Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2002 ARM Limited, All Rights Reserved.
4 */
5
6#include <linux/interrupt.h>
7#include <linux/io.h>
8#include <linux/irq.h>
9#include <linux/irqchip/arm-gic.h>
10
11#include "irq-gic-common.h"
12
13static DEFINE_RAW_SPINLOCK(irq_controller_lock);
14
15static const struct gic_kvm_info *gic_kvm_info;
16
17const struct gic_kvm_info *gic_get_kvm_info(void)
18{
19 return gic_kvm_info;
20}
21
22void gic_set_kvm_info(const struct gic_kvm_info *info)
23{
24 BUG_ON(gic_kvm_info != NULL);
25 gic_kvm_info = info;
26}
27
28void gic_enable_of_quirks(const struct device_node *np,
29 const struct gic_quirk *quirks, void *data)
30{
31 for (; quirks->desc; quirks++) {
32 if (!of_device_is_compatible(np, quirks->compatible))
33 continue;
34 if (quirks->init(data))
35 pr_info("GIC: enabling workaround for %s\n",
36 quirks->desc);
37 }
38}
39
40void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
41 void *data)
42{
43 for (; quirks->desc; quirks++) {
44 if (quirks->compatible)
45 continue;
46 if (quirks->iidr != (quirks->mask & iidr))
47 continue;
48 if (quirks->init(data))
49 pr_info("GIC: enabling workaround for %s\n",
50 quirks->desc);
51 }
52}
53
54int gic_configure_irq(unsigned int irq, unsigned int type,
55 void __iomem *base, void (*sync_access)(void))
56{
57 u32 confmask = 0x2 << ((irq % 16) * 2);
58 u32 confoff = (irq / 16) * 4;
59 u32 val, oldval;
60 int ret = 0;
61 unsigned long flags;
62
63 /*
64 * Read current configuration register, and insert the config
65 * for "irq", depending on "type".
66 */
67 raw_spin_lock_irqsave(&irq_controller_lock, flags);
68 val = oldval = readl_relaxed(base + confoff);
69 if (type & IRQ_TYPE_LEVEL_MASK)
70 val &= ~confmask;
71 else if (type & IRQ_TYPE_EDGE_BOTH)
72 val |= confmask;
73
74 /* If the current configuration is the same, then we are done */
75 if (val == oldval) {
76 raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
77 return 0;
78 }
79
80 /*
81 * Write back the new configuration, and possibly re-enable
82 * the interrupt. If we fail to write a new configuration for
83 * an SPI then WARN and return an error. If we fail to write the
84 * configuration for a PPI this is most likely because the GIC
85 * does not allow us to set the configuration or we are in a
86 * non-secure mode, and hence it may not be catastrophic.
87 */
88 writel_relaxed(val, base + confoff);
89 if (readl_relaxed(base + confoff) != val)
90 ret = -EINVAL;
91
92 raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
93
94 if (sync_access)
95 sync_access();
96
97 return ret;
98}
99
100void gic_dist_config(void __iomem *base, int gic_irqs,
101 void (*sync_access)(void))
102{
103 unsigned int i;
104
105 /*
106 * Set all global interrupts to be level triggered, active low.
107 */
108 for (i = 32; i < gic_irqs; i += 16)
109 writel_relaxed(GICD_INT_ACTLOW_LVLTRIG,
110 base + GIC_DIST_CONFIG + i / 4);
111
112 /*
113 * Set priority on all global interrupts.
114 */
115 for (i = 32; i < gic_irqs; i += 4)
116 writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i);
117
118 /*
119 * Deactivate and disable all SPIs. Leave the PPI and SGIs
120 * alone as they are in the redistributor registers on GICv3.
121 */
122 for (i = 32; i < gic_irqs; i += 32) {
123 writel_relaxed(GICD_INT_EN_CLR_X32,
124 base + GIC_DIST_ACTIVE_CLEAR + i / 8);
125 writel_relaxed(GICD_INT_EN_CLR_X32,
126 base + GIC_DIST_ENABLE_CLEAR + i / 8);
127 }
128
129 if (sync_access)
130 sync_access();
131}
132
133void gic_cpu_config(void __iomem *base, int nr, void (*sync_access)(void))
134{
135 int i;
136
137 /*
138 * Deal with the banked PPI and SGI interrupts - disable all
139 * private interrupts. Make sure everything is deactivated.
140 */
141 for (i = 0; i < nr; i += 32) {
142 writel_relaxed(GICD_INT_EN_CLR_X32,
143 base + GIC_DIST_ACTIVE_CLEAR + i / 8);
144 writel_relaxed(GICD_INT_EN_CLR_X32,
145 base + GIC_DIST_ENABLE_CLEAR + i / 8);
146 }
147
148 /*
149 * Set priority on PPI and SGI interrupts
150 */
151 for (i = 0; i < nr; i += 4)
152 writel_relaxed(GICD_INT_DEF_PRI_X4,
153 base + GIC_DIST_PRI + i * 4 / 4);
154
155 /* Ensure all SGI interrupts are now enabled */
156 writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET);
157
158 if (sync_access)
159 sync_access();
160}
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2002 ARM Limited, All Rights Reserved.
4 */
5
6#include <linux/interrupt.h>
7#include <linux/io.h>
8#include <linux/irq.h>
9#include <linux/irqchip/arm-gic.h>
10
11#include "irq-gic-common.h"
12
13static DEFINE_RAW_SPINLOCK(irq_controller_lock);
14
15void gic_enable_of_quirks(const struct device_node *np,
16 const struct gic_quirk *quirks, void *data)
17{
18 for (; quirks->desc; quirks++) {
19 if (!of_device_is_compatible(np, quirks->compatible))
20 continue;
21 if (quirks->init(data))
22 pr_info("GIC: enabling workaround for %s\n",
23 quirks->desc);
24 }
25}
26
27void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
28 void *data)
29{
30 for (; quirks->desc; quirks++) {
31 if (quirks->compatible)
32 continue;
33 if (quirks->iidr != (quirks->mask & iidr))
34 continue;
35 if (quirks->init(data))
36 pr_info("GIC: enabling workaround for %s\n",
37 quirks->desc);
38 }
39}
40
41int gic_configure_irq(unsigned int irq, unsigned int type,
42 void __iomem *base, void (*sync_access)(void))
43{
44 u32 confmask = 0x2 << ((irq % 16) * 2);
45 u32 confoff = (irq / 16) * 4;
46 u32 val, oldval;
47 int ret = 0;
48 unsigned long flags;
49
50 /*
51 * Read current configuration register, and insert the config
52 * for "irq", depending on "type".
53 */
54 raw_spin_lock_irqsave(&irq_controller_lock, flags);
55 val = oldval = readl_relaxed(base + confoff);
56 if (type & IRQ_TYPE_LEVEL_MASK)
57 val &= ~confmask;
58 else if (type & IRQ_TYPE_EDGE_BOTH)
59 val |= confmask;
60
61 /* If the current configuration is the same, then we are done */
62 if (val == oldval) {
63 raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
64 return 0;
65 }
66
67 /*
68 * Write back the new configuration, and possibly re-enable
69 * the interrupt. If we fail to write a new configuration for
70 * an SPI then WARN and return an error. If we fail to write the
71 * configuration for a PPI this is most likely because the GIC
72 * does not allow us to set the configuration or we are in a
73 * non-secure mode, and hence it may not be catastrophic.
74 */
75 writel_relaxed(val, base + confoff);
76 if (readl_relaxed(base + confoff) != val)
77 ret = -EINVAL;
78
79 raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
80
81 if (sync_access)
82 sync_access();
83
84 return ret;
85}
86
87void gic_dist_config(void __iomem *base, int gic_irqs,
88 void (*sync_access)(void))
89{
90 unsigned int i;
91
92 /*
93 * Set all global interrupts to be level triggered, active low.
94 */
95 for (i = 32; i < gic_irqs; i += 16)
96 writel_relaxed(GICD_INT_ACTLOW_LVLTRIG,
97 base + GIC_DIST_CONFIG + i / 4);
98
99 /*
100 * Set priority on all global interrupts.
101 */
102 for (i = 32; i < gic_irqs; i += 4)
103 writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i);
104
105 /*
106 * Deactivate and disable all SPIs. Leave the PPI and SGIs
107 * alone as they are in the redistributor registers on GICv3.
108 */
109 for (i = 32; i < gic_irqs; i += 32) {
110 writel_relaxed(GICD_INT_EN_CLR_X32,
111 base + GIC_DIST_ACTIVE_CLEAR + i / 8);
112 writel_relaxed(GICD_INT_EN_CLR_X32,
113 base + GIC_DIST_ENABLE_CLEAR + i / 8);
114 }
115
116 if (sync_access)
117 sync_access();
118}
119
120void gic_cpu_config(void __iomem *base, int nr, void (*sync_access)(void))
121{
122 int i;
123
124 /*
125 * Deal with the banked PPI and SGI interrupts - disable all
126 * private interrupts. Make sure everything is deactivated.
127 */
128 for (i = 0; i < nr; i += 32) {
129 writel_relaxed(GICD_INT_EN_CLR_X32,
130 base + GIC_DIST_ACTIVE_CLEAR + i / 8);
131 writel_relaxed(GICD_INT_EN_CLR_X32,
132 base + GIC_DIST_ENABLE_CLEAR + i / 8);
133 }
134
135 /*
136 * Set priority on PPI and SGI interrupts
137 */
138 for (i = 0; i < nr; i += 4)
139 writel_relaxed(GICD_INT_DEF_PRI_X4,
140 base + GIC_DIST_PRI + i * 4 / 4);
141
142 if (sync_access)
143 sync_access();
144}