Loading...
Note: File does not exist in v4.6.
1.. SPDX-License-Identifier: GPL-2.0
2
3=========================================
4Overview of the Linux Virtual File System
5=========================================
6
7Original author: Richard Gooch <rgooch@atnf.csiro.au>
8
9- Copyright (C) 1999 Richard Gooch
10- Copyright (C) 2005 Pekka Enberg
11
12
13Introduction
14============
15
16The Virtual File System (also known as the Virtual Filesystem Switch) is
17the software layer in the kernel that provides the filesystem interface
18to userspace programs. It also provides an abstraction within the
19kernel which allows different filesystem implementations to coexist.
20
21VFS system calls open(2), stat(2), read(2), write(2), chmod(2) and so on
22are called from a process context. Filesystem locking is described in
23the document Documentation/filesystems/locking.rst.
24
25
26Directory Entry Cache (dcache)
27------------------------------
28
29The VFS implements the open(2), stat(2), chmod(2), and similar system
30calls. The pathname argument that is passed to them is used by the VFS
31to search through the directory entry cache (also known as the dentry
32cache or dcache). This provides a very fast look-up mechanism to
33translate a pathname (filename) into a specific dentry. Dentries live
34in RAM and are never saved to disc: they exist only for performance.
35
36The dentry cache is meant to be a view into your entire filespace. As
37most computers cannot fit all dentries in the RAM at the same time, some
38bits of the cache are missing. In order to resolve your pathname into a
39dentry, the VFS may have to resort to creating dentries along the way,
40and then loading the inode. This is done by looking up the inode.
41
42
43The Inode Object
44----------------
45
46An individual dentry usually has a pointer to an inode. Inodes are
47filesystem objects such as regular files, directories, FIFOs and other
48beasts. They live either on the disc (for block device filesystems) or
49in the memory (for pseudo filesystems). Inodes that live on the disc
50are copied into the memory when required and changes to the inode are
51written back to disc. A single inode can be pointed to by multiple
52dentries (hard links, for example, do this).
53
54To look up an inode requires that the VFS calls the lookup() method of
55the parent directory inode. This method is installed by the specific
56filesystem implementation that the inode lives in. Once the VFS has the
57required dentry (and hence the inode), we can do all those boring things
58like open(2) the file, or stat(2) it to peek at the inode data. The
59stat(2) operation is fairly simple: once the VFS has the dentry, it
60peeks at the inode data and passes some of it back to userspace.
61
62
63The File Object
64---------------
65
66Opening a file requires another operation: allocation of a file
67structure (this is the kernel-side implementation of file descriptors).
68The freshly allocated file structure is initialized with a pointer to
69the dentry and a set of file operation member functions. These are
70taken from the inode data. The open() file method is then called so the
71specific filesystem implementation can do its work. You can see that
72this is another switch performed by the VFS. The file structure is
73placed into the file descriptor table for the process.
74
75Reading, writing and closing files (and other assorted VFS operations)
76is done by using the userspace file descriptor to grab the appropriate
77file structure, and then calling the required file structure method to
78do whatever is required. For as long as the file is open, it keeps the
79dentry in use, which in turn means that the VFS inode is still in use.
80
81
82Registering and Mounting a Filesystem
83=====================================
84
85To register and unregister a filesystem, use the following API
86functions:
87
88.. code-block:: c
89
90 #include <linux/fs.h>
91
92 extern int register_filesystem(struct file_system_type *);
93 extern int unregister_filesystem(struct file_system_type *);
94
95The passed struct file_system_type describes your filesystem. When a
96request is made to mount a filesystem onto a directory in your
97namespace, the VFS will call the appropriate mount() method for the
98specific filesystem. New vfsmount referring to the tree returned by
99->mount() will be attached to the mountpoint, so that when pathname
100resolution reaches the mountpoint it will jump into the root of that
101vfsmount.
102
103You can see all filesystems that are registered to the kernel in the
104file /proc/filesystems.
105
106
107struct file_system_type
108-----------------------
109
110This describes the filesystem. As of kernel 2.6.39, the following
111members are defined:
112
113.. code-block:: c
114
115 struct file_system_operations {
116 const char *name;
117 int fs_flags;
118 struct dentry *(*mount) (struct file_system_type *, int,
119 const char *, void *);
120 void (*kill_sb) (struct super_block *);
121 struct module *owner;
122 struct file_system_type * next;
123 struct list_head fs_supers;
124 struct lock_class_key s_lock_key;
125 struct lock_class_key s_umount_key;
126 };
127
128``name``
129 the name of the filesystem type, such as "ext2", "iso9660",
130 "msdos" and so on
131
132``fs_flags``
133 various flags (i.e. FS_REQUIRES_DEV, FS_NO_DCACHE, etc.)
134
135``mount``
136 the method to call when a new instance of this filesystem should
137 be mounted
138
139``kill_sb``
140 the method to call when an instance of this filesystem should be
141 shut down
142
143
144``owner``
145 for internal VFS use: you should initialize this to THIS_MODULE
146 in most cases.
147
148``next``
149 for internal VFS use: you should initialize this to NULL
150
151 s_lock_key, s_umount_key: lockdep-specific
152
153The mount() method has the following arguments:
154
155``struct file_system_type *fs_type``
156 describes the filesystem, partly initialized by the specific
157 filesystem code
158
159``int flags``
160 mount flags
161
162``const char *dev_name``
163 the device name we are mounting.
164
165``void *data``
166 arbitrary mount options, usually comes as an ASCII string (see
167 "Mount Options" section)
168
169The mount() method must return the root dentry of the tree requested by
170caller. An active reference to its superblock must be grabbed and the
171superblock must be locked. On failure it should return ERR_PTR(error).
172
173The arguments match those of mount(2) and their interpretation depends
174on filesystem type. E.g. for block filesystems, dev_name is interpreted
175as block device name, that device is opened and if it contains a
176suitable filesystem image the method creates and initializes struct
177super_block accordingly, returning its root dentry to caller.
178
179->mount() may choose to return a subtree of existing filesystem - it
180doesn't have to create a new one. The main result from the caller's
181point of view is a reference to dentry at the root of (sub)tree to be
182attached; creation of new superblock is a common side effect.
183
184The most interesting member of the superblock structure that the mount()
185method fills in is the "s_op" field. This is a pointer to a "struct
186super_operations" which describes the next level of the filesystem
187implementation.
188
189Usually, a filesystem uses one of the generic mount() implementations
190and provides a fill_super() callback instead. The generic variants are:
191
192``mount_bdev``
193 mount a filesystem residing on a block device
194
195``mount_nodev``
196 mount a filesystem that is not backed by a device
197
198``mount_single``
199 mount a filesystem which shares the instance between all mounts
200
201A fill_super() callback implementation has the following arguments:
202
203``struct super_block *sb``
204 the superblock structure. The callback must initialize this
205 properly.
206
207``void *data``
208 arbitrary mount options, usually comes as an ASCII string (see
209 "Mount Options" section)
210
211``int silent``
212 whether or not to be silent on error
213
214
215The Superblock Object
216=====================
217
218A superblock object represents a mounted filesystem.
219
220
221struct super_operations
222-----------------------
223
224This describes how the VFS can manipulate the superblock of your
225filesystem. As of kernel 2.6.22, the following members are defined:
226
227.. code-block:: c
228
229 struct super_operations {
230 struct inode *(*alloc_inode)(struct super_block *sb);
231 void (*destroy_inode)(struct inode *);
232
233 void (*dirty_inode) (struct inode *, int flags);
234 int (*write_inode) (struct inode *, int);
235 void (*drop_inode) (struct inode *);
236 void (*delete_inode) (struct inode *);
237 void (*put_super) (struct super_block *);
238 int (*sync_fs)(struct super_block *sb, int wait);
239 int (*freeze_fs) (struct super_block *);
240 int (*unfreeze_fs) (struct super_block *);
241 int (*statfs) (struct dentry *, struct kstatfs *);
242 int (*remount_fs) (struct super_block *, int *, char *);
243 void (*clear_inode) (struct inode *);
244 void (*umount_begin) (struct super_block *);
245
246 int (*show_options)(struct seq_file *, struct dentry *);
247
248 ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
249 ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
250 int (*nr_cached_objects)(struct super_block *);
251 void (*free_cached_objects)(struct super_block *, int);
252 };
253
254All methods are called without any locks being held, unless otherwise
255noted. This means that most methods can block safely. All methods are
256only called from a process context (i.e. not from an interrupt handler
257or bottom half).
258
259``alloc_inode``
260 this method is called by alloc_inode() to allocate memory for
261 struct inode and initialize it. If this function is not
262 defined, a simple 'struct inode' is allocated. Normally
263 alloc_inode will be used to allocate a larger structure which
264 contains a 'struct inode' embedded within it.
265
266``destroy_inode``
267 this method is called by destroy_inode() to release resources
268 allocated for struct inode. It is only required if
269 ->alloc_inode was defined and simply undoes anything done by
270 ->alloc_inode.
271
272``dirty_inode``
273 this method is called by the VFS to mark an inode dirty.
274
275``write_inode``
276 this method is called when the VFS needs to write an inode to
277 disc. The second parameter indicates whether the write should
278 be synchronous or not, not all filesystems check this flag.
279
280``drop_inode``
281 called when the last access to the inode is dropped, with the
282 inode->i_lock spinlock held.
283
284 This method should be either NULL (normal UNIX filesystem
285 semantics) or "generic_delete_inode" (for filesystems that do
286 not want to cache inodes - causing "delete_inode" to always be
287 called regardless of the value of i_nlink)
288
289 The "generic_delete_inode()" behavior is equivalent to the old
290 practice of using "force_delete" in the put_inode() case, but
291 does not have the races that the "force_delete()" approach had.
292
293``delete_inode``
294 called when the VFS wants to delete an inode
295
296``put_super``
297 called when the VFS wishes to free the superblock
298 (i.e. unmount). This is called with the superblock lock held
299
300``sync_fs``
301 called when VFS is writing out all dirty data associated with a
302 superblock. The second parameter indicates whether the method
303 should wait until the write out has been completed. Optional.
304
305``freeze_fs``
306 called when VFS is locking a filesystem and forcing it into a
307 consistent state. This method is currently used by the Logical
308 Volume Manager (LVM).
309
310``unfreeze_fs``
311 called when VFS is unlocking a filesystem and making it writable
312 again.
313
314``statfs``
315 called when the VFS needs to get filesystem statistics.
316
317``remount_fs``
318 called when the filesystem is remounted. This is called with
319 the kernel lock held
320
321``clear_inode``
322 called then the VFS clears the inode. Optional
323
324``umount_begin``
325 called when the VFS is unmounting a filesystem.
326
327``show_options``
328 called by the VFS to show mount options for /proc/<pid>/mounts.
329 (see "Mount Options" section)
330
331``quota_read``
332 called by the VFS to read from filesystem quota file.
333
334``quota_write``
335 called by the VFS to write to filesystem quota file.
336
337``nr_cached_objects``
338 called by the sb cache shrinking function for the filesystem to
339 return the number of freeable cached objects it contains.
340 Optional.
341
342``free_cache_objects``
343 called by the sb cache shrinking function for the filesystem to
344 scan the number of objects indicated to try to free them.
345 Optional, but any filesystem implementing this method needs to
346 also implement ->nr_cached_objects for it to be called
347 correctly.
348
349 We can't do anything with any errors that the filesystem might
350 encountered, hence the void return type. This will never be
351 called if the VM is trying to reclaim under GFP_NOFS conditions,
352 hence this method does not need to handle that situation itself.
353
354 Implementations must include conditional reschedule calls inside
355 any scanning loop that is done. This allows the VFS to
356 determine appropriate scan batch sizes without having to worry
357 about whether implementations will cause holdoff problems due to
358 large scan batch sizes.
359
360Whoever sets up the inode is responsible for filling in the "i_op"
361field. This is a pointer to a "struct inode_operations" which describes
362the methods that can be performed on individual inodes.
363
364
365struct xattr_handlers
366---------------------
367
368On filesystems that support extended attributes (xattrs), the s_xattr
369superblock field points to a NULL-terminated array of xattr handlers.
370Extended attributes are name:value pairs.
371
372``name``
373 Indicates that the handler matches attributes with the specified
374 name (such as "system.posix_acl_access"); the prefix field must
375 be NULL.
376
377``prefix``
378 Indicates that the handler matches all attributes with the
379 specified name prefix (such as "user."); the name field must be
380 NULL.
381
382``list``
383 Determine if attributes matching this xattr handler should be
384 listed for a particular dentry. Used by some listxattr
385 implementations like generic_listxattr.
386
387``get``
388 Called by the VFS to get the value of a particular extended
389 attribute. This method is called by the getxattr(2) system
390 call.
391
392``set``
393 Called by the VFS to set the value of a particular extended
394 attribute. When the new value is NULL, called to remove a
395 particular extended attribute. This method is called by the
396 setxattr(2) and removexattr(2) system calls.
397
398When none of the xattr handlers of a filesystem match the specified
399attribute name or when a filesystem doesn't support extended attributes,
400the various ``*xattr(2)`` system calls return -EOPNOTSUPP.
401
402
403The Inode Object
404================
405
406An inode object represents an object within the filesystem.
407
408
409struct inode_operations
410-----------------------
411
412This describes how the VFS can manipulate an inode in your filesystem.
413As of kernel 2.6.22, the following members are defined:
414
415.. code-block:: c
416
417 struct inode_operations {
418 int (*create) (struct inode *,struct dentry *, umode_t, bool);
419 struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int);
420 int (*link) (struct dentry *,struct inode *,struct dentry *);
421 int (*unlink) (struct inode *,struct dentry *);
422 int (*symlink) (struct inode *,struct dentry *,const char *);
423 int (*mkdir) (struct inode *,struct dentry *,umode_t);
424 int (*rmdir) (struct inode *,struct dentry *);
425 int (*mknod) (struct inode *,struct dentry *,umode_t,dev_t);
426 int (*rename) (struct inode *, struct dentry *,
427 struct inode *, struct dentry *, unsigned int);
428 int (*readlink) (struct dentry *, char __user *,int);
429 const char *(*get_link) (struct dentry *, struct inode *,
430 struct delayed_call *);
431 int (*permission) (struct inode *, int);
432 int (*get_acl)(struct inode *, int);
433 int (*setattr) (struct dentry *, struct iattr *);
434 int (*getattr) (const struct path *, struct kstat *, u32, unsigned int);
435 ssize_t (*listxattr) (struct dentry *, char *, size_t);
436 void (*update_time)(struct inode *, struct timespec *, int);
437 int (*atomic_open)(struct inode *, struct dentry *, struct file *,
438 unsigned open_flag, umode_t create_mode);
439 int (*tmpfile) (struct inode *, struct dentry *, umode_t);
440 };
441
442Again, all methods are called without any locks being held, unless
443otherwise noted.
444
445``create``
446 called by the open(2) and creat(2) system calls. Only required
447 if you want to support regular files. The dentry you get should
448 not have an inode (i.e. it should be a negative dentry). Here
449 you will probably call d_instantiate() with the dentry and the
450 newly created inode
451
452``lookup``
453 called when the VFS needs to look up an inode in a parent
454 directory. The name to look for is found in the dentry. This
455 method must call d_add() to insert the found inode into the
456 dentry. The "i_count" field in the inode structure should be
457 incremented. If the named inode does not exist a NULL inode
458 should be inserted into the dentry (this is called a negative
459 dentry). Returning an error code from this routine must only be
460 done on a real error, otherwise creating inodes with system
461 calls like create(2), mknod(2), mkdir(2) and so on will fail.
462 If you wish to overload the dentry methods then you should
463 initialise the "d_dop" field in the dentry; this is a pointer to
464 a struct "dentry_operations". This method is called with the
465 directory inode semaphore held
466
467``link``
468 called by the link(2) system call. Only required if you want to
469 support hard links. You will probably need to call
470 d_instantiate() just as you would in the create() method
471
472``unlink``
473 called by the unlink(2) system call. Only required if you want
474 to support deleting inodes
475
476``symlink``
477 called by the symlink(2) system call. Only required if you want
478 to support symlinks. You will probably need to call
479 d_instantiate() just as you would in the create() method
480
481``mkdir``
482 called by the mkdir(2) system call. Only required if you want
483 to support creating subdirectories. You will probably need to
484 call d_instantiate() just as you would in the create() method
485
486``rmdir``
487 called by the rmdir(2) system call. Only required if you want
488 to support deleting subdirectories
489
490``mknod``
491 called by the mknod(2) system call to create a device (char,
492 block) inode or a named pipe (FIFO) or socket. Only required if
493 you want to support creating these types of inodes. You will
494 probably need to call d_instantiate() just as you would in the
495 create() method
496
497``rename``
498 called by the rename(2) system call to rename the object to have
499 the parent and name given by the second inode and dentry.
500
501 The filesystem must return -EINVAL for any unsupported or
502 unknown flags. Currently the following flags are implemented:
503 (1) RENAME_NOREPLACE: this flag indicates that if the target of
504 the rename exists the rename should fail with -EEXIST instead of
505 replacing the target. The VFS already checks for existence, so
506 for local filesystems the RENAME_NOREPLACE implementation is
507 equivalent to plain rename.
508 (2) RENAME_EXCHANGE: exchange source and target. Both must
509 exist; this is checked by the VFS. Unlike plain rename, source
510 and target may be of different type.
511
512``get_link``
513 called by the VFS to follow a symbolic link to the inode it
514 points to. Only required if you want to support symbolic links.
515 This method returns the symlink body to traverse (and possibly
516 resets the current position with nd_jump_link()). If the body
517 won't go away until the inode is gone, nothing else is needed;
518 if it needs to be otherwise pinned, arrange for its release by
519 having get_link(..., ..., done) do set_delayed_call(done,
520 destructor, argument). In that case destructor(argument) will
521 be called once VFS is done with the body you've returned. May
522 be called in RCU mode; that is indicated by NULL dentry
523 argument. If request can't be handled without leaving RCU mode,
524 have it return ERR_PTR(-ECHILD).
525
526 If the filesystem stores the symlink target in ->i_link, the
527 VFS may use it directly without calling ->get_link(); however,
528 ->get_link() must still be provided. ->i_link must not be
529 freed until after an RCU grace period. Writing to ->i_link
530 post-iget() time requires a 'release' memory barrier.
531
532``readlink``
533 this is now just an override for use by readlink(2) for the
534 cases when ->get_link uses nd_jump_link() or object is not in
535 fact a symlink. Normally filesystems should only implement
536 ->get_link for symlinks and readlink(2) will automatically use
537 that.
538
539``permission``
540 called by the VFS to check for access rights on a POSIX-like
541 filesystem.
542
543 May be called in rcu-walk mode (mask & MAY_NOT_BLOCK). If in
544 rcu-walk mode, the filesystem must check the permission without
545 blocking or storing to the inode.
546
547 If a situation is encountered that rcu-walk cannot handle,
548 return
549 -ECHILD and it will be called again in ref-walk mode.
550
551``setattr``
552 called by the VFS to set attributes for a file. This method is
553 called by chmod(2) and related system calls.
554
555``getattr``
556 called by the VFS to get attributes of a file. This method is
557 called by stat(2) and related system calls.
558
559``listxattr``
560 called by the VFS to list all extended attributes for a given
561 file. This method is called by the listxattr(2) system call.
562
563``update_time``
564 called by the VFS to update a specific time or the i_version of
565 an inode. If this is not defined the VFS will update the inode
566 itself and call mark_inode_dirty_sync.
567
568``atomic_open``
569 called on the last component of an open. Using this optional
570 method the filesystem can look up, possibly create and open the
571 file in one atomic operation. If it wants to leave actual
572 opening to the caller (e.g. if the file turned out to be a
573 symlink, device, or just something filesystem won't do atomic
574 open for), it may signal this by returning finish_no_open(file,
575 dentry). This method is only called if the last component is
576 negative or needs lookup. Cached positive dentries are still
577 handled by f_op->open(). If the file was created, FMODE_CREATED
578 flag should be set in file->f_mode. In case of O_EXCL the
579 method must only succeed if the file didn't exist and hence
580 FMODE_CREATED shall always be set on success.
581
582``tmpfile``
583 called in the end of O_TMPFILE open(). Optional, equivalent to
584 atomically creating, opening and unlinking a file in given
585 directory.
586
587
588The Address Space Object
589========================
590
591The address space object is used to group and manage pages in the page
592cache. It can be used to keep track of the pages in a file (or anything
593else) and also track the mapping of sections of the file into process
594address spaces.
595
596There are a number of distinct yet related services that an
597address-space can provide. These include communicating memory pressure,
598page lookup by address, and keeping track of pages tagged as Dirty or
599Writeback.
600
601The first can be used independently to the others. The VM can try to
602either write dirty pages in order to clean them, or release clean pages
603in order to reuse them. To do this it can call the ->writepage method
604on dirty pages, and ->releasepage on clean pages with PagePrivate set.
605Clean pages without PagePrivate and with no external references will be
606released without notice being given to the address_space.
607
608To achieve this functionality, pages need to be placed on an LRU with
609lru_cache_add and mark_page_active needs to be called whenever the page
610is used.
611
612Pages are normally kept in a radix tree index by ->index. This tree
613maintains information about the PG_Dirty and PG_Writeback status of each
614page, so that pages with either of these flags can be found quickly.
615
616The Dirty tag is primarily used by mpage_writepages - the default
617->writepages method. It uses the tag to find dirty pages to call
618->writepage on. If mpage_writepages is not used (i.e. the address
619provides its own ->writepages) , the PAGECACHE_TAG_DIRTY tag is almost
620unused. write_inode_now and sync_inode do use it (through
621__sync_single_inode) to check if ->writepages has been successful in
622writing out the whole address_space.
623
624The Writeback tag is used by filemap*wait* and sync_page* functions, via
625filemap_fdatawait_range, to wait for all writeback to complete.
626
627An address_space handler may attach extra information to a page,
628typically using the 'private' field in the 'struct page'. If such
629information is attached, the PG_Private flag should be set. This will
630cause various VM routines to make extra calls into the address_space
631handler to deal with that data.
632
633An address space acts as an intermediate between storage and
634application. Data is read into the address space a whole page at a
635time, and provided to the application either by copying of the page, or
636by memory-mapping the page. Data is written into the address space by
637the application, and then written-back to storage typically in whole
638pages, however the address_space has finer control of write sizes.
639
640The read process essentially only requires 'readpage'. The write
641process is more complicated and uses write_begin/write_end or
642set_page_dirty to write data into the address_space, and writepage and
643writepages to writeback data to storage.
644
645Adding and removing pages to/from an address_space is protected by the
646inode's i_mutex.
647
648When data is written to a page, the PG_Dirty flag should be set. It
649typically remains set until writepage asks for it to be written. This
650should clear PG_Dirty and set PG_Writeback. It can be actually written
651at any point after PG_Dirty is clear. Once it is known to be safe,
652PG_Writeback is cleared.
653
654Writeback makes use of a writeback_control structure to direct the
655operations. This gives the writepage and writepages operations some
656information about the nature of and reason for the writeback request,
657and the constraints under which it is being done. It is also used to
658return information back to the caller about the result of a writepage or
659writepages request.
660
661
662Handling errors during writeback
663--------------------------------
664
665Most applications that do buffered I/O will periodically call a file
666synchronization call (fsync, fdatasync, msync or sync_file_range) to
667ensure that data written has made it to the backing store. When there
668is an error during writeback, they expect that error to be reported when
669a file sync request is made. After an error has been reported on one
670request, subsequent requests on the same file descriptor should return
6710, unless further writeback errors have occurred since the previous file
672syncronization.
673
674Ideally, the kernel would report errors only on file descriptions on
675which writes were done that subsequently failed to be written back. The
676generic pagecache infrastructure does not track the file descriptions
677that have dirtied each individual page however, so determining which
678file descriptors should get back an error is not possible.
679
680Instead, the generic writeback error tracking infrastructure in the
681kernel settles for reporting errors to fsync on all file descriptions
682that were open at the time that the error occurred. In a situation with
683multiple writers, all of them will get back an error on a subsequent
684fsync, even if all of the writes done through that particular file
685descriptor succeeded (or even if there were no writes on that file
686descriptor at all).
687
688Filesystems that wish to use this infrastructure should call
689mapping_set_error to record the error in the address_space when it
690occurs. Then, after writing back data from the pagecache in their
691file->fsync operation, they should call file_check_and_advance_wb_err to
692ensure that the struct file's error cursor has advanced to the correct
693point in the stream of errors emitted by the backing device(s).
694
695
696struct address_space_operations
697-------------------------------
698
699This describes how the VFS can manipulate mapping of a file to page
700cache in your filesystem. The following members are defined:
701
702.. code-block:: c
703
704 struct address_space_operations {
705 int (*writepage)(struct page *page, struct writeback_control *wbc);
706 int (*readpage)(struct file *, struct page *);
707 int (*writepages)(struct address_space *, struct writeback_control *);
708 int (*set_page_dirty)(struct page *page);
709 void (*readahead)(struct readahead_control *);
710 int (*readpages)(struct file *filp, struct address_space *mapping,
711 struct list_head *pages, unsigned nr_pages);
712 int (*write_begin)(struct file *, struct address_space *mapping,
713 loff_t pos, unsigned len, unsigned flags,
714 struct page **pagep, void **fsdata);
715 int (*write_end)(struct file *, struct address_space *mapping,
716 loff_t pos, unsigned len, unsigned copied,
717 struct page *page, void *fsdata);
718 sector_t (*bmap)(struct address_space *, sector_t);
719 void (*invalidatepage) (struct page *, unsigned int, unsigned int);
720 int (*releasepage) (struct page *, int);
721 void (*freepage)(struct page *);
722 ssize_t (*direct_IO)(struct kiocb *, struct iov_iter *iter);
723 /* isolate a page for migration */
724 bool (*isolate_page) (struct page *, isolate_mode_t);
725 /* migrate the contents of a page to the specified target */
726 int (*migratepage) (struct page *, struct page *);
727 /* put migration-failed page back to right list */
728 void (*putback_page) (struct page *);
729 int (*launder_page) (struct page *);
730
731 int (*is_partially_uptodate) (struct page *, unsigned long,
732 unsigned long);
733 void (*is_dirty_writeback) (struct page *, bool *, bool *);
734 int (*error_remove_page) (struct mapping *mapping, struct page *page);
735 int (*swap_activate)(struct file *);
736 int (*swap_deactivate)(struct file *);
737 };
738
739``writepage``
740 called by the VM to write a dirty page to backing store. This
741 may happen for data integrity reasons (i.e. 'sync'), or to free
742 up memory (flush). The difference can be seen in
743 wbc->sync_mode. The PG_Dirty flag has been cleared and
744 PageLocked is true. writepage should start writeout, should set
745 PG_Writeback, and should make sure the page is unlocked, either
746 synchronously or asynchronously when the write operation
747 completes.
748
749 If wbc->sync_mode is WB_SYNC_NONE, ->writepage doesn't have to
750 try too hard if there are problems, and may choose to write out
751 other pages from the mapping if that is easier (e.g. due to
752 internal dependencies). If it chooses not to start writeout, it
753 should return AOP_WRITEPAGE_ACTIVATE so that the VM will not
754 keep calling ->writepage on that page.
755
756 See the file "Locking" for more details.
757
758``readpage``
759 called by the VM to read a page from backing store. The page
760 will be Locked when readpage is called, and should be unlocked
761 and marked uptodate once the read completes. If ->readpage
762 discovers that it needs to unlock the page for some reason, it
763 can do so, and then return AOP_TRUNCATED_PAGE. In this case,
764 the page will be relocated, relocked and if that all succeeds,
765 ->readpage will be called again.
766
767``writepages``
768 called by the VM to write out pages associated with the
769 address_space object. If wbc->sync_mode is WB_SYNC_ALL, then
770 the writeback_control will specify a range of pages that must be
771 written out. If it is WB_SYNC_NONE, then a nr_to_write is
772 given and that many pages should be written if possible. If no
773 ->writepages is given, then mpage_writepages is used instead.
774 This will choose pages from the address space that are tagged as
775 DIRTY and will pass them to ->writepage.
776
777``set_page_dirty``
778 called by the VM to set a page dirty. This is particularly
779 needed if an address space attaches private data to a page, and
780 that data needs to be updated when a page is dirtied. This is
781 called, for example, when a memory mapped page gets modified.
782 If defined, it should set the PageDirty flag, and the
783 PAGECACHE_TAG_DIRTY tag in the radix tree.
784
785``readahead``
786 Called by the VM to read pages associated with the address_space
787 object. The pages are consecutive in the page cache and are
788 locked. The implementation should decrement the page refcount
789 after starting I/O on each page. Usually the page will be
790 unlocked by the I/O completion handler. If the filesystem decides
791 to stop attempting I/O before reaching the end of the readahead
792 window, it can simply return. The caller will decrement the page
793 refcount and unlock the remaining pages for you. Set PageUptodate
794 if the I/O completes successfully. Setting PageError on any page
795 will be ignored; simply unlock the page if an I/O error occurs.
796
797``readpages``
798 called by the VM to read pages associated with the address_space
799 object. This is essentially just a vector version of readpage.
800 Instead of just one page, several pages are requested.
801 readpages is only used for read-ahead, so read errors are
802 ignored. If anything goes wrong, feel free to give up.
803 This interface is deprecated and will be removed by the end of
804 2020; implement readahead instead.
805
806``write_begin``
807 Called by the generic buffered write code to ask the filesystem
808 to prepare to write len bytes at the given offset in the file.
809 The address_space should check that the write will be able to
810 complete, by allocating space if necessary and doing any other
811 internal housekeeping. If the write will update parts of any
812 basic-blocks on storage, then those blocks should be pre-read
813 (if they haven't been read already) so that the updated blocks
814 can be written out properly.
815
816 The filesystem must return the locked pagecache page for the
817 specified offset, in ``*pagep``, for the caller to write into.
818
819 It must be able to cope with short writes (where the length
820 passed to write_begin is greater than the number of bytes copied
821 into the page).
822
823 flags is a field for AOP_FLAG_xxx flags, described in
824 include/linux/fs.h.
825
826 A void * may be returned in fsdata, which then gets passed into
827 write_end.
828
829 Returns 0 on success; < 0 on failure (which is the error code),
830 in which case write_end is not called.
831
832``write_end``
833 After a successful write_begin, and data copy, write_end must be
834 called. len is the original len passed to write_begin, and
835 copied is the amount that was able to be copied.
836
837 The filesystem must take care of unlocking the page and
838 releasing it refcount, and updating i_size.
839
840 Returns < 0 on failure, otherwise the number of bytes (<=
841 'copied') that were able to be copied into pagecache.
842
843``bmap``
844 called by the VFS to map a logical block offset within object to
845 physical block number. This method is used by the FIBMAP ioctl
846 and for working with swap-files. To be able to swap to a file,
847 the file must have a stable mapping to a block device. The swap
848 system does not go through the filesystem but instead uses bmap
849 to find out where the blocks in the file are and uses those
850 addresses directly.
851
852``invalidatepage``
853 If a page has PagePrivate set, then invalidatepage will be
854 called when part or all of the page is to be removed from the
855 address space. This generally corresponds to either a
856 truncation, punch hole or a complete invalidation of the address
857 space (in the latter case 'offset' will always be 0 and 'length'
858 will be PAGE_SIZE). Any private data associated with the page
859 should be updated to reflect this truncation. If offset is 0
860 and length is PAGE_SIZE, then the private data should be
861 released, because the page must be able to be completely
862 discarded. This may be done by calling the ->releasepage
863 function, but in this case the release MUST succeed.
864
865``releasepage``
866 releasepage is called on PagePrivate pages to indicate that the
867 page should be freed if possible. ->releasepage should remove
868 any private data from the page and clear the PagePrivate flag.
869 If releasepage() fails for some reason, it must indicate failure
870 with a 0 return value. releasepage() is used in two distinct
871 though related cases. The first is when the VM finds a clean
872 page with no active users and wants to make it a free page. If
873 ->releasepage succeeds, the page will be removed from the
874 address_space and become free.
875
876 The second case is when a request has been made to invalidate
877 some or all pages in an address_space. This can happen through
878 the fadvise(POSIX_FADV_DONTNEED) system call or by the
879 filesystem explicitly requesting it as nfs and 9fs do (when they
880 believe the cache may be out of date with storage) by calling
881 invalidate_inode_pages2(). If the filesystem makes such a call,
882 and needs to be certain that all pages are invalidated, then its
883 releasepage will need to ensure this. Possibly it can clear the
884 PageUptodate bit if it cannot free private data yet.
885
886``freepage``
887 freepage is called once the page is no longer visible in the
888 page cache in order to allow the cleanup of any private data.
889 Since it may be called by the memory reclaimer, it should not
890 assume that the original address_space mapping still exists, and
891 it should not block.
892
893``direct_IO``
894 called by the generic read/write routines to perform direct_IO -
895 that is IO requests which bypass the page cache and transfer
896 data directly between the storage and the application's address
897 space.
898
899``isolate_page``
900 Called by the VM when isolating a movable non-lru page. If page
901 is successfully isolated, VM marks the page as PG_isolated via
902 __SetPageIsolated.
903
904``migrate_page``
905 This is used to compact the physical memory usage. If the VM
906 wants to relocate a page (maybe off a memory card that is
907 signalling imminent failure) it will pass a new page and an old
908 page to this function. migrate_page should transfer any private
909 data across and update any references that it has to the page.
910
911``putback_page``
912 Called by the VM when isolated page's migration fails.
913
914``launder_page``
915 Called before freeing a page - it writes back the dirty page.
916 To prevent redirtying the page, it is kept locked during the
917 whole operation.
918
919``is_partially_uptodate``
920 Called by the VM when reading a file through the pagecache when
921 the underlying blocksize != pagesize. If the required block is
922 up to date then the read can complete without needing the IO to
923 bring the whole page up to date.
924
925``is_dirty_writeback``
926 Called by the VM when attempting to reclaim a page. The VM uses
927 dirty and writeback information to determine if it needs to
928 stall to allow flushers a chance to complete some IO.
929 Ordinarily it can use PageDirty and PageWriteback but some
930 filesystems have more complex state (unstable pages in NFS
931 prevent reclaim) or do not set those flags due to locking
932 problems. This callback allows a filesystem to indicate to the
933 VM if a page should be treated as dirty or writeback for the
934 purposes of stalling.
935
936``error_remove_page``
937 normally set to generic_error_remove_page if truncation is ok
938 for this address space. Used for memory failure handling.
939 Setting this implies you deal with pages going away under you,
940 unless you have them locked or reference counts increased.
941
942``swap_activate``
943 Called when swapon is used on a file to allocate space if
944 necessary and pin the block lookup information in memory. A
945 return value of zero indicates success, in which case this file
946 can be used to back swapspace.
947
948``swap_deactivate``
949 Called during swapoff on files where swap_activate was
950 successful.
951
952
953The File Object
954===============
955
956A file object represents a file opened by a process. This is also known
957as an "open file description" in POSIX parlance.
958
959
960struct file_operations
961----------------------
962
963This describes how the VFS can manipulate an open file. As of kernel
9644.18, the following members are defined:
965
966.. code-block:: c
967
968 struct file_operations {
969 struct module *owner;
970 loff_t (*llseek) (struct file *, loff_t, int);
971 ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
972 ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
973 ssize_t (*read_iter) (struct kiocb *, struct iov_iter *);
974 ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
975 int (*iopoll)(struct kiocb *kiocb, bool spin);
976 int (*iterate) (struct file *, struct dir_context *);
977 int (*iterate_shared) (struct file *, struct dir_context *);
978 __poll_t (*poll) (struct file *, struct poll_table_struct *);
979 long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
980 long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
981 int (*mmap) (struct file *, struct vm_area_struct *);
982 int (*open) (struct inode *, struct file *);
983 int (*flush) (struct file *, fl_owner_t id);
984 int (*release) (struct inode *, struct file *);
985 int (*fsync) (struct file *, loff_t, loff_t, int datasync);
986 int (*fasync) (int, struct file *, int);
987 int (*lock) (struct file *, int, struct file_lock *);
988 ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);
989 unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
990 int (*check_flags)(int);
991 int (*flock) (struct file *, int, struct file_lock *);
992 ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int);
993 ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int);
994 int (*setlease)(struct file *, long, struct file_lock **, void **);
995 long (*fallocate)(struct file *file, int mode, loff_t offset,
996 loff_t len);
997 void (*show_fdinfo)(struct seq_file *m, struct file *f);
998 #ifndef CONFIG_MMU
999 unsigned (*mmap_capabilities)(struct file *);
1000 #endif
1001 ssize_t (*copy_file_range)(struct file *, loff_t, struct file *, loff_t, size_t, unsigned int);
1002 loff_t (*remap_file_range)(struct file *file_in, loff_t pos_in,
1003 struct file *file_out, loff_t pos_out,
1004 loff_t len, unsigned int remap_flags);
1005 int (*fadvise)(struct file *, loff_t, loff_t, int);
1006 };
1007
1008Again, all methods are called without any locks being held, unless
1009otherwise noted.
1010
1011``llseek``
1012 called when the VFS needs to move the file position index
1013
1014``read``
1015 called by read(2) and related system calls
1016
1017``read_iter``
1018 possibly asynchronous read with iov_iter as destination
1019
1020``write``
1021 called by write(2) and related system calls
1022
1023``write_iter``
1024 possibly asynchronous write with iov_iter as source
1025
1026``iopoll``
1027 called when aio wants to poll for completions on HIPRI iocbs
1028
1029``iterate``
1030 called when the VFS needs to read the directory contents
1031
1032``iterate_shared``
1033 called when the VFS needs to read the directory contents when
1034 filesystem supports concurrent dir iterators
1035
1036``poll``
1037 called by the VFS when a process wants to check if there is
1038 activity on this file and (optionally) go to sleep until there
1039 is activity. Called by the select(2) and poll(2) system calls
1040
1041``unlocked_ioctl``
1042 called by the ioctl(2) system call.
1043
1044``compat_ioctl``
1045 called by the ioctl(2) system call when 32 bit system calls are
1046 used on 64 bit kernels.
1047
1048``mmap``
1049 called by the mmap(2) system call
1050
1051``open``
1052 called by the VFS when an inode should be opened. When the VFS
1053 opens a file, it creates a new "struct file". It then calls the
1054 open method for the newly allocated file structure. You might
1055 think that the open method really belongs in "struct
1056 inode_operations", and you may be right. I think it's done the
1057 way it is because it makes filesystems simpler to implement.
1058 The open() method is a good place to initialize the
1059 "private_data" member in the file structure if you want to point
1060 to a device structure
1061
1062``flush``
1063 called by the close(2) system call to flush a file
1064
1065``release``
1066 called when the last reference to an open file is closed
1067
1068``fsync``
1069 called by the fsync(2) system call. Also see the section above
1070 entitled "Handling errors during writeback".
1071
1072``fasync``
1073 called by the fcntl(2) system call when asynchronous
1074 (non-blocking) mode is enabled for a file
1075
1076``lock``
1077 called by the fcntl(2) system call for F_GETLK, F_SETLK, and
1078 F_SETLKW commands
1079
1080``get_unmapped_area``
1081 called by the mmap(2) system call
1082
1083``check_flags``
1084 called by the fcntl(2) system call for F_SETFL command
1085
1086``flock``
1087 called by the flock(2) system call
1088
1089``splice_write``
1090 called by the VFS to splice data from a pipe to a file. This
1091 method is used by the splice(2) system call
1092
1093``splice_read``
1094 called by the VFS to splice data from file to a pipe. This
1095 method is used by the splice(2) system call
1096
1097``setlease``
1098 called by the VFS to set or release a file lock lease. setlease
1099 implementations should call generic_setlease to record or remove
1100 the lease in the inode after setting it.
1101
1102``fallocate``
1103 called by the VFS to preallocate blocks or punch a hole.
1104
1105``copy_file_range``
1106 called by the copy_file_range(2) system call.
1107
1108``remap_file_range``
1109 called by the ioctl(2) system call for FICLONERANGE and FICLONE
1110 and FIDEDUPERANGE commands to remap file ranges. An
1111 implementation should remap len bytes at pos_in of the source
1112 file into the dest file at pos_out. Implementations must handle
1113 callers passing in len == 0; this means "remap to the end of the
1114 source file". The return value should the number of bytes
1115 remapped, or the usual negative error code if errors occurred
1116 before any bytes were remapped. The remap_flags parameter
1117 accepts REMAP_FILE_* flags. If REMAP_FILE_DEDUP is set then the
1118 implementation must only remap if the requested file ranges have
1119 identical contents. If REMAP_FILE_CAN_SHORTEN is set, the caller is
1120 ok with the implementation shortening the request length to
1121 satisfy alignment or EOF requirements (or any other reason).
1122
1123``fadvise``
1124 possibly called by the fadvise64() system call.
1125
1126Note that the file operations are implemented by the specific
1127filesystem in which the inode resides. When opening a device node
1128(character or block special) most filesystems will call special
1129support routines in the VFS which will locate the required device
1130driver information. These support routines replace the filesystem file
1131operations with those for the device driver, and then proceed to call
1132the new open() method for the file. This is how opening a device file
1133in the filesystem eventually ends up calling the device driver open()
1134method.
1135
1136
1137Directory Entry Cache (dcache)
1138==============================
1139
1140
1141struct dentry_operations
1142------------------------
1143
1144This describes how a filesystem can overload the standard dentry
1145operations. Dentries and the dcache are the domain of the VFS and the
1146individual filesystem implementations. Device drivers have no business
1147here. These methods may be set to NULL, as they are either optional or
1148the VFS uses a default. As of kernel 2.6.22, the following members are
1149defined:
1150
1151.. code-block:: c
1152
1153 struct dentry_operations {
1154 int (*d_revalidate)(struct dentry *, unsigned int);
1155 int (*d_weak_revalidate)(struct dentry *, unsigned int);
1156 int (*d_hash)(const struct dentry *, struct qstr *);
1157 int (*d_compare)(const struct dentry *,
1158 unsigned int, const char *, const struct qstr *);
1159 int (*d_delete)(const struct dentry *);
1160 int (*d_init)(struct dentry *);
1161 void (*d_release)(struct dentry *);
1162 void (*d_iput)(struct dentry *, struct inode *);
1163 char *(*d_dname)(struct dentry *, char *, int);
1164 struct vfsmount *(*d_automount)(struct path *);
1165 int (*d_manage)(const struct path *, bool);
1166 struct dentry *(*d_real)(struct dentry *, const struct inode *);
1167 };
1168
1169``d_revalidate``
1170 called when the VFS needs to revalidate a dentry. This is
1171 called whenever a name look-up finds a dentry in the dcache.
1172 Most local filesystems leave this as NULL, because all their
1173 dentries in the dcache are valid. Network filesystems are
1174 different since things can change on the server without the
1175 client necessarily being aware of it.
1176
1177 This function should return a positive value if the dentry is
1178 still valid, and zero or a negative error code if it isn't.
1179
1180 d_revalidate may be called in rcu-walk mode (flags &
1181 LOOKUP_RCU). If in rcu-walk mode, the filesystem must
1182 revalidate the dentry without blocking or storing to the dentry,
1183 d_parent and d_inode should not be used without care (because
1184 they can change and, in d_inode case, even become NULL under
1185 us).
1186
1187 If a situation is encountered that rcu-walk cannot handle,
1188 return
1189 -ECHILD and it will be called again in ref-walk mode.
1190
1191``_weak_revalidate``
1192 called when the VFS needs to revalidate a "jumped" dentry. This
1193 is called when a path-walk ends at dentry that was not acquired
1194 by doing a lookup in the parent directory. This includes "/",
1195 "." and "..", as well as procfs-style symlinks and mountpoint
1196 traversal.
1197
1198 In this case, we are less concerned with whether the dentry is
1199 still fully correct, but rather that the inode is still valid.
1200 As with d_revalidate, most local filesystems will set this to
1201 NULL since their dcache entries are always valid.
1202
1203 This function has the same return code semantics as
1204 d_revalidate.
1205
1206 d_weak_revalidate is only called after leaving rcu-walk mode.
1207
1208``d_hash``
1209 called when the VFS adds a dentry to the hash table. The first
1210 dentry passed to d_hash is the parent directory that the name is
1211 to be hashed into.
1212
1213 Same locking and synchronisation rules as d_compare regarding
1214 what is safe to dereference etc.
1215
1216``d_compare``
1217 called to compare a dentry name with a given name. The first
1218 dentry is the parent of the dentry to be compared, the second is
1219 the child dentry. len and name string are properties of the
1220 dentry to be compared. qstr is the name to compare it with.
1221
1222 Must be constant and idempotent, and should not take locks if
1223 possible, and should not or store into the dentry. Should not
1224 dereference pointers outside the dentry without lots of care
1225 (eg. d_parent, d_inode, d_name should not be used).
1226
1227 However, our vfsmount is pinned, and RCU held, so the dentries
1228 and inodes won't disappear, neither will our sb or filesystem
1229 module. ->d_sb may be used.
1230
1231 It is a tricky calling convention because it needs to be called
1232 under "rcu-walk", ie. without any locks or references on things.
1233
1234``d_delete``
1235 called when the last reference to a dentry is dropped and the
1236 dcache is deciding whether or not to cache it. Return 1 to
1237 delete immediately, or 0 to cache the dentry. Default is NULL
1238 which means to always cache a reachable dentry. d_delete must
1239 be constant and idempotent.
1240
1241``d_init``
1242 called when a dentry is allocated
1243
1244``d_release``
1245 called when a dentry is really deallocated
1246
1247``d_iput``
1248 called when a dentry loses its inode (just prior to its being
1249 deallocated). The default when this is NULL is that the VFS
1250 calls iput(). If you define this method, you must call iput()
1251 yourself
1252
1253``d_dname``
1254 called when the pathname of a dentry should be generated.
1255 Useful for some pseudo filesystems (sockfs, pipefs, ...) to
1256 delay pathname generation. (Instead of doing it when dentry is
1257 created, it's done only when the path is needed.). Real
1258 filesystems probably dont want to use it, because their dentries
1259 are present in global dcache hash, so their hash should be an
1260 invariant. As no lock is held, d_dname() should not try to
1261 modify the dentry itself, unless appropriate SMP safety is used.
1262 CAUTION : d_path() logic is quite tricky. The correct way to
1263 return for example "Hello" is to put it at the end of the
1264 buffer, and returns a pointer to the first char.
1265 dynamic_dname() helper function is provided to take care of
1266 this.
1267
1268 Example :
1269
1270.. code-block:: c
1271
1272 static char *pipefs_dname(struct dentry *dent, char *buffer, int buflen)
1273 {
1274 return dynamic_dname(dentry, buffer, buflen, "pipe:[%lu]",
1275 dentry->d_inode->i_ino);
1276 }
1277
1278``d_automount``
1279 called when an automount dentry is to be traversed (optional).
1280 This should create a new VFS mount record and return the record
1281 to the caller. The caller is supplied with a path parameter
1282 giving the automount directory to describe the automount target
1283 and the parent VFS mount record to provide inheritable mount
1284 parameters. NULL should be returned if someone else managed to
1285 make the automount first. If the vfsmount creation failed, then
1286 an error code should be returned. If -EISDIR is returned, then
1287 the directory will be treated as an ordinary directory and
1288 returned to pathwalk to continue walking.
1289
1290 If a vfsmount is returned, the caller will attempt to mount it
1291 on the mountpoint and will remove the vfsmount from its
1292 expiration list in the case of failure. The vfsmount should be
1293 returned with 2 refs on it to prevent automatic expiration - the
1294 caller will clean up the additional ref.
1295
1296 This function is only used if DCACHE_NEED_AUTOMOUNT is set on
1297 the dentry. This is set by __d_instantiate() if S_AUTOMOUNT is
1298 set on the inode being added.
1299
1300``d_manage``
1301 called to allow the filesystem to manage the transition from a
1302 dentry (optional). This allows autofs, for example, to hold up
1303 clients waiting to explore behind a 'mountpoint' while letting
1304 the daemon go past and construct the subtree there. 0 should be
1305 returned to let the calling process continue. -EISDIR can be
1306 returned to tell pathwalk to use this directory as an ordinary
1307 directory and to ignore anything mounted on it and not to check
1308 the automount flag. Any other error code will abort pathwalk
1309 completely.
1310
1311 If the 'rcu_walk' parameter is true, then the caller is doing a
1312 pathwalk in RCU-walk mode. Sleeping is not permitted in this
1313 mode, and the caller can be asked to leave it and call again by
1314 returning -ECHILD. -EISDIR may also be returned to tell
1315 pathwalk to ignore d_automount or any mounts.
1316
1317 This function is only used if DCACHE_MANAGE_TRANSIT is set on
1318 the dentry being transited from.
1319
1320``d_real``
1321 overlay/union type filesystems implement this method to return
1322 one of the underlying dentries hidden by the overlay. It is
1323 used in two different modes:
1324
1325 Called from file_dentry() it returns the real dentry matching
1326 the inode argument. The real dentry may be from a lower layer
1327 already copied up, but still referenced from the file. This
1328 mode is selected with a non-NULL inode argument.
1329
1330 With NULL inode the topmost real underlying dentry is returned.
1331
1332Each dentry has a pointer to its parent dentry, as well as a hash list
1333of child dentries. Child dentries are basically like files in a
1334directory.
1335
1336
1337Directory Entry Cache API
1338--------------------------
1339
1340There are a number of functions defined which permit a filesystem to
1341manipulate dentries:
1342
1343``dget``
1344 open a new handle for an existing dentry (this just increments
1345 the usage count)
1346
1347``dput``
1348 close a handle for a dentry (decrements the usage count). If
1349 the usage count drops to 0, and the dentry is still in its
1350 parent's hash, the "d_delete" method is called to check whether
1351 it should be cached. If it should not be cached, or if the
1352 dentry is not hashed, it is deleted. Otherwise cached dentries
1353 are put into an LRU list to be reclaimed on memory shortage.
1354
1355``d_drop``
1356 this unhashes a dentry from its parents hash list. A subsequent
1357 call to dput() will deallocate the dentry if its usage count
1358 drops to 0
1359
1360``d_delete``
1361 delete a dentry. If there are no other open references to the
1362 dentry then the dentry is turned into a negative dentry (the
1363 d_iput() method is called). If there are other references, then
1364 d_drop() is called instead
1365
1366``d_add``
1367 add a dentry to its parents hash list and then calls
1368 d_instantiate()
1369
1370``d_instantiate``
1371 add a dentry to the alias hash list for the inode and updates
1372 the "d_inode" member. The "i_count" member in the inode
1373 structure should be set/incremented. If the inode pointer is
1374 NULL, the dentry is called a "negative dentry". This function
1375 is commonly called when an inode is created for an existing
1376 negative dentry
1377
1378``d_lookup``
1379 look up a dentry given its parent and path name component It
1380 looks up the child of that given name from the dcache hash
1381 table. If it is found, the reference count is incremented and
1382 the dentry is returned. The caller must use dput() to free the
1383 dentry when it finishes using it.
1384
1385
1386Mount Options
1387=============
1388
1389
1390Parsing options
1391---------------
1392
1393On mount and remount the filesystem is passed a string containing a
1394comma separated list of mount options. The options can have either of
1395these forms:
1396
1397 option
1398 option=value
1399
1400The <linux/parser.h> header defines an API that helps parse these
1401options. There are plenty of examples on how to use it in existing
1402filesystems.
1403
1404
1405Showing options
1406---------------
1407
1408If a filesystem accepts mount options, it must define show_options() to
1409show all the currently active options. The rules are:
1410
1411 - options MUST be shown which are not default or their values differ
1412 from the default
1413
1414 - options MAY be shown which are enabled by default or have their
1415 default value
1416
1417Options used only internally between a mount helper and the kernel (such
1418as file descriptors), or which only have an effect during the mounting
1419(such as ones controlling the creation of a journal) are exempt from the
1420above rules.
1421
1422The underlying reason for the above rules is to make sure, that a mount
1423can be accurately replicated (e.g. umounting and mounting again) based
1424on the information found in /proc/mounts.
1425
1426
1427Resources
1428=========
1429
1430(Note some of these resources are not up-to-date with the latest kernel
1431 version.)
1432
1433Creating Linux virtual filesystems. 2002
1434 <https://lwn.net/Articles/13325/>
1435
1436The Linux Virtual File-system Layer by Neil Brown. 1999
1437 <http://www.cse.unsw.edu.au/~neilb/oss/linux-commentary/vfs.html>
1438
1439A tour of the Linux VFS by Michael K. Johnson. 1996
1440 <https://www.tldp.org/LDP/khg/HyperNews/get/fs/vfstour.html>
1441
1442A small trail through the Linux kernel by Andries Brouwer. 2001
1443 <https://www.win.tue.nl/~aeb/linux/vfs/trail.html>