 int ret;
2576
2577 ret = btrtl_setup_realtek(hdev);
2578
2579 if (btrealtek_test_flag(data->hdev, REALTEK_ALT6_CONTINUOUS_TX_CHIP))
2580 set_bit(BTUSB_ALT6_CONTINUOUS_TX, &data->flags);
2581
2582 return ret;
2583}
2584
2585static int btusb_recv_event_realtek(struct hci_dev *hdev, struct sk_buff *skb)
2586{
2587 if (skb->data[0] == HCI_VENDOR_PKT && skb->data[2] == RTK_SUB_EVENT_CODE_COREDUMP) {
2588 struct rtk_dev_coredump_hdr hdr = {
2589 .code = RTK_DEVCOREDUMP_CODE_MEMDUMP,
2590 };
2591
2592 bt_dev_dbg(hdev, "RTL: received coredump vendor evt, len %u",
2593 skb->len);
2594
2595 btusb_rtl_alloc_devcoredump(hdev, &hdr, skb->data, skb->len);
2596 kfree_skb(skb);
2597
2598 return 0;
2599 }
2600
2601 return hci_recv_frame(hdev, skb);
2602}
2603
2604/* UHW CR mapping */
2605#define MTK_BT_MISC 0x70002510
2606#define MTK_BT_SUBSYS_RST 0x70002610
2607#define MTK_UDMA_INT_STA_BT 0x74000024
2608#define MTK_UDMA_INT_STA_BT1 0x74000308
2609#define MTK_BT_WDT_STATUS 0x740003A0
2610#define MTK_EP_RST_OPT 0x74011890
2611#define MTK_EP_RST_IN_OUT_OPT 0x00010001
2612#define MTK_BT_RST_DONE 0x00000100
2613#define MTK_BT_RESET_REG_CONNV3 0x70028610
2614#define MTK_BT_READ_DEV_ID 0x70010200
2615
2616
2617static void btusb_mtk_wmt_recv(struct urb *urb)
2618{
2619 struct hci_dev *hdev = urb->context;
2620 struct btusb_data *data = hci_get_drvdata(hdev);
2621 struct sk_buff *skb;
2622 int err;
2623
2624 if (urb->status == 0 && urb->actual_length > 0) {
2625 hdev->stat.byte_rx += urb->actual_length;
2626
2627 /* WMT event shouldn't be fragmented and the size should be
2628 * less than HCI_WMT_MAX_EVENT_SIZE.
2629 */
2630 skb = bt_skb_alloc(HCI_WMT_MAX_EVENT_SIZE, GFP_ATOMIC);
2631 if (!skb) {
2632 hdev->stat.err_rx++;
2633 kfree(urb->setup_packet);
2634 return;
2635 }
2636
2637 hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
2638 skb_put_data(skb, urb->transfer_buffer, urb->actual_length);
2639
2640 /* When someone waits for the WMT event, the skb is being cloned
2641 * and being processed the events from there then.
2642 */
2643 if (test_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags)) {
2644 data->evt_skb = skb_clone(skb, GFP_ATOMIC);
2645 if (!data->evt_skb) {
2646 kfree_skb(skb);
2647 kfree(urb->setup_packet);
2648 return;
2649 }
2650 }
2651
2652 err = hci_recv_frame(hdev, skb);
2653 if (err < 0) {
2654 kfree_skb(data->evt_skb);
2655 data->evt_skb = NULL;
2656 kfree(urb->setup_packet);
2657 return;
2658 }
2659
2660 if (test_and_clear_bit(BTUSB_TX_WAIT_VND_EVT,
2661 &data->flags)) {
2662 /* Barrier to sync with other CPUs */
2663 smp_mb__after_atomic();
2664 wake_up_bit(&data->flags,
2665 BTUSB_TX_WAIT_VND_EVT);
2666 }
2667 kfree(urb->setup_packet);
2668 return;
2669 } else if (urb->status == -ENOENT) {
2670 /* Avoid suspend failed when usb_kill_urb */
2671 return;
2672 }
2673
2674 usb_mark_last_busy(data->udev);
2675
2676 /* The URB complete handler is still called with urb->actual_length = 0
2677 * when the event is not available, so we should keep re-submitting
2678 * URB until WMT event returns, Also, It's necessary to wait some time
2679 * between the two consecutive control URBs to relax the target device
2680 * to generate the event. Otherwise, the WMT event cannot return from
2681 * the device successfully.
2682 */
2683 udelay(500);
2684
2685 usb_anchor_urb(urb, &data->ctrl_anchor);
2686 err = usb_submit_urb(urb, GFP_ATOMIC);
2687 if (err < 0) {
2688 kfree(urb->setup_packet);
2689 /* -EPERM: urb is being killed;
2690 * -ENODEV: device got disconnected
2691 */
2692 if (err != -EPERM && err != -ENODEV)
2693 bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
2694 urb, -err);
2695 usb_unanchor_urb(urb);
2696 }
2697}
2698
2699static int btusb_mtk_submit_wmt_recv_urb(struct hci_dev *hdev)
2700{
2701 struct btusb_data *data = hci_get_drvdata(hdev);
2702 struct usb_ctrlrequest *dr;
2703 unsigned char *buf;
2704 int err, size = 64;
2705 unsigned int pipe;
2706 struct urb *urb;
2707
2708 urb = usb_alloc_urb(0, GFP_KERNEL);
2709 if (!urb)
2710 return -ENOMEM;
2711
2712 dr = kmalloc(sizeof(*dr), GFP_KERNEL);
2713 if (!dr) {
2714 usb_free_urb(urb);
2715 return -ENOMEM;
2716 }
2717
2718 dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_IN;
2719 dr->bRequest = 1;
2720 dr->wIndex = cpu_to_le16(0);
2721 dr->wValue = cpu_to_le16(48);
2722 dr->wLength = cpu_to_le16(size);
2723
2724 buf = kmalloc(size, GFP_KERNEL);
2725 if (!buf) {
2726 kfree(dr);
2727 usb_free_urb(urb);
2728 return -ENOMEM;
2729 }
2730
2731 pipe = usb_rcvctrlpipe(data->udev, 0);
2732
2733 usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
2734 buf, size, btusb_mtk_wmt_recv, hdev);
2735
2736 urb->transfer_flags |= URB_FREE_BUFFER;
2737
2738 usb_anchor_urb(urb, &data->ctrl_anchor);
2739 err = usb_submit_urb(urb, GFP_KERNEL);
2740 if (err < 0) {
2741 if (err != -EPERM && err != -ENODEV)
2742 bt_dev_err(hdev, "urb %p submission failed (%d)",
2743 urb, -err);
2744 usb_unanchor_urb(urb);
2745 }
2746
2747 usb_free_urb(urb);
2748
2749 return err;
2750}
2751
2752static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,
2753 struct btmtk_hci_wmt_params *wmt_params)
2754{
2755 struct btusb_data *data = hci_get_drvdata(hdev);
2756 struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
2757 u32 hlen, status = BTMTK_WMT_INVALID;
2758 struct btmtk_hci_wmt_evt *wmt_evt;
2759 struct btmtk_hci_wmt_cmd *wc;
2760 struct btmtk_wmt_hdr *hdr;
2761 int err;
2762
2763 /* Send the WMT command and wait until the WMT event returns */
2764 hlen = sizeof(*hdr) + wmt_params->dlen;
2765 if (hlen > 255)
2766 return -EINVAL;
2767
2768 wc = kzalloc(hlen, GFP_KERNEL);
2769 if (!wc)
2770 return -ENOMEM;
2771
2772 hdr = &wc->hdr;
2773 hdr->dir = 1;
2774 hdr->op = wmt_params->op;
2775 hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
2776 hdr->flag = wmt_params->flag;
2777 memcpy(wc->data, wmt_params->data, wmt_params->dlen);
2778
2779 set_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
2780
2781 /* WMT cmd/event doesn't follow up the generic HCI cmd/event handling,
2782 * it needs constantly polling control pipe until the host received the
2783 * WMT event, thus, we should require to specifically acquire PM counter
2784 * on the USB to prevent the interface from entering auto suspended
2785 * while WMT cmd/event in progress.
2786 */
2787 err = usb_autopm_get_interface(data->intf);
2788 if (err < 0)
2789 goto err_free_wc;
2790
2791 err = __hci_cmd_send(hdev, 0xfc6f, hlen, wc);
2792
2793 if (err < 0) {
2794 clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
2795 usb_autopm_put_interface(data->intf);
2796 goto err_free_wc;
2797 }
2798
2799 /* Submit control IN URB on demand to process the WMT event */
2800 err = btusb_mtk_submit_wmt_recv_urb(hdev);
2801
2802 usb_autopm_put_interface(data->intf);
2803
2804 if (err < 0)
2805 goto err_free_wc;
2806
2807 /* The vendor specific WMT commands are all answered by a vendor
2808 * specific event and will have the Command Status or Command
2809 * Complete as with usual HCI command flow control.
2810 *
2811 * After sending the command, wait for BTUSB_TX_WAIT_VND_EVT
2812 * state to be cleared. The driver specific event receive routine
2813 * will clear that state and with that indicate completion of the
2814 * WMT command.
2815 */
2816 err = wait_on_bit_timeout(&data->flags, BTUSB_TX_WAIT_VND_EVT,
2817 TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
2818 if (err == -EINTR) {
2819 bt_dev_err(hdev, "Execution of wmt command interrupted");
2820 clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
2821 goto err_free_wc;
2822 }
2823
2824 if (err) {
2825 bt_dev_err(hdev, "Execution of wmt command timed out");
2826 clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
2827 err = -ETIMEDOUT;
2828 goto err_free_wc;
2829 }
2830
2831 if (data->evt_skb == NULL)
2832 goto err_free_wc;
2833
2834 /* Parse and handle the return WMT event */
2835 wmt_evt = (struct btmtk_hci_wmt_evt *)data->evt_skb->data;
2836 if (wmt_evt->whdr.op != hdr->op) {
2837 bt_dev_err(hdev, "Wrong op received %d expected %d",
2838 wmt_evt->whdr.op, hdr->op);
2839 err = -EIO;
2840 goto err_free_skb;
2841 }
2842
2843 switch (wmt_evt->whdr.op) {
2844 case BTMTK_WMT_SEMAPHORE:
2845 if (wmt_evt->whdr.flag == 2)
2846 status = BTMTK_WMT_PATCH_UNDONE;
2847 else
2848 status = BTMTK_WMT_PATCH_DONE;
2849 break;
2850 case BTMTK_WMT_FUNC_CTRL:
2851 wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
2852 if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
2853 status = BTMTK_WMT_ON_DONE;
2854 else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
2855 status = BTMTK_WMT_ON_PROGRESS;
2856 else
2857 status = BTMTK_WMT_ON_UNDONE;
2858 break;
2859 case BTMTK_WMT_PATCH_DWNLD:
2860 if (wmt_evt->whdr.flag == 2)
2861 status = BTMTK_WMT_PATCH_DONE;
2862 else if (wmt_evt->whdr.flag == 1)
2863 status = BTMTK_WMT_PATCH_PROGRESS;
2864 else
2865 status = BTMTK_WMT_PATCH_UNDONE;
2866 break;
2867 }
2868
2869 if (wmt_params->status)
2870 *wmt_params->status = status;
2871
2872err_free_skb:
2873 kfree_skb(data->evt_skb);
2874 data->evt_skb = NULL;
2875err_free_wc:
2876 kfree(wc);
2877 return err;
2878}
2879
2880static int btusb_mtk_func_query(struct hci_dev *hdev)
2881{
2882 struct btmtk_hci_wmt_params wmt_params;
2883 int status, err;
2884 u8 param = 0;
2885
2886 /* Query whether the function is enabled */
2887 wmt_params.op = BTMTK_WMT_FUNC_CTRL;
2888 wmt_params.flag = 4;
2889 wmt_params.dlen = sizeof(param);
2890 wmt_params.data = ¶m;
2891 wmt_params.status = &status;
2892
2893 err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
2894 if (err < 0) {
2895 bt_dev_err(hdev, "Failed to query function status (%d)", err);
2896 return err;
2897 }
2898
2899 return status;
2900}
2901
2902static int btusb_mtk_uhw_reg_write(struct btusb_data *data, u32 reg, u32 val)
2903{
2904 struct hci_dev *hdev = data->hdev;
2905 int pipe, err;
2906 void *buf;
2907
2908 buf = kzalloc(4, GFP_KERNEL);
2909 if (!buf)
2910 return -ENOMEM;
2911
2912 put_unaligned_le32(val, buf);
2913
2914 pipe = usb_sndctrlpipe(data->udev, 0);
2915 err = usb_control_msg(data->udev, pipe, 0x02,
2916 0x5E,
2917 reg >> 16, reg & 0xffff,
2918 buf, 4, USB_CTRL_SET_TIMEOUT);
2919 if (err < 0) {
2920 bt_dev_err(hdev, "Failed to write uhw reg(%d)", err);
2921 goto err_free_buf;
2922 }
2923
2924err_free_buf:
2925 kfree(buf);
2926
2927 return err;
2928}
2929
2930static int btusb_mtk_uhw_reg_read(struct btusb_data *data, u32 reg, u32 *val)
2931{
2932 struct hci_dev *hdev = data->hdev;
2933 int pipe, err;
2934 void *buf;
2935
2936 buf = kzalloc(4, GFP_KERNEL);
2937 if (!buf)
2938 return -ENOMEM;
2939
2940 pipe = usb_rcvctrlpipe(data->udev, 0);
2941 err = usb_control_msg(data->udev, pipe, 0x01,
2942 0xDE,
2943 reg >> 16, reg & 0xffff,
2944 buf, 4, USB_CTRL_SET_TIMEOUT);
2945 if (err < 0) {
2946 bt_dev_err(hdev, "Failed to read uhw reg(%d)", err);
2947 goto err_free_buf;
2948 }
2949
2950 *val = get_unaligned_le32(buf);
2951 bt_dev_dbg(hdev, "reg=%x, value=0x%08x", reg, *val);
2952
2953err_free_buf:
2954 kfree(buf);
2955
2956 return err;
2957}
2958
2959static int btusb_mtk_reg_read(struct btusb_data *data, u32 reg, u32 *val)
2960{
2961 int pipe, err, size = sizeof(u32);
2962 void *buf;
2963
2964 buf = kzalloc(size, GFP_KERNEL);
2965 if (!buf)
2966 return -ENOMEM;
2967
2968 pipe = usb_rcvctrlpipe(data->udev, 0);
2969 err = usb_control_msg(data->udev, pipe, 0x63,
2970 USB_TYPE_VENDOR | USB_DIR_IN,
2971 reg >> 16, reg & 0xffff,
2972 buf, size, USB_CTRL_SET_TIMEOUT);
2973 if (err < 0)
2974 goto err_free_buf;
2975
2976 *val = get_unaligned_le32(buf);
2977
2978err_free_buf:
2979 kfree(buf);
2980
2981 return err;
2982}
2983
2984static int btusb_mtk_id_get(struct btusb_data *data, u32 reg, u32 *id)
2985{
2986 return btusb_mtk_reg_read(data, reg, id);
2987}
2988
2989static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
2990{
2991 struct btusb_data *data = hci_get_drvdata(hdev);
2992 u32 val = 0;
2993
2994 btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val);
2995
2996 return val & MTK_BT_RST_DONE;
2997}
2998
2999static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
3000{
3001 struct btusb_data *data = hci_get_drvdata(hdev);
3002 struct btmediatek_data *mediatek;
3003 u32 val;
3004 int err;
3005
3006 /* It's MediaTek specific bluetooth reset mechanism via USB */
3007 if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
3008 bt_dev_err(hdev, "last reset failed? Not resetting again");
3009 return -EBUSY;
3010 }
3011
3012 err = usb_autopm_get_interface(data->intf);
3013 if (err < 0)
3014 return err;
3015
3016 btusb_stop_traffic(data);
3017 usb_kill_anchored_urbs(&data->tx_anchor);
3018 mediatek = hci_get_priv(hdev);
3019
3020 if (mediatek->dev_id == 0x7925) {
3021 btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
3022 val |= (1 << 5);
3023 btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
3024 btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
3025 val &= 0xFFFF00FF;
3026 val |= (1 << 13);
3027 btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
3028 btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
3029 btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
3030 val |= (1 << 0);
3031 btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
3032 btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
3033 btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
3034 btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
3035 btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
3036 msleep(100);
3037 } else {
3038 /* It's Device EndPoint Reset Option Register */
3039 bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
3040 btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
3041 btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
3042
3043 /* Reset the bluetooth chip via USB interface. */
3044 btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
3045 btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
3046 btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
3047 btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
3048 btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
3049 /* MT7921 need to delay 20ms between toggle reset bit */
3050 msleep(20);
3051 btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
3052 btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
3053 }
3054
3055 err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
3056 val & MTK_BT_RST_DONE, 20000, 1000000);
3057 if (err < 0)
3058 bt_dev_err(hdev, "Reset timeout");
3059
3060 btusb_mtk_id_get(data, 0x70010200, &val);
3061 if (!val)
3062 bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
3063
3064 usb_queue_reset_device(data->intf);
3065
3066 clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
3067
3068 return err;
3069}
3070
3071static int btusb_mtk_setup(struct hci_dev *hdev)
3072{
3073 struct btusb_data *data = hci_get_drvdata(hdev);
3074 struct btmtk_hci_wmt_params wmt_params;
3075 ktime_t calltime, delta, rettime;
3076 struct btmtk_tci_sleep tci_sleep;
3077 unsigned long long duration;
3078 struct sk_buff *skb;
3079 const char *fwname;
3080 int err, status;
3081 u32 dev_id = 0;
3082 char fw_bin_name[64];
3083 u32 fw_version = 0;
3084 u8 param;
3085 struct btmediatek_data *mediatek;
3086
3087 calltime = ktime_get();
3088
3089 err = btusb_mtk_id_get(data, 0x80000008, &dev_id);
3090 if (err < 0) {
3091 bt_dev_err(hdev, "Failed to get device id (%d)", err);
3092 return err;
3093 }
3094
3095 if (!dev_id || dev_id != 0x7663) {
3096 err = btusb_mtk_id_get(data, 0x70010200, &dev_id);
3097 if (err < 0) {
3098 bt_dev_err(hdev, "Failed to get device id (%d)", err);
3099 return err;
3100 }
3101 err = btusb_mtk_id_get(data, 0x80021004, &fw_version);
3102 if (err < 0) {
3103 bt_dev_err(hdev, "Failed to get fw version (%d)", err);
3104 return err;
3105 }
3106 }
3107
3108 mediatek = hci_get_priv(hdev);
3109 mediatek->dev_id = dev_id;
3110 mediatek->reset_sync = btusb_mtk_reset;
3111
3112 err = btmtk_register_coredump(hdev, btusb_driver.name, fw_version);
3113 if (err < 0)
3114 bt_dev_err(hdev, "Failed to register coredump (%d)", err);
3115
3116 switch (dev_id) {
3117 case 0x7663:
3118 fwname = FIRMWARE_MT7663;
3119 break;
3120 case 0x7668:
3121 fwname = FIRMWARE_MT7668;
3122 break;
3123 case 0x7922:
3124 case 0x7961:
3125 case 0x7925:
3126 if (dev_id == 0x7925)
3127 snprintf(fw_bin_name, sizeof(fw_bin_name),
3128 "mediatek/mt%04x/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
3129 dev_id & 0xffff, dev_id & 0xffff, (fw_version & 0xff) + 1);
3130 else
3131 snprintf(fw_bin_name, sizeof(fw_bin_name),
3132 "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
3133 dev_id & 0xffff, (fw_version & 0xff) + 1);
3134
3135 err = btmtk_setup_firmware_79xx(hdev, fw_bin_name,
3136 btusb_mtk_hci_wmt_sync);
3137 if (err < 0) {
3138 bt_dev_err(hdev, "Failed to set up firmware (%d)", err);
3139 return err;
3140 }
3141
3142 /* It's Device EndPoint Reset Option Register */
3143 btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
3144
3145 /* Enable Bluetooth protocol */
3146 param = 1;
3147 wmt_params.op = BTMTK_WMT_FUNC_CTRL;
3148 wmt_params.flag = 0;
3149 wmt_params.dlen = sizeof(param);
3150 wmt_params.data = ¶m;
3151 wmt_params.status = NULL;
3152
3153 err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
3154 if (err < 0) {
3155 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
3156 return err;
3157 }
3158
3159 hci_set_msft_opcode(hdev, 0xFD30);
3160 hci_set_aosp_capable(hdev);
3161 goto done;
3162 default:
3163 bt_dev_err(hdev, "Unsupported hardware variant (%08x)",
3164 dev_id);
3165 return -ENODEV;
3166 }
3167
3168 /* Query whether the firmware is already download */
3169 wmt_params.op = BTMTK_WMT_SEMAPHORE;
3170 wmt_params.flag = 1;
3171 wmt_params.dlen = 0;
3172 wmt_params.data = NULL;
3173 wmt_params.status = &status;
3174
3175 err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
3176 if (err < 0) {
3177 bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
3178 return err;
3179 }
3180
3181 if (status == BTMTK_WMT_PATCH_DONE) {
3182 bt_dev_info(hdev, "firmware already downloaded");
3183 goto ignore_setup_fw;
3184 }
3185
3186 /* Setup a firmware which the device definitely requires */
3187 err = btmtk_setup_firmware(hdev, fwname,
3188 btusb_mtk_hci_wmt_sync);
3189 if (err < 0)
3190 return err;
3191
3192ignore_setup_fw:
3193 err = readx_poll_timeout(btusb_mtk_func_query, hdev, status,
3194 status < 0 || status != BTMTK_WMT_ON_PROGRESS,
3195 2000, 5000000);
3196 /* -ETIMEDOUT happens */
3197 if (err < 0)
3198 return err;
3199
3200 /* The other errors happen in btusb_mtk_func_query */
3201 if (status < 0)
3202 return status;
3203
3204 if (status == BTMTK_WMT_ON_DONE) {
3205 bt_dev_info(hdev, "function already on");
3206 goto ignore_func_on;
3207 }
3208
3209 /* Enable Bluetooth protocol */
3210 param = 1;
3211 wmt_params.op = BTMTK_WMT_FUNC_CTRL;
3212 wmt_params.flag = 0;
3213 wmt_params.dlen = sizeof(param);
3214 wmt_params.data = ¶m;
3215 wmt_params.status = NULL;
3216
3217 err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
3218 if (err < 0) {
3219 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
3220 return err;
3221 }
3222
3223ignore_func_on:
3224 /* Apply the low power environment setup */
3225 tci_sleep.mode = 0x5;
3226 tci_sleep.duration = cpu_to_le16(0x640);
3227 tci_sleep.host_duration = cpu_to_le16(0x640);
3228 tci_sleep.host_wakeup_pin = 0;
3229 tci_sleep.time_compensation = 0;
3230
3231 skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
3232 HCI_INIT_TIMEOUT);
3233 if (IS_ERR(skb)) {
3234 err = PTR_ERR(skb);
3235 bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
3236 return err;
3237 }
3238 kfree_skb(skb);
3239
3240done:
3241 rettime = ktime_get();
3242 delta = ktime_sub(rettime, calltime);
3243 duration = (unsigned long long)ktime_to_ns(delta) >> 10;
3244
3245 bt_dev_info(hdev, "Device setup in %llu usecs", duration);
3246
3247 return 0;
3248}
3249
3250static int btusb_mtk_shutdown(struct hci_dev *hdev)
3251{
3252 struct btmtk_hci_wmt_params wmt_params;
3253 u8 param = 0;
3254 int err;
3255
3256 /* Disable the device */
3257 wmt_params.op = BTMTK_WMT_FUNC_CTRL;
3258 wmt_params.flag = 0;
3259 wmt_params.dlen = sizeof(param);
3260 wmt_params.data = ¶m;
3261 wmt_params.status = NULL;
3262
3263 err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
3264 if (err < 0) {
3265 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
3266 return err;
3267 }
3268
3269 return 0;
3270}
3271
3272static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
3273{
3274 struct btusb_data *data = hci_get_drvdata(hdev);
3275 u16 handle = le16_to_cpu(hci_acl_hdr(skb)->handle);
3276 struct sk_buff *skb_cd;
3277
3278 switch (handle) {
3279 case 0xfc6f: /* Firmware dump from device */
3280 /* When the firmware hangs, the device can no longer
3281 * suspend and thus disable auto-suspend.
3282 */
3283 usb_disable_autosuspend(data->udev);
3284
3285 /* We need to forward the diagnostic packet to userspace daemon
3286 * for backward compatibility, so we have to clone the packet
3287 * extraly for the in-kernel coredump support.
3288 */
3289 skb_cd = skb_clone(skb, GFP_ATOMIC);
3290 if (skb_cd)
3291 btmtk_process_coredump(hdev, skb_cd);
3292
3293 fallthrough;
3294 case 0x05ff: /* Firmware debug logging 1 */
3295 case 0x05fe: /* Firmware debug logging 2 */
3296 return hci_recv_diag(hdev, skb);
3297 }
3298
3299 return hci_recv_frame(hdev, skb);
3300}
3301
3302#ifdef CONFIG_PM
3303/* Configure an out-of-band gpio as wake-up pin, if specified in device tree */
3304static int marvell_config_oob_wake(struct hci_dev *hdev)
3305{
3306 struct sk_buff *skb;
3307 struct btusb_data *data = hci_get_drvdata(hdev);
3308 struct device *dev = &data->udev->dev;
3309 u16 pin, gap, opcode;
3310 int ret;
3311 u8 cmd[5];
3312
3313 /* Move on if no wakeup pin specified */
3314 if (of_property_read_u16(dev->of_node, "marvell,wakeup-pin", &pin) ||
3315 of_property_read_u16(dev->of_node, "marvell,wakeup-gap-ms", &gap))
3316 return 0;
3317
3318 /* Vendor specific command to configure a GPIO as wake-up pin */
3319 opcode = hci_opcode_pack(0x3F, 0x59);
3320 cmd[0] = opcode & 0xFF;
3321 cmd[1] = opcode >> 8;
3322 cmd[2] = 2; /* length of parameters that follow */
3323 cmd[3] = pin;
3324 cmd[4] = gap; /* time in ms, for which wakeup pin should be asserted */
3325
3326 skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
3327 if (!skb) {
3328 bt_dev_err(hdev, "%s: No memory", __func__);
3329 return -ENOMEM;
3330 }
3331
3332 skb_put_data(skb, cmd, sizeof(cmd));
3333 hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
3334
3335 ret = btusb_send_frame(hdev, skb);
3336 if (ret) {
3337 bt_dev_err(hdev, "%s: configuration failed", __func__);
3338 kfree_skb(skb);
3339 return ret;
3340 }
3341
3342 return 0;
3343}
3344#endif
3345
3346static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
3347 const bdaddr_t *bdaddr)
3348{
3349 struct sk_buff *skb;
3350 u8 buf[8];
3351 long ret;
3352
3353 buf[0] = 0xfe;
3354 buf[1] = sizeof(bdaddr_t);
3355 memcpy(buf + 2, bdaddr, sizeof(bdaddr_t));
3356
3357 skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT);
3358 if (IS_ERR(skb)) {
3359 ret = PTR_ERR(skb);
3360 bt_dev_err(hdev, "changing Marvell device address failed (%ld)",
3361 ret);
3362 return ret;
3363 }
3364 kfree_skb(skb);
3365
3366 return 0;
3367}
3368
3369static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
3370 const bdaddr_t *bdaddr)
3371{
3372 struct sk_buff *skb;
3373 u8 buf[10];
3374 long ret;
3375
3376 buf[0] = 0x01;
3377 buf[1] = 0x01;
3378 buf[2] = 0x00;
3379 buf[3] = sizeof(bdaddr_t);
3380 memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
3381
3382 skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
3383 if (IS_ERR(skb)) {
3384 ret = PTR_ERR(skb);
3385 bt_dev_err(hdev, "Change address command failed (%ld)", ret);
3386 return ret;
3387 }
3388 kfree_skb(skb);
3389
3390 return 0;
3391}
3392
3393static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,
3394 const bdaddr_t *bdaddr)
3395{
3396 struct sk_buff *skb;
3397 u8 buf[6];
3398 long ret;
3399
3400 memcpy(buf, bdaddr, sizeof(bdaddr_t));
3401
3402 skb = __hci_cmd_sync_ev(hdev, 0xfc14, sizeof(buf), buf,
3403 HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
3404 if (IS_ERR(skb)) {
3405 ret = PTR_ERR(skb);
3406 bt_dev_err(hdev, "Change address command failed (%ld)", ret);
3407 return ret;
3408 }
3409 kfree_skb(skb);
3410
3411 return 0;
3412}
3413
3414#define QCA_MEMDUMP_ACL_HANDLE 0x2EDD
3415#define QCA_MEMDUMP_SIZE_MAX 0x100000
3416#define QCA_MEMDUMP_VSE_CLASS 0x01
3417#define QCA_MEMDUMP_MSG_TYPE 0x08
3418#define QCA_MEMDUMP_PKT_SIZE 248
3419#define QCA_LAST_SEQUENCE_NUM 0xffff
3420
3421struct qca_dump_hdr {
3422 u8 vse_class;
3423 u8 msg_type;
3424 __le16 seqno;
3425 u8 reserved;
3426 union {
3427 u8 data[0];
3428 struct {
3429 __le32 ram_dump_size;
3430 u8 data0[0];
3431 } __packed;
3432 };
3433} __packed;
3434
3435
3436static void btusb_dump_hdr_qca(struct hci_dev *hdev, struct sk_buff *skb)
3437{
3438 char buf[128];
3439 struct btusb_data *btdata = hci_get_drvdata(hdev);
3440
3441 snprintf(buf, sizeof(buf), "Controller Name: 0x%x\n",
3442 btdata->qca_dump.controller_id);
3443 skb_put_data(skb, buf, strlen(buf));
3444
3445 snprintf(buf, sizeof(buf), "Firmware Version: 0x%x\n",
3446 btdata->qca_dump.fw_version);
3447 skb_put_data(skb, buf, strlen(buf));
3448
3449 snprintf(buf, sizeof(buf), "Driver: %s\nVendor: qca\n",
3450 btusb_driver.name);
3451 skb_put_data(skb, buf, strlen(buf));
3452
3453 snprintf(buf, sizeof(buf), "VID: 0x%x\nPID:0x%x\n",
3454 btdata->qca_dump.id_vendor, btdata->qca_dump.id_product);
3455 skb_put_data(skb, buf, strlen(buf));
3456
3457 snprintf(buf, sizeof(buf), "Lmp Subversion: 0x%x\n",
3458 hdev->lmp_subver);
3459 skb_put_data(skb, buf, strlen(buf));
3460}
3461
3462static void btusb_coredump_qca(struct hci_dev *hdev)
3463{
3464 static const u8 param[] = { 0x26 };
3465 struct sk_buff *skb;
3466
3467 skb = __hci_cmd_sync(hdev, 0xfc0c, 1, param, HCI_CMD_TIMEOUT);
3468 if (IS_ERR(skb))
3469 bt_dev_err(hdev, "%s: triggle crash failed (%ld)", __func__, PTR_ERR(skb));
3470 kfree_skb(skb);
3471}
3472
3473/*
3474 * ==0: not a dump pkt.
3475 * < 0: fails to handle a dump pkt
3476 * > 0: otherwise.
3477 */
3478static int handle_dump_pkt_qca(struct hci_dev *hdev, struct sk_buff *skb)
3479{
3480 int ret = 1;
3481 u8 pkt_type;
3482 u8 *sk_ptr;
3483 unsigned int sk_len;
3484 u16 seqno;
3485 u32 dump_size;
3486
3487 struct hci_event_hdr *event_hdr;
3488 struct hci_acl_hdr *acl_hdr;
3489 struct qca_dump_hdr *dump_hdr;
3490 struct btusb_data *btdata = hci_get_drvdata(hdev);
3491 struct usb_device *udev = btdata->udev;
3492
3493 pkt_type = hci_skb_pkt_type(skb);
3494 sk_ptr = skb->data;
3495 sk_len = skb->len;
3496
3497 if (pkt_type == HCI_ACLDATA_PKT) {
3498 acl_hdr = hci_acl_hdr(skb);
3499 if (le16_to_cpu(acl_hdr->handle) != QCA_MEMDUMP_ACL_HANDLE)
3500 return 0;
3501 sk_ptr += HCI_ACL_HDR_SIZE;
3502 sk_len -= HCI_ACL_HDR_SIZE;
3503 event_hdr = (struct hci_event_hdr *)sk_ptr;
3504 } else {
3505 event_hdr = hci_event_hdr(skb);
3506 }
3507
3508 if ((event_hdr->evt != HCI_VENDOR_PKT)
3509 || (event_hdr->plen != (sk_len - HCI_EVENT_HDR_SIZE)))
3510 return 0;
3511
3512 sk_ptr += HCI_EVENT_HDR_SIZE;
3513 sk_len -= HCI_EVENT_HDR_SIZE;
3514
3515 dump_hdr = (struct qca_dump_hdr *)sk_ptr;
3516 if ((sk_len < offsetof(struct qca_dump_hdr, data))
3517 || (dump_hdr->vse_class != QCA_MEMDUMP_VSE_CLASS)
3518 || (dump_hdr->msg_type != QCA_MEMDUMP_MSG_TYPE))
3519 return 0;
3520
3521 /*it is dump pkt now*/
3522 seqno = le16_to_cpu(dump_hdr->seqno);
3523 if (seqno == 0) {
3524 set_bit(BTUSB_HW_SSR_ACTIVE, &btdata->flags);
3525 dump_size = le32_to_cpu(dump_hdr->ram_dump_size);
3526 if (!dump_size || (dump_size > QCA_MEMDUMP_SIZE_MAX)) {
3527 ret = -EILSEQ;
3528 bt_dev_err(hdev, "Invalid memdump size(%u)",
3529 dump_size);
3530 goto out;
3531 }
3532
3533 ret = hci_devcd_init(hdev, dump_size);
3534 if (ret < 0) {
3535 bt_dev_err(hdev, "memdump init error(%d)", ret);
3536 goto out;
3537 }
3538
3539 btdata->qca_dump.ram_dump_size = dump_size;
3540 btdata->qca_dump.ram_dump_seqno = 0;
3541 sk_ptr += offsetof(struct qca_dump_hdr, data0);
3542 sk_len -= offsetof(struct qca_dump_hdr, data0);
3543
3544 usb_disable_autosuspend(udev);
3545 bt_dev_info(hdev, "%s memdump size(%u)\n",
3546 (pkt_type == HCI_ACLDATA_PKT) ? "ACL" : "event",
3547 dump_size);
3548 } else {
3549 sk_ptr += offsetof(struct qca_dump_hdr, data);
3550 sk_len -= offsetof(struct qca_dump_hdr, data);
3551 }
3552
3553 if (!btdata->qca_dump.ram_dump_size) {
3554 ret = -EINVAL;
3555 bt_dev_err(hdev, "memdump is not active");
3556 goto out;
3557 }
3558
3559 if ((seqno > btdata->qca_dump.ram_dump_seqno + 1) && (seqno != QCA_LAST_SEQUENCE_NUM)) {
3560 dump_size = QCA_MEMDUMP_PKT_SIZE * (seqno - btdata->qca_dump.ram_dump_seqno - 1);
3561 hci_devcd_append_pattern(hdev, 0x0, dump_size);
3562 bt_dev_err(hdev,
3563 "expected memdump seqno(%u) is not received(%u)\n",
3564 btdata->qca_dump.ram_dump_seqno, seqno);
3565 btdata->qca_dump.ram_dump_seqno = seqno;
3566 kfree_skb(skb);
3567 return ret;
3568 }
3569
3570 skb_pull(skb, skb->len - sk_len);
3571 hci_devcd_append(hdev, skb);
3572 btdata->qca_dump.ram_dump_seqno++;
3573 if (seqno == QCA_LAST_SEQUENCE_NUM) {
3574 bt_dev_info(hdev,
3575 "memdump done: pkts(%u), total(%u)\n",
3576 btdata->qca_dump.ram_dump_seqno, btdata->qca_dump.ram_dump_size);
3577
3578 hci_devcd_complete(hdev);
3579 goto out;
3580 }
3581 return ret;
3582
3583out:
3584 if (btdata->qca_dump.ram_dump_size)
3585 usb_enable_autosuspend(udev);
3586 btdata->qca_dump.ram_dump_size = 0;
3587 btdata->qca_dump.ram_dump_seqno = 0;
3588 clear_bit(BTUSB_HW_SSR_ACTIVE, &btdata->flags);
3589
3590 if (ret < 0)
3591 kfree_skb(skb);
3592 return ret;
3593}
3594
3595static int btusb_recv_acl_qca(struct hci_dev *hdev, struct sk_buff *skb)
3596{
3597 if (handle_dump_pkt_qca(hdev, skb))
3598 return 0;
3599 return hci_recv_frame(hdev, skb);
3600}
3601
3602static int btusb_recv_evt_qca(struct hci_dev *hdev, struct sk_buff *skb)
3603{
3604 if (handle_dump_pkt_qca(hdev, skb))
3605 return 0;
3606 return hci_recv_frame(hdev, skb);
3607}
3608
3609
3610#define QCA_DFU_PACKET_LEN 4096
3611
3612#define QCA_GET_TARGET_VERSION 0x09
3613#define QCA_CHECK_STATUS 0x05
3614#define QCA_DFU_DOWNLOAD 0x01
3615
3616#define QCA_SYSCFG_UPDATED 0x40
3617#define QCA_PATCH_UPDATED 0x80
3618#define QCA_DFU_TIMEOUT 3000
3619#define QCA_FLAG_MULTI_NVM 0x80
3620#define QCA_BT_RESET_WAIT_MS 100
3621
3622#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
3623#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
3624
3625struct qca_version {
3626 __le32 rom_version;
3627 __le32 patch_version;
3628 __le32 ram_version;
3629 __u8 chip_id;
3630 __u8 platform_id;
3631 __le16 flag;
3632 __u8 reserved[4];
3633} __packed;
3634
3635struct qca_rampatch_version {
3636 __le16 rom_version_high;
3637 __le16 rom_version_low;
3638 __le16 patch_version;
3639} __packed;
3640
3641struct qca_device_info {
3642 u32 rom_version;
3643 u8 rampatch_hdr; /* length of header in rampatch */
3644 u8 nvm_hdr; /* length of header in NVM */
3645 u8 ver_offset; /* offset of version structure in rampatch */
3646};
3647
3648static const struct qca_device_info qca_devices_table[] = {
3649 { 0x00000100, 20, 4, 8 }, /* Rome 1.0 */
3650 { 0x00000101, 20, 4, 8 }, /* Rome 1.1 */
3651 { 0x00000200, 28, 4, 16 }, /* Rome 2.0 */
3652 { 0x00000201, 28, 4, 16 }, /* Rome 2.1 */
3653 { 0x00000300, 28, 4, 16 }, /* Rome 3.0 */
3654 { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
3655 { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
3656 { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
3657 { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
3658 { 0x00190200, 40, 4, 16 }, /* WCN785x 2.0 */
3659};
3660
3661static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request,
3662 void *data, u16 size)
3663{
3664 int pipe, err;
3665 u8 *buf;
3666
3667 buf = kmalloc(size, GFP_KERNEL);
3668 if (!buf)
3669 return -ENOMEM;
3670
3671 /* Found some of USB hosts have IOT issues with ours so that we should
3672 * not wait until HCI layer is ready.
3673 */
3674 pipe = usb_rcvctrlpipe(udev, 0);
3675 err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN,
3676 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
3677 if (err < 0) {
3678 dev_err(&udev->dev, "Failed to access otp area (%d)", err);
3679 goto done;
3680 }
3681
3682 memcpy(data, buf, size);
3683
3684done:
3685 kfree(buf);
3686
3687 return err;
3688}
3689
3690static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
3691 const struct firmware *firmware,
3692 size_t hdr_size)
3693{
3694 struct btusb_data *btdata = hci_get_drvdata(hdev);
3695 struct usb_device *udev = btdata->udev;
3696 size_t count, size, sent = 0;
3697 int pipe, len, err;
3698 u8 *buf;
3699
3700 buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL);
3701 if (!buf)
3702 return -ENOMEM;
3703
3704 count = firmware->size;
3705
3706 size = min_t(size_t, count, hdr_size);
3707 memcpy(buf, firmware->data, size);
3708
3709 /* USB patches should go down to controller through USB path
3710 * because binary format fits to go down through USB channel.
3711 * USB control path is for patching headers and USB bulk is for
3712 * patch body.
3713 */
3714 pipe = usb_sndctrlpipe(udev, 0);
3715 err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR,
3716 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
3717 if (err < 0) {
3718 bt_dev_err(hdev, "Failed to send headers (%d)", err);
3719 goto done;
3720 }
3721
3722 sent += size;
3723 count -= size;
3724
3725 /* ep2 need time to switch from function acl to function dfu,
3726 * so we add 20ms delay here.
3727 */
3728 msleep(20);
3729
3730 while (count) {
3731 size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
3732
3733 memcpy(buf, firmware->data + sent, size);
3734
3735 pipe = usb_sndbulkpipe(udev, 0x02);
3736 err = usb_bulk_msg(udev, pipe, buf, size, &len,
3737 QCA_DFU_TIMEOUT);
3738 if (err < 0) {
3739 bt_dev_err(hdev, "Failed to send body at %zd of %zd (%d)",
3740 sent, firmware->size, err);
3741 break;
3742 }
3743
3744 if (size != len) {
3745 bt_dev_err(hdev, "Failed to get bulk buffer");
3746 err = -EILSEQ;
3747 break;
3748 }
3749
3750 sent += size;
3751 count -= size;
3752 }
3753
3754done:
3755 kfree(buf);
3756 return err;
3757}
3758
3759static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
3760 struct qca_version *ver,
3761 const struct qca_device_info *info)
3762{
3763 struct qca_rampatch_version *rver;
3764 const struct firmware *fw;
3765 u32 ver_rom, ver_patch, rver_rom;
3766 u16 rver_rom_low, rver_rom_high, rver_patch;
3767 char fwname[64];
3768 int err;
3769
3770 ver_rom = le32_to_cpu(ver->rom_version);
3771 ver_patch = le32_to_cpu(ver->patch_version);
3772
3773 snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom);
3774
3775 err = request_firmware(&fw, fwname, &hdev->dev);
3776 if (err) {
3777 bt_dev_err(hdev, "failed to request rampatch file: %s (%d)",
3778 fwname, err);
3779 return err;
3780 }
3781
3782 bt_dev_info(hdev, "using rampatch file: %s", fwname);
3783
3784 rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
3785 rver_rom_low = le16_to_cpu(rver->rom_version_low);
3786 rver_patch = le16_to_cpu(rver->patch_version);
3787
3788 if (ver_rom & ~0xffffU) {
3789 rver_rom_high = le16_to_cpu(rver->rom_version_high);
3790 rver_rom = rver_rom_high << 16 | rver_rom_low;
3791 } else {
3792 rver_rom = rver_rom_low;
3793 }
3794
3795 bt_dev_info(hdev, "QCA: patch rome 0x%x build 0x%x, "
3796 "firmware rome 0x%x build 0x%x",
3797 rver_rom, rver_patch, ver_rom, ver_patch);
3798
3799 if (rver_rom != ver_rom || rver_patch <= ver_patch) {
3800 bt_dev_err(hdev, "rampatch file version did not match with firmware");
3801 err = -EINVAL;
3802 goto done;
3803 }
3804
3805 err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr);
3806
3807done:
3808 release_firmware(fw);
3809
3810 return err;
3811}
3812
3813static void btusb_generate_qca_nvm_name(char *fwname, size_t max_size,
3814 const struct qca_version *ver)
3815{
3816 u32 rom_version = le32_to_cpu(ver->rom_version);
3817 u16 flag = le16_to_cpu(ver->flag);
3818
3819 if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
3820 /* The board_id should be split into two bytes
3821 * The 1st byte is chip ID, and the 2nd byte is platform ID
3822 * For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID
3823 * we have several platforms, and platform IDs are continuously added
3824 * Platform ID:
3825 * 0x00 is for Mobile
3826 * 0x01 is for X86
3827 * 0x02 is for Automotive
3828 * 0x03 is for Consumer electronic
3829 */
3830 u16 board_id = (ver->chip_id << 8) + ver->platform_id;
3831 const char *variant;
3832
3833 switch (le32_to_cpu(ver->ram_version)) {
3834 case WCN6855_2_0_RAM_VERSION_GF:
3835 case WCN6855_2_1_RAM_VERSION_GF:
3836 variant = "_gf";
3837 break;
3838 default:
3839 variant = "";
3840 break;
3841 }
3842
3843 if (board_id == 0) {
3844 snprintf(fwname, max_size, "qca/nvm_usb_%08x%s.bin",
3845 rom_version, variant);
3846 } else {
3847 snprintf(fwname, max_size, "qca/nvm_usb_%08x%s_%04x.bin",
3848 rom_version, variant, board_id);
3849 }
3850 } else {
3851 snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin",
3852 rom_version);
3853 }
3854
3855}
3856
3857static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
3858 struct qca_version *ver,
3859 const struct qca_device_info *info)
3860{
3861 const struct firmware *fw;
3862 char fwname[64];
3863 int err;
3864
3865 btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver);
3866
3867 err = request_firmware(&fw, fwname, &hdev->dev);
3868 if (err) {
3869 bt_dev_err(hdev, "failed to request NVM file: %s (%d)",
3870 fwname, err);
3871 return err;
3872 }
3873
3874 bt_dev_info(hdev, "using NVM file: %s", fwname);
3875
3876 err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
3877
3878 release_firmware(fw);
3879
3880 return err;
3881}
3882
3883/* identify the ROM version and check whether patches are needed */
3884static bool btusb_qca_need_patch(struct usb_device *udev)
3885{
3886 struct qca_version ver;
3887
3888 if (btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver,
3889 sizeof(ver)) < 0)
3890 return false;
3891 /* only low ROM versions need patches */
3892 return !(le32_to_cpu(ver.rom_version) & ~0xffffU);
3893}
3894
3895static int btusb_setup_qca(struct hci_dev *hdev)
3896{
3897 struct btusb_data *btdata = hci_get_drvdata(hdev);
3898 struct usb_device *udev = btdata->udev;
3899 const struct qca_device_info *info = NULL;
3900 struct qca_version ver;
3901 u32 ver_rom;
3902 u8 status;
3903 int i, err;
3904
3905 err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver,
3906 sizeof(ver));
3907 if (err < 0)
3908 return err;
3909
3910 ver_rom = le32_to_cpu(ver.rom_version);
3911
3912 for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
3913 if (ver_rom == qca_devices_table[i].rom_version)
3914 info = &qca_devices_table[i];
3915 }
3916 if (!info) {
3917 /* If the rom_version is not matched in the qca_devices_table
3918 * and the high ROM version is not zero, we assume this chip no
3919 * need to load the rampatch and nvm.
3920 */
3921 if (ver_rom & ~0xffffU)
3922 return 0;
3923
3924 bt_dev_err(hdev, "don't support firmware rome 0x%x", ver_rom);
3925 return -ENODEV;
3926 }
3927
3928 err = btusb_qca_send_vendor_req(udev, QCA_CHECK_STATUS, &status,
3929 sizeof(status));
3930 if (err < 0)
3931 return err;
3932
3933 if (!(status & QCA_PATCH_UPDATED)) {
3934 err = btusb_setup_qca_load_rampatch(hdev, &ver, info);
3935 if (err < 0)
3936 return err;
3937 }
3938
3939 err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver,
3940 sizeof(ver));
3941 if (err < 0)
3942 return err;
3943
3944 btdata->qca_dump.fw_version = le32_to_cpu(ver.patch_version);
3945 btdata->qca_dump.controller_id = le32_to_cpu(ver.rom_version);
3946
3947 if (!(status & QCA_SYSCFG_UPDATED)) {
3948 err = btusb_setup_qca_load_nvm(hdev, &ver, info);
3949 if (err < 0)
3950 return err;
3951
3952 /* WCN6855 2.1 and later will reset to apply firmware downloaded here, so
3953 * wait ~100ms for reset Done then go ahead, otherwise, it maybe
3954 * cause potential enable failure.
3955 */
3956 if (info->rom_version >= 0x00130201)
3957 msleep(QCA_BT_RESET_WAIT_MS);
3958 }
3959
3960 /* Mark HCI_OP_ENHANCED_SETUP_SYNC_CONN as broken as it doesn't seem to
3961 * work with the likes of HSP/HFP mSBC.
3962 */
3963 set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
3964
3965 return 0;
3966}
3967
3968static inline int __set_diag_interface(struct hci_dev *hdev)
3969{
3970 struct btusb_data *data = hci_get_drvdata(hdev);
3971 struct usb_interface *intf = data->diag;
3972 int i;
3973
3974 if (!data->diag)
3975 return -ENODEV;
3976
3977 data->diag_tx_ep = NULL;
3978 data->diag_rx_ep = NULL;
3979
3980 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
3981 struct usb_endpoint_descriptor *ep_desc;
3982
3983 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
3984
3985 if (!data->diag_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
3986 data->diag_tx_ep = ep_desc;
3987 continue;
3988 }
3989
3990 if (!data->diag_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
3991 data->diag_rx_ep = ep_desc;
3992 continue;
3993 }
3994 }
3995
3996 if (!data->diag_tx_ep || !data->diag_rx_ep) {
3997 bt_dev_err(hdev, "invalid diagnostic descriptors");
3998 return -ENODEV;
3999 }
4000
4001 return 0;
4002}
4003
4004static struct urb *alloc_diag_urb(struct hci_dev *hdev, bool enable)
4005{
4006 struct btusb_data *data = hci_get_drvdata(hdev);
4007 struct sk_buff *skb;
4008 struct urb *urb;
4009 unsigned int pipe;
4010
4011 if (!data->diag_tx_ep)
4012 return ERR_PTR(-ENODEV);
4013
4014 urb = usb_alloc_urb(0, GFP_KERNEL);
4015 if (!urb)
4016 return ERR_PTR(-ENOMEM);
4017
4018 skb = bt_skb_alloc(2, GFP_KERNEL);
4019 if (!skb) {
4020 usb_free_urb(urb);
4021 return ERR_PTR(-ENOMEM);
4022 }
4023
4024 skb_put_u8(skb, 0xf0);
4025 skb_put_u8(skb, enable);
4026
4027 pipe = usb_sndbulkpipe(data->udev, data->diag_tx_ep->bEndpointAddress);
4028
4029 usb_fill_bulk_urb(urb, data->udev, pipe,
4030 skb->data, skb->len, btusb_tx_complete, skb);
4031
4032 skb->dev = (void *)hdev;
4033
4034 return urb;
4035}
4036
4037static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable)
4038{
4039 struct btusb_data *data = hci_get_drvdata(hdev);
4040 struct urb *urb;
4041
4042 if (!data->diag)
4043 return -ENODEV;
4044
4045 if (!test_bit(HCI_RUNNING, &hdev->flags))
4046 return -ENETDOWN;
4047
4048 urb = alloc_diag_urb(hdev, enable);
4049 if (IS_ERR(urb))
4050 return PTR_ERR(urb);
4051
4052 return submit_or_queue_tx_urb(hdev, urb);
4053}
4054
4055#ifdef CONFIG_PM
4056static irqreturn_t btusb_oob_wake_handler(int irq, void *priv)
4057{
4058 struct btusb_data *data = priv;
4059
4060 pm_wakeup_event(&data->udev->dev, 0);
4061 pm_system_wakeup();
4062
4063 /* Disable only if not already disabled (keep it balanced) */
4064 if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {
4065 disable_irq_nosync(irq);
4066 disable_irq_wake(irq);
4067 }
4068 return IRQ_HANDLED;
4069}
4070
4071static const struct of_device_id btusb_match_table[] = {
4072 { .compatible = "usb1286,204e" },
4073 { .compatible = "usbcf3,e300" }, /* QCA6174A */
4074 { .compatible = "usb4ca,301a" }, /* QCA6174A (Lite-On) */
4075 { }
4076};
4077MODULE_DEVICE_TABLE(of, btusb_match_table);
4078
4079/* Use an oob wakeup pin? */
4080static int btusb_config_oob_wake(struct hci_dev *hdev)
4081{
4082 struct btusb_data *data = hci_get_drvdata(hdev);
4083 struct device *dev = &data->udev->dev;
4084 int irq, ret;
4085
4086 clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags);
4087
4088 if (!of_match_device(btusb_match_table, dev))
4089 return 0;
4090
4091 /* Move on if no IRQ specified */
4092 irq = of_irq_get_byname(dev->of_node, "wakeup");
4093 if (irq <= 0) {
4094 bt_dev_dbg(hdev, "%s: no OOB Wakeup IRQ in DT", __func__);
4095 return 0;
4096 }
4097
4098 irq_set_status_flags(irq, IRQ_NOAUTOEN);
4099 ret = devm_request_irq(&hdev->dev, irq, btusb_oob_wake_handler,
4100 0, "OOB Wake-on-BT", data);
4101 if (ret) {
4102 bt_dev_err(hdev, "%s: IRQ request failed", __func__);
4103 return ret;
4104 }
4105
4106 ret = device_init_wakeup(dev, true);
4107 if (ret) {
4108 bt_dev_err(hdev, "%s: failed to init_wakeup", __func__);
4109 return ret;
4110 }
4111
4112 data->oob_wake_irq = irq;
4113 bt_dev_info(hdev, "OOB Wake-on-BT configured at IRQ %u", irq);
4114 return 0;
4115}
4116#endif
4117
4118static void btusb_check_needs_reset_resume(struct usb_interface *intf)
4119{
4120 if (dmi_check_system(btusb_needs_reset_resume_table))
4121 interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
4122}
4123
4124static bool btusb_wakeup(struct hci_dev *hdev)
4125{
4126 struct btusb_data *data = hci_get_drvdata(hdev);
4127
4128 return device_may_wakeup(&data->udev->dev);
4129}
4130
4131static int btusb_shutdown_qca(struct hci_dev *hdev)
4132{
4133 struct sk_buff *skb;
4134
4135 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
4136 if (IS_ERR(skb)) {
4137 bt_dev_err(hdev, "HCI reset during shutdown failed");
4138 return PTR_ERR(skb);
4139 }
4140 kfree_skb(skb);
4141
4142 return 0;
4143}
4144
4145static ssize_t force_poll_sync_read(struct file *file, char __user *user_buf,
4146 size_t count, loff_t *ppos)
4147{
4148 struct btusb_data *data = file->private_data;
4149 char buf[3];
4150
4151 buf[0] = data->poll_sync ? 'Y' : 'N';
4152 buf[1] = '\n';
4153 buf[2] = '\0';
4154 return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
4155}
4156
4157static ssize_t force_poll_sync_write(struct file *file,
4158 const char __user *user_buf,
4159 size_t count, loff_t *ppos)
4160{
4161 struct btusb_data *data = file->private_data;
4162 bool enable;
4163 int err;
4164
4165 err = kstrtobool_from_user(user_buf, count, &enable);
4166 if (err)
4167 return err;
4168
4169 /* Only allow changes while the adapter is down */
4170 if (test_bit(HCI_UP, &data->hdev->flags))
4171 return -EPERM;
4172
4173 if (data->poll_sync == enable)
4174 return -EALREADY;
4175
4176 data->poll_sync = enable;
4177
4178 return count;
4179}
4180
4181static const struct file_operations force_poll_sync_fops = {
4182 .open = simple_open,
4183 .read = force_poll_sync_read,
4184 .write = force_poll_sync_write,
4185 .llseek = default_llseek,
4186};
4187
4188static int btusb_probe(struct usb_interface *intf,
4189 const struct usb_device_id *id)
4190{
4191 struct usb_endpoint_descriptor *ep_desc;
4192 struct gpio_desc *reset_gpio;
4193 struct btusb_data *data;
4194 struct hci_dev *hdev;
4195 unsigned ifnum_base;
4196 int i, err, priv_size;
4197
4198 BT_DBG("intf %p id %p", intf, id);
4199
4200 if ((id->driver_info & BTUSB_IFNUM_2) &&
4201 (intf->cur_altsetting->desc.bInterfaceNumber != 0) &&
4202 (intf->cur_altsetting->desc.bInterfaceNumber != 2))
4203 return -ENODEV;
4204
4205 ifnum_base = intf->cur_altsetting->desc.bInterfaceNumber;
4206
4207 if (!id->driver_info) {
4208 const struct usb_device_id *match;
4209
4210 match = usb_match_id(intf, quirks_table);
4211 if (match)
4212 id = match;
4213 }
4214
4215 if (id->driver_info == BTUSB_IGNORE)
4216 return -ENODEV;
4217
4218 if (id->driver_info & BTUSB_ATH3012) {
4219 struct usb_device *udev = interface_to_usbdev(intf);
4220
4221 /* Old firmware would otherwise let ath3k driver load
4222 * patch and sysconfig files
4223 */
4224 if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001 &&
4225 !btusb_qca_need_patch(udev))
4226 return -ENODEV;
4227 }
4228
4229 data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
4230 if (!data)
4231 return -ENOMEM;
4232
4233 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
4234 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
4235
4236 if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) {
4237 data->intr_ep = ep_desc;
4238 continue;
4239 }
4240
4241 if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
4242 data->bulk_tx_ep = ep_desc;
4243 continue;
4244 }
4245
4246 if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
4247 data->bulk_rx_ep = ep_desc;
4248 continue;
4249 }
4250 }
4251
4252 if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep)
4253 return -ENODEV;
4254
4255 if (id->driver_info & BTUSB_AMP) {
4256 data->cmdreq_type = USB_TYPE_CLASS | 0x01;
4257 data->cmdreq = 0x2b;
4258 } else {
4259 data->cmdreq_type = USB_TYPE_CLASS;
4260 data->cmdreq = 0x00;
4261 }
4262
4263 data->udev = interface_to_usbdev(intf);
4264 data->intf = intf;
4265
4266 INIT_WORK(&data->work, btusb_work);
4267 INIT_WORK(&data->waker, btusb_waker);
4268 INIT_DELAYED_WORK(&data->rx_work, btusb_rx_work);
4269
4270 skb_queue_head_init(&data->acl_q);
4271
4272 init_usb_anchor(&data->deferred);
4273 init_usb_anchor(&data->tx_anchor);
4274 spin_lock_init(&data->txlock);
4275
4276 init_usb_anchor(&data->intr_anchor);
4277 init_usb_anchor(&data->bulk_anchor);
4278 init_usb_anchor(&data->isoc_anchor);
4279 init_usb_anchor(&data->diag_anchor);
4280 init_usb_anchor(&data->ctrl_anchor);
4281 spin_lock_init(&data->rxlock);
4282
4283 priv_size = 0;
4284
4285 data->recv_event = hci_recv_frame;
4286 data->recv_bulk = btusb_recv_bulk;
4287
4288 if (id->driver_info & BTUSB_INTEL_COMBINED) {
4289 /* Allocate extra space for Intel device */
4290 priv_size += sizeof(struct btintel_data);
4291
4292 /* Override the rx handlers */
4293 data->recv_event = btintel_recv_event;
4294 data->recv_bulk = btusb_recv_bulk_intel;
4295 } else if (id->driver_info & BTUSB_REALTEK) {
4296 /* Allocate extra space for Realtek device */
4297 priv_size += sizeof(struct btrealtek_data);
4298
4299 data->recv_event = btusb_recv_event_realtek;
4300 } else if (id->driver_info & BTUSB_MEDIATEK) {
4301 /* Allocate extra space for Mediatek device */
4302 priv_size += sizeof(struct btmediatek_data);
4303 }
4304
4305 data->recv_acl = hci_recv_frame;
4306
4307 hdev = hci_alloc_dev_priv(priv_size);
4308 if (!hdev)
4309 return -ENOMEM;
4310
4311 hdev->bus = HCI_USB;
4312 hci_set_drvdata(hdev, data);
4313
4314 if (id->driver_info & BTUSB_AMP)
4315 hdev->dev_type = HCI_AMP;
4316 else
4317 hdev->dev_type = HCI_PRIMARY;
4318
4319 data->hdev = hdev;
4320
4321 SET_HCIDEV_DEV(hdev, &intf->dev);
4322
4323 reset_gpio = gpiod_get_optional(&data->udev->dev, "reset",
4324 GPIOD_OUT_LOW);
4325 if (IS_ERR(reset_gpio)) {
4326 err = PTR_ERR(reset_gpio);
4327 goto out_free_dev;
4328 } else if (reset_gpio) {
4329 data->reset_gpio = reset_gpio;
4330 }
4331
4332 hdev->open = btusb_open;
4333 hdev->close = btusb_close;
4334 hdev->flush = btusb_flush;
4335 hdev->send = btusb_send_frame;
4336 hdev->notify = btusb_notify;
4337 hdev->wakeup = btusb_wakeup;
4338
4339#ifdef CONFIG_PM
4340 err = btusb_config_oob_wake(hdev);
4341 if (err)
4342 goto out_free_dev;
4343
4344 /* Marvell devices may need a specific chip configuration */
4345 if (id->driver_info & BTUSB_MARVELL && data->oob_wake_irq) {
4346 err = marvell_config_oob_wake(hdev);
4347 if (err)
4348 goto out_free_dev;
4349 }
4350#endif
4351 if (id->driver_info & BTUSB_CW6622)
4352 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
4353
4354 if (id->driver_info & BTUSB_BCM2045)
4355 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
4356
4357 if (id->driver_info & BTUSB_BCM92035)
4358 hdev->setup = btusb_setup_bcm92035;
4359
4360 if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) &&
4361 (id->driver_info & BTUSB_BCM_PATCHRAM)) {
4362 hdev->manufacturer = 15;
4363 hdev->setup = btbcm_setup_patchram;
4364 hdev->set_diag = btusb_bcm_set_diag;
4365 hdev->set_bdaddr = btbcm_set_bdaddr;
4366
4367 /* Broadcom LM_DIAG Interface numbers are hardcoded */
4368 data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
4369 }
4370
4371 if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) &&
4372 (id->driver_info & BTUSB_BCM_APPLE)) {
4373 hdev->manufacturer = 15;
4374 hdev->setup = btbcm_setup_apple;
4375 hdev->set_diag = btusb_bcm_set_diag;
4376
4377 /* Broadcom LM_DIAG Interface numbers are hardcoded */
4378 data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
4379 }
4380
4381 /* Combined Intel Device setup to support multiple setup routine */
4382 if (id->driver_info & BTUSB_INTEL_COMBINED) {
4383 err = btintel_configure_setup(hdev, btusb_driver.name);
4384 if (err)
4385 goto out_free_dev;
4386
4387 /* Transport specific configuration */
4388 hdev->send = btusb_send_frame_intel;
4389 hdev->cmd_timeout = btusb_intel_cmd_timeout;
4390
4391 if (id->driver_info & BTUSB_INTEL_NO_WBS_SUPPORT)
4392 btintel_set_flag(hdev, INTEL_ROM_LEGACY_NO_WBS_SUPPORT);
4393
4394 if (id->driver_info & BTUSB_INTEL_BROKEN_INITIAL_NCMD)
4395 btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD);
4396
4397 if (id->driver_info & BTUSB_INTEL_BROKEN_SHUTDOWN_LED)
4398 btintel_set_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED);
4399 }
4400
4401 if (id->driver_info & BTUSB_MARVELL)
4402 hdev->set_bdaddr = btusb_set_bdaddr_marvell;
4403
4404 if (IS_ENABLED(CONFIG_BT_HCIBTUSB_MTK) &&
4405 (id->driver_info & BTUSB_MEDIATEK)) {
4406 hdev->setup = btusb_mtk_setup;
4407 hdev->shutdown = btusb_mtk_shutdown;
4408 hdev->manufacturer = 70;
4409 hdev->cmd_timeout = btmtk_reset_sync;
4410 hdev->set_bdaddr = btmtk_set_bdaddr;
4411 set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
4412 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
4413 data->recv_acl = btusb_recv_acl_mtk;
4414 }
4415
4416 if (id->driver_info & BTUSB_SWAVE) {
4417 set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
4418 set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
4419 }
4420
4421 if (id->driver_info & BTUSB_INTEL_BOOT) {
4422 hdev->manufacturer = 2;
4423 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
4424 }
4425
4426 if (id->driver_info & BTUSB_ATH3012) {
4427 data->setup_on_usb = btusb_setup_qca;
4428 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
4429 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
4430 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
4431 }
4432
4433 if (id->driver_info & BTUSB_QCA_ROME) {
4434 data->setup_on_usb = btusb_setup_qca;
4435 hdev->shutdown = btusb_shutdown_qca;
4436 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
4437 hdev->cmd_timeout = btusb_qca_cmd_timeout;
4438 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
4439 btusb_check_needs_reset_resume(intf);
4440 }
4441
4442 if (id->driver_info & BTUSB_QCA_WCN6855) {
4443 data->qca_dump.id_vendor = id->idVendor;
4444 data->qca_dump.id_product = id->idProduct;
4445 data->recv_event = btusb_recv_evt_qca;
4446 data->recv_acl = btusb_recv_acl_qca;
4447 hci_devcd_register(hdev, btusb_coredump_qca, btusb_dump_hdr_qca, NULL);
4448 data->setup_on_usb = btusb_setup_qca;
4449 hdev->shutdown = btusb_shutdown_qca;
4450 hdev->set_bdaddr = btusb_set_bdaddr_wcn6855;
4451 hdev->cmd_timeout = btusb_qca_cmd_timeout;
4452 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
4453 hci_set_msft_opcode(hdev, 0xFD70);
4454 }
4455
4456 if (id->driver_info & BTUSB_AMP) {
4457 /* AMP controllers do not support SCO packets */
4458 data->isoc = NULL;
4459 } else {
4460 /* Interface orders are hardcoded in the specification */
4461 data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
4462 data->isoc_ifnum = ifnum_base + 1;
4463 }
4464
4465 if (IS_ENABLED(CONFIG_BT_HCIBTUSB_RTL) &&
4466 (id->driver_info & BTUSB_REALTEK)) {
4467 btrtl_set_driver_name(hdev, btusb_driver.name);
4468 hdev->setup = btusb_setup_realtek;
4469 hdev->shutdown = btrtl_shutdown_realtek;
4470 hdev->cmd_timeout = btusb_rtl_cmd_timeout;
4471 hdev->hw_error = btusb_rtl_hw_error;
4472
4473 /* Realtek devices need to set remote wakeup on auto-suspend */
4474 set_bit(BTUSB_WAKEUP_AUTOSUSPEND, &data->flags);
4475 set_bit(BTUSB_USE_ALT3_FOR_WBS, &data->flags);
4476 }
4477
4478 if (id->driver_info & BTUSB_ACTIONS_SEMI) {
4479 /* Support is advertised, but not implemented */
4480 set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
4481 set_bit(HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, &hdev->quirks);
4482 set_bit(HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT, &hdev->quirks);
4483 set_bit(HCI_QUIRK_BROKEN_EXT_SCAN, &hdev->quirks);
4484 }
4485
4486 if (!reset)
4487 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
4488
4489 if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
4490 if (!disable_scofix)
4491 set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
4492 }
4493
4494 if (id->driver_info & BTUSB_BROKEN_ISOC)
4495 data->isoc = NULL;
4496
4497 if (id->driver_info & BTUSB_WIDEBAND_SPEECH)
4498 set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
4499
4500 if (id->driver_info & BTUSB_VALID_LE_STATES)
4501 set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
4502
4503 if (id->driver_info & BTUSB_DIGIANSWER) {
4504 data->cmdreq_type = USB_TYPE_VENDOR;
4505 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
4506 }
4507
4508 if (id->driver_info & BTUSB_CSR) {
4509 struct usb_device *udev = data->udev;
4510 u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
4511
4512 /* Old firmware would otherwise execute USB reset */
4513 if (bcdDevice < 0x117)
4514 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
4515
4516 /* This must be set first in case we disable it for fakes */
4517 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
4518
4519 /* Fake CSR devices with broken commands */
4520 if (le16_to_cpu(udev->descriptor.idVendor) == 0x0a12 &&
4521 le16_to_cpu(udev->descriptor.idProduct) == 0x0001)
4522 hdev->setup = btusb_setup_csr;
4523 }
4524
4525 if (id->driver_info & BTUSB_SNIFFER) {
4526 struct usb_device *udev = data->udev;
4527
4528 /* New sniffer firmware has crippled HCI interface */
4529 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
4530 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
4531 }
4532
4533 if (id->driver_info & BTUSB_INTEL_BOOT) {
4534 /* A bug in the bootloader causes that interrupt interface is
4535 * only enabled after receiving SetInterface(0, AltSetting=0).
4536 */
4537 err = usb_set_interface(data->udev, 0, 0);
4538 if (err < 0) {
4539 BT_ERR("failed to set interface 0, alt 0 %d", err);
4540 goto out_free_dev;
4541 }
4542 }
4543
4544 if (data->isoc) {
4545 err = usb_driver_claim_interface(&btusb_driver,
4546 data->isoc, data);
4547 if (err < 0)
4548 goto out_free_dev;
4549 }
4550
4551 if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && data->diag) {
4552 if (!usb_driver_claim_interface(&btusb_driver,
4553 data->diag, data))
4554 __set_diag_interface(hdev);
4555 else
4556 data->diag = NULL;
4557 }
4558
4559 if (enable_autosuspend)
4560 usb_enable_autosuspend(data->udev);
4561
4562 data->poll_sync = enable_poll_sync;
4563
4564 err = hci_register_dev(hdev);
4565 if (err < 0)
4566 goto out_free_dev;
4567
4568 usb_set_intfdata(intf, data);
4569
4570 debugfs_create_file("force_poll_sync", 0644, hdev->debugfs, data,
4571 &force_poll_sync_fops);
4572
4573 return 0;
4574
4575out_free_dev:
4576 if (data->reset_gpio)
4577 gpiod_put(data->reset_gpio);
4578 hci_free_dev(hdev);
4579 return err;
4580}
4581
4582static void btusb_disconnect(struct usb_interface *intf)
4583{
4584 struct btusb_data *data = usb_get_intfdata(intf);
4585 struct hci_dev *hdev;
4586
4587 BT_DBG("intf %p", intf);
4588
4589 if (!data)
4590 return;
4591
4592 hdev = data->hdev;
4593 usb_set_intfdata(data->intf, NULL);
4594
4595 if (data->isoc)
4596 usb_set_intfdata(data->isoc, NULL);
4597
4598 if (data->diag)
4599 usb_set_intfdata(data->diag, NULL);
4600
4601 hci_unregister_dev(hdev);
4602
4603 if (intf == data->intf) {
4604 if (data->isoc)
4605 usb_driver_release_interface(&btusb_driver, data->isoc);
4606 if (data->diag)
4607 usb_driver_release_interface(&btusb_driver, data->diag);
4608 } else if (intf == data->isoc) {
4609 if (data->diag)
4610 usb_driver_release_interface(&btusb_driver, data->diag);
4611 usb_driver_release_interface(&btusb_driver, data->intf);
4612 } else if (intf == data->diag) {
4613 usb_driver_release_interface(&btusb_driver, data->intf);
4614 if (data->isoc)
4615 usb_driver_release_interface(&btusb_driver, data->isoc);
4616 }
4617
4618 if (data->oob_wake_irq)
4619 device_init_wakeup(&data->udev->dev, false);
4620
4621 if (data->reset_gpio)
4622 gpiod_put(data->reset_gpio);
4623
4624 hci_free_dev(hdev);
4625}
4626
4627#ifdef CONFIG_PM
4628static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
4629{
4630 struct btusb_data *data = usb_get_intfdata(intf);
4631
4632 BT_DBG("intf %p", intf);
4633
4634 /* Don't suspend if there are connections */
4635 if (hci_conn_count(data->hdev))
4636 return -EBUSY;
4637
4638 if (data->suspend_count++)
4639 return 0;
4640
4641 spin_lock_irq(&data->txlock);
4642 if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) {
4643 set_bit(BTUSB_SUSPENDING, &data->flags);
4644 spin_unlock_irq(&data->txlock);
4645 } else {
4646 spin_unlock_irq(&data->txlock);
4647 data->suspend_count--;
4648 return -EBUSY;
4649 }
4650
4651 cancel_work_sync(&data->work);
4652
4653 btusb_stop_traffic(data);
4654 usb_kill_anchored_urbs(&data->tx_anchor);
4655
4656 if (data->oob_wake_irq && device_may_wakeup(&data->udev->dev)) {
4657 set_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags);
4658 enable_irq_wake(data->oob_wake_irq);
4659 enable_irq(data->oob_wake_irq);
4660 }
4661
4662 /* For global suspend, Realtek devices lose the loaded fw
4663 * in them. But for autosuspend, firmware should remain.
4664 * Actually, it depends on whether the usb host sends
4665 * set feature (enable wakeup) or not.
4666 */
4667 if (test_bit(BTUSB_WAKEUP_AUTOSUSPEND, &data->flags)) {
4668 if (PMSG_IS_AUTO(message) &&
4669 device_can_wakeup(&data->udev->dev))
4670 data->udev->do_remote_wakeup = 1;
4671 else if (!PMSG_IS_AUTO(message) &&
4672 !device_may_wakeup(&data->udev->dev)) {
4673 data->udev->do_remote_wakeup = 0;
4674 data->udev->reset_resume = 1;
4675 }
4676 }
4677
4678 return 0;
4679}
4680
4681static void play_deferred(struct btusb_data *data)
4682{
4683 struct urb *urb;
4684 int err;
4685
4686 while ((urb = usb_get_from_anchor(&data->deferred))) {
4687 usb_anchor_urb(urb, &data->tx_anchor);
4688
4689 err = usb_submit_urb(urb, GFP_ATOMIC);
4690 if (err < 0) {
4691 if (err != -EPERM && err != -ENODEV)
4692 BT_ERR("%s urb %p submission failed (%d)",
4693 data->hdev->name, urb, -err);
4694 kfree(urb->setup_packet);
4695 usb_unanchor_urb(urb);
4696 usb_free_urb(urb);
4697 break;
4698 }
4699
4700 data->tx_in_flight++;
4701 usb_free_urb(urb);
4702 }
4703
4704 /* Cleanup the rest deferred urbs. */
4705 while ((urb = usb_get_from_anchor(&data->deferred))) {
4706 kfree(urb->setup_packet);
4707 usb_free_urb(urb);
4708 }
4709}
4710
4711static int btusb_resume(struct usb_interface *intf)
4712{
4713 struct btusb_data *data = usb_get_intfdata(intf);
4714 struct hci_dev *hdev = data->hdev;
4715 int err = 0;
4716
4717 BT_DBG("intf %p", intf);
4718
4719 if (--data->suspend_count)
4720 return 0;
4721
4722 /* Disable only if not already disabled (keep it balanced) */
4723 if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {
4724 disable_irq(data->oob_wake_irq);
4725 disable_irq_wake(data->oob_wake_irq);
4726 }
4727
4728 if (!test_bit(HCI_RUNNING, &hdev->flags))
4729 goto done;
4730
4731 if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) {
4732 err = btusb_submit_intr_urb(hdev, GFP_NOIO);
4733 if (err < 0) {
4734 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
4735 goto failed;
4736 }
4737 }
4738
4739 if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) {
4740 err = btusb_submit_bulk_urb(hdev, GFP_NOIO);
4741 if (err < 0) {
4742 clear_bit(BTUSB_BULK_RUNNING, &data->flags);
4743 goto failed;
4744 }
4745
4746 btusb_submit_bulk_urb(hdev, GFP_NOIO);
4747 }
4748
4749 if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
4750 if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0)
4751 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
4752 else
4753 btusb_submit_isoc_urb(hdev, GFP_NOIO);
4754 }
4755
4756 spin_lock_irq(&data->txlock);
4757 play_deferred(data);
4758 clear_bit(BTUSB_SUSPENDING, &data->flags);
4759 spin_unlock_irq(&data->txlock);
4760 schedule_work(&data->work);
4761
4762 return 0;
4763
4764failed:
4765 usb_scuttle_anchored_urbs(&data->deferred);
4766done:
4767 spin_lock_irq(&data->txlock);
4768 clear_bit(BTUSB_SUSPENDING, &data->flags);
4769 spin_unlock_irq(&data->txlock);
4770
4771 return err;
4772}
4773#endif
4774
4775#ifdef CONFIG_DEV_COREDUMP
4776static void btusb_coredump(struct device *dev)
4777{
4778 struct btusb_data *data = dev_get_drvdata(dev);
4779 struct hci_dev *hdev = data->hdev;
4780
4781 if (hdev->dump.coredump)
4782 hdev->dump.coredump(hdev);
4783}
4784#endif
4785
4786static struct usb_driver btusb_driver = {
4787 .name = "btusb",
4788 .probe = btusb_probe,
4789 .disconnect = btusb_disconnect,
4790#ifdef CONFIG_PM
4791 .suspend = btusb_suspend,
4792 .resume = btusb_resume,
4793#endif
4794 .id_table = btusb_table,
4795 .supports_autosuspend = 1,
4796 .disable_hub_initiated_lpm = 1,
4797
4798#ifdef CONFIG_DEV_COREDUMP
4799 .driver = {
4800 .coredump = btusb_coredump,
4801 },
4802#endif
4803};
4804
4805module_usb_driver(btusb_driver);
4806
4807module_param(disable_scofix, bool, 0644);
4808MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
4809
4810module_param(force_scofix, bool, 0644);
4811MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
4812
4813module_param(enable_autosuspend, bool, 0644);
4814MODULE_PARM_DESC(enable_autosuspend, "Enable USB autosuspend by default");
4815
4816module_param(reset, bool, 0644);
4817MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
4818
4819MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
4820MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION);
4821MODULE_VERSION(VERSION);
4822MODULE_LICENSE("GPL");