Loading...
1/*
2 * linux/drivers/message/fusion/mptbase.c
3 * This is the Fusion MPT base driver which supports multiple
4 * (SCSI + LAN) specialized protocol drivers.
5 * For use with LSI PCI chip/adapter(s)
6 * running LSI Fusion MPT (Message Passing Technology) firmware.
7 *
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
10 *
11 */
12/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13/*
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 NO WARRANTY
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
33
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
46*/
47/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
48
49#include <linux/kernel.h>
50#include <linux/module.h>
51#include <linux/errno.h>
52#include <linux/init.h>
53#include <linux/seq_file.h>
54#include <linux/slab.h>
55#include <linux/types.h>
56#include <linux/pci.h>
57#include <linux/kdev_t.h>
58#include <linux/blkdev.h>
59#include <linux/delay.h>
60#include <linux/interrupt.h> /* needed for in_interrupt() proto */
61#include <linux/dma-mapping.h>
62#include <linux/kthread.h>
63#include <scsi/scsi_host.h>
64
65#include "mptbase.h"
66#include "lsi/mpi_log_fc.h"
67
68/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
69#define my_NAME "Fusion MPT base driver"
70#define my_VERSION MPT_LINUX_VERSION_COMMON
71#define MYNAM "mptbase"
72
73MODULE_AUTHOR(MODULEAUTHOR);
74MODULE_DESCRIPTION(my_NAME);
75MODULE_LICENSE("GPL");
76MODULE_VERSION(my_VERSION);
77
78/*
79 * cmd line parameters
80 */
81
82static int mpt_msi_enable_spi;
83module_param(mpt_msi_enable_spi, int, 0);
84MODULE_PARM_DESC(mpt_msi_enable_spi,
85 " Enable MSI Support for SPI controllers (default=0)");
86
87static int mpt_msi_enable_fc;
88module_param(mpt_msi_enable_fc, int, 0);
89MODULE_PARM_DESC(mpt_msi_enable_fc,
90 " Enable MSI Support for FC controllers (default=0)");
91
92static int mpt_msi_enable_sas;
93module_param(mpt_msi_enable_sas, int, 0);
94MODULE_PARM_DESC(mpt_msi_enable_sas,
95 " Enable MSI Support for SAS controllers (default=0)");
96
97static int mpt_channel_mapping;
98module_param(mpt_channel_mapping, int, 0);
99MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
100
101static int mpt_debug_level;
102static int mpt_set_debug_level(const char *val, const struct kernel_param *kp);
103module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
104 &mpt_debug_level, 0600);
105MODULE_PARM_DESC(mpt_debug_level,
106 " debug level - refer to mptdebug.h - (default=0)");
107
108int mpt_fwfault_debug;
109EXPORT_SYMBOL(mpt_fwfault_debug);
110module_param(mpt_fwfault_debug, int, 0600);
111MODULE_PARM_DESC(mpt_fwfault_debug,
112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
113
114static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
115 [MPT_MAX_CALLBACKNAME_LEN+1];
116
117#ifdef MFCNT
118static int mfcounter = 0;
119#define PRINT_MF_COUNT 20000
120#endif
121
122/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
123/*
124 * Public data...
125 */
126
127#define WHOINIT_UNKNOWN 0xAA
128
129/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
130/*
131 * Private data...
132 */
133 /* Adapter link list */
134LIST_HEAD(ioc_list);
135 /* Callback lookup table */
136static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
137 /* Protocol driver class lookup table */
138static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
139 /* Event handler lookup table */
140static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
141 /* Reset handler lookup table */
142static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
143static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
144
145#ifdef CONFIG_PROC_FS
146static struct proc_dir_entry *mpt_proc_root_dir;
147#endif
148
149/*
150 * Driver Callback Index's
151 */
152static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
153static u8 last_drv_idx;
154
155/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
156/*
157 * Forward protos...
158 */
159static irqreturn_t mpt_interrupt(int irq, void *bus_id);
160static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
161 MPT_FRAME_HDR *reply);
162static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
163 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
164 int sleepFlag);
165static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
166static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
167static void mpt_adapter_disable(MPT_ADAPTER *ioc);
168static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
169
170static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
171static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
172static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
173static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
174static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
175static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
176static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
177static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
178static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
179static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
180static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
181static int PrimeIocFifos(MPT_ADAPTER *ioc);
182static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
183static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
184static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
185static int GetLanConfigPages(MPT_ADAPTER *ioc);
186static int GetIoUnitPage2(MPT_ADAPTER *ioc);
187int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
188static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
189static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
190static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
191static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
192static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
193static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
194 int sleepFlag);
195static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
196static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
197static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
198
199#ifdef CONFIG_PROC_FS
200static int mpt_summary_proc_show(struct seq_file *m, void *v);
201static int mpt_version_proc_show(struct seq_file *m, void *v);
202static int mpt_iocinfo_proc_show(struct seq_file *m, void *v);
203#endif
204static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
205
206static int ProcessEventNotification(MPT_ADAPTER *ioc,
207 EventNotificationReply_t *evReply, int *evHandlers);
208static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
209static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
210static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
211static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
212static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
213static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
214
215/* module entry point */
216static int __init fusion_init (void);
217static void __exit fusion_exit (void);
218
219#define CHIPREG_READ32(addr) readl_relaxed(addr)
220#define CHIPREG_READ32_dmasync(addr) readl(addr)
221#define CHIPREG_WRITE32(addr,val) writel(val, addr)
222#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
223#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
224
225static void
226pci_disable_io_access(struct pci_dev *pdev)
227{
228 u16 command_reg;
229
230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
231 command_reg &= ~1;
232 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
233}
234
235static void
236pci_enable_io_access(struct pci_dev *pdev)
237{
238 u16 command_reg;
239
240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
241 command_reg |= 1;
242 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
243}
244
245static int mpt_set_debug_level(const char *val, const struct kernel_param *kp)
246{
247 int ret = param_set_int(val, kp);
248 MPT_ADAPTER *ioc;
249
250 if (ret)
251 return ret;
252
253 list_for_each_entry(ioc, &ioc_list, list)
254 ioc->debug_level = mpt_debug_level;
255 return 0;
256}
257
258/**
259 * mpt_get_cb_idx - obtain cb_idx for registered driver
260 * @dclass: class driver enum
261 *
262 * Returns cb_idx, or zero means it wasn't found
263 **/
264static u8
265mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
266{
267 u8 cb_idx;
268
269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
270 if (MptDriverClass[cb_idx] == dclass)
271 return cb_idx;
272 return 0;
273}
274
275/**
276 * mpt_is_discovery_complete - determine if discovery has completed
277 * @ioc: per adatper instance
278 *
279 * Returns 1 when discovery completed, else zero.
280 */
281static int
282mpt_is_discovery_complete(MPT_ADAPTER *ioc)
283{
284 ConfigExtendedPageHeader_t hdr;
285 CONFIGPARMS cfg;
286 SasIOUnitPage0_t *buffer;
287 dma_addr_t dma_handle;
288 int rc = 0;
289
290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
291 memset(&cfg, 0, sizeof(CONFIGPARMS));
292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
295 cfg.cfghdr.ehdr = &hdr;
296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
297
298 if ((mpt_config(ioc, &cfg)))
299 goto out;
300 if (!hdr.ExtPageLength)
301 goto out;
302
303 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
304 &dma_handle);
305 if (!buffer)
306 goto out;
307
308 cfg.physAddr = dma_handle;
309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
310
311 if ((mpt_config(ioc, &cfg)))
312 goto out_free_consistent;
313
314 if (!(buffer->PhyData[0].PortFlags &
315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
316 rc = 1;
317
318 out_free_consistent:
319 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
320 buffer, dma_handle);
321 out:
322 return rc;
323}
324
325
326/**
327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
328 * @arg: input argument, used to derive ioc
329 *
330 * Return 0 if controller is removed from pci subsystem.
331 * Return -1 for other case.
332 */
333static int mpt_remove_dead_ioc_func(void *arg)
334{
335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
336 struct pci_dev *pdev;
337
338 if (!ioc)
339 return -1;
340
341 pdev = ioc->pcidev;
342 if (!pdev)
343 return -1;
344
345 pci_stop_and_remove_bus_device_locked(pdev);
346 return 0;
347}
348
349
350
351/**
352 * mpt_fault_reset_work - work performed on workq after ioc fault
353 * @work: input argument, used to derive ioc
354 *
355**/
356static void
357mpt_fault_reset_work(struct work_struct *work)
358{
359 MPT_ADAPTER *ioc =
360 container_of(work, MPT_ADAPTER, fault_reset_work.work);
361 u32 ioc_raw_state;
362 int rc;
363 unsigned long flags;
364 MPT_SCSI_HOST *hd;
365 struct task_struct *p;
366
367 if (ioc->ioc_reset_in_progress || !ioc->active)
368 goto out;
369
370
371 ioc_raw_state = mpt_GetIocState(ioc, 0);
372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
374 ioc->name, __func__);
375
376 /*
377 * Call mptscsih_flush_pending_cmds callback so that we
378 * flush all pending commands back to OS.
379 * This call is required to aovid deadlock at block layer.
380 * Dead IOC will fail to do diag reset,and this call is safe
381 * since dead ioc will never return any command back from HW.
382 */
383 hd = shost_priv(ioc->sh);
384 ioc->schedule_dead_ioc_flush_running_cmds(hd);
385
386 /*Remove the Dead Host */
387 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
388 "mpt_dead_ioc_%d", ioc->id);
389 if (IS_ERR(p)) {
390 printk(MYIOC_s_ERR_FMT
391 "%s: Running mpt_dead_ioc thread failed !\n",
392 ioc->name, __func__);
393 } else {
394 printk(MYIOC_s_WARN_FMT
395 "%s: Running mpt_dead_ioc thread success !\n",
396 ioc->name, __func__);
397 }
398 return; /* don't rearm timer */
399 }
400
401 if ((ioc_raw_state & MPI_IOC_STATE_MASK)
402 == MPI_IOC_STATE_FAULT) {
403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
406 ioc->name, __func__);
407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
409 __func__, (rc == 0) ? "success" : "failed");
410 ioc_raw_state = mpt_GetIocState(ioc, 0);
411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
413 "reset (%04xh)\n", ioc->name, ioc_raw_state &
414 MPI_DOORBELL_DATA_MASK);
415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
416 if ((mpt_is_discovery_complete(ioc))) {
417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
418 "discovery_quiesce_io flag\n", ioc->name));
419 ioc->sas_discovery_quiesce_io = 0;
420 }
421 }
422
423 out:
424 /*
425 * Take turns polling alternate controller
426 */
427 if (ioc->alt_ioc)
428 ioc = ioc->alt_ioc;
429
430 /* rearm the timer */
431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
432 if (ioc->reset_work_q)
433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
434 msecs_to_jiffies(MPT_POLLING_INTERVAL));
435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
436}
437
438
439/*
440 * Process turbo (context) reply...
441 */
442static void
443mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
444{
445 MPT_FRAME_HDR *mf = NULL;
446 MPT_FRAME_HDR *mr = NULL;
447 u16 req_idx = 0;
448 u8 cb_idx;
449
450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
451 ioc->name, pa));
452
453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
455 req_idx = pa & 0x0000FFFF;
456 cb_idx = (pa & 0x00FF0000) >> 16;
457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
458 break;
459 case MPI_CONTEXT_REPLY_TYPE_LAN:
460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
461 /*
462 * Blind set of mf to NULL here was fatal
463 * after lan_reply says "freeme"
464 * Fix sort of combined with an optimization here;
465 * added explicit check for case where lan_reply
466 * was just returning 1 and doing nothing else.
467 * For this case skip the callback, but set up
468 * proper mf value first here:-)
469 */
470 if ((pa & 0x58000000) == 0x58000000) {
471 req_idx = pa & 0x0000FFFF;
472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
473 mpt_free_msg_frame(ioc, mf);
474 mb();
475 return;
476 break;
477 }
478 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
479 break;
480 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
481 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
482 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
483 break;
484 default:
485 cb_idx = 0;
486 BUG();
487 }
488
489 /* Check for (valid) IO callback! */
490 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
491 MptCallbacks[cb_idx] == NULL) {
492 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
493 __func__, ioc->name, cb_idx);
494 goto out;
495 }
496
497 if (MptCallbacks[cb_idx](ioc, mf, mr))
498 mpt_free_msg_frame(ioc, mf);
499 out:
500 mb();
501}
502
503static void
504mpt_reply(MPT_ADAPTER *ioc, u32 pa)
505{
506 MPT_FRAME_HDR *mf;
507 MPT_FRAME_HDR *mr;
508 u16 req_idx;
509 u8 cb_idx;
510 int freeme;
511
512 u32 reply_dma_low;
513 u16 ioc_stat;
514
515 /* non-TURBO reply! Hmmm, something may be up...
516 * Newest turbo reply mechanism; get address
517 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
518 */
519
520 /* Map DMA address of reply header to cpu address.
521 * pa is 32 bits - but the dma address may be 32 or 64 bits
522 * get offset based only only the low addresses
523 */
524
525 reply_dma_low = (pa <<= 1);
526 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
527 (reply_dma_low - ioc->reply_frames_low_dma));
528
529 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
530 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
531 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
532
533 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
534 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
535 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
536
537 /* Check/log IOC log info
538 */
539 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
540 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
541 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
542 if (ioc->bus_type == FC)
543 mpt_fc_log_info(ioc, log_info);
544 else if (ioc->bus_type == SPI)
545 mpt_spi_log_info(ioc, log_info);
546 else if (ioc->bus_type == SAS)
547 mpt_sas_log_info(ioc, log_info, cb_idx);
548 }
549
550 if (ioc_stat & MPI_IOCSTATUS_MASK)
551 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
552
553 /* Check for (valid) IO callback! */
554 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
555 MptCallbacks[cb_idx] == NULL) {
556 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
557 __func__, ioc->name, cb_idx);
558 freeme = 0;
559 goto out;
560 }
561
562 freeme = MptCallbacks[cb_idx](ioc, mf, mr);
563
564 out:
565 /* Flush (non-TURBO) reply with a WRITE! */
566 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
567
568 if (freeme)
569 mpt_free_msg_frame(ioc, mf);
570 mb();
571}
572
573/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
574/**
575 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
576 * @irq: irq number (not used)
577 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
578 *
579 * This routine is registered via the request_irq() kernel API call,
580 * and handles all interrupts generated from a specific MPT adapter
581 * (also referred to as a IO Controller or IOC).
582 * This routine must clear the interrupt from the adapter and does
583 * so by reading the reply FIFO. Multiple replies may be processed
584 * per single call to this routine.
585 *
586 * This routine handles register-level access of the adapter but
587 * dispatches (calls) a protocol-specific callback routine to handle
588 * the protocol-specific details of the MPT request completion.
589 */
590static irqreturn_t
591mpt_interrupt(int irq, void *bus_id)
592{
593 MPT_ADAPTER *ioc = bus_id;
594 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
595
596 if (pa == 0xFFFFFFFF)
597 return IRQ_NONE;
598
599 /*
600 * Drain the reply FIFO!
601 */
602 do {
603 if (pa & MPI_ADDRESS_REPLY_A_BIT)
604 mpt_reply(ioc, pa);
605 else
606 mpt_turbo_reply(ioc, pa);
607 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
608 } while (pa != 0xFFFFFFFF);
609
610 return IRQ_HANDLED;
611}
612
613/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
614/**
615 * mptbase_reply - MPT base driver's callback routine
616 * @ioc: Pointer to MPT_ADAPTER structure
617 * @req: Pointer to original MPT request frame
618 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
619 *
620 * MPT base driver's callback routine; all base driver
621 * "internal" request/reply processing is routed here.
622 * Currently used for EventNotification and EventAck handling.
623 *
624 * Returns 1 indicating original alloc'd request frame ptr
625 * should be freed, or 0 if it shouldn't.
626 */
627static int
628mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
629{
630 EventNotificationReply_t *pEventReply;
631 u8 event;
632 int evHandlers;
633 int freereq = 1;
634
635 switch (reply->u.hdr.Function) {
636 case MPI_FUNCTION_EVENT_NOTIFICATION:
637 pEventReply = (EventNotificationReply_t *)reply;
638 evHandlers = 0;
639 ProcessEventNotification(ioc, pEventReply, &evHandlers);
640 event = le32_to_cpu(pEventReply->Event) & 0xFF;
641 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
642 freereq = 0;
643 if (event != MPI_EVENT_EVENT_CHANGE)
644 break;
645 fallthrough;
646 case MPI_FUNCTION_CONFIG:
647 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
649 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
650 memcpy(ioc->mptbase_cmds.reply, reply,
651 min(MPT_DEFAULT_FRAME_SIZE,
652 4 * reply->u.reply.MsgLength));
653 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
654 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
655 complete(&ioc->mptbase_cmds.done);
656 } else
657 freereq = 0;
658 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
659 freereq = 1;
660 break;
661 case MPI_FUNCTION_EVENT_ACK:
662 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
663 "EventAck reply received\n", ioc->name));
664 break;
665 default:
666 printk(MYIOC_s_ERR_FMT
667 "Unexpected msg function (=%02Xh) reply received!\n",
668 ioc->name, reply->u.hdr.Function);
669 break;
670 }
671
672 /*
673 * Conditionally tell caller to free the original
674 * EventNotification/EventAck/unexpected request frame!
675 */
676 return freereq;
677}
678
679/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
680/**
681 * mpt_register - Register protocol-specific main callback handler.
682 * @cbfunc: callback function pointer
683 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
684 * @func_name: call function's name
685 *
686 * This routine is called by a protocol-specific driver (SCSI host,
687 * LAN, SCSI target) to register its reply callback routine. Each
688 * protocol-specific driver must do this before it will be able to
689 * use any IOC resources, such as obtaining request frames.
690 *
691 * NOTES: The SCSI protocol driver currently calls this routine thrice
692 * in order to register separate callbacks; one for "normal" SCSI IO;
693 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
694 *
695 * Returns u8 valued "handle" in the range (and S.O.D. order)
696 * {N,...,7,6,5,...,1} if successful.
697 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
698 * considered an error by the caller.
699 */
700u8
701mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
702{
703 u8 cb_idx;
704 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
705
706 /*
707 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
708 * (slot/handle 0 is reserved!)
709 */
710 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
711 if (MptCallbacks[cb_idx] == NULL) {
712 MptCallbacks[cb_idx] = cbfunc;
713 MptDriverClass[cb_idx] = dclass;
714 MptEvHandlers[cb_idx] = NULL;
715 last_drv_idx = cb_idx;
716 strlcpy(MptCallbacksName[cb_idx], func_name,
717 MPT_MAX_CALLBACKNAME_LEN+1);
718 break;
719 }
720 }
721
722 return last_drv_idx;
723}
724
725/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
726/**
727 * mpt_deregister - Deregister a protocol drivers resources.
728 * @cb_idx: previously registered callback handle
729 *
730 * Each protocol-specific driver should call this routine when its
731 * module is unloaded.
732 */
733void
734mpt_deregister(u8 cb_idx)
735{
736 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
737 MptCallbacks[cb_idx] = NULL;
738 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
739 MptEvHandlers[cb_idx] = NULL;
740
741 last_drv_idx++;
742 }
743}
744
745/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
746/**
747 * mpt_event_register - Register protocol-specific event callback handler.
748 * @cb_idx: previously registered (via mpt_register) callback handle
749 * @ev_cbfunc: callback function
750 *
751 * This routine can be called by one or more protocol-specific drivers
752 * if/when they choose to be notified of MPT events.
753 *
754 * Returns 0 for success.
755 */
756int
757mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
758{
759 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
760 return -1;
761
762 MptEvHandlers[cb_idx] = ev_cbfunc;
763 return 0;
764}
765
766/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
767/**
768 * mpt_event_deregister - Deregister protocol-specific event callback handler
769 * @cb_idx: previously registered callback handle
770 *
771 * Each protocol-specific driver should call this routine
772 * when it does not (or can no longer) handle events,
773 * or when its module is unloaded.
774 */
775void
776mpt_event_deregister(u8 cb_idx)
777{
778 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
779 return;
780
781 MptEvHandlers[cb_idx] = NULL;
782}
783
784/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
785/**
786 * mpt_reset_register - Register protocol-specific IOC reset handler.
787 * @cb_idx: previously registered (via mpt_register) callback handle
788 * @reset_func: reset function
789 *
790 * This routine can be called by one or more protocol-specific drivers
791 * if/when they choose to be notified of IOC resets.
792 *
793 * Returns 0 for success.
794 */
795int
796mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
797{
798 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
799 return -1;
800
801 MptResetHandlers[cb_idx] = reset_func;
802 return 0;
803}
804
805/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
806/**
807 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
808 * @cb_idx: previously registered callback handle
809 *
810 * Each protocol-specific driver should call this routine
811 * when it does not (or can no longer) handle IOC reset handling,
812 * or when its module is unloaded.
813 */
814void
815mpt_reset_deregister(u8 cb_idx)
816{
817 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
818 return;
819
820 MptResetHandlers[cb_idx] = NULL;
821}
822
823/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
824/**
825 * mpt_device_driver_register - Register device driver hooks
826 * @dd_cbfunc: driver callbacks struct
827 * @cb_idx: MPT protocol driver index
828 */
829int
830mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
831{
832 MPT_ADAPTER *ioc;
833 const struct pci_device_id *id;
834
835 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
836 return -EINVAL;
837
838 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
839
840 /* call per pci device probe entry point */
841 list_for_each_entry(ioc, &ioc_list, list) {
842 id = ioc->pcidev->driver ?
843 ioc->pcidev->driver->id_table : NULL;
844 if (dd_cbfunc->probe)
845 dd_cbfunc->probe(ioc->pcidev, id);
846 }
847
848 return 0;
849}
850
851/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
852/**
853 * mpt_device_driver_deregister - DeRegister device driver hooks
854 * @cb_idx: MPT protocol driver index
855 */
856void
857mpt_device_driver_deregister(u8 cb_idx)
858{
859 struct mpt_pci_driver *dd_cbfunc;
860 MPT_ADAPTER *ioc;
861
862 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
863 return;
864
865 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
866
867 list_for_each_entry(ioc, &ioc_list, list) {
868 if (dd_cbfunc->remove)
869 dd_cbfunc->remove(ioc->pcidev);
870 }
871
872 MptDeviceDriverHandlers[cb_idx] = NULL;
873}
874
875
876/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
877/**
878 * mpt_get_msg_frame - Obtain an MPT request frame from the pool
879 * @cb_idx: Handle of registered MPT protocol driver
880 * @ioc: Pointer to MPT adapter structure
881 *
882 * Obtain an MPT request frame from the pool (of 1024) that are
883 * allocated per MPT adapter.
884 *
885 * Returns pointer to a MPT request frame or %NULL if none are available
886 * or IOC is not active.
887 */
888MPT_FRAME_HDR*
889mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
890{
891 MPT_FRAME_HDR *mf;
892 unsigned long flags;
893 u16 req_idx; /* Request index */
894
895 /* validate handle and ioc identifier */
896
897#ifdef MFCNT
898 if (!ioc->active)
899 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
900 "returning NULL!\n", ioc->name);
901#endif
902
903 /* If interrupts are not attached, do not return a request frame */
904 if (!ioc->active)
905 return NULL;
906
907 spin_lock_irqsave(&ioc->FreeQlock, flags);
908 if (!list_empty(&ioc->FreeQ)) {
909 int req_offset;
910
911 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
912 u.frame.linkage.list);
913 list_del(&mf->u.frame.linkage.list);
914 mf->u.frame.linkage.arg1 = 0;
915 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
916 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
917 /* u16! */
918 req_idx = req_offset / ioc->req_sz;
919 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
920 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
921 /* Default, will be changed if necessary in SG generation */
922 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
923#ifdef MFCNT
924 ioc->mfcnt++;
925#endif
926 }
927 else
928 mf = NULL;
929 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
930
931#ifdef MFCNT
932 if (mf == NULL)
933 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
934 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
935 ioc->req_depth);
936 mfcounter++;
937 if (mfcounter == PRINT_MF_COUNT)
938 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
939 ioc->mfcnt, ioc->req_depth);
940#endif
941
942 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
943 ioc->name, cb_idx, ioc->id, mf));
944 return mf;
945}
946
947/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
948/**
949 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
950 * @cb_idx: Handle of registered MPT protocol driver
951 * @ioc: Pointer to MPT adapter structure
952 * @mf: Pointer to MPT request frame
953 *
954 * This routine posts an MPT request frame to the request post FIFO of a
955 * specific MPT adapter.
956 */
957void
958mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
959{
960 u32 mf_dma_addr;
961 int req_offset;
962 u16 req_idx; /* Request index */
963
964 /* ensure values are reset properly! */
965 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
966 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
967 /* u16! */
968 req_idx = req_offset / ioc->req_sz;
969 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
970 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
971
972 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
973
974 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
975 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
976 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
977 ioc->RequestNB[req_idx]));
978 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
979}
980
981/**
982 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
983 * @cb_idx: Handle of registered MPT protocol driver
984 * @ioc: Pointer to MPT adapter structure
985 * @mf: Pointer to MPT request frame
986 *
987 * Send a protocol-specific MPT request frame to an IOC using
988 * hi-priority request queue.
989 *
990 * This routine posts an MPT request frame to the request post FIFO of a
991 * specific MPT adapter.
992 **/
993void
994mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
995{
996 u32 mf_dma_addr;
997 int req_offset;
998 u16 req_idx; /* Request index */
999
1000 /* ensure values are reset properly! */
1001 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1002 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
1003 req_idx = req_offset / ioc->req_sz;
1004 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1005 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1006
1007 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1008
1009 mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1010 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1011 ioc->name, mf_dma_addr, req_idx));
1012 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1013}
1014
1015/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1016/**
1017 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1018 * @ioc: Pointer to MPT adapter structure
1019 * @mf: Pointer to MPT request frame
1020 *
1021 * This routine places a MPT request frame back on the MPT adapter's
1022 * FreeQ.
1023 */
1024void
1025mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1026{
1027 unsigned long flags;
1028
1029 /* Put Request back on FreeQ! */
1030 spin_lock_irqsave(&ioc->FreeQlock, flags);
1031 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1032 goto out;
1033 /* signature to know if this mf is freed */
1034 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1035 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ);
1036#ifdef MFCNT
1037 ioc->mfcnt--;
1038#endif
1039 out:
1040 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1041}
1042
1043/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1044/**
1045 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1046 * @pAddr: virtual address for SGE
1047 * @flagslength: SGE flags and data transfer length
1048 * @dma_addr: Physical address
1049 *
1050 * This routine places a MPT request frame back on the MPT adapter's
1051 * FreeQ.
1052 */
1053static void
1054mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1055{
1056 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1057 pSge->FlagsLength = cpu_to_le32(flagslength);
1058 pSge->Address = cpu_to_le32(dma_addr);
1059}
1060
1061/**
1062 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1063 * @pAddr: virtual address for SGE
1064 * @flagslength: SGE flags and data transfer length
1065 * @dma_addr: Physical address
1066 *
1067 * This routine places a MPT request frame back on the MPT adapter's
1068 * FreeQ.
1069 **/
1070static void
1071mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1072{
1073 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1074 pSge->Address.Low = cpu_to_le32
1075 (lower_32_bits(dma_addr));
1076 pSge->Address.High = cpu_to_le32
1077 (upper_32_bits(dma_addr));
1078 pSge->FlagsLength = cpu_to_le32
1079 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1080}
1081
1082/**
1083 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1084 * @pAddr: virtual address for SGE
1085 * @flagslength: SGE flags and data transfer length
1086 * @dma_addr: Physical address
1087 *
1088 * This routine places a MPT request frame back on the MPT adapter's
1089 * FreeQ.
1090 **/
1091static void
1092mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1093{
1094 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1095 u32 tmp;
1096
1097 pSge->Address.Low = cpu_to_le32
1098 (lower_32_bits(dma_addr));
1099 tmp = (u32)(upper_32_bits(dma_addr));
1100
1101 /*
1102 * 1078 errata workaround for the 36GB limitation
1103 */
1104 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
1105 flagslength |=
1106 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1107 tmp |= (1<<31);
1108 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1109 printk(KERN_DEBUG "1078 P0M2 addressing for "
1110 "addr = 0x%llx len = %d\n",
1111 (unsigned long long)dma_addr,
1112 MPI_SGE_LENGTH(flagslength));
1113 }
1114
1115 pSge->Address.High = cpu_to_le32(tmp);
1116 pSge->FlagsLength = cpu_to_le32(
1117 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1118}
1119
1120/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1121/**
1122 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1123 * @pAddr: virtual address for SGE
1124 * @next: nextChainOffset value (u32's)
1125 * @length: length of next SGL segment
1126 * @dma_addr: Physical address
1127 *
1128 */
1129static void
1130mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1131{
1132 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1133
1134 pChain->Length = cpu_to_le16(length);
1135 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1136 pChain->NextChainOffset = next;
1137 pChain->Address = cpu_to_le32(dma_addr);
1138}
1139
1140/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1141/**
1142 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1143 * @pAddr: virtual address for SGE
1144 * @next: nextChainOffset value (u32's)
1145 * @length: length of next SGL segment
1146 * @dma_addr: Physical address
1147 *
1148 */
1149static void
1150mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1151{
1152 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1153 u32 tmp = dma_addr & 0xFFFFFFFF;
1154
1155 pChain->Length = cpu_to_le16(length);
1156 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1157 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1158
1159 pChain->NextChainOffset = next;
1160
1161 pChain->Address.Low = cpu_to_le32(tmp);
1162 tmp = (u32)(upper_32_bits(dma_addr));
1163 pChain->Address.High = cpu_to_le32(tmp);
1164}
1165
1166/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1167/**
1168 * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1169 * @cb_idx: Handle of registered MPT protocol driver
1170 * @ioc: Pointer to MPT adapter structure
1171 * @reqBytes: Size of the request in bytes
1172 * @req: Pointer to MPT request frame
1173 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1174 *
1175 * This routine is used exclusively to send MptScsiTaskMgmt
1176 * requests since they are required to be sent via doorbell handshake.
1177 *
1178 * NOTE: It is the callers responsibility to byte-swap fields in the
1179 * request which are greater than 1 byte in size.
1180 *
1181 * Returns 0 for success, non-zero for failure.
1182 */
1183int
1184mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1185{
1186 int r = 0;
1187 u8 *req_as_bytes;
1188 int ii;
1189
1190 /* State is known to be good upon entering
1191 * this function so issue the bus reset
1192 * request.
1193 */
1194
1195 /*
1196 * Emulate what mpt_put_msg_frame() does /wrt to sanity
1197 * setting cb_idx/req_idx. But ONLY if this request
1198 * is in proper (pre-alloc'd) request buffer range...
1199 */
1200 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1201 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1202 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1203 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1204 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1205 }
1206
1207 /* Make sure there are no doorbells */
1208 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1209
1210 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1211 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1212 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1213
1214 /* Wait for IOC doorbell int */
1215 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1216 return ii;
1217 }
1218
1219 /* Read doorbell and check for active bit */
1220 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1221 return -5;
1222
1223 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1224 ioc->name, ii));
1225
1226 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1227
1228 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1229 return -2;
1230 }
1231
1232 /* Send request via doorbell handshake */
1233 req_as_bytes = (u8 *) req;
1234 for (ii = 0; ii < reqBytes/4; ii++) {
1235 u32 word;
1236
1237 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1238 (req_as_bytes[(ii*4) + 1] << 8) |
1239 (req_as_bytes[(ii*4) + 2] << 16) |
1240 (req_as_bytes[(ii*4) + 3] << 24));
1241 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1242 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1243 r = -3;
1244 break;
1245 }
1246 }
1247
1248 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1249 r = 0;
1250 else
1251 r = -4;
1252
1253 /* Make sure there are no doorbells */
1254 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1255
1256 return r;
1257}
1258
1259/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1260/**
1261 * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1262 * @ioc: Pointer to MPT adapter structure
1263 * @access_control_value: define bits below
1264 * @sleepFlag: Specifies whether the process can sleep
1265 *
1266 * Provides mechanism for the host driver to control the IOC's
1267 * Host Page Buffer access.
1268 *
1269 * Access Control Value - bits[15:12]
1270 * 0h Reserved
1271 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1272 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1273 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1274 *
1275 * Returns 0 for success, non-zero for failure.
1276 */
1277
1278static int
1279mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1280{
1281 int r = 0;
1282
1283 /* return if in use */
1284 if (CHIPREG_READ32(&ioc->chip->Doorbell)
1285 & MPI_DOORBELL_ACTIVE)
1286 return -1;
1287
1288 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1289
1290 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1291 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1292 <<MPI_DOORBELL_FUNCTION_SHIFT) |
1293 (access_control_value<<12)));
1294
1295 /* Wait for IOC to clear Doorbell Status bit */
1296 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1297 return -2;
1298 }else
1299 return 0;
1300}
1301
1302/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1303/**
1304 * mpt_host_page_alloc - allocate system memory for the fw
1305 * @ioc: Pointer to pointer to IOC adapter
1306 * @ioc_init: Pointer to ioc init config page
1307 *
1308 * If we already allocated memory in past, then resend the same pointer.
1309 * Returns 0 for success, non-zero for failure.
1310 */
1311static int
1312mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1313{
1314 char *psge;
1315 int flags_length;
1316 u32 host_page_buffer_sz=0;
1317
1318 if(!ioc->HostPageBuffer) {
1319
1320 host_page_buffer_sz =
1321 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1322
1323 if(!host_page_buffer_sz)
1324 return 0; /* fw doesn't need any host buffers */
1325
1326 /* spin till we get enough memory */
1327 while (host_page_buffer_sz > 0) {
1328 ioc->HostPageBuffer =
1329 dma_alloc_coherent(&ioc->pcidev->dev,
1330 host_page_buffer_sz,
1331 &ioc->HostPageBuffer_dma,
1332 GFP_KERNEL);
1333 if (ioc->HostPageBuffer) {
1334 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1335 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1336 ioc->name, ioc->HostPageBuffer,
1337 (u32)ioc->HostPageBuffer_dma,
1338 host_page_buffer_sz));
1339 ioc->alloc_total += host_page_buffer_sz;
1340 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1341 break;
1342 }
1343
1344 host_page_buffer_sz -= (4*1024);
1345 }
1346 }
1347
1348 if(!ioc->HostPageBuffer) {
1349 printk(MYIOC_s_ERR_FMT
1350 "Failed to alloc memory for host_page_buffer!\n",
1351 ioc->name);
1352 return -999;
1353 }
1354
1355 psge = (char *)&ioc_init->HostPageBufferSGE;
1356 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1357 MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1358 MPI_SGE_FLAGS_HOST_TO_IOC |
1359 MPI_SGE_FLAGS_END_OF_BUFFER;
1360 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1361 flags_length |= ioc->HostPageBuffer_sz;
1362 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1363 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1364
1365 return 0;
1366}
1367
1368/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1369/**
1370 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1371 * @iocid: IOC unique identifier (integer)
1372 * @iocpp: Pointer to pointer to IOC adapter
1373 *
1374 * Given a unique IOC identifier, set pointer to the associated MPT
1375 * adapter structure.
1376 *
1377 * Returns iocid and sets iocpp if iocid is found.
1378 * Returns -1 if iocid is not found.
1379 */
1380int
1381mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1382{
1383 MPT_ADAPTER *ioc;
1384
1385 list_for_each_entry(ioc,&ioc_list,list) {
1386 if (ioc->id == iocid) {
1387 *iocpp =ioc;
1388 return iocid;
1389 }
1390 }
1391
1392 *iocpp = NULL;
1393 return -1;
1394}
1395
1396/**
1397 * mpt_get_product_name - returns product string
1398 * @vendor: pci vendor id
1399 * @device: pci device id
1400 * @revision: pci revision id
1401 *
1402 * Returns product string displayed when driver loads,
1403 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1404 *
1405 **/
1406static const char*
1407mpt_get_product_name(u16 vendor, u16 device, u8 revision)
1408{
1409 char *product_str = NULL;
1410
1411 if (vendor == PCI_VENDOR_ID_BROCADE) {
1412 switch (device)
1413 {
1414 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1415 switch (revision)
1416 {
1417 case 0x00:
1418 product_str = "BRE040 A0";
1419 break;
1420 case 0x01:
1421 product_str = "BRE040 A1";
1422 break;
1423 default:
1424 product_str = "BRE040";
1425 break;
1426 }
1427 break;
1428 }
1429 goto out;
1430 }
1431
1432 switch (device)
1433 {
1434 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1435 product_str = "LSIFC909 B1";
1436 break;
1437 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1438 product_str = "LSIFC919 B0";
1439 break;
1440 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1441 product_str = "LSIFC929 B0";
1442 break;
1443 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1444 if (revision < 0x80)
1445 product_str = "LSIFC919X A0";
1446 else
1447 product_str = "LSIFC919XL A1";
1448 break;
1449 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1450 if (revision < 0x80)
1451 product_str = "LSIFC929X A0";
1452 else
1453 product_str = "LSIFC929XL A1";
1454 break;
1455 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1456 product_str = "LSIFC939X A1";
1457 break;
1458 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1459 product_str = "LSIFC949X A1";
1460 break;
1461 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1462 switch (revision)
1463 {
1464 case 0x00:
1465 product_str = "LSIFC949E A0";
1466 break;
1467 case 0x01:
1468 product_str = "LSIFC949E A1";
1469 break;
1470 default:
1471 product_str = "LSIFC949E";
1472 break;
1473 }
1474 break;
1475 case MPI_MANUFACTPAGE_DEVID_53C1030:
1476 switch (revision)
1477 {
1478 case 0x00:
1479 product_str = "LSI53C1030 A0";
1480 break;
1481 case 0x01:
1482 product_str = "LSI53C1030 B0";
1483 break;
1484 case 0x03:
1485 product_str = "LSI53C1030 B1";
1486 break;
1487 case 0x07:
1488 product_str = "LSI53C1030 B2";
1489 break;
1490 case 0x08:
1491 product_str = "LSI53C1030 C0";
1492 break;
1493 case 0x80:
1494 product_str = "LSI53C1030T A0";
1495 break;
1496 case 0x83:
1497 product_str = "LSI53C1030T A2";
1498 break;
1499 case 0x87:
1500 product_str = "LSI53C1030T A3";
1501 break;
1502 case 0xc1:
1503 product_str = "LSI53C1020A A1";
1504 break;
1505 default:
1506 product_str = "LSI53C1030";
1507 break;
1508 }
1509 break;
1510 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1511 switch (revision)
1512 {
1513 case 0x03:
1514 product_str = "LSI53C1035 A2";
1515 break;
1516 case 0x04:
1517 product_str = "LSI53C1035 B0";
1518 break;
1519 default:
1520 product_str = "LSI53C1035";
1521 break;
1522 }
1523 break;
1524 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1525 switch (revision)
1526 {
1527 case 0x00:
1528 product_str = "LSISAS1064 A1";
1529 break;
1530 case 0x01:
1531 product_str = "LSISAS1064 A2";
1532 break;
1533 case 0x02:
1534 product_str = "LSISAS1064 A3";
1535 break;
1536 case 0x03:
1537 product_str = "LSISAS1064 A4";
1538 break;
1539 default:
1540 product_str = "LSISAS1064";
1541 break;
1542 }
1543 break;
1544 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1545 switch (revision)
1546 {
1547 case 0x00:
1548 product_str = "LSISAS1064E A0";
1549 break;
1550 case 0x01:
1551 product_str = "LSISAS1064E B0";
1552 break;
1553 case 0x02:
1554 product_str = "LSISAS1064E B1";
1555 break;
1556 case 0x04:
1557 product_str = "LSISAS1064E B2";
1558 break;
1559 case 0x08:
1560 product_str = "LSISAS1064E B3";
1561 break;
1562 default:
1563 product_str = "LSISAS1064E";
1564 break;
1565 }
1566 break;
1567 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1568 switch (revision)
1569 {
1570 case 0x00:
1571 product_str = "LSISAS1068 A0";
1572 break;
1573 case 0x01:
1574 product_str = "LSISAS1068 B0";
1575 break;
1576 case 0x02:
1577 product_str = "LSISAS1068 B1";
1578 break;
1579 default:
1580 product_str = "LSISAS1068";
1581 break;
1582 }
1583 break;
1584 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1585 switch (revision)
1586 {
1587 case 0x00:
1588 product_str = "LSISAS1068E A0";
1589 break;
1590 case 0x01:
1591 product_str = "LSISAS1068E B0";
1592 break;
1593 case 0x02:
1594 product_str = "LSISAS1068E B1";
1595 break;
1596 case 0x04:
1597 product_str = "LSISAS1068E B2";
1598 break;
1599 case 0x08:
1600 product_str = "LSISAS1068E B3";
1601 break;
1602 default:
1603 product_str = "LSISAS1068E";
1604 break;
1605 }
1606 break;
1607 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1608 switch (revision)
1609 {
1610 case 0x00:
1611 product_str = "LSISAS1078 A0";
1612 break;
1613 case 0x01:
1614 product_str = "LSISAS1078 B0";
1615 break;
1616 case 0x02:
1617 product_str = "LSISAS1078 C0";
1618 break;
1619 case 0x03:
1620 product_str = "LSISAS1078 C1";
1621 break;
1622 case 0x04:
1623 product_str = "LSISAS1078 C2";
1624 break;
1625 default:
1626 product_str = "LSISAS1078";
1627 break;
1628 }
1629 break;
1630 }
1631
1632 out:
1633 return product_str;
1634}
1635
1636/**
1637 * mpt_mapresources - map in memory mapped io
1638 * @ioc: Pointer to pointer to IOC adapter
1639 *
1640 **/
1641static int
1642mpt_mapresources(MPT_ADAPTER *ioc)
1643{
1644 u8 __iomem *mem;
1645 int ii;
1646 resource_size_t mem_phys;
1647 unsigned long port;
1648 u32 msize;
1649 u32 psize;
1650 int r = -ENODEV;
1651 struct pci_dev *pdev;
1652
1653 pdev = ioc->pcidev;
1654 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1655 if (pci_enable_device_mem(pdev)) {
1656 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1657 "failed\n", ioc->name);
1658 return r;
1659 }
1660 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1661 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1662 "MEM failed\n", ioc->name);
1663 goto out_pci_disable_device;
1664 }
1665
1666 if (sizeof(dma_addr_t) > 4) {
1667 const uint64_t required_mask = dma_get_required_mask
1668 (&pdev->dev);
1669 if (required_mask > DMA_BIT_MASK(32)
1670 && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
1671 && !pci_set_consistent_dma_mask(pdev,
1672 DMA_BIT_MASK(64))) {
1673 ioc->dma_mask = DMA_BIT_MASK(64);
1674 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1675 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1676 ioc->name));
1677 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1678 && !pci_set_consistent_dma_mask(pdev,
1679 DMA_BIT_MASK(32))) {
1680 ioc->dma_mask = DMA_BIT_MASK(32);
1681 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1682 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1683 ioc->name));
1684 } else {
1685 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1686 ioc->name, pci_name(pdev));
1687 goto out_pci_release_region;
1688 }
1689 } else {
1690 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1691 && !pci_set_consistent_dma_mask(pdev,
1692 DMA_BIT_MASK(32))) {
1693 ioc->dma_mask = DMA_BIT_MASK(32);
1694 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1695 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1696 ioc->name));
1697 } else {
1698 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1699 ioc->name, pci_name(pdev));
1700 goto out_pci_release_region;
1701 }
1702 }
1703
1704 mem_phys = msize = 0;
1705 port = psize = 0;
1706 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1707 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1708 if (psize)
1709 continue;
1710 /* Get I/O space! */
1711 port = pci_resource_start(pdev, ii);
1712 psize = pci_resource_len(pdev, ii);
1713 } else {
1714 if (msize)
1715 continue;
1716 /* Get memmap */
1717 mem_phys = pci_resource_start(pdev, ii);
1718 msize = pci_resource_len(pdev, ii);
1719 }
1720 }
1721 ioc->mem_size = msize;
1722
1723 mem = NULL;
1724 /* Get logical ptr for PciMem0 space */
1725 /*mem = ioremap(mem_phys, msize);*/
1726 mem = ioremap(mem_phys, msize);
1727 if (mem == NULL) {
1728 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1729 " memory!\n", ioc->name);
1730 r = -EINVAL;
1731 goto out_pci_release_region;
1732 }
1733 ioc->memmap = mem;
1734 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1735 ioc->name, mem, (unsigned long long)mem_phys));
1736
1737 ioc->mem_phys = mem_phys;
1738 ioc->chip = (SYSIF_REGS __iomem *)mem;
1739
1740 /* Save Port IO values in case we need to do downloadboot */
1741 ioc->pio_mem_phys = port;
1742 ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1743
1744 return 0;
1745
1746out_pci_release_region:
1747 pci_release_selected_regions(pdev, ioc->bars);
1748out_pci_disable_device:
1749 pci_disable_device(pdev);
1750 return r;
1751}
1752
1753/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1754/**
1755 * mpt_attach - Install a PCI intelligent MPT adapter.
1756 * @pdev: Pointer to pci_dev structure
1757 * @id: PCI device ID information
1758 *
1759 * This routine performs all the steps necessary to bring the IOC of
1760 * a MPT adapter to a OPERATIONAL state. This includes registering
1761 * memory regions, registering the interrupt, and allocating request
1762 * and reply memory pools.
1763 *
1764 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1765 * MPT adapter.
1766 *
1767 * Returns 0 for success, non-zero for failure.
1768 *
1769 * TODO: Add support for polled controllers
1770 */
1771int
1772mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1773{
1774 MPT_ADAPTER *ioc;
1775 u8 cb_idx;
1776 int r = -ENODEV;
1777 u8 pcixcmd;
1778 static int mpt_ids = 0;
1779#ifdef CONFIG_PROC_FS
1780 struct proc_dir_entry *dent;
1781#endif
1782
1783 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_KERNEL);
1784 if (ioc == NULL) {
1785 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1786 return -ENOMEM;
1787 }
1788
1789 ioc->id = mpt_ids++;
1790 sprintf(ioc->name, "ioc%d", ioc->id);
1791 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1792
1793 /*
1794 * set initial debug level
1795 * (refer to mptdebug.h)
1796 *
1797 */
1798 ioc->debug_level = mpt_debug_level;
1799 if (mpt_debug_level)
1800 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1801
1802 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1803
1804 ioc->pcidev = pdev;
1805 if (mpt_mapresources(ioc)) {
1806 goto out_free_ioc;
1807 }
1808
1809 /*
1810 * Setting up proper handlers for scatter gather handling
1811 */
1812 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1813 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1814 ioc->add_sge = &mpt_add_sge_64bit_1078;
1815 else
1816 ioc->add_sge = &mpt_add_sge_64bit;
1817 ioc->add_chain = &mpt_add_chain_64bit;
1818 ioc->sg_addr_size = 8;
1819 } else {
1820 ioc->add_sge = &mpt_add_sge;
1821 ioc->add_chain = &mpt_add_chain;
1822 ioc->sg_addr_size = 4;
1823 }
1824 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1825
1826 ioc->alloc_total = sizeof(MPT_ADAPTER);
1827 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1828 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1829
1830
1831 spin_lock_init(&ioc->taskmgmt_lock);
1832 mutex_init(&ioc->internal_cmds.mutex);
1833 init_completion(&ioc->internal_cmds.done);
1834 mutex_init(&ioc->mptbase_cmds.mutex);
1835 init_completion(&ioc->mptbase_cmds.done);
1836 mutex_init(&ioc->taskmgmt_cmds.mutex);
1837 init_completion(&ioc->taskmgmt_cmds.done);
1838
1839 /* Initialize the event logging.
1840 */
1841 ioc->eventTypes = 0; /* None */
1842 ioc->eventContext = 0;
1843 ioc->eventLogSize = 0;
1844 ioc->events = NULL;
1845
1846#ifdef MFCNT
1847 ioc->mfcnt = 0;
1848#endif
1849
1850 ioc->sh = NULL;
1851 ioc->cached_fw = NULL;
1852
1853 /* Initialize SCSI Config Data structure
1854 */
1855 memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1856
1857 /* Initialize the fc rport list head.
1858 */
1859 INIT_LIST_HEAD(&ioc->fc_rports);
1860
1861 /* Find lookup slot. */
1862 INIT_LIST_HEAD(&ioc->list);
1863
1864
1865 /* Initialize workqueue */
1866 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1867
1868 snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
1869 "mpt_poll_%d", ioc->id);
1870 ioc->reset_work_q = alloc_workqueue(ioc->reset_work_q_name,
1871 WQ_MEM_RECLAIM, 0);
1872 if (!ioc->reset_work_q) {
1873 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1874 ioc->name);
1875 r = -ENOMEM;
1876 goto out_unmap_resources;
1877 }
1878
1879 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1880 ioc->name, &ioc->facts, &ioc->pfacts[0]));
1881
1882 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device,
1883 pdev->revision);
1884
1885 switch (pdev->device)
1886 {
1887 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1888 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1889 ioc->errata_flag_1064 = 1;
1890 fallthrough;
1891 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1892 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1893 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1894 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1895 ioc->bus_type = FC;
1896 break;
1897
1898 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1899 if (pdev->revision < XL_929) {
1900 /* 929X Chip Fix. Set Split transactions level
1901 * for PCIX. Set MOST bits to zero.
1902 */
1903 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1904 pcixcmd &= 0x8F;
1905 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1906 } else {
1907 /* 929XL Chip Fix. Set MMRBC to 0x08.
1908 */
1909 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1910 pcixcmd |= 0x08;
1911 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1912 }
1913 ioc->bus_type = FC;
1914 break;
1915
1916 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1917 /* 919X Chip Fix. Set Split transactions level
1918 * for PCIX. Set MOST bits to zero.
1919 */
1920 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1921 pcixcmd &= 0x8F;
1922 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1923 ioc->bus_type = FC;
1924 break;
1925
1926 case MPI_MANUFACTPAGE_DEVID_53C1030:
1927 /* 1030 Chip Fix. Disable Split transactions
1928 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1929 */
1930 if (pdev->revision < C0_1030) {
1931 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1932 pcixcmd &= 0x8F;
1933 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1934 }
1935 fallthrough;
1936
1937 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1938 ioc->bus_type = SPI;
1939 break;
1940
1941 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1942 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1943 ioc->errata_flag_1064 = 1;
1944 ioc->bus_type = SAS;
1945 break;
1946
1947 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1948 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1949 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1950 ioc->bus_type = SAS;
1951 break;
1952 }
1953
1954
1955 switch (ioc->bus_type) {
1956
1957 case SAS:
1958 ioc->msi_enable = mpt_msi_enable_sas;
1959 break;
1960
1961 case SPI:
1962 ioc->msi_enable = mpt_msi_enable_spi;
1963 break;
1964
1965 case FC:
1966 ioc->msi_enable = mpt_msi_enable_fc;
1967 break;
1968
1969 default:
1970 ioc->msi_enable = 0;
1971 break;
1972 }
1973
1974 ioc->fw_events_off = 1;
1975
1976 if (ioc->errata_flag_1064)
1977 pci_disable_io_access(pdev);
1978
1979 spin_lock_init(&ioc->FreeQlock);
1980
1981 /* Disable all! */
1982 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1983 ioc->active = 0;
1984 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1985
1986 /* Set IOC ptr in the pcidev's driver data. */
1987 pci_set_drvdata(ioc->pcidev, ioc);
1988
1989 /* Set lookup ptr. */
1990 list_add_tail(&ioc->list, &ioc_list);
1991
1992 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1993 */
1994 mpt_detect_bound_ports(ioc, pdev);
1995
1996 INIT_LIST_HEAD(&ioc->fw_event_list);
1997 spin_lock_init(&ioc->fw_event_lock);
1998 snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
1999 ioc->fw_event_q = alloc_workqueue(ioc->fw_event_q_name,
2000 WQ_MEM_RECLAIM, 0);
2001 if (!ioc->fw_event_q) {
2002 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
2003 ioc->name);
2004 r = -ENOMEM;
2005 goto out_remove_ioc;
2006 }
2007
2008 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2009 CAN_SLEEP)) != 0){
2010 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
2011 ioc->name, r);
2012
2013 destroy_workqueue(ioc->fw_event_q);
2014 ioc->fw_event_q = NULL;
2015
2016 list_del(&ioc->list);
2017 if (ioc->alt_ioc)
2018 ioc->alt_ioc->alt_ioc = NULL;
2019 iounmap(ioc->memmap);
2020 if (pci_is_enabled(pdev))
2021 pci_disable_device(pdev);
2022 if (r != -5)
2023 pci_release_selected_regions(pdev, ioc->bars);
2024
2025 destroy_workqueue(ioc->reset_work_q);
2026 ioc->reset_work_q = NULL;
2027
2028 kfree(ioc);
2029 return r;
2030 }
2031
2032 /* call per device driver probe entry point */
2033 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2034 if(MptDeviceDriverHandlers[cb_idx] &&
2035 MptDeviceDriverHandlers[cb_idx]->probe) {
2036 MptDeviceDriverHandlers[cb_idx]->probe(pdev,id);
2037 }
2038 }
2039
2040#ifdef CONFIG_PROC_FS
2041 /*
2042 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2043 */
2044 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2045 if (dent) {
2046 proc_create_single_data("info", S_IRUGO, dent,
2047 mpt_iocinfo_proc_show, ioc);
2048 proc_create_single_data("summary", S_IRUGO, dent,
2049 mpt_summary_proc_show, ioc);
2050 }
2051#endif
2052
2053 if (!ioc->alt_ioc)
2054 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2055 msecs_to_jiffies(MPT_POLLING_INTERVAL));
2056
2057 return 0;
2058
2059out_remove_ioc:
2060 list_del(&ioc->list);
2061 if (ioc->alt_ioc)
2062 ioc->alt_ioc->alt_ioc = NULL;
2063
2064 destroy_workqueue(ioc->reset_work_q);
2065 ioc->reset_work_q = NULL;
2066
2067out_unmap_resources:
2068 iounmap(ioc->memmap);
2069 pci_disable_device(pdev);
2070 pci_release_selected_regions(pdev, ioc->bars);
2071
2072out_free_ioc:
2073 kfree(ioc);
2074
2075 return r;
2076}
2077
2078/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2079/**
2080 * mpt_detach - Remove a PCI intelligent MPT adapter.
2081 * @pdev: Pointer to pci_dev structure
2082 */
2083
2084void
2085mpt_detach(struct pci_dev *pdev)
2086{
2087 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2088 char pname[64];
2089 u8 cb_idx;
2090 unsigned long flags;
2091 struct workqueue_struct *wq;
2092
2093 /*
2094 * Stop polling ioc for fault condition
2095 */
2096 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2097 wq = ioc->reset_work_q;
2098 ioc->reset_work_q = NULL;
2099 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2100 cancel_delayed_work(&ioc->fault_reset_work);
2101 destroy_workqueue(wq);
2102
2103 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2104 wq = ioc->fw_event_q;
2105 ioc->fw_event_q = NULL;
2106 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2107 destroy_workqueue(wq);
2108
2109 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2110 remove_proc_entry(pname, NULL);
2111 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2112 remove_proc_entry(pname, NULL);
2113 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2114 remove_proc_entry(pname, NULL);
2115
2116 /* call per device driver remove entry point */
2117 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2118 if(MptDeviceDriverHandlers[cb_idx] &&
2119 MptDeviceDriverHandlers[cb_idx]->remove) {
2120 MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2121 }
2122 }
2123
2124 /* Disable interrupts! */
2125 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2126
2127 ioc->active = 0;
2128 synchronize_irq(pdev->irq);
2129
2130 /* Clear any lingering interrupt */
2131 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2132
2133 CHIPREG_READ32(&ioc->chip->IntStatus);
2134
2135 mpt_adapter_dispose(ioc);
2136
2137}
2138
2139/**************************************************************************
2140 * Power Management
2141 */
2142#ifdef CONFIG_PM
2143/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2144/**
2145 * mpt_suspend - Fusion MPT base driver suspend routine.
2146 * @pdev: Pointer to pci_dev structure
2147 * @state: new state to enter
2148 */
2149int
2150mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2151{
2152 u32 device_state;
2153 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2154
2155 device_state = pci_choose_state(pdev, state);
2156 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2157 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2158 device_state);
2159
2160 /* put ioc into READY_STATE */
2161 if (SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2162 printk(MYIOC_s_ERR_FMT
2163 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
2164 }
2165
2166 /* disable interrupts */
2167 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2168 ioc->active = 0;
2169
2170 /* Clear any lingering interrupt */
2171 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2172
2173 free_irq(ioc->pci_irq, ioc);
2174 if (ioc->msi_enable)
2175 pci_disable_msi(ioc->pcidev);
2176 ioc->pci_irq = -1;
2177 pci_save_state(pdev);
2178 pci_disable_device(pdev);
2179 pci_release_selected_regions(pdev, ioc->bars);
2180 pci_set_power_state(pdev, device_state);
2181 return 0;
2182}
2183
2184/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2185/**
2186 * mpt_resume - Fusion MPT base driver resume routine.
2187 * @pdev: Pointer to pci_dev structure
2188 */
2189int
2190mpt_resume(struct pci_dev *pdev)
2191{
2192 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2193 u32 device_state = pdev->current_state;
2194 int recovery_state;
2195 int err;
2196
2197 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2198 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2199 device_state);
2200
2201 pci_set_power_state(pdev, PCI_D0);
2202 pci_enable_wake(pdev, PCI_D0, 0);
2203 pci_restore_state(pdev);
2204 ioc->pcidev = pdev;
2205 err = mpt_mapresources(ioc);
2206 if (err)
2207 return err;
2208
2209 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2210 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2211 ioc->add_sge = &mpt_add_sge_64bit_1078;
2212 else
2213 ioc->add_sge = &mpt_add_sge_64bit;
2214 ioc->add_chain = &mpt_add_chain_64bit;
2215 ioc->sg_addr_size = 8;
2216 } else {
2217
2218 ioc->add_sge = &mpt_add_sge;
2219 ioc->add_chain = &mpt_add_chain;
2220 ioc->sg_addr_size = 4;
2221 }
2222 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2223
2224 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2225 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2226 CHIPREG_READ32(&ioc->chip->Doorbell));
2227
2228 /*
2229 * Errata workaround for SAS pci express:
2230 * Upon returning to the D0 state, the contents of the doorbell will be
2231 * stale data, and this will incorrectly signal to the host driver that
2232 * the firmware is ready to process mpt commands. The workaround is
2233 * to issue a diagnostic reset.
2234 */
2235 if (ioc->bus_type == SAS && (pdev->device ==
2236 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2237 MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2238 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2239 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2240 ioc->name);
2241 goto out;
2242 }
2243 }
2244
2245 /* bring ioc to operational state */
2246 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2247 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2248 CAN_SLEEP);
2249 if (recovery_state != 0)
2250 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2251 "error:[%x]\n", ioc->name, recovery_state);
2252 else
2253 printk(MYIOC_s_INFO_FMT
2254 "pci-resume: success\n", ioc->name);
2255 out:
2256 return 0;
2257
2258}
2259#endif
2260
2261static int
2262mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2263{
2264 if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2265 ioc->bus_type != SPI) ||
2266 (MptDriverClass[index] == MPTFC_DRIVER &&
2267 ioc->bus_type != FC) ||
2268 (MptDriverClass[index] == MPTSAS_DRIVER &&
2269 ioc->bus_type != SAS))
2270 /* make sure we only call the relevant reset handler
2271 * for the bus */
2272 return 0;
2273 return (MptResetHandlers[index])(ioc, reset_phase);
2274}
2275
2276/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2277/**
2278 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2279 * @ioc: Pointer to MPT adapter structure
2280 * @reason: Event word / reason
2281 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2282 *
2283 * This routine performs all the steps necessary to bring the IOC
2284 * to a OPERATIONAL state.
2285 *
2286 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
2287 * MPT adapter.
2288 *
2289 * Returns:
2290 * 0 for success
2291 * -1 if failed to get board READY
2292 * -2 if READY but IOCFacts Failed
2293 * -3 if READY but PrimeIOCFifos Failed
2294 * -4 if READY but IOCInit Failed
2295 * -5 if failed to enable_device and/or request_selected_regions
2296 * -6 if failed to upload firmware
2297 */
2298static int
2299mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2300{
2301 int hard_reset_done = 0;
2302 int alt_ioc_ready = 0;
2303 int hard;
2304 int rc=0;
2305 int ii;
2306 int ret = 0;
2307 int reset_alt_ioc_active = 0;
2308 int irq_allocated = 0;
2309 u8 *a;
2310
2311 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2312 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2313
2314 /* Disable reply interrupts (also blocks FreeQ) */
2315 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2316 ioc->active = 0;
2317
2318 if (ioc->alt_ioc) {
2319 if (ioc->alt_ioc->active ||
2320 reason == MPT_HOSTEVENT_IOC_RECOVER) {
2321 reset_alt_ioc_active = 1;
2322 /* Disable alt-IOC's reply interrupts
2323 * (and FreeQ) for a bit
2324 **/
2325 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2326 0xFFFFFFFF);
2327 ioc->alt_ioc->active = 0;
2328 }
2329 }
2330
2331 hard = 1;
2332 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2333 hard = 0;
2334
2335 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2336 if (hard_reset_done == -4) {
2337 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2338 ioc->name);
2339
2340 if (reset_alt_ioc_active && ioc->alt_ioc) {
2341 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2342 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2343 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2344 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2345 ioc->alt_ioc->active = 1;
2346 }
2347
2348 } else {
2349 printk(MYIOC_s_WARN_FMT
2350 "NOT READY WARNING!\n", ioc->name);
2351 }
2352 ret = -1;
2353 goto out;
2354 }
2355
2356 /* hard_reset_done = 0 if a soft reset was performed
2357 * and 1 if a hard reset was performed.
2358 */
2359 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2360 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2361 alt_ioc_ready = 1;
2362 else
2363 printk(MYIOC_s_WARN_FMT
2364 ": alt-ioc Not ready WARNING!\n",
2365 ioc->alt_ioc->name);
2366 }
2367
2368 for (ii=0; ii<5; ii++) {
2369 /* Get IOC facts! Allow 5 retries */
2370 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2371 break;
2372 }
2373
2374
2375 if (ii == 5) {
2376 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2377 "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2378 ret = -2;
2379 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2380 MptDisplayIocCapabilities(ioc);
2381 }
2382
2383 if (alt_ioc_ready) {
2384 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2385 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2386 "Initial Alt IocFacts failed rc=%x\n",
2387 ioc->name, rc));
2388 /* Retry - alt IOC was initialized once
2389 */
2390 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2391 }
2392 if (rc) {
2393 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2394 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2395 alt_ioc_ready = 0;
2396 reset_alt_ioc_active = 0;
2397 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2398 MptDisplayIocCapabilities(ioc->alt_ioc);
2399 }
2400 }
2401
2402 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2403 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2404 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2405 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2406 IORESOURCE_IO);
2407 if (pci_enable_device(ioc->pcidev))
2408 return -5;
2409 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2410 "mpt"))
2411 return -5;
2412 }
2413
2414 /*
2415 * Device is reset now. It must have de-asserted the interrupt line
2416 * (if it was asserted) and it should be safe to register for the
2417 * interrupt now.
2418 */
2419 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2420 ioc->pci_irq = -1;
2421 if (ioc->pcidev->irq) {
2422 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2423 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2424 ioc->name);
2425 else
2426 ioc->msi_enable = 0;
2427 rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2428 IRQF_SHARED, ioc->name, ioc);
2429 if (rc < 0) {
2430 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2431 "interrupt %d!\n",
2432 ioc->name, ioc->pcidev->irq);
2433 if (ioc->msi_enable)
2434 pci_disable_msi(ioc->pcidev);
2435 ret = -EBUSY;
2436 goto out;
2437 }
2438 irq_allocated = 1;
2439 ioc->pci_irq = ioc->pcidev->irq;
2440 pci_set_master(ioc->pcidev); /* ?? */
2441 pci_set_drvdata(ioc->pcidev, ioc);
2442 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2443 "installed at interrupt %d\n", ioc->name,
2444 ioc->pcidev->irq));
2445 }
2446 }
2447
2448 /* Prime reply & request queues!
2449 * (mucho alloc's) Must be done prior to
2450 * init as upper addresses are needed for init.
2451 * If fails, continue with alt-ioc processing
2452 */
2453 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2454 ioc->name));
2455 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2456 ret = -3;
2457
2458 /* May need to check/upload firmware & data here!
2459 * If fails, continue with alt-ioc processing
2460 */
2461 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2462 ioc->name));
2463 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2464 ret = -4;
2465// NEW!
2466 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2467 printk(MYIOC_s_WARN_FMT
2468 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2469 ioc->alt_ioc->name, rc);
2470 alt_ioc_ready = 0;
2471 reset_alt_ioc_active = 0;
2472 }
2473
2474 if (alt_ioc_ready) {
2475 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2476 alt_ioc_ready = 0;
2477 reset_alt_ioc_active = 0;
2478 printk(MYIOC_s_WARN_FMT
2479 ": alt-ioc: (%d) init failure WARNING!\n",
2480 ioc->alt_ioc->name, rc);
2481 }
2482 }
2483
2484 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2485 if (ioc->upload_fw) {
2486 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2487 "firmware upload required!\n", ioc->name));
2488
2489 /* Controller is not operational, cannot do upload
2490 */
2491 if (ret == 0) {
2492 rc = mpt_do_upload(ioc, sleepFlag);
2493 if (rc == 0) {
2494 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2495 /*
2496 * Maintain only one pointer to FW memory
2497 * so there will not be two attempt to
2498 * downloadboot onboard dual function
2499 * chips (mpt_adapter_disable,
2500 * mpt_diag_reset)
2501 */
2502 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2503 "mpt_upload: alt_%s has cached_fw=%p \n",
2504 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2505 ioc->cached_fw = NULL;
2506 }
2507 } else {
2508 printk(MYIOC_s_WARN_FMT
2509 "firmware upload failure!\n", ioc->name);
2510 ret = -6;
2511 }
2512 }
2513 }
2514 }
2515
2516 /* Enable MPT base driver management of EventNotification
2517 * and EventAck handling.
2518 */
2519 if ((ret == 0) && (!ioc->facts.EventState)) {
2520 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2521 "SendEventNotification\n",
2522 ioc->name));
2523 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2524 }
2525
2526 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2527 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2528
2529 if (ret == 0) {
2530 /* Enable! (reply interrupt) */
2531 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2532 ioc->active = 1;
2533 }
2534 if (rc == 0) { /* alt ioc */
2535 if (reset_alt_ioc_active && ioc->alt_ioc) {
2536 /* (re)Enable alt-IOC! (reply interrupt) */
2537 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2538 "reply irq re-enabled\n",
2539 ioc->alt_ioc->name));
2540 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2541 MPI_HIM_DIM);
2542 ioc->alt_ioc->active = 1;
2543 }
2544 }
2545
2546
2547 /* Add additional "reason" check before call to GetLanConfigPages
2548 * (combined with GetIoUnitPage2 call). This prevents a somewhat
2549 * recursive scenario; GetLanConfigPages times out, timer expired
2550 * routine calls HardResetHandler, which calls into here again,
2551 * and we try GetLanConfigPages again...
2552 */
2553 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2554
2555 /*
2556 * Initialize link list for inactive raid volumes.
2557 */
2558 mutex_init(&ioc->raid_data.inactive_list_mutex);
2559 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2560
2561 switch (ioc->bus_type) {
2562
2563 case SAS:
2564 /* clear persistency table */
2565 if(ioc->facts.IOCExceptions &
2566 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2567 ret = mptbase_sas_persist_operation(ioc,
2568 MPI_SAS_OP_CLEAR_NOT_PRESENT);
2569 if(ret != 0)
2570 goto out;
2571 }
2572
2573 /* Find IM volumes
2574 */
2575 mpt_findImVolumes(ioc);
2576
2577 /* Check, and possibly reset, the coalescing value
2578 */
2579 mpt_read_ioc_pg_1(ioc);
2580
2581 break;
2582
2583 case FC:
2584 if ((ioc->pfacts[0].ProtocolFlags &
2585 MPI_PORTFACTS_PROTOCOL_LAN) &&
2586 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2587 /*
2588 * Pre-fetch the ports LAN MAC address!
2589 * (LANPage1_t stuff)
2590 */
2591 (void) GetLanConfigPages(ioc);
2592 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2593 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2594 "LanAddr = %pMR\n", ioc->name, a));
2595 }
2596 break;
2597
2598 case SPI:
2599 /* Get NVRAM and adapter maximums from SPP 0 and 2
2600 */
2601 mpt_GetScsiPortSettings(ioc, 0);
2602
2603 /* Get version and length of SDP 1
2604 */
2605 mpt_readScsiDevicePageHeaders(ioc, 0);
2606
2607 /* Find IM volumes
2608 */
2609 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2610 mpt_findImVolumes(ioc);
2611
2612 /* Check, and possibly reset, the coalescing value
2613 */
2614 mpt_read_ioc_pg_1(ioc);
2615
2616 mpt_read_ioc_pg_4(ioc);
2617
2618 break;
2619 }
2620
2621 GetIoUnitPage2(ioc);
2622 mpt_get_manufacturing_pg_0(ioc);
2623 }
2624
2625 out:
2626 if ((ret != 0) && irq_allocated) {
2627 free_irq(ioc->pci_irq, ioc);
2628 if (ioc->msi_enable)
2629 pci_disable_msi(ioc->pcidev);
2630 }
2631 return ret;
2632}
2633
2634/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2635/**
2636 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2637 * @ioc: Pointer to MPT adapter structure
2638 * @pdev: Pointer to (struct pci_dev) structure
2639 *
2640 * Search for PCI bus/dev_function which matches
2641 * PCI bus/dev_function (+/-1) for newly discovered 929,
2642 * 929X, 1030 or 1035.
2643 *
2644 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2645 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2646 */
2647static void
2648mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2649{
2650 struct pci_dev *peer=NULL;
2651 unsigned int slot = PCI_SLOT(pdev->devfn);
2652 unsigned int func = PCI_FUNC(pdev->devfn);
2653 MPT_ADAPTER *ioc_srch;
2654
2655 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2656 " searching for devfn match on %x or %x\n",
2657 ioc->name, pci_name(pdev), pdev->bus->number,
2658 pdev->devfn, func-1, func+1));
2659
2660 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2661 if (!peer) {
2662 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2663 if (!peer)
2664 return;
2665 }
2666
2667 list_for_each_entry(ioc_srch, &ioc_list, list) {
2668 struct pci_dev *_pcidev = ioc_srch->pcidev;
2669 if (_pcidev == peer) {
2670 /* Paranoia checks */
2671 if (ioc->alt_ioc != NULL) {
2672 printk(MYIOC_s_WARN_FMT
2673 "Oops, already bound (%s <==> %s)!\n",
2674 ioc->name, ioc->name, ioc->alt_ioc->name);
2675 break;
2676 } else if (ioc_srch->alt_ioc != NULL) {
2677 printk(MYIOC_s_WARN_FMT
2678 "Oops, already bound (%s <==> %s)!\n",
2679 ioc_srch->name, ioc_srch->name,
2680 ioc_srch->alt_ioc->name);
2681 break;
2682 }
2683 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2684 "FOUND! binding %s <==> %s\n",
2685 ioc->name, ioc->name, ioc_srch->name));
2686 ioc_srch->alt_ioc = ioc;
2687 ioc->alt_ioc = ioc_srch;
2688 }
2689 }
2690 pci_dev_put(peer);
2691}
2692
2693/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2694/**
2695 * mpt_adapter_disable - Disable misbehaving MPT adapter.
2696 * @ioc: Pointer to MPT adapter structure
2697 */
2698static void
2699mpt_adapter_disable(MPT_ADAPTER *ioc)
2700{
2701 int sz;
2702 int ret;
2703
2704 if (ioc->cached_fw != NULL) {
2705 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2706 "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2707 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2708 ioc->cached_fw, CAN_SLEEP)) < 0) {
2709 printk(MYIOC_s_WARN_FMT
2710 ": firmware downloadboot failure (%d)!\n",
2711 ioc->name, ret);
2712 }
2713 }
2714
2715 /*
2716 * Put the controller into ready state (if its not already)
2717 */
2718 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2719 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2720 CAN_SLEEP)) {
2721 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2722 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
2723 "reset failed to put ioc in ready state!\n",
2724 ioc->name, __func__);
2725 } else
2726 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
2727 "failed!\n", ioc->name, __func__);
2728 }
2729
2730
2731 /* Disable adapter interrupts! */
2732 synchronize_irq(ioc->pcidev->irq);
2733 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2734 ioc->active = 0;
2735
2736 /* Clear any lingering interrupt */
2737 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2738 CHIPREG_READ32(&ioc->chip->IntStatus);
2739
2740 if (ioc->alloc != NULL) {
2741 sz = ioc->alloc_sz;
2742 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
2743 ioc->name, ioc->alloc, ioc->alloc_sz));
2744 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc,
2745 ioc->alloc_dma);
2746 ioc->reply_frames = NULL;
2747 ioc->req_frames = NULL;
2748 ioc->alloc = NULL;
2749 ioc->alloc_total -= sz;
2750 }
2751
2752 if (ioc->sense_buf_pool != NULL) {
2753 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2754 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool,
2755 ioc->sense_buf_pool_dma);
2756 ioc->sense_buf_pool = NULL;
2757 ioc->alloc_total -= sz;
2758 }
2759
2760 if (ioc->events != NULL){
2761 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2762 kfree(ioc->events);
2763 ioc->events = NULL;
2764 ioc->alloc_total -= sz;
2765 }
2766
2767 mpt_free_fw_memory(ioc);
2768
2769 kfree(ioc->spi_data.nvram);
2770 mpt_inactive_raid_list_free(ioc);
2771 kfree(ioc->raid_data.pIocPg2);
2772 kfree(ioc->raid_data.pIocPg3);
2773 ioc->spi_data.nvram = NULL;
2774 ioc->raid_data.pIocPg3 = NULL;
2775
2776 if (ioc->spi_data.pIocPg4 != NULL) {
2777 sz = ioc->spi_data.IocPg4Sz;
2778 pci_free_consistent(ioc->pcidev, sz,
2779 ioc->spi_data.pIocPg4,
2780 ioc->spi_data.IocPg4_dma);
2781 ioc->spi_data.pIocPg4 = NULL;
2782 ioc->alloc_total -= sz;
2783 }
2784
2785 if (ioc->ReqToChain != NULL) {
2786 kfree(ioc->ReqToChain);
2787 kfree(ioc->RequestNB);
2788 ioc->ReqToChain = NULL;
2789 }
2790
2791 kfree(ioc->ChainToChain);
2792 ioc->ChainToChain = NULL;
2793
2794 if (ioc->HostPageBuffer != NULL) {
2795 if((ret = mpt_host_page_access_control(ioc,
2796 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2797 printk(MYIOC_s_ERR_FMT
2798 ": %s: host page buffers free failed (%d)!\n",
2799 ioc->name, __func__, ret);
2800 }
2801 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2802 "HostPageBuffer free @ %p, sz=%d bytes\n",
2803 ioc->name, ioc->HostPageBuffer,
2804 ioc->HostPageBuffer_sz));
2805 dma_free_coherent(&ioc->pcidev->dev, ioc->HostPageBuffer_sz,
2806 ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2807 ioc->HostPageBuffer = NULL;
2808 ioc->HostPageBuffer_sz = 0;
2809 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2810 }
2811
2812 pci_set_drvdata(ioc->pcidev, NULL);
2813}
2814/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2815/**
2816 * mpt_adapter_dispose - Free all resources associated with an MPT adapter
2817 * @ioc: Pointer to MPT adapter structure
2818 *
2819 * This routine unregisters h/w resources and frees all alloc'd memory
2820 * associated with a MPT adapter structure.
2821 */
2822static void
2823mpt_adapter_dispose(MPT_ADAPTER *ioc)
2824{
2825 int sz_first, sz_last;
2826
2827 if (ioc == NULL)
2828 return;
2829
2830 sz_first = ioc->alloc_total;
2831
2832 mpt_adapter_disable(ioc);
2833
2834 if (ioc->pci_irq != -1) {
2835 free_irq(ioc->pci_irq, ioc);
2836 if (ioc->msi_enable)
2837 pci_disable_msi(ioc->pcidev);
2838 ioc->pci_irq = -1;
2839 }
2840
2841 if (ioc->memmap != NULL) {
2842 iounmap(ioc->memmap);
2843 ioc->memmap = NULL;
2844 }
2845
2846 pci_disable_device(ioc->pcidev);
2847 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2848
2849 /* Zap the adapter lookup ptr! */
2850 list_del(&ioc->list);
2851
2852 sz_last = ioc->alloc_total;
2853 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2854 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2855
2856 if (ioc->alt_ioc)
2857 ioc->alt_ioc->alt_ioc = NULL;
2858
2859 kfree(ioc);
2860}
2861
2862/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2863/**
2864 * MptDisplayIocCapabilities - Disply IOC's capabilities.
2865 * @ioc: Pointer to MPT adapter structure
2866 */
2867static void
2868MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2869{
2870 int i = 0;
2871
2872 printk(KERN_INFO "%s: ", ioc->name);
2873 if (ioc->prod_name)
2874 pr_cont("%s: ", ioc->prod_name);
2875 pr_cont("Capabilities={");
2876
2877 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2878 pr_cont("Initiator");
2879 i++;
2880 }
2881
2882 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2883 pr_cont("%sTarget", i ? "," : "");
2884 i++;
2885 }
2886
2887 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2888 pr_cont("%sLAN", i ? "," : "");
2889 i++;
2890 }
2891
2892#if 0
2893 /*
2894 * This would probably evoke more questions than it's worth
2895 */
2896 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2897 pr_cont("%sLogBusAddr", i ? "," : "");
2898 i++;
2899 }
2900#endif
2901
2902 pr_cont("}\n");
2903}
2904
2905/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2906/**
2907 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2908 * @ioc: Pointer to MPT_ADAPTER structure
2909 * @force: Force hard KickStart of IOC
2910 * @sleepFlag: Specifies whether the process can sleep
2911 *
2912 * Returns:
2913 * 1 - DIAG reset and READY
2914 * 0 - READY initially OR soft reset and READY
2915 * -1 - Any failure on KickStart
2916 * -2 - Msg Unit Reset Failed
2917 * -3 - IO Unit Reset Failed
2918 * -4 - IOC owned by a PEER
2919 */
2920static int
2921MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2922{
2923 u32 ioc_state;
2924 int statefault = 0;
2925 int cntdn;
2926 int hard_reset_done = 0;
2927 int r;
2928 int ii;
2929 int whoinit;
2930
2931 /* Get current [raw] IOC state */
2932 ioc_state = mpt_GetIocState(ioc, 0);
2933 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2934
2935 /*
2936 * Check to see if IOC got left/stuck in doorbell handshake
2937 * grip of death. If so, hard reset the IOC.
2938 */
2939 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2940 statefault = 1;
2941 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2942 ioc->name);
2943 }
2944
2945 /* Is it already READY? */
2946 if (!statefault &&
2947 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2948 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2949 "IOC is in READY state\n", ioc->name));
2950 return 0;
2951 }
2952
2953 /*
2954 * Check to see if IOC is in FAULT state.
2955 */
2956 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2957 statefault = 2;
2958 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2959 ioc->name);
2960 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
2961 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2962 }
2963
2964 /*
2965 * Hmmm... Did it get left operational?
2966 */
2967 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2968 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2969 ioc->name));
2970
2971 /* Check WhoInit.
2972 * If PCI Peer, exit.
2973 * Else, if no fault conditions are present, issue a MessageUnitReset
2974 * Else, fall through to KickStart case
2975 */
2976 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2977 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2978 "whoinit 0x%x statefault %d force %d\n",
2979 ioc->name, whoinit, statefault, force));
2980 if (whoinit == MPI_WHOINIT_PCI_PEER)
2981 return -4;
2982 else {
2983 if ((statefault == 0 ) && (force == 0)) {
2984 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2985 return 0;
2986 }
2987 statefault = 3;
2988 }
2989 }
2990
2991 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2992 if (hard_reset_done < 0)
2993 return -1;
2994
2995 /*
2996 * Loop here waiting for IOC to come READY.
2997 */
2998 ii = 0;
2999 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
3000
3001 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
3002 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
3003 /*
3004 * BIOS or previous driver load left IOC in OP state.
3005 * Reset messaging FIFOs.
3006 */
3007 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
3008 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
3009 return -2;
3010 }
3011 } else if (ioc_state == MPI_IOC_STATE_RESET) {
3012 /*
3013 * Something is wrong. Try to get IOC back
3014 * to a known state.
3015 */
3016 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3017 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3018 return -3;
3019 }
3020 }
3021
3022 ii++; cntdn--;
3023 if (!cntdn) {
3024 printk(MYIOC_s_ERR_FMT
3025 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3026 ioc->name, ioc_state, (int)((ii+5)/HZ));
3027 return -ETIME;
3028 }
3029
3030 if (sleepFlag == CAN_SLEEP) {
3031 msleep(1);
3032 } else {
3033 mdelay (1); /* 1 msec delay */
3034 }
3035
3036 }
3037
3038 if (statefault < 3) {
3039 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3040 statefault == 1 ? "stuck handshake" : "IOC FAULT");
3041 }
3042
3043 return hard_reset_done;
3044}
3045
3046/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3047/**
3048 * mpt_GetIocState - Get the current state of a MPT adapter.
3049 * @ioc: Pointer to MPT_ADAPTER structure
3050 * @cooked: Request raw or cooked IOC state
3051 *
3052 * Returns all IOC Doorbell register bits if cooked==0, else just the
3053 * Doorbell bits in MPI_IOC_STATE_MASK.
3054 */
3055u32
3056mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3057{
3058 u32 s, sc;
3059
3060 /* Get! */
3061 s = CHIPREG_READ32(&ioc->chip->Doorbell);
3062 sc = s & MPI_IOC_STATE_MASK;
3063
3064 /* Save! */
3065 ioc->last_state = sc;
3066
3067 return cooked ? sc : s;
3068}
3069
3070/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3071/**
3072 * GetIocFacts - Send IOCFacts request to MPT adapter.
3073 * @ioc: Pointer to MPT_ADAPTER structure
3074 * @sleepFlag: Specifies whether the process can sleep
3075 * @reason: If recovery, only update facts.
3076 *
3077 * Returns 0 for success, non-zero for failure.
3078 */
3079static int
3080GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3081{
3082 IOCFacts_t get_facts;
3083 IOCFactsReply_t *facts;
3084 int r;
3085 int req_sz;
3086 int reply_sz;
3087 int sz;
3088 u32 status, vv;
3089 u8 shiftFactor=1;
3090
3091 /* IOC *must* NOT be in RESET state! */
3092 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3093 printk(KERN_ERR MYNAM
3094 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3095 ioc->name, ioc->last_state);
3096 return -44;
3097 }
3098
3099 facts = &ioc->facts;
3100
3101 /* Destination (reply area)... */
3102 reply_sz = sizeof(*facts);
3103 memset(facts, 0, reply_sz);
3104
3105 /* Request area (get_facts on the stack right now!) */
3106 req_sz = sizeof(get_facts);
3107 memset(&get_facts, 0, req_sz);
3108
3109 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3110 /* Assert: All other get_facts fields are zero! */
3111
3112 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3113 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3114 ioc->name, req_sz, reply_sz));
3115
3116 /* No non-zero fields in the get_facts request are greater than
3117 * 1 byte in size, so we can just fire it off as is.
3118 */
3119 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3120 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3121 if (r != 0)
3122 return r;
3123
3124 /*
3125 * Now byte swap (GRRR) the necessary fields before any further
3126 * inspection of reply contents.
3127 *
3128 * But need to do some sanity checks on MsgLength (byte) field
3129 * to make sure we don't zero IOC's req_sz!
3130 */
3131 /* Did we get a valid reply? */
3132 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3133 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3134 /*
3135 * If not been here, done that, save off first WhoInit value
3136 */
3137 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3138 ioc->FirstWhoInit = facts->WhoInit;
3139 }
3140
3141 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3142 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3143 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3144 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3145 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3146 status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
3147 /* CHECKME! IOCStatus, IOCLogInfo */
3148
3149 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3150 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3151
3152 /*
3153 * FC f/w version changed between 1.1 and 1.2
3154 * Old: u16{Major(4),Minor(4),SubMinor(8)}
3155 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3156 */
3157 if (facts->MsgVersion < MPI_VERSION_01_02) {
3158 /*
3159 * Handle old FC f/w style, convert to new...
3160 */
3161 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3162 facts->FWVersion.Word =
3163 ((oldv<<12) & 0xFF000000) |
3164 ((oldv<<8) & 0x000FFF00);
3165 } else
3166 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3167
3168 facts->ProductID = le16_to_cpu(facts->ProductID);
3169
3170 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3171 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3172 ioc->ir_firmware = 1;
3173
3174 facts->CurrentHostMfaHighAddr =
3175 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3176 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3177 facts->CurrentSenseBufferHighAddr =
3178 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3179 facts->CurReplyFrameSize =
3180 le16_to_cpu(facts->CurReplyFrameSize);
3181 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3182
3183 /*
3184 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3185 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3186 * to 14 in MPI-1.01.0x.
3187 */
3188 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3189 facts->MsgVersion > MPI_VERSION_01_00) {
3190 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3191 }
3192
3193 facts->FWImageSize = ALIGN(facts->FWImageSize, 4);
3194
3195 if (!facts->RequestFrameSize) {
3196 /* Something is wrong! */
3197 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3198 ioc->name);
3199 return -55;
3200 }
3201
3202 r = sz = facts->BlockSize;
3203 vv = ((63 / (sz * 4)) + 1) & 0x03;
3204 ioc->NB_for_64_byte_frame = vv;
3205 while ( sz )
3206 {
3207 shiftFactor++;
3208 sz = sz >> 1;
3209 }
3210 ioc->NBShiftFactor = shiftFactor;
3211 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3212 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3213 ioc->name, vv, shiftFactor, r));
3214
3215 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3216 /*
3217 * Set values for this IOC's request & reply frame sizes,
3218 * and request & reply queue depths...
3219 */
3220 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3221 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3222 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3223 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3224
3225 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3226 ioc->name, ioc->reply_sz, ioc->reply_depth));
3227 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
3228 ioc->name, ioc->req_sz, ioc->req_depth));
3229
3230 /* Get port facts! */
3231 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3232 return r;
3233 }
3234 } else {
3235 printk(MYIOC_s_ERR_FMT
3236 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3237 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3238 RequestFrameSize)/sizeof(u32)));
3239 return -66;
3240 }
3241
3242 return 0;
3243}
3244
3245/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3246/**
3247 * GetPortFacts - Send PortFacts request to MPT adapter.
3248 * @ioc: Pointer to MPT_ADAPTER structure
3249 * @portnum: Port number
3250 * @sleepFlag: Specifies whether the process can sleep
3251 *
3252 * Returns 0 for success, non-zero for failure.
3253 */
3254static int
3255GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3256{
3257 PortFacts_t get_pfacts;
3258 PortFactsReply_t *pfacts;
3259 int ii;
3260 int req_sz;
3261 int reply_sz;
3262 int max_id;
3263
3264 /* IOC *must* NOT be in RESET state! */
3265 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3266 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3267 ioc->name, ioc->last_state );
3268 return -4;
3269 }
3270
3271 pfacts = &ioc->pfacts[portnum];
3272
3273 /* Destination (reply area)... */
3274 reply_sz = sizeof(*pfacts);
3275 memset(pfacts, 0, reply_sz);
3276
3277 /* Request area (get_pfacts on the stack right now!) */
3278 req_sz = sizeof(get_pfacts);
3279 memset(&get_pfacts, 0, req_sz);
3280
3281 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3282 get_pfacts.PortNumber = portnum;
3283 /* Assert: All other get_pfacts fields are zero! */
3284
3285 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3286 ioc->name, portnum));
3287
3288 /* No non-zero fields in the get_pfacts request are greater than
3289 * 1 byte in size, so we can just fire it off as is.
3290 */
3291 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3292 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3293 if (ii != 0)
3294 return ii;
3295
3296 /* Did we get a valid reply? */
3297
3298 /* Now byte swap the necessary fields in the response. */
3299 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3300 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3301 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3302 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3303 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3304 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3305 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3306 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3307 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3308
3309 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3310 pfacts->MaxDevices;
3311 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3312 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3313
3314 /*
3315 * Place all the devices on channels
3316 *
3317 * (for debuging)
3318 */
3319 if (mpt_channel_mapping) {
3320 ioc->devices_per_bus = 1;
3321 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3322 }
3323
3324 return 0;
3325}
3326
3327/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3328/**
3329 * SendIocInit - Send IOCInit request to MPT adapter.
3330 * @ioc: Pointer to MPT_ADAPTER structure
3331 * @sleepFlag: Specifies whether the process can sleep
3332 *
3333 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3334 *
3335 * Returns 0 for success, non-zero for failure.
3336 */
3337static int
3338SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3339{
3340 IOCInit_t ioc_init;
3341 MPIDefaultReply_t init_reply;
3342 u32 state;
3343 int r;
3344 int count;
3345 int cntdn;
3346
3347 memset(&ioc_init, 0, sizeof(ioc_init));
3348 memset(&init_reply, 0, sizeof(init_reply));
3349
3350 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3351 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3352
3353 /* If we are in a recovery mode and we uploaded the FW image,
3354 * then this pointer is not NULL. Skip the upload a second time.
3355 * Set this flag if cached_fw set for either IOC.
3356 */
3357 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3358 ioc->upload_fw = 1;
3359 else
3360 ioc->upload_fw = 0;
3361 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3362 ioc->name, ioc->upload_fw, ioc->facts.Flags));
3363
3364 ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3365 ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3366
3367 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3368 ioc->name, ioc->facts.MsgVersion));
3369 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3370 // set MsgVersion and HeaderVersion host driver was built with
3371 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3372 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3373
3374 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3375 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3376 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3377 return -99;
3378 }
3379 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
3380
3381 if (ioc->sg_addr_size == sizeof(u64)) {
3382 /* Save the upper 32-bits of the request
3383 * (reply) and sense buffers.
3384 */
3385 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3386 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3387 } else {
3388 /* Force 32-bit addressing */
3389 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3390 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3391 }
3392
3393 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3394 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3395 ioc->facts.MaxDevices = ioc_init.MaxDevices;
3396 ioc->facts.MaxBuses = ioc_init.MaxBuses;
3397
3398 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3399 ioc->name, &ioc_init));
3400
3401 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3402 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3403 if (r != 0) {
3404 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3405 return r;
3406 }
3407
3408 /* No need to byte swap the multibyte fields in the reply
3409 * since we don't even look at its contents.
3410 */
3411
3412 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3413 ioc->name, &ioc_init));
3414
3415 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3416 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3417 return r;
3418 }
3419
3420 /* YIKES! SUPER IMPORTANT!!!
3421 * Poll IocState until _OPERATIONAL while IOC is doing
3422 * LoopInit and TargetDiscovery!
3423 */
3424 count = 0;
3425 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
3426 state = mpt_GetIocState(ioc, 1);
3427 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3428 if (sleepFlag == CAN_SLEEP) {
3429 msleep(1);
3430 } else {
3431 mdelay(1);
3432 }
3433
3434 if (!cntdn) {
3435 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3436 ioc->name, (int)((count+5)/HZ));
3437 return -9;
3438 }
3439
3440 state = mpt_GetIocState(ioc, 1);
3441 count++;
3442 }
3443 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3444 ioc->name, count));
3445
3446 ioc->aen_event_read_flag=0;
3447 return r;
3448}
3449
3450/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3451/**
3452 * SendPortEnable - Send PortEnable request to MPT adapter port.
3453 * @ioc: Pointer to MPT_ADAPTER structure
3454 * @portnum: Port number to enable
3455 * @sleepFlag: Specifies whether the process can sleep
3456 *
3457 * Send PortEnable to bring IOC to OPERATIONAL state.
3458 *
3459 * Returns 0 for success, non-zero for failure.
3460 */
3461static int
3462SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3463{
3464 PortEnable_t port_enable;
3465 MPIDefaultReply_t reply_buf;
3466 int rc;
3467 int req_sz;
3468 int reply_sz;
3469
3470 /* Destination... */
3471 reply_sz = sizeof(MPIDefaultReply_t);
3472 memset(&reply_buf, 0, reply_sz);
3473
3474 req_sz = sizeof(PortEnable_t);
3475 memset(&port_enable, 0, req_sz);
3476
3477 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3478 port_enable.PortNumber = portnum;
3479/* port_enable.ChainOffset = 0; */
3480/* port_enable.MsgFlags = 0; */
3481/* port_enable.MsgContext = 0; */
3482
3483 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3484 ioc->name, portnum, &port_enable));
3485
3486 /* RAID FW may take a long time to enable
3487 */
3488 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3489 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3490 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3491 300 /*seconds*/, sleepFlag);
3492 } else {
3493 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3494 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3495 30 /*seconds*/, sleepFlag);
3496 }
3497 return rc;
3498}
3499
3500/**
3501 * mpt_alloc_fw_memory - allocate firmware memory
3502 * @ioc: Pointer to MPT_ADAPTER structure
3503 * @size: total FW bytes
3504 *
3505 * If memory has already been allocated, the same (cached) value
3506 * is returned.
3507 *
3508 * Return 0 if successful, or non-zero for failure
3509 **/
3510int
3511mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3512{
3513 int rc;
3514
3515 if (ioc->cached_fw) {
3516 rc = 0; /* use already allocated memory */
3517 goto out;
3518 }
3519 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3520 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
3521 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3522 rc = 0;
3523 goto out;
3524 }
3525 ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
3526 if (!ioc->cached_fw) {
3527 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3528 ioc->name);
3529 rc = -1;
3530 } else {
3531 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
3532 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3533 ioc->alloc_total += size;
3534 rc = 0;
3535 }
3536 out:
3537 return rc;
3538}
3539
3540/**
3541 * mpt_free_fw_memory - free firmware memory
3542 * @ioc: Pointer to MPT_ADAPTER structure
3543 *
3544 * If alt_img is NULL, delete from ioc structure.
3545 * Else, delete a secondary image in same format.
3546 **/
3547void
3548mpt_free_fw_memory(MPT_ADAPTER *ioc)
3549{
3550 int sz;
3551
3552 if (!ioc->cached_fw)
3553 return;
3554
3555 sz = ioc->facts.FWImageSize;
3556 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
3557 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3558 pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
3559 ioc->alloc_total -= sz;
3560 ioc->cached_fw = NULL;
3561}
3562
3563/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3564/**
3565 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3566 * @ioc: Pointer to MPT_ADAPTER structure
3567 * @sleepFlag: Specifies whether the process can sleep
3568 *
3569 * Returns 0 for success, >0 for handshake failure
3570 * <0 for fw upload failure.
3571 *
3572 * Remark: If bound IOC and a successful FWUpload was performed
3573 * on the bound IOC, the second image is discarded
3574 * and memory is free'd. Both channels must upload to prevent
3575 * IOC from running in degraded mode.
3576 */
3577static int
3578mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3579{
3580 u8 reply[sizeof(FWUploadReply_t)];
3581 FWUpload_t *prequest;
3582 FWUploadReply_t *preply;
3583 FWUploadTCSGE_t *ptcsge;
3584 u32 flagsLength;
3585 int ii, sz, reply_sz;
3586 int cmdStatus;
3587 int request_size;
3588 /* If the image size is 0, we are done.
3589 */
3590 if ((sz = ioc->facts.FWImageSize) == 0)
3591 return 0;
3592
3593 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3594 return -ENOMEM;
3595
3596 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
3597 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3598
3599 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3600 kzalloc(ioc->req_sz, GFP_KERNEL);
3601 if (!prequest) {
3602 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3603 "while allocating memory \n", ioc->name));
3604 mpt_free_fw_memory(ioc);
3605 return -ENOMEM;
3606 }
3607
3608 preply = (FWUploadReply_t *)&reply;
3609
3610 reply_sz = sizeof(reply);
3611 memset(preply, 0, reply_sz);
3612
3613 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3614 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3615
3616 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3617 ptcsge->DetailsLength = 12;
3618 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3619 ptcsge->ImageSize = cpu_to_le32(sz);
3620 ptcsge++;
3621
3622 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3623 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3624 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3625 ioc->SGE_size;
3626 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3627 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3628 ioc->facts.FWImageSize, request_size));
3629 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3630
3631 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3632 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3633
3634 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3635 "rc=%x \n", ioc->name, ii));
3636
3637 cmdStatus = -EFAULT;
3638 if (ii == 0) {
3639 /* Handshake transfer was complete and successful.
3640 * Check the Reply Frame.
3641 */
3642 int status;
3643 status = le16_to_cpu(preply->IOCStatus) &
3644 MPI_IOCSTATUS_MASK;
3645 if (status == MPI_IOCSTATUS_SUCCESS &&
3646 ioc->facts.FWImageSize ==
3647 le32_to_cpu(preply->ActualImageSize))
3648 cmdStatus = 0;
3649 }
3650 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3651 ioc->name, cmdStatus));
3652
3653
3654 if (cmdStatus) {
3655 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3656 "freeing image \n", ioc->name));
3657 mpt_free_fw_memory(ioc);
3658 }
3659 kfree(prequest);
3660
3661 return cmdStatus;
3662}
3663
3664/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3665/**
3666 * mpt_downloadboot - DownloadBoot code
3667 * @ioc: Pointer to MPT_ADAPTER structure
3668 * @pFwHeader: Pointer to firmware header info
3669 * @sleepFlag: Specifies whether the process can sleep
3670 *
3671 * FwDownloadBoot requires Programmed IO access.
3672 *
3673 * Returns 0 for success
3674 * -1 FW Image size is 0
3675 * -2 No valid cached_fw Pointer
3676 * <0 for fw upload failure.
3677 */
3678static int
3679mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3680{
3681 MpiExtImageHeader_t *pExtImage;
3682 u32 fwSize;
3683 u32 diag0val;
3684 int count;
3685 u32 *ptrFw;
3686 u32 diagRwData;
3687 u32 nextImage;
3688 u32 load_addr;
3689 u32 ioc_state=0;
3690
3691 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3692 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3693
3694 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3695 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3696 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3697 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3698 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3699 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3700
3701 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3702
3703 /* wait 1 msec */
3704 if (sleepFlag == CAN_SLEEP) {
3705 msleep(1);
3706 } else {
3707 mdelay (1);
3708 }
3709
3710 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3711 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3712
3713 for (count = 0; count < 30; count ++) {
3714 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3715 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3716 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3717 ioc->name, count));
3718 break;
3719 }
3720 /* wait .1 sec */
3721 if (sleepFlag == CAN_SLEEP) {
3722 msleep (100);
3723 } else {
3724 mdelay (100);
3725 }
3726 }
3727
3728 if ( count == 30 ) {
3729 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3730 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3731 ioc->name, diag0val));
3732 return -3;
3733 }
3734
3735 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3736 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3737 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3738 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3739 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3740 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3741
3742 /* Set the DiagRwEn and Disable ARM bits */
3743 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3744
3745 fwSize = (pFwHeader->ImageSize + 3)/4;
3746 ptrFw = (u32 *) pFwHeader;
3747
3748 /* Write the LoadStartAddress to the DiagRw Address Register
3749 * using Programmed IO
3750 */
3751 if (ioc->errata_flag_1064)
3752 pci_enable_io_access(ioc->pcidev);
3753
3754 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3755 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3756 ioc->name, pFwHeader->LoadStartAddress));
3757
3758 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3759 ioc->name, fwSize*4, ptrFw));
3760 while (fwSize--) {
3761 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3762 }
3763
3764 nextImage = pFwHeader->NextImageHeaderOffset;
3765 while (nextImage) {
3766 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3767
3768 load_addr = pExtImage->LoadStartAddress;
3769
3770 fwSize = (pExtImage->ImageSize + 3) >> 2;
3771 ptrFw = (u32 *)pExtImage;
3772
3773 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3774 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3775 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3776
3777 while (fwSize--) {
3778 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3779 }
3780 nextImage = pExtImage->NextImageHeaderOffset;
3781 }
3782
3783 /* Write the IopResetVectorRegAddr */
3784 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
3785 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3786
3787 /* Write the IopResetVectorValue */
3788 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3789 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3790
3791 /* Clear the internal flash bad bit - autoincrementing register,
3792 * so must do two writes.
3793 */
3794 if (ioc->bus_type == SPI) {
3795 /*
3796 * 1030 and 1035 H/W errata, workaround to access
3797 * the ClearFlashBadSignatureBit
3798 */
3799 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3800 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3801 diagRwData |= 0x40000000;
3802 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3803 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3804
3805 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3806 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3807 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3808 MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3809
3810 /* wait 1 msec */
3811 if (sleepFlag == CAN_SLEEP) {
3812 msleep (1);
3813 } else {
3814 mdelay (1);
3815 }
3816 }
3817
3818 if (ioc->errata_flag_1064)
3819 pci_disable_io_access(ioc->pcidev);
3820
3821 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3822 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3823 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3824 ioc->name, diag0val));
3825 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3826 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3827 ioc->name, diag0val));
3828 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3829
3830 /* Write 0xFF to reset the sequencer */
3831 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3832
3833 if (ioc->bus_type == SAS) {
3834 ioc_state = mpt_GetIocState(ioc, 0);
3835 if ( (GetIocFacts(ioc, sleepFlag,
3836 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3837 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3838 ioc->name, ioc_state));
3839 return -EFAULT;
3840 }
3841 }
3842
3843 for (count=0; count<HZ*20; count++) {
3844 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3845 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3846 "downloadboot successful! (count=%d) IocState=%x\n",
3847 ioc->name, count, ioc_state));
3848 if (ioc->bus_type == SAS) {
3849 return 0;
3850 }
3851 if ((SendIocInit(ioc, sleepFlag)) != 0) {
3852 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3853 "downloadboot: SendIocInit failed\n",
3854 ioc->name));
3855 return -EFAULT;
3856 }
3857 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3858 "downloadboot: SendIocInit successful\n",
3859 ioc->name));
3860 return 0;
3861 }
3862 if (sleepFlag == CAN_SLEEP) {
3863 msleep (10);
3864 } else {
3865 mdelay (10);
3866 }
3867 }
3868 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3869 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3870 return -EFAULT;
3871}
3872
3873/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3874/**
3875 * KickStart - Perform hard reset of MPT adapter.
3876 * @ioc: Pointer to MPT_ADAPTER structure
3877 * @force: Force hard reset
3878 * @sleepFlag: Specifies whether the process can sleep
3879 *
3880 * This routine places MPT adapter in diagnostic mode via the
3881 * WriteSequence register, and then performs a hard reset of adapter
3882 * via the Diagnostic register.
3883 *
3884 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
3885 * or NO_SLEEP (interrupt thread, use mdelay)
3886 * force - 1 if doorbell active, board fault state
3887 * board operational, IOC_RECOVERY or
3888 * IOC_BRINGUP and there is an alt_ioc.
3889 * 0 else
3890 *
3891 * Returns:
3892 * 1 - hard reset, READY
3893 * 0 - no reset due to History bit, READY
3894 * -1 - no reset due to History bit but not READY
3895 * OR reset but failed to come READY
3896 * -2 - no reset, could not enter DIAG mode
3897 * -3 - reset but bad FW bit
3898 */
3899static int
3900KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3901{
3902 int hard_reset_done = 0;
3903 u32 ioc_state=0;
3904 int cnt,cntdn;
3905
3906 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3907 if (ioc->bus_type == SPI) {
3908 /* Always issue a Msg Unit Reset first. This will clear some
3909 * SCSI bus hang conditions.
3910 */
3911 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3912
3913 if (sleepFlag == CAN_SLEEP) {
3914 msleep (1000);
3915 } else {
3916 mdelay (1000);
3917 }
3918 }
3919
3920 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3921 if (hard_reset_done < 0)
3922 return hard_reset_done;
3923
3924 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3925 ioc->name));
3926
3927 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
3928 for (cnt=0; cnt<cntdn; cnt++) {
3929 ioc_state = mpt_GetIocState(ioc, 1);
3930 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3931 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3932 ioc->name, cnt));
3933 return hard_reset_done;
3934 }
3935 if (sleepFlag == CAN_SLEEP) {
3936 msleep (10);
3937 } else {
3938 mdelay (10);
3939 }
3940 }
3941
3942 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3943 ioc->name, mpt_GetIocState(ioc, 0)));
3944 return -1;
3945}
3946
3947/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3948/**
3949 * mpt_diag_reset - Perform hard reset of the adapter.
3950 * @ioc: Pointer to MPT_ADAPTER structure
3951 * @ignore: Set if to honor and clear to ignore
3952 * the reset history bit
3953 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3954 * else set to NO_SLEEP (use mdelay instead)
3955 *
3956 * This routine places the adapter in diagnostic mode via the
3957 * WriteSequence register and then performs a hard reset of adapter
3958 * via the Diagnostic register. Adapter should be in ready state
3959 * upon successful completion.
3960 *
3961 * Returns: 1 hard reset successful
3962 * 0 no reset performed because reset history bit set
3963 * -2 enabling diagnostic mode failed
3964 * -3 diagnostic reset failed
3965 */
3966static int
3967mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3968{
3969 u32 diag0val;
3970 u32 doorbell;
3971 int hard_reset_done = 0;
3972 int count = 0;
3973 u32 diag1val = 0;
3974 MpiFwHeader_t *cached_fw; /* Pointer to FW */
3975 u8 cb_idx;
3976
3977 /* Clear any existing interrupts */
3978 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3979
3980 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3981
3982 if (!ignore)
3983 return 0;
3984
3985 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3986 "address=%p\n", ioc->name, __func__,
3987 &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3988 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3989 if (sleepFlag == CAN_SLEEP)
3990 msleep(1);
3991 else
3992 mdelay(1);
3993
3994 /*
3995 * Call each currently registered protocol IOC reset handler
3996 * with pre-reset indication.
3997 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3998 * MptResetHandlers[] registered yet.
3999 */
4000 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4001 if (MptResetHandlers[cb_idx])
4002 (*(MptResetHandlers[cb_idx]))(ioc,
4003 MPT_IOC_PRE_RESET);
4004 }
4005
4006 for (count = 0; count < 60; count ++) {
4007 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4008 doorbell &= MPI_IOC_STATE_MASK;
4009
4010 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4011 "looking for READY STATE: doorbell=%x"
4012 " count=%d\n",
4013 ioc->name, doorbell, count));
4014
4015 if (doorbell == MPI_IOC_STATE_READY) {
4016 return 1;
4017 }
4018
4019 /* wait 1 sec */
4020 if (sleepFlag == CAN_SLEEP)
4021 msleep(1000);
4022 else
4023 mdelay(1000);
4024 }
4025 return -1;
4026 }
4027
4028 /* Use "Diagnostic reset" method! (only thing available!) */
4029 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4030
4031 if (ioc->debug_level & MPT_DEBUG) {
4032 if (ioc->alt_ioc)
4033 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4034 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4035 ioc->name, diag0val, diag1val));
4036 }
4037
4038 /* Do the reset if we are told to ignore the reset history
4039 * or if the reset history is 0
4040 */
4041 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4042 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4043 /* Write magic sequence to WriteSequence register
4044 * Loop until in diagnostic mode
4045 */
4046 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4047 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4048 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4049 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4050 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4051 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4052
4053 /* wait 100 msec */
4054 if (sleepFlag == CAN_SLEEP) {
4055 msleep (100);
4056 } else {
4057 mdelay (100);
4058 }
4059
4060 count++;
4061 if (count > 20) {
4062 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4063 ioc->name, diag0val);
4064 return -2;
4065
4066 }
4067
4068 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4069
4070 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4071 ioc->name, diag0val));
4072 }
4073
4074 if (ioc->debug_level & MPT_DEBUG) {
4075 if (ioc->alt_ioc)
4076 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4077 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4078 ioc->name, diag0val, diag1val));
4079 }
4080 /*
4081 * Disable the ARM (Bug fix)
4082 *
4083 */
4084 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4085 mdelay(1);
4086
4087 /*
4088 * Now hit the reset bit in the Diagnostic register
4089 * (THE BIG HAMMER!) (Clears DRWE bit).
4090 */
4091 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4092 hard_reset_done = 1;
4093 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4094 ioc->name));
4095
4096 /*
4097 * Call each currently registered protocol IOC reset handler
4098 * with pre-reset indication.
4099 * NOTE: If we're doing _IOC_BRINGUP, there can be no
4100 * MptResetHandlers[] registered yet.
4101 */
4102 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4103 if (MptResetHandlers[cb_idx]) {
4104 mpt_signal_reset(cb_idx,
4105 ioc, MPT_IOC_PRE_RESET);
4106 if (ioc->alt_ioc) {
4107 mpt_signal_reset(cb_idx,
4108 ioc->alt_ioc, MPT_IOC_PRE_RESET);
4109 }
4110 }
4111 }
4112
4113 if (ioc->cached_fw)
4114 cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4115 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4116 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4117 else
4118 cached_fw = NULL;
4119 if (cached_fw) {
4120 /* If the DownloadBoot operation fails, the
4121 * IOC will be left unusable. This is a fatal error
4122 * case. _diag_reset will return < 0
4123 */
4124 for (count = 0; count < 30; count ++) {
4125 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4126 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4127 break;
4128 }
4129
4130 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4131 ioc->name, diag0val, count));
4132 /* wait 1 sec */
4133 if (sleepFlag == CAN_SLEEP) {
4134 msleep (1000);
4135 } else {
4136 mdelay (1000);
4137 }
4138 }
4139 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4140 printk(MYIOC_s_WARN_FMT
4141 "firmware downloadboot failure (%d)!\n", ioc->name, count);
4142 }
4143
4144 } else {
4145 /* Wait for FW to reload and for board
4146 * to go to the READY state.
4147 * Maximum wait is 60 seconds.
4148 * If fail, no error will check again
4149 * with calling program.
4150 */
4151 for (count = 0; count < 60; count ++) {
4152 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4153 doorbell &= MPI_IOC_STATE_MASK;
4154
4155 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4156 "looking for READY STATE: doorbell=%x"
4157 " count=%d\n", ioc->name, doorbell, count));
4158
4159 if (doorbell == MPI_IOC_STATE_READY) {
4160 break;
4161 }
4162
4163 /* wait 1 sec */
4164 if (sleepFlag == CAN_SLEEP) {
4165 msleep (1000);
4166 } else {
4167 mdelay (1000);
4168 }
4169 }
4170
4171 if (doorbell != MPI_IOC_STATE_READY)
4172 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4173 "after reset! IocState=%x", ioc->name,
4174 doorbell);
4175 }
4176 }
4177
4178 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4179 if (ioc->debug_level & MPT_DEBUG) {
4180 if (ioc->alt_ioc)
4181 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4182 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4183 ioc->name, diag0val, diag1val));
4184 }
4185
4186 /* Clear RESET_HISTORY bit! Place board in the
4187 * diagnostic mode to update the diag register.
4188 */
4189 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4190 count = 0;
4191 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4192 /* Write magic sequence to WriteSequence register
4193 * Loop until in diagnostic mode
4194 */
4195 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4196 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4197 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4198 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4199 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4200 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4201
4202 /* wait 100 msec */
4203 if (sleepFlag == CAN_SLEEP) {
4204 msleep (100);
4205 } else {
4206 mdelay (100);
4207 }
4208
4209 count++;
4210 if (count > 20) {
4211 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4212 ioc->name, diag0val);
4213 break;
4214 }
4215 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4216 }
4217 diag0val &= ~MPI_DIAG_RESET_HISTORY;
4218 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4219 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4220 if (diag0val & MPI_DIAG_RESET_HISTORY) {
4221 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4222 ioc->name);
4223 }
4224
4225 /* Disable Diagnostic Mode
4226 */
4227 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4228
4229 /* Check FW reload status flags.
4230 */
4231 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4232 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4233 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4234 ioc->name, diag0val);
4235 return -3;
4236 }
4237
4238 if (ioc->debug_level & MPT_DEBUG) {
4239 if (ioc->alt_ioc)
4240 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4241 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4242 ioc->name, diag0val, diag1val));
4243 }
4244
4245 /*
4246 * Reset flag that says we've enabled event notification
4247 */
4248 ioc->facts.EventState = 0;
4249
4250 if (ioc->alt_ioc)
4251 ioc->alt_ioc->facts.EventState = 0;
4252
4253 return hard_reset_done;
4254}
4255
4256/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4257/**
4258 * SendIocReset - Send IOCReset request to MPT adapter.
4259 * @ioc: Pointer to MPT_ADAPTER structure
4260 * @reset_type: reset type, expected values are
4261 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4262 * @sleepFlag: Specifies whether the process can sleep
4263 *
4264 * Send IOCReset request to the MPT adapter.
4265 *
4266 * Returns 0 for success, non-zero for failure.
4267 */
4268static int
4269SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4270{
4271 int r;
4272 u32 state;
4273 int cntdn, count;
4274
4275 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4276 ioc->name, reset_type));
4277 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4278 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4279 return r;
4280
4281 /* FW ACK'd request, wait for READY state
4282 */
4283 count = 0;
4284 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
4285
4286 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4287 cntdn--;
4288 count++;
4289 if (!cntdn) {
4290 if (sleepFlag != CAN_SLEEP)
4291 count *= 10;
4292
4293 printk(MYIOC_s_ERR_FMT
4294 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4295 ioc->name, state, (int)((count+5)/HZ));
4296 return -ETIME;
4297 }
4298
4299 if (sleepFlag == CAN_SLEEP) {
4300 msleep(1);
4301 } else {
4302 mdelay (1); /* 1 msec delay */
4303 }
4304 }
4305
4306 /* TODO!
4307 * Cleanup all event stuff for this IOC; re-issue EventNotification
4308 * request if needed.
4309 */
4310 if (ioc->facts.Function)
4311 ioc->facts.EventState = 0;
4312
4313 return 0;
4314}
4315
4316/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4317/**
4318 * initChainBuffers - Allocate memory for and initialize chain buffers
4319 * @ioc: Pointer to MPT_ADAPTER structure
4320 *
4321 * Allocates memory for and initializes chain buffers,
4322 * chain buffer control arrays and spinlock.
4323 */
4324static int
4325initChainBuffers(MPT_ADAPTER *ioc)
4326{
4327 u8 *mem;
4328 int sz, ii, num_chain;
4329 int scale, num_sge, numSGE;
4330
4331 /* ReqToChain size must equal the req_depth
4332 * index = req_idx
4333 */
4334 if (ioc->ReqToChain == NULL) {
4335 sz = ioc->req_depth * sizeof(int);
4336 mem = kmalloc(sz, GFP_ATOMIC);
4337 if (mem == NULL)
4338 return -1;
4339
4340 ioc->ReqToChain = (int *) mem;
4341 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
4342 ioc->name, mem, sz));
4343 mem = kmalloc(sz, GFP_ATOMIC);
4344 if (mem == NULL)
4345 return -1;
4346
4347 ioc->RequestNB = (int *) mem;
4348 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
4349 ioc->name, mem, sz));
4350 }
4351 for (ii = 0; ii < ioc->req_depth; ii++) {
4352 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4353 }
4354
4355 /* ChainToChain size must equal the total number
4356 * of chain buffers to be allocated.
4357 * index = chain_idx
4358 *
4359 * Calculate the number of chain buffers needed(plus 1) per I/O
4360 * then multiply the maximum number of simultaneous cmds
4361 *
4362 * num_sge = num sge in request frame + last chain buffer
4363 * scale = num sge per chain buffer if no chain element
4364 */
4365 scale = ioc->req_sz / ioc->SGE_size;
4366 if (ioc->sg_addr_size == sizeof(u64))
4367 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
4368 else
4369 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4370
4371 if (ioc->sg_addr_size == sizeof(u64)) {
4372 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4373 (ioc->req_sz - 60) / ioc->SGE_size;
4374 } else {
4375 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4376 scale + (ioc->req_sz - 64) / ioc->SGE_size;
4377 }
4378 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4379 ioc->name, num_sge, numSGE));
4380
4381 if (ioc->bus_type == FC) {
4382 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4383 numSGE = MPT_SCSI_FC_SG_DEPTH;
4384 } else {
4385 if (numSGE > MPT_SCSI_SG_DEPTH)
4386 numSGE = MPT_SCSI_SG_DEPTH;
4387 }
4388
4389 num_chain = 1;
4390 while (numSGE - num_sge > 0) {
4391 num_chain++;
4392 num_sge += (scale - 1);
4393 }
4394 num_chain++;
4395
4396 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4397 ioc->name, numSGE, num_sge, num_chain));
4398
4399 if (ioc->bus_type == SPI)
4400 num_chain *= MPT_SCSI_CAN_QUEUE;
4401 else if (ioc->bus_type == SAS)
4402 num_chain *= MPT_SAS_CAN_QUEUE;
4403 else
4404 num_chain *= MPT_FC_CAN_QUEUE;
4405
4406 ioc->num_chain = num_chain;
4407
4408 sz = num_chain * sizeof(int);
4409 if (ioc->ChainToChain == NULL) {
4410 mem = kmalloc(sz, GFP_ATOMIC);
4411 if (mem == NULL)
4412 return -1;
4413
4414 ioc->ChainToChain = (int *) mem;
4415 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4416 ioc->name, mem, sz));
4417 } else {
4418 mem = (u8 *) ioc->ChainToChain;
4419 }
4420 memset(mem, 0xFF, sz);
4421 return num_chain;
4422}
4423
4424/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4425/**
4426 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
4427 * @ioc: Pointer to MPT_ADAPTER structure
4428 *
4429 * This routine allocates memory for the MPT reply and request frame
4430 * pools (if necessary), and primes the IOC reply FIFO with
4431 * reply frames.
4432 *
4433 * Returns 0 for success, non-zero for failure.
4434 */
4435static int
4436PrimeIocFifos(MPT_ADAPTER *ioc)
4437{
4438 MPT_FRAME_HDR *mf;
4439 unsigned long flags;
4440 dma_addr_t alloc_dma;
4441 u8 *mem;
4442 int i, reply_sz, sz, total_size, num_chain;
4443 u64 dma_mask;
4444
4445 dma_mask = 0;
4446
4447 /* Prime reply FIFO... */
4448
4449 if (ioc->reply_frames == NULL) {
4450 if ( (num_chain = initChainBuffers(ioc)) < 0)
4451 return -1;
4452 /*
4453 * 1078 errata workaround for the 36GB limitation
4454 */
4455 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4456 ioc->dma_mask > DMA_BIT_MASK(35)) {
4457 if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
4458 && !pci_set_consistent_dma_mask(ioc->pcidev,
4459 DMA_BIT_MASK(32))) {
4460 dma_mask = DMA_BIT_MASK(35);
4461 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4462 "setting 35 bit addressing for "
4463 "Request/Reply/Chain and Sense Buffers\n",
4464 ioc->name));
4465 } else {
4466 /*Reseting DMA mask to 64 bit*/
4467 pci_set_dma_mask(ioc->pcidev,
4468 DMA_BIT_MASK(64));
4469 pci_set_consistent_dma_mask(ioc->pcidev,
4470 DMA_BIT_MASK(64));
4471
4472 printk(MYIOC_s_ERR_FMT
4473 "failed setting 35 bit addressing for "
4474 "Request/Reply/Chain and Sense Buffers\n",
4475 ioc->name);
4476 return -1;
4477 }
4478 }
4479
4480 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4481 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4482 ioc->name, ioc->reply_sz, ioc->reply_depth));
4483 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4484 ioc->name, reply_sz, reply_sz));
4485
4486 sz = (ioc->req_sz * ioc->req_depth);
4487 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4488 ioc->name, ioc->req_sz, ioc->req_depth));
4489 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4490 ioc->name, sz, sz));
4491 total_size += sz;
4492
4493 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4494 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4495 ioc->name, ioc->req_sz, num_chain));
4496 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4497 ioc->name, sz, sz, num_chain));
4498
4499 total_size += sz;
4500 mem = dma_alloc_coherent(&ioc->pcidev->dev, total_size,
4501 &alloc_dma, GFP_KERNEL);
4502 if (mem == NULL) {
4503 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4504 ioc->name);
4505 goto out_fail;
4506 }
4507
4508 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4509 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4510
4511 memset(mem, 0, total_size);
4512 ioc->alloc_total += total_size;
4513 ioc->alloc = mem;
4514 ioc->alloc_dma = alloc_dma;
4515 ioc->alloc_sz = total_size;
4516 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4517 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4518
4519 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4520 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4521
4522 alloc_dma += reply_sz;
4523 mem += reply_sz;
4524
4525 /* Request FIFO - WE manage this! */
4526
4527 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4528 ioc->req_frames_dma = alloc_dma;
4529
4530 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4531 ioc->name, mem, (void *)(ulong)alloc_dma));
4532
4533 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4534
4535 for (i = 0; i < ioc->req_depth; i++) {
4536 alloc_dma += ioc->req_sz;
4537 mem += ioc->req_sz;
4538 }
4539
4540 ioc->ChainBuffer = mem;
4541 ioc->ChainBufferDMA = alloc_dma;
4542
4543 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4544 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4545
4546 /* Initialize the free chain Q.
4547 */
4548
4549 INIT_LIST_HEAD(&ioc->FreeChainQ);
4550
4551 /* Post the chain buffers to the FreeChainQ.
4552 */
4553 mem = (u8 *)ioc->ChainBuffer;
4554 for (i=0; i < num_chain; i++) {
4555 mf = (MPT_FRAME_HDR *) mem;
4556 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4557 mem += ioc->req_sz;
4558 }
4559
4560 /* Initialize Request frames linked list
4561 */
4562 alloc_dma = ioc->req_frames_dma;
4563 mem = (u8 *) ioc->req_frames;
4564
4565 spin_lock_irqsave(&ioc->FreeQlock, flags);
4566 INIT_LIST_HEAD(&ioc->FreeQ);
4567 for (i = 0; i < ioc->req_depth; i++) {
4568 mf = (MPT_FRAME_HDR *) mem;
4569
4570 /* Queue REQUESTs *internally*! */
4571 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4572
4573 mem += ioc->req_sz;
4574 }
4575 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4576
4577 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4578 ioc->sense_buf_pool = dma_alloc_coherent(&ioc->pcidev->dev, sz,
4579 &ioc->sense_buf_pool_dma, GFP_KERNEL);
4580 if (ioc->sense_buf_pool == NULL) {
4581 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4582 ioc->name);
4583 goto out_fail;
4584 }
4585
4586 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4587 ioc->alloc_total += sz;
4588 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4589 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4590
4591 }
4592
4593 /* Post Reply frames to FIFO
4594 */
4595 alloc_dma = ioc->alloc_dma;
4596 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4597 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4598
4599 for (i = 0; i < ioc->reply_depth; i++) {
4600 /* Write each address to the IOC! */
4601 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4602 alloc_dma += ioc->reply_sz;
4603 }
4604
4605 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4606 ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
4607 ioc->dma_mask))
4608 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4609 "restoring 64 bit addressing\n", ioc->name));
4610
4611 return 0;
4612
4613out_fail:
4614
4615 if (ioc->alloc != NULL) {
4616 sz = ioc->alloc_sz;
4617 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc,
4618 ioc->alloc_dma);
4619 ioc->reply_frames = NULL;
4620 ioc->req_frames = NULL;
4621 ioc->alloc_total -= sz;
4622 }
4623 if (ioc->sense_buf_pool != NULL) {
4624 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4625 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool,
4626 ioc->sense_buf_pool_dma);
4627 ioc->sense_buf_pool = NULL;
4628 }
4629
4630 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4631 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
4632 DMA_BIT_MASK(64)))
4633 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4634 "restoring 64 bit addressing\n", ioc->name));
4635
4636 return -1;
4637}
4638
4639/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4640/**
4641 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4642 * from IOC via doorbell handshake method.
4643 * @ioc: Pointer to MPT_ADAPTER structure
4644 * @reqBytes: Size of the request in bytes
4645 * @req: Pointer to MPT request frame
4646 * @replyBytes: Expected size of the reply in bytes
4647 * @u16reply: Pointer to area where reply should be written
4648 * @maxwait: Max wait time for a reply (in seconds)
4649 * @sleepFlag: Specifies whether the process can sleep
4650 *
4651 * NOTES: It is the callers responsibility to byte-swap fields in the
4652 * request which are greater than 1 byte in size. It is also the
4653 * callers responsibility to byte-swap response fields which are
4654 * greater than 1 byte in size.
4655 *
4656 * Returns 0 for success, non-zero for failure.
4657 */
4658static int
4659mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4660 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4661{
4662 MPIDefaultReply_t *mptReply;
4663 int failcnt = 0;
4664 int t;
4665
4666 /*
4667 * Get ready to cache a handshake reply
4668 */
4669 ioc->hs_reply_idx = 0;
4670 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4671 mptReply->MsgLength = 0;
4672
4673 /*
4674 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4675 * then tell IOC that we want to handshake a request of N words.
4676 * (WRITE u32val to Doorbell reg).
4677 */
4678 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4679 CHIPREG_WRITE32(&ioc->chip->Doorbell,
4680 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4681 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4682
4683 /*
4684 * Wait for IOC's doorbell handshake int
4685 */
4686 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4687 failcnt++;
4688
4689 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4690 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4691
4692 /* Read doorbell and check for active bit */
4693 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4694 return -1;
4695
4696 /*
4697 * Clear doorbell int (WRITE 0 to IntStatus reg),
4698 * then wait for IOC to ACKnowledge that it's ready for
4699 * our handshake request.
4700 */
4701 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4702 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4703 failcnt++;
4704
4705 if (!failcnt) {
4706 int ii;
4707 u8 *req_as_bytes = (u8 *) req;
4708
4709 /*
4710 * Stuff request words via doorbell handshake,
4711 * with ACK from IOC for each.
4712 */
4713 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4714 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
4715 (req_as_bytes[(ii*4) + 1] << 8) |
4716 (req_as_bytes[(ii*4) + 2] << 16) |
4717 (req_as_bytes[(ii*4) + 3] << 24));
4718
4719 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4720 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4721 failcnt++;
4722 }
4723
4724 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4725 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4726
4727 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4728 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4729
4730 /*
4731 * Wait for completion of doorbell handshake reply from the IOC
4732 */
4733 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4734 failcnt++;
4735
4736 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4737 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4738
4739 /*
4740 * Copy out the cached reply...
4741 */
4742 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4743 u16reply[ii] = ioc->hs_reply[ii];
4744 } else {
4745 return -99;
4746 }
4747
4748 return -failcnt;
4749}
4750
4751/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4752/**
4753 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4754 * @ioc: Pointer to MPT_ADAPTER structure
4755 * @howlong: How long to wait (in seconds)
4756 * @sleepFlag: Specifies whether the process can sleep
4757 *
4758 * This routine waits (up to ~2 seconds max) for IOC doorbell
4759 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4760 * bit in its IntStatus register being clear.
4761 *
4762 * Returns a negative value on failure, else wait loop count.
4763 */
4764static int
4765WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4766{
4767 int cntdn;
4768 int count = 0;
4769 u32 intstat=0;
4770
4771 cntdn = 1000 * howlong;
4772
4773 if (sleepFlag == CAN_SLEEP) {
4774 while (--cntdn) {
4775 msleep (1);
4776 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4777 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4778 break;
4779 count++;
4780 }
4781 } else {
4782 while (--cntdn) {
4783 udelay (1000);
4784 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4785 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4786 break;
4787 count++;
4788 }
4789 }
4790
4791 if (cntdn) {
4792 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4793 ioc->name, count));
4794 return count;
4795 }
4796
4797 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4798 ioc->name, count, intstat);
4799 return -1;
4800}
4801
4802/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4803/**
4804 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4805 * @ioc: Pointer to MPT_ADAPTER structure
4806 * @howlong: How long to wait (in seconds)
4807 * @sleepFlag: Specifies whether the process can sleep
4808 *
4809 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4810 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4811 *
4812 * Returns a negative value on failure, else wait loop count.
4813 */
4814static int
4815WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4816{
4817 int cntdn;
4818 int count = 0;
4819 u32 intstat=0;
4820
4821 cntdn = 1000 * howlong;
4822 if (sleepFlag == CAN_SLEEP) {
4823 while (--cntdn) {
4824 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4825 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4826 break;
4827 msleep(1);
4828 count++;
4829 }
4830 } else {
4831 while (--cntdn) {
4832 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4833 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4834 break;
4835 udelay (1000);
4836 count++;
4837 }
4838 }
4839
4840 if (cntdn) {
4841 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4842 ioc->name, count, howlong));
4843 return count;
4844 }
4845
4846 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4847 ioc->name, count, intstat);
4848 return -1;
4849}
4850
4851/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4852/**
4853 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4854 * @ioc: Pointer to MPT_ADAPTER structure
4855 * @howlong: How long to wait (in seconds)
4856 * @sleepFlag: Specifies whether the process can sleep
4857 *
4858 * This routine polls the IOC for a handshake reply, 16 bits at a time.
4859 * Reply is cached to IOC private area large enough to hold a maximum
4860 * of 128 bytes of reply data.
4861 *
4862 * Returns a negative value on failure, else size of reply in WORDS.
4863 */
4864static int
4865WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4866{
4867 int u16cnt = 0;
4868 int failcnt = 0;
4869 int t;
4870 u16 *hs_reply = ioc->hs_reply;
4871 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4872 u16 hword;
4873
4874 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4875
4876 /*
4877 * Get first two u16's so we can look at IOC's intended reply MsgLength
4878 */
4879 u16cnt=0;
4880 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4881 failcnt++;
4882 } else {
4883 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4884 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4885 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4886 failcnt++;
4887 else {
4888 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4889 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4890 }
4891 }
4892
4893 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4894 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4895 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4896
4897 /*
4898 * If no error (and IOC said MsgLength is > 0), piece together
4899 * reply 16 bits at a time.
4900 */
4901 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4902 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4903 failcnt++;
4904 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4905 /* don't overflow our IOC hs_reply[] buffer! */
4906 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4907 hs_reply[u16cnt] = hword;
4908 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4909 }
4910
4911 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4912 failcnt++;
4913 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4914
4915 if (failcnt) {
4916 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4917 ioc->name);
4918 return -failcnt;
4919 }
4920#if 0
4921 else if (u16cnt != (2 * mptReply->MsgLength)) {
4922 return -101;
4923 }
4924 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4925 return -102;
4926 }
4927#endif
4928
4929 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4930 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4931
4932 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4933 ioc->name, t, u16cnt/2));
4934 return u16cnt/2;
4935}
4936
4937/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4938/**
4939 * GetLanConfigPages - Fetch LANConfig pages.
4940 * @ioc: Pointer to MPT_ADAPTER structure
4941 *
4942 * Return: 0 for success
4943 * -ENOMEM if no memory available
4944 * -EPERM if not allowed due to ISR context
4945 * -EAGAIN if no msg frames currently available
4946 * -EFAULT for non-successful reply or no reply (timeout)
4947 */
4948static int
4949GetLanConfigPages(MPT_ADAPTER *ioc)
4950{
4951 ConfigPageHeader_t hdr;
4952 CONFIGPARMS cfg;
4953 LANPage0_t *ppage0_alloc;
4954 dma_addr_t page0_dma;
4955 LANPage1_t *ppage1_alloc;
4956 dma_addr_t page1_dma;
4957 int rc = 0;
4958 int data_sz;
4959 int copy_sz;
4960
4961 /* Get LAN Page 0 header */
4962 hdr.PageVersion = 0;
4963 hdr.PageLength = 0;
4964 hdr.PageNumber = 0;
4965 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4966 cfg.cfghdr.hdr = &hdr;
4967 cfg.physAddr = -1;
4968 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4969 cfg.dir = 0;
4970 cfg.pageAddr = 0;
4971 cfg.timeout = 0;
4972
4973 if ((rc = mpt_config(ioc, &cfg)) != 0)
4974 return rc;
4975
4976 if (hdr.PageLength > 0) {
4977 data_sz = hdr.PageLength * 4;
4978 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
4979 rc = -ENOMEM;
4980 if (ppage0_alloc) {
4981 memset((u8 *)ppage0_alloc, 0, data_sz);
4982 cfg.physAddr = page0_dma;
4983 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4984
4985 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4986 /* save the data */
4987 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4988 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4989
4990 }
4991
4992 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
4993
4994 /* FIXME!
4995 * Normalize endianness of structure data,
4996 * by byte-swapping all > 1 byte fields!
4997 */
4998
4999 }
5000
5001 if (rc)
5002 return rc;
5003 }
5004
5005 /* Get LAN Page 1 header */
5006 hdr.PageVersion = 0;
5007 hdr.PageLength = 0;
5008 hdr.PageNumber = 1;
5009 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
5010 cfg.cfghdr.hdr = &hdr;
5011 cfg.physAddr = -1;
5012 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5013 cfg.dir = 0;
5014 cfg.pageAddr = 0;
5015
5016 if ((rc = mpt_config(ioc, &cfg)) != 0)
5017 return rc;
5018
5019 if (hdr.PageLength == 0)
5020 return 0;
5021
5022 data_sz = hdr.PageLength * 4;
5023 rc = -ENOMEM;
5024 ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
5025 if (ppage1_alloc) {
5026 memset((u8 *)ppage1_alloc, 0, data_sz);
5027 cfg.physAddr = page1_dma;
5028 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5029
5030 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5031 /* save the data */
5032 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5033 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5034 }
5035
5036 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
5037
5038 /* FIXME!
5039 * Normalize endianness of structure data,
5040 * by byte-swapping all > 1 byte fields!
5041 */
5042
5043 }
5044
5045 return rc;
5046}
5047
5048/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5049/**
5050 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5051 * @ioc: Pointer to MPT_ADAPTER structure
5052 * @persist_opcode: see below
5053 *
5054 * =============================== ======================================
5055 * MPI_SAS_OP_CLEAR_NOT_PRESENT Free all persist TargetID mappings for
5056 * devices not currently present.
5057 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT Clear al persist TargetID mappings
5058 * =============================== ======================================
5059 *
5060 * NOTE: Don't use not this function during interrupt time.
5061 *
5062 * Returns 0 for success, non-zero error
5063 */
5064
5065/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5066int
5067mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5068{
5069 SasIoUnitControlRequest_t *sasIoUnitCntrReq;
5070 SasIoUnitControlReply_t *sasIoUnitCntrReply;
5071 MPT_FRAME_HDR *mf = NULL;
5072 MPIHeader_t *mpi_hdr;
5073 int ret = 0;
5074 unsigned long timeleft;
5075
5076 mutex_lock(&ioc->mptbase_cmds.mutex);
5077
5078 /* init the internal cmd struct */
5079 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5080 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5081
5082 /* insure garbage is not sent to fw */
5083 switch(persist_opcode) {
5084
5085 case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5086 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5087 break;
5088
5089 default:
5090 ret = -1;
5091 goto out;
5092 }
5093
5094 printk(KERN_DEBUG "%s: persist_opcode=%x\n",
5095 __func__, persist_opcode);
5096
5097 /* Get a MF for this command.
5098 */
5099 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5100 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5101 ret = -1;
5102 goto out;
5103 }
5104
5105 mpi_hdr = (MPIHeader_t *) mf;
5106 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5107 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5108 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5109 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5110 sasIoUnitCntrReq->Operation = persist_opcode;
5111
5112 mpt_put_msg_frame(mpt_base_index, ioc, mf);
5113 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5114 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5115 ret = -ETIME;
5116 printk(KERN_DEBUG "%s: failed\n", __func__);
5117 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5118 goto out;
5119 if (!timeleft) {
5120 printk(MYIOC_s_WARN_FMT
5121 "Issuing Reset from %s!!, doorbell=0x%08x\n",
5122 ioc->name, __func__, mpt_GetIocState(ioc, 0));
5123 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5124 mpt_free_msg_frame(ioc, mf);
5125 }
5126 goto out;
5127 }
5128
5129 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5130 ret = -1;
5131 goto out;
5132 }
5133
5134 sasIoUnitCntrReply =
5135 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5136 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5137 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5138 __func__, sasIoUnitCntrReply->IOCStatus,
5139 sasIoUnitCntrReply->IOCLogInfo);
5140 printk(KERN_DEBUG "%s: failed\n", __func__);
5141 ret = -1;
5142 } else
5143 printk(KERN_DEBUG "%s: success\n", __func__);
5144 out:
5145
5146 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5147 mutex_unlock(&ioc->mptbase_cmds.mutex);
5148 return ret;
5149}
5150
5151/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5152
5153static void
5154mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5155 MpiEventDataRaid_t * pRaidEventData)
5156{
5157 int volume;
5158 int reason;
5159 int disk;
5160 int status;
5161 int flags;
5162 int state;
5163
5164 volume = pRaidEventData->VolumeID;
5165 reason = pRaidEventData->ReasonCode;
5166 disk = pRaidEventData->PhysDiskNum;
5167 status = le32_to_cpu(pRaidEventData->SettingsStatus);
5168 flags = (status >> 0) & 0xff;
5169 state = (status >> 8) & 0xff;
5170
5171 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5172 return;
5173 }
5174
5175 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5176 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5177 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5178 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5179 ioc->name, disk, volume);
5180 } else {
5181 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5182 ioc->name, volume);
5183 }
5184
5185 switch(reason) {
5186 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5187 printk(MYIOC_s_INFO_FMT " volume has been created\n",
5188 ioc->name);
5189 break;
5190
5191 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5192
5193 printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
5194 ioc->name);
5195 break;
5196
5197 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5198 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
5199 ioc->name);
5200 break;
5201
5202 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5203 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
5204 ioc->name,
5205 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5206 ? "optimal"
5207 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5208 ? "degraded"
5209 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5210 ? "failed"
5211 : "state unknown",
5212 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5213 ? ", enabled" : "",
5214 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5215 ? ", quiesced" : "",
5216 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5217 ? ", resync in progress" : "" );
5218 break;
5219
5220 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5221 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
5222 ioc->name, disk);
5223 break;
5224
5225 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5226 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
5227 ioc->name);
5228 break;
5229
5230 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5231 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
5232 ioc->name);
5233 break;
5234
5235 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5236 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
5237 ioc->name);
5238 break;
5239
5240 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5241 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
5242 ioc->name,
5243 state == MPI_PHYSDISK0_STATUS_ONLINE
5244 ? "online"
5245 : state == MPI_PHYSDISK0_STATUS_MISSING
5246 ? "missing"
5247 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5248 ? "not compatible"
5249 : state == MPI_PHYSDISK0_STATUS_FAILED
5250 ? "failed"
5251 : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5252 ? "initializing"
5253 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5254 ? "offline requested"
5255 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5256 ? "failed requested"
5257 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5258 ? "offline"
5259 : "state unknown",
5260 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5261 ? ", out of sync" : "",
5262 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5263 ? ", quiesced" : "" );
5264 break;
5265
5266 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5267 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
5268 ioc->name, disk);
5269 break;
5270
5271 case MPI_EVENT_RAID_RC_SMART_DATA:
5272 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5273 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5274 break;
5275
5276 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5277 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
5278 ioc->name, disk);
5279 break;
5280 }
5281}
5282
5283/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5284/**
5285 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5286 * @ioc: Pointer to MPT_ADAPTER structure
5287 *
5288 * Returns: 0 for success
5289 * -ENOMEM if no memory available
5290 * -EPERM if not allowed due to ISR context
5291 * -EAGAIN if no msg frames currently available
5292 * -EFAULT for non-successful reply or no reply (timeout)
5293 */
5294static int
5295GetIoUnitPage2(MPT_ADAPTER *ioc)
5296{
5297 ConfigPageHeader_t hdr;
5298 CONFIGPARMS cfg;
5299 IOUnitPage2_t *ppage_alloc;
5300 dma_addr_t page_dma;
5301 int data_sz;
5302 int rc;
5303
5304 /* Get the page header */
5305 hdr.PageVersion = 0;
5306 hdr.PageLength = 0;
5307 hdr.PageNumber = 2;
5308 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5309 cfg.cfghdr.hdr = &hdr;
5310 cfg.physAddr = -1;
5311 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5312 cfg.dir = 0;
5313 cfg.pageAddr = 0;
5314 cfg.timeout = 0;
5315
5316 if ((rc = mpt_config(ioc, &cfg)) != 0)
5317 return rc;
5318
5319 if (hdr.PageLength == 0)
5320 return 0;
5321
5322 /* Read the config page */
5323 data_sz = hdr.PageLength * 4;
5324 rc = -ENOMEM;
5325 ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
5326 if (ppage_alloc) {
5327 memset((u8 *)ppage_alloc, 0, data_sz);
5328 cfg.physAddr = page_dma;
5329 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5330
5331 /* If Good, save data */
5332 if ((rc = mpt_config(ioc, &cfg)) == 0)
5333 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5334
5335 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
5336 }
5337
5338 return rc;
5339}
5340
5341/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5342/**
5343 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5344 * @ioc: Pointer to a Adapter Strucutre
5345 * @portnum: IOC port number
5346 *
5347 * Return: -EFAULT if read of config page header fails
5348 * or if no nvram
5349 * If read of SCSI Port Page 0 fails,
5350 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5351 * Adapter settings: async, narrow
5352 * Return 1
5353 * If read of SCSI Port Page 2 fails,
5354 * Adapter settings valid
5355 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5356 * Return 1
5357 * Else
5358 * Both valid
5359 * Return 0
5360 * CHECK - what type of locking mechanisms should be used????
5361 */
5362static int
5363mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5364{
5365 u8 *pbuf;
5366 dma_addr_t buf_dma;
5367 CONFIGPARMS cfg;
5368 ConfigPageHeader_t header;
5369 int ii;
5370 int data, rc = 0;
5371
5372 /* Allocate memory
5373 */
5374 if (!ioc->spi_data.nvram) {
5375 int sz;
5376 u8 *mem;
5377 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5378 mem = kmalloc(sz, GFP_ATOMIC);
5379 if (mem == NULL)
5380 return -EFAULT;
5381
5382 ioc->spi_data.nvram = (int *) mem;
5383
5384 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5385 ioc->name, ioc->spi_data.nvram, sz));
5386 }
5387
5388 /* Invalidate NVRAM information
5389 */
5390 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5391 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5392 }
5393
5394 /* Read SPP0 header, allocate memory, then read page.
5395 */
5396 header.PageVersion = 0;
5397 header.PageLength = 0;
5398 header.PageNumber = 0;
5399 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5400 cfg.cfghdr.hdr = &header;
5401 cfg.physAddr = -1;
5402 cfg.pageAddr = portnum;
5403 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5404 cfg.dir = 0;
5405 cfg.timeout = 0; /* use default */
5406 if (mpt_config(ioc, &cfg) != 0)
5407 return -EFAULT;
5408
5409 if (header.PageLength > 0) {
5410 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5411 if (pbuf) {
5412 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5413 cfg.physAddr = buf_dma;
5414 if (mpt_config(ioc, &cfg) != 0) {
5415 ioc->spi_data.maxBusWidth = MPT_NARROW;
5416 ioc->spi_data.maxSyncOffset = 0;
5417 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5418 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5419 rc = 1;
5420 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5421 "Unable to read PortPage0 minSyncFactor=%x\n",
5422 ioc->name, ioc->spi_data.minSyncFactor));
5423 } else {
5424 /* Save the Port Page 0 data
5425 */
5426 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
5427 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5428 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5429
5430 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5431 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5432 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5433 "noQas due to Capabilities=%x\n",
5434 ioc->name, pPP0->Capabilities));
5435 }
5436 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5437 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5438 if (data) {
5439 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5440 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5441 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5442 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5443 "PortPage0 minSyncFactor=%x\n",
5444 ioc->name, ioc->spi_data.minSyncFactor));
5445 } else {
5446 ioc->spi_data.maxSyncOffset = 0;
5447 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5448 }
5449
5450 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5451
5452 /* Update the minSyncFactor based on bus type.
5453 */
5454 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5455 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
5456
5457 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5458 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5459 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5460 "HVD or SE detected, minSyncFactor=%x\n",
5461 ioc->name, ioc->spi_data.minSyncFactor));
5462 }
5463 }
5464 }
5465 if (pbuf) {
5466 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5467 }
5468 }
5469 }
5470
5471 /* SCSI Port Page 2 - Read the header then the page.
5472 */
5473 header.PageVersion = 0;
5474 header.PageLength = 0;
5475 header.PageNumber = 2;
5476 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5477 cfg.cfghdr.hdr = &header;
5478 cfg.physAddr = -1;
5479 cfg.pageAddr = portnum;
5480 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5481 cfg.dir = 0;
5482 if (mpt_config(ioc, &cfg) != 0)
5483 return -EFAULT;
5484
5485 if (header.PageLength > 0) {
5486 /* Allocate memory and read SCSI Port Page 2
5487 */
5488 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5489 if (pbuf) {
5490 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5491 cfg.physAddr = buf_dma;
5492 if (mpt_config(ioc, &cfg) != 0) {
5493 /* Nvram data is left with INVALID mark
5494 */
5495 rc = 1;
5496 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5497
5498 /* This is an ATTO adapter, read Page2 accordingly
5499 */
5500 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
5501 ATTODeviceInfo_t *pdevice = NULL;
5502 u16 ATTOFlags;
5503
5504 /* Save the Port Page 2 data
5505 * (reformat into a 32bit quantity)
5506 */
5507 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5508 pdevice = &pPP2->DeviceSettings[ii];
5509 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5510 data = 0;
5511
5512 /* Translate ATTO device flags to LSI format
5513 */
5514 if (ATTOFlags & ATTOFLAG_DISC)
5515 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5516 if (ATTOFlags & ATTOFLAG_ID_ENB)
5517 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5518 if (ATTOFlags & ATTOFLAG_LUN_ENB)
5519 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5520 if (ATTOFlags & ATTOFLAG_TAGGED)
5521 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5522 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5523 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5524
5525 data = (data << 16) | (pdevice->Period << 8) | 10;
5526 ioc->spi_data.nvram[ii] = data;
5527 }
5528 } else {
5529 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
5530 MpiDeviceInfo_t *pdevice = NULL;
5531
5532 /*
5533 * Save "Set to Avoid SCSI Bus Resets" flag
5534 */
5535 ioc->spi_data.bus_reset =
5536 (le32_to_cpu(pPP2->PortFlags) &
5537 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5538 0 : 1 ;
5539
5540 /* Save the Port Page 2 data
5541 * (reformat into a 32bit quantity)
5542 */
5543 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5544 ioc->spi_data.PortFlags = data;
5545 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5546 pdevice = &pPP2->DeviceSettings[ii];
5547 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5548 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5549 ioc->spi_data.nvram[ii] = data;
5550 }
5551 }
5552
5553 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5554 }
5555 }
5556
5557 /* Update Adapter limits with those from NVRAM
5558 * Comment: Don't need to do this. Target performance
5559 * parameters will never exceed the adapters limits.
5560 */
5561
5562 return rc;
5563}
5564
5565/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5566/**
5567 * mpt_readScsiDevicePageHeaders - save version and length of SDP1
5568 * @ioc: Pointer to a Adapter Strucutre
5569 * @portnum: IOC port number
5570 *
5571 * Return: -EFAULT if read of config page header fails
5572 * or 0 if success.
5573 */
5574static int
5575mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5576{
5577 CONFIGPARMS cfg;
5578 ConfigPageHeader_t header;
5579
5580 /* Read the SCSI Device Page 1 header
5581 */
5582 header.PageVersion = 0;
5583 header.PageLength = 0;
5584 header.PageNumber = 1;
5585 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5586 cfg.cfghdr.hdr = &header;
5587 cfg.physAddr = -1;
5588 cfg.pageAddr = portnum;
5589 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5590 cfg.dir = 0;
5591 cfg.timeout = 0;
5592 if (mpt_config(ioc, &cfg) != 0)
5593 return -EFAULT;
5594
5595 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5596 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5597
5598 header.PageVersion = 0;
5599 header.PageLength = 0;
5600 header.PageNumber = 0;
5601 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5602 if (mpt_config(ioc, &cfg) != 0)
5603 return -EFAULT;
5604
5605 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5606 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5607
5608 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5609 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5610
5611 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5612 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5613 return 0;
5614}
5615
5616/**
5617 * mpt_inactive_raid_list_free - This clears this link list.
5618 * @ioc : pointer to per adapter structure
5619 **/
5620static void
5621mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5622{
5623 struct inactive_raid_component_info *component_info, *pNext;
5624
5625 if (list_empty(&ioc->raid_data.inactive_list))
5626 return;
5627
5628 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5629 list_for_each_entry_safe(component_info, pNext,
5630 &ioc->raid_data.inactive_list, list) {
5631 list_del(&component_info->list);
5632 kfree(component_info);
5633 }
5634 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5635}
5636
5637/**
5638 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5639 *
5640 * @ioc : pointer to per adapter structure
5641 * @channel : volume channel
5642 * @id : volume target id
5643 **/
5644static void
5645mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5646{
5647 CONFIGPARMS cfg;
5648 ConfigPageHeader_t hdr;
5649 dma_addr_t dma_handle;
5650 pRaidVolumePage0_t buffer = NULL;
5651 int i;
5652 RaidPhysDiskPage0_t phys_disk;
5653 struct inactive_raid_component_info *component_info;
5654 int handle_inactive_volumes;
5655
5656 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5657 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5658 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5659 cfg.pageAddr = (channel << 8) + id;
5660 cfg.cfghdr.hdr = &hdr;
5661 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5662
5663 if (mpt_config(ioc, &cfg) != 0)
5664 goto out;
5665
5666 if (!hdr.PageLength)
5667 goto out;
5668
5669 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5670 &dma_handle);
5671
5672 if (!buffer)
5673 goto out;
5674
5675 cfg.physAddr = dma_handle;
5676 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5677
5678 if (mpt_config(ioc, &cfg) != 0)
5679 goto out;
5680
5681 if (!buffer->NumPhysDisks)
5682 goto out;
5683
5684 handle_inactive_volumes =
5685 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5686 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5687 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5688 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5689
5690 if (!handle_inactive_volumes)
5691 goto out;
5692
5693 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5694 for (i = 0; i < buffer->NumPhysDisks; i++) {
5695 if(mpt_raid_phys_disk_pg0(ioc,
5696 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5697 continue;
5698
5699 if ((component_info = kmalloc(sizeof (*component_info),
5700 GFP_KERNEL)) == NULL)
5701 continue;
5702
5703 component_info->volumeID = id;
5704 component_info->volumeBus = channel;
5705 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5706 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5707 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5708 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5709
5710 list_add_tail(&component_info->list,
5711 &ioc->raid_data.inactive_list);
5712 }
5713 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5714
5715 out:
5716 if (buffer)
5717 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5718 dma_handle);
5719}
5720
5721/**
5722 * mpt_raid_phys_disk_pg0 - returns phys disk page zero
5723 * @ioc: Pointer to a Adapter Structure
5724 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5725 * @phys_disk: requested payload data returned
5726 *
5727 * Return:
5728 * 0 on success
5729 * -EFAULT if read of config page header fails or data pointer not NULL
5730 * -ENOMEM if pci_alloc failed
5731 **/
5732int
5733mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5734 RaidPhysDiskPage0_t *phys_disk)
5735{
5736 CONFIGPARMS cfg;
5737 ConfigPageHeader_t hdr;
5738 dma_addr_t dma_handle;
5739 pRaidPhysDiskPage0_t buffer = NULL;
5740 int rc;
5741
5742 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5743 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5744 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5745
5746 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5747 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5748 cfg.cfghdr.hdr = &hdr;
5749 cfg.physAddr = -1;
5750 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5751
5752 if (mpt_config(ioc, &cfg) != 0) {
5753 rc = -EFAULT;
5754 goto out;
5755 }
5756
5757 if (!hdr.PageLength) {
5758 rc = -EFAULT;
5759 goto out;
5760 }
5761
5762 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5763 &dma_handle);
5764
5765 if (!buffer) {
5766 rc = -ENOMEM;
5767 goto out;
5768 }
5769
5770 cfg.physAddr = dma_handle;
5771 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5772 cfg.pageAddr = phys_disk_num;
5773
5774 if (mpt_config(ioc, &cfg) != 0) {
5775 rc = -EFAULT;
5776 goto out;
5777 }
5778
5779 rc = 0;
5780 memcpy(phys_disk, buffer, sizeof(*buffer));
5781 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5782
5783 out:
5784
5785 if (buffer)
5786 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5787 dma_handle);
5788
5789 return rc;
5790}
5791
5792/**
5793 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5794 * @ioc: Pointer to a Adapter Structure
5795 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5796 *
5797 * Return:
5798 * returns number paths
5799 **/
5800int
5801mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5802{
5803 CONFIGPARMS cfg;
5804 ConfigPageHeader_t hdr;
5805 dma_addr_t dma_handle;
5806 pRaidPhysDiskPage1_t buffer = NULL;
5807 int rc;
5808
5809 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5810 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5811
5812 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5813 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5814 hdr.PageNumber = 1;
5815 cfg.cfghdr.hdr = &hdr;
5816 cfg.physAddr = -1;
5817 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5818
5819 if (mpt_config(ioc, &cfg) != 0) {
5820 rc = 0;
5821 goto out;
5822 }
5823
5824 if (!hdr.PageLength) {
5825 rc = 0;
5826 goto out;
5827 }
5828
5829 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5830 &dma_handle);
5831
5832 if (!buffer) {
5833 rc = 0;
5834 goto out;
5835 }
5836
5837 cfg.physAddr = dma_handle;
5838 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5839 cfg.pageAddr = phys_disk_num;
5840
5841 if (mpt_config(ioc, &cfg) != 0) {
5842 rc = 0;
5843 goto out;
5844 }
5845
5846 rc = buffer->NumPhysDiskPaths;
5847 out:
5848
5849 if (buffer)
5850 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5851 dma_handle);
5852
5853 return rc;
5854}
5855EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5856
5857/**
5858 * mpt_raid_phys_disk_pg1 - returns phys disk page 1
5859 * @ioc: Pointer to a Adapter Structure
5860 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5861 * @phys_disk: requested payload data returned
5862 *
5863 * Return:
5864 * 0 on success
5865 * -EFAULT if read of config page header fails or data pointer not NULL
5866 * -ENOMEM if pci_alloc failed
5867 **/
5868int
5869mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5870 RaidPhysDiskPage1_t *phys_disk)
5871{
5872 CONFIGPARMS cfg;
5873 ConfigPageHeader_t hdr;
5874 dma_addr_t dma_handle;
5875 pRaidPhysDiskPage1_t buffer = NULL;
5876 int rc;
5877 int i;
5878 __le64 sas_address;
5879
5880 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5881 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5882 rc = 0;
5883
5884 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5885 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5886 hdr.PageNumber = 1;
5887 cfg.cfghdr.hdr = &hdr;
5888 cfg.physAddr = -1;
5889 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5890
5891 if (mpt_config(ioc, &cfg) != 0) {
5892 rc = -EFAULT;
5893 goto out;
5894 }
5895
5896 if (!hdr.PageLength) {
5897 rc = -EFAULT;
5898 goto out;
5899 }
5900
5901 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5902 &dma_handle);
5903
5904 if (!buffer) {
5905 rc = -ENOMEM;
5906 goto out;
5907 }
5908
5909 cfg.physAddr = dma_handle;
5910 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5911 cfg.pageAddr = phys_disk_num;
5912
5913 if (mpt_config(ioc, &cfg) != 0) {
5914 rc = -EFAULT;
5915 goto out;
5916 }
5917
5918 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5919 phys_disk->PhysDiskNum = phys_disk_num;
5920 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5921 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5922 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5923 phys_disk->Path[i].OwnerIdentifier =
5924 buffer->Path[i].OwnerIdentifier;
5925 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5926 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5927 sas_address = le64_to_cpu(sas_address);
5928 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5929 memcpy(&sas_address,
5930 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5931 sas_address = le64_to_cpu(sas_address);
5932 memcpy(&phys_disk->Path[i].OwnerWWID,
5933 &sas_address, sizeof(__le64));
5934 }
5935
5936 out:
5937
5938 if (buffer)
5939 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5940 dma_handle);
5941
5942 return rc;
5943}
5944EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5945
5946
5947/**
5948 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5949 * @ioc: Pointer to a Adapter Strucutre
5950 *
5951 * Return:
5952 * 0 on success
5953 * -EFAULT if read of config page header fails or data pointer not NULL
5954 * -ENOMEM if pci_alloc failed
5955 **/
5956int
5957mpt_findImVolumes(MPT_ADAPTER *ioc)
5958{
5959 IOCPage2_t *pIoc2;
5960 u8 *mem;
5961 dma_addr_t ioc2_dma;
5962 CONFIGPARMS cfg;
5963 ConfigPageHeader_t header;
5964 int rc = 0;
5965 int iocpage2sz;
5966 int i;
5967
5968 if (!ioc->ir_firmware)
5969 return 0;
5970
5971 /* Free the old page
5972 */
5973 kfree(ioc->raid_data.pIocPg2);
5974 ioc->raid_data.pIocPg2 = NULL;
5975 mpt_inactive_raid_list_free(ioc);
5976
5977 /* Read IOCP2 header then the page.
5978 */
5979 header.PageVersion = 0;
5980 header.PageLength = 0;
5981 header.PageNumber = 2;
5982 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5983 cfg.cfghdr.hdr = &header;
5984 cfg.physAddr = -1;
5985 cfg.pageAddr = 0;
5986 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5987 cfg.dir = 0;
5988 cfg.timeout = 0;
5989 if (mpt_config(ioc, &cfg) != 0)
5990 return -EFAULT;
5991
5992 if (header.PageLength == 0)
5993 return -EFAULT;
5994
5995 iocpage2sz = header.PageLength * 4;
5996 pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
5997 if (!pIoc2)
5998 return -ENOMEM;
5999
6000 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6001 cfg.physAddr = ioc2_dma;
6002 if (mpt_config(ioc, &cfg) != 0)
6003 goto out;
6004
6005 mem = kmemdup(pIoc2, iocpage2sz, GFP_KERNEL);
6006 if (!mem) {
6007 rc = -ENOMEM;
6008 goto out;
6009 }
6010
6011 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6012
6013 mpt_read_ioc_pg_3(ioc);
6014
6015 for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6016 mpt_inactive_raid_volumes(ioc,
6017 pIoc2->RaidVolume[i].VolumeBus,
6018 pIoc2->RaidVolume[i].VolumeID);
6019
6020 out:
6021 pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
6022
6023 return rc;
6024}
6025
6026static int
6027mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6028{
6029 IOCPage3_t *pIoc3;
6030 u8 *mem;
6031 CONFIGPARMS cfg;
6032 ConfigPageHeader_t header;
6033 dma_addr_t ioc3_dma;
6034 int iocpage3sz = 0;
6035
6036 /* Free the old page
6037 */
6038 kfree(ioc->raid_data.pIocPg3);
6039 ioc->raid_data.pIocPg3 = NULL;
6040
6041 /* There is at least one physical disk.
6042 * Read and save IOC Page 3
6043 */
6044 header.PageVersion = 0;
6045 header.PageLength = 0;
6046 header.PageNumber = 3;
6047 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6048 cfg.cfghdr.hdr = &header;
6049 cfg.physAddr = -1;
6050 cfg.pageAddr = 0;
6051 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6052 cfg.dir = 0;
6053 cfg.timeout = 0;
6054 if (mpt_config(ioc, &cfg) != 0)
6055 return 0;
6056
6057 if (header.PageLength == 0)
6058 return 0;
6059
6060 /* Read Header good, alloc memory
6061 */
6062 iocpage3sz = header.PageLength * 4;
6063 pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
6064 if (!pIoc3)
6065 return 0;
6066
6067 /* Read the Page and save the data
6068 * into malloc'd memory.
6069 */
6070 cfg.physAddr = ioc3_dma;
6071 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6072 if (mpt_config(ioc, &cfg) == 0) {
6073 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6074 if (mem) {
6075 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6076 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6077 }
6078 }
6079
6080 pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
6081
6082 return 0;
6083}
6084
6085static void
6086mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6087{
6088 IOCPage4_t *pIoc4;
6089 CONFIGPARMS cfg;
6090 ConfigPageHeader_t header;
6091 dma_addr_t ioc4_dma;
6092 int iocpage4sz;
6093
6094 /* Read and save IOC Page 4
6095 */
6096 header.PageVersion = 0;
6097 header.PageLength = 0;
6098 header.PageNumber = 4;
6099 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6100 cfg.cfghdr.hdr = &header;
6101 cfg.physAddr = -1;
6102 cfg.pageAddr = 0;
6103 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6104 cfg.dir = 0;
6105 cfg.timeout = 0;
6106 if (mpt_config(ioc, &cfg) != 0)
6107 return;
6108
6109 if (header.PageLength == 0)
6110 return;
6111
6112 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6113 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6114 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
6115 if (!pIoc4)
6116 return;
6117 ioc->alloc_total += iocpage4sz;
6118 } else {
6119 ioc4_dma = ioc->spi_data.IocPg4_dma;
6120 iocpage4sz = ioc->spi_data.IocPg4Sz;
6121 }
6122
6123 /* Read the Page into dma memory.
6124 */
6125 cfg.physAddr = ioc4_dma;
6126 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6127 if (mpt_config(ioc, &cfg) == 0) {
6128 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6129 ioc->spi_data.IocPg4_dma = ioc4_dma;
6130 ioc->spi_data.IocPg4Sz = iocpage4sz;
6131 } else {
6132 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
6133 ioc->spi_data.pIocPg4 = NULL;
6134 ioc->alloc_total -= iocpage4sz;
6135 }
6136}
6137
6138static void
6139mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6140{
6141 IOCPage1_t *pIoc1;
6142 CONFIGPARMS cfg;
6143 ConfigPageHeader_t header;
6144 dma_addr_t ioc1_dma;
6145 int iocpage1sz = 0;
6146 u32 tmp;
6147
6148 /* Check the Coalescing Timeout in IOC Page 1
6149 */
6150 header.PageVersion = 0;
6151 header.PageLength = 0;
6152 header.PageNumber = 1;
6153 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6154 cfg.cfghdr.hdr = &header;
6155 cfg.physAddr = -1;
6156 cfg.pageAddr = 0;
6157 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6158 cfg.dir = 0;
6159 cfg.timeout = 0;
6160 if (mpt_config(ioc, &cfg) != 0)
6161 return;
6162
6163 if (header.PageLength == 0)
6164 return;
6165
6166 /* Read Header good, alloc memory
6167 */
6168 iocpage1sz = header.PageLength * 4;
6169 pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
6170 if (!pIoc1)
6171 return;
6172
6173 /* Read the Page and check coalescing timeout
6174 */
6175 cfg.physAddr = ioc1_dma;
6176 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6177 if (mpt_config(ioc, &cfg) == 0) {
6178
6179 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6180 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6181 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6182
6183 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6184 ioc->name, tmp));
6185
6186 if (tmp > MPT_COALESCING_TIMEOUT) {
6187 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6188
6189 /* Write NVRAM and current
6190 */
6191 cfg.dir = 1;
6192 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6193 if (mpt_config(ioc, &cfg) == 0) {
6194 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6195 ioc->name, MPT_COALESCING_TIMEOUT));
6196
6197 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6198 if (mpt_config(ioc, &cfg) == 0) {
6199 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6200 "Reset NVRAM Coalescing Timeout to = %d\n",
6201 ioc->name, MPT_COALESCING_TIMEOUT));
6202 } else {
6203 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6204 "Reset NVRAM Coalescing Timeout Failed\n",
6205 ioc->name));
6206 }
6207
6208 } else {
6209 dprintk(ioc, printk(MYIOC_s_WARN_FMT
6210 "Reset of Current Coalescing Timeout Failed!\n",
6211 ioc->name));
6212 }
6213 }
6214
6215 } else {
6216 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6217 }
6218 }
6219
6220 pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
6221
6222 return;
6223}
6224
6225static void
6226mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6227{
6228 CONFIGPARMS cfg;
6229 ConfigPageHeader_t hdr;
6230 dma_addr_t buf_dma;
6231 ManufacturingPage0_t *pbuf = NULL;
6232
6233 memset(&cfg, 0 , sizeof(CONFIGPARMS));
6234 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6235
6236 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6237 cfg.cfghdr.hdr = &hdr;
6238 cfg.physAddr = -1;
6239 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6240 cfg.timeout = 10;
6241
6242 if (mpt_config(ioc, &cfg) != 0)
6243 goto out;
6244
6245 if (!cfg.cfghdr.hdr->PageLength)
6246 goto out;
6247
6248 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6249 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
6250 if (!pbuf)
6251 goto out;
6252
6253 cfg.physAddr = buf_dma;
6254
6255 if (mpt_config(ioc, &cfg) != 0)
6256 goto out;
6257
6258 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6259 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6260 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6261
6262out:
6263
6264 if (pbuf)
6265 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
6266}
6267
6268/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6269/**
6270 * SendEventNotification - Send EventNotification (on or off) request to adapter
6271 * @ioc: Pointer to MPT_ADAPTER structure
6272 * @EvSwitch: Event switch flags
6273 * @sleepFlag: Specifies whether the process can sleep
6274 */
6275static int
6276SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6277{
6278 EventNotification_t evn;
6279 MPIDefaultReply_t reply_buf;
6280
6281 memset(&evn, 0, sizeof(EventNotification_t));
6282 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6283
6284 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6285 evn.Switch = EvSwitch;
6286 evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6287
6288 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6289 "Sending EventNotification (%d) request %p\n",
6290 ioc->name, EvSwitch, &evn));
6291
6292 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6293 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6294 sleepFlag);
6295}
6296
6297/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6298/**
6299 * SendEventAck - Send EventAck request to MPT adapter.
6300 * @ioc: Pointer to MPT_ADAPTER structure
6301 * @evnp: Pointer to original EventNotification request
6302 */
6303static int
6304SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6305{
6306 EventAck_t *pAck;
6307
6308 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6309 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6310 ioc->name, __func__));
6311 return -1;
6312 }
6313
6314 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6315
6316 pAck->Function = MPI_FUNCTION_EVENT_ACK;
6317 pAck->ChainOffset = 0;
6318 pAck->Reserved[0] = pAck->Reserved[1] = 0;
6319 pAck->MsgFlags = 0;
6320 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6321 pAck->Event = evnp->Event;
6322 pAck->EventContext = evnp->EventContext;
6323
6324 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6325
6326 return 0;
6327}
6328
6329/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6330/**
6331 * mpt_config - Generic function to issue config message
6332 * @ioc: Pointer to an adapter structure
6333 * @pCfg: Pointer to a configuration structure. Struct contains
6334 * action, page address, direction, physical address
6335 * and pointer to a configuration page header
6336 * Page header is updated.
6337 *
6338 * Returns 0 for success
6339 * -EPERM if not allowed due to ISR context
6340 * -EAGAIN if no msg frames currently available
6341 * -EFAULT for non-successful reply or no reply (timeout)
6342 */
6343int
6344mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6345{
6346 Config_t *pReq;
6347 ConfigReply_t *pReply;
6348 ConfigExtendedPageHeader_t *pExtHdr = NULL;
6349 MPT_FRAME_HDR *mf;
6350 int ii;
6351 int flagsLength;
6352 long timeout;
6353 int ret;
6354 u8 page_type = 0, extend_page;
6355 unsigned long timeleft;
6356 unsigned long flags;
6357 int in_isr;
6358 u8 issue_hard_reset = 0;
6359 u8 retry_count = 0;
6360
6361 /* Prevent calling wait_event() (below), if caller happens
6362 * to be in ISR context, because that is fatal!
6363 */
6364 in_isr = in_interrupt();
6365 if (in_isr) {
6366 dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
6367 ioc->name));
6368 return -EPERM;
6369 }
6370
6371 /* don't send a config page during diag reset */
6372 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6373 if (ioc->ioc_reset_in_progress) {
6374 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6375 "%s: busy with host reset\n", ioc->name, __func__));
6376 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6377 return -EBUSY;
6378 }
6379 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6380
6381 /* don't send if no chance of success */
6382 if (!ioc->active ||
6383 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6384 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6385 "%s: ioc not operational, %d, %xh\n",
6386 ioc->name, __func__, ioc->active,
6387 mpt_GetIocState(ioc, 0)));
6388 return -EFAULT;
6389 }
6390
6391 retry_config:
6392 mutex_lock(&ioc->mptbase_cmds.mutex);
6393 /* init the internal cmd struct */
6394 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6395 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6396
6397 /* Get and Populate a free Frame
6398 */
6399 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6400 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6401 "mpt_config: no msg frames!\n", ioc->name));
6402 ret = -EAGAIN;
6403 goto out;
6404 }
6405
6406 pReq = (Config_t *)mf;
6407 pReq->Action = pCfg->action;
6408 pReq->Reserved = 0;
6409 pReq->ChainOffset = 0;
6410 pReq->Function = MPI_FUNCTION_CONFIG;
6411
6412 /* Assume page type is not extended and clear "reserved" fields. */
6413 pReq->ExtPageLength = 0;
6414 pReq->ExtPageType = 0;
6415 pReq->MsgFlags = 0;
6416
6417 for (ii=0; ii < 8; ii++)
6418 pReq->Reserved2[ii] = 0;
6419
6420 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6421 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6422 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6423 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6424
6425 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6426 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6427 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6428 pReq->ExtPageType = pExtHdr->ExtPageType;
6429 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6430
6431 /* Page Length must be treated as a reserved field for the
6432 * extended header.
6433 */
6434 pReq->Header.PageLength = 0;
6435 }
6436
6437 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6438
6439 /* Add a SGE to the config request.
6440 */
6441 if (pCfg->dir)
6442 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6443 else
6444 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6445
6446 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6447 MPI_CONFIG_PAGETYPE_EXTENDED) {
6448 flagsLength |= pExtHdr->ExtPageLength * 4;
6449 page_type = pReq->ExtPageType;
6450 extend_page = 1;
6451 } else {
6452 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6453 page_type = pReq->Header.PageType;
6454 extend_page = 0;
6455 }
6456
6457 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6458 "Sending Config request type 0x%x, page 0x%x and action %d\n",
6459 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6460
6461 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6462 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6463 mpt_put_msg_frame(mpt_base_index, ioc, mf);
6464 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6465 timeout);
6466 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6467 ret = -ETIME;
6468 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6469 "Failed Sending Config request type 0x%x, page 0x%x,"
6470 " action %d, status %xh, time left %ld\n\n",
6471 ioc->name, page_type, pReq->Header.PageNumber,
6472 pReq->Action, ioc->mptbase_cmds.status, timeleft));
6473 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6474 goto out;
6475 if (!timeleft) {
6476 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6477 if (ioc->ioc_reset_in_progress) {
6478 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6479 flags);
6480 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6481 " progress mpt_config timed out.!!\n",
6482 __func__, ioc->name);
6483 mutex_unlock(&ioc->mptbase_cmds.mutex);
6484 return -EFAULT;
6485 }
6486 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6487 issue_hard_reset = 1;
6488 }
6489 goto out;
6490 }
6491
6492 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6493 ret = -1;
6494 goto out;
6495 }
6496 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6497 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6498 if (ret == MPI_IOCSTATUS_SUCCESS) {
6499 if (extend_page) {
6500 pCfg->cfghdr.ehdr->ExtPageLength =
6501 le16_to_cpu(pReply->ExtPageLength);
6502 pCfg->cfghdr.ehdr->ExtPageType =
6503 pReply->ExtPageType;
6504 }
6505 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6506 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6507 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6508 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6509
6510 }
6511
6512 if (retry_count)
6513 printk(MYIOC_s_INFO_FMT "Retry completed "
6514 "ret=0x%x timeleft=%ld\n",
6515 ioc->name, ret, timeleft);
6516
6517 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6518 ret, le32_to_cpu(pReply->IOCLogInfo)));
6519
6520out:
6521
6522 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6523 mutex_unlock(&ioc->mptbase_cmds.mutex);
6524 if (issue_hard_reset) {
6525 issue_hard_reset = 0;
6526 printk(MYIOC_s_WARN_FMT
6527 "Issuing Reset from %s!!, doorbell=0x%08x\n",
6528 ioc->name, __func__, mpt_GetIocState(ioc, 0));
6529 if (retry_count == 0) {
6530 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6531 retry_count++;
6532 } else
6533 mpt_HardResetHandler(ioc, CAN_SLEEP);
6534
6535 mpt_free_msg_frame(ioc, mf);
6536 /* attempt one retry for a timed out command */
6537 if (retry_count < 2) {
6538 printk(MYIOC_s_INFO_FMT
6539 "Attempting Retry Config request"
6540 " type 0x%x, page 0x%x,"
6541 " action %d\n", ioc->name, page_type,
6542 pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6543 retry_count++;
6544 goto retry_config;
6545 }
6546 }
6547 return ret;
6548
6549}
6550
6551/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6552/**
6553 * mpt_ioc_reset - Base cleanup for hard reset
6554 * @ioc: Pointer to the adapter structure
6555 * @reset_phase: Indicates pre- or post-reset functionality
6556 *
6557 * Remark: Frees resources with internally generated commands.
6558 */
6559static int
6560mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6561{
6562 switch (reset_phase) {
6563 case MPT_IOC_SETUP_RESET:
6564 ioc->taskmgmt_quiesce_io = 1;
6565 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6566 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6567 break;
6568 case MPT_IOC_PRE_RESET:
6569 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6570 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6571 break;
6572 case MPT_IOC_POST_RESET:
6573 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6574 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
6575/* wake up mptbase_cmds */
6576 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6577 ioc->mptbase_cmds.status |=
6578 MPT_MGMT_STATUS_DID_IOCRESET;
6579 complete(&ioc->mptbase_cmds.done);
6580 }
6581/* wake up taskmgmt_cmds */
6582 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6583 ioc->taskmgmt_cmds.status |=
6584 MPT_MGMT_STATUS_DID_IOCRESET;
6585 complete(&ioc->taskmgmt_cmds.done);
6586 }
6587 break;
6588 default:
6589 break;
6590 }
6591
6592 return 1; /* currently means nothing really */
6593}
6594
6595
6596#ifdef CONFIG_PROC_FS /* { */
6597/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6598/*
6599 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6600 */
6601/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6602/**
6603 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6604 *
6605 * Returns 0 for success, non-zero for failure.
6606 */
6607static int
6608procmpt_create(void)
6609{
6610 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6611 if (mpt_proc_root_dir == NULL)
6612 return -ENOTDIR;
6613
6614 proc_create_single("summary", S_IRUGO, mpt_proc_root_dir,
6615 mpt_summary_proc_show);
6616 proc_create_single("version", S_IRUGO, mpt_proc_root_dir,
6617 mpt_version_proc_show);
6618 return 0;
6619}
6620
6621/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6622/**
6623 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6624 *
6625 * Returns 0 for success, non-zero for failure.
6626 */
6627static void
6628procmpt_destroy(void)
6629{
6630 remove_proc_entry("version", mpt_proc_root_dir);
6631 remove_proc_entry("summary", mpt_proc_root_dir);
6632 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6633}
6634
6635/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6636/*
6637 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6638 */
6639static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6640
6641static int mpt_summary_proc_show(struct seq_file *m, void *v)
6642{
6643 MPT_ADAPTER *ioc = m->private;
6644
6645 if (ioc) {
6646 seq_mpt_print_ioc_summary(ioc, m, 1);
6647 } else {
6648 list_for_each_entry(ioc, &ioc_list, list) {
6649 seq_mpt_print_ioc_summary(ioc, m, 1);
6650 }
6651 }
6652
6653 return 0;
6654}
6655
6656static int mpt_version_proc_show(struct seq_file *m, void *v)
6657{
6658 u8 cb_idx;
6659 int scsi, fc, sas, lan, ctl, targ, dmp;
6660 char *drvname;
6661
6662 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6663 seq_printf(m, " Fusion MPT base driver\n");
6664
6665 scsi = fc = sas = lan = ctl = targ = dmp = 0;
6666 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6667 drvname = NULL;
6668 if (MptCallbacks[cb_idx]) {
6669 switch (MptDriverClass[cb_idx]) {
6670 case MPTSPI_DRIVER:
6671 if (!scsi++) drvname = "SPI host";
6672 break;
6673 case MPTFC_DRIVER:
6674 if (!fc++) drvname = "FC host";
6675 break;
6676 case MPTSAS_DRIVER:
6677 if (!sas++) drvname = "SAS host";
6678 break;
6679 case MPTLAN_DRIVER:
6680 if (!lan++) drvname = "LAN";
6681 break;
6682 case MPTSTM_DRIVER:
6683 if (!targ++) drvname = "SCSI target";
6684 break;
6685 case MPTCTL_DRIVER:
6686 if (!ctl++) drvname = "ioctl";
6687 break;
6688 }
6689
6690 if (drvname)
6691 seq_printf(m, " Fusion MPT %s driver\n", drvname);
6692 }
6693 }
6694
6695 return 0;
6696}
6697
6698static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6699{
6700 MPT_ADAPTER *ioc = m->private;
6701 char expVer[32];
6702 int sz;
6703 int p;
6704
6705 mpt_get_fw_exp_ver(expVer, ioc);
6706
6707 seq_printf(m, "%s:", ioc->name);
6708 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6709 seq_printf(m, " (f/w download boot flag set)");
6710// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6711// seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
6712
6713 seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
6714 ioc->facts.ProductID,
6715 ioc->prod_name);
6716 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6717 if (ioc->facts.FWImageSize)
6718 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6719 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6720 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6721 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
6722
6723 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
6724 ioc->facts.CurrentHostMfaHighAddr);
6725 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
6726 ioc->facts.CurrentSenseBufferHighAddr);
6727
6728 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6729 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6730
6731 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6732 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6733 /*
6734 * Rounding UP to nearest 4-kB boundary here...
6735 */
6736 sz = (ioc->req_sz * ioc->req_depth) + 128;
6737 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6738 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6739 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6740 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
6741 4*ioc->facts.RequestFrameSize,
6742 ioc->facts.GlobalCredits);
6743
6744 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
6745 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6746 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6747 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6748 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6749 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
6750 ioc->facts.CurReplyFrameSize,
6751 ioc->facts.ReplyQueueDepth);
6752
6753 seq_printf(m, " MaxDevices = %d\n",
6754 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6755 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
6756
6757 /* per-port info */
6758 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6759 seq_printf(m, " PortNumber = %d (of %d)\n",
6760 p+1,
6761 ioc->facts.NumberOfPorts);
6762 if (ioc->bus_type == FC) {
6763 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6764 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6765 seq_printf(m, " LanAddr = %pMR\n", a);
6766 }
6767 seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
6768 ioc->fc_port_page0[p].WWNN.High,
6769 ioc->fc_port_page0[p].WWNN.Low,
6770 ioc->fc_port_page0[p].WWPN.High,
6771 ioc->fc_port_page0[p].WWPN.Low);
6772 }
6773 }
6774
6775 return 0;
6776}
6777#endif /* CONFIG_PROC_FS } */
6778
6779/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6780static void
6781mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6782{
6783 buf[0] ='\0';
6784 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6785 sprintf(buf, " (Exp %02d%02d)",
6786 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
6787 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
6788
6789 /* insider hack! */
6790 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6791 strcat(buf, " [MDBG]");
6792 }
6793}
6794
6795/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6796/**
6797 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6798 * @ioc: Pointer to MPT_ADAPTER structure
6799 * @buffer: Pointer to buffer where IOC summary info should be written
6800 * @size: Pointer to number of bytes we wrote (set by this routine)
6801 * @len: Offset at which to start writing in buffer
6802 * @showlan: Display LAN stuff?
6803 *
6804 * This routine writes (english readable) ASCII text, which represents
6805 * a summary of IOC information, to a buffer.
6806 */
6807void
6808mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6809{
6810 char expVer[32];
6811 int y;
6812
6813 mpt_get_fw_exp_ver(expVer, ioc);
6814
6815 /*
6816 * Shorter summary of attached ioc's...
6817 */
6818 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6819 ioc->name,
6820 ioc->prod_name,
6821 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6822 ioc->facts.FWVersion.Word,
6823 expVer,
6824 ioc->facts.NumberOfPorts,
6825 ioc->req_depth);
6826
6827 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6828 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6829 y += sprintf(buffer+len+y, ", LanAddr=%pMR", a);
6830 }
6831
6832 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6833
6834 if (!ioc->active)
6835 y += sprintf(buffer+len+y, " (disabled)");
6836
6837 y += sprintf(buffer+len+y, "\n");
6838
6839 *size = y;
6840}
6841
6842#ifdef CONFIG_PROC_FS
6843static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6844{
6845 char expVer[32];
6846
6847 mpt_get_fw_exp_ver(expVer, ioc);
6848
6849 /*
6850 * Shorter summary of attached ioc's...
6851 */
6852 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6853 ioc->name,
6854 ioc->prod_name,
6855 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6856 ioc->facts.FWVersion.Word,
6857 expVer,
6858 ioc->facts.NumberOfPorts,
6859 ioc->req_depth);
6860
6861 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6862 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6863 seq_printf(m, ", LanAddr=%pMR", a);
6864 }
6865
6866 seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6867
6868 if (!ioc->active)
6869 seq_printf(m, " (disabled)");
6870
6871 seq_putc(m, '\n');
6872}
6873#endif
6874
6875/**
6876 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6877 * @ioc: Pointer to MPT_ADAPTER structure
6878 *
6879 * Returns 0 for SUCCESS or -1 if FAILED.
6880 *
6881 * If -1 is return, then it was not possible to set the flags
6882 **/
6883int
6884mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6885{
6886 unsigned long flags;
6887 int retval;
6888
6889 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6890 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6891 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6892 retval = -1;
6893 goto out;
6894 }
6895 retval = 0;
6896 ioc->taskmgmt_in_progress = 1;
6897 ioc->taskmgmt_quiesce_io = 1;
6898 if (ioc->alt_ioc) {
6899 ioc->alt_ioc->taskmgmt_in_progress = 1;
6900 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6901 }
6902 out:
6903 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6904 return retval;
6905}
6906EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6907
6908/**
6909 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6910 * @ioc: Pointer to MPT_ADAPTER structure
6911 *
6912 **/
6913void
6914mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6915{
6916 unsigned long flags;
6917
6918 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6919 ioc->taskmgmt_in_progress = 0;
6920 ioc->taskmgmt_quiesce_io = 0;
6921 if (ioc->alt_ioc) {
6922 ioc->alt_ioc->taskmgmt_in_progress = 0;
6923 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6924 }
6925 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6926}
6927EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6928
6929
6930/**
6931 * mpt_halt_firmware - Halts the firmware if it is operational and panic
6932 * the kernel
6933 * @ioc: Pointer to MPT_ADAPTER structure
6934 *
6935 **/
6936void
6937mpt_halt_firmware(MPT_ADAPTER *ioc)
6938{
6939 u32 ioc_raw_state;
6940
6941 ioc_raw_state = mpt_GetIocState(ioc, 0);
6942
6943 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6944 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6945 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6946 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6947 ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6948 } else {
6949 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6950 panic("%s: Firmware is halted due to command timeout\n",
6951 ioc->name);
6952 }
6953}
6954EXPORT_SYMBOL(mpt_halt_firmware);
6955
6956/**
6957 * mpt_SoftResetHandler - Issues a less expensive reset
6958 * @ioc: Pointer to MPT_ADAPTER structure
6959 * @sleepFlag: Indicates if sleep or schedule must be called.
6960 *
6961 * Returns 0 for SUCCESS or -1 if FAILED.
6962 *
6963 * Message Unit Reset - instructs the IOC to reset the Reply Post and
6964 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
6965 * All posted buffers are freed, and event notification is turned off.
6966 * IOC doesn't reply to any outstanding request. This will transfer IOC
6967 * to READY state.
6968 **/
6969static int
6970mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
6971{
6972 int rc;
6973 int ii;
6974 u8 cb_idx;
6975 unsigned long flags;
6976 u32 ioc_state;
6977 unsigned long time_count;
6978
6979 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
6980 ioc->name));
6981
6982 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
6983
6984 if (mpt_fwfault_debug)
6985 mpt_halt_firmware(ioc);
6986
6987 if (ioc_state == MPI_IOC_STATE_FAULT ||
6988 ioc_state == MPI_IOC_STATE_RESET) {
6989 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6990 "skipping, either in FAULT or RESET state!\n", ioc->name));
6991 return -1;
6992 }
6993
6994 if (ioc->bus_type == FC) {
6995 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6996 "skipping, because the bus type is FC!\n", ioc->name));
6997 return -1;
6998 }
6999
7000 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7001 if (ioc->ioc_reset_in_progress) {
7002 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7003 return -1;
7004 }
7005 ioc->ioc_reset_in_progress = 1;
7006 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7007
7008 rc = -1;
7009
7010 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7011 if (MptResetHandlers[cb_idx])
7012 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7013 }
7014
7015 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7016 if (ioc->taskmgmt_in_progress) {
7017 ioc->ioc_reset_in_progress = 0;
7018 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7019 return -1;
7020 }
7021 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7022 /* Disable reply interrupts (also blocks FreeQ) */
7023 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7024 ioc->active = 0;
7025 time_count = jiffies;
7026
7027 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7028
7029 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7030 if (MptResetHandlers[cb_idx])
7031 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7032 }
7033
7034 if (rc)
7035 goto out;
7036
7037 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7038 if (ioc_state != MPI_IOC_STATE_READY)
7039 goto out;
7040
7041 for (ii = 0; ii < 5; ii++) {
7042 /* Get IOC facts! Allow 5 retries */
7043 rc = GetIocFacts(ioc, sleepFlag,
7044 MPT_HOSTEVENT_IOC_RECOVER);
7045 if (rc == 0)
7046 break;
7047 if (sleepFlag == CAN_SLEEP)
7048 msleep(100);
7049 else
7050 mdelay(100);
7051 }
7052 if (ii == 5)
7053 goto out;
7054
7055 rc = PrimeIocFifos(ioc);
7056 if (rc != 0)
7057 goto out;
7058
7059 rc = SendIocInit(ioc, sleepFlag);
7060 if (rc != 0)
7061 goto out;
7062
7063 rc = SendEventNotification(ioc, 1, sleepFlag);
7064 if (rc != 0)
7065 goto out;
7066
7067 if (ioc->hard_resets < -1)
7068 ioc->hard_resets++;
7069
7070 /*
7071 * At this point, we know soft reset succeeded.
7072 */
7073
7074 ioc->active = 1;
7075 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7076
7077 out:
7078 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7079 ioc->ioc_reset_in_progress = 0;
7080 ioc->taskmgmt_quiesce_io = 0;
7081 ioc->taskmgmt_in_progress = 0;
7082 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7083
7084 if (ioc->active) { /* otherwise, hard reset coming */
7085 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7086 if (MptResetHandlers[cb_idx])
7087 mpt_signal_reset(cb_idx, ioc,
7088 MPT_IOC_POST_RESET);
7089 }
7090 }
7091
7092 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7093 "SoftResetHandler: completed (%d seconds): %s\n",
7094 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7095 ((rc == 0) ? "SUCCESS" : "FAILED")));
7096
7097 return rc;
7098}
7099
7100/**
7101 * mpt_Soft_Hard_ResetHandler - Try less expensive reset
7102 * @ioc: Pointer to MPT_ADAPTER structure
7103 * @sleepFlag: Indicates if sleep or schedule must be called.
7104 *
7105 * Returns 0 for SUCCESS or -1 if FAILED.
7106 * Try for softreset first, only if it fails go for expensive
7107 * HardReset.
7108 **/
7109int
7110mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7111 int ret = -1;
7112
7113 ret = mpt_SoftResetHandler(ioc, sleepFlag);
7114 if (ret == 0)
7115 return ret;
7116 ret = mpt_HardResetHandler(ioc, sleepFlag);
7117 return ret;
7118}
7119EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7120
7121/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7122/*
7123 * Reset Handling
7124 */
7125/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7126/**
7127 * mpt_HardResetHandler - Generic reset handler
7128 * @ioc: Pointer to MPT_ADAPTER structure
7129 * @sleepFlag: Indicates if sleep or schedule must be called.
7130 *
7131 * Issues SCSI Task Management call based on input arg values.
7132 * If TaskMgmt fails, returns associated SCSI request.
7133 *
7134 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7135 * or a non-interrupt thread. In the former, must not call schedule().
7136 *
7137 * Note: A return of -1 is a FATAL error case, as it means a
7138 * FW reload/initialization failed.
7139 *
7140 * Returns 0 for SUCCESS or -1 if FAILED.
7141 */
7142int
7143mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7144{
7145 int rc;
7146 u8 cb_idx;
7147 unsigned long flags;
7148 unsigned long time_count;
7149
7150 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7151#ifdef MFCNT
7152 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7153 printk("MF count 0x%x !\n", ioc->mfcnt);
7154#endif
7155 if (mpt_fwfault_debug)
7156 mpt_halt_firmware(ioc);
7157
7158 /* Reset the adapter. Prevent more than 1 call to
7159 * mpt_do_ioc_recovery at any instant in time.
7160 */
7161 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7162 if (ioc->ioc_reset_in_progress) {
7163 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7164 ioc->wait_on_reset_completion = 1;
7165 do {
7166 ssleep(1);
7167 } while (ioc->ioc_reset_in_progress == 1);
7168 ioc->wait_on_reset_completion = 0;
7169 return ioc->reset_status;
7170 }
7171 if (ioc->wait_on_reset_completion) {
7172 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7173 rc = 0;
7174 time_count = jiffies;
7175 goto exit;
7176 }
7177 ioc->ioc_reset_in_progress = 1;
7178 if (ioc->alt_ioc)
7179 ioc->alt_ioc->ioc_reset_in_progress = 1;
7180 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7181
7182
7183 /* The SCSI driver needs to adjust timeouts on all current
7184 * commands prior to the diagnostic reset being issued.
7185 * Prevents timeouts occurring during a diagnostic reset...very bad.
7186 * For all other protocol drivers, this is a no-op.
7187 */
7188 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7189 if (MptResetHandlers[cb_idx]) {
7190 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7191 if (ioc->alt_ioc)
7192 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7193 MPT_IOC_SETUP_RESET);
7194 }
7195 }
7196
7197 time_count = jiffies;
7198 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7199 if (rc != 0) {
7200 printk(KERN_WARNING MYNAM
7201 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7202 rc, ioc->name, mpt_GetIocState(ioc, 0));
7203 } else {
7204 if (ioc->hard_resets < -1)
7205 ioc->hard_resets++;
7206 }
7207
7208 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7209 ioc->ioc_reset_in_progress = 0;
7210 ioc->taskmgmt_quiesce_io = 0;
7211 ioc->taskmgmt_in_progress = 0;
7212 ioc->reset_status = rc;
7213 if (ioc->alt_ioc) {
7214 ioc->alt_ioc->ioc_reset_in_progress = 0;
7215 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7216 ioc->alt_ioc->taskmgmt_in_progress = 0;
7217 }
7218 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7219
7220 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7221 if (MptResetHandlers[cb_idx]) {
7222 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7223 if (ioc->alt_ioc)
7224 mpt_signal_reset(cb_idx,
7225 ioc->alt_ioc, MPT_IOC_POST_RESET);
7226 }
7227 }
7228exit:
7229 dtmprintk(ioc,
7230 printk(MYIOC_s_DEBUG_FMT
7231 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7232 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7233 "SUCCESS" : "FAILED")));
7234
7235 return rc;
7236}
7237
7238#ifdef CONFIG_FUSION_LOGGING
7239static void
7240mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7241{
7242 char *ds = NULL;
7243 u32 evData0;
7244 int ii;
7245 u8 event;
7246 char *evStr = ioc->evStr;
7247
7248 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7249 evData0 = le32_to_cpu(pEventReply->Data[0]);
7250
7251 switch(event) {
7252 case MPI_EVENT_NONE:
7253 ds = "None";
7254 break;
7255 case MPI_EVENT_LOG_DATA:
7256 ds = "Log Data";
7257 break;
7258 case MPI_EVENT_STATE_CHANGE:
7259 ds = "State Change";
7260 break;
7261 case MPI_EVENT_UNIT_ATTENTION:
7262 ds = "Unit Attention";
7263 break;
7264 case MPI_EVENT_IOC_BUS_RESET:
7265 ds = "IOC Bus Reset";
7266 break;
7267 case MPI_EVENT_EXT_BUS_RESET:
7268 ds = "External Bus Reset";
7269 break;
7270 case MPI_EVENT_RESCAN:
7271 ds = "Bus Rescan Event";
7272 break;
7273 case MPI_EVENT_LINK_STATUS_CHANGE:
7274 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7275 ds = "Link Status(FAILURE) Change";
7276 else
7277 ds = "Link Status(ACTIVE) Change";
7278 break;
7279 case MPI_EVENT_LOOP_STATE_CHANGE:
7280 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7281 ds = "Loop State(LIP) Change";
7282 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7283 ds = "Loop State(LPE) Change";
7284 else
7285 ds = "Loop State(LPB) Change";
7286 break;
7287 case MPI_EVENT_LOGOUT:
7288 ds = "Logout";
7289 break;
7290 case MPI_EVENT_EVENT_CHANGE:
7291 if (evData0)
7292 ds = "Events ON";
7293 else
7294 ds = "Events OFF";
7295 break;
7296 case MPI_EVENT_INTEGRATED_RAID:
7297 {
7298 u8 ReasonCode = (u8)(evData0 >> 16);
7299 switch (ReasonCode) {
7300 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7301 ds = "Integrated Raid: Volume Created";
7302 break;
7303 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7304 ds = "Integrated Raid: Volume Deleted";
7305 break;
7306 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7307 ds = "Integrated Raid: Volume Settings Changed";
7308 break;
7309 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7310 ds = "Integrated Raid: Volume Status Changed";
7311 break;
7312 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7313 ds = "Integrated Raid: Volume Physdisk Changed";
7314 break;
7315 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7316 ds = "Integrated Raid: Physdisk Created";
7317 break;
7318 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7319 ds = "Integrated Raid: Physdisk Deleted";
7320 break;
7321 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7322 ds = "Integrated Raid: Physdisk Settings Changed";
7323 break;
7324 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7325 ds = "Integrated Raid: Physdisk Status Changed";
7326 break;
7327 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7328 ds = "Integrated Raid: Domain Validation Needed";
7329 break;
7330 case MPI_EVENT_RAID_RC_SMART_DATA :
7331 ds = "Integrated Raid; Smart Data";
7332 break;
7333 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7334 ds = "Integrated Raid: Replace Action Started";
7335 break;
7336 default:
7337 ds = "Integrated Raid";
7338 break;
7339 }
7340 break;
7341 }
7342 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7343 ds = "SCSI Device Status Change";
7344 break;
7345 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7346 {
7347 u8 id = (u8)(evData0);
7348 u8 channel = (u8)(evData0 >> 8);
7349 u8 ReasonCode = (u8)(evData0 >> 16);
7350 switch (ReasonCode) {
7351 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7352 snprintf(evStr, EVENT_DESCR_STR_SZ,
7353 "SAS Device Status Change: Added: "
7354 "id=%d channel=%d", id, channel);
7355 break;
7356 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7357 snprintf(evStr, EVENT_DESCR_STR_SZ,
7358 "SAS Device Status Change: Deleted: "
7359 "id=%d channel=%d", id, channel);
7360 break;
7361 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7362 snprintf(evStr, EVENT_DESCR_STR_SZ,
7363 "SAS Device Status Change: SMART Data: "
7364 "id=%d channel=%d", id, channel);
7365 break;
7366 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7367 snprintf(evStr, EVENT_DESCR_STR_SZ,
7368 "SAS Device Status Change: No Persistency: "
7369 "id=%d channel=%d", id, channel);
7370 break;
7371 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7372 snprintf(evStr, EVENT_DESCR_STR_SZ,
7373 "SAS Device Status Change: Unsupported Device "
7374 "Discovered : id=%d channel=%d", id, channel);
7375 break;
7376 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7377 snprintf(evStr, EVENT_DESCR_STR_SZ,
7378 "SAS Device Status Change: Internal Device "
7379 "Reset : id=%d channel=%d", id, channel);
7380 break;
7381 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7382 snprintf(evStr, EVENT_DESCR_STR_SZ,
7383 "SAS Device Status Change: Internal Task "
7384 "Abort : id=%d channel=%d", id, channel);
7385 break;
7386 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7387 snprintf(evStr, EVENT_DESCR_STR_SZ,
7388 "SAS Device Status Change: Internal Abort "
7389 "Task Set : id=%d channel=%d", id, channel);
7390 break;
7391 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7392 snprintf(evStr, EVENT_DESCR_STR_SZ,
7393 "SAS Device Status Change: Internal Clear "
7394 "Task Set : id=%d channel=%d", id, channel);
7395 break;
7396 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7397 snprintf(evStr, EVENT_DESCR_STR_SZ,
7398 "SAS Device Status Change: Internal Query "
7399 "Task : id=%d channel=%d", id, channel);
7400 break;
7401 default:
7402 snprintf(evStr, EVENT_DESCR_STR_SZ,
7403 "SAS Device Status Change: Unknown: "
7404 "id=%d channel=%d", id, channel);
7405 break;
7406 }
7407 break;
7408 }
7409 case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7410 ds = "Bus Timer Expired";
7411 break;
7412 case MPI_EVENT_QUEUE_FULL:
7413 {
7414 u16 curr_depth = (u16)(evData0 >> 16);
7415 u8 channel = (u8)(evData0 >> 8);
7416 u8 id = (u8)(evData0);
7417
7418 snprintf(evStr, EVENT_DESCR_STR_SZ,
7419 "Queue Full: channel=%d id=%d depth=%d",
7420 channel, id, curr_depth);
7421 break;
7422 }
7423 case MPI_EVENT_SAS_SES:
7424 ds = "SAS SES Event";
7425 break;
7426 case MPI_EVENT_PERSISTENT_TABLE_FULL:
7427 ds = "Persistent Table Full";
7428 break;
7429 case MPI_EVENT_SAS_PHY_LINK_STATUS:
7430 {
7431 u8 LinkRates = (u8)(evData0 >> 8);
7432 u8 PhyNumber = (u8)(evData0);
7433 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7434 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7435 switch (LinkRates) {
7436 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7437 snprintf(evStr, EVENT_DESCR_STR_SZ,
7438 "SAS PHY Link Status: Phy=%d:"
7439 " Rate Unknown",PhyNumber);
7440 break;
7441 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7442 snprintf(evStr, EVENT_DESCR_STR_SZ,
7443 "SAS PHY Link Status: Phy=%d:"
7444 " Phy Disabled",PhyNumber);
7445 break;
7446 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7447 snprintf(evStr, EVENT_DESCR_STR_SZ,
7448 "SAS PHY Link Status: Phy=%d:"
7449 " Failed Speed Nego",PhyNumber);
7450 break;
7451 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7452 snprintf(evStr, EVENT_DESCR_STR_SZ,
7453 "SAS PHY Link Status: Phy=%d:"
7454 " Sata OOB Completed",PhyNumber);
7455 break;
7456 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7457 snprintf(evStr, EVENT_DESCR_STR_SZ,
7458 "SAS PHY Link Status: Phy=%d:"
7459 " Rate 1.5 Gbps",PhyNumber);
7460 break;
7461 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7462 snprintf(evStr, EVENT_DESCR_STR_SZ,
7463 "SAS PHY Link Status: Phy=%d:"
7464 " Rate 3.0 Gbps", PhyNumber);
7465 break;
7466 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7467 snprintf(evStr, EVENT_DESCR_STR_SZ,
7468 "SAS PHY Link Status: Phy=%d:"
7469 " Rate 6.0 Gbps", PhyNumber);
7470 break;
7471 default:
7472 snprintf(evStr, EVENT_DESCR_STR_SZ,
7473 "SAS PHY Link Status: Phy=%d", PhyNumber);
7474 break;
7475 }
7476 break;
7477 }
7478 case MPI_EVENT_SAS_DISCOVERY_ERROR:
7479 ds = "SAS Discovery Error";
7480 break;
7481 case MPI_EVENT_IR_RESYNC_UPDATE:
7482 {
7483 u8 resync_complete = (u8)(evData0 >> 16);
7484 snprintf(evStr, EVENT_DESCR_STR_SZ,
7485 "IR Resync Update: Complete = %d:",resync_complete);
7486 break;
7487 }
7488 case MPI_EVENT_IR2:
7489 {
7490 u8 id = (u8)(evData0);
7491 u8 channel = (u8)(evData0 >> 8);
7492 u8 phys_num = (u8)(evData0 >> 24);
7493 u8 ReasonCode = (u8)(evData0 >> 16);
7494
7495 switch (ReasonCode) {
7496 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7497 snprintf(evStr, EVENT_DESCR_STR_SZ,
7498 "IR2: LD State Changed: "
7499 "id=%d channel=%d phys_num=%d",
7500 id, channel, phys_num);
7501 break;
7502 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7503 snprintf(evStr, EVENT_DESCR_STR_SZ,
7504 "IR2: PD State Changed "
7505 "id=%d channel=%d phys_num=%d",
7506 id, channel, phys_num);
7507 break;
7508 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7509 snprintf(evStr, EVENT_DESCR_STR_SZ,
7510 "IR2: Bad Block Table Full: "
7511 "id=%d channel=%d phys_num=%d",
7512 id, channel, phys_num);
7513 break;
7514 case MPI_EVENT_IR2_RC_PD_INSERTED:
7515 snprintf(evStr, EVENT_DESCR_STR_SZ,
7516 "IR2: PD Inserted: "
7517 "id=%d channel=%d phys_num=%d",
7518 id, channel, phys_num);
7519 break;
7520 case MPI_EVENT_IR2_RC_PD_REMOVED:
7521 snprintf(evStr, EVENT_DESCR_STR_SZ,
7522 "IR2: PD Removed: "
7523 "id=%d channel=%d phys_num=%d",
7524 id, channel, phys_num);
7525 break;
7526 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7527 snprintf(evStr, EVENT_DESCR_STR_SZ,
7528 "IR2: Foreign CFG Detected: "
7529 "id=%d channel=%d phys_num=%d",
7530 id, channel, phys_num);
7531 break;
7532 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7533 snprintf(evStr, EVENT_DESCR_STR_SZ,
7534 "IR2: Rebuild Medium Error: "
7535 "id=%d channel=%d phys_num=%d",
7536 id, channel, phys_num);
7537 break;
7538 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7539 snprintf(evStr, EVENT_DESCR_STR_SZ,
7540 "IR2: Dual Port Added: "
7541 "id=%d channel=%d phys_num=%d",
7542 id, channel, phys_num);
7543 break;
7544 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7545 snprintf(evStr, EVENT_DESCR_STR_SZ,
7546 "IR2: Dual Port Removed: "
7547 "id=%d channel=%d phys_num=%d",
7548 id, channel, phys_num);
7549 break;
7550 default:
7551 ds = "IR2";
7552 break;
7553 }
7554 break;
7555 }
7556 case MPI_EVENT_SAS_DISCOVERY:
7557 {
7558 if (evData0)
7559 ds = "SAS Discovery: Start";
7560 else
7561 ds = "SAS Discovery: Stop";
7562 break;
7563 }
7564 case MPI_EVENT_LOG_ENTRY_ADDED:
7565 ds = "SAS Log Entry Added";
7566 break;
7567
7568 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7569 {
7570 u8 phy_num = (u8)(evData0);
7571 u8 port_num = (u8)(evData0 >> 8);
7572 u8 port_width = (u8)(evData0 >> 16);
7573 u8 primitive = (u8)(evData0 >> 24);
7574 snprintf(evStr, EVENT_DESCR_STR_SZ,
7575 "SAS Broadcast Primitive: phy=%d port=%d "
7576 "width=%d primitive=0x%02x",
7577 phy_num, port_num, port_width, primitive);
7578 break;
7579 }
7580
7581 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7582 {
7583 u8 reason = (u8)(evData0);
7584
7585 switch (reason) {
7586 case MPI_EVENT_SAS_INIT_RC_ADDED:
7587 ds = "SAS Initiator Status Change: Added";
7588 break;
7589 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7590 ds = "SAS Initiator Status Change: Deleted";
7591 break;
7592 default:
7593 ds = "SAS Initiator Status Change";
7594 break;
7595 }
7596 break;
7597 }
7598
7599 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7600 {
7601 u8 max_init = (u8)(evData0);
7602 u8 current_init = (u8)(evData0 >> 8);
7603
7604 snprintf(evStr, EVENT_DESCR_STR_SZ,
7605 "SAS Initiator Device Table Overflow: max initiators=%02d "
7606 "current initiators=%02d",
7607 max_init, current_init);
7608 break;
7609 }
7610 case MPI_EVENT_SAS_SMP_ERROR:
7611 {
7612 u8 status = (u8)(evData0);
7613 u8 port_num = (u8)(evData0 >> 8);
7614 u8 result = (u8)(evData0 >> 16);
7615
7616 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7617 snprintf(evStr, EVENT_DESCR_STR_SZ,
7618 "SAS SMP Error: port=%d result=0x%02x",
7619 port_num, result);
7620 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7621 snprintf(evStr, EVENT_DESCR_STR_SZ,
7622 "SAS SMP Error: port=%d : CRC Error",
7623 port_num);
7624 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7625 snprintf(evStr, EVENT_DESCR_STR_SZ,
7626 "SAS SMP Error: port=%d : Timeout",
7627 port_num);
7628 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7629 snprintf(evStr, EVENT_DESCR_STR_SZ,
7630 "SAS SMP Error: port=%d : No Destination",
7631 port_num);
7632 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7633 snprintf(evStr, EVENT_DESCR_STR_SZ,
7634 "SAS SMP Error: port=%d : Bad Destination",
7635 port_num);
7636 else
7637 snprintf(evStr, EVENT_DESCR_STR_SZ,
7638 "SAS SMP Error: port=%d : status=0x%02x",
7639 port_num, status);
7640 break;
7641 }
7642
7643 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7644 {
7645 u8 reason = (u8)(evData0);
7646
7647 switch (reason) {
7648 case MPI_EVENT_SAS_EXP_RC_ADDED:
7649 ds = "Expander Status Change: Added";
7650 break;
7651 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7652 ds = "Expander Status Change: Deleted";
7653 break;
7654 default:
7655 ds = "Expander Status Change";
7656 break;
7657 }
7658 break;
7659 }
7660
7661 /*
7662 * MPT base "custom" events may be added here...
7663 */
7664 default:
7665 ds = "Unknown";
7666 break;
7667 }
7668 if (ds)
7669 strlcpy(evStr, ds, EVENT_DESCR_STR_SZ);
7670
7671
7672 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7673 "MPT event:(%02Xh) : %s\n",
7674 ioc->name, event, evStr));
7675
7676 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7677 ": Event data:\n"));
7678 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7679 devtverboseprintk(ioc, printk(" %08x",
7680 le32_to_cpu(pEventReply->Data[ii])));
7681 devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7682}
7683#endif
7684/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7685/**
7686 * ProcessEventNotification - Route EventNotificationReply to all event handlers
7687 * @ioc: Pointer to MPT_ADAPTER structure
7688 * @pEventReply: Pointer to EventNotification reply frame
7689 * @evHandlers: Pointer to integer, number of event handlers
7690 *
7691 * Routes a received EventNotificationReply to all currently registered
7692 * event handlers.
7693 * Returns sum of event handlers return values.
7694 */
7695static int
7696ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7697{
7698 u16 evDataLen;
7699 u32 evData0 = 0;
7700 int ii;
7701 u8 cb_idx;
7702 int r = 0;
7703 int handlers = 0;
7704 u8 event;
7705
7706 /*
7707 * Do platform normalization of values
7708 */
7709 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7710 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7711 if (evDataLen) {
7712 evData0 = le32_to_cpu(pEventReply->Data[0]);
7713 }
7714
7715#ifdef CONFIG_FUSION_LOGGING
7716 if (evDataLen)
7717 mpt_display_event_info(ioc, pEventReply);
7718#endif
7719
7720 /*
7721 * Do general / base driver event processing
7722 */
7723 switch(event) {
7724 case MPI_EVENT_EVENT_CHANGE: /* 0A */
7725 if (evDataLen) {
7726 u8 evState = evData0 & 0xFF;
7727
7728 /* CHECKME! What if evState unexpectedly says OFF (0)? */
7729
7730 /* Update EventState field in cached IocFacts */
7731 if (ioc->facts.Function) {
7732 ioc->facts.EventState = evState;
7733 }
7734 }
7735 break;
7736 case MPI_EVENT_INTEGRATED_RAID:
7737 mptbase_raid_process_event_data(ioc,
7738 (MpiEventDataRaid_t *)pEventReply->Data);
7739 break;
7740 default:
7741 break;
7742 }
7743
7744 /*
7745 * Should this event be logged? Events are written sequentially.
7746 * When buffer is full, start again at the top.
7747 */
7748 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7749 int idx;
7750
7751 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7752
7753 ioc->events[idx].event = event;
7754 ioc->events[idx].eventContext = ioc->eventContext;
7755
7756 for (ii = 0; ii < 2; ii++) {
7757 if (ii < evDataLen)
7758 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7759 else
7760 ioc->events[idx].data[ii] = 0;
7761 }
7762
7763 ioc->eventContext++;
7764 }
7765
7766
7767 /*
7768 * Call each currently registered protocol event handler.
7769 */
7770 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7771 if (MptEvHandlers[cb_idx]) {
7772 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7773 "Routing Event to event handler #%d\n",
7774 ioc->name, cb_idx));
7775 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7776 handlers++;
7777 }
7778 }
7779 /* FIXME? Examine results here? */
7780
7781 /*
7782 * If needed, send (a single) EventAck.
7783 */
7784 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7785 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7786 "EventAck required\n",ioc->name));
7787 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7788 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7789 ioc->name, ii));
7790 }
7791 }
7792
7793 *evHandlers = handlers;
7794 return r;
7795}
7796
7797/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7798/**
7799 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7800 * @ioc: Pointer to MPT_ADAPTER structure
7801 * @log_info: U32 LogInfo reply word from the IOC
7802 *
7803 * Refer to lsi/mpi_log_fc.h.
7804 */
7805static void
7806mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7807{
7808 char *desc = "unknown";
7809
7810 switch (log_info & 0xFF000000) {
7811 case MPI_IOCLOGINFO_FC_INIT_BASE:
7812 desc = "FCP Initiator";
7813 break;
7814 case MPI_IOCLOGINFO_FC_TARGET_BASE:
7815 desc = "FCP Target";
7816 break;
7817 case MPI_IOCLOGINFO_FC_LAN_BASE:
7818 desc = "LAN";
7819 break;
7820 case MPI_IOCLOGINFO_FC_MSG_BASE:
7821 desc = "MPI Message Layer";
7822 break;
7823 case MPI_IOCLOGINFO_FC_LINK_BASE:
7824 desc = "FC Link";
7825 break;
7826 case MPI_IOCLOGINFO_FC_CTX_BASE:
7827 desc = "Context Manager";
7828 break;
7829 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7830 desc = "Invalid Field Offset";
7831 break;
7832 case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7833 desc = "State Change Info";
7834 break;
7835 }
7836
7837 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7838 ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7839}
7840
7841/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7842/**
7843 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7844 * @ioc: Pointer to MPT_ADAPTER structure
7845 * @log_info: U32 LogInfo word from the IOC
7846 *
7847 * Refer to lsi/sp_log.h.
7848 */
7849static void
7850mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7851{
7852 u32 info = log_info & 0x00FF0000;
7853 char *desc = "unknown";
7854
7855 switch (info) {
7856 case 0x00010000:
7857 desc = "bug! MID not found";
7858 break;
7859
7860 case 0x00020000:
7861 desc = "Parity Error";
7862 break;
7863
7864 case 0x00030000:
7865 desc = "ASYNC Outbound Overrun";
7866 break;
7867
7868 case 0x00040000:
7869 desc = "SYNC Offset Error";
7870 break;
7871
7872 case 0x00050000:
7873 desc = "BM Change";
7874 break;
7875
7876 case 0x00060000:
7877 desc = "Msg In Overflow";
7878 break;
7879
7880 case 0x00070000:
7881 desc = "DMA Error";
7882 break;
7883
7884 case 0x00080000:
7885 desc = "Outbound DMA Overrun";
7886 break;
7887
7888 case 0x00090000:
7889 desc = "Task Management";
7890 break;
7891
7892 case 0x000A0000:
7893 desc = "Device Problem";
7894 break;
7895
7896 case 0x000B0000:
7897 desc = "Invalid Phase Change";
7898 break;
7899
7900 case 0x000C0000:
7901 desc = "Untagged Table Size";
7902 break;
7903
7904 }
7905
7906 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7907}
7908
7909/* strings for sas loginfo */
7910 static char *originator_str[] = {
7911 "IOP", /* 00h */
7912 "PL", /* 01h */
7913 "IR" /* 02h */
7914 };
7915 static char *iop_code_str[] = {
7916 NULL, /* 00h */
7917 "Invalid SAS Address", /* 01h */
7918 NULL, /* 02h */
7919 "Invalid Page", /* 03h */
7920 "Diag Message Error", /* 04h */
7921 "Task Terminated", /* 05h */
7922 "Enclosure Management", /* 06h */
7923 "Target Mode" /* 07h */
7924 };
7925 static char *pl_code_str[] = {
7926 NULL, /* 00h */
7927 "Open Failure", /* 01h */
7928 "Invalid Scatter Gather List", /* 02h */
7929 "Wrong Relative Offset or Frame Length", /* 03h */
7930 "Frame Transfer Error", /* 04h */
7931 "Transmit Frame Connected Low", /* 05h */
7932 "SATA Non-NCQ RW Error Bit Set", /* 06h */
7933 "SATA Read Log Receive Data Error", /* 07h */
7934 "SATA NCQ Fail All Commands After Error", /* 08h */
7935 "SATA Error in Receive Set Device Bit FIS", /* 09h */
7936 "Receive Frame Invalid Message", /* 0Ah */
7937 "Receive Context Message Valid Error", /* 0Bh */
7938 "Receive Frame Current Frame Error", /* 0Ch */
7939 "SATA Link Down", /* 0Dh */
7940 "Discovery SATA Init W IOS", /* 0Eh */
7941 "Config Invalid Page", /* 0Fh */
7942 "Discovery SATA Init Timeout", /* 10h */
7943 "Reset", /* 11h */
7944 "Abort", /* 12h */
7945 "IO Not Yet Executed", /* 13h */
7946 "IO Executed", /* 14h */
7947 "Persistent Reservation Out Not Affiliation "
7948 "Owner", /* 15h */
7949 "Open Transmit DMA Abort", /* 16h */
7950 "IO Device Missing Delay Retry", /* 17h */
7951 "IO Cancelled Due to Receive Error", /* 18h */
7952 NULL, /* 19h */
7953 NULL, /* 1Ah */
7954 NULL, /* 1Bh */
7955 NULL, /* 1Ch */
7956 NULL, /* 1Dh */
7957 NULL, /* 1Eh */
7958 NULL, /* 1Fh */
7959 "Enclosure Management" /* 20h */
7960 };
7961 static char *ir_code_str[] = {
7962 "Raid Action Error", /* 00h */
7963 NULL, /* 00h */
7964 NULL, /* 01h */
7965 NULL, /* 02h */
7966 NULL, /* 03h */
7967 NULL, /* 04h */
7968 NULL, /* 05h */
7969 NULL, /* 06h */
7970 NULL /* 07h */
7971 };
7972 static char *raid_sub_code_str[] = {
7973 NULL, /* 00h */
7974 "Volume Creation Failed: Data Passed too "
7975 "Large", /* 01h */
7976 "Volume Creation Failed: Duplicate Volumes "
7977 "Attempted", /* 02h */
7978 "Volume Creation Failed: Max Number "
7979 "Supported Volumes Exceeded", /* 03h */
7980 "Volume Creation Failed: DMA Error", /* 04h */
7981 "Volume Creation Failed: Invalid Volume Type", /* 05h */
7982 "Volume Creation Failed: Error Reading "
7983 "MFG Page 4", /* 06h */
7984 "Volume Creation Failed: Creating Internal "
7985 "Structures", /* 07h */
7986 NULL, /* 08h */
7987 NULL, /* 09h */
7988 NULL, /* 0Ah */
7989 NULL, /* 0Bh */
7990 NULL, /* 0Ch */
7991 NULL, /* 0Dh */
7992 NULL, /* 0Eh */
7993 NULL, /* 0Fh */
7994 "Activation failed: Already Active Volume", /* 10h */
7995 "Activation failed: Unsupported Volume Type", /* 11h */
7996 "Activation failed: Too Many Active Volumes", /* 12h */
7997 "Activation failed: Volume ID in Use", /* 13h */
7998 "Activation failed: Reported Failure", /* 14h */
7999 "Activation failed: Importing a Volume", /* 15h */
8000 NULL, /* 16h */
8001 NULL, /* 17h */
8002 NULL, /* 18h */
8003 NULL, /* 19h */
8004 NULL, /* 1Ah */
8005 NULL, /* 1Bh */
8006 NULL, /* 1Ch */
8007 NULL, /* 1Dh */
8008 NULL, /* 1Eh */
8009 NULL, /* 1Fh */
8010 "Phys Disk failed: Too Many Phys Disks", /* 20h */
8011 "Phys Disk failed: Data Passed too Large", /* 21h */
8012 "Phys Disk failed: DMA Error", /* 22h */
8013 "Phys Disk failed: Invalid <channel:id>", /* 23h */
8014 "Phys Disk failed: Creating Phys Disk Config "
8015 "Page", /* 24h */
8016 NULL, /* 25h */
8017 NULL, /* 26h */
8018 NULL, /* 27h */
8019 NULL, /* 28h */
8020 NULL, /* 29h */
8021 NULL, /* 2Ah */
8022 NULL, /* 2Bh */
8023 NULL, /* 2Ch */
8024 NULL, /* 2Dh */
8025 NULL, /* 2Eh */
8026 NULL, /* 2Fh */
8027 "Compatibility Error: IR Disabled", /* 30h */
8028 "Compatibility Error: Inquiry Command Failed", /* 31h */
8029 "Compatibility Error: Device not Direct Access "
8030 "Device ", /* 32h */
8031 "Compatibility Error: Removable Device Found", /* 33h */
8032 "Compatibility Error: Device SCSI Version not "
8033 "2 or Higher", /* 34h */
8034 "Compatibility Error: SATA Device, 48 BIT LBA "
8035 "not Supported", /* 35h */
8036 "Compatibility Error: Device doesn't have "
8037 "512 Byte Block Sizes", /* 36h */
8038 "Compatibility Error: Volume Type Check Failed", /* 37h */
8039 "Compatibility Error: Volume Type is "
8040 "Unsupported by FW", /* 38h */
8041 "Compatibility Error: Disk Drive too Small for "
8042 "use in Volume", /* 39h */
8043 "Compatibility Error: Phys Disk for Create "
8044 "Volume not Found", /* 3Ah */
8045 "Compatibility Error: Too Many or too Few "
8046 "Disks for Volume Type", /* 3Bh */
8047 "Compatibility Error: Disk stripe Sizes "
8048 "Must be 64KB", /* 3Ch */
8049 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8050 };
8051
8052/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8053/**
8054 * mpt_sas_log_info - Log information returned from SAS IOC.
8055 * @ioc: Pointer to MPT_ADAPTER structure
8056 * @log_info: U32 LogInfo reply word from the IOC
8057 * @cb_idx: callback function's handle
8058 *
8059 * Refer to lsi/mpi_log_sas.h.
8060 **/
8061static void
8062mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8063{
8064 union loginfo_type {
8065 u32 loginfo;
8066 struct {
8067 u32 subcode:16;
8068 u32 code:8;
8069 u32 originator:4;
8070 u32 bus_type:4;
8071 } dw;
8072 };
8073 union loginfo_type sas_loginfo;
8074 char *originator_desc = NULL;
8075 char *code_desc = NULL;
8076 char *sub_code_desc = NULL;
8077
8078 sas_loginfo.loginfo = log_info;
8079 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8080 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8081 return;
8082
8083 originator_desc = originator_str[sas_loginfo.dw.originator];
8084
8085 switch (sas_loginfo.dw.originator) {
8086
8087 case 0: /* IOP */
8088 if (sas_loginfo.dw.code <
8089 ARRAY_SIZE(iop_code_str))
8090 code_desc = iop_code_str[sas_loginfo.dw.code];
8091 break;
8092 case 1: /* PL */
8093 if (sas_loginfo.dw.code <
8094 ARRAY_SIZE(pl_code_str))
8095 code_desc = pl_code_str[sas_loginfo.dw.code];
8096 break;
8097 case 2: /* IR */
8098 if (sas_loginfo.dw.code >=
8099 ARRAY_SIZE(ir_code_str))
8100 break;
8101 code_desc = ir_code_str[sas_loginfo.dw.code];
8102 if (sas_loginfo.dw.subcode >=
8103 ARRAY_SIZE(raid_sub_code_str))
8104 break;
8105 if (sas_loginfo.dw.code == 0)
8106 sub_code_desc =
8107 raid_sub_code_str[sas_loginfo.dw.subcode];
8108 break;
8109 default:
8110 return;
8111 }
8112
8113 if (sub_code_desc != NULL)
8114 printk(MYIOC_s_INFO_FMT
8115 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8116 " SubCode={%s} cb_idx %s\n",
8117 ioc->name, log_info, originator_desc, code_desc,
8118 sub_code_desc, MptCallbacksName[cb_idx]);
8119 else if (code_desc != NULL)
8120 printk(MYIOC_s_INFO_FMT
8121 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8122 " SubCode(0x%04x) cb_idx %s\n",
8123 ioc->name, log_info, originator_desc, code_desc,
8124 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8125 else
8126 printk(MYIOC_s_INFO_FMT
8127 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8128 " SubCode(0x%04x) cb_idx %s\n",
8129 ioc->name, log_info, originator_desc,
8130 sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8131 MptCallbacksName[cb_idx]);
8132}
8133
8134/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8135/**
8136 * mpt_iocstatus_info_config - IOCSTATUS information for config pages
8137 * @ioc: Pointer to MPT_ADAPTER structure
8138 * @ioc_status: U32 IOCStatus word from IOC
8139 * @mf: Pointer to MPT request frame
8140 *
8141 * Refer to lsi/mpi.h.
8142 **/
8143static void
8144mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8145{
8146 Config_t *pReq = (Config_t *)mf;
8147 char extend_desc[EVENT_DESCR_STR_SZ];
8148 char *desc = NULL;
8149 u32 form;
8150 u8 page_type;
8151
8152 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8153 page_type = pReq->ExtPageType;
8154 else
8155 page_type = pReq->Header.PageType;
8156
8157 /*
8158 * ignore invalid page messages for GET_NEXT_HANDLE
8159 */
8160 form = le32_to_cpu(pReq->PageAddress);
8161 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8162 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8163 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8164 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8165 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8166 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8167 return;
8168 }
8169 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8170 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8171 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8172 return;
8173 }
8174
8175 snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8176 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8177 page_type, pReq->Header.PageNumber, pReq->Action, form);
8178
8179 switch (ioc_status) {
8180
8181 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8182 desc = "Config Page Invalid Action";
8183 break;
8184
8185 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8186 desc = "Config Page Invalid Type";
8187 break;
8188
8189 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8190 desc = "Config Page Invalid Page";
8191 break;
8192
8193 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8194 desc = "Config Page Invalid Data";
8195 break;
8196
8197 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8198 desc = "Config Page No Defaults";
8199 break;
8200
8201 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8202 desc = "Config Page Can't Commit";
8203 break;
8204 }
8205
8206 if (!desc)
8207 return;
8208
8209 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8210 ioc->name, ioc_status, desc, extend_desc));
8211}
8212
8213/**
8214 * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8215 * @ioc: Pointer to MPT_ADAPTER structure
8216 * @ioc_status: U32 IOCStatus word from IOC
8217 * @mf: Pointer to MPT request frame
8218 *
8219 * Refer to lsi/mpi.h.
8220 **/
8221static void
8222mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8223{
8224 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8225 char *desc = NULL;
8226
8227 switch (status) {
8228
8229/****************************************************************************/
8230/* Common IOCStatus values for all replies */
8231/****************************************************************************/
8232
8233 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8234 desc = "Invalid Function";
8235 break;
8236
8237 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8238 desc = "Busy";
8239 break;
8240
8241 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8242 desc = "Invalid SGL";
8243 break;
8244
8245 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8246 desc = "Internal Error";
8247 break;
8248
8249 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8250 desc = "Reserved";
8251 break;
8252
8253 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8254 desc = "Insufficient Resources";
8255 break;
8256
8257 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8258 desc = "Invalid Field";
8259 break;
8260
8261 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8262 desc = "Invalid State";
8263 break;
8264
8265/****************************************************************************/
8266/* Config IOCStatus values */
8267/****************************************************************************/
8268
8269 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8270 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8271 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8272 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8273 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8274 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8275 mpt_iocstatus_info_config(ioc, status, mf);
8276 break;
8277
8278/****************************************************************************/
8279/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8280/* */
8281/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8282/* */
8283/****************************************************************************/
8284
8285 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8286 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8287 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8288 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8289 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8290 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8291 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8292 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8293 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8294 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8295 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8296 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8297 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8298 break;
8299
8300/****************************************************************************/
8301/* SCSI Target values */
8302/****************************************************************************/
8303
8304 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8305 desc = "Target: Priority IO";
8306 break;
8307
8308 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8309 desc = "Target: Invalid Port";
8310 break;
8311
8312 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8313 desc = "Target Invalid IO Index:";
8314 break;
8315
8316 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8317 desc = "Target: Aborted";
8318 break;
8319
8320 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8321 desc = "Target: No Conn Retryable";
8322 break;
8323
8324 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8325 desc = "Target: No Connection";
8326 break;
8327
8328 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8329 desc = "Target: Transfer Count Mismatch";
8330 break;
8331
8332 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8333 desc = "Target: STS Data not Sent";
8334 break;
8335
8336 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8337 desc = "Target: Data Offset Error";
8338 break;
8339
8340 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8341 desc = "Target: Too Much Write Data";
8342 break;
8343
8344 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8345 desc = "Target: IU Too Short";
8346 break;
8347
8348 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8349 desc = "Target: ACK NAK Timeout";
8350 break;
8351
8352 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8353 desc = "Target: Nak Received";
8354 break;
8355
8356/****************************************************************************/
8357/* Fibre Channel Direct Access values */
8358/****************************************************************************/
8359
8360 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8361 desc = "FC: Aborted";
8362 break;
8363
8364 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8365 desc = "FC: RX ID Invalid";
8366 break;
8367
8368 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8369 desc = "FC: DID Invalid";
8370 break;
8371
8372 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8373 desc = "FC: Node Logged Out";
8374 break;
8375
8376 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8377 desc = "FC: Exchange Canceled";
8378 break;
8379
8380/****************************************************************************/
8381/* LAN values */
8382/****************************************************************************/
8383
8384 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8385 desc = "LAN: Device not Found";
8386 break;
8387
8388 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8389 desc = "LAN: Device Failure";
8390 break;
8391
8392 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8393 desc = "LAN: Transmit Error";
8394 break;
8395
8396 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8397 desc = "LAN: Transmit Aborted";
8398 break;
8399
8400 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8401 desc = "LAN: Receive Error";
8402 break;
8403
8404 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8405 desc = "LAN: Receive Aborted";
8406 break;
8407
8408 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8409 desc = "LAN: Partial Packet";
8410 break;
8411
8412 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8413 desc = "LAN: Canceled";
8414 break;
8415
8416/****************************************************************************/
8417/* Serial Attached SCSI values */
8418/****************************************************************************/
8419
8420 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8421 desc = "SAS: SMP Request Failed";
8422 break;
8423
8424 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8425 desc = "SAS: SMP Data Overrun";
8426 break;
8427
8428 default:
8429 desc = "Others";
8430 break;
8431 }
8432
8433 if (!desc)
8434 return;
8435
8436 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8437 ioc->name, status, desc));
8438}
8439
8440/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8441EXPORT_SYMBOL(mpt_attach);
8442EXPORT_SYMBOL(mpt_detach);
8443#ifdef CONFIG_PM
8444EXPORT_SYMBOL(mpt_resume);
8445EXPORT_SYMBOL(mpt_suspend);
8446#endif
8447EXPORT_SYMBOL(ioc_list);
8448EXPORT_SYMBOL(mpt_register);
8449EXPORT_SYMBOL(mpt_deregister);
8450EXPORT_SYMBOL(mpt_event_register);
8451EXPORT_SYMBOL(mpt_event_deregister);
8452EXPORT_SYMBOL(mpt_reset_register);
8453EXPORT_SYMBOL(mpt_reset_deregister);
8454EXPORT_SYMBOL(mpt_device_driver_register);
8455EXPORT_SYMBOL(mpt_device_driver_deregister);
8456EXPORT_SYMBOL(mpt_get_msg_frame);
8457EXPORT_SYMBOL(mpt_put_msg_frame);
8458EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8459EXPORT_SYMBOL(mpt_free_msg_frame);
8460EXPORT_SYMBOL(mpt_send_handshake_request);
8461EXPORT_SYMBOL(mpt_verify_adapter);
8462EXPORT_SYMBOL(mpt_GetIocState);
8463EXPORT_SYMBOL(mpt_print_ioc_summary);
8464EXPORT_SYMBOL(mpt_HardResetHandler);
8465EXPORT_SYMBOL(mpt_config);
8466EXPORT_SYMBOL(mpt_findImVolumes);
8467EXPORT_SYMBOL(mpt_alloc_fw_memory);
8468EXPORT_SYMBOL(mpt_free_fw_memory);
8469EXPORT_SYMBOL(mptbase_sas_persist_operation);
8470EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8471
8472/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8473/**
8474 * fusion_init - Fusion MPT base driver initialization routine.
8475 *
8476 * Returns 0 for success, non-zero for failure.
8477 */
8478static int __init
8479fusion_init(void)
8480{
8481 u8 cb_idx;
8482
8483 show_mptmod_ver(my_NAME, my_VERSION);
8484 printk(KERN_INFO COPYRIGHT "\n");
8485
8486 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8487 MptCallbacks[cb_idx] = NULL;
8488 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8489 MptEvHandlers[cb_idx] = NULL;
8490 MptResetHandlers[cb_idx] = NULL;
8491 }
8492
8493 /* Register ourselves (mptbase) in order to facilitate
8494 * EventNotification handling.
8495 */
8496 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8497 "mptbase_reply");
8498
8499 /* Register for hard reset handling callbacks.
8500 */
8501 mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8502
8503#ifdef CONFIG_PROC_FS
8504 (void) procmpt_create();
8505#endif
8506 return 0;
8507}
8508
8509/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8510/**
8511 * fusion_exit - Perform driver unload cleanup.
8512 *
8513 * This routine frees all resources associated with each MPT adapter
8514 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
8515 */
8516static void __exit
8517fusion_exit(void)
8518{
8519
8520 mpt_reset_deregister(mpt_base_index);
8521
8522#ifdef CONFIG_PROC_FS
8523 procmpt_destroy();
8524#endif
8525}
8526
8527module_init(fusion_init);
8528module_exit(fusion_exit);
1/*
2 * linux/drivers/message/fusion/mptbase.c
3 * This is the Fusion MPT base driver which supports multiple
4 * (SCSI + LAN) specialized protocol drivers.
5 * For use with LSI PCI chip/adapter(s)
6 * running LSI Fusion MPT (Message Passing Technology) firmware.
7 *
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
10 *
11 */
12/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13/*
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 NO WARRANTY
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
33
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
46*/
47/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
48
49#include <linux/kernel.h>
50#include <linux/module.h>
51#include <linux/errno.h>
52#include <linux/init.h>
53#include <linux/seq_file.h>
54#include <linux/slab.h>
55#include <linux/types.h>
56#include <linux/pci.h>
57#include <linux/kdev_t.h>
58#include <linux/blkdev.h>
59#include <linux/delay.h>
60#include <linux/interrupt.h>
61#include <linux/dma-mapping.h>
62#include <linux/kthread.h>
63#include <scsi/scsi_host.h>
64
65#include "mptbase.h"
66#include "lsi/mpi_log_fc.h"
67
68/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
69#define my_NAME "Fusion MPT base driver"
70#define my_VERSION MPT_LINUX_VERSION_COMMON
71#define MYNAM "mptbase"
72
73MODULE_AUTHOR(MODULEAUTHOR);
74MODULE_DESCRIPTION(my_NAME);
75MODULE_LICENSE("GPL");
76MODULE_VERSION(my_VERSION);
77
78/*
79 * cmd line parameters
80 */
81
82static int mpt_msi_enable_spi;
83module_param(mpt_msi_enable_spi, int, 0);
84MODULE_PARM_DESC(mpt_msi_enable_spi,
85 " Enable MSI Support for SPI controllers (default=0)");
86
87static int mpt_msi_enable_fc;
88module_param(mpt_msi_enable_fc, int, 0);
89MODULE_PARM_DESC(mpt_msi_enable_fc,
90 " Enable MSI Support for FC controllers (default=0)");
91
92static int mpt_msi_enable_sas;
93module_param(mpt_msi_enable_sas, int, 0);
94MODULE_PARM_DESC(mpt_msi_enable_sas,
95 " Enable MSI Support for SAS controllers (default=0)");
96
97static int mpt_channel_mapping;
98module_param(mpt_channel_mapping, int, 0);
99MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
100
101static int mpt_debug_level;
102static int mpt_set_debug_level(const char *val, const struct kernel_param *kp);
103module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
104 &mpt_debug_level, 0600);
105MODULE_PARM_DESC(mpt_debug_level,
106 " debug level - refer to mptdebug.h - (default=0)");
107
108int mpt_fwfault_debug;
109EXPORT_SYMBOL(mpt_fwfault_debug);
110module_param(mpt_fwfault_debug, int, 0600);
111MODULE_PARM_DESC(mpt_fwfault_debug,
112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
113
114static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
115 [MPT_MAX_CALLBACKNAME_LEN+1];
116
117#ifdef MFCNT
118static int mfcounter = 0;
119#define PRINT_MF_COUNT 20000
120#endif
121
122/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
123/*
124 * Public data...
125 */
126
127#define WHOINIT_UNKNOWN 0xAA
128
129/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
130/*
131 * Private data...
132 */
133 /* Adapter link list */
134LIST_HEAD(ioc_list);
135 /* Callback lookup table */
136static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
137 /* Protocol driver class lookup table */
138static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
139 /* Event handler lookup table */
140static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
141 /* Reset handler lookup table */
142static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
143static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
144
145#ifdef CONFIG_PROC_FS
146static struct proc_dir_entry *mpt_proc_root_dir;
147#endif
148
149/*
150 * Driver Callback Index's
151 */
152static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
153static u8 last_drv_idx;
154
155/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
156/*
157 * Forward protos...
158 */
159static irqreturn_t mpt_interrupt(int irq, void *bus_id);
160static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
161 MPT_FRAME_HDR *reply);
162static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
163 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
164 int sleepFlag);
165static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
166static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
167static void mpt_adapter_disable(MPT_ADAPTER *ioc);
168static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
169
170static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
171static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
172static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
173static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
174static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
175static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
176static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
177static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
178static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
179static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
180static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
181static int PrimeIocFifos(MPT_ADAPTER *ioc);
182static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
183static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
184static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
185static int GetLanConfigPages(MPT_ADAPTER *ioc);
186static int GetIoUnitPage2(MPT_ADAPTER *ioc);
187int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
188static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
189static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
190static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
191static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
192static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
193static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
194 int sleepFlag);
195static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
196static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
197static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
198
199#ifdef CONFIG_PROC_FS
200static int mpt_summary_proc_show(struct seq_file *m, void *v);
201static int mpt_version_proc_show(struct seq_file *m, void *v);
202static int mpt_iocinfo_proc_show(struct seq_file *m, void *v);
203#endif
204static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
205
206static int ProcessEventNotification(MPT_ADAPTER *ioc,
207 EventNotificationReply_t *evReply, int *evHandlers);
208static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
209static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
210static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
211static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
212static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
213static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
214
215/* module entry point */
216static int __init fusion_init (void);
217static void __exit fusion_exit (void);
218
219#define CHIPREG_READ32(addr) readl_relaxed(addr)
220#define CHIPREG_READ32_dmasync(addr) readl(addr)
221#define CHIPREG_WRITE32(addr,val) writel(val, addr)
222#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
223#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
224
225static void
226pci_disable_io_access(struct pci_dev *pdev)
227{
228 u16 command_reg;
229
230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
231 command_reg &= ~1;
232 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
233}
234
235static void
236pci_enable_io_access(struct pci_dev *pdev)
237{
238 u16 command_reg;
239
240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
241 command_reg |= 1;
242 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
243}
244
245static int mpt_set_debug_level(const char *val, const struct kernel_param *kp)
246{
247 int ret = param_set_int(val, kp);
248 MPT_ADAPTER *ioc;
249
250 if (ret)
251 return ret;
252
253 list_for_each_entry(ioc, &ioc_list, list)
254 ioc->debug_level = mpt_debug_level;
255 return 0;
256}
257
258/**
259 * mpt_get_cb_idx - obtain cb_idx for registered driver
260 * @dclass: class driver enum
261 *
262 * Returns cb_idx, or zero means it wasn't found
263 **/
264static u8
265mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
266{
267 u8 cb_idx;
268
269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
270 if (MptDriverClass[cb_idx] == dclass)
271 return cb_idx;
272 return 0;
273}
274
275/**
276 * mpt_is_discovery_complete - determine if discovery has completed
277 * @ioc: per adatper instance
278 *
279 * Returns 1 when discovery completed, else zero.
280 */
281static int
282mpt_is_discovery_complete(MPT_ADAPTER *ioc)
283{
284 ConfigExtendedPageHeader_t hdr;
285 CONFIGPARMS cfg;
286 SasIOUnitPage0_t *buffer;
287 dma_addr_t dma_handle;
288 int rc = 0;
289
290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
291 memset(&cfg, 0, sizeof(CONFIGPARMS));
292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
295 cfg.cfghdr.ehdr = &hdr;
296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
297
298 if ((mpt_config(ioc, &cfg)))
299 goto out;
300 if (!hdr.ExtPageLength)
301 goto out;
302
303 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
304 &dma_handle);
305 if (!buffer)
306 goto out;
307
308 cfg.physAddr = dma_handle;
309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
310
311 if ((mpt_config(ioc, &cfg)))
312 goto out_free_consistent;
313
314 if (!(buffer->PhyData[0].PortFlags &
315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
316 rc = 1;
317
318 out_free_consistent:
319 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
320 buffer, dma_handle);
321 out:
322 return rc;
323}
324
325
326/**
327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
328 * @arg: input argument, used to derive ioc
329 *
330 * Return 0 if controller is removed from pci subsystem.
331 * Return -1 for other case.
332 */
333static int mpt_remove_dead_ioc_func(void *arg)
334{
335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
336 struct pci_dev *pdev;
337
338 if (!ioc)
339 return -1;
340
341 pdev = ioc->pcidev;
342 if (!pdev)
343 return -1;
344
345 pci_stop_and_remove_bus_device_locked(pdev);
346 return 0;
347}
348
349
350
351/**
352 * mpt_fault_reset_work - work performed on workq after ioc fault
353 * @work: input argument, used to derive ioc
354 *
355**/
356static void
357mpt_fault_reset_work(struct work_struct *work)
358{
359 MPT_ADAPTER *ioc =
360 container_of(work, MPT_ADAPTER, fault_reset_work.work);
361 u32 ioc_raw_state;
362 int rc;
363 unsigned long flags;
364 MPT_SCSI_HOST *hd;
365 struct task_struct *p;
366
367 if (ioc->ioc_reset_in_progress || !ioc->active)
368 goto out;
369
370
371 ioc_raw_state = mpt_GetIocState(ioc, 0);
372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
374 ioc->name, __func__);
375
376 /*
377 * Call mptscsih_flush_pending_cmds callback so that we
378 * flush all pending commands back to OS.
379 * This call is required to aovid deadlock at block layer.
380 * Dead IOC will fail to do diag reset,and this call is safe
381 * since dead ioc will never return any command back from HW.
382 */
383 hd = shost_priv(ioc->sh);
384 ioc->schedule_dead_ioc_flush_running_cmds(hd);
385
386 /*Remove the Dead Host */
387 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
388 "mpt_dead_ioc_%d", ioc->id);
389 if (IS_ERR(p)) {
390 printk(MYIOC_s_ERR_FMT
391 "%s: Running mpt_dead_ioc thread failed !\n",
392 ioc->name, __func__);
393 } else {
394 printk(MYIOC_s_WARN_FMT
395 "%s: Running mpt_dead_ioc thread success !\n",
396 ioc->name, __func__);
397 }
398 return; /* don't rearm timer */
399 }
400
401 if ((ioc_raw_state & MPI_IOC_STATE_MASK)
402 == MPI_IOC_STATE_FAULT) {
403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
406 ioc->name, __func__);
407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
409 __func__, (rc == 0) ? "success" : "failed");
410 ioc_raw_state = mpt_GetIocState(ioc, 0);
411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
413 "reset (%04xh)\n", ioc->name, ioc_raw_state &
414 MPI_DOORBELL_DATA_MASK);
415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
416 if ((mpt_is_discovery_complete(ioc))) {
417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
418 "discovery_quiesce_io flag\n", ioc->name));
419 ioc->sas_discovery_quiesce_io = 0;
420 }
421 }
422
423 out:
424 /*
425 * Take turns polling alternate controller
426 */
427 if (ioc->alt_ioc)
428 ioc = ioc->alt_ioc;
429
430 /* rearm the timer */
431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
432 if (ioc->reset_work_q)
433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
434 msecs_to_jiffies(MPT_POLLING_INTERVAL));
435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
436}
437
438
439/*
440 * Process turbo (context) reply...
441 */
442static void
443mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
444{
445 MPT_FRAME_HDR *mf = NULL;
446 MPT_FRAME_HDR *mr = NULL;
447 u16 req_idx = 0;
448 u8 cb_idx;
449
450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
451 ioc->name, pa));
452
453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
455 req_idx = pa & 0x0000FFFF;
456 cb_idx = (pa & 0x00FF0000) >> 16;
457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
458 break;
459 case MPI_CONTEXT_REPLY_TYPE_LAN:
460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
461 /*
462 * Blind set of mf to NULL here was fatal
463 * after lan_reply says "freeme"
464 * Fix sort of combined with an optimization here;
465 * added explicit check for case where lan_reply
466 * was just returning 1 and doing nothing else.
467 * For this case skip the callback, but set up
468 * proper mf value first here:-)
469 */
470 if ((pa & 0x58000000) == 0x58000000) {
471 req_idx = pa & 0x0000FFFF;
472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
473 mpt_free_msg_frame(ioc, mf);
474 mb();
475 return;
476 }
477 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
478 break;
479 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
480 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
481 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
482 break;
483 default:
484 cb_idx = 0;
485 BUG();
486 }
487
488 /* Check for (valid) IO callback! */
489 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
490 MptCallbacks[cb_idx] == NULL) {
491 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
492 __func__, ioc->name, cb_idx);
493 goto out;
494 }
495
496 if (MptCallbacks[cb_idx](ioc, mf, mr))
497 mpt_free_msg_frame(ioc, mf);
498 out:
499 mb();
500}
501
502static void
503mpt_reply(MPT_ADAPTER *ioc, u32 pa)
504{
505 MPT_FRAME_HDR *mf;
506 MPT_FRAME_HDR *mr;
507 u16 req_idx;
508 u8 cb_idx;
509 int freeme;
510
511 u32 reply_dma_low;
512 u16 ioc_stat;
513
514 /* non-TURBO reply! Hmmm, something may be up...
515 * Newest turbo reply mechanism; get address
516 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
517 */
518
519 /* Map DMA address of reply header to cpu address.
520 * pa is 32 bits - but the dma address may be 32 or 64 bits
521 * get offset based only only the low addresses
522 */
523
524 reply_dma_low = (pa <<= 1);
525 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
526 (reply_dma_low - ioc->reply_frames_low_dma));
527
528 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
529 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
530 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
531
532 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
533 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
534 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
535
536 /* Check/log IOC log info
537 */
538 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
539 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
540 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
541 if (ioc->bus_type == FC)
542 mpt_fc_log_info(ioc, log_info);
543 else if (ioc->bus_type == SPI)
544 mpt_spi_log_info(ioc, log_info);
545 else if (ioc->bus_type == SAS)
546 mpt_sas_log_info(ioc, log_info, cb_idx);
547 }
548
549 if (ioc_stat & MPI_IOCSTATUS_MASK)
550 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
551
552 /* Check for (valid) IO callback! */
553 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
554 MptCallbacks[cb_idx] == NULL) {
555 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
556 __func__, ioc->name, cb_idx);
557 freeme = 0;
558 goto out;
559 }
560
561 freeme = MptCallbacks[cb_idx](ioc, mf, mr);
562
563 out:
564 /* Flush (non-TURBO) reply with a WRITE! */
565 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
566
567 if (freeme)
568 mpt_free_msg_frame(ioc, mf);
569 mb();
570}
571
572/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
573/**
574 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
575 * @irq: irq number (not used)
576 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
577 *
578 * This routine is registered via the request_irq() kernel API call,
579 * and handles all interrupts generated from a specific MPT adapter
580 * (also referred to as a IO Controller or IOC).
581 * This routine must clear the interrupt from the adapter and does
582 * so by reading the reply FIFO. Multiple replies may be processed
583 * per single call to this routine.
584 *
585 * This routine handles register-level access of the adapter but
586 * dispatches (calls) a protocol-specific callback routine to handle
587 * the protocol-specific details of the MPT request completion.
588 */
589static irqreturn_t
590mpt_interrupt(int irq, void *bus_id)
591{
592 MPT_ADAPTER *ioc = bus_id;
593 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
594
595 if (pa == 0xFFFFFFFF)
596 return IRQ_NONE;
597
598 /*
599 * Drain the reply FIFO!
600 */
601 do {
602 if (pa & MPI_ADDRESS_REPLY_A_BIT)
603 mpt_reply(ioc, pa);
604 else
605 mpt_turbo_reply(ioc, pa);
606 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
607 } while (pa != 0xFFFFFFFF);
608
609 return IRQ_HANDLED;
610}
611
612/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
613/**
614 * mptbase_reply - MPT base driver's callback routine
615 * @ioc: Pointer to MPT_ADAPTER structure
616 * @req: Pointer to original MPT request frame
617 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
618 *
619 * MPT base driver's callback routine; all base driver
620 * "internal" request/reply processing is routed here.
621 * Currently used for EventNotification and EventAck handling.
622 *
623 * Returns 1 indicating original alloc'd request frame ptr
624 * should be freed, or 0 if it shouldn't.
625 */
626static int
627mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
628{
629 EventNotificationReply_t *pEventReply;
630 u8 event;
631 int evHandlers;
632 int freereq = 1;
633
634 switch (reply->u.hdr.Function) {
635 case MPI_FUNCTION_EVENT_NOTIFICATION:
636 pEventReply = (EventNotificationReply_t *)reply;
637 evHandlers = 0;
638 ProcessEventNotification(ioc, pEventReply, &evHandlers);
639 event = le32_to_cpu(pEventReply->Event) & 0xFF;
640 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
641 freereq = 0;
642 if (event != MPI_EVENT_EVENT_CHANGE)
643 break;
644 fallthrough;
645 case MPI_FUNCTION_CONFIG:
646 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
647 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
649 memcpy(ioc->mptbase_cmds.reply, reply,
650 min(MPT_DEFAULT_FRAME_SIZE,
651 4 * reply->u.reply.MsgLength));
652 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
653 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
654 complete(&ioc->mptbase_cmds.done);
655 } else
656 freereq = 0;
657 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
658 freereq = 1;
659 break;
660 case MPI_FUNCTION_EVENT_ACK:
661 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
662 "EventAck reply received\n", ioc->name));
663 break;
664 default:
665 printk(MYIOC_s_ERR_FMT
666 "Unexpected msg function (=%02Xh) reply received!\n",
667 ioc->name, reply->u.hdr.Function);
668 break;
669 }
670
671 /*
672 * Conditionally tell caller to free the original
673 * EventNotification/EventAck/unexpected request frame!
674 */
675 return freereq;
676}
677
678/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
679/**
680 * mpt_register - Register protocol-specific main callback handler.
681 * @cbfunc: callback function pointer
682 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
683 * @func_name: call function's name
684 *
685 * This routine is called by a protocol-specific driver (SCSI host,
686 * LAN, SCSI target) to register its reply callback routine. Each
687 * protocol-specific driver must do this before it will be able to
688 * use any IOC resources, such as obtaining request frames.
689 *
690 * NOTES: The SCSI protocol driver currently calls this routine thrice
691 * in order to register separate callbacks; one for "normal" SCSI IO;
692 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
693 *
694 * Returns u8 valued "handle" in the range (and S.O.D. order)
695 * {N,...,7,6,5,...,1} if successful.
696 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
697 * considered an error by the caller.
698 */
699u8
700mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
701{
702 u8 cb_idx;
703 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
704
705 /*
706 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
707 * (slot/handle 0 is reserved!)
708 */
709 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
710 if (MptCallbacks[cb_idx] == NULL) {
711 MptCallbacks[cb_idx] = cbfunc;
712 MptDriverClass[cb_idx] = dclass;
713 MptEvHandlers[cb_idx] = NULL;
714 last_drv_idx = cb_idx;
715 strlcpy(MptCallbacksName[cb_idx], func_name,
716 MPT_MAX_CALLBACKNAME_LEN+1);
717 break;
718 }
719 }
720
721 return last_drv_idx;
722}
723
724/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
725/**
726 * mpt_deregister - Deregister a protocol drivers resources.
727 * @cb_idx: previously registered callback handle
728 *
729 * Each protocol-specific driver should call this routine when its
730 * module is unloaded.
731 */
732void
733mpt_deregister(u8 cb_idx)
734{
735 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
736 MptCallbacks[cb_idx] = NULL;
737 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
738 MptEvHandlers[cb_idx] = NULL;
739
740 last_drv_idx++;
741 }
742}
743
744/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
745/**
746 * mpt_event_register - Register protocol-specific event callback handler.
747 * @cb_idx: previously registered (via mpt_register) callback handle
748 * @ev_cbfunc: callback function
749 *
750 * This routine can be called by one or more protocol-specific drivers
751 * if/when they choose to be notified of MPT events.
752 *
753 * Returns 0 for success.
754 */
755int
756mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
757{
758 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
759 return -1;
760
761 MptEvHandlers[cb_idx] = ev_cbfunc;
762 return 0;
763}
764
765/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
766/**
767 * mpt_event_deregister - Deregister protocol-specific event callback handler
768 * @cb_idx: previously registered callback handle
769 *
770 * Each protocol-specific driver should call this routine
771 * when it does not (or can no longer) handle events,
772 * or when its module is unloaded.
773 */
774void
775mpt_event_deregister(u8 cb_idx)
776{
777 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
778 return;
779
780 MptEvHandlers[cb_idx] = NULL;
781}
782
783/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
784/**
785 * mpt_reset_register - Register protocol-specific IOC reset handler.
786 * @cb_idx: previously registered (via mpt_register) callback handle
787 * @reset_func: reset function
788 *
789 * This routine can be called by one or more protocol-specific drivers
790 * if/when they choose to be notified of IOC resets.
791 *
792 * Returns 0 for success.
793 */
794int
795mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
796{
797 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
798 return -1;
799
800 MptResetHandlers[cb_idx] = reset_func;
801 return 0;
802}
803
804/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
805/**
806 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
807 * @cb_idx: previously registered callback handle
808 *
809 * Each protocol-specific driver should call this routine
810 * when it does not (or can no longer) handle IOC reset handling,
811 * or when its module is unloaded.
812 */
813void
814mpt_reset_deregister(u8 cb_idx)
815{
816 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
817 return;
818
819 MptResetHandlers[cb_idx] = NULL;
820}
821
822/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
823/**
824 * mpt_device_driver_register - Register device driver hooks
825 * @dd_cbfunc: driver callbacks struct
826 * @cb_idx: MPT protocol driver index
827 */
828int
829mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
830{
831 MPT_ADAPTER *ioc;
832 const struct pci_device_id *id;
833
834 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
835 return -EINVAL;
836
837 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
838
839 /* call per pci device probe entry point */
840 list_for_each_entry(ioc, &ioc_list, list) {
841 id = ioc->pcidev->driver ?
842 ioc->pcidev->driver->id_table : NULL;
843 if (dd_cbfunc->probe)
844 dd_cbfunc->probe(ioc->pcidev, id);
845 }
846
847 return 0;
848}
849
850/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
851/**
852 * mpt_device_driver_deregister - DeRegister device driver hooks
853 * @cb_idx: MPT protocol driver index
854 */
855void
856mpt_device_driver_deregister(u8 cb_idx)
857{
858 struct mpt_pci_driver *dd_cbfunc;
859 MPT_ADAPTER *ioc;
860
861 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
862 return;
863
864 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
865
866 list_for_each_entry(ioc, &ioc_list, list) {
867 if (dd_cbfunc->remove)
868 dd_cbfunc->remove(ioc->pcidev);
869 }
870
871 MptDeviceDriverHandlers[cb_idx] = NULL;
872}
873
874
875/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
876/**
877 * mpt_get_msg_frame - Obtain an MPT request frame from the pool
878 * @cb_idx: Handle of registered MPT protocol driver
879 * @ioc: Pointer to MPT adapter structure
880 *
881 * Obtain an MPT request frame from the pool (of 1024) that are
882 * allocated per MPT adapter.
883 *
884 * Returns pointer to a MPT request frame or %NULL if none are available
885 * or IOC is not active.
886 */
887MPT_FRAME_HDR*
888mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
889{
890 MPT_FRAME_HDR *mf;
891 unsigned long flags;
892 u16 req_idx; /* Request index */
893
894 /* validate handle and ioc identifier */
895
896#ifdef MFCNT
897 if (!ioc->active)
898 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
899 "returning NULL!\n", ioc->name);
900#endif
901
902 /* If interrupts are not attached, do not return a request frame */
903 if (!ioc->active)
904 return NULL;
905
906 spin_lock_irqsave(&ioc->FreeQlock, flags);
907 if (!list_empty(&ioc->FreeQ)) {
908 int req_offset;
909
910 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
911 u.frame.linkage.list);
912 list_del(&mf->u.frame.linkage.list);
913 mf->u.frame.linkage.arg1 = 0;
914 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
915 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
916 /* u16! */
917 req_idx = req_offset / ioc->req_sz;
918 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
919 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
920 /* Default, will be changed if necessary in SG generation */
921 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
922#ifdef MFCNT
923 ioc->mfcnt++;
924#endif
925 }
926 else
927 mf = NULL;
928 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
929
930#ifdef MFCNT
931 if (mf == NULL)
932 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
933 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
934 ioc->req_depth);
935 mfcounter++;
936 if (mfcounter == PRINT_MF_COUNT)
937 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
938 ioc->mfcnt, ioc->req_depth);
939#endif
940
941 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
942 ioc->name, cb_idx, ioc->id, mf));
943 return mf;
944}
945
946/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
947/**
948 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
949 * @cb_idx: Handle of registered MPT protocol driver
950 * @ioc: Pointer to MPT adapter structure
951 * @mf: Pointer to MPT request frame
952 *
953 * This routine posts an MPT request frame to the request post FIFO of a
954 * specific MPT adapter.
955 */
956void
957mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
958{
959 u32 mf_dma_addr;
960 int req_offset;
961 u16 req_idx; /* Request index */
962
963 /* ensure values are reset properly! */
964 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
965 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
966 /* u16! */
967 req_idx = req_offset / ioc->req_sz;
968 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
969 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
970
971 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
972
973 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
974 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
975 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
976 ioc->RequestNB[req_idx]));
977 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
978}
979
980/**
981 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
982 * @cb_idx: Handle of registered MPT protocol driver
983 * @ioc: Pointer to MPT adapter structure
984 * @mf: Pointer to MPT request frame
985 *
986 * Send a protocol-specific MPT request frame to an IOC using
987 * hi-priority request queue.
988 *
989 * This routine posts an MPT request frame to the request post FIFO of a
990 * specific MPT adapter.
991 **/
992void
993mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
994{
995 u32 mf_dma_addr;
996 int req_offset;
997 u16 req_idx; /* Request index */
998
999 /* ensure values are reset properly! */
1000 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1001 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
1002 req_idx = req_offset / ioc->req_sz;
1003 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1004 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1005
1006 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1007
1008 mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1009 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1010 ioc->name, mf_dma_addr, req_idx));
1011 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1012}
1013
1014/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1015/**
1016 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1017 * @ioc: Pointer to MPT adapter structure
1018 * @mf: Pointer to MPT request frame
1019 *
1020 * This routine places a MPT request frame back on the MPT adapter's
1021 * FreeQ.
1022 */
1023void
1024mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1025{
1026 unsigned long flags;
1027
1028 /* Put Request back on FreeQ! */
1029 spin_lock_irqsave(&ioc->FreeQlock, flags);
1030 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1031 goto out;
1032 /* signature to know if this mf is freed */
1033 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1034 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ);
1035#ifdef MFCNT
1036 ioc->mfcnt--;
1037#endif
1038 out:
1039 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1040}
1041
1042/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1043/**
1044 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1045 * @pAddr: virtual address for SGE
1046 * @flagslength: SGE flags and data transfer length
1047 * @dma_addr: Physical address
1048 *
1049 * This routine places a MPT request frame back on the MPT adapter's
1050 * FreeQ.
1051 */
1052static void
1053mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1054{
1055 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1056 pSge->FlagsLength = cpu_to_le32(flagslength);
1057 pSge->Address = cpu_to_le32(dma_addr);
1058}
1059
1060/**
1061 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1062 * @pAddr: virtual address for SGE
1063 * @flagslength: SGE flags and data transfer length
1064 * @dma_addr: Physical address
1065 *
1066 * This routine places a MPT request frame back on the MPT adapter's
1067 * FreeQ.
1068 **/
1069static void
1070mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1071{
1072 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1073 pSge->Address.Low = cpu_to_le32
1074 (lower_32_bits(dma_addr));
1075 pSge->Address.High = cpu_to_le32
1076 (upper_32_bits(dma_addr));
1077 pSge->FlagsLength = cpu_to_le32
1078 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1079}
1080
1081/**
1082 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1083 * @pAddr: virtual address for SGE
1084 * @flagslength: SGE flags and data transfer length
1085 * @dma_addr: Physical address
1086 *
1087 * This routine places a MPT request frame back on the MPT adapter's
1088 * FreeQ.
1089 **/
1090static void
1091mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1092{
1093 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1094 u32 tmp;
1095
1096 pSge->Address.Low = cpu_to_le32
1097 (lower_32_bits(dma_addr));
1098 tmp = (u32)(upper_32_bits(dma_addr));
1099
1100 /*
1101 * 1078 errata workaround for the 36GB limitation
1102 */
1103 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
1104 flagslength |=
1105 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1106 tmp |= (1<<31);
1107 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1108 printk(KERN_DEBUG "1078 P0M2 addressing for "
1109 "addr = 0x%llx len = %d\n",
1110 (unsigned long long)dma_addr,
1111 MPI_SGE_LENGTH(flagslength));
1112 }
1113
1114 pSge->Address.High = cpu_to_le32(tmp);
1115 pSge->FlagsLength = cpu_to_le32(
1116 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1117}
1118
1119/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1120/**
1121 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1122 * @pAddr: virtual address for SGE
1123 * @next: nextChainOffset value (u32's)
1124 * @length: length of next SGL segment
1125 * @dma_addr: Physical address
1126 *
1127 */
1128static void
1129mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1130{
1131 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1132
1133 pChain->Length = cpu_to_le16(length);
1134 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1135 pChain->NextChainOffset = next;
1136 pChain->Address = cpu_to_le32(dma_addr);
1137}
1138
1139/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1140/**
1141 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1142 * @pAddr: virtual address for SGE
1143 * @next: nextChainOffset value (u32's)
1144 * @length: length of next SGL segment
1145 * @dma_addr: Physical address
1146 *
1147 */
1148static void
1149mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1150{
1151 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1152 u32 tmp = dma_addr & 0xFFFFFFFF;
1153
1154 pChain->Length = cpu_to_le16(length);
1155 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1156 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1157
1158 pChain->NextChainOffset = next;
1159
1160 pChain->Address.Low = cpu_to_le32(tmp);
1161 tmp = (u32)(upper_32_bits(dma_addr));
1162 pChain->Address.High = cpu_to_le32(tmp);
1163}
1164
1165/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1166/**
1167 * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1168 * @cb_idx: Handle of registered MPT protocol driver
1169 * @ioc: Pointer to MPT adapter structure
1170 * @reqBytes: Size of the request in bytes
1171 * @req: Pointer to MPT request frame
1172 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1173 *
1174 * This routine is used exclusively to send MptScsiTaskMgmt
1175 * requests since they are required to be sent via doorbell handshake.
1176 *
1177 * NOTE: It is the callers responsibility to byte-swap fields in the
1178 * request which are greater than 1 byte in size.
1179 *
1180 * Returns 0 for success, non-zero for failure.
1181 */
1182int
1183mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1184{
1185 int r = 0;
1186 u8 *req_as_bytes;
1187 int ii;
1188
1189 /* State is known to be good upon entering
1190 * this function so issue the bus reset
1191 * request.
1192 */
1193
1194 /*
1195 * Emulate what mpt_put_msg_frame() does /wrt to sanity
1196 * setting cb_idx/req_idx. But ONLY if this request
1197 * is in proper (pre-alloc'd) request buffer range...
1198 */
1199 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1200 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1201 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1202 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1203 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1204 }
1205
1206 /* Make sure there are no doorbells */
1207 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1208
1209 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1210 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1211 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1212
1213 /* Wait for IOC doorbell int */
1214 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1215 return ii;
1216 }
1217
1218 /* Read doorbell and check for active bit */
1219 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1220 return -5;
1221
1222 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1223 ioc->name, ii));
1224
1225 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1226
1227 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1228 return -2;
1229 }
1230
1231 /* Send request via doorbell handshake */
1232 req_as_bytes = (u8 *) req;
1233 for (ii = 0; ii < reqBytes/4; ii++) {
1234 u32 word;
1235
1236 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1237 (req_as_bytes[(ii*4) + 1] << 8) |
1238 (req_as_bytes[(ii*4) + 2] << 16) |
1239 (req_as_bytes[(ii*4) + 3] << 24));
1240 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1241 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1242 r = -3;
1243 break;
1244 }
1245 }
1246
1247 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1248 r = 0;
1249 else
1250 r = -4;
1251
1252 /* Make sure there are no doorbells */
1253 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1254
1255 return r;
1256}
1257
1258/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1259/**
1260 * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1261 * @ioc: Pointer to MPT adapter structure
1262 * @access_control_value: define bits below
1263 * @sleepFlag: Specifies whether the process can sleep
1264 *
1265 * Provides mechanism for the host driver to control the IOC's
1266 * Host Page Buffer access.
1267 *
1268 * Access Control Value - bits[15:12]
1269 * 0h Reserved
1270 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1271 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1272 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1273 *
1274 * Returns 0 for success, non-zero for failure.
1275 */
1276
1277static int
1278mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1279{
1280 int r = 0;
1281
1282 /* return if in use */
1283 if (CHIPREG_READ32(&ioc->chip->Doorbell)
1284 & MPI_DOORBELL_ACTIVE)
1285 return -1;
1286
1287 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1288
1289 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1290 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1291 <<MPI_DOORBELL_FUNCTION_SHIFT) |
1292 (access_control_value<<12)));
1293
1294 /* Wait for IOC to clear Doorbell Status bit */
1295 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1296 return -2;
1297 }else
1298 return 0;
1299}
1300
1301/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1302/**
1303 * mpt_host_page_alloc - allocate system memory for the fw
1304 * @ioc: Pointer to pointer to IOC adapter
1305 * @ioc_init: Pointer to ioc init config page
1306 *
1307 * If we already allocated memory in past, then resend the same pointer.
1308 * Returns 0 for success, non-zero for failure.
1309 */
1310static int
1311mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1312{
1313 char *psge;
1314 int flags_length;
1315 u32 host_page_buffer_sz=0;
1316
1317 if(!ioc->HostPageBuffer) {
1318
1319 host_page_buffer_sz =
1320 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1321
1322 if(!host_page_buffer_sz)
1323 return 0; /* fw doesn't need any host buffers */
1324
1325 /* spin till we get enough memory */
1326 while (host_page_buffer_sz > 0) {
1327 ioc->HostPageBuffer =
1328 dma_alloc_coherent(&ioc->pcidev->dev,
1329 host_page_buffer_sz,
1330 &ioc->HostPageBuffer_dma,
1331 GFP_KERNEL);
1332 if (ioc->HostPageBuffer) {
1333 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1334 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1335 ioc->name, ioc->HostPageBuffer,
1336 (u32)ioc->HostPageBuffer_dma,
1337 host_page_buffer_sz));
1338 ioc->alloc_total += host_page_buffer_sz;
1339 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1340 break;
1341 }
1342
1343 host_page_buffer_sz -= (4*1024);
1344 }
1345 }
1346
1347 if(!ioc->HostPageBuffer) {
1348 printk(MYIOC_s_ERR_FMT
1349 "Failed to alloc memory for host_page_buffer!\n",
1350 ioc->name);
1351 return -999;
1352 }
1353
1354 psge = (char *)&ioc_init->HostPageBufferSGE;
1355 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1356 MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1357 MPI_SGE_FLAGS_HOST_TO_IOC |
1358 MPI_SGE_FLAGS_END_OF_BUFFER;
1359 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1360 flags_length |= ioc->HostPageBuffer_sz;
1361 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1362 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1363
1364 return 0;
1365}
1366
1367/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1368/**
1369 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1370 * @iocid: IOC unique identifier (integer)
1371 * @iocpp: Pointer to pointer to IOC adapter
1372 *
1373 * Given a unique IOC identifier, set pointer to the associated MPT
1374 * adapter structure.
1375 *
1376 * Returns iocid and sets iocpp if iocid is found.
1377 * Returns -1 if iocid is not found.
1378 */
1379int
1380mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1381{
1382 MPT_ADAPTER *ioc;
1383
1384 list_for_each_entry(ioc,&ioc_list,list) {
1385 if (ioc->id == iocid) {
1386 *iocpp =ioc;
1387 return iocid;
1388 }
1389 }
1390
1391 *iocpp = NULL;
1392 return -1;
1393}
1394
1395/**
1396 * mpt_get_product_name - returns product string
1397 * @vendor: pci vendor id
1398 * @device: pci device id
1399 * @revision: pci revision id
1400 *
1401 * Returns product string displayed when driver loads,
1402 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1403 *
1404 **/
1405static const char*
1406mpt_get_product_name(u16 vendor, u16 device, u8 revision)
1407{
1408 char *product_str = NULL;
1409
1410 if (vendor == PCI_VENDOR_ID_BROCADE) {
1411 switch (device)
1412 {
1413 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1414 switch (revision)
1415 {
1416 case 0x00:
1417 product_str = "BRE040 A0";
1418 break;
1419 case 0x01:
1420 product_str = "BRE040 A1";
1421 break;
1422 default:
1423 product_str = "BRE040";
1424 break;
1425 }
1426 break;
1427 }
1428 goto out;
1429 }
1430
1431 switch (device)
1432 {
1433 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1434 product_str = "LSIFC909 B1";
1435 break;
1436 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1437 product_str = "LSIFC919 B0";
1438 break;
1439 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1440 product_str = "LSIFC929 B0";
1441 break;
1442 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1443 if (revision < 0x80)
1444 product_str = "LSIFC919X A0";
1445 else
1446 product_str = "LSIFC919XL A1";
1447 break;
1448 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1449 if (revision < 0x80)
1450 product_str = "LSIFC929X A0";
1451 else
1452 product_str = "LSIFC929XL A1";
1453 break;
1454 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1455 product_str = "LSIFC939X A1";
1456 break;
1457 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1458 product_str = "LSIFC949X A1";
1459 break;
1460 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1461 switch (revision)
1462 {
1463 case 0x00:
1464 product_str = "LSIFC949E A0";
1465 break;
1466 case 0x01:
1467 product_str = "LSIFC949E A1";
1468 break;
1469 default:
1470 product_str = "LSIFC949E";
1471 break;
1472 }
1473 break;
1474 case MPI_MANUFACTPAGE_DEVID_53C1030:
1475 switch (revision)
1476 {
1477 case 0x00:
1478 product_str = "LSI53C1030 A0";
1479 break;
1480 case 0x01:
1481 product_str = "LSI53C1030 B0";
1482 break;
1483 case 0x03:
1484 product_str = "LSI53C1030 B1";
1485 break;
1486 case 0x07:
1487 product_str = "LSI53C1030 B2";
1488 break;
1489 case 0x08:
1490 product_str = "LSI53C1030 C0";
1491 break;
1492 case 0x80:
1493 product_str = "LSI53C1030T A0";
1494 break;
1495 case 0x83:
1496 product_str = "LSI53C1030T A2";
1497 break;
1498 case 0x87:
1499 product_str = "LSI53C1030T A3";
1500 break;
1501 case 0xc1:
1502 product_str = "LSI53C1020A A1";
1503 break;
1504 default:
1505 product_str = "LSI53C1030";
1506 break;
1507 }
1508 break;
1509 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1510 switch (revision)
1511 {
1512 case 0x03:
1513 product_str = "LSI53C1035 A2";
1514 break;
1515 case 0x04:
1516 product_str = "LSI53C1035 B0";
1517 break;
1518 default:
1519 product_str = "LSI53C1035";
1520 break;
1521 }
1522 break;
1523 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1524 switch (revision)
1525 {
1526 case 0x00:
1527 product_str = "LSISAS1064 A1";
1528 break;
1529 case 0x01:
1530 product_str = "LSISAS1064 A2";
1531 break;
1532 case 0x02:
1533 product_str = "LSISAS1064 A3";
1534 break;
1535 case 0x03:
1536 product_str = "LSISAS1064 A4";
1537 break;
1538 default:
1539 product_str = "LSISAS1064";
1540 break;
1541 }
1542 break;
1543 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1544 switch (revision)
1545 {
1546 case 0x00:
1547 product_str = "LSISAS1064E A0";
1548 break;
1549 case 0x01:
1550 product_str = "LSISAS1064E B0";
1551 break;
1552 case 0x02:
1553 product_str = "LSISAS1064E B1";
1554 break;
1555 case 0x04:
1556 product_str = "LSISAS1064E B2";
1557 break;
1558 case 0x08:
1559 product_str = "LSISAS1064E B3";
1560 break;
1561 default:
1562 product_str = "LSISAS1064E";
1563 break;
1564 }
1565 break;
1566 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1567 switch (revision)
1568 {
1569 case 0x00:
1570 product_str = "LSISAS1068 A0";
1571 break;
1572 case 0x01:
1573 product_str = "LSISAS1068 B0";
1574 break;
1575 case 0x02:
1576 product_str = "LSISAS1068 B1";
1577 break;
1578 default:
1579 product_str = "LSISAS1068";
1580 break;
1581 }
1582 break;
1583 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1584 switch (revision)
1585 {
1586 case 0x00:
1587 product_str = "LSISAS1068E A0";
1588 break;
1589 case 0x01:
1590 product_str = "LSISAS1068E B0";
1591 break;
1592 case 0x02:
1593 product_str = "LSISAS1068E B1";
1594 break;
1595 case 0x04:
1596 product_str = "LSISAS1068E B2";
1597 break;
1598 case 0x08:
1599 product_str = "LSISAS1068E B3";
1600 break;
1601 default:
1602 product_str = "LSISAS1068E";
1603 break;
1604 }
1605 break;
1606 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1607 switch (revision)
1608 {
1609 case 0x00:
1610 product_str = "LSISAS1078 A0";
1611 break;
1612 case 0x01:
1613 product_str = "LSISAS1078 B0";
1614 break;
1615 case 0x02:
1616 product_str = "LSISAS1078 C0";
1617 break;
1618 case 0x03:
1619 product_str = "LSISAS1078 C1";
1620 break;
1621 case 0x04:
1622 product_str = "LSISAS1078 C2";
1623 break;
1624 default:
1625 product_str = "LSISAS1078";
1626 break;
1627 }
1628 break;
1629 }
1630
1631 out:
1632 return product_str;
1633}
1634
1635/**
1636 * mpt_mapresources - map in memory mapped io
1637 * @ioc: Pointer to pointer to IOC adapter
1638 *
1639 **/
1640static int
1641mpt_mapresources(MPT_ADAPTER *ioc)
1642{
1643 u8 __iomem *mem;
1644 int ii;
1645 resource_size_t mem_phys;
1646 unsigned long port;
1647 u32 msize;
1648 u32 psize;
1649 int r = -ENODEV;
1650 struct pci_dev *pdev;
1651
1652 pdev = ioc->pcidev;
1653 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1654 if (pci_enable_device_mem(pdev)) {
1655 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1656 "failed\n", ioc->name);
1657 return r;
1658 }
1659 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1660 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1661 "MEM failed\n", ioc->name);
1662 goto out_pci_disable_device;
1663 }
1664
1665 if (sizeof(dma_addr_t) > 4) {
1666 const uint64_t required_mask = dma_get_required_mask
1667 (&pdev->dev);
1668 if (required_mask > DMA_BIT_MASK(32)
1669 && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
1670 && !pci_set_consistent_dma_mask(pdev,
1671 DMA_BIT_MASK(64))) {
1672 ioc->dma_mask = DMA_BIT_MASK(64);
1673 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1674 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1675 ioc->name));
1676 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1677 && !pci_set_consistent_dma_mask(pdev,
1678 DMA_BIT_MASK(32))) {
1679 ioc->dma_mask = DMA_BIT_MASK(32);
1680 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1681 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1682 ioc->name));
1683 } else {
1684 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1685 ioc->name, pci_name(pdev));
1686 goto out_pci_release_region;
1687 }
1688 } else {
1689 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1690 && !pci_set_consistent_dma_mask(pdev,
1691 DMA_BIT_MASK(32))) {
1692 ioc->dma_mask = DMA_BIT_MASK(32);
1693 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1694 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1695 ioc->name));
1696 } else {
1697 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1698 ioc->name, pci_name(pdev));
1699 goto out_pci_release_region;
1700 }
1701 }
1702
1703 mem_phys = msize = 0;
1704 port = psize = 0;
1705 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1706 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1707 if (psize)
1708 continue;
1709 /* Get I/O space! */
1710 port = pci_resource_start(pdev, ii);
1711 psize = pci_resource_len(pdev, ii);
1712 } else {
1713 if (msize)
1714 continue;
1715 /* Get memmap */
1716 mem_phys = pci_resource_start(pdev, ii);
1717 msize = pci_resource_len(pdev, ii);
1718 }
1719 }
1720 ioc->mem_size = msize;
1721
1722 mem = NULL;
1723 /* Get logical ptr for PciMem0 space */
1724 /*mem = ioremap(mem_phys, msize);*/
1725 mem = ioremap(mem_phys, msize);
1726 if (mem == NULL) {
1727 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1728 " memory!\n", ioc->name);
1729 r = -EINVAL;
1730 goto out_pci_release_region;
1731 }
1732 ioc->memmap = mem;
1733 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1734 ioc->name, mem, (unsigned long long)mem_phys));
1735
1736 ioc->mem_phys = mem_phys;
1737 ioc->chip = (SYSIF_REGS __iomem *)mem;
1738
1739 /* Save Port IO values in case we need to do downloadboot */
1740 ioc->pio_mem_phys = port;
1741 ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1742
1743 return 0;
1744
1745out_pci_release_region:
1746 pci_release_selected_regions(pdev, ioc->bars);
1747out_pci_disable_device:
1748 pci_disable_device(pdev);
1749 return r;
1750}
1751
1752/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1753/**
1754 * mpt_attach - Install a PCI intelligent MPT adapter.
1755 * @pdev: Pointer to pci_dev structure
1756 * @id: PCI device ID information
1757 *
1758 * This routine performs all the steps necessary to bring the IOC of
1759 * a MPT adapter to a OPERATIONAL state. This includes registering
1760 * memory regions, registering the interrupt, and allocating request
1761 * and reply memory pools.
1762 *
1763 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1764 * MPT adapter.
1765 *
1766 * Returns 0 for success, non-zero for failure.
1767 *
1768 * TODO: Add support for polled controllers
1769 */
1770int
1771mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1772{
1773 MPT_ADAPTER *ioc;
1774 u8 cb_idx;
1775 int r = -ENODEV;
1776 u8 pcixcmd;
1777 static int mpt_ids = 0;
1778#ifdef CONFIG_PROC_FS
1779 struct proc_dir_entry *dent;
1780#endif
1781
1782 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_KERNEL);
1783 if (ioc == NULL) {
1784 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1785 return -ENOMEM;
1786 }
1787
1788 ioc->id = mpt_ids++;
1789 sprintf(ioc->name, "ioc%d", ioc->id);
1790 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1791
1792 /*
1793 * set initial debug level
1794 * (refer to mptdebug.h)
1795 *
1796 */
1797 ioc->debug_level = mpt_debug_level;
1798 if (mpt_debug_level)
1799 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1800
1801 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1802
1803 ioc->pcidev = pdev;
1804 if (mpt_mapresources(ioc)) {
1805 goto out_free_ioc;
1806 }
1807
1808 /*
1809 * Setting up proper handlers for scatter gather handling
1810 */
1811 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1812 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1813 ioc->add_sge = &mpt_add_sge_64bit_1078;
1814 else
1815 ioc->add_sge = &mpt_add_sge_64bit;
1816 ioc->add_chain = &mpt_add_chain_64bit;
1817 ioc->sg_addr_size = 8;
1818 } else {
1819 ioc->add_sge = &mpt_add_sge;
1820 ioc->add_chain = &mpt_add_chain;
1821 ioc->sg_addr_size = 4;
1822 }
1823 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1824
1825 ioc->alloc_total = sizeof(MPT_ADAPTER);
1826 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1827 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1828
1829
1830 spin_lock_init(&ioc->taskmgmt_lock);
1831 mutex_init(&ioc->internal_cmds.mutex);
1832 init_completion(&ioc->internal_cmds.done);
1833 mutex_init(&ioc->mptbase_cmds.mutex);
1834 init_completion(&ioc->mptbase_cmds.done);
1835 mutex_init(&ioc->taskmgmt_cmds.mutex);
1836 init_completion(&ioc->taskmgmt_cmds.done);
1837
1838 /* Initialize the event logging.
1839 */
1840 ioc->eventTypes = 0; /* None */
1841 ioc->eventContext = 0;
1842 ioc->eventLogSize = 0;
1843 ioc->events = NULL;
1844
1845#ifdef MFCNT
1846 ioc->mfcnt = 0;
1847#endif
1848
1849 ioc->sh = NULL;
1850 ioc->cached_fw = NULL;
1851
1852 /* Initialize SCSI Config Data structure
1853 */
1854 memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1855
1856 /* Initialize the fc rport list head.
1857 */
1858 INIT_LIST_HEAD(&ioc->fc_rports);
1859
1860 /* Find lookup slot. */
1861 INIT_LIST_HEAD(&ioc->list);
1862
1863
1864 /* Initialize workqueue */
1865 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1866
1867 snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
1868 "mpt_poll_%d", ioc->id);
1869 ioc->reset_work_q = alloc_workqueue(ioc->reset_work_q_name,
1870 WQ_MEM_RECLAIM, 0);
1871 if (!ioc->reset_work_q) {
1872 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1873 ioc->name);
1874 r = -ENOMEM;
1875 goto out_unmap_resources;
1876 }
1877
1878 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1879 ioc->name, &ioc->facts, &ioc->pfacts[0]));
1880
1881 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device,
1882 pdev->revision);
1883
1884 switch (pdev->device)
1885 {
1886 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1887 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1888 ioc->errata_flag_1064 = 1;
1889 fallthrough;
1890 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1891 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1892 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1893 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1894 ioc->bus_type = FC;
1895 break;
1896
1897 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1898 if (pdev->revision < XL_929) {
1899 /* 929X Chip Fix. Set Split transactions level
1900 * for PCIX. Set MOST bits to zero.
1901 */
1902 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1903 pcixcmd &= 0x8F;
1904 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1905 } else {
1906 /* 929XL Chip Fix. Set MMRBC to 0x08.
1907 */
1908 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1909 pcixcmd |= 0x08;
1910 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1911 }
1912 ioc->bus_type = FC;
1913 break;
1914
1915 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1916 /* 919X Chip Fix. Set Split transactions level
1917 * for PCIX. Set MOST bits to zero.
1918 */
1919 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1920 pcixcmd &= 0x8F;
1921 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1922 ioc->bus_type = FC;
1923 break;
1924
1925 case MPI_MANUFACTPAGE_DEVID_53C1030:
1926 /* 1030 Chip Fix. Disable Split transactions
1927 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1928 */
1929 if (pdev->revision < C0_1030) {
1930 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1931 pcixcmd &= 0x8F;
1932 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1933 }
1934 fallthrough;
1935
1936 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1937 ioc->bus_type = SPI;
1938 break;
1939
1940 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1941 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1942 ioc->errata_flag_1064 = 1;
1943 ioc->bus_type = SAS;
1944 break;
1945
1946 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1947 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1948 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1949 ioc->bus_type = SAS;
1950 break;
1951 }
1952
1953
1954 switch (ioc->bus_type) {
1955
1956 case SAS:
1957 ioc->msi_enable = mpt_msi_enable_sas;
1958 break;
1959
1960 case SPI:
1961 ioc->msi_enable = mpt_msi_enable_spi;
1962 break;
1963
1964 case FC:
1965 ioc->msi_enable = mpt_msi_enable_fc;
1966 break;
1967
1968 default:
1969 ioc->msi_enable = 0;
1970 break;
1971 }
1972
1973 ioc->fw_events_off = 1;
1974
1975 if (ioc->errata_flag_1064)
1976 pci_disable_io_access(pdev);
1977
1978 spin_lock_init(&ioc->FreeQlock);
1979
1980 /* Disable all! */
1981 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1982 ioc->active = 0;
1983 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1984
1985 /* Set IOC ptr in the pcidev's driver data. */
1986 pci_set_drvdata(ioc->pcidev, ioc);
1987
1988 /* Set lookup ptr. */
1989 list_add_tail(&ioc->list, &ioc_list);
1990
1991 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1992 */
1993 mpt_detect_bound_ports(ioc, pdev);
1994
1995 INIT_LIST_HEAD(&ioc->fw_event_list);
1996 spin_lock_init(&ioc->fw_event_lock);
1997 snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
1998 ioc->fw_event_q = alloc_workqueue(ioc->fw_event_q_name,
1999 WQ_MEM_RECLAIM, 0);
2000 if (!ioc->fw_event_q) {
2001 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
2002 ioc->name);
2003 r = -ENOMEM;
2004 goto out_remove_ioc;
2005 }
2006
2007 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2008 CAN_SLEEP)) != 0){
2009 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
2010 ioc->name, r);
2011
2012 destroy_workqueue(ioc->fw_event_q);
2013 ioc->fw_event_q = NULL;
2014
2015 list_del(&ioc->list);
2016 if (ioc->alt_ioc)
2017 ioc->alt_ioc->alt_ioc = NULL;
2018 iounmap(ioc->memmap);
2019 if (pci_is_enabled(pdev))
2020 pci_disable_device(pdev);
2021 if (r != -5)
2022 pci_release_selected_regions(pdev, ioc->bars);
2023
2024 destroy_workqueue(ioc->reset_work_q);
2025 ioc->reset_work_q = NULL;
2026
2027 kfree(ioc);
2028 return r;
2029 }
2030
2031 /* call per device driver probe entry point */
2032 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2033 if(MptDeviceDriverHandlers[cb_idx] &&
2034 MptDeviceDriverHandlers[cb_idx]->probe) {
2035 MptDeviceDriverHandlers[cb_idx]->probe(pdev,id);
2036 }
2037 }
2038
2039#ifdef CONFIG_PROC_FS
2040 /*
2041 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2042 */
2043 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2044 if (dent) {
2045 proc_create_single_data("info", S_IRUGO, dent,
2046 mpt_iocinfo_proc_show, ioc);
2047 proc_create_single_data("summary", S_IRUGO, dent,
2048 mpt_summary_proc_show, ioc);
2049 }
2050#endif
2051
2052 if (!ioc->alt_ioc)
2053 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2054 msecs_to_jiffies(MPT_POLLING_INTERVAL));
2055
2056 return 0;
2057
2058out_remove_ioc:
2059 list_del(&ioc->list);
2060 if (ioc->alt_ioc)
2061 ioc->alt_ioc->alt_ioc = NULL;
2062
2063 destroy_workqueue(ioc->reset_work_q);
2064 ioc->reset_work_q = NULL;
2065
2066out_unmap_resources:
2067 iounmap(ioc->memmap);
2068 pci_disable_device(pdev);
2069 pci_release_selected_regions(pdev, ioc->bars);
2070
2071out_free_ioc:
2072 kfree(ioc);
2073
2074 return r;
2075}
2076
2077/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2078/**
2079 * mpt_detach - Remove a PCI intelligent MPT adapter.
2080 * @pdev: Pointer to pci_dev structure
2081 */
2082
2083void
2084mpt_detach(struct pci_dev *pdev)
2085{
2086 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2087 char pname[64];
2088 u8 cb_idx;
2089 unsigned long flags;
2090 struct workqueue_struct *wq;
2091
2092 /*
2093 * Stop polling ioc for fault condition
2094 */
2095 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2096 wq = ioc->reset_work_q;
2097 ioc->reset_work_q = NULL;
2098 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2099 cancel_delayed_work(&ioc->fault_reset_work);
2100 destroy_workqueue(wq);
2101
2102 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2103 wq = ioc->fw_event_q;
2104 ioc->fw_event_q = NULL;
2105 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2106 destroy_workqueue(wq);
2107
2108 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2109 remove_proc_entry(pname, NULL);
2110 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2111 remove_proc_entry(pname, NULL);
2112 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2113 remove_proc_entry(pname, NULL);
2114
2115 /* call per device driver remove entry point */
2116 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2117 if(MptDeviceDriverHandlers[cb_idx] &&
2118 MptDeviceDriverHandlers[cb_idx]->remove) {
2119 MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2120 }
2121 }
2122
2123 /* Disable interrupts! */
2124 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2125
2126 ioc->active = 0;
2127 synchronize_irq(pdev->irq);
2128
2129 /* Clear any lingering interrupt */
2130 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2131
2132 CHIPREG_READ32(&ioc->chip->IntStatus);
2133
2134 mpt_adapter_dispose(ioc);
2135
2136}
2137
2138/**************************************************************************
2139 * Power Management
2140 */
2141#ifdef CONFIG_PM
2142/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2143/**
2144 * mpt_suspend - Fusion MPT base driver suspend routine.
2145 * @pdev: Pointer to pci_dev structure
2146 * @state: new state to enter
2147 */
2148int
2149mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2150{
2151 u32 device_state;
2152 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2153
2154 device_state = pci_choose_state(pdev, state);
2155 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2156 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2157 device_state);
2158
2159 /* put ioc into READY_STATE */
2160 if (SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2161 printk(MYIOC_s_ERR_FMT
2162 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
2163 }
2164
2165 /* disable interrupts */
2166 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2167 ioc->active = 0;
2168
2169 /* Clear any lingering interrupt */
2170 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2171
2172 free_irq(ioc->pci_irq, ioc);
2173 if (ioc->msi_enable)
2174 pci_disable_msi(ioc->pcidev);
2175 ioc->pci_irq = -1;
2176 pci_save_state(pdev);
2177 pci_disable_device(pdev);
2178 pci_release_selected_regions(pdev, ioc->bars);
2179 pci_set_power_state(pdev, device_state);
2180 return 0;
2181}
2182
2183/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2184/**
2185 * mpt_resume - Fusion MPT base driver resume routine.
2186 * @pdev: Pointer to pci_dev structure
2187 */
2188int
2189mpt_resume(struct pci_dev *pdev)
2190{
2191 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2192 u32 device_state = pdev->current_state;
2193 int recovery_state;
2194 int err;
2195
2196 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2197 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2198 device_state);
2199
2200 pci_set_power_state(pdev, PCI_D0);
2201 pci_enable_wake(pdev, PCI_D0, 0);
2202 pci_restore_state(pdev);
2203 ioc->pcidev = pdev;
2204 err = mpt_mapresources(ioc);
2205 if (err)
2206 return err;
2207
2208 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2209 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2210 ioc->add_sge = &mpt_add_sge_64bit_1078;
2211 else
2212 ioc->add_sge = &mpt_add_sge_64bit;
2213 ioc->add_chain = &mpt_add_chain_64bit;
2214 ioc->sg_addr_size = 8;
2215 } else {
2216
2217 ioc->add_sge = &mpt_add_sge;
2218 ioc->add_chain = &mpt_add_chain;
2219 ioc->sg_addr_size = 4;
2220 }
2221 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2222
2223 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2224 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2225 CHIPREG_READ32(&ioc->chip->Doorbell));
2226
2227 /*
2228 * Errata workaround for SAS pci express:
2229 * Upon returning to the D0 state, the contents of the doorbell will be
2230 * stale data, and this will incorrectly signal to the host driver that
2231 * the firmware is ready to process mpt commands. The workaround is
2232 * to issue a diagnostic reset.
2233 */
2234 if (ioc->bus_type == SAS && (pdev->device ==
2235 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2236 MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2237 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2238 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2239 ioc->name);
2240 goto out;
2241 }
2242 }
2243
2244 /* bring ioc to operational state */
2245 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2246 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2247 CAN_SLEEP);
2248 if (recovery_state != 0)
2249 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2250 "error:[%x]\n", ioc->name, recovery_state);
2251 else
2252 printk(MYIOC_s_INFO_FMT
2253 "pci-resume: success\n", ioc->name);
2254 out:
2255 return 0;
2256
2257}
2258#endif
2259
2260static int
2261mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2262{
2263 if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2264 ioc->bus_type != SPI) ||
2265 (MptDriverClass[index] == MPTFC_DRIVER &&
2266 ioc->bus_type != FC) ||
2267 (MptDriverClass[index] == MPTSAS_DRIVER &&
2268 ioc->bus_type != SAS))
2269 /* make sure we only call the relevant reset handler
2270 * for the bus */
2271 return 0;
2272 return (MptResetHandlers[index])(ioc, reset_phase);
2273}
2274
2275/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2276/**
2277 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2278 * @ioc: Pointer to MPT adapter structure
2279 * @reason: Event word / reason
2280 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2281 *
2282 * This routine performs all the steps necessary to bring the IOC
2283 * to a OPERATIONAL state.
2284 *
2285 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
2286 * MPT adapter.
2287 *
2288 * Returns:
2289 * 0 for success
2290 * -1 if failed to get board READY
2291 * -2 if READY but IOCFacts Failed
2292 * -3 if READY but PrimeIOCFifos Failed
2293 * -4 if READY but IOCInit Failed
2294 * -5 if failed to enable_device and/or request_selected_regions
2295 * -6 if failed to upload firmware
2296 */
2297static int
2298mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2299{
2300 int hard_reset_done = 0;
2301 int alt_ioc_ready = 0;
2302 int hard;
2303 int rc=0;
2304 int ii;
2305 int ret = 0;
2306 int reset_alt_ioc_active = 0;
2307 int irq_allocated = 0;
2308 u8 *a;
2309
2310 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2311 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2312
2313 /* Disable reply interrupts (also blocks FreeQ) */
2314 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2315 ioc->active = 0;
2316
2317 if (ioc->alt_ioc) {
2318 if (ioc->alt_ioc->active ||
2319 reason == MPT_HOSTEVENT_IOC_RECOVER) {
2320 reset_alt_ioc_active = 1;
2321 /* Disable alt-IOC's reply interrupts
2322 * (and FreeQ) for a bit
2323 **/
2324 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2325 0xFFFFFFFF);
2326 ioc->alt_ioc->active = 0;
2327 }
2328 }
2329
2330 hard = 1;
2331 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2332 hard = 0;
2333
2334 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2335 if (hard_reset_done == -4) {
2336 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2337 ioc->name);
2338
2339 if (reset_alt_ioc_active && ioc->alt_ioc) {
2340 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2341 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2342 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2343 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2344 ioc->alt_ioc->active = 1;
2345 }
2346
2347 } else {
2348 printk(MYIOC_s_WARN_FMT
2349 "NOT READY WARNING!\n", ioc->name);
2350 }
2351 ret = -1;
2352 goto out;
2353 }
2354
2355 /* hard_reset_done = 0 if a soft reset was performed
2356 * and 1 if a hard reset was performed.
2357 */
2358 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2359 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2360 alt_ioc_ready = 1;
2361 else
2362 printk(MYIOC_s_WARN_FMT
2363 ": alt-ioc Not ready WARNING!\n",
2364 ioc->alt_ioc->name);
2365 }
2366
2367 for (ii=0; ii<5; ii++) {
2368 /* Get IOC facts! Allow 5 retries */
2369 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2370 break;
2371 }
2372
2373
2374 if (ii == 5) {
2375 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2376 "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2377 ret = -2;
2378 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2379 MptDisplayIocCapabilities(ioc);
2380 }
2381
2382 if (alt_ioc_ready) {
2383 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2384 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2385 "Initial Alt IocFacts failed rc=%x\n",
2386 ioc->name, rc));
2387 /* Retry - alt IOC was initialized once
2388 */
2389 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2390 }
2391 if (rc) {
2392 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2393 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2394 alt_ioc_ready = 0;
2395 reset_alt_ioc_active = 0;
2396 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2397 MptDisplayIocCapabilities(ioc->alt_ioc);
2398 }
2399 }
2400
2401 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2402 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2403 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2404 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2405 IORESOURCE_IO);
2406 if (pci_enable_device(ioc->pcidev))
2407 return -5;
2408 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2409 "mpt"))
2410 return -5;
2411 }
2412
2413 /*
2414 * Device is reset now. It must have de-asserted the interrupt line
2415 * (if it was asserted) and it should be safe to register for the
2416 * interrupt now.
2417 */
2418 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2419 ioc->pci_irq = -1;
2420 if (ioc->pcidev->irq) {
2421 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2422 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2423 ioc->name);
2424 else
2425 ioc->msi_enable = 0;
2426 rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2427 IRQF_SHARED, ioc->name, ioc);
2428 if (rc < 0) {
2429 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2430 "interrupt %d!\n",
2431 ioc->name, ioc->pcidev->irq);
2432 if (ioc->msi_enable)
2433 pci_disable_msi(ioc->pcidev);
2434 ret = -EBUSY;
2435 goto out;
2436 }
2437 irq_allocated = 1;
2438 ioc->pci_irq = ioc->pcidev->irq;
2439 pci_set_master(ioc->pcidev); /* ?? */
2440 pci_set_drvdata(ioc->pcidev, ioc);
2441 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2442 "installed at interrupt %d\n", ioc->name,
2443 ioc->pcidev->irq));
2444 }
2445 }
2446
2447 /* Prime reply & request queues!
2448 * (mucho alloc's) Must be done prior to
2449 * init as upper addresses are needed for init.
2450 * If fails, continue with alt-ioc processing
2451 */
2452 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2453 ioc->name));
2454 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2455 ret = -3;
2456
2457 /* May need to check/upload firmware & data here!
2458 * If fails, continue with alt-ioc processing
2459 */
2460 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2461 ioc->name));
2462 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2463 ret = -4;
2464// NEW!
2465 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2466 printk(MYIOC_s_WARN_FMT
2467 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2468 ioc->alt_ioc->name, rc);
2469 alt_ioc_ready = 0;
2470 reset_alt_ioc_active = 0;
2471 }
2472
2473 if (alt_ioc_ready) {
2474 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2475 alt_ioc_ready = 0;
2476 reset_alt_ioc_active = 0;
2477 printk(MYIOC_s_WARN_FMT
2478 ": alt-ioc: (%d) init failure WARNING!\n",
2479 ioc->alt_ioc->name, rc);
2480 }
2481 }
2482
2483 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2484 if (ioc->upload_fw) {
2485 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2486 "firmware upload required!\n", ioc->name));
2487
2488 /* Controller is not operational, cannot do upload
2489 */
2490 if (ret == 0) {
2491 rc = mpt_do_upload(ioc, sleepFlag);
2492 if (rc == 0) {
2493 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2494 /*
2495 * Maintain only one pointer to FW memory
2496 * so there will not be two attempt to
2497 * downloadboot onboard dual function
2498 * chips (mpt_adapter_disable,
2499 * mpt_diag_reset)
2500 */
2501 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2502 "mpt_upload: alt_%s has cached_fw=%p \n",
2503 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2504 ioc->cached_fw = NULL;
2505 }
2506 } else {
2507 printk(MYIOC_s_WARN_FMT
2508 "firmware upload failure!\n", ioc->name);
2509 ret = -6;
2510 }
2511 }
2512 }
2513 }
2514
2515 /* Enable MPT base driver management of EventNotification
2516 * and EventAck handling.
2517 */
2518 if ((ret == 0) && (!ioc->facts.EventState)) {
2519 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2520 "SendEventNotification\n",
2521 ioc->name));
2522 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2523 }
2524
2525 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2526 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2527
2528 if (ret == 0) {
2529 /* Enable! (reply interrupt) */
2530 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2531 ioc->active = 1;
2532 }
2533 if (rc == 0) { /* alt ioc */
2534 if (reset_alt_ioc_active && ioc->alt_ioc) {
2535 /* (re)Enable alt-IOC! (reply interrupt) */
2536 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2537 "reply irq re-enabled\n",
2538 ioc->alt_ioc->name));
2539 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2540 MPI_HIM_DIM);
2541 ioc->alt_ioc->active = 1;
2542 }
2543 }
2544
2545
2546 /* Add additional "reason" check before call to GetLanConfigPages
2547 * (combined with GetIoUnitPage2 call). This prevents a somewhat
2548 * recursive scenario; GetLanConfigPages times out, timer expired
2549 * routine calls HardResetHandler, which calls into here again,
2550 * and we try GetLanConfigPages again...
2551 */
2552 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2553
2554 /*
2555 * Initialize link list for inactive raid volumes.
2556 */
2557 mutex_init(&ioc->raid_data.inactive_list_mutex);
2558 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2559
2560 switch (ioc->bus_type) {
2561
2562 case SAS:
2563 /* clear persistency table */
2564 if(ioc->facts.IOCExceptions &
2565 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2566 ret = mptbase_sas_persist_operation(ioc,
2567 MPI_SAS_OP_CLEAR_NOT_PRESENT);
2568 if(ret != 0)
2569 goto out;
2570 }
2571
2572 /* Find IM volumes
2573 */
2574 mpt_findImVolumes(ioc);
2575
2576 /* Check, and possibly reset, the coalescing value
2577 */
2578 mpt_read_ioc_pg_1(ioc);
2579
2580 break;
2581
2582 case FC:
2583 if ((ioc->pfacts[0].ProtocolFlags &
2584 MPI_PORTFACTS_PROTOCOL_LAN) &&
2585 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2586 /*
2587 * Pre-fetch the ports LAN MAC address!
2588 * (LANPage1_t stuff)
2589 */
2590 (void) GetLanConfigPages(ioc);
2591 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2592 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2593 "LanAddr = %pMR\n", ioc->name, a));
2594 }
2595 break;
2596
2597 case SPI:
2598 /* Get NVRAM and adapter maximums from SPP 0 and 2
2599 */
2600 mpt_GetScsiPortSettings(ioc, 0);
2601
2602 /* Get version and length of SDP 1
2603 */
2604 mpt_readScsiDevicePageHeaders(ioc, 0);
2605
2606 /* Find IM volumes
2607 */
2608 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2609 mpt_findImVolumes(ioc);
2610
2611 /* Check, and possibly reset, the coalescing value
2612 */
2613 mpt_read_ioc_pg_1(ioc);
2614
2615 mpt_read_ioc_pg_4(ioc);
2616
2617 break;
2618 }
2619
2620 GetIoUnitPage2(ioc);
2621 mpt_get_manufacturing_pg_0(ioc);
2622 }
2623
2624 out:
2625 if ((ret != 0) && irq_allocated) {
2626 free_irq(ioc->pci_irq, ioc);
2627 if (ioc->msi_enable)
2628 pci_disable_msi(ioc->pcidev);
2629 }
2630 return ret;
2631}
2632
2633/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2634/**
2635 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2636 * @ioc: Pointer to MPT adapter structure
2637 * @pdev: Pointer to (struct pci_dev) structure
2638 *
2639 * Search for PCI bus/dev_function which matches
2640 * PCI bus/dev_function (+/-1) for newly discovered 929,
2641 * 929X, 1030 or 1035.
2642 *
2643 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2644 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2645 */
2646static void
2647mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2648{
2649 struct pci_dev *peer=NULL;
2650 unsigned int slot = PCI_SLOT(pdev->devfn);
2651 unsigned int func = PCI_FUNC(pdev->devfn);
2652 MPT_ADAPTER *ioc_srch;
2653
2654 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2655 " searching for devfn match on %x or %x\n",
2656 ioc->name, pci_name(pdev), pdev->bus->number,
2657 pdev->devfn, func-1, func+1));
2658
2659 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2660 if (!peer) {
2661 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2662 if (!peer)
2663 return;
2664 }
2665
2666 list_for_each_entry(ioc_srch, &ioc_list, list) {
2667 struct pci_dev *_pcidev = ioc_srch->pcidev;
2668 if (_pcidev == peer) {
2669 /* Paranoia checks */
2670 if (ioc->alt_ioc != NULL) {
2671 printk(MYIOC_s_WARN_FMT
2672 "Oops, already bound (%s <==> %s)!\n",
2673 ioc->name, ioc->name, ioc->alt_ioc->name);
2674 break;
2675 } else if (ioc_srch->alt_ioc != NULL) {
2676 printk(MYIOC_s_WARN_FMT
2677 "Oops, already bound (%s <==> %s)!\n",
2678 ioc_srch->name, ioc_srch->name,
2679 ioc_srch->alt_ioc->name);
2680 break;
2681 }
2682 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2683 "FOUND! binding %s <==> %s\n",
2684 ioc->name, ioc->name, ioc_srch->name));
2685 ioc_srch->alt_ioc = ioc;
2686 ioc->alt_ioc = ioc_srch;
2687 }
2688 }
2689 pci_dev_put(peer);
2690}
2691
2692/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2693/**
2694 * mpt_adapter_disable - Disable misbehaving MPT adapter.
2695 * @ioc: Pointer to MPT adapter structure
2696 */
2697static void
2698mpt_adapter_disable(MPT_ADAPTER *ioc)
2699{
2700 int sz;
2701 int ret;
2702
2703 if (ioc->cached_fw != NULL) {
2704 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2705 "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2706 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2707 ioc->cached_fw, CAN_SLEEP)) < 0) {
2708 printk(MYIOC_s_WARN_FMT
2709 ": firmware downloadboot failure (%d)!\n",
2710 ioc->name, ret);
2711 }
2712 }
2713
2714 /*
2715 * Put the controller into ready state (if its not already)
2716 */
2717 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2718 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2719 CAN_SLEEP)) {
2720 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2721 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
2722 "reset failed to put ioc in ready state!\n",
2723 ioc->name, __func__);
2724 } else
2725 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
2726 "failed!\n", ioc->name, __func__);
2727 }
2728
2729
2730 /* Disable adapter interrupts! */
2731 synchronize_irq(ioc->pcidev->irq);
2732 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2733 ioc->active = 0;
2734
2735 /* Clear any lingering interrupt */
2736 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2737 CHIPREG_READ32(&ioc->chip->IntStatus);
2738
2739 if (ioc->alloc != NULL) {
2740 sz = ioc->alloc_sz;
2741 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
2742 ioc->name, ioc->alloc, ioc->alloc_sz));
2743 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc,
2744 ioc->alloc_dma);
2745 ioc->reply_frames = NULL;
2746 ioc->req_frames = NULL;
2747 ioc->alloc = NULL;
2748 ioc->alloc_total -= sz;
2749 }
2750
2751 if (ioc->sense_buf_pool != NULL) {
2752 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2753 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool,
2754 ioc->sense_buf_pool_dma);
2755 ioc->sense_buf_pool = NULL;
2756 ioc->alloc_total -= sz;
2757 }
2758
2759 if (ioc->events != NULL){
2760 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2761 kfree(ioc->events);
2762 ioc->events = NULL;
2763 ioc->alloc_total -= sz;
2764 }
2765
2766 mpt_free_fw_memory(ioc);
2767
2768 kfree(ioc->spi_data.nvram);
2769 mpt_inactive_raid_list_free(ioc);
2770 kfree(ioc->raid_data.pIocPg2);
2771 kfree(ioc->raid_data.pIocPg3);
2772 ioc->spi_data.nvram = NULL;
2773 ioc->raid_data.pIocPg3 = NULL;
2774
2775 if (ioc->spi_data.pIocPg4 != NULL) {
2776 sz = ioc->spi_data.IocPg4Sz;
2777 pci_free_consistent(ioc->pcidev, sz,
2778 ioc->spi_data.pIocPg4,
2779 ioc->spi_data.IocPg4_dma);
2780 ioc->spi_data.pIocPg4 = NULL;
2781 ioc->alloc_total -= sz;
2782 }
2783
2784 if (ioc->ReqToChain != NULL) {
2785 kfree(ioc->ReqToChain);
2786 kfree(ioc->RequestNB);
2787 ioc->ReqToChain = NULL;
2788 }
2789
2790 kfree(ioc->ChainToChain);
2791 ioc->ChainToChain = NULL;
2792
2793 if (ioc->HostPageBuffer != NULL) {
2794 if((ret = mpt_host_page_access_control(ioc,
2795 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2796 printk(MYIOC_s_ERR_FMT
2797 ": %s: host page buffers free failed (%d)!\n",
2798 ioc->name, __func__, ret);
2799 }
2800 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2801 "HostPageBuffer free @ %p, sz=%d bytes\n",
2802 ioc->name, ioc->HostPageBuffer,
2803 ioc->HostPageBuffer_sz));
2804 dma_free_coherent(&ioc->pcidev->dev, ioc->HostPageBuffer_sz,
2805 ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2806 ioc->HostPageBuffer = NULL;
2807 ioc->HostPageBuffer_sz = 0;
2808 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2809 }
2810
2811 pci_set_drvdata(ioc->pcidev, NULL);
2812}
2813/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2814/**
2815 * mpt_adapter_dispose - Free all resources associated with an MPT adapter
2816 * @ioc: Pointer to MPT adapter structure
2817 *
2818 * This routine unregisters h/w resources and frees all alloc'd memory
2819 * associated with a MPT adapter structure.
2820 */
2821static void
2822mpt_adapter_dispose(MPT_ADAPTER *ioc)
2823{
2824 int sz_first, sz_last;
2825
2826 if (ioc == NULL)
2827 return;
2828
2829 sz_first = ioc->alloc_total;
2830
2831 mpt_adapter_disable(ioc);
2832
2833 if (ioc->pci_irq != -1) {
2834 free_irq(ioc->pci_irq, ioc);
2835 if (ioc->msi_enable)
2836 pci_disable_msi(ioc->pcidev);
2837 ioc->pci_irq = -1;
2838 }
2839
2840 if (ioc->memmap != NULL) {
2841 iounmap(ioc->memmap);
2842 ioc->memmap = NULL;
2843 }
2844
2845 pci_disable_device(ioc->pcidev);
2846 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2847
2848 /* Zap the adapter lookup ptr! */
2849 list_del(&ioc->list);
2850
2851 sz_last = ioc->alloc_total;
2852 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2853 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2854
2855 if (ioc->alt_ioc)
2856 ioc->alt_ioc->alt_ioc = NULL;
2857
2858 kfree(ioc);
2859}
2860
2861/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2862/**
2863 * MptDisplayIocCapabilities - Disply IOC's capabilities.
2864 * @ioc: Pointer to MPT adapter structure
2865 */
2866static void
2867MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2868{
2869 int i = 0;
2870
2871 printk(KERN_INFO "%s: ", ioc->name);
2872 if (ioc->prod_name)
2873 pr_cont("%s: ", ioc->prod_name);
2874 pr_cont("Capabilities={");
2875
2876 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2877 pr_cont("Initiator");
2878 i++;
2879 }
2880
2881 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2882 pr_cont("%sTarget", i ? "," : "");
2883 i++;
2884 }
2885
2886 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2887 pr_cont("%sLAN", i ? "," : "");
2888 i++;
2889 }
2890
2891#if 0
2892 /*
2893 * This would probably evoke more questions than it's worth
2894 */
2895 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2896 pr_cont("%sLogBusAddr", i ? "," : "");
2897 i++;
2898 }
2899#endif
2900
2901 pr_cont("}\n");
2902}
2903
2904/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2905/**
2906 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2907 * @ioc: Pointer to MPT_ADAPTER structure
2908 * @force: Force hard KickStart of IOC
2909 * @sleepFlag: Specifies whether the process can sleep
2910 *
2911 * Returns:
2912 * 1 - DIAG reset and READY
2913 * 0 - READY initially OR soft reset and READY
2914 * -1 - Any failure on KickStart
2915 * -2 - Msg Unit Reset Failed
2916 * -3 - IO Unit Reset Failed
2917 * -4 - IOC owned by a PEER
2918 */
2919static int
2920MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2921{
2922 u32 ioc_state;
2923 int statefault = 0;
2924 int cntdn;
2925 int hard_reset_done = 0;
2926 int r;
2927 int ii;
2928 int whoinit;
2929
2930 /* Get current [raw] IOC state */
2931 ioc_state = mpt_GetIocState(ioc, 0);
2932 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2933
2934 /*
2935 * Check to see if IOC got left/stuck in doorbell handshake
2936 * grip of death. If so, hard reset the IOC.
2937 */
2938 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2939 statefault = 1;
2940 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2941 ioc->name);
2942 }
2943
2944 /* Is it already READY? */
2945 if (!statefault &&
2946 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2947 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2948 "IOC is in READY state\n", ioc->name));
2949 return 0;
2950 }
2951
2952 /*
2953 * Check to see if IOC is in FAULT state.
2954 */
2955 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2956 statefault = 2;
2957 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2958 ioc->name);
2959 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
2960 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2961 }
2962
2963 /*
2964 * Hmmm... Did it get left operational?
2965 */
2966 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2967 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2968 ioc->name));
2969
2970 /* Check WhoInit.
2971 * If PCI Peer, exit.
2972 * Else, if no fault conditions are present, issue a MessageUnitReset
2973 * Else, fall through to KickStart case
2974 */
2975 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2976 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2977 "whoinit 0x%x statefault %d force %d\n",
2978 ioc->name, whoinit, statefault, force));
2979 if (whoinit == MPI_WHOINIT_PCI_PEER)
2980 return -4;
2981 else {
2982 if ((statefault == 0 ) && (force == 0)) {
2983 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2984 return 0;
2985 }
2986 statefault = 3;
2987 }
2988 }
2989
2990 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2991 if (hard_reset_done < 0)
2992 return -1;
2993
2994 /*
2995 * Loop here waiting for IOC to come READY.
2996 */
2997 ii = 0;
2998 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
2999
3000 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
3001 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
3002 /*
3003 * BIOS or previous driver load left IOC in OP state.
3004 * Reset messaging FIFOs.
3005 */
3006 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
3007 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
3008 return -2;
3009 }
3010 } else if (ioc_state == MPI_IOC_STATE_RESET) {
3011 /*
3012 * Something is wrong. Try to get IOC back
3013 * to a known state.
3014 */
3015 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3016 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3017 return -3;
3018 }
3019 }
3020
3021 ii++; cntdn--;
3022 if (!cntdn) {
3023 printk(MYIOC_s_ERR_FMT
3024 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3025 ioc->name, ioc_state, (int)((ii+5)/HZ));
3026 return -ETIME;
3027 }
3028
3029 if (sleepFlag == CAN_SLEEP) {
3030 msleep(1);
3031 } else {
3032 mdelay (1); /* 1 msec delay */
3033 }
3034
3035 }
3036
3037 if (statefault < 3) {
3038 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3039 statefault == 1 ? "stuck handshake" : "IOC FAULT");
3040 }
3041
3042 return hard_reset_done;
3043}
3044
3045/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3046/**
3047 * mpt_GetIocState - Get the current state of a MPT adapter.
3048 * @ioc: Pointer to MPT_ADAPTER structure
3049 * @cooked: Request raw or cooked IOC state
3050 *
3051 * Returns all IOC Doorbell register bits if cooked==0, else just the
3052 * Doorbell bits in MPI_IOC_STATE_MASK.
3053 */
3054u32
3055mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3056{
3057 u32 s, sc;
3058
3059 /* Get! */
3060 s = CHIPREG_READ32(&ioc->chip->Doorbell);
3061 sc = s & MPI_IOC_STATE_MASK;
3062
3063 /* Save! */
3064 ioc->last_state = sc;
3065
3066 return cooked ? sc : s;
3067}
3068
3069/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3070/**
3071 * GetIocFacts - Send IOCFacts request to MPT adapter.
3072 * @ioc: Pointer to MPT_ADAPTER structure
3073 * @sleepFlag: Specifies whether the process can sleep
3074 * @reason: If recovery, only update facts.
3075 *
3076 * Returns 0 for success, non-zero for failure.
3077 */
3078static int
3079GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3080{
3081 IOCFacts_t get_facts;
3082 IOCFactsReply_t *facts;
3083 int r;
3084 int req_sz;
3085 int reply_sz;
3086 int sz;
3087 u32 vv;
3088 u8 shiftFactor=1;
3089
3090 /* IOC *must* NOT be in RESET state! */
3091 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3092 printk(KERN_ERR MYNAM
3093 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3094 ioc->name, ioc->last_state);
3095 return -44;
3096 }
3097
3098 facts = &ioc->facts;
3099
3100 /* Destination (reply area)... */
3101 reply_sz = sizeof(*facts);
3102 memset(facts, 0, reply_sz);
3103
3104 /* Request area (get_facts on the stack right now!) */
3105 req_sz = sizeof(get_facts);
3106 memset(&get_facts, 0, req_sz);
3107
3108 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3109 /* Assert: All other get_facts fields are zero! */
3110
3111 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3112 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3113 ioc->name, req_sz, reply_sz));
3114
3115 /* No non-zero fields in the get_facts request are greater than
3116 * 1 byte in size, so we can just fire it off as is.
3117 */
3118 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3119 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3120 if (r != 0)
3121 return r;
3122
3123 /*
3124 * Now byte swap (GRRR) the necessary fields before any further
3125 * inspection of reply contents.
3126 *
3127 * But need to do some sanity checks on MsgLength (byte) field
3128 * to make sure we don't zero IOC's req_sz!
3129 */
3130 /* Did we get a valid reply? */
3131 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3132 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3133 /*
3134 * If not been here, done that, save off first WhoInit value
3135 */
3136 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3137 ioc->FirstWhoInit = facts->WhoInit;
3138 }
3139
3140 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3141 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3142 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3143 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3144 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3145 /* CHECKME! IOCStatus, IOCLogInfo */
3146
3147 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3148 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3149
3150 /*
3151 * FC f/w version changed between 1.1 and 1.2
3152 * Old: u16{Major(4),Minor(4),SubMinor(8)}
3153 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3154 */
3155 if (facts->MsgVersion < MPI_VERSION_01_02) {
3156 /*
3157 * Handle old FC f/w style, convert to new...
3158 */
3159 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3160 facts->FWVersion.Word =
3161 ((oldv<<12) & 0xFF000000) |
3162 ((oldv<<8) & 0x000FFF00);
3163 } else
3164 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3165
3166 facts->ProductID = le16_to_cpu(facts->ProductID);
3167
3168 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3169 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3170 ioc->ir_firmware = 1;
3171
3172 facts->CurrentHostMfaHighAddr =
3173 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3174 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3175 facts->CurrentSenseBufferHighAddr =
3176 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3177 facts->CurReplyFrameSize =
3178 le16_to_cpu(facts->CurReplyFrameSize);
3179 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3180
3181 /*
3182 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3183 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3184 * to 14 in MPI-1.01.0x.
3185 */
3186 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3187 facts->MsgVersion > MPI_VERSION_01_00) {
3188 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3189 }
3190
3191 facts->FWImageSize = ALIGN(facts->FWImageSize, 4);
3192
3193 if (!facts->RequestFrameSize) {
3194 /* Something is wrong! */
3195 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3196 ioc->name);
3197 return -55;
3198 }
3199
3200 r = sz = facts->BlockSize;
3201 vv = ((63 / (sz * 4)) + 1) & 0x03;
3202 ioc->NB_for_64_byte_frame = vv;
3203 while ( sz )
3204 {
3205 shiftFactor++;
3206 sz = sz >> 1;
3207 }
3208 ioc->NBShiftFactor = shiftFactor;
3209 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3210 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3211 ioc->name, vv, shiftFactor, r));
3212
3213 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3214 /*
3215 * Set values for this IOC's request & reply frame sizes,
3216 * and request & reply queue depths...
3217 */
3218 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3219 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3220 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3221 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3222
3223 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3224 ioc->name, ioc->reply_sz, ioc->reply_depth));
3225 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
3226 ioc->name, ioc->req_sz, ioc->req_depth));
3227
3228 /* Get port facts! */
3229 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3230 return r;
3231 }
3232 } else {
3233 printk(MYIOC_s_ERR_FMT
3234 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3235 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3236 RequestFrameSize)/sizeof(u32)));
3237 return -66;
3238 }
3239
3240 return 0;
3241}
3242
3243/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3244/**
3245 * GetPortFacts - Send PortFacts request to MPT adapter.
3246 * @ioc: Pointer to MPT_ADAPTER structure
3247 * @portnum: Port number
3248 * @sleepFlag: Specifies whether the process can sleep
3249 *
3250 * Returns 0 for success, non-zero for failure.
3251 */
3252static int
3253GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3254{
3255 PortFacts_t get_pfacts;
3256 PortFactsReply_t *pfacts;
3257 int ii;
3258 int req_sz;
3259 int reply_sz;
3260 int max_id;
3261
3262 /* IOC *must* NOT be in RESET state! */
3263 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3264 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3265 ioc->name, ioc->last_state );
3266 return -4;
3267 }
3268
3269 pfacts = &ioc->pfacts[portnum];
3270
3271 /* Destination (reply area)... */
3272 reply_sz = sizeof(*pfacts);
3273 memset(pfacts, 0, reply_sz);
3274
3275 /* Request area (get_pfacts on the stack right now!) */
3276 req_sz = sizeof(get_pfacts);
3277 memset(&get_pfacts, 0, req_sz);
3278
3279 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3280 get_pfacts.PortNumber = portnum;
3281 /* Assert: All other get_pfacts fields are zero! */
3282
3283 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3284 ioc->name, portnum));
3285
3286 /* No non-zero fields in the get_pfacts request are greater than
3287 * 1 byte in size, so we can just fire it off as is.
3288 */
3289 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3290 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3291 if (ii != 0)
3292 return ii;
3293
3294 /* Did we get a valid reply? */
3295
3296 /* Now byte swap the necessary fields in the response. */
3297 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3298 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3299 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3300 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3301 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3302 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3303 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3304 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3305 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3306
3307 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3308 pfacts->MaxDevices;
3309 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3310 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3311
3312 /*
3313 * Place all the devices on channels
3314 *
3315 * (for debuging)
3316 */
3317 if (mpt_channel_mapping) {
3318 ioc->devices_per_bus = 1;
3319 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3320 }
3321
3322 return 0;
3323}
3324
3325/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3326/**
3327 * SendIocInit - Send IOCInit request to MPT adapter.
3328 * @ioc: Pointer to MPT_ADAPTER structure
3329 * @sleepFlag: Specifies whether the process can sleep
3330 *
3331 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3332 *
3333 * Returns 0 for success, non-zero for failure.
3334 */
3335static int
3336SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3337{
3338 IOCInit_t ioc_init;
3339 MPIDefaultReply_t init_reply;
3340 u32 state;
3341 int r;
3342 int count;
3343 int cntdn;
3344
3345 memset(&ioc_init, 0, sizeof(ioc_init));
3346 memset(&init_reply, 0, sizeof(init_reply));
3347
3348 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3349 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3350
3351 /* If we are in a recovery mode and we uploaded the FW image,
3352 * then this pointer is not NULL. Skip the upload a second time.
3353 * Set this flag if cached_fw set for either IOC.
3354 */
3355 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3356 ioc->upload_fw = 1;
3357 else
3358 ioc->upload_fw = 0;
3359 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3360 ioc->name, ioc->upload_fw, ioc->facts.Flags));
3361
3362 ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3363 ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3364
3365 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3366 ioc->name, ioc->facts.MsgVersion));
3367 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3368 // set MsgVersion and HeaderVersion host driver was built with
3369 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3370 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3371
3372 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3373 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3374 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3375 return -99;
3376 }
3377 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
3378
3379 if (ioc->sg_addr_size == sizeof(u64)) {
3380 /* Save the upper 32-bits of the request
3381 * (reply) and sense buffers.
3382 */
3383 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3384 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3385 } else {
3386 /* Force 32-bit addressing */
3387 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3388 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3389 }
3390
3391 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3392 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3393 ioc->facts.MaxDevices = ioc_init.MaxDevices;
3394 ioc->facts.MaxBuses = ioc_init.MaxBuses;
3395
3396 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3397 ioc->name, &ioc_init));
3398
3399 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3400 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3401 if (r != 0) {
3402 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3403 return r;
3404 }
3405
3406 /* No need to byte swap the multibyte fields in the reply
3407 * since we don't even look at its contents.
3408 */
3409
3410 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3411 ioc->name, &ioc_init));
3412
3413 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3414 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3415 return r;
3416 }
3417
3418 /* YIKES! SUPER IMPORTANT!!!
3419 * Poll IocState until _OPERATIONAL while IOC is doing
3420 * LoopInit and TargetDiscovery!
3421 */
3422 count = 0;
3423 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
3424 state = mpt_GetIocState(ioc, 1);
3425 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3426 if (sleepFlag == CAN_SLEEP) {
3427 msleep(1);
3428 } else {
3429 mdelay(1);
3430 }
3431
3432 if (!cntdn) {
3433 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3434 ioc->name, (int)((count+5)/HZ));
3435 return -9;
3436 }
3437
3438 state = mpt_GetIocState(ioc, 1);
3439 count++;
3440 }
3441 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3442 ioc->name, count));
3443
3444 ioc->aen_event_read_flag=0;
3445 return r;
3446}
3447
3448/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3449/**
3450 * SendPortEnable - Send PortEnable request to MPT adapter port.
3451 * @ioc: Pointer to MPT_ADAPTER structure
3452 * @portnum: Port number to enable
3453 * @sleepFlag: Specifies whether the process can sleep
3454 *
3455 * Send PortEnable to bring IOC to OPERATIONAL state.
3456 *
3457 * Returns 0 for success, non-zero for failure.
3458 */
3459static int
3460SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3461{
3462 PortEnable_t port_enable;
3463 MPIDefaultReply_t reply_buf;
3464 int rc;
3465 int req_sz;
3466 int reply_sz;
3467
3468 /* Destination... */
3469 reply_sz = sizeof(MPIDefaultReply_t);
3470 memset(&reply_buf, 0, reply_sz);
3471
3472 req_sz = sizeof(PortEnable_t);
3473 memset(&port_enable, 0, req_sz);
3474
3475 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3476 port_enable.PortNumber = portnum;
3477/* port_enable.ChainOffset = 0; */
3478/* port_enable.MsgFlags = 0; */
3479/* port_enable.MsgContext = 0; */
3480
3481 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3482 ioc->name, portnum, &port_enable));
3483
3484 /* RAID FW may take a long time to enable
3485 */
3486 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3487 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3488 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3489 300 /*seconds*/, sleepFlag);
3490 } else {
3491 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3492 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3493 30 /*seconds*/, sleepFlag);
3494 }
3495 return rc;
3496}
3497
3498/**
3499 * mpt_alloc_fw_memory - allocate firmware memory
3500 * @ioc: Pointer to MPT_ADAPTER structure
3501 * @size: total FW bytes
3502 *
3503 * If memory has already been allocated, the same (cached) value
3504 * is returned.
3505 *
3506 * Return 0 if successful, or non-zero for failure
3507 **/
3508int
3509mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3510{
3511 int rc;
3512
3513 if (ioc->cached_fw) {
3514 rc = 0; /* use already allocated memory */
3515 goto out;
3516 }
3517 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3518 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
3519 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3520 rc = 0;
3521 goto out;
3522 }
3523 ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
3524 if (!ioc->cached_fw) {
3525 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3526 ioc->name);
3527 rc = -1;
3528 } else {
3529 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
3530 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3531 ioc->alloc_total += size;
3532 rc = 0;
3533 }
3534 out:
3535 return rc;
3536}
3537
3538/**
3539 * mpt_free_fw_memory - free firmware memory
3540 * @ioc: Pointer to MPT_ADAPTER structure
3541 *
3542 * If alt_img is NULL, delete from ioc structure.
3543 * Else, delete a secondary image in same format.
3544 **/
3545void
3546mpt_free_fw_memory(MPT_ADAPTER *ioc)
3547{
3548 int sz;
3549
3550 if (!ioc->cached_fw)
3551 return;
3552
3553 sz = ioc->facts.FWImageSize;
3554 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
3555 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3556 pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
3557 ioc->alloc_total -= sz;
3558 ioc->cached_fw = NULL;
3559}
3560
3561/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3562/**
3563 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3564 * @ioc: Pointer to MPT_ADAPTER structure
3565 * @sleepFlag: Specifies whether the process can sleep
3566 *
3567 * Returns 0 for success, >0 for handshake failure
3568 * <0 for fw upload failure.
3569 *
3570 * Remark: If bound IOC and a successful FWUpload was performed
3571 * on the bound IOC, the second image is discarded
3572 * and memory is free'd. Both channels must upload to prevent
3573 * IOC from running in degraded mode.
3574 */
3575static int
3576mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3577{
3578 u8 reply[sizeof(FWUploadReply_t)];
3579 FWUpload_t *prequest;
3580 FWUploadReply_t *preply;
3581 FWUploadTCSGE_t *ptcsge;
3582 u32 flagsLength;
3583 int ii, sz, reply_sz;
3584 int cmdStatus;
3585 int request_size;
3586 /* If the image size is 0, we are done.
3587 */
3588 if ((sz = ioc->facts.FWImageSize) == 0)
3589 return 0;
3590
3591 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3592 return -ENOMEM;
3593
3594 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
3595 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3596
3597 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3598 kzalloc(ioc->req_sz, GFP_KERNEL);
3599 if (!prequest) {
3600 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3601 "while allocating memory \n", ioc->name));
3602 mpt_free_fw_memory(ioc);
3603 return -ENOMEM;
3604 }
3605
3606 preply = (FWUploadReply_t *)&reply;
3607
3608 reply_sz = sizeof(reply);
3609 memset(preply, 0, reply_sz);
3610
3611 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3612 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3613
3614 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3615 ptcsge->DetailsLength = 12;
3616 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3617 ptcsge->ImageSize = cpu_to_le32(sz);
3618 ptcsge++;
3619
3620 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3621 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3622 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3623 ioc->SGE_size;
3624 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3625 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3626 ioc->facts.FWImageSize, request_size));
3627 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3628
3629 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3630 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3631
3632 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3633 "rc=%x \n", ioc->name, ii));
3634
3635 cmdStatus = -EFAULT;
3636 if (ii == 0) {
3637 /* Handshake transfer was complete and successful.
3638 * Check the Reply Frame.
3639 */
3640 int status;
3641 status = le16_to_cpu(preply->IOCStatus) &
3642 MPI_IOCSTATUS_MASK;
3643 if (status == MPI_IOCSTATUS_SUCCESS &&
3644 ioc->facts.FWImageSize ==
3645 le32_to_cpu(preply->ActualImageSize))
3646 cmdStatus = 0;
3647 }
3648 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3649 ioc->name, cmdStatus));
3650
3651
3652 if (cmdStatus) {
3653 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3654 "freeing image \n", ioc->name));
3655 mpt_free_fw_memory(ioc);
3656 }
3657 kfree(prequest);
3658
3659 return cmdStatus;
3660}
3661
3662/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3663/**
3664 * mpt_downloadboot - DownloadBoot code
3665 * @ioc: Pointer to MPT_ADAPTER structure
3666 * @pFwHeader: Pointer to firmware header info
3667 * @sleepFlag: Specifies whether the process can sleep
3668 *
3669 * FwDownloadBoot requires Programmed IO access.
3670 *
3671 * Returns 0 for success
3672 * -1 FW Image size is 0
3673 * -2 No valid cached_fw Pointer
3674 * <0 for fw upload failure.
3675 */
3676static int
3677mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3678{
3679 MpiExtImageHeader_t *pExtImage;
3680 u32 fwSize;
3681 u32 diag0val;
3682 int count;
3683 u32 *ptrFw;
3684 u32 diagRwData;
3685 u32 nextImage;
3686 u32 load_addr;
3687 u32 ioc_state=0;
3688
3689 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3690 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3691
3692 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3693 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3694 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3695 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3696 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3697 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3698
3699 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3700
3701 /* wait 1 msec */
3702 if (sleepFlag == CAN_SLEEP) {
3703 msleep(1);
3704 } else {
3705 mdelay (1);
3706 }
3707
3708 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3709 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3710
3711 for (count = 0; count < 30; count ++) {
3712 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3713 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3714 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3715 ioc->name, count));
3716 break;
3717 }
3718 /* wait .1 sec */
3719 if (sleepFlag == CAN_SLEEP) {
3720 msleep (100);
3721 } else {
3722 mdelay (100);
3723 }
3724 }
3725
3726 if ( count == 30 ) {
3727 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3728 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3729 ioc->name, diag0val));
3730 return -3;
3731 }
3732
3733 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3734 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3735 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3736 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3737 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3738 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3739
3740 /* Set the DiagRwEn and Disable ARM bits */
3741 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3742
3743 fwSize = (pFwHeader->ImageSize + 3)/4;
3744 ptrFw = (u32 *) pFwHeader;
3745
3746 /* Write the LoadStartAddress to the DiagRw Address Register
3747 * using Programmed IO
3748 */
3749 if (ioc->errata_flag_1064)
3750 pci_enable_io_access(ioc->pcidev);
3751
3752 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3753 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3754 ioc->name, pFwHeader->LoadStartAddress));
3755
3756 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3757 ioc->name, fwSize*4, ptrFw));
3758 while (fwSize--) {
3759 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3760 }
3761
3762 nextImage = pFwHeader->NextImageHeaderOffset;
3763 while (nextImage) {
3764 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3765
3766 load_addr = pExtImage->LoadStartAddress;
3767
3768 fwSize = (pExtImage->ImageSize + 3) >> 2;
3769 ptrFw = (u32 *)pExtImage;
3770
3771 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3772 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3773 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3774
3775 while (fwSize--) {
3776 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3777 }
3778 nextImage = pExtImage->NextImageHeaderOffset;
3779 }
3780
3781 /* Write the IopResetVectorRegAddr */
3782 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
3783 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3784
3785 /* Write the IopResetVectorValue */
3786 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3787 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3788
3789 /* Clear the internal flash bad bit - autoincrementing register,
3790 * so must do two writes.
3791 */
3792 if (ioc->bus_type == SPI) {
3793 /*
3794 * 1030 and 1035 H/W errata, workaround to access
3795 * the ClearFlashBadSignatureBit
3796 */
3797 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3798 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3799 diagRwData |= 0x40000000;
3800 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3801 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3802
3803 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3804 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3805 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3806 MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3807
3808 /* wait 1 msec */
3809 if (sleepFlag == CAN_SLEEP) {
3810 msleep (1);
3811 } else {
3812 mdelay (1);
3813 }
3814 }
3815
3816 if (ioc->errata_flag_1064)
3817 pci_disable_io_access(ioc->pcidev);
3818
3819 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3820 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3821 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3822 ioc->name, diag0val));
3823 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3824 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3825 ioc->name, diag0val));
3826 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3827
3828 /* Write 0xFF to reset the sequencer */
3829 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3830
3831 if (ioc->bus_type == SAS) {
3832 ioc_state = mpt_GetIocState(ioc, 0);
3833 if ( (GetIocFacts(ioc, sleepFlag,
3834 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3835 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3836 ioc->name, ioc_state));
3837 return -EFAULT;
3838 }
3839 }
3840
3841 for (count=0; count<HZ*20; count++) {
3842 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3843 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3844 "downloadboot successful! (count=%d) IocState=%x\n",
3845 ioc->name, count, ioc_state));
3846 if (ioc->bus_type == SAS) {
3847 return 0;
3848 }
3849 if ((SendIocInit(ioc, sleepFlag)) != 0) {
3850 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3851 "downloadboot: SendIocInit failed\n",
3852 ioc->name));
3853 return -EFAULT;
3854 }
3855 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3856 "downloadboot: SendIocInit successful\n",
3857 ioc->name));
3858 return 0;
3859 }
3860 if (sleepFlag == CAN_SLEEP) {
3861 msleep (10);
3862 } else {
3863 mdelay (10);
3864 }
3865 }
3866 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3867 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3868 return -EFAULT;
3869}
3870
3871/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3872/**
3873 * KickStart - Perform hard reset of MPT adapter.
3874 * @ioc: Pointer to MPT_ADAPTER structure
3875 * @force: Force hard reset
3876 * @sleepFlag: Specifies whether the process can sleep
3877 *
3878 * This routine places MPT adapter in diagnostic mode via the
3879 * WriteSequence register, and then performs a hard reset of adapter
3880 * via the Diagnostic register.
3881 *
3882 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
3883 * or NO_SLEEP (interrupt thread, use mdelay)
3884 * force - 1 if doorbell active, board fault state
3885 * board operational, IOC_RECOVERY or
3886 * IOC_BRINGUP and there is an alt_ioc.
3887 * 0 else
3888 *
3889 * Returns:
3890 * 1 - hard reset, READY
3891 * 0 - no reset due to History bit, READY
3892 * -1 - no reset due to History bit but not READY
3893 * OR reset but failed to come READY
3894 * -2 - no reset, could not enter DIAG mode
3895 * -3 - reset but bad FW bit
3896 */
3897static int
3898KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3899{
3900 int hard_reset_done = 0;
3901 u32 ioc_state=0;
3902 int cnt,cntdn;
3903
3904 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3905 if (ioc->bus_type == SPI) {
3906 /* Always issue a Msg Unit Reset first. This will clear some
3907 * SCSI bus hang conditions.
3908 */
3909 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3910
3911 if (sleepFlag == CAN_SLEEP) {
3912 msleep (1000);
3913 } else {
3914 mdelay (1000);
3915 }
3916 }
3917
3918 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3919 if (hard_reset_done < 0)
3920 return hard_reset_done;
3921
3922 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3923 ioc->name));
3924
3925 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
3926 for (cnt=0; cnt<cntdn; cnt++) {
3927 ioc_state = mpt_GetIocState(ioc, 1);
3928 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3929 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3930 ioc->name, cnt));
3931 return hard_reset_done;
3932 }
3933 if (sleepFlag == CAN_SLEEP) {
3934 msleep (10);
3935 } else {
3936 mdelay (10);
3937 }
3938 }
3939
3940 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3941 ioc->name, mpt_GetIocState(ioc, 0)));
3942 return -1;
3943}
3944
3945/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3946/**
3947 * mpt_diag_reset - Perform hard reset of the adapter.
3948 * @ioc: Pointer to MPT_ADAPTER structure
3949 * @ignore: Set if to honor and clear to ignore
3950 * the reset history bit
3951 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3952 * else set to NO_SLEEP (use mdelay instead)
3953 *
3954 * This routine places the adapter in diagnostic mode via the
3955 * WriteSequence register and then performs a hard reset of adapter
3956 * via the Diagnostic register. Adapter should be in ready state
3957 * upon successful completion.
3958 *
3959 * Returns: 1 hard reset successful
3960 * 0 no reset performed because reset history bit set
3961 * -2 enabling diagnostic mode failed
3962 * -3 diagnostic reset failed
3963 */
3964static int
3965mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3966{
3967 u32 diag0val;
3968 u32 doorbell;
3969 int hard_reset_done = 0;
3970 int count = 0;
3971 u32 diag1val = 0;
3972 MpiFwHeader_t *cached_fw; /* Pointer to FW */
3973 u8 cb_idx;
3974
3975 /* Clear any existing interrupts */
3976 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3977
3978 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3979
3980 if (!ignore)
3981 return 0;
3982
3983 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3984 "address=%p\n", ioc->name, __func__,
3985 &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3986 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3987 if (sleepFlag == CAN_SLEEP)
3988 msleep(1);
3989 else
3990 mdelay(1);
3991
3992 /*
3993 * Call each currently registered protocol IOC reset handler
3994 * with pre-reset indication.
3995 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3996 * MptResetHandlers[] registered yet.
3997 */
3998 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
3999 if (MptResetHandlers[cb_idx])
4000 (*(MptResetHandlers[cb_idx]))(ioc,
4001 MPT_IOC_PRE_RESET);
4002 }
4003
4004 for (count = 0; count < 60; count ++) {
4005 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4006 doorbell &= MPI_IOC_STATE_MASK;
4007
4008 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4009 "looking for READY STATE: doorbell=%x"
4010 " count=%d\n",
4011 ioc->name, doorbell, count));
4012
4013 if (doorbell == MPI_IOC_STATE_READY) {
4014 return 1;
4015 }
4016
4017 /* wait 1 sec */
4018 if (sleepFlag == CAN_SLEEP)
4019 msleep(1000);
4020 else
4021 mdelay(1000);
4022 }
4023 return -1;
4024 }
4025
4026 /* Use "Diagnostic reset" method! (only thing available!) */
4027 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4028
4029 if (ioc->debug_level & MPT_DEBUG) {
4030 if (ioc->alt_ioc)
4031 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4032 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4033 ioc->name, diag0val, diag1val));
4034 }
4035
4036 /* Do the reset if we are told to ignore the reset history
4037 * or if the reset history is 0
4038 */
4039 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4040 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4041 /* Write magic sequence to WriteSequence register
4042 * Loop until in diagnostic mode
4043 */
4044 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4045 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4046 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4047 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4048 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4049 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4050
4051 /* wait 100 msec */
4052 if (sleepFlag == CAN_SLEEP) {
4053 msleep (100);
4054 } else {
4055 mdelay (100);
4056 }
4057
4058 count++;
4059 if (count > 20) {
4060 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4061 ioc->name, diag0val);
4062 return -2;
4063
4064 }
4065
4066 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4067
4068 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4069 ioc->name, diag0val));
4070 }
4071
4072 if (ioc->debug_level & MPT_DEBUG) {
4073 if (ioc->alt_ioc)
4074 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4075 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4076 ioc->name, diag0val, diag1val));
4077 }
4078 /*
4079 * Disable the ARM (Bug fix)
4080 *
4081 */
4082 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4083 mdelay(1);
4084
4085 /*
4086 * Now hit the reset bit in the Diagnostic register
4087 * (THE BIG HAMMER!) (Clears DRWE bit).
4088 */
4089 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4090 hard_reset_done = 1;
4091 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4092 ioc->name));
4093
4094 /*
4095 * Call each currently registered protocol IOC reset handler
4096 * with pre-reset indication.
4097 * NOTE: If we're doing _IOC_BRINGUP, there can be no
4098 * MptResetHandlers[] registered yet.
4099 */
4100 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4101 if (MptResetHandlers[cb_idx]) {
4102 mpt_signal_reset(cb_idx,
4103 ioc, MPT_IOC_PRE_RESET);
4104 if (ioc->alt_ioc) {
4105 mpt_signal_reset(cb_idx,
4106 ioc->alt_ioc, MPT_IOC_PRE_RESET);
4107 }
4108 }
4109 }
4110
4111 if (ioc->cached_fw)
4112 cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4113 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4114 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4115 else
4116 cached_fw = NULL;
4117 if (cached_fw) {
4118 /* If the DownloadBoot operation fails, the
4119 * IOC will be left unusable. This is a fatal error
4120 * case. _diag_reset will return < 0
4121 */
4122 for (count = 0; count < 30; count ++) {
4123 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4124 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4125 break;
4126 }
4127
4128 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4129 ioc->name, diag0val, count));
4130 /* wait 1 sec */
4131 if (sleepFlag == CAN_SLEEP) {
4132 msleep (1000);
4133 } else {
4134 mdelay (1000);
4135 }
4136 }
4137 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4138 printk(MYIOC_s_WARN_FMT
4139 "firmware downloadboot failure (%d)!\n", ioc->name, count);
4140 }
4141
4142 } else {
4143 /* Wait for FW to reload and for board
4144 * to go to the READY state.
4145 * Maximum wait is 60 seconds.
4146 * If fail, no error will check again
4147 * with calling program.
4148 */
4149 for (count = 0; count < 60; count ++) {
4150 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4151 doorbell &= MPI_IOC_STATE_MASK;
4152
4153 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4154 "looking for READY STATE: doorbell=%x"
4155 " count=%d\n", ioc->name, doorbell, count));
4156
4157 if (doorbell == MPI_IOC_STATE_READY) {
4158 break;
4159 }
4160
4161 /* wait 1 sec */
4162 if (sleepFlag == CAN_SLEEP) {
4163 msleep (1000);
4164 } else {
4165 mdelay (1000);
4166 }
4167 }
4168
4169 if (doorbell != MPI_IOC_STATE_READY)
4170 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4171 "after reset! IocState=%x", ioc->name,
4172 doorbell);
4173 }
4174 }
4175
4176 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4177 if (ioc->debug_level & MPT_DEBUG) {
4178 if (ioc->alt_ioc)
4179 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4180 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4181 ioc->name, diag0val, diag1val));
4182 }
4183
4184 /* Clear RESET_HISTORY bit! Place board in the
4185 * diagnostic mode to update the diag register.
4186 */
4187 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4188 count = 0;
4189 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4190 /* Write magic sequence to WriteSequence register
4191 * Loop until in diagnostic mode
4192 */
4193 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4194 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4195 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4196 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4197 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4198 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4199
4200 /* wait 100 msec */
4201 if (sleepFlag == CAN_SLEEP) {
4202 msleep (100);
4203 } else {
4204 mdelay (100);
4205 }
4206
4207 count++;
4208 if (count > 20) {
4209 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4210 ioc->name, diag0val);
4211 break;
4212 }
4213 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4214 }
4215 diag0val &= ~MPI_DIAG_RESET_HISTORY;
4216 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4217 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4218 if (diag0val & MPI_DIAG_RESET_HISTORY) {
4219 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4220 ioc->name);
4221 }
4222
4223 /* Disable Diagnostic Mode
4224 */
4225 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4226
4227 /* Check FW reload status flags.
4228 */
4229 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4230 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4231 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4232 ioc->name, diag0val);
4233 return -3;
4234 }
4235
4236 if (ioc->debug_level & MPT_DEBUG) {
4237 if (ioc->alt_ioc)
4238 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4239 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4240 ioc->name, diag0val, diag1val));
4241 }
4242
4243 /*
4244 * Reset flag that says we've enabled event notification
4245 */
4246 ioc->facts.EventState = 0;
4247
4248 if (ioc->alt_ioc)
4249 ioc->alt_ioc->facts.EventState = 0;
4250
4251 return hard_reset_done;
4252}
4253
4254/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4255/**
4256 * SendIocReset - Send IOCReset request to MPT adapter.
4257 * @ioc: Pointer to MPT_ADAPTER structure
4258 * @reset_type: reset type, expected values are
4259 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4260 * @sleepFlag: Specifies whether the process can sleep
4261 *
4262 * Send IOCReset request to the MPT adapter.
4263 *
4264 * Returns 0 for success, non-zero for failure.
4265 */
4266static int
4267SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4268{
4269 int r;
4270 u32 state;
4271 int cntdn, count;
4272
4273 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4274 ioc->name, reset_type));
4275 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4276 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4277 return r;
4278
4279 /* FW ACK'd request, wait for READY state
4280 */
4281 count = 0;
4282 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
4283
4284 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4285 cntdn--;
4286 count++;
4287 if (!cntdn) {
4288 if (sleepFlag != CAN_SLEEP)
4289 count *= 10;
4290
4291 printk(MYIOC_s_ERR_FMT
4292 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4293 ioc->name, state, (int)((count+5)/HZ));
4294 return -ETIME;
4295 }
4296
4297 if (sleepFlag == CAN_SLEEP) {
4298 msleep(1);
4299 } else {
4300 mdelay (1); /* 1 msec delay */
4301 }
4302 }
4303
4304 /* TODO!
4305 * Cleanup all event stuff for this IOC; re-issue EventNotification
4306 * request if needed.
4307 */
4308 if (ioc->facts.Function)
4309 ioc->facts.EventState = 0;
4310
4311 return 0;
4312}
4313
4314/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4315/**
4316 * initChainBuffers - Allocate memory for and initialize chain buffers
4317 * @ioc: Pointer to MPT_ADAPTER structure
4318 *
4319 * Allocates memory for and initializes chain buffers,
4320 * chain buffer control arrays and spinlock.
4321 */
4322static int
4323initChainBuffers(MPT_ADAPTER *ioc)
4324{
4325 u8 *mem;
4326 int sz, ii, num_chain;
4327 int scale, num_sge, numSGE;
4328
4329 /* ReqToChain size must equal the req_depth
4330 * index = req_idx
4331 */
4332 if (ioc->ReqToChain == NULL) {
4333 sz = ioc->req_depth * sizeof(int);
4334 mem = kmalloc(sz, GFP_ATOMIC);
4335 if (mem == NULL)
4336 return -1;
4337
4338 ioc->ReqToChain = (int *) mem;
4339 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
4340 ioc->name, mem, sz));
4341 mem = kmalloc(sz, GFP_ATOMIC);
4342 if (mem == NULL)
4343 return -1;
4344
4345 ioc->RequestNB = (int *) mem;
4346 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
4347 ioc->name, mem, sz));
4348 }
4349 for (ii = 0; ii < ioc->req_depth; ii++) {
4350 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4351 }
4352
4353 /* ChainToChain size must equal the total number
4354 * of chain buffers to be allocated.
4355 * index = chain_idx
4356 *
4357 * Calculate the number of chain buffers needed(plus 1) per I/O
4358 * then multiply the maximum number of simultaneous cmds
4359 *
4360 * num_sge = num sge in request frame + last chain buffer
4361 * scale = num sge per chain buffer if no chain element
4362 */
4363 scale = ioc->req_sz / ioc->SGE_size;
4364 if (ioc->sg_addr_size == sizeof(u64))
4365 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
4366 else
4367 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4368
4369 if (ioc->sg_addr_size == sizeof(u64)) {
4370 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4371 (ioc->req_sz - 60) / ioc->SGE_size;
4372 } else {
4373 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4374 scale + (ioc->req_sz - 64) / ioc->SGE_size;
4375 }
4376 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4377 ioc->name, num_sge, numSGE));
4378
4379 if (ioc->bus_type == FC) {
4380 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4381 numSGE = MPT_SCSI_FC_SG_DEPTH;
4382 } else {
4383 if (numSGE > MPT_SCSI_SG_DEPTH)
4384 numSGE = MPT_SCSI_SG_DEPTH;
4385 }
4386
4387 num_chain = 1;
4388 while (numSGE - num_sge > 0) {
4389 num_chain++;
4390 num_sge += (scale - 1);
4391 }
4392 num_chain++;
4393
4394 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4395 ioc->name, numSGE, num_sge, num_chain));
4396
4397 if (ioc->bus_type == SPI)
4398 num_chain *= MPT_SCSI_CAN_QUEUE;
4399 else if (ioc->bus_type == SAS)
4400 num_chain *= MPT_SAS_CAN_QUEUE;
4401 else
4402 num_chain *= MPT_FC_CAN_QUEUE;
4403
4404 ioc->num_chain = num_chain;
4405
4406 sz = num_chain * sizeof(int);
4407 if (ioc->ChainToChain == NULL) {
4408 mem = kmalloc(sz, GFP_ATOMIC);
4409 if (mem == NULL)
4410 return -1;
4411
4412 ioc->ChainToChain = (int *) mem;
4413 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4414 ioc->name, mem, sz));
4415 } else {
4416 mem = (u8 *) ioc->ChainToChain;
4417 }
4418 memset(mem, 0xFF, sz);
4419 return num_chain;
4420}
4421
4422/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4423/**
4424 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
4425 * @ioc: Pointer to MPT_ADAPTER structure
4426 *
4427 * This routine allocates memory for the MPT reply and request frame
4428 * pools (if necessary), and primes the IOC reply FIFO with
4429 * reply frames.
4430 *
4431 * Returns 0 for success, non-zero for failure.
4432 */
4433static int
4434PrimeIocFifos(MPT_ADAPTER *ioc)
4435{
4436 MPT_FRAME_HDR *mf;
4437 unsigned long flags;
4438 dma_addr_t alloc_dma;
4439 u8 *mem;
4440 int i, reply_sz, sz, total_size, num_chain;
4441 u64 dma_mask;
4442
4443 dma_mask = 0;
4444
4445 /* Prime reply FIFO... */
4446
4447 if (ioc->reply_frames == NULL) {
4448 if ( (num_chain = initChainBuffers(ioc)) < 0)
4449 return -1;
4450 /*
4451 * 1078 errata workaround for the 36GB limitation
4452 */
4453 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4454 ioc->dma_mask > DMA_BIT_MASK(35)) {
4455 if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
4456 && !pci_set_consistent_dma_mask(ioc->pcidev,
4457 DMA_BIT_MASK(32))) {
4458 dma_mask = DMA_BIT_MASK(35);
4459 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4460 "setting 35 bit addressing for "
4461 "Request/Reply/Chain and Sense Buffers\n",
4462 ioc->name));
4463 } else {
4464 /*Reseting DMA mask to 64 bit*/
4465 pci_set_dma_mask(ioc->pcidev,
4466 DMA_BIT_MASK(64));
4467 pci_set_consistent_dma_mask(ioc->pcidev,
4468 DMA_BIT_MASK(64));
4469
4470 printk(MYIOC_s_ERR_FMT
4471 "failed setting 35 bit addressing for "
4472 "Request/Reply/Chain and Sense Buffers\n",
4473 ioc->name);
4474 return -1;
4475 }
4476 }
4477
4478 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4479 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4480 ioc->name, ioc->reply_sz, ioc->reply_depth));
4481 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4482 ioc->name, reply_sz, reply_sz));
4483
4484 sz = (ioc->req_sz * ioc->req_depth);
4485 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4486 ioc->name, ioc->req_sz, ioc->req_depth));
4487 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4488 ioc->name, sz, sz));
4489 total_size += sz;
4490
4491 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4492 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4493 ioc->name, ioc->req_sz, num_chain));
4494 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4495 ioc->name, sz, sz, num_chain));
4496
4497 total_size += sz;
4498 mem = dma_alloc_coherent(&ioc->pcidev->dev, total_size,
4499 &alloc_dma, GFP_KERNEL);
4500 if (mem == NULL) {
4501 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4502 ioc->name);
4503 goto out_fail;
4504 }
4505
4506 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4507 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4508
4509 memset(mem, 0, total_size);
4510 ioc->alloc_total += total_size;
4511 ioc->alloc = mem;
4512 ioc->alloc_dma = alloc_dma;
4513 ioc->alloc_sz = total_size;
4514 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4515 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4516
4517 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4518 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4519
4520 alloc_dma += reply_sz;
4521 mem += reply_sz;
4522
4523 /* Request FIFO - WE manage this! */
4524
4525 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4526 ioc->req_frames_dma = alloc_dma;
4527
4528 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4529 ioc->name, mem, (void *)(ulong)alloc_dma));
4530
4531 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4532
4533 for (i = 0; i < ioc->req_depth; i++) {
4534 alloc_dma += ioc->req_sz;
4535 mem += ioc->req_sz;
4536 }
4537
4538 ioc->ChainBuffer = mem;
4539 ioc->ChainBufferDMA = alloc_dma;
4540
4541 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4542 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4543
4544 /* Initialize the free chain Q.
4545 */
4546
4547 INIT_LIST_HEAD(&ioc->FreeChainQ);
4548
4549 /* Post the chain buffers to the FreeChainQ.
4550 */
4551 mem = (u8 *)ioc->ChainBuffer;
4552 for (i=0; i < num_chain; i++) {
4553 mf = (MPT_FRAME_HDR *) mem;
4554 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4555 mem += ioc->req_sz;
4556 }
4557
4558 /* Initialize Request frames linked list
4559 */
4560 alloc_dma = ioc->req_frames_dma;
4561 mem = (u8 *) ioc->req_frames;
4562
4563 spin_lock_irqsave(&ioc->FreeQlock, flags);
4564 INIT_LIST_HEAD(&ioc->FreeQ);
4565 for (i = 0; i < ioc->req_depth; i++) {
4566 mf = (MPT_FRAME_HDR *) mem;
4567
4568 /* Queue REQUESTs *internally*! */
4569 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4570
4571 mem += ioc->req_sz;
4572 }
4573 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4574
4575 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4576 ioc->sense_buf_pool = dma_alloc_coherent(&ioc->pcidev->dev, sz,
4577 &ioc->sense_buf_pool_dma, GFP_KERNEL);
4578 if (ioc->sense_buf_pool == NULL) {
4579 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4580 ioc->name);
4581 goto out_fail;
4582 }
4583
4584 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4585 ioc->alloc_total += sz;
4586 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4587 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4588
4589 }
4590
4591 /* Post Reply frames to FIFO
4592 */
4593 alloc_dma = ioc->alloc_dma;
4594 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4595 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4596
4597 for (i = 0; i < ioc->reply_depth; i++) {
4598 /* Write each address to the IOC! */
4599 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4600 alloc_dma += ioc->reply_sz;
4601 }
4602
4603 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4604 ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
4605 ioc->dma_mask))
4606 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4607 "restoring 64 bit addressing\n", ioc->name));
4608
4609 return 0;
4610
4611out_fail:
4612
4613 if (ioc->alloc != NULL) {
4614 sz = ioc->alloc_sz;
4615 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc,
4616 ioc->alloc_dma);
4617 ioc->reply_frames = NULL;
4618 ioc->req_frames = NULL;
4619 ioc->alloc_total -= sz;
4620 }
4621 if (ioc->sense_buf_pool != NULL) {
4622 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4623 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool,
4624 ioc->sense_buf_pool_dma);
4625 ioc->sense_buf_pool = NULL;
4626 }
4627
4628 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4629 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
4630 DMA_BIT_MASK(64)))
4631 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4632 "restoring 64 bit addressing\n", ioc->name));
4633
4634 return -1;
4635}
4636
4637/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4638/**
4639 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4640 * from IOC via doorbell handshake method.
4641 * @ioc: Pointer to MPT_ADAPTER structure
4642 * @reqBytes: Size of the request in bytes
4643 * @req: Pointer to MPT request frame
4644 * @replyBytes: Expected size of the reply in bytes
4645 * @u16reply: Pointer to area where reply should be written
4646 * @maxwait: Max wait time for a reply (in seconds)
4647 * @sleepFlag: Specifies whether the process can sleep
4648 *
4649 * NOTES: It is the callers responsibility to byte-swap fields in the
4650 * request which are greater than 1 byte in size. It is also the
4651 * callers responsibility to byte-swap response fields which are
4652 * greater than 1 byte in size.
4653 *
4654 * Returns 0 for success, non-zero for failure.
4655 */
4656static int
4657mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4658 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4659{
4660 MPIDefaultReply_t *mptReply;
4661 int failcnt = 0;
4662 int t;
4663
4664 /*
4665 * Get ready to cache a handshake reply
4666 */
4667 ioc->hs_reply_idx = 0;
4668 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4669 mptReply->MsgLength = 0;
4670
4671 /*
4672 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4673 * then tell IOC that we want to handshake a request of N words.
4674 * (WRITE u32val to Doorbell reg).
4675 */
4676 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4677 CHIPREG_WRITE32(&ioc->chip->Doorbell,
4678 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4679 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4680
4681 /*
4682 * Wait for IOC's doorbell handshake int
4683 */
4684 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4685 failcnt++;
4686
4687 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4688 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4689
4690 /* Read doorbell and check for active bit */
4691 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4692 return -1;
4693
4694 /*
4695 * Clear doorbell int (WRITE 0 to IntStatus reg),
4696 * then wait for IOC to ACKnowledge that it's ready for
4697 * our handshake request.
4698 */
4699 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4700 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4701 failcnt++;
4702
4703 if (!failcnt) {
4704 int ii;
4705 u8 *req_as_bytes = (u8 *) req;
4706
4707 /*
4708 * Stuff request words via doorbell handshake,
4709 * with ACK from IOC for each.
4710 */
4711 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4712 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
4713 (req_as_bytes[(ii*4) + 1] << 8) |
4714 (req_as_bytes[(ii*4) + 2] << 16) |
4715 (req_as_bytes[(ii*4) + 3] << 24));
4716
4717 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4718 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4719 failcnt++;
4720 }
4721
4722 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4723 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4724
4725 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4726 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4727
4728 /*
4729 * Wait for completion of doorbell handshake reply from the IOC
4730 */
4731 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4732 failcnt++;
4733
4734 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4735 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4736
4737 /*
4738 * Copy out the cached reply...
4739 */
4740 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4741 u16reply[ii] = ioc->hs_reply[ii];
4742 } else {
4743 return -99;
4744 }
4745
4746 return -failcnt;
4747}
4748
4749/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4750/**
4751 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4752 * @ioc: Pointer to MPT_ADAPTER structure
4753 * @howlong: How long to wait (in seconds)
4754 * @sleepFlag: Specifies whether the process can sleep
4755 *
4756 * This routine waits (up to ~2 seconds max) for IOC doorbell
4757 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4758 * bit in its IntStatus register being clear.
4759 *
4760 * Returns a negative value on failure, else wait loop count.
4761 */
4762static int
4763WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4764{
4765 int cntdn;
4766 int count = 0;
4767 u32 intstat=0;
4768
4769 cntdn = 1000 * howlong;
4770
4771 if (sleepFlag == CAN_SLEEP) {
4772 while (--cntdn) {
4773 msleep (1);
4774 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4775 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4776 break;
4777 count++;
4778 }
4779 } else {
4780 while (--cntdn) {
4781 udelay (1000);
4782 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4783 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4784 break;
4785 count++;
4786 }
4787 }
4788
4789 if (cntdn) {
4790 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4791 ioc->name, count));
4792 return count;
4793 }
4794
4795 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4796 ioc->name, count, intstat);
4797 return -1;
4798}
4799
4800/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4801/**
4802 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4803 * @ioc: Pointer to MPT_ADAPTER structure
4804 * @howlong: How long to wait (in seconds)
4805 * @sleepFlag: Specifies whether the process can sleep
4806 *
4807 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4808 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4809 *
4810 * Returns a negative value on failure, else wait loop count.
4811 */
4812static int
4813WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4814{
4815 int cntdn;
4816 int count = 0;
4817 u32 intstat=0;
4818
4819 cntdn = 1000 * howlong;
4820 if (sleepFlag == CAN_SLEEP) {
4821 while (--cntdn) {
4822 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4823 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4824 break;
4825 msleep(1);
4826 count++;
4827 }
4828 } else {
4829 while (--cntdn) {
4830 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4831 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4832 break;
4833 udelay (1000);
4834 count++;
4835 }
4836 }
4837
4838 if (cntdn) {
4839 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4840 ioc->name, count, howlong));
4841 return count;
4842 }
4843
4844 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4845 ioc->name, count, intstat);
4846 return -1;
4847}
4848
4849/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4850/**
4851 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4852 * @ioc: Pointer to MPT_ADAPTER structure
4853 * @howlong: How long to wait (in seconds)
4854 * @sleepFlag: Specifies whether the process can sleep
4855 *
4856 * This routine polls the IOC for a handshake reply, 16 bits at a time.
4857 * Reply is cached to IOC private area large enough to hold a maximum
4858 * of 128 bytes of reply data.
4859 *
4860 * Returns a negative value on failure, else size of reply in WORDS.
4861 */
4862static int
4863WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4864{
4865 int u16cnt = 0;
4866 int failcnt = 0;
4867 int t;
4868 u16 *hs_reply = ioc->hs_reply;
4869 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4870 u16 hword;
4871
4872 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4873
4874 /*
4875 * Get first two u16's so we can look at IOC's intended reply MsgLength
4876 */
4877 u16cnt=0;
4878 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4879 failcnt++;
4880 } else {
4881 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4882 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4883 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4884 failcnt++;
4885 else {
4886 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4887 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4888 }
4889 }
4890
4891 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4892 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4893 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4894
4895 /*
4896 * If no error (and IOC said MsgLength is > 0), piece together
4897 * reply 16 bits at a time.
4898 */
4899 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4900 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4901 failcnt++;
4902 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4903 /* don't overflow our IOC hs_reply[] buffer! */
4904 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4905 hs_reply[u16cnt] = hword;
4906 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4907 }
4908
4909 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4910 failcnt++;
4911 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4912
4913 if (failcnt) {
4914 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4915 ioc->name);
4916 return -failcnt;
4917 }
4918#if 0
4919 else if (u16cnt != (2 * mptReply->MsgLength)) {
4920 return -101;
4921 }
4922 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4923 return -102;
4924 }
4925#endif
4926
4927 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4928 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4929
4930 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4931 ioc->name, t, u16cnt/2));
4932 return u16cnt/2;
4933}
4934
4935/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4936/**
4937 * GetLanConfigPages - Fetch LANConfig pages.
4938 * @ioc: Pointer to MPT_ADAPTER structure
4939 *
4940 * Return: 0 for success
4941 * -ENOMEM if no memory available
4942 * -EPERM if not allowed due to ISR context
4943 * -EAGAIN if no msg frames currently available
4944 * -EFAULT for non-successful reply or no reply (timeout)
4945 */
4946static int
4947GetLanConfigPages(MPT_ADAPTER *ioc)
4948{
4949 ConfigPageHeader_t hdr;
4950 CONFIGPARMS cfg;
4951 LANPage0_t *ppage0_alloc;
4952 dma_addr_t page0_dma;
4953 LANPage1_t *ppage1_alloc;
4954 dma_addr_t page1_dma;
4955 int rc = 0;
4956 int data_sz;
4957 int copy_sz;
4958
4959 /* Get LAN Page 0 header */
4960 hdr.PageVersion = 0;
4961 hdr.PageLength = 0;
4962 hdr.PageNumber = 0;
4963 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4964 cfg.cfghdr.hdr = &hdr;
4965 cfg.physAddr = -1;
4966 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4967 cfg.dir = 0;
4968 cfg.pageAddr = 0;
4969 cfg.timeout = 0;
4970
4971 if ((rc = mpt_config(ioc, &cfg)) != 0)
4972 return rc;
4973
4974 if (hdr.PageLength > 0) {
4975 data_sz = hdr.PageLength * 4;
4976 ppage0_alloc = pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
4977 rc = -ENOMEM;
4978 if (ppage0_alloc) {
4979 memset((u8 *)ppage0_alloc, 0, data_sz);
4980 cfg.physAddr = page0_dma;
4981 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4982
4983 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4984 /* save the data */
4985 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4986 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4987
4988 }
4989
4990 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
4991
4992 /* FIXME!
4993 * Normalize endianness of structure data,
4994 * by byte-swapping all > 1 byte fields!
4995 */
4996
4997 }
4998
4999 if (rc)
5000 return rc;
5001 }
5002
5003 /* Get LAN Page 1 header */
5004 hdr.PageVersion = 0;
5005 hdr.PageLength = 0;
5006 hdr.PageNumber = 1;
5007 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
5008 cfg.cfghdr.hdr = &hdr;
5009 cfg.physAddr = -1;
5010 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5011 cfg.dir = 0;
5012 cfg.pageAddr = 0;
5013
5014 if ((rc = mpt_config(ioc, &cfg)) != 0)
5015 return rc;
5016
5017 if (hdr.PageLength == 0)
5018 return 0;
5019
5020 data_sz = hdr.PageLength * 4;
5021 rc = -ENOMEM;
5022 ppage1_alloc = pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
5023 if (ppage1_alloc) {
5024 memset((u8 *)ppage1_alloc, 0, data_sz);
5025 cfg.physAddr = page1_dma;
5026 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5027
5028 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5029 /* save the data */
5030 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5031 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5032 }
5033
5034 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
5035
5036 /* FIXME!
5037 * Normalize endianness of structure data,
5038 * by byte-swapping all > 1 byte fields!
5039 */
5040
5041 }
5042
5043 return rc;
5044}
5045
5046/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5047/**
5048 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5049 * @ioc: Pointer to MPT_ADAPTER structure
5050 * @persist_opcode: see below
5051 *
5052 * =============================== ======================================
5053 * MPI_SAS_OP_CLEAR_NOT_PRESENT Free all persist TargetID mappings for
5054 * devices not currently present.
5055 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT Clear al persist TargetID mappings
5056 * =============================== ======================================
5057 *
5058 * NOTE: Don't use not this function during interrupt time.
5059 *
5060 * Returns 0 for success, non-zero error
5061 */
5062
5063/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5064int
5065mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5066{
5067 SasIoUnitControlRequest_t *sasIoUnitCntrReq;
5068 SasIoUnitControlReply_t *sasIoUnitCntrReply;
5069 MPT_FRAME_HDR *mf = NULL;
5070 MPIHeader_t *mpi_hdr;
5071 int ret = 0;
5072 unsigned long timeleft;
5073
5074 mutex_lock(&ioc->mptbase_cmds.mutex);
5075
5076 /* init the internal cmd struct */
5077 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5078 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5079
5080 /* insure garbage is not sent to fw */
5081 switch(persist_opcode) {
5082
5083 case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5084 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5085 break;
5086
5087 default:
5088 ret = -1;
5089 goto out;
5090 }
5091
5092 printk(KERN_DEBUG "%s: persist_opcode=%x\n",
5093 __func__, persist_opcode);
5094
5095 /* Get a MF for this command.
5096 */
5097 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5098 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5099 ret = -1;
5100 goto out;
5101 }
5102
5103 mpi_hdr = (MPIHeader_t *) mf;
5104 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5105 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5106 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5107 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5108 sasIoUnitCntrReq->Operation = persist_opcode;
5109
5110 mpt_put_msg_frame(mpt_base_index, ioc, mf);
5111 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5112 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5113 ret = -ETIME;
5114 printk(KERN_DEBUG "%s: failed\n", __func__);
5115 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5116 goto out;
5117 if (!timeleft) {
5118 printk(MYIOC_s_WARN_FMT
5119 "Issuing Reset from %s!!, doorbell=0x%08x\n",
5120 ioc->name, __func__, mpt_GetIocState(ioc, 0));
5121 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5122 mpt_free_msg_frame(ioc, mf);
5123 }
5124 goto out;
5125 }
5126
5127 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5128 ret = -1;
5129 goto out;
5130 }
5131
5132 sasIoUnitCntrReply =
5133 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5134 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5135 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5136 __func__, sasIoUnitCntrReply->IOCStatus,
5137 sasIoUnitCntrReply->IOCLogInfo);
5138 printk(KERN_DEBUG "%s: failed\n", __func__);
5139 ret = -1;
5140 } else
5141 printk(KERN_DEBUG "%s: success\n", __func__);
5142 out:
5143
5144 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5145 mutex_unlock(&ioc->mptbase_cmds.mutex);
5146 return ret;
5147}
5148
5149/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5150
5151static void
5152mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5153 MpiEventDataRaid_t * pRaidEventData)
5154{
5155 int volume;
5156 int reason;
5157 int disk;
5158 int status;
5159 int flags;
5160 int state;
5161
5162 volume = pRaidEventData->VolumeID;
5163 reason = pRaidEventData->ReasonCode;
5164 disk = pRaidEventData->PhysDiskNum;
5165 status = le32_to_cpu(pRaidEventData->SettingsStatus);
5166 flags = (status >> 0) & 0xff;
5167 state = (status >> 8) & 0xff;
5168
5169 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5170 return;
5171 }
5172
5173 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5174 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5175 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5176 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5177 ioc->name, disk, volume);
5178 } else {
5179 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5180 ioc->name, volume);
5181 }
5182
5183 switch(reason) {
5184 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5185 printk(MYIOC_s_INFO_FMT " volume has been created\n",
5186 ioc->name);
5187 break;
5188
5189 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5190
5191 printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
5192 ioc->name);
5193 break;
5194
5195 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5196 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
5197 ioc->name);
5198 break;
5199
5200 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5201 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
5202 ioc->name,
5203 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5204 ? "optimal"
5205 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5206 ? "degraded"
5207 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5208 ? "failed"
5209 : "state unknown",
5210 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5211 ? ", enabled" : "",
5212 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5213 ? ", quiesced" : "",
5214 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5215 ? ", resync in progress" : "" );
5216 break;
5217
5218 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5219 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
5220 ioc->name, disk);
5221 break;
5222
5223 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5224 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
5225 ioc->name);
5226 break;
5227
5228 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5229 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
5230 ioc->name);
5231 break;
5232
5233 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5234 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
5235 ioc->name);
5236 break;
5237
5238 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5239 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
5240 ioc->name,
5241 state == MPI_PHYSDISK0_STATUS_ONLINE
5242 ? "online"
5243 : state == MPI_PHYSDISK0_STATUS_MISSING
5244 ? "missing"
5245 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5246 ? "not compatible"
5247 : state == MPI_PHYSDISK0_STATUS_FAILED
5248 ? "failed"
5249 : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5250 ? "initializing"
5251 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5252 ? "offline requested"
5253 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5254 ? "failed requested"
5255 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5256 ? "offline"
5257 : "state unknown",
5258 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5259 ? ", out of sync" : "",
5260 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5261 ? ", quiesced" : "" );
5262 break;
5263
5264 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5265 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
5266 ioc->name, disk);
5267 break;
5268
5269 case MPI_EVENT_RAID_RC_SMART_DATA:
5270 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5271 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5272 break;
5273
5274 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5275 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
5276 ioc->name, disk);
5277 break;
5278 }
5279}
5280
5281/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5282/**
5283 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5284 * @ioc: Pointer to MPT_ADAPTER structure
5285 *
5286 * Returns: 0 for success
5287 * -ENOMEM if no memory available
5288 * -EPERM if not allowed due to ISR context
5289 * -EAGAIN if no msg frames currently available
5290 * -EFAULT for non-successful reply or no reply (timeout)
5291 */
5292static int
5293GetIoUnitPage2(MPT_ADAPTER *ioc)
5294{
5295 ConfigPageHeader_t hdr;
5296 CONFIGPARMS cfg;
5297 IOUnitPage2_t *ppage_alloc;
5298 dma_addr_t page_dma;
5299 int data_sz;
5300 int rc;
5301
5302 /* Get the page header */
5303 hdr.PageVersion = 0;
5304 hdr.PageLength = 0;
5305 hdr.PageNumber = 2;
5306 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5307 cfg.cfghdr.hdr = &hdr;
5308 cfg.physAddr = -1;
5309 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5310 cfg.dir = 0;
5311 cfg.pageAddr = 0;
5312 cfg.timeout = 0;
5313
5314 if ((rc = mpt_config(ioc, &cfg)) != 0)
5315 return rc;
5316
5317 if (hdr.PageLength == 0)
5318 return 0;
5319
5320 /* Read the config page */
5321 data_sz = hdr.PageLength * 4;
5322 rc = -ENOMEM;
5323 ppage_alloc = pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
5324 if (ppage_alloc) {
5325 memset((u8 *)ppage_alloc, 0, data_sz);
5326 cfg.physAddr = page_dma;
5327 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5328
5329 /* If Good, save data */
5330 if ((rc = mpt_config(ioc, &cfg)) == 0)
5331 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5332
5333 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
5334 }
5335
5336 return rc;
5337}
5338
5339/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5340/**
5341 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5342 * @ioc: Pointer to a Adapter Strucutre
5343 * @portnum: IOC port number
5344 *
5345 * Return: -EFAULT if read of config page header fails
5346 * or if no nvram
5347 * If read of SCSI Port Page 0 fails,
5348 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5349 * Adapter settings: async, narrow
5350 * Return 1
5351 * If read of SCSI Port Page 2 fails,
5352 * Adapter settings valid
5353 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5354 * Return 1
5355 * Else
5356 * Both valid
5357 * Return 0
5358 * CHECK - what type of locking mechanisms should be used????
5359 */
5360static int
5361mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5362{
5363 u8 *pbuf;
5364 dma_addr_t buf_dma;
5365 CONFIGPARMS cfg;
5366 ConfigPageHeader_t header;
5367 int ii;
5368 int data, rc = 0;
5369
5370 /* Allocate memory
5371 */
5372 if (!ioc->spi_data.nvram) {
5373 int sz;
5374 u8 *mem;
5375 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5376 mem = kmalloc(sz, GFP_ATOMIC);
5377 if (mem == NULL)
5378 return -EFAULT;
5379
5380 ioc->spi_data.nvram = (int *) mem;
5381
5382 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5383 ioc->name, ioc->spi_data.nvram, sz));
5384 }
5385
5386 /* Invalidate NVRAM information
5387 */
5388 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5389 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5390 }
5391
5392 /* Read SPP0 header, allocate memory, then read page.
5393 */
5394 header.PageVersion = 0;
5395 header.PageLength = 0;
5396 header.PageNumber = 0;
5397 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5398 cfg.cfghdr.hdr = &header;
5399 cfg.physAddr = -1;
5400 cfg.pageAddr = portnum;
5401 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5402 cfg.dir = 0;
5403 cfg.timeout = 0; /* use default */
5404 if (mpt_config(ioc, &cfg) != 0)
5405 return -EFAULT;
5406
5407 if (header.PageLength > 0) {
5408 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5409 if (pbuf) {
5410 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5411 cfg.physAddr = buf_dma;
5412 if (mpt_config(ioc, &cfg) != 0) {
5413 ioc->spi_data.maxBusWidth = MPT_NARROW;
5414 ioc->spi_data.maxSyncOffset = 0;
5415 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5416 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5417 rc = 1;
5418 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5419 "Unable to read PortPage0 minSyncFactor=%x\n",
5420 ioc->name, ioc->spi_data.minSyncFactor));
5421 } else {
5422 /* Save the Port Page 0 data
5423 */
5424 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
5425 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5426 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5427
5428 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5429 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5430 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5431 "noQas due to Capabilities=%x\n",
5432 ioc->name, pPP0->Capabilities));
5433 }
5434 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5435 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5436 if (data) {
5437 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5438 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5439 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5440 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5441 "PortPage0 minSyncFactor=%x\n",
5442 ioc->name, ioc->spi_data.minSyncFactor));
5443 } else {
5444 ioc->spi_data.maxSyncOffset = 0;
5445 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5446 }
5447
5448 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5449
5450 /* Update the minSyncFactor based on bus type.
5451 */
5452 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5453 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
5454
5455 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5456 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5457 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5458 "HVD or SE detected, minSyncFactor=%x\n",
5459 ioc->name, ioc->spi_data.minSyncFactor));
5460 }
5461 }
5462 }
5463 if (pbuf) {
5464 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5465 }
5466 }
5467 }
5468
5469 /* SCSI Port Page 2 - Read the header then the page.
5470 */
5471 header.PageVersion = 0;
5472 header.PageLength = 0;
5473 header.PageNumber = 2;
5474 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5475 cfg.cfghdr.hdr = &header;
5476 cfg.physAddr = -1;
5477 cfg.pageAddr = portnum;
5478 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5479 cfg.dir = 0;
5480 if (mpt_config(ioc, &cfg) != 0)
5481 return -EFAULT;
5482
5483 if (header.PageLength > 0) {
5484 /* Allocate memory and read SCSI Port Page 2
5485 */
5486 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5487 if (pbuf) {
5488 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5489 cfg.physAddr = buf_dma;
5490 if (mpt_config(ioc, &cfg) != 0) {
5491 /* Nvram data is left with INVALID mark
5492 */
5493 rc = 1;
5494 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5495
5496 /* This is an ATTO adapter, read Page2 accordingly
5497 */
5498 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
5499 ATTODeviceInfo_t *pdevice = NULL;
5500 u16 ATTOFlags;
5501
5502 /* Save the Port Page 2 data
5503 * (reformat into a 32bit quantity)
5504 */
5505 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5506 pdevice = &pPP2->DeviceSettings[ii];
5507 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5508 data = 0;
5509
5510 /* Translate ATTO device flags to LSI format
5511 */
5512 if (ATTOFlags & ATTOFLAG_DISC)
5513 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5514 if (ATTOFlags & ATTOFLAG_ID_ENB)
5515 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5516 if (ATTOFlags & ATTOFLAG_LUN_ENB)
5517 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5518 if (ATTOFlags & ATTOFLAG_TAGGED)
5519 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5520 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5521 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5522
5523 data = (data << 16) | (pdevice->Period << 8) | 10;
5524 ioc->spi_data.nvram[ii] = data;
5525 }
5526 } else {
5527 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
5528 MpiDeviceInfo_t *pdevice = NULL;
5529
5530 /*
5531 * Save "Set to Avoid SCSI Bus Resets" flag
5532 */
5533 ioc->spi_data.bus_reset =
5534 (le32_to_cpu(pPP2->PortFlags) &
5535 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5536 0 : 1 ;
5537
5538 /* Save the Port Page 2 data
5539 * (reformat into a 32bit quantity)
5540 */
5541 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5542 ioc->spi_data.PortFlags = data;
5543 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5544 pdevice = &pPP2->DeviceSettings[ii];
5545 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5546 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5547 ioc->spi_data.nvram[ii] = data;
5548 }
5549 }
5550
5551 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5552 }
5553 }
5554
5555 /* Update Adapter limits with those from NVRAM
5556 * Comment: Don't need to do this. Target performance
5557 * parameters will never exceed the adapters limits.
5558 */
5559
5560 return rc;
5561}
5562
5563/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5564/**
5565 * mpt_readScsiDevicePageHeaders - save version and length of SDP1
5566 * @ioc: Pointer to a Adapter Strucutre
5567 * @portnum: IOC port number
5568 *
5569 * Return: -EFAULT if read of config page header fails
5570 * or 0 if success.
5571 */
5572static int
5573mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5574{
5575 CONFIGPARMS cfg;
5576 ConfigPageHeader_t header;
5577
5578 /* Read the SCSI Device Page 1 header
5579 */
5580 header.PageVersion = 0;
5581 header.PageLength = 0;
5582 header.PageNumber = 1;
5583 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5584 cfg.cfghdr.hdr = &header;
5585 cfg.physAddr = -1;
5586 cfg.pageAddr = portnum;
5587 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5588 cfg.dir = 0;
5589 cfg.timeout = 0;
5590 if (mpt_config(ioc, &cfg) != 0)
5591 return -EFAULT;
5592
5593 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5594 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5595
5596 header.PageVersion = 0;
5597 header.PageLength = 0;
5598 header.PageNumber = 0;
5599 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5600 if (mpt_config(ioc, &cfg) != 0)
5601 return -EFAULT;
5602
5603 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5604 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5605
5606 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5607 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5608
5609 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5610 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5611 return 0;
5612}
5613
5614/**
5615 * mpt_inactive_raid_list_free - This clears this link list.
5616 * @ioc : pointer to per adapter structure
5617 **/
5618static void
5619mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5620{
5621 struct inactive_raid_component_info *component_info, *pNext;
5622
5623 if (list_empty(&ioc->raid_data.inactive_list))
5624 return;
5625
5626 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5627 list_for_each_entry_safe(component_info, pNext,
5628 &ioc->raid_data.inactive_list, list) {
5629 list_del(&component_info->list);
5630 kfree(component_info);
5631 }
5632 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5633}
5634
5635/**
5636 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5637 *
5638 * @ioc : pointer to per adapter structure
5639 * @channel : volume channel
5640 * @id : volume target id
5641 **/
5642static void
5643mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5644{
5645 CONFIGPARMS cfg;
5646 ConfigPageHeader_t hdr;
5647 dma_addr_t dma_handle;
5648 pRaidVolumePage0_t buffer = NULL;
5649 int i;
5650 RaidPhysDiskPage0_t phys_disk;
5651 struct inactive_raid_component_info *component_info;
5652 int handle_inactive_volumes;
5653
5654 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5655 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5656 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5657 cfg.pageAddr = (channel << 8) + id;
5658 cfg.cfghdr.hdr = &hdr;
5659 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5660
5661 if (mpt_config(ioc, &cfg) != 0)
5662 goto out;
5663
5664 if (!hdr.PageLength)
5665 goto out;
5666
5667 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5668 &dma_handle);
5669
5670 if (!buffer)
5671 goto out;
5672
5673 cfg.physAddr = dma_handle;
5674 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5675
5676 if (mpt_config(ioc, &cfg) != 0)
5677 goto out;
5678
5679 if (!buffer->NumPhysDisks)
5680 goto out;
5681
5682 handle_inactive_volumes =
5683 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5684 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5685 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5686 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5687
5688 if (!handle_inactive_volumes)
5689 goto out;
5690
5691 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5692 for (i = 0; i < buffer->NumPhysDisks; i++) {
5693 if(mpt_raid_phys_disk_pg0(ioc,
5694 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5695 continue;
5696
5697 if ((component_info = kmalloc(sizeof (*component_info),
5698 GFP_KERNEL)) == NULL)
5699 continue;
5700
5701 component_info->volumeID = id;
5702 component_info->volumeBus = channel;
5703 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5704 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5705 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5706 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5707
5708 list_add_tail(&component_info->list,
5709 &ioc->raid_data.inactive_list);
5710 }
5711 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5712
5713 out:
5714 if (buffer)
5715 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5716 dma_handle);
5717}
5718
5719/**
5720 * mpt_raid_phys_disk_pg0 - returns phys disk page zero
5721 * @ioc: Pointer to a Adapter Structure
5722 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5723 * @phys_disk: requested payload data returned
5724 *
5725 * Return:
5726 * 0 on success
5727 * -EFAULT if read of config page header fails or data pointer not NULL
5728 * -ENOMEM if pci_alloc failed
5729 **/
5730int
5731mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5732 RaidPhysDiskPage0_t *phys_disk)
5733{
5734 CONFIGPARMS cfg;
5735 ConfigPageHeader_t hdr;
5736 dma_addr_t dma_handle;
5737 pRaidPhysDiskPage0_t buffer = NULL;
5738 int rc;
5739
5740 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5741 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5742 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5743
5744 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5745 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5746 cfg.cfghdr.hdr = &hdr;
5747 cfg.physAddr = -1;
5748 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5749
5750 if (mpt_config(ioc, &cfg) != 0) {
5751 rc = -EFAULT;
5752 goto out;
5753 }
5754
5755 if (!hdr.PageLength) {
5756 rc = -EFAULT;
5757 goto out;
5758 }
5759
5760 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5761 &dma_handle);
5762
5763 if (!buffer) {
5764 rc = -ENOMEM;
5765 goto out;
5766 }
5767
5768 cfg.physAddr = dma_handle;
5769 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5770 cfg.pageAddr = phys_disk_num;
5771
5772 if (mpt_config(ioc, &cfg) != 0) {
5773 rc = -EFAULT;
5774 goto out;
5775 }
5776
5777 rc = 0;
5778 memcpy(phys_disk, buffer, sizeof(*buffer));
5779 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5780
5781 out:
5782
5783 if (buffer)
5784 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5785 dma_handle);
5786
5787 return rc;
5788}
5789
5790/**
5791 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5792 * @ioc: Pointer to a Adapter Structure
5793 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5794 *
5795 * Return:
5796 * returns number paths
5797 **/
5798int
5799mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5800{
5801 CONFIGPARMS cfg;
5802 ConfigPageHeader_t hdr;
5803 dma_addr_t dma_handle;
5804 pRaidPhysDiskPage1_t buffer = NULL;
5805 int rc;
5806
5807 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5808 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5809
5810 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5811 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5812 hdr.PageNumber = 1;
5813 cfg.cfghdr.hdr = &hdr;
5814 cfg.physAddr = -1;
5815 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5816
5817 if (mpt_config(ioc, &cfg) != 0) {
5818 rc = 0;
5819 goto out;
5820 }
5821
5822 if (!hdr.PageLength) {
5823 rc = 0;
5824 goto out;
5825 }
5826
5827 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5828 &dma_handle);
5829
5830 if (!buffer) {
5831 rc = 0;
5832 goto out;
5833 }
5834
5835 cfg.physAddr = dma_handle;
5836 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5837 cfg.pageAddr = phys_disk_num;
5838
5839 if (mpt_config(ioc, &cfg) != 0) {
5840 rc = 0;
5841 goto out;
5842 }
5843
5844 rc = buffer->NumPhysDiskPaths;
5845 out:
5846
5847 if (buffer)
5848 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5849 dma_handle);
5850
5851 return rc;
5852}
5853EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5854
5855/**
5856 * mpt_raid_phys_disk_pg1 - returns phys disk page 1
5857 * @ioc: Pointer to a Adapter Structure
5858 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5859 * @phys_disk: requested payload data returned
5860 *
5861 * Return:
5862 * 0 on success
5863 * -EFAULT if read of config page header fails or data pointer not NULL
5864 * -ENOMEM if pci_alloc failed
5865 **/
5866int
5867mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5868 RaidPhysDiskPage1_t *phys_disk)
5869{
5870 CONFIGPARMS cfg;
5871 ConfigPageHeader_t hdr;
5872 dma_addr_t dma_handle;
5873 pRaidPhysDiskPage1_t buffer = NULL;
5874 int rc;
5875 int i;
5876 __le64 sas_address;
5877
5878 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5879 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5880 rc = 0;
5881
5882 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5883 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5884 hdr.PageNumber = 1;
5885 cfg.cfghdr.hdr = &hdr;
5886 cfg.physAddr = -1;
5887 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5888
5889 if (mpt_config(ioc, &cfg) != 0) {
5890 rc = -EFAULT;
5891 goto out;
5892 }
5893
5894 if (!hdr.PageLength) {
5895 rc = -EFAULT;
5896 goto out;
5897 }
5898
5899 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5900 &dma_handle);
5901
5902 if (!buffer) {
5903 rc = -ENOMEM;
5904 goto out;
5905 }
5906
5907 cfg.physAddr = dma_handle;
5908 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5909 cfg.pageAddr = phys_disk_num;
5910
5911 if (mpt_config(ioc, &cfg) != 0) {
5912 rc = -EFAULT;
5913 goto out;
5914 }
5915
5916 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5917 phys_disk->PhysDiskNum = phys_disk_num;
5918 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5919 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5920 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5921 phys_disk->Path[i].OwnerIdentifier =
5922 buffer->Path[i].OwnerIdentifier;
5923 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5924 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5925 sas_address = le64_to_cpu(sas_address);
5926 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5927 memcpy(&sas_address,
5928 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5929 sas_address = le64_to_cpu(sas_address);
5930 memcpy(&phys_disk->Path[i].OwnerWWID,
5931 &sas_address, sizeof(__le64));
5932 }
5933
5934 out:
5935
5936 if (buffer)
5937 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5938 dma_handle);
5939
5940 return rc;
5941}
5942EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5943
5944
5945/**
5946 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5947 * @ioc: Pointer to a Adapter Strucutre
5948 *
5949 * Return:
5950 * 0 on success
5951 * -EFAULT if read of config page header fails or data pointer not NULL
5952 * -ENOMEM if pci_alloc failed
5953 **/
5954int
5955mpt_findImVolumes(MPT_ADAPTER *ioc)
5956{
5957 IOCPage2_t *pIoc2;
5958 u8 *mem;
5959 dma_addr_t ioc2_dma;
5960 CONFIGPARMS cfg;
5961 ConfigPageHeader_t header;
5962 int rc = 0;
5963 int iocpage2sz;
5964 int i;
5965
5966 if (!ioc->ir_firmware)
5967 return 0;
5968
5969 /* Free the old page
5970 */
5971 kfree(ioc->raid_data.pIocPg2);
5972 ioc->raid_data.pIocPg2 = NULL;
5973 mpt_inactive_raid_list_free(ioc);
5974
5975 /* Read IOCP2 header then the page.
5976 */
5977 header.PageVersion = 0;
5978 header.PageLength = 0;
5979 header.PageNumber = 2;
5980 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5981 cfg.cfghdr.hdr = &header;
5982 cfg.physAddr = -1;
5983 cfg.pageAddr = 0;
5984 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5985 cfg.dir = 0;
5986 cfg.timeout = 0;
5987 if (mpt_config(ioc, &cfg) != 0)
5988 return -EFAULT;
5989
5990 if (header.PageLength == 0)
5991 return -EFAULT;
5992
5993 iocpage2sz = header.PageLength * 4;
5994 pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
5995 if (!pIoc2)
5996 return -ENOMEM;
5997
5998 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5999 cfg.physAddr = ioc2_dma;
6000 if (mpt_config(ioc, &cfg) != 0)
6001 goto out;
6002
6003 mem = kmemdup(pIoc2, iocpage2sz, GFP_KERNEL);
6004 if (!mem) {
6005 rc = -ENOMEM;
6006 goto out;
6007 }
6008
6009 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6010
6011 mpt_read_ioc_pg_3(ioc);
6012
6013 for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6014 mpt_inactive_raid_volumes(ioc,
6015 pIoc2->RaidVolume[i].VolumeBus,
6016 pIoc2->RaidVolume[i].VolumeID);
6017
6018 out:
6019 pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
6020
6021 return rc;
6022}
6023
6024static int
6025mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6026{
6027 IOCPage3_t *pIoc3;
6028 u8 *mem;
6029 CONFIGPARMS cfg;
6030 ConfigPageHeader_t header;
6031 dma_addr_t ioc3_dma;
6032 int iocpage3sz = 0;
6033
6034 /* Free the old page
6035 */
6036 kfree(ioc->raid_data.pIocPg3);
6037 ioc->raid_data.pIocPg3 = NULL;
6038
6039 /* There is at least one physical disk.
6040 * Read and save IOC Page 3
6041 */
6042 header.PageVersion = 0;
6043 header.PageLength = 0;
6044 header.PageNumber = 3;
6045 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6046 cfg.cfghdr.hdr = &header;
6047 cfg.physAddr = -1;
6048 cfg.pageAddr = 0;
6049 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6050 cfg.dir = 0;
6051 cfg.timeout = 0;
6052 if (mpt_config(ioc, &cfg) != 0)
6053 return 0;
6054
6055 if (header.PageLength == 0)
6056 return 0;
6057
6058 /* Read Header good, alloc memory
6059 */
6060 iocpage3sz = header.PageLength * 4;
6061 pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
6062 if (!pIoc3)
6063 return 0;
6064
6065 /* Read the Page and save the data
6066 * into malloc'd memory.
6067 */
6068 cfg.physAddr = ioc3_dma;
6069 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6070 if (mpt_config(ioc, &cfg) == 0) {
6071 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6072 if (mem) {
6073 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6074 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6075 }
6076 }
6077
6078 pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
6079
6080 return 0;
6081}
6082
6083static void
6084mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6085{
6086 IOCPage4_t *pIoc4;
6087 CONFIGPARMS cfg;
6088 ConfigPageHeader_t header;
6089 dma_addr_t ioc4_dma;
6090 int iocpage4sz;
6091
6092 /* Read and save IOC Page 4
6093 */
6094 header.PageVersion = 0;
6095 header.PageLength = 0;
6096 header.PageNumber = 4;
6097 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6098 cfg.cfghdr.hdr = &header;
6099 cfg.physAddr = -1;
6100 cfg.pageAddr = 0;
6101 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6102 cfg.dir = 0;
6103 cfg.timeout = 0;
6104 if (mpt_config(ioc, &cfg) != 0)
6105 return;
6106
6107 if (header.PageLength == 0)
6108 return;
6109
6110 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6111 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6112 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
6113 if (!pIoc4)
6114 return;
6115 ioc->alloc_total += iocpage4sz;
6116 } else {
6117 ioc4_dma = ioc->spi_data.IocPg4_dma;
6118 iocpage4sz = ioc->spi_data.IocPg4Sz;
6119 }
6120
6121 /* Read the Page into dma memory.
6122 */
6123 cfg.physAddr = ioc4_dma;
6124 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6125 if (mpt_config(ioc, &cfg) == 0) {
6126 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6127 ioc->spi_data.IocPg4_dma = ioc4_dma;
6128 ioc->spi_data.IocPg4Sz = iocpage4sz;
6129 } else {
6130 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
6131 ioc->spi_data.pIocPg4 = NULL;
6132 ioc->alloc_total -= iocpage4sz;
6133 }
6134}
6135
6136static void
6137mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6138{
6139 IOCPage1_t *pIoc1;
6140 CONFIGPARMS cfg;
6141 ConfigPageHeader_t header;
6142 dma_addr_t ioc1_dma;
6143 int iocpage1sz = 0;
6144 u32 tmp;
6145
6146 /* Check the Coalescing Timeout in IOC Page 1
6147 */
6148 header.PageVersion = 0;
6149 header.PageLength = 0;
6150 header.PageNumber = 1;
6151 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6152 cfg.cfghdr.hdr = &header;
6153 cfg.physAddr = -1;
6154 cfg.pageAddr = 0;
6155 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6156 cfg.dir = 0;
6157 cfg.timeout = 0;
6158 if (mpt_config(ioc, &cfg) != 0)
6159 return;
6160
6161 if (header.PageLength == 0)
6162 return;
6163
6164 /* Read Header good, alloc memory
6165 */
6166 iocpage1sz = header.PageLength * 4;
6167 pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
6168 if (!pIoc1)
6169 return;
6170
6171 /* Read the Page and check coalescing timeout
6172 */
6173 cfg.physAddr = ioc1_dma;
6174 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6175 if (mpt_config(ioc, &cfg) == 0) {
6176
6177 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6178 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6179 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6180
6181 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6182 ioc->name, tmp));
6183
6184 if (tmp > MPT_COALESCING_TIMEOUT) {
6185 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6186
6187 /* Write NVRAM and current
6188 */
6189 cfg.dir = 1;
6190 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6191 if (mpt_config(ioc, &cfg) == 0) {
6192 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6193 ioc->name, MPT_COALESCING_TIMEOUT));
6194
6195 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6196 if (mpt_config(ioc, &cfg) == 0) {
6197 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6198 "Reset NVRAM Coalescing Timeout to = %d\n",
6199 ioc->name, MPT_COALESCING_TIMEOUT));
6200 } else {
6201 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6202 "Reset NVRAM Coalescing Timeout Failed\n",
6203 ioc->name));
6204 }
6205
6206 } else {
6207 dprintk(ioc, printk(MYIOC_s_WARN_FMT
6208 "Reset of Current Coalescing Timeout Failed!\n",
6209 ioc->name));
6210 }
6211 }
6212
6213 } else {
6214 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6215 }
6216 }
6217
6218 pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
6219
6220 return;
6221}
6222
6223static void
6224mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6225{
6226 CONFIGPARMS cfg;
6227 ConfigPageHeader_t hdr;
6228 dma_addr_t buf_dma;
6229 ManufacturingPage0_t *pbuf = NULL;
6230
6231 memset(&cfg, 0 , sizeof(CONFIGPARMS));
6232 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6233
6234 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6235 cfg.cfghdr.hdr = &hdr;
6236 cfg.physAddr = -1;
6237 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6238 cfg.timeout = 10;
6239
6240 if (mpt_config(ioc, &cfg) != 0)
6241 goto out;
6242
6243 if (!cfg.cfghdr.hdr->PageLength)
6244 goto out;
6245
6246 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6247 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
6248 if (!pbuf)
6249 goto out;
6250
6251 cfg.physAddr = buf_dma;
6252
6253 if (mpt_config(ioc, &cfg) != 0)
6254 goto out;
6255
6256 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6257 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6258 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6259
6260out:
6261
6262 if (pbuf)
6263 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
6264}
6265
6266/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6267/**
6268 * SendEventNotification - Send EventNotification (on or off) request to adapter
6269 * @ioc: Pointer to MPT_ADAPTER structure
6270 * @EvSwitch: Event switch flags
6271 * @sleepFlag: Specifies whether the process can sleep
6272 */
6273static int
6274SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6275{
6276 EventNotification_t evn;
6277 MPIDefaultReply_t reply_buf;
6278
6279 memset(&evn, 0, sizeof(EventNotification_t));
6280 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6281
6282 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6283 evn.Switch = EvSwitch;
6284 evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6285
6286 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6287 "Sending EventNotification (%d) request %p\n",
6288 ioc->name, EvSwitch, &evn));
6289
6290 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6291 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6292 sleepFlag);
6293}
6294
6295/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6296/**
6297 * SendEventAck - Send EventAck request to MPT adapter.
6298 * @ioc: Pointer to MPT_ADAPTER structure
6299 * @evnp: Pointer to original EventNotification request
6300 */
6301static int
6302SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6303{
6304 EventAck_t *pAck;
6305
6306 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6307 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6308 ioc->name, __func__));
6309 return -1;
6310 }
6311
6312 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6313
6314 pAck->Function = MPI_FUNCTION_EVENT_ACK;
6315 pAck->ChainOffset = 0;
6316 pAck->Reserved[0] = pAck->Reserved[1] = 0;
6317 pAck->MsgFlags = 0;
6318 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6319 pAck->Event = evnp->Event;
6320 pAck->EventContext = evnp->EventContext;
6321
6322 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6323
6324 return 0;
6325}
6326
6327/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6328/**
6329 * mpt_config - Generic function to issue config message
6330 * @ioc: Pointer to an adapter structure
6331 * @pCfg: Pointer to a configuration structure. Struct contains
6332 * action, page address, direction, physical address
6333 * and pointer to a configuration page header
6334 * Page header is updated.
6335 *
6336 * Returns 0 for success
6337 * -EAGAIN if no msg frames currently available
6338 * -EFAULT for non-successful reply or no reply (timeout)
6339 */
6340int
6341mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6342{
6343 Config_t *pReq;
6344 ConfigReply_t *pReply;
6345 ConfigExtendedPageHeader_t *pExtHdr = NULL;
6346 MPT_FRAME_HDR *mf;
6347 int ii;
6348 int flagsLength;
6349 long timeout;
6350 int ret;
6351 u8 page_type = 0, extend_page;
6352 unsigned long timeleft;
6353 unsigned long flags;
6354 u8 issue_hard_reset = 0;
6355 u8 retry_count = 0;
6356
6357 might_sleep();
6358
6359 /* don't send a config page during diag reset */
6360 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6361 if (ioc->ioc_reset_in_progress) {
6362 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6363 "%s: busy with host reset\n", ioc->name, __func__));
6364 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6365 return -EBUSY;
6366 }
6367 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6368
6369 /* don't send if no chance of success */
6370 if (!ioc->active ||
6371 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6372 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6373 "%s: ioc not operational, %d, %xh\n",
6374 ioc->name, __func__, ioc->active,
6375 mpt_GetIocState(ioc, 0)));
6376 return -EFAULT;
6377 }
6378
6379 retry_config:
6380 mutex_lock(&ioc->mptbase_cmds.mutex);
6381 /* init the internal cmd struct */
6382 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6383 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6384
6385 /* Get and Populate a free Frame
6386 */
6387 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6388 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6389 "mpt_config: no msg frames!\n", ioc->name));
6390 ret = -EAGAIN;
6391 goto out;
6392 }
6393
6394 pReq = (Config_t *)mf;
6395 pReq->Action = pCfg->action;
6396 pReq->Reserved = 0;
6397 pReq->ChainOffset = 0;
6398 pReq->Function = MPI_FUNCTION_CONFIG;
6399
6400 /* Assume page type is not extended and clear "reserved" fields. */
6401 pReq->ExtPageLength = 0;
6402 pReq->ExtPageType = 0;
6403 pReq->MsgFlags = 0;
6404
6405 for (ii=0; ii < 8; ii++)
6406 pReq->Reserved2[ii] = 0;
6407
6408 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6409 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6410 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6411 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6412
6413 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6414 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6415 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6416 pReq->ExtPageType = pExtHdr->ExtPageType;
6417 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6418
6419 /* Page Length must be treated as a reserved field for the
6420 * extended header.
6421 */
6422 pReq->Header.PageLength = 0;
6423 }
6424
6425 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6426
6427 /* Add a SGE to the config request.
6428 */
6429 if (pCfg->dir)
6430 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6431 else
6432 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6433
6434 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6435 MPI_CONFIG_PAGETYPE_EXTENDED) {
6436 flagsLength |= pExtHdr->ExtPageLength * 4;
6437 page_type = pReq->ExtPageType;
6438 extend_page = 1;
6439 } else {
6440 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6441 page_type = pReq->Header.PageType;
6442 extend_page = 0;
6443 }
6444
6445 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6446 "Sending Config request type 0x%x, page 0x%x and action %d\n",
6447 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6448
6449 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6450 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6451 mpt_put_msg_frame(mpt_base_index, ioc, mf);
6452 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6453 timeout);
6454 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6455 ret = -ETIME;
6456 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6457 "Failed Sending Config request type 0x%x, page 0x%x,"
6458 " action %d, status %xh, time left %ld\n\n",
6459 ioc->name, page_type, pReq->Header.PageNumber,
6460 pReq->Action, ioc->mptbase_cmds.status, timeleft));
6461 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6462 goto out;
6463 if (!timeleft) {
6464 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6465 if (ioc->ioc_reset_in_progress) {
6466 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6467 flags);
6468 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6469 " progress mpt_config timed out.!!\n",
6470 __func__, ioc->name);
6471 mutex_unlock(&ioc->mptbase_cmds.mutex);
6472 return -EFAULT;
6473 }
6474 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6475 issue_hard_reset = 1;
6476 }
6477 goto out;
6478 }
6479
6480 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6481 ret = -1;
6482 goto out;
6483 }
6484 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6485 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6486 if (ret == MPI_IOCSTATUS_SUCCESS) {
6487 if (extend_page) {
6488 pCfg->cfghdr.ehdr->ExtPageLength =
6489 le16_to_cpu(pReply->ExtPageLength);
6490 pCfg->cfghdr.ehdr->ExtPageType =
6491 pReply->ExtPageType;
6492 }
6493 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6494 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6495 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6496 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6497
6498 }
6499
6500 if (retry_count)
6501 printk(MYIOC_s_INFO_FMT "Retry completed "
6502 "ret=0x%x timeleft=%ld\n",
6503 ioc->name, ret, timeleft);
6504
6505 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6506 ret, le32_to_cpu(pReply->IOCLogInfo)));
6507
6508out:
6509
6510 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6511 mutex_unlock(&ioc->mptbase_cmds.mutex);
6512 if (issue_hard_reset) {
6513 issue_hard_reset = 0;
6514 printk(MYIOC_s_WARN_FMT
6515 "Issuing Reset from %s!!, doorbell=0x%08x\n",
6516 ioc->name, __func__, mpt_GetIocState(ioc, 0));
6517 if (retry_count == 0) {
6518 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6519 retry_count++;
6520 } else
6521 mpt_HardResetHandler(ioc, CAN_SLEEP);
6522
6523 mpt_free_msg_frame(ioc, mf);
6524 /* attempt one retry for a timed out command */
6525 if (retry_count < 2) {
6526 printk(MYIOC_s_INFO_FMT
6527 "Attempting Retry Config request"
6528 " type 0x%x, page 0x%x,"
6529 " action %d\n", ioc->name, page_type,
6530 pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6531 retry_count++;
6532 goto retry_config;
6533 }
6534 }
6535 return ret;
6536
6537}
6538
6539/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6540/**
6541 * mpt_ioc_reset - Base cleanup for hard reset
6542 * @ioc: Pointer to the adapter structure
6543 * @reset_phase: Indicates pre- or post-reset functionality
6544 *
6545 * Remark: Frees resources with internally generated commands.
6546 */
6547static int
6548mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6549{
6550 switch (reset_phase) {
6551 case MPT_IOC_SETUP_RESET:
6552 ioc->taskmgmt_quiesce_io = 1;
6553 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6554 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6555 break;
6556 case MPT_IOC_PRE_RESET:
6557 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6558 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6559 break;
6560 case MPT_IOC_POST_RESET:
6561 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6562 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
6563/* wake up mptbase_cmds */
6564 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6565 ioc->mptbase_cmds.status |=
6566 MPT_MGMT_STATUS_DID_IOCRESET;
6567 complete(&ioc->mptbase_cmds.done);
6568 }
6569/* wake up taskmgmt_cmds */
6570 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6571 ioc->taskmgmt_cmds.status |=
6572 MPT_MGMT_STATUS_DID_IOCRESET;
6573 complete(&ioc->taskmgmt_cmds.done);
6574 }
6575 break;
6576 default:
6577 break;
6578 }
6579
6580 return 1; /* currently means nothing really */
6581}
6582
6583
6584#ifdef CONFIG_PROC_FS /* { */
6585/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6586/*
6587 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6588 */
6589/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6590/**
6591 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6592 *
6593 * Returns 0 for success, non-zero for failure.
6594 */
6595static int
6596procmpt_create(void)
6597{
6598 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6599 if (mpt_proc_root_dir == NULL)
6600 return -ENOTDIR;
6601
6602 proc_create_single("summary", S_IRUGO, mpt_proc_root_dir,
6603 mpt_summary_proc_show);
6604 proc_create_single("version", S_IRUGO, mpt_proc_root_dir,
6605 mpt_version_proc_show);
6606 return 0;
6607}
6608
6609/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6610/**
6611 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6612 *
6613 * Returns 0 for success, non-zero for failure.
6614 */
6615static void
6616procmpt_destroy(void)
6617{
6618 remove_proc_entry("version", mpt_proc_root_dir);
6619 remove_proc_entry("summary", mpt_proc_root_dir);
6620 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6621}
6622
6623/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6624/*
6625 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6626 */
6627static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6628
6629static int mpt_summary_proc_show(struct seq_file *m, void *v)
6630{
6631 MPT_ADAPTER *ioc = m->private;
6632
6633 if (ioc) {
6634 seq_mpt_print_ioc_summary(ioc, m, 1);
6635 } else {
6636 list_for_each_entry(ioc, &ioc_list, list) {
6637 seq_mpt_print_ioc_summary(ioc, m, 1);
6638 }
6639 }
6640
6641 return 0;
6642}
6643
6644static int mpt_version_proc_show(struct seq_file *m, void *v)
6645{
6646 u8 cb_idx;
6647 int scsi, fc, sas, lan, ctl, targ, dmp;
6648 char *drvname;
6649
6650 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6651 seq_printf(m, " Fusion MPT base driver\n");
6652
6653 scsi = fc = sas = lan = ctl = targ = dmp = 0;
6654 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6655 drvname = NULL;
6656 if (MptCallbacks[cb_idx]) {
6657 switch (MptDriverClass[cb_idx]) {
6658 case MPTSPI_DRIVER:
6659 if (!scsi++) drvname = "SPI host";
6660 break;
6661 case MPTFC_DRIVER:
6662 if (!fc++) drvname = "FC host";
6663 break;
6664 case MPTSAS_DRIVER:
6665 if (!sas++) drvname = "SAS host";
6666 break;
6667 case MPTLAN_DRIVER:
6668 if (!lan++) drvname = "LAN";
6669 break;
6670 case MPTSTM_DRIVER:
6671 if (!targ++) drvname = "SCSI target";
6672 break;
6673 case MPTCTL_DRIVER:
6674 if (!ctl++) drvname = "ioctl";
6675 break;
6676 }
6677
6678 if (drvname)
6679 seq_printf(m, " Fusion MPT %s driver\n", drvname);
6680 }
6681 }
6682
6683 return 0;
6684}
6685
6686static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6687{
6688 MPT_ADAPTER *ioc = m->private;
6689 char expVer[32];
6690 int sz;
6691 int p;
6692
6693 mpt_get_fw_exp_ver(expVer, ioc);
6694
6695 seq_printf(m, "%s:", ioc->name);
6696 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6697 seq_printf(m, " (f/w download boot flag set)");
6698// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6699// seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
6700
6701 seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
6702 ioc->facts.ProductID,
6703 ioc->prod_name);
6704 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6705 if (ioc->facts.FWImageSize)
6706 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6707 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6708 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6709 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
6710
6711 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
6712 ioc->facts.CurrentHostMfaHighAddr);
6713 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
6714 ioc->facts.CurrentSenseBufferHighAddr);
6715
6716 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6717 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6718
6719 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6720 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6721 /*
6722 * Rounding UP to nearest 4-kB boundary here...
6723 */
6724 sz = (ioc->req_sz * ioc->req_depth) + 128;
6725 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6726 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6727 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6728 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
6729 4*ioc->facts.RequestFrameSize,
6730 ioc->facts.GlobalCredits);
6731
6732 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
6733 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6734 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6735 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6736 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6737 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
6738 ioc->facts.CurReplyFrameSize,
6739 ioc->facts.ReplyQueueDepth);
6740
6741 seq_printf(m, " MaxDevices = %d\n",
6742 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6743 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
6744
6745 /* per-port info */
6746 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6747 seq_printf(m, " PortNumber = %d (of %d)\n",
6748 p+1,
6749 ioc->facts.NumberOfPorts);
6750 if (ioc->bus_type == FC) {
6751 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6752 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6753 seq_printf(m, " LanAddr = %pMR\n", a);
6754 }
6755 seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
6756 ioc->fc_port_page0[p].WWNN.High,
6757 ioc->fc_port_page0[p].WWNN.Low,
6758 ioc->fc_port_page0[p].WWPN.High,
6759 ioc->fc_port_page0[p].WWPN.Low);
6760 }
6761 }
6762
6763 return 0;
6764}
6765#endif /* CONFIG_PROC_FS } */
6766
6767/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6768static void
6769mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6770{
6771 buf[0] ='\0';
6772 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6773 sprintf(buf, " (Exp %02d%02d)",
6774 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
6775 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
6776
6777 /* insider hack! */
6778 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6779 strcat(buf, " [MDBG]");
6780 }
6781}
6782
6783/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6784/**
6785 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6786 * @ioc: Pointer to MPT_ADAPTER structure
6787 * @buffer: Pointer to buffer where IOC summary info should be written
6788 * @size: Pointer to number of bytes we wrote (set by this routine)
6789 * @len: Offset at which to start writing in buffer
6790 * @showlan: Display LAN stuff?
6791 *
6792 * This routine writes (english readable) ASCII text, which represents
6793 * a summary of IOC information, to a buffer.
6794 */
6795void
6796mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6797{
6798 char expVer[32];
6799 int y;
6800
6801 mpt_get_fw_exp_ver(expVer, ioc);
6802
6803 /*
6804 * Shorter summary of attached ioc's...
6805 */
6806 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6807 ioc->name,
6808 ioc->prod_name,
6809 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6810 ioc->facts.FWVersion.Word,
6811 expVer,
6812 ioc->facts.NumberOfPorts,
6813 ioc->req_depth);
6814
6815 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6816 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6817 y += sprintf(buffer+len+y, ", LanAddr=%pMR", a);
6818 }
6819
6820 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6821
6822 if (!ioc->active)
6823 y += sprintf(buffer+len+y, " (disabled)");
6824
6825 y += sprintf(buffer+len+y, "\n");
6826
6827 *size = y;
6828}
6829
6830#ifdef CONFIG_PROC_FS
6831static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6832{
6833 char expVer[32];
6834
6835 mpt_get_fw_exp_ver(expVer, ioc);
6836
6837 /*
6838 * Shorter summary of attached ioc's...
6839 */
6840 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6841 ioc->name,
6842 ioc->prod_name,
6843 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6844 ioc->facts.FWVersion.Word,
6845 expVer,
6846 ioc->facts.NumberOfPorts,
6847 ioc->req_depth);
6848
6849 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6850 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6851 seq_printf(m, ", LanAddr=%pMR", a);
6852 }
6853
6854 seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6855
6856 if (!ioc->active)
6857 seq_printf(m, " (disabled)");
6858
6859 seq_putc(m, '\n');
6860}
6861#endif
6862
6863/**
6864 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6865 * @ioc: Pointer to MPT_ADAPTER structure
6866 *
6867 * Returns 0 for SUCCESS or -1 if FAILED.
6868 *
6869 * If -1 is return, then it was not possible to set the flags
6870 **/
6871int
6872mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6873{
6874 unsigned long flags;
6875 int retval;
6876
6877 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6878 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6879 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6880 retval = -1;
6881 goto out;
6882 }
6883 retval = 0;
6884 ioc->taskmgmt_in_progress = 1;
6885 ioc->taskmgmt_quiesce_io = 1;
6886 if (ioc->alt_ioc) {
6887 ioc->alt_ioc->taskmgmt_in_progress = 1;
6888 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6889 }
6890 out:
6891 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6892 return retval;
6893}
6894EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6895
6896/**
6897 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6898 * @ioc: Pointer to MPT_ADAPTER structure
6899 *
6900 **/
6901void
6902mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6903{
6904 unsigned long flags;
6905
6906 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6907 ioc->taskmgmt_in_progress = 0;
6908 ioc->taskmgmt_quiesce_io = 0;
6909 if (ioc->alt_ioc) {
6910 ioc->alt_ioc->taskmgmt_in_progress = 0;
6911 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6912 }
6913 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6914}
6915EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6916
6917
6918/**
6919 * mpt_halt_firmware - Halts the firmware if it is operational and panic
6920 * the kernel
6921 * @ioc: Pointer to MPT_ADAPTER structure
6922 *
6923 **/
6924void
6925mpt_halt_firmware(MPT_ADAPTER *ioc)
6926{
6927 u32 ioc_raw_state;
6928
6929 ioc_raw_state = mpt_GetIocState(ioc, 0);
6930
6931 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6932 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6933 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6934 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6935 ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6936 } else {
6937 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6938 panic("%s: Firmware is halted due to command timeout\n",
6939 ioc->name);
6940 }
6941}
6942EXPORT_SYMBOL(mpt_halt_firmware);
6943
6944/**
6945 * mpt_SoftResetHandler - Issues a less expensive reset
6946 * @ioc: Pointer to MPT_ADAPTER structure
6947 * @sleepFlag: Indicates if sleep or schedule must be called.
6948 *
6949 * Returns 0 for SUCCESS or -1 if FAILED.
6950 *
6951 * Message Unit Reset - instructs the IOC to reset the Reply Post and
6952 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
6953 * All posted buffers are freed, and event notification is turned off.
6954 * IOC doesn't reply to any outstanding request. This will transfer IOC
6955 * to READY state.
6956 **/
6957static int
6958mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
6959{
6960 int rc;
6961 int ii;
6962 u8 cb_idx;
6963 unsigned long flags;
6964 u32 ioc_state;
6965 unsigned long time_count;
6966
6967 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
6968 ioc->name));
6969
6970 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
6971
6972 if (mpt_fwfault_debug)
6973 mpt_halt_firmware(ioc);
6974
6975 if (ioc_state == MPI_IOC_STATE_FAULT ||
6976 ioc_state == MPI_IOC_STATE_RESET) {
6977 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6978 "skipping, either in FAULT or RESET state!\n", ioc->name));
6979 return -1;
6980 }
6981
6982 if (ioc->bus_type == FC) {
6983 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6984 "skipping, because the bus type is FC!\n", ioc->name));
6985 return -1;
6986 }
6987
6988 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6989 if (ioc->ioc_reset_in_progress) {
6990 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6991 return -1;
6992 }
6993 ioc->ioc_reset_in_progress = 1;
6994 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6995
6996 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6997 if (MptResetHandlers[cb_idx])
6998 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
6999 }
7000
7001 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7002 if (ioc->taskmgmt_in_progress) {
7003 ioc->ioc_reset_in_progress = 0;
7004 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7005 return -1;
7006 }
7007 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7008 /* Disable reply interrupts (also blocks FreeQ) */
7009 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7010 ioc->active = 0;
7011 time_count = jiffies;
7012
7013 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7014
7015 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7016 if (MptResetHandlers[cb_idx])
7017 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7018 }
7019
7020 if (rc)
7021 goto out;
7022
7023 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7024 if (ioc_state != MPI_IOC_STATE_READY)
7025 goto out;
7026
7027 for (ii = 0; ii < 5; ii++) {
7028 /* Get IOC facts! Allow 5 retries */
7029 rc = GetIocFacts(ioc, sleepFlag,
7030 MPT_HOSTEVENT_IOC_RECOVER);
7031 if (rc == 0)
7032 break;
7033 if (sleepFlag == CAN_SLEEP)
7034 msleep(100);
7035 else
7036 mdelay(100);
7037 }
7038 if (ii == 5)
7039 goto out;
7040
7041 rc = PrimeIocFifos(ioc);
7042 if (rc != 0)
7043 goto out;
7044
7045 rc = SendIocInit(ioc, sleepFlag);
7046 if (rc != 0)
7047 goto out;
7048
7049 rc = SendEventNotification(ioc, 1, sleepFlag);
7050 if (rc != 0)
7051 goto out;
7052
7053 if (ioc->hard_resets < -1)
7054 ioc->hard_resets++;
7055
7056 /*
7057 * At this point, we know soft reset succeeded.
7058 */
7059
7060 ioc->active = 1;
7061 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7062
7063 out:
7064 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7065 ioc->ioc_reset_in_progress = 0;
7066 ioc->taskmgmt_quiesce_io = 0;
7067 ioc->taskmgmt_in_progress = 0;
7068 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7069
7070 if (ioc->active) { /* otherwise, hard reset coming */
7071 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7072 if (MptResetHandlers[cb_idx])
7073 mpt_signal_reset(cb_idx, ioc,
7074 MPT_IOC_POST_RESET);
7075 }
7076 }
7077
7078 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7079 "SoftResetHandler: completed (%d seconds): %s\n",
7080 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7081 ((rc == 0) ? "SUCCESS" : "FAILED")));
7082
7083 return rc;
7084}
7085
7086/**
7087 * mpt_Soft_Hard_ResetHandler - Try less expensive reset
7088 * @ioc: Pointer to MPT_ADAPTER structure
7089 * @sleepFlag: Indicates if sleep or schedule must be called.
7090 *
7091 * Returns 0 for SUCCESS or -1 if FAILED.
7092 * Try for softreset first, only if it fails go for expensive
7093 * HardReset.
7094 **/
7095int
7096mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7097 int ret = -1;
7098
7099 ret = mpt_SoftResetHandler(ioc, sleepFlag);
7100 if (ret == 0)
7101 return ret;
7102 ret = mpt_HardResetHandler(ioc, sleepFlag);
7103 return ret;
7104}
7105EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7106
7107/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7108/*
7109 * Reset Handling
7110 */
7111/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7112/**
7113 * mpt_HardResetHandler - Generic reset handler
7114 * @ioc: Pointer to MPT_ADAPTER structure
7115 * @sleepFlag: Indicates if sleep or schedule must be called.
7116 *
7117 * Issues SCSI Task Management call based on input arg values.
7118 * If TaskMgmt fails, returns associated SCSI request.
7119 *
7120 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7121 * or a non-interrupt thread. In the former, must not call schedule().
7122 *
7123 * Note: A return of -1 is a FATAL error case, as it means a
7124 * FW reload/initialization failed.
7125 *
7126 * Returns 0 for SUCCESS or -1 if FAILED.
7127 */
7128int
7129mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7130{
7131 int rc;
7132 u8 cb_idx;
7133 unsigned long flags;
7134 unsigned long time_count;
7135
7136 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7137#ifdef MFCNT
7138 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7139 printk("MF count 0x%x !\n", ioc->mfcnt);
7140#endif
7141 if (mpt_fwfault_debug)
7142 mpt_halt_firmware(ioc);
7143
7144 /* Reset the adapter. Prevent more than 1 call to
7145 * mpt_do_ioc_recovery at any instant in time.
7146 */
7147 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7148 if (ioc->ioc_reset_in_progress) {
7149 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7150 ioc->wait_on_reset_completion = 1;
7151 do {
7152 ssleep(1);
7153 } while (ioc->ioc_reset_in_progress == 1);
7154 ioc->wait_on_reset_completion = 0;
7155 return ioc->reset_status;
7156 }
7157 if (ioc->wait_on_reset_completion) {
7158 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7159 rc = 0;
7160 time_count = jiffies;
7161 goto exit;
7162 }
7163 ioc->ioc_reset_in_progress = 1;
7164 if (ioc->alt_ioc)
7165 ioc->alt_ioc->ioc_reset_in_progress = 1;
7166 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7167
7168
7169 /* The SCSI driver needs to adjust timeouts on all current
7170 * commands prior to the diagnostic reset being issued.
7171 * Prevents timeouts occurring during a diagnostic reset...very bad.
7172 * For all other protocol drivers, this is a no-op.
7173 */
7174 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7175 if (MptResetHandlers[cb_idx]) {
7176 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7177 if (ioc->alt_ioc)
7178 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7179 MPT_IOC_SETUP_RESET);
7180 }
7181 }
7182
7183 time_count = jiffies;
7184 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7185 if (rc != 0) {
7186 printk(KERN_WARNING MYNAM
7187 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7188 rc, ioc->name, mpt_GetIocState(ioc, 0));
7189 } else {
7190 if (ioc->hard_resets < -1)
7191 ioc->hard_resets++;
7192 }
7193
7194 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7195 ioc->ioc_reset_in_progress = 0;
7196 ioc->taskmgmt_quiesce_io = 0;
7197 ioc->taskmgmt_in_progress = 0;
7198 ioc->reset_status = rc;
7199 if (ioc->alt_ioc) {
7200 ioc->alt_ioc->ioc_reset_in_progress = 0;
7201 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7202 ioc->alt_ioc->taskmgmt_in_progress = 0;
7203 }
7204 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7205
7206 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7207 if (MptResetHandlers[cb_idx]) {
7208 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7209 if (ioc->alt_ioc)
7210 mpt_signal_reset(cb_idx,
7211 ioc->alt_ioc, MPT_IOC_POST_RESET);
7212 }
7213 }
7214exit:
7215 dtmprintk(ioc,
7216 printk(MYIOC_s_DEBUG_FMT
7217 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7218 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7219 "SUCCESS" : "FAILED")));
7220
7221 return rc;
7222}
7223
7224#ifdef CONFIG_FUSION_LOGGING
7225static void
7226mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7227{
7228 char *ds = NULL;
7229 u32 evData0;
7230 int ii;
7231 u8 event;
7232 char *evStr = ioc->evStr;
7233
7234 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7235 evData0 = le32_to_cpu(pEventReply->Data[0]);
7236
7237 switch(event) {
7238 case MPI_EVENT_NONE:
7239 ds = "None";
7240 break;
7241 case MPI_EVENT_LOG_DATA:
7242 ds = "Log Data";
7243 break;
7244 case MPI_EVENT_STATE_CHANGE:
7245 ds = "State Change";
7246 break;
7247 case MPI_EVENT_UNIT_ATTENTION:
7248 ds = "Unit Attention";
7249 break;
7250 case MPI_EVENT_IOC_BUS_RESET:
7251 ds = "IOC Bus Reset";
7252 break;
7253 case MPI_EVENT_EXT_BUS_RESET:
7254 ds = "External Bus Reset";
7255 break;
7256 case MPI_EVENT_RESCAN:
7257 ds = "Bus Rescan Event";
7258 break;
7259 case MPI_EVENT_LINK_STATUS_CHANGE:
7260 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7261 ds = "Link Status(FAILURE) Change";
7262 else
7263 ds = "Link Status(ACTIVE) Change";
7264 break;
7265 case MPI_EVENT_LOOP_STATE_CHANGE:
7266 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7267 ds = "Loop State(LIP) Change";
7268 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7269 ds = "Loop State(LPE) Change";
7270 else
7271 ds = "Loop State(LPB) Change";
7272 break;
7273 case MPI_EVENT_LOGOUT:
7274 ds = "Logout";
7275 break;
7276 case MPI_EVENT_EVENT_CHANGE:
7277 if (evData0)
7278 ds = "Events ON";
7279 else
7280 ds = "Events OFF";
7281 break;
7282 case MPI_EVENT_INTEGRATED_RAID:
7283 {
7284 u8 ReasonCode = (u8)(evData0 >> 16);
7285 switch (ReasonCode) {
7286 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7287 ds = "Integrated Raid: Volume Created";
7288 break;
7289 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7290 ds = "Integrated Raid: Volume Deleted";
7291 break;
7292 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7293 ds = "Integrated Raid: Volume Settings Changed";
7294 break;
7295 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7296 ds = "Integrated Raid: Volume Status Changed";
7297 break;
7298 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7299 ds = "Integrated Raid: Volume Physdisk Changed";
7300 break;
7301 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7302 ds = "Integrated Raid: Physdisk Created";
7303 break;
7304 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7305 ds = "Integrated Raid: Physdisk Deleted";
7306 break;
7307 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7308 ds = "Integrated Raid: Physdisk Settings Changed";
7309 break;
7310 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7311 ds = "Integrated Raid: Physdisk Status Changed";
7312 break;
7313 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7314 ds = "Integrated Raid: Domain Validation Needed";
7315 break;
7316 case MPI_EVENT_RAID_RC_SMART_DATA :
7317 ds = "Integrated Raid; Smart Data";
7318 break;
7319 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7320 ds = "Integrated Raid: Replace Action Started";
7321 break;
7322 default:
7323 ds = "Integrated Raid";
7324 break;
7325 }
7326 break;
7327 }
7328 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7329 ds = "SCSI Device Status Change";
7330 break;
7331 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7332 {
7333 u8 id = (u8)(evData0);
7334 u8 channel = (u8)(evData0 >> 8);
7335 u8 ReasonCode = (u8)(evData0 >> 16);
7336 switch (ReasonCode) {
7337 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7338 snprintf(evStr, EVENT_DESCR_STR_SZ,
7339 "SAS Device Status Change: Added: "
7340 "id=%d channel=%d", id, channel);
7341 break;
7342 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7343 snprintf(evStr, EVENT_DESCR_STR_SZ,
7344 "SAS Device Status Change: Deleted: "
7345 "id=%d channel=%d", id, channel);
7346 break;
7347 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7348 snprintf(evStr, EVENT_DESCR_STR_SZ,
7349 "SAS Device Status Change: SMART Data: "
7350 "id=%d channel=%d", id, channel);
7351 break;
7352 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7353 snprintf(evStr, EVENT_DESCR_STR_SZ,
7354 "SAS Device Status Change: No Persistency: "
7355 "id=%d channel=%d", id, channel);
7356 break;
7357 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7358 snprintf(evStr, EVENT_DESCR_STR_SZ,
7359 "SAS Device Status Change: Unsupported Device "
7360 "Discovered : id=%d channel=%d", id, channel);
7361 break;
7362 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7363 snprintf(evStr, EVENT_DESCR_STR_SZ,
7364 "SAS Device Status Change: Internal Device "
7365 "Reset : id=%d channel=%d", id, channel);
7366 break;
7367 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7368 snprintf(evStr, EVENT_DESCR_STR_SZ,
7369 "SAS Device Status Change: Internal Task "
7370 "Abort : id=%d channel=%d", id, channel);
7371 break;
7372 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7373 snprintf(evStr, EVENT_DESCR_STR_SZ,
7374 "SAS Device Status Change: Internal Abort "
7375 "Task Set : id=%d channel=%d", id, channel);
7376 break;
7377 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7378 snprintf(evStr, EVENT_DESCR_STR_SZ,
7379 "SAS Device Status Change: Internal Clear "
7380 "Task Set : id=%d channel=%d", id, channel);
7381 break;
7382 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7383 snprintf(evStr, EVENT_DESCR_STR_SZ,
7384 "SAS Device Status Change: Internal Query "
7385 "Task : id=%d channel=%d", id, channel);
7386 break;
7387 default:
7388 snprintf(evStr, EVENT_DESCR_STR_SZ,
7389 "SAS Device Status Change: Unknown: "
7390 "id=%d channel=%d", id, channel);
7391 break;
7392 }
7393 break;
7394 }
7395 case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7396 ds = "Bus Timer Expired";
7397 break;
7398 case MPI_EVENT_QUEUE_FULL:
7399 {
7400 u16 curr_depth = (u16)(evData0 >> 16);
7401 u8 channel = (u8)(evData0 >> 8);
7402 u8 id = (u8)(evData0);
7403
7404 snprintf(evStr, EVENT_DESCR_STR_SZ,
7405 "Queue Full: channel=%d id=%d depth=%d",
7406 channel, id, curr_depth);
7407 break;
7408 }
7409 case MPI_EVENT_SAS_SES:
7410 ds = "SAS SES Event";
7411 break;
7412 case MPI_EVENT_PERSISTENT_TABLE_FULL:
7413 ds = "Persistent Table Full";
7414 break;
7415 case MPI_EVENT_SAS_PHY_LINK_STATUS:
7416 {
7417 u8 LinkRates = (u8)(evData0 >> 8);
7418 u8 PhyNumber = (u8)(evData0);
7419 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7420 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7421 switch (LinkRates) {
7422 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7423 snprintf(evStr, EVENT_DESCR_STR_SZ,
7424 "SAS PHY Link Status: Phy=%d:"
7425 " Rate Unknown",PhyNumber);
7426 break;
7427 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7428 snprintf(evStr, EVENT_DESCR_STR_SZ,
7429 "SAS PHY Link Status: Phy=%d:"
7430 " Phy Disabled",PhyNumber);
7431 break;
7432 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7433 snprintf(evStr, EVENT_DESCR_STR_SZ,
7434 "SAS PHY Link Status: Phy=%d:"
7435 " Failed Speed Nego",PhyNumber);
7436 break;
7437 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7438 snprintf(evStr, EVENT_DESCR_STR_SZ,
7439 "SAS PHY Link Status: Phy=%d:"
7440 " Sata OOB Completed",PhyNumber);
7441 break;
7442 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7443 snprintf(evStr, EVENT_DESCR_STR_SZ,
7444 "SAS PHY Link Status: Phy=%d:"
7445 " Rate 1.5 Gbps",PhyNumber);
7446 break;
7447 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7448 snprintf(evStr, EVENT_DESCR_STR_SZ,
7449 "SAS PHY Link Status: Phy=%d:"
7450 " Rate 3.0 Gbps", PhyNumber);
7451 break;
7452 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7453 snprintf(evStr, EVENT_DESCR_STR_SZ,
7454 "SAS PHY Link Status: Phy=%d:"
7455 " Rate 6.0 Gbps", PhyNumber);
7456 break;
7457 default:
7458 snprintf(evStr, EVENT_DESCR_STR_SZ,
7459 "SAS PHY Link Status: Phy=%d", PhyNumber);
7460 break;
7461 }
7462 break;
7463 }
7464 case MPI_EVENT_SAS_DISCOVERY_ERROR:
7465 ds = "SAS Discovery Error";
7466 break;
7467 case MPI_EVENT_IR_RESYNC_UPDATE:
7468 {
7469 u8 resync_complete = (u8)(evData0 >> 16);
7470 snprintf(evStr, EVENT_DESCR_STR_SZ,
7471 "IR Resync Update: Complete = %d:",resync_complete);
7472 break;
7473 }
7474 case MPI_EVENT_IR2:
7475 {
7476 u8 id = (u8)(evData0);
7477 u8 channel = (u8)(evData0 >> 8);
7478 u8 phys_num = (u8)(evData0 >> 24);
7479 u8 ReasonCode = (u8)(evData0 >> 16);
7480
7481 switch (ReasonCode) {
7482 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7483 snprintf(evStr, EVENT_DESCR_STR_SZ,
7484 "IR2: LD State Changed: "
7485 "id=%d channel=%d phys_num=%d",
7486 id, channel, phys_num);
7487 break;
7488 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7489 snprintf(evStr, EVENT_DESCR_STR_SZ,
7490 "IR2: PD State Changed "
7491 "id=%d channel=%d phys_num=%d",
7492 id, channel, phys_num);
7493 break;
7494 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7495 snprintf(evStr, EVENT_DESCR_STR_SZ,
7496 "IR2: Bad Block Table Full: "
7497 "id=%d channel=%d phys_num=%d",
7498 id, channel, phys_num);
7499 break;
7500 case MPI_EVENT_IR2_RC_PD_INSERTED:
7501 snprintf(evStr, EVENT_DESCR_STR_SZ,
7502 "IR2: PD Inserted: "
7503 "id=%d channel=%d phys_num=%d",
7504 id, channel, phys_num);
7505 break;
7506 case MPI_EVENT_IR2_RC_PD_REMOVED:
7507 snprintf(evStr, EVENT_DESCR_STR_SZ,
7508 "IR2: PD Removed: "
7509 "id=%d channel=%d phys_num=%d",
7510 id, channel, phys_num);
7511 break;
7512 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7513 snprintf(evStr, EVENT_DESCR_STR_SZ,
7514 "IR2: Foreign CFG Detected: "
7515 "id=%d channel=%d phys_num=%d",
7516 id, channel, phys_num);
7517 break;
7518 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7519 snprintf(evStr, EVENT_DESCR_STR_SZ,
7520 "IR2: Rebuild Medium Error: "
7521 "id=%d channel=%d phys_num=%d",
7522 id, channel, phys_num);
7523 break;
7524 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7525 snprintf(evStr, EVENT_DESCR_STR_SZ,
7526 "IR2: Dual Port Added: "
7527 "id=%d channel=%d phys_num=%d",
7528 id, channel, phys_num);
7529 break;
7530 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7531 snprintf(evStr, EVENT_DESCR_STR_SZ,
7532 "IR2: Dual Port Removed: "
7533 "id=%d channel=%d phys_num=%d",
7534 id, channel, phys_num);
7535 break;
7536 default:
7537 ds = "IR2";
7538 break;
7539 }
7540 break;
7541 }
7542 case MPI_EVENT_SAS_DISCOVERY:
7543 {
7544 if (evData0)
7545 ds = "SAS Discovery: Start";
7546 else
7547 ds = "SAS Discovery: Stop";
7548 break;
7549 }
7550 case MPI_EVENT_LOG_ENTRY_ADDED:
7551 ds = "SAS Log Entry Added";
7552 break;
7553
7554 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7555 {
7556 u8 phy_num = (u8)(evData0);
7557 u8 port_num = (u8)(evData0 >> 8);
7558 u8 port_width = (u8)(evData0 >> 16);
7559 u8 primitive = (u8)(evData0 >> 24);
7560 snprintf(evStr, EVENT_DESCR_STR_SZ,
7561 "SAS Broadcast Primitive: phy=%d port=%d "
7562 "width=%d primitive=0x%02x",
7563 phy_num, port_num, port_width, primitive);
7564 break;
7565 }
7566
7567 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7568 {
7569 u8 reason = (u8)(evData0);
7570
7571 switch (reason) {
7572 case MPI_EVENT_SAS_INIT_RC_ADDED:
7573 ds = "SAS Initiator Status Change: Added";
7574 break;
7575 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7576 ds = "SAS Initiator Status Change: Deleted";
7577 break;
7578 default:
7579 ds = "SAS Initiator Status Change";
7580 break;
7581 }
7582 break;
7583 }
7584
7585 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7586 {
7587 u8 max_init = (u8)(evData0);
7588 u8 current_init = (u8)(evData0 >> 8);
7589
7590 snprintf(evStr, EVENT_DESCR_STR_SZ,
7591 "SAS Initiator Device Table Overflow: max initiators=%02d "
7592 "current initiators=%02d",
7593 max_init, current_init);
7594 break;
7595 }
7596 case MPI_EVENT_SAS_SMP_ERROR:
7597 {
7598 u8 status = (u8)(evData0);
7599 u8 port_num = (u8)(evData0 >> 8);
7600 u8 result = (u8)(evData0 >> 16);
7601
7602 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7603 snprintf(evStr, EVENT_DESCR_STR_SZ,
7604 "SAS SMP Error: port=%d result=0x%02x",
7605 port_num, result);
7606 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7607 snprintf(evStr, EVENT_DESCR_STR_SZ,
7608 "SAS SMP Error: port=%d : CRC Error",
7609 port_num);
7610 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7611 snprintf(evStr, EVENT_DESCR_STR_SZ,
7612 "SAS SMP Error: port=%d : Timeout",
7613 port_num);
7614 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7615 snprintf(evStr, EVENT_DESCR_STR_SZ,
7616 "SAS SMP Error: port=%d : No Destination",
7617 port_num);
7618 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7619 snprintf(evStr, EVENT_DESCR_STR_SZ,
7620 "SAS SMP Error: port=%d : Bad Destination",
7621 port_num);
7622 else
7623 snprintf(evStr, EVENT_DESCR_STR_SZ,
7624 "SAS SMP Error: port=%d : status=0x%02x",
7625 port_num, status);
7626 break;
7627 }
7628
7629 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7630 {
7631 u8 reason = (u8)(evData0);
7632
7633 switch (reason) {
7634 case MPI_EVENT_SAS_EXP_RC_ADDED:
7635 ds = "Expander Status Change: Added";
7636 break;
7637 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7638 ds = "Expander Status Change: Deleted";
7639 break;
7640 default:
7641 ds = "Expander Status Change";
7642 break;
7643 }
7644 break;
7645 }
7646
7647 /*
7648 * MPT base "custom" events may be added here...
7649 */
7650 default:
7651 ds = "Unknown";
7652 break;
7653 }
7654 if (ds)
7655 strlcpy(evStr, ds, EVENT_DESCR_STR_SZ);
7656
7657
7658 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7659 "MPT event:(%02Xh) : %s\n",
7660 ioc->name, event, evStr));
7661
7662 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7663 ": Event data:\n"));
7664 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7665 devtverboseprintk(ioc, printk(" %08x",
7666 le32_to_cpu(pEventReply->Data[ii])));
7667 devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7668}
7669#endif
7670/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7671/**
7672 * ProcessEventNotification - Route EventNotificationReply to all event handlers
7673 * @ioc: Pointer to MPT_ADAPTER structure
7674 * @pEventReply: Pointer to EventNotification reply frame
7675 * @evHandlers: Pointer to integer, number of event handlers
7676 *
7677 * Routes a received EventNotificationReply to all currently registered
7678 * event handlers.
7679 * Returns sum of event handlers return values.
7680 */
7681static int
7682ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7683{
7684 u16 evDataLen;
7685 u32 evData0 = 0;
7686 int ii;
7687 u8 cb_idx;
7688 int r = 0;
7689 int handlers = 0;
7690 u8 event;
7691
7692 /*
7693 * Do platform normalization of values
7694 */
7695 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7696 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7697 if (evDataLen) {
7698 evData0 = le32_to_cpu(pEventReply->Data[0]);
7699 }
7700
7701#ifdef CONFIG_FUSION_LOGGING
7702 if (evDataLen)
7703 mpt_display_event_info(ioc, pEventReply);
7704#endif
7705
7706 /*
7707 * Do general / base driver event processing
7708 */
7709 switch(event) {
7710 case MPI_EVENT_EVENT_CHANGE: /* 0A */
7711 if (evDataLen) {
7712 u8 evState = evData0 & 0xFF;
7713
7714 /* CHECKME! What if evState unexpectedly says OFF (0)? */
7715
7716 /* Update EventState field in cached IocFacts */
7717 if (ioc->facts.Function) {
7718 ioc->facts.EventState = evState;
7719 }
7720 }
7721 break;
7722 case MPI_EVENT_INTEGRATED_RAID:
7723 mptbase_raid_process_event_data(ioc,
7724 (MpiEventDataRaid_t *)pEventReply->Data);
7725 break;
7726 default:
7727 break;
7728 }
7729
7730 /*
7731 * Should this event be logged? Events are written sequentially.
7732 * When buffer is full, start again at the top.
7733 */
7734 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7735 int idx;
7736
7737 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7738
7739 ioc->events[idx].event = event;
7740 ioc->events[idx].eventContext = ioc->eventContext;
7741
7742 for (ii = 0; ii < 2; ii++) {
7743 if (ii < evDataLen)
7744 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7745 else
7746 ioc->events[idx].data[ii] = 0;
7747 }
7748
7749 ioc->eventContext++;
7750 }
7751
7752
7753 /*
7754 * Call each currently registered protocol event handler.
7755 */
7756 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7757 if (MptEvHandlers[cb_idx]) {
7758 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7759 "Routing Event to event handler #%d\n",
7760 ioc->name, cb_idx));
7761 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7762 handlers++;
7763 }
7764 }
7765 /* FIXME? Examine results here? */
7766
7767 /*
7768 * If needed, send (a single) EventAck.
7769 */
7770 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7771 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7772 "EventAck required\n",ioc->name));
7773 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7774 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7775 ioc->name, ii));
7776 }
7777 }
7778
7779 *evHandlers = handlers;
7780 return r;
7781}
7782
7783/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7784/**
7785 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7786 * @ioc: Pointer to MPT_ADAPTER structure
7787 * @log_info: U32 LogInfo reply word from the IOC
7788 *
7789 * Refer to lsi/mpi_log_fc.h.
7790 */
7791static void
7792mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7793{
7794 char *desc = "unknown";
7795
7796 switch (log_info & 0xFF000000) {
7797 case MPI_IOCLOGINFO_FC_INIT_BASE:
7798 desc = "FCP Initiator";
7799 break;
7800 case MPI_IOCLOGINFO_FC_TARGET_BASE:
7801 desc = "FCP Target";
7802 break;
7803 case MPI_IOCLOGINFO_FC_LAN_BASE:
7804 desc = "LAN";
7805 break;
7806 case MPI_IOCLOGINFO_FC_MSG_BASE:
7807 desc = "MPI Message Layer";
7808 break;
7809 case MPI_IOCLOGINFO_FC_LINK_BASE:
7810 desc = "FC Link";
7811 break;
7812 case MPI_IOCLOGINFO_FC_CTX_BASE:
7813 desc = "Context Manager";
7814 break;
7815 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7816 desc = "Invalid Field Offset";
7817 break;
7818 case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7819 desc = "State Change Info";
7820 break;
7821 }
7822
7823 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7824 ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7825}
7826
7827/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7828/**
7829 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7830 * @ioc: Pointer to MPT_ADAPTER structure
7831 * @log_info: U32 LogInfo word from the IOC
7832 *
7833 * Refer to lsi/sp_log.h.
7834 */
7835static void
7836mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7837{
7838 u32 info = log_info & 0x00FF0000;
7839 char *desc = "unknown";
7840
7841 switch (info) {
7842 case 0x00010000:
7843 desc = "bug! MID not found";
7844 break;
7845
7846 case 0x00020000:
7847 desc = "Parity Error";
7848 break;
7849
7850 case 0x00030000:
7851 desc = "ASYNC Outbound Overrun";
7852 break;
7853
7854 case 0x00040000:
7855 desc = "SYNC Offset Error";
7856 break;
7857
7858 case 0x00050000:
7859 desc = "BM Change";
7860 break;
7861
7862 case 0x00060000:
7863 desc = "Msg In Overflow";
7864 break;
7865
7866 case 0x00070000:
7867 desc = "DMA Error";
7868 break;
7869
7870 case 0x00080000:
7871 desc = "Outbound DMA Overrun";
7872 break;
7873
7874 case 0x00090000:
7875 desc = "Task Management";
7876 break;
7877
7878 case 0x000A0000:
7879 desc = "Device Problem";
7880 break;
7881
7882 case 0x000B0000:
7883 desc = "Invalid Phase Change";
7884 break;
7885
7886 case 0x000C0000:
7887 desc = "Untagged Table Size";
7888 break;
7889
7890 }
7891
7892 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7893}
7894
7895/* strings for sas loginfo */
7896 static char *originator_str[] = {
7897 "IOP", /* 00h */
7898 "PL", /* 01h */
7899 "IR" /* 02h */
7900 };
7901 static char *iop_code_str[] = {
7902 NULL, /* 00h */
7903 "Invalid SAS Address", /* 01h */
7904 NULL, /* 02h */
7905 "Invalid Page", /* 03h */
7906 "Diag Message Error", /* 04h */
7907 "Task Terminated", /* 05h */
7908 "Enclosure Management", /* 06h */
7909 "Target Mode" /* 07h */
7910 };
7911 static char *pl_code_str[] = {
7912 NULL, /* 00h */
7913 "Open Failure", /* 01h */
7914 "Invalid Scatter Gather List", /* 02h */
7915 "Wrong Relative Offset or Frame Length", /* 03h */
7916 "Frame Transfer Error", /* 04h */
7917 "Transmit Frame Connected Low", /* 05h */
7918 "SATA Non-NCQ RW Error Bit Set", /* 06h */
7919 "SATA Read Log Receive Data Error", /* 07h */
7920 "SATA NCQ Fail All Commands After Error", /* 08h */
7921 "SATA Error in Receive Set Device Bit FIS", /* 09h */
7922 "Receive Frame Invalid Message", /* 0Ah */
7923 "Receive Context Message Valid Error", /* 0Bh */
7924 "Receive Frame Current Frame Error", /* 0Ch */
7925 "SATA Link Down", /* 0Dh */
7926 "Discovery SATA Init W IOS", /* 0Eh */
7927 "Config Invalid Page", /* 0Fh */
7928 "Discovery SATA Init Timeout", /* 10h */
7929 "Reset", /* 11h */
7930 "Abort", /* 12h */
7931 "IO Not Yet Executed", /* 13h */
7932 "IO Executed", /* 14h */
7933 "Persistent Reservation Out Not Affiliation "
7934 "Owner", /* 15h */
7935 "Open Transmit DMA Abort", /* 16h */
7936 "IO Device Missing Delay Retry", /* 17h */
7937 "IO Cancelled Due to Receive Error", /* 18h */
7938 NULL, /* 19h */
7939 NULL, /* 1Ah */
7940 NULL, /* 1Bh */
7941 NULL, /* 1Ch */
7942 NULL, /* 1Dh */
7943 NULL, /* 1Eh */
7944 NULL, /* 1Fh */
7945 "Enclosure Management" /* 20h */
7946 };
7947 static char *ir_code_str[] = {
7948 "Raid Action Error", /* 00h */
7949 NULL, /* 00h */
7950 NULL, /* 01h */
7951 NULL, /* 02h */
7952 NULL, /* 03h */
7953 NULL, /* 04h */
7954 NULL, /* 05h */
7955 NULL, /* 06h */
7956 NULL /* 07h */
7957 };
7958 static char *raid_sub_code_str[] = {
7959 NULL, /* 00h */
7960 "Volume Creation Failed: Data Passed too "
7961 "Large", /* 01h */
7962 "Volume Creation Failed: Duplicate Volumes "
7963 "Attempted", /* 02h */
7964 "Volume Creation Failed: Max Number "
7965 "Supported Volumes Exceeded", /* 03h */
7966 "Volume Creation Failed: DMA Error", /* 04h */
7967 "Volume Creation Failed: Invalid Volume Type", /* 05h */
7968 "Volume Creation Failed: Error Reading "
7969 "MFG Page 4", /* 06h */
7970 "Volume Creation Failed: Creating Internal "
7971 "Structures", /* 07h */
7972 NULL, /* 08h */
7973 NULL, /* 09h */
7974 NULL, /* 0Ah */
7975 NULL, /* 0Bh */
7976 NULL, /* 0Ch */
7977 NULL, /* 0Dh */
7978 NULL, /* 0Eh */
7979 NULL, /* 0Fh */
7980 "Activation failed: Already Active Volume", /* 10h */
7981 "Activation failed: Unsupported Volume Type", /* 11h */
7982 "Activation failed: Too Many Active Volumes", /* 12h */
7983 "Activation failed: Volume ID in Use", /* 13h */
7984 "Activation failed: Reported Failure", /* 14h */
7985 "Activation failed: Importing a Volume", /* 15h */
7986 NULL, /* 16h */
7987 NULL, /* 17h */
7988 NULL, /* 18h */
7989 NULL, /* 19h */
7990 NULL, /* 1Ah */
7991 NULL, /* 1Bh */
7992 NULL, /* 1Ch */
7993 NULL, /* 1Dh */
7994 NULL, /* 1Eh */
7995 NULL, /* 1Fh */
7996 "Phys Disk failed: Too Many Phys Disks", /* 20h */
7997 "Phys Disk failed: Data Passed too Large", /* 21h */
7998 "Phys Disk failed: DMA Error", /* 22h */
7999 "Phys Disk failed: Invalid <channel:id>", /* 23h */
8000 "Phys Disk failed: Creating Phys Disk Config "
8001 "Page", /* 24h */
8002 NULL, /* 25h */
8003 NULL, /* 26h */
8004 NULL, /* 27h */
8005 NULL, /* 28h */
8006 NULL, /* 29h */
8007 NULL, /* 2Ah */
8008 NULL, /* 2Bh */
8009 NULL, /* 2Ch */
8010 NULL, /* 2Dh */
8011 NULL, /* 2Eh */
8012 NULL, /* 2Fh */
8013 "Compatibility Error: IR Disabled", /* 30h */
8014 "Compatibility Error: Inquiry Command Failed", /* 31h */
8015 "Compatibility Error: Device not Direct Access "
8016 "Device ", /* 32h */
8017 "Compatibility Error: Removable Device Found", /* 33h */
8018 "Compatibility Error: Device SCSI Version not "
8019 "2 or Higher", /* 34h */
8020 "Compatibility Error: SATA Device, 48 BIT LBA "
8021 "not Supported", /* 35h */
8022 "Compatibility Error: Device doesn't have "
8023 "512 Byte Block Sizes", /* 36h */
8024 "Compatibility Error: Volume Type Check Failed", /* 37h */
8025 "Compatibility Error: Volume Type is "
8026 "Unsupported by FW", /* 38h */
8027 "Compatibility Error: Disk Drive too Small for "
8028 "use in Volume", /* 39h */
8029 "Compatibility Error: Phys Disk for Create "
8030 "Volume not Found", /* 3Ah */
8031 "Compatibility Error: Too Many or too Few "
8032 "Disks for Volume Type", /* 3Bh */
8033 "Compatibility Error: Disk stripe Sizes "
8034 "Must be 64KB", /* 3Ch */
8035 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8036 };
8037
8038/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8039/**
8040 * mpt_sas_log_info - Log information returned from SAS IOC.
8041 * @ioc: Pointer to MPT_ADAPTER structure
8042 * @log_info: U32 LogInfo reply word from the IOC
8043 * @cb_idx: callback function's handle
8044 *
8045 * Refer to lsi/mpi_log_sas.h.
8046 **/
8047static void
8048mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8049{
8050 union loginfo_type {
8051 u32 loginfo;
8052 struct {
8053 u32 subcode:16;
8054 u32 code:8;
8055 u32 originator:4;
8056 u32 bus_type:4;
8057 } dw;
8058 };
8059 union loginfo_type sas_loginfo;
8060 char *originator_desc = NULL;
8061 char *code_desc = NULL;
8062 char *sub_code_desc = NULL;
8063
8064 sas_loginfo.loginfo = log_info;
8065 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8066 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8067 return;
8068
8069 originator_desc = originator_str[sas_loginfo.dw.originator];
8070
8071 switch (sas_loginfo.dw.originator) {
8072
8073 case 0: /* IOP */
8074 if (sas_loginfo.dw.code <
8075 ARRAY_SIZE(iop_code_str))
8076 code_desc = iop_code_str[sas_loginfo.dw.code];
8077 break;
8078 case 1: /* PL */
8079 if (sas_loginfo.dw.code <
8080 ARRAY_SIZE(pl_code_str))
8081 code_desc = pl_code_str[sas_loginfo.dw.code];
8082 break;
8083 case 2: /* IR */
8084 if (sas_loginfo.dw.code >=
8085 ARRAY_SIZE(ir_code_str))
8086 break;
8087 code_desc = ir_code_str[sas_loginfo.dw.code];
8088 if (sas_loginfo.dw.subcode >=
8089 ARRAY_SIZE(raid_sub_code_str))
8090 break;
8091 if (sas_loginfo.dw.code == 0)
8092 sub_code_desc =
8093 raid_sub_code_str[sas_loginfo.dw.subcode];
8094 break;
8095 default:
8096 return;
8097 }
8098
8099 if (sub_code_desc != NULL)
8100 printk(MYIOC_s_INFO_FMT
8101 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8102 " SubCode={%s} cb_idx %s\n",
8103 ioc->name, log_info, originator_desc, code_desc,
8104 sub_code_desc, MptCallbacksName[cb_idx]);
8105 else if (code_desc != NULL)
8106 printk(MYIOC_s_INFO_FMT
8107 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8108 " SubCode(0x%04x) cb_idx %s\n",
8109 ioc->name, log_info, originator_desc, code_desc,
8110 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8111 else
8112 printk(MYIOC_s_INFO_FMT
8113 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8114 " SubCode(0x%04x) cb_idx %s\n",
8115 ioc->name, log_info, originator_desc,
8116 sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8117 MptCallbacksName[cb_idx]);
8118}
8119
8120/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8121/**
8122 * mpt_iocstatus_info_config - IOCSTATUS information for config pages
8123 * @ioc: Pointer to MPT_ADAPTER structure
8124 * @ioc_status: U32 IOCStatus word from IOC
8125 * @mf: Pointer to MPT request frame
8126 *
8127 * Refer to lsi/mpi.h.
8128 **/
8129static void
8130mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8131{
8132 Config_t *pReq = (Config_t *)mf;
8133 char extend_desc[EVENT_DESCR_STR_SZ];
8134 char *desc = NULL;
8135 u32 form;
8136 u8 page_type;
8137
8138 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8139 page_type = pReq->ExtPageType;
8140 else
8141 page_type = pReq->Header.PageType;
8142
8143 /*
8144 * ignore invalid page messages for GET_NEXT_HANDLE
8145 */
8146 form = le32_to_cpu(pReq->PageAddress);
8147 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8148 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8149 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8150 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8151 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8152 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8153 return;
8154 }
8155 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8156 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8157 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8158 return;
8159 }
8160
8161 snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8162 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8163 page_type, pReq->Header.PageNumber, pReq->Action, form);
8164
8165 switch (ioc_status) {
8166
8167 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8168 desc = "Config Page Invalid Action";
8169 break;
8170
8171 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8172 desc = "Config Page Invalid Type";
8173 break;
8174
8175 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8176 desc = "Config Page Invalid Page";
8177 break;
8178
8179 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8180 desc = "Config Page Invalid Data";
8181 break;
8182
8183 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8184 desc = "Config Page No Defaults";
8185 break;
8186
8187 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8188 desc = "Config Page Can't Commit";
8189 break;
8190 }
8191
8192 if (!desc)
8193 return;
8194
8195 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8196 ioc->name, ioc_status, desc, extend_desc));
8197}
8198
8199/**
8200 * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8201 * @ioc: Pointer to MPT_ADAPTER structure
8202 * @ioc_status: U32 IOCStatus word from IOC
8203 * @mf: Pointer to MPT request frame
8204 *
8205 * Refer to lsi/mpi.h.
8206 **/
8207static void
8208mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8209{
8210 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8211 char *desc = NULL;
8212
8213 switch (status) {
8214
8215/****************************************************************************/
8216/* Common IOCStatus values for all replies */
8217/****************************************************************************/
8218
8219 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8220 desc = "Invalid Function";
8221 break;
8222
8223 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8224 desc = "Busy";
8225 break;
8226
8227 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8228 desc = "Invalid SGL";
8229 break;
8230
8231 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8232 desc = "Internal Error";
8233 break;
8234
8235 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8236 desc = "Reserved";
8237 break;
8238
8239 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8240 desc = "Insufficient Resources";
8241 break;
8242
8243 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8244 desc = "Invalid Field";
8245 break;
8246
8247 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8248 desc = "Invalid State";
8249 break;
8250
8251/****************************************************************************/
8252/* Config IOCStatus values */
8253/****************************************************************************/
8254
8255 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8256 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8257 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8258 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8259 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8260 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8261 mpt_iocstatus_info_config(ioc, status, mf);
8262 break;
8263
8264/****************************************************************************/
8265/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8266/* */
8267/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8268/* */
8269/****************************************************************************/
8270
8271 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8272 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8273 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8274 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8275 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8276 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8277 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8278 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8279 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8280 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8281 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8282 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8283 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8284 break;
8285
8286/****************************************************************************/
8287/* SCSI Target values */
8288/****************************************************************************/
8289
8290 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8291 desc = "Target: Priority IO";
8292 break;
8293
8294 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8295 desc = "Target: Invalid Port";
8296 break;
8297
8298 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8299 desc = "Target Invalid IO Index:";
8300 break;
8301
8302 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8303 desc = "Target: Aborted";
8304 break;
8305
8306 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8307 desc = "Target: No Conn Retryable";
8308 break;
8309
8310 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8311 desc = "Target: No Connection";
8312 break;
8313
8314 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8315 desc = "Target: Transfer Count Mismatch";
8316 break;
8317
8318 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8319 desc = "Target: STS Data not Sent";
8320 break;
8321
8322 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8323 desc = "Target: Data Offset Error";
8324 break;
8325
8326 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8327 desc = "Target: Too Much Write Data";
8328 break;
8329
8330 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8331 desc = "Target: IU Too Short";
8332 break;
8333
8334 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8335 desc = "Target: ACK NAK Timeout";
8336 break;
8337
8338 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8339 desc = "Target: Nak Received";
8340 break;
8341
8342/****************************************************************************/
8343/* Fibre Channel Direct Access values */
8344/****************************************************************************/
8345
8346 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8347 desc = "FC: Aborted";
8348 break;
8349
8350 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8351 desc = "FC: RX ID Invalid";
8352 break;
8353
8354 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8355 desc = "FC: DID Invalid";
8356 break;
8357
8358 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8359 desc = "FC: Node Logged Out";
8360 break;
8361
8362 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8363 desc = "FC: Exchange Canceled";
8364 break;
8365
8366/****************************************************************************/
8367/* LAN values */
8368/****************************************************************************/
8369
8370 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8371 desc = "LAN: Device not Found";
8372 break;
8373
8374 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8375 desc = "LAN: Device Failure";
8376 break;
8377
8378 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8379 desc = "LAN: Transmit Error";
8380 break;
8381
8382 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8383 desc = "LAN: Transmit Aborted";
8384 break;
8385
8386 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8387 desc = "LAN: Receive Error";
8388 break;
8389
8390 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8391 desc = "LAN: Receive Aborted";
8392 break;
8393
8394 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8395 desc = "LAN: Partial Packet";
8396 break;
8397
8398 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8399 desc = "LAN: Canceled";
8400 break;
8401
8402/****************************************************************************/
8403/* Serial Attached SCSI values */
8404/****************************************************************************/
8405
8406 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8407 desc = "SAS: SMP Request Failed";
8408 break;
8409
8410 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8411 desc = "SAS: SMP Data Overrun";
8412 break;
8413
8414 default:
8415 desc = "Others";
8416 break;
8417 }
8418
8419 if (!desc)
8420 return;
8421
8422 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8423 ioc->name, status, desc));
8424}
8425
8426/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8427EXPORT_SYMBOL(mpt_attach);
8428EXPORT_SYMBOL(mpt_detach);
8429#ifdef CONFIG_PM
8430EXPORT_SYMBOL(mpt_resume);
8431EXPORT_SYMBOL(mpt_suspend);
8432#endif
8433EXPORT_SYMBOL(ioc_list);
8434EXPORT_SYMBOL(mpt_register);
8435EXPORT_SYMBOL(mpt_deregister);
8436EXPORT_SYMBOL(mpt_event_register);
8437EXPORT_SYMBOL(mpt_event_deregister);
8438EXPORT_SYMBOL(mpt_reset_register);
8439EXPORT_SYMBOL(mpt_reset_deregister);
8440EXPORT_SYMBOL(mpt_device_driver_register);
8441EXPORT_SYMBOL(mpt_device_driver_deregister);
8442EXPORT_SYMBOL(mpt_get_msg_frame);
8443EXPORT_SYMBOL(mpt_put_msg_frame);
8444EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8445EXPORT_SYMBOL(mpt_free_msg_frame);
8446EXPORT_SYMBOL(mpt_send_handshake_request);
8447EXPORT_SYMBOL(mpt_verify_adapter);
8448EXPORT_SYMBOL(mpt_GetIocState);
8449EXPORT_SYMBOL(mpt_print_ioc_summary);
8450EXPORT_SYMBOL(mpt_HardResetHandler);
8451EXPORT_SYMBOL(mpt_config);
8452EXPORT_SYMBOL(mpt_findImVolumes);
8453EXPORT_SYMBOL(mpt_alloc_fw_memory);
8454EXPORT_SYMBOL(mpt_free_fw_memory);
8455EXPORT_SYMBOL(mptbase_sas_persist_operation);
8456EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8457
8458/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8459/**
8460 * fusion_init - Fusion MPT base driver initialization routine.
8461 *
8462 * Returns 0 for success, non-zero for failure.
8463 */
8464static int __init
8465fusion_init(void)
8466{
8467 u8 cb_idx;
8468
8469 show_mptmod_ver(my_NAME, my_VERSION);
8470 printk(KERN_INFO COPYRIGHT "\n");
8471
8472 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8473 MptCallbacks[cb_idx] = NULL;
8474 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8475 MptEvHandlers[cb_idx] = NULL;
8476 MptResetHandlers[cb_idx] = NULL;
8477 }
8478
8479 /* Register ourselves (mptbase) in order to facilitate
8480 * EventNotification handling.
8481 */
8482 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8483 "mptbase_reply");
8484
8485 /* Register for hard reset handling callbacks.
8486 */
8487 mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8488
8489#ifdef CONFIG_PROC_FS
8490 (void) procmpt_create();
8491#endif
8492 return 0;
8493}
8494
8495/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8496/**
8497 * fusion_exit - Perform driver unload cleanup.
8498 *
8499 * This routine frees all resources associated with each MPT adapter
8500 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
8501 */
8502static void __exit
8503fusion_exit(void)
8504{
8505
8506 mpt_reset_deregister(mpt_base_index);
8507
8508#ifdef CONFIG_PROC_FS
8509 procmpt_destroy();
8510#endif
8511}
8512
8513module_init(fusion_init);
8514module_exit(fusion_exit);