Linux Audio

Check our new training course

Loading...
v5.9
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * arizona-spi.c  --  Arizona SPI bus interface
  4 *
  5 * Copyright 2012 Wolfson Microelectronics plc
  6 *
  7 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
  8 */
  9
 
 10#include <linux/err.h>
 
 
 11#include <linux/module.h>
 12#include <linux/pm_runtime.h>
 13#include <linux/regmap.h>
 14#include <linux/regulator/consumer.h>
 15#include <linux/slab.h>
 16#include <linux/spi/spi.h>
 17#include <linux/of.h>
 
 18
 19#include <linux/mfd/arizona/core.h>
 20
 21#include "arizona.h"
 22
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 23static int arizona_spi_probe(struct spi_device *spi)
 24{
 25	const struct spi_device_id *id = spi_get_device_id(spi);
 
 26	struct arizona *arizona;
 27	const struct regmap_config *regmap_config = NULL;
 28	unsigned long type;
 29	int ret;
 30
 31	if (spi->dev.of_node)
 32		type = arizona_of_get_type(&spi->dev);
 33	else
 
 34		type = id->driver_data;
 35
 36	switch (type) {
 37	case WM5102:
 38		if (IS_ENABLED(CONFIG_MFD_WM5102))
 39			regmap_config = &wm5102_spi_regmap;
 40		break;
 41	case WM5110:
 42	case WM8280:
 43		if (IS_ENABLED(CONFIG_MFD_WM5110))
 44			regmap_config = &wm5110_spi_regmap;
 45		break;
 46	case WM1831:
 47	case CS47L24:
 48		if (IS_ENABLED(CONFIG_MFD_CS47L24))
 49			regmap_config = &cs47l24_spi_regmap;
 50		break;
 51	default:
 52		dev_err(&spi->dev, "Unknown device type %ld\n", type);
 53		return -EINVAL;
 54	}
 55
 56	if (!regmap_config) {
 57		dev_err(&spi->dev,
 58			"No kernel support for device type %ld\n", type);
 59		return -EINVAL;
 60	}
 61
 62	arizona = devm_kzalloc(&spi->dev, sizeof(*arizona), GFP_KERNEL);
 63	if (arizona == NULL)
 64		return -ENOMEM;
 65
 66	arizona->regmap = devm_regmap_init_spi(spi, regmap_config);
 67	if (IS_ERR(arizona->regmap)) {
 68		ret = PTR_ERR(arizona->regmap);
 69		dev_err(&spi->dev, "Failed to allocate register map: %d\n",
 70			ret);
 71		return ret;
 72	}
 73
 74	arizona->type = type;
 75	arizona->dev = &spi->dev;
 76	arizona->irq = spi->irq;
 77
 
 
 
 
 
 
 78	return arizona_dev_init(arizona);
 79}
 80
 81static int arizona_spi_remove(struct spi_device *spi)
 82{
 83	struct arizona *arizona = spi_get_drvdata(spi);
 84
 85	arizona_dev_exit(arizona);
 86
 87	return 0;
 88}
 89
 90static const struct spi_device_id arizona_spi_ids[] = {
 91	{ "wm5102", WM5102 },
 92	{ "wm5110", WM5110 },
 93	{ "wm8280", WM8280 },
 94	{ "wm1831", WM1831 },
 95	{ "cs47l24", CS47L24 },
 96	{ },
 97};
 98MODULE_DEVICE_TABLE(spi, arizona_spi_ids);
 99
100static struct spi_driver arizona_spi_driver = {
101	.driver = {
102		.name	= "arizona",
103		.pm	= &arizona_pm_ops,
104		.of_match_table	= of_match_ptr(arizona_of_match),
 
105	},
106	.probe		= arizona_spi_probe,
107	.remove		= arizona_spi_remove,
108	.id_table	= arizona_spi_ids,
109};
110
111module_spi_driver(arizona_spi_driver);
112
 
113MODULE_DESCRIPTION("Arizona SPI bus interface");
114MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
115MODULE_LICENSE("GPL");
v5.14.15
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * arizona-spi.c  --  Arizona SPI bus interface
  4 *
  5 * Copyright 2012 Wolfson Microelectronics plc
  6 *
  7 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
  8 */
  9
 10#include <linux/acpi.h>
 11#include <linux/err.h>
 12#include <linux/gpio/consumer.h>
 13#include <linux/gpio/machine.h>
 14#include <linux/module.h>
 15#include <linux/pm_runtime.h>
 16#include <linux/regmap.h>
 17#include <linux/regulator/consumer.h>
 18#include <linux/slab.h>
 19#include <linux/spi/spi.h>
 20#include <linux/of.h>
 21#include <uapi/linux/input-event-codes.h>
 22
 23#include <linux/mfd/arizona/core.h>
 24
 25#include "arizona.h"
 26
 27#ifdef CONFIG_ACPI
 28static const struct acpi_gpio_params reset_gpios = { 1, 0, false };
 29static const struct acpi_gpio_params ldoena_gpios = { 2, 0, false };
 30
 31static const struct acpi_gpio_mapping arizona_acpi_gpios[] = {
 32	{ "reset-gpios", &reset_gpios, 1, },
 33	{ "wlf,ldoena-gpios", &ldoena_gpios, 1 },
 34	{ }
 35};
 36
 37/*
 38 * The ACPI resources for the device only describe external GPIO-s. They do
 39 * not provide mappings for the GPIO-s coming from the Arizona codec itself.
 40 */
 41static const struct gpiod_lookup arizona_soc_gpios[] = {
 42	{ "arizona", 2, "wlf,spkvdd-ena", 0, GPIO_ACTIVE_HIGH },
 43	{ "arizona", 4, "wlf,micd-pol", 0, GPIO_ACTIVE_LOW },
 44};
 45
 46/*
 47 * The AOSP 3.5 mm Headset: Accessory Specification gives the following values:
 48 * Function A Play/Pause:           0 ohm
 49 * Function D Voice assistant:    135 ohm
 50 * Function B Volume Up           240 ohm
 51 * Function C Volume Down         470 ohm
 52 * Minimum Mic DC resistance     1000 ohm
 53 * Minimum Ear speaker impedance   16 ohm
 54 * Note the first max value below must be less then the min. speaker impedance,
 55 * to allow CTIA/OMTP detection to work. The other max values are the closest
 56 * value from extcon-arizona.c:arizona_micd_levels halfway 2 button resistances.
 57 */
 58static const struct arizona_micd_range arizona_micd_aosp_ranges[] = {
 59	{ .max =  11, .key = KEY_PLAYPAUSE },
 60	{ .max = 186, .key = KEY_VOICECOMMAND },
 61	{ .max = 348, .key = KEY_VOLUMEUP },
 62	{ .max = 752, .key = KEY_VOLUMEDOWN },
 63};
 64
 65static void arizona_spi_acpi_remove_lookup(void *lookup)
 66{
 67	gpiod_remove_lookup_table(lookup);
 68}
 69
 70static int arizona_spi_acpi_probe(struct arizona *arizona)
 71{
 72	struct gpiod_lookup_table *lookup;
 73	acpi_status status;
 74	int ret;
 75
 76	/* Add mappings for the 2 ACPI declared GPIOs used for reset and ldo-ena */
 77	devm_acpi_dev_add_driver_gpios(arizona->dev, arizona_acpi_gpios);
 78
 79	/* Add lookups for the SoCs own GPIOs used for micdet-polarity and spkVDD-enable */
 80	lookup = devm_kzalloc(arizona->dev,
 81			      struct_size(lookup, table, ARRAY_SIZE(arizona_soc_gpios) + 1),
 82			      GFP_KERNEL);
 83	if (!lookup)
 84		return -ENOMEM;
 85
 86	lookup->dev_id = dev_name(arizona->dev);
 87	memcpy(lookup->table, arizona_soc_gpios, sizeof(arizona_soc_gpios));
 88
 89	gpiod_add_lookup_table(lookup);
 90	ret = devm_add_action_or_reset(arizona->dev, arizona_spi_acpi_remove_lookup, lookup);
 91	if (ret)
 92		return ret;
 93
 94	/* Enable 32KHz clock from SoC to codec for jack-detect */
 95	status = acpi_evaluate_object(ACPI_HANDLE(arizona->dev), "CLKE", NULL, NULL);
 96	if (ACPI_FAILURE(status))
 97		dev_warn(arizona->dev, "Failed to enable 32KHz clk ACPI error %d\n", status);
 98
 99	/*
100	 * Some DSDTs wrongly declare the IRQ trigger-type as IRQF_TRIGGER_FALLING
101	 * The IRQ line will stay low when a new IRQ event happens between reading
102	 * the IRQ status flags and acknowledging them. When the IRQ line stays
103	 * low like this the IRQ will never trigger again when its type is set
104	 * to IRQF_TRIGGER_FALLING. Correct the IRQ trigger-type to fix this.
105	 *
106	 * Note theoretically it is possible that some boards are not capable
107	 * of handling active low level interrupts. In that case setting the
108	 * flag to IRQF_TRIGGER_FALLING would not be a bug (and we would need
109	 * to work around this) but so far all known usages of IRQF_TRIGGER_FALLING
110	 * are a bug in the board's DSDT.
111	 */
112	arizona->pdata.irq_flags = IRQF_TRIGGER_LOW;
113
114	/* Wait 200 ms after jack insertion */
115	arizona->pdata.micd_detect_debounce = 200;
116
117	/* Use standard AOSP values for headset-button mappings */
118	arizona->pdata.micd_ranges = arizona_micd_aosp_ranges;
119	arizona->pdata.num_micd_ranges = ARRAY_SIZE(arizona_micd_aosp_ranges);
120
121	return 0;
122}
123
124static const struct acpi_device_id arizona_acpi_match[] = {
125	{
126		.id = "WM510204",
127		.driver_data = WM5102,
128	},
129	{
130		.id = "WM510205",
131		.driver_data = WM5102,
132	},
133	{ }
134};
135MODULE_DEVICE_TABLE(acpi, arizona_acpi_match);
136#else
137static int arizona_spi_acpi_probe(struct arizona *arizona)
138{
139	return -ENODEV;
140}
141#endif
142
143static int arizona_spi_probe(struct spi_device *spi)
144{
145	const struct spi_device_id *id = spi_get_device_id(spi);
146	const void *match_data;
147	struct arizona *arizona;
148	const struct regmap_config *regmap_config = NULL;
149	unsigned long type = 0;
150	int ret;
151
152	match_data = device_get_match_data(&spi->dev);
153	if (match_data)
154		type = (unsigned long)match_data;
155	else if (id)
156		type = id->driver_data;
157
158	switch (type) {
159	case WM5102:
160		if (IS_ENABLED(CONFIG_MFD_WM5102))
161			regmap_config = &wm5102_spi_regmap;
162		break;
163	case WM5110:
164	case WM8280:
165		if (IS_ENABLED(CONFIG_MFD_WM5110))
166			regmap_config = &wm5110_spi_regmap;
167		break;
168	case WM1831:
169	case CS47L24:
170		if (IS_ENABLED(CONFIG_MFD_CS47L24))
171			regmap_config = &cs47l24_spi_regmap;
172		break;
173	default:
174		dev_err(&spi->dev, "Unknown device type %ld\n", type);
175		return -EINVAL;
176	}
177
178	if (!regmap_config) {
179		dev_err(&spi->dev,
180			"No kernel support for device type %ld\n", type);
181		return -EINVAL;
182	}
183
184	arizona = devm_kzalloc(&spi->dev, sizeof(*arizona), GFP_KERNEL);
185	if (arizona == NULL)
186		return -ENOMEM;
187
188	arizona->regmap = devm_regmap_init_spi(spi, regmap_config);
189	if (IS_ERR(arizona->regmap)) {
190		ret = PTR_ERR(arizona->regmap);
191		dev_err(&spi->dev, "Failed to allocate register map: %d\n",
192			ret);
193		return ret;
194	}
195
196	arizona->type = type;
197	arizona->dev = &spi->dev;
198	arizona->irq = spi->irq;
199
200	if (has_acpi_companion(&spi->dev)) {
201		ret = arizona_spi_acpi_probe(arizona);
202		if (ret)
203			return ret;
204	}
205
206	return arizona_dev_init(arizona);
207}
208
209static int arizona_spi_remove(struct spi_device *spi)
210{
211	struct arizona *arizona = spi_get_drvdata(spi);
212
213	arizona_dev_exit(arizona);
214
215	return 0;
216}
217
218static const struct spi_device_id arizona_spi_ids[] = {
219	{ "wm5102", WM5102 },
220	{ "wm5110", WM5110 },
221	{ "wm8280", WM8280 },
222	{ "wm1831", WM1831 },
223	{ "cs47l24", CS47L24 },
224	{ },
225};
226MODULE_DEVICE_TABLE(spi, arizona_spi_ids);
227
228static struct spi_driver arizona_spi_driver = {
229	.driver = {
230		.name	= "arizona",
231		.pm	= &arizona_pm_ops,
232		.of_match_table	= of_match_ptr(arizona_of_match),
233		.acpi_match_table = ACPI_PTR(arizona_acpi_match),
234	},
235	.probe		= arizona_spi_probe,
236	.remove		= arizona_spi_remove,
237	.id_table	= arizona_spi_ids,
238};
239
240module_spi_driver(arizona_spi_driver);
241
242MODULE_SOFTDEP("pre: arizona_ldo1");
243MODULE_DESCRIPTION("Arizona SPI bus interface");
244MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
245MODULE_LICENSE("GPL");