Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2#ifndef __HEAD_BOOKE_H__
3#define __HEAD_BOOKE_H__
4
5#include <asm/ptrace.h> /* for STACK_FRAME_REGS_MARKER */
6#include <asm/kvm_asm.h>
7#include <asm/kvm_booke_hv_asm.h>
8
9#ifdef __ASSEMBLY__
10
11/*
12 * Macros used for common Book-e exception handling
13 */
14
15#define SET_IVOR(vector_number, vector_label) \
16 li r26,vector_label@l; \
17 mtspr SPRN_IVOR##vector_number,r26; \
18 sync
19
20#if (THREAD_SHIFT < 15)
21#define ALLOC_STACK_FRAME(reg, val) \
22 addi reg,reg,val
23#else
24#define ALLOC_STACK_FRAME(reg, val) \
25 addis reg,reg,val@ha; \
26 addi reg,reg,val@l
27#endif
28
29/*
30 * Macro used to get to thread save registers.
31 * Note that entries 0-3 are used for the prolog code, and the remaining
32 * entries are available for specific exception use in the event a handler
33 * requires more than 4 scratch registers.
34 */
35#define THREAD_NORMSAVE(offset) (THREAD_NORMSAVES + (offset * 4))
36
37#ifdef CONFIG_PPC_FSL_BOOK3E
38#define BOOKE_CLEAR_BTB(reg) \
39START_BTB_FLUSH_SECTION \
40 BTB_FLUSH(reg) \
41END_BTB_FLUSH_SECTION
42#else
43#define BOOKE_CLEAR_BTB(reg)
44#endif
45
46
47#define NORMAL_EXCEPTION_PROLOG(intno) \
48 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \
49 mfspr r10, SPRN_SPRG_THREAD; \
50 stw r11, THREAD_NORMSAVE(0)(r10); \
51 stw r13, THREAD_NORMSAVE(2)(r10); \
52 mfcr r13; /* save CR in r13 for now */\
53 mfspr r11, SPRN_SRR1; \
54 DO_KVM BOOKE_INTERRUPT_##intno SPRN_SRR1; \
55 andi. r11, r11, MSR_PR; /* check whether user or kernel */\
56 mr r11, r1; \
57 beq 1f; \
58 BOOKE_CLEAR_BTB(r11) \
59 /* if from user, start at top of this thread's kernel stack */ \
60 lwz r11, TASK_STACK - THREAD(r10); \
61 ALLOC_STACK_FRAME(r11, THREAD_SIZE); \
621 : subi r11, r11, INT_FRAME_SIZE; /* Allocate exception frame */ \
63 stw r13, _CCR(r11); /* save various registers */ \
64 stw r12,GPR12(r11); \
65 stw r9,GPR9(r11); \
66 mfspr r13, SPRN_SPRG_RSCRATCH0; \
67 stw r13, GPR10(r11); \
68 lwz r12, THREAD_NORMSAVE(0)(r10); \
69 stw r12,GPR11(r11); \
70 lwz r13, THREAD_NORMSAVE(2)(r10); /* restore r13 */ \
71 mflr r10; \
72 stw r10,_LINK(r11); \
73 mfspr r12,SPRN_SRR0; \
74 stw r1, GPR1(r11); \
75 mfspr r9,SPRN_SRR1; \
76 stw r1, 0(r11); \
77 mr r1, r11; \
78 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
79 stw r0,GPR0(r11); \
80 lis r10, STACK_FRAME_REGS_MARKER@ha;/* exception frame marker */ \
81 addi r10, r10, STACK_FRAME_REGS_MARKER@l; \
82 stw r10, 8(r11); \
83 SAVE_4GPRS(3, r11); \
84 SAVE_2GPRS(7, r11)
85
86.macro SYSCALL_ENTRY trapno intno srr1
87 mfspr r10, SPRN_SPRG_THREAD
88#ifdef CONFIG_KVM_BOOKE_HV
89BEGIN_FTR_SECTION
90 mtspr SPRN_SPRG_WSCRATCH0, r10
91 stw r11, THREAD_NORMSAVE(0)(r10)
92 stw r13, THREAD_NORMSAVE(2)(r10)
93 mfcr r13 /* save CR in r13 for now */
94 mfspr r11, SPRN_SRR1
95 mtocrf 0x80, r11 /* check MSR[GS] without clobbering reg */
96 bf 3, 1975f
97 b kvmppc_handler_\intno\()_\srr1
981975:
99 mr r12, r13
100 lwz r13, THREAD_NORMSAVE(2)(r10)
101FTR_SECTION_ELSE
102#endif
103 mfcr r12
104#ifdef CONFIG_KVM_BOOKE_HV
105ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
106#endif
107 mfspr r9, SPRN_SRR1
108 BOOKE_CLEAR_BTB(r11)
109 andi. r11, r9, MSR_PR
110 lwz r11, TASK_STACK - THREAD(r10)
111 rlwinm r12,r12,0,4,2 /* Clear SO bit in CR */
112 beq- 99f
113 ALLOC_STACK_FRAME(r11, THREAD_SIZE - INT_FRAME_SIZE)
114 stw r12, _CCR(r11) /* save various registers */
115 mflr r12
116 stw r12,_LINK(r11)
117 mfspr r12,SPRN_SRR0
118 stw r1, GPR1(r11)
119 stw r1, 0(r11)
120 mr r1, r11
121 stw r12,_NIP(r11)
122 rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */
123 lis r12, STACK_FRAME_REGS_MARKER@ha /* exception frame marker */
124 stw r2,GPR2(r11)
125 addi r12, r12, STACK_FRAME_REGS_MARKER@l
126 stw r9,_MSR(r11)
127 li r2, \trapno + 1
128 stw r12, 8(r11)
129 stw r2,_TRAP(r11)
130 SAVE_GPR(0, r11)
131 SAVE_4GPRS(3, r11)
132 SAVE_2GPRS(7, r11)
133
134 addi r11,r1,STACK_FRAME_OVERHEAD
135 addi r2,r10,-THREAD
136 stw r11,PT_REGS(r10)
137 /* Check to see if the dbcr0 register is set up to debug. Use the
138 internal debug mode bit to do this. */
139 lwz r12,THREAD_DBCR0(r10)
140 andis. r12,r12,DBCR0_IDM@h
141 ACCOUNT_CPU_USER_ENTRY(r2, r11, r12)
142 beq+ 3f
143 /* From user and task is ptraced - load up global dbcr0 */
144 li r12,-1 /* clear all pending debug events */
145 mtspr SPRN_DBSR,r12
146 lis r11,global_dbcr0@ha
147 tophys(r11,r11)
148 addi r11,r11,global_dbcr0@l
149#ifdef CONFIG_SMP
150 lwz r10, TASK_CPU(r2)
151 slwi r10, r10, 3
152 add r11, r11, r10
153#endif
154 lwz r12,0(r11)
155 mtspr SPRN_DBCR0,r12
156 lwz r12,4(r11)
157 addi r12,r12,-1
158 stw r12,4(r11)
159
1603:
161 tovirt(r2, r2) /* set r2 to current */
162 lis r11, transfer_to_syscall@h
163 ori r11, r11, transfer_to_syscall@l
164#ifdef CONFIG_TRACE_IRQFLAGS
165 /*
166 * If MSR is changing we need to keep interrupts disabled at this point
167 * otherwise we might risk taking an interrupt before we tell lockdep
168 * they are enabled.
169 */
170 lis r10, MSR_KERNEL@h
171 ori r10, r10, MSR_KERNEL@l
172 rlwimi r10, r9, 0, MSR_EE
173#else
174 lis r10, (MSR_KERNEL | MSR_EE)@h
175 ori r10, r10, (MSR_KERNEL | MSR_EE)@l
176#endif
177 mtspr SPRN_SRR1,r10
178 mtspr SPRN_SRR0,r11
179 SYNC
180 RFI /* jump to handler, enable MMU */
18199: b ret_from_kernel_syscall
182.endm
183
184/* To handle the additional exception priority levels on 40x and Book-E
185 * processors we allocate a stack per additional priority level.
186 *
187 * On 40x critical is the only additional level
188 * On 44x/e500 we have critical and machine check
189 * On e200 we have critical and debug (machine check occurs via critical)
190 *
191 * Additionally we reserve a SPRG for each priority level so we can free up a
192 * GPR to use as the base for indirect access to the exception stacks. This
193 * is necessary since the MMU is always on, for Book-E parts, and the stacks
194 * are offset from KERNELBASE.
195 *
196 * There is some space optimization to be had here if desired. However
197 * to allow for a common kernel with support for debug exceptions either
198 * going to critical or their own debug level we aren't currently
199 * providing configurations that micro-optimize space usage.
200 */
201
202#define MC_STACK_BASE mcheckirq_ctx
203#define CRIT_STACK_BASE critirq_ctx
204
205/* only on e500mc/e200 */
206#define DBG_STACK_BASE dbgirq_ctx
207
208#define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
209
210#ifdef CONFIG_SMP
211#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
212 mfspr r8,SPRN_PIR; \
213 slwi r8,r8,2; \
214 addis r8,r8,level##_STACK_BASE@ha; \
215 lwz r8,level##_STACK_BASE@l(r8); \
216 addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
217#else
218#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
219 lis r8,level##_STACK_BASE@ha; \
220 lwz r8,level##_STACK_BASE@l(r8); \
221 addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
222#endif
223
224/*
225 * Exception prolog for critical/machine check exceptions. This is a
226 * little different from the normal exception prolog above since a
227 * critical/machine check exception can potentially occur at any point
228 * during normal exception processing. Thus we cannot use the same SPRG
229 * registers as the normal prolog above. Instead we use a portion of the
230 * critical/machine check exception stack at low physical addresses.
231 */
232#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, intno, exc_level_srr0, exc_level_srr1) \
233 mtspr SPRN_SPRG_WSCRATCH_##exc_level,r8; \
234 BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
235 stw r9,GPR9(r8); /* save various registers */\
236 mfcr r9; /* save CR in r9 for now */\
237 stw r10,GPR10(r8); \
238 stw r11,GPR11(r8); \
239 stw r9,_CCR(r8); /* save CR on stack */\
240 mfspr r11,exc_level_srr1; /* check whether user or kernel */\
241 DO_KVM BOOKE_INTERRUPT_##intno exc_level_srr1; \
242 BOOKE_CLEAR_BTB(r10) \
243 andi. r11,r11,MSR_PR; \
244 mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
245 lwz r11, TASK_STACK - THREAD(r11); /* this thread's kernel stack */\
246 addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\
247 beq 1f; \
248 /* COMING FROM USER MODE */ \
249 stw r9,_CCR(r11); /* save CR */\
250 lwz r10,GPR10(r8); /* copy regs from exception stack */\
251 lwz r9,GPR9(r8); \
252 stw r10,GPR10(r11); \
253 lwz r10,GPR11(r8); \
254 stw r9,GPR9(r11); \
255 stw r10,GPR11(r11); \
256 b 2f; \
257 /* COMING FROM PRIV MODE */ \
2581: mr r11, r8; \
2592: mfspr r8,SPRN_SPRG_RSCRATCH_##exc_level; \
260 stw r12,GPR12(r11); /* save various registers */\
261 mflr r10; \
262 stw r10,_LINK(r11); \
263 mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
264 stw r12,_DEAR(r11); /* since they may have had stuff */\
265 mfspr r9,SPRN_ESR; /* in them at the point where the */\
266 stw r9,_ESR(r11); /* exception was taken */\
267 mfspr r12,exc_level_srr0; \
268 stw r1,GPR1(r11); \
269 mfspr r9,exc_level_srr1; \
270 stw r1,0(r11); \
271 mr r1,r11; \
272 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
273 stw r0,GPR0(r11); \
274 SAVE_4GPRS(3, r11); \
275 SAVE_2GPRS(7, r11)
276
277#define CRITICAL_EXCEPTION_PROLOG(intno) \
278 EXC_LEVEL_EXCEPTION_PROLOG(CRIT, intno, SPRN_CSRR0, SPRN_CSRR1)
279#define DEBUG_EXCEPTION_PROLOG \
280 EXC_LEVEL_EXCEPTION_PROLOG(DBG, DEBUG, SPRN_DSRR0, SPRN_DSRR1)
281#define MCHECK_EXCEPTION_PROLOG \
282 EXC_LEVEL_EXCEPTION_PROLOG(MC, MACHINE_CHECK, \
283 SPRN_MCSRR0, SPRN_MCSRR1)
284
285/*
286 * Guest Doorbell -- this is a bit odd in that uses GSRR0/1 despite
287 * being delivered to the host. This exception can only happen
288 * inside a KVM guest -- so we just handle up to the DO_KVM rather
289 * than try to fit this into one of the existing prolog macros.
290 */
291#define GUEST_DOORBELL_EXCEPTION \
292 START_EXCEPTION(GuestDoorbell); \
293 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \
294 mfspr r10, SPRN_SPRG_THREAD; \
295 stw r11, THREAD_NORMSAVE(0)(r10); \
296 mfspr r11, SPRN_SRR1; \
297 stw r13, THREAD_NORMSAVE(2)(r10); \
298 mfcr r13; /* save CR in r13 for now */\
299 DO_KVM BOOKE_INTERRUPT_GUEST_DBELL SPRN_GSRR1; \
300 trap
301
302/*
303 * Exception vectors.
304 */
305#define START_EXCEPTION(label) \
306 .align 5; \
307label:
308
309#define EXCEPTION(n, intno, label, hdlr, xfer) \
310 START_EXCEPTION(label); \
311 NORMAL_EXCEPTION_PROLOG(intno); \
312 addi r3,r1,STACK_FRAME_OVERHEAD; \
313 xfer(n, hdlr)
314
315#define CRITICAL_EXCEPTION(n, intno, label, hdlr) \
316 START_EXCEPTION(label); \
317 CRITICAL_EXCEPTION_PROLOG(intno); \
318 addi r3,r1,STACK_FRAME_OVERHEAD; \
319 EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
320 crit_transfer_to_handler, ret_from_crit_exc)
321
322#define MCHECK_EXCEPTION(n, label, hdlr) \
323 START_EXCEPTION(label); \
324 MCHECK_EXCEPTION_PROLOG; \
325 mfspr r5,SPRN_ESR; \
326 stw r5,_ESR(r11); \
327 addi r3,r1,STACK_FRAME_OVERHEAD; \
328 EXC_XFER_TEMPLATE(hdlr, n+4, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
329 mcheck_transfer_to_handler, ret_from_mcheck_exc)
330
331#define EXC_XFER_TEMPLATE(hdlr, trap, msr, tfer, ret) \
332 li r10,trap; \
333 stw r10,_TRAP(r11); \
334 lis r10,msr@h; \
335 ori r10,r10,msr@l; \
336 bl tfer; \
337 .long hdlr; \
338 .long ret
339
340#define EXC_XFER_STD(n, hdlr) \
341 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, transfer_to_handler_full, \
342 ret_from_except_full)
343
344#define EXC_XFER_LITE(n, hdlr) \
345 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, transfer_to_handler, \
346 ret_from_except)
347
348/* Check for a single step debug exception while in an exception
349 * handler before state has been saved. This is to catch the case
350 * where an instruction that we are trying to single step causes
351 * an exception (eg ITLB/DTLB miss) and thus the first instruction of
352 * the exception handler generates a single step debug exception.
353 *
354 * If we get a debug trap on the first instruction of an exception handler,
355 * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
356 * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
357 * The exception handler was handling a non-critical interrupt, so it will
358 * save (and later restore) the MSR via SPRN_CSRR1, which will still have
359 * the MSR_DE bit set.
360 */
361#define DEBUG_DEBUG_EXCEPTION \
362 START_EXCEPTION(DebugDebug); \
363 DEBUG_EXCEPTION_PROLOG; \
364 \
365 /* \
366 * If there is a single step or branch-taken exception in an \
367 * exception entry sequence, it was probably meant to apply to \
368 * the code where the exception occurred (since exception entry \
369 * doesn't turn off DE automatically). We simulate the effect \
370 * of turning off DE on entry to an exception handler by turning \
371 * off DE in the DSRR1 value and clearing the debug status. \
372 */ \
373 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
374 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
375 beq+ 2f; \
376 \
377 lis r10,interrupt_base@h; /* check if exception in vectors */ \
378 ori r10,r10,interrupt_base@l; \
379 cmplw r12,r10; \
380 blt+ 2f; /* addr below exception vectors */ \
381 \
382 lis r10,interrupt_end@h; \
383 ori r10,r10,interrupt_end@l; \
384 cmplw r12,r10; \
385 bgt+ 2f; /* addr above exception vectors */ \
386 \
387 /* here it looks like we got an inappropriate debug exception. */ \
3881: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \
389 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
390 mtspr SPRN_DBSR,r10; \
391 /* restore state and get out */ \
392 lwz r10,_CCR(r11); \
393 lwz r0,GPR0(r11); \
394 lwz r1,GPR1(r11); \
395 mtcrf 0x80,r10; \
396 mtspr SPRN_DSRR0,r12; \
397 mtspr SPRN_DSRR1,r9; \
398 lwz r9,GPR9(r11); \
399 lwz r12,GPR12(r11); \
400 mtspr SPRN_SPRG_WSCRATCH_DBG,r8; \
401 BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \
402 lwz r10,GPR10(r8); \
403 lwz r11,GPR11(r8); \
404 mfspr r8,SPRN_SPRG_RSCRATCH_DBG; \
405 \
406 PPC_RFDI; \
407 b .; \
408 \
409 /* continue normal handling for a debug exception... */ \
4102: mfspr r4,SPRN_DBSR; \
411 addi r3,r1,STACK_FRAME_OVERHEAD; \
412 EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), debug_transfer_to_handler, ret_from_debug_exc)
413
414#define DEBUG_CRIT_EXCEPTION \
415 START_EXCEPTION(DebugCrit); \
416 CRITICAL_EXCEPTION_PROLOG(DEBUG); \
417 \
418 /* \
419 * If there is a single step or branch-taken exception in an \
420 * exception entry sequence, it was probably meant to apply to \
421 * the code where the exception occurred (since exception entry \
422 * doesn't turn off DE automatically). We simulate the effect \
423 * of turning off DE on entry to an exception handler by turning \
424 * off DE in the CSRR1 value and clearing the debug status. \
425 */ \
426 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
427 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
428 beq+ 2f; \
429 \
430 lis r10,interrupt_base@h; /* check if exception in vectors */ \
431 ori r10,r10,interrupt_base@l; \
432 cmplw r12,r10; \
433 blt+ 2f; /* addr below exception vectors */ \
434 \
435 lis r10,interrupt_end@h; \
436 ori r10,r10,interrupt_end@l; \
437 cmplw r12,r10; \
438 bgt+ 2f; /* addr above exception vectors */ \
439 \
440 /* here it looks like we got an inappropriate debug exception. */ \
4411: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CSRR1 value */ \
442 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
443 mtspr SPRN_DBSR,r10; \
444 /* restore state and get out */ \
445 lwz r10,_CCR(r11); \
446 lwz r0,GPR0(r11); \
447 lwz r1,GPR1(r11); \
448 mtcrf 0x80,r10; \
449 mtspr SPRN_CSRR0,r12; \
450 mtspr SPRN_CSRR1,r9; \
451 lwz r9,GPR9(r11); \
452 lwz r12,GPR12(r11); \
453 mtspr SPRN_SPRG_WSCRATCH_CRIT,r8; \
454 BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \
455 lwz r10,GPR10(r8); \
456 lwz r11,GPR11(r8); \
457 mfspr r8,SPRN_SPRG_RSCRATCH_CRIT; \
458 \
459 rfci; \
460 b .; \
461 \
462 /* continue normal handling for a critical exception... */ \
4632: mfspr r4,SPRN_DBSR; \
464 addi r3,r1,STACK_FRAME_OVERHEAD; \
465 EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), crit_transfer_to_handler, ret_from_crit_exc)
466
467#define DATA_STORAGE_EXCEPTION \
468 START_EXCEPTION(DataStorage) \
469 NORMAL_EXCEPTION_PROLOG(DATA_STORAGE); \
470 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
471 stw r5,_ESR(r11); \
472 mfspr r4,SPRN_DEAR; /* Grab the DEAR */ \
473 stw r4, _DEAR(r11); \
474 EXC_XFER_LITE(0x0300, handle_page_fault)
475
476#define INSTRUCTION_STORAGE_EXCEPTION \
477 START_EXCEPTION(InstructionStorage) \
478 NORMAL_EXCEPTION_PROLOG(INST_STORAGE); \
479 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
480 stw r5,_ESR(r11); \
481 mr r4,r12; /* Pass SRR0 as arg2 */ \
482 stw r4, _DEAR(r11); \
483 li r5,0; /* Pass zero as arg3 */ \
484 EXC_XFER_LITE(0x0400, handle_page_fault)
485
486#define ALIGNMENT_EXCEPTION \
487 START_EXCEPTION(Alignment) \
488 NORMAL_EXCEPTION_PROLOG(ALIGNMENT); \
489 mfspr r4,SPRN_DEAR; /* Grab the DEAR and save it */ \
490 stw r4,_DEAR(r11); \
491 addi r3,r1,STACK_FRAME_OVERHEAD; \
492 EXC_XFER_STD(0x0600, alignment_exception)
493
494#define PROGRAM_EXCEPTION \
495 START_EXCEPTION(Program) \
496 NORMAL_EXCEPTION_PROLOG(PROGRAM); \
497 mfspr r4,SPRN_ESR; /* Grab the ESR and save it */ \
498 stw r4,_ESR(r11); \
499 addi r3,r1,STACK_FRAME_OVERHEAD; \
500 EXC_XFER_STD(0x0700, program_check_exception)
501
502#define DECREMENTER_EXCEPTION \
503 START_EXCEPTION(Decrementer) \
504 NORMAL_EXCEPTION_PROLOG(DECREMENTER); \
505 lis r0,TSR_DIS@h; /* Setup the DEC interrupt mask */ \
506 mtspr SPRN_TSR,r0; /* Clear the DEC interrupt */ \
507 addi r3,r1,STACK_FRAME_OVERHEAD; \
508 EXC_XFER_LITE(0x0900, timer_interrupt)
509
510#define FP_UNAVAILABLE_EXCEPTION \
511 START_EXCEPTION(FloatingPointUnavailable) \
512 NORMAL_EXCEPTION_PROLOG(FP_UNAVAIL); \
513 beq 1f; \
514 bl load_up_fpu; /* if from user, just load it up */ \
515 b fast_exception_return; \
5161: addi r3,r1,STACK_FRAME_OVERHEAD; \
517 EXC_XFER_STD(0x800, kernel_fp_unavailable_exception)
518
519#else /* __ASSEMBLY__ */
520struct exception_regs {
521 unsigned long mas0;
522 unsigned long mas1;
523 unsigned long mas2;
524 unsigned long mas3;
525 unsigned long mas6;
526 unsigned long mas7;
527 unsigned long srr0;
528 unsigned long srr1;
529 unsigned long csrr0;
530 unsigned long csrr1;
531 unsigned long dsrr0;
532 unsigned long dsrr1;
533 unsigned long saved_ksp_limit;
534};
535
536/* ensure this structure is always sized to a multiple of the stack alignment */
537#define STACK_EXC_LVL_FRAME_SIZE ALIGN(sizeof (struct exception_regs), 16)
538
539#endif /* __ASSEMBLY__ */
540#endif /* __HEAD_BOOKE_H__ */
1/* SPDX-License-Identifier: GPL-2.0 */
2#ifndef __HEAD_BOOKE_H__
3#define __HEAD_BOOKE_H__
4
5#include <asm/ptrace.h> /* for STACK_FRAME_REGS_MARKER */
6#include <asm/kvm_asm.h>
7#include <asm/kvm_booke_hv_asm.h>
8
9#ifdef __ASSEMBLY__
10
11/*
12 * Macros used for common Book-e exception handling
13 */
14
15#define SET_IVOR(vector_number, vector_label) \
16 li r26,vector_label@l; \
17 mtspr SPRN_IVOR##vector_number,r26; \
18 sync
19
20#if (THREAD_SHIFT < 15)
21#define ALLOC_STACK_FRAME(reg, val) \
22 addi reg,reg,val
23#else
24#define ALLOC_STACK_FRAME(reg, val) \
25 addis reg,reg,val@ha; \
26 addi reg,reg,val@l
27#endif
28
29/*
30 * Macro used to get to thread save registers.
31 * Note that entries 0-3 are used for the prolog code, and the remaining
32 * entries are available for specific exception use in the event a handler
33 * requires more than 4 scratch registers.
34 */
35#define THREAD_NORMSAVE(offset) (THREAD_NORMSAVES + (offset * 4))
36
37#ifdef CONFIG_PPC_FSL_BOOK3E
38#define BOOKE_CLEAR_BTB(reg) \
39START_BTB_FLUSH_SECTION \
40 BTB_FLUSH(reg) \
41END_BTB_FLUSH_SECTION
42#else
43#define BOOKE_CLEAR_BTB(reg)
44#endif
45
46
47#define NORMAL_EXCEPTION_PROLOG(intno) \
48 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \
49 mfspr r10, SPRN_SPRG_THREAD; \
50 stw r11, THREAD_NORMSAVE(0)(r10); \
51 stw r13, THREAD_NORMSAVE(2)(r10); \
52 mfcr r13; /* save CR in r13 for now */\
53 mfspr r11, SPRN_SRR1; \
54 DO_KVM BOOKE_INTERRUPT_##intno SPRN_SRR1; \
55 andi. r11, r11, MSR_PR; /* check whether user or kernel */\
56 mr r11, r1; \
57 beq 1f; \
58 BOOKE_CLEAR_BTB(r11) \
59 /* if from user, start at top of this thread's kernel stack */ \
60 lwz r11, TASK_STACK - THREAD(r10); \
61 ALLOC_STACK_FRAME(r11, THREAD_SIZE); \
621 : subi r11, r11, INT_FRAME_SIZE; /* Allocate exception frame */ \
63 stw r13, _CCR(r11); /* save various registers */ \
64 stw r12,GPR12(r11); \
65 stw r9,GPR9(r11); \
66 mfspr r13, SPRN_SPRG_RSCRATCH0; \
67 stw r13, GPR10(r11); \
68 lwz r12, THREAD_NORMSAVE(0)(r10); \
69 stw r12,GPR11(r11); \
70 lwz r13, THREAD_NORMSAVE(2)(r10); /* restore r13 */ \
71 mflr r10; \
72 stw r10,_LINK(r11); \
73 mfspr r12,SPRN_SRR0; \
74 stw r1, GPR1(r11); \
75 mfspr r9,SPRN_SRR1; \
76 stw r1, 0(r11); \
77 mr r1, r11; \
78 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
79 stw r0,GPR0(r11); \
80 lis r10, STACK_FRAME_REGS_MARKER@ha;/* exception frame marker */ \
81 addi r10, r10, STACK_FRAME_REGS_MARKER@l; \
82 stw r10, 8(r11); \
83 SAVE_4GPRS(3, r11); \
84 SAVE_2GPRS(7, r11)
85
86.macro SYSCALL_ENTRY trapno intno srr1
87 mfspr r10, SPRN_SPRG_THREAD
88#ifdef CONFIG_KVM_BOOKE_HV
89BEGIN_FTR_SECTION
90 mtspr SPRN_SPRG_WSCRATCH0, r10
91 stw r11, THREAD_NORMSAVE(0)(r10)
92 stw r13, THREAD_NORMSAVE(2)(r10)
93 mfcr r13 /* save CR in r13 for now */
94 mfspr r11, SPRN_SRR1
95 mtocrf 0x80, r11 /* check MSR[GS] without clobbering reg */
96 bf 3, 1975f
97 b kvmppc_handler_\intno\()_\srr1
981975:
99 mr r12, r13
100 lwz r13, THREAD_NORMSAVE(2)(r10)
101FTR_SECTION_ELSE
102#endif
103 mfcr r12
104#ifdef CONFIG_KVM_BOOKE_HV
105ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
106#endif
107 BOOKE_CLEAR_BTB(r11)
108 lwz r11, TASK_STACK - THREAD(r10)
109 rlwinm r12,r12,0,4,2 /* Clear SO bit in CR */
110 ALLOC_STACK_FRAME(r11, THREAD_SIZE - INT_FRAME_SIZE)
111 stw r12, _CCR(r11) /* save various registers */
112 mflr r12
113 stw r12,_LINK(r11)
114 mfspr r12,SPRN_SRR0
115 stw r1, GPR1(r11)
116 mfspr r9,SPRN_SRR1
117 stw r1, 0(r11)
118 mr r1, r11
119 stw r12,_NIP(r11)
120 rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */
121 lis r12, STACK_FRAME_REGS_MARKER@ha /* exception frame marker */
122 stw r2,GPR2(r11)
123 addi r12, r12, STACK_FRAME_REGS_MARKER@l
124 stw r9,_MSR(r11)
125 li r2, \trapno + 1
126 stw r12, 8(r11)
127 stw r2,_TRAP(r11)
128 SAVE_GPR(0, r11)
129 SAVE_4GPRS(3, r11)
130 SAVE_2GPRS(7, r11)
131
132 addi r11,r1,STACK_FRAME_OVERHEAD
133 addi r2,r10,-THREAD
134 stw r11,PT_REGS(r10)
135 /* Check to see if the dbcr0 register is set up to debug. Use the
136 internal debug mode bit to do this. */
137 lwz r12,THREAD_DBCR0(r10)
138 andis. r12,r12,DBCR0_IDM@h
139 ACCOUNT_CPU_USER_ENTRY(r2, r11, r12)
140 beq+ 3f
141 /* From user and task is ptraced - load up global dbcr0 */
142 li r12,-1 /* clear all pending debug events */
143 mtspr SPRN_DBSR,r12
144 lis r11,global_dbcr0@ha
145 tophys(r11,r11)
146 addi r11,r11,global_dbcr0@l
147#ifdef CONFIG_SMP
148 lwz r10, TASK_CPU(r2)
149 slwi r10, r10, 3
150 add r11, r11, r10
151#endif
152 lwz r12,0(r11)
153 mtspr SPRN_DBCR0,r12
154 lwz r12,4(r11)
155 addi r12,r12,-1
156 stw r12,4(r11)
157
1583:
159 tovirt(r2, r2) /* set r2 to current */
160 lis r11, transfer_to_syscall@h
161 ori r11, r11, transfer_to_syscall@l
162#ifdef CONFIG_TRACE_IRQFLAGS
163 /*
164 * If MSR is changing we need to keep interrupts disabled at this point
165 * otherwise we might risk taking an interrupt before we tell lockdep
166 * they are enabled.
167 */
168 lis r10, MSR_KERNEL@h
169 ori r10, r10, MSR_KERNEL@l
170 rlwimi r10, r9, 0, MSR_EE
171#else
172 lis r10, (MSR_KERNEL | MSR_EE)@h
173 ori r10, r10, (MSR_KERNEL | MSR_EE)@l
174#endif
175 mtspr SPRN_SRR1,r10
176 mtspr SPRN_SRR0,r11
177 SYNC
178 RFI /* jump to handler, enable MMU */
179.endm
180
181/* To handle the additional exception priority levels on 40x and Book-E
182 * processors we allocate a stack per additional priority level.
183 *
184 * On 40x critical is the only additional level
185 * On 44x/e500 we have critical and machine check
186 * On e200 we have critical and debug (machine check occurs via critical)
187 *
188 * Additionally we reserve a SPRG for each priority level so we can free up a
189 * GPR to use as the base for indirect access to the exception stacks. This
190 * is necessary since the MMU is always on, for Book-E parts, and the stacks
191 * are offset from KERNELBASE.
192 *
193 * There is some space optimization to be had here if desired. However
194 * to allow for a common kernel with support for debug exceptions either
195 * going to critical or their own debug level we aren't currently
196 * providing configurations that micro-optimize space usage.
197 */
198
199#define MC_STACK_BASE mcheckirq_ctx
200#define CRIT_STACK_BASE critirq_ctx
201
202/* only on e500mc/e200 */
203#define DBG_STACK_BASE dbgirq_ctx
204
205#define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
206
207#ifdef CONFIG_SMP
208#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
209 mfspr r8,SPRN_PIR; \
210 slwi r8,r8,2; \
211 addis r8,r8,level##_STACK_BASE@ha; \
212 lwz r8,level##_STACK_BASE@l(r8); \
213 addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
214#else
215#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
216 lis r8,level##_STACK_BASE@ha; \
217 lwz r8,level##_STACK_BASE@l(r8); \
218 addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
219#endif
220
221/*
222 * Exception prolog for critical/machine check exceptions. This is a
223 * little different from the normal exception prolog above since a
224 * critical/machine check exception can potentially occur at any point
225 * during normal exception processing. Thus we cannot use the same SPRG
226 * registers as the normal prolog above. Instead we use a portion of the
227 * critical/machine check exception stack at low physical addresses.
228 */
229#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, intno, exc_level_srr0, exc_level_srr1) \
230 mtspr SPRN_SPRG_WSCRATCH_##exc_level,r8; \
231 BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
232 stw r9,GPR9(r8); /* save various registers */\
233 mfcr r9; /* save CR in r9 for now */\
234 stw r10,GPR10(r8); \
235 stw r11,GPR11(r8); \
236 stw r9,_CCR(r8); /* save CR on stack */\
237 mfspr r11,exc_level_srr1; /* check whether user or kernel */\
238 DO_KVM BOOKE_INTERRUPT_##intno exc_level_srr1; \
239 BOOKE_CLEAR_BTB(r10) \
240 andi. r11,r11,MSR_PR; \
241 mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
242 lwz r11, TASK_STACK - THREAD(r11); /* this thread's kernel stack */\
243 addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\
244 beq 1f; \
245 /* COMING FROM USER MODE */ \
246 stw r9,_CCR(r11); /* save CR */\
247 lwz r10,GPR10(r8); /* copy regs from exception stack */\
248 lwz r9,GPR9(r8); \
249 stw r10,GPR10(r11); \
250 lwz r10,GPR11(r8); \
251 stw r9,GPR9(r11); \
252 stw r10,GPR11(r11); \
253 b 2f; \
254 /* COMING FROM PRIV MODE */ \
2551: mr r11, r8; \
2562: mfspr r8,SPRN_SPRG_RSCRATCH_##exc_level; \
257 stw r12,GPR12(r11); /* save various registers */\
258 mflr r10; \
259 stw r10,_LINK(r11); \
260 mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
261 stw r12,_DEAR(r11); /* since they may have had stuff */\
262 mfspr r9,SPRN_ESR; /* in them at the point where the */\
263 stw r9,_ESR(r11); /* exception was taken */\
264 mfspr r12,exc_level_srr0; \
265 stw r1,GPR1(r11); \
266 mfspr r9,exc_level_srr1; \
267 stw r1,0(r11); \
268 mr r1,r11; \
269 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
270 stw r0,GPR0(r11); \
271 SAVE_4GPRS(3, r11); \
272 SAVE_2GPRS(7, r11)
273
274#define CRITICAL_EXCEPTION_PROLOG(intno) \
275 EXC_LEVEL_EXCEPTION_PROLOG(CRIT, intno, SPRN_CSRR0, SPRN_CSRR1)
276#define DEBUG_EXCEPTION_PROLOG \
277 EXC_LEVEL_EXCEPTION_PROLOG(DBG, DEBUG, SPRN_DSRR0, SPRN_DSRR1)
278#define MCHECK_EXCEPTION_PROLOG \
279 EXC_LEVEL_EXCEPTION_PROLOG(MC, MACHINE_CHECK, \
280 SPRN_MCSRR0, SPRN_MCSRR1)
281
282/*
283 * Guest Doorbell -- this is a bit odd in that uses GSRR0/1 despite
284 * being delivered to the host. This exception can only happen
285 * inside a KVM guest -- so we just handle up to the DO_KVM rather
286 * than try to fit this into one of the existing prolog macros.
287 */
288#define GUEST_DOORBELL_EXCEPTION \
289 START_EXCEPTION(GuestDoorbell); \
290 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \
291 mfspr r10, SPRN_SPRG_THREAD; \
292 stw r11, THREAD_NORMSAVE(0)(r10); \
293 mfspr r11, SPRN_SRR1; \
294 stw r13, THREAD_NORMSAVE(2)(r10); \
295 mfcr r13; /* save CR in r13 for now */\
296 DO_KVM BOOKE_INTERRUPT_GUEST_DBELL SPRN_GSRR1; \
297 trap
298
299/*
300 * Exception vectors.
301 */
302#define START_EXCEPTION(label) \
303 .align 5; \
304label:
305
306#define EXCEPTION(n, intno, label, hdlr, xfer) \
307 START_EXCEPTION(label); \
308 NORMAL_EXCEPTION_PROLOG(intno); \
309 addi r3,r1,STACK_FRAME_OVERHEAD; \
310 xfer(n, hdlr)
311
312#define CRITICAL_EXCEPTION(n, intno, label, hdlr) \
313 START_EXCEPTION(label); \
314 CRITICAL_EXCEPTION_PROLOG(intno); \
315 addi r3,r1,STACK_FRAME_OVERHEAD; \
316 EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
317 crit_transfer_to_handler, ret_from_crit_exc)
318
319#define MCHECK_EXCEPTION(n, label, hdlr) \
320 START_EXCEPTION(label); \
321 MCHECK_EXCEPTION_PROLOG; \
322 mfspr r5,SPRN_ESR; \
323 stw r5,_ESR(r11); \
324 addi r3,r1,STACK_FRAME_OVERHEAD; \
325 EXC_XFER_TEMPLATE(hdlr, n+4, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
326 mcheck_transfer_to_handler, ret_from_mcheck_exc)
327
328#define EXC_XFER_TEMPLATE(hdlr, trap, msr, tfer, ret) \
329 li r10,trap; \
330 stw r10,_TRAP(r11); \
331 lis r10,msr@h; \
332 ori r10,r10,msr@l; \
333 bl tfer; \
334 .long hdlr; \
335 .long ret
336
337#define EXC_XFER_STD(n, hdlr) \
338 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, transfer_to_handler_full, \
339 ret_from_except_full)
340
341#define EXC_XFER_LITE(n, hdlr) \
342 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, transfer_to_handler, \
343 ret_from_except)
344
345/* Check for a single step debug exception while in an exception
346 * handler before state has been saved. This is to catch the case
347 * where an instruction that we are trying to single step causes
348 * an exception (eg ITLB/DTLB miss) and thus the first instruction of
349 * the exception handler generates a single step debug exception.
350 *
351 * If we get a debug trap on the first instruction of an exception handler,
352 * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
353 * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
354 * The exception handler was handling a non-critical interrupt, so it will
355 * save (and later restore) the MSR via SPRN_CSRR1, which will still have
356 * the MSR_DE bit set.
357 */
358#define DEBUG_DEBUG_EXCEPTION \
359 START_EXCEPTION(DebugDebug); \
360 DEBUG_EXCEPTION_PROLOG; \
361 \
362 /* \
363 * If there is a single step or branch-taken exception in an \
364 * exception entry sequence, it was probably meant to apply to \
365 * the code where the exception occurred (since exception entry \
366 * doesn't turn off DE automatically). We simulate the effect \
367 * of turning off DE on entry to an exception handler by turning \
368 * off DE in the DSRR1 value and clearing the debug status. \
369 */ \
370 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
371 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
372 beq+ 2f; \
373 \
374 lis r10,interrupt_base@h; /* check if exception in vectors */ \
375 ori r10,r10,interrupt_base@l; \
376 cmplw r12,r10; \
377 blt+ 2f; /* addr below exception vectors */ \
378 \
379 lis r10,interrupt_end@h; \
380 ori r10,r10,interrupt_end@l; \
381 cmplw r12,r10; \
382 bgt+ 2f; /* addr above exception vectors */ \
383 \
384 /* here it looks like we got an inappropriate debug exception. */ \
3851: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \
386 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
387 mtspr SPRN_DBSR,r10; \
388 /* restore state and get out */ \
389 lwz r10,_CCR(r11); \
390 lwz r0,GPR0(r11); \
391 lwz r1,GPR1(r11); \
392 mtcrf 0x80,r10; \
393 mtspr SPRN_DSRR0,r12; \
394 mtspr SPRN_DSRR1,r9; \
395 lwz r9,GPR9(r11); \
396 lwz r12,GPR12(r11); \
397 mtspr SPRN_SPRG_WSCRATCH_DBG,r8; \
398 BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \
399 lwz r10,GPR10(r8); \
400 lwz r11,GPR11(r8); \
401 mfspr r8,SPRN_SPRG_RSCRATCH_DBG; \
402 \
403 PPC_RFDI; \
404 b .; \
405 \
406 /* continue normal handling for a debug exception... */ \
4072: mfspr r4,SPRN_DBSR; \
408 addi r3,r1,STACK_FRAME_OVERHEAD; \
409 EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), debug_transfer_to_handler, ret_from_debug_exc)
410
411#define DEBUG_CRIT_EXCEPTION \
412 START_EXCEPTION(DebugCrit); \
413 CRITICAL_EXCEPTION_PROLOG(DEBUG); \
414 \
415 /* \
416 * If there is a single step or branch-taken exception in an \
417 * exception entry sequence, it was probably meant to apply to \
418 * the code where the exception occurred (since exception entry \
419 * doesn't turn off DE automatically). We simulate the effect \
420 * of turning off DE on entry to an exception handler by turning \
421 * off DE in the CSRR1 value and clearing the debug status. \
422 */ \
423 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
424 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
425 beq+ 2f; \
426 \
427 lis r10,interrupt_base@h; /* check if exception in vectors */ \
428 ori r10,r10,interrupt_base@l; \
429 cmplw r12,r10; \
430 blt+ 2f; /* addr below exception vectors */ \
431 \
432 lis r10,interrupt_end@h; \
433 ori r10,r10,interrupt_end@l; \
434 cmplw r12,r10; \
435 bgt+ 2f; /* addr above exception vectors */ \
436 \
437 /* here it looks like we got an inappropriate debug exception. */ \
4381: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CSRR1 value */ \
439 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
440 mtspr SPRN_DBSR,r10; \
441 /* restore state and get out */ \
442 lwz r10,_CCR(r11); \
443 lwz r0,GPR0(r11); \
444 lwz r1,GPR1(r11); \
445 mtcrf 0x80,r10; \
446 mtspr SPRN_CSRR0,r12; \
447 mtspr SPRN_CSRR1,r9; \
448 lwz r9,GPR9(r11); \
449 lwz r12,GPR12(r11); \
450 mtspr SPRN_SPRG_WSCRATCH_CRIT,r8; \
451 BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \
452 lwz r10,GPR10(r8); \
453 lwz r11,GPR11(r8); \
454 mfspr r8,SPRN_SPRG_RSCRATCH_CRIT; \
455 \
456 rfci; \
457 b .; \
458 \
459 /* continue normal handling for a critical exception... */ \
4602: mfspr r4,SPRN_DBSR; \
461 addi r3,r1,STACK_FRAME_OVERHEAD; \
462 EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), crit_transfer_to_handler, ret_from_crit_exc)
463
464#define DATA_STORAGE_EXCEPTION \
465 START_EXCEPTION(DataStorage) \
466 NORMAL_EXCEPTION_PROLOG(DATA_STORAGE); \
467 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
468 stw r5,_ESR(r11); \
469 mfspr r4,SPRN_DEAR; /* Grab the DEAR */ \
470 EXC_XFER_LITE(0x0300, handle_page_fault)
471
472#define INSTRUCTION_STORAGE_EXCEPTION \
473 START_EXCEPTION(InstructionStorage) \
474 NORMAL_EXCEPTION_PROLOG(INST_STORAGE); \
475 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
476 stw r5,_ESR(r11); \
477 mr r4,r12; /* Pass SRR0 as arg2 */ \
478 li r5,0; /* Pass zero as arg3 */ \
479 EXC_XFER_LITE(0x0400, handle_page_fault)
480
481#define ALIGNMENT_EXCEPTION \
482 START_EXCEPTION(Alignment) \
483 NORMAL_EXCEPTION_PROLOG(ALIGNMENT); \
484 mfspr r4,SPRN_DEAR; /* Grab the DEAR and save it */ \
485 stw r4,_DEAR(r11); \
486 addi r3,r1,STACK_FRAME_OVERHEAD; \
487 EXC_XFER_STD(0x0600, alignment_exception)
488
489#define PROGRAM_EXCEPTION \
490 START_EXCEPTION(Program) \
491 NORMAL_EXCEPTION_PROLOG(PROGRAM); \
492 mfspr r4,SPRN_ESR; /* Grab the ESR and save it */ \
493 stw r4,_ESR(r11); \
494 addi r3,r1,STACK_FRAME_OVERHEAD; \
495 EXC_XFER_STD(0x0700, program_check_exception)
496
497#define DECREMENTER_EXCEPTION \
498 START_EXCEPTION(Decrementer) \
499 NORMAL_EXCEPTION_PROLOG(DECREMENTER); \
500 lis r0,TSR_DIS@h; /* Setup the DEC interrupt mask */ \
501 mtspr SPRN_TSR,r0; /* Clear the DEC interrupt */ \
502 addi r3,r1,STACK_FRAME_OVERHEAD; \
503 EXC_XFER_LITE(0x0900, timer_interrupt)
504
505#define FP_UNAVAILABLE_EXCEPTION \
506 START_EXCEPTION(FloatingPointUnavailable) \
507 NORMAL_EXCEPTION_PROLOG(FP_UNAVAIL); \
508 beq 1f; \
509 bl load_up_fpu; /* if from user, just load it up */ \
510 b fast_exception_return; \
5111: addi r3,r1,STACK_FRAME_OVERHEAD; \
512 EXC_XFER_STD(0x800, kernel_fp_unavailable_exception)
513
514#else /* __ASSEMBLY__ */
515struct exception_regs {
516 unsigned long mas0;
517 unsigned long mas1;
518 unsigned long mas2;
519 unsigned long mas3;
520 unsigned long mas6;
521 unsigned long mas7;
522 unsigned long srr0;
523 unsigned long srr1;
524 unsigned long csrr0;
525 unsigned long csrr1;
526 unsigned long dsrr0;
527 unsigned long dsrr1;
528 unsigned long saved_ksp_limit;
529};
530
531/* ensure this structure is always sized to a multiple of the stack alignment */
532#define STACK_EXC_LVL_FRAME_SIZE _ALIGN_UP(sizeof (struct exception_regs), 16)
533
534#endif /* __ASSEMBLY__ */
535#endif /* __HEAD_BOOKE_H__ */