Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * TI/National Semiconductor LP3943 MFD Core Driver
4 *
5 * Copyright 2013 Texas Instruments
6 *
7 * Author: Milo Kim <milo.kim@ti.com>
8 *
9 * Driver structure:
10 * LP3943 is an integrated device capable of driving 16 output channels.
11 * It can be used for a GPIO expander and PWM generators.
12 *
13 * LED control General usage for a device
14 * ___________ ____________________________
15 *
16 * LP3943 MFD ---- GPIO expander leds-gpio eg) HW enable pin
17 * |
18 * --- PWM generator leds-pwm eg) PWM input
19 *
20 * Internal two PWM channels are used for LED dimming effect.
21 * And each output pin can be used as a GPIO as well.
22 * The LED functionality can work with GPIOs or PWMs.
23 * LEDs can be controlled with legacy leds-gpio(static brightness) or
24 * leds-pwm drivers(dynamic brightness control).
25 * Alternatively, it can be used for generic GPIO and PWM controller.
26 * For example, a GPIO is HW enable pin of a device.
27 * A PWM is input pin of a backlight device.
28 */
29
30#include <linux/err.h>
31#include <linux/gpio.h>
32#include <linux/i2c.h>
33#include <linux/mfd/core.h>
34#include <linux/mfd/lp3943.h>
35#include <linux/module.h>
36#include <linux/of.h>
37#include <linux/slab.h>
38
39#define LP3943_MAX_REGISTERS 0x09
40
41/* Register configuration for pin MUX */
42static const struct lp3943_reg_cfg lp3943_mux_cfg[] = {
43 /* address, mask, shift */
44 { LP3943_REG_MUX0, 0x03, 0 },
45 { LP3943_REG_MUX0, 0x0C, 2 },
46 { LP3943_REG_MUX0, 0x30, 4 },
47 { LP3943_REG_MUX0, 0xC0, 6 },
48 { LP3943_REG_MUX1, 0x03, 0 },
49 { LP3943_REG_MUX1, 0x0C, 2 },
50 { LP3943_REG_MUX1, 0x30, 4 },
51 { LP3943_REG_MUX1, 0xC0, 6 },
52 { LP3943_REG_MUX2, 0x03, 0 },
53 { LP3943_REG_MUX2, 0x0C, 2 },
54 { LP3943_REG_MUX2, 0x30, 4 },
55 { LP3943_REG_MUX2, 0xC0, 6 },
56 { LP3943_REG_MUX3, 0x03, 0 },
57 { LP3943_REG_MUX3, 0x0C, 2 },
58 { LP3943_REG_MUX3, 0x30, 4 },
59 { LP3943_REG_MUX3, 0xC0, 6 },
60};
61
62static const struct mfd_cell lp3943_devs[] = {
63 {
64 .name = "lp3943-pwm",
65 .of_compatible = "ti,lp3943-pwm",
66 },
67 {
68 .name = "lp3943-gpio",
69 .of_compatible = "ti,lp3943-gpio",
70 },
71};
72
73int lp3943_read_byte(struct lp3943 *lp3943, u8 reg, u8 *read)
74{
75 int ret;
76 unsigned int val;
77
78 ret = regmap_read(lp3943->regmap, reg, &val);
79 if (ret < 0)
80 return ret;
81
82 *read = (u8)val;
83 return 0;
84}
85EXPORT_SYMBOL_GPL(lp3943_read_byte);
86
87int lp3943_write_byte(struct lp3943 *lp3943, u8 reg, u8 data)
88{
89 return regmap_write(lp3943->regmap, reg, data);
90}
91EXPORT_SYMBOL_GPL(lp3943_write_byte);
92
93int lp3943_update_bits(struct lp3943 *lp3943, u8 reg, u8 mask, u8 data)
94{
95 return regmap_update_bits(lp3943->regmap, reg, mask, data);
96}
97EXPORT_SYMBOL_GPL(lp3943_update_bits);
98
99static const struct regmap_config lp3943_regmap_config = {
100 .reg_bits = 8,
101 .val_bits = 8,
102 .max_register = LP3943_MAX_REGISTERS,
103};
104
105static int lp3943_probe(struct i2c_client *cl, const struct i2c_device_id *id)
106{
107 struct lp3943 *lp3943;
108 struct device *dev = &cl->dev;
109
110 lp3943 = devm_kzalloc(dev, sizeof(*lp3943), GFP_KERNEL);
111 if (!lp3943)
112 return -ENOMEM;
113
114 lp3943->regmap = devm_regmap_init_i2c(cl, &lp3943_regmap_config);
115 if (IS_ERR(lp3943->regmap))
116 return PTR_ERR(lp3943->regmap);
117
118 lp3943->pdata = dev_get_platdata(dev);
119 lp3943->dev = dev;
120 lp3943->mux_cfg = lp3943_mux_cfg;
121 i2c_set_clientdata(cl, lp3943);
122
123 return devm_mfd_add_devices(dev, -1, lp3943_devs,
124 ARRAY_SIZE(lp3943_devs),
125 NULL, 0, NULL);
126}
127
128static const struct i2c_device_id lp3943_ids[] = {
129 { "lp3943", 0 },
130 { }
131};
132MODULE_DEVICE_TABLE(i2c, lp3943_ids);
133
134#ifdef CONFIG_OF
135static const struct of_device_id lp3943_of_match[] = {
136 { .compatible = "ti,lp3943", },
137 { }
138};
139MODULE_DEVICE_TABLE(of, lp3943_of_match);
140#endif
141
142static struct i2c_driver lp3943_driver = {
143 .probe = lp3943_probe,
144 .driver = {
145 .name = "lp3943",
146 .of_match_table = of_match_ptr(lp3943_of_match),
147 },
148 .id_table = lp3943_ids,
149};
150
151module_i2c_driver(lp3943_driver);
152
153MODULE_DESCRIPTION("LP3943 MFD Core Driver");
154MODULE_AUTHOR("Milo Kim");
155MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * TI/National Semiconductor LP3943 MFD Core Driver
4 *
5 * Copyright 2013 Texas Instruments
6 *
7 * Author: Milo Kim <milo.kim@ti.com>
8 *
9 * Driver structure:
10 * LP3943 is an integrated device capable of driving 16 output channels.
11 * It can be used for a GPIO expander and PWM generators.
12 *
13 * LED control General usage for a device
14 * ___________ ____________________________
15 *
16 * LP3943 MFD ---- GPIO expander leds-gpio eg) HW enable pin
17 * |
18 * --- PWM generator leds-pwm eg) PWM input
19 *
20 * Internal two PWM channels are used for LED dimming effect.
21 * And each output pin can be used as a GPIO as well.
22 * The LED functionality can work with GPIOs or PWMs.
23 * LEDs can be controlled with legacy leds-gpio(static brightness) or
24 * leds-pwm drivers(dynamic brightness control).
25 * Alternatively, it can be used for generic GPIO and PWM controller.
26 * For example, a GPIO is HW enable pin of a device.
27 * A PWM is input pin of a backlight device.
28 */
29
30#include <linux/err.h>
31#include <linux/gpio.h>
32#include <linux/i2c.h>
33#include <linux/mfd/core.h>
34#include <linux/mfd/lp3943.h>
35#include <linux/module.h>
36#include <linux/of.h>
37#include <linux/slab.h>
38
39#define LP3943_MAX_REGISTERS 0x09
40
41/* Register configuration for pin MUX */
42static const struct lp3943_reg_cfg lp3943_mux_cfg[] = {
43 /* address, mask, shift */
44 { LP3943_REG_MUX0, 0x03, 0 },
45 { LP3943_REG_MUX0, 0x0C, 2 },
46 { LP3943_REG_MUX0, 0x30, 4 },
47 { LP3943_REG_MUX0, 0xC0, 6 },
48 { LP3943_REG_MUX1, 0x03, 0 },
49 { LP3943_REG_MUX1, 0x0C, 2 },
50 { LP3943_REG_MUX1, 0x30, 4 },
51 { LP3943_REG_MUX1, 0xC0, 6 },
52 { LP3943_REG_MUX2, 0x03, 0 },
53 { LP3943_REG_MUX2, 0x0C, 2 },
54 { LP3943_REG_MUX2, 0x30, 4 },
55 { LP3943_REG_MUX2, 0xC0, 6 },
56 { LP3943_REG_MUX3, 0x03, 0 },
57 { LP3943_REG_MUX3, 0x0C, 2 },
58 { LP3943_REG_MUX3, 0x30, 4 },
59 { LP3943_REG_MUX3, 0xC0, 6 },
60};
61
62static const struct mfd_cell lp3943_devs[] = {
63 {
64 .name = "lp3943-pwm",
65 .of_compatible = "ti,lp3943-pwm",
66 },
67 {
68 .name = "lp3943-gpio",
69 .of_compatible = "ti,lp3943-gpio",
70 },
71};
72
73int lp3943_read_byte(struct lp3943 *lp3943, u8 reg, u8 *read)
74{
75 int ret;
76 unsigned int val;
77
78 ret = regmap_read(lp3943->regmap, reg, &val);
79 if (ret < 0)
80 return ret;
81
82 *read = (u8)val;
83 return 0;
84}
85EXPORT_SYMBOL_GPL(lp3943_read_byte);
86
87int lp3943_write_byte(struct lp3943 *lp3943, u8 reg, u8 data)
88{
89 return regmap_write(lp3943->regmap, reg, data);
90}
91EXPORT_SYMBOL_GPL(lp3943_write_byte);
92
93int lp3943_update_bits(struct lp3943 *lp3943, u8 reg, u8 mask, u8 data)
94{
95 return regmap_update_bits(lp3943->regmap, reg, mask, data);
96}
97EXPORT_SYMBOL_GPL(lp3943_update_bits);
98
99static const struct regmap_config lp3943_regmap_config = {
100 .reg_bits = 8,
101 .val_bits = 8,
102 .max_register = LP3943_MAX_REGISTERS,
103};
104
105static int lp3943_probe(struct i2c_client *cl)
106{
107 struct lp3943 *lp3943;
108 struct device *dev = &cl->dev;
109
110 lp3943 = devm_kzalloc(dev, sizeof(*lp3943), GFP_KERNEL);
111 if (!lp3943)
112 return -ENOMEM;
113
114 lp3943->regmap = devm_regmap_init_i2c(cl, &lp3943_regmap_config);
115 if (IS_ERR(lp3943->regmap))
116 return PTR_ERR(lp3943->regmap);
117
118 lp3943->pdata = dev_get_platdata(dev);
119 lp3943->dev = dev;
120 lp3943->mux_cfg = lp3943_mux_cfg;
121 i2c_set_clientdata(cl, lp3943);
122
123 return devm_mfd_add_devices(dev, -1, lp3943_devs,
124 ARRAY_SIZE(lp3943_devs),
125 NULL, 0, NULL);
126}
127
128static const struct i2c_device_id lp3943_ids[] = {
129 { "lp3943", 0 },
130 { }
131};
132MODULE_DEVICE_TABLE(i2c, lp3943_ids);
133
134#ifdef CONFIG_OF
135static const struct of_device_id lp3943_of_match[] = {
136 { .compatible = "ti,lp3943", },
137 { }
138};
139MODULE_DEVICE_TABLE(of, lp3943_of_match);
140#endif
141
142static struct i2c_driver lp3943_driver = {
143 .probe_new = lp3943_probe,
144 .driver = {
145 .name = "lp3943",
146 .of_match_table = of_match_ptr(lp3943_of_match),
147 },
148 .id_table = lp3943_ids,
149};
150
151module_i2c_driver(lp3943_driver);
152
153MODULE_DESCRIPTION("LP3943 MFD Core Driver");
154MODULE_AUTHOR("Milo Kim");
155MODULE_LICENSE("GPL");