Loading...
1// SPDX-License-Identifier: GPL-2.0
2#include <linux/kernel.h>
3#include <linux/serial.h>
4#include <linux/serial_8250.h>
5#include <linux/serial_core.h>
6#include <linux/console.h>
7#include <linux/pci.h>
8#include <linux/of_address.h>
9#include <linux/of_device.h>
10#include <linux/serial_reg.h>
11#include <asm/io.h>
12#include <asm/mmu.h>
13#include <asm/prom.h>
14#include <asm/serial.h>
15#include <asm/udbg.h>
16#include <asm/pci-bridge.h>
17#include <asm/ppc-pci.h>
18
19#undef DEBUG
20
21#ifdef DEBUG
22#define DBG(fmt...) do { printk(fmt); } while(0)
23#else
24#define DBG(fmt...) do { } while(0)
25#endif
26
27#define MAX_LEGACY_SERIAL_PORTS 8
28
29static struct plat_serial8250_port
30legacy_serial_ports[MAX_LEGACY_SERIAL_PORTS+1];
31static struct legacy_serial_info {
32 struct device_node *np;
33 unsigned int speed;
34 unsigned int clock;
35 int irq_check_parent;
36 phys_addr_t taddr;
37} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
38
39static const struct of_device_id legacy_serial_parents[] __initconst = {
40 {.type = "soc",},
41 {.type = "tsi-bridge",},
42 {.type = "opb", },
43 {.compatible = "ibm,opb",},
44 {.compatible = "simple-bus",},
45 {.compatible = "wrs,epld-localbus",},
46 {},
47};
48
49static unsigned int legacy_serial_count;
50static int legacy_serial_console = -1;
51
52static const upf_t legacy_port_flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
53 UPF_SHARE_IRQ | UPF_FIXED_PORT;
54
55static unsigned int tsi_serial_in(struct uart_port *p, int offset)
56{
57 unsigned int tmp;
58 offset = offset << p->regshift;
59 if (offset == UART_IIR) {
60 tmp = readl(p->membase + (UART_IIR & ~3));
61 return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
62 } else
63 return readb(p->membase + offset);
64}
65
66static void tsi_serial_out(struct uart_port *p, int offset, int value)
67{
68 offset = offset << p->regshift;
69 if (!((offset == UART_IER) && (value & UART_IER_UUE)))
70 writeb(value, p->membase + offset);
71}
72
73static int __init add_legacy_port(struct device_node *np, int want_index,
74 int iotype, phys_addr_t base,
75 phys_addr_t taddr, unsigned long irq,
76 upf_t flags, int irq_check_parent)
77{
78 const __be32 *clk, *spd, *rs;
79 u32 clock = BASE_BAUD * 16;
80 u32 shift = 0;
81 int index;
82
83 /* get clock freq. if present */
84 clk = of_get_property(np, "clock-frequency", NULL);
85 if (clk && *clk)
86 clock = be32_to_cpup(clk);
87
88 /* get default speed if present */
89 spd = of_get_property(np, "current-speed", NULL);
90
91 /* get register shift if present */
92 rs = of_get_property(np, "reg-shift", NULL);
93 if (rs && *rs)
94 shift = be32_to_cpup(rs);
95
96 /* If we have a location index, then try to use it */
97 if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS)
98 index = want_index;
99 else
100 index = legacy_serial_count;
101
102 /* if our index is still out of range, that mean that
103 * array is full, we could scan for a free slot but that
104 * make little sense to bother, just skip the port
105 */
106 if (index >= MAX_LEGACY_SERIAL_PORTS)
107 return -1;
108 if (index >= legacy_serial_count)
109 legacy_serial_count = index + 1;
110
111 /* Check if there is a port who already claimed our slot */
112 if (legacy_serial_infos[index].np != NULL) {
113 /* if we still have some room, move it, else override */
114 if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) {
115 printk(KERN_DEBUG "Moved legacy port %d -> %d\n",
116 index, legacy_serial_count);
117 legacy_serial_ports[legacy_serial_count] =
118 legacy_serial_ports[index];
119 legacy_serial_infos[legacy_serial_count] =
120 legacy_serial_infos[index];
121 legacy_serial_count++;
122 } else {
123 printk(KERN_DEBUG "Replacing legacy port %d\n", index);
124 }
125 }
126
127 /* Now fill the entry */
128 memset(&legacy_serial_ports[index], 0,
129 sizeof(struct plat_serial8250_port));
130 if (iotype == UPIO_PORT)
131 legacy_serial_ports[index].iobase = base;
132 else
133 legacy_serial_ports[index].mapbase = base;
134
135 legacy_serial_ports[index].iotype = iotype;
136 legacy_serial_ports[index].uartclk = clock;
137 legacy_serial_ports[index].irq = irq;
138 legacy_serial_ports[index].flags = flags;
139 legacy_serial_ports[index].regshift = shift;
140 legacy_serial_infos[index].taddr = taddr;
141 legacy_serial_infos[index].np = of_node_get(np);
142 legacy_serial_infos[index].clock = clock;
143 legacy_serial_infos[index].speed = spd ? be32_to_cpup(spd) : 0;
144 legacy_serial_infos[index].irq_check_parent = irq_check_parent;
145
146 if (iotype == UPIO_TSI) {
147 legacy_serial_ports[index].serial_in = tsi_serial_in;
148 legacy_serial_ports[index].serial_out = tsi_serial_out;
149 }
150
151 printk(KERN_DEBUG "Found legacy serial port %d for %pOF\n",
152 index, np);
153 printk(KERN_DEBUG " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
154 (iotype == UPIO_PORT) ? "port" : "mem",
155 (unsigned long long)base, (unsigned long long)taddr, irq,
156 legacy_serial_ports[index].uartclk,
157 legacy_serial_infos[index].speed);
158
159 return index;
160}
161
162static int __init add_legacy_soc_port(struct device_node *np,
163 struct device_node *soc_dev)
164{
165 u64 addr;
166 const __be32 *addrp;
167 struct device_node *tsi = of_get_parent(np);
168
169 /* We only support ports that have a clock frequency properly
170 * encoded in the device-tree.
171 */
172 if (of_get_property(np, "clock-frequency", NULL) == NULL)
173 return -1;
174
175 /* if reg-offset don't try to use it */
176 if ((of_get_property(np, "reg-offset", NULL) != NULL))
177 return -1;
178
179 /* if rtas uses this device, don't try to use it as well */
180 if (of_get_property(np, "used-by-rtas", NULL) != NULL)
181 return -1;
182
183 /* Get the address */
184 addrp = of_get_address(soc_dev, 0, NULL, NULL);
185 if (addrp == NULL)
186 return -1;
187
188 addr = of_translate_address(soc_dev, addrp);
189 if (addr == OF_BAD_ADDR)
190 return -1;
191
192 /* Add port, irq will be dealt with later. We passed a translated
193 * IO port value. It will be fixed up later along with the irq
194 */
195 if (of_node_is_type(tsi, "tsi-bridge"))
196 return add_legacy_port(np, -1, UPIO_TSI, addr, addr,
197 0, legacy_port_flags, 0);
198 else
199 return add_legacy_port(np, -1, UPIO_MEM, addr, addr,
200 0, legacy_port_flags, 0);
201}
202
203static int __init add_legacy_isa_port(struct device_node *np,
204 struct device_node *isa_brg)
205{
206 const __be32 *reg;
207 const char *typep;
208 int index = -1;
209 u64 taddr;
210
211 DBG(" -> add_legacy_isa_port(%pOF)\n", np);
212
213 /* Get the ISA port number */
214 reg = of_get_property(np, "reg", NULL);
215 if (reg == NULL)
216 return -1;
217
218 /* Verify it's an IO port, we don't support anything else */
219 if (!(be32_to_cpu(reg[0]) & 0x00000001))
220 return -1;
221
222 /* Now look for an "ibm,aix-loc" property that gives us ordering
223 * if any...
224 */
225 typep = of_get_property(np, "ibm,aix-loc", NULL);
226
227 /* If we have a location index, then use it */
228 if (typep && *typep == 'S')
229 index = simple_strtol(typep+1, NULL, 0) - 1;
230
231 /* Translate ISA address. If it fails, we still register the port
232 * with no translated address so that it can be picked up as an IO
233 * port later by the serial driver
234 *
235 * Note: Don't even try on P8 lpc, we know it's not directly mapped
236 */
237 if (!of_device_is_compatible(isa_brg, "ibm,power8-lpc") ||
238 of_get_property(isa_brg, "ranges", NULL)) {
239 taddr = of_translate_address(np, reg);
240 if (taddr == OF_BAD_ADDR)
241 taddr = 0;
242 } else
243 taddr = 0;
244
245 /* Add port, irq will be dealt with later */
246 return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]),
247 taddr, 0, legacy_port_flags, 0);
248
249}
250
251#ifdef CONFIG_PCI
252static int __init add_legacy_pci_port(struct device_node *np,
253 struct device_node *pci_dev)
254{
255 u64 addr, base;
256 const __be32 *addrp;
257 unsigned int flags;
258 int iotype, index = -1, lindex = 0;
259
260 DBG(" -> add_legacy_pci_port(%pOF)\n", np);
261
262 /* We only support ports that have a clock frequency properly
263 * encoded in the device-tree (that is have an fcode). Anything
264 * else can't be used that early and will be normally probed by
265 * the generic 8250_pci driver later on. The reason is that 8250
266 * compatible UARTs on PCI need all sort of quirks (port offsets
267 * etc...) that this code doesn't know about
268 */
269 if (of_get_property(np, "clock-frequency", NULL) == NULL)
270 return -1;
271
272 /* Get the PCI address. Assume BAR 0 */
273 addrp = of_get_pci_address(pci_dev, 0, NULL, &flags);
274 if (addrp == NULL)
275 return -1;
276
277 /* We only support BAR 0 for now */
278 iotype = (flags & IORESOURCE_MEM) ? UPIO_MEM : UPIO_PORT;
279 addr = of_translate_address(pci_dev, addrp);
280 if (addr == OF_BAD_ADDR)
281 return -1;
282
283 /* Set the IO base to the same as the translated address for MMIO,
284 * or to the domain local IO base for PIO (it will be fixed up later)
285 */
286 if (iotype == UPIO_MEM)
287 base = addr;
288 else
289 base = of_read_number(&addrp[2], 1);
290
291 /* Try to guess an index... If we have subdevices of the pci dev,
292 * we get to their "reg" property
293 */
294 if (np != pci_dev) {
295 const __be32 *reg = of_get_property(np, "reg", NULL);
296 if (reg && (be32_to_cpup(reg) < 4))
297 index = lindex = be32_to_cpup(reg);
298 }
299
300 /* Local index means it's the Nth port in the PCI chip. Unfortunately
301 * the offset to add here is device specific. We know about those
302 * EXAR ports and we default to the most common case. If your UART
303 * doesn't work for these settings, you'll have to add your own special
304 * cases here
305 */
306 if (of_device_is_compatible(pci_dev, "pci13a8,152") ||
307 of_device_is_compatible(pci_dev, "pci13a8,154") ||
308 of_device_is_compatible(pci_dev, "pci13a8,158")) {
309 addr += 0x200 * lindex;
310 base += 0x200 * lindex;
311 } else {
312 addr += 8 * lindex;
313 base += 8 * lindex;
314 }
315
316 /* Add port, irq will be dealt with later. We passed a translated
317 * IO port value. It will be fixed up later along with the irq
318 */
319 return add_legacy_port(np, index, iotype, base, addr, 0,
320 legacy_port_flags, np != pci_dev);
321}
322#endif
323
324static void __init setup_legacy_serial_console(int console)
325{
326 struct legacy_serial_info *info = &legacy_serial_infos[console];
327 struct plat_serial8250_port *port = &legacy_serial_ports[console];
328 void __iomem *addr;
329 unsigned int stride;
330
331 stride = 1 << port->regshift;
332
333 /* Check if a translated MMIO address has been found */
334 if (info->taddr) {
335 addr = ioremap(info->taddr, 0x1000);
336 if (addr == NULL)
337 return;
338 udbg_uart_init_mmio(addr, stride);
339 } else {
340 /* Check if it's PIO and we support untranslated PIO */
341 if (port->iotype == UPIO_PORT && isa_io_special)
342 udbg_uart_init_pio(port->iobase, stride);
343 else
344 return;
345 }
346
347 /* Try to query the current speed */
348 if (info->speed == 0)
349 info->speed = udbg_probe_uart_speed(info->clock);
350
351 /* Set it up */
352 DBG("default console speed = %d\n", info->speed);
353 udbg_uart_setup(info->speed, info->clock);
354}
355
356/*
357 * This is called very early, as part of setup_system() or eventually
358 * setup_arch(), basically before anything else in this file. This function
359 * will try to build a list of all the available 8250-compatible serial ports
360 * in the machine using the Open Firmware device-tree. It currently only deals
361 * with ISA and PCI busses but could be extended. It allows a very early boot
362 * console to be initialized, that list is also used later to provide 8250 with
363 * the machine non-PCI ports and to properly pick the default console port
364 */
365void __init find_legacy_serial_ports(void)
366{
367 struct device_node *np, *stdout = NULL;
368 const char *path;
369 int index;
370
371 DBG(" -> find_legacy_serial_port()\n");
372
373 /* Now find out if one of these is out firmware console */
374 path = of_get_property(of_chosen, "linux,stdout-path", NULL);
375 if (path == NULL)
376 path = of_get_property(of_chosen, "stdout-path", NULL);
377 if (path != NULL) {
378 stdout = of_find_node_by_path(path);
379 if (stdout)
380 DBG("stdout is %pOF\n", stdout);
381 } else {
382 DBG(" no linux,stdout-path !\n");
383 }
384
385 /* Iterate over all the 16550 ports, looking for known parents */
386 for_each_compatible_node(np, "serial", "ns16550") {
387 struct device_node *parent = of_get_parent(np);
388 if (!parent)
389 continue;
390 if (of_match_node(legacy_serial_parents, parent) != NULL) {
391 if (of_device_is_available(np)) {
392 index = add_legacy_soc_port(np, np);
393 if (index >= 0 && np == stdout)
394 legacy_serial_console = index;
395 }
396 }
397 of_node_put(parent);
398 }
399
400 /* Next, fill our array with ISA ports */
401 for_each_node_by_type(np, "serial") {
402 struct device_node *isa = of_get_parent(np);
403 if (of_node_name_eq(isa, "isa") || of_node_name_eq(isa, "lpc")) {
404 if (of_device_is_available(np)) {
405 index = add_legacy_isa_port(np, isa);
406 if (index >= 0 && np == stdout)
407 legacy_serial_console = index;
408 }
409 }
410 of_node_put(isa);
411 }
412
413#ifdef CONFIG_PCI
414 /* Next, try to locate PCI ports */
415 for (np = NULL; (np = of_find_all_nodes(np));) {
416 struct device_node *pci, *parent = of_get_parent(np);
417 if (of_node_name_eq(parent, "isa")) {
418 of_node_put(parent);
419 continue;
420 }
421 if (!of_node_name_eq(np, "serial") &&
422 !of_node_is_type(np, "serial")) {
423 of_node_put(parent);
424 continue;
425 }
426 /* Check for known pciclass, and also check whether we have
427 * a device with child nodes for ports or not
428 */
429 if (of_device_is_compatible(np, "pciclass,0700") ||
430 of_device_is_compatible(np, "pciclass,070002"))
431 pci = np;
432 else if (of_device_is_compatible(parent, "pciclass,0700") ||
433 of_device_is_compatible(parent, "pciclass,070002"))
434 pci = parent;
435 else {
436 of_node_put(parent);
437 continue;
438 }
439 index = add_legacy_pci_port(np, pci);
440 if (index >= 0 && np == stdout)
441 legacy_serial_console = index;
442 of_node_put(parent);
443 }
444#endif
445
446 DBG("legacy_serial_console = %d\n", legacy_serial_console);
447 if (legacy_serial_console >= 0)
448 setup_legacy_serial_console(legacy_serial_console);
449 DBG(" <- find_legacy_serial_port()\n");
450}
451
452static struct platform_device serial_device = {
453 .name = "serial8250",
454 .id = PLAT8250_DEV_PLATFORM,
455 .dev = {
456 .platform_data = legacy_serial_ports,
457 },
458};
459
460static void __init fixup_port_irq(int index,
461 struct device_node *np,
462 struct plat_serial8250_port *port)
463{
464 unsigned int virq;
465
466 DBG("fixup_port_irq(%d)\n", index);
467
468 virq = irq_of_parse_and_map(np, 0);
469 if (!virq && legacy_serial_infos[index].irq_check_parent) {
470 np = of_get_parent(np);
471 if (np == NULL)
472 return;
473 virq = irq_of_parse_and_map(np, 0);
474 of_node_put(np);
475 }
476 if (!virq)
477 return;
478
479 port->irq = virq;
480
481#ifdef CONFIG_SERIAL_8250_FSL
482 if (of_device_is_compatible(np, "fsl,ns16550")) {
483 port->handle_irq = fsl8250_handle_irq;
484 port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
485 }
486#endif
487}
488
489static void __init fixup_port_pio(int index,
490 struct device_node *np,
491 struct plat_serial8250_port *port)
492{
493#ifdef CONFIG_PCI
494 struct pci_controller *hose;
495
496 DBG("fixup_port_pio(%d)\n", index);
497
498 hose = pci_find_hose_for_OF_device(np);
499 if (hose) {
500 unsigned long offset = (unsigned long)hose->io_base_virt -
501#ifdef CONFIG_PPC64
502 pci_io_base;
503#else
504 isa_io_base;
505#endif
506 DBG("port %d, IO %lx -> %lx\n",
507 index, port->iobase, port->iobase + offset);
508 port->iobase += offset;
509 }
510#endif
511}
512
513static void __init fixup_port_mmio(int index,
514 struct device_node *np,
515 struct plat_serial8250_port *port)
516{
517 DBG("fixup_port_mmio(%d)\n", index);
518
519 port->membase = ioremap(port->mapbase, 0x100);
520}
521
522/*
523 * This is called as an arch initcall, hopefully before the PCI bus is
524 * probed and/or the 8250 driver loaded since we need to register our
525 * platform devices before 8250 PCI ones are detected as some of them
526 * must properly "override" the platform ones.
527 *
528 * This function fixes up the interrupt value for platform ports as it
529 * couldn't be done earlier before interrupt maps have been parsed. It
530 * also "corrects" the IO address for PIO ports for the same reason,
531 * since earlier, the PHBs virtual IO space wasn't assigned yet. It then
532 * registers all those platform ports for use by the 8250 driver when it
533 * finally loads.
534 */
535static int __init serial_dev_init(void)
536{
537 int i;
538
539 if (legacy_serial_count == 0)
540 return -ENODEV;
541
542 /*
543 * Before we register the platform serial devices, we need
544 * to fixup their interrupts and their IO ports.
545 */
546 DBG("Fixing serial ports interrupts and IO ports ...\n");
547
548 for (i = 0; i < legacy_serial_count; i++) {
549 struct plat_serial8250_port *port = &legacy_serial_ports[i];
550 struct device_node *np = legacy_serial_infos[i].np;
551
552 if (!port->irq)
553 fixup_port_irq(i, np, port);
554 if (port->iotype == UPIO_PORT)
555 fixup_port_pio(i, np, port);
556 if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI))
557 fixup_port_mmio(i, np, port);
558 }
559
560 DBG("Registering platform serial ports\n");
561
562 return platform_device_register(&serial_device);
563}
564device_initcall(serial_dev_init);
565
566
567#ifdef CONFIG_SERIAL_8250_CONSOLE
568/*
569 * This is called very early, as part of console_init() (typically just after
570 * time_init()). This function is respondible for trying to find a good
571 * default console on serial ports. It tries to match the open firmware
572 * default output with one of the available serial console drivers that have
573 * been probed earlier by find_legacy_serial_ports()
574 */
575static int __init check_legacy_serial_console(void)
576{
577 struct device_node *prom_stdout = NULL;
578 int i, speed = 0, offset = 0;
579 const char *name;
580 const __be32 *spd;
581
582 DBG(" -> check_legacy_serial_console()\n");
583
584 /* The user has requested a console so this is already set up. */
585 if (strstr(boot_command_line, "console=")) {
586 DBG(" console was specified !\n");
587 return -EBUSY;
588 }
589
590 if (!of_chosen) {
591 DBG(" of_chosen is NULL !\n");
592 return -ENODEV;
593 }
594
595 if (legacy_serial_console < 0) {
596 DBG(" legacy_serial_console not found !\n");
597 return -ENODEV;
598 }
599 /* We are getting a weird phandle from OF ... */
600 /* ... So use the full path instead */
601 name = of_get_property(of_chosen, "linux,stdout-path", NULL);
602 if (name == NULL)
603 name = of_get_property(of_chosen, "stdout-path", NULL);
604 if (name == NULL) {
605 DBG(" no stdout-path !\n");
606 return -ENODEV;
607 }
608 prom_stdout = of_find_node_by_path(name);
609 if (!prom_stdout) {
610 DBG(" can't find stdout package %s !\n", name);
611 return -ENODEV;
612 }
613 DBG("stdout is %pOF\n", prom_stdout);
614
615 name = of_get_property(prom_stdout, "name", NULL);
616 if (!name) {
617 DBG(" stdout package has no name !\n");
618 goto not_found;
619 }
620 spd = of_get_property(prom_stdout, "current-speed", NULL);
621 if (spd)
622 speed = be32_to_cpup(spd);
623
624 if (strcmp(name, "serial") != 0)
625 goto not_found;
626
627 /* Look for it in probed array */
628 for (i = 0; i < legacy_serial_count; i++) {
629 if (prom_stdout != legacy_serial_infos[i].np)
630 continue;
631 offset = i;
632 speed = legacy_serial_infos[i].speed;
633 break;
634 }
635 if (i >= legacy_serial_count)
636 goto not_found;
637
638 of_node_put(prom_stdout);
639
640 DBG("Found serial console at ttyS%d\n", offset);
641
642 if (speed) {
643 static char __initdata opt[16];
644 sprintf(opt, "%d", speed);
645 return add_preferred_console("ttyS", offset, opt);
646 } else
647 return add_preferred_console("ttyS", offset, NULL);
648
649 not_found:
650 DBG("No preferred console found !\n");
651 of_node_put(prom_stdout);
652 return -ENODEV;
653}
654console_initcall(check_legacy_serial_console);
655
656#endif /* CONFIG_SERIAL_8250_CONSOLE */
1#include <linux/kernel.h>
2#include <linux/serial.h>
3#include <linux/serial_8250.h>
4#include <linux/serial_core.h>
5#include <linux/console.h>
6#include <linux/pci.h>
7#include <linux/of_address.h>
8#include <linux/of_device.h>
9#include <linux/serial_reg.h>
10#include <asm/io.h>
11#include <asm/mmu.h>
12#include <asm/prom.h>
13#include <asm/serial.h>
14#include <asm/udbg.h>
15#include <asm/pci-bridge.h>
16#include <asm/ppc-pci.h>
17
18#undef DEBUG
19
20#ifdef DEBUG
21#define DBG(fmt...) do { printk(fmt); } while(0)
22#else
23#define DBG(fmt...) do { } while(0)
24#endif
25
26#define MAX_LEGACY_SERIAL_PORTS 8
27
28static struct plat_serial8250_port
29legacy_serial_ports[MAX_LEGACY_SERIAL_PORTS+1];
30static struct legacy_serial_info {
31 struct device_node *np;
32 unsigned int speed;
33 unsigned int clock;
34 int irq_check_parent;
35 phys_addr_t taddr;
36} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
37
38static const struct of_device_id legacy_serial_parents[] __initconst = {
39 {.type = "soc",},
40 {.type = "tsi-bridge",},
41 {.type = "opb", },
42 {.compatible = "ibm,opb",},
43 {.compatible = "simple-bus",},
44 {.compatible = "wrs,epld-localbus",},
45 {},
46};
47
48static unsigned int legacy_serial_count;
49static int legacy_serial_console = -1;
50
51static const upf_t legacy_port_flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
52 UPF_SHARE_IRQ | UPF_FIXED_PORT;
53
54static unsigned int tsi_serial_in(struct uart_port *p, int offset)
55{
56 unsigned int tmp;
57 offset = offset << p->regshift;
58 if (offset == UART_IIR) {
59 tmp = readl(p->membase + (UART_IIR & ~3));
60 return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
61 } else
62 return readb(p->membase + offset);
63}
64
65static void tsi_serial_out(struct uart_port *p, int offset, int value)
66{
67 offset = offset << p->regshift;
68 if (!((offset == UART_IER) && (value & UART_IER_UUE)))
69 writeb(value, p->membase + offset);
70}
71
72static int __init add_legacy_port(struct device_node *np, int want_index,
73 int iotype, phys_addr_t base,
74 phys_addr_t taddr, unsigned long irq,
75 upf_t flags, int irq_check_parent)
76{
77 const __be32 *clk, *spd, *rs;
78 u32 clock = BASE_BAUD * 16;
79 u32 shift = 0;
80 int index;
81
82 /* get clock freq. if present */
83 clk = of_get_property(np, "clock-frequency", NULL);
84 if (clk && *clk)
85 clock = be32_to_cpup(clk);
86
87 /* get default speed if present */
88 spd = of_get_property(np, "current-speed", NULL);
89
90 /* get register shift if present */
91 rs = of_get_property(np, "reg-shift", NULL);
92 if (rs && *rs)
93 shift = be32_to_cpup(rs);
94
95 /* If we have a location index, then try to use it */
96 if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS)
97 index = want_index;
98 else
99 index = legacy_serial_count;
100
101 /* if our index is still out of range, that mean that
102 * array is full, we could scan for a free slot but that
103 * make little sense to bother, just skip the port
104 */
105 if (index >= MAX_LEGACY_SERIAL_PORTS)
106 return -1;
107 if (index >= legacy_serial_count)
108 legacy_serial_count = index + 1;
109
110 /* Check if there is a port who already claimed our slot */
111 if (legacy_serial_infos[index].np != NULL) {
112 /* if we still have some room, move it, else override */
113 if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) {
114 printk(KERN_DEBUG "Moved legacy port %d -> %d\n",
115 index, legacy_serial_count);
116 legacy_serial_ports[legacy_serial_count] =
117 legacy_serial_ports[index];
118 legacy_serial_infos[legacy_serial_count] =
119 legacy_serial_infos[index];
120 legacy_serial_count++;
121 } else {
122 printk(KERN_DEBUG "Replacing legacy port %d\n", index);
123 }
124 }
125
126 /* Now fill the entry */
127 memset(&legacy_serial_ports[index], 0,
128 sizeof(struct plat_serial8250_port));
129 if (iotype == UPIO_PORT)
130 legacy_serial_ports[index].iobase = base;
131 else
132 legacy_serial_ports[index].mapbase = base;
133
134 legacy_serial_ports[index].iotype = iotype;
135 legacy_serial_ports[index].uartclk = clock;
136 legacy_serial_ports[index].irq = irq;
137 legacy_serial_ports[index].flags = flags;
138 legacy_serial_ports[index].regshift = shift;
139 legacy_serial_infos[index].taddr = taddr;
140 legacy_serial_infos[index].np = of_node_get(np);
141 legacy_serial_infos[index].clock = clock;
142 legacy_serial_infos[index].speed = spd ? be32_to_cpup(spd) : 0;
143 legacy_serial_infos[index].irq_check_parent = irq_check_parent;
144
145 if (iotype == UPIO_TSI) {
146 legacy_serial_ports[index].serial_in = tsi_serial_in;
147 legacy_serial_ports[index].serial_out = tsi_serial_out;
148 }
149
150 printk(KERN_DEBUG "Found legacy serial port %d for %s\n",
151 index, np->full_name);
152 printk(KERN_DEBUG " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
153 (iotype == UPIO_PORT) ? "port" : "mem",
154 (unsigned long long)base, (unsigned long long)taddr, irq,
155 legacy_serial_ports[index].uartclk,
156 legacy_serial_infos[index].speed);
157
158 return index;
159}
160
161static int __init add_legacy_soc_port(struct device_node *np,
162 struct device_node *soc_dev)
163{
164 u64 addr;
165 const __be32 *addrp;
166 struct device_node *tsi = of_get_parent(np);
167
168 /* We only support ports that have a clock frequency properly
169 * encoded in the device-tree.
170 */
171 if (of_get_property(np, "clock-frequency", NULL) == NULL)
172 return -1;
173
174 /* if reg-offset don't try to use it */
175 if ((of_get_property(np, "reg-offset", NULL) != NULL))
176 return -1;
177
178 /* if rtas uses this device, don't try to use it as well */
179 if (of_get_property(np, "used-by-rtas", NULL) != NULL)
180 return -1;
181
182 /* Get the address */
183 addrp = of_get_address(soc_dev, 0, NULL, NULL);
184 if (addrp == NULL)
185 return -1;
186
187 addr = of_translate_address(soc_dev, addrp);
188 if (addr == OF_BAD_ADDR)
189 return -1;
190
191 /* Add port, irq will be dealt with later. We passed a translated
192 * IO port value. It will be fixed up later along with the irq
193 */
194 if (tsi && !strcmp(tsi->type, "tsi-bridge"))
195 return add_legacy_port(np, -1, UPIO_TSI, addr, addr,
196 NO_IRQ, legacy_port_flags, 0);
197 else
198 return add_legacy_port(np, -1, UPIO_MEM, addr, addr,
199 NO_IRQ, legacy_port_flags, 0);
200}
201
202static int __init add_legacy_isa_port(struct device_node *np,
203 struct device_node *isa_brg)
204{
205 const __be32 *reg;
206 const char *typep;
207 int index = -1;
208 u64 taddr;
209
210 DBG(" -> add_legacy_isa_port(%s)\n", np->full_name);
211
212 /* Get the ISA port number */
213 reg = of_get_property(np, "reg", NULL);
214 if (reg == NULL)
215 return -1;
216
217 /* Verify it's an IO port, we don't support anything else */
218 if (!(be32_to_cpu(reg[0]) & 0x00000001))
219 return -1;
220
221 /* Now look for an "ibm,aix-loc" property that gives us ordering
222 * if any...
223 */
224 typep = of_get_property(np, "ibm,aix-loc", NULL);
225
226 /* If we have a location index, then use it */
227 if (typep && *typep == 'S')
228 index = simple_strtol(typep+1, NULL, 0) - 1;
229
230 /* Translate ISA address. If it fails, we still register the port
231 * with no translated address so that it can be picked up as an IO
232 * port later by the serial driver
233 *
234 * Note: Don't even try on P8 lpc, we know it's not directly mapped
235 */
236 if (!of_device_is_compatible(isa_brg, "ibm,power8-lpc")) {
237 taddr = of_translate_address(np, reg);
238 if (taddr == OF_BAD_ADDR)
239 taddr = 0;
240 } else
241 taddr = 0;
242
243 /* Add port, irq will be dealt with later */
244 return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]),
245 taddr, NO_IRQ, legacy_port_flags, 0);
246
247}
248
249#ifdef CONFIG_PCI
250static int __init add_legacy_pci_port(struct device_node *np,
251 struct device_node *pci_dev)
252{
253 u64 addr, base;
254 const __be32 *addrp;
255 unsigned int flags;
256 int iotype, index = -1, lindex = 0;
257
258 DBG(" -> add_legacy_pci_port(%s)\n", np->full_name);
259
260 /* We only support ports that have a clock frequency properly
261 * encoded in the device-tree (that is have an fcode). Anything
262 * else can't be used that early and will be normally probed by
263 * the generic 8250_pci driver later on. The reason is that 8250
264 * compatible UARTs on PCI need all sort of quirks (port offsets
265 * etc...) that this code doesn't know about
266 */
267 if (of_get_property(np, "clock-frequency", NULL) == NULL)
268 return -1;
269
270 /* Get the PCI address. Assume BAR 0 */
271 addrp = of_get_pci_address(pci_dev, 0, NULL, &flags);
272 if (addrp == NULL)
273 return -1;
274
275 /* We only support BAR 0 for now */
276 iotype = (flags & IORESOURCE_MEM) ? UPIO_MEM : UPIO_PORT;
277 addr = of_translate_address(pci_dev, addrp);
278 if (addr == OF_BAD_ADDR)
279 return -1;
280
281 /* Set the IO base to the same as the translated address for MMIO,
282 * or to the domain local IO base for PIO (it will be fixed up later)
283 */
284 if (iotype == UPIO_MEM)
285 base = addr;
286 else
287 base = of_read_number(&addrp[2], 1);
288
289 /* Try to guess an index... If we have subdevices of the pci dev,
290 * we get to their "reg" property
291 */
292 if (np != pci_dev) {
293 const __be32 *reg = of_get_property(np, "reg", NULL);
294 if (reg && (be32_to_cpup(reg) < 4))
295 index = lindex = be32_to_cpup(reg);
296 }
297
298 /* Local index means it's the Nth port in the PCI chip. Unfortunately
299 * the offset to add here is device specific. We know about those
300 * EXAR ports and we default to the most common case. If your UART
301 * doesn't work for these settings, you'll have to add your own special
302 * cases here
303 */
304 if (of_device_is_compatible(pci_dev, "pci13a8,152") ||
305 of_device_is_compatible(pci_dev, "pci13a8,154") ||
306 of_device_is_compatible(pci_dev, "pci13a8,158")) {
307 addr += 0x200 * lindex;
308 base += 0x200 * lindex;
309 } else {
310 addr += 8 * lindex;
311 base += 8 * lindex;
312 }
313
314 /* Add port, irq will be dealt with later. We passed a translated
315 * IO port value. It will be fixed up later along with the irq
316 */
317 return add_legacy_port(np, index, iotype, base, addr, NO_IRQ,
318 legacy_port_flags, np != pci_dev);
319}
320#endif
321
322static void __init setup_legacy_serial_console(int console)
323{
324 struct legacy_serial_info *info = &legacy_serial_infos[console];
325 struct plat_serial8250_port *port = &legacy_serial_ports[console];
326 void __iomem *addr;
327 unsigned int stride;
328
329 stride = 1 << port->regshift;
330
331 /* Check if a translated MMIO address has been found */
332 if (info->taddr) {
333 addr = ioremap(info->taddr, 0x1000);
334 if (addr == NULL)
335 return;
336 udbg_uart_init_mmio(addr, stride);
337 } else {
338 /* Check if it's PIO and we support untranslated PIO */
339 if (port->iotype == UPIO_PORT && isa_io_special)
340 udbg_uart_init_pio(port->iobase, stride);
341 else
342 return;
343 }
344
345 /* Try to query the current speed */
346 if (info->speed == 0)
347 info->speed = udbg_probe_uart_speed(info->clock);
348
349 /* Set it up */
350 DBG("default console speed = %d\n", info->speed);
351 udbg_uart_setup(info->speed, info->clock);
352}
353
354/*
355 * This is called very early, as part of setup_system() or eventually
356 * setup_arch(), basically before anything else in this file. This function
357 * will try to build a list of all the available 8250-compatible serial ports
358 * in the machine using the Open Firmware device-tree. It currently only deals
359 * with ISA and PCI busses but could be extended. It allows a very early boot
360 * console to be initialized, that list is also used later to provide 8250 with
361 * the machine non-PCI ports and to properly pick the default console port
362 */
363void __init find_legacy_serial_ports(void)
364{
365 struct device_node *np, *stdout = NULL;
366 const char *path;
367 int index;
368
369 DBG(" -> find_legacy_serial_port()\n");
370
371 /* Now find out if one of these is out firmware console */
372 path = of_get_property(of_chosen, "linux,stdout-path", NULL);
373 if (path != NULL) {
374 stdout = of_find_node_by_path(path);
375 if (stdout)
376 DBG("stdout is %s\n", stdout->full_name);
377 } else {
378 DBG(" no linux,stdout-path !\n");
379 }
380
381 /* Iterate over all the 16550 ports, looking for known parents */
382 for_each_compatible_node(np, "serial", "ns16550") {
383 struct device_node *parent = of_get_parent(np);
384 if (!parent)
385 continue;
386 if (of_match_node(legacy_serial_parents, parent) != NULL) {
387 if (of_device_is_available(np)) {
388 index = add_legacy_soc_port(np, np);
389 if (index >= 0 && np == stdout)
390 legacy_serial_console = index;
391 }
392 }
393 of_node_put(parent);
394 }
395
396 /* Next, fill our array with ISA ports */
397 for_each_node_by_type(np, "serial") {
398 struct device_node *isa = of_get_parent(np);
399 if (isa && (!strcmp(isa->name, "isa") ||
400 !strcmp(isa->name, "lpc"))) {
401 if (of_device_is_available(np)) {
402 index = add_legacy_isa_port(np, isa);
403 if (index >= 0 && np == stdout)
404 legacy_serial_console = index;
405 }
406 }
407 of_node_put(isa);
408 }
409
410#ifdef CONFIG_PCI
411 /* Next, try to locate PCI ports */
412 for (np = NULL; (np = of_find_all_nodes(np));) {
413 struct device_node *pci, *parent = of_get_parent(np);
414 if (parent && !strcmp(parent->name, "isa")) {
415 of_node_put(parent);
416 continue;
417 }
418 if (strcmp(np->name, "serial") && strcmp(np->type, "serial")) {
419 of_node_put(parent);
420 continue;
421 }
422 /* Check for known pciclass, and also check whether we have
423 * a device with child nodes for ports or not
424 */
425 if (of_device_is_compatible(np, "pciclass,0700") ||
426 of_device_is_compatible(np, "pciclass,070002"))
427 pci = np;
428 else if (of_device_is_compatible(parent, "pciclass,0700") ||
429 of_device_is_compatible(parent, "pciclass,070002"))
430 pci = parent;
431 else {
432 of_node_put(parent);
433 continue;
434 }
435 index = add_legacy_pci_port(np, pci);
436 if (index >= 0 && np == stdout)
437 legacy_serial_console = index;
438 of_node_put(parent);
439 }
440#endif
441
442 DBG("legacy_serial_console = %d\n", legacy_serial_console);
443 if (legacy_serial_console >= 0)
444 setup_legacy_serial_console(legacy_serial_console);
445 DBG(" <- find_legacy_serial_port()\n");
446}
447
448static struct platform_device serial_device = {
449 .name = "serial8250",
450 .id = PLAT8250_DEV_PLATFORM,
451 .dev = {
452 .platform_data = legacy_serial_ports,
453 },
454};
455
456static void __init fixup_port_irq(int index,
457 struct device_node *np,
458 struct plat_serial8250_port *port)
459{
460 unsigned int virq;
461
462 DBG("fixup_port_irq(%d)\n", index);
463
464 virq = irq_of_parse_and_map(np, 0);
465 if (virq == NO_IRQ && legacy_serial_infos[index].irq_check_parent) {
466 np = of_get_parent(np);
467 if (np == NULL)
468 return;
469 virq = irq_of_parse_and_map(np, 0);
470 of_node_put(np);
471 }
472 if (virq == NO_IRQ)
473 return;
474
475 port->irq = virq;
476
477#ifdef CONFIG_SERIAL_8250_FSL
478 if (of_device_is_compatible(np, "fsl,ns16550"))
479 port->handle_irq = fsl8250_handle_irq;
480#endif
481}
482
483static void __init fixup_port_pio(int index,
484 struct device_node *np,
485 struct plat_serial8250_port *port)
486{
487#ifdef CONFIG_PCI
488 struct pci_controller *hose;
489
490 DBG("fixup_port_pio(%d)\n", index);
491
492 hose = pci_find_hose_for_OF_device(np);
493 if (hose) {
494 unsigned long offset = (unsigned long)hose->io_base_virt -
495#ifdef CONFIG_PPC64
496 pci_io_base;
497#else
498 isa_io_base;
499#endif
500 DBG("port %d, IO %lx -> %lx\n",
501 index, port->iobase, port->iobase + offset);
502 port->iobase += offset;
503 }
504#endif
505}
506
507static void __init fixup_port_mmio(int index,
508 struct device_node *np,
509 struct plat_serial8250_port *port)
510{
511 DBG("fixup_port_mmio(%d)\n", index);
512
513 port->membase = ioremap(port->mapbase, 0x100);
514}
515
516/*
517 * This is called as an arch initcall, hopefully before the PCI bus is
518 * probed and/or the 8250 driver loaded since we need to register our
519 * platform devices before 8250 PCI ones are detected as some of them
520 * must properly "override" the platform ones.
521 *
522 * This function fixes up the interrupt value for platform ports as it
523 * couldn't be done earlier before interrupt maps have been parsed. It
524 * also "corrects" the IO address for PIO ports for the same reason,
525 * since earlier, the PHBs virtual IO space wasn't assigned yet. It then
526 * registers all those platform ports for use by the 8250 driver when it
527 * finally loads.
528 */
529static int __init serial_dev_init(void)
530{
531 int i;
532
533 if (legacy_serial_count == 0)
534 return -ENODEV;
535
536 /*
537 * Before we register the platform serial devices, we need
538 * to fixup their interrupts and their IO ports.
539 */
540 DBG("Fixing serial ports interrupts and IO ports ...\n");
541
542 for (i = 0; i < legacy_serial_count; i++) {
543 struct plat_serial8250_port *port = &legacy_serial_ports[i];
544 struct device_node *np = legacy_serial_infos[i].np;
545
546 if (port->irq == NO_IRQ)
547 fixup_port_irq(i, np, port);
548 if (port->iotype == UPIO_PORT)
549 fixup_port_pio(i, np, port);
550 if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI))
551 fixup_port_mmio(i, np, port);
552 }
553
554 DBG("Registering platform serial ports\n");
555
556 return platform_device_register(&serial_device);
557}
558device_initcall(serial_dev_init);
559
560
561#ifdef CONFIG_SERIAL_8250_CONSOLE
562/*
563 * This is called very early, as part of console_init() (typically just after
564 * time_init()). This function is respondible for trying to find a good
565 * default console on serial ports. It tries to match the open firmware
566 * default output with one of the available serial console drivers that have
567 * been probed earlier by find_legacy_serial_ports()
568 */
569static int __init check_legacy_serial_console(void)
570{
571 struct device_node *prom_stdout = NULL;
572 int i, speed = 0, offset = 0;
573 const char *name;
574 const __be32 *spd;
575
576 DBG(" -> check_legacy_serial_console()\n");
577
578 /* The user has requested a console so this is already set up. */
579 if (strstr(boot_command_line, "console=")) {
580 DBG(" console was specified !\n");
581 return -EBUSY;
582 }
583
584 if (!of_chosen) {
585 DBG(" of_chosen is NULL !\n");
586 return -ENODEV;
587 }
588
589 if (legacy_serial_console < 0) {
590 DBG(" legacy_serial_console not found !\n");
591 return -ENODEV;
592 }
593 /* We are getting a weird phandle from OF ... */
594 /* ... So use the full path instead */
595 name = of_get_property(of_chosen, "linux,stdout-path", NULL);
596 if (name == NULL) {
597 DBG(" no linux,stdout-path !\n");
598 return -ENODEV;
599 }
600 prom_stdout = of_find_node_by_path(name);
601 if (!prom_stdout) {
602 DBG(" can't find stdout package %s !\n", name);
603 return -ENODEV;
604 }
605 DBG("stdout is %s\n", prom_stdout->full_name);
606
607 name = of_get_property(prom_stdout, "name", NULL);
608 if (!name) {
609 DBG(" stdout package has no name !\n");
610 goto not_found;
611 }
612 spd = of_get_property(prom_stdout, "current-speed", NULL);
613 if (spd)
614 speed = be32_to_cpup(spd);
615
616 if (strcmp(name, "serial") != 0)
617 goto not_found;
618
619 /* Look for it in probed array */
620 for (i = 0; i < legacy_serial_count; i++) {
621 if (prom_stdout != legacy_serial_infos[i].np)
622 continue;
623 offset = i;
624 speed = legacy_serial_infos[i].speed;
625 break;
626 }
627 if (i >= legacy_serial_count)
628 goto not_found;
629
630 of_node_put(prom_stdout);
631
632 DBG("Found serial console at ttyS%d\n", offset);
633
634 if (speed) {
635 static char __initdata opt[16];
636 sprintf(opt, "%d", speed);
637 return add_preferred_console("ttyS", offset, opt);
638 } else
639 return add_preferred_console("ttyS", offset, NULL);
640
641 not_found:
642 DBG("No preferred console found !\n");
643 of_node_put(prom_stdout);
644 return -ENODEV;
645}
646console_initcall(check_legacy_serial_console);
647
648#endif /* CONFIG_SERIAL_8250_CONSOLE */