Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2/* ld script to make ARM Linux kernel
3 * taken from the i386 version by Russell King
4 * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
5 */
6
7/* No __ro_after_init data in the .rodata section - which will always be ro */
8#define RO_AFTER_INIT_DATA
9
10#include <linux/sizes.h>
11
12#include <asm-generic/vmlinux.lds.h>
13#include <asm/cache.h>
14#include <asm/thread_info.h>
15#include <asm/memory.h>
16#include <asm/mpu.h>
17#include <asm/page.h>
18
19#include "vmlinux.lds.h"
20
21OUTPUT_ARCH(arm)
22ENTRY(stext)
23
24#ifndef __ARMEB__
25jiffies = jiffies_64;
26#else
27jiffies = jiffies_64 + 4;
28#endif
29
30SECTIONS
31{
32 /*
33 * XXX: The linker does not define how output sections are
34 * assigned to input sections when there are multiple statements
35 * matching the same input section name. There is no documented
36 * order of matching.
37 *
38 * unwind exit sections must be discarded before the rest of the
39 * unwind sections get included.
40 */
41 /DISCARD/ : {
42 ARM_DISCARD
43 *(.alt.smp.init)
44 *(.pv_table)
45 }
46
47 . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
48 _xiprom = .; /* XIP ROM area to be mapped */
49
50 .head.text : {
51 _text = .;
52 HEAD_TEXT
53 }
54
55 .text : { /* Real text segment */
56 _stext = .; /* Text and read-only data */
57 ARM_TEXT
58 }
59
60 RO_DATA(PAGE_SIZE)
61
62 . = ALIGN(4);
63 __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
64 __start___ex_table = .;
65 ARM_MMU_KEEP(*(__ex_table))
66 __stop___ex_table = .;
67 }
68
69#ifdef CONFIG_ARM_UNWIND
70 ARM_UNWIND_SECTIONS
71#endif
72
73 _etext = .; /* End of text and rodata section */
74
75 ARM_VECTORS
76 INIT_TEXT_SECTION(8)
77 .exit.text : {
78 ARM_EXIT_KEEP(EXIT_TEXT)
79 }
80 .init.proc.info : {
81 ARM_CPU_DISCARD(PROC_INFO)
82 }
83 .init.arch.info : {
84 __arch_info_begin = .;
85 *(.arch.info.init)
86 __arch_info_end = .;
87 }
88 .init.tagtable : {
89 __tagtable_begin = .;
90 *(.taglist.init)
91 __tagtable_end = .;
92 }
93 .init.rodata : {
94 INIT_SETUP(16)
95 INIT_CALLS
96 CON_INITCALL
97 INIT_RAM_FS
98 }
99
100#ifdef CONFIG_ARM_MPU
101 . = ALIGN(SZ_128K);
102#endif
103 _exiprom = .; /* End of XIP ROM area */
104
105/*
106 * From this point, stuff is considered writable and will be copied to RAM
107 */
108 __data_loc = ALIGN(4); /* location in file */
109 . = PAGE_OFFSET + TEXT_OFFSET; /* location in memory */
110#undef LOAD_OFFSET
111#define LOAD_OFFSET (PAGE_OFFSET + TEXT_OFFSET - __data_loc)
112
113 . = ALIGN(THREAD_SIZE);
114 _sdata = .;
115 RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
116 .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
117 *(.data..ro_after_init)
118 }
119 _edata = .;
120
121 . = ALIGN(PAGE_SIZE);
122 __init_begin = .;
123 .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
124 INIT_DATA
125 }
126 .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
127 ARM_EXIT_KEEP(EXIT_DATA)
128 }
129#ifdef CONFIG_SMP
130 PERCPU_SECTION(L1_CACHE_BYTES)
131#endif
132
133#ifdef CONFIG_HAVE_TCM
134 ARM_TCM
135#endif
136
137 /*
138 * End of copied data. We need a dummy section to get its LMA.
139 * Also located before final ALIGN() as trailing padding is not stored
140 * in the resulting binary file and useless to copy.
141 */
142 .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
143 _edata_loc = LOADADDR(.data.endmark);
144
145 . = ALIGN(PAGE_SIZE);
146 __init_end = .;
147
148 BSS_SECTION(0, 0, 8)
149#ifdef CONFIG_ARM_MPU
150 . = ALIGN(PMSAv8_MINALIGN);
151#endif
152 _end = .;
153
154 STABS_DEBUG
155}
156
157/*
158 * These must never be empty
159 * If you have to comment these two assert statements out, your
160 * binutils is too old (for other reasons as well)
161 */
162ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
163ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
164
165#ifdef CONFIG_XIP_DEFLATED_DATA
166/*
167 * The .bss is used as a stack area for __inflate_kernel_data() whose stack
168 * frame is 9568 bytes. Make sure it has extra room left.
169 */
170ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA")
171#endif
172
173#ifdef CONFIG_ARM_MPU
174/*
175 * Due to PMSAv7 restriction on base address and size we have to
176 * enforce minimal alignment restrictions. It was seen that weaker
177 * alignment restriction on _xiprom will likely force XIP address
178 * space spawns multiple MPU regions thus it is likely we run in
179 * situation when we are reprogramming MPU region we run on with
180 * something which doesn't cover reprogramming code itself, so as soon
181 * as we update MPU settings we'd immediately try to execute straight
182 * from background region which is XN.
183 * It seem that alignment in 1M should suit most users.
184 * _exiprom is aligned as 1/8 of 1M so can be covered by subregion
185 * disable
186 */
187ASSERT(!(_xiprom & (SZ_1M - 1)), "XIP start address may cause MPU programming issues")
188ASSERT(!(_exiprom & (SZ_128K - 1)), "XIP end address may cause MPU programming issues")
189#endif
1/* SPDX-License-Identifier: GPL-2.0 */
2/* ld script to make ARM Linux kernel
3 * taken from the i386 version by Russell King
4 * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
5 */
6
7/* No __ro_after_init data in the .rodata section - which will always be ro */
8#define RO_AFTER_INIT_DATA
9
10#include <linux/sizes.h>
11
12#include <asm-generic/vmlinux.lds.h>
13#include <asm/cache.h>
14#include <asm/thread_info.h>
15#include <asm/memory.h>
16#include <asm/mpu.h>
17#include <asm/page.h>
18
19#include "vmlinux.lds.h"
20
21OUTPUT_ARCH(arm)
22ENTRY(stext)
23
24#ifndef __ARMEB__
25jiffies = jiffies_64;
26#else
27jiffies = jiffies_64 + 4;
28#endif
29
30SECTIONS
31{
32 /*
33 * XXX: The linker does not define how output sections are
34 * assigned to input sections when there are multiple statements
35 * matching the same input section name. There is no documented
36 * order of matching.
37 *
38 * unwind exit sections must be discarded before the rest of the
39 * unwind sections get included.
40 */
41 /DISCARD/ : {
42 ARM_DISCARD
43 *(.alt.smp.init)
44 *(.pv_table)
45 }
46
47 . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
48 _xiprom = .; /* XIP ROM area to be mapped */
49
50 .head.text : {
51 _text = .;
52 HEAD_TEXT
53 }
54
55 .text : { /* Real text segment */
56 _stext = .; /* Text and read-only data */
57 ARM_TEXT
58 }
59
60 RO_DATA(PAGE_SIZE)
61
62 . = ALIGN(4);
63 __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
64 __start___ex_table = .;
65 ARM_MMU_KEEP(*(__ex_table))
66 __stop___ex_table = .;
67 }
68
69#ifdef CONFIG_ARM_UNWIND
70 ARM_UNWIND_SECTIONS
71#endif
72
73 NOTES
74
75 _etext = .; /* End of text and rodata section */
76
77 ARM_VECTORS
78 INIT_TEXT_SECTION(8)
79 .exit.text : {
80 ARM_EXIT_KEEP(EXIT_TEXT)
81 }
82 .init.proc.info : {
83 ARM_CPU_DISCARD(PROC_INFO)
84 }
85 .init.arch.info : {
86 __arch_info_begin = .;
87 *(.arch.info.init)
88 __arch_info_end = .;
89 }
90 .init.tagtable : {
91 __tagtable_begin = .;
92 *(.taglist.init)
93 __tagtable_end = .;
94 }
95 .init.rodata : {
96 INIT_SETUP(16)
97 INIT_CALLS
98 CON_INITCALL
99 INIT_RAM_FS
100 }
101
102#ifdef CONFIG_ARM_MPU
103 . = ALIGN(SZ_128K);
104#endif
105 _exiprom = .; /* End of XIP ROM area */
106
107/*
108 * From this point, stuff is considered writable and will be copied to RAM
109 */
110 __data_loc = ALIGN(4); /* location in file */
111 . = PAGE_OFFSET + TEXT_OFFSET; /* location in memory */
112#undef LOAD_OFFSET
113#define LOAD_OFFSET (PAGE_OFFSET + TEXT_OFFSET - __data_loc)
114
115 . = ALIGN(THREAD_SIZE);
116 _sdata = .;
117 RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
118 .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
119 *(.data..ro_after_init)
120 }
121 _edata = .;
122
123 . = ALIGN(PAGE_SIZE);
124 __init_begin = .;
125 .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
126 INIT_DATA
127 }
128 .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
129 ARM_EXIT_KEEP(EXIT_DATA)
130 }
131#ifdef CONFIG_SMP
132 PERCPU_SECTION(L1_CACHE_BYTES)
133#endif
134
135#ifdef CONFIG_HAVE_TCM
136 ARM_TCM
137#endif
138
139 /*
140 * End of copied data. We need a dummy section to get its LMA.
141 * Also located before final ALIGN() as trailing padding is not stored
142 * in the resulting binary file and useless to copy.
143 */
144 .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
145 _edata_loc = LOADADDR(.data.endmark);
146
147 . = ALIGN(PAGE_SIZE);
148 __init_end = .;
149
150 BSS_SECTION(0, 0, 8)
151#ifdef CONFIG_ARM_MPU
152 . = ALIGN(PMSAv8_MINALIGN);
153#endif
154 _end = .;
155
156 STABS_DEBUG
157}
158
159/*
160 * These must never be empty
161 * If you have to comment these two assert statements out, your
162 * binutils is too old (for other reasons as well)
163 */
164ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
165ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
166
167/*
168 * The HYP init code can't be more than a page long,
169 * and should not cross a page boundary.
170 * The above comment applies as well.
171 */
172ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE,
173 "HYP init code too big or misaligned")
174
175#ifdef CONFIG_XIP_DEFLATED_DATA
176/*
177 * The .bss is used as a stack area for __inflate_kernel_data() whose stack
178 * frame is 9568 bytes. Make sure it has extra room left.
179 */
180ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA")
181#endif
182
183#ifdef CONFIG_ARM_MPU
184/*
185 * Due to PMSAv7 restriction on base address and size we have to
186 * enforce minimal alignment restrictions. It was seen that weaker
187 * alignment restriction on _xiprom will likely force XIP address
188 * space spawns multiple MPU regions thus it is likely we run in
189 * situation when we are reprogramming MPU region we run on with
190 * something which doesn't cover reprogramming code itself, so as soon
191 * as we update MPU settings we'd immediately try to execute straight
192 * from background region which is XN.
193 * It seem that alignment in 1M should suit most users.
194 * _exiprom is aligned as 1/8 of 1M so can be covered by subregion
195 * disable
196 */
197ASSERT(!(_xiprom & (SZ_1M - 1)), "XIP start address may cause MPU programming issues")
198ASSERT(!(_exiprom & (SZ_128K - 1)), "XIP end address may cause MPU programming issues")
199#endif