Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2/****************************************************************************/
3
4/*
5 * mcfintc.h -- support definitions for the simple ColdFire
6 * Interrupt Controller
7 *
8 * (C) Copyright 2009, Greg Ungerer <gerg@uclinux.org>
9 */
10
11/****************************************************************************/
12#ifndef mcfintc_h
13#define mcfintc_h
14/****************************************************************************/
15
16/*
17 * Most of the older ColdFire parts use the same simple interrupt
18 * controller. This is currently used on the 5206, 5206e, 5249, 5307
19 * and 5407 parts.
20 *
21 * The builtin peripherals are masked through dedicated bits in the
22 * Interrupt Mask register (IMR) - and this is not indexed (or in any way
23 * related to) the actual interrupt number they use. So knowing the IRQ
24 * number doesn't explicitly map to a certain internal device for
25 * interrupt control purposes.
26 */
27
28/*
29 * Bit definitions for the ICR family of registers.
30 */
31#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */
32#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */
33#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */
34#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */
35#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */
36#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */
37#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */
38#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */
39#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */
40
41#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */
42#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */
43#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */
44#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */
45
46/*
47 * IMR bit position definitions. Not all ColdFire parts with this interrupt
48 * controller actually support all of these interrupt sources. But the bit
49 * numbers are the same in all cores.
50 */
51#define MCFINTC_EINT1 1 /* External int #1 */
52#define MCFINTC_EINT2 2 /* External int #2 */
53#define MCFINTC_EINT3 3 /* External int #3 */
54#define MCFINTC_EINT4 4 /* External int #4 */
55#define MCFINTC_EINT5 5 /* External int #5 */
56#define MCFINTC_EINT6 6 /* External int #6 */
57#define MCFINTC_EINT7 7 /* External int #7 */
58#define MCFINTC_SWT 8 /* Software Watchdog */
59#define MCFINTC_TIMER1 9
60#define MCFINTC_TIMER2 10
61#define MCFINTC_I2C 11 /* I2C / MBUS */
62#define MCFINTC_UART0 12
63#define MCFINTC_UART1 13
64#define MCFINTC_DMA0 14
65#define MCFINTC_DMA1 15
66#define MCFINTC_DMA2 16
67#define MCFINTC_DMA3 17
68#define MCFINTC_QSPI 18
69
70#ifndef __ASSEMBLER__
71
72/*
73 * There is no one-is-one correspondance between the interrupt number (irq)
74 * and the bit fields on the mask register. So we create a per-cpu type
75 * mapping of irq to mask bit. The CPU platform code needs to register
76 * its supported irq's at init time, using this function.
77 */
78extern unsigned char mcf_irq2imr[];
79static inline void mcf_mapirq2imr(int irq, int imr)
80{
81 mcf_irq2imr[irq] = imr;
82}
83
84void mcf_autovector(int irq);
85void mcf_setimr(int index);
86void mcf_clrimr(int index);
87#endif
88
89/****************************************************************************/
90#endif /* mcfintc_h */
1/* SPDX-License-Identifier: GPL-2.0 */
2/****************************************************************************/
3
4/*
5 * mcfintc.h -- support definitions for the simple ColdFire
6 * Interrupt Controller
7 *
8 * (C) Copyright 2009, Greg Ungerer <gerg@uclinux.org>
9 */
10
11/****************************************************************************/
12#ifndef mcfintc_h
13#define mcfintc_h
14/****************************************************************************/
15
16/*
17 * Most of the older ColdFire parts use the same simple interrupt
18 * controller. This is currently used on the 5206, 5206e, 5249, 5307
19 * and 5407 parts.
20 *
21 * The builtin peripherals are masked through dedicated bits in the
22 * Interrupt Mask register (IMR) - and this is not indexed (or in any way
23 * related to) the actual interrupt number they use. So knowing the IRQ
24 * number doesn't explicitly map to a certain internal device for
25 * interrupt control purposes.
26 */
27
28/*
29 * Bit definitions for the ICR family of registers.
30 */
31#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */
32#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */
33#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */
34#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */
35#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */
36#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */
37#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */
38#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */
39#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */
40
41#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */
42#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */
43#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */
44#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */
45
46/*
47 * IMR bit position definitions. Not all ColdFire parts with this interrupt
48 * controller actually support all of these interrupt sources. But the bit
49 * numbers are the same in all cores.
50 */
51#define MCFINTC_EINT1 1 /* External int #1 */
52#define MCFINTC_EINT2 2 /* External int #2 */
53#define MCFINTC_EINT3 3 /* External int #3 */
54#define MCFINTC_EINT4 4 /* External int #4 */
55#define MCFINTC_EINT5 5 /* External int #5 */
56#define MCFINTC_EINT6 6 /* External int #6 */
57#define MCFINTC_EINT7 7 /* External int #7 */
58#define MCFINTC_SWT 8 /* Software Watchdog */
59#define MCFINTC_TIMER1 9
60#define MCFINTC_TIMER2 10
61#define MCFINTC_I2C 11 /* I2C / MBUS */
62#define MCFINTC_UART0 12
63#define MCFINTC_UART1 13
64#define MCFINTC_DMA0 14
65#define MCFINTC_DMA1 15
66#define MCFINTC_DMA2 16
67#define MCFINTC_DMA3 17
68#define MCFINTC_QSPI 18
69
70#ifndef __ASSEMBLER__
71
72/*
73 * There is no one-is-one correspondance between the interrupt number (irq)
74 * and the bit fields on the mask register. So we create a per-cpu type
75 * mapping of irq to mask bit. The CPU platform code needs to register
76 * its supported irq's at init time, using this function.
77 */
78extern unsigned char mcf_irq2imr[];
79static inline void mcf_mapirq2imr(int irq, int imr)
80{
81 mcf_irq2imr[irq] = imr;
82}
83
84void mcf_autovector(int irq);
85void mcf_setimr(int index);
86void mcf_clrimr(int index);
87#endif
88
89/****************************************************************************/
90#endif /* mcfintc_h */