Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * MFD driver for TWL6040 audio device
4 *
5 * Authors: Misael Lopez Cruz <misael.lopez@ti.com>
6 * Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
7 * Peter Ujfalusi <peter.ujfalusi@ti.com>
8 *
9 * Copyright: (C) 2011 Texas Instruments, Inc.
10 */
11
12#include <linux/module.h>
13#include <linux/types.h>
14#include <linux/slab.h>
15#include <linux/kernel.h>
16#include <linux/err.h>
17#include <linux/platform_device.h>
18#include <linux/of.h>
19#include <linux/of_irq.h>
20#include <linux/of_gpio.h>
21#include <linux/of_platform.h>
22#include <linux/gpio.h>
23#include <linux/delay.h>
24#include <linux/i2c.h>
25#include <linux/regmap.h>
26#include <linux/mfd/core.h>
27#include <linux/mfd/twl6040.h>
28#include <linux/regulator/consumer.h>
29
30#define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
31#define TWL6040_NUM_SUPPLIES (2)
32
33static const struct reg_default twl6040_defaults[] = {
34 { 0x01, 0x4B }, /* REG_ASICID (ro) */
35 { 0x02, 0x00 }, /* REG_ASICREV (ro) */
36 { 0x03, 0x00 }, /* REG_INTID */
37 { 0x04, 0x00 }, /* REG_INTMR */
38 { 0x05, 0x00 }, /* REG_NCPCTRL */
39 { 0x06, 0x00 }, /* REG_LDOCTL */
40 { 0x07, 0x60 }, /* REG_HPPLLCTL */
41 { 0x08, 0x00 }, /* REG_LPPLLCTL */
42 { 0x09, 0x4A }, /* REG_LPPLLDIV */
43 { 0x0A, 0x00 }, /* REG_AMICBCTL */
44 { 0x0B, 0x00 }, /* REG_DMICBCTL */
45 { 0x0C, 0x00 }, /* REG_MICLCTL */
46 { 0x0D, 0x00 }, /* REG_MICRCTL */
47 { 0x0E, 0x00 }, /* REG_MICGAIN */
48 { 0x0F, 0x1B }, /* REG_LINEGAIN */
49 { 0x10, 0x00 }, /* REG_HSLCTL */
50 { 0x11, 0x00 }, /* REG_HSRCTL */
51 { 0x12, 0x00 }, /* REG_HSGAIN */
52 { 0x13, 0x00 }, /* REG_EARCTL */
53 { 0x14, 0x00 }, /* REG_HFLCTL */
54 { 0x15, 0x00 }, /* REG_HFLGAIN */
55 { 0x16, 0x00 }, /* REG_HFRCTL */
56 { 0x17, 0x00 }, /* REG_HFRGAIN */
57 { 0x18, 0x00 }, /* REG_VIBCTLL */
58 { 0x19, 0x00 }, /* REG_VIBDATL */
59 { 0x1A, 0x00 }, /* REG_VIBCTLR */
60 { 0x1B, 0x00 }, /* REG_VIBDATR */
61 { 0x1C, 0x00 }, /* REG_HKCTL1 */
62 { 0x1D, 0x00 }, /* REG_HKCTL2 */
63 { 0x1E, 0x00 }, /* REG_GPOCTL */
64 { 0x1F, 0x00 }, /* REG_ALB */
65 { 0x20, 0x00 }, /* REG_DLB */
66 /* 0x28, REG_TRIM1 */
67 /* 0x29, REG_TRIM2 */
68 /* 0x2A, REG_TRIM3 */
69 /* 0x2B, REG_HSOTRIM */
70 /* 0x2C, REG_HFOTRIM */
71 { 0x2D, 0x08 }, /* REG_ACCCTL */
72 { 0x2E, 0x00 }, /* REG_STATUS (ro) */
73};
74
75static struct reg_sequence twl6040_patch[] = {
76 /*
77 * Select I2C bus access to dual access registers
78 * Interrupt register is cleared on read
79 * Select fast mode for i2c (400KHz)
80 */
81 { TWL6040_REG_ACCCTL,
82 TWL6040_I2CSEL | TWL6040_INTCLRMODE | TWL6040_I2CMODE(1) },
83};
84
85
86static bool twl6040_has_vibra(struct device_node *parent)
87{
88 struct device_node *node;
89
90 node = of_get_child_by_name(parent, "vibra");
91 if (node) {
92 of_node_put(node);
93 return true;
94 }
95
96 return false;
97}
98
99int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
100{
101 int ret;
102 unsigned int val;
103
104 ret = regmap_read(twl6040->regmap, reg, &val);
105 if (ret < 0)
106 return ret;
107
108 return val;
109}
110EXPORT_SYMBOL(twl6040_reg_read);
111
112int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
113{
114 int ret;
115
116 ret = regmap_write(twl6040->regmap, reg, val);
117
118 return ret;
119}
120EXPORT_SYMBOL(twl6040_reg_write);
121
122int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
123{
124 return regmap_update_bits(twl6040->regmap, reg, mask, mask);
125}
126EXPORT_SYMBOL(twl6040_set_bits);
127
128int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
129{
130 return regmap_update_bits(twl6040->regmap, reg, mask, 0);
131}
132EXPORT_SYMBOL(twl6040_clear_bits);
133
134/* twl6040 codec manual power-up sequence */
135static int twl6040_power_up_manual(struct twl6040 *twl6040)
136{
137 u8 ldoctl, ncpctl, lppllctl;
138 int ret;
139
140 /* enable high-side LDO, reference system and internal oscillator */
141 ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA;
142 ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
143 if (ret)
144 return ret;
145 usleep_range(10000, 10500);
146
147 /* enable negative charge pump */
148 ncpctl = TWL6040_NCPENA;
149 ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
150 if (ret)
151 goto ncp_err;
152 usleep_range(1000, 1500);
153
154 /* enable low-side LDO */
155 ldoctl |= TWL6040_LSLDOENA;
156 ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
157 if (ret)
158 goto lsldo_err;
159 usleep_range(1000, 1500);
160
161 /* enable low-power PLL */
162 lppllctl = TWL6040_LPLLENA;
163 ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
164 if (ret)
165 goto lppll_err;
166 usleep_range(5000, 5500);
167
168 /* disable internal oscillator */
169 ldoctl &= ~TWL6040_OSCENA;
170 ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
171 if (ret)
172 goto osc_err;
173
174 return 0;
175
176osc_err:
177 lppllctl &= ~TWL6040_LPLLENA;
178 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
179lppll_err:
180 ldoctl &= ~TWL6040_LSLDOENA;
181 twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
182lsldo_err:
183 ncpctl &= ~TWL6040_NCPENA;
184 twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
185ncp_err:
186 ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
187 twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
188
189 dev_err(twl6040->dev, "manual power-up failed\n");
190 return ret;
191}
192
193/* twl6040 manual power-down sequence */
194static void twl6040_power_down_manual(struct twl6040 *twl6040)
195{
196 u8 ncpctl, ldoctl, lppllctl;
197
198 ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL);
199 ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL);
200 lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
201
202 /* enable internal oscillator */
203 ldoctl |= TWL6040_OSCENA;
204 twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
205 usleep_range(1000, 1500);
206
207 /* disable low-power PLL */
208 lppllctl &= ~TWL6040_LPLLENA;
209 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
210
211 /* disable low-side LDO */
212 ldoctl &= ~TWL6040_LSLDOENA;
213 twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
214
215 /* disable negative charge pump */
216 ncpctl &= ~TWL6040_NCPENA;
217 twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
218
219 /* disable high-side LDO, reference system and internal oscillator */
220 ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
221 twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
222}
223
224static irqreturn_t twl6040_readyint_handler(int irq, void *data)
225{
226 struct twl6040 *twl6040 = data;
227
228 complete(&twl6040->ready);
229
230 return IRQ_HANDLED;
231}
232
233static irqreturn_t twl6040_thint_handler(int irq, void *data)
234{
235 struct twl6040 *twl6040 = data;
236 u8 status;
237
238 status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
239 if (status & TWL6040_TSHUTDET) {
240 dev_warn(twl6040->dev, "Thermal shutdown, powering-off");
241 twl6040_power(twl6040, 0);
242 } else {
243 dev_warn(twl6040->dev, "Leaving thermal shutdown, powering-on");
244 twl6040_power(twl6040, 1);
245 }
246
247 return IRQ_HANDLED;
248}
249
250static int twl6040_power_up_automatic(struct twl6040 *twl6040)
251{
252 int time_left;
253
254 gpio_set_value(twl6040->audpwron, 1);
255
256 time_left = wait_for_completion_timeout(&twl6040->ready,
257 msecs_to_jiffies(144));
258 if (!time_left) {
259 u8 intid;
260
261 dev_warn(twl6040->dev, "timeout waiting for READYINT\n");
262 intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
263 if (!(intid & TWL6040_READYINT)) {
264 dev_err(twl6040->dev, "automatic power-up failed\n");
265 gpio_set_value(twl6040->audpwron, 0);
266 return -ETIMEDOUT;
267 }
268 }
269
270 return 0;
271}
272
273int twl6040_power(struct twl6040 *twl6040, int on)
274{
275 int ret = 0;
276
277 mutex_lock(&twl6040->mutex);
278
279 if (on) {
280 /* already powered-up */
281 if (twl6040->power_count++)
282 goto out;
283
284 ret = clk_prepare_enable(twl6040->clk32k);
285 if (ret) {
286 twl6040->power_count = 0;
287 goto out;
288 }
289
290 /* Allow writes to the chip */
291 regcache_cache_only(twl6040->regmap, false);
292
293 if (gpio_is_valid(twl6040->audpwron)) {
294 /* use automatic power-up sequence */
295 ret = twl6040_power_up_automatic(twl6040);
296 if (ret) {
297 clk_disable_unprepare(twl6040->clk32k);
298 twl6040->power_count = 0;
299 goto out;
300 }
301 } else {
302 /* use manual power-up sequence */
303 ret = twl6040_power_up_manual(twl6040);
304 if (ret) {
305 clk_disable_unprepare(twl6040->clk32k);
306 twl6040->power_count = 0;
307 goto out;
308 }
309 }
310
311 /*
312 * Register access can produce errors after power-up unless we
313 * wait at least 8ms based on measurements on duovero.
314 */
315 usleep_range(10000, 12000);
316
317 /* Sync with the HW */
318 ret = regcache_sync(twl6040->regmap);
319 if (ret) {
320 dev_err(twl6040->dev, "Failed to sync with the HW: %i\n",
321 ret);
322 goto out;
323 }
324
325 /* Default PLL configuration after power up */
326 twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
327 twl6040->sysclk_rate = 19200000;
328 } else {
329 /* already powered-down */
330 if (!twl6040->power_count) {
331 dev_err(twl6040->dev,
332 "device is already powered-off\n");
333 ret = -EPERM;
334 goto out;
335 }
336
337 if (--twl6040->power_count)
338 goto out;
339
340 if (gpio_is_valid(twl6040->audpwron)) {
341 /* use AUDPWRON line */
342 gpio_set_value(twl6040->audpwron, 0);
343
344 /* power-down sequence latency */
345 usleep_range(500, 700);
346 } else {
347 /* use manual power-down sequence */
348 twl6040_power_down_manual(twl6040);
349 }
350
351 /* Set regmap to cache only and mark it as dirty */
352 regcache_cache_only(twl6040->regmap, true);
353 regcache_mark_dirty(twl6040->regmap);
354
355 twl6040->sysclk_rate = 0;
356
357 if (twl6040->pll == TWL6040_SYSCLK_SEL_HPPLL) {
358 clk_disable_unprepare(twl6040->mclk);
359 twl6040->mclk_rate = 0;
360 }
361
362 clk_disable_unprepare(twl6040->clk32k);
363 }
364
365out:
366 mutex_unlock(&twl6040->mutex);
367 return ret;
368}
369EXPORT_SYMBOL(twl6040_power);
370
371int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
372 unsigned int freq_in, unsigned int freq_out)
373{
374 u8 hppllctl, lppllctl;
375 int ret = 0;
376
377 mutex_lock(&twl6040->mutex);
378
379 hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
380 lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
381
382 /* Force full reconfiguration when switching between PLL */
383 if (pll_id != twl6040->pll) {
384 twl6040->sysclk_rate = 0;
385 twl6040->mclk_rate = 0;
386 }
387
388 switch (pll_id) {
389 case TWL6040_SYSCLK_SEL_LPPLL:
390 /* low-power PLL divider */
391 /* Change the sysclk configuration only if it has been canged */
392 if (twl6040->sysclk_rate != freq_out) {
393 switch (freq_out) {
394 case 17640000:
395 lppllctl |= TWL6040_LPLLFIN;
396 break;
397 case 19200000:
398 lppllctl &= ~TWL6040_LPLLFIN;
399 break;
400 default:
401 dev_err(twl6040->dev,
402 "freq_out %d not supported\n",
403 freq_out);
404 ret = -EINVAL;
405 goto pll_out;
406 }
407 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
408 lppllctl);
409 }
410
411 /* The PLL in use has not been change, we can exit */
412 if (twl6040->pll == pll_id)
413 break;
414
415 switch (freq_in) {
416 case 32768:
417 lppllctl |= TWL6040_LPLLENA;
418 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
419 lppllctl);
420 mdelay(5);
421 lppllctl &= ~TWL6040_HPLLSEL;
422 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
423 lppllctl);
424 hppllctl &= ~TWL6040_HPLLENA;
425 twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
426 hppllctl);
427 break;
428 default:
429 dev_err(twl6040->dev,
430 "freq_in %d not supported\n", freq_in);
431 ret = -EINVAL;
432 goto pll_out;
433 }
434
435 clk_disable_unprepare(twl6040->mclk);
436 break;
437 case TWL6040_SYSCLK_SEL_HPPLL:
438 /* high-performance PLL can provide only 19.2 MHz */
439 if (freq_out != 19200000) {
440 dev_err(twl6040->dev,
441 "freq_out %d not supported\n", freq_out);
442 ret = -EINVAL;
443 goto pll_out;
444 }
445
446 if (twl6040->mclk_rate != freq_in) {
447 hppllctl &= ~TWL6040_MCLK_MSK;
448
449 switch (freq_in) {
450 case 12000000:
451 /* PLL enabled, active mode */
452 hppllctl |= TWL6040_MCLK_12000KHZ |
453 TWL6040_HPLLENA;
454 break;
455 case 19200000:
456 /* PLL enabled, bypass mode */
457 hppllctl |= TWL6040_MCLK_19200KHZ |
458 TWL6040_HPLLBP | TWL6040_HPLLENA;
459 break;
460 case 26000000:
461 /* PLL enabled, active mode */
462 hppllctl |= TWL6040_MCLK_26000KHZ |
463 TWL6040_HPLLENA;
464 break;
465 case 38400000:
466 /* PLL enabled, bypass mode */
467 hppllctl |= TWL6040_MCLK_38400KHZ |
468 TWL6040_HPLLBP | TWL6040_HPLLENA;
469 break;
470 default:
471 dev_err(twl6040->dev,
472 "freq_in %d not supported\n", freq_in);
473 ret = -EINVAL;
474 goto pll_out;
475 }
476
477 /* When switching to HPPLL, enable the mclk first */
478 if (pll_id != twl6040->pll)
479 clk_prepare_enable(twl6040->mclk);
480 /*
481 * enable clock slicer to ensure input waveform is
482 * square
483 */
484 hppllctl |= TWL6040_HPLLSQRENA;
485
486 twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
487 hppllctl);
488 usleep_range(500, 700);
489 lppllctl |= TWL6040_HPLLSEL;
490 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
491 lppllctl);
492 lppllctl &= ~TWL6040_LPLLENA;
493 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
494 lppllctl);
495
496 twl6040->mclk_rate = freq_in;
497 }
498 break;
499 default:
500 dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
501 ret = -EINVAL;
502 goto pll_out;
503 }
504
505 twl6040->sysclk_rate = freq_out;
506 twl6040->pll = pll_id;
507
508pll_out:
509 mutex_unlock(&twl6040->mutex);
510 return ret;
511}
512EXPORT_SYMBOL(twl6040_set_pll);
513
514int twl6040_get_pll(struct twl6040 *twl6040)
515{
516 if (twl6040->power_count)
517 return twl6040->pll;
518 else
519 return -ENODEV;
520}
521EXPORT_SYMBOL(twl6040_get_pll);
522
523unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
524{
525 return twl6040->sysclk_rate;
526}
527EXPORT_SYMBOL(twl6040_get_sysclk);
528
529/* Get the combined status of the vibra control register */
530int twl6040_get_vibralr_status(struct twl6040 *twl6040)
531{
532 unsigned int reg;
533 int ret;
534 u8 status;
535
536 ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLL, ®);
537 if (ret != 0)
538 return ret;
539 status = reg;
540
541 ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLR, ®);
542 if (ret != 0)
543 return ret;
544 status |= reg;
545
546 status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
547
548 return status;
549}
550EXPORT_SYMBOL(twl6040_get_vibralr_status);
551
552static struct resource twl6040_vibra_rsrc[] = {
553 {
554 .flags = IORESOURCE_IRQ,
555 },
556};
557
558static struct resource twl6040_codec_rsrc[] = {
559 {
560 .flags = IORESOURCE_IRQ,
561 },
562};
563
564static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
565{
566 /* Register 0 is not readable */
567 if (!reg)
568 return false;
569 return true;
570}
571
572static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
573{
574 switch (reg) {
575 case TWL6040_REG_ASICID:
576 case TWL6040_REG_ASICREV:
577 case TWL6040_REG_INTID:
578 case TWL6040_REG_LPPLLCTL:
579 case TWL6040_REG_HPPLLCTL:
580 case TWL6040_REG_STATUS:
581 return true;
582 default:
583 return false;
584 }
585}
586
587static bool twl6040_writeable_reg(struct device *dev, unsigned int reg)
588{
589 switch (reg) {
590 case TWL6040_REG_ASICID:
591 case TWL6040_REG_ASICREV:
592 case TWL6040_REG_STATUS:
593 return false;
594 default:
595 return true;
596 }
597}
598
599static const struct regmap_config twl6040_regmap_config = {
600 .reg_bits = 8,
601 .val_bits = 8,
602
603 .reg_defaults = twl6040_defaults,
604 .num_reg_defaults = ARRAY_SIZE(twl6040_defaults),
605
606 .max_register = TWL6040_REG_STATUS, /* 0x2e */
607
608 .readable_reg = twl6040_readable_reg,
609 .volatile_reg = twl6040_volatile_reg,
610 .writeable_reg = twl6040_writeable_reg,
611
612 .cache_type = REGCACHE_RBTREE,
613 .use_single_read = true,
614 .use_single_write = true,
615};
616
617static const struct regmap_irq twl6040_irqs[] = {
618 { .reg_offset = 0, .mask = TWL6040_THINT, },
619 { .reg_offset = 0, .mask = TWL6040_PLUGINT | TWL6040_UNPLUGINT, },
620 { .reg_offset = 0, .mask = TWL6040_HOOKINT, },
621 { .reg_offset = 0, .mask = TWL6040_HFINT, },
622 { .reg_offset = 0, .mask = TWL6040_VIBINT, },
623 { .reg_offset = 0, .mask = TWL6040_READYINT, },
624};
625
626static struct regmap_irq_chip twl6040_irq_chip = {
627 .name = "twl6040",
628 .irqs = twl6040_irqs,
629 .num_irqs = ARRAY_SIZE(twl6040_irqs),
630
631 .num_regs = 1,
632 .status_base = TWL6040_REG_INTID,
633 .mask_base = TWL6040_REG_INTMR,
634};
635
636static int twl6040_probe(struct i2c_client *client,
637 const struct i2c_device_id *id)
638{
639 struct device_node *node = client->dev.of_node;
640 struct twl6040 *twl6040;
641 struct mfd_cell *cell = NULL;
642 int irq, ret, children = 0;
643
644 if (!node) {
645 dev_err(&client->dev, "of node is missing\n");
646 return -EINVAL;
647 }
648
649 /* In order to operate correctly we need valid interrupt config */
650 if (!client->irq) {
651 dev_err(&client->dev, "Invalid IRQ configuration\n");
652 return -EINVAL;
653 }
654
655 twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040),
656 GFP_KERNEL);
657 if (!twl6040)
658 return -ENOMEM;
659
660 twl6040->regmap = devm_regmap_init_i2c(client, &twl6040_regmap_config);
661 if (IS_ERR(twl6040->regmap))
662 return PTR_ERR(twl6040->regmap);
663
664 i2c_set_clientdata(client, twl6040);
665
666 twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
667 if (IS_ERR(twl6040->clk32k)) {
668 if (PTR_ERR(twl6040->clk32k) == -EPROBE_DEFER)
669 return -EPROBE_DEFER;
670 dev_dbg(&client->dev, "clk32k is not handled\n");
671 twl6040->clk32k = NULL;
672 }
673
674 twl6040->mclk = devm_clk_get(&client->dev, "mclk");
675 if (IS_ERR(twl6040->mclk)) {
676 if (PTR_ERR(twl6040->mclk) == -EPROBE_DEFER)
677 return -EPROBE_DEFER;
678 dev_dbg(&client->dev, "mclk is not handled\n");
679 twl6040->mclk = NULL;
680 }
681
682 twl6040->supplies[0].supply = "vio";
683 twl6040->supplies[1].supply = "v2v1";
684 ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
685 twl6040->supplies);
686 if (ret != 0) {
687 dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
688 return ret;
689 }
690
691 ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
692 if (ret != 0) {
693 dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
694 return ret;
695 }
696
697 twl6040->dev = &client->dev;
698 twl6040->irq = client->irq;
699
700 mutex_init(&twl6040->mutex);
701 init_completion(&twl6040->ready);
702
703 regmap_register_patch(twl6040->regmap, twl6040_patch,
704 ARRAY_SIZE(twl6040_patch));
705
706 twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
707 if (twl6040->rev < 0) {
708 dev_err(&client->dev, "Failed to read revision register: %d\n",
709 twl6040->rev);
710 ret = twl6040->rev;
711 goto gpio_err;
712 }
713
714 /* ERRATA: Automatic power-up is not possible in ES1.0 */
715 if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
716 twl6040->audpwron = of_get_named_gpio(node,
717 "ti,audpwron-gpio", 0);
718 else
719 twl6040->audpwron = -EINVAL;
720
721 if (gpio_is_valid(twl6040->audpwron)) {
722 ret = devm_gpio_request_one(&client->dev, twl6040->audpwron,
723 GPIOF_OUT_INIT_LOW, "audpwron");
724 if (ret)
725 goto gpio_err;
726
727 /* Clear any pending interrupt */
728 twl6040_reg_read(twl6040, TWL6040_REG_INTID);
729 }
730
731 ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq, IRQF_ONESHOT,
732 0, &twl6040_irq_chip, &twl6040->irq_data);
733 if (ret < 0)
734 goto gpio_err;
735
736 twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
737 TWL6040_IRQ_READY);
738 twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
739 TWL6040_IRQ_TH);
740
741 ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_ready, NULL,
742 twl6040_readyint_handler, IRQF_ONESHOT,
743 "twl6040_irq_ready", twl6040);
744 if (ret) {
745 dev_err(twl6040->dev, "READY IRQ request failed: %d\n", ret);
746 goto readyirq_err;
747 }
748
749 ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_th, NULL,
750 twl6040_thint_handler, IRQF_ONESHOT,
751 "twl6040_irq_th", twl6040);
752 if (ret) {
753 dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret);
754 goto readyirq_err;
755 }
756
757 /*
758 * The main functionality of twl6040 to provide audio on OMAP4+ systems.
759 * We can add the ASoC codec child whenever this driver has been loaded.
760 */
761 irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_PLUG);
762 cell = &twl6040->cells[children];
763 cell->name = "twl6040-codec";
764 twl6040_codec_rsrc[0].start = irq;
765 twl6040_codec_rsrc[0].end = irq;
766 cell->resources = twl6040_codec_rsrc;
767 cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
768 children++;
769
770 /* Vibra input driver support */
771 if (twl6040_has_vibra(node)) {
772 irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_VIB);
773
774 cell = &twl6040->cells[children];
775 cell->name = "twl6040-vibra";
776 twl6040_vibra_rsrc[0].start = irq;
777 twl6040_vibra_rsrc[0].end = irq;
778 cell->resources = twl6040_vibra_rsrc;
779 cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);
780 children++;
781 }
782
783 /* GPO support */
784 cell = &twl6040->cells[children];
785 cell->name = "twl6040-gpo";
786 children++;
787
788 /* PDM clock support */
789 cell = &twl6040->cells[children];
790 cell->name = "twl6040-pdmclk";
791 children++;
792
793 /* The chip is powered down so mark regmap to cache only and dirty */
794 regcache_cache_only(twl6040->regmap, true);
795 regcache_mark_dirty(twl6040->regmap);
796
797 ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
798 NULL, 0, NULL);
799 if (ret)
800 goto readyirq_err;
801
802 return 0;
803
804readyirq_err:
805 regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
806gpio_err:
807 regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
808 return ret;
809}
810
811static int twl6040_remove(struct i2c_client *client)
812{
813 struct twl6040 *twl6040 = i2c_get_clientdata(client);
814
815 if (twl6040->power_count)
816 twl6040_power(twl6040, 0);
817
818 regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
819
820 mfd_remove_devices(&client->dev);
821
822 regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
823
824 return 0;
825}
826
827static const struct i2c_device_id twl6040_i2c_id[] = {
828 { "twl6040", 0, },
829 { "twl6041", 0, },
830 { },
831};
832MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id);
833
834static struct i2c_driver twl6040_driver = {
835 .driver = {
836 .name = "twl6040",
837 },
838 .probe = twl6040_probe,
839 .remove = twl6040_remove,
840 .id_table = twl6040_i2c_id,
841};
842
843module_i2c_driver(twl6040_driver);
844
845MODULE_DESCRIPTION("TWL6040 MFD");
846MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
847MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
848MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * MFD driver for TWL6040 audio device
4 *
5 * Authors: Misael Lopez Cruz <misael.lopez@ti.com>
6 * Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
7 * Peter Ujfalusi <peter.ujfalusi@ti.com>
8 *
9 * Copyright: (C) 2011 Texas Instruments, Inc.
10 */
11
12#include <linux/module.h>
13#include <linux/types.h>
14#include <linux/slab.h>
15#include <linux/kernel.h>
16#include <linux/err.h>
17#include <linux/platform_device.h>
18#include <linux/of.h>
19#include <linux/gpio/consumer.h>
20#include <linux/delay.h>
21#include <linux/i2c.h>
22#include <linux/regmap.h>
23#include <linux/mfd/core.h>
24#include <linux/mfd/twl6040.h>
25#include <linux/regulator/consumer.h>
26
27#define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
28#define TWL6040_NUM_SUPPLIES (2)
29
30static const struct reg_default twl6040_defaults[] = {
31 { 0x01, 0x4B }, /* REG_ASICID (ro) */
32 { 0x02, 0x00 }, /* REG_ASICREV (ro) */
33 { 0x03, 0x00 }, /* REG_INTID */
34 { 0x04, 0x00 }, /* REG_INTMR */
35 { 0x05, 0x00 }, /* REG_NCPCTRL */
36 { 0x06, 0x00 }, /* REG_LDOCTL */
37 { 0x07, 0x60 }, /* REG_HPPLLCTL */
38 { 0x08, 0x00 }, /* REG_LPPLLCTL */
39 { 0x09, 0x4A }, /* REG_LPPLLDIV */
40 { 0x0A, 0x00 }, /* REG_AMICBCTL */
41 { 0x0B, 0x00 }, /* REG_DMICBCTL */
42 { 0x0C, 0x00 }, /* REG_MICLCTL */
43 { 0x0D, 0x00 }, /* REG_MICRCTL */
44 { 0x0E, 0x00 }, /* REG_MICGAIN */
45 { 0x0F, 0x1B }, /* REG_LINEGAIN */
46 { 0x10, 0x00 }, /* REG_HSLCTL */
47 { 0x11, 0x00 }, /* REG_HSRCTL */
48 { 0x12, 0x00 }, /* REG_HSGAIN */
49 { 0x13, 0x00 }, /* REG_EARCTL */
50 { 0x14, 0x00 }, /* REG_HFLCTL */
51 { 0x15, 0x00 }, /* REG_HFLGAIN */
52 { 0x16, 0x00 }, /* REG_HFRCTL */
53 { 0x17, 0x00 }, /* REG_HFRGAIN */
54 { 0x18, 0x00 }, /* REG_VIBCTLL */
55 { 0x19, 0x00 }, /* REG_VIBDATL */
56 { 0x1A, 0x00 }, /* REG_VIBCTLR */
57 { 0x1B, 0x00 }, /* REG_VIBDATR */
58 { 0x1C, 0x00 }, /* REG_HKCTL1 */
59 { 0x1D, 0x00 }, /* REG_HKCTL2 */
60 { 0x1E, 0x00 }, /* REG_GPOCTL */
61 { 0x1F, 0x00 }, /* REG_ALB */
62 { 0x20, 0x00 }, /* REG_DLB */
63 /* 0x28, REG_TRIM1 */
64 /* 0x29, REG_TRIM2 */
65 /* 0x2A, REG_TRIM3 */
66 /* 0x2B, REG_HSOTRIM */
67 /* 0x2C, REG_HFOTRIM */
68 { 0x2D, 0x08 }, /* REG_ACCCTL */
69 { 0x2E, 0x00 }, /* REG_STATUS (ro) */
70};
71
72static struct reg_sequence twl6040_patch[] = {
73 /*
74 * Select I2C bus access to dual access registers
75 * Interrupt register is cleared on read
76 * Select fast mode for i2c (400KHz)
77 */
78 { TWL6040_REG_ACCCTL,
79 TWL6040_I2CSEL | TWL6040_INTCLRMODE | TWL6040_I2CMODE(1) },
80};
81
82
83static bool twl6040_has_vibra(struct device_node *parent)
84{
85 struct device_node *node;
86
87 node = of_get_child_by_name(parent, "vibra");
88 if (node) {
89 of_node_put(node);
90 return true;
91 }
92
93 return false;
94}
95
96int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
97{
98 int ret;
99 unsigned int val;
100
101 ret = regmap_read(twl6040->regmap, reg, &val);
102 if (ret < 0)
103 return ret;
104
105 return val;
106}
107EXPORT_SYMBOL(twl6040_reg_read);
108
109int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
110{
111 int ret;
112
113 ret = regmap_write(twl6040->regmap, reg, val);
114
115 return ret;
116}
117EXPORT_SYMBOL(twl6040_reg_write);
118
119int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
120{
121 return regmap_update_bits(twl6040->regmap, reg, mask, mask);
122}
123EXPORT_SYMBOL(twl6040_set_bits);
124
125int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
126{
127 return regmap_update_bits(twl6040->regmap, reg, mask, 0);
128}
129EXPORT_SYMBOL(twl6040_clear_bits);
130
131/* twl6040 codec manual power-up sequence */
132static int twl6040_power_up_manual(struct twl6040 *twl6040)
133{
134 u8 ldoctl, ncpctl, lppllctl;
135 int ret;
136
137 /* enable high-side LDO, reference system and internal oscillator */
138 ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA;
139 ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
140 if (ret)
141 return ret;
142 usleep_range(10000, 10500);
143
144 /* enable negative charge pump */
145 ncpctl = TWL6040_NCPENA;
146 ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
147 if (ret)
148 goto ncp_err;
149 usleep_range(1000, 1500);
150
151 /* enable low-side LDO */
152 ldoctl |= TWL6040_LSLDOENA;
153 ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
154 if (ret)
155 goto lsldo_err;
156 usleep_range(1000, 1500);
157
158 /* enable low-power PLL */
159 lppllctl = TWL6040_LPLLENA;
160 ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
161 if (ret)
162 goto lppll_err;
163 usleep_range(5000, 5500);
164
165 /* disable internal oscillator */
166 ldoctl &= ~TWL6040_OSCENA;
167 ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
168 if (ret)
169 goto osc_err;
170
171 return 0;
172
173osc_err:
174 lppllctl &= ~TWL6040_LPLLENA;
175 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
176lppll_err:
177 ldoctl &= ~TWL6040_LSLDOENA;
178 twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
179lsldo_err:
180 ncpctl &= ~TWL6040_NCPENA;
181 twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
182ncp_err:
183 ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
184 twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
185
186 dev_err(twl6040->dev, "manual power-up failed\n");
187 return ret;
188}
189
190/* twl6040 manual power-down sequence */
191static void twl6040_power_down_manual(struct twl6040 *twl6040)
192{
193 u8 ncpctl, ldoctl, lppllctl;
194
195 ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL);
196 ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL);
197 lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
198
199 /* enable internal oscillator */
200 ldoctl |= TWL6040_OSCENA;
201 twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
202 usleep_range(1000, 1500);
203
204 /* disable low-power PLL */
205 lppllctl &= ~TWL6040_LPLLENA;
206 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
207
208 /* disable low-side LDO */
209 ldoctl &= ~TWL6040_LSLDOENA;
210 twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
211
212 /* disable negative charge pump */
213 ncpctl &= ~TWL6040_NCPENA;
214 twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
215
216 /* disable high-side LDO, reference system and internal oscillator */
217 ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
218 twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
219}
220
221static irqreturn_t twl6040_readyint_handler(int irq, void *data)
222{
223 struct twl6040 *twl6040 = data;
224
225 complete(&twl6040->ready);
226
227 return IRQ_HANDLED;
228}
229
230static irqreturn_t twl6040_thint_handler(int irq, void *data)
231{
232 struct twl6040 *twl6040 = data;
233 u8 status;
234
235 status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
236 if (status & TWL6040_TSHUTDET) {
237 dev_warn(twl6040->dev, "Thermal shutdown, powering-off");
238 twl6040_power(twl6040, 0);
239 } else {
240 dev_warn(twl6040->dev, "Leaving thermal shutdown, powering-on");
241 twl6040_power(twl6040, 1);
242 }
243
244 return IRQ_HANDLED;
245}
246
247static int twl6040_power_up_automatic(struct twl6040 *twl6040)
248{
249 int time_left;
250
251 gpiod_set_value_cansleep(twl6040->audpwron, 1);
252
253 time_left = wait_for_completion_timeout(&twl6040->ready,
254 msecs_to_jiffies(144));
255 if (!time_left) {
256 u8 intid;
257
258 dev_warn(twl6040->dev, "timeout waiting for READYINT\n");
259 intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
260 if (!(intid & TWL6040_READYINT)) {
261 dev_err(twl6040->dev, "automatic power-up failed\n");
262 gpiod_set_value_cansleep(twl6040->audpwron, 0);
263 return -ETIMEDOUT;
264 }
265 }
266
267 return 0;
268}
269
270int twl6040_power(struct twl6040 *twl6040, int on)
271{
272 int ret = 0;
273
274 mutex_lock(&twl6040->mutex);
275
276 if (on) {
277 /* already powered-up */
278 if (twl6040->power_count++)
279 goto out;
280
281 ret = clk_prepare_enable(twl6040->clk32k);
282 if (ret) {
283 twl6040->power_count = 0;
284 goto out;
285 }
286
287 /* Allow writes to the chip */
288 regcache_cache_only(twl6040->regmap, false);
289
290 if (twl6040->audpwron) {
291 /* use automatic power-up sequence */
292 ret = twl6040_power_up_automatic(twl6040);
293 if (ret) {
294 clk_disable_unprepare(twl6040->clk32k);
295 twl6040->power_count = 0;
296 goto out;
297 }
298 } else {
299 /* use manual power-up sequence */
300 ret = twl6040_power_up_manual(twl6040);
301 if (ret) {
302 clk_disable_unprepare(twl6040->clk32k);
303 twl6040->power_count = 0;
304 goto out;
305 }
306 }
307
308 /*
309 * Register access can produce errors after power-up unless we
310 * wait at least 8ms based on measurements on duovero.
311 */
312 usleep_range(10000, 12000);
313
314 /* Sync with the HW */
315 ret = regcache_sync(twl6040->regmap);
316 if (ret) {
317 dev_err(twl6040->dev, "Failed to sync with the HW: %i\n",
318 ret);
319 goto out;
320 }
321
322 /* Default PLL configuration after power up */
323 twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
324 twl6040->sysclk_rate = 19200000;
325 } else {
326 /* already powered-down */
327 if (!twl6040->power_count) {
328 dev_err(twl6040->dev,
329 "device is already powered-off\n");
330 ret = -EPERM;
331 goto out;
332 }
333
334 if (--twl6040->power_count)
335 goto out;
336
337 if (twl6040->audpwron) {
338 /* use AUDPWRON line */
339 gpiod_set_value_cansleep(twl6040->audpwron, 0);
340
341 /* power-down sequence latency */
342 usleep_range(500, 700);
343 } else {
344 /* use manual power-down sequence */
345 twl6040_power_down_manual(twl6040);
346 }
347
348 /* Set regmap to cache only and mark it as dirty */
349 regcache_cache_only(twl6040->regmap, true);
350 regcache_mark_dirty(twl6040->regmap);
351
352 twl6040->sysclk_rate = 0;
353
354 if (twl6040->pll == TWL6040_SYSCLK_SEL_HPPLL) {
355 clk_disable_unprepare(twl6040->mclk);
356 twl6040->mclk_rate = 0;
357 }
358
359 clk_disable_unprepare(twl6040->clk32k);
360 }
361
362out:
363 mutex_unlock(&twl6040->mutex);
364 return ret;
365}
366EXPORT_SYMBOL(twl6040_power);
367
368int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
369 unsigned int freq_in, unsigned int freq_out)
370{
371 u8 hppllctl, lppllctl;
372 int ret = 0;
373
374 mutex_lock(&twl6040->mutex);
375
376 hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
377 lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
378
379 /* Force full reconfiguration when switching between PLL */
380 if (pll_id != twl6040->pll) {
381 twl6040->sysclk_rate = 0;
382 twl6040->mclk_rate = 0;
383 }
384
385 switch (pll_id) {
386 case TWL6040_SYSCLK_SEL_LPPLL:
387 /* low-power PLL divider */
388 /* Change the sysclk configuration only if it has been canged */
389 if (twl6040->sysclk_rate != freq_out) {
390 switch (freq_out) {
391 case 17640000:
392 lppllctl |= TWL6040_LPLLFIN;
393 break;
394 case 19200000:
395 lppllctl &= ~TWL6040_LPLLFIN;
396 break;
397 default:
398 dev_err(twl6040->dev,
399 "freq_out %d not supported\n",
400 freq_out);
401 ret = -EINVAL;
402 goto pll_out;
403 }
404 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
405 lppllctl);
406 }
407
408 /* The PLL in use has not been change, we can exit */
409 if (twl6040->pll == pll_id)
410 break;
411
412 switch (freq_in) {
413 case 32768:
414 lppllctl |= TWL6040_LPLLENA;
415 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
416 lppllctl);
417 mdelay(5);
418 lppllctl &= ~TWL6040_HPLLSEL;
419 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
420 lppllctl);
421 hppllctl &= ~TWL6040_HPLLENA;
422 twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
423 hppllctl);
424 break;
425 default:
426 dev_err(twl6040->dev,
427 "freq_in %d not supported\n", freq_in);
428 ret = -EINVAL;
429 goto pll_out;
430 }
431
432 clk_disable_unprepare(twl6040->mclk);
433 break;
434 case TWL6040_SYSCLK_SEL_HPPLL:
435 /* high-performance PLL can provide only 19.2 MHz */
436 if (freq_out != 19200000) {
437 dev_err(twl6040->dev,
438 "freq_out %d not supported\n", freq_out);
439 ret = -EINVAL;
440 goto pll_out;
441 }
442
443 if (twl6040->mclk_rate != freq_in) {
444 hppllctl &= ~TWL6040_MCLK_MSK;
445
446 switch (freq_in) {
447 case 12000000:
448 /* PLL enabled, active mode */
449 hppllctl |= TWL6040_MCLK_12000KHZ |
450 TWL6040_HPLLENA;
451 break;
452 case 19200000:
453 /* PLL enabled, bypass mode */
454 hppllctl |= TWL6040_MCLK_19200KHZ |
455 TWL6040_HPLLBP | TWL6040_HPLLENA;
456 break;
457 case 26000000:
458 /* PLL enabled, active mode */
459 hppllctl |= TWL6040_MCLK_26000KHZ |
460 TWL6040_HPLLENA;
461 break;
462 case 38400000:
463 /* PLL enabled, bypass mode */
464 hppllctl |= TWL6040_MCLK_38400KHZ |
465 TWL6040_HPLLBP | TWL6040_HPLLENA;
466 break;
467 default:
468 dev_err(twl6040->dev,
469 "freq_in %d not supported\n", freq_in);
470 ret = -EINVAL;
471 goto pll_out;
472 }
473
474 /* When switching to HPPLL, enable the mclk first */
475 if (pll_id != twl6040->pll)
476 clk_prepare_enable(twl6040->mclk);
477 /*
478 * enable clock slicer to ensure input waveform is
479 * square
480 */
481 hppllctl |= TWL6040_HPLLSQRENA;
482
483 twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
484 hppllctl);
485 usleep_range(500, 700);
486 lppllctl |= TWL6040_HPLLSEL;
487 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
488 lppllctl);
489 lppllctl &= ~TWL6040_LPLLENA;
490 twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
491 lppllctl);
492
493 twl6040->mclk_rate = freq_in;
494 }
495 break;
496 default:
497 dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
498 ret = -EINVAL;
499 goto pll_out;
500 }
501
502 twl6040->sysclk_rate = freq_out;
503 twl6040->pll = pll_id;
504
505pll_out:
506 mutex_unlock(&twl6040->mutex);
507 return ret;
508}
509EXPORT_SYMBOL(twl6040_set_pll);
510
511int twl6040_get_pll(struct twl6040 *twl6040)
512{
513 if (twl6040->power_count)
514 return twl6040->pll;
515 else
516 return -ENODEV;
517}
518EXPORT_SYMBOL(twl6040_get_pll);
519
520unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
521{
522 return twl6040->sysclk_rate;
523}
524EXPORT_SYMBOL(twl6040_get_sysclk);
525
526/* Get the combined status of the vibra control register */
527int twl6040_get_vibralr_status(struct twl6040 *twl6040)
528{
529 unsigned int reg;
530 int ret;
531 u8 status;
532
533 ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLL, ®);
534 if (ret != 0)
535 return ret;
536 status = reg;
537
538 ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLR, ®);
539 if (ret != 0)
540 return ret;
541 status |= reg;
542
543 status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
544
545 return status;
546}
547EXPORT_SYMBOL(twl6040_get_vibralr_status);
548
549static struct resource twl6040_vibra_rsrc[] = {
550 {
551 .flags = IORESOURCE_IRQ,
552 },
553};
554
555static struct resource twl6040_codec_rsrc[] = {
556 {
557 .flags = IORESOURCE_IRQ,
558 },
559};
560
561static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
562{
563 /* Register 0 is not readable */
564 if (!reg)
565 return false;
566 return true;
567}
568
569static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
570{
571 switch (reg) {
572 case TWL6040_REG_ASICID:
573 case TWL6040_REG_ASICREV:
574 case TWL6040_REG_INTID:
575 case TWL6040_REG_LPPLLCTL:
576 case TWL6040_REG_HPPLLCTL:
577 case TWL6040_REG_STATUS:
578 return true;
579 default:
580 return false;
581 }
582}
583
584static bool twl6040_writeable_reg(struct device *dev, unsigned int reg)
585{
586 switch (reg) {
587 case TWL6040_REG_ASICID:
588 case TWL6040_REG_ASICREV:
589 case TWL6040_REG_STATUS:
590 return false;
591 default:
592 return true;
593 }
594}
595
596static const struct regmap_config twl6040_regmap_config = {
597 .reg_bits = 8,
598 .val_bits = 8,
599
600 .reg_defaults = twl6040_defaults,
601 .num_reg_defaults = ARRAY_SIZE(twl6040_defaults),
602
603 .max_register = TWL6040_REG_STATUS, /* 0x2e */
604
605 .readable_reg = twl6040_readable_reg,
606 .volatile_reg = twl6040_volatile_reg,
607 .writeable_reg = twl6040_writeable_reg,
608
609 .cache_type = REGCACHE_MAPLE,
610 .use_single_read = true,
611 .use_single_write = true,
612};
613
614static const struct regmap_irq twl6040_irqs[] = {
615 { .reg_offset = 0, .mask = TWL6040_THINT, },
616 { .reg_offset = 0, .mask = TWL6040_PLUGINT | TWL6040_UNPLUGINT, },
617 { .reg_offset = 0, .mask = TWL6040_HOOKINT, },
618 { .reg_offset = 0, .mask = TWL6040_HFINT, },
619 { .reg_offset = 0, .mask = TWL6040_VIBINT, },
620 { .reg_offset = 0, .mask = TWL6040_READYINT, },
621};
622
623static const struct regmap_irq_chip twl6040_irq_chip = {
624 .name = "twl6040",
625 .irqs = twl6040_irqs,
626 .num_irqs = ARRAY_SIZE(twl6040_irqs),
627
628 .num_regs = 1,
629 .status_base = TWL6040_REG_INTID,
630 .mask_base = TWL6040_REG_INTMR,
631};
632
633static int twl6040_probe(struct i2c_client *client)
634{
635 struct device_node *node = client->dev.of_node;
636 struct twl6040 *twl6040;
637 struct mfd_cell *cell = NULL;
638 int irq, ret, children = 0;
639
640 if (!node) {
641 dev_err(&client->dev, "of node is missing\n");
642 return -EINVAL;
643 }
644
645 /* In order to operate correctly we need valid interrupt config */
646 if (!client->irq) {
647 dev_err(&client->dev, "Invalid IRQ configuration\n");
648 return -EINVAL;
649 }
650
651 twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040),
652 GFP_KERNEL);
653 if (!twl6040)
654 return -ENOMEM;
655
656 twl6040->regmap = devm_regmap_init_i2c(client, &twl6040_regmap_config);
657 if (IS_ERR(twl6040->regmap))
658 return PTR_ERR(twl6040->regmap);
659
660 i2c_set_clientdata(client, twl6040);
661
662 twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
663 if (IS_ERR(twl6040->clk32k)) {
664 if (PTR_ERR(twl6040->clk32k) == -EPROBE_DEFER)
665 return -EPROBE_DEFER;
666 dev_dbg(&client->dev, "clk32k is not handled\n");
667 twl6040->clk32k = NULL;
668 }
669
670 twl6040->mclk = devm_clk_get(&client->dev, "mclk");
671 if (IS_ERR(twl6040->mclk)) {
672 if (PTR_ERR(twl6040->mclk) == -EPROBE_DEFER)
673 return -EPROBE_DEFER;
674 dev_dbg(&client->dev, "mclk is not handled\n");
675 twl6040->mclk = NULL;
676 }
677
678 twl6040->supplies[0].supply = "vio";
679 twl6040->supplies[1].supply = "v2v1";
680 ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
681 twl6040->supplies);
682 if (ret != 0) {
683 dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
684 return ret;
685 }
686
687 ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
688 if (ret != 0) {
689 dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
690 return ret;
691 }
692
693 twl6040->dev = &client->dev;
694 twl6040->irq = client->irq;
695
696 mutex_init(&twl6040->mutex);
697 init_completion(&twl6040->ready);
698
699 regmap_register_patch(twl6040->regmap, twl6040_patch,
700 ARRAY_SIZE(twl6040_patch));
701
702 twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
703 if (twl6040->rev < 0) {
704 dev_err(&client->dev, "Failed to read revision register: %d\n",
705 twl6040->rev);
706 ret = twl6040->rev;
707 goto gpio_err;
708 }
709
710 /* ERRATA: Automatic power-up is not possible in ES1.0 */
711 if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) {
712 twl6040->audpwron = devm_gpiod_get_optional(&client->dev,
713 "ti,audpwron",
714 GPIOD_OUT_LOW);
715 ret = PTR_ERR_OR_ZERO(twl6040->audpwron);
716 if (ret)
717 goto gpio_err;
718
719 gpiod_set_consumer_name(twl6040->audpwron, "audpwron");
720
721 /* Clear any pending interrupt */
722 twl6040_reg_read(twl6040, TWL6040_REG_INTID);
723 }
724
725 ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq, IRQF_ONESHOT,
726 0, &twl6040_irq_chip, &twl6040->irq_data);
727 if (ret < 0)
728 goto gpio_err;
729
730 twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
731 TWL6040_IRQ_READY);
732 twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
733 TWL6040_IRQ_TH);
734
735 ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_ready, NULL,
736 twl6040_readyint_handler, IRQF_ONESHOT,
737 "twl6040_irq_ready", twl6040);
738 if (ret) {
739 dev_err(twl6040->dev, "READY IRQ request failed: %d\n", ret);
740 goto readyirq_err;
741 }
742
743 ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_th, NULL,
744 twl6040_thint_handler, IRQF_ONESHOT,
745 "twl6040_irq_th", twl6040);
746 if (ret) {
747 dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret);
748 goto readyirq_err;
749 }
750
751 /*
752 * The main functionality of twl6040 to provide audio on OMAP4+ systems.
753 * We can add the ASoC codec child whenever this driver has been loaded.
754 */
755 irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_PLUG);
756 cell = &twl6040->cells[children];
757 cell->name = "twl6040-codec";
758 twl6040_codec_rsrc[0].start = irq;
759 twl6040_codec_rsrc[0].end = irq;
760 cell->resources = twl6040_codec_rsrc;
761 cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
762 children++;
763
764 /* Vibra input driver support */
765 if (twl6040_has_vibra(node)) {
766 irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_VIB);
767
768 cell = &twl6040->cells[children];
769 cell->name = "twl6040-vibra";
770 twl6040_vibra_rsrc[0].start = irq;
771 twl6040_vibra_rsrc[0].end = irq;
772 cell->resources = twl6040_vibra_rsrc;
773 cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);
774 children++;
775 }
776
777 /* GPO support */
778 cell = &twl6040->cells[children];
779 cell->name = "twl6040-gpo";
780 children++;
781
782 /* PDM clock support */
783 cell = &twl6040->cells[children];
784 cell->name = "twl6040-pdmclk";
785 children++;
786
787 /* The chip is powered down so mark regmap to cache only and dirty */
788 regcache_cache_only(twl6040->regmap, true);
789 regcache_mark_dirty(twl6040->regmap);
790
791 ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
792 NULL, 0, NULL);
793 if (ret)
794 goto readyirq_err;
795
796 return 0;
797
798readyirq_err:
799 regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
800gpio_err:
801 regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
802 return ret;
803}
804
805static void twl6040_remove(struct i2c_client *client)
806{
807 struct twl6040 *twl6040 = i2c_get_clientdata(client);
808
809 if (twl6040->power_count)
810 twl6040_power(twl6040, 0);
811
812 regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
813
814 mfd_remove_devices(&client->dev);
815
816 regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
817}
818
819static const struct i2c_device_id twl6040_i2c_id[] = {
820 { "twl6040" },
821 { "twl6041" },
822 { }
823};
824MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id);
825
826static struct i2c_driver twl6040_driver = {
827 .driver = {
828 .name = "twl6040",
829 },
830 .probe = twl6040_probe,
831 .remove = twl6040_remove,
832 .id_table = twl6040_i2c_id,
833};
834
835module_i2c_driver(twl6040_driver);
836
837MODULE_DESCRIPTION("TWL6040 MFD");
838MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
839MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");