Loading...
1// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
2/******************************************************************************
3 *
4 * Module Name: hwvalid - I/O request validation
5 *
6 * Copyright (C) 2000 - 2020, Intel Corp.
7 *
8 *****************************************************************************/
9
10#include <acpi/acpi.h>
11#include "accommon.h"
12
13#define _COMPONENT ACPI_HARDWARE
14ACPI_MODULE_NAME("hwvalid")
15
16/* Local prototypes */
17static acpi_status
18acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width);
19
20/*
21 * Protected I/O ports. Some ports are always illegal, and some are
22 * conditionally illegal. This table must remain ordered by port address.
23 *
24 * The table is used to implement the Microsoft port access rules that
25 * first appeared in Windows XP. Some ports are always illegal, and some
26 * ports are only illegal if the BIOS calls _OSI with a win_XP string or
27 * later (meaning that the BIOS itelf is post-XP.)
28 *
29 * This provides ACPICA with the desired port protections and
30 * Microsoft compatibility.
31 *
32 * Description of port entries:
33 * DMA: DMA controller
34 * PIC0: Programmable Interrupt Controller (8259A)
35 * PIT1: System Timer 1
36 * PIT2: System Timer 2 failsafe
37 * RTC: Real-time clock
38 * CMOS: Extended CMOS
39 * DMA1: DMA 1 page registers
40 * DMA1L: DMA 1 Ch 0 low page
41 * DMA2: DMA 2 page registers
42 * DMA2L: DMA 2 low page refresh
43 * ARBC: Arbitration control
44 * SETUP: Reserved system board setup
45 * POS: POS channel select
46 * PIC1: Cascaded PIC
47 * IDMA: ISA DMA
48 * ELCR: PIC edge/level registers
49 * PCI: PCI configuration space
50 */
51static const struct acpi_port_info acpi_protected_ports[] = {
52 {"DMA", 0x0000, 0x000F, ACPI_OSI_WIN_XP},
53 {"PIC0", 0x0020, 0x0021, ACPI_ALWAYS_ILLEGAL},
54 {"PIT1", 0x0040, 0x0043, ACPI_OSI_WIN_XP},
55 {"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP},
56 {"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP},
57 {"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP},
58 {"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP},
59 {"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP},
60 {"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP},
61 {"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP},
62 {"ARBC", 0x0090, 0x0091, ACPI_OSI_WIN_XP},
63 {"SETUP", 0x0093, 0x0094, ACPI_OSI_WIN_XP},
64 {"POS", 0x0096, 0x0097, ACPI_OSI_WIN_XP},
65 {"PIC1", 0x00A0, 0x00A1, ACPI_ALWAYS_ILLEGAL},
66 {"IDMA", 0x00C0, 0x00DF, ACPI_OSI_WIN_XP},
67 {"ELCR", 0x04D0, 0x04D1, ACPI_ALWAYS_ILLEGAL},
68 {"PCI", 0x0CF8, 0x0CFF, ACPI_OSI_WIN_XP}
69};
70
71#define ACPI_PORT_INFO_ENTRIES ACPI_ARRAY_LENGTH (acpi_protected_ports)
72
73/******************************************************************************
74 *
75 * FUNCTION: acpi_hw_validate_io_request
76 *
77 * PARAMETERS: Address Address of I/O port/register
78 * bit_width Number of bits (8,16,32)
79 *
80 * RETURN: Status
81 *
82 * DESCRIPTION: Validates an I/O request (address/length). Certain ports are
83 * always illegal and some ports are only illegal depending on
84 * the requests the BIOS AML code makes to the predefined
85 * _OSI method.
86 *
87 ******************************************************************************/
88
89static acpi_status
90acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width)
91{
92 u32 i;
93 u32 byte_width;
94 acpi_io_address last_address;
95 const struct acpi_port_info *port_info;
96
97 ACPI_FUNCTION_TRACE(hw_validate_io_request);
98
99 /* Supported widths are 8/16/32 */
100
101 if ((bit_width != 8) && (bit_width != 16) && (bit_width != 32)) {
102 ACPI_ERROR((AE_INFO,
103 "Bad BitWidth parameter: %8.8X", bit_width));
104 return_ACPI_STATUS(AE_BAD_PARAMETER);
105 }
106
107 port_info = acpi_protected_ports;
108 byte_width = ACPI_DIV_8(bit_width);
109 last_address = address + byte_width - 1;
110
111 ACPI_DEBUG_PRINT((ACPI_DB_IO,
112 "Address %8.8X%8.8X LastAddress %8.8X%8.8X Length %X",
113 ACPI_FORMAT_UINT64(address),
114 ACPI_FORMAT_UINT64(last_address), byte_width));
115
116 /* Maximum 16-bit address in I/O space */
117
118 if (last_address > ACPI_UINT16_MAX) {
119 ACPI_ERROR((AE_INFO,
120 "Illegal I/O port address/length above 64K: %8.8X%8.8X/0x%X",
121 ACPI_FORMAT_UINT64(address), byte_width));
122 return_ACPI_STATUS(AE_LIMIT);
123 }
124
125 /* Exit if requested address is not within the protected port table */
126
127 if (address > acpi_protected_ports[ACPI_PORT_INFO_ENTRIES - 1].end) {
128 return_ACPI_STATUS(AE_OK);
129 }
130
131 /* Check request against the list of protected I/O ports */
132
133 for (i = 0; i < ACPI_PORT_INFO_ENTRIES; i++, port_info++) {
134 /*
135 * Check if the requested address range will write to a reserved
136 * port. There are four cases to consider:
137 *
138 * 1) Address range is contained completely in the port address range
139 * 2) Address range overlaps port range at the port range start
140 * 3) Address range overlaps port range at the port range end
141 * 4) Address range completely encompasses the port range
142 */
143 if ((address <= port_info->end)
144 && (last_address >= port_info->start)) {
145
146 /* Port illegality may depend on the _OSI calls made by the BIOS */
147
148 if (acpi_gbl_osi_data >= port_info->osi_dependency) {
149 ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
150 "Denied AML access to port 0x%8.8X%8.8X/%X (%s 0x%.4X-0x%.4X)\n",
151 ACPI_FORMAT_UINT64(address),
152 byte_width, port_info->name,
153 port_info->start,
154 port_info->end));
155
156 return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
157 }
158 }
159
160 /* Finished if address range ends before the end of this port */
161
162 if (last_address <= port_info->end) {
163 break;
164 }
165 }
166
167 return_ACPI_STATUS(AE_OK);
168}
169
170/******************************************************************************
171 *
172 * FUNCTION: acpi_hw_read_port
173 *
174 * PARAMETERS: Address Address of I/O port/register to read
175 * Value Where value (data) is returned
176 * Width Number of bits
177 *
178 * RETURN: Status and value read from port
179 *
180 * DESCRIPTION: Read data from an I/O port or register. This is a front-end
181 * to acpi_os_read_port that performs validation on both the port
182 * address and the length.
183 *
184 *****************************************************************************/
185
186acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
187{
188 acpi_status status;
189 u32 one_byte;
190 u32 i;
191
192 /* Truncate address to 16 bits if requested */
193
194 if (acpi_gbl_truncate_io_addresses) {
195 address &= ACPI_UINT16_MAX;
196 }
197
198 /* Validate the entire request and perform the I/O */
199
200 status = acpi_hw_validate_io_request(address, width);
201 if (ACPI_SUCCESS(status)) {
202 status = acpi_os_read_port(address, value, width);
203 return (status);
204 }
205
206 if (status != AE_AML_ILLEGAL_ADDRESS) {
207 return (status);
208 }
209
210 /*
211 * There has been a protection violation within the request. Fall
212 * back to byte granularity port I/O and ignore the failing bytes.
213 * This provides compatibility with other ACPI implementations.
214 */
215 for (i = 0, *value = 0; i < width; i += 8) {
216
217 /* Validate and read one byte */
218
219 if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
220 status = acpi_os_read_port(address, &one_byte, 8);
221 if (ACPI_FAILURE(status)) {
222 return (status);
223 }
224
225 *value |= (one_byte << i);
226 }
227
228 address++;
229 }
230
231 return (AE_OK);
232}
233
234/******************************************************************************
235 *
236 * FUNCTION: acpi_hw_write_port
237 *
238 * PARAMETERS: Address Address of I/O port/register to write
239 * Value Value to write
240 * Width Number of bits
241 *
242 * RETURN: Status
243 *
244 * DESCRIPTION: Write data to an I/O port or register. This is a front-end
245 * to acpi_os_write_port that performs validation on both the port
246 * address and the length.
247 *
248 *****************************************************************************/
249
250acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width)
251{
252 acpi_status status;
253 u32 i;
254
255 /* Truncate address to 16 bits if requested */
256
257 if (acpi_gbl_truncate_io_addresses) {
258 address &= ACPI_UINT16_MAX;
259 }
260
261 /* Validate the entire request and perform the I/O */
262
263 status = acpi_hw_validate_io_request(address, width);
264 if (ACPI_SUCCESS(status)) {
265 status = acpi_os_write_port(address, value, width);
266 return (status);
267 }
268
269 if (status != AE_AML_ILLEGAL_ADDRESS) {
270 return (status);
271 }
272
273 /*
274 * There has been a protection violation within the request. Fall
275 * back to byte granularity port I/O and ignore the failing bytes.
276 * This provides compatibility with other ACPI implementations.
277 */
278 for (i = 0; i < width; i += 8) {
279
280 /* Validate and write one byte */
281
282 if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
283 status =
284 acpi_os_write_port(address, (value >> i) & 0xFF, 8);
285 if (ACPI_FAILURE(status)) {
286 return (status);
287 }
288 }
289
290 address++;
291 }
292
293 return (AE_OK);
294}
1// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
2/******************************************************************************
3 *
4 * Module Name: hwvalid - I/O request validation
5 *
6 * Copyright (C) 2000 - 2021, Intel Corp.
7 *
8 *****************************************************************************/
9
10#include <acpi/acpi.h>
11#include "accommon.h"
12
13#define _COMPONENT ACPI_HARDWARE
14ACPI_MODULE_NAME("hwvalid")
15
16/* Local prototypes */
17static acpi_status
18acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width);
19
20/*
21 * Protected I/O ports. Some ports are always illegal, and some are
22 * conditionally illegal. This table must remain ordered by port address.
23 *
24 * The table is used to implement the Microsoft port access rules that
25 * first appeared in Windows XP. Some ports are always illegal, and some
26 * ports are only illegal if the BIOS calls _OSI with a win_XP string or
27 * later (meaning that the BIOS itelf is post-XP.)
28 *
29 * This provides ACPICA with the desired port protections and
30 * Microsoft compatibility.
31 *
32 * Description of port entries:
33 * DMA: DMA controller
34 * PIC0: Programmable Interrupt Controller (8259A)
35 * PIT1: System Timer 1
36 * PIT2: System Timer 2 failsafe
37 * RTC: Real-time clock
38 * CMOS: Extended CMOS
39 * DMA1: DMA 1 page registers
40 * DMA1L: DMA 1 Ch 0 low page
41 * DMA2: DMA 2 page registers
42 * DMA2L: DMA 2 low page refresh
43 * ARBC: Arbitration control
44 * SETUP: Reserved system board setup
45 * POS: POS channel select
46 * PIC1: Cascaded PIC
47 * IDMA: ISA DMA
48 * ELCR: PIC edge/level registers
49 * PCI: PCI configuration space
50 */
51static const struct acpi_port_info acpi_protected_ports[] = {
52 {"DMA", 0x0000, 0x000F, ACPI_OSI_WIN_XP},
53 {"PIC0", 0x0020, 0x0021, ACPI_ALWAYS_ILLEGAL},
54 {"PIT1", 0x0040, 0x0043, ACPI_OSI_WIN_XP},
55 {"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP},
56 {"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP},
57 {"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP},
58 {"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP},
59 {"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP},
60 {"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP},
61 {"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP},
62 {"ARBC", 0x0090, 0x0091, ACPI_OSI_WIN_XP},
63 {"SETUP", 0x0093, 0x0094, ACPI_OSI_WIN_XP},
64 {"POS", 0x0096, 0x0097, ACPI_OSI_WIN_XP},
65 {"PIC1", 0x00A0, 0x00A1, ACPI_ALWAYS_ILLEGAL},
66 {"IDMA", 0x00C0, 0x00DF, ACPI_OSI_WIN_XP},
67 {"ELCR", 0x04D0, 0x04D1, ACPI_ALWAYS_ILLEGAL},
68 {"PCI", 0x0CF8, 0x0CFF, ACPI_OSI_WIN_XP}
69};
70
71#define ACPI_PORT_INFO_ENTRIES ACPI_ARRAY_LENGTH (acpi_protected_ports)
72
73/******************************************************************************
74 *
75 * FUNCTION: acpi_hw_validate_io_request
76 *
77 * PARAMETERS: Address Address of I/O port/register
78 * bit_width Number of bits (8,16,32)
79 *
80 * RETURN: Status
81 *
82 * DESCRIPTION: Validates an I/O request (address/length). Certain ports are
83 * always illegal and some ports are only illegal depending on
84 * the requests the BIOS AML code makes to the predefined
85 * _OSI method.
86 *
87 ******************************************************************************/
88
89static acpi_status
90acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width)
91{
92 u32 i;
93 u32 byte_width;
94 acpi_io_address last_address;
95 const struct acpi_port_info *port_info;
96
97 ACPI_FUNCTION_TRACE(hw_validate_io_request);
98
99 /* Supported widths are 8/16/32 */
100
101 if ((bit_width != 8) && (bit_width != 16) && (bit_width != 32)) {
102 ACPI_ERROR((AE_INFO,
103 "Bad BitWidth parameter: %8.8X", bit_width));
104 return_ACPI_STATUS(AE_BAD_PARAMETER);
105 }
106
107 port_info = acpi_protected_ports;
108 byte_width = ACPI_DIV_8(bit_width);
109 last_address = address + byte_width - 1;
110
111 ACPI_DEBUG_PRINT((ACPI_DB_IO,
112 "Address %8.8X%8.8X LastAddress %8.8X%8.8X Length %X",
113 ACPI_FORMAT_UINT64(address),
114 ACPI_FORMAT_UINT64(last_address), byte_width));
115
116 /* Maximum 16-bit address in I/O space */
117
118 if (last_address > ACPI_UINT16_MAX) {
119 ACPI_ERROR((AE_INFO,
120 "Illegal I/O port address/length above 64K: %8.8X%8.8X/0x%X",
121 ACPI_FORMAT_UINT64(address), byte_width));
122 return_ACPI_STATUS(AE_LIMIT);
123 }
124
125 /* Exit if requested address is not within the protected port table */
126
127 if (address > acpi_protected_ports[ACPI_PORT_INFO_ENTRIES - 1].end) {
128 return_ACPI_STATUS(AE_OK);
129 }
130
131 /* Check request against the list of protected I/O ports */
132
133 for (i = 0; i < ACPI_PORT_INFO_ENTRIES; i++, port_info++) {
134 /*
135 * Check if the requested address range will write to a reserved
136 * port. There are four cases to consider:
137 *
138 * 1) Address range is contained completely in the port address range
139 * 2) Address range overlaps port range at the port range start
140 * 3) Address range overlaps port range at the port range end
141 * 4) Address range completely encompasses the port range
142 */
143 if ((address <= port_info->end)
144 && (last_address >= port_info->start)) {
145
146 /* Port illegality may depend on the _OSI calls made by the BIOS */
147
148 if (acpi_gbl_osi_data >= port_info->osi_dependency) {
149 ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
150 "Denied AML access to port 0x%8.8X%8.8X/%X (%s 0x%.4X-0x%.4X)\n",
151 ACPI_FORMAT_UINT64(address),
152 byte_width, port_info->name,
153 port_info->start,
154 port_info->end));
155
156 return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
157 }
158 }
159
160 /* Finished if address range ends before the end of this port */
161
162 if (last_address <= port_info->end) {
163 break;
164 }
165 }
166
167 return_ACPI_STATUS(AE_OK);
168}
169
170/******************************************************************************
171 *
172 * FUNCTION: acpi_hw_read_port
173 *
174 * PARAMETERS: Address Address of I/O port/register to read
175 * Value Where value (data) is returned
176 * Width Number of bits
177 *
178 * RETURN: Status and value read from port
179 *
180 * DESCRIPTION: Read data from an I/O port or register. This is a front-end
181 * to acpi_os_read_port that performs validation on both the port
182 * address and the length.
183 *
184 *****************************************************************************/
185
186acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
187{
188 acpi_status status;
189 u32 one_byte;
190 u32 i;
191
192 /* Truncate address to 16 bits if requested */
193
194 if (acpi_gbl_truncate_io_addresses) {
195 address &= ACPI_UINT16_MAX;
196 }
197
198 /* Validate the entire request and perform the I/O */
199
200 status = acpi_hw_validate_io_request(address, width);
201 if (ACPI_SUCCESS(status)) {
202 status = acpi_os_read_port(address, value, width);
203 return (status);
204 }
205
206 if (status != AE_AML_ILLEGAL_ADDRESS) {
207 return (status);
208 }
209
210 /*
211 * There has been a protection violation within the request. Fall
212 * back to byte granularity port I/O and ignore the failing bytes.
213 * This provides compatibility with other ACPI implementations.
214 */
215 for (i = 0, *value = 0; i < width; i += 8) {
216
217 /* Validate and read one byte */
218
219 if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
220 status = acpi_os_read_port(address, &one_byte, 8);
221 if (ACPI_FAILURE(status)) {
222 return (status);
223 }
224
225 *value |= (one_byte << i);
226 }
227
228 address++;
229 }
230
231 return (AE_OK);
232}
233
234/******************************************************************************
235 *
236 * FUNCTION: acpi_hw_write_port
237 *
238 * PARAMETERS: Address Address of I/O port/register to write
239 * Value Value to write
240 * Width Number of bits
241 *
242 * RETURN: Status
243 *
244 * DESCRIPTION: Write data to an I/O port or register. This is a front-end
245 * to acpi_os_write_port that performs validation on both the port
246 * address and the length.
247 *
248 *****************************************************************************/
249
250acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width)
251{
252 acpi_status status;
253 u32 i;
254
255 /* Truncate address to 16 bits if requested */
256
257 if (acpi_gbl_truncate_io_addresses) {
258 address &= ACPI_UINT16_MAX;
259 }
260
261 /* Validate the entire request and perform the I/O */
262
263 status = acpi_hw_validate_io_request(address, width);
264 if (ACPI_SUCCESS(status)) {
265 status = acpi_os_write_port(address, value, width);
266 return (status);
267 }
268
269 if (status != AE_AML_ILLEGAL_ADDRESS) {
270 return (status);
271 }
272
273 /*
274 * There has been a protection violation within the request. Fall
275 * back to byte granularity port I/O and ignore the failing bytes.
276 * This provides compatibility with other ACPI implementations.
277 */
278 for (i = 0; i < width; i += 8) {
279
280 /* Validate and write one byte */
281
282 if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
283 status =
284 acpi_os_write_port(address, (value >> i) & 0xFF, 8);
285 if (ACPI_FAILURE(status)) {
286 return (status);
287 }
288 }
289
290 address++;
291 }
292
293 return (AE_OK);
294}
295
296/******************************************************************************
297 *
298 * FUNCTION: acpi_hw_validate_io_block
299 *
300 * PARAMETERS: Address Address of I/O port/register blobk
301 * bit_width Number of bits (8,16,32) in each register
302 * count Number of registers in the block
303 *
304 * RETURN: Status
305 *
306 * DESCRIPTION: Validates a block of I/O ports/registers.
307 *
308 ******************************************************************************/
309
310acpi_status acpi_hw_validate_io_block(u64 address, u32 bit_width, u32 count)
311{
312 acpi_status status;
313
314 while (count--) {
315 status = acpi_hw_validate_io_request((acpi_io_address)address,
316 bit_width);
317 if (ACPI_FAILURE(status))
318 return_ACPI_STATUS(status);
319
320 address += ACPI_DIV_8(bit_width);
321 }
322
323 return_ACPI_STATUS(AE_OK);
324}