Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
4 */
5
6#include <linux/kernel.h>
7#include <linux/mm.h>
8#include <linux/memblock.h>
9#ifdef CONFIG_BLK_DEV_INITRD
10#include <linux/initrd.h>
11#endif
12#include <linux/of_fdt.h>
13#include <linux/swap.h>
14#include <linux/module.h>
15#include <linux/highmem.h>
16#include <asm/page.h>
17#include <asm/sections.h>
18#include <asm/arcregs.h>
19
20pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
21char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
22EXPORT_SYMBOL(empty_zero_page);
23
24static const unsigned long low_mem_start = CONFIG_LINUX_RAM_BASE;
25static unsigned long low_mem_sz;
26
27#ifdef CONFIG_HIGHMEM
28static unsigned long min_high_pfn, max_high_pfn;
29static phys_addr_t high_mem_start;
30static phys_addr_t high_mem_sz;
31#endif
32
33#ifdef CONFIG_DISCONTIGMEM
34struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
35EXPORT_SYMBOL(node_data);
36#endif
37
38long __init arc_get_mem_sz(void)
39{
40 return low_mem_sz;
41}
42
43/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
44static int __init setup_mem_sz(char *str)
45{
46 low_mem_sz = memparse(str, NULL) & PAGE_MASK;
47
48 /* early console might not be setup yet - it will show up later */
49 pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
50
51 return 0;
52}
53early_param("mem", setup_mem_sz);
54
55void __init early_init_dt_add_memory_arch(u64 base, u64 size)
56{
57 int in_use = 0;
58
59 if (!low_mem_sz) {
60 if (base != low_mem_start)
61 panic("CONFIG_LINUX_RAM_BASE != DT memory { }");
62
63 low_mem_sz = size;
64 in_use = 1;
65 memblock_add_node(base, size, 0);
66 } else {
67#ifdef CONFIG_HIGHMEM
68 high_mem_start = base;
69 high_mem_sz = size;
70 in_use = 1;
71 memblock_add_node(base, size, 1);
72 memblock_reserve(base, size);
73#endif
74 }
75
76 pr_info("Memory @ %llx [%lldM] %s\n",
77 base, TO_MB(size), !in_use ? "Not used":"");
78}
79
80bool arch_has_descending_max_zone_pfns(void)
81{
82 return !IS_ENABLED(CONFIG_ARC_HAS_PAE40);
83}
84
85/*
86 * First memory setup routine called from setup_arch()
87 * 1. setup swapper's mm @init_mm
88 * 2. Count the pages we have and setup bootmem allocator
89 * 3. zone setup
90 */
91void __init setup_arch_memory(void)
92{
93 unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
94
95 init_mm.start_code = (unsigned long)_text;
96 init_mm.end_code = (unsigned long)_etext;
97 init_mm.end_data = (unsigned long)_edata;
98 init_mm.brk = (unsigned long)_end;
99
100 /* first page of system - kernel .vector starts here */
101 min_low_pfn = ARCH_PFN_OFFSET;
102
103 /* Last usable page of low mem */
104 max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
105
106#ifdef CONFIG_FLATMEM
107 /* pfn_valid() uses this */
108 max_mapnr = max_low_pfn - min_low_pfn;
109#endif
110
111 /*------------- bootmem allocator setup -----------------------*/
112
113 /*
114 * seed the bootmem allocator after any DT memory node parsing or
115 * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
116 *
117 * Only low mem is added, otherwise we have crashes when allocating
118 * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
119 * avail memory, ending in highmem with a > 32-bit address. However
120 * it then tries to memset it with a truncaed 32-bit handle, causing
121 * the crash
122 */
123
124 memblock_reserve(CONFIG_LINUX_LINK_BASE,
125 __pa(_end) - CONFIG_LINUX_LINK_BASE);
126
127#ifdef CONFIG_BLK_DEV_INITRD
128 if (phys_initrd_size) {
129 memblock_reserve(phys_initrd_start, phys_initrd_size);
130 initrd_start = (unsigned long)__va(phys_initrd_start);
131 initrd_end = initrd_start + phys_initrd_size;
132 }
133#endif
134
135 early_init_fdt_reserve_self();
136 early_init_fdt_scan_reserved_mem();
137
138 memblock_dump_all();
139
140 /*----------------- node/zones setup --------------------------*/
141 max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
142
143#ifdef CONFIG_HIGHMEM
144 /*
145 * Populate a new node with highmem
146 *
147 * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
148 * than addresses in normal ala low memory (0x8000_0000 based).
149 * Even with PAE, the huge peripheral space hole would waste a lot of
150 * mem with single mem_map[]. This warrants a mem_map per region design.
151 * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
152 *
153 * DISCONTIGMEM in turns requires multiple nodes. node 0 above is
154 * populated with normal memory zone while node 1 only has highmem
155 */
156 node_set_online(1);
157
158 min_high_pfn = PFN_DOWN(high_mem_start);
159 max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
160
161 max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
162
163 high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
164 kmap_init();
165#endif
166
167 free_area_init(max_zone_pfn);
168}
169
170static void __init highmem_init(void)
171{
172#ifdef CONFIG_HIGHMEM
173 unsigned long tmp;
174
175 memblock_free(high_mem_start, high_mem_sz);
176 for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
177 free_highmem_page(pfn_to_page(tmp));
178#endif
179}
180
181/*
182 * mem_init - initializes memory
183 *
184 * Frees up bootmem
185 * Calculates and displays memory available/used
186 */
187void __init mem_init(void)
188{
189 memblock_free_all();
190 highmem_init();
191 mem_init_print_info(NULL);
192}
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
4 */
5
6#include <linux/kernel.h>
7#include <linux/mm.h>
8#include <linux/memblock.h>
9#ifdef CONFIG_BLK_DEV_INITRD
10#include <linux/initrd.h>
11#endif
12#include <linux/of_fdt.h>
13#include <linux/swap.h>
14#include <linux/module.h>
15#include <linux/highmem.h>
16#include <asm/page.h>
17#include <asm/sections.h>
18#include <asm/arcregs.h>
19
20pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
21char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
22EXPORT_SYMBOL(empty_zero_page);
23
24static const unsigned long low_mem_start = CONFIG_LINUX_RAM_BASE;
25static unsigned long low_mem_sz;
26
27#ifdef CONFIG_HIGHMEM
28static unsigned long min_high_pfn, max_high_pfn;
29static phys_addr_t high_mem_start;
30static phys_addr_t high_mem_sz;
31unsigned long arch_pfn_offset;
32EXPORT_SYMBOL(arch_pfn_offset);
33#endif
34
35long __init arc_get_mem_sz(void)
36{
37 return low_mem_sz;
38}
39
40/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
41static int __init setup_mem_sz(char *str)
42{
43 low_mem_sz = memparse(str, NULL) & PAGE_MASK;
44
45 /* early console might not be setup yet - it will show up later */
46 pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
47
48 return 0;
49}
50early_param("mem", setup_mem_sz);
51
52void __init early_init_dt_add_memory_arch(u64 base, u64 size)
53{
54 int in_use = 0;
55
56 if (!low_mem_sz) {
57 if (base != low_mem_start)
58 panic("CONFIG_LINUX_RAM_BASE != DT memory { }");
59
60 low_mem_sz = size;
61 in_use = 1;
62 memblock_add_node(base, size, 0);
63 } else {
64#ifdef CONFIG_HIGHMEM
65 high_mem_start = base;
66 high_mem_sz = size;
67 in_use = 1;
68 memblock_add_node(base, size, 1);
69 memblock_reserve(base, size);
70#endif
71 }
72
73 pr_info("Memory @ %llx [%lldM] %s\n",
74 base, TO_MB(size), !in_use ? "Not used":"");
75}
76
77bool arch_has_descending_max_zone_pfns(void)
78{
79 return !IS_ENABLED(CONFIG_ARC_HAS_PAE40);
80}
81
82/*
83 * First memory setup routine called from setup_arch()
84 * 1. setup swapper's mm @init_mm
85 * 2. Count the pages we have and setup bootmem allocator
86 * 3. zone setup
87 */
88void __init setup_arch_memory(void)
89{
90 unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
91
92 setup_initial_init_mm(_text, _etext, _edata, _end);
93
94 /* first page of system - kernel .vector starts here */
95 min_low_pfn = virt_to_pfn(CONFIG_LINUX_RAM_BASE);
96
97 /* Last usable page of low mem */
98 max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
99
100 /*------------- bootmem allocator setup -----------------------*/
101
102 /*
103 * seed the bootmem allocator after any DT memory node parsing or
104 * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
105 *
106 * Only low mem is added, otherwise we have crashes when allocating
107 * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
108 * avail memory, ending in highmem with a > 32-bit address. However
109 * it then tries to memset it with a truncaed 32-bit handle, causing
110 * the crash
111 */
112
113 memblock_reserve(CONFIG_LINUX_LINK_BASE,
114 __pa(_end) - CONFIG_LINUX_LINK_BASE);
115
116#ifdef CONFIG_BLK_DEV_INITRD
117 if (phys_initrd_size) {
118 memblock_reserve(phys_initrd_start, phys_initrd_size);
119 initrd_start = (unsigned long)__va(phys_initrd_start);
120 initrd_end = initrd_start + phys_initrd_size;
121 }
122#endif
123
124 early_init_fdt_reserve_self();
125 early_init_fdt_scan_reserved_mem();
126
127 memblock_dump_all();
128
129 /*----------------- node/zones setup --------------------------*/
130 max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
131
132#ifdef CONFIG_HIGHMEM
133 /*
134 * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
135 * than addresses in normal aka low memory (0x8000_0000 based).
136 * Even with PAE, the huge peripheral space hole would waste a lot of
137 * mem with single contiguous mem_map[].
138 * Thus when HIGHMEM on ARC is enabled the memory map corresponding
139 * to the hole is freed and ARC specific version of pfn_valid()
140 * handles the hole in the memory map.
141 */
142
143 min_high_pfn = PFN_DOWN(high_mem_start);
144 max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
145
146 /*
147 * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
148 * For HIGHMEM without PAE max_high_pfn should be less than
149 * min_low_pfn to guarantee that these two regions don't overlap.
150 * For PAE case highmem is greater than lowmem, so it is natural
151 * to use max_high_pfn.
152 *
153 * In both cases, holes should be handled by pfn_valid().
154 */
155 max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
156
157 high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
158
159 arch_pfn_offset = min(min_low_pfn, min_high_pfn);
160 kmap_init();
161
162#else /* CONFIG_HIGHMEM */
163 /* pfn_valid() uses this when FLATMEM=y and HIGHMEM=n */
164 max_mapnr = max_low_pfn - min_low_pfn;
165
166#endif /* CONFIG_HIGHMEM */
167
168 free_area_init(max_zone_pfn);
169}
170
171static void __init highmem_init(void)
172{
173#ifdef CONFIG_HIGHMEM
174 unsigned long tmp;
175
176 memblock_free(high_mem_start, high_mem_sz);
177 for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
178 free_highmem_page(pfn_to_page(tmp));
179#endif
180}
181
182/*
183 * mem_init - initializes memory
184 *
185 * Frees up bootmem
186 * Calculates and displays memory available/used
187 */
188void __init mem_init(void)
189{
190 memblock_free_all();
191 highmem_init();
192}
193
194#ifdef CONFIG_HIGHMEM
195int pfn_valid(unsigned long pfn)
196{
197 return (pfn >= min_high_pfn && pfn <= max_high_pfn) ||
198 (pfn >= min_low_pfn && pfn <= max_low_pfn);
199}
200EXPORT_SYMBOL(pfn_valid);
201#endif