Linux Audio

Check our new training course

Loading...
v5.9
  1// SPDX-License-Identifier: GPL-2.0
  2/* Copyright 2011-2014 Autronica Fire and Security AS
  3 *
  4 * Author(s):
  5 *	2011-2014 Arvid Brodin, arvid.brodin@alten.se
  6 *
  7 * Frame handler other utility functions for HSR and PRP.
  8 */
  9
 10#include "hsr_slave.h"
 11#include <linux/etherdevice.h>
 12#include <linux/if_arp.h>
 13#include <linux/if_vlan.h>
 14#include "hsr_main.h"
 15#include "hsr_device.h"
 16#include "hsr_forward.h"
 17#include "hsr_framereg.h"
 18
 19bool hsr_invalid_dan_ingress_frame(__be16 protocol)
 20{
 21	return (protocol != htons(ETH_P_PRP) && protocol != htons(ETH_P_HSR));
 22}
 23
 24static rx_handler_result_t hsr_handle_frame(struct sk_buff **pskb)
 25{
 26	struct sk_buff *skb = *pskb;
 27	struct hsr_port *port;
 28	struct hsr_priv *hsr;
 29	__be16 protocol;
 30
 31	/* Packets from dev_loopback_xmit() do not have L2 header, bail out */
 32	if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
 33		return RX_HANDLER_PASS;
 34
 35	if (!skb_mac_header_was_set(skb)) {
 36		WARN_ONCE(1, "%s: skb invalid", __func__);
 37		return RX_HANDLER_PASS;
 38	}
 39
 40	port = hsr_port_get_rcu(skb->dev);
 41	if (!port)
 42		goto finish_pass;
 43	hsr = port->hsr;
 44
 45	if (hsr_addr_is_self(port->hsr, eth_hdr(skb)->h_source)) {
 46		/* Directly kill frames sent by ourselves */
 47		kfree_skb(skb);
 48		goto finish_consume;
 49	}
 50
 51	/* For HSR, only tagged frames are expected, but for PRP
 52	 * there could be non tagged frames as well from Single
 53	 * attached nodes (SANs).
 54	 */
 55	protocol = eth_hdr(skb)->h_proto;
 56	if (hsr->proto_ops->invalid_dan_ingress_frame &&
 
 
 57	    hsr->proto_ops->invalid_dan_ingress_frame(protocol))
 58		goto finish_pass;
 59
 60	skb_push(skb, ETH_HLEN);
 61
 62	if (skb_mac_header(skb) != skb->data) {
 63		WARN_ONCE(1, "%s:%d: Malformed frame at source port %s)\n",
 64			  __func__, __LINE__, port->dev->name);
 65		goto finish_consume;
 66	}
 67
 68	hsr_forward_skb(skb, port);
 69
 70finish_consume:
 71	return RX_HANDLER_CONSUMED;
 72
 73finish_pass:
 74	return RX_HANDLER_PASS;
 75}
 76
 77bool hsr_port_exists(const struct net_device *dev)
 78{
 79	return rcu_access_pointer(dev->rx_handler) == hsr_handle_frame;
 80}
 81
 82static int hsr_check_dev_ok(struct net_device *dev,
 83			    struct netlink_ext_ack *extack)
 84{
 85	/* Don't allow HSR on non-ethernet like devices */
 86	if ((dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
 87	    dev->addr_len != ETH_ALEN) {
 88		NL_SET_ERR_MSG_MOD(extack, "Cannot use loopback or non-ethernet device as HSR slave.");
 89		return -EINVAL;
 90	}
 91
 92	/* Don't allow enslaving hsr devices */
 93	if (is_hsr_master(dev)) {
 94		NL_SET_ERR_MSG_MOD(extack,
 95				   "Cannot create trees of HSR devices.");
 96		return -EINVAL;
 97	}
 98
 99	if (hsr_port_exists(dev)) {
100		NL_SET_ERR_MSG_MOD(extack,
101				   "This device is already a HSR slave.");
102		return -EINVAL;
103	}
104
105	if (is_vlan_dev(dev)) {
106		NL_SET_ERR_MSG_MOD(extack, "HSR on top of VLAN is not yet supported in this driver.");
107		return -EINVAL;
108	}
109
110	if (dev->priv_flags & IFF_DONT_BRIDGE) {
111		NL_SET_ERR_MSG_MOD(extack,
112				   "This device does not support bridging.");
113		return -EOPNOTSUPP;
114	}
115
116	/* HSR over bonded devices has not been tested, but I'm not sure it
117	 * won't work...
118	 */
119
120	return 0;
121}
122
123/* Setup device to be added to the HSR bridge. */
124static int hsr_portdev_setup(struct hsr_priv *hsr, struct net_device *dev,
125			     struct hsr_port *port,
126			     struct netlink_ext_ack *extack)
127
128{
129	struct net_device *hsr_dev;
130	struct hsr_port *master;
131	int res;
132
133	res = dev_set_promiscuity(dev, 1);
134	if (res)
135		return res;
136
137	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
138	hsr_dev = master->dev;
139
140	res = netdev_upper_dev_link(dev, hsr_dev, extack);
141	if (res)
142		goto fail_upper_dev_link;
143
144	res = netdev_rx_handler_register(dev, hsr_handle_frame, port);
145	if (res)
146		goto fail_rx_handler;
147	dev_disable_lro(dev);
148
149	return 0;
150
151fail_rx_handler:
152	netdev_upper_dev_unlink(dev, hsr_dev);
153fail_upper_dev_link:
154	dev_set_promiscuity(dev, -1);
155	return res;
156}
157
158int hsr_add_port(struct hsr_priv *hsr, struct net_device *dev,
159		 enum hsr_port_type type, struct netlink_ext_ack *extack)
160{
161	struct hsr_port *port, *master;
162	int res;
163
164	if (type != HSR_PT_MASTER) {
165		res = hsr_check_dev_ok(dev, extack);
166		if (res)
167			return res;
168	}
169
170	port = hsr_port_get_hsr(hsr, type);
171	if (port)
172		return -EBUSY;	/* This port already exists */
173
174	port = kzalloc(sizeof(*port), GFP_KERNEL);
175	if (!port)
176		return -ENOMEM;
177
178	port->hsr = hsr;
179	port->dev = dev;
180	port->type = type;
181
182	if (type != HSR_PT_MASTER) {
183		res = hsr_portdev_setup(hsr, dev, port, extack);
184		if (res)
185			goto fail_dev_setup;
186	}
187
188	list_add_tail_rcu(&port->port_list, &hsr->ports);
189	synchronize_rcu();
190
191	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
192	netdev_update_features(master->dev);
193	dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
194
195	return 0;
196
197fail_dev_setup:
198	kfree(port);
199	return res;
200}
201
202void hsr_del_port(struct hsr_port *port)
203{
204	struct hsr_priv *hsr;
205	struct hsr_port *master;
206
207	hsr = port->hsr;
208	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
209	list_del_rcu(&port->port_list);
210
211	if (port != master) {
212		netdev_update_features(master->dev);
213		dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
214		netdev_rx_handler_unregister(port->dev);
215		dev_set_promiscuity(port->dev, -1);
216		netdev_upper_dev_unlink(port->dev, master->dev);
217	}
218
219	synchronize_rcu();
220
221	kfree(port);
222}
v6.2
  1// SPDX-License-Identifier: GPL-2.0
  2/* Copyright 2011-2014 Autronica Fire and Security AS
  3 *
  4 * Author(s):
  5 *	2011-2014 Arvid Brodin, arvid.brodin@alten.se
  6 *
  7 * Frame handler other utility functions for HSR and PRP.
  8 */
  9
 10#include "hsr_slave.h"
 11#include <linux/etherdevice.h>
 12#include <linux/if_arp.h>
 13#include <linux/if_vlan.h>
 14#include "hsr_main.h"
 15#include "hsr_device.h"
 16#include "hsr_forward.h"
 17#include "hsr_framereg.h"
 18
 19bool hsr_invalid_dan_ingress_frame(__be16 protocol)
 20{
 21	return (protocol != htons(ETH_P_PRP) && protocol != htons(ETH_P_HSR));
 22}
 23
 24static rx_handler_result_t hsr_handle_frame(struct sk_buff **pskb)
 25{
 26	struct sk_buff *skb = *pskb;
 27	struct hsr_port *port;
 28	struct hsr_priv *hsr;
 29	__be16 protocol;
 30
 31	/* Packets from dev_loopback_xmit() do not have L2 header, bail out */
 32	if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
 33		return RX_HANDLER_PASS;
 34
 35	if (!skb_mac_header_was_set(skb)) {
 36		WARN_ONCE(1, "%s: skb invalid", __func__);
 37		return RX_HANDLER_PASS;
 38	}
 39
 40	port = hsr_port_get_rcu(skb->dev);
 41	if (!port)
 42		goto finish_pass;
 43	hsr = port->hsr;
 44
 45	if (hsr_addr_is_self(port->hsr, eth_hdr(skb)->h_source)) {
 46		/* Directly kill frames sent by ourselves */
 47		kfree_skb(skb);
 48		goto finish_consume;
 49	}
 50
 51	/* For HSR, only tagged frames are expected (unless the device offloads
 52	 * HSR tag removal), but for PRP there could be non tagged frames as
 53	 * well from Single attached nodes (SANs).
 54	 */
 55	protocol = eth_hdr(skb)->h_proto;
 56
 57	if (!(port->dev->features & NETIF_F_HW_HSR_TAG_RM) &&
 58	    hsr->proto_ops->invalid_dan_ingress_frame &&
 59	    hsr->proto_ops->invalid_dan_ingress_frame(protocol))
 60		goto finish_pass;
 61
 62	skb_push(skb, ETH_HLEN);
 63	skb_reset_mac_header(skb);
 64	if ((!hsr->prot_version && protocol == htons(ETH_P_PRP)) ||
 65	    protocol == htons(ETH_P_HSR))
 66		skb_set_network_header(skb, ETH_HLEN + HSR_HLEN);
 67	skb_reset_mac_len(skb);
 
 68
 69	hsr_forward_skb(skb, port);
 70
 71finish_consume:
 72	return RX_HANDLER_CONSUMED;
 73
 74finish_pass:
 75	return RX_HANDLER_PASS;
 76}
 77
 78bool hsr_port_exists(const struct net_device *dev)
 79{
 80	return rcu_access_pointer(dev->rx_handler) == hsr_handle_frame;
 81}
 82
 83static int hsr_check_dev_ok(struct net_device *dev,
 84			    struct netlink_ext_ack *extack)
 85{
 86	/* Don't allow HSR on non-ethernet like devices */
 87	if ((dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
 88	    dev->addr_len != ETH_ALEN) {
 89		NL_SET_ERR_MSG_MOD(extack, "Cannot use loopback or non-ethernet device as HSR slave.");
 90		return -EINVAL;
 91	}
 92
 93	/* Don't allow enslaving hsr devices */
 94	if (is_hsr_master(dev)) {
 95		NL_SET_ERR_MSG_MOD(extack,
 96				   "Cannot create trees of HSR devices.");
 97		return -EINVAL;
 98	}
 99
100	if (hsr_port_exists(dev)) {
101		NL_SET_ERR_MSG_MOD(extack,
102				   "This device is already a HSR slave.");
103		return -EINVAL;
104	}
105
106	if (is_vlan_dev(dev)) {
107		NL_SET_ERR_MSG_MOD(extack, "HSR on top of VLAN is not yet supported in this driver.");
108		return -EINVAL;
109	}
110
111	if (dev->priv_flags & IFF_DONT_BRIDGE) {
112		NL_SET_ERR_MSG_MOD(extack,
113				   "This device does not support bridging.");
114		return -EOPNOTSUPP;
115	}
116
117	/* HSR over bonded devices has not been tested, but I'm not sure it
118	 * won't work...
119	 */
120
121	return 0;
122}
123
124/* Setup device to be added to the HSR bridge. */
125static int hsr_portdev_setup(struct hsr_priv *hsr, struct net_device *dev,
126			     struct hsr_port *port,
127			     struct netlink_ext_ack *extack)
128
129{
130	struct net_device *hsr_dev;
131	struct hsr_port *master;
132	int res;
133
134	res = dev_set_promiscuity(dev, 1);
135	if (res)
136		return res;
137
138	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
139	hsr_dev = master->dev;
140
141	res = netdev_upper_dev_link(dev, hsr_dev, extack);
142	if (res)
143		goto fail_upper_dev_link;
144
145	res = netdev_rx_handler_register(dev, hsr_handle_frame, port);
146	if (res)
147		goto fail_rx_handler;
148	dev_disable_lro(dev);
149
150	return 0;
151
152fail_rx_handler:
153	netdev_upper_dev_unlink(dev, hsr_dev);
154fail_upper_dev_link:
155	dev_set_promiscuity(dev, -1);
156	return res;
157}
158
159int hsr_add_port(struct hsr_priv *hsr, struct net_device *dev,
160		 enum hsr_port_type type, struct netlink_ext_ack *extack)
161{
162	struct hsr_port *port, *master;
163	int res;
164
165	if (type != HSR_PT_MASTER) {
166		res = hsr_check_dev_ok(dev, extack);
167		if (res)
168			return res;
169	}
170
171	port = hsr_port_get_hsr(hsr, type);
172	if (port)
173		return -EBUSY;	/* This port already exists */
174
175	port = kzalloc(sizeof(*port), GFP_KERNEL);
176	if (!port)
177		return -ENOMEM;
178
179	port->hsr = hsr;
180	port->dev = dev;
181	port->type = type;
182
183	if (type != HSR_PT_MASTER) {
184		res = hsr_portdev_setup(hsr, dev, port, extack);
185		if (res)
186			goto fail_dev_setup;
187	}
188
189	list_add_tail_rcu(&port->port_list, &hsr->ports);
190	synchronize_rcu();
191
192	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
193	netdev_update_features(master->dev);
194	dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
195
196	return 0;
197
198fail_dev_setup:
199	kfree(port);
200	return res;
201}
202
203void hsr_del_port(struct hsr_port *port)
204{
205	struct hsr_priv *hsr;
206	struct hsr_port *master;
207
208	hsr = port->hsr;
209	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
210	list_del_rcu(&port->port_list);
211
212	if (port != master) {
213		netdev_update_features(master->dev);
214		dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
215		netdev_rx_handler_unregister(port->dev);
216		dev_set_promiscuity(port->dev, -1);
217		netdev_upper_dev_unlink(port->dev, master->dev);
218	}
219
220	synchronize_rcu();
221
222	kfree(port);
223}