Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Low-level ALSA driver for the ENSONIQ SoundScape
4 * Copyright (c) by Chris Rankin
5 *
6 * This driver was written in part using information obtained from
7 * the OSS/Free SoundScape driver, written by Hannu Savolainen.
8 */
9
10#include <linux/init.h>
11#include <linux/err.h>
12#include <linux/io.h>
13#include <linux/isa.h>
14#include <linux/delay.h>
15#include <linux/firmware.h>
16#include <linux/pnp.h>
17#include <linux/spinlock.h>
18#include <linux/module.h>
19#include <asm/dma.h>
20#include <sound/core.h>
21#include <sound/wss.h>
22#include <sound/mpu401.h>
23#include <sound/initval.h>
24
25
26MODULE_AUTHOR("Chris Rankin");
27MODULE_DESCRIPTION("ENSONIQ SoundScape driver");
28MODULE_LICENSE("GPL");
29MODULE_FIRMWARE("sndscape.co0");
30MODULE_FIRMWARE("sndscape.co1");
31MODULE_FIRMWARE("sndscape.co2");
32MODULE_FIRMWARE("sndscape.co3");
33MODULE_FIRMWARE("sndscape.co4");
34MODULE_FIRMWARE("scope.cod");
35
36static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
37static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
38static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
39static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
40static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
41static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
42static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
43static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
44static bool joystick[SNDRV_CARDS];
45
46module_param_array(index, int, NULL, 0444);
47MODULE_PARM_DESC(index, "Index number for SoundScape soundcard");
48
49module_param_array(id, charp, NULL, 0444);
50MODULE_PARM_DESC(id, "Description for SoundScape card");
51
52module_param_hw_array(port, long, ioport, NULL, 0444);
53MODULE_PARM_DESC(port, "Port # for SoundScape driver.");
54
55module_param_hw_array(wss_port, long, ioport, NULL, 0444);
56MODULE_PARM_DESC(wss_port, "WSS Port # for SoundScape driver.");
57
58module_param_hw_array(irq, int, irq, NULL, 0444);
59MODULE_PARM_DESC(irq, "IRQ # for SoundScape driver.");
60
61module_param_hw_array(mpu_irq, int, irq, NULL, 0444);
62MODULE_PARM_DESC(mpu_irq, "MPU401 IRQ # for SoundScape driver.");
63
64module_param_hw_array(dma, int, dma, NULL, 0444);
65MODULE_PARM_DESC(dma, "DMA # for SoundScape driver.");
66
67module_param_hw_array(dma2, int, dma, NULL, 0444);
68MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver.");
69
70module_param_array(joystick, bool, NULL, 0444);
71MODULE_PARM_DESC(joystick, "Enable gameport.");
72
73#ifdef CONFIG_PNP
74static int isa_registered;
75static int pnp_registered;
76
77static const struct pnp_card_device_id sscape_pnpids[] = {
78 { .id = "ENS3081", .devs = { { "ENS0000" } } }, /* Soundscape PnP */
79 { .id = "ENS4081", .devs = { { "ENS1011" } } }, /* VIVO90 */
80 { .id = "" } /* end */
81};
82
83MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids);
84#endif
85
86
87#define HOST_CTRL_IO(i) ((i) + 2)
88#define HOST_DATA_IO(i) ((i) + 3)
89#define ODIE_ADDR_IO(i) ((i) + 4)
90#define ODIE_DATA_IO(i) ((i) + 5)
91#define CODEC_IO(i) ((i) + 8)
92
93#define IC_ODIE 1
94#define IC_OPUS 2
95
96#define RX_READY 0x01
97#define TX_READY 0x02
98
99#define CMD_ACK 0x80
100#define CMD_SET_MIDI_VOL 0x84
101#define CMD_GET_MIDI_VOL 0x85
102#define CMD_XXX_MIDI_VOL 0x86
103#define CMD_SET_EXTMIDI 0x8a
104#define CMD_GET_EXTMIDI 0x8b
105#define CMD_SET_MT32 0x8c
106#define CMD_GET_MT32 0x8d
107
108enum GA_REG {
109 GA_INTSTAT_REG = 0,
110 GA_INTENA_REG,
111 GA_DMAA_REG,
112 GA_DMAB_REG,
113 GA_INTCFG_REG,
114 GA_DMACFG_REG,
115 GA_CDCFG_REG,
116 GA_SMCFGA_REG,
117 GA_SMCFGB_REG,
118 GA_HMCTL_REG
119};
120
121#define DMA_8BIT 0x80
122
123
124enum card_type {
125 MEDIA_FX, /* Sequoia S-1000 */
126 SSCAPE, /* Sequoia S-2000 */
127 SSCAPE_PNP,
128 SSCAPE_VIVO,
129};
130
131struct soundscape {
132 spinlock_t lock;
133 unsigned io_base;
134 int ic_type;
135 enum card_type type;
136 struct resource *io_res;
137 struct resource *wss_res;
138 struct snd_wss *chip;
139
140 unsigned char midi_vol;
141};
142
143#define INVALID_IRQ ((unsigned)-1)
144
145
146static inline struct soundscape *get_card_soundscape(struct snd_card *c)
147{
148 return (struct soundscape *) (c->private_data);
149}
150
151/*
152 * Allocates some kernel memory that we can use for DMA.
153 * I think this means that the memory has to map to
154 * contiguous pages of physical memory.
155 */
156static struct snd_dma_buffer *get_dmabuf(struct soundscape *s,
157 struct snd_dma_buffer *buf,
158 unsigned long size)
159{
160 if (buf) {
161 if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV,
162 s->chip->card->dev,
163 size, buf) < 0) {
164 snd_printk(KERN_ERR "sscape: Failed to allocate "
165 "%lu bytes for DMA\n",
166 size);
167 return NULL;
168 }
169 }
170
171 return buf;
172}
173
174/*
175 * Release the DMA-able kernel memory ...
176 */
177static void free_dmabuf(struct snd_dma_buffer *buf)
178{
179 if (buf && buf->area)
180 snd_dma_free_pages(buf);
181}
182
183/*
184 * This function writes to the SoundScape's control registers,
185 * but doesn't do any locking. It's up to the caller to do that.
186 * This is why this function is "unsafe" ...
187 */
188static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg,
189 unsigned char val)
190{
191 outb(reg, ODIE_ADDR_IO(io_base));
192 outb(val, ODIE_DATA_IO(io_base));
193}
194
195/*
196 * Write to the SoundScape's control registers, and do the
197 * necessary locking ...
198 */
199static void sscape_write(struct soundscape *s, enum GA_REG reg,
200 unsigned char val)
201{
202 unsigned long flags;
203
204 spin_lock_irqsave(&s->lock, flags);
205 sscape_write_unsafe(s->io_base, reg, val);
206 spin_unlock_irqrestore(&s->lock, flags);
207}
208
209/*
210 * Read from the SoundScape's control registers, but leave any
211 * locking to the caller. This is why the function is "unsafe" ...
212 */
213static inline unsigned char sscape_read_unsafe(unsigned io_base,
214 enum GA_REG reg)
215{
216 outb(reg, ODIE_ADDR_IO(io_base));
217 return inb(ODIE_DATA_IO(io_base));
218}
219
220/*
221 * Puts the SoundScape into "host" mode, as compared to "MIDI" mode
222 */
223static inline void set_host_mode_unsafe(unsigned io_base)
224{
225 outb(0x0, HOST_CTRL_IO(io_base));
226}
227
228/*
229 * Puts the SoundScape into "MIDI" mode, as compared to "host" mode
230 */
231static inline void set_midi_mode_unsafe(unsigned io_base)
232{
233 outb(0x3, HOST_CTRL_IO(io_base));
234}
235
236/*
237 * Read the SoundScape's host-mode control register, but leave
238 * any locking issues to the caller ...
239 */
240static inline int host_read_unsafe(unsigned io_base)
241{
242 int data = -1;
243 if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0)
244 data = inb(HOST_DATA_IO(io_base));
245
246 return data;
247}
248
249/*
250 * Read the SoundScape's host-mode control register, performing
251 * a limited amount of busy-waiting if the register isn't ready.
252 * Also leaves all locking-issues to the caller ...
253 */
254static int host_read_ctrl_unsafe(unsigned io_base, unsigned timeout)
255{
256 int data;
257
258 while (((data = host_read_unsafe(io_base)) < 0) && (timeout != 0)) {
259 udelay(100);
260 --timeout;
261 } /* while */
262
263 return data;
264}
265
266/*
267 * Write to the SoundScape's host-mode control registers, but
268 * leave any locking issues to the caller ...
269 */
270static inline int host_write_unsafe(unsigned io_base, unsigned char data)
271{
272 if ((inb(HOST_CTRL_IO(io_base)) & TX_READY) != 0) {
273 outb(data, HOST_DATA_IO(io_base));
274 return 1;
275 }
276
277 return 0;
278}
279
280/*
281 * Write to the SoundScape's host-mode control registers, performing
282 * a limited amount of busy-waiting if the register isn't ready.
283 * Also leaves all locking-issues to the caller ...
284 */
285static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data,
286 unsigned timeout)
287{
288 int err;
289
290 while (!(err = host_write_unsafe(io_base, data)) && (timeout != 0)) {
291 udelay(100);
292 --timeout;
293 } /* while */
294
295 return err;
296}
297
298
299/*
300 * Check that the MIDI subsystem is operational. If it isn't,
301 * then we will hang the computer if we try to use it ...
302 *
303 * NOTE: This check is based upon observation, not documentation.
304 */
305static inline int verify_mpu401(const struct snd_mpu401 *mpu)
306{
307 return ((inb(MPU401C(mpu)) & 0xc0) == 0x80);
308}
309
310/*
311 * This is apparently the standard way to initialise an MPU-401
312 */
313static inline void initialise_mpu401(const struct snd_mpu401 *mpu)
314{
315 outb(0, MPU401D(mpu));
316}
317
318/*
319 * Tell the SoundScape to activate the AD1845 chip (I think).
320 * The AD1845 detection fails if we *don't* do this, so I
321 * think that this is a good idea ...
322 */
323static void activate_ad1845_unsafe(unsigned io_base)
324{
325 unsigned char val = sscape_read_unsafe(io_base, GA_HMCTL_REG);
326 sscape_write_unsafe(io_base, GA_HMCTL_REG, (val & 0xcf) | 0x10);
327 sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80);
328}
329
330/*
331 * Do the necessary ALSA-level cleanup to deallocate our driver ...
332 */
333static void soundscape_free(struct snd_card *c)
334{
335 struct soundscape *sscape = get_card_soundscape(c);
336 release_and_free_resource(sscape->io_res);
337 release_and_free_resource(sscape->wss_res);
338 free_dma(sscape->chip->dma1);
339}
340
341/*
342 * Tell the SoundScape to begin a DMA transfer using the given channel.
343 * All locking issues are left to the caller.
344 */
345static void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg)
346{
347 sscape_write_unsafe(io_base, reg,
348 sscape_read_unsafe(io_base, reg) | 0x01);
349 sscape_write_unsafe(io_base, reg,
350 sscape_read_unsafe(io_base, reg) & 0xfe);
351}
352
353/*
354 * Wait for a DMA transfer to complete. This is a "limited busy-wait",
355 * and all locking issues are left to the caller.
356 */
357static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg,
358 unsigned timeout)
359{
360 while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) {
361 udelay(100);
362 --timeout;
363 } /* while */
364
365 return sscape_read_unsafe(io_base, reg) & 0x01;
366}
367
368/*
369 * Wait for the On-Board Processor to return its start-up
370 * acknowledgement sequence. This wait is too long for
371 * us to perform "busy-waiting", and so we must sleep.
372 * This in turn means that we must not be holding any
373 * spinlocks when we call this function.
374 */
375static int obp_startup_ack(struct soundscape *s, unsigned timeout)
376{
377 unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
378
379 do {
380 unsigned long flags;
381 int x;
382
383 spin_lock_irqsave(&s->lock, flags);
384 x = host_read_unsafe(s->io_base);
385 spin_unlock_irqrestore(&s->lock, flags);
386 if (x == 0xfe || x == 0xff)
387 return 1;
388
389 msleep(10);
390 } while (time_before(jiffies, end_time));
391
392 return 0;
393}
394
395/*
396 * Wait for the host to return its start-up acknowledgement
397 * sequence. This wait is too long for us to perform
398 * "busy-waiting", and so we must sleep. This in turn means
399 * that we must not be holding any spinlocks when we call
400 * this function.
401 */
402static int host_startup_ack(struct soundscape *s, unsigned timeout)
403{
404 unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
405
406 do {
407 unsigned long flags;
408 int x;
409
410 spin_lock_irqsave(&s->lock, flags);
411 x = host_read_unsafe(s->io_base);
412 spin_unlock_irqrestore(&s->lock, flags);
413 if (x == 0xfe)
414 return 1;
415
416 msleep(10);
417 } while (time_before(jiffies, end_time));
418
419 return 0;
420}
421
422/*
423 * Upload a byte-stream into the SoundScape using DMA channel A.
424 */
425static int upload_dma_data(struct soundscape *s, const unsigned char *data,
426 size_t size)
427{
428 unsigned long flags;
429 struct snd_dma_buffer dma;
430 int ret;
431 unsigned char val;
432
433 if (!get_dmabuf(s, &dma, PAGE_ALIGN(32 * 1024)))
434 return -ENOMEM;
435
436 spin_lock_irqsave(&s->lock, flags);
437
438 /*
439 * Reset the board ...
440 */
441 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
442 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val & 0x3f);
443
444 /*
445 * Enable the DMA channels and configure them ...
446 */
447 val = (s->chip->dma1 << 4) | DMA_8BIT;
448 sscape_write_unsafe(s->io_base, GA_DMAA_REG, val);
449 sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20);
450
451 /*
452 * Take the board out of reset ...
453 */
454 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
455 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x80);
456
457 /*
458 * Upload the firmware to the SoundScape
459 * board through the DMA channel ...
460 */
461 while (size != 0) {
462 unsigned long len;
463
464 len = min(size, dma.bytes);
465 memcpy(dma.area, data, len);
466 data += len;
467 size -= len;
468
469 snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE);
470 sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG);
471 if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) {
472 /*
473 * Don't forget to release this spinlock we're holding
474 */
475 spin_unlock_irqrestore(&s->lock, flags);
476
477 snd_printk(KERN_ERR
478 "sscape: DMA upload has timed out\n");
479 ret = -EAGAIN;
480 goto _release_dma;
481 }
482 } /* while */
483
484 set_host_mode_unsafe(s->io_base);
485 outb(0x0, s->io_base);
486
487 /*
488 * Boot the board ... (I think)
489 */
490 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
491 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x40);
492 spin_unlock_irqrestore(&s->lock, flags);
493
494 /*
495 * If all has gone well, then the board should acknowledge
496 * the new upload and tell us that it has rebooted OK. We
497 * give it 5 seconds (max) ...
498 */
499 ret = 0;
500 if (!obp_startup_ack(s, 5000)) {
501 snd_printk(KERN_ERR "sscape: No response "
502 "from on-board processor after upload\n");
503 ret = -EAGAIN;
504 } else if (!host_startup_ack(s, 5000)) {
505 snd_printk(KERN_ERR
506 "sscape: SoundScape failed to initialise\n");
507 ret = -EAGAIN;
508 }
509
510_release_dma:
511 /*
512 * NOTE!!! We are NOT holding any spinlocks at this point !!!
513 */
514 sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_OPUS ? 0x40 : 0x70));
515 free_dmabuf(&dma);
516
517 return ret;
518}
519
520/*
521 * Upload the bootblock(?) into the SoundScape. The only
522 * purpose of this block of code seems to be to tell
523 * us which version of the microcode we should be using.
524 */
525static int sscape_upload_bootblock(struct snd_card *card)
526{
527 struct soundscape *sscape = get_card_soundscape(card);
528 unsigned long flags;
529 const struct firmware *init_fw = NULL;
530 int data = 0;
531 int ret;
532
533 ret = request_firmware(&init_fw, "scope.cod", card->dev);
534 if (ret < 0) {
535 snd_printk(KERN_ERR "sscape: Error loading scope.cod");
536 return ret;
537 }
538 ret = upload_dma_data(sscape, init_fw->data, init_fw->size);
539
540 release_firmware(init_fw);
541
542 spin_lock_irqsave(&sscape->lock, flags);
543 if (ret == 0)
544 data = host_read_ctrl_unsafe(sscape->io_base, 100);
545
546 if (data & 0x10)
547 sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2f);
548
549 spin_unlock_irqrestore(&sscape->lock, flags);
550
551 data &= 0xf;
552 if (ret == 0 && data > 7) {
553 snd_printk(KERN_ERR
554 "sscape: timeout reading firmware version\n");
555 ret = -EAGAIN;
556 }
557
558 return (ret == 0) ? data : ret;
559}
560
561/*
562 * Upload the microcode into the SoundScape.
563 */
564static int sscape_upload_microcode(struct snd_card *card, int version)
565{
566 struct soundscape *sscape = get_card_soundscape(card);
567 const struct firmware *init_fw = NULL;
568 char name[14];
569 int err;
570
571 snprintf(name, sizeof(name), "sndscape.co%d", version);
572
573 err = request_firmware(&init_fw, name, card->dev);
574 if (err < 0) {
575 snd_printk(KERN_ERR "sscape: Error loading sndscape.co%d",
576 version);
577 return err;
578 }
579 err = upload_dma_data(sscape, init_fw->data, init_fw->size);
580 if (err == 0)
581 snd_printk(KERN_INFO "sscape: MIDI firmware loaded %zu KBs\n",
582 init_fw->size >> 10);
583
584 release_firmware(init_fw);
585
586 return err;
587}
588
589/*
590 * Mixer control for the SoundScape's MIDI device.
591 */
592static int sscape_midi_info(struct snd_kcontrol *ctl,
593 struct snd_ctl_elem_info *uinfo)
594{
595 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
596 uinfo->count = 1;
597 uinfo->value.integer.min = 0;
598 uinfo->value.integer.max = 127;
599 return 0;
600}
601
602static int sscape_midi_get(struct snd_kcontrol *kctl,
603 struct snd_ctl_elem_value *uctl)
604{
605 struct snd_wss *chip = snd_kcontrol_chip(kctl);
606 struct snd_card *card = chip->card;
607 register struct soundscape *s = get_card_soundscape(card);
608 unsigned long flags;
609
610 spin_lock_irqsave(&s->lock, flags);
611 uctl->value.integer.value[0] = s->midi_vol;
612 spin_unlock_irqrestore(&s->lock, flags);
613 return 0;
614}
615
616static int sscape_midi_put(struct snd_kcontrol *kctl,
617 struct snd_ctl_elem_value *uctl)
618{
619 struct snd_wss *chip = snd_kcontrol_chip(kctl);
620 struct snd_card *card = chip->card;
621 struct soundscape *s = get_card_soundscape(card);
622 unsigned long flags;
623 int change;
624 unsigned char new_val;
625
626 spin_lock_irqsave(&s->lock, flags);
627
628 new_val = uctl->value.integer.value[0] & 127;
629 /*
630 * We need to put the board into HOST mode before we
631 * can send any volume-changing HOST commands ...
632 */
633 set_host_mode_unsafe(s->io_base);
634
635 /*
636 * To successfully change the MIDI volume setting, you seem to
637 * have to write a volume command, write the new volume value,
638 * and then perform another volume-related command. Perhaps the
639 * first command is an "open" and the second command is a "close"?
640 */
641 if (s->midi_vol == new_val) {
642 change = 0;
643 goto __skip_change;
644 }
645 change = host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
646 && host_write_ctrl_unsafe(s->io_base, new_val, 100)
647 && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)
648 && host_write_ctrl_unsafe(s->io_base, new_val, 100);
649 s->midi_vol = new_val;
650__skip_change:
651
652 /*
653 * Take the board out of HOST mode and back into MIDI mode ...
654 */
655 set_midi_mode_unsafe(s->io_base);
656
657 spin_unlock_irqrestore(&s->lock, flags);
658 return change;
659}
660
661static const struct snd_kcontrol_new midi_mixer_ctl = {
662 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
663 .name = "MIDI",
664 .info = sscape_midi_info,
665 .get = sscape_midi_get,
666 .put = sscape_midi_put
667};
668
669/*
670 * The SoundScape can use two IRQs from a possible set of four.
671 * These IRQs are encoded as bit patterns so that they can be
672 * written to the control registers.
673 */
674static unsigned get_irq_config(int sscape_type, int irq)
675{
676 static const int valid_irq[] = { 9, 5, 7, 10 };
677 static const int old_irq[] = { 9, 7, 5, 15 };
678 unsigned cfg;
679
680 if (sscape_type == MEDIA_FX) {
681 for (cfg = 0; cfg < ARRAY_SIZE(old_irq); ++cfg)
682 if (irq == old_irq[cfg])
683 return cfg;
684 } else {
685 for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg)
686 if (irq == valid_irq[cfg])
687 return cfg;
688 }
689
690 return INVALID_IRQ;
691}
692
693/*
694 * Perform certain arcane port-checks to see whether there
695 * is a SoundScape board lurking behind the given ports.
696 */
697static int detect_sscape(struct soundscape *s, long wss_io)
698{
699 unsigned long flags;
700 unsigned d;
701 int retval = 0;
702
703 spin_lock_irqsave(&s->lock, flags);
704
705 /*
706 * The following code is lifted from the original OSS driver,
707 * and as I don't have a datasheet I cannot really comment
708 * on what it is doing...
709 */
710 if ((inb(HOST_CTRL_IO(s->io_base)) & 0x78) != 0)
711 goto _done;
712
713 d = inb(ODIE_ADDR_IO(s->io_base)) & 0xf0;
714 if ((d & 0x80) != 0)
715 goto _done;
716
717 if (d == 0)
718 s->ic_type = IC_ODIE;
719 else if ((d & 0x60) != 0)
720 s->ic_type = IC_OPUS;
721 else
722 goto _done;
723
724 outb(0xfa, ODIE_ADDR_IO(s->io_base));
725 if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0a)
726 goto _done;
727
728 outb(0xfe, ODIE_ADDR_IO(s->io_base));
729 if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0e)
730 goto _done;
731
732 outb(0xfe, ODIE_ADDR_IO(s->io_base));
733 d = inb(ODIE_DATA_IO(s->io_base));
734 if (s->type != SSCAPE_VIVO && (d & 0x9f) != 0x0e)
735 goto _done;
736
737 if (s->ic_type == IC_OPUS)
738 activate_ad1845_unsafe(s->io_base);
739
740 if (s->type == SSCAPE_VIVO)
741 wss_io += 4;
742
743 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
744 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
745
746 /* wait for WSS codec */
747 for (d = 0; d < 500; d++) {
748 if ((inb(wss_io) & 0x80) == 0)
749 break;
750 spin_unlock_irqrestore(&s->lock, flags);
751 msleep(1);
752 spin_lock_irqsave(&s->lock, flags);
753 }
754
755 if ((inb(wss_io) & 0x80) != 0)
756 goto _done;
757
758 if (inb(wss_io + 2) == 0xff)
759 goto _done;
760
761 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f;
762 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d);
763
764 if ((inb(wss_io) & 0x80) != 0)
765 s->type = MEDIA_FX;
766
767 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
768 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
769 /* wait for WSS codec */
770 for (d = 0; d < 500; d++) {
771 if ((inb(wss_io) & 0x80) == 0)
772 break;
773 spin_unlock_irqrestore(&s->lock, flags);
774 msleep(1);
775 spin_lock_irqsave(&s->lock, flags);
776 }
777
778 /*
779 * SoundScape successfully detected!
780 */
781 retval = 1;
782
783_done:
784 spin_unlock_irqrestore(&s->lock, flags);
785 return retval;
786}
787
788/*
789 * ALSA callback function, called when attempting to open the MIDI device.
790 * Check that the MIDI firmware has been loaded, because we don't want
791 * to crash the machine. Also check that someone isn't using the hardware
792 * IOCTL device.
793 */
794static int mpu401_open(struct snd_mpu401 *mpu)
795{
796 if (!verify_mpu401(mpu)) {
797 snd_printk(KERN_ERR "sscape: MIDI disabled, "
798 "please load firmware\n");
799 return -ENODEV;
800 }
801
802 return 0;
803}
804
805/*
806 * Initialise an MPU-401 subdevice for MIDI support on the SoundScape.
807 */
808static int create_mpu401(struct snd_card *card, int devnum,
809 unsigned long port, int irq)
810{
811 struct soundscape *sscape = get_card_soundscape(card);
812 struct snd_rawmidi *rawmidi;
813 int err;
814
815 err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
816 MPU401_INFO_INTEGRATED, irq, &rawmidi);
817 if (err == 0) {
818 struct snd_mpu401 *mpu = rawmidi->private_data;
819 mpu->open_input = mpu401_open;
820 mpu->open_output = mpu401_open;
821 mpu->private_data = sscape;
822
823 initialise_mpu401(mpu);
824 }
825
826 return err;
827}
828
829
830/*
831 * Create an AD1845 PCM subdevice on the SoundScape. The AD1845
832 * is very much like a CS4231, with a few extra bits. We will
833 * try to support at least some of the extra bits by overriding
834 * some of the CS4231 callback.
835 */
836static int create_ad1845(struct snd_card *card, unsigned port,
837 int irq, int dma1, int dma2)
838{
839 register struct soundscape *sscape = get_card_soundscape(card);
840 struct snd_wss *chip;
841 int err;
842 int codec_type = WSS_HW_DETECT;
843
844 switch (sscape->type) {
845 case MEDIA_FX:
846 case SSCAPE:
847 /*
848 * There are some freak examples of early Soundscape cards
849 * with CS4231 instead of AD1848/CS4248. Unfortunately, the
850 * CS4231 works only in CS4248 compatibility mode on
851 * these cards so force it.
852 */
853 if (sscape->ic_type != IC_OPUS)
854 codec_type = WSS_HW_AD1848;
855 break;
856
857 case SSCAPE_VIVO:
858 port += 4;
859 break;
860 default:
861 break;
862 }
863
864 err = snd_wss_create(card, port, -1, irq, dma1, dma2,
865 codec_type, WSS_HWSHARE_DMA1, &chip);
866 if (!err) {
867 unsigned long flags;
868
869 if (sscape->type != SSCAPE_VIVO) {
870 /*
871 * The input clock frequency on the SoundScape must
872 * be 14.31818 MHz, because we must set this register
873 * to get the playback to sound correct ...
874 */
875 snd_wss_mce_up(chip);
876 spin_lock_irqsave(&chip->reg_lock, flags);
877 snd_wss_out(chip, AD1845_CLOCK, 0x20);
878 spin_unlock_irqrestore(&chip->reg_lock, flags);
879 snd_wss_mce_down(chip);
880
881 }
882
883 err = snd_wss_pcm(chip, 0);
884 if (err < 0) {
885 snd_printk(KERN_ERR "sscape: No PCM device "
886 "for AD1845 chip\n");
887 goto _error;
888 }
889
890 err = snd_wss_mixer(chip);
891 if (err < 0) {
892 snd_printk(KERN_ERR "sscape: No mixer device "
893 "for AD1845 chip\n");
894 goto _error;
895 }
896 if (chip->hardware != WSS_HW_AD1848) {
897 err = snd_wss_timer(chip, 0);
898 if (err < 0) {
899 snd_printk(KERN_ERR "sscape: No timer device "
900 "for AD1845 chip\n");
901 goto _error;
902 }
903 }
904
905 if (sscape->type != SSCAPE_VIVO) {
906 err = snd_ctl_add(card,
907 snd_ctl_new1(&midi_mixer_ctl, chip));
908 if (err < 0) {
909 snd_printk(KERN_ERR "sscape: Could not create "
910 "MIDI mixer control\n");
911 goto _error;
912 }
913 }
914
915 sscape->chip = chip;
916 }
917
918_error:
919 return err;
920}
921
922
923/*
924 * Create an ALSA soundcard entry for the SoundScape, using
925 * the given list of port, IRQ and DMA resources.
926 */
927static int create_sscape(int dev, struct snd_card *card)
928{
929 struct soundscape *sscape = get_card_soundscape(card);
930 unsigned dma_cfg;
931 unsigned irq_cfg;
932 unsigned mpu_irq_cfg;
933 struct resource *io_res;
934 struct resource *wss_res;
935 unsigned long flags;
936 int err;
937 int val;
938 const char *name;
939
940 /*
941 * Grab IO ports that we will need to probe so that we
942 * can detect and control this hardware ...
943 */
944 io_res = request_region(port[dev], 8, "SoundScape");
945 if (!io_res) {
946 snd_printk(KERN_ERR
947 "sscape: can't grab port 0x%lx\n", port[dev]);
948 return -EBUSY;
949 }
950 wss_res = NULL;
951 if (sscape->type == SSCAPE_VIVO) {
952 wss_res = request_region(wss_port[dev], 4, "SoundScape");
953 if (!wss_res) {
954 snd_printk(KERN_ERR "sscape: can't grab port 0x%lx\n",
955 wss_port[dev]);
956 err = -EBUSY;
957 goto _release_region;
958 }
959 }
960
961 /*
962 * Grab one DMA channel ...
963 */
964 err = request_dma(dma[dev], "SoundScape");
965 if (err < 0) {
966 snd_printk(KERN_ERR "sscape: can't grab DMA %d\n", dma[dev]);
967 goto _release_region;
968 }
969
970 spin_lock_init(&sscape->lock);
971 sscape->io_res = io_res;
972 sscape->wss_res = wss_res;
973 sscape->io_base = port[dev];
974
975 if (!detect_sscape(sscape, wss_port[dev])) {
976 printk(KERN_ERR "sscape: hardware not detected at 0x%x\n",
977 sscape->io_base);
978 err = -ENODEV;
979 goto _release_dma;
980 }
981
982 switch (sscape->type) {
983 case MEDIA_FX:
984 name = "MediaFX/SoundFX";
985 break;
986 case SSCAPE:
987 name = "Soundscape";
988 break;
989 case SSCAPE_PNP:
990 name = "Soundscape PnP";
991 break;
992 case SSCAPE_VIVO:
993 name = "Soundscape VIVO";
994 break;
995 default:
996 name = "unknown Soundscape";
997 break;
998 }
999
1000 printk(KERN_INFO "sscape: %s card detected at 0x%x, using IRQ %d, DMA %d\n",
1001 name, sscape->io_base, irq[dev], dma[dev]);
1002
1003 /*
1004 * Check that the user didn't pass us garbage data ...
1005 */
1006 irq_cfg = get_irq_config(sscape->type, irq[dev]);
1007 if (irq_cfg == INVALID_IRQ) {
1008 snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]);
1009 err = -ENXIO;
1010 goto _release_dma;
1011 }
1012
1013 mpu_irq_cfg = get_irq_config(sscape->type, mpu_irq[dev]);
1014 if (mpu_irq_cfg == INVALID_IRQ) {
1015 snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
1016 err = -ENXIO;
1017 goto _release_dma;
1018 }
1019
1020 /*
1021 * Tell the on-board devices where their resources are (I think -
1022 * I can't be sure without a datasheet ... So many magic values!)
1023 */
1024 spin_lock_irqsave(&sscape->lock, flags);
1025
1026 sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e);
1027 sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00);
1028
1029 /*
1030 * Enable and configure the DMA channels ...
1031 */
1032 sscape_write_unsafe(sscape->io_base, GA_DMACFG_REG, 0x50);
1033 dma_cfg = (sscape->ic_type == IC_OPUS ? 0x40 : 0x70);
1034 sscape_write_unsafe(sscape->io_base, GA_DMAA_REG, dma_cfg);
1035 sscape_write_unsafe(sscape->io_base, GA_DMAB_REG, 0x20);
1036
1037 mpu_irq_cfg |= mpu_irq_cfg << 2;
1038 val = sscape_read_unsafe(sscape->io_base, GA_HMCTL_REG) & 0xF7;
1039 if (joystick[dev])
1040 val |= 8;
1041 sscape_write_unsafe(sscape->io_base, GA_HMCTL_REG, val | 0x10);
1042 sscape_write_unsafe(sscape->io_base, GA_INTCFG_REG, 0xf0 | mpu_irq_cfg);
1043 sscape_write_unsafe(sscape->io_base,
1044 GA_CDCFG_REG, 0x09 | DMA_8BIT
1045 | (dma[dev] << 4) | (irq_cfg << 1));
1046 /*
1047 * Enable the master IRQ ...
1048 */
1049 sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x80);
1050
1051 spin_unlock_irqrestore(&sscape->lock, flags);
1052
1053 /*
1054 * We have now enabled the codec chip, and so we should
1055 * detect the AD1845 device ...
1056 */
1057 err = create_ad1845(card, wss_port[dev], irq[dev],
1058 dma[dev], dma2[dev]);
1059 if (err < 0) {
1060 snd_printk(KERN_ERR
1061 "sscape: No AD1845 device at 0x%lx, IRQ %d\n",
1062 wss_port[dev], irq[dev]);
1063 goto _release_dma;
1064 }
1065 strcpy(card->driver, "SoundScape");
1066 strcpy(card->shortname, name);
1067 snprintf(card->longname, sizeof(card->longname),
1068 "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n",
1069 name, sscape->chip->port, sscape->chip->irq,
1070 sscape->chip->dma1, sscape->chip->dma2);
1071
1072#define MIDI_DEVNUM 0
1073 if (sscape->type != SSCAPE_VIVO) {
1074 err = sscape_upload_bootblock(card);
1075 if (err >= 0)
1076 err = sscape_upload_microcode(card, err);
1077
1078 if (err == 0) {
1079 err = create_mpu401(card, MIDI_DEVNUM, port[dev],
1080 mpu_irq[dev]);
1081 if (err < 0) {
1082 snd_printk(KERN_ERR "sscape: Failed to create "
1083 "MPU-401 device at 0x%lx\n",
1084 port[dev]);
1085 goto _release_dma;
1086 }
1087
1088 /*
1089 * Initialize mixer
1090 */
1091 spin_lock_irqsave(&sscape->lock, flags);
1092 sscape->midi_vol = 0;
1093 host_write_ctrl_unsafe(sscape->io_base,
1094 CMD_SET_MIDI_VOL, 100);
1095 host_write_ctrl_unsafe(sscape->io_base,
1096 sscape->midi_vol, 100);
1097 host_write_ctrl_unsafe(sscape->io_base,
1098 CMD_XXX_MIDI_VOL, 100);
1099 host_write_ctrl_unsafe(sscape->io_base,
1100 sscape->midi_vol, 100);
1101 host_write_ctrl_unsafe(sscape->io_base,
1102 CMD_SET_EXTMIDI, 100);
1103 host_write_ctrl_unsafe(sscape->io_base,
1104 0, 100);
1105 host_write_ctrl_unsafe(sscape->io_base, CMD_ACK, 100);
1106
1107 set_midi_mode_unsafe(sscape->io_base);
1108 spin_unlock_irqrestore(&sscape->lock, flags);
1109 }
1110 }
1111
1112 /*
1113 * Now that we have successfully created this sound card,
1114 * it is safe to store the pointer.
1115 * NOTE: we only register the sound card's "destructor"
1116 * function now that our "constructor" has completed.
1117 */
1118 card->private_free = soundscape_free;
1119
1120 return 0;
1121
1122_release_dma:
1123 free_dma(dma[dev]);
1124
1125_release_region:
1126 release_and_free_resource(wss_res);
1127 release_and_free_resource(io_res);
1128
1129 return err;
1130}
1131
1132
1133static int snd_sscape_match(struct device *pdev, unsigned int i)
1134{
1135 /*
1136 * Make sure we were given ALL of the other parameters.
1137 */
1138 if (port[i] == SNDRV_AUTO_PORT)
1139 return 0;
1140
1141 if (irq[i] == SNDRV_AUTO_IRQ ||
1142 mpu_irq[i] == SNDRV_AUTO_IRQ ||
1143 dma[i] == SNDRV_AUTO_DMA) {
1144 printk(KERN_INFO
1145 "sscape: insufficient parameters, "
1146 "need IO, IRQ, MPU-IRQ and DMA\n");
1147 return 0;
1148 }
1149
1150 return 1;
1151}
1152
1153static int snd_sscape_probe(struct device *pdev, unsigned int dev)
1154{
1155 struct snd_card *card;
1156 struct soundscape *sscape;
1157 int ret;
1158
1159 ret = snd_card_new(pdev, index[dev], id[dev], THIS_MODULE,
1160 sizeof(struct soundscape), &card);
1161 if (ret < 0)
1162 return ret;
1163
1164 sscape = get_card_soundscape(card);
1165 sscape->type = SSCAPE;
1166
1167 dma[dev] &= 0x03;
1168
1169 ret = create_sscape(dev, card);
1170 if (ret < 0)
1171 goto _release_card;
1172
1173 ret = snd_card_register(card);
1174 if (ret < 0) {
1175 snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
1176 goto _release_card;
1177 }
1178 dev_set_drvdata(pdev, card);
1179 return 0;
1180
1181_release_card:
1182 snd_card_free(card);
1183 return ret;
1184}
1185
1186static int snd_sscape_remove(struct device *devptr, unsigned int dev)
1187{
1188 snd_card_free(dev_get_drvdata(devptr));
1189 return 0;
1190}
1191
1192#define DEV_NAME "sscape"
1193
1194static struct isa_driver snd_sscape_driver = {
1195 .match = snd_sscape_match,
1196 .probe = snd_sscape_probe,
1197 .remove = snd_sscape_remove,
1198 /* FIXME: suspend/resume */
1199 .driver = {
1200 .name = DEV_NAME
1201 },
1202};
1203
1204#ifdef CONFIG_PNP
1205static inline int get_next_autoindex(int i)
1206{
1207 while (i < SNDRV_CARDS && port[i] != SNDRV_AUTO_PORT)
1208 ++i;
1209 return i;
1210}
1211
1212
1213static int sscape_pnp_detect(struct pnp_card_link *pcard,
1214 const struct pnp_card_device_id *pid)
1215{
1216 static int idx = 0;
1217 struct pnp_dev *dev;
1218 struct snd_card *card;
1219 struct soundscape *sscape;
1220 int ret;
1221
1222 /*
1223 * Allow this function to fail *quietly* if all the ISA PnP
1224 * devices were configured using module parameters instead.
1225 */
1226 idx = get_next_autoindex(idx);
1227 if (idx >= SNDRV_CARDS)
1228 return -ENOSPC;
1229
1230 /*
1231 * Check that we still have room for another sound card ...
1232 */
1233 dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL);
1234 if (!dev)
1235 return -ENODEV;
1236
1237 if (!pnp_is_active(dev)) {
1238 if (pnp_activate_dev(dev) < 0) {
1239 snd_printk(KERN_INFO "sscape: device is inactive\n");
1240 return -EBUSY;
1241 }
1242 }
1243
1244 /*
1245 * Create a new ALSA sound card entry, in anticipation
1246 * of detecting our hardware ...
1247 */
1248 ret = snd_card_new(&pcard->card->dev,
1249 index[idx], id[idx], THIS_MODULE,
1250 sizeof(struct soundscape), &card);
1251 if (ret < 0)
1252 return ret;
1253
1254 sscape = get_card_soundscape(card);
1255
1256 /*
1257 * Identify card model ...
1258 */
1259 if (!strncmp("ENS4081", pid->id, 7))
1260 sscape->type = SSCAPE_VIVO;
1261 else
1262 sscape->type = SSCAPE_PNP;
1263
1264 /*
1265 * Read the correct parameters off the ISA PnP bus ...
1266 */
1267 port[idx] = pnp_port_start(dev, 0);
1268 irq[idx] = pnp_irq(dev, 0);
1269 mpu_irq[idx] = pnp_irq(dev, 1);
1270 dma[idx] = pnp_dma(dev, 0) & 0x03;
1271 if (sscape->type == SSCAPE_PNP) {
1272 dma2[idx] = dma[idx];
1273 wss_port[idx] = CODEC_IO(port[idx]);
1274 } else {
1275 wss_port[idx] = pnp_port_start(dev, 1);
1276 dma2[idx] = pnp_dma(dev, 1);
1277 }
1278
1279 ret = create_sscape(idx, card);
1280 if (ret < 0)
1281 goto _release_card;
1282
1283 ret = snd_card_register(card);
1284 if (ret < 0) {
1285 snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
1286 goto _release_card;
1287 }
1288
1289 pnp_set_card_drvdata(pcard, card);
1290 ++idx;
1291 return 0;
1292
1293_release_card:
1294 snd_card_free(card);
1295 return ret;
1296}
1297
1298static void sscape_pnp_remove(struct pnp_card_link *pcard)
1299{
1300 snd_card_free(pnp_get_card_drvdata(pcard));
1301 pnp_set_card_drvdata(pcard, NULL);
1302}
1303
1304static struct pnp_card_driver sscape_pnpc_driver = {
1305 .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
1306 .name = "sscape",
1307 .id_table = sscape_pnpids,
1308 .probe = sscape_pnp_detect,
1309 .remove = sscape_pnp_remove,
1310};
1311
1312#endif /* CONFIG_PNP */
1313
1314static int __init sscape_init(void)
1315{
1316 int err;
1317
1318 err = isa_register_driver(&snd_sscape_driver, SNDRV_CARDS);
1319#ifdef CONFIG_PNP
1320 if (!err)
1321 isa_registered = 1;
1322
1323 err = pnp_register_card_driver(&sscape_pnpc_driver);
1324 if (!err)
1325 pnp_registered = 1;
1326
1327 if (isa_registered)
1328 err = 0;
1329#endif
1330 return err;
1331}
1332
1333static void __exit sscape_exit(void)
1334{
1335#ifdef CONFIG_PNP
1336 if (pnp_registered)
1337 pnp_unregister_card_driver(&sscape_pnpc_driver);
1338 if (isa_registered)
1339#endif
1340 isa_unregister_driver(&snd_sscape_driver);
1341}
1342
1343module_init(sscape_init);
1344module_exit(sscape_exit);
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Low-level ALSA driver for the ENSONIQ SoundScape
4 * Copyright (c) by Chris Rankin
5 *
6 * This driver was written in part using information obtained from
7 * the OSS/Free SoundScape driver, written by Hannu Savolainen.
8 */
9
10#include <linux/init.h>
11#include <linux/err.h>
12#include <linux/io.h>
13#include <linux/isa.h>
14#include <linux/delay.h>
15#include <linux/firmware.h>
16#include <linux/pnp.h>
17#include <linux/spinlock.h>
18#include <linux/module.h>
19#include <asm/dma.h>
20#include <sound/core.h>
21#include <sound/wss.h>
22#include <sound/mpu401.h>
23#include <sound/initval.h>
24
25
26MODULE_AUTHOR("Chris Rankin");
27MODULE_DESCRIPTION("ENSONIQ SoundScape driver");
28MODULE_LICENSE("GPL");
29MODULE_FIRMWARE("sndscape.co0");
30MODULE_FIRMWARE("sndscape.co1");
31MODULE_FIRMWARE("sndscape.co2");
32MODULE_FIRMWARE("sndscape.co3");
33MODULE_FIRMWARE("sndscape.co4");
34MODULE_FIRMWARE("scope.cod");
35
36static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
37static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
38static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
39static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
40static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
41static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
42static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
43static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
44static bool joystick[SNDRV_CARDS];
45
46module_param_array(index, int, NULL, 0444);
47MODULE_PARM_DESC(index, "Index number for SoundScape soundcard");
48
49module_param_array(id, charp, NULL, 0444);
50MODULE_PARM_DESC(id, "Description for SoundScape card");
51
52module_param_hw_array(port, long, ioport, NULL, 0444);
53MODULE_PARM_DESC(port, "Port # for SoundScape driver.");
54
55module_param_hw_array(wss_port, long, ioport, NULL, 0444);
56MODULE_PARM_DESC(wss_port, "WSS Port # for SoundScape driver.");
57
58module_param_hw_array(irq, int, irq, NULL, 0444);
59MODULE_PARM_DESC(irq, "IRQ # for SoundScape driver.");
60
61module_param_hw_array(mpu_irq, int, irq, NULL, 0444);
62MODULE_PARM_DESC(mpu_irq, "MPU401 IRQ # for SoundScape driver.");
63
64module_param_hw_array(dma, int, dma, NULL, 0444);
65MODULE_PARM_DESC(dma, "DMA # for SoundScape driver.");
66
67module_param_hw_array(dma2, int, dma, NULL, 0444);
68MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver.");
69
70module_param_array(joystick, bool, NULL, 0444);
71MODULE_PARM_DESC(joystick, "Enable gameport.");
72
73#ifdef CONFIG_PNP
74static int isa_registered;
75static int pnp_registered;
76
77static const struct pnp_card_device_id sscape_pnpids[] = {
78 { .id = "ENS3081", .devs = { { "ENS0000" } } }, /* Soundscape PnP */
79 { .id = "ENS4081", .devs = { { "ENS1011" } } }, /* VIVO90 */
80 { .id = "" } /* end */
81};
82
83MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids);
84#endif
85
86
87#define HOST_CTRL_IO(i) ((i) + 2)
88#define HOST_DATA_IO(i) ((i) + 3)
89#define ODIE_ADDR_IO(i) ((i) + 4)
90#define ODIE_DATA_IO(i) ((i) + 5)
91#define CODEC_IO(i) ((i) + 8)
92
93#define IC_ODIE 1
94#define IC_OPUS 2
95
96#define RX_READY 0x01
97#define TX_READY 0x02
98
99#define CMD_ACK 0x80
100#define CMD_SET_MIDI_VOL 0x84
101#define CMD_GET_MIDI_VOL 0x85
102#define CMD_XXX_MIDI_VOL 0x86
103#define CMD_SET_EXTMIDI 0x8a
104#define CMD_GET_EXTMIDI 0x8b
105#define CMD_SET_MT32 0x8c
106#define CMD_GET_MT32 0x8d
107
108enum GA_REG {
109 GA_INTSTAT_REG = 0,
110 GA_INTENA_REG,
111 GA_DMAA_REG,
112 GA_DMAB_REG,
113 GA_INTCFG_REG,
114 GA_DMACFG_REG,
115 GA_CDCFG_REG,
116 GA_SMCFGA_REG,
117 GA_SMCFGB_REG,
118 GA_HMCTL_REG
119};
120
121#define DMA_8BIT 0x80
122
123
124enum card_type {
125 MEDIA_FX, /* Sequoia S-1000 */
126 SSCAPE, /* Sequoia S-2000 */
127 SSCAPE_PNP,
128 SSCAPE_VIVO,
129};
130
131struct soundscape {
132 spinlock_t lock;
133 unsigned io_base;
134 int ic_type;
135 enum card_type type;
136 struct resource *io_res;
137 struct resource *wss_res;
138 struct snd_wss *chip;
139
140 unsigned char midi_vol;
141};
142
143#define INVALID_IRQ ((unsigned)-1)
144
145
146static inline struct soundscape *get_card_soundscape(struct snd_card *c)
147{
148 return (struct soundscape *) (c->private_data);
149}
150
151/*
152 * Allocates some kernel memory that we can use for DMA.
153 * I think this means that the memory has to map to
154 * contiguous pages of physical memory.
155 */
156static struct snd_dma_buffer *get_dmabuf(struct soundscape *s,
157 struct snd_dma_buffer *buf,
158 unsigned long size)
159{
160 if (buf) {
161 if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV,
162 s->chip->card->dev,
163 size, buf) < 0) {
164 snd_printk(KERN_ERR "sscape: Failed to allocate "
165 "%lu bytes for DMA\n",
166 size);
167 return NULL;
168 }
169 }
170
171 return buf;
172}
173
174/*
175 * Release the DMA-able kernel memory ...
176 */
177static void free_dmabuf(struct snd_dma_buffer *buf)
178{
179 if (buf && buf->area)
180 snd_dma_free_pages(buf);
181}
182
183/*
184 * This function writes to the SoundScape's control registers,
185 * but doesn't do any locking. It's up to the caller to do that.
186 * This is why this function is "unsafe" ...
187 */
188static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg,
189 unsigned char val)
190{
191 outb(reg, ODIE_ADDR_IO(io_base));
192 outb(val, ODIE_DATA_IO(io_base));
193}
194
195/*
196 * Write to the SoundScape's control registers, and do the
197 * necessary locking ...
198 */
199static void sscape_write(struct soundscape *s, enum GA_REG reg,
200 unsigned char val)
201{
202 unsigned long flags;
203
204 spin_lock_irqsave(&s->lock, flags);
205 sscape_write_unsafe(s->io_base, reg, val);
206 spin_unlock_irqrestore(&s->lock, flags);
207}
208
209/*
210 * Read from the SoundScape's control registers, but leave any
211 * locking to the caller. This is why the function is "unsafe" ...
212 */
213static inline unsigned char sscape_read_unsafe(unsigned io_base,
214 enum GA_REG reg)
215{
216 outb(reg, ODIE_ADDR_IO(io_base));
217 return inb(ODIE_DATA_IO(io_base));
218}
219
220/*
221 * Puts the SoundScape into "host" mode, as compared to "MIDI" mode
222 */
223static inline void set_host_mode_unsafe(unsigned io_base)
224{
225 outb(0x0, HOST_CTRL_IO(io_base));
226}
227
228/*
229 * Puts the SoundScape into "MIDI" mode, as compared to "host" mode
230 */
231static inline void set_midi_mode_unsafe(unsigned io_base)
232{
233 outb(0x3, HOST_CTRL_IO(io_base));
234}
235
236/*
237 * Read the SoundScape's host-mode control register, but leave
238 * any locking issues to the caller ...
239 */
240static inline int host_read_unsafe(unsigned io_base)
241{
242 int data = -1;
243 if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0)
244 data = inb(HOST_DATA_IO(io_base));
245
246 return data;
247}
248
249/*
250 * Read the SoundScape's host-mode control register, performing
251 * a limited amount of busy-waiting if the register isn't ready.
252 * Also leaves all locking-issues to the caller ...
253 */
254static int host_read_ctrl_unsafe(unsigned io_base, unsigned timeout)
255{
256 int data;
257
258 while (((data = host_read_unsafe(io_base)) < 0) && (timeout != 0)) {
259 udelay(100);
260 --timeout;
261 } /* while */
262
263 return data;
264}
265
266/*
267 * Write to the SoundScape's host-mode control registers, but
268 * leave any locking issues to the caller ...
269 */
270static inline int host_write_unsafe(unsigned io_base, unsigned char data)
271{
272 if ((inb(HOST_CTRL_IO(io_base)) & TX_READY) != 0) {
273 outb(data, HOST_DATA_IO(io_base));
274 return 1;
275 }
276
277 return 0;
278}
279
280/*
281 * Write to the SoundScape's host-mode control registers, performing
282 * a limited amount of busy-waiting if the register isn't ready.
283 * Also leaves all locking-issues to the caller ...
284 */
285static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data,
286 unsigned timeout)
287{
288 int err;
289
290 while (!(err = host_write_unsafe(io_base, data)) && (timeout != 0)) {
291 udelay(100);
292 --timeout;
293 } /* while */
294
295 return err;
296}
297
298
299/*
300 * Check that the MIDI subsystem is operational. If it isn't,
301 * then we will hang the computer if we try to use it ...
302 *
303 * NOTE: This check is based upon observation, not documentation.
304 */
305static inline int verify_mpu401(const struct snd_mpu401 *mpu)
306{
307 return ((inb(MPU401C(mpu)) & 0xc0) == 0x80);
308}
309
310/*
311 * This is apparently the standard way to initialise an MPU-401
312 */
313static inline void initialise_mpu401(const struct snd_mpu401 *mpu)
314{
315 outb(0, MPU401D(mpu));
316}
317
318/*
319 * Tell the SoundScape to activate the AD1845 chip (I think).
320 * The AD1845 detection fails if we *don't* do this, so I
321 * think that this is a good idea ...
322 */
323static void activate_ad1845_unsafe(unsigned io_base)
324{
325 unsigned char val = sscape_read_unsafe(io_base, GA_HMCTL_REG);
326 sscape_write_unsafe(io_base, GA_HMCTL_REG, (val & 0xcf) | 0x10);
327 sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80);
328}
329
330/*
331 * Tell the SoundScape to begin a DMA transfer using the given channel.
332 * All locking issues are left to the caller.
333 */
334static void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg)
335{
336 sscape_write_unsafe(io_base, reg,
337 sscape_read_unsafe(io_base, reg) | 0x01);
338 sscape_write_unsafe(io_base, reg,
339 sscape_read_unsafe(io_base, reg) & 0xfe);
340}
341
342/*
343 * Wait for a DMA transfer to complete. This is a "limited busy-wait",
344 * and all locking issues are left to the caller.
345 */
346static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg,
347 unsigned timeout)
348{
349 while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) {
350 udelay(100);
351 --timeout;
352 } /* while */
353
354 return sscape_read_unsafe(io_base, reg) & 0x01;
355}
356
357/*
358 * Wait for the On-Board Processor to return its start-up
359 * acknowledgement sequence. This wait is too long for
360 * us to perform "busy-waiting", and so we must sleep.
361 * This in turn means that we must not be holding any
362 * spinlocks when we call this function.
363 */
364static int obp_startup_ack(struct soundscape *s, unsigned timeout)
365{
366 unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
367
368 do {
369 unsigned long flags;
370 int x;
371
372 spin_lock_irqsave(&s->lock, flags);
373 x = host_read_unsafe(s->io_base);
374 spin_unlock_irqrestore(&s->lock, flags);
375 if (x == 0xfe || x == 0xff)
376 return 1;
377
378 msleep(10);
379 } while (time_before(jiffies, end_time));
380
381 return 0;
382}
383
384/*
385 * Wait for the host to return its start-up acknowledgement
386 * sequence. This wait is too long for us to perform
387 * "busy-waiting", and so we must sleep. This in turn means
388 * that we must not be holding any spinlocks when we call
389 * this function.
390 */
391static int host_startup_ack(struct soundscape *s, unsigned timeout)
392{
393 unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
394
395 do {
396 unsigned long flags;
397 int x;
398
399 spin_lock_irqsave(&s->lock, flags);
400 x = host_read_unsafe(s->io_base);
401 spin_unlock_irqrestore(&s->lock, flags);
402 if (x == 0xfe)
403 return 1;
404
405 msleep(10);
406 } while (time_before(jiffies, end_time));
407
408 return 0;
409}
410
411/*
412 * Upload a byte-stream into the SoundScape using DMA channel A.
413 */
414static int upload_dma_data(struct soundscape *s, const unsigned char *data,
415 size_t size)
416{
417 unsigned long flags;
418 struct snd_dma_buffer dma;
419 int ret;
420 unsigned char val;
421
422 if (!get_dmabuf(s, &dma, PAGE_ALIGN(32 * 1024)))
423 return -ENOMEM;
424
425 spin_lock_irqsave(&s->lock, flags);
426
427 /*
428 * Reset the board ...
429 */
430 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
431 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val & 0x3f);
432
433 /*
434 * Enable the DMA channels and configure them ...
435 */
436 val = (s->chip->dma1 << 4) | DMA_8BIT;
437 sscape_write_unsafe(s->io_base, GA_DMAA_REG, val);
438 sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20);
439
440 /*
441 * Take the board out of reset ...
442 */
443 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
444 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x80);
445
446 /*
447 * Upload the firmware to the SoundScape
448 * board through the DMA channel ...
449 */
450 while (size != 0) {
451 unsigned long len;
452
453 len = min(size, dma.bytes);
454 memcpy(dma.area, data, len);
455 data += len;
456 size -= len;
457
458 snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE);
459 sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG);
460 if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) {
461 /*
462 * Don't forget to release this spinlock we're holding
463 */
464 spin_unlock_irqrestore(&s->lock, flags);
465
466 snd_printk(KERN_ERR
467 "sscape: DMA upload has timed out\n");
468 ret = -EAGAIN;
469 goto _release_dma;
470 }
471 } /* while */
472
473 set_host_mode_unsafe(s->io_base);
474 outb(0x0, s->io_base);
475
476 /*
477 * Boot the board ... (I think)
478 */
479 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
480 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x40);
481 spin_unlock_irqrestore(&s->lock, flags);
482
483 /*
484 * If all has gone well, then the board should acknowledge
485 * the new upload and tell us that it has rebooted OK. We
486 * give it 5 seconds (max) ...
487 */
488 ret = 0;
489 if (!obp_startup_ack(s, 5000)) {
490 snd_printk(KERN_ERR "sscape: No response "
491 "from on-board processor after upload\n");
492 ret = -EAGAIN;
493 } else if (!host_startup_ack(s, 5000)) {
494 snd_printk(KERN_ERR
495 "sscape: SoundScape failed to initialise\n");
496 ret = -EAGAIN;
497 }
498
499_release_dma:
500 /*
501 * NOTE!!! We are NOT holding any spinlocks at this point !!!
502 */
503 sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_OPUS ? 0x40 : 0x70));
504 free_dmabuf(&dma);
505
506 return ret;
507}
508
509/*
510 * Upload the bootblock(?) into the SoundScape. The only
511 * purpose of this block of code seems to be to tell
512 * us which version of the microcode we should be using.
513 */
514static int sscape_upload_bootblock(struct snd_card *card)
515{
516 struct soundscape *sscape = get_card_soundscape(card);
517 unsigned long flags;
518 const struct firmware *init_fw = NULL;
519 int data = 0;
520 int ret;
521
522 ret = request_firmware(&init_fw, "scope.cod", card->dev);
523 if (ret < 0) {
524 snd_printk(KERN_ERR "sscape: Error loading scope.cod");
525 return ret;
526 }
527 ret = upload_dma_data(sscape, init_fw->data, init_fw->size);
528
529 release_firmware(init_fw);
530
531 spin_lock_irqsave(&sscape->lock, flags);
532 if (ret == 0)
533 data = host_read_ctrl_unsafe(sscape->io_base, 100);
534
535 if (data & 0x10)
536 sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2f);
537
538 spin_unlock_irqrestore(&sscape->lock, flags);
539
540 data &= 0xf;
541 if (ret == 0 && data > 7) {
542 snd_printk(KERN_ERR
543 "sscape: timeout reading firmware version\n");
544 ret = -EAGAIN;
545 }
546
547 return (ret == 0) ? data : ret;
548}
549
550/*
551 * Upload the microcode into the SoundScape.
552 */
553static int sscape_upload_microcode(struct snd_card *card, int version)
554{
555 struct soundscape *sscape = get_card_soundscape(card);
556 const struct firmware *init_fw = NULL;
557 char name[14];
558 int err;
559
560 snprintf(name, sizeof(name), "sndscape.co%d", version);
561
562 err = request_firmware(&init_fw, name, card->dev);
563 if (err < 0) {
564 snd_printk(KERN_ERR "sscape: Error loading sndscape.co%d",
565 version);
566 return err;
567 }
568 err = upload_dma_data(sscape, init_fw->data, init_fw->size);
569 if (err == 0)
570 snd_printk(KERN_INFO "sscape: MIDI firmware loaded %zu KBs\n",
571 init_fw->size >> 10);
572
573 release_firmware(init_fw);
574
575 return err;
576}
577
578/*
579 * Mixer control for the SoundScape's MIDI device.
580 */
581static int sscape_midi_info(struct snd_kcontrol *ctl,
582 struct snd_ctl_elem_info *uinfo)
583{
584 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
585 uinfo->count = 1;
586 uinfo->value.integer.min = 0;
587 uinfo->value.integer.max = 127;
588 return 0;
589}
590
591static int sscape_midi_get(struct snd_kcontrol *kctl,
592 struct snd_ctl_elem_value *uctl)
593{
594 struct snd_wss *chip = snd_kcontrol_chip(kctl);
595 struct snd_card *card = chip->card;
596 register struct soundscape *s = get_card_soundscape(card);
597 unsigned long flags;
598
599 spin_lock_irqsave(&s->lock, flags);
600 uctl->value.integer.value[0] = s->midi_vol;
601 spin_unlock_irqrestore(&s->lock, flags);
602 return 0;
603}
604
605static int sscape_midi_put(struct snd_kcontrol *kctl,
606 struct snd_ctl_elem_value *uctl)
607{
608 struct snd_wss *chip = snd_kcontrol_chip(kctl);
609 struct snd_card *card = chip->card;
610 struct soundscape *s = get_card_soundscape(card);
611 unsigned long flags;
612 int change;
613 unsigned char new_val;
614
615 spin_lock_irqsave(&s->lock, flags);
616
617 new_val = uctl->value.integer.value[0] & 127;
618 /*
619 * We need to put the board into HOST mode before we
620 * can send any volume-changing HOST commands ...
621 */
622 set_host_mode_unsafe(s->io_base);
623
624 /*
625 * To successfully change the MIDI volume setting, you seem to
626 * have to write a volume command, write the new volume value,
627 * and then perform another volume-related command. Perhaps the
628 * first command is an "open" and the second command is a "close"?
629 */
630 if (s->midi_vol == new_val) {
631 change = 0;
632 goto __skip_change;
633 }
634 change = host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
635 && host_write_ctrl_unsafe(s->io_base, new_val, 100)
636 && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)
637 && host_write_ctrl_unsafe(s->io_base, new_val, 100);
638 s->midi_vol = new_val;
639__skip_change:
640
641 /*
642 * Take the board out of HOST mode and back into MIDI mode ...
643 */
644 set_midi_mode_unsafe(s->io_base);
645
646 spin_unlock_irqrestore(&s->lock, flags);
647 return change;
648}
649
650static const struct snd_kcontrol_new midi_mixer_ctl = {
651 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
652 .name = "MIDI",
653 .info = sscape_midi_info,
654 .get = sscape_midi_get,
655 .put = sscape_midi_put
656};
657
658/*
659 * The SoundScape can use two IRQs from a possible set of four.
660 * These IRQs are encoded as bit patterns so that they can be
661 * written to the control registers.
662 */
663static unsigned get_irq_config(int sscape_type, int irq)
664{
665 static const int valid_irq[] = { 9, 5, 7, 10 };
666 static const int old_irq[] = { 9, 7, 5, 15 };
667 unsigned cfg;
668
669 if (sscape_type == MEDIA_FX) {
670 for (cfg = 0; cfg < ARRAY_SIZE(old_irq); ++cfg)
671 if (irq == old_irq[cfg])
672 return cfg;
673 } else {
674 for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg)
675 if (irq == valid_irq[cfg])
676 return cfg;
677 }
678
679 return INVALID_IRQ;
680}
681
682/*
683 * Perform certain arcane port-checks to see whether there
684 * is a SoundScape board lurking behind the given ports.
685 */
686static int detect_sscape(struct soundscape *s, long wss_io)
687{
688 unsigned long flags;
689 unsigned d;
690 int retval = 0;
691
692 spin_lock_irqsave(&s->lock, flags);
693
694 /*
695 * The following code is lifted from the original OSS driver,
696 * and as I don't have a datasheet I cannot really comment
697 * on what it is doing...
698 */
699 if ((inb(HOST_CTRL_IO(s->io_base)) & 0x78) != 0)
700 goto _done;
701
702 d = inb(ODIE_ADDR_IO(s->io_base)) & 0xf0;
703 if ((d & 0x80) != 0)
704 goto _done;
705
706 if (d == 0)
707 s->ic_type = IC_ODIE;
708 else if ((d & 0x60) != 0)
709 s->ic_type = IC_OPUS;
710 else
711 goto _done;
712
713 outb(0xfa, ODIE_ADDR_IO(s->io_base));
714 if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0a)
715 goto _done;
716
717 outb(0xfe, ODIE_ADDR_IO(s->io_base));
718 if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0e)
719 goto _done;
720
721 outb(0xfe, ODIE_ADDR_IO(s->io_base));
722 d = inb(ODIE_DATA_IO(s->io_base));
723 if (s->type != SSCAPE_VIVO && (d & 0x9f) != 0x0e)
724 goto _done;
725
726 if (s->ic_type == IC_OPUS)
727 activate_ad1845_unsafe(s->io_base);
728
729 if (s->type == SSCAPE_VIVO)
730 wss_io += 4;
731
732 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
733 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
734
735 /* wait for WSS codec */
736 for (d = 0; d < 500; d++) {
737 if ((inb(wss_io) & 0x80) == 0)
738 break;
739 spin_unlock_irqrestore(&s->lock, flags);
740 msleep(1);
741 spin_lock_irqsave(&s->lock, flags);
742 }
743
744 if ((inb(wss_io) & 0x80) != 0)
745 goto _done;
746
747 if (inb(wss_io + 2) == 0xff)
748 goto _done;
749
750 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f;
751 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d);
752
753 if ((inb(wss_io) & 0x80) != 0)
754 s->type = MEDIA_FX;
755
756 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
757 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
758 /* wait for WSS codec */
759 for (d = 0; d < 500; d++) {
760 if ((inb(wss_io) & 0x80) == 0)
761 break;
762 spin_unlock_irqrestore(&s->lock, flags);
763 msleep(1);
764 spin_lock_irqsave(&s->lock, flags);
765 }
766
767 /*
768 * SoundScape successfully detected!
769 */
770 retval = 1;
771
772_done:
773 spin_unlock_irqrestore(&s->lock, flags);
774 return retval;
775}
776
777/*
778 * ALSA callback function, called when attempting to open the MIDI device.
779 * Check that the MIDI firmware has been loaded, because we don't want
780 * to crash the machine. Also check that someone isn't using the hardware
781 * IOCTL device.
782 */
783static int mpu401_open(struct snd_mpu401 *mpu)
784{
785 if (!verify_mpu401(mpu)) {
786 snd_printk(KERN_ERR "sscape: MIDI disabled, "
787 "please load firmware\n");
788 return -ENODEV;
789 }
790
791 return 0;
792}
793
794/*
795 * Initialise an MPU-401 subdevice for MIDI support on the SoundScape.
796 */
797static int create_mpu401(struct snd_card *card, int devnum,
798 unsigned long port, int irq)
799{
800 struct soundscape *sscape = get_card_soundscape(card);
801 struct snd_rawmidi *rawmidi;
802 int err;
803
804 err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
805 MPU401_INFO_INTEGRATED, irq, &rawmidi);
806 if (err == 0) {
807 struct snd_mpu401 *mpu = rawmidi->private_data;
808 mpu->open_input = mpu401_open;
809 mpu->open_output = mpu401_open;
810 mpu->private_data = sscape;
811
812 initialise_mpu401(mpu);
813 }
814
815 return err;
816}
817
818
819/*
820 * Create an AD1845 PCM subdevice on the SoundScape. The AD1845
821 * is very much like a CS4231, with a few extra bits. We will
822 * try to support at least some of the extra bits by overriding
823 * some of the CS4231 callback.
824 */
825static int create_ad1845(struct snd_card *card, unsigned port,
826 int irq, int dma1, int dma2)
827{
828 register struct soundscape *sscape = get_card_soundscape(card);
829 struct snd_wss *chip;
830 int err;
831 int codec_type = WSS_HW_DETECT;
832
833 switch (sscape->type) {
834 case MEDIA_FX:
835 case SSCAPE:
836 /*
837 * There are some freak examples of early Soundscape cards
838 * with CS4231 instead of AD1848/CS4248. Unfortunately, the
839 * CS4231 works only in CS4248 compatibility mode on
840 * these cards so force it.
841 */
842 if (sscape->ic_type != IC_OPUS)
843 codec_type = WSS_HW_AD1848;
844 break;
845
846 case SSCAPE_VIVO:
847 port += 4;
848 break;
849 default:
850 break;
851 }
852
853 err = snd_wss_create(card, port, -1, irq, dma1, dma2,
854 codec_type, WSS_HWSHARE_DMA1, &chip);
855 if (!err) {
856 unsigned long flags;
857
858 if (sscape->type != SSCAPE_VIVO) {
859 /*
860 * The input clock frequency on the SoundScape must
861 * be 14.31818 MHz, because we must set this register
862 * to get the playback to sound correct ...
863 */
864 snd_wss_mce_up(chip);
865 spin_lock_irqsave(&chip->reg_lock, flags);
866 snd_wss_out(chip, AD1845_CLOCK, 0x20);
867 spin_unlock_irqrestore(&chip->reg_lock, flags);
868 snd_wss_mce_down(chip);
869
870 }
871
872 err = snd_wss_pcm(chip, 0);
873 if (err < 0) {
874 snd_printk(KERN_ERR "sscape: No PCM device "
875 "for AD1845 chip\n");
876 goto _error;
877 }
878
879 err = snd_wss_mixer(chip);
880 if (err < 0) {
881 snd_printk(KERN_ERR "sscape: No mixer device "
882 "for AD1845 chip\n");
883 goto _error;
884 }
885 if (chip->hardware != WSS_HW_AD1848) {
886 err = snd_wss_timer(chip, 0);
887 if (err < 0) {
888 snd_printk(KERN_ERR "sscape: No timer device "
889 "for AD1845 chip\n");
890 goto _error;
891 }
892 }
893
894 if (sscape->type != SSCAPE_VIVO) {
895 err = snd_ctl_add(card,
896 snd_ctl_new1(&midi_mixer_ctl, chip));
897 if (err < 0) {
898 snd_printk(KERN_ERR "sscape: Could not create "
899 "MIDI mixer control\n");
900 goto _error;
901 }
902 }
903
904 sscape->chip = chip;
905 }
906
907_error:
908 return err;
909}
910
911
912/*
913 * Create an ALSA soundcard entry for the SoundScape, using
914 * the given list of port, IRQ and DMA resources.
915 */
916static int create_sscape(int dev, struct snd_card *card)
917{
918 struct soundscape *sscape = get_card_soundscape(card);
919 unsigned dma_cfg;
920 unsigned irq_cfg;
921 unsigned mpu_irq_cfg;
922 struct resource *io_res;
923 struct resource *wss_res;
924 unsigned long flags;
925 int err;
926 int val;
927 const char *name;
928
929 /*
930 * Grab IO ports that we will need to probe so that we
931 * can detect and control this hardware ...
932 */
933 io_res = devm_request_region(card->dev, port[dev], 8, "SoundScape");
934 if (!io_res) {
935 snd_printk(KERN_ERR
936 "sscape: can't grab port 0x%lx\n", port[dev]);
937 return -EBUSY;
938 }
939 wss_res = NULL;
940 if (sscape->type == SSCAPE_VIVO) {
941 wss_res = devm_request_region(card->dev, wss_port[dev], 4,
942 "SoundScape");
943 if (!wss_res) {
944 snd_printk(KERN_ERR "sscape: can't grab port 0x%lx\n",
945 wss_port[dev]);
946 return -EBUSY;
947 }
948 }
949
950 /*
951 * Grab one DMA channel ...
952 */
953 err = snd_devm_request_dma(card->dev, dma[dev], "SoundScape");
954 if (err < 0) {
955 snd_printk(KERN_ERR "sscape: can't grab DMA %d\n", dma[dev]);
956 return err;
957 }
958
959 spin_lock_init(&sscape->lock);
960 sscape->io_res = io_res;
961 sscape->wss_res = wss_res;
962 sscape->io_base = port[dev];
963
964 if (!detect_sscape(sscape, wss_port[dev])) {
965 printk(KERN_ERR "sscape: hardware not detected at 0x%x\n",
966 sscape->io_base);
967 return -ENODEV;
968 }
969
970 switch (sscape->type) {
971 case MEDIA_FX:
972 name = "MediaFX/SoundFX";
973 break;
974 case SSCAPE:
975 name = "Soundscape";
976 break;
977 case SSCAPE_PNP:
978 name = "Soundscape PnP";
979 break;
980 case SSCAPE_VIVO:
981 name = "Soundscape VIVO";
982 break;
983 default:
984 name = "unknown Soundscape";
985 break;
986 }
987
988 printk(KERN_INFO "sscape: %s card detected at 0x%x, using IRQ %d, DMA %d\n",
989 name, sscape->io_base, irq[dev], dma[dev]);
990
991 /*
992 * Check that the user didn't pass us garbage data ...
993 */
994 irq_cfg = get_irq_config(sscape->type, irq[dev]);
995 if (irq_cfg == INVALID_IRQ) {
996 snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]);
997 return -ENXIO;
998 }
999
1000 mpu_irq_cfg = get_irq_config(sscape->type, mpu_irq[dev]);
1001 if (mpu_irq_cfg == INVALID_IRQ) {
1002 snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
1003 return -ENXIO;
1004 }
1005
1006 /*
1007 * Tell the on-board devices where their resources are (I think -
1008 * I can't be sure without a datasheet ... So many magic values!)
1009 */
1010 spin_lock_irqsave(&sscape->lock, flags);
1011
1012 sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e);
1013 sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00);
1014
1015 /*
1016 * Enable and configure the DMA channels ...
1017 */
1018 sscape_write_unsafe(sscape->io_base, GA_DMACFG_REG, 0x50);
1019 dma_cfg = (sscape->ic_type == IC_OPUS ? 0x40 : 0x70);
1020 sscape_write_unsafe(sscape->io_base, GA_DMAA_REG, dma_cfg);
1021 sscape_write_unsafe(sscape->io_base, GA_DMAB_REG, 0x20);
1022
1023 mpu_irq_cfg |= mpu_irq_cfg << 2;
1024 val = sscape_read_unsafe(sscape->io_base, GA_HMCTL_REG) & 0xF7;
1025 if (joystick[dev])
1026 val |= 8;
1027 sscape_write_unsafe(sscape->io_base, GA_HMCTL_REG, val | 0x10);
1028 sscape_write_unsafe(sscape->io_base, GA_INTCFG_REG, 0xf0 | mpu_irq_cfg);
1029 sscape_write_unsafe(sscape->io_base,
1030 GA_CDCFG_REG, 0x09 | DMA_8BIT
1031 | (dma[dev] << 4) | (irq_cfg << 1));
1032 /*
1033 * Enable the master IRQ ...
1034 */
1035 sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x80);
1036
1037 spin_unlock_irqrestore(&sscape->lock, flags);
1038
1039 /*
1040 * We have now enabled the codec chip, and so we should
1041 * detect the AD1845 device ...
1042 */
1043 err = create_ad1845(card, wss_port[dev], irq[dev],
1044 dma[dev], dma2[dev]);
1045 if (err < 0) {
1046 snd_printk(KERN_ERR
1047 "sscape: No AD1845 device at 0x%lx, IRQ %d\n",
1048 wss_port[dev], irq[dev]);
1049 return err;
1050 }
1051 strcpy(card->driver, "SoundScape");
1052 strcpy(card->shortname, name);
1053 snprintf(card->longname, sizeof(card->longname),
1054 "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n",
1055 name, sscape->chip->port, sscape->chip->irq,
1056 sscape->chip->dma1, sscape->chip->dma2);
1057
1058#define MIDI_DEVNUM 0
1059 if (sscape->type != SSCAPE_VIVO) {
1060 err = sscape_upload_bootblock(card);
1061 if (err >= 0)
1062 err = sscape_upload_microcode(card, err);
1063
1064 if (err == 0) {
1065 err = create_mpu401(card, MIDI_DEVNUM, port[dev],
1066 mpu_irq[dev]);
1067 if (err < 0) {
1068 snd_printk(KERN_ERR "sscape: Failed to create "
1069 "MPU-401 device at 0x%lx\n",
1070 port[dev]);
1071 return err;
1072 }
1073
1074 /*
1075 * Initialize mixer
1076 */
1077 spin_lock_irqsave(&sscape->lock, flags);
1078 sscape->midi_vol = 0;
1079 host_write_ctrl_unsafe(sscape->io_base,
1080 CMD_SET_MIDI_VOL, 100);
1081 host_write_ctrl_unsafe(sscape->io_base,
1082 sscape->midi_vol, 100);
1083 host_write_ctrl_unsafe(sscape->io_base,
1084 CMD_XXX_MIDI_VOL, 100);
1085 host_write_ctrl_unsafe(sscape->io_base,
1086 sscape->midi_vol, 100);
1087 host_write_ctrl_unsafe(sscape->io_base,
1088 CMD_SET_EXTMIDI, 100);
1089 host_write_ctrl_unsafe(sscape->io_base,
1090 0, 100);
1091 host_write_ctrl_unsafe(sscape->io_base, CMD_ACK, 100);
1092
1093 set_midi_mode_unsafe(sscape->io_base);
1094 spin_unlock_irqrestore(&sscape->lock, flags);
1095 }
1096 }
1097
1098 return 0;
1099}
1100
1101
1102static int snd_sscape_match(struct device *pdev, unsigned int i)
1103{
1104 /*
1105 * Make sure we were given ALL of the other parameters.
1106 */
1107 if (port[i] == SNDRV_AUTO_PORT)
1108 return 0;
1109
1110 if (irq[i] == SNDRV_AUTO_IRQ ||
1111 mpu_irq[i] == SNDRV_AUTO_IRQ ||
1112 dma[i] == SNDRV_AUTO_DMA) {
1113 printk(KERN_INFO
1114 "sscape: insufficient parameters, "
1115 "need IO, IRQ, MPU-IRQ and DMA\n");
1116 return 0;
1117 }
1118
1119 return 1;
1120}
1121
1122static int snd_sscape_probe(struct device *pdev, unsigned int dev)
1123{
1124 struct snd_card *card;
1125 struct soundscape *sscape;
1126 int ret;
1127
1128 ret = snd_devm_card_new(pdev, index[dev], id[dev], THIS_MODULE,
1129 sizeof(struct soundscape), &card);
1130 if (ret < 0)
1131 return ret;
1132
1133 sscape = get_card_soundscape(card);
1134 sscape->type = SSCAPE;
1135
1136 dma[dev] &= 0x03;
1137
1138 ret = create_sscape(dev, card);
1139 if (ret < 0)
1140 return ret;
1141
1142 ret = snd_card_register(card);
1143 if (ret < 0) {
1144 snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
1145 return ret;
1146 }
1147 dev_set_drvdata(pdev, card);
1148 return 0;
1149}
1150
1151#define DEV_NAME "sscape"
1152
1153static struct isa_driver snd_sscape_driver = {
1154 .match = snd_sscape_match,
1155 .probe = snd_sscape_probe,
1156 /* FIXME: suspend/resume */
1157 .driver = {
1158 .name = DEV_NAME
1159 },
1160};
1161
1162#ifdef CONFIG_PNP
1163static inline int get_next_autoindex(int i)
1164{
1165 while (i < SNDRV_CARDS && port[i] != SNDRV_AUTO_PORT)
1166 ++i;
1167 return i;
1168}
1169
1170
1171static int sscape_pnp_detect(struct pnp_card_link *pcard,
1172 const struct pnp_card_device_id *pid)
1173{
1174 static int idx = 0;
1175 struct pnp_dev *dev;
1176 struct snd_card *card;
1177 struct soundscape *sscape;
1178 int ret;
1179
1180 /*
1181 * Allow this function to fail *quietly* if all the ISA PnP
1182 * devices were configured using module parameters instead.
1183 */
1184 idx = get_next_autoindex(idx);
1185 if (idx >= SNDRV_CARDS)
1186 return -ENOSPC;
1187
1188 /*
1189 * Check that we still have room for another sound card ...
1190 */
1191 dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL);
1192 if (!dev)
1193 return -ENODEV;
1194
1195 if (!pnp_is_active(dev)) {
1196 if (pnp_activate_dev(dev) < 0) {
1197 snd_printk(KERN_INFO "sscape: device is inactive\n");
1198 return -EBUSY;
1199 }
1200 }
1201
1202 /*
1203 * Create a new ALSA sound card entry, in anticipation
1204 * of detecting our hardware ...
1205 */
1206 ret = snd_devm_card_new(&pcard->card->dev,
1207 index[idx], id[idx], THIS_MODULE,
1208 sizeof(struct soundscape), &card);
1209 if (ret < 0)
1210 return ret;
1211
1212 sscape = get_card_soundscape(card);
1213
1214 /*
1215 * Identify card model ...
1216 */
1217 if (!strncmp("ENS4081", pid->id, 7))
1218 sscape->type = SSCAPE_VIVO;
1219 else
1220 sscape->type = SSCAPE_PNP;
1221
1222 /*
1223 * Read the correct parameters off the ISA PnP bus ...
1224 */
1225 port[idx] = pnp_port_start(dev, 0);
1226 irq[idx] = pnp_irq(dev, 0);
1227 mpu_irq[idx] = pnp_irq(dev, 1);
1228 dma[idx] = pnp_dma(dev, 0) & 0x03;
1229 if (sscape->type == SSCAPE_PNP) {
1230 dma2[idx] = dma[idx];
1231 wss_port[idx] = CODEC_IO(port[idx]);
1232 } else {
1233 wss_port[idx] = pnp_port_start(dev, 1);
1234 dma2[idx] = pnp_dma(dev, 1);
1235 }
1236
1237 ret = create_sscape(idx, card);
1238 if (ret < 0)
1239 return ret;
1240
1241 ret = snd_card_register(card);
1242 if (ret < 0) {
1243 snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
1244 return ret;
1245 }
1246
1247 pnp_set_card_drvdata(pcard, card);
1248 ++idx;
1249 return 0;
1250}
1251
1252static struct pnp_card_driver sscape_pnpc_driver = {
1253 .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
1254 .name = "sscape",
1255 .id_table = sscape_pnpids,
1256 .probe = sscape_pnp_detect,
1257};
1258
1259#endif /* CONFIG_PNP */
1260
1261static int __init sscape_init(void)
1262{
1263 int err;
1264
1265 err = isa_register_driver(&snd_sscape_driver, SNDRV_CARDS);
1266#ifdef CONFIG_PNP
1267 if (!err)
1268 isa_registered = 1;
1269
1270 err = pnp_register_card_driver(&sscape_pnpc_driver);
1271 if (!err)
1272 pnp_registered = 1;
1273
1274 if (isa_registered)
1275 err = 0;
1276#endif
1277 return err;
1278}
1279
1280static void __exit sscape_exit(void)
1281{
1282#ifdef CONFIG_PNP
1283 if (pnp_registered)
1284 pnp_unregister_card_driver(&sscape_pnpc_driver);
1285 if (isa_registered)
1286#endif
1287 isa_unregister_driver(&snd_sscape_driver);
1288}
1289
1290module_init(sscape_init);
1291module_exit(sscape_exit);