Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Driver for USB Mass Storage compliant devices
4 *
5 * Current development and maintenance by:
6 * (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
7 *
8 * Developed with the assistance of:
9 * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
10 * (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu)
11 *
12 * Initial work by:
13 * (c) 1999 Michael Gee (michael@linuxspecific.com)
14 *
15 * usb_device_id support by Adam J. Richter (adam@yggdrasil.com):
16 * (c) 2000 Yggdrasil Computing, Inc.
17 *
18 * This driver is based on the 'USB Mass Storage Class' document. This
19 * describes in detail the protocol used to communicate with such
20 * devices. Clearly, the designers had SCSI and ATAPI commands in
21 * mind when they created this document. The commands are all very
22 * similar to commands in the SCSI-II and ATAPI specifications.
23 *
24 * It is important to note that in a number of cases this class
25 * exhibits class-specific exemptions from the USB specification.
26 * Notably the usage of NAK, STALL and ACK differs from the norm, in
27 * that they are used to communicate wait, failed and OK on commands.
28 *
29 * Also, for certain devices, the interrupt endpoint is used to convey
30 * status of a command.
31 */
32
33#ifdef CONFIG_USB_STORAGE_DEBUG
34#define DEBUG
35#endif
36
37#include <linux/sched.h>
38#include <linux/errno.h>
39#include <linux/module.h>
40#include <linux/slab.h>
41#include <linux/kthread.h>
42#include <linux/mutex.h>
43#include <linux/utsname.h>
44
45#include <scsi/scsi.h>
46#include <scsi/scsi_cmnd.h>
47#include <scsi/scsi_device.h>
48
49#include "usb.h"
50#include "scsiglue.h"
51#include "transport.h"
52#include "protocol.h"
53#include "debug.h"
54#include "initializers.h"
55
56#include "sierra_ms.h"
57#include "option_ms.h"
58
59#if IS_ENABLED(CONFIG_USB_UAS)
60#include "uas-detect.h"
61#endif
62
63#define DRV_NAME "usb-storage"
64
65/* Some informational data */
66MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
67MODULE_DESCRIPTION("USB Mass Storage driver for Linux");
68MODULE_LICENSE("GPL");
69
70static unsigned int delay_use = 1;
71module_param(delay_use, uint, S_IRUGO | S_IWUSR);
72MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
73
74static char quirks[128];
75module_param_string(quirks, quirks, sizeof(quirks), S_IRUGO | S_IWUSR);
76MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
77
78
79/*
80 * The entries in this table correspond, line for line,
81 * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
82 */
83
84/*
85 *The vendor name should be kept at eight characters or less, and
86 * the product name should be kept at 16 characters or less. If a device
87 * has the US_FL_FIX_INQUIRY flag, then the vendor and product names
88 * normally generated by a device through the INQUIRY response will be
89 * taken from this list, and this is the reason for the above size
90 * restriction. However, if the flag is not present, then you
91 * are free to use as many characters as you like.
92 */
93
94#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
95 vendor_name, product_name, use_protocol, use_transport, \
96 init_function, Flags) \
97{ \
98 .vendorName = vendor_name, \
99 .productName = product_name, \
100 .useProtocol = use_protocol, \
101 .useTransport = use_transport, \
102 .initFunction = init_function, \
103}
104
105#define COMPLIANT_DEV UNUSUAL_DEV
106
107#define USUAL_DEV(use_protocol, use_transport) \
108{ \
109 .useProtocol = use_protocol, \
110 .useTransport = use_transport, \
111}
112
113#define UNUSUAL_VENDOR_INTF(idVendor, cl, sc, pr, \
114 vendor_name, product_name, use_protocol, use_transport, \
115 init_function, Flags) \
116{ \
117 .vendorName = vendor_name, \
118 .productName = product_name, \
119 .useProtocol = use_protocol, \
120 .useTransport = use_transport, \
121 .initFunction = init_function, \
122}
123
124static const struct us_unusual_dev us_unusual_dev_list[] = {
125# include "unusual_devs.h"
126 { } /* Terminating entry */
127};
128
129static const struct us_unusual_dev for_dynamic_ids =
130 USUAL_DEV(USB_SC_SCSI, USB_PR_BULK);
131
132#undef UNUSUAL_DEV
133#undef COMPLIANT_DEV
134#undef USUAL_DEV
135#undef UNUSUAL_VENDOR_INTF
136
137#ifdef CONFIG_LOCKDEP
138
139static struct lock_class_key us_interface_key[USB_MAXINTERFACES];
140
141static void us_set_lock_class(struct mutex *mutex,
142 struct usb_interface *intf)
143{
144 struct usb_device *udev = interface_to_usbdev(intf);
145 struct usb_host_config *config = udev->actconfig;
146 int i;
147
148 for (i = 0; i < config->desc.bNumInterfaces; i++) {
149 if (config->interface[i] == intf)
150 break;
151 }
152
153 BUG_ON(i == config->desc.bNumInterfaces);
154
155 lockdep_set_class(mutex, &us_interface_key[i]);
156}
157
158#else
159
160static void us_set_lock_class(struct mutex *mutex,
161 struct usb_interface *intf)
162{
163}
164
165#endif
166
167#ifdef CONFIG_PM /* Minimal support for suspend and resume */
168
169int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
170{
171 struct us_data *us = usb_get_intfdata(iface);
172
173 /* Wait until no command is running */
174 mutex_lock(&us->dev_mutex);
175
176 if (us->suspend_resume_hook)
177 (us->suspend_resume_hook)(us, US_SUSPEND);
178
179 /*
180 * When runtime PM is working, we'll set a flag to indicate
181 * whether we should autoresume when a SCSI request arrives.
182 */
183
184 mutex_unlock(&us->dev_mutex);
185 return 0;
186}
187EXPORT_SYMBOL_GPL(usb_stor_suspend);
188
189int usb_stor_resume(struct usb_interface *iface)
190{
191 struct us_data *us = usb_get_intfdata(iface);
192
193 mutex_lock(&us->dev_mutex);
194
195 if (us->suspend_resume_hook)
196 (us->suspend_resume_hook)(us, US_RESUME);
197
198 mutex_unlock(&us->dev_mutex);
199 return 0;
200}
201EXPORT_SYMBOL_GPL(usb_stor_resume);
202
203int usb_stor_reset_resume(struct usb_interface *iface)
204{
205 struct us_data *us = usb_get_intfdata(iface);
206
207 /* Report the reset to the SCSI core */
208 usb_stor_report_bus_reset(us);
209
210 /*
211 * If any of the subdrivers implemented a reinitialization scheme,
212 * this is where the callback would be invoked.
213 */
214 return 0;
215}
216EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
217
218#endif /* CONFIG_PM */
219
220/*
221 * The next two routines get called just before and just after
222 * a USB port reset, whether from this driver or a different one.
223 */
224
225int usb_stor_pre_reset(struct usb_interface *iface)
226{
227 struct us_data *us = usb_get_intfdata(iface);
228
229 /* Make sure no command runs during the reset */
230 mutex_lock(&us->dev_mutex);
231 return 0;
232}
233EXPORT_SYMBOL_GPL(usb_stor_pre_reset);
234
235int usb_stor_post_reset(struct usb_interface *iface)
236{
237 struct us_data *us = usb_get_intfdata(iface);
238
239 /* Report the reset to the SCSI core */
240 usb_stor_report_bus_reset(us);
241
242 /*
243 * If any of the subdrivers implemented a reinitialization scheme,
244 * this is where the callback would be invoked.
245 */
246
247 mutex_unlock(&us->dev_mutex);
248 return 0;
249}
250EXPORT_SYMBOL_GPL(usb_stor_post_reset);
251
252/*
253 * fill_inquiry_response takes an unsigned char array (which must
254 * be at least 36 characters) and populates the vendor name,
255 * product name, and revision fields. Then the array is copied
256 * into the SCSI command's response buffer (oddly enough
257 * called request_buffer). data_len contains the length of the
258 * data array, which again must be at least 36.
259 */
260
261void fill_inquiry_response(struct us_data *us, unsigned char *data,
262 unsigned int data_len)
263{
264 if (data_len < 36) /* You lose. */
265 return;
266
267 memset(data+8, ' ', 28);
268 if (data[0]&0x20) { /*
269 * USB device currently not connected. Return
270 * peripheral qualifier 001b ("...however, the
271 * physical device is not currently connected
272 * to this logical unit") and leave vendor and
273 * product identification empty. ("If the target
274 * does store some of the INQUIRY data on the
275 * device, it may return zeros or ASCII spaces
276 * (20h) in those fields until the data is
277 * available from the device.").
278 */
279 } else {
280 u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
281 int n;
282
283 n = strlen(us->unusual_dev->vendorName);
284 memcpy(data+8, us->unusual_dev->vendorName, min(8, n));
285 n = strlen(us->unusual_dev->productName);
286 memcpy(data+16, us->unusual_dev->productName, min(16, n));
287
288 data[32] = 0x30 + ((bcdDevice>>12) & 0x0F);
289 data[33] = 0x30 + ((bcdDevice>>8) & 0x0F);
290 data[34] = 0x30 + ((bcdDevice>>4) & 0x0F);
291 data[35] = 0x30 + ((bcdDevice) & 0x0F);
292 }
293
294 usb_stor_set_xfer_buf(data, data_len, us->srb);
295}
296EXPORT_SYMBOL_GPL(fill_inquiry_response);
297
298static int usb_stor_control_thread(void * __us)
299{
300 struct us_data *us = (struct us_data *)__us;
301 struct Scsi_Host *host = us_to_host(us);
302 struct scsi_cmnd *srb;
303
304 for (;;) {
305 usb_stor_dbg(us, "*** thread sleeping\n");
306 if (wait_for_completion_interruptible(&us->cmnd_ready))
307 break;
308
309 usb_stor_dbg(us, "*** thread awakened\n");
310
311 /* lock the device pointers */
312 mutex_lock(&(us->dev_mutex));
313
314 /* lock access to the state */
315 scsi_lock(host);
316
317 /* When we are called with no command pending, we're done */
318 srb = us->srb;
319 if (srb == NULL) {
320 scsi_unlock(host);
321 mutex_unlock(&us->dev_mutex);
322 usb_stor_dbg(us, "-- exiting\n");
323 break;
324 }
325
326 /* has the command timed out *already* ? */
327 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
328 srb->result = DID_ABORT << 16;
329 goto SkipForAbort;
330 }
331
332 scsi_unlock(host);
333
334 /*
335 * reject the command if the direction indicator
336 * is UNKNOWN
337 */
338 if (srb->sc_data_direction == DMA_BIDIRECTIONAL) {
339 usb_stor_dbg(us, "UNKNOWN data direction\n");
340 srb->result = DID_ERROR << 16;
341 }
342
343 /*
344 * reject if target != 0 or if LUN is higher than
345 * the maximum known LUN
346 */
347 else if (srb->device->id &&
348 !(us->fflags & US_FL_SCM_MULT_TARG)) {
349 usb_stor_dbg(us, "Bad target number (%d:%llu)\n",
350 srb->device->id,
351 srb->device->lun);
352 srb->result = DID_BAD_TARGET << 16;
353 }
354
355 else if (srb->device->lun > us->max_lun) {
356 usb_stor_dbg(us, "Bad LUN (%d:%llu)\n",
357 srb->device->id,
358 srb->device->lun);
359 srb->result = DID_BAD_TARGET << 16;
360 }
361
362 /*
363 * Handle those devices which need us to fake
364 * their inquiry data
365 */
366 else if ((srb->cmnd[0] == INQUIRY) &&
367 (us->fflags & US_FL_FIX_INQUIRY)) {
368 unsigned char data_ptr[36] = {
369 0x00, 0x80, 0x02, 0x02,
370 0x1F, 0x00, 0x00, 0x00};
371
372 usb_stor_dbg(us, "Faking INQUIRY command\n");
373 fill_inquiry_response(us, data_ptr, 36);
374 srb->result = SAM_STAT_GOOD;
375 }
376
377 /* we've got a command, let's do it! */
378 else {
379 US_DEBUG(usb_stor_show_command(us, srb));
380 us->proto_handler(srb, us);
381 usb_mark_last_busy(us->pusb_dev);
382 }
383
384 /* lock access to the state */
385 scsi_lock(host);
386
387 /* was the command aborted? */
388 if (srb->result == DID_ABORT << 16) {
389SkipForAbort:
390 usb_stor_dbg(us, "scsi command aborted\n");
391 srb = NULL; /* Don't call srb->scsi_done() */
392 }
393
394 /*
395 * If an abort request was received we need to signal that
396 * the abort has finished. The proper test for this is
397 * the TIMED_OUT flag, not srb->result == DID_ABORT, because
398 * the timeout might have occurred after the command had
399 * already completed with a different result code.
400 */
401 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
402 complete(&(us->notify));
403
404 /* Allow USB transfers to resume */
405 clear_bit(US_FLIDX_ABORTING, &us->dflags);
406 clear_bit(US_FLIDX_TIMED_OUT, &us->dflags);
407 }
408
409 /* finished working on this command */
410 us->srb = NULL;
411 scsi_unlock(host);
412
413 /* unlock the device pointers */
414 mutex_unlock(&us->dev_mutex);
415
416 /* now that the locks are released, notify the SCSI core */
417 if (srb) {
418 usb_stor_dbg(us, "scsi cmd done, result=0x%x\n",
419 srb->result);
420 srb->scsi_done(srb);
421 }
422 } /* for (;;) */
423
424 /* Wait until we are told to stop */
425 for (;;) {
426 set_current_state(TASK_INTERRUPTIBLE);
427 if (kthread_should_stop())
428 break;
429 schedule();
430 }
431 __set_current_state(TASK_RUNNING);
432 return 0;
433}
434
435/***********************************************************************
436 * Device probing and disconnecting
437 ***********************************************************************/
438
439/* Associate our private data with the USB device */
440static int associate_dev(struct us_data *us, struct usb_interface *intf)
441{
442 /* Fill in the device-related fields */
443 us->pusb_dev = interface_to_usbdev(intf);
444 us->pusb_intf = intf;
445 us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
446 usb_stor_dbg(us, "Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n",
447 le16_to_cpu(us->pusb_dev->descriptor.idVendor),
448 le16_to_cpu(us->pusb_dev->descriptor.idProduct),
449 le16_to_cpu(us->pusb_dev->descriptor.bcdDevice));
450 usb_stor_dbg(us, "Interface Subclass: 0x%02x, Protocol: 0x%02x\n",
451 intf->cur_altsetting->desc.bInterfaceSubClass,
452 intf->cur_altsetting->desc.bInterfaceProtocol);
453
454 /* Store our private data in the interface */
455 usb_set_intfdata(intf, us);
456
457 /* Allocate the control/setup and DMA-mapped buffers */
458 us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL);
459 if (!us->cr)
460 return -ENOMEM;
461
462 us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE,
463 GFP_KERNEL, &us->iobuf_dma);
464 if (!us->iobuf) {
465 usb_stor_dbg(us, "I/O buffer allocation failed\n");
466 return -ENOMEM;
467 }
468 return 0;
469}
470
471/* Works only for digits and letters, but small and fast */
472#define TOLOWER(x) ((x) | 0x20)
473
474/* Adjust device flags based on the "quirks=" module parameter */
475void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
476{
477 char *p;
478 u16 vid = le16_to_cpu(udev->descriptor.idVendor);
479 u16 pid = le16_to_cpu(udev->descriptor.idProduct);
480 unsigned f = 0;
481 unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
482 US_FL_FIX_CAPACITY | US_FL_IGNORE_UAS |
483 US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
484 US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
485 US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
486 US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
487 US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
488 US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
489 US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES |
490 US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS |
491 US_FL_ALWAYS_SYNC);
492
493 p = quirks;
494 while (*p) {
495 /* Each entry consists of VID:PID:flags */
496 if (vid == simple_strtoul(p, &p, 16) &&
497 *p == ':' &&
498 pid == simple_strtoul(p+1, &p, 16) &&
499 *p == ':')
500 break;
501
502 /* Move forward to the next entry */
503 while (*p) {
504 if (*p++ == ',')
505 break;
506 }
507 }
508 if (!*p) /* No match */
509 return;
510
511 /* Collect the flags */
512 while (*++p && *p != ',') {
513 switch (TOLOWER(*p)) {
514 case 'a':
515 f |= US_FL_SANE_SENSE;
516 break;
517 case 'b':
518 f |= US_FL_BAD_SENSE;
519 break;
520 case 'c':
521 f |= US_FL_FIX_CAPACITY;
522 break;
523 case 'd':
524 f |= US_FL_NO_READ_DISC_INFO;
525 break;
526 case 'e':
527 f |= US_FL_NO_READ_CAPACITY_16;
528 break;
529 case 'f':
530 f |= US_FL_NO_REPORT_OPCODES;
531 break;
532 case 'g':
533 f |= US_FL_MAX_SECTORS_240;
534 break;
535 case 'h':
536 f |= US_FL_CAPACITY_HEURISTICS;
537 break;
538 case 'i':
539 f |= US_FL_IGNORE_DEVICE;
540 break;
541 case 'j':
542 f |= US_FL_NO_REPORT_LUNS;
543 break;
544 case 'l':
545 f |= US_FL_NOT_LOCKABLE;
546 break;
547 case 'm':
548 f |= US_FL_MAX_SECTORS_64;
549 break;
550 case 'n':
551 f |= US_FL_INITIAL_READ10;
552 break;
553 case 'o':
554 f |= US_FL_CAPACITY_OK;
555 break;
556 case 'p':
557 f |= US_FL_WRITE_CACHE;
558 break;
559 case 'r':
560 f |= US_FL_IGNORE_RESIDUE;
561 break;
562 case 's':
563 f |= US_FL_SINGLE_LUN;
564 break;
565 case 't':
566 f |= US_FL_NO_ATA_1X;
567 break;
568 case 'u':
569 f |= US_FL_IGNORE_UAS;
570 break;
571 case 'w':
572 f |= US_FL_NO_WP_DETECT;
573 break;
574 case 'y':
575 f |= US_FL_ALWAYS_SYNC;
576 break;
577 /* Ignore unrecognized flag characters */
578 }
579 }
580 *fflags = (*fflags & ~mask) | f;
581}
582EXPORT_SYMBOL_GPL(usb_stor_adjust_quirks);
583
584/* Get the unusual_devs entries and the string descriptors */
585static int get_device_info(struct us_data *us, const struct usb_device_id *id,
586 const struct us_unusual_dev *unusual_dev)
587{
588 struct usb_device *dev = us->pusb_dev;
589 struct usb_interface_descriptor *idesc =
590 &us->pusb_intf->cur_altsetting->desc;
591 struct device *pdev = &us->pusb_intf->dev;
592
593 /* Store the entries */
594 us->unusual_dev = unusual_dev;
595 us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ?
596 idesc->bInterfaceSubClass :
597 unusual_dev->useProtocol;
598 us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ?
599 idesc->bInterfaceProtocol :
600 unusual_dev->useTransport;
601 us->fflags = id->driver_info;
602 usb_stor_adjust_quirks(us->pusb_dev, &us->fflags);
603
604 if (us->fflags & US_FL_IGNORE_DEVICE) {
605 dev_info(pdev, "device ignored\n");
606 return -ENODEV;
607 }
608
609 /*
610 * This flag is only needed when we're in high-speed, so let's
611 * disable it if we're in full-speed
612 */
613 if (dev->speed != USB_SPEED_HIGH)
614 us->fflags &= ~US_FL_GO_SLOW;
615
616 if (us->fflags)
617 dev_info(pdev, "Quirks match for vid %04x pid %04x: %lx\n",
618 le16_to_cpu(dev->descriptor.idVendor),
619 le16_to_cpu(dev->descriptor.idProduct),
620 us->fflags);
621
622 /*
623 * Log a message if a non-generic unusual_dev entry contains an
624 * unnecessary subclass or protocol override. This may stimulate
625 * reports from users that will help us remove unneeded entries
626 * from the unusual_devs.h table.
627 */
628 if (id->idVendor || id->idProduct) {
629 static const char *msgs[3] = {
630 "an unneeded SubClass entry",
631 "an unneeded Protocol entry",
632 "unneeded SubClass and Protocol entries"};
633 struct usb_device_descriptor *ddesc = &dev->descriptor;
634 int msg = -1;
635
636 if (unusual_dev->useProtocol != USB_SC_DEVICE &&
637 us->subclass == idesc->bInterfaceSubClass)
638 msg += 1;
639 if (unusual_dev->useTransport != USB_PR_DEVICE &&
640 us->protocol == idesc->bInterfaceProtocol)
641 msg += 2;
642 if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE))
643 dev_notice(pdev, "This device "
644 "(%04x,%04x,%04x S %02x P %02x)"
645 " has %s in unusual_devs.h (kernel"
646 " %s)\n"
647 " Please send a copy of this message to "
648 "<linux-usb@vger.kernel.org> and "
649 "<usb-storage@lists.one-eyed-alien.net>\n",
650 le16_to_cpu(ddesc->idVendor),
651 le16_to_cpu(ddesc->idProduct),
652 le16_to_cpu(ddesc->bcdDevice),
653 idesc->bInterfaceSubClass,
654 idesc->bInterfaceProtocol,
655 msgs[msg],
656 utsname()->release);
657 }
658
659 return 0;
660}
661
662/* Get the transport settings */
663static void get_transport(struct us_data *us)
664{
665 switch (us->protocol) {
666 case USB_PR_CB:
667 us->transport_name = "Control/Bulk";
668 us->transport = usb_stor_CB_transport;
669 us->transport_reset = usb_stor_CB_reset;
670 us->max_lun = 7;
671 break;
672
673 case USB_PR_CBI:
674 us->transport_name = "Control/Bulk/Interrupt";
675 us->transport = usb_stor_CB_transport;
676 us->transport_reset = usb_stor_CB_reset;
677 us->max_lun = 7;
678 break;
679
680 case USB_PR_BULK:
681 us->transport_name = "Bulk";
682 us->transport = usb_stor_Bulk_transport;
683 us->transport_reset = usb_stor_Bulk_reset;
684 break;
685 }
686}
687
688/* Get the protocol settings */
689static void get_protocol(struct us_data *us)
690{
691 switch (us->subclass) {
692 case USB_SC_RBC:
693 us->protocol_name = "Reduced Block Commands (RBC)";
694 us->proto_handler = usb_stor_transparent_scsi_command;
695 break;
696
697 case USB_SC_8020:
698 us->protocol_name = "8020i";
699 us->proto_handler = usb_stor_pad12_command;
700 us->max_lun = 0;
701 break;
702
703 case USB_SC_QIC:
704 us->protocol_name = "QIC-157";
705 us->proto_handler = usb_stor_pad12_command;
706 us->max_lun = 0;
707 break;
708
709 case USB_SC_8070:
710 us->protocol_name = "8070i";
711 us->proto_handler = usb_stor_pad12_command;
712 us->max_lun = 0;
713 break;
714
715 case USB_SC_SCSI:
716 us->protocol_name = "Transparent SCSI";
717 us->proto_handler = usb_stor_transparent_scsi_command;
718 break;
719
720 case USB_SC_UFI:
721 us->protocol_name = "Uniform Floppy Interface (UFI)";
722 us->proto_handler = usb_stor_ufi_command;
723 break;
724 }
725}
726
727/* Get the pipe settings */
728static int get_pipes(struct us_data *us)
729{
730 struct usb_host_interface *alt = us->pusb_intf->cur_altsetting;
731 struct usb_endpoint_descriptor *ep_in;
732 struct usb_endpoint_descriptor *ep_out;
733 struct usb_endpoint_descriptor *ep_int;
734 int res;
735
736 /*
737 * Find the first endpoint of each type we need.
738 * We are expecting a minimum of 2 endpoints - in and out (bulk).
739 * An optional interrupt-in is OK (necessary for CBI protocol).
740 * We will ignore any others.
741 */
742 res = usb_find_common_endpoints(alt, &ep_in, &ep_out, NULL, NULL);
743 if (res) {
744 usb_stor_dbg(us, "bulk endpoints not found\n");
745 return res;
746 }
747
748 res = usb_find_int_in_endpoint(alt, &ep_int);
749 if (res && us->protocol == USB_PR_CBI) {
750 usb_stor_dbg(us, "interrupt endpoint not found\n");
751 return res;
752 }
753
754 /* Calculate and store the pipe values */
755 us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
756 us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
757 us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
758 usb_endpoint_num(ep_out));
759 us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
760 usb_endpoint_num(ep_in));
761 if (ep_int) {
762 us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
763 usb_endpoint_num(ep_int));
764 us->ep_bInterval = ep_int->bInterval;
765 }
766 return 0;
767}
768
769/* Initialize all the dynamic resources we need */
770static int usb_stor_acquire_resources(struct us_data *us)
771{
772 int p;
773 struct task_struct *th;
774
775 us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
776 if (!us->current_urb)
777 return -ENOMEM;
778
779 /*
780 * Just before we start our control thread, initialize
781 * the device if it needs initialization
782 */
783 if (us->unusual_dev->initFunction) {
784 p = us->unusual_dev->initFunction(us);
785 if (p)
786 return p;
787 }
788
789 /* Start up our control thread */
790 th = kthread_run(usb_stor_control_thread, us, "usb-storage");
791 if (IS_ERR(th)) {
792 dev_warn(&us->pusb_intf->dev,
793 "Unable to start control thread\n");
794 return PTR_ERR(th);
795 }
796 us->ctl_thread = th;
797
798 return 0;
799}
800
801/* Release all our dynamic resources */
802static void usb_stor_release_resources(struct us_data *us)
803{
804 /*
805 * Tell the control thread to exit. The SCSI host must
806 * already have been removed and the DISCONNECTING flag set
807 * so that we won't accept any more commands.
808 */
809 usb_stor_dbg(us, "-- sending exit command to thread\n");
810 complete(&us->cmnd_ready);
811 if (us->ctl_thread)
812 kthread_stop(us->ctl_thread);
813
814 /* Call the destructor routine, if it exists */
815 if (us->extra_destructor) {
816 usb_stor_dbg(us, "-- calling extra_destructor()\n");
817 us->extra_destructor(us->extra);
818 }
819
820 /* Free the extra data and the URB */
821 kfree(us->extra);
822 usb_free_urb(us->current_urb);
823}
824
825/* Dissociate from the USB device */
826static void dissociate_dev(struct us_data *us)
827{
828 /* Free the buffers */
829 kfree(us->cr);
830 usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma);
831
832 /* Remove our private data from the interface */
833 usb_set_intfdata(us->pusb_intf, NULL);
834}
835
836/*
837 * First stage of disconnect processing: stop SCSI scanning,
838 * remove the host, and stop accepting new commands
839 */
840static void quiesce_and_remove_host(struct us_data *us)
841{
842 struct Scsi_Host *host = us_to_host(us);
843
844 /* If the device is really gone, cut short reset delays */
845 if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
846 set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
847 wake_up(&us->delay_wait);
848 }
849
850 /*
851 * Prevent SCSI scanning (if it hasn't started yet)
852 * or wait for the SCSI-scanning routine to stop.
853 */
854 cancel_delayed_work_sync(&us->scan_dwork);
855
856 /* Balance autopm calls if scanning was cancelled */
857 if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
858 usb_autopm_put_interface_no_suspend(us->pusb_intf);
859
860 /*
861 * Removing the host will perform an orderly shutdown: caches
862 * synchronized, disks spun down, etc.
863 */
864 scsi_remove_host(host);
865
866 /*
867 * Prevent any new commands from being accepted and cut short
868 * reset delays.
869 */
870 scsi_lock(host);
871 set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
872 scsi_unlock(host);
873 wake_up(&us->delay_wait);
874}
875
876/* Second stage of disconnect processing: deallocate all resources */
877static void release_everything(struct us_data *us)
878{
879 usb_stor_release_resources(us);
880 dissociate_dev(us);
881
882 /*
883 * Drop our reference to the host; the SCSI core will free it
884 * (and "us" along with it) when the refcount becomes 0.
885 */
886 scsi_host_put(us_to_host(us));
887}
888
889/* Delayed-work routine to carry out SCSI-device scanning */
890static void usb_stor_scan_dwork(struct work_struct *work)
891{
892 struct us_data *us = container_of(work, struct us_data,
893 scan_dwork.work);
894 struct device *dev = &us->pusb_intf->dev;
895
896 dev_dbg(dev, "starting scan\n");
897
898 /* For bulk-only devices, determine the max LUN value */
899 if (us->protocol == USB_PR_BULK &&
900 !(us->fflags & US_FL_SINGLE_LUN) &&
901 !(us->fflags & US_FL_SCM_MULT_TARG)) {
902 mutex_lock(&us->dev_mutex);
903 us->max_lun = usb_stor_Bulk_max_lun(us);
904 /*
905 * Allow proper scanning of devices that present more than 8 LUNs
906 * While not affecting other devices that may need the previous
907 * behavior
908 */
909 if (us->max_lun >= 8)
910 us_to_host(us)->max_lun = us->max_lun+1;
911 mutex_unlock(&us->dev_mutex);
912 }
913 scsi_scan_host(us_to_host(us));
914 dev_dbg(dev, "scan complete\n");
915
916 /* Should we unbind if no devices were detected? */
917
918 usb_autopm_put_interface(us->pusb_intf);
919 clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
920}
921
922static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
923{
924 struct usb_device *usb_dev = interface_to_usbdev(intf);
925
926 if (usb_dev->bus->sg_tablesize) {
927 return usb_dev->bus->sg_tablesize;
928 }
929 return SG_ALL;
930}
931
932/* First part of general USB mass-storage probing */
933int usb_stor_probe1(struct us_data **pus,
934 struct usb_interface *intf,
935 const struct usb_device_id *id,
936 const struct us_unusual_dev *unusual_dev,
937 struct scsi_host_template *sht)
938{
939 struct Scsi_Host *host;
940 struct us_data *us;
941 int result;
942
943 dev_info(&intf->dev, "USB Mass Storage device detected\n");
944
945 /*
946 * Ask the SCSI layer to allocate a host structure, with extra
947 * space at the end for our private us_data structure.
948 */
949 host = scsi_host_alloc(sht, sizeof(*us));
950 if (!host) {
951 dev_warn(&intf->dev, "Unable to allocate the scsi host\n");
952 return -ENOMEM;
953 }
954
955 /*
956 * Allow 16-byte CDBs and thus > 2TB
957 */
958 host->max_cmd_len = 16;
959 host->sg_tablesize = usb_stor_sg_tablesize(intf);
960 *pus = us = host_to_us(host);
961 mutex_init(&(us->dev_mutex));
962 us_set_lock_class(&us->dev_mutex, intf);
963 init_completion(&us->cmnd_ready);
964 init_completion(&(us->notify));
965 init_waitqueue_head(&us->delay_wait);
966 INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
967
968 /* Associate the us_data structure with the USB device */
969 result = associate_dev(us, intf);
970 if (result)
971 goto BadDevice;
972
973 /* Get the unusual_devs entries and the descriptors */
974 result = get_device_info(us, id, unusual_dev);
975 if (result)
976 goto BadDevice;
977
978 /* Get standard transport and protocol settings */
979 get_transport(us);
980 get_protocol(us);
981
982 /*
983 * Give the caller a chance to fill in specialized transport
984 * or protocol settings.
985 */
986 return 0;
987
988BadDevice:
989 usb_stor_dbg(us, "storage_probe() failed\n");
990 release_everything(us);
991 return result;
992}
993EXPORT_SYMBOL_GPL(usb_stor_probe1);
994
995/* Second part of general USB mass-storage probing */
996int usb_stor_probe2(struct us_data *us)
997{
998 int result;
999 struct device *dev = &us->pusb_intf->dev;
1000
1001 /* Make sure the transport and protocol have both been set */
1002 if (!us->transport || !us->proto_handler) {
1003 result = -ENXIO;
1004 goto BadDevice;
1005 }
1006 usb_stor_dbg(us, "Transport: %s\n", us->transport_name);
1007 usb_stor_dbg(us, "Protocol: %s\n", us->protocol_name);
1008
1009 if (us->fflags & US_FL_SCM_MULT_TARG) {
1010 /*
1011 * SCM eUSCSI bridge devices can have different numbers
1012 * of LUNs on different targets; allow all to be probed.
1013 */
1014 us->max_lun = 7;
1015 /* The eUSCSI itself has ID 7, so avoid scanning that */
1016 us_to_host(us)->this_id = 7;
1017 /* max_id is 8 initially, so no need to set it here */
1018 } else {
1019 /* In the normal case there is only a single target */
1020 us_to_host(us)->max_id = 1;
1021 /*
1022 * Like Windows, we won't store the LUN bits in CDB[1] for
1023 * SCSI-2 devices using the Bulk-Only transport (even though
1024 * this violates the SCSI spec).
1025 */
1026 if (us->transport == usb_stor_Bulk_transport)
1027 us_to_host(us)->no_scsi2_lun_in_cdb = 1;
1028 }
1029
1030 /* fix for single-lun devices */
1031 if (us->fflags & US_FL_SINGLE_LUN)
1032 us->max_lun = 0;
1033
1034 /* Find the endpoints and calculate pipe values */
1035 result = get_pipes(us);
1036 if (result)
1037 goto BadDevice;
1038
1039 /*
1040 * If the device returns invalid data for the first READ(10)
1041 * command, indicate the command should be retried.
1042 */
1043 if (us->fflags & US_FL_INITIAL_READ10)
1044 set_bit(US_FLIDX_REDO_READ10, &us->dflags);
1045
1046 /* Acquire all the other resources and add the host */
1047 result = usb_stor_acquire_resources(us);
1048 if (result)
1049 goto BadDevice;
1050 usb_autopm_get_interface_no_resume(us->pusb_intf);
1051 snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
1052 dev_name(&us->pusb_intf->dev));
1053 result = scsi_add_host(us_to_host(us), dev);
1054 if (result) {
1055 dev_warn(dev,
1056 "Unable to add the scsi host\n");
1057 goto HostAddErr;
1058 }
1059
1060 /* Submit the delayed_work for SCSI-device scanning */
1061 set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
1062
1063 if (delay_use > 0)
1064 dev_dbg(dev, "waiting for device to settle before scanning\n");
1065 queue_delayed_work(system_freezable_wq, &us->scan_dwork,
1066 delay_use * HZ);
1067 return 0;
1068
1069 /* We come here if there are any problems */
1070HostAddErr:
1071 usb_autopm_put_interface_no_suspend(us->pusb_intf);
1072BadDevice:
1073 usb_stor_dbg(us, "storage_probe() failed\n");
1074 release_everything(us);
1075 return result;
1076}
1077EXPORT_SYMBOL_GPL(usb_stor_probe2);
1078
1079/* Handle a USB mass-storage disconnect */
1080void usb_stor_disconnect(struct usb_interface *intf)
1081{
1082 struct us_data *us = usb_get_intfdata(intf);
1083
1084 quiesce_and_remove_host(us);
1085 release_everything(us);
1086}
1087EXPORT_SYMBOL_GPL(usb_stor_disconnect);
1088
1089static struct scsi_host_template usb_stor_host_template;
1090
1091/* The main probe routine for standard devices */
1092static int storage_probe(struct usb_interface *intf,
1093 const struct usb_device_id *id)
1094{
1095 const struct us_unusual_dev *unusual_dev;
1096 struct us_data *us;
1097 int result;
1098 int size;
1099
1100 /* If uas is enabled and this device can do uas then ignore it. */
1101#if IS_ENABLED(CONFIG_USB_UAS)
1102 if (uas_use_uas_driver(intf, id, NULL))
1103 return -ENXIO;
1104#endif
1105
1106 /*
1107 * If the device isn't standard (is handled by a subdriver
1108 * module) then don't accept it.
1109 */
1110 if (usb_usual_ignore_device(intf))
1111 return -ENXIO;
1112
1113 /*
1114 * Call the general probe procedures.
1115 *
1116 * The unusual_dev_list array is parallel to the usb_storage_usb_ids
1117 * table, so we use the index of the id entry to find the
1118 * corresponding unusual_devs entry.
1119 */
1120
1121 size = ARRAY_SIZE(us_unusual_dev_list);
1122 if (id >= usb_storage_usb_ids && id < usb_storage_usb_ids + size) {
1123 unusual_dev = (id - usb_storage_usb_ids) + us_unusual_dev_list;
1124 } else {
1125 unusual_dev = &for_dynamic_ids;
1126
1127 dev_dbg(&intf->dev, "Use Bulk-Only transport with the Transparent SCSI protocol for dynamic id: 0x%04x 0x%04x\n",
1128 id->idVendor, id->idProduct);
1129 }
1130
1131 result = usb_stor_probe1(&us, intf, id, unusual_dev,
1132 &usb_stor_host_template);
1133 if (result)
1134 return result;
1135
1136 /* No special transport or protocol settings in the main module */
1137
1138 result = usb_stor_probe2(us);
1139 return result;
1140}
1141
1142static struct usb_driver usb_storage_driver = {
1143 .name = DRV_NAME,
1144 .probe = storage_probe,
1145 .disconnect = usb_stor_disconnect,
1146 .suspend = usb_stor_suspend,
1147 .resume = usb_stor_resume,
1148 .reset_resume = usb_stor_reset_resume,
1149 .pre_reset = usb_stor_pre_reset,
1150 .post_reset = usb_stor_post_reset,
1151 .id_table = usb_storage_usb_ids,
1152 .supports_autosuspend = 1,
1153 .soft_unbind = 1,
1154};
1155
1156module_usb_stor_driver(usb_storage_driver, usb_stor_host_template, DRV_NAME);
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Driver for USB Mass Storage compliant devices
4 *
5 * Current development and maintenance by:
6 * (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
7 *
8 * Developed with the assistance of:
9 * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
10 * (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu)
11 *
12 * Initial work by:
13 * (c) 1999 Michael Gee (michael@linuxspecific.com)
14 *
15 * usb_device_id support by Adam J. Richter (adam@yggdrasil.com):
16 * (c) 2000 Yggdrasil Computing, Inc.
17 *
18 * This driver is based on the 'USB Mass Storage Class' document. This
19 * describes in detail the protocol used to communicate with such
20 * devices. Clearly, the designers had SCSI and ATAPI commands in
21 * mind when they created this document. The commands are all very
22 * similar to commands in the SCSI-II and ATAPI specifications.
23 *
24 * It is important to note that in a number of cases this class
25 * exhibits class-specific exemptions from the USB specification.
26 * Notably the usage of NAK, STALL and ACK differs from the norm, in
27 * that they are used to communicate wait, failed and OK on commands.
28 *
29 * Also, for certain devices, the interrupt endpoint is used to convey
30 * status of a command.
31 */
32
33#ifdef CONFIG_USB_STORAGE_DEBUG
34#define DEBUG
35#endif
36
37#include <linux/sched.h>
38#include <linux/errno.h>
39#include <linux/module.h>
40#include <linux/slab.h>
41#include <linux/kthread.h>
42#include <linux/mutex.h>
43#include <linux/utsname.h>
44
45#include <scsi/scsi.h>
46#include <scsi/scsi_cmnd.h>
47#include <scsi/scsi_device.h>
48
49#include "usb.h"
50#include <linux/usb/hcd.h>
51#include "scsiglue.h"
52#include "transport.h"
53#include "protocol.h"
54#include "debug.h"
55#include "initializers.h"
56
57#include "sierra_ms.h"
58#include "option_ms.h"
59
60#if IS_ENABLED(CONFIG_USB_UAS)
61#include "uas-detect.h"
62#endif
63
64#define DRV_NAME "usb-storage"
65
66/* Some informational data */
67MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
68MODULE_DESCRIPTION("USB Mass Storage driver for Linux");
69MODULE_LICENSE("GPL");
70
71static unsigned int delay_use = 1 * MSEC_PER_SEC;
72
73/**
74 * parse_delay_str - parse an unsigned decimal integer delay
75 * @str: String to parse.
76 * @ndecimals: Number of decimal to scale up.
77 * @suffix: Suffix string to parse.
78 * @val: Where to store the parsed value.
79 *
80 * Parse an unsigned decimal value in @str, optionally end with @suffix.
81 * Stores the parsed value in @val just as it is if @str ends with @suffix.
82 * Otherwise store the value scale up by 10^(@ndecimal).
83 *
84 * Returns 0 on success, a negative error code otherwise.
85 */
86static int parse_delay_str(const char *str, int ndecimals, const char *suffix,
87 unsigned int *val)
88{
89 int n, n2, l;
90 char buf[16];
91
92 l = strlen(suffix);
93 n = strlen(str);
94 if (n > 0 && str[n - 1] == '\n')
95 --n;
96 if (n >= l && !strncmp(&str[n - l], suffix, l)) {
97 n -= l;
98 n2 = 0;
99 } else
100 n2 = ndecimals;
101
102 if (n + n2 > sizeof(buf) - 1)
103 return -EINVAL;
104
105 memcpy(buf, str, n);
106 while (n2-- > 0)
107 buf[n++] = '0';
108 buf[n] = 0;
109
110 return kstrtouint(buf, 10, val);
111}
112
113/**
114 * format_delay_ms - format an integer value into a delay string
115 * @val: The integer value to format, scaled by 10^(@ndecimals).
116 * @ndecimals: Number of decimal to scale down.
117 * @suffix: Suffix string to format.
118 * @str: Where to store the formatted string.
119 * @size: The size of buffer for @str.
120 *
121 * Format an integer value in @val scale down by 10^(@ndecimals) without @suffix
122 * if @val is divisible by 10^(@ndecimals).
123 * Otherwise format a value in @val just as it is with @suffix
124 *
125 * Returns the number of characters written into @str.
126 */
127static int format_delay_ms(unsigned int val, int ndecimals, const char *suffix,
128 char *str, int size)
129{
130 u64 delay_ms = val;
131 unsigned int rem = do_div(delay_ms, int_pow(10, ndecimals));
132 int ret;
133
134 if (rem)
135 ret = scnprintf(str, size, "%u%s\n", val, suffix);
136 else
137 ret = scnprintf(str, size, "%u\n", (unsigned int)delay_ms);
138 return ret;
139}
140
141static int delay_use_set(const char *s, const struct kernel_param *kp)
142{
143 unsigned int delay_ms;
144 int ret;
145
146 ret = parse_delay_str(skip_spaces(s), 3, "ms", &delay_ms);
147 if (ret < 0)
148 return ret;
149
150 *((unsigned int *)kp->arg) = delay_ms;
151 return 0;
152}
153
154static int delay_use_get(char *s, const struct kernel_param *kp)
155{
156 unsigned int delay_ms = *((unsigned int *)kp->arg);
157
158 return format_delay_ms(delay_ms, 3, "ms", s, PAGE_SIZE);
159}
160
161static const struct kernel_param_ops delay_use_ops = {
162 .set = delay_use_set,
163 .get = delay_use_get,
164};
165module_param_cb(delay_use, &delay_use_ops, &delay_use, 0644);
166MODULE_PARM_DESC(delay_use, "time to delay before using a new device");
167
168static char quirks[128];
169module_param_string(quirks, quirks, sizeof(quirks), S_IRUGO | S_IWUSR);
170MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
171
172
173/*
174 * The entries in this table correspond, line for line,
175 * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
176 */
177
178/*
179 *The vendor name should be kept at eight characters or less, and
180 * the product name should be kept at 16 characters or less. If a device
181 * has the US_FL_FIX_INQUIRY flag, then the vendor and product names
182 * normally generated by a device through the INQUIRY response will be
183 * taken from this list, and this is the reason for the above size
184 * restriction. However, if the flag is not present, then you
185 * are free to use as many characters as you like.
186 */
187
188#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
189 vendor_name, product_name, use_protocol, use_transport, \
190 init_function, Flags) \
191{ \
192 .vendorName = vendor_name, \
193 .productName = product_name, \
194 .useProtocol = use_protocol, \
195 .useTransport = use_transport, \
196 .initFunction = init_function, \
197}
198
199#define COMPLIANT_DEV UNUSUAL_DEV
200
201#define USUAL_DEV(use_protocol, use_transport) \
202{ \
203 .useProtocol = use_protocol, \
204 .useTransport = use_transport, \
205}
206
207static const struct us_unusual_dev us_unusual_dev_list[] = {
208# include "unusual_devs.h"
209 { } /* Terminating entry */
210};
211
212static const struct us_unusual_dev for_dynamic_ids =
213 USUAL_DEV(USB_SC_SCSI, USB_PR_BULK);
214
215#undef UNUSUAL_DEV
216#undef COMPLIANT_DEV
217#undef USUAL_DEV
218
219#ifdef CONFIG_LOCKDEP
220
221static struct lock_class_key us_interface_key[USB_MAXINTERFACES];
222
223static void us_set_lock_class(struct mutex *mutex,
224 struct usb_interface *intf)
225{
226 struct usb_device *udev = interface_to_usbdev(intf);
227 struct usb_host_config *config = udev->actconfig;
228 int i;
229
230 for (i = 0; i < config->desc.bNumInterfaces; i++) {
231 if (config->interface[i] == intf)
232 break;
233 }
234
235 BUG_ON(i == config->desc.bNumInterfaces);
236
237 lockdep_set_class(mutex, &us_interface_key[i]);
238}
239
240#else
241
242static void us_set_lock_class(struct mutex *mutex,
243 struct usb_interface *intf)
244{
245}
246
247#endif
248
249#ifdef CONFIG_PM /* Minimal support for suspend and resume */
250
251int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
252{
253 struct us_data *us = usb_get_intfdata(iface);
254
255 /* Wait until no command is running */
256 mutex_lock(&us->dev_mutex);
257
258 if (us->suspend_resume_hook)
259 (us->suspend_resume_hook)(us, US_SUSPEND);
260
261 /*
262 * When runtime PM is working, we'll set a flag to indicate
263 * whether we should autoresume when a SCSI request arrives.
264 */
265
266 mutex_unlock(&us->dev_mutex);
267 return 0;
268}
269EXPORT_SYMBOL_GPL(usb_stor_suspend);
270
271int usb_stor_resume(struct usb_interface *iface)
272{
273 struct us_data *us = usb_get_intfdata(iface);
274
275 mutex_lock(&us->dev_mutex);
276
277 if (us->suspend_resume_hook)
278 (us->suspend_resume_hook)(us, US_RESUME);
279
280 mutex_unlock(&us->dev_mutex);
281 return 0;
282}
283EXPORT_SYMBOL_GPL(usb_stor_resume);
284
285int usb_stor_reset_resume(struct usb_interface *iface)
286{
287 struct us_data *us = usb_get_intfdata(iface);
288
289 /* Report the reset to the SCSI core */
290 usb_stor_report_bus_reset(us);
291
292 /*
293 * If any of the subdrivers implemented a reinitialization scheme,
294 * this is where the callback would be invoked.
295 */
296 return 0;
297}
298EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
299
300#endif /* CONFIG_PM */
301
302/*
303 * The next two routines get called just before and just after
304 * a USB port reset, whether from this driver or a different one.
305 */
306
307int usb_stor_pre_reset(struct usb_interface *iface)
308{
309 struct us_data *us = usb_get_intfdata(iface);
310
311 /* Make sure no command runs during the reset */
312 mutex_lock(&us->dev_mutex);
313 return 0;
314}
315EXPORT_SYMBOL_GPL(usb_stor_pre_reset);
316
317int usb_stor_post_reset(struct usb_interface *iface)
318{
319 struct us_data *us = usb_get_intfdata(iface);
320
321 /* Report the reset to the SCSI core */
322 usb_stor_report_bus_reset(us);
323
324 /*
325 * If any of the subdrivers implemented a reinitialization scheme,
326 * this is where the callback would be invoked.
327 */
328
329 mutex_unlock(&us->dev_mutex);
330 return 0;
331}
332EXPORT_SYMBOL_GPL(usb_stor_post_reset);
333
334/*
335 * fill_inquiry_response takes an unsigned char array (which must
336 * be at least 36 characters) and populates the vendor name,
337 * product name, and revision fields. Then the array is copied
338 * into the SCSI command's response buffer (oddly enough
339 * called request_buffer). data_len contains the length of the
340 * data array, which again must be at least 36.
341 */
342
343void fill_inquiry_response(struct us_data *us, unsigned char *data,
344 unsigned int data_len)
345{
346 if (data_len < 36) /* You lose. */
347 return;
348
349 memset(data+8, ' ', 28);
350 if (data[0]&0x20) { /*
351 * USB device currently not connected. Return
352 * peripheral qualifier 001b ("...however, the
353 * physical device is not currently connected
354 * to this logical unit") and leave vendor and
355 * product identification empty. ("If the target
356 * does store some of the INQUIRY data on the
357 * device, it may return zeros or ASCII spaces
358 * (20h) in those fields until the data is
359 * available from the device.").
360 */
361 } else {
362 u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
363 int n;
364
365 n = strlen(us->unusual_dev->vendorName);
366 memcpy(data+8, us->unusual_dev->vendorName, min(8, n));
367 n = strlen(us->unusual_dev->productName);
368 memcpy(data+16, us->unusual_dev->productName, min(16, n));
369
370 data[32] = 0x30 + ((bcdDevice>>12) & 0x0F);
371 data[33] = 0x30 + ((bcdDevice>>8) & 0x0F);
372 data[34] = 0x30 + ((bcdDevice>>4) & 0x0F);
373 data[35] = 0x30 + ((bcdDevice) & 0x0F);
374 }
375
376 usb_stor_set_xfer_buf(data, data_len, us->srb);
377}
378EXPORT_SYMBOL_GPL(fill_inquiry_response);
379
380static int usb_stor_control_thread(void * __us)
381{
382 struct us_data *us = (struct us_data *)__us;
383 struct Scsi_Host *host = us_to_host(us);
384 struct scsi_cmnd *srb;
385
386 for (;;) {
387 usb_stor_dbg(us, "*** thread sleeping\n");
388 if (wait_for_completion_interruptible(&us->cmnd_ready))
389 break;
390
391 usb_stor_dbg(us, "*** thread awakened\n");
392
393 /* lock the device pointers */
394 mutex_lock(&(us->dev_mutex));
395
396 /* lock access to the state */
397 scsi_lock(host);
398
399 /* When we are called with no command pending, we're done */
400 srb = us->srb;
401 if (srb == NULL) {
402 scsi_unlock(host);
403 mutex_unlock(&us->dev_mutex);
404 usb_stor_dbg(us, "-- exiting\n");
405 break;
406 }
407
408 /* has the command timed out *already* ? */
409 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
410 srb->result = DID_ABORT << 16;
411 goto SkipForAbort;
412 }
413
414 scsi_unlock(host);
415
416 /*
417 * reject the command if the direction indicator
418 * is UNKNOWN
419 */
420 if (srb->sc_data_direction == DMA_BIDIRECTIONAL) {
421 usb_stor_dbg(us, "UNKNOWN data direction\n");
422 srb->result = DID_ERROR << 16;
423 }
424
425 /*
426 * reject if target != 0 or if LUN is higher than
427 * the maximum known LUN
428 */
429 else if (srb->device->id &&
430 !(us->fflags & US_FL_SCM_MULT_TARG)) {
431 usb_stor_dbg(us, "Bad target number (%d:%llu)\n",
432 srb->device->id,
433 srb->device->lun);
434 srb->result = DID_BAD_TARGET << 16;
435 }
436
437 else if (srb->device->lun > us->max_lun) {
438 usb_stor_dbg(us, "Bad LUN (%d:%llu)\n",
439 srb->device->id,
440 srb->device->lun);
441 srb->result = DID_BAD_TARGET << 16;
442 }
443
444 /*
445 * Handle those devices which need us to fake
446 * their inquiry data
447 */
448 else if ((srb->cmnd[0] == INQUIRY) &&
449 (us->fflags & US_FL_FIX_INQUIRY)) {
450 unsigned char data_ptr[36] = {
451 0x00, 0x80, 0x02, 0x02,
452 0x1F, 0x00, 0x00, 0x00};
453
454 usb_stor_dbg(us, "Faking INQUIRY command\n");
455 fill_inquiry_response(us, data_ptr, 36);
456 srb->result = SAM_STAT_GOOD;
457 }
458
459 /* we've got a command, let's do it! */
460 else {
461 US_DEBUG(usb_stor_show_command(us, srb));
462 us->proto_handler(srb, us);
463 usb_mark_last_busy(us->pusb_dev);
464 }
465
466 /* lock access to the state */
467 scsi_lock(host);
468
469 /* was the command aborted? */
470 if (srb->result == DID_ABORT << 16) {
471SkipForAbort:
472 usb_stor_dbg(us, "scsi command aborted\n");
473 srb = NULL; /* Don't call scsi_done() */
474 }
475
476 /*
477 * If an abort request was received we need to signal that
478 * the abort has finished. The proper test for this is
479 * the TIMED_OUT flag, not srb->result == DID_ABORT, because
480 * the timeout might have occurred after the command had
481 * already completed with a different result code.
482 */
483 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
484 complete(&(us->notify));
485
486 /* Allow USB transfers to resume */
487 clear_bit(US_FLIDX_ABORTING, &us->dflags);
488 clear_bit(US_FLIDX_TIMED_OUT, &us->dflags);
489 }
490
491 /* finished working on this command */
492 us->srb = NULL;
493 scsi_unlock(host);
494
495 /* unlock the device pointers */
496 mutex_unlock(&us->dev_mutex);
497
498 /* now that the locks are released, notify the SCSI core */
499 if (srb) {
500 usb_stor_dbg(us, "scsi cmd done, result=0x%x\n",
501 srb->result);
502 scsi_done_direct(srb);
503 }
504 } /* for (;;) */
505
506 /* Wait until we are told to stop */
507 for (;;) {
508 set_current_state(TASK_INTERRUPTIBLE);
509 if (kthread_should_stop())
510 break;
511 schedule();
512 }
513 __set_current_state(TASK_RUNNING);
514 return 0;
515}
516
517/***********************************************************************
518 * Device probing and disconnecting
519 ***********************************************************************/
520
521/* Associate our private data with the USB device */
522static int associate_dev(struct us_data *us, struct usb_interface *intf)
523{
524 /* Fill in the device-related fields */
525 us->pusb_dev = interface_to_usbdev(intf);
526 us->pusb_intf = intf;
527 us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
528 usb_stor_dbg(us, "Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n",
529 le16_to_cpu(us->pusb_dev->descriptor.idVendor),
530 le16_to_cpu(us->pusb_dev->descriptor.idProduct),
531 le16_to_cpu(us->pusb_dev->descriptor.bcdDevice));
532 usb_stor_dbg(us, "Interface Subclass: 0x%02x, Protocol: 0x%02x\n",
533 intf->cur_altsetting->desc.bInterfaceSubClass,
534 intf->cur_altsetting->desc.bInterfaceProtocol);
535
536 /* Store our private data in the interface */
537 usb_set_intfdata(intf, us);
538
539 /* Allocate the control/setup and DMA-mapped buffers */
540 us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL);
541 if (!us->cr)
542 return -ENOMEM;
543
544 us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE,
545 GFP_KERNEL, &us->iobuf_dma);
546 if (!us->iobuf) {
547 usb_stor_dbg(us, "I/O buffer allocation failed\n");
548 return -ENOMEM;
549 }
550 return 0;
551}
552
553/* Works only for digits and letters, but small and fast */
554#define TOLOWER(x) ((x) | 0x20)
555
556/* Adjust device flags based on the "quirks=" module parameter */
557void usb_stor_adjust_quirks(struct usb_device *udev, u64 *fflags)
558{
559 char *p;
560 u16 vid = le16_to_cpu(udev->descriptor.idVendor);
561 u16 pid = le16_to_cpu(udev->descriptor.idProduct);
562 u64 f = 0;
563 u64 mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
564 US_FL_FIX_CAPACITY | US_FL_IGNORE_UAS |
565 US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
566 US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
567 US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
568 US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
569 US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
570 US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
571 US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES |
572 US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS |
573 US_FL_ALWAYS_SYNC);
574
575 p = quirks;
576 while (*p) {
577 /* Each entry consists of VID:PID:flags */
578 if (vid == simple_strtoul(p, &p, 16) &&
579 *p == ':' &&
580 pid == simple_strtoul(p+1, &p, 16) &&
581 *p == ':')
582 break;
583
584 /* Move forward to the next entry */
585 while (*p) {
586 if (*p++ == ',')
587 break;
588 }
589 }
590 if (!*p) /* No match */
591 return;
592
593 /* Collect the flags */
594 while (*++p && *p != ',') {
595 switch (TOLOWER(*p)) {
596 case 'a':
597 f |= US_FL_SANE_SENSE;
598 break;
599 case 'b':
600 f |= US_FL_BAD_SENSE;
601 break;
602 case 'c':
603 f |= US_FL_FIX_CAPACITY;
604 break;
605 case 'd':
606 f |= US_FL_NO_READ_DISC_INFO;
607 break;
608 case 'e':
609 f |= US_FL_NO_READ_CAPACITY_16;
610 break;
611 case 'f':
612 f |= US_FL_NO_REPORT_OPCODES;
613 break;
614 case 'g':
615 f |= US_FL_MAX_SECTORS_240;
616 break;
617 case 'h':
618 f |= US_FL_CAPACITY_HEURISTICS;
619 break;
620 case 'i':
621 f |= US_FL_IGNORE_DEVICE;
622 break;
623 case 'j':
624 f |= US_FL_NO_REPORT_LUNS;
625 break;
626 case 'k':
627 f |= US_FL_NO_SAME;
628 break;
629 case 'l':
630 f |= US_FL_NOT_LOCKABLE;
631 break;
632 case 'm':
633 f |= US_FL_MAX_SECTORS_64;
634 break;
635 case 'n':
636 f |= US_FL_INITIAL_READ10;
637 break;
638 case 'o':
639 f |= US_FL_CAPACITY_OK;
640 break;
641 case 'p':
642 f |= US_FL_WRITE_CACHE;
643 break;
644 case 'r':
645 f |= US_FL_IGNORE_RESIDUE;
646 break;
647 case 's':
648 f |= US_FL_SINGLE_LUN;
649 break;
650 case 't':
651 f |= US_FL_NO_ATA_1X;
652 break;
653 case 'u':
654 f |= US_FL_IGNORE_UAS;
655 break;
656 case 'w':
657 f |= US_FL_NO_WP_DETECT;
658 break;
659 case 'y':
660 f |= US_FL_ALWAYS_SYNC;
661 break;
662 /* Ignore unrecognized flag characters */
663 }
664 }
665 *fflags = (*fflags & ~mask) | f;
666}
667EXPORT_SYMBOL_GPL(usb_stor_adjust_quirks);
668
669/* Get the unusual_devs entries and the string descriptors */
670static int get_device_info(struct us_data *us, const struct usb_device_id *id,
671 const struct us_unusual_dev *unusual_dev)
672{
673 struct usb_device *dev = us->pusb_dev;
674 struct usb_interface_descriptor *idesc =
675 &us->pusb_intf->cur_altsetting->desc;
676 struct device *pdev = &us->pusb_intf->dev;
677
678 /* Store the entries */
679 us->unusual_dev = unusual_dev;
680 us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ?
681 idesc->bInterfaceSubClass :
682 unusual_dev->useProtocol;
683 us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ?
684 idesc->bInterfaceProtocol :
685 unusual_dev->useTransport;
686 us->fflags = id->driver_info;
687 usb_stor_adjust_quirks(us->pusb_dev, &us->fflags);
688
689 if (us->fflags & US_FL_IGNORE_DEVICE) {
690 dev_info(pdev, "device ignored\n");
691 return -ENODEV;
692 }
693
694 /*
695 * This flag is only needed when we're in high-speed, so let's
696 * disable it if we're in full-speed
697 */
698 if (dev->speed != USB_SPEED_HIGH)
699 us->fflags &= ~US_FL_GO_SLOW;
700
701 if (us->fflags)
702 dev_info(pdev, "Quirks match for vid %04x pid %04x: %llx\n",
703 le16_to_cpu(dev->descriptor.idVendor),
704 le16_to_cpu(dev->descriptor.idProduct),
705 us->fflags);
706
707 /*
708 * Log a message if a non-generic unusual_dev entry contains an
709 * unnecessary subclass or protocol override. This may stimulate
710 * reports from users that will help us remove unneeded entries
711 * from the unusual_devs.h table.
712 */
713 if (id->idVendor || id->idProduct) {
714 static const char *msgs[3] = {
715 "an unneeded SubClass entry",
716 "an unneeded Protocol entry",
717 "unneeded SubClass and Protocol entries"};
718 struct usb_device_descriptor *ddesc = &dev->descriptor;
719 int msg = -1;
720
721 if (unusual_dev->useProtocol != USB_SC_DEVICE &&
722 us->subclass == idesc->bInterfaceSubClass)
723 msg += 1;
724 if (unusual_dev->useTransport != USB_PR_DEVICE &&
725 us->protocol == idesc->bInterfaceProtocol)
726 msg += 2;
727 if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE))
728 dev_notice(pdev, "This device "
729 "(%04x,%04x,%04x S %02x P %02x)"
730 " has %s in unusual_devs.h (kernel"
731 " %s)\n"
732 " Please send a copy of this message to "
733 "<linux-usb@vger.kernel.org> and "
734 "<usb-storage@lists.one-eyed-alien.net>\n",
735 le16_to_cpu(ddesc->idVendor),
736 le16_to_cpu(ddesc->idProduct),
737 le16_to_cpu(ddesc->bcdDevice),
738 idesc->bInterfaceSubClass,
739 idesc->bInterfaceProtocol,
740 msgs[msg],
741 utsname()->release);
742 }
743
744 return 0;
745}
746
747/* Get the transport settings */
748static void get_transport(struct us_data *us)
749{
750 switch (us->protocol) {
751 case USB_PR_CB:
752 us->transport_name = "Control/Bulk";
753 us->transport = usb_stor_CB_transport;
754 us->transport_reset = usb_stor_CB_reset;
755 us->max_lun = 7;
756 break;
757
758 case USB_PR_CBI:
759 us->transport_name = "Control/Bulk/Interrupt";
760 us->transport = usb_stor_CB_transport;
761 us->transport_reset = usb_stor_CB_reset;
762 us->max_lun = 7;
763 break;
764
765 case USB_PR_BULK:
766 us->transport_name = "Bulk";
767 us->transport = usb_stor_Bulk_transport;
768 us->transport_reset = usb_stor_Bulk_reset;
769 break;
770 }
771}
772
773/* Get the protocol settings */
774static void get_protocol(struct us_data *us)
775{
776 switch (us->subclass) {
777 case USB_SC_RBC:
778 us->protocol_name = "Reduced Block Commands (RBC)";
779 us->proto_handler = usb_stor_transparent_scsi_command;
780 break;
781
782 case USB_SC_8020:
783 us->protocol_name = "8020i";
784 us->proto_handler = usb_stor_pad12_command;
785 us->max_lun = 0;
786 break;
787
788 case USB_SC_QIC:
789 us->protocol_name = "QIC-157";
790 us->proto_handler = usb_stor_pad12_command;
791 us->max_lun = 0;
792 break;
793
794 case USB_SC_8070:
795 us->protocol_name = "8070i";
796 us->proto_handler = usb_stor_pad12_command;
797 us->max_lun = 0;
798 break;
799
800 case USB_SC_SCSI:
801 us->protocol_name = "Transparent SCSI";
802 us->proto_handler = usb_stor_transparent_scsi_command;
803 break;
804
805 case USB_SC_UFI:
806 us->protocol_name = "Uniform Floppy Interface (UFI)";
807 us->proto_handler = usb_stor_ufi_command;
808 break;
809 }
810}
811
812/* Get the pipe settings */
813static int get_pipes(struct us_data *us)
814{
815 struct usb_host_interface *alt = us->pusb_intf->cur_altsetting;
816 struct usb_endpoint_descriptor *ep_in;
817 struct usb_endpoint_descriptor *ep_out;
818 struct usb_endpoint_descriptor *ep_int;
819 int res;
820
821 /*
822 * Find the first endpoint of each type we need.
823 * We are expecting a minimum of 2 endpoints - in and out (bulk).
824 * An optional interrupt-in is OK (necessary for CBI protocol).
825 * We will ignore any others.
826 */
827 res = usb_find_common_endpoints(alt, &ep_in, &ep_out, NULL, NULL);
828 if (res) {
829 usb_stor_dbg(us, "bulk endpoints not found\n");
830 return res;
831 }
832
833 res = usb_find_int_in_endpoint(alt, &ep_int);
834 if (res && us->protocol == USB_PR_CBI) {
835 usb_stor_dbg(us, "interrupt endpoint not found\n");
836 return res;
837 }
838
839 /* Calculate and store the pipe values */
840 us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
841 us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
842 us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
843 usb_endpoint_num(ep_out));
844 us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
845 usb_endpoint_num(ep_in));
846 if (ep_int) {
847 us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
848 usb_endpoint_num(ep_int));
849 us->ep_bInterval = ep_int->bInterval;
850 }
851 return 0;
852}
853
854/* Initialize all the dynamic resources we need */
855static int usb_stor_acquire_resources(struct us_data *us)
856{
857 int p;
858 struct task_struct *th;
859
860 us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
861 if (!us->current_urb)
862 return -ENOMEM;
863
864 /*
865 * Just before we start our control thread, initialize
866 * the device if it needs initialization
867 */
868 if (us->unusual_dev->initFunction) {
869 p = us->unusual_dev->initFunction(us);
870 if (p)
871 return p;
872 }
873
874 /* Start up our control thread */
875 th = kthread_run(usb_stor_control_thread, us, "usb-storage");
876 if (IS_ERR(th)) {
877 dev_warn(&us->pusb_intf->dev,
878 "Unable to start control thread\n");
879 return PTR_ERR(th);
880 }
881 us->ctl_thread = th;
882
883 return 0;
884}
885
886/* Release all our dynamic resources */
887static void usb_stor_release_resources(struct us_data *us)
888{
889 /*
890 * Tell the control thread to exit. The SCSI host must
891 * already have been removed and the DISCONNECTING flag set
892 * so that we won't accept any more commands.
893 */
894 usb_stor_dbg(us, "-- sending exit command to thread\n");
895 complete(&us->cmnd_ready);
896 if (us->ctl_thread)
897 kthread_stop(us->ctl_thread);
898
899 /* Call the destructor routine, if it exists */
900 if (us->extra_destructor) {
901 usb_stor_dbg(us, "-- calling extra_destructor()\n");
902 us->extra_destructor(us->extra);
903 }
904
905 /* Free the extra data and the URB */
906 kfree(us->extra);
907 usb_free_urb(us->current_urb);
908}
909
910/* Dissociate from the USB device */
911static void dissociate_dev(struct us_data *us)
912{
913 /* Free the buffers */
914 kfree(us->cr);
915 usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma);
916
917 /* Remove our private data from the interface */
918 usb_set_intfdata(us->pusb_intf, NULL);
919}
920
921/*
922 * First stage of disconnect processing: stop SCSI scanning,
923 * remove the host, and stop accepting new commands
924 */
925static void quiesce_and_remove_host(struct us_data *us)
926{
927 struct Scsi_Host *host = us_to_host(us);
928
929 /* If the device is really gone, cut short reset delays */
930 if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
931 set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
932 wake_up(&us->delay_wait);
933 }
934
935 /*
936 * Prevent SCSI scanning (if it hasn't started yet)
937 * or wait for the SCSI-scanning routine to stop.
938 */
939 cancel_delayed_work_sync(&us->scan_dwork);
940
941 /* Balance autopm calls if scanning was cancelled */
942 if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
943 usb_autopm_put_interface_no_suspend(us->pusb_intf);
944
945 /*
946 * Removing the host will perform an orderly shutdown: caches
947 * synchronized, disks spun down, etc.
948 */
949 scsi_remove_host(host);
950
951 /*
952 * Prevent any new commands from being accepted and cut short
953 * reset delays.
954 */
955 scsi_lock(host);
956 set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
957 scsi_unlock(host);
958 wake_up(&us->delay_wait);
959}
960
961/* Second stage of disconnect processing: deallocate all resources */
962static void release_everything(struct us_data *us)
963{
964 usb_stor_release_resources(us);
965 dissociate_dev(us);
966
967 /*
968 * Drop our reference to the host; the SCSI core will free it
969 * (and "us" along with it) when the refcount becomes 0.
970 */
971 scsi_host_put(us_to_host(us));
972}
973
974/* Delayed-work routine to carry out SCSI-device scanning */
975static void usb_stor_scan_dwork(struct work_struct *work)
976{
977 struct us_data *us = container_of(work, struct us_data,
978 scan_dwork.work);
979 struct device *dev = &us->pusb_intf->dev;
980
981 dev_dbg(dev, "starting scan\n");
982
983 /* For bulk-only devices, determine the max LUN value */
984 if (us->protocol == USB_PR_BULK &&
985 !(us->fflags & US_FL_SINGLE_LUN) &&
986 !(us->fflags & US_FL_SCM_MULT_TARG)) {
987 mutex_lock(&us->dev_mutex);
988 us->max_lun = usb_stor_Bulk_max_lun(us);
989 /*
990 * Allow proper scanning of devices that present more than 8 LUNs
991 * While not affecting other devices that may need the previous
992 * behavior
993 */
994 if (us->max_lun >= 8)
995 us_to_host(us)->max_lun = us->max_lun+1;
996 mutex_unlock(&us->dev_mutex);
997 }
998 scsi_scan_host(us_to_host(us));
999 dev_dbg(dev, "scan complete\n");
1000
1001 /* Should we unbind if no devices were detected? */
1002
1003 usb_autopm_put_interface(us->pusb_intf);
1004 clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
1005}
1006
1007static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
1008{
1009 struct usb_device *usb_dev = interface_to_usbdev(intf);
1010
1011 if (usb_dev->bus->sg_tablesize) {
1012 return usb_dev->bus->sg_tablesize;
1013 }
1014 return SG_ALL;
1015}
1016
1017/* First part of general USB mass-storage probing */
1018int usb_stor_probe1(struct us_data **pus,
1019 struct usb_interface *intf,
1020 const struct usb_device_id *id,
1021 const struct us_unusual_dev *unusual_dev,
1022 const struct scsi_host_template *sht)
1023{
1024 struct Scsi_Host *host;
1025 struct us_data *us;
1026 int result;
1027
1028 dev_info(&intf->dev, "USB Mass Storage device detected\n");
1029
1030 /*
1031 * Ask the SCSI layer to allocate a host structure, with extra
1032 * space at the end for our private us_data structure.
1033 */
1034 host = scsi_host_alloc(sht, sizeof(*us));
1035 if (!host) {
1036 dev_warn(&intf->dev, "Unable to allocate the scsi host\n");
1037 return -ENOMEM;
1038 }
1039
1040 /*
1041 * Allow 16-byte CDBs and thus > 2TB
1042 */
1043 host->max_cmd_len = 16;
1044 host->sg_tablesize = usb_stor_sg_tablesize(intf);
1045 *pus = us = host_to_us(host);
1046 mutex_init(&(us->dev_mutex));
1047 us_set_lock_class(&us->dev_mutex, intf);
1048 init_completion(&us->cmnd_ready);
1049 init_completion(&(us->notify));
1050 init_waitqueue_head(&us->delay_wait);
1051 INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
1052
1053 /* Associate the us_data structure with the USB device */
1054 result = associate_dev(us, intf);
1055 if (result)
1056 goto BadDevice;
1057
1058 /*
1059 * Some USB host controllers can't do DMA; they have to use PIO.
1060 * For such controllers we need to make sure the block layer sets
1061 * up bounce buffers in addressable memory.
1062 */
1063 if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) ||
1064 bus_to_hcd(us->pusb_dev->bus)->localmem_pool)
1065 host->no_highmem = true;
1066
1067 /* Get the unusual_devs entries and the descriptors */
1068 result = get_device_info(us, id, unusual_dev);
1069 if (result)
1070 goto BadDevice;
1071
1072 /* Get standard transport and protocol settings */
1073 get_transport(us);
1074 get_protocol(us);
1075
1076 /*
1077 * Give the caller a chance to fill in specialized transport
1078 * or protocol settings.
1079 */
1080 return 0;
1081
1082BadDevice:
1083 usb_stor_dbg(us, "storage_probe() failed\n");
1084 release_everything(us);
1085 return result;
1086}
1087EXPORT_SYMBOL_GPL(usb_stor_probe1);
1088
1089/* Second part of general USB mass-storage probing */
1090int usb_stor_probe2(struct us_data *us)
1091{
1092 int result;
1093 struct device *dev = &us->pusb_intf->dev;
1094
1095 /* Make sure the transport and protocol have both been set */
1096 if (!us->transport || !us->proto_handler) {
1097 result = -ENXIO;
1098 goto BadDevice;
1099 }
1100 usb_stor_dbg(us, "Transport: %s\n", us->transport_name);
1101 usb_stor_dbg(us, "Protocol: %s\n", us->protocol_name);
1102
1103 if (us->fflags & US_FL_SCM_MULT_TARG) {
1104 /*
1105 * SCM eUSCSI bridge devices can have different numbers
1106 * of LUNs on different targets; allow all to be probed.
1107 */
1108 us->max_lun = 7;
1109 /* The eUSCSI itself has ID 7, so avoid scanning that */
1110 us_to_host(us)->this_id = 7;
1111 /* max_id is 8 initially, so no need to set it here */
1112 } else {
1113 /* In the normal case there is only a single target */
1114 us_to_host(us)->max_id = 1;
1115 /*
1116 * Like Windows, we won't store the LUN bits in CDB[1] for
1117 * SCSI-2 devices using the Bulk-Only transport (even though
1118 * this violates the SCSI spec).
1119 */
1120 if (us->transport == usb_stor_Bulk_transport)
1121 us_to_host(us)->no_scsi2_lun_in_cdb = 1;
1122 }
1123
1124 /* fix for single-lun devices */
1125 if (us->fflags & US_FL_SINGLE_LUN)
1126 us->max_lun = 0;
1127
1128 /* Find the endpoints and calculate pipe values */
1129 result = get_pipes(us);
1130 if (result)
1131 goto BadDevice;
1132
1133 /*
1134 * If the device returns invalid data for the first READ(10)
1135 * command, indicate the command should be retried.
1136 */
1137 if (us->fflags & US_FL_INITIAL_READ10)
1138 set_bit(US_FLIDX_REDO_READ10, &us->dflags);
1139
1140 /* Acquire all the other resources and add the host */
1141 result = usb_stor_acquire_resources(us);
1142 if (result)
1143 goto BadDevice;
1144 usb_autopm_get_interface_no_resume(us->pusb_intf);
1145 snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
1146 dev_name(&us->pusb_intf->dev));
1147 result = scsi_add_host(us_to_host(us), dev);
1148 if (result) {
1149 dev_warn(dev,
1150 "Unable to add the scsi host\n");
1151 goto HostAddErr;
1152 }
1153
1154 /* Submit the delayed_work for SCSI-device scanning */
1155 set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
1156
1157 if (delay_use > 0)
1158 dev_dbg(dev, "waiting for device to settle before scanning\n");
1159 queue_delayed_work(system_freezable_wq, &us->scan_dwork,
1160 msecs_to_jiffies(delay_use));
1161 return 0;
1162
1163 /* We come here if there are any problems */
1164HostAddErr:
1165 usb_autopm_put_interface_no_suspend(us->pusb_intf);
1166BadDevice:
1167 usb_stor_dbg(us, "storage_probe() failed\n");
1168 release_everything(us);
1169 return result;
1170}
1171EXPORT_SYMBOL_GPL(usb_stor_probe2);
1172
1173/* Handle a USB mass-storage disconnect */
1174void usb_stor_disconnect(struct usb_interface *intf)
1175{
1176 struct us_data *us = usb_get_intfdata(intf);
1177
1178 quiesce_and_remove_host(us);
1179 release_everything(us);
1180}
1181EXPORT_SYMBOL_GPL(usb_stor_disconnect);
1182
1183static struct scsi_host_template usb_stor_host_template;
1184
1185/* The main probe routine for standard devices */
1186static int storage_probe(struct usb_interface *intf,
1187 const struct usb_device_id *id)
1188{
1189 const struct us_unusual_dev *unusual_dev;
1190 struct us_data *us;
1191 int result;
1192 int size;
1193
1194 /* If uas is enabled and this device can do uas then ignore it. */
1195#if IS_ENABLED(CONFIG_USB_UAS)
1196 if (uas_use_uas_driver(intf, id, NULL))
1197 return -ENXIO;
1198#endif
1199
1200 /*
1201 * If the device isn't standard (is handled by a subdriver
1202 * module) then don't accept it.
1203 */
1204 if (usb_usual_ignore_device(intf))
1205 return -ENXIO;
1206
1207 /*
1208 * Call the general probe procedures.
1209 *
1210 * The unusual_dev_list array is parallel to the usb_storage_usb_ids
1211 * table, so we use the index of the id entry to find the
1212 * corresponding unusual_devs entry.
1213 */
1214
1215 size = ARRAY_SIZE(us_unusual_dev_list);
1216 if (id >= usb_storage_usb_ids && id < usb_storage_usb_ids + size) {
1217 unusual_dev = (id - usb_storage_usb_ids) + us_unusual_dev_list;
1218 } else {
1219 unusual_dev = &for_dynamic_ids;
1220
1221 dev_dbg(&intf->dev, "Use Bulk-Only transport with the Transparent SCSI protocol for dynamic id: 0x%04x 0x%04x\n",
1222 id->idVendor, id->idProduct);
1223 }
1224
1225 result = usb_stor_probe1(&us, intf, id, unusual_dev,
1226 &usb_stor_host_template);
1227 if (result)
1228 return result;
1229
1230 /* No special transport or protocol settings in the main module */
1231
1232 result = usb_stor_probe2(us);
1233 return result;
1234}
1235
1236static struct usb_driver usb_storage_driver = {
1237 .name = DRV_NAME,
1238 .probe = storage_probe,
1239 .disconnect = usb_stor_disconnect,
1240 .suspend = usb_stor_suspend,
1241 .resume = usb_stor_resume,
1242 .reset_resume = usb_stor_reset_resume,
1243 .pre_reset = usb_stor_pre_reset,
1244 .post_reset = usb_stor_post_reset,
1245 .id_table = usb_storage_usb_ids,
1246 .supports_autosuspend = 1,
1247 .soft_unbind = 1,
1248};
1249
1250module_usb_stor_driver(usb_storage_driver, usb_stor_host_template, DRV_NAME);