Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * DMA driver for Xilinx Video DMA Engine
4 *
5 * Copyright (C) 2010-2014 Xilinx, Inc. All rights reserved.
6 *
7 * Based on the Freescale DMA driver.
8 *
9 * Description:
10 * The AXI Video Direct Memory Access (AXI VDMA) core is a soft Xilinx IP
11 * core that provides high-bandwidth direct memory access between memory
12 * and AXI4-Stream type video target peripherals. The core provides efficient
13 * two dimensional DMA operations with independent asynchronous read (S2MM)
14 * and write (MM2S) channel operation. It can be configured to have either
15 * one channel or two channels. If configured as two channels, one is to
16 * transmit to the video device (MM2S) and another is to receive from the
17 * video device (S2MM). Initialization, status, interrupt and management
18 * registers are accessed through an AXI4-Lite slave interface.
19 *
20 * The AXI Direct Memory Access (AXI DMA) core is a soft Xilinx IP core that
21 * provides high-bandwidth one dimensional direct memory access between memory
22 * and AXI4-Stream target peripherals. It supports one receive and one
23 * transmit channel, both of them optional at synthesis time.
24 *
25 * The AXI CDMA, is a soft IP, which provides high-bandwidth Direct Memory
26 * Access (DMA) between a memory-mapped source address and a memory-mapped
27 * destination address.
28 *
29 * The AXI Multichannel Direct Memory Access (AXI MCDMA) core is a soft
30 * Xilinx IP that provides high-bandwidth direct memory access between
31 * memory and AXI4-Stream target peripherals. It provides scatter gather
32 * (SG) interface with multiple channels independent configuration support.
33 *
34 */
35
36#include <linux/bitops.h>
37#include <linux/dmapool.h>
38#include <linux/dma/xilinx_dma.h>
39#include <linux/init.h>
40#include <linux/interrupt.h>
41#include <linux/io.h>
42#include <linux/iopoll.h>
43#include <linux/module.h>
44#include <linux/of_address.h>
45#include <linux/of_dma.h>
46#include <linux/of_platform.h>
47#include <linux/of_irq.h>
48#include <linux/slab.h>
49#include <linux/clk.h>
50#include <linux/io-64-nonatomic-lo-hi.h>
51
52#include "../dmaengine.h"
53
54/* Register/Descriptor Offsets */
55#define XILINX_DMA_MM2S_CTRL_OFFSET 0x0000
56#define XILINX_DMA_S2MM_CTRL_OFFSET 0x0030
57#define XILINX_VDMA_MM2S_DESC_OFFSET 0x0050
58#define XILINX_VDMA_S2MM_DESC_OFFSET 0x00a0
59
60/* Control Registers */
61#define XILINX_DMA_REG_DMACR 0x0000
62#define XILINX_DMA_DMACR_DELAY_MAX 0xff
63#define XILINX_DMA_DMACR_DELAY_SHIFT 24
64#define XILINX_DMA_DMACR_FRAME_COUNT_MAX 0xff
65#define XILINX_DMA_DMACR_FRAME_COUNT_SHIFT 16
66#define XILINX_DMA_DMACR_ERR_IRQ BIT(14)
67#define XILINX_DMA_DMACR_DLY_CNT_IRQ BIT(13)
68#define XILINX_DMA_DMACR_FRM_CNT_IRQ BIT(12)
69#define XILINX_DMA_DMACR_MASTER_SHIFT 8
70#define XILINX_DMA_DMACR_FSYNCSRC_SHIFT 5
71#define XILINX_DMA_DMACR_FRAMECNT_EN BIT(4)
72#define XILINX_DMA_DMACR_GENLOCK_EN BIT(3)
73#define XILINX_DMA_DMACR_RESET BIT(2)
74#define XILINX_DMA_DMACR_CIRC_EN BIT(1)
75#define XILINX_DMA_DMACR_RUNSTOP BIT(0)
76#define XILINX_DMA_DMACR_FSYNCSRC_MASK GENMASK(6, 5)
77#define XILINX_DMA_DMACR_DELAY_MASK GENMASK(31, 24)
78#define XILINX_DMA_DMACR_FRAME_COUNT_MASK GENMASK(23, 16)
79#define XILINX_DMA_DMACR_MASTER_MASK GENMASK(11, 8)
80
81#define XILINX_DMA_REG_DMASR 0x0004
82#define XILINX_DMA_DMASR_EOL_LATE_ERR BIT(15)
83#define XILINX_DMA_DMASR_ERR_IRQ BIT(14)
84#define XILINX_DMA_DMASR_DLY_CNT_IRQ BIT(13)
85#define XILINX_DMA_DMASR_FRM_CNT_IRQ BIT(12)
86#define XILINX_DMA_DMASR_SOF_LATE_ERR BIT(11)
87#define XILINX_DMA_DMASR_SG_DEC_ERR BIT(10)
88#define XILINX_DMA_DMASR_SG_SLV_ERR BIT(9)
89#define XILINX_DMA_DMASR_EOF_EARLY_ERR BIT(8)
90#define XILINX_DMA_DMASR_SOF_EARLY_ERR BIT(7)
91#define XILINX_DMA_DMASR_DMA_DEC_ERR BIT(6)
92#define XILINX_DMA_DMASR_DMA_SLAVE_ERR BIT(5)
93#define XILINX_DMA_DMASR_DMA_INT_ERR BIT(4)
94#define XILINX_DMA_DMASR_SG_MASK BIT(3)
95#define XILINX_DMA_DMASR_IDLE BIT(1)
96#define XILINX_DMA_DMASR_HALTED BIT(0)
97#define XILINX_DMA_DMASR_DELAY_MASK GENMASK(31, 24)
98#define XILINX_DMA_DMASR_FRAME_COUNT_MASK GENMASK(23, 16)
99
100#define XILINX_DMA_REG_CURDESC 0x0008
101#define XILINX_DMA_REG_TAILDESC 0x0010
102#define XILINX_DMA_REG_REG_INDEX 0x0014
103#define XILINX_DMA_REG_FRMSTORE 0x0018
104#define XILINX_DMA_REG_THRESHOLD 0x001c
105#define XILINX_DMA_REG_FRMPTR_STS 0x0024
106#define XILINX_DMA_REG_PARK_PTR 0x0028
107#define XILINX_DMA_PARK_PTR_WR_REF_SHIFT 8
108#define XILINX_DMA_PARK_PTR_WR_REF_MASK GENMASK(12, 8)
109#define XILINX_DMA_PARK_PTR_RD_REF_SHIFT 0
110#define XILINX_DMA_PARK_PTR_RD_REF_MASK GENMASK(4, 0)
111#define XILINX_DMA_REG_VDMA_VERSION 0x002c
112
113/* Register Direct Mode Registers */
114#define XILINX_DMA_REG_VSIZE 0x0000
115#define XILINX_DMA_REG_HSIZE 0x0004
116
117#define XILINX_DMA_REG_FRMDLY_STRIDE 0x0008
118#define XILINX_DMA_FRMDLY_STRIDE_FRMDLY_SHIFT 24
119#define XILINX_DMA_FRMDLY_STRIDE_STRIDE_SHIFT 0
120
121#define XILINX_VDMA_REG_START_ADDRESS(n) (0x000c + 4 * (n))
122#define XILINX_VDMA_REG_START_ADDRESS_64(n) (0x000c + 8 * (n))
123
124#define XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP 0x00ec
125#define XILINX_VDMA_ENABLE_VERTICAL_FLIP BIT(0)
126
127/* HW specific definitions */
128#define XILINX_MCDMA_MAX_CHANS_PER_DEVICE 0x20
129#define XILINX_DMA_MAX_CHANS_PER_DEVICE 0x2
130#define XILINX_CDMA_MAX_CHANS_PER_DEVICE 0x1
131
132#define XILINX_DMA_DMAXR_ALL_IRQ_MASK \
133 (XILINX_DMA_DMASR_FRM_CNT_IRQ | \
134 XILINX_DMA_DMASR_DLY_CNT_IRQ | \
135 XILINX_DMA_DMASR_ERR_IRQ)
136
137#define XILINX_DMA_DMASR_ALL_ERR_MASK \
138 (XILINX_DMA_DMASR_EOL_LATE_ERR | \
139 XILINX_DMA_DMASR_SOF_LATE_ERR | \
140 XILINX_DMA_DMASR_SG_DEC_ERR | \
141 XILINX_DMA_DMASR_SG_SLV_ERR | \
142 XILINX_DMA_DMASR_EOF_EARLY_ERR | \
143 XILINX_DMA_DMASR_SOF_EARLY_ERR | \
144 XILINX_DMA_DMASR_DMA_DEC_ERR | \
145 XILINX_DMA_DMASR_DMA_SLAVE_ERR | \
146 XILINX_DMA_DMASR_DMA_INT_ERR)
147
148/*
149 * Recoverable errors are DMA Internal error, SOF Early, EOF Early
150 * and SOF Late. They are only recoverable when C_FLUSH_ON_FSYNC
151 * is enabled in the h/w system.
152 */
153#define XILINX_DMA_DMASR_ERR_RECOVER_MASK \
154 (XILINX_DMA_DMASR_SOF_LATE_ERR | \
155 XILINX_DMA_DMASR_EOF_EARLY_ERR | \
156 XILINX_DMA_DMASR_SOF_EARLY_ERR | \
157 XILINX_DMA_DMASR_DMA_INT_ERR)
158
159/* Axi VDMA Flush on Fsync bits */
160#define XILINX_DMA_FLUSH_S2MM 3
161#define XILINX_DMA_FLUSH_MM2S 2
162#define XILINX_DMA_FLUSH_BOTH 1
163
164/* Delay loop counter to prevent hardware failure */
165#define XILINX_DMA_LOOP_COUNT 1000000
166
167/* AXI DMA Specific Registers/Offsets */
168#define XILINX_DMA_REG_SRCDSTADDR 0x18
169#define XILINX_DMA_REG_BTT 0x28
170
171/* AXI DMA Specific Masks/Bit fields */
172#define XILINX_DMA_MAX_TRANS_LEN_MIN 8
173#define XILINX_DMA_MAX_TRANS_LEN_MAX 23
174#define XILINX_DMA_V2_MAX_TRANS_LEN_MAX 26
175#define XILINX_DMA_CR_COALESCE_MAX GENMASK(23, 16)
176#define XILINX_DMA_CR_CYCLIC_BD_EN_MASK BIT(4)
177#define XILINX_DMA_CR_COALESCE_SHIFT 16
178#define XILINX_DMA_BD_SOP BIT(27)
179#define XILINX_DMA_BD_EOP BIT(26)
180#define XILINX_DMA_COALESCE_MAX 255
181#define XILINX_DMA_NUM_DESCS 255
182#define XILINX_DMA_NUM_APP_WORDS 5
183
184/* AXI CDMA Specific Registers/Offsets */
185#define XILINX_CDMA_REG_SRCADDR 0x18
186#define XILINX_CDMA_REG_DSTADDR 0x20
187
188/* AXI CDMA Specific Masks */
189#define XILINX_CDMA_CR_SGMODE BIT(3)
190
191#define xilinx_prep_dma_addr_t(addr) \
192 ((dma_addr_t)((u64)addr##_##msb << 32 | (addr)))
193
194/* AXI MCDMA Specific Registers/Offsets */
195#define XILINX_MCDMA_MM2S_CTRL_OFFSET 0x0000
196#define XILINX_MCDMA_S2MM_CTRL_OFFSET 0x0500
197#define XILINX_MCDMA_CHEN_OFFSET 0x0008
198#define XILINX_MCDMA_CH_ERR_OFFSET 0x0010
199#define XILINX_MCDMA_RXINT_SER_OFFSET 0x0020
200#define XILINX_MCDMA_TXINT_SER_OFFSET 0x0028
201#define XILINX_MCDMA_CHAN_CR_OFFSET(x) (0x40 + (x) * 0x40)
202#define XILINX_MCDMA_CHAN_SR_OFFSET(x) (0x44 + (x) * 0x40)
203#define XILINX_MCDMA_CHAN_CDESC_OFFSET(x) (0x48 + (x) * 0x40)
204#define XILINX_MCDMA_CHAN_TDESC_OFFSET(x) (0x50 + (x) * 0x40)
205
206/* AXI MCDMA Specific Masks/Shifts */
207#define XILINX_MCDMA_COALESCE_SHIFT 16
208#define XILINX_MCDMA_COALESCE_MAX 24
209#define XILINX_MCDMA_IRQ_ALL_MASK GENMASK(7, 5)
210#define XILINX_MCDMA_COALESCE_MASK GENMASK(23, 16)
211#define XILINX_MCDMA_CR_RUNSTOP_MASK BIT(0)
212#define XILINX_MCDMA_IRQ_IOC_MASK BIT(5)
213#define XILINX_MCDMA_IRQ_DELAY_MASK BIT(6)
214#define XILINX_MCDMA_IRQ_ERR_MASK BIT(7)
215#define XILINX_MCDMA_BD_EOP BIT(30)
216#define XILINX_MCDMA_BD_SOP BIT(31)
217
218/**
219 * struct xilinx_vdma_desc_hw - Hardware Descriptor
220 * @next_desc: Next Descriptor Pointer @0x00
221 * @pad1: Reserved @0x04
222 * @buf_addr: Buffer address @0x08
223 * @buf_addr_msb: MSB of Buffer address @0x0C
224 * @vsize: Vertical Size @0x10
225 * @hsize: Horizontal Size @0x14
226 * @stride: Number of bytes between the first
227 * pixels of each horizontal line @0x18
228 */
229struct xilinx_vdma_desc_hw {
230 u32 next_desc;
231 u32 pad1;
232 u32 buf_addr;
233 u32 buf_addr_msb;
234 u32 vsize;
235 u32 hsize;
236 u32 stride;
237} __aligned(64);
238
239/**
240 * struct xilinx_axidma_desc_hw - Hardware Descriptor for AXI DMA
241 * @next_desc: Next Descriptor Pointer @0x00
242 * @next_desc_msb: MSB of Next Descriptor Pointer @0x04
243 * @buf_addr: Buffer address @0x08
244 * @buf_addr_msb: MSB of Buffer address @0x0C
245 * @reserved1: Reserved @0x10
246 * @reserved2: Reserved @0x14
247 * @control: Control field @0x18
248 * @status: Status field @0x1C
249 * @app: APP Fields @0x20 - 0x30
250 */
251struct xilinx_axidma_desc_hw {
252 u32 next_desc;
253 u32 next_desc_msb;
254 u32 buf_addr;
255 u32 buf_addr_msb;
256 u32 reserved1;
257 u32 reserved2;
258 u32 control;
259 u32 status;
260 u32 app[XILINX_DMA_NUM_APP_WORDS];
261} __aligned(64);
262
263/**
264 * struct xilinx_aximcdma_desc_hw - Hardware Descriptor for AXI MCDMA
265 * @next_desc: Next Descriptor Pointer @0x00
266 * @next_desc_msb: MSB of Next Descriptor Pointer @0x04
267 * @buf_addr: Buffer address @0x08
268 * @buf_addr_msb: MSB of Buffer address @0x0C
269 * @rsvd: Reserved field @0x10
270 * @control: Control Information field @0x14
271 * @status: Status field @0x18
272 * @sideband_status: Status of sideband signals @0x1C
273 * @app: APP Fields @0x20 - 0x30
274 */
275struct xilinx_aximcdma_desc_hw {
276 u32 next_desc;
277 u32 next_desc_msb;
278 u32 buf_addr;
279 u32 buf_addr_msb;
280 u32 rsvd;
281 u32 control;
282 u32 status;
283 u32 sideband_status;
284 u32 app[XILINX_DMA_NUM_APP_WORDS];
285} __aligned(64);
286
287/**
288 * struct xilinx_cdma_desc_hw - Hardware Descriptor
289 * @next_desc: Next Descriptor Pointer @0x00
290 * @next_desc_msb: Next Descriptor Pointer MSB @0x04
291 * @src_addr: Source address @0x08
292 * @src_addr_msb: Source address MSB @0x0C
293 * @dest_addr: Destination address @0x10
294 * @dest_addr_msb: Destination address MSB @0x14
295 * @control: Control field @0x18
296 * @status: Status field @0x1C
297 */
298struct xilinx_cdma_desc_hw {
299 u32 next_desc;
300 u32 next_desc_msb;
301 u32 src_addr;
302 u32 src_addr_msb;
303 u32 dest_addr;
304 u32 dest_addr_msb;
305 u32 control;
306 u32 status;
307} __aligned(64);
308
309/**
310 * struct xilinx_vdma_tx_segment - Descriptor segment
311 * @hw: Hardware descriptor
312 * @node: Node in the descriptor segments list
313 * @phys: Physical address of segment
314 */
315struct xilinx_vdma_tx_segment {
316 struct xilinx_vdma_desc_hw hw;
317 struct list_head node;
318 dma_addr_t phys;
319} __aligned(64);
320
321/**
322 * struct xilinx_axidma_tx_segment - Descriptor segment
323 * @hw: Hardware descriptor
324 * @node: Node in the descriptor segments list
325 * @phys: Physical address of segment
326 */
327struct xilinx_axidma_tx_segment {
328 struct xilinx_axidma_desc_hw hw;
329 struct list_head node;
330 dma_addr_t phys;
331} __aligned(64);
332
333/**
334 * struct xilinx_aximcdma_tx_segment - Descriptor segment
335 * @hw: Hardware descriptor
336 * @node: Node in the descriptor segments list
337 * @phys: Physical address of segment
338 */
339struct xilinx_aximcdma_tx_segment {
340 struct xilinx_aximcdma_desc_hw hw;
341 struct list_head node;
342 dma_addr_t phys;
343} __aligned(64);
344
345/**
346 * struct xilinx_cdma_tx_segment - Descriptor segment
347 * @hw: Hardware descriptor
348 * @node: Node in the descriptor segments list
349 * @phys: Physical address of segment
350 */
351struct xilinx_cdma_tx_segment {
352 struct xilinx_cdma_desc_hw hw;
353 struct list_head node;
354 dma_addr_t phys;
355} __aligned(64);
356
357/**
358 * struct xilinx_dma_tx_descriptor - Per Transaction structure
359 * @async_tx: Async transaction descriptor
360 * @segments: TX segments list
361 * @node: Node in the channel descriptors list
362 * @cyclic: Check for cyclic transfers.
363 * @err: Whether the descriptor has an error.
364 * @residue: Residue of the completed descriptor
365 */
366struct xilinx_dma_tx_descriptor {
367 struct dma_async_tx_descriptor async_tx;
368 struct list_head segments;
369 struct list_head node;
370 bool cyclic;
371 bool err;
372 u32 residue;
373};
374
375/**
376 * struct xilinx_dma_chan - Driver specific DMA channel structure
377 * @xdev: Driver specific device structure
378 * @ctrl_offset: Control registers offset
379 * @desc_offset: TX descriptor registers offset
380 * @lock: Descriptor operation lock
381 * @pending_list: Descriptors waiting
382 * @active_list: Descriptors ready to submit
383 * @done_list: Complete descriptors
384 * @free_seg_list: Free descriptors
385 * @common: DMA common channel
386 * @desc_pool: Descriptors pool
387 * @dev: The dma device
388 * @irq: Channel IRQ
389 * @id: Channel ID
390 * @direction: Transfer direction
391 * @num_frms: Number of frames
392 * @has_sg: Support scatter transfers
393 * @cyclic: Check for cyclic transfers.
394 * @genlock: Support genlock mode
395 * @err: Channel has errors
396 * @idle: Check for channel idle
397 * @tasklet: Cleanup work after irq
398 * @config: Device configuration info
399 * @flush_on_fsync: Flush on Frame sync
400 * @desc_pendingcount: Descriptor pending count
401 * @ext_addr: Indicates 64 bit addressing is supported by dma channel
402 * @desc_submitcount: Descriptor h/w submitted count
403 * @seg_v: Statically allocated segments base
404 * @seg_mv: Statically allocated segments base for MCDMA
405 * @seg_p: Physical allocated segments base
406 * @cyclic_seg_v: Statically allocated segment base for cyclic transfers
407 * @cyclic_seg_p: Physical allocated segments base for cyclic dma
408 * @start_transfer: Differentiate b/w DMA IP's transfer
409 * @stop_transfer: Differentiate b/w DMA IP's quiesce
410 * @tdest: TDEST value for mcdma
411 * @has_vflip: S2MM vertical flip
412 */
413struct xilinx_dma_chan {
414 struct xilinx_dma_device *xdev;
415 u32 ctrl_offset;
416 u32 desc_offset;
417 spinlock_t lock;
418 struct list_head pending_list;
419 struct list_head active_list;
420 struct list_head done_list;
421 struct list_head free_seg_list;
422 struct dma_chan common;
423 struct dma_pool *desc_pool;
424 struct device *dev;
425 int irq;
426 int id;
427 enum dma_transfer_direction direction;
428 int num_frms;
429 bool has_sg;
430 bool cyclic;
431 bool genlock;
432 bool err;
433 bool idle;
434 struct tasklet_struct tasklet;
435 struct xilinx_vdma_config config;
436 bool flush_on_fsync;
437 u32 desc_pendingcount;
438 bool ext_addr;
439 u32 desc_submitcount;
440 struct xilinx_axidma_tx_segment *seg_v;
441 struct xilinx_aximcdma_tx_segment *seg_mv;
442 dma_addr_t seg_p;
443 struct xilinx_axidma_tx_segment *cyclic_seg_v;
444 dma_addr_t cyclic_seg_p;
445 void (*start_transfer)(struct xilinx_dma_chan *chan);
446 int (*stop_transfer)(struct xilinx_dma_chan *chan);
447 u16 tdest;
448 bool has_vflip;
449};
450
451/**
452 * enum xdma_ip_type - DMA IP type.
453 *
454 * @XDMA_TYPE_AXIDMA: Axi dma ip.
455 * @XDMA_TYPE_CDMA: Axi cdma ip.
456 * @XDMA_TYPE_VDMA: Axi vdma ip.
457 * @XDMA_TYPE_AXIMCDMA: Axi MCDMA ip.
458 *
459 */
460enum xdma_ip_type {
461 XDMA_TYPE_AXIDMA = 0,
462 XDMA_TYPE_CDMA,
463 XDMA_TYPE_VDMA,
464 XDMA_TYPE_AXIMCDMA
465};
466
467struct xilinx_dma_config {
468 enum xdma_ip_type dmatype;
469 int (*clk_init)(struct platform_device *pdev, struct clk **axi_clk,
470 struct clk **tx_clk, struct clk **txs_clk,
471 struct clk **rx_clk, struct clk **rxs_clk);
472 irqreturn_t (*irq_handler)(int irq, void *data);
473 const int max_channels;
474};
475
476/**
477 * struct xilinx_dma_device - DMA device structure
478 * @regs: I/O mapped base address
479 * @dev: Device Structure
480 * @common: DMA device structure
481 * @chan: Driver specific DMA channel
482 * @flush_on_fsync: Flush on frame sync
483 * @ext_addr: Indicates 64 bit addressing is supported by dma device
484 * @pdev: Platform device structure pointer
485 * @dma_config: DMA config structure
486 * @axi_clk: DMA Axi4-lite interace clock
487 * @tx_clk: DMA mm2s clock
488 * @txs_clk: DMA mm2s stream clock
489 * @rx_clk: DMA s2mm clock
490 * @rxs_clk: DMA s2mm stream clock
491 * @s2mm_chan_id: DMA s2mm channel identifier
492 * @mm2s_chan_id: DMA mm2s channel identifier
493 * @max_buffer_len: Max buffer length
494 */
495struct xilinx_dma_device {
496 void __iomem *regs;
497 struct device *dev;
498 struct dma_device common;
499 struct xilinx_dma_chan *chan[XILINX_MCDMA_MAX_CHANS_PER_DEVICE];
500 u32 flush_on_fsync;
501 bool ext_addr;
502 struct platform_device *pdev;
503 const struct xilinx_dma_config *dma_config;
504 struct clk *axi_clk;
505 struct clk *tx_clk;
506 struct clk *txs_clk;
507 struct clk *rx_clk;
508 struct clk *rxs_clk;
509 u32 s2mm_chan_id;
510 u32 mm2s_chan_id;
511 u32 max_buffer_len;
512};
513
514/* Macros */
515#define to_xilinx_chan(chan) \
516 container_of(chan, struct xilinx_dma_chan, common)
517#define to_dma_tx_descriptor(tx) \
518 container_of(tx, struct xilinx_dma_tx_descriptor, async_tx)
519#define xilinx_dma_poll_timeout(chan, reg, val, cond, delay_us, timeout_us) \
520 readl_poll_timeout(chan->xdev->regs + chan->ctrl_offset + reg, val, \
521 cond, delay_us, timeout_us)
522
523/* IO accessors */
524static inline u32 dma_read(struct xilinx_dma_chan *chan, u32 reg)
525{
526 return ioread32(chan->xdev->regs + reg);
527}
528
529static inline void dma_write(struct xilinx_dma_chan *chan, u32 reg, u32 value)
530{
531 iowrite32(value, chan->xdev->regs + reg);
532}
533
534static inline void vdma_desc_write(struct xilinx_dma_chan *chan, u32 reg,
535 u32 value)
536{
537 dma_write(chan, chan->desc_offset + reg, value);
538}
539
540static inline u32 dma_ctrl_read(struct xilinx_dma_chan *chan, u32 reg)
541{
542 return dma_read(chan, chan->ctrl_offset + reg);
543}
544
545static inline void dma_ctrl_write(struct xilinx_dma_chan *chan, u32 reg,
546 u32 value)
547{
548 dma_write(chan, chan->ctrl_offset + reg, value);
549}
550
551static inline void dma_ctrl_clr(struct xilinx_dma_chan *chan, u32 reg,
552 u32 clr)
553{
554 dma_ctrl_write(chan, reg, dma_ctrl_read(chan, reg) & ~clr);
555}
556
557static inline void dma_ctrl_set(struct xilinx_dma_chan *chan, u32 reg,
558 u32 set)
559{
560 dma_ctrl_write(chan, reg, dma_ctrl_read(chan, reg) | set);
561}
562
563/**
564 * vdma_desc_write_64 - 64-bit descriptor write
565 * @chan: Driver specific VDMA channel
566 * @reg: Register to write
567 * @value_lsb: lower address of the descriptor.
568 * @value_msb: upper address of the descriptor.
569 *
570 * Since vdma driver is trying to write to a register offset which is not a
571 * multiple of 64 bits(ex : 0x5c), we are writing as two separate 32 bits
572 * instead of a single 64 bit register write.
573 */
574static inline void vdma_desc_write_64(struct xilinx_dma_chan *chan, u32 reg,
575 u32 value_lsb, u32 value_msb)
576{
577 /* Write the lsb 32 bits*/
578 writel(value_lsb, chan->xdev->regs + chan->desc_offset + reg);
579
580 /* Write the msb 32 bits */
581 writel(value_msb, chan->xdev->regs + chan->desc_offset + reg + 4);
582}
583
584static inline void dma_writeq(struct xilinx_dma_chan *chan, u32 reg, u64 value)
585{
586 lo_hi_writeq(value, chan->xdev->regs + chan->ctrl_offset + reg);
587}
588
589static inline void xilinx_write(struct xilinx_dma_chan *chan, u32 reg,
590 dma_addr_t addr)
591{
592 if (chan->ext_addr)
593 dma_writeq(chan, reg, addr);
594 else
595 dma_ctrl_write(chan, reg, addr);
596}
597
598static inline void xilinx_axidma_buf(struct xilinx_dma_chan *chan,
599 struct xilinx_axidma_desc_hw *hw,
600 dma_addr_t buf_addr, size_t sg_used,
601 size_t period_len)
602{
603 if (chan->ext_addr) {
604 hw->buf_addr = lower_32_bits(buf_addr + sg_used + period_len);
605 hw->buf_addr_msb = upper_32_bits(buf_addr + sg_used +
606 period_len);
607 } else {
608 hw->buf_addr = buf_addr + sg_used + period_len;
609 }
610}
611
612static inline void xilinx_aximcdma_buf(struct xilinx_dma_chan *chan,
613 struct xilinx_aximcdma_desc_hw *hw,
614 dma_addr_t buf_addr, size_t sg_used)
615{
616 if (chan->ext_addr) {
617 hw->buf_addr = lower_32_bits(buf_addr + sg_used);
618 hw->buf_addr_msb = upper_32_bits(buf_addr + sg_used);
619 } else {
620 hw->buf_addr = buf_addr + sg_used;
621 }
622}
623
624/* -----------------------------------------------------------------------------
625 * Descriptors and segments alloc and free
626 */
627
628/**
629 * xilinx_vdma_alloc_tx_segment - Allocate transaction segment
630 * @chan: Driver specific DMA channel
631 *
632 * Return: The allocated segment on success and NULL on failure.
633 */
634static struct xilinx_vdma_tx_segment *
635xilinx_vdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
636{
637 struct xilinx_vdma_tx_segment *segment;
638 dma_addr_t phys;
639
640 segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
641 if (!segment)
642 return NULL;
643
644 segment->phys = phys;
645
646 return segment;
647}
648
649/**
650 * xilinx_cdma_alloc_tx_segment - Allocate transaction segment
651 * @chan: Driver specific DMA channel
652 *
653 * Return: The allocated segment on success and NULL on failure.
654 */
655static struct xilinx_cdma_tx_segment *
656xilinx_cdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
657{
658 struct xilinx_cdma_tx_segment *segment;
659 dma_addr_t phys;
660
661 segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
662 if (!segment)
663 return NULL;
664
665 segment->phys = phys;
666
667 return segment;
668}
669
670/**
671 * xilinx_axidma_alloc_tx_segment - Allocate transaction segment
672 * @chan: Driver specific DMA channel
673 *
674 * Return: The allocated segment on success and NULL on failure.
675 */
676static struct xilinx_axidma_tx_segment *
677xilinx_axidma_alloc_tx_segment(struct xilinx_dma_chan *chan)
678{
679 struct xilinx_axidma_tx_segment *segment = NULL;
680 unsigned long flags;
681
682 spin_lock_irqsave(&chan->lock, flags);
683 if (!list_empty(&chan->free_seg_list)) {
684 segment = list_first_entry(&chan->free_seg_list,
685 struct xilinx_axidma_tx_segment,
686 node);
687 list_del(&segment->node);
688 }
689 spin_unlock_irqrestore(&chan->lock, flags);
690
691 if (!segment)
692 dev_dbg(chan->dev, "Could not find free tx segment\n");
693
694 return segment;
695}
696
697/**
698 * xilinx_aximcdma_alloc_tx_segment - Allocate transaction segment
699 * @chan: Driver specific DMA channel
700 *
701 * Return: The allocated segment on success and NULL on failure.
702 */
703static struct xilinx_aximcdma_tx_segment *
704xilinx_aximcdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
705{
706 struct xilinx_aximcdma_tx_segment *segment = NULL;
707 unsigned long flags;
708
709 spin_lock_irqsave(&chan->lock, flags);
710 if (!list_empty(&chan->free_seg_list)) {
711 segment = list_first_entry(&chan->free_seg_list,
712 struct xilinx_aximcdma_tx_segment,
713 node);
714 list_del(&segment->node);
715 }
716 spin_unlock_irqrestore(&chan->lock, flags);
717
718 return segment;
719}
720
721static void xilinx_dma_clean_hw_desc(struct xilinx_axidma_desc_hw *hw)
722{
723 u32 next_desc = hw->next_desc;
724 u32 next_desc_msb = hw->next_desc_msb;
725
726 memset(hw, 0, sizeof(struct xilinx_axidma_desc_hw));
727
728 hw->next_desc = next_desc;
729 hw->next_desc_msb = next_desc_msb;
730}
731
732static void xilinx_mcdma_clean_hw_desc(struct xilinx_aximcdma_desc_hw *hw)
733{
734 u32 next_desc = hw->next_desc;
735 u32 next_desc_msb = hw->next_desc_msb;
736
737 memset(hw, 0, sizeof(struct xilinx_aximcdma_desc_hw));
738
739 hw->next_desc = next_desc;
740 hw->next_desc_msb = next_desc_msb;
741}
742
743/**
744 * xilinx_dma_free_tx_segment - Free transaction segment
745 * @chan: Driver specific DMA channel
746 * @segment: DMA transaction segment
747 */
748static void xilinx_dma_free_tx_segment(struct xilinx_dma_chan *chan,
749 struct xilinx_axidma_tx_segment *segment)
750{
751 xilinx_dma_clean_hw_desc(&segment->hw);
752
753 list_add_tail(&segment->node, &chan->free_seg_list);
754}
755
756/**
757 * xilinx_mcdma_free_tx_segment - Free transaction segment
758 * @chan: Driver specific DMA channel
759 * @segment: DMA transaction segment
760 */
761static void xilinx_mcdma_free_tx_segment(struct xilinx_dma_chan *chan,
762 struct xilinx_aximcdma_tx_segment *
763 segment)
764{
765 xilinx_mcdma_clean_hw_desc(&segment->hw);
766
767 list_add_tail(&segment->node, &chan->free_seg_list);
768}
769
770/**
771 * xilinx_cdma_free_tx_segment - Free transaction segment
772 * @chan: Driver specific DMA channel
773 * @segment: DMA transaction segment
774 */
775static void xilinx_cdma_free_tx_segment(struct xilinx_dma_chan *chan,
776 struct xilinx_cdma_tx_segment *segment)
777{
778 dma_pool_free(chan->desc_pool, segment, segment->phys);
779}
780
781/**
782 * xilinx_vdma_free_tx_segment - Free transaction segment
783 * @chan: Driver specific DMA channel
784 * @segment: DMA transaction segment
785 */
786static void xilinx_vdma_free_tx_segment(struct xilinx_dma_chan *chan,
787 struct xilinx_vdma_tx_segment *segment)
788{
789 dma_pool_free(chan->desc_pool, segment, segment->phys);
790}
791
792/**
793 * xilinx_dma_tx_descriptor - Allocate transaction descriptor
794 * @chan: Driver specific DMA channel
795 *
796 * Return: The allocated descriptor on success and NULL on failure.
797 */
798static struct xilinx_dma_tx_descriptor *
799xilinx_dma_alloc_tx_descriptor(struct xilinx_dma_chan *chan)
800{
801 struct xilinx_dma_tx_descriptor *desc;
802
803 desc = kzalloc(sizeof(*desc), GFP_KERNEL);
804 if (!desc)
805 return NULL;
806
807 INIT_LIST_HEAD(&desc->segments);
808
809 return desc;
810}
811
812/**
813 * xilinx_dma_free_tx_descriptor - Free transaction descriptor
814 * @chan: Driver specific DMA channel
815 * @desc: DMA transaction descriptor
816 */
817static void
818xilinx_dma_free_tx_descriptor(struct xilinx_dma_chan *chan,
819 struct xilinx_dma_tx_descriptor *desc)
820{
821 struct xilinx_vdma_tx_segment *segment, *next;
822 struct xilinx_cdma_tx_segment *cdma_segment, *cdma_next;
823 struct xilinx_axidma_tx_segment *axidma_segment, *axidma_next;
824 struct xilinx_aximcdma_tx_segment *aximcdma_segment, *aximcdma_next;
825
826 if (!desc)
827 return;
828
829 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
830 list_for_each_entry_safe(segment, next, &desc->segments, node) {
831 list_del(&segment->node);
832 xilinx_vdma_free_tx_segment(chan, segment);
833 }
834 } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
835 list_for_each_entry_safe(cdma_segment, cdma_next,
836 &desc->segments, node) {
837 list_del(&cdma_segment->node);
838 xilinx_cdma_free_tx_segment(chan, cdma_segment);
839 }
840 } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
841 list_for_each_entry_safe(axidma_segment, axidma_next,
842 &desc->segments, node) {
843 list_del(&axidma_segment->node);
844 xilinx_dma_free_tx_segment(chan, axidma_segment);
845 }
846 } else {
847 list_for_each_entry_safe(aximcdma_segment, aximcdma_next,
848 &desc->segments, node) {
849 list_del(&aximcdma_segment->node);
850 xilinx_mcdma_free_tx_segment(chan, aximcdma_segment);
851 }
852 }
853
854 kfree(desc);
855}
856
857/* Required functions */
858
859/**
860 * xilinx_dma_free_desc_list - Free descriptors list
861 * @chan: Driver specific DMA channel
862 * @list: List to parse and delete the descriptor
863 */
864static void xilinx_dma_free_desc_list(struct xilinx_dma_chan *chan,
865 struct list_head *list)
866{
867 struct xilinx_dma_tx_descriptor *desc, *next;
868
869 list_for_each_entry_safe(desc, next, list, node) {
870 list_del(&desc->node);
871 xilinx_dma_free_tx_descriptor(chan, desc);
872 }
873}
874
875/**
876 * xilinx_dma_free_descriptors - Free channel descriptors
877 * @chan: Driver specific DMA channel
878 */
879static void xilinx_dma_free_descriptors(struct xilinx_dma_chan *chan)
880{
881 unsigned long flags;
882
883 spin_lock_irqsave(&chan->lock, flags);
884
885 xilinx_dma_free_desc_list(chan, &chan->pending_list);
886 xilinx_dma_free_desc_list(chan, &chan->done_list);
887 xilinx_dma_free_desc_list(chan, &chan->active_list);
888
889 spin_unlock_irqrestore(&chan->lock, flags);
890}
891
892/**
893 * xilinx_dma_free_chan_resources - Free channel resources
894 * @dchan: DMA channel
895 */
896static void xilinx_dma_free_chan_resources(struct dma_chan *dchan)
897{
898 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
899 unsigned long flags;
900
901 dev_dbg(chan->dev, "Free all channel resources.\n");
902
903 xilinx_dma_free_descriptors(chan);
904
905 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
906 spin_lock_irqsave(&chan->lock, flags);
907 INIT_LIST_HEAD(&chan->free_seg_list);
908 spin_unlock_irqrestore(&chan->lock, flags);
909
910 /* Free memory that is allocated for BD */
911 dma_free_coherent(chan->dev, sizeof(*chan->seg_v) *
912 XILINX_DMA_NUM_DESCS, chan->seg_v,
913 chan->seg_p);
914
915 /* Free Memory that is allocated for cyclic DMA Mode */
916 dma_free_coherent(chan->dev, sizeof(*chan->cyclic_seg_v),
917 chan->cyclic_seg_v, chan->cyclic_seg_p);
918 }
919
920 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
921 spin_lock_irqsave(&chan->lock, flags);
922 INIT_LIST_HEAD(&chan->free_seg_list);
923 spin_unlock_irqrestore(&chan->lock, flags);
924
925 /* Free memory that is allocated for BD */
926 dma_free_coherent(chan->dev, sizeof(*chan->seg_mv) *
927 XILINX_DMA_NUM_DESCS, chan->seg_mv,
928 chan->seg_p);
929 }
930
931 if (chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIDMA &&
932 chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIMCDMA) {
933 dma_pool_destroy(chan->desc_pool);
934 chan->desc_pool = NULL;
935 }
936
937}
938
939/**
940 * xilinx_dma_get_residue - Compute residue for a given descriptor
941 * @chan: Driver specific dma channel
942 * @desc: dma transaction descriptor
943 *
944 * Return: The number of residue bytes for the descriptor.
945 */
946static u32 xilinx_dma_get_residue(struct xilinx_dma_chan *chan,
947 struct xilinx_dma_tx_descriptor *desc)
948{
949 struct xilinx_cdma_tx_segment *cdma_seg;
950 struct xilinx_axidma_tx_segment *axidma_seg;
951 struct xilinx_cdma_desc_hw *cdma_hw;
952 struct xilinx_axidma_desc_hw *axidma_hw;
953 struct list_head *entry;
954 u32 residue = 0;
955
956 list_for_each(entry, &desc->segments) {
957 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
958 cdma_seg = list_entry(entry,
959 struct xilinx_cdma_tx_segment,
960 node);
961 cdma_hw = &cdma_seg->hw;
962 residue += (cdma_hw->control - cdma_hw->status) &
963 chan->xdev->max_buffer_len;
964 } else {
965 axidma_seg = list_entry(entry,
966 struct xilinx_axidma_tx_segment,
967 node);
968 axidma_hw = &axidma_seg->hw;
969 residue += (axidma_hw->control - axidma_hw->status) &
970 chan->xdev->max_buffer_len;
971 }
972 }
973
974 return residue;
975}
976
977/**
978 * xilinx_dma_chan_handle_cyclic - Cyclic dma callback
979 * @chan: Driver specific dma channel
980 * @desc: dma transaction descriptor
981 * @flags: flags for spin lock
982 */
983static void xilinx_dma_chan_handle_cyclic(struct xilinx_dma_chan *chan,
984 struct xilinx_dma_tx_descriptor *desc,
985 unsigned long *flags)
986{
987 dma_async_tx_callback callback;
988 void *callback_param;
989
990 callback = desc->async_tx.callback;
991 callback_param = desc->async_tx.callback_param;
992 if (callback) {
993 spin_unlock_irqrestore(&chan->lock, *flags);
994 callback(callback_param);
995 spin_lock_irqsave(&chan->lock, *flags);
996 }
997}
998
999/**
1000 * xilinx_dma_chan_desc_cleanup - Clean channel descriptors
1001 * @chan: Driver specific DMA channel
1002 */
1003static void xilinx_dma_chan_desc_cleanup(struct xilinx_dma_chan *chan)
1004{
1005 struct xilinx_dma_tx_descriptor *desc, *next;
1006 unsigned long flags;
1007
1008 spin_lock_irqsave(&chan->lock, flags);
1009
1010 list_for_each_entry_safe(desc, next, &chan->done_list, node) {
1011 struct dmaengine_result result;
1012
1013 if (desc->cyclic) {
1014 xilinx_dma_chan_handle_cyclic(chan, desc, &flags);
1015 break;
1016 }
1017
1018 /* Remove from the list of running transactions */
1019 list_del(&desc->node);
1020
1021 if (unlikely(desc->err)) {
1022 if (chan->direction == DMA_DEV_TO_MEM)
1023 result.result = DMA_TRANS_READ_FAILED;
1024 else
1025 result.result = DMA_TRANS_WRITE_FAILED;
1026 } else {
1027 result.result = DMA_TRANS_NOERROR;
1028 }
1029
1030 result.residue = desc->residue;
1031
1032 /* Run the link descriptor callback function */
1033 spin_unlock_irqrestore(&chan->lock, flags);
1034 dmaengine_desc_get_callback_invoke(&desc->async_tx, &result);
1035 spin_lock_irqsave(&chan->lock, flags);
1036
1037 /* Run any dependencies, then free the descriptor */
1038 dma_run_dependencies(&desc->async_tx);
1039 xilinx_dma_free_tx_descriptor(chan, desc);
1040 }
1041
1042 spin_unlock_irqrestore(&chan->lock, flags);
1043}
1044
1045/**
1046 * xilinx_dma_do_tasklet - Schedule completion tasklet
1047 * @data: Pointer to the Xilinx DMA channel structure
1048 */
1049static void xilinx_dma_do_tasklet(unsigned long data)
1050{
1051 struct xilinx_dma_chan *chan = (struct xilinx_dma_chan *)data;
1052
1053 xilinx_dma_chan_desc_cleanup(chan);
1054}
1055
1056/**
1057 * xilinx_dma_alloc_chan_resources - Allocate channel resources
1058 * @dchan: DMA channel
1059 *
1060 * Return: '0' on success and failure value on error
1061 */
1062static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
1063{
1064 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1065 int i;
1066
1067 /* Has this channel already been allocated? */
1068 if (chan->desc_pool)
1069 return 0;
1070
1071 /*
1072 * We need the descriptor to be aligned to 64bytes
1073 * for meeting Xilinx VDMA specification requirement.
1074 */
1075 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
1076 /* Allocate the buffer descriptors. */
1077 chan->seg_v = dma_alloc_coherent(chan->dev,
1078 sizeof(*chan->seg_v) * XILINX_DMA_NUM_DESCS,
1079 &chan->seg_p, GFP_KERNEL);
1080 if (!chan->seg_v) {
1081 dev_err(chan->dev,
1082 "unable to allocate channel %d descriptors\n",
1083 chan->id);
1084 return -ENOMEM;
1085 }
1086 /*
1087 * For cyclic DMA mode we need to program the tail Descriptor
1088 * register with a value which is not a part of the BD chain
1089 * so allocating a desc segment during channel allocation for
1090 * programming tail descriptor.
1091 */
1092 chan->cyclic_seg_v = dma_alloc_coherent(chan->dev,
1093 sizeof(*chan->cyclic_seg_v),
1094 &chan->cyclic_seg_p,
1095 GFP_KERNEL);
1096 if (!chan->cyclic_seg_v) {
1097 dev_err(chan->dev,
1098 "unable to allocate desc segment for cyclic DMA\n");
1099 dma_free_coherent(chan->dev, sizeof(*chan->seg_v) *
1100 XILINX_DMA_NUM_DESCS, chan->seg_v,
1101 chan->seg_p);
1102 return -ENOMEM;
1103 }
1104 chan->cyclic_seg_v->phys = chan->cyclic_seg_p;
1105
1106 for (i = 0; i < XILINX_DMA_NUM_DESCS; i++) {
1107 chan->seg_v[i].hw.next_desc =
1108 lower_32_bits(chan->seg_p + sizeof(*chan->seg_v) *
1109 ((i + 1) % XILINX_DMA_NUM_DESCS));
1110 chan->seg_v[i].hw.next_desc_msb =
1111 upper_32_bits(chan->seg_p + sizeof(*chan->seg_v) *
1112 ((i + 1) % XILINX_DMA_NUM_DESCS));
1113 chan->seg_v[i].phys = chan->seg_p +
1114 sizeof(*chan->seg_v) * i;
1115 list_add_tail(&chan->seg_v[i].node,
1116 &chan->free_seg_list);
1117 }
1118 } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
1119 /* Allocate the buffer descriptors. */
1120 chan->seg_mv = dma_alloc_coherent(chan->dev,
1121 sizeof(*chan->seg_mv) *
1122 XILINX_DMA_NUM_DESCS,
1123 &chan->seg_p, GFP_KERNEL);
1124 if (!chan->seg_mv) {
1125 dev_err(chan->dev,
1126 "unable to allocate channel %d descriptors\n",
1127 chan->id);
1128 return -ENOMEM;
1129 }
1130 for (i = 0; i < XILINX_DMA_NUM_DESCS; i++) {
1131 chan->seg_mv[i].hw.next_desc =
1132 lower_32_bits(chan->seg_p + sizeof(*chan->seg_mv) *
1133 ((i + 1) % XILINX_DMA_NUM_DESCS));
1134 chan->seg_mv[i].hw.next_desc_msb =
1135 upper_32_bits(chan->seg_p + sizeof(*chan->seg_mv) *
1136 ((i + 1) % XILINX_DMA_NUM_DESCS));
1137 chan->seg_mv[i].phys = chan->seg_p +
1138 sizeof(*chan->seg_v) * i;
1139 list_add_tail(&chan->seg_mv[i].node,
1140 &chan->free_seg_list);
1141 }
1142 } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
1143 chan->desc_pool = dma_pool_create("xilinx_cdma_desc_pool",
1144 chan->dev,
1145 sizeof(struct xilinx_cdma_tx_segment),
1146 __alignof__(struct xilinx_cdma_tx_segment),
1147 0);
1148 } else {
1149 chan->desc_pool = dma_pool_create("xilinx_vdma_desc_pool",
1150 chan->dev,
1151 sizeof(struct xilinx_vdma_tx_segment),
1152 __alignof__(struct xilinx_vdma_tx_segment),
1153 0);
1154 }
1155
1156 if (!chan->desc_pool &&
1157 ((chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIDMA) &&
1158 chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIMCDMA)) {
1159 dev_err(chan->dev,
1160 "unable to allocate channel %d descriptor pool\n",
1161 chan->id);
1162 return -ENOMEM;
1163 }
1164
1165 dma_cookie_init(dchan);
1166
1167 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
1168 /* For AXI DMA resetting once channel will reset the
1169 * other channel as well so enable the interrupts here.
1170 */
1171 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1172 XILINX_DMA_DMAXR_ALL_IRQ_MASK);
1173 }
1174
1175 if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
1176 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1177 XILINX_CDMA_CR_SGMODE);
1178
1179 return 0;
1180}
1181
1182/**
1183 * xilinx_dma_calc_copysize - Calculate the amount of data to copy
1184 * @chan: Driver specific DMA channel
1185 * @size: Total data that needs to be copied
1186 * @done: Amount of data that has been already copied
1187 *
1188 * Return: Amount of data that has to be copied
1189 */
1190static int xilinx_dma_calc_copysize(struct xilinx_dma_chan *chan,
1191 int size, int done)
1192{
1193 size_t copy;
1194
1195 copy = min_t(size_t, size - done,
1196 chan->xdev->max_buffer_len);
1197
1198 if ((copy + done < size) &&
1199 chan->xdev->common.copy_align) {
1200 /*
1201 * If this is not the last descriptor, make sure
1202 * the next one will be properly aligned
1203 */
1204 copy = rounddown(copy,
1205 (1 << chan->xdev->common.copy_align));
1206 }
1207 return copy;
1208}
1209
1210/**
1211 * xilinx_dma_tx_status - Get DMA transaction status
1212 * @dchan: DMA channel
1213 * @cookie: Transaction identifier
1214 * @txstate: Transaction state
1215 *
1216 * Return: DMA transaction status
1217 */
1218static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
1219 dma_cookie_t cookie,
1220 struct dma_tx_state *txstate)
1221{
1222 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1223 struct xilinx_dma_tx_descriptor *desc;
1224 enum dma_status ret;
1225 unsigned long flags;
1226 u32 residue = 0;
1227
1228 ret = dma_cookie_status(dchan, cookie, txstate);
1229 if (ret == DMA_COMPLETE || !txstate)
1230 return ret;
1231
1232 spin_lock_irqsave(&chan->lock, flags);
1233 if (!list_empty(&chan->active_list)) {
1234 desc = list_last_entry(&chan->active_list,
1235 struct xilinx_dma_tx_descriptor, node);
1236 /*
1237 * VDMA and simple mode do not support residue reporting, so the
1238 * residue field will always be 0.
1239 */
1240 if (chan->has_sg && chan->xdev->dma_config->dmatype != XDMA_TYPE_VDMA)
1241 residue = xilinx_dma_get_residue(chan, desc);
1242 }
1243 spin_unlock_irqrestore(&chan->lock, flags);
1244
1245 dma_set_residue(txstate, residue);
1246
1247 return ret;
1248}
1249
1250/**
1251 * xilinx_dma_stop_transfer - Halt DMA channel
1252 * @chan: Driver specific DMA channel
1253 *
1254 * Return: '0' on success and failure value on error
1255 */
1256static int xilinx_dma_stop_transfer(struct xilinx_dma_chan *chan)
1257{
1258 u32 val;
1259
1260 dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
1261
1262 /* Wait for the hardware to halt */
1263 return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
1264 val & XILINX_DMA_DMASR_HALTED, 0,
1265 XILINX_DMA_LOOP_COUNT);
1266}
1267
1268/**
1269 * xilinx_cdma_stop_transfer - Wait for the current transfer to complete
1270 * @chan: Driver specific DMA channel
1271 *
1272 * Return: '0' on success and failure value on error
1273 */
1274static int xilinx_cdma_stop_transfer(struct xilinx_dma_chan *chan)
1275{
1276 u32 val;
1277
1278 return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
1279 val & XILINX_DMA_DMASR_IDLE, 0,
1280 XILINX_DMA_LOOP_COUNT);
1281}
1282
1283/**
1284 * xilinx_dma_start - Start DMA channel
1285 * @chan: Driver specific DMA channel
1286 */
1287static void xilinx_dma_start(struct xilinx_dma_chan *chan)
1288{
1289 int err;
1290 u32 val;
1291
1292 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
1293
1294 /* Wait for the hardware to start */
1295 err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
1296 !(val & XILINX_DMA_DMASR_HALTED), 0,
1297 XILINX_DMA_LOOP_COUNT);
1298
1299 if (err) {
1300 dev_err(chan->dev, "Cannot start channel %p: %x\n",
1301 chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
1302
1303 chan->err = true;
1304 }
1305}
1306
1307/**
1308 * xilinx_vdma_start_transfer - Starts VDMA transfer
1309 * @chan: Driver specific channel struct pointer
1310 */
1311static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
1312{
1313 struct xilinx_vdma_config *config = &chan->config;
1314 struct xilinx_dma_tx_descriptor *desc;
1315 u32 reg, j;
1316 struct xilinx_vdma_tx_segment *segment, *last = NULL;
1317 int i = 0;
1318
1319 /* This function was invoked with lock held */
1320 if (chan->err)
1321 return;
1322
1323 if (!chan->idle)
1324 return;
1325
1326 if (list_empty(&chan->pending_list))
1327 return;
1328
1329 desc = list_first_entry(&chan->pending_list,
1330 struct xilinx_dma_tx_descriptor, node);
1331
1332 /* Configure the hardware using info in the config structure */
1333 if (chan->has_vflip) {
1334 reg = dma_read(chan, XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP);
1335 reg &= ~XILINX_VDMA_ENABLE_VERTICAL_FLIP;
1336 reg |= config->vflip_en;
1337 dma_write(chan, XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP,
1338 reg);
1339 }
1340
1341 reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
1342
1343 if (config->frm_cnt_en)
1344 reg |= XILINX_DMA_DMACR_FRAMECNT_EN;
1345 else
1346 reg &= ~XILINX_DMA_DMACR_FRAMECNT_EN;
1347
1348 /* If not parking, enable circular mode */
1349 if (config->park)
1350 reg &= ~XILINX_DMA_DMACR_CIRC_EN;
1351 else
1352 reg |= XILINX_DMA_DMACR_CIRC_EN;
1353
1354 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
1355
1356 j = chan->desc_submitcount;
1357 reg = dma_read(chan, XILINX_DMA_REG_PARK_PTR);
1358 if (chan->direction == DMA_MEM_TO_DEV) {
1359 reg &= ~XILINX_DMA_PARK_PTR_RD_REF_MASK;
1360 reg |= j << XILINX_DMA_PARK_PTR_RD_REF_SHIFT;
1361 } else {
1362 reg &= ~XILINX_DMA_PARK_PTR_WR_REF_MASK;
1363 reg |= j << XILINX_DMA_PARK_PTR_WR_REF_SHIFT;
1364 }
1365 dma_write(chan, XILINX_DMA_REG_PARK_PTR, reg);
1366
1367 /* Start the hardware */
1368 xilinx_dma_start(chan);
1369
1370 if (chan->err)
1371 return;
1372
1373 /* Start the transfer */
1374 if (chan->desc_submitcount < chan->num_frms)
1375 i = chan->desc_submitcount;
1376
1377 list_for_each_entry(segment, &desc->segments, node) {
1378 if (chan->ext_addr)
1379 vdma_desc_write_64(chan,
1380 XILINX_VDMA_REG_START_ADDRESS_64(i++),
1381 segment->hw.buf_addr,
1382 segment->hw.buf_addr_msb);
1383 else
1384 vdma_desc_write(chan,
1385 XILINX_VDMA_REG_START_ADDRESS(i++),
1386 segment->hw.buf_addr);
1387
1388 last = segment;
1389 }
1390
1391 if (!last)
1392 return;
1393
1394 /* HW expects these parameters to be same for one transaction */
1395 vdma_desc_write(chan, XILINX_DMA_REG_HSIZE, last->hw.hsize);
1396 vdma_desc_write(chan, XILINX_DMA_REG_FRMDLY_STRIDE,
1397 last->hw.stride);
1398 vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize);
1399
1400 chan->desc_submitcount++;
1401 chan->desc_pendingcount--;
1402 list_del(&desc->node);
1403 list_add_tail(&desc->node, &chan->active_list);
1404 if (chan->desc_submitcount == chan->num_frms)
1405 chan->desc_submitcount = 0;
1406
1407 chan->idle = false;
1408}
1409
1410/**
1411 * xilinx_cdma_start_transfer - Starts cdma transfer
1412 * @chan: Driver specific channel struct pointer
1413 */
1414static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
1415{
1416 struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
1417 struct xilinx_cdma_tx_segment *tail_segment;
1418 u32 ctrl_reg = dma_read(chan, XILINX_DMA_REG_DMACR);
1419
1420 if (chan->err)
1421 return;
1422
1423 if (!chan->idle)
1424 return;
1425
1426 if (list_empty(&chan->pending_list))
1427 return;
1428
1429 head_desc = list_first_entry(&chan->pending_list,
1430 struct xilinx_dma_tx_descriptor, node);
1431 tail_desc = list_last_entry(&chan->pending_list,
1432 struct xilinx_dma_tx_descriptor, node);
1433 tail_segment = list_last_entry(&tail_desc->segments,
1434 struct xilinx_cdma_tx_segment, node);
1435
1436 if (chan->desc_pendingcount <= XILINX_DMA_COALESCE_MAX) {
1437 ctrl_reg &= ~XILINX_DMA_CR_COALESCE_MAX;
1438 ctrl_reg |= chan->desc_pendingcount <<
1439 XILINX_DMA_CR_COALESCE_SHIFT;
1440 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, ctrl_reg);
1441 }
1442
1443 if (chan->has_sg) {
1444 dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
1445 XILINX_CDMA_CR_SGMODE);
1446
1447 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1448 XILINX_CDMA_CR_SGMODE);
1449
1450 xilinx_write(chan, XILINX_DMA_REG_CURDESC,
1451 head_desc->async_tx.phys);
1452
1453 /* Update tail ptr register which will start the transfer */
1454 xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
1455 tail_segment->phys);
1456 } else {
1457 /* In simple mode */
1458 struct xilinx_cdma_tx_segment *segment;
1459 struct xilinx_cdma_desc_hw *hw;
1460
1461 segment = list_first_entry(&head_desc->segments,
1462 struct xilinx_cdma_tx_segment,
1463 node);
1464
1465 hw = &segment->hw;
1466
1467 xilinx_write(chan, XILINX_CDMA_REG_SRCADDR,
1468 xilinx_prep_dma_addr_t(hw->src_addr));
1469 xilinx_write(chan, XILINX_CDMA_REG_DSTADDR,
1470 xilinx_prep_dma_addr_t(hw->dest_addr));
1471
1472 /* Start the transfer */
1473 dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
1474 hw->control & chan->xdev->max_buffer_len);
1475 }
1476
1477 list_splice_tail_init(&chan->pending_list, &chan->active_list);
1478 chan->desc_pendingcount = 0;
1479 chan->idle = false;
1480}
1481
1482/**
1483 * xilinx_dma_start_transfer - Starts DMA transfer
1484 * @chan: Driver specific channel struct pointer
1485 */
1486static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
1487{
1488 struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
1489 struct xilinx_axidma_tx_segment *tail_segment;
1490 u32 reg;
1491
1492 if (chan->err)
1493 return;
1494
1495 if (list_empty(&chan->pending_list))
1496 return;
1497
1498 if (!chan->idle)
1499 return;
1500
1501 head_desc = list_first_entry(&chan->pending_list,
1502 struct xilinx_dma_tx_descriptor, node);
1503 tail_desc = list_last_entry(&chan->pending_list,
1504 struct xilinx_dma_tx_descriptor, node);
1505 tail_segment = list_last_entry(&tail_desc->segments,
1506 struct xilinx_axidma_tx_segment, node);
1507
1508 reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
1509
1510 if (chan->desc_pendingcount <= XILINX_DMA_COALESCE_MAX) {
1511 reg &= ~XILINX_DMA_CR_COALESCE_MAX;
1512 reg |= chan->desc_pendingcount <<
1513 XILINX_DMA_CR_COALESCE_SHIFT;
1514 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
1515 }
1516
1517 if (chan->has_sg)
1518 xilinx_write(chan, XILINX_DMA_REG_CURDESC,
1519 head_desc->async_tx.phys);
1520
1521 xilinx_dma_start(chan);
1522
1523 if (chan->err)
1524 return;
1525
1526 /* Start the transfer */
1527 if (chan->has_sg) {
1528 if (chan->cyclic)
1529 xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
1530 chan->cyclic_seg_v->phys);
1531 else
1532 xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
1533 tail_segment->phys);
1534 } else {
1535 struct xilinx_axidma_tx_segment *segment;
1536 struct xilinx_axidma_desc_hw *hw;
1537
1538 segment = list_first_entry(&head_desc->segments,
1539 struct xilinx_axidma_tx_segment,
1540 node);
1541 hw = &segment->hw;
1542
1543 xilinx_write(chan, XILINX_DMA_REG_SRCDSTADDR,
1544 xilinx_prep_dma_addr_t(hw->buf_addr));
1545
1546 /* Start the transfer */
1547 dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
1548 hw->control & chan->xdev->max_buffer_len);
1549 }
1550
1551 list_splice_tail_init(&chan->pending_list, &chan->active_list);
1552 chan->desc_pendingcount = 0;
1553 chan->idle = false;
1554}
1555
1556/**
1557 * xilinx_mcdma_start_transfer - Starts MCDMA transfer
1558 * @chan: Driver specific channel struct pointer
1559 */
1560static void xilinx_mcdma_start_transfer(struct xilinx_dma_chan *chan)
1561{
1562 struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
1563 struct xilinx_axidma_tx_segment *tail_segment;
1564 u32 reg;
1565
1566 /*
1567 * lock has been held by calling functions, so we don't need it
1568 * to take it here again.
1569 */
1570
1571 if (chan->err)
1572 return;
1573
1574 if (!chan->idle)
1575 return;
1576
1577 if (list_empty(&chan->pending_list))
1578 return;
1579
1580 head_desc = list_first_entry(&chan->pending_list,
1581 struct xilinx_dma_tx_descriptor, node);
1582 tail_desc = list_last_entry(&chan->pending_list,
1583 struct xilinx_dma_tx_descriptor, node);
1584 tail_segment = list_last_entry(&tail_desc->segments,
1585 struct xilinx_axidma_tx_segment, node);
1586
1587 reg = dma_ctrl_read(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest));
1588
1589 if (chan->desc_pendingcount <= XILINX_MCDMA_COALESCE_MAX) {
1590 reg &= ~XILINX_MCDMA_COALESCE_MASK;
1591 reg |= chan->desc_pendingcount <<
1592 XILINX_MCDMA_COALESCE_SHIFT;
1593 }
1594
1595 reg |= XILINX_MCDMA_IRQ_ALL_MASK;
1596 dma_ctrl_write(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest), reg);
1597
1598 /* Program current descriptor */
1599 xilinx_write(chan, XILINX_MCDMA_CHAN_CDESC_OFFSET(chan->tdest),
1600 head_desc->async_tx.phys);
1601
1602 /* Program channel enable register */
1603 reg = dma_ctrl_read(chan, XILINX_MCDMA_CHEN_OFFSET);
1604 reg |= BIT(chan->tdest);
1605 dma_ctrl_write(chan, XILINX_MCDMA_CHEN_OFFSET, reg);
1606
1607 /* Start the fetch of BDs for the channel */
1608 reg = dma_ctrl_read(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest));
1609 reg |= XILINX_MCDMA_CR_RUNSTOP_MASK;
1610 dma_ctrl_write(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest), reg);
1611
1612 xilinx_dma_start(chan);
1613
1614 if (chan->err)
1615 return;
1616
1617 /* Start the transfer */
1618 xilinx_write(chan, XILINX_MCDMA_CHAN_TDESC_OFFSET(chan->tdest),
1619 tail_segment->phys);
1620
1621 list_splice_tail_init(&chan->pending_list, &chan->active_list);
1622 chan->desc_pendingcount = 0;
1623 chan->idle = false;
1624}
1625
1626/**
1627 * xilinx_dma_issue_pending - Issue pending transactions
1628 * @dchan: DMA channel
1629 */
1630static void xilinx_dma_issue_pending(struct dma_chan *dchan)
1631{
1632 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1633 unsigned long flags;
1634
1635 spin_lock_irqsave(&chan->lock, flags);
1636 chan->start_transfer(chan);
1637 spin_unlock_irqrestore(&chan->lock, flags);
1638}
1639
1640/**
1641 * xilinx_dma_complete_descriptor - Mark the active descriptor as complete
1642 * @chan : xilinx DMA channel
1643 *
1644 * CONTEXT: hardirq
1645 */
1646static void xilinx_dma_complete_descriptor(struct xilinx_dma_chan *chan)
1647{
1648 struct xilinx_dma_tx_descriptor *desc, *next;
1649
1650 /* This function was invoked with lock held */
1651 if (list_empty(&chan->active_list))
1652 return;
1653
1654 list_for_each_entry_safe(desc, next, &chan->active_list, node) {
1655 if (chan->has_sg && chan->xdev->dma_config->dmatype !=
1656 XDMA_TYPE_VDMA)
1657 desc->residue = xilinx_dma_get_residue(chan, desc);
1658 else
1659 desc->residue = 0;
1660 desc->err = chan->err;
1661
1662 list_del(&desc->node);
1663 if (!desc->cyclic)
1664 dma_cookie_complete(&desc->async_tx);
1665 list_add_tail(&desc->node, &chan->done_list);
1666 }
1667}
1668
1669/**
1670 * xilinx_dma_reset - Reset DMA channel
1671 * @chan: Driver specific DMA channel
1672 *
1673 * Return: '0' on success and failure value on error
1674 */
1675static int xilinx_dma_reset(struct xilinx_dma_chan *chan)
1676{
1677 int err;
1678 u32 tmp;
1679
1680 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RESET);
1681
1682 /* Wait for the hardware to finish reset */
1683 err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMACR, tmp,
1684 !(tmp & XILINX_DMA_DMACR_RESET), 0,
1685 XILINX_DMA_LOOP_COUNT);
1686
1687 if (err) {
1688 dev_err(chan->dev, "reset timeout, cr %x, sr %x\n",
1689 dma_ctrl_read(chan, XILINX_DMA_REG_DMACR),
1690 dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
1691 return -ETIMEDOUT;
1692 }
1693
1694 chan->err = false;
1695 chan->idle = true;
1696 chan->desc_pendingcount = 0;
1697 chan->desc_submitcount = 0;
1698
1699 return err;
1700}
1701
1702/**
1703 * xilinx_dma_chan_reset - Reset DMA channel and enable interrupts
1704 * @chan: Driver specific DMA channel
1705 *
1706 * Return: '0' on success and failure value on error
1707 */
1708static int xilinx_dma_chan_reset(struct xilinx_dma_chan *chan)
1709{
1710 int err;
1711
1712 /* Reset VDMA */
1713 err = xilinx_dma_reset(chan);
1714 if (err)
1715 return err;
1716
1717 /* Enable interrupts */
1718 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1719 XILINX_DMA_DMAXR_ALL_IRQ_MASK);
1720
1721 return 0;
1722}
1723
1724/**
1725 * xilinx_mcdma_irq_handler - MCDMA Interrupt handler
1726 * @irq: IRQ number
1727 * @data: Pointer to the Xilinx MCDMA channel structure
1728 *
1729 * Return: IRQ_HANDLED/IRQ_NONE
1730 */
1731static irqreturn_t xilinx_mcdma_irq_handler(int irq, void *data)
1732{
1733 struct xilinx_dma_chan *chan = data;
1734 u32 status, ser_offset, chan_sermask, chan_offset = 0, chan_id;
1735
1736 if (chan->direction == DMA_DEV_TO_MEM)
1737 ser_offset = XILINX_MCDMA_RXINT_SER_OFFSET;
1738 else
1739 ser_offset = XILINX_MCDMA_TXINT_SER_OFFSET;
1740
1741 /* Read the channel id raising the interrupt*/
1742 chan_sermask = dma_ctrl_read(chan, ser_offset);
1743 chan_id = ffs(chan_sermask);
1744
1745 if (!chan_id)
1746 return IRQ_NONE;
1747
1748 if (chan->direction == DMA_DEV_TO_MEM)
1749 chan_offset = chan->xdev->dma_config->max_channels / 2;
1750
1751 chan_offset = chan_offset + (chan_id - 1);
1752 chan = chan->xdev->chan[chan_offset];
1753 /* Read the status and ack the interrupts. */
1754 status = dma_ctrl_read(chan, XILINX_MCDMA_CHAN_SR_OFFSET(chan->tdest));
1755 if (!(status & XILINX_MCDMA_IRQ_ALL_MASK))
1756 return IRQ_NONE;
1757
1758 dma_ctrl_write(chan, XILINX_MCDMA_CHAN_SR_OFFSET(chan->tdest),
1759 status & XILINX_MCDMA_IRQ_ALL_MASK);
1760
1761 if (status & XILINX_MCDMA_IRQ_ERR_MASK) {
1762 dev_err(chan->dev, "Channel %p has errors %x cdr %x tdr %x\n",
1763 chan,
1764 dma_ctrl_read(chan, XILINX_MCDMA_CH_ERR_OFFSET),
1765 dma_ctrl_read(chan, XILINX_MCDMA_CHAN_CDESC_OFFSET
1766 (chan->tdest)),
1767 dma_ctrl_read(chan, XILINX_MCDMA_CHAN_TDESC_OFFSET
1768 (chan->tdest)));
1769 chan->err = true;
1770 }
1771
1772 if (status & XILINX_MCDMA_IRQ_DELAY_MASK) {
1773 /*
1774 * Device takes too long to do the transfer when user requires
1775 * responsiveness.
1776 */
1777 dev_dbg(chan->dev, "Inter-packet latency too long\n");
1778 }
1779
1780 if (status & XILINX_MCDMA_IRQ_IOC_MASK) {
1781 spin_lock(&chan->lock);
1782 xilinx_dma_complete_descriptor(chan);
1783 chan->idle = true;
1784 chan->start_transfer(chan);
1785 spin_unlock(&chan->lock);
1786 }
1787
1788 tasklet_schedule(&chan->tasklet);
1789 return IRQ_HANDLED;
1790}
1791
1792/**
1793 * xilinx_dma_irq_handler - DMA Interrupt handler
1794 * @irq: IRQ number
1795 * @data: Pointer to the Xilinx DMA channel structure
1796 *
1797 * Return: IRQ_HANDLED/IRQ_NONE
1798 */
1799static irqreturn_t xilinx_dma_irq_handler(int irq, void *data)
1800{
1801 struct xilinx_dma_chan *chan = data;
1802 u32 status;
1803
1804 /* Read the status and ack the interrupts. */
1805 status = dma_ctrl_read(chan, XILINX_DMA_REG_DMASR);
1806 if (!(status & XILINX_DMA_DMAXR_ALL_IRQ_MASK))
1807 return IRQ_NONE;
1808
1809 dma_ctrl_write(chan, XILINX_DMA_REG_DMASR,
1810 status & XILINX_DMA_DMAXR_ALL_IRQ_MASK);
1811
1812 if (status & XILINX_DMA_DMASR_ERR_IRQ) {
1813 /*
1814 * An error occurred. If C_FLUSH_ON_FSYNC is enabled and the
1815 * error is recoverable, ignore it. Otherwise flag the error.
1816 *
1817 * Only recoverable errors can be cleared in the DMASR register,
1818 * make sure not to write to other error bits to 1.
1819 */
1820 u32 errors = status & XILINX_DMA_DMASR_ALL_ERR_MASK;
1821
1822 dma_ctrl_write(chan, XILINX_DMA_REG_DMASR,
1823 errors & XILINX_DMA_DMASR_ERR_RECOVER_MASK);
1824
1825 if (!chan->flush_on_fsync ||
1826 (errors & ~XILINX_DMA_DMASR_ERR_RECOVER_MASK)) {
1827 dev_err(chan->dev,
1828 "Channel %p has errors %x, cdr %x tdr %x\n",
1829 chan, errors,
1830 dma_ctrl_read(chan, XILINX_DMA_REG_CURDESC),
1831 dma_ctrl_read(chan, XILINX_DMA_REG_TAILDESC));
1832 chan->err = true;
1833 }
1834 }
1835
1836 if (status & XILINX_DMA_DMASR_DLY_CNT_IRQ) {
1837 /*
1838 * Device takes too long to do the transfer when user requires
1839 * responsiveness.
1840 */
1841 dev_dbg(chan->dev, "Inter-packet latency too long\n");
1842 }
1843
1844 if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) {
1845 spin_lock(&chan->lock);
1846 xilinx_dma_complete_descriptor(chan);
1847 chan->idle = true;
1848 chan->start_transfer(chan);
1849 spin_unlock(&chan->lock);
1850 }
1851
1852 tasklet_schedule(&chan->tasklet);
1853 return IRQ_HANDLED;
1854}
1855
1856/**
1857 * append_desc_queue - Queuing descriptor
1858 * @chan: Driver specific dma channel
1859 * @desc: dma transaction descriptor
1860 */
1861static void append_desc_queue(struct xilinx_dma_chan *chan,
1862 struct xilinx_dma_tx_descriptor *desc)
1863{
1864 struct xilinx_vdma_tx_segment *tail_segment;
1865 struct xilinx_dma_tx_descriptor *tail_desc;
1866 struct xilinx_axidma_tx_segment *axidma_tail_segment;
1867 struct xilinx_cdma_tx_segment *cdma_tail_segment;
1868
1869 if (list_empty(&chan->pending_list))
1870 goto append;
1871
1872 /*
1873 * Add the hardware descriptor to the chain of hardware descriptors
1874 * that already exists in memory.
1875 */
1876 tail_desc = list_last_entry(&chan->pending_list,
1877 struct xilinx_dma_tx_descriptor, node);
1878 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
1879 tail_segment = list_last_entry(&tail_desc->segments,
1880 struct xilinx_vdma_tx_segment,
1881 node);
1882 tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
1883 } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
1884 cdma_tail_segment = list_last_entry(&tail_desc->segments,
1885 struct xilinx_cdma_tx_segment,
1886 node);
1887 cdma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
1888 } else {
1889 axidma_tail_segment = list_last_entry(&tail_desc->segments,
1890 struct xilinx_axidma_tx_segment,
1891 node);
1892 axidma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
1893 }
1894
1895 /*
1896 * Add the software descriptor and all children to the list
1897 * of pending transactions
1898 */
1899append:
1900 list_add_tail(&desc->node, &chan->pending_list);
1901 chan->desc_pendingcount++;
1902
1903 if (chan->has_sg && (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA)
1904 && unlikely(chan->desc_pendingcount > chan->num_frms)) {
1905 dev_dbg(chan->dev, "desc pendingcount is too high\n");
1906 chan->desc_pendingcount = chan->num_frms;
1907 }
1908}
1909
1910/**
1911 * xilinx_dma_tx_submit - Submit DMA transaction
1912 * @tx: Async transaction descriptor
1913 *
1914 * Return: cookie value on success and failure value on error
1915 */
1916static dma_cookie_t xilinx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
1917{
1918 struct xilinx_dma_tx_descriptor *desc = to_dma_tx_descriptor(tx);
1919 struct xilinx_dma_chan *chan = to_xilinx_chan(tx->chan);
1920 dma_cookie_t cookie;
1921 unsigned long flags;
1922 int err;
1923
1924 if (chan->cyclic) {
1925 xilinx_dma_free_tx_descriptor(chan, desc);
1926 return -EBUSY;
1927 }
1928
1929 if (chan->err) {
1930 /*
1931 * If reset fails, need to hard reset the system.
1932 * Channel is no longer functional
1933 */
1934 err = xilinx_dma_chan_reset(chan);
1935 if (err < 0)
1936 return err;
1937 }
1938
1939 spin_lock_irqsave(&chan->lock, flags);
1940
1941 cookie = dma_cookie_assign(tx);
1942
1943 /* Put this transaction onto the tail of the pending queue */
1944 append_desc_queue(chan, desc);
1945
1946 if (desc->cyclic)
1947 chan->cyclic = true;
1948
1949 spin_unlock_irqrestore(&chan->lock, flags);
1950
1951 return cookie;
1952}
1953
1954/**
1955 * xilinx_vdma_dma_prep_interleaved - prepare a descriptor for a
1956 * DMA_SLAVE transaction
1957 * @dchan: DMA channel
1958 * @xt: Interleaved template pointer
1959 * @flags: transfer ack flags
1960 *
1961 * Return: Async transaction descriptor on success and NULL on failure
1962 */
1963static struct dma_async_tx_descriptor *
1964xilinx_vdma_dma_prep_interleaved(struct dma_chan *dchan,
1965 struct dma_interleaved_template *xt,
1966 unsigned long flags)
1967{
1968 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1969 struct xilinx_dma_tx_descriptor *desc;
1970 struct xilinx_vdma_tx_segment *segment;
1971 struct xilinx_vdma_desc_hw *hw;
1972
1973 if (!is_slave_direction(xt->dir))
1974 return NULL;
1975
1976 if (!xt->numf || !xt->sgl[0].size)
1977 return NULL;
1978
1979 if (xt->frame_size != 1)
1980 return NULL;
1981
1982 /* Allocate a transaction descriptor. */
1983 desc = xilinx_dma_alloc_tx_descriptor(chan);
1984 if (!desc)
1985 return NULL;
1986
1987 dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
1988 desc->async_tx.tx_submit = xilinx_dma_tx_submit;
1989 async_tx_ack(&desc->async_tx);
1990
1991 /* Allocate the link descriptor from DMA pool */
1992 segment = xilinx_vdma_alloc_tx_segment(chan);
1993 if (!segment)
1994 goto error;
1995
1996 /* Fill in the hardware descriptor */
1997 hw = &segment->hw;
1998 hw->vsize = xt->numf;
1999 hw->hsize = xt->sgl[0].size;
2000 hw->stride = (xt->sgl[0].icg + xt->sgl[0].size) <<
2001 XILINX_DMA_FRMDLY_STRIDE_STRIDE_SHIFT;
2002 hw->stride |= chan->config.frm_dly <<
2003 XILINX_DMA_FRMDLY_STRIDE_FRMDLY_SHIFT;
2004
2005 if (xt->dir != DMA_MEM_TO_DEV) {
2006 if (chan->ext_addr) {
2007 hw->buf_addr = lower_32_bits(xt->dst_start);
2008 hw->buf_addr_msb = upper_32_bits(xt->dst_start);
2009 } else {
2010 hw->buf_addr = xt->dst_start;
2011 }
2012 } else {
2013 if (chan->ext_addr) {
2014 hw->buf_addr = lower_32_bits(xt->src_start);
2015 hw->buf_addr_msb = upper_32_bits(xt->src_start);
2016 } else {
2017 hw->buf_addr = xt->src_start;
2018 }
2019 }
2020
2021 /* Insert the segment into the descriptor segments list. */
2022 list_add_tail(&segment->node, &desc->segments);
2023
2024 /* Link the last hardware descriptor with the first. */
2025 segment = list_first_entry(&desc->segments,
2026 struct xilinx_vdma_tx_segment, node);
2027 desc->async_tx.phys = segment->phys;
2028
2029 return &desc->async_tx;
2030
2031error:
2032 xilinx_dma_free_tx_descriptor(chan, desc);
2033 return NULL;
2034}
2035
2036/**
2037 * xilinx_cdma_prep_memcpy - prepare descriptors for a memcpy transaction
2038 * @dchan: DMA channel
2039 * @dma_dst: destination address
2040 * @dma_src: source address
2041 * @len: transfer length
2042 * @flags: transfer ack flags
2043 *
2044 * Return: Async transaction descriptor on success and NULL on failure
2045 */
2046static struct dma_async_tx_descriptor *
2047xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
2048 dma_addr_t dma_src, size_t len, unsigned long flags)
2049{
2050 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2051 struct xilinx_dma_tx_descriptor *desc;
2052 struct xilinx_cdma_tx_segment *segment;
2053 struct xilinx_cdma_desc_hw *hw;
2054
2055 if (!len || len > chan->xdev->max_buffer_len)
2056 return NULL;
2057
2058 desc = xilinx_dma_alloc_tx_descriptor(chan);
2059 if (!desc)
2060 return NULL;
2061
2062 dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2063 desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2064
2065 /* Allocate the link descriptor from DMA pool */
2066 segment = xilinx_cdma_alloc_tx_segment(chan);
2067 if (!segment)
2068 goto error;
2069
2070 hw = &segment->hw;
2071 hw->control = len;
2072 hw->src_addr = dma_src;
2073 hw->dest_addr = dma_dst;
2074 if (chan->ext_addr) {
2075 hw->src_addr_msb = upper_32_bits(dma_src);
2076 hw->dest_addr_msb = upper_32_bits(dma_dst);
2077 }
2078
2079 /* Insert the segment into the descriptor segments list. */
2080 list_add_tail(&segment->node, &desc->segments);
2081
2082 desc->async_tx.phys = segment->phys;
2083 hw->next_desc = segment->phys;
2084
2085 return &desc->async_tx;
2086
2087error:
2088 xilinx_dma_free_tx_descriptor(chan, desc);
2089 return NULL;
2090}
2091
2092/**
2093 * xilinx_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
2094 * @dchan: DMA channel
2095 * @sgl: scatterlist to transfer to/from
2096 * @sg_len: number of entries in @scatterlist
2097 * @direction: DMA direction
2098 * @flags: transfer ack flags
2099 * @context: APP words of the descriptor
2100 *
2101 * Return: Async transaction descriptor on success and NULL on failure
2102 */
2103static struct dma_async_tx_descriptor *xilinx_dma_prep_slave_sg(
2104 struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len,
2105 enum dma_transfer_direction direction, unsigned long flags,
2106 void *context)
2107{
2108 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2109 struct xilinx_dma_tx_descriptor *desc;
2110 struct xilinx_axidma_tx_segment *segment = NULL;
2111 u32 *app_w = (u32 *)context;
2112 struct scatterlist *sg;
2113 size_t copy;
2114 size_t sg_used;
2115 unsigned int i;
2116
2117 if (!is_slave_direction(direction))
2118 return NULL;
2119
2120 /* Allocate a transaction descriptor. */
2121 desc = xilinx_dma_alloc_tx_descriptor(chan);
2122 if (!desc)
2123 return NULL;
2124
2125 dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2126 desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2127
2128 /* Build transactions using information in the scatter gather list */
2129 for_each_sg(sgl, sg, sg_len, i) {
2130 sg_used = 0;
2131
2132 /* Loop until the entire scatterlist entry is used */
2133 while (sg_used < sg_dma_len(sg)) {
2134 struct xilinx_axidma_desc_hw *hw;
2135
2136 /* Get a free segment */
2137 segment = xilinx_axidma_alloc_tx_segment(chan);
2138 if (!segment)
2139 goto error;
2140
2141 /*
2142 * Calculate the maximum number of bytes to transfer,
2143 * making sure it is less than the hw limit
2144 */
2145 copy = xilinx_dma_calc_copysize(chan, sg_dma_len(sg),
2146 sg_used);
2147 hw = &segment->hw;
2148
2149 /* Fill in the descriptor */
2150 xilinx_axidma_buf(chan, hw, sg_dma_address(sg),
2151 sg_used, 0);
2152
2153 hw->control = copy;
2154
2155 if (chan->direction == DMA_MEM_TO_DEV) {
2156 if (app_w)
2157 memcpy(hw->app, app_w, sizeof(u32) *
2158 XILINX_DMA_NUM_APP_WORDS);
2159 }
2160
2161 sg_used += copy;
2162
2163 /*
2164 * Insert the segment into the descriptor segments
2165 * list.
2166 */
2167 list_add_tail(&segment->node, &desc->segments);
2168 }
2169 }
2170
2171 segment = list_first_entry(&desc->segments,
2172 struct xilinx_axidma_tx_segment, node);
2173 desc->async_tx.phys = segment->phys;
2174
2175 /* For the last DMA_MEM_TO_DEV transfer, set EOP */
2176 if (chan->direction == DMA_MEM_TO_DEV) {
2177 segment->hw.control |= XILINX_DMA_BD_SOP;
2178 segment = list_last_entry(&desc->segments,
2179 struct xilinx_axidma_tx_segment,
2180 node);
2181 segment->hw.control |= XILINX_DMA_BD_EOP;
2182 }
2183
2184 return &desc->async_tx;
2185
2186error:
2187 xilinx_dma_free_tx_descriptor(chan, desc);
2188 return NULL;
2189}
2190
2191/**
2192 * xilinx_dma_prep_dma_cyclic - prepare descriptors for a DMA_SLAVE transaction
2193 * @dchan: DMA channel
2194 * @buf_addr: Physical address of the buffer
2195 * @buf_len: Total length of the cyclic buffers
2196 * @period_len: length of individual cyclic buffer
2197 * @direction: DMA direction
2198 * @flags: transfer ack flags
2199 *
2200 * Return: Async transaction descriptor on success and NULL on failure
2201 */
2202static struct dma_async_tx_descriptor *xilinx_dma_prep_dma_cyclic(
2203 struct dma_chan *dchan, dma_addr_t buf_addr, size_t buf_len,
2204 size_t period_len, enum dma_transfer_direction direction,
2205 unsigned long flags)
2206{
2207 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2208 struct xilinx_dma_tx_descriptor *desc;
2209 struct xilinx_axidma_tx_segment *segment, *head_segment, *prev = NULL;
2210 size_t copy, sg_used;
2211 unsigned int num_periods;
2212 int i;
2213 u32 reg;
2214
2215 if (!period_len)
2216 return NULL;
2217
2218 num_periods = buf_len / period_len;
2219
2220 if (!num_periods)
2221 return NULL;
2222
2223 if (!is_slave_direction(direction))
2224 return NULL;
2225
2226 /* Allocate a transaction descriptor. */
2227 desc = xilinx_dma_alloc_tx_descriptor(chan);
2228 if (!desc)
2229 return NULL;
2230
2231 chan->direction = direction;
2232 dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2233 desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2234
2235 for (i = 0; i < num_periods; ++i) {
2236 sg_used = 0;
2237
2238 while (sg_used < period_len) {
2239 struct xilinx_axidma_desc_hw *hw;
2240
2241 /* Get a free segment */
2242 segment = xilinx_axidma_alloc_tx_segment(chan);
2243 if (!segment)
2244 goto error;
2245
2246 /*
2247 * Calculate the maximum number of bytes to transfer,
2248 * making sure it is less than the hw limit
2249 */
2250 copy = xilinx_dma_calc_copysize(chan, period_len,
2251 sg_used);
2252 hw = &segment->hw;
2253 xilinx_axidma_buf(chan, hw, buf_addr, sg_used,
2254 period_len * i);
2255 hw->control = copy;
2256
2257 if (prev)
2258 prev->hw.next_desc = segment->phys;
2259
2260 prev = segment;
2261 sg_used += copy;
2262
2263 /*
2264 * Insert the segment into the descriptor segments
2265 * list.
2266 */
2267 list_add_tail(&segment->node, &desc->segments);
2268 }
2269 }
2270
2271 head_segment = list_first_entry(&desc->segments,
2272 struct xilinx_axidma_tx_segment, node);
2273 desc->async_tx.phys = head_segment->phys;
2274
2275 desc->cyclic = true;
2276 reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
2277 reg |= XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
2278 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
2279
2280 segment = list_last_entry(&desc->segments,
2281 struct xilinx_axidma_tx_segment,
2282 node);
2283 segment->hw.next_desc = (u32) head_segment->phys;
2284
2285 /* For the last DMA_MEM_TO_DEV transfer, set EOP */
2286 if (direction == DMA_MEM_TO_DEV) {
2287 head_segment->hw.control |= XILINX_DMA_BD_SOP;
2288 segment->hw.control |= XILINX_DMA_BD_EOP;
2289 }
2290
2291 return &desc->async_tx;
2292
2293error:
2294 xilinx_dma_free_tx_descriptor(chan, desc);
2295 return NULL;
2296}
2297
2298/**
2299 * xilinx_mcdma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
2300 * @dchan: DMA channel
2301 * @sgl: scatterlist to transfer to/from
2302 * @sg_len: number of entries in @scatterlist
2303 * @direction: DMA direction
2304 * @flags: transfer ack flags
2305 * @context: APP words of the descriptor
2306 *
2307 * Return: Async transaction descriptor on success and NULL on failure
2308 */
2309static struct dma_async_tx_descriptor *
2310xilinx_mcdma_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
2311 unsigned int sg_len,
2312 enum dma_transfer_direction direction,
2313 unsigned long flags, void *context)
2314{
2315 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2316 struct xilinx_dma_tx_descriptor *desc;
2317 struct xilinx_aximcdma_tx_segment *segment = NULL;
2318 u32 *app_w = (u32 *)context;
2319 struct scatterlist *sg;
2320 size_t copy;
2321 size_t sg_used;
2322 unsigned int i;
2323
2324 if (!is_slave_direction(direction))
2325 return NULL;
2326
2327 /* Allocate a transaction descriptor. */
2328 desc = xilinx_dma_alloc_tx_descriptor(chan);
2329 if (!desc)
2330 return NULL;
2331
2332 dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2333 desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2334
2335 /* Build transactions using information in the scatter gather list */
2336 for_each_sg(sgl, sg, sg_len, i) {
2337 sg_used = 0;
2338
2339 /* Loop until the entire scatterlist entry is used */
2340 while (sg_used < sg_dma_len(sg)) {
2341 struct xilinx_aximcdma_desc_hw *hw;
2342
2343 /* Get a free segment */
2344 segment = xilinx_aximcdma_alloc_tx_segment(chan);
2345 if (!segment)
2346 goto error;
2347
2348 /*
2349 * Calculate the maximum number of bytes to transfer,
2350 * making sure it is less than the hw limit
2351 */
2352 copy = min_t(size_t, sg_dma_len(sg) - sg_used,
2353 chan->xdev->max_buffer_len);
2354 hw = &segment->hw;
2355
2356 /* Fill in the descriptor */
2357 xilinx_aximcdma_buf(chan, hw, sg_dma_address(sg),
2358 sg_used);
2359 hw->control = copy;
2360
2361 if (chan->direction == DMA_MEM_TO_DEV && app_w) {
2362 memcpy(hw->app, app_w, sizeof(u32) *
2363 XILINX_DMA_NUM_APP_WORDS);
2364 }
2365
2366 sg_used += copy;
2367 /*
2368 * Insert the segment into the descriptor segments
2369 * list.
2370 */
2371 list_add_tail(&segment->node, &desc->segments);
2372 }
2373 }
2374
2375 segment = list_first_entry(&desc->segments,
2376 struct xilinx_aximcdma_tx_segment, node);
2377 desc->async_tx.phys = segment->phys;
2378
2379 /* For the last DMA_MEM_TO_DEV transfer, set EOP */
2380 if (chan->direction == DMA_MEM_TO_DEV) {
2381 segment->hw.control |= XILINX_MCDMA_BD_SOP;
2382 segment = list_last_entry(&desc->segments,
2383 struct xilinx_aximcdma_tx_segment,
2384 node);
2385 segment->hw.control |= XILINX_MCDMA_BD_EOP;
2386 }
2387
2388 return &desc->async_tx;
2389
2390error:
2391 xilinx_dma_free_tx_descriptor(chan, desc);
2392
2393 return NULL;
2394}
2395
2396/**
2397 * xilinx_dma_terminate_all - Halt the channel and free descriptors
2398 * @dchan: Driver specific DMA Channel pointer
2399 *
2400 * Return: '0' always.
2401 */
2402static int xilinx_dma_terminate_all(struct dma_chan *dchan)
2403{
2404 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2405 u32 reg;
2406 int err;
2407
2408 if (!chan->cyclic) {
2409 err = chan->stop_transfer(chan);
2410 if (err) {
2411 dev_err(chan->dev, "Cannot stop channel %p: %x\n",
2412 chan, dma_ctrl_read(chan,
2413 XILINX_DMA_REG_DMASR));
2414 chan->err = true;
2415 }
2416 }
2417
2418 xilinx_dma_chan_reset(chan);
2419 /* Remove and free all of the descriptors in the lists */
2420 xilinx_dma_free_descriptors(chan);
2421 chan->idle = true;
2422
2423 if (chan->cyclic) {
2424 reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
2425 reg &= ~XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
2426 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
2427 chan->cyclic = false;
2428 }
2429
2430 if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
2431 dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
2432 XILINX_CDMA_CR_SGMODE);
2433
2434 return 0;
2435}
2436
2437/**
2438 * xilinx_dma_channel_set_config - Configure VDMA channel
2439 * Run-time configuration for Axi VDMA, supports:
2440 * . halt the channel
2441 * . configure interrupt coalescing and inter-packet delay threshold
2442 * . start/stop parking
2443 * . enable genlock
2444 *
2445 * @dchan: DMA channel
2446 * @cfg: VDMA device configuration pointer
2447 *
2448 * Return: '0' on success and failure value on error
2449 */
2450int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
2451 struct xilinx_vdma_config *cfg)
2452{
2453 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2454 u32 dmacr;
2455
2456 if (cfg->reset)
2457 return xilinx_dma_chan_reset(chan);
2458
2459 dmacr = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
2460
2461 chan->config.frm_dly = cfg->frm_dly;
2462 chan->config.park = cfg->park;
2463
2464 /* genlock settings */
2465 chan->config.gen_lock = cfg->gen_lock;
2466 chan->config.master = cfg->master;
2467
2468 dmacr &= ~XILINX_DMA_DMACR_GENLOCK_EN;
2469 if (cfg->gen_lock && chan->genlock) {
2470 dmacr |= XILINX_DMA_DMACR_GENLOCK_EN;
2471 dmacr &= ~XILINX_DMA_DMACR_MASTER_MASK;
2472 dmacr |= cfg->master << XILINX_DMA_DMACR_MASTER_SHIFT;
2473 }
2474
2475 chan->config.frm_cnt_en = cfg->frm_cnt_en;
2476 chan->config.vflip_en = cfg->vflip_en;
2477
2478 if (cfg->park)
2479 chan->config.park_frm = cfg->park_frm;
2480 else
2481 chan->config.park_frm = -1;
2482
2483 chan->config.coalesc = cfg->coalesc;
2484 chan->config.delay = cfg->delay;
2485
2486 if (cfg->coalesc <= XILINX_DMA_DMACR_FRAME_COUNT_MAX) {
2487 dmacr &= ~XILINX_DMA_DMACR_FRAME_COUNT_MASK;
2488 dmacr |= cfg->coalesc << XILINX_DMA_DMACR_FRAME_COUNT_SHIFT;
2489 chan->config.coalesc = cfg->coalesc;
2490 }
2491
2492 if (cfg->delay <= XILINX_DMA_DMACR_DELAY_MAX) {
2493 dmacr &= ~XILINX_DMA_DMACR_DELAY_MASK;
2494 dmacr |= cfg->delay << XILINX_DMA_DMACR_DELAY_SHIFT;
2495 chan->config.delay = cfg->delay;
2496 }
2497
2498 /* FSync Source selection */
2499 dmacr &= ~XILINX_DMA_DMACR_FSYNCSRC_MASK;
2500 dmacr |= cfg->ext_fsync << XILINX_DMA_DMACR_FSYNCSRC_SHIFT;
2501
2502 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, dmacr);
2503
2504 return 0;
2505}
2506EXPORT_SYMBOL(xilinx_vdma_channel_set_config);
2507
2508/* -----------------------------------------------------------------------------
2509 * Probe and remove
2510 */
2511
2512/**
2513 * xilinx_dma_chan_remove - Per Channel remove function
2514 * @chan: Driver specific DMA channel
2515 */
2516static void xilinx_dma_chan_remove(struct xilinx_dma_chan *chan)
2517{
2518 /* Disable all interrupts */
2519 dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
2520 XILINX_DMA_DMAXR_ALL_IRQ_MASK);
2521
2522 if (chan->irq > 0)
2523 free_irq(chan->irq, chan);
2524
2525 tasklet_kill(&chan->tasklet);
2526
2527 list_del(&chan->common.device_node);
2528}
2529
2530static int axidma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
2531 struct clk **tx_clk, struct clk **rx_clk,
2532 struct clk **sg_clk, struct clk **tmp_clk)
2533{
2534 int err;
2535
2536 *tmp_clk = NULL;
2537
2538 *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
2539 if (IS_ERR(*axi_clk)) {
2540 err = PTR_ERR(*axi_clk);
2541 if (err != -EPROBE_DEFER)
2542 dev_err(&pdev->dev, "failed to get axi_aclk (%d)\n",
2543 err);
2544 return err;
2545 }
2546
2547 *tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
2548 if (IS_ERR(*tx_clk))
2549 *tx_clk = NULL;
2550
2551 *rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
2552 if (IS_ERR(*rx_clk))
2553 *rx_clk = NULL;
2554
2555 *sg_clk = devm_clk_get(&pdev->dev, "m_axi_sg_aclk");
2556 if (IS_ERR(*sg_clk))
2557 *sg_clk = NULL;
2558
2559 err = clk_prepare_enable(*axi_clk);
2560 if (err) {
2561 dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
2562 return err;
2563 }
2564
2565 err = clk_prepare_enable(*tx_clk);
2566 if (err) {
2567 dev_err(&pdev->dev, "failed to enable tx_clk (%d)\n", err);
2568 goto err_disable_axiclk;
2569 }
2570
2571 err = clk_prepare_enable(*rx_clk);
2572 if (err) {
2573 dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err);
2574 goto err_disable_txclk;
2575 }
2576
2577 err = clk_prepare_enable(*sg_clk);
2578 if (err) {
2579 dev_err(&pdev->dev, "failed to enable sg_clk (%d)\n", err);
2580 goto err_disable_rxclk;
2581 }
2582
2583 return 0;
2584
2585err_disable_rxclk:
2586 clk_disable_unprepare(*rx_clk);
2587err_disable_txclk:
2588 clk_disable_unprepare(*tx_clk);
2589err_disable_axiclk:
2590 clk_disable_unprepare(*axi_clk);
2591
2592 return err;
2593}
2594
2595static int axicdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
2596 struct clk **dev_clk, struct clk **tmp_clk,
2597 struct clk **tmp1_clk, struct clk **tmp2_clk)
2598{
2599 int err;
2600
2601 *tmp_clk = NULL;
2602 *tmp1_clk = NULL;
2603 *tmp2_clk = NULL;
2604
2605 *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
2606 if (IS_ERR(*axi_clk)) {
2607 err = PTR_ERR(*axi_clk);
2608 if (err != -EPROBE_DEFER)
2609 dev_err(&pdev->dev, "failed to get axi_clk (%d)\n",
2610 err);
2611 return err;
2612 }
2613
2614 *dev_clk = devm_clk_get(&pdev->dev, "m_axi_aclk");
2615 if (IS_ERR(*dev_clk)) {
2616 err = PTR_ERR(*dev_clk);
2617 if (err != -EPROBE_DEFER)
2618 dev_err(&pdev->dev, "failed to get dev_clk (%d)\n",
2619 err);
2620 return err;
2621 }
2622
2623 err = clk_prepare_enable(*axi_clk);
2624 if (err) {
2625 dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
2626 return err;
2627 }
2628
2629 err = clk_prepare_enable(*dev_clk);
2630 if (err) {
2631 dev_err(&pdev->dev, "failed to enable dev_clk (%d)\n", err);
2632 goto err_disable_axiclk;
2633 }
2634
2635 return 0;
2636
2637err_disable_axiclk:
2638 clk_disable_unprepare(*axi_clk);
2639
2640 return err;
2641}
2642
2643static int axivdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
2644 struct clk **tx_clk, struct clk **txs_clk,
2645 struct clk **rx_clk, struct clk **rxs_clk)
2646{
2647 int err;
2648
2649 *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
2650 if (IS_ERR(*axi_clk)) {
2651 err = PTR_ERR(*axi_clk);
2652 if (err != -EPROBE_DEFER)
2653 dev_err(&pdev->dev, "failed to get axi_aclk (%d)\n",
2654 err);
2655 return err;
2656 }
2657
2658 *tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
2659 if (IS_ERR(*tx_clk))
2660 *tx_clk = NULL;
2661
2662 *txs_clk = devm_clk_get(&pdev->dev, "m_axis_mm2s_aclk");
2663 if (IS_ERR(*txs_clk))
2664 *txs_clk = NULL;
2665
2666 *rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
2667 if (IS_ERR(*rx_clk))
2668 *rx_clk = NULL;
2669
2670 *rxs_clk = devm_clk_get(&pdev->dev, "s_axis_s2mm_aclk");
2671 if (IS_ERR(*rxs_clk))
2672 *rxs_clk = NULL;
2673
2674 err = clk_prepare_enable(*axi_clk);
2675 if (err) {
2676 dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n",
2677 err);
2678 return err;
2679 }
2680
2681 err = clk_prepare_enable(*tx_clk);
2682 if (err) {
2683 dev_err(&pdev->dev, "failed to enable tx_clk (%d)\n", err);
2684 goto err_disable_axiclk;
2685 }
2686
2687 err = clk_prepare_enable(*txs_clk);
2688 if (err) {
2689 dev_err(&pdev->dev, "failed to enable txs_clk (%d)\n", err);
2690 goto err_disable_txclk;
2691 }
2692
2693 err = clk_prepare_enable(*rx_clk);
2694 if (err) {
2695 dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err);
2696 goto err_disable_txsclk;
2697 }
2698
2699 err = clk_prepare_enable(*rxs_clk);
2700 if (err) {
2701 dev_err(&pdev->dev, "failed to enable rxs_clk (%d)\n", err);
2702 goto err_disable_rxclk;
2703 }
2704
2705 return 0;
2706
2707err_disable_rxclk:
2708 clk_disable_unprepare(*rx_clk);
2709err_disable_txsclk:
2710 clk_disable_unprepare(*txs_clk);
2711err_disable_txclk:
2712 clk_disable_unprepare(*tx_clk);
2713err_disable_axiclk:
2714 clk_disable_unprepare(*axi_clk);
2715
2716 return err;
2717}
2718
2719static void xdma_disable_allclks(struct xilinx_dma_device *xdev)
2720{
2721 clk_disable_unprepare(xdev->rxs_clk);
2722 clk_disable_unprepare(xdev->rx_clk);
2723 clk_disable_unprepare(xdev->txs_clk);
2724 clk_disable_unprepare(xdev->tx_clk);
2725 clk_disable_unprepare(xdev->axi_clk);
2726}
2727
2728/**
2729 * xilinx_dma_chan_probe - Per Channel Probing
2730 * It get channel features from the device tree entry and
2731 * initialize special channel handling routines
2732 *
2733 * @xdev: Driver specific device structure
2734 * @node: Device node
2735 *
2736 * Return: '0' on success and failure value on error
2737 */
2738static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
2739 struct device_node *node)
2740{
2741 struct xilinx_dma_chan *chan;
2742 bool has_dre = false;
2743 u32 value, width;
2744 int err;
2745
2746 /* Allocate and initialize the channel structure */
2747 chan = devm_kzalloc(xdev->dev, sizeof(*chan), GFP_KERNEL);
2748 if (!chan)
2749 return -ENOMEM;
2750
2751 chan->dev = xdev->dev;
2752 chan->xdev = xdev;
2753 chan->desc_pendingcount = 0x0;
2754 chan->ext_addr = xdev->ext_addr;
2755 /* This variable ensures that descriptors are not
2756 * Submitted when dma engine is in progress. This variable is
2757 * Added to avoid polling for a bit in the status register to
2758 * Know dma state in the driver hot path.
2759 */
2760 chan->idle = true;
2761
2762 spin_lock_init(&chan->lock);
2763 INIT_LIST_HEAD(&chan->pending_list);
2764 INIT_LIST_HEAD(&chan->done_list);
2765 INIT_LIST_HEAD(&chan->active_list);
2766 INIT_LIST_HEAD(&chan->free_seg_list);
2767
2768 /* Retrieve the channel properties from the device tree */
2769 has_dre = of_property_read_bool(node, "xlnx,include-dre");
2770
2771 chan->genlock = of_property_read_bool(node, "xlnx,genlock-mode");
2772
2773 err = of_property_read_u32(node, "xlnx,datawidth", &value);
2774 if (err) {
2775 dev_err(xdev->dev, "missing xlnx,datawidth property\n");
2776 return err;
2777 }
2778 width = value >> 3; /* Convert bits to bytes */
2779
2780 /* If data width is greater than 8 bytes, DRE is not in hw */
2781 if (width > 8)
2782 has_dre = false;
2783
2784 if (!has_dre)
2785 xdev->common.copy_align = fls(width - 1);
2786
2787 if (of_device_is_compatible(node, "xlnx,axi-vdma-mm2s-channel") ||
2788 of_device_is_compatible(node, "xlnx,axi-dma-mm2s-channel") ||
2789 of_device_is_compatible(node, "xlnx,axi-cdma-channel")) {
2790 chan->direction = DMA_MEM_TO_DEV;
2791 chan->id = xdev->mm2s_chan_id++;
2792 chan->tdest = chan->id;
2793
2794 chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
2795 if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
2796 chan->desc_offset = XILINX_VDMA_MM2S_DESC_OFFSET;
2797 chan->config.park = 1;
2798
2799 if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
2800 xdev->flush_on_fsync == XILINX_DMA_FLUSH_MM2S)
2801 chan->flush_on_fsync = true;
2802 }
2803 } else if (of_device_is_compatible(node,
2804 "xlnx,axi-vdma-s2mm-channel") ||
2805 of_device_is_compatible(node,
2806 "xlnx,axi-dma-s2mm-channel")) {
2807 chan->direction = DMA_DEV_TO_MEM;
2808 chan->id = xdev->s2mm_chan_id++;
2809 chan->tdest = chan->id - xdev->dma_config->max_channels / 2;
2810 chan->has_vflip = of_property_read_bool(node,
2811 "xlnx,enable-vert-flip");
2812 if (chan->has_vflip) {
2813 chan->config.vflip_en = dma_read(chan,
2814 XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP) &
2815 XILINX_VDMA_ENABLE_VERTICAL_FLIP;
2816 }
2817
2818 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA)
2819 chan->ctrl_offset = XILINX_MCDMA_S2MM_CTRL_OFFSET;
2820 else
2821 chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
2822
2823 if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
2824 chan->desc_offset = XILINX_VDMA_S2MM_DESC_OFFSET;
2825 chan->config.park = 1;
2826
2827 if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
2828 xdev->flush_on_fsync == XILINX_DMA_FLUSH_S2MM)
2829 chan->flush_on_fsync = true;
2830 }
2831 } else {
2832 dev_err(xdev->dev, "Invalid channel compatible node\n");
2833 return -EINVAL;
2834 }
2835
2836 /* Request the interrupt */
2837 chan->irq = irq_of_parse_and_map(node, chan->tdest);
2838 err = request_irq(chan->irq, xdev->dma_config->irq_handler,
2839 IRQF_SHARED, "xilinx-dma-controller", chan);
2840 if (err) {
2841 dev_err(xdev->dev, "unable to request IRQ %d\n", chan->irq);
2842 return err;
2843 }
2844
2845 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
2846 chan->start_transfer = xilinx_dma_start_transfer;
2847 chan->stop_transfer = xilinx_dma_stop_transfer;
2848 } else if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
2849 chan->start_transfer = xilinx_mcdma_start_transfer;
2850 chan->stop_transfer = xilinx_dma_stop_transfer;
2851 } else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
2852 chan->start_transfer = xilinx_cdma_start_transfer;
2853 chan->stop_transfer = xilinx_cdma_stop_transfer;
2854 } else {
2855 chan->start_transfer = xilinx_vdma_start_transfer;
2856 chan->stop_transfer = xilinx_dma_stop_transfer;
2857 }
2858
2859 /* check if SG is enabled (only for AXIDMA and CDMA) */
2860 if (xdev->dma_config->dmatype != XDMA_TYPE_VDMA) {
2861 if (dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
2862 XILINX_DMA_DMASR_SG_MASK)
2863 chan->has_sg = true;
2864 dev_dbg(chan->dev, "ch %d: SG %s\n", chan->id,
2865 chan->has_sg ? "enabled" : "disabled");
2866 }
2867
2868 /* Initialize the tasklet */
2869 tasklet_init(&chan->tasklet, xilinx_dma_do_tasklet,
2870 (unsigned long)chan);
2871
2872 /*
2873 * Initialize the DMA channel and add it to the DMA engine channels
2874 * list.
2875 */
2876 chan->common.device = &xdev->common;
2877
2878 list_add_tail(&chan->common.device_node, &xdev->common.channels);
2879 xdev->chan[chan->id] = chan;
2880
2881 /* Reset the channel */
2882 err = xilinx_dma_chan_reset(chan);
2883 if (err < 0) {
2884 dev_err(xdev->dev, "Reset channel failed\n");
2885 return err;
2886 }
2887
2888 return 0;
2889}
2890
2891/**
2892 * xilinx_dma_child_probe - Per child node probe
2893 * It get number of dma-channels per child node from
2894 * device-tree and initializes all the channels.
2895 *
2896 * @xdev: Driver specific device structure
2897 * @node: Device node
2898 *
2899 * Return: 0 always.
2900 */
2901static int xilinx_dma_child_probe(struct xilinx_dma_device *xdev,
2902 struct device_node *node)
2903{
2904 int ret, i, nr_channels = 1;
2905
2906 ret = of_property_read_u32(node, "dma-channels", &nr_channels);
2907 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA && ret < 0)
2908 dev_warn(xdev->dev, "missing dma-channels property\n");
2909
2910 for (i = 0; i < nr_channels; i++)
2911 xilinx_dma_chan_probe(xdev, node);
2912
2913 return 0;
2914}
2915
2916/**
2917 * of_dma_xilinx_xlate - Translation function
2918 * @dma_spec: Pointer to DMA specifier as found in the device tree
2919 * @ofdma: Pointer to DMA controller data
2920 *
2921 * Return: DMA channel pointer on success and NULL on error
2922 */
2923static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
2924 struct of_dma *ofdma)
2925{
2926 struct xilinx_dma_device *xdev = ofdma->of_dma_data;
2927 int chan_id = dma_spec->args[0];
2928
2929 if (chan_id >= xdev->dma_config->max_channels || !xdev->chan[chan_id])
2930 return NULL;
2931
2932 return dma_get_slave_channel(&xdev->chan[chan_id]->common);
2933}
2934
2935static const struct xilinx_dma_config axidma_config = {
2936 .dmatype = XDMA_TYPE_AXIDMA,
2937 .clk_init = axidma_clk_init,
2938 .irq_handler = xilinx_dma_irq_handler,
2939 .max_channels = XILINX_DMA_MAX_CHANS_PER_DEVICE,
2940};
2941
2942static const struct xilinx_dma_config aximcdma_config = {
2943 .dmatype = XDMA_TYPE_AXIMCDMA,
2944 .clk_init = axidma_clk_init,
2945 .irq_handler = xilinx_mcdma_irq_handler,
2946 .max_channels = XILINX_MCDMA_MAX_CHANS_PER_DEVICE,
2947};
2948static const struct xilinx_dma_config axicdma_config = {
2949 .dmatype = XDMA_TYPE_CDMA,
2950 .clk_init = axicdma_clk_init,
2951 .irq_handler = xilinx_dma_irq_handler,
2952 .max_channels = XILINX_CDMA_MAX_CHANS_PER_DEVICE,
2953};
2954
2955static const struct xilinx_dma_config axivdma_config = {
2956 .dmatype = XDMA_TYPE_VDMA,
2957 .clk_init = axivdma_clk_init,
2958 .irq_handler = xilinx_dma_irq_handler,
2959 .max_channels = XILINX_DMA_MAX_CHANS_PER_DEVICE,
2960};
2961
2962static const struct of_device_id xilinx_dma_of_ids[] = {
2963 { .compatible = "xlnx,axi-dma-1.00.a", .data = &axidma_config },
2964 { .compatible = "xlnx,axi-cdma-1.00.a", .data = &axicdma_config },
2965 { .compatible = "xlnx,axi-vdma-1.00.a", .data = &axivdma_config },
2966 { .compatible = "xlnx,axi-mcdma-1.00.a", .data = &aximcdma_config },
2967 {}
2968};
2969MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids);
2970
2971/**
2972 * xilinx_dma_probe - Driver probe function
2973 * @pdev: Pointer to the platform_device structure
2974 *
2975 * Return: '0' on success and failure value on error
2976 */
2977static int xilinx_dma_probe(struct platform_device *pdev)
2978{
2979 int (*clk_init)(struct platform_device *, struct clk **, struct clk **,
2980 struct clk **, struct clk **, struct clk **)
2981 = axivdma_clk_init;
2982 struct device_node *node = pdev->dev.of_node;
2983 struct xilinx_dma_device *xdev;
2984 struct device_node *child, *np = pdev->dev.of_node;
2985 u32 num_frames, addr_width, len_width;
2986 int i, err;
2987
2988 /* Allocate and initialize the DMA engine structure */
2989 xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL);
2990 if (!xdev)
2991 return -ENOMEM;
2992
2993 xdev->dev = &pdev->dev;
2994 if (np) {
2995 const struct of_device_id *match;
2996
2997 match = of_match_node(xilinx_dma_of_ids, np);
2998 if (match && match->data) {
2999 xdev->dma_config = match->data;
3000 clk_init = xdev->dma_config->clk_init;
3001 }
3002 }
3003
3004 err = clk_init(pdev, &xdev->axi_clk, &xdev->tx_clk, &xdev->txs_clk,
3005 &xdev->rx_clk, &xdev->rxs_clk);
3006 if (err)
3007 return err;
3008
3009 /* Request and map I/O memory */
3010 xdev->regs = devm_platform_ioremap_resource(pdev, 0);
3011 if (IS_ERR(xdev->regs))
3012 return PTR_ERR(xdev->regs);
3013
3014 /* Retrieve the DMA engine properties from the device tree */
3015 xdev->max_buffer_len = GENMASK(XILINX_DMA_MAX_TRANS_LEN_MAX - 1, 0);
3016 xdev->s2mm_chan_id = xdev->dma_config->max_channels / 2;
3017
3018 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA ||
3019 xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
3020 if (!of_property_read_u32(node, "xlnx,sg-length-width",
3021 &len_width)) {
3022 if (len_width < XILINX_DMA_MAX_TRANS_LEN_MIN ||
3023 len_width > XILINX_DMA_V2_MAX_TRANS_LEN_MAX) {
3024 dev_warn(xdev->dev,
3025 "invalid xlnx,sg-length-width property value. Using default width\n");
3026 } else {
3027 if (len_width > XILINX_DMA_MAX_TRANS_LEN_MAX)
3028 dev_warn(xdev->dev, "Please ensure that IP supports buffer length > 23 bits\n");
3029 xdev->max_buffer_len =
3030 GENMASK(len_width - 1, 0);
3031 }
3032 }
3033 }
3034
3035 if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
3036 err = of_property_read_u32(node, "xlnx,num-fstores",
3037 &num_frames);
3038 if (err < 0) {
3039 dev_err(xdev->dev,
3040 "missing xlnx,num-fstores property\n");
3041 return err;
3042 }
3043
3044 err = of_property_read_u32(node, "xlnx,flush-fsync",
3045 &xdev->flush_on_fsync);
3046 if (err < 0)
3047 dev_warn(xdev->dev,
3048 "missing xlnx,flush-fsync property\n");
3049 }
3050
3051 err = of_property_read_u32(node, "xlnx,addrwidth", &addr_width);
3052 if (err < 0)
3053 dev_warn(xdev->dev, "missing xlnx,addrwidth property\n");
3054
3055 if (addr_width > 32)
3056 xdev->ext_addr = true;
3057 else
3058 xdev->ext_addr = false;
3059
3060 /* Set the dma mask bits */
3061 dma_set_mask(xdev->dev, DMA_BIT_MASK(addr_width));
3062
3063 /* Initialize the DMA engine */
3064 xdev->common.dev = &pdev->dev;
3065
3066 INIT_LIST_HEAD(&xdev->common.channels);
3067 if (!(xdev->dma_config->dmatype == XDMA_TYPE_CDMA)) {
3068 dma_cap_set(DMA_SLAVE, xdev->common.cap_mask);
3069 dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask);
3070 }
3071
3072 xdev->common.device_alloc_chan_resources =
3073 xilinx_dma_alloc_chan_resources;
3074 xdev->common.device_free_chan_resources =
3075 xilinx_dma_free_chan_resources;
3076 xdev->common.device_terminate_all = xilinx_dma_terminate_all;
3077 xdev->common.device_tx_status = xilinx_dma_tx_status;
3078 xdev->common.device_issue_pending = xilinx_dma_issue_pending;
3079 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
3080 dma_cap_set(DMA_CYCLIC, xdev->common.cap_mask);
3081 xdev->common.device_prep_slave_sg = xilinx_dma_prep_slave_sg;
3082 xdev->common.device_prep_dma_cyclic =
3083 xilinx_dma_prep_dma_cyclic;
3084 /* Residue calculation is supported by only AXI DMA and CDMA */
3085 xdev->common.residue_granularity =
3086 DMA_RESIDUE_GRANULARITY_SEGMENT;
3087 } else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
3088 dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
3089 xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
3090 /* Residue calculation is supported by only AXI DMA and CDMA */
3091 xdev->common.residue_granularity =
3092 DMA_RESIDUE_GRANULARITY_SEGMENT;
3093 } else if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
3094 xdev->common.device_prep_slave_sg = xilinx_mcdma_prep_slave_sg;
3095 } else {
3096 xdev->common.device_prep_interleaved_dma =
3097 xilinx_vdma_dma_prep_interleaved;
3098 }
3099
3100 platform_set_drvdata(pdev, xdev);
3101
3102 /* Initialize the channels */
3103 for_each_child_of_node(node, child) {
3104 err = xilinx_dma_child_probe(xdev, child);
3105 if (err < 0)
3106 goto disable_clks;
3107 }
3108
3109 if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
3110 for (i = 0; i < xdev->dma_config->max_channels; i++)
3111 if (xdev->chan[i])
3112 xdev->chan[i]->num_frms = num_frames;
3113 }
3114
3115 /* Register the DMA engine with the core */
3116 dma_async_device_register(&xdev->common);
3117
3118 err = of_dma_controller_register(node, of_dma_xilinx_xlate,
3119 xdev);
3120 if (err < 0) {
3121 dev_err(&pdev->dev, "Unable to register DMA to DT\n");
3122 dma_async_device_unregister(&xdev->common);
3123 goto error;
3124 }
3125
3126 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
3127 dev_info(&pdev->dev, "Xilinx AXI DMA Engine Driver Probed!!\n");
3128 else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA)
3129 dev_info(&pdev->dev, "Xilinx AXI CDMA Engine Driver Probed!!\n");
3130 else if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA)
3131 dev_info(&pdev->dev, "Xilinx AXI MCDMA Engine Driver Probed!!\n");
3132 else
3133 dev_info(&pdev->dev, "Xilinx AXI VDMA Engine Driver Probed!!\n");
3134
3135 return 0;
3136
3137disable_clks:
3138 xdma_disable_allclks(xdev);
3139error:
3140 for (i = 0; i < xdev->dma_config->max_channels; i++)
3141 if (xdev->chan[i])
3142 xilinx_dma_chan_remove(xdev->chan[i]);
3143
3144 return err;
3145}
3146
3147/**
3148 * xilinx_dma_remove - Driver remove function
3149 * @pdev: Pointer to the platform_device structure
3150 *
3151 * Return: Always '0'
3152 */
3153static int xilinx_dma_remove(struct platform_device *pdev)
3154{
3155 struct xilinx_dma_device *xdev = platform_get_drvdata(pdev);
3156 int i;
3157
3158 of_dma_controller_free(pdev->dev.of_node);
3159
3160 dma_async_device_unregister(&xdev->common);
3161
3162 for (i = 0; i < xdev->dma_config->max_channels; i++)
3163 if (xdev->chan[i])
3164 xilinx_dma_chan_remove(xdev->chan[i]);
3165
3166 xdma_disable_allclks(xdev);
3167
3168 return 0;
3169}
3170
3171static struct platform_driver xilinx_vdma_driver = {
3172 .driver = {
3173 .name = "xilinx-vdma",
3174 .of_match_table = xilinx_dma_of_ids,
3175 },
3176 .probe = xilinx_dma_probe,
3177 .remove = xilinx_dma_remove,
3178};
3179
3180module_platform_driver(xilinx_vdma_driver);
3181
3182MODULE_AUTHOR("Xilinx, Inc.");
3183MODULE_DESCRIPTION("Xilinx VDMA driver");
3184MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * DMA driver for Xilinx Video DMA Engine
4 *
5 * Copyright (C) 2010-2014 Xilinx, Inc. All rights reserved.
6 *
7 * Based on the Freescale DMA driver.
8 *
9 * Description:
10 * The AXI Video Direct Memory Access (AXI VDMA) core is a soft Xilinx IP
11 * core that provides high-bandwidth direct memory access between memory
12 * and AXI4-Stream type video target peripherals. The core provides efficient
13 * two dimensional DMA operations with independent asynchronous read (S2MM)
14 * and write (MM2S) channel operation. It can be configured to have either
15 * one channel or two channels. If configured as two channels, one is to
16 * transmit to the video device (MM2S) and another is to receive from the
17 * video device (S2MM). Initialization, status, interrupt and management
18 * registers are accessed through an AXI4-Lite slave interface.
19 *
20 * The AXI Direct Memory Access (AXI DMA) core is a soft Xilinx IP core that
21 * provides high-bandwidth one dimensional direct memory access between memory
22 * and AXI4-Stream target peripherals. It supports one receive and one
23 * transmit channel, both of them optional at synthesis time.
24 *
25 * The AXI CDMA, is a soft IP, which provides high-bandwidth Direct Memory
26 * Access (DMA) between a memory-mapped source address and a memory-mapped
27 * destination address.
28 *
29 * The AXI Multichannel Direct Memory Access (AXI MCDMA) core is a soft
30 * Xilinx IP that provides high-bandwidth direct memory access between
31 * memory and AXI4-Stream target peripherals. It provides scatter gather
32 * (SG) interface with multiple channels independent configuration support.
33 *
34 */
35
36#include <linux/bitops.h>
37#include <linux/dmapool.h>
38#include <linux/dma/xilinx_dma.h>
39#include <linux/init.h>
40#include <linux/interrupt.h>
41#include <linux/io.h>
42#include <linux/iopoll.h>
43#include <linux/module.h>
44#include <linux/of_address.h>
45#include <linux/of_dma.h>
46#include <linux/of_platform.h>
47#include <linux/of_irq.h>
48#include <linux/slab.h>
49#include <linux/clk.h>
50#include <linux/io-64-nonatomic-lo-hi.h>
51
52#include "../dmaengine.h"
53
54/* Register/Descriptor Offsets */
55#define XILINX_DMA_MM2S_CTRL_OFFSET 0x0000
56#define XILINX_DMA_S2MM_CTRL_OFFSET 0x0030
57#define XILINX_VDMA_MM2S_DESC_OFFSET 0x0050
58#define XILINX_VDMA_S2MM_DESC_OFFSET 0x00a0
59
60/* Control Registers */
61#define XILINX_DMA_REG_DMACR 0x0000
62#define XILINX_DMA_DMACR_DELAY_MAX 0xff
63#define XILINX_DMA_DMACR_DELAY_SHIFT 24
64#define XILINX_DMA_DMACR_FRAME_COUNT_MAX 0xff
65#define XILINX_DMA_DMACR_FRAME_COUNT_SHIFT 16
66#define XILINX_DMA_DMACR_ERR_IRQ BIT(14)
67#define XILINX_DMA_DMACR_DLY_CNT_IRQ BIT(13)
68#define XILINX_DMA_DMACR_FRM_CNT_IRQ BIT(12)
69#define XILINX_DMA_DMACR_MASTER_SHIFT 8
70#define XILINX_DMA_DMACR_FSYNCSRC_SHIFT 5
71#define XILINX_DMA_DMACR_FRAMECNT_EN BIT(4)
72#define XILINX_DMA_DMACR_GENLOCK_EN BIT(3)
73#define XILINX_DMA_DMACR_RESET BIT(2)
74#define XILINX_DMA_DMACR_CIRC_EN BIT(1)
75#define XILINX_DMA_DMACR_RUNSTOP BIT(0)
76#define XILINX_DMA_DMACR_FSYNCSRC_MASK GENMASK(6, 5)
77#define XILINX_DMA_DMACR_DELAY_MASK GENMASK(31, 24)
78#define XILINX_DMA_DMACR_FRAME_COUNT_MASK GENMASK(23, 16)
79#define XILINX_DMA_DMACR_MASTER_MASK GENMASK(11, 8)
80
81#define XILINX_DMA_REG_DMASR 0x0004
82#define XILINX_DMA_DMASR_EOL_LATE_ERR BIT(15)
83#define XILINX_DMA_DMASR_ERR_IRQ BIT(14)
84#define XILINX_DMA_DMASR_DLY_CNT_IRQ BIT(13)
85#define XILINX_DMA_DMASR_FRM_CNT_IRQ BIT(12)
86#define XILINX_DMA_DMASR_SOF_LATE_ERR BIT(11)
87#define XILINX_DMA_DMASR_SG_DEC_ERR BIT(10)
88#define XILINX_DMA_DMASR_SG_SLV_ERR BIT(9)
89#define XILINX_DMA_DMASR_EOF_EARLY_ERR BIT(8)
90#define XILINX_DMA_DMASR_SOF_EARLY_ERR BIT(7)
91#define XILINX_DMA_DMASR_DMA_DEC_ERR BIT(6)
92#define XILINX_DMA_DMASR_DMA_SLAVE_ERR BIT(5)
93#define XILINX_DMA_DMASR_DMA_INT_ERR BIT(4)
94#define XILINX_DMA_DMASR_SG_MASK BIT(3)
95#define XILINX_DMA_DMASR_IDLE BIT(1)
96#define XILINX_DMA_DMASR_HALTED BIT(0)
97#define XILINX_DMA_DMASR_DELAY_MASK GENMASK(31, 24)
98#define XILINX_DMA_DMASR_FRAME_COUNT_MASK GENMASK(23, 16)
99
100#define XILINX_DMA_REG_CURDESC 0x0008
101#define XILINX_DMA_REG_TAILDESC 0x0010
102#define XILINX_DMA_REG_REG_INDEX 0x0014
103#define XILINX_DMA_REG_FRMSTORE 0x0018
104#define XILINX_DMA_REG_THRESHOLD 0x001c
105#define XILINX_DMA_REG_FRMPTR_STS 0x0024
106#define XILINX_DMA_REG_PARK_PTR 0x0028
107#define XILINX_DMA_PARK_PTR_WR_REF_SHIFT 8
108#define XILINX_DMA_PARK_PTR_WR_REF_MASK GENMASK(12, 8)
109#define XILINX_DMA_PARK_PTR_RD_REF_SHIFT 0
110#define XILINX_DMA_PARK_PTR_RD_REF_MASK GENMASK(4, 0)
111#define XILINX_DMA_REG_VDMA_VERSION 0x002c
112
113/* Register Direct Mode Registers */
114#define XILINX_DMA_REG_VSIZE 0x0000
115#define XILINX_DMA_REG_HSIZE 0x0004
116
117#define XILINX_DMA_REG_FRMDLY_STRIDE 0x0008
118#define XILINX_DMA_FRMDLY_STRIDE_FRMDLY_SHIFT 24
119#define XILINX_DMA_FRMDLY_STRIDE_STRIDE_SHIFT 0
120
121#define XILINX_VDMA_REG_START_ADDRESS(n) (0x000c + 4 * (n))
122#define XILINX_VDMA_REG_START_ADDRESS_64(n) (0x000c + 8 * (n))
123
124#define XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP 0x00ec
125#define XILINX_VDMA_ENABLE_VERTICAL_FLIP BIT(0)
126
127/* HW specific definitions */
128#define XILINX_MCDMA_MAX_CHANS_PER_DEVICE 0x20
129#define XILINX_DMA_MAX_CHANS_PER_DEVICE 0x2
130#define XILINX_CDMA_MAX_CHANS_PER_DEVICE 0x1
131
132#define XILINX_DMA_DMAXR_ALL_IRQ_MASK \
133 (XILINX_DMA_DMASR_FRM_CNT_IRQ | \
134 XILINX_DMA_DMASR_DLY_CNT_IRQ | \
135 XILINX_DMA_DMASR_ERR_IRQ)
136
137#define XILINX_DMA_DMASR_ALL_ERR_MASK \
138 (XILINX_DMA_DMASR_EOL_LATE_ERR | \
139 XILINX_DMA_DMASR_SOF_LATE_ERR | \
140 XILINX_DMA_DMASR_SG_DEC_ERR | \
141 XILINX_DMA_DMASR_SG_SLV_ERR | \
142 XILINX_DMA_DMASR_EOF_EARLY_ERR | \
143 XILINX_DMA_DMASR_SOF_EARLY_ERR | \
144 XILINX_DMA_DMASR_DMA_DEC_ERR | \
145 XILINX_DMA_DMASR_DMA_SLAVE_ERR | \
146 XILINX_DMA_DMASR_DMA_INT_ERR)
147
148/*
149 * Recoverable errors are DMA Internal error, SOF Early, EOF Early
150 * and SOF Late. They are only recoverable when C_FLUSH_ON_FSYNC
151 * is enabled in the h/w system.
152 */
153#define XILINX_DMA_DMASR_ERR_RECOVER_MASK \
154 (XILINX_DMA_DMASR_SOF_LATE_ERR | \
155 XILINX_DMA_DMASR_EOF_EARLY_ERR | \
156 XILINX_DMA_DMASR_SOF_EARLY_ERR | \
157 XILINX_DMA_DMASR_DMA_INT_ERR)
158
159/* Axi VDMA Flush on Fsync bits */
160#define XILINX_DMA_FLUSH_S2MM 3
161#define XILINX_DMA_FLUSH_MM2S 2
162#define XILINX_DMA_FLUSH_BOTH 1
163
164/* Delay loop counter to prevent hardware failure */
165#define XILINX_DMA_LOOP_COUNT 1000000
166
167/* AXI DMA Specific Registers/Offsets */
168#define XILINX_DMA_REG_SRCDSTADDR 0x18
169#define XILINX_DMA_REG_BTT 0x28
170
171/* AXI DMA Specific Masks/Bit fields */
172#define XILINX_DMA_MAX_TRANS_LEN_MIN 8
173#define XILINX_DMA_MAX_TRANS_LEN_MAX 23
174#define XILINX_DMA_V2_MAX_TRANS_LEN_MAX 26
175#define XILINX_DMA_CR_COALESCE_MAX GENMASK(23, 16)
176#define XILINX_DMA_CR_CYCLIC_BD_EN_MASK BIT(4)
177#define XILINX_DMA_CR_COALESCE_SHIFT 16
178#define XILINX_DMA_BD_SOP BIT(27)
179#define XILINX_DMA_BD_EOP BIT(26)
180#define XILINX_DMA_COALESCE_MAX 255
181#define XILINX_DMA_NUM_DESCS 255
182#define XILINX_DMA_NUM_APP_WORDS 5
183
184/* AXI CDMA Specific Registers/Offsets */
185#define XILINX_CDMA_REG_SRCADDR 0x18
186#define XILINX_CDMA_REG_DSTADDR 0x20
187
188/* AXI CDMA Specific Masks */
189#define XILINX_CDMA_CR_SGMODE BIT(3)
190
191#define xilinx_prep_dma_addr_t(addr) \
192 ((dma_addr_t)((u64)addr##_##msb << 32 | (addr)))
193
194/* AXI MCDMA Specific Registers/Offsets */
195#define XILINX_MCDMA_MM2S_CTRL_OFFSET 0x0000
196#define XILINX_MCDMA_S2MM_CTRL_OFFSET 0x0500
197#define XILINX_MCDMA_CHEN_OFFSET 0x0008
198#define XILINX_MCDMA_CH_ERR_OFFSET 0x0010
199#define XILINX_MCDMA_RXINT_SER_OFFSET 0x0020
200#define XILINX_MCDMA_TXINT_SER_OFFSET 0x0028
201#define XILINX_MCDMA_CHAN_CR_OFFSET(x) (0x40 + (x) * 0x40)
202#define XILINX_MCDMA_CHAN_SR_OFFSET(x) (0x44 + (x) * 0x40)
203#define XILINX_MCDMA_CHAN_CDESC_OFFSET(x) (0x48 + (x) * 0x40)
204#define XILINX_MCDMA_CHAN_TDESC_OFFSET(x) (0x50 + (x) * 0x40)
205
206/* AXI MCDMA Specific Masks/Shifts */
207#define XILINX_MCDMA_COALESCE_SHIFT 16
208#define XILINX_MCDMA_COALESCE_MAX 24
209#define XILINX_MCDMA_IRQ_ALL_MASK GENMASK(7, 5)
210#define XILINX_MCDMA_COALESCE_MASK GENMASK(23, 16)
211#define XILINX_MCDMA_CR_RUNSTOP_MASK BIT(0)
212#define XILINX_MCDMA_IRQ_IOC_MASK BIT(5)
213#define XILINX_MCDMA_IRQ_DELAY_MASK BIT(6)
214#define XILINX_MCDMA_IRQ_ERR_MASK BIT(7)
215#define XILINX_MCDMA_BD_EOP BIT(30)
216#define XILINX_MCDMA_BD_SOP BIT(31)
217
218/**
219 * struct xilinx_vdma_desc_hw - Hardware Descriptor
220 * @next_desc: Next Descriptor Pointer @0x00
221 * @pad1: Reserved @0x04
222 * @buf_addr: Buffer address @0x08
223 * @buf_addr_msb: MSB of Buffer address @0x0C
224 * @vsize: Vertical Size @0x10
225 * @hsize: Horizontal Size @0x14
226 * @stride: Number of bytes between the first
227 * pixels of each horizontal line @0x18
228 */
229struct xilinx_vdma_desc_hw {
230 u32 next_desc;
231 u32 pad1;
232 u32 buf_addr;
233 u32 buf_addr_msb;
234 u32 vsize;
235 u32 hsize;
236 u32 stride;
237} __aligned(64);
238
239/**
240 * struct xilinx_axidma_desc_hw - Hardware Descriptor for AXI DMA
241 * @next_desc: Next Descriptor Pointer @0x00
242 * @next_desc_msb: MSB of Next Descriptor Pointer @0x04
243 * @buf_addr: Buffer address @0x08
244 * @buf_addr_msb: MSB of Buffer address @0x0C
245 * @reserved1: Reserved @0x10
246 * @reserved2: Reserved @0x14
247 * @control: Control field @0x18
248 * @status: Status field @0x1C
249 * @app: APP Fields @0x20 - 0x30
250 */
251struct xilinx_axidma_desc_hw {
252 u32 next_desc;
253 u32 next_desc_msb;
254 u32 buf_addr;
255 u32 buf_addr_msb;
256 u32 reserved1;
257 u32 reserved2;
258 u32 control;
259 u32 status;
260 u32 app[XILINX_DMA_NUM_APP_WORDS];
261} __aligned(64);
262
263/**
264 * struct xilinx_aximcdma_desc_hw - Hardware Descriptor for AXI MCDMA
265 * @next_desc: Next Descriptor Pointer @0x00
266 * @next_desc_msb: MSB of Next Descriptor Pointer @0x04
267 * @buf_addr: Buffer address @0x08
268 * @buf_addr_msb: MSB of Buffer address @0x0C
269 * @rsvd: Reserved field @0x10
270 * @control: Control Information field @0x14
271 * @status: Status field @0x18
272 * @sideband_status: Status of sideband signals @0x1C
273 * @app: APP Fields @0x20 - 0x30
274 */
275struct xilinx_aximcdma_desc_hw {
276 u32 next_desc;
277 u32 next_desc_msb;
278 u32 buf_addr;
279 u32 buf_addr_msb;
280 u32 rsvd;
281 u32 control;
282 u32 status;
283 u32 sideband_status;
284 u32 app[XILINX_DMA_NUM_APP_WORDS];
285} __aligned(64);
286
287/**
288 * struct xilinx_cdma_desc_hw - Hardware Descriptor
289 * @next_desc: Next Descriptor Pointer @0x00
290 * @next_desc_msb: Next Descriptor Pointer MSB @0x04
291 * @src_addr: Source address @0x08
292 * @src_addr_msb: Source address MSB @0x0C
293 * @dest_addr: Destination address @0x10
294 * @dest_addr_msb: Destination address MSB @0x14
295 * @control: Control field @0x18
296 * @status: Status field @0x1C
297 */
298struct xilinx_cdma_desc_hw {
299 u32 next_desc;
300 u32 next_desc_msb;
301 u32 src_addr;
302 u32 src_addr_msb;
303 u32 dest_addr;
304 u32 dest_addr_msb;
305 u32 control;
306 u32 status;
307} __aligned(64);
308
309/**
310 * struct xilinx_vdma_tx_segment - Descriptor segment
311 * @hw: Hardware descriptor
312 * @node: Node in the descriptor segments list
313 * @phys: Physical address of segment
314 */
315struct xilinx_vdma_tx_segment {
316 struct xilinx_vdma_desc_hw hw;
317 struct list_head node;
318 dma_addr_t phys;
319} __aligned(64);
320
321/**
322 * struct xilinx_axidma_tx_segment - Descriptor segment
323 * @hw: Hardware descriptor
324 * @node: Node in the descriptor segments list
325 * @phys: Physical address of segment
326 */
327struct xilinx_axidma_tx_segment {
328 struct xilinx_axidma_desc_hw hw;
329 struct list_head node;
330 dma_addr_t phys;
331} __aligned(64);
332
333/**
334 * struct xilinx_aximcdma_tx_segment - Descriptor segment
335 * @hw: Hardware descriptor
336 * @node: Node in the descriptor segments list
337 * @phys: Physical address of segment
338 */
339struct xilinx_aximcdma_tx_segment {
340 struct xilinx_aximcdma_desc_hw hw;
341 struct list_head node;
342 dma_addr_t phys;
343} __aligned(64);
344
345/**
346 * struct xilinx_cdma_tx_segment - Descriptor segment
347 * @hw: Hardware descriptor
348 * @node: Node in the descriptor segments list
349 * @phys: Physical address of segment
350 */
351struct xilinx_cdma_tx_segment {
352 struct xilinx_cdma_desc_hw hw;
353 struct list_head node;
354 dma_addr_t phys;
355} __aligned(64);
356
357/**
358 * struct xilinx_dma_tx_descriptor - Per Transaction structure
359 * @async_tx: Async transaction descriptor
360 * @segments: TX segments list
361 * @node: Node in the channel descriptors list
362 * @cyclic: Check for cyclic transfers.
363 * @err: Whether the descriptor has an error.
364 * @residue: Residue of the completed descriptor
365 */
366struct xilinx_dma_tx_descriptor {
367 struct dma_async_tx_descriptor async_tx;
368 struct list_head segments;
369 struct list_head node;
370 bool cyclic;
371 bool err;
372 u32 residue;
373};
374
375/**
376 * struct xilinx_dma_chan - Driver specific DMA channel structure
377 * @xdev: Driver specific device structure
378 * @ctrl_offset: Control registers offset
379 * @desc_offset: TX descriptor registers offset
380 * @lock: Descriptor operation lock
381 * @pending_list: Descriptors waiting
382 * @active_list: Descriptors ready to submit
383 * @done_list: Complete descriptors
384 * @free_seg_list: Free descriptors
385 * @common: DMA common channel
386 * @desc_pool: Descriptors pool
387 * @dev: The dma device
388 * @irq: Channel IRQ
389 * @id: Channel ID
390 * @direction: Transfer direction
391 * @num_frms: Number of frames
392 * @has_sg: Support scatter transfers
393 * @cyclic: Check for cyclic transfers.
394 * @genlock: Support genlock mode
395 * @err: Channel has errors
396 * @idle: Check for channel idle
397 * @terminating: Check for channel being synchronized by user
398 * @tasklet: Cleanup work after irq
399 * @config: Device configuration info
400 * @flush_on_fsync: Flush on Frame sync
401 * @desc_pendingcount: Descriptor pending count
402 * @ext_addr: Indicates 64 bit addressing is supported by dma channel
403 * @desc_submitcount: Descriptor h/w submitted count
404 * @seg_v: Statically allocated segments base
405 * @seg_mv: Statically allocated segments base for MCDMA
406 * @seg_p: Physical allocated segments base
407 * @cyclic_seg_v: Statically allocated segment base for cyclic transfers
408 * @cyclic_seg_p: Physical allocated segments base for cyclic dma
409 * @start_transfer: Differentiate b/w DMA IP's transfer
410 * @stop_transfer: Differentiate b/w DMA IP's quiesce
411 * @tdest: TDEST value for mcdma
412 * @has_vflip: S2MM vertical flip
413 */
414struct xilinx_dma_chan {
415 struct xilinx_dma_device *xdev;
416 u32 ctrl_offset;
417 u32 desc_offset;
418 spinlock_t lock;
419 struct list_head pending_list;
420 struct list_head active_list;
421 struct list_head done_list;
422 struct list_head free_seg_list;
423 struct dma_chan common;
424 struct dma_pool *desc_pool;
425 struct device *dev;
426 int irq;
427 int id;
428 enum dma_transfer_direction direction;
429 int num_frms;
430 bool has_sg;
431 bool cyclic;
432 bool genlock;
433 bool err;
434 bool idle;
435 bool terminating;
436 struct tasklet_struct tasklet;
437 struct xilinx_vdma_config config;
438 bool flush_on_fsync;
439 u32 desc_pendingcount;
440 bool ext_addr;
441 u32 desc_submitcount;
442 struct xilinx_axidma_tx_segment *seg_v;
443 struct xilinx_aximcdma_tx_segment *seg_mv;
444 dma_addr_t seg_p;
445 struct xilinx_axidma_tx_segment *cyclic_seg_v;
446 dma_addr_t cyclic_seg_p;
447 void (*start_transfer)(struct xilinx_dma_chan *chan);
448 int (*stop_transfer)(struct xilinx_dma_chan *chan);
449 u16 tdest;
450 bool has_vflip;
451};
452
453/**
454 * enum xdma_ip_type - DMA IP type.
455 *
456 * @XDMA_TYPE_AXIDMA: Axi dma ip.
457 * @XDMA_TYPE_CDMA: Axi cdma ip.
458 * @XDMA_TYPE_VDMA: Axi vdma ip.
459 * @XDMA_TYPE_AXIMCDMA: Axi MCDMA ip.
460 *
461 */
462enum xdma_ip_type {
463 XDMA_TYPE_AXIDMA = 0,
464 XDMA_TYPE_CDMA,
465 XDMA_TYPE_VDMA,
466 XDMA_TYPE_AXIMCDMA
467};
468
469struct xilinx_dma_config {
470 enum xdma_ip_type dmatype;
471 int (*clk_init)(struct platform_device *pdev, struct clk **axi_clk,
472 struct clk **tx_clk, struct clk **txs_clk,
473 struct clk **rx_clk, struct clk **rxs_clk);
474 irqreturn_t (*irq_handler)(int irq, void *data);
475 const int max_channels;
476};
477
478/**
479 * struct xilinx_dma_device - DMA device structure
480 * @regs: I/O mapped base address
481 * @dev: Device Structure
482 * @common: DMA device structure
483 * @chan: Driver specific DMA channel
484 * @flush_on_fsync: Flush on frame sync
485 * @ext_addr: Indicates 64 bit addressing is supported by dma device
486 * @pdev: Platform device structure pointer
487 * @dma_config: DMA config structure
488 * @axi_clk: DMA Axi4-lite interace clock
489 * @tx_clk: DMA mm2s clock
490 * @txs_clk: DMA mm2s stream clock
491 * @rx_clk: DMA s2mm clock
492 * @rxs_clk: DMA s2mm stream clock
493 * @s2mm_chan_id: DMA s2mm channel identifier
494 * @mm2s_chan_id: DMA mm2s channel identifier
495 * @max_buffer_len: Max buffer length
496 */
497struct xilinx_dma_device {
498 void __iomem *regs;
499 struct device *dev;
500 struct dma_device common;
501 struct xilinx_dma_chan *chan[XILINX_MCDMA_MAX_CHANS_PER_DEVICE];
502 u32 flush_on_fsync;
503 bool ext_addr;
504 struct platform_device *pdev;
505 const struct xilinx_dma_config *dma_config;
506 struct clk *axi_clk;
507 struct clk *tx_clk;
508 struct clk *txs_clk;
509 struct clk *rx_clk;
510 struct clk *rxs_clk;
511 u32 s2mm_chan_id;
512 u32 mm2s_chan_id;
513 u32 max_buffer_len;
514};
515
516/* Macros */
517#define to_xilinx_chan(chan) \
518 container_of(chan, struct xilinx_dma_chan, common)
519#define to_dma_tx_descriptor(tx) \
520 container_of(tx, struct xilinx_dma_tx_descriptor, async_tx)
521#define xilinx_dma_poll_timeout(chan, reg, val, cond, delay_us, timeout_us) \
522 readl_poll_timeout_atomic(chan->xdev->regs + chan->ctrl_offset + reg, \
523 val, cond, delay_us, timeout_us)
524
525/* IO accessors */
526static inline u32 dma_read(struct xilinx_dma_chan *chan, u32 reg)
527{
528 return ioread32(chan->xdev->regs + reg);
529}
530
531static inline void dma_write(struct xilinx_dma_chan *chan, u32 reg, u32 value)
532{
533 iowrite32(value, chan->xdev->regs + reg);
534}
535
536static inline void vdma_desc_write(struct xilinx_dma_chan *chan, u32 reg,
537 u32 value)
538{
539 dma_write(chan, chan->desc_offset + reg, value);
540}
541
542static inline u32 dma_ctrl_read(struct xilinx_dma_chan *chan, u32 reg)
543{
544 return dma_read(chan, chan->ctrl_offset + reg);
545}
546
547static inline void dma_ctrl_write(struct xilinx_dma_chan *chan, u32 reg,
548 u32 value)
549{
550 dma_write(chan, chan->ctrl_offset + reg, value);
551}
552
553static inline void dma_ctrl_clr(struct xilinx_dma_chan *chan, u32 reg,
554 u32 clr)
555{
556 dma_ctrl_write(chan, reg, dma_ctrl_read(chan, reg) & ~clr);
557}
558
559static inline void dma_ctrl_set(struct xilinx_dma_chan *chan, u32 reg,
560 u32 set)
561{
562 dma_ctrl_write(chan, reg, dma_ctrl_read(chan, reg) | set);
563}
564
565/**
566 * vdma_desc_write_64 - 64-bit descriptor write
567 * @chan: Driver specific VDMA channel
568 * @reg: Register to write
569 * @value_lsb: lower address of the descriptor.
570 * @value_msb: upper address of the descriptor.
571 *
572 * Since vdma driver is trying to write to a register offset which is not a
573 * multiple of 64 bits(ex : 0x5c), we are writing as two separate 32 bits
574 * instead of a single 64 bit register write.
575 */
576static inline void vdma_desc_write_64(struct xilinx_dma_chan *chan, u32 reg,
577 u32 value_lsb, u32 value_msb)
578{
579 /* Write the lsb 32 bits*/
580 writel(value_lsb, chan->xdev->regs + chan->desc_offset + reg);
581
582 /* Write the msb 32 bits */
583 writel(value_msb, chan->xdev->regs + chan->desc_offset + reg + 4);
584}
585
586static inline void dma_writeq(struct xilinx_dma_chan *chan, u32 reg, u64 value)
587{
588 lo_hi_writeq(value, chan->xdev->regs + chan->ctrl_offset + reg);
589}
590
591static inline void xilinx_write(struct xilinx_dma_chan *chan, u32 reg,
592 dma_addr_t addr)
593{
594 if (chan->ext_addr)
595 dma_writeq(chan, reg, addr);
596 else
597 dma_ctrl_write(chan, reg, addr);
598}
599
600static inline void xilinx_axidma_buf(struct xilinx_dma_chan *chan,
601 struct xilinx_axidma_desc_hw *hw,
602 dma_addr_t buf_addr, size_t sg_used,
603 size_t period_len)
604{
605 if (chan->ext_addr) {
606 hw->buf_addr = lower_32_bits(buf_addr + sg_used + period_len);
607 hw->buf_addr_msb = upper_32_bits(buf_addr + sg_used +
608 period_len);
609 } else {
610 hw->buf_addr = buf_addr + sg_used + period_len;
611 }
612}
613
614static inline void xilinx_aximcdma_buf(struct xilinx_dma_chan *chan,
615 struct xilinx_aximcdma_desc_hw *hw,
616 dma_addr_t buf_addr, size_t sg_used)
617{
618 if (chan->ext_addr) {
619 hw->buf_addr = lower_32_bits(buf_addr + sg_used);
620 hw->buf_addr_msb = upper_32_bits(buf_addr + sg_used);
621 } else {
622 hw->buf_addr = buf_addr + sg_used;
623 }
624}
625
626/* -----------------------------------------------------------------------------
627 * Descriptors and segments alloc and free
628 */
629
630/**
631 * xilinx_vdma_alloc_tx_segment - Allocate transaction segment
632 * @chan: Driver specific DMA channel
633 *
634 * Return: The allocated segment on success and NULL on failure.
635 */
636static struct xilinx_vdma_tx_segment *
637xilinx_vdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
638{
639 struct xilinx_vdma_tx_segment *segment;
640 dma_addr_t phys;
641
642 segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
643 if (!segment)
644 return NULL;
645
646 segment->phys = phys;
647
648 return segment;
649}
650
651/**
652 * xilinx_cdma_alloc_tx_segment - Allocate transaction segment
653 * @chan: Driver specific DMA channel
654 *
655 * Return: The allocated segment on success and NULL on failure.
656 */
657static struct xilinx_cdma_tx_segment *
658xilinx_cdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
659{
660 struct xilinx_cdma_tx_segment *segment;
661 dma_addr_t phys;
662
663 segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
664 if (!segment)
665 return NULL;
666
667 segment->phys = phys;
668
669 return segment;
670}
671
672/**
673 * xilinx_axidma_alloc_tx_segment - Allocate transaction segment
674 * @chan: Driver specific DMA channel
675 *
676 * Return: The allocated segment on success and NULL on failure.
677 */
678static struct xilinx_axidma_tx_segment *
679xilinx_axidma_alloc_tx_segment(struct xilinx_dma_chan *chan)
680{
681 struct xilinx_axidma_tx_segment *segment = NULL;
682 unsigned long flags;
683
684 spin_lock_irqsave(&chan->lock, flags);
685 if (!list_empty(&chan->free_seg_list)) {
686 segment = list_first_entry(&chan->free_seg_list,
687 struct xilinx_axidma_tx_segment,
688 node);
689 list_del(&segment->node);
690 }
691 spin_unlock_irqrestore(&chan->lock, flags);
692
693 if (!segment)
694 dev_dbg(chan->dev, "Could not find free tx segment\n");
695
696 return segment;
697}
698
699/**
700 * xilinx_aximcdma_alloc_tx_segment - Allocate transaction segment
701 * @chan: Driver specific DMA channel
702 *
703 * Return: The allocated segment on success and NULL on failure.
704 */
705static struct xilinx_aximcdma_tx_segment *
706xilinx_aximcdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
707{
708 struct xilinx_aximcdma_tx_segment *segment = NULL;
709 unsigned long flags;
710
711 spin_lock_irqsave(&chan->lock, flags);
712 if (!list_empty(&chan->free_seg_list)) {
713 segment = list_first_entry(&chan->free_seg_list,
714 struct xilinx_aximcdma_tx_segment,
715 node);
716 list_del(&segment->node);
717 }
718 spin_unlock_irqrestore(&chan->lock, flags);
719
720 return segment;
721}
722
723static void xilinx_dma_clean_hw_desc(struct xilinx_axidma_desc_hw *hw)
724{
725 u32 next_desc = hw->next_desc;
726 u32 next_desc_msb = hw->next_desc_msb;
727
728 memset(hw, 0, sizeof(struct xilinx_axidma_desc_hw));
729
730 hw->next_desc = next_desc;
731 hw->next_desc_msb = next_desc_msb;
732}
733
734static void xilinx_mcdma_clean_hw_desc(struct xilinx_aximcdma_desc_hw *hw)
735{
736 u32 next_desc = hw->next_desc;
737 u32 next_desc_msb = hw->next_desc_msb;
738
739 memset(hw, 0, sizeof(struct xilinx_aximcdma_desc_hw));
740
741 hw->next_desc = next_desc;
742 hw->next_desc_msb = next_desc_msb;
743}
744
745/**
746 * xilinx_dma_free_tx_segment - Free transaction segment
747 * @chan: Driver specific DMA channel
748 * @segment: DMA transaction segment
749 */
750static void xilinx_dma_free_tx_segment(struct xilinx_dma_chan *chan,
751 struct xilinx_axidma_tx_segment *segment)
752{
753 xilinx_dma_clean_hw_desc(&segment->hw);
754
755 list_add_tail(&segment->node, &chan->free_seg_list);
756}
757
758/**
759 * xilinx_mcdma_free_tx_segment - Free transaction segment
760 * @chan: Driver specific DMA channel
761 * @segment: DMA transaction segment
762 */
763static void xilinx_mcdma_free_tx_segment(struct xilinx_dma_chan *chan,
764 struct xilinx_aximcdma_tx_segment *
765 segment)
766{
767 xilinx_mcdma_clean_hw_desc(&segment->hw);
768
769 list_add_tail(&segment->node, &chan->free_seg_list);
770}
771
772/**
773 * xilinx_cdma_free_tx_segment - Free transaction segment
774 * @chan: Driver specific DMA channel
775 * @segment: DMA transaction segment
776 */
777static void xilinx_cdma_free_tx_segment(struct xilinx_dma_chan *chan,
778 struct xilinx_cdma_tx_segment *segment)
779{
780 dma_pool_free(chan->desc_pool, segment, segment->phys);
781}
782
783/**
784 * xilinx_vdma_free_tx_segment - Free transaction segment
785 * @chan: Driver specific DMA channel
786 * @segment: DMA transaction segment
787 */
788static void xilinx_vdma_free_tx_segment(struct xilinx_dma_chan *chan,
789 struct xilinx_vdma_tx_segment *segment)
790{
791 dma_pool_free(chan->desc_pool, segment, segment->phys);
792}
793
794/**
795 * xilinx_dma_alloc_tx_descriptor - Allocate transaction descriptor
796 * @chan: Driver specific DMA channel
797 *
798 * Return: The allocated descriptor on success and NULL on failure.
799 */
800static struct xilinx_dma_tx_descriptor *
801xilinx_dma_alloc_tx_descriptor(struct xilinx_dma_chan *chan)
802{
803 struct xilinx_dma_tx_descriptor *desc;
804
805 desc = kzalloc(sizeof(*desc), GFP_NOWAIT);
806 if (!desc)
807 return NULL;
808
809 INIT_LIST_HEAD(&desc->segments);
810
811 return desc;
812}
813
814/**
815 * xilinx_dma_free_tx_descriptor - Free transaction descriptor
816 * @chan: Driver specific DMA channel
817 * @desc: DMA transaction descriptor
818 */
819static void
820xilinx_dma_free_tx_descriptor(struct xilinx_dma_chan *chan,
821 struct xilinx_dma_tx_descriptor *desc)
822{
823 struct xilinx_vdma_tx_segment *segment, *next;
824 struct xilinx_cdma_tx_segment *cdma_segment, *cdma_next;
825 struct xilinx_axidma_tx_segment *axidma_segment, *axidma_next;
826 struct xilinx_aximcdma_tx_segment *aximcdma_segment, *aximcdma_next;
827
828 if (!desc)
829 return;
830
831 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
832 list_for_each_entry_safe(segment, next, &desc->segments, node) {
833 list_del(&segment->node);
834 xilinx_vdma_free_tx_segment(chan, segment);
835 }
836 } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
837 list_for_each_entry_safe(cdma_segment, cdma_next,
838 &desc->segments, node) {
839 list_del(&cdma_segment->node);
840 xilinx_cdma_free_tx_segment(chan, cdma_segment);
841 }
842 } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
843 list_for_each_entry_safe(axidma_segment, axidma_next,
844 &desc->segments, node) {
845 list_del(&axidma_segment->node);
846 xilinx_dma_free_tx_segment(chan, axidma_segment);
847 }
848 } else {
849 list_for_each_entry_safe(aximcdma_segment, aximcdma_next,
850 &desc->segments, node) {
851 list_del(&aximcdma_segment->node);
852 xilinx_mcdma_free_tx_segment(chan, aximcdma_segment);
853 }
854 }
855
856 kfree(desc);
857}
858
859/* Required functions */
860
861/**
862 * xilinx_dma_free_desc_list - Free descriptors list
863 * @chan: Driver specific DMA channel
864 * @list: List to parse and delete the descriptor
865 */
866static void xilinx_dma_free_desc_list(struct xilinx_dma_chan *chan,
867 struct list_head *list)
868{
869 struct xilinx_dma_tx_descriptor *desc, *next;
870
871 list_for_each_entry_safe(desc, next, list, node) {
872 list_del(&desc->node);
873 xilinx_dma_free_tx_descriptor(chan, desc);
874 }
875}
876
877/**
878 * xilinx_dma_free_descriptors - Free channel descriptors
879 * @chan: Driver specific DMA channel
880 */
881static void xilinx_dma_free_descriptors(struct xilinx_dma_chan *chan)
882{
883 unsigned long flags;
884
885 spin_lock_irqsave(&chan->lock, flags);
886
887 xilinx_dma_free_desc_list(chan, &chan->pending_list);
888 xilinx_dma_free_desc_list(chan, &chan->done_list);
889 xilinx_dma_free_desc_list(chan, &chan->active_list);
890
891 spin_unlock_irqrestore(&chan->lock, flags);
892}
893
894/**
895 * xilinx_dma_free_chan_resources - Free channel resources
896 * @dchan: DMA channel
897 */
898static void xilinx_dma_free_chan_resources(struct dma_chan *dchan)
899{
900 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
901 unsigned long flags;
902
903 dev_dbg(chan->dev, "Free all channel resources.\n");
904
905 xilinx_dma_free_descriptors(chan);
906
907 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
908 spin_lock_irqsave(&chan->lock, flags);
909 INIT_LIST_HEAD(&chan->free_seg_list);
910 spin_unlock_irqrestore(&chan->lock, flags);
911
912 /* Free memory that is allocated for BD */
913 dma_free_coherent(chan->dev, sizeof(*chan->seg_v) *
914 XILINX_DMA_NUM_DESCS, chan->seg_v,
915 chan->seg_p);
916
917 /* Free Memory that is allocated for cyclic DMA Mode */
918 dma_free_coherent(chan->dev, sizeof(*chan->cyclic_seg_v),
919 chan->cyclic_seg_v, chan->cyclic_seg_p);
920 }
921
922 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
923 spin_lock_irqsave(&chan->lock, flags);
924 INIT_LIST_HEAD(&chan->free_seg_list);
925 spin_unlock_irqrestore(&chan->lock, flags);
926
927 /* Free memory that is allocated for BD */
928 dma_free_coherent(chan->dev, sizeof(*chan->seg_mv) *
929 XILINX_DMA_NUM_DESCS, chan->seg_mv,
930 chan->seg_p);
931 }
932
933 if (chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIDMA &&
934 chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIMCDMA) {
935 dma_pool_destroy(chan->desc_pool);
936 chan->desc_pool = NULL;
937 }
938
939}
940
941/**
942 * xilinx_dma_get_residue - Compute residue for a given descriptor
943 * @chan: Driver specific dma channel
944 * @desc: dma transaction descriptor
945 *
946 * Return: The number of residue bytes for the descriptor.
947 */
948static u32 xilinx_dma_get_residue(struct xilinx_dma_chan *chan,
949 struct xilinx_dma_tx_descriptor *desc)
950{
951 struct xilinx_cdma_tx_segment *cdma_seg;
952 struct xilinx_axidma_tx_segment *axidma_seg;
953 struct xilinx_aximcdma_tx_segment *aximcdma_seg;
954 struct xilinx_cdma_desc_hw *cdma_hw;
955 struct xilinx_axidma_desc_hw *axidma_hw;
956 struct xilinx_aximcdma_desc_hw *aximcdma_hw;
957 struct list_head *entry;
958 u32 residue = 0;
959
960 list_for_each(entry, &desc->segments) {
961 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
962 cdma_seg = list_entry(entry,
963 struct xilinx_cdma_tx_segment,
964 node);
965 cdma_hw = &cdma_seg->hw;
966 residue += (cdma_hw->control - cdma_hw->status) &
967 chan->xdev->max_buffer_len;
968 } else if (chan->xdev->dma_config->dmatype ==
969 XDMA_TYPE_AXIDMA) {
970 axidma_seg = list_entry(entry,
971 struct xilinx_axidma_tx_segment,
972 node);
973 axidma_hw = &axidma_seg->hw;
974 residue += (axidma_hw->control - axidma_hw->status) &
975 chan->xdev->max_buffer_len;
976 } else {
977 aximcdma_seg =
978 list_entry(entry,
979 struct xilinx_aximcdma_tx_segment,
980 node);
981 aximcdma_hw = &aximcdma_seg->hw;
982 residue +=
983 (aximcdma_hw->control - aximcdma_hw->status) &
984 chan->xdev->max_buffer_len;
985 }
986 }
987
988 return residue;
989}
990
991/**
992 * xilinx_dma_chan_handle_cyclic - Cyclic dma callback
993 * @chan: Driver specific dma channel
994 * @desc: dma transaction descriptor
995 * @flags: flags for spin lock
996 */
997static void xilinx_dma_chan_handle_cyclic(struct xilinx_dma_chan *chan,
998 struct xilinx_dma_tx_descriptor *desc,
999 unsigned long *flags)
1000{
1001 struct dmaengine_desc_callback cb;
1002
1003 dmaengine_desc_get_callback(&desc->async_tx, &cb);
1004 if (dmaengine_desc_callback_valid(&cb)) {
1005 spin_unlock_irqrestore(&chan->lock, *flags);
1006 dmaengine_desc_callback_invoke(&cb, NULL);
1007 spin_lock_irqsave(&chan->lock, *flags);
1008 }
1009}
1010
1011/**
1012 * xilinx_dma_chan_desc_cleanup - Clean channel descriptors
1013 * @chan: Driver specific DMA channel
1014 */
1015static void xilinx_dma_chan_desc_cleanup(struct xilinx_dma_chan *chan)
1016{
1017 struct xilinx_dma_tx_descriptor *desc, *next;
1018 unsigned long flags;
1019
1020 spin_lock_irqsave(&chan->lock, flags);
1021
1022 list_for_each_entry_safe(desc, next, &chan->done_list, node) {
1023 struct dmaengine_result result;
1024
1025 if (desc->cyclic) {
1026 xilinx_dma_chan_handle_cyclic(chan, desc, &flags);
1027 break;
1028 }
1029
1030 /* Remove from the list of running transactions */
1031 list_del(&desc->node);
1032
1033 if (unlikely(desc->err)) {
1034 if (chan->direction == DMA_DEV_TO_MEM)
1035 result.result = DMA_TRANS_READ_FAILED;
1036 else
1037 result.result = DMA_TRANS_WRITE_FAILED;
1038 } else {
1039 result.result = DMA_TRANS_NOERROR;
1040 }
1041
1042 result.residue = desc->residue;
1043
1044 /* Run the link descriptor callback function */
1045 spin_unlock_irqrestore(&chan->lock, flags);
1046 dmaengine_desc_get_callback_invoke(&desc->async_tx, &result);
1047 spin_lock_irqsave(&chan->lock, flags);
1048
1049 /* Run any dependencies, then free the descriptor */
1050 dma_run_dependencies(&desc->async_tx);
1051 xilinx_dma_free_tx_descriptor(chan, desc);
1052
1053 /*
1054 * While we ran a callback the user called a terminate function,
1055 * which takes care of cleaning up any remaining descriptors
1056 */
1057 if (chan->terminating)
1058 break;
1059 }
1060
1061 spin_unlock_irqrestore(&chan->lock, flags);
1062}
1063
1064/**
1065 * xilinx_dma_do_tasklet - Schedule completion tasklet
1066 * @t: Pointer to the Xilinx DMA channel structure
1067 */
1068static void xilinx_dma_do_tasklet(struct tasklet_struct *t)
1069{
1070 struct xilinx_dma_chan *chan = from_tasklet(chan, t, tasklet);
1071
1072 xilinx_dma_chan_desc_cleanup(chan);
1073}
1074
1075/**
1076 * xilinx_dma_alloc_chan_resources - Allocate channel resources
1077 * @dchan: DMA channel
1078 *
1079 * Return: '0' on success and failure value on error
1080 */
1081static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
1082{
1083 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1084 int i;
1085
1086 /* Has this channel already been allocated? */
1087 if (chan->desc_pool)
1088 return 0;
1089
1090 /*
1091 * We need the descriptor to be aligned to 64bytes
1092 * for meeting Xilinx VDMA specification requirement.
1093 */
1094 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
1095 /* Allocate the buffer descriptors. */
1096 chan->seg_v = dma_alloc_coherent(chan->dev,
1097 sizeof(*chan->seg_v) * XILINX_DMA_NUM_DESCS,
1098 &chan->seg_p, GFP_KERNEL);
1099 if (!chan->seg_v) {
1100 dev_err(chan->dev,
1101 "unable to allocate channel %d descriptors\n",
1102 chan->id);
1103 return -ENOMEM;
1104 }
1105 /*
1106 * For cyclic DMA mode we need to program the tail Descriptor
1107 * register with a value which is not a part of the BD chain
1108 * so allocating a desc segment during channel allocation for
1109 * programming tail descriptor.
1110 */
1111 chan->cyclic_seg_v = dma_alloc_coherent(chan->dev,
1112 sizeof(*chan->cyclic_seg_v),
1113 &chan->cyclic_seg_p,
1114 GFP_KERNEL);
1115 if (!chan->cyclic_seg_v) {
1116 dev_err(chan->dev,
1117 "unable to allocate desc segment for cyclic DMA\n");
1118 dma_free_coherent(chan->dev, sizeof(*chan->seg_v) *
1119 XILINX_DMA_NUM_DESCS, chan->seg_v,
1120 chan->seg_p);
1121 return -ENOMEM;
1122 }
1123 chan->cyclic_seg_v->phys = chan->cyclic_seg_p;
1124
1125 for (i = 0; i < XILINX_DMA_NUM_DESCS; i++) {
1126 chan->seg_v[i].hw.next_desc =
1127 lower_32_bits(chan->seg_p + sizeof(*chan->seg_v) *
1128 ((i + 1) % XILINX_DMA_NUM_DESCS));
1129 chan->seg_v[i].hw.next_desc_msb =
1130 upper_32_bits(chan->seg_p + sizeof(*chan->seg_v) *
1131 ((i + 1) % XILINX_DMA_NUM_DESCS));
1132 chan->seg_v[i].phys = chan->seg_p +
1133 sizeof(*chan->seg_v) * i;
1134 list_add_tail(&chan->seg_v[i].node,
1135 &chan->free_seg_list);
1136 }
1137 } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
1138 /* Allocate the buffer descriptors. */
1139 chan->seg_mv = dma_alloc_coherent(chan->dev,
1140 sizeof(*chan->seg_mv) *
1141 XILINX_DMA_NUM_DESCS,
1142 &chan->seg_p, GFP_KERNEL);
1143 if (!chan->seg_mv) {
1144 dev_err(chan->dev,
1145 "unable to allocate channel %d descriptors\n",
1146 chan->id);
1147 return -ENOMEM;
1148 }
1149 for (i = 0; i < XILINX_DMA_NUM_DESCS; i++) {
1150 chan->seg_mv[i].hw.next_desc =
1151 lower_32_bits(chan->seg_p + sizeof(*chan->seg_mv) *
1152 ((i + 1) % XILINX_DMA_NUM_DESCS));
1153 chan->seg_mv[i].hw.next_desc_msb =
1154 upper_32_bits(chan->seg_p + sizeof(*chan->seg_mv) *
1155 ((i + 1) % XILINX_DMA_NUM_DESCS));
1156 chan->seg_mv[i].phys = chan->seg_p +
1157 sizeof(*chan->seg_mv) * i;
1158 list_add_tail(&chan->seg_mv[i].node,
1159 &chan->free_seg_list);
1160 }
1161 } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
1162 chan->desc_pool = dma_pool_create("xilinx_cdma_desc_pool",
1163 chan->dev,
1164 sizeof(struct xilinx_cdma_tx_segment),
1165 __alignof__(struct xilinx_cdma_tx_segment),
1166 0);
1167 } else {
1168 chan->desc_pool = dma_pool_create("xilinx_vdma_desc_pool",
1169 chan->dev,
1170 sizeof(struct xilinx_vdma_tx_segment),
1171 __alignof__(struct xilinx_vdma_tx_segment),
1172 0);
1173 }
1174
1175 if (!chan->desc_pool &&
1176 ((chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIDMA) &&
1177 chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIMCDMA)) {
1178 dev_err(chan->dev,
1179 "unable to allocate channel %d descriptor pool\n",
1180 chan->id);
1181 return -ENOMEM;
1182 }
1183
1184 dma_cookie_init(dchan);
1185
1186 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
1187 /* For AXI DMA resetting once channel will reset the
1188 * other channel as well so enable the interrupts here.
1189 */
1190 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1191 XILINX_DMA_DMAXR_ALL_IRQ_MASK);
1192 }
1193
1194 if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
1195 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1196 XILINX_CDMA_CR_SGMODE);
1197
1198 return 0;
1199}
1200
1201/**
1202 * xilinx_dma_calc_copysize - Calculate the amount of data to copy
1203 * @chan: Driver specific DMA channel
1204 * @size: Total data that needs to be copied
1205 * @done: Amount of data that has been already copied
1206 *
1207 * Return: Amount of data that has to be copied
1208 */
1209static int xilinx_dma_calc_copysize(struct xilinx_dma_chan *chan,
1210 int size, int done)
1211{
1212 size_t copy;
1213
1214 copy = min_t(size_t, size - done,
1215 chan->xdev->max_buffer_len);
1216
1217 if ((copy + done < size) &&
1218 chan->xdev->common.copy_align) {
1219 /*
1220 * If this is not the last descriptor, make sure
1221 * the next one will be properly aligned
1222 */
1223 copy = rounddown(copy,
1224 (1 << chan->xdev->common.copy_align));
1225 }
1226 return copy;
1227}
1228
1229/**
1230 * xilinx_dma_tx_status - Get DMA transaction status
1231 * @dchan: DMA channel
1232 * @cookie: Transaction identifier
1233 * @txstate: Transaction state
1234 *
1235 * Return: DMA transaction status
1236 */
1237static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
1238 dma_cookie_t cookie,
1239 struct dma_tx_state *txstate)
1240{
1241 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1242 struct xilinx_dma_tx_descriptor *desc;
1243 enum dma_status ret;
1244 unsigned long flags;
1245 u32 residue = 0;
1246
1247 ret = dma_cookie_status(dchan, cookie, txstate);
1248 if (ret == DMA_COMPLETE || !txstate)
1249 return ret;
1250
1251 spin_lock_irqsave(&chan->lock, flags);
1252 if (!list_empty(&chan->active_list)) {
1253 desc = list_last_entry(&chan->active_list,
1254 struct xilinx_dma_tx_descriptor, node);
1255 /*
1256 * VDMA and simple mode do not support residue reporting, so the
1257 * residue field will always be 0.
1258 */
1259 if (chan->has_sg && chan->xdev->dma_config->dmatype != XDMA_TYPE_VDMA)
1260 residue = xilinx_dma_get_residue(chan, desc);
1261 }
1262 spin_unlock_irqrestore(&chan->lock, flags);
1263
1264 dma_set_residue(txstate, residue);
1265
1266 return ret;
1267}
1268
1269/**
1270 * xilinx_dma_stop_transfer - Halt DMA channel
1271 * @chan: Driver specific DMA channel
1272 *
1273 * Return: '0' on success and failure value on error
1274 */
1275static int xilinx_dma_stop_transfer(struct xilinx_dma_chan *chan)
1276{
1277 u32 val;
1278
1279 dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
1280
1281 /* Wait for the hardware to halt */
1282 return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
1283 val & XILINX_DMA_DMASR_HALTED, 0,
1284 XILINX_DMA_LOOP_COUNT);
1285}
1286
1287/**
1288 * xilinx_cdma_stop_transfer - Wait for the current transfer to complete
1289 * @chan: Driver specific DMA channel
1290 *
1291 * Return: '0' on success and failure value on error
1292 */
1293static int xilinx_cdma_stop_transfer(struct xilinx_dma_chan *chan)
1294{
1295 u32 val;
1296
1297 return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
1298 val & XILINX_DMA_DMASR_IDLE, 0,
1299 XILINX_DMA_LOOP_COUNT);
1300}
1301
1302/**
1303 * xilinx_dma_start - Start DMA channel
1304 * @chan: Driver specific DMA channel
1305 */
1306static void xilinx_dma_start(struct xilinx_dma_chan *chan)
1307{
1308 int err;
1309 u32 val;
1310
1311 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
1312
1313 /* Wait for the hardware to start */
1314 err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
1315 !(val & XILINX_DMA_DMASR_HALTED), 0,
1316 XILINX_DMA_LOOP_COUNT);
1317
1318 if (err) {
1319 dev_err(chan->dev, "Cannot start channel %p: %x\n",
1320 chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
1321
1322 chan->err = true;
1323 }
1324}
1325
1326/**
1327 * xilinx_vdma_start_transfer - Starts VDMA transfer
1328 * @chan: Driver specific channel struct pointer
1329 */
1330static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
1331{
1332 struct xilinx_vdma_config *config = &chan->config;
1333 struct xilinx_dma_tx_descriptor *desc;
1334 u32 reg, j;
1335 struct xilinx_vdma_tx_segment *segment, *last = NULL;
1336 int i = 0;
1337
1338 /* This function was invoked with lock held */
1339 if (chan->err)
1340 return;
1341
1342 if (!chan->idle)
1343 return;
1344
1345 if (list_empty(&chan->pending_list))
1346 return;
1347
1348 desc = list_first_entry(&chan->pending_list,
1349 struct xilinx_dma_tx_descriptor, node);
1350
1351 /* Configure the hardware using info in the config structure */
1352 if (chan->has_vflip) {
1353 reg = dma_read(chan, XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP);
1354 reg &= ~XILINX_VDMA_ENABLE_VERTICAL_FLIP;
1355 reg |= config->vflip_en;
1356 dma_write(chan, XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP,
1357 reg);
1358 }
1359
1360 reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
1361
1362 if (config->frm_cnt_en)
1363 reg |= XILINX_DMA_DMACR_FRAMECNT_EN;
1364 else
1365 reg &= ~XILINX_DMA_DMACR_FRAMECNT_EN;
1366
1367 /* If not parking, enable circular mode */
1368 if (config->park)
1369 reg &= ~XILINX_DMA_DMACR_CIRC_EN;
1370 else
1371 reg |= XILINX_DMA_DMACR_CIRC_EN;
1372
1373 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
1374
1375 j = chan->desc_submitcount;
1376 reg = dma_read(chan, XILINX_DMA_REG_PARK_PTR);
1377 if (chan->direction == DMA_MEM_TO_DEV) {
1378 reg &= ~XILINX_DMA_PARK_PTR_RD_REF_MASK;
1379 reg |= j << XILINX_DMA_PARK_PTR_RD_REF_SHIFT;
1380 } else {
1381 reg &= ~XILINX_DMA_PARK_PTR_WR_REF_MASK;
1382 reg |= j << XILINX_DMA_PARK_PTR_WR_REF_SHIFT;
1383 }
1384 dma_write(chan, XILINX_DMA_REG_PARK_PTR, reg);
1385
1386 /* Start the hardware */
1387 xilinx_dma_start(chan);
1388
1389 if (chan->err)
1390 return;
1391
1392 /* Start the transfer */
1393 if (chan->desc_submitcount < chan->num_frms)
1394 i = chan->desc_submitcount;
1395
1396 list_for_each_entry(segment, &desc->segments, node) {
1397 if (chan->ext_addr)
1398 vdma_desc_write_64(chan,
1399 XILINX_VDMA_REG_START_ADDRESS_64(i++),
1400 segment->hw.buf_addr,
1401 segment->hw.buf_addr_msb);
1402 else
1403 vdma_desc_write(chan,
1404 XILINX_VDMA_REG_START_ADDRESS(i++),
1405 segment->hw.buf_addr);
1406
1407 last = segment;
1408 }
1409
1410 if (!last)
1411 return;
1412
1413 /* HW expects these parameters to be same for one transaction */
1414 vdma_desc_write(chan, XILINX_DMA_REG_HSIZE, last->hw.hsize);
1415 vdma_desc_write(chan, XILINX_DMA_REG_FRMDLY_STRIDE,
1416 last->hw.stride);
1417 vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize);
1418
1419 chan->desc_submitcount++;
1420 chan->desc_pendingcount--;
1421 list_move_tail(&desc->node, &chan->active_list);
1422 if (chan->desc_submitcount == chan->num_frms)
1423 chan->desc_submitcount = 0;
1424
1425 chan->idle = false;
1426}
1427
1428/**
1429 * xilinx_cdma_start_transfer - Starts cdma transfer
1430 * @chan: Driver specific channel struct pointer
1431 */
1432static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
1433{
1434 struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
1435 struct xilinx_cdma_tx_segment *tail_segment;
1436 u32 ctrl_reg = dma_read(chan, XILINX_DMA_REG_DMACR);
1437
1438 if (chan->err)
1439 return;
1440
1441 if (!chan->idle)
1442 return;
1443
1444 if (list_empty(&chan->pending_list))
1445 return;
1446
1447 head_desc = list_first_entry(&chan->pending_list,
1448 struct xilinx_dma_tx_descriptor, node);
1449 tail_desc = list_last_entry(&chan->pending_list,
1450 struct xilinx_dma_tx_descriptor, node);
1451 tail_segment = list_last_entry(&tail_desc->segments,
1452 struct xilinx_cdma_tx_segment, node);
1453
1454 if (chan->desc_pendingcount <= XILINX_DMA_COALESCE_MAX) {
1455 ctrl_reg &= ~XILINX_DMA_CR_COALESCE_MAX;
1456 ctrl_reg |= chan->desc_pendingcount <<
1457 XILINX_DMA_CR_COALESCE_SHIFT;
1458 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, ctrl_reg);
1459 }
1460
1461 if (chan->has_sg) {
1462 dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
1463 XILINX_CDMA_CR_SGMODE);
1464
1465 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1466 XILINX_CDMA_CR_SGMODE);
1467
1468 xilinx_write(chan, XILINX_DMA_REG_CURDESC,
1469 head_desc->async_tx.phys);
1470
1471 /* Update tail ptr register which will start the transfer */
1472 xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
1473 tail_segment->phys);
1474 } else {
1475 /* In simple mode */
1476 struct xilinx_cdma_tx_segment *segment;
1477 struct xilinx_cdma_desc_hw *hw;
1478
1479 segment = list_first_entry(&head_desc->segments,
1480 struct xilinx_cdma_tx_segment,
1481 node);
1482
1483 hw = &segment->hw;
1484
1485 xilinx_write(chan, XILINX_CDMA_REG_SRCADDR,
1486 xilinx_prep_dma_addr_t(hw->src_addr));
1487 xilinx_write(chan, XILINX_CDMA_REG_DSTADDR,
1488 xilinx_prep_dma_addr_t(hw->dest_addr));
1489
1490 /* Start the transfer */
1491 dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
1492 hw->control & chan->xdev->max_buffer_len);
1493 }
1494
1495 list_splice_tail_init(&chan->pending_list, &chan->active_list);
1496 chan->desc_pendingcount = 0;
1497 chan->idle = false;
1498}
1499
1500/**
1501 * xilinx_dma_start_transfer - Starts DMA transfer
1502 * @chan: Driver specific channel struct pointer
1503 */
1504static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
1505{
1506 struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
1507 struct xilinx_axidma_tx_segment *tail_segment;
1508 u32 reg;
1509
1510 if (chan->err)
1511 return;
1512
1513 if (list_empty(&chan->pending_list))
1514 return;
1515
1516 if (!chan->idle)
1517 return;
1518
1519 head_desc = list_first_entry(&chan->pending_list,
1520 struct xilinx_dma_tx_descriptor, node);
1521 tail_desc = list_last_entry(&chan->pending_list,
1522 struct xilinx_dma_tx_descriptor, node);
1523 tail_segment = list_last_entry(&tail_desc->segments,
1524 struct xilinx_axidma_tx_segment, node);
1525
1526 reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
1527
1528 if (chan->desc_pendingcount <= XILINX_DMA_COALESCE_MAX) {
1529 reg &= ~XILINX_DMA_CR_COALESCE_MAX;
1530 reg |= chan->desc_pendingcount <<
1531 XILINX_DMA_CR_COALESCE_SHIFT;
1532 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
1533 }
1534
1535 if (chan->has_sg)
1536 xilinx_write(chan, XILINX_DMA_REG_CURDESC,
1537 head_desc->async_tx.phys);
1538
1539 xilinx_dma_start(chan);
1540
1541 if (chan->err)
1542 return;
1543
1544 /* Start the transfer */
1545 if (chan->has_sg) {
1546 if (chan->cyclic)
1547 xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
1548 chan->cyclic_seg_v->phys);
1549 else
1550 xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
1551 tail_segment->phys);
1552 } else {
1553 struct xilinx_axidma_tx_segment *segment;
1554 struct xilinx_axidma_desc_hw *hw;
1555
1556 segment = list_first_entry(&head_desc->segments,
1557 struct xilinx_axidma_tx_segment,
1558 node);
1559 hw = &segment->hw;
1560
1561 xilinx_write(chan, XILINX_DMA_REG_SRCDSTADDR,
1562 xilinx_prep_dma_addr_t(hw->buf_addr));
1563
1564 /* Start the transfer */
1565 dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
1566 hw->control & chan->xdev->max_buffer_len);
1567 }
1568
1569 list_splice_tail_init(&chan->pending_list, &chan->active_list);
1570 chan->desc_pendingcount = 0;
1571 chan->idle = false;
1572}
1573
1574/**
1575 * xilinx_mcdma_start_transfer - Starts MCDMA transfer
1576 * @chan: Driver specific channel struct pointer
1577 */
1578static void xilinx_mcdma_start_transfer(struct xilinx_dma_chan *chan)
1579{
1580 struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
1581 struct xilinx_aximcdma_tx_segment *tail_segment;
1582 u32 reg;
1583
1584 /*
1585 * lock has been held by calling functions, so we don't need it
1586 * to take it here again.
1587 */
1588
1589 if (chan->err)
1590 return;
1591
1592 if (!chan->idle)
1593 return;
1594
1595 if (list_empty(&chan->pending_list))
1596 return;
1597
1598 head_desc = list_first_entry(&chan->pending_list,
1599 struct xilinx_dma_tx_descriptor, node);
1600 tail_desc = list_last_entry(&chan->pending_list,
1601 struct xilinx_dma_tx_descriptor, node);
1602 tail_segment = list_last_entry(&tail_desc->segments,
1603 struct xilinx_aximcdma_tx_segment, node);
1604
1605 reg = dma_ctrl_read(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest));
1606
1607 if (chan->desc_pendingcount <= XILINX_MCDMA_COALESCE_MAX) {
1608 reg &= ~XILINX_MCDMA_COALESCE_MASK;
1609 reg |= chan->desc_pendingcount <<
1610 XILINX_MCDMA_COALESCE_SHIFT;
1611 }
1612
1613 reg |= XILINX_MCDMA_IRQ_ALL_MASK;
1614 dma_ctrl_write(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest), reg);
1615
1616 /* Program current descriptor */
1617 xilinx_write(chan, XILINX_MCDMA_CHAN_CDESC_OFFSET(chan->tdest),
1618 head_desc->async_tx.phys);
1619
1620 /* Program channel enable register */
1621 reg = dma_ctrl_read(chan, XILINX_MCDMA_CHEN_OFFSET);
1622 reg |= BIT(chan->tdest);
1623 dma_ctrl_write(chan, XILINX_MCDMA_CHEN_OFFSET, reg);
1624
1625 /* Start the fetch of BDs for the channel */
1626 reg = dma_ctrl_read(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest));
1627 reg |= XILINX_MCDMA_CR_RUNSTOP_MASK;
1628 dma_ctrl_write(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest), reg);
1629
1630 xilinx_dma_start(chan);
1631
1632 if (chan->err)
1633 return;
1634
1635 /* Start the transfer */
1636 xilinx_write(chan, XILINX_MCDMA_CHAN_TDESC_OFFSET(chan->tdest),
1637 tail_segment->phys);
1638
1639 list_splice_tail_init(&chan->pending_list, &chan->active_list);
1640 chan->desc_pendingcount = 0;
1641 chan->idle = false;
1642}
1643
1644/**
1645 * xilinx_dma_issue_pending - Issue pending transactions
1646 * @dchan: DMA channel
1647 */
1648static void xilinx_dma_issue_pending(struct dma_chan *dchan)
1649{
1650 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1651 unsigned long flags;
1652
1653 spin_lock_irqsave(&chan->lock, flags);
1654 chan->start_transfer(chan);
1655 spin_unlock_irqrestore(&chan->lock, flags);
1656}
1657
1658/**
1659 * xilinx_dma_device_config - Configure the DMA channel
1660 * @dchan: DMA channel
1661 * @config: channel configuration
1662 *
1663 * Return: 0 always.
1664 */
1665static int xilinx_dma_device_config(struct dma_chan *dchan,
1666 struct dma_slave_config *config)
1667{
1668 return 0;
1669}
1670
1671/**
1672 * xilinx_dma_complete_descriptor - Mark the active descriptor as complete
1673 * @chan : xilinx DMA channel
1674 *
1675 * CONTEXT: hardirq
1676 */
1677static void xilinx_dma_complete_descriptor(struct xilinx_dma_chan *chan)
1678{
1679 struct xilinx_dma_tx_descriptor *desc, *next;
1680
1681 /* This function was invoked with lock held */
1682 if (list_empty(&chan->active_list))
1683 return;
1684
1685 list_for_each_entry_safe(desc, next, &chan->active_list, node) {
1686 if (chan->has_sg && chan->xdev->dma_config->dmatype !=
1687 XDMA_TYPE_VDMA)
1688 desc->residue = xilinx_dma_get_residue(chan, desc);
1689 else
1690 desc->residue = 0;
1691 desc->err = chan->err;
1692
1693 list_del(&desc->node);
1694 if (!desc->cyclic)
1695 dma_cookie_complete(&desc->async_tx);
1696 list_add_tail(&desc->node, &chan->done_list);
1697 }
1698}
1699
1700/**
1701 * xilinx_dma_reset - Reset DMA channel
1702 * @chan: Driver specific DMA channel
1703 *
1704 * Return: '0' on success and failure value on error
1705 */
1706static int xilinx_dma_reset(struct xilinx_dma_chan *chan)
1707{
1708 int err;
1709 u32 tmp;
1710
1711 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RESET);
1712
1713 /* Wait for the hardware to finish reset */
1714 err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMACR, tmp,
1715 !(tmp & XILINX_DMA_DMACR_RESET), 0,
1716 XILINX_DMA_LOOP_COUNT);
1717
1718 if (err) {
1719 dev_err(chan->dev, "reset timeout, cr %x, sr %x\n",
1720 dma_ctrl_read(chan, XILINX_DMA_REG_DMACR),
1721 dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
1722 return -ETIMEDOUT;
1723 }
1724
1725 chan->err = false;
1726 chan->idle = true;
1727 chan->desc_pendingcount = 0;
1728 chan->desc_submitcount = 0;
1729
1730 return err;
1731}
1732
1733/**
1734 * xilinx_dma_chan_reset - Reset DMA channel and enable interrupts
1735 * @chan: Driver specific DMA channel
1736 *
1737 * Return: '0' on success and failure value on error
1738 */
1739static int xilinx_dma_chan_reset(struct xilinx_dma_chan *chan)
1740{
1741 int err;
1742
1743 /* Reset VDMA */
1744 err = xilinx_dma_reset(chan);
1745 if (err)
1746 return err;
1747
1748 /* Enable interrupts */
1749 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1750 XILINX_DMA_DMAXR_ALL_IRQ_MASK);
1751
1752 return 0;
1753}
1754
1755/**
1756 * xilinx_mcdma_irq_handler - MCDMA Interrupt handler
1757 * @irq: IRQ number
1758 * @data: Pointer to the Xilinx MCDMA channel structure
1759 *
1760 * Return: IRQ_HANDLED/IRQ_NONE
1761 */
1762static irqreturn_t xilinx_mcdma_irq_handler(int irq, void *data)
1763{
1764 struct xilinx_dma_chan *chan = data;
1765 u32 status, ser_offset, chan_sermask, chan_offset = 0, chan_id;
1766
1767 if (chan->direction == DMA_DEV_TO_MEM)
1768 ser_offset = XILINX_MCDMA_RXINT_SER_OFFSET;
1769 else
1770 ser_offset = XILINX_MCDMA_TXINT_SER_OFFSET;
1771
1772 /* Read the channel id raising the interrupt*/
1773 chan_sermask = dma_ctrl_read(chan, ser_offset);
1774 chan_id = ffs(chan_sermask);
1775
1776 if (!chan_id)
1777 return IRQ_NONE;
1778
1779 if (chan->direction == DMA_DEV_TO_MEM)
1780 chan_offset = chan->xdev->dma_config->max_channels / 2;
1781
1782 chan_offset = chan_offset + (chan_id - 1);
1783 chan = chan->xdev->chan[chan_offset];
1784 /* Read the status and ack the interrupts. */
1785 status = dma_ctrl_read(chan, XILINX_MCDMA_CHAN_SR_OFFSET(chan->tdest));
1786 if (!(status & XILINX_MCDMA_IRQ_ALL_MASK))
1787 return IRQ_NONE;
1788
1789 dma_ctrl_write(chan, XILINX_MCDMA_CHAN_SR_OFFSET(chan->tdest),
1790 status & XILINX_MCDMA_IRQ_ALL_MASK);
1791
1792 if (status & XILINX_MCDMA_IRQ_ERR_MASK) {
1793 dev_err(chan->dev, "Channel %p has errors %x cdr %x tdr %x\n",
1794 chan,
1795 dma_ctrl_read(chan, XILINX_MCDMA_CH_ERR_OFFSET),
1796 dma_ctrl_read(chan, XILINX_MCDMA_CHAN_CDESC_OFFSET
1797 (chan->tdest)),
1798 dma_ctrl_read(chan, XILINX_MCDMA_CHAN_TDESC_OFFSET
1799 (chan->tdest)));
1800 chan->err = true;
1801 }
1802
1803 if (status & XILINX_MCDMA_IRQ_DELAY_MASK) {
1804 /*
1805 * Device takes too long to do the transfer when user requires
1806 * responsiveness.
1807 */
1808 dev_dbg(chan->dev, "Inter-packet latency too long\n");
1809 }
1810
1811 if (status & XILINX_MCDMA_IRQ_IOC_MASK) {
1812 spin_lock(&chan->lock);
1813 xilinx_dma_complete_descriptor(chan);
1814 chan->idle = true;
1815 chan->start_transfer(chan);
1816 spin_unlock(&chan->lock);
1817 }
1818
1819 tasklet_schedule(&chan->tasklet);
1820 return IRQ_HANDLED;
1821}
1822
1823/**
1824 * xilinx_dma_irq_handler - DMA Interrupt handler
1825 * @irq: IRQ number
1826 * @data: Pointer to the Xilinx DMA channel structure
1827 *
1828 * Return: IRQ_HANDLED/IRQ_NONE
1829 */
1830static irqreturn_t xilinx_dma_irq_handler(int irq, void *data)
1831{
1832 struct xilinx_dma_chan *chan = data;
1833 u32 status;
1834
1835 /* Read the status and ack the interrupts. */
1836 status = dma_ctrl_read(chan, XILINX_DMA_REG_DMASR);
1837 if (!(status & XILINX_DMA_DMAXR_ALL_IRQ_MASK))
1838 return IRQ_NONE;
1839
1840 dma_ctrl_write(chan, XILINX_DMA_REG_DMASR,
1841 status & XILINX_DMA_DMAXR_ALL_IRQ_MASK);
1842
1843 if (status & XILINX_DMA_DMASR_ERR_IRQ) {
1844 /*
1845 * An error occurred. If C_FLUSH_ON_FSYNC is enabled and the
1846 * error is recoverable, ignore it. Otherwise flag the error.
1847 *
1848 * Only recoverable errors can be cleared in the DMASR register,
1849 * make sure not to write to other error bits to 1.
1850 */
1851 u32 errors = status & XILINX_DMA_DMASR_ALL_ERR_MASK;
1852
1853 dma_ctrl_write(chan, XILINX_DMA_REG_DMASR,
1854 errors & XILINX_DMA_DMASR_ERR_RECOVER_MASK);
1855
1856 if (!chan->flush_on_fsync ||
1857 (errors & ~XILINX_DMA_DMASR_ERR_RECOVER_MASK)) {
1858 dev_err(chan->dev,
1859 "Channel %p has errors %x, cdr %x tdr %x\n",
1860 chan, errors,
1861 dma_ctrl_read(chan, XILINX_DMA_REG_CURDESC),
1862 dma_ctrl_read(chan, XILINX_DMA_REG_TAILDESC));
1863 chan->err = true;
1864 }
1865 }
1866
1867 if (status & XILINX_DMA_DMASR_DLY_CNT_IRQ) {
1868 /*
1869 * Device takes too long to do the transfer when user requires
1870 * responsiveness.
1871 */
1872 dev_dbg(chan->dev, "Inter-packet latency too long\n");
1873 }
1874
1875 if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) {
1876 spin_lock(&chan->lock);
1877 xilinx_dma_complete_descriptor(chan);
1878 chan->idle = true;
1879 chan->start_transfer(chan);
1880 spin_unlock(&chan->lock);
1881 }
1882
1883 tasklet_schedule(&chan->tasklet);
1884 return IRQ_HANDLED;
1885}
1886
1887/**
1888 * append_desc_queue - Queuing descriptor
1889 * @chan: Driver specific dma channel
1890 * @desc: dma transaction descriptor
1891 */
1892static void append_desc_queue(struct xilinx_dma_chan *chan,
1893 struct xilinx_dma_tx_descriptor *desc)
1894{
1895 struct xilinx_vdma_tx_segment *tail_segment;
1896 struct xilinx_dma_tx_descriptor *tail_desc;
1897 struct xilinx_axidma_tx_segment *axidma_tail_segment;
1898 struct xilinx_aximcdma_tx_segment *aximcdma_tail_segment;
1899 struct xilinx_cdma_tx_segment *cdma_tail_segment;
1900
1901 if (list_empty(&chan->pending_list))
1902 goto append;
1903
1904 /*
1905 * Add the hardware descriptor to the chain of hardware descriptors
1906 * that already exists in memory.
1907 */
1908 tail_desc = list_last_entry(&chan->pending_list,
1909 struct xilinx_dma_tx_descriptor, node);
1910 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
1911 tail_segment = list_last_entry(&tail_desc->segments,
1912 struct xilinx_vdma_tx_segment,
1913 node);
1914 tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
1915 } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
1916 cdma_tail_segment = list_last_entry(&tail_desc->segments,
1917 struct xilinx_cdma_tx_segment,
1918 node);
1919 cdma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
1920 } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
1921 axidma_tail_segment = list_last_entry(&tail_desc->segments,
1922 struct xilinx_axidma_tx_segment,
1923 node);
1924 axidma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
1925 } else {
1926 aximcdma_tail_segment =
1927 list_last_entry(&tail_desc->segments,
1928 struct xilinx_aximcdma_tx_segment,
1929 node);
1930 aximcdma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
1931 }
1932
1933 /*
1934 * Add the software descriptor and all children to the list
1935 * of pending transactions
1936 */
1937append:
1938 list_add_tail(&desc->node, &chan->pending_list);
1939 chan->desc_pendingcount++;
1940
1941 if (chan->has_sg && (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA)
1942 && unlikely(chan->desc_pendingcount > chan->num_frms)) {
1943 dev_dbg(chan->dev, "desc pendingcount is too high\n");
1944 chan->desc_pendingcount = chan->num_frms;
1945 }
1946}
1947
1948/**
1949 * xilinx_dma_tx_submit - Submit DMA transaction
1950 * @tx: Async transaction descriptor
1951 *
1952 * Return: cookie value on success and failure value on error
1953 */
1954static dma_cookie_t xilinx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
1955{
1956 struct xilinx_dma_tx_descriptor *desc = to_dma_tx_descriptor(tx);
1957 struct xilinx_dma_chan *chan = to_xilinx_chan(tx->chan);
1958 dma_cookie_t cookie;
1959 unsigned long flags;
1960 int err;
1961
1962 if (chan->cyclic) {
1963 xilinx_dma_free_tx_descriptor(chan, desc);
1964 return -EBUSY;
1965 }
1966
1967 if (chan->err) {
1968 /*
1969 * If reset fails, need to hard reset the system.
1970 * Channel is no longer functional
1971 */
1972 err = xilinx_dma_chan_reset(chan);
1973 if (err < 0)
1974 return err;
1975 }
1976
1977 spin_lock_irqsave(&chan->lock, flags);
1978
1979 cookie = dma_cookie_assign(tx);
1980
1981 /* Put this transaction onto the tail of the pending queue */
1982 append_desc_queue(chan, desc);
1983
1984 if (desc->cyclic)
1985 chan->cyclic = true;
1986
1987 chan->terminating = false;
1988
1989 spin_unlock_irqrestore(&chan->lock, flags);
1990
1991 return cookie;
1992}
1993
1994/**
1995 * xilinx_vdma_dma_prep_interleaved - prepare a descriptor for a
1996 * DMA_SLAVE transaction
1997 * @dchan: DMA channel
1998 * @xt: Interleaved template pointer
1999 * @flags: transfer ack flags
2000 *
2001 * Return: Async transaction descriptor on success and NULL on failure
2002 */
2003static struct dma_async_tx_descriptor *
2004xilinx_vdma_dma_prep_interleaved(struct dma_chan *dchan,
2005 struct dma_interleaved_template *xt,
2006 unsigned long flags)
2007{
2008 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2009 struct xilinx_dma_tx_descriptor *desc;
2010 struct xilinx_vdma_tx_segment *segment;
2011 struct xilinx_vdma_desc_hw *hw;
2012
2013 if (!is_slave_direction(xt->dir))
2014 return NULL;
2015
2016 if (!xt->numf || !xt->sgl[0].size)
2017 return NULL;
2018
2019 if (xt->frame_size != 1)
2020 return NULL;
2021
2022 /* Allocate a transaction descriptor. */
2023 desc = xilinx_dma_alloc_tx_descriptor(chan);
2024 if (!desc)
2025 return NULL;
2026
2027 dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2028 desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2029 async_tx_ack(&desc->async_tx);
2030
2031 /* Allocate the link descriptor from DMA pool */
2032 segment = xilinx_vdma_alloc_tx_segment(chan);
2033 if (!segment)
2034 goto error;
2035
2036 /* Fill in the hardware descriptor */
2037 hw = &segment->hw;
2038 hw->vsize = xt->numf;
2039 hw->hsize = xt->sgl[0].size;
2040 hw->stride = (xt->sgl[0].icg + xt->sgl[0].size) <<
2041 XILINX_DMA_FRMDLY_STRIDE_STRIDE_SHIFT;
2042 hw->stride |= chan->config.frm_dly <<
2043 XILINX_DMA_FRMDLY_STRIDE_FRMDLY_SHIFT;
2044
2045 if (xt->dir != DMA_MEM_TO_DEV) {
2046 if (chan->ext_addr) {
2047 hw->buf_addr = lower_32_bits(xt->dst_start);
2048 hw->buf_addr_msb = upper_32_bits(xt->dst_start);
2049 } else {
2050 hw->buf_addr = xt->dst_start;
2051 }
2052 } else {
2053 if (chan->ext_addr) {
2054 hw->buf_addr = lower_32_bits(xt->src_start);
2055 hw->buf_addr_msb = upper_32_bits(xt->src_start);
2056 } else {
2057 hw->buf_addr = xt->src_start;
2058 }
2059 }
2060
2061 /* Insert the segment into the descriptor segments list. */
2062 list_add_tail(&segment->node, &desc->segments);
2063
2064 /* Link the last hardware descriptor with the first. */
2065 segment = list_first_entry(&desc->segments,
2066 struct xilinx_vdma_tx_segment, node);
2067 desc->async_tx.phys = segment->phys;
2068
2069 return &desc->async_tx;
2070
2071error:
2072 xilinx_dma_free_tx_descriptor(chan, desc);
2073 return NULL;
2074}
2075
2076/**
2077 * xilinx_cdma_prep_memcpy - prepare descriptors for a memcpy transaction
2078 * @dchan: DMA channel
2079 * @dma_dst: destination address
2080 * @dma_src: source address
2081 * @len: transfer length
2082 * @flags: transfer ack flags
2083 *
2084 * Return: Async transaction descriptor on success and NULL on failure
2085 */
2086static struct dma_async_tx_descriptor *
2087xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
2088 dma_addr_t dma_src, size_t len, unsigned long flags)
2089{
2090 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2091 struct xilinx_dma_tx_descriptor *desc;
2092 struct xilinx_cdma_tx_segment *segment;
2093 struct xilinx_cdma_desc_hw *hw;
2094
2095 if (!len || len > chan->xdev->max_buffer_len)
2096 return NULL;
2097
2098 desc = xilinx_dma_alloc_tx_descriptor(chan);
2099 if (!desc)
2100 return NULL;
2101
2102 dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2103 desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2104
2105 /* Allocate the link descriptor from DMA pool */
2106 segment = xilinx_cdma_alloc_tx_segment(chan);
2107 if (!segment)
2108 goto error;
2109
2110 hw = &segment->hw;
2111 hw->control = len;
2112 hw->src_addr = dma_src;
2113 hw->dest_addr = dma_dst;
2114 if (chan->ext_addr) {
2115 hw->src_addr_msb = upper_32_bits(dma_src);
2116 hw->dest_addr_msb = upper_32_bits(dma_dst);
2117 }
2118
2119 /* Insert the segment into the descriptor segments list. */
2120 list_add_tail(&segment->node, &desc->segments);
2121
2122 desc->async_tx.phys = segment->phys;
2123 hw->next_desc = segment->phys;
2124
2125 return &desc->async_tx;
2126
2127error:
2128 xilinx_dma_free_tx_descriptor(chan, desc);
2129 return NULL;
2130}
2131
2132/**
2133 * xilinx_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
2134 * @dchan: DMA channel
2135 * @sgl: scatterlist to transfer to/from
2136 * @sg_len: number of entries in @scatterlist
2137 * @direction: DMA direction
2138 * @flags: transfer ack flags
2139 * @context: APP words of the descriptor
2140 *
2141 * Return: Async transaction descriptor on success and NULL on failure
2142 */
2143static struct dma_async_tx_descriptor *xilinx_dma_prep_slave_sg(
2144 struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len,
2145 enum dma_transfer_direction direction, unsigned long flags,
2146 void *context)
2147{
2148 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2149 struct xilinx_dma_tx_descriptor *desc;
2150 struct xilinx_axidma_tx_segment *segment = NULL;
2151 u32 *app_w = (u32 *)context;
2152 struct scatterlist *sg;
2153 size_t copy;
2154 size_t sg_used;
2155 unsigned int i;
2156
2157 if (!is_slave_direction(direction))
2158 return NULL;
2159
2160 /* Allocate a transaction descriptor. */
2161 desc = xilinx_dma_alloc_tx_descriptor(chan);
2162 if (!desc)
2163 return NULL;
2164
2165 dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2166 desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2167
2168 /* Build transactions using information in the scatter gather list */
2169 for_each_sg(sgl, sg, sg_len, i) {
2170 sg_used = 0;
2171
2172 /* Loop until the entire scatterlist entry is used */
2173 while (sg_used < sg_dma_len(sg)) {
2174 struct xilinx_axidma_desc_hw *hw;
2175
2176 /* Get a free segment */
2177 segment = xilinx_axidma_alloc_tx_segment(chan);
2178 if (!segment)
2179 goto error;
2180
2181 /*
2182 * Calculate the maximum number of bytes to transfer,
2183 * making sure it is less than the hw limit
2184 */
2185 copy = xilinx_dma_calc_copysize(chan, sg_dma_len(sg),
2186 sg_used);
2187 hw = &segment->hw;
2188
2189 /* Fill in the descriptor */
2190 xilinx_axidma_buf(chan, hw, sg_dma_address(sg),
2191 sg_used, 0);
2192
2193 hw->control = copy;
2194
2195 if (chan->direction == DMA_MEM_TO_DEV) {
2196 if (app_w)
2197 memcpy(hw->app, app_w, sizeof(u32) *
2198 XILINX_DMA_NUM_APP_WORDS);
2199 }
2200
2201 sg_used += copy;
2202
2203 /*
2204 * Insert the segment into the descriptor segments
2205 * list.
2206 */
2207 list_add_tail(&segment->node, &desc->segments);
2208 }
2209 }
2210
2211 segment = list_first_entry(&desc->segments,
2212 struct xilinx_axidma_tx_segment, node);
2213 desc->async_tx.phys = segment->phys;
2214
2215 /* For the last DMA_MEM_TO_DEV transfer, set EOP */
2216 if (chan->direction == DMA_MEM_TO_DEV) {
2217 segment->hw.control |= XILINX_DMA_BD_SOP;
2218 segment = list_last_entry(&desc->segments,
2219 struct xilinx_axidma_tx_segment,
2220 node);
2221 segment->hw.control |= XILINX_DMA_BD_EOP;
2222 }
2223
2224 return &desc->async_tx;
2225
2226error:
2227 xilinx_dma_free_tx_descriptor(chan, desc);
2228 return NULL;
2229}
2230
2231/**
2232 * xilinx_dma_prep_dma_cyclic - prepare descriptors for a DMA_SLAVE transaction
2233 * @dchan: DMA channel
2234 * @buf_addr: Physical address of the buffer
2235 * @buf_len: Total length of the cyclic buffers
2236 * @period_len: length of individual cyclic buffer
2237 * @direction: DMA direction
2238 * @flags: transfer ack flags
2239 *
2240 * Return: Async transaction descriptor on success and NULL on failure
2241 */
2242static struct dma_async_tx_descriptor *xilinx_dma_prep_dma_cyclic(
2243 struct dma_chan *dchan, dma_addr_t buf_addr, size_t buf_len,
2244 size_t period_len, enum dma_transfer_direction direction,
2245 unsigned long flags)
2246{
2247 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2248 struct xilinx_dma_tx_descriptor *desc;
2249 struct xilinx_axidma_tx_segment *segment, *head_segment, *prev = NULL;
2250 size_t copy, sg_used;
2251 unsigned int num_periods;
2252 int i;
2253 u32 reg;
2254
2255 if (!period_len)
2256 return NULL;
2257
2258 num_periods = buf_len / period_len;
2259
2260 if (!num_periods)
2261 return NULL;
2262
2263 if (!is_slave_direction(direction))
2264 return NULL;
2265
2266 /* Allocate a transaction descriptor. */
2267 desc = xilinx_dma_alloc_tx_descriptor(chan);
2268 if (!desc)
2269 return NULL;
2270
2271 chan->direction = direction;
2272 dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2273 desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2274
2275 for (i = 0; i < num_periods; ++i) {
2276 sg_used = 0;
2277
2278 while (sg_used < period_len) {
2279 struct xilinx_axidma_desc_hw *hw;
2280
2281 /* Get a free segment */
2282 segment = xilinx_axidma_alloc_tx_segment(chan);
2283 if (!segment)
2284 goto error;
2285
2286 /*
2287 * Calculate the maximum number of bytes to transfer,
2288 * making sure it is less than the hw limit
2289 */
2290 copy = xilinx_dma_calc_copysize(chan, period_len,
2291 sg_used);
2292 hw = &segment->hw;
2293 xilinx_axidma_buf(chan, hw, buf_addr, sg_used,
2294 period_len * i);
2295 hw->control = copy;
2296
2297 if (prev)
2298 prev->hw.next_desc = segment->phys;
2299
2300 prev = segment;
2301 sg_used += copy;
2302
2303 /*
2304 * Insert the segment into the descriptor segments
2305 * list.
2306 */
2307 list_add_tail(&segment->node, &desc->segments);
2308 }
2309 }
2310
2311 head_segment = list_first_entry(&desc->segments,
2312 struct xilinx_axidma_tx_segment, node);
2313 desc->async_tx.phys = head_segment->phys;
2314
2315 desc->cyclic = true;
2316 reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
2317 reg |= XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
2318 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
2319
2320 segment = list_last_entry(&desc->segments,
2321 struct xilinx_axidma_tx_segment,
2322 node);
2323 segment->hw.next_desc = (u32) head_segment->phys;
2324
2325 /* For the last DMA_MEM_TO_DEV transfer, set EOP */
2326 if (direction == DMA_MEM_TO_DEV) {
2327 head_segment->hw.control |= XILINX_DMA_BD_SOP;
2328 segment->hw.control |= XILINX_DMA_BD_EOP;
2329 }
2330
2331 return &desc->async_tx;
2332
2333error:
2334 xilinx_dma_free_tx_descriptor(chan, desc);
2335 return NULL;
2336}
2337
2338/**
2339 * xilinx_mcdma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
2340 * @dchan: DMA channel
2341 * @sgl: scatterlist to transfer to/from
2342 * @sg_len: number of entries in @scatterlist
2343 * @direction: DMA direction
2344 * @flags: transfer ack flags
2345 * @context: APP words of the descriptor
2346 *
2347 * Return: Async transaction descriptor on success and NULL on failure
2348 */
2349static struct dma_async_tx_descriptor *
2350xilinx_mcdma_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
2351 unsigned int sg_len,
2352 enum dma_transfer_direction direction,
2353 unsigned long flags, void *context)
2354{
2355 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2356 struct xilinx_dma_tx_descriptor *desc;
2357 struct xilinx_aximcdma_tx_segment *segment = NULL;
2358 u32 *app_w = (u32 *)context;
2359 struct scatterlist *sg;
2360 size_t copy;
2361 size_t sg_used;
2362 unsigned int i;
2363
2364 if (!is_slave_direction(direction))
2365 return NULL;
2366
2367 /* Allocate a transaction descriptor. */
2368 desc = xilinx_dma_alloc_tx_descriptor(chan);
2369 if (!desc)
2370 return NULL;
2371
2372 dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2373 desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2374
2375 /* Build transactions using information in the scatter gather list */
2376 for_each_sg(sgl, sg, sg_len, i) {
2377 sg_used = 0;
2378
2379 /* Loop until the entire scatterlist entry is used */
2380 while (sg_used < sg_dma_len(sg)) {
2381 struct xilinx_aximcdma_desc_hw *hw;
2382
2383 /* Get a free segment */
2384 segment = xilinx_aximcdma_alloc_tx_segment(chan);
2385 if (!segment)
2386 goto error;
2387
2388 /*
2389 * Calculate the maximum number of bytes to transfer,
2390 * making sure it is less than the hw limit
2391 */
2392 copy = min_t(size_t, sg_dma_len(sg) - sg_used,
2393 chan->xdev->max_buffer_len);
2394 hw = &segment->hw;
2395
2396 /* Fill in the descriptor */
2397 xilinx_aximcdma_buf(chan, hw, sg_dma_address(sg),
2398 sg_used);
2399 hw->control = copy;
2400
2401 if (chan->direction == DMA_MEM_TO_DEV && app_w) {
2402 memcpy(hw->app, app_w, sizeof(u32) *
2403 XILINX_DMA_NUM_APP_WORDS);
2404 }
2405
2406 sg_used += copy;
2407 /*
2408 * Insert the segment into the descriptor segments
2409 * list.
2410 */
2411 list_add_tail(&segment->node, &desc->segments);
2412 }
2413 }
2414
2415 segment = list_first_entry(&desc->segments,
2416 struct xilinx_aximcdma_tx_segment, node);
2417 desc->async_tx.phys = segment->phys;
2418
2419 /* For the last DMA_MEM_TO_DEV transfer, set EOP */
2420 if (chan->direction == DMA_MEM_TO_DEV) {
2421 segment->hw.control |= XILINX_MCDMA_BD_SOP;
2422 segment = list_last_entry(&desc->segments,
2423 struct xilinx_aximcdma_tx_segment,
2424 node);
2425 segment->hw.control |= XILINX_MCDMA_BD_EOP;
2426 }
2427
2428 return &desc->async_tx;
2429
2430error:
2431 xilinx_dma_free_tx_descriptor(chan, desc);
2432
2433 return NULL;
2434}
2435
2436/**
2437 * xilinx_dma_terminate_all - Halt the channel and free descriptors
2438 * @dchan: Driver specific DMA Channel pointer
2439 *
2440 * Return: '0' always.
2441 */
2442static int xilinx_dma_terminate_all(struct dma_chan *dchan)
2443{
2444 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2445 u32 reg;
2446 int err;
2447
2448 if (!chan->cyclic) {
2449 err = chan->stop_transfer(chan);
2450 if (err) {
2451 dev_err(chan->dev, "Cannot stop channel %p: %x\n",
2452 chan, dma_ctrl_read(chan,
2453 XILINX_DMA_REG_DMASR));
2454 chan->err = true;
2455 }
2456 }
2457
2458 xilinx_dma_chan_reset(chan);
2459 /* Remove and free all of the descriptors in the lists */
2460 chan->terminating = true;
2461 xilinx_dma_free_descriptors(chan);
2462 chan->idle = true;
2463
2464 if (chan->cyclic) {
2465 reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
2466 reg &= ~XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
2467 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
2468 chan->cyclic = false;
2469 }
2470
2471 if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
2472 dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
2473 XILINX_CDMA_CR_SGMODE);
2474
2475 return 0;
2476}
2477
2478static void xilinx_dma_synchronize(struct dma_chan *dchan)
2479{
2480 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2481
2482 tasklet_kill(&chan->tasklet);
2483}
2484
2485/**
2486 * xilinx_vdma_channel_set_config - Configure VDMA channel
2487 * Run-time configuration for Axi VDMA, supports:
2488 * . halt the channel
2489 * . configure interrupt coalescing and inter-packet delay threshold
2490 * . start/stop parking
2491 * . enable genlock
2492 *
2493 * @dchan: DMA channel
2494 * @cfg: VDMA device configuration pointer
2495 *
2496 * Return: '0' on success and failure value on error
2497 */
2498int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
2499 struct xilinx_vdma_config *cfg)
2500{
2501 struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2502 u32 dmacr;
2503
2504 if (cfg->reset)
2505 return xilinx_dma_chan_reset(chan);
2506
2507 dmacr = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
2508
2509 chan->config.frm_dly = cfg->frm_dly;
2510 chan->config.park = cfg->park;
2511
2512 /* genlock settings */
2513 chan->config.gen_lock = cfg->gen_lock;
2514 chan->config.master = cfg->master;
2515
2516 dmacr &= ~XILINX_DMA_DMACR_GENLOCK_EN;
2517 if (cfg->gen_lock && chan->genlock) {
2518 dmacr |= XILINX_DMA_DMACR_GENLOCK_EN;
2519 dmacr &= ~XILINX_DMA_DMACR_MASTER_MASK;
2520 dmacr |= cfg->master << XILINX_DMA_DMACR_MASTER_SHIFT;
2521 }
2522
2523 chan->config.frm_cnt_en = cfg->frm_cnt_en;
2524 chan->config.vflip_en = cfg->vflip_en;
2525
2526 if (cfg->park)
2527 chan->config.park_frm = cfg->park_frm;
2528 else
2529 chan->config.park_frm = -1;
2530
2531 chan->config.coalesc = cfg->coalesc;
2532 chan->config.delay = cfg->delay;
2533
2534 if (cfg->coalesc <= XILINX_DMA_DMACR_FRAME_COUNT_MAX) {
2535 dmacr &= ~XILINX_DMA_DMACR_FRAME_COUNT_MASK;
2536 dmacr |= cfg->coalesc << XILINX_DMA_DMACR_FRAME_COUNT_SHIFT;
2537 chan->config.coalesc = cfg->coalesc;
2538 }
2539
2540 if (cfg->delay <= XILINX_DMA_DMACR_DELAY_MAX) {
2541 dmacr &= ~XILINX_DMA_DMACR_DELAY_MASK;
2542 dmacr |= cfg->delay << XILINX_DMA_DMACR_DELAY_SHIFT;
2543 chan->config.delay = cfg->delay;
2544 }
2545
2546 /* FSync Source selection */
2547 dmacr &= ~XILINX_DMA_DMACR_FSYNCSRC_MASK;
2548 dmacr |= cfg->ext_fsync << XILINX_DMA_DMACR_FSYNCSRC_SHIFT;
2549
2550 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, dmacr);
2551
2552 return 0;
2553}
2554EXPORT_SYMBOL(xilinx_vdma_channel_set_config);
2555
2556/* -----------------------------------------------------------------------------
2557 * Probe and remove
2558 */
2559
2560/**
2561 * xilinx_dma_chan_remove - Per Channel remove function
2562 * @chan: Driver specific DMA channel
2563 */
2564static void xilinx_dma_chan_remove(struct xilinx_dma_chan *chan)
2565{
2566 /* Disable all interrupts */
2567 dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
2568 XILINX_DMA_DMAXR_ALL_IRQ_MASK);
2569
2570 if (chan->irq > 0)
2571 free_irq(chan->irq, chan);
2572
2573 tasklet_kill(&chan->tasklet);
2574
2575 list_del(&chan->common.device_node);
2576}
2577
2578static int axidma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
2579 struct clk **tx_clk, struct clk **rx_clk,
2580 struct clk **sg_clk, struct clk **tmp_clk)
2581{
2582 int err;
2583
2584 *tmp_clk = NULL;
2585
2586 *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
2587 if (IS_ERR(*axi_clk))
2588 return dev_err_probe(&pdev->dev, PTR_ERR(*axi_clk), "failed to get axi_aclk\n");
2589
2590 *tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
2591 if (IS_ERR(*tx_clk))
2592 *tx_clk = NULL;
2593
2594 *rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
2595 if (IS_ERR(*rx_clk))
2596 *rx_clk = NULL;
2597
2598 *sg_clk = devm_clk_get(&pdev->dev, "m_axi_sg_aclk");
2599 if (IS_ERR(*sg_clk))
2600 *sg_clk = NULL;
2601
2602 err = clk_prepare_enable(*axi_clk);
2603 if (err) {
2604 dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
2605 return err;
2606 }
2607
2608 err = clk_prepare_enable(*tx_clk);
2609 if (err) {
2610 dev_err(&pdev->dev, "failed to enable tx_clk (%d)\n", err);
2611 goto err_disable_axiclk;
2612 }
2613
2614 err = clk_prepare_enable(*rx_clk);
2615 if (err) {
2616 dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err);
2617 goto err_disable_txclk;
2618 }
2619
2620 err = clk_prepare_enable(*sg_clk);
2621 if (err) {
2622 dev_err(&pdev->dev, "failed to enable sg_clk (%d)\n", err);
2623 goto err_disable_rxclk;
2624 }
2625
2626 return 0;
2627
2628err_disable_rxclk:
2629 clk_disable_unprepare(*rx_clk);
2630err_disable_txclk:
2631 clk_disable_unprepare(*tx_clk);
2632err_disable_axiclk:
2633 clk_disable_unprepare(*axi_clk);
2634
2635 return err;
2636}
2637
2638static int axicdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
2639 struct clk **dev_clk, struct clk **tmp_clk,
2640 struct clk **tmp1_clk, struct clk **tmp2_clk)
2641{
2642 int err;
2643
2644 *tmp_clk = NULL;
2645 *tmp1_clk = NULL;
2646 *tmp2_clk = NULL;
2647
2648 *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
2649 if (IS_ERR(*axi_clk))
2650 return dev_err_probe(&pdev->dev, PTR_ERR(*axi_clk), "failed to get axi_aclk\n");
2651
2652 *dev_clk = devm_clk_get(&pdev->dev, "m_axi_aclk");
2653 if (IS_ERR(*dev_clk))
2654 return dev_err_probe(&pdev->dev, PTR_ERR(*dev_clk), "failed to get dev_clk\n");
2655
2656 err = clk_prepare_enable(*axi_clk);
2657 if (err) {
2658 dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
2659 return err;
2660 }
2661
2662 err = clk_prepare_enable(*dev_clk);
2663 if (err) {
2664 dev_err(&pdev->dev, "failed to enable dev_clk (%d)\n", err);
2665 goto err_disable_axiclk;
2666 }
2667
2668 return 0;
2669
2670err_disable_axiclk:
2671 clk_disable_unprepare(*axi_clk);
2672
2673 return err;
2674}
2675
2676static int axivdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
2677 struct clk **tx_clk, struct clk **txs_clk,
2678 struct clk **rx_clk, struct clk **rxs_clk)
2679{
2680 int err;
2681
2682 *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
2683 if (IS_ERR(*axi_clk))
2684 return dev_err_probe(&pdev->dev, PTR_ERR(*axi_clk), "failed to get axi_aclk\n");
2685
2686 *tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
2687 if (IS_ERR(*tx_clk))
2688 *tx_clk = NULL;
2689
2690 *txs_clk = devm_clk_get(&pdev->dev, "m_axis_mm2s_aclk");
2691 if (IS_ERR(*txs_clk))
2692 *txs_clk = NULL;
2693
2694 *rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
2695 if (IS_ERR(*rx_clk))
2696 *rx_clk = NULL;
2697
2698 *rxs_clk = devm_clk_get(&pdev->dev, "s_axis_s2mm_aclk");
2699 if (IS_ERR(*rxs_clk))
2700 *rxs_clk = NULL;
2701
2702 err = clk_prepare_enable(*axi_clk);
2703 if (err) {
2704 dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n",
2705 err);
2706 return err;
2707 }
2708
2709 err = clk_prepare_enable(*tx_clk);
2710 if (err) {
2711 dev_err(&pdev->dev, "failed to enable tx_clk (%d)\n", err);
2712 goto err_disable_axiclk;
2713 }
2714
2715 err = clk_prepare_enable(*txs_clk);
2716 if (err) {
2717 dev_err(&pdev->dev, "failed to enable txs_clk (%d)\n", err);
2718 goto err_disable_txclk;
2719 }
2720
2721 err = clk_prepare_enable(*rx_clk);
2722 if (err) {
2723 dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err);
2724 goto err_disable_txsclk;
2725 }
2726
2727 err = clk_prepare_enable(*rxs_clk);
2728 if (err) {
2729 dev_err(&pdev->dev, "failed to enable rxs_clk (%d)\n", err);
2730 goto err_disable_rxclk;
2731 }
2732
2733 return 0;
2734
2735err_disable_rxclk:
2736 clk_disable_unprepare(*rx_clk);
2737err_disable_txsclk:
2738 clk_disable_unprepare(*txs_clk);
2739err_disable_txclk:
2740 clk_disable_unprepare(*tx_clk);
2741err_disable_axiclk:
2742 clk_disable_unprepare(*axi_clk);
2743
2744 return err;
2745}
2746
2747static void xdma_disable_allclks(struct xilinx_dma_device *xdev)
2748{
2749 clk_disable_unprepare(xdev->rxs_clk);
2750 clk_disable_unprepare(xdev->rx_clk);
2751 clk_disable_unprepare(xdev->txs_clk);
2752 clk_disable_unprepare(xdev->tx_clk);
2753 clk_disable_unprepare(xdev->axi_clk);
2754}
2755
2756/**
2757 * xilinx_dma_chan_probe - Per Channel Probing
2758 * It get channel features from the device tree entry and
2759 * initialize special channel handling routines
2760 *
2761 * @xdev: Driver specific device structure
2762 * @node: Device node
2763 *
2764 * Return: '0' on success and failure value on error
2765 */
2766static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
2767 struct device_node *node)
2768{
2769 struct xilinx_dma_chan *chan;
2770 bool has_dre = false;
2771 u32 value, width;
2772 int err;
2773
2774 /* Allocate and initialize the channel structure */
2775 chan = devm_kzalloc(xdev->dev, sizeof(*chan), GFP_KERNEL);
2776 if (!chan)
2777 return -ENOMEM;
2778
2779 chan->dev = xdev->dev;
2780 chan->xdev = xdev;
2781 chan->desc_pendingcount = 0x0;
2782 chan->ext_addr = xdev->ext_addr;
2783 /* This variable ensures that descriptors are not
2784 * Submitted when dma engine is in progress. This variable is
2785 * Added to avoid polling for a bit in the status register to
2786 * Know dma state in the driver hot path.
2787 */
2788 chan->idle = true;
2789
2790 spin_lock_init(&chan->lock);
2791 INIT_LIST_HEAD(&chan->pending_list);
2792 INIT_LIST_HEAD(&chan->done_list);
2793 INIT_LIST_HEAD(&chan->active_list);
2794 INIT_LIST_HEAD(&chan->free_seg_list);
2795
2796 /* Retrieve the channel properties from the device tree */
2797 has_dre = of_property_read_bool(node, "xlnx,include-dre");
2798
2799 chan->genlock = of_property_read_bool(node, "xlnx,genlock-mode");
2800
2801 err = of_property_read_u32(node, "xlnx,datawidth", &value);
2802 if (err) {
2803 dev_err(xdev->dev, "missing xlnx,datawidth property\n");
2804 return err;
2805 }
2806 width = value >> 3; /* Convert bits to bytes */
2807
2808 /* If data width is greater than 8 bytes, DRE is not in hw */
2809 if (width > 8)
2810 has_dre = false;
2811
2812 if (!has_dre)
2813 xdev->common.copy_align = (enum dmaengine_alignment)fls(width - 1);
2814
2815 if (of_device_is_compatible(node, "xlnx,axi-vdma-mm2s-channel") ||
2816 of_device_is_compatible(node, "xlnx,axi-dma-mm2s-channel") ||
2817 of_device_is_compatible(node, "xlnx,axi-cdma-channel")) {
2818 chan->direction = DMA_MEM_TO_DEV;
2819 chan->id = xdev->mm2s_chan_id++;
2820 chan->tdest = chan->id;
2821
2822 chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
2823 if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
2824 chan->desc_offset = XILINX_VDMA_MM2S_DESC_OFFSET;
2825 chan->config.park = 1;
2826
2827 if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
2828 xdev->flush_on_fsync == XILINX_DMA_FLUSH_MM2S)
2829 chan->flush_on_fsync = true;
2830 }
2831 } else if (of_device_is_compatible(node,
2832 "xlnx,axi-vdma-s2mm-channel") ||
2833 of_device_is_compatible(node,
2834 "xlnx,axi-dma-s2mm-channel")) {
2835 chan->direction = DMA_DEV_TO_MEM;
2836 chan->id = xdev->s2mm_chan_id++;
2837 chan->tdest = chan->id - xdev->dma_config->max_channels / 2;
2838 chan->has_vflip = of_property_read_bool(node,
2839 "xlnx,enable-vert-flip");
2840 if (chan->has_vflip) {
2841 chan->config.vflip_en = dma_read(chan,
2842 XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP) &
2843 XILINX_VDMA_ENABLE_VERTICAL_FLIP;
2844 }
2845
2846 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA)
2847 chan->ctrl_offset = XILINX_MCDMA_S2MM_CTRL_OFFSET;
2848 else
2849 chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
2850
2851 if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
2852 chan->desc_offset = XILINX_VDMA_S2MM_DESC_OFFSET;
2853 chan->config.park = 1;
2854
2855 if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
2856 xdev->flush_on_fsync == XILINX_DMA_FLUSH_S2MM)
2857 chan->flush_on_fsync = true;
2858 }
2859 } else {
2860 dev_err(xdev->dev, "Invalid channel compatible node\n");
2861 return -EINVAL;
2862 }
2863
2864 /* Request the interrupt */
2865 chan->irq = of_irq_get(node, chan->tdest);
2866 if (chan->irq < 0)
2867 return dev_err_probe(xdev->dev, chan->irq, "failed to get irq\n");
2868 err = request_irq(chan->irq, xdev->dma_config->irq_handler,
2869 IRQF_SHARED, "xilinx-dma-controller", chan);
2870 if (err) {
2871 dev_err(xdev->dev, "unable to request IRQ %d\n", chan->irq);
2872 return err;
2873 }
2874
2875 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
2876 chan->start_transfer = xilinx_dma_start_transfer;
2877 chan->stop_transfer = xilinx_dma_stop_transfer;
2878 } else if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
2879 chan->start_transfer = xilinx_mcdma_start_transfer;
2880 chan->stop_transfer = xilinx_dma_stop_transfer;
2881 } else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
2882 chan->start_transfer = xilinx_cdma_start_transfer;
2883 chan->stop_transfer = xilinx_cdma_stop_transfer;
2884 } else {
2885 chan->start_transfer = xilinx_vdma_start_transfer;
2886 chan->stop_transfer = xilinx_dma_stop_transfer;
2887 }
2888
2889 /* check if SG is enabled (only for AXIDMA, AXIMCDMA, and CDMA) */
2890 if (xdev->dma_config->dmatype != XDMA_TYPE_VDMA) {
2891 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA ||
2892 dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
2893 XILINX_DMA_DMASR_SG_MASK)
2894 chan->has_sg = true;
2895 dev_dbg(chan->dev, "ch %d: SG %s\n", chan->id,
2896 chan->has_sg ? "enabled" : "disabled");
2897 }
2898
2899 /* Initialize the tasklet */
2900 tasklet_setup(&chan->tasklet, xilinx_dma_do_tasklet);
2901
2902 /*
2903 * Initialize the DMA channel and add it to the DMA engine channels
2904 * list.
2905 */
2906 chan->common.device = &xdev->common;
2907
2908 list_add_tail(&chan->common.device_node, &xdev->common.channels);
2909 xdev->chan[chan->id] = chan;
2910
2911 /* Reset the channel */
2912 err = xilinx_dma_chan_reset(chan);
2913 if (err < 0) {
2914 dev_err(xdev->dev, "Reset channel failed\n");
2915 return err;
2916 }
2917
2918 return 0;
2919}
2920
2921/**
2922 * xilinx_dma_child_probe - Per child node probe
2923 * It get number of dma-channels per child node from
2924 * device-tree and initializes all the channels.
2925 *
2926 * @xdev: Driver specific device structure
2927 * @node: Device node
2928 *
2929 * Return: '0' on success and failure value on error.
2930 */
2931static int xilinx_dma_child_probe(struct xilinx_dma_device *xdev,
2932 struct device_node *node)
2933{
2934 int ret, i;
2935 u32 nr_channels = 1;
2936
2937 ret = of_property_read_u32(node, "dma-channels", &nr_channels);
2938 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA && ret < 0)
2939 dev_warn(xdev->dev, "missing dma-channels property\n");
2940
2941 for (i = 0; i < nr_channels; i++) {
2942 ret = xilinx_dma_chan_probe(xdev, node);
2943 if (ret)
2944 return ret;
2945 }
2946
2947 return 0;
2948}
2949
2950/**
2951 * of_dma_xilinx_xlate - Translation function
2952 * @dma_spec: Pointer to DMA specifier as found in the device tree
2953 * @ofdma: Pointer to DMA controller data
2954 *
2955 * Return: DMA channel pointer on success and NULL on error
2956 */
2957static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
2958 struct of_dma *ofdma)
2959{
2960 struct xilinx_dma_device *xdev = ofdma->of_dma_data;
2961 int chan_id = dma_spec->args[0];
2962
2963 if (chan_id >= xdev->dma_config->max_channels || !xdev->chan[chan_id])
2964 return NULL;
2965
2966 return dma_get_slave_channel(&xdev->chan[chan_id]->common);
2967}
2968
2969static const struct xilinx_dma_config axidma_config = {
2970 .dmatype = XDMA_TYPE_AXIDMA,
2971 .clk_init = axidma_clk_init,
2972 .irq_handler = xilinx_dma_irq_handler,
2973 .max_channels = XILINX_DMA_MAX_CHANS_PER_DEVICE,
2974};
2975
2976static const struct xilinx_dma_config aximcdma_config = {
2977 .dmatype = XDMA_TYPE_AXIMCDMA,
2978 .clk_init = axidma_clk_init,
2979 .irq_handler = xilinx_mcdma_irq_handler,
2980 .max_channels = XILINX_MCDMA_MAX_CHANS_PER_DEVICE,
2981};
2982static const struct xilinx_dma_config axicdma_config = {
2983 .dmatype = XDMA_TYPE_CDMA,
2984 .clk_init = axicdma_clk_init,
2985 .irq_handler = xilinx_dma_irq_handler,
2986 .max_channels = XILINX_CDMA_MAX_CHANS_PER_DEVICE,
2987};
2988
2989static const struct xilinx_dma_config axivdma_config = {
2990 .dmatype = XDMA_TYPE_VDMA,
2991 .clk_init = axivdma_clk_init,
2992 .irq_handler = xilinx_dma_irq_handler,
2993 .max_channels = XILINX_DMA_MAX_CHANS_PER_DEVICE,
2994};
2995
2996static const struct of_device_id xilinx_dma_of_ids[] = {
2997 { .compatible = "xlnx,axi-dma-1.00.a", .data = &axidma_config },
2998 { .compatible = "xlnx,axi-cdma-1.00.a", .data = &axicdma_config },
2999 { .compatible = "xlnx,axi-vdma-1.00.a", .data = &axivdma_config },
3000 { .compatible = "xlnx,axi-mcdma-1.00.a", .data = &aximcdma_config },
3001 {}
3002};
3003MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids);
3004
3005/**
3006 * xilinx_dma_probe - Driver probe function
3007 * @pdev: Pointer to the platform_device structure
3008 *
3009 * Return: '0' on success and failure value on error
3010 */
3011static int xilinx_dma_probe(struct platform_device *pdev)
3012{
3013 int (*clk_init)(struct platform_device *, struct clk **, struct clk **,
3014 struct clk **, struct clk **, struct clk **)
3015 = axivdma_clk_init;
3016 struct device_node *node = pdev->dev.of_node;
3017 struct xilinx_dma_device *xdev;
3018 struct device_node *child, *np = pdev->dev.of_node;
3019 u32 num_frames, addr_width, len_width;
3020 int i, err;
3021
3022 /* Allocate and initialize the DMA engine structure */
3023 xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL);
3024 if (!xdev)
3025 return -ENOMEM;
3026
3027 xdev->dev = &pdev->dev;
3028 if (np) {
3029 const struct of_device_id *match;
3030
3031 match = of_match_node(xilinx_dma_of_ids, np);
3032 if (match && match->data) {
3033 xdev->dma_config = match->data;
3034 clk_init = xdev->dma_config->clk_init;
3035 }
3036 }
3037
3038 err = clk_init(pdev, &xdev->axi_clk, &xdev->tx_clk, &xdev->txs_clk,
3039 &xdev->rx_clk, &xdev->rxs_clk);
3040 if (err)
3041 return err;
3042
3043 /* Request and map I/O memory */
3044 xdev->regs = devm_platform_ioremap_resource(pdev, 0);
3045 if (IS_ERR(xdev->regs)) {
3046 err = PTR_ERR(xdev->regs);
3047 goto disable_clks;
3048 }
3049 /* Retrieve the DMA engine properties from the device tree */
3050 xdev->max_buffer_len = GENMASK(XILINX_DMA_MAX_TRANS_LEN_MAX - 1, 0);
3051 xdev->s2mm_chan_id = xdev->dma_config->max_channels / 2;
3052
3053 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA ||
3054 xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
3055 if (!of_property_read_u32(node, "xlnx,sg-length-width",
3056 &len_width)) {
3057 if (len_width < XILINX_DMA_MAX_TRANS_LEN_MIN ||
3058 len_width > XILINX_DMA_V2_MAX_TRANS_LEN_MAX) {
3059 dev_warn(xdev->dev,
3060 "invalid xlnx,sg-length-width property value. Using default width\n");
3061 } else {
3062 if (len_width > XILINX_DMA_MAX_TRANS_LEN_MAX)
3063 dev_warn(xdev->dev, "Please ensure that IP supports buffer length > 23 bits\n");
3064 xdev->max_buffer_len =
3065 GENMASK(len_width - 1, 0);
3066 }
3067 }
3068 }
3069
3070 if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
3071 err = of_property_read_u32(node, "xlnx,num-fstores",
3072 &num_frames);
3073 if (err < 0) {
3074 dev_err(xdev->dev,
3075 "missing xlnx,num-fstores property\n");
3076 goto disable_clks;
3077 }
3078
3079 err = of_property_read_u32(node, "xlnx,flush-fsync",
3080 &xdev->flush_on_fsync);
3081 if (err < 0)
3082 dev_warn(xdev->dev,
3083 "missing xlnx,flush-fsync property\n");
3084 }
3085
3086 err = of_property_read_u32(node, "xlnx,addrwidth", &addr_width);
3087 if (err < 0)
3088 dev_warn(xdev->dev, "missing xlnx,addrwidth property\n");
3089
3090 if (addr_width > 32)
3091 xdev->ext_addr = true;
3092 else
3093 xdev->ext_addr = false;
3094
3095 /* Set the dma mask bits */
3096 err = dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
3097 if (err < 0) {
3098 dev_err(xdev->dev, "DMA mask error %d\n", err);
3099 goto disable_clks;
3100 }
3101
3102 /* Initialize the DMA engine */
3103 xdev->common.dev = &pdev->dev;
3104
3105 INIT_LIST_HEAD(&xdev->common.channels);
3106 if (!(xdev->dma_config->dmatype == XDMA_TYPE_CDMA)) {
3107 dma_cap_set(DMA_SLAVE, xdev->common.cap_mask);
3108 dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask);
3109 }
3110
3111 xdev->common.device_alloc_chan_resources =
3112 xilinx_dma_alloc_chan_resources;
3113 xdev->common.device_free_chan_resources =
3114 xilinx_dma_free_chan_resources;
3115 xdev->common.device_terminate_all = xilinx_dma_terminate_all;
3116 xdev->common.device_synchronize = xilinx_dma_synchronize;
3117 xdev->common.device_tx_status = xilinx_dma_tx_status;
3118 xdev->common.device_issue_pending = xilinx_dma_issue_pending;
3119 xdev->common.device_config = xilinx_dma_device_config;
3120 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
3121 dma_cap_set(DMA_CYCLIC, xdev->common.cap_mask);
3122 xdev->common.device_prep_slave_sg = xilinx_dma_prep_slave_sg;
3123 xdev->common.device_prep_dma_cyclic =
3124 xilinx_dma_prep_dma_cyclic;
3125 /* Residue calculation is supported by only AXI DMA and CDMA */
3126 xdev->common.residue_granularity =
3127 DMA_RESIDUE_GRANULARITY_SEGMENT;
3128 } else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
3129 dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
3130 xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
3131 /* Residue calculation is supported by only AXI DMA and CDMA */
3132 xdev->common.residue_granularity =
3133 DMA_RESIDUE_GRANULARITY_SEGMENT;
3134 } else if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
3135 xdev->common.device_prep_slave_sg = xilinx_mcdma_prep_slave_sg;
3136 } else {
3137 xdev->common.device_prep_interleaved_dma =
3138 xilinx_vdma_dma_prep_interleaved;
3139 }
3140
3141 platform_set_drvdata(pdev, xdev);
3142
3143 /* Initialize the channels */
3144 for_each_child_of_node(node, child) {
3145 err = xilinx_dma_child_probe(xdev, child);
3146 if (err < 0) {
3147 of_node_put(child);
3148 goto error;
3149 }
3150 }
3151
3152 if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
3153 for (i = 0; i < xdev->dma_config->max_channels; i++)
3154 if (xdev->chan[i])
3155 xdev->chan[i]->num_frms = num_frames;
3156 }
3157
3158 /* Register the DMA engine with the core */
3159 err = dma_async_device_register(&xdev->common);
3160 if (err) {
3161 dev_err(xdev->dev, "failed to register the dma device\n");
3162 goto error;
3163 }
3164
3165 err = of_dma_controller_register(node, of_dma_xilinx_xlate,
3166 xdev);
3167 if (err < 0) {
3168 dev_err(&pdev->dev, "Unable to register DMA to DT\n");
3169 dma_async_device_unregister(&xdev->common);
3170 goto error;
3171 }
3172
3173 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
3174 dev_info(&pdev->dev, "Xilinx AXI DMA Engine Driver Probed!!\n");
3175 else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA)
3176 dev_info(&pdev->dev, "Xilinx AXI CDMA Engine Driver Probed!!\n");
3177 else if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA)
3178 dev_info(&pdev->dev, "Xilinx AXI MCDMA Engine Driver Probed!!\n");
3179 else
3180 dev_info(&pdev->dev, "Xilinx AXI VDMA Engine Driver Probed!!\n");
3181
3182 return 0;
3183
3184error:
3185 for (i = 0; i < xdev->dma_config->max_channels; i++)
3186 if (xdev->chan[i])
3187 xilinx_dma_chan_remove(xdev->chan[i]);
3188disable_clks:
3189 xdma_disable_allclks(xdev);
3190
3191 return err;
3192}
3193
3194/**
3195 * xilinx_dma_remove - Driver remove function
3196 * @pdev: Pointer to the platform_device structure
3197 *
3198 * Return: Always '0'
3199 */
3200static int xilinx_dma_remove(struct platform_device *pdev)
3201{
3202 struct xilinx_dma_device *xdev = platform_get_drvdata(pdev);
3203 int i;
3204
3205 of_dma_controller_free(pdev->dev.of_node);
3206
3207 dma_async_device_unregister(&xdev->common);
3208
3209 for (i = 0; i < xdev->dma_config->max_channels; i++)
3210 if (xdev->chan[i])
3211 xilinx_dma_chan_remove(xdev->chan[i]);
3212
3213 xdma_disable_allclks(xdev);
3214
3215 return 0;
3216}
3217
3218static struct platform_driver xilinx_vdma_driver = {
3219 .driver = {
3220 .name = "xilinx-vdma",
3221 .of_match_table = xilinx_dma_of_ids,
3222 },
3223 .probe = xilinx_dma_probe,
3224 .remove = xilinx_dma_remove,
3225};
3226
3227module_platform_driver(xilinx_vdma_driver);
3228
3229MODULE_AUTHOR("Xilinx, Inc.");
3230MODULE_DESCRIPTION("Xilinx VDMA driver");
3231MODULE_LICENSE("GPL v2");