Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Generic USB driver for report based interrupt in/out devices
4 * like LD Didactic's USB devices. LD Didactic's USB devices are
5 * HID devices which do not use HID report definitons (they use
6 * raw interrupt in and our reports only for communication).
7 *
8 * This driver uses a ring buffer for time critical reading of
9 * interrupt in reports and provides read and write methods for
10 * raw interrupt reports (similar to the Windows HID driver).
11 * Devices based on the book USB COMPLETE by Jan Axelson may need
12 * such a compatibility to the Windows HID driver.
13 *
14 * Copyright (C) 2005 Michael Hund <mhund@ld-didactic.de>
15 *
16 * Derived from Lego USB Tower driver
17 * Copyright (C) 2003 David Glance <advidgsf@sourceforge.net>
18 * 2001-2004 Juergen Stuber <starblue@users.sourceforge.net>
19 */
20
21#include <linux/kernel.h>
22#include <linux/errno.h>
23#include <linux/slab.h>
24#include <linux/module.h>
25#include <linux/mutex.h>
26
27#include <linux/uaccess.h>
28#include <linux/input.h>
29#include <linux/usb.h>
30#include <linux/poll.h>
31
32/* Define these values to match your devices */
33#define USB_VENDOR_ID_LD 0x0f11 /* USB Vendor ID of LD Didactic GmbH */
34#define USB_DEVICE_ID_LD_CASSY 0x1000 /* USB Product ID of CASSY-S modules with 8 bytes endpoint size */
35#define USB_DEVICE_ID_LD_CASSY2 0x1001 /* USB Product ID of CASSY-S modules with 64 bytes endpoint size */
36#define USB_DEVICE_ID_LD_POCKETCASSY 0x1010 /* USB Product ID of Pocket-CASSY */
37#define USB_DEVICE_ID_LD_POCKETCASSY2 0x1011 /* USB Product ID of Pocket-CASSY 2 (reserved) */
38#define USB_DEVICE_ID_LD_MOBILECASSY 0x1020 /* USB Product ID of Mobile-CASSY */
39#define USB_DEVICE_ID_LD_MOBILECASSY2 0x1021 /* USB Product ID of Mobile-CASSY 2 (reserved) */
40#define USB_DEVICE_ID_LD_MICROCASSYVOLTAGE 0x1031 /* USB Product ID of Micro-CASSY Voltage */
41#define USB_DEVICE_ID_LD_MICROCASSYCURRENT 0x1032 /* USB Product ID of Micro-CASSY Current */
42#define USB_DEVICE_ID_LD_MICROCASSYTIME 0x1033 /* USB Product ID of Micro-CASSY Time (reserved) */
43#define USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE 0x1035 /* USB Product ID of Micro-CASSY Temperature */
44#define USB_DEVICE_ID_LD_MICROCASSYPH 0x1038 /* USB Product ID of Micro-CASSY pH */
45#define USB_DEVICE_ID_LD_POWERANALYSERCASSY 0x1040 /* USB Product ID of Power Analyser CASSY */
46#define USB_DEVICE_ID_LD_CONVERTERCONTROLLERCASSY 0x1042 /* USB Product ID of Converter Controller CASSY */
47#define USB_DEVICE_ID_LD_MACHINETESTCASSY 0x1043 /* USB Product ID of Machine Test CASSY */
48#define USB_DEVICE_ID_LD_JWM 0x1080 /* USB Product ID of Joule and Wattmeter */
49#define USB_DEVICE_ID_LD_DMMP 0x1081 /* USB Product ID of Digital Multimeter P (reserved) */
50#define USB_DEVICE_ID_LD_UMIP 0x1090 /* USB Product ID of UMI P */
51#define USB_DEVICE_ID_LD_UMIC 0x10A0 /* USB Product ID of UMI C */
52#define USB_DEVICE_ID_LD_UMIB 0x10B0 /* USB Product ID of UMI B */
53#define USB_DEVICE_ID_LD_XRAY 0x1100 /* USB Product ID of X-Ray Apparatus 55481 */
54#define USB_DEVICE_ID_LD_XRAY2 0x1101 /* USB Product ID of X-Ray Apparatus 554800 */
55#define USB_DEVICE_ID_LD_XRAYCT 0x1110 /* USB Product ID of X-Ray Apparatus CT 554821*/
56#define USB_DEVICE_ID_LD_VIDEOCOM 0x1200 /* USB Product ID of VideoCom */
57#define USB_DEVICE_ID_LD_MOTOR 0x1210 /* USB Product ID of Motor (reserved) */
58#define USB_DEVICE_ID_LD_COM3LAB 0x2000 /* USB Product ID of COM3LAB */
59#define USB_DEVICE_ID_LD_TELEPORT 0x2010 /* USB Product ID of Terminal Adapter */
60#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020 /* USB Product ID of Network Analyser */
61#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030 /* USB Product ID of Converter Control Unit */
62#define USB_DEVICE_ID_LD_MACHINETEST 0x2040 /* USB Product ID of Machine Test System */
63#define USB_DEVICE_ID_LD_MOSTANALYSER 0x2050 /* USB Product ID of MOST Protocol Analyser */
64#define USB_DEVICE_ID_LD_MOSTANALYSER2 0x2051 /* USB Product ID of MOST Protocol Analyser 2 */
65#define USB_DEVICE_ID_LD_ABSESP 0x2060 /* USB Product ID of ABS ESP */
66#define USB_DEVICE_ID_LD_AUTODATABUS 0x2070 /* USB Product ID of Automotive Data Buses */
67#define USB_DEVICE_ID_LD_MCT 0x2080 /* USB Product ID of Microcontroller technique */
68#define USB_DEVICE_ID_LD_HYBRID 0x2090 /* USB Product ID of Automotive Hybrid */
69#define USB_DEVICE_ID_LD_HEATCONTROL 0x20A0 /* USB Product ID of Heat control */
70
71#ifdef CONFIG_USB_DYNAMIC_MINORS
72#define USB_LD_MINOR_BASE 0
73#else
74#define USB_LD_MINOR_BASE 176
75#endif
76
77/* table of devices that work with this driver */
78static const struct usb_device_id ld_usb_table[] = {
79 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) },
80 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY2) },
81 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) },
82 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY2) },
83 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY) },
84 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY2) },
85 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYVOLTAGE) },
86 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYCURRENT) },
87 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTIME) },
88 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE) },
89 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYPH) },
90 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERANALYSERCASSY) },
91 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CONVERTERCONTROLLERCASSY) },
92 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETESTCASSY) },
93 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM) },
94 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP) },
95 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP) },
96 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIC) },
97 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIB) },
98 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY) },
99 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2) },
100 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM) },
101 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOTOR) },
102 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB) },
103 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT) },
104 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) },
105 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) },
106 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) },
107 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOSTANALYSER) },
108 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOSTANALYSER2) },
109 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_ABSESP) },
110 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_AUTODATABUS) },
111 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MCT) },
112 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
113 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
114 { } /* Terminating entry */
115};
116MODULE_DEVICE_TABLE(usb, ld_usb_table);
117MODULE_AUTHOR("Michael Hund <mhund@ld-didactic.de>");
118MODULE_DESCRIPTION("LD USB Driver");
119MODULE_LICENSE("GPL");
120MODULE_SUPPORTED_DEVICE("LD USB Devices");
121
122/* All interrupt in transfers are collected in a ring buffer to
123 * avoid racing conditions and get better performance of the driver.
124 */
125static int ring_buffer_size = 128;
126module_param(ring_buffer_size, int, 0000);
127MODULE_PARM_DESC(ring_buffer_size, "Read ring buffer size in reports");
128
129/* The write_buffer can contain more than one interrupt out transfer.
130 */
131static int write_buffer_size = 10;
132module_param(write_buffer_size, int, 0000);
133MODULE_PARM_DESC(write_buffer_size, "Write buffer size in reports");
134
135/* As of kernel version 2.6.4 ehci-hcd uses an
136 * "only one interrupt transfer per frame" shortcut
137 * to simplify the scheduling of periodic transfers.
138 * This conflicts with our standard 1ms intervals for in and out URBs.
139 * We use default intervals of 2ms for in and 2ms for out transfers,
140 * which should be fast enough.
141 * Increase the interval to allow more devices that do interrupt transfers,
142 * or set to 1 to use the standard interval from the endpoint descriptors.
143 */
144static int min_interrupt_in_interval = 2;
145module_param(min_interrupt_in_interval, int, 0000);
146MODULE_PARM_DESC(min_interrupt_in_interval, "Minimum interrupt in interval in ms");
147
148static int min_interrupt_out_interval = 2;
149module_param(min_interrupt_out_interval, int, 0000);
150MODULE_PARM_DESC(min_interrupt_out_interval, "Minimum interrupt out interval in ms");
151
152/* Structure to hold all of our device specific stuff */
153struct ld_usb {
154 struct mutex mutex; /* locks this structure */
155 struct usb_interface *intf; /* save off the usb interface pointer */
156 unsigned long disconnected:1;
157
158 int open_count; /* number of times this port has been opened */
159
160 char *ring_buffer;
161 unsigned int ring_head;
162 unsigned int ring_tail;
163
164 wait_queue_head_t read_wait;
165 wait_queue_head_t write_wait;
166
167 char *interrupt_in_buffer;
168 struct usb_endpoint_descriptor *interrupt_in_endpoint;
169 struct urb *interrupt_in_urb;
170 int interrupt_in_interval;
171 size_t interrupt_in_endpoint_size;
172 int interrupt_in_running;
173 int interrupt_in_done;
174 int buffer_overflow;
175 spinlock_t rbsl;
176
177 char *interrupt_out_buffer;
178 struct usb_endpoint_descriptor *interrupt_out_endpoint;
179 struct urb *interrupt_out_urb;
180 int interrupt_out_interval;
181 size_t interrupt_out_endpoint_size;
182 int interrupt_out_busy;
183};
184
185static struct usb_driver ld_usb_driver;
186
187/*
188 * ld_usb_abort_transfers
189 * aborts transfers and frees associated data structures
190 */
191static void ld_usb_abort_transfers(struct ld_usb *dev)
192{
193 /* shutdown transfer */
194 if (dev->interrupt_in_running) {
195 dev->interrupt_in_running = 0;
196 usb_kill_urb(dev->interrupt_in_urb);
197 }
198 if (dev->interrupt_out_busy)
199 usb_kill_urb(dev->interrupt_out_urb);
200}
201
202/*
203 * ld_usb_delete
204 */
205static void ld_usb_delete(struct ld_usb *dev)
206{
207 /* free data structures */
208 usb_free_urb(dev->interrupt_in_urb);
209 usb_free_urb(dev->interrupt_out_urb);
210 kfree(dev->ring_buffer);
211 kfree(dev->interrupt_in_buffer);
212 kfree(dev->interrupt_out_buffer);
213 kfree(dev);
214}
215
216/*
217 * ld_usb_interrupt_in_callback
218 */
219static void ld_usb_interrupt_in_callback(struct urb *urb)
220{
221 struct ld_usb *dev = urb->context;
222 size_t *actual_buffer;
223 unsigned int next_ring_head;
224 int status = urb->status;
225 unsigned long flags;
226 int retval;
227
228 if (status) {
229 if (status == -ENOENT ||
230 status == -ECONNRESET ||
231 status == -ESHUTDOWN) {
232 goto exit;
233 } else {
234 dev_dbg(&dev->intf->dev,
235 "%s: nonzero status received: %d\n", __func__,
236 status);
237 spin_lock_irqsave(&dev->rbsl, flags);
238 goto resubmit; /* maybe we can recover */
239 }
240 }
241
242 spin_lock_irqsave(&dev->rbsl, flags);
243 if (urb->actual_length > 0) {
244 next_ring_head = (dev->ring_head+1) % ring_buffer_size;
245 if (next_ring_head != dev->ring_tail) {
246 actual_buffer = (size_t *)(dev->ring_buffer + dev->ring_head * (sizeof(size_t)+dev->interrupt_in_endpoint_size));
247 /* actual_buffer gets urb->actual_length + interrupt_in_buffer */
248 *actual_buffer = urb->actual_length;
249 memcpy(actual_buffer+1, dev->interrupt_in_buffer, urb->actual_length);
250 dev->ring_head = next_ring_head;
251 dev_dbg(&dev->intf->dev, "%s: received %d bytes\n",
252 __func__, urb->actual_length);
253 } else {
254 dev_warn(&dev->intf->dev,
255 "Ring buffer overflow, %d bytes dropped\n",
256 urb->actual_length);
257 dev->buffer_overflow = 1;
258 }
259 }
260
261resubmit:
262 /* resubmit if we're still running */
263 if (dev->interrupt_in_running && !dev->buffer_overflow) {
264 retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC);
265 if (retval) {
266 dev_err(&dev->intf->dev,
267 "usb_submit_urb failed (%d)\n", retval);
268 dev->buffer_overflow = 1;
269 }
270 }
271 spin_unlock_irqrestore(&dev->rbsl, flags);
272exit:
273 dev->interrupt_in_done = 1;
274 wake_up_interruptible(&dev->read_wait);
275}
276
277/*
278 * ld_usb_interrupt_out_callback
279 */
280static void ld_usb_interrupt_out_callback(struct urb *urb)
281{
282 struct ld_usb *dev = urb->context;
283 int status = urb->status;
284
285 /* sync/async unlink faults aren't errors */
286 if (status && !(status == -ENOENT ||
287 status == -ECONNRESET ||
288 status == -ESHUTDOWN))
289 dev_dbg(&dev->intf->dev,
290 "%s - nonzero write interrupt status received: %d\n",
291 __func__, status);
292
293 dev->interrupt_out_busy = 0;
294 wake_up_interruptible(&dev->write_wait);
295}
296
297/*
298 * ld_usb_open
299 */
300static int ld_usb_open(struct inode *inode, struct file *file)
301{
302 struct ld_usb *dev;
303 int subminor;
304 int retval;
305 struct usb_interface *interface;
306
307 stream_open(inode, file);
308 subminor = iminor(inode);
309
310 interface = usb_find_interface(&ld_usb_driver, subminor);
311
312 if (!interface) {
313 printk(KERN_ERR "%s - error, can't find device for minor %d\n",
314 __func__, subminor);
315 return -ENODEV;
316 }
317
318 dev = usb_get_intfdata(interface);
319
320 if (!dev)
321 return -ENODEV;
322
323 /* lock this device */
324 if (mutex_lock_interruptible(&dev->mutex))
325 return -ERESTARTSYS;
326
327 /* allow opening only once */
328 if (dev->open_count) {
329 retval = -EBUSY;
330 goto unlock_exit;
331 }
332 dev->open_count = 1;
333
334 /* initialize in direction */
335 dev->ring_head = 0;
336 dev->ring_tail = 0;
337 dev->buffer_overflow = 0;
338 usb_fill_int_urb(dev->interrupt_in_urb,
339 interface_to_usbdev(interface),
340 usb_rcvintpipe(interface_to_usbdev(interface),
341 dev->interrupt_in_endpoint->bEndpointAddress),
342 dev->interrupt_in_buffer,
343 dev->interrupt_in_endpoint_size,
344 ld_usb_interrupt_in_callback,
345 dev,
346 dev->interrupt_in_interval);
347
348 dev->interrupt_in_running = 1;
349 dev->interrupt_in_done = 0;
350
351 retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
352 if (retval) {
353 dev_err(&interface->dev, "Couldn't submit interrupt_in_urb %d\n", retval);
354 dev->interrupt_in_running = 0;
355 dev->open_count = 0;
356 goto unlock_exit;
357 }
358
359 /* save device in the file's private structure */
360 file->private_data = dev;
361
362unlock_exit:
363 mutex_unlock(&dev->mutex);
364
365 return retval;
366}
367
368/*
369 * ld_usb_release
370 */
371static int ld_usb_release(struct inode *inode, struct file *file)
372{
373 struct ld_usb *dev;
374 int retval = 0;
375
376 dev = file->private_data;
377
378 if (dev == NULL) {
379 retval = -ENODEV;
380 goto exit;
381 }
382
383 mutex_lock(&dev->mutex);
384
385 if (dev->open_count != 1) {
386 retval = -ENODEV;
387 goto unlock_exit;
388 }
389 if (dev->disconnected) {
390 /* the device was unplugged before the file was released */
391 mutex_unlock(&dev->mutex);
392 /* unlock here as ld_usb_delete frees dev */
393 ld_usb_delete(dev);
394 goto exit;
395 }
396
397 /* wait until write transfer is finished */
398 if (dev->interrupt_out_busy)
399 wait_event_interruptible_timeout(dev->write_wait, !dev->interrupt_out_busy, 2 * HZ);
400 ld_usb_abort_transfers(dev);
401 dev->open_count = 0;
402
403unlock_exit:
404 mutex_unlock(&dev->mutex);
405
406exit:
407 return retval;
408}
409
410/*
411 * ld_usb_poll
412 */
413static __poll_t ld_usb_poll(struct file *file, poll_table *wait)
414{
415 struct ld_usb *dev;
416 __poll_t mask = 0;
417
418 dev = file->private_data;
419
420 if (dev->disconnected)
421 return EPOLLERR | EPOLLHUP;
422
423 poll_wait(file, &dev->read_wait, wait);
424 poll_wait(file, &dev->write_wait, wait);
425
426 if (dev->ring_head != dev->ring_tail)
427 mask |= EPOLLIN | EPOLLRDNORM;
428 if (!dev->interrupt_out_busy)
429 mask |= EPOLLOUT | EPOLLWRNORM;
430
431 return mask;
432}
433
434/*
435 * ld_usb_read
436 */
437static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
438 loff_t *ppos)
439{
440 struct ld_usb *dev;
441 size_t *actual_buffer;
442 size_t bytes_to_read;
443 int retval = 0;
444 int rv;
445
446 dev = file->private_data;
447
448 /* verify that we actually have some data to read */
449 if (count == 0)
450 goto exit;
451
452 /* lock this object */
453 if (mutex_lock_interruptible(&dev->mutex)) {
454 retval = -ERESTARTSYS;
455 goto exit;
456 }
457
458 /* verify that the device wasn't unplugged */
459 if (dev->disconnected) {
460 retval = -ENODEV;
461 printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
462 goto unlock_exit;
463 }
464
465 /* wait for data */
466 spin_lock_irq(&dev->rbsl);
467 while (dev->ring_head == dev->ring_tail) {
468 dev->interrupt_in_done = 0;
469 spin_unlock_irq(&dev->rbsl);
470 if (file->f_flags & O_NONBLOCK) {
471 retval = -EAGAIN;
472 goto unlock_exit;
473 }
474 retval = wait_event_interruptible(dev->read_wait, dev->interrupt_in_done);
475 if (retval < 0)
476 goto unlock_exit;
477
478 spin_lock_irq(&dev->rbsl);
479 }
480 spin_unlock_irq(&dev->rbsl);
481
482 /* actual_buffer contains actual_length + interrupt_in_buffer */
483 actual_buffer = (size_t *)(dev->ring_buffer + dev->ring_tail * (sizeof(size_t)+dev->interrupt_in_endpoint_size));
484 if (*actual_buffer > dev->interrupt_in_endpoint_size) {
485 retval = -EIO;
486 goto unlock_exit;
487 }
488 bytes_to_read = min(count, *actual_buffer);
489 if (bytes_to_read < *actual_buffer)
490 dev_warn(&dev->intf->dev, "Read buffer overflow, %zu bytes dropped\n",
491 *actual_buffer-bytes_to_read);
492
493 /* copy one interrupt_in_buffer from ring_buffer into userspace */
494 if (copy_to_user(buffer, actual_buffer+1, bytes_to_read)) {
495 retval = -EFAULT;
496 goto unlock_exit;
497 }
498 retval = bytes_to_read;
499
500 spin_lock_irq(&dev->rbsl);
501 dev->ring_tail = (dev->ring_tail + 1) % ring_buffer_size;
502
503 if (dev->buffer_overflow) {
504 dev->buffer_overflow = 0;
505 spin_unlock_irq(&dev->rbsl);
506 rv = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
507 if (rv < 0)
508 dev->buffer_overflow = 1;
509 } else {
510 spin_unlock_irq(&dev->rbsl);
511 }
512
513unlock_exit:
514 /* unlock the device */
515 mutex_unlock(&dev->mutex);
516
517exit:
518 return retval;
519}
520
521/*
522 * ld_usb_write
523 */
524static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
525 size_t count, loff_t *ppos)
526{
527 struct ld_usb *dev;
528 size_t bytes_to_write;
529 int retval = 0;
530
531 dev = file->private_data;
532
533 /* verify that we actually have some data to write */
534 if (count == 0)
535 goto exit;
536
537 /* lock this object */
538 if (mutex_lock_interruptible(&dev->mutex)) {
539 retval = -ERESTARTSYS;
540 goto exit;
541 }
542
543 /* verify that the device wasn't unplugged */
544 if (dev->disconnected) {
545 retval = -ENODEV;
546 printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
547 goto unlock_exit;
548 }
549
550 /* wait until previous transfer is finished */
551 if (dev->interrupt_out_busy) {
552 if (file->f_flags & O_NONBLOCK) {
553 retval = -EAGAIN;
554 goto unlock_exit;
555 }
556 retval = wait_event_interruptible(dev->write_wait, !dev->interrupt_out_busy);
557 if (retval < 0) {
558 goto unlock_exit;
559 }
560 }
561
562 /* write the data into interrupt_out_buffer from userspace */
563 bytes_to_write = min(count, write_buffer_size*dev->interrupt_out_endpoint_size);
564 if (bytes_to_write < count)
565 dev_warn(&dev->intf->dev, "Write buffer overflow, %zu bytes dropped\n",
566 count - bytes_to_write);
567 dev_dbg(&dev->intf->dev, "%s: count = %zu, bytes_to_write = %zu\n",
568 __func__, count, bytes_to_write);
569
570 if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) {
571 retval = -EFAULT;
572 goto unlock_exit;
573 }
574
575 if (dev->interrupt_out_endpoint == NULL) {
576 /* try HID_REQ_SET_REPORT=9 on control_endpoint instead of interrupt_out_endpoint */
577 retval = usb_control_msg(interface_to_usbdev(dev->intf),
578 usb_sndctrlpipe(interface_to_usbdev(dev->intf), 0),
579 9,
580 USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
581 1 << 8, 0,
582 dev->interrupt_out_buffer,
583 bytes_to_write,
584 USB_CTRL_SET_TIMEOUT);
585 if (retval < 0)
586 dev_err(&dev->intf->dev,
587 "Couldn't submit HID_REQ_SET_REPORT %d\n",
588 retval);
589 goto unlock_exit;
590 }
591
592 /* send off the urb */
593 usb_fill_int_urb(dev->interrupt_out_urb,
594 interface_to_usbdev(dev->intf),
595 usb_sndintpipe(interface_to_usbdev(dev->intf),
596 dev->interrupt_out_endpoint->bEndpointAddress),
597 dev->interrupt_out_buffer,
598 bytes_to_write,
599 ld_usb_interrupt_out_callback,
600 dev,
601 dev->interrupt_out_interval);
602
603 dev->interrupt_out_busy = 1;
604 wmb();
605
606 retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
607 if (retval) {
608 dev->interrupt_out_busy = 0;
609 dev_err(&dev->intf->dev,
610 "Couldn't submit interrupt_out_urb %d\n", retval);
611 goto unlock_exit;
612 }
613 retval = bytes_to_write;
614
615unlock_exit:
616 /* unlock the device */
617 mutex_unlock(&dev->mutex);
618
619exit:
620 return retval;
621}
622
623/* file operations needed when we register this driver */
624static const struct file_operations ld_usb_fops = {
625 .owner = THIS_MODULE,
626 .read = ld_usb_read,
627 .write = ld_usb_write,
628 .open = ld_usb_open,
629 .release = ld_usb_release,
630 .poll = ld_usb_poll,
631 .llseek = no_llseek,
632};
633
634/*
635 * usb class driver info in order to get a minor number from the usb core,
636 * and to have the device registered with the driver core
637 */
638static struct usb_class_driver ld_usb_class = {
639 .name = "ldusb%d",
640 .fops = &ld_usb_fops,
641 .minor_base = USB_LD_MINOR_BASE,
642};
643
644/*
645 * ld_usb_probe
646 *
647 * Called by the usb core when a new device is connected that it thinks
648 * this driver might be interested in.
649 */
650static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
651{
652 struct usb_device *udev = interface_to_usbdev(intf);
653 struct ld_usb *dev = NULL;
654 struct usb_host_interface *iface_desc;
655 char *buffer;
656 int retval = -ENOMEM;
657 int res;
658
659 /* allocate memory for our device state and initialize it */
660
661 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
662 if (!dev)
663 goto exit;
664 mutex_init(&dev->mutex);
665 spin_lock_init(&dev->rbsl);
666 dev->intf = intf;
667 init_waitqueue_head(&dev->read_wait);
668 init_waitqueue_head(&dev->write_wait);
669
670 /* workaround for early firmware versions on fast computers */
671 if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VENDOR_ID_LD) &&
672 ((le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_CASSY) ||
673 (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_COM3LAB)) &&
674 (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) {
675 buffer = kmalloc(256, GFP_KERNEL);
676 if (!buffer)
677 goto error;
678 /* usb_string makes SETUP+STALL to leave always ControlReadLoop */
679 usb_string(udev, 255, buffer, 256);
680 kfree(buffer);
681 }
682
683 iface_desc = intf->cur_altsetting;
684
685 res = usb_find_last_int_in_endpoint(iface_desc,
686 &dev->interrupt_in_endpoint);
687 if (res) {
688 dev_err(&intf->dev, "Interrupt in endpoint not found\n");
689 retval = res;
690 goto error;
691 }
692
693 res = usb_find_last_int_out_endpoint(iface_desc,
694 &dev->interrupt_out_endpoint);
695 if (res)
696 dev_warn(&intf->dev, "Interrupt out endpoint not found (using control endpoint instead)\n");
697
698 dev->interrupt_in_endpoint_size = usb_endpoint_maxp(dev->interrupt_in_endpoint);
699 dev->ring_buffer = kcalloc(ring_buffer_size,
700 sizeof(size_t) + dev->interrupt_in_endpoint_size,
701 GFP_KERNEL);
702 if (!dev->ring_buffer)
703 goto error;
704 dev->interrupt_in_buffer = kmalloc(dev->interrupt_in_endpoint_size, GFP_KERNEL);
705 if (!dev->interrupt_in_buffer)
706 goto error;
707 dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
708 if (!dev->interrupt_in_urb)
709 goto error;
710 dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? usb_endpoint_maxp(dev->interrupt_out_endpoint) :
711 udev->descriptor.bMaxPacketSize0;
712 dev->interrupt_out_buffer =
713 kmalloc_array(write_buffer_size,
714 dev->interrupt_out_endpoint_size, GFP_KERNEL);
715 if (!dev->interrupt_out_buffer)
716 goto error;
717 dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
718 if (!dev->interrupt_out_urb)
719 goto error;
720 dev->interrupt_in_interval = min_interrupt_in_interval > dev->interrupt_in_endpoint->bInterval ? min_interrupt_in_interval : dev->interrupt_in_endpoint->bInterval;
721 if (dev->interrupt_out_endpoint)
722 dev->interrupt_out_interval = min_interrupt_out_interval > dev->interrupt_out_endpoint->bInterval ? min_interrupt_out_interval : dev->interrupt_out_endpoint->bInterval;
723
724 /* we can register the device now, as it is ready */
725 usb_set_intfdata(intf, dev);
726
727 retval = usb_register_dev(intf, &ld_usb_class);
728 if (retval) {
729 /* something prevented us from registering this driver */
730 dev_err(&intf->dev, "Not able to get a minor for this device.\n");
731 usb_set_intfdata(intf, NULL);
732 goto error;
733 }
734
735 /* let the user know what node this device is now attached to */
736 dev_info(&intf->dev, "LD USB Device #%d now attached to major %d minor %d\n",
737 (intf->minor - USB_LD_MINOR_BASE), USB_MAJOR, intf->minor);
738
739exit:
740 return retval;
741
742error:
743 ld_usb_delete(dev);
744
745 return retval;
746}
747
748/*
749 * ld_usb_disconnect
750 *
751 * Called by the usb core when the device is removed from the system.
752 */
753static void ld_usb_disconnect(struct usb_interface *intf)
754{
755 struct ld_usb *dev;
756 int minor;
757
758 dev = usb_get_intfdata(intf);
759 usb_set_intfdata(intf, NULL);
760
761 minor = intf->minor;
762
763 /* give back our minor */
764 usb_deregister_dev(intf, &ld_usb_class);
765
766 usb_poison_urb(dev->interrupt_in_urb);
767 usb_poison_urb(dev->interrupt_out_urb);
768
769 mutex_lock(&dev->mutex);
770
771 /* if the device is not opened, then we clean up right now */
772 if (!dev->open_count) {
773 mutex_unlock(&dev->mutex);
774 ld_usb_delete(dev);
775 } else {
776 dev->disconnected = 1;
777 /* wake up pollers */
778 wake_up_interruptible_all(&dev->read_wait);
779 wake_up_interruptible_all(&dev->write_wait);
780 mutex_unlock(&dev->mutex);
781 }
782
783 dev_info(&intf->dev, "LD USB Device #%d now disconnected\n",
784 (minor - USB_LD_MINOR_BASE));
785}
786
787/* usb specific object needed to register this driver with the usb subsystem */
788static struct usb_driver ld_usb_driver = {
789 .name = "ldusb",
790 .probe = ld_usb_probe,
791 .disconnect = ld_usb_disconnect,
792 .id_table = ld_usb_table,
793};
794
795module_usb_driver(ld_usb_driver);
796
1/**
2 * Generic USB driver for report based interrupt in/out devices
3 * like LD Didactic's USB devices. LD Didactic's USB devices are
4 * HID devices which do not use HID report definitons (they use
5 * raw interrupt in and our reports only for communication).
6 *
7 * This driver uses a ring buffer for time critical reading of
8 * interrupt in reports and provides read and write methods for
9 * raw interrupt reports (similar to the Windows HID driver).
10 * Devices based on the book USB COMPLETE by Jan Axelson may need
11 * such a compatibility to the Windows HID driver.
12 *
13 * Copyright (C) 2005 Michael Hund <mhund@ld-didactic.de>
14 *
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License as
17 * published by the Free Software Foundation; either version 2 of
18 * the License, or (at your option) any later version.
19 *
20 * Derived from Lego USB Tower driver
21 * Copyright (C) 2003 David Glance <advidgsf@sourceforge.net>
22 * 2001-2004 Juergen Stuber <starblue@users.sourceforge.net>
23 */
24
25#include <linux/kernel.h>
26#include <linux/errno.h>
27#include <linux/slab.h>
28#include <linux/module.h>
29#include <linux/mutex.h>
30
31#include <asm/uaccess.h>
32#include <linux/input.h>
33#include <linux/usb.h>
34#include <linux/poll.h>
35
36/* Define these values to match your devices */
37#define USB_VENDOR_ID_LD 0x0f11 /* USB Vendor ID of LD Didactic GmbH */
38#define USB_DEVICE_ID_LD_CASSY 0x1000 /* USB Product ID of CASSY-S modules with 8 bytes endpoint size */
39#define USB_DEVICE_ID_LD_CASSY2 0x1001 /* USB Product ID of CASSY-S modules with 64 bytes endpoint size */
40#define USB_DEVICE_ID_LD_POCKETCASSY 0x1010 /* USB Product ID of Pocket-CASSY */
41#define USB_DEVICE_ID_LD_POCKETCASSY2 0x1011 /* USB Product ID of Pocket-CASSY 2 (reserved) */
42#define USB_DEVICE_ID_LD_MOBILECASSY 0x1020 /* USB Product ID of Mobile-CASSY */
43#define USB_DEVICE_ID_LD_MOBILECASSY2 0x1021 /* USB Product ID of Mobile-CASSY 2 (reserved) */
44#define USB_DEVICE_ID_LD_MICROCASSYVOLTAGE 0x1031 /* USB Product ID of Micro-CASSY Voltage */
45#define USB_DEVICE_ID_LD_MICROCASSYCURRENT 0x1032 /* USB Product ID of Micro-CASSY Current */
46#define USB_DEVICE_ID_LD_MICROCASSYTIME 0x1033 /* USB Product ID of Micro-CASSY Time (reserved) */
47#define USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE 0x1035 /* USB Product ID of Micro-CASSY Temperature */
48#define USB_DEVICE_ID_LD_MICROCASSYPH 0x1038 /* USB Product ID of Micro-CASSY pH */
49#define USB_DEVICE_ID_LD_JWM 0x1080 /* USB Product ID of Joule and Wattmeter */
50#define USB_DEVICE_ID_LD_DMMP 0x1081 /* USB Product ID of Digital Multimeter P (reserved) */
51#define USB_DEVICE_ID_LD_UMIP 0x1090 /* USB Product ID of UMI P */
52#define USB_DEVICE_ID_LD_UMIC 0x10A0 /* USB Product ID of UMI C */
53#define USB_DEVICE_ID_LD_UMIB 0x10B0 /* USB Product ID of UMI B */
54#define USB_DEVICE_ID_LD_XRAY 0x1100 /* USB Product ID of X-Ray Apparatus 55481 */
55#define USB_DEVICE_ID_LD_XRAY2 0x1101 /* USB Product ID of X-Ray Apparatus 554800 */
56#define USB_DEVICE_ID_LD_XRAYCT 0x1110 /* USB Product ID of X-Ray Apparatus CT 554821*/
57#define USB_DEVICE_ID_LD_VIDEOCOM 0x1200 /* USB Product ID of VideoCom */
58#define USB_DEVICE_ID_LD_MOTOR 0x1210 /* USB Product ID of Motor (reserved) */
59#define USB_DEVICE_ID_LD_COM3LAB 0x2000 /* USB Product ID of COM3LAB */
60#define USB_DEVICE_ID_LD_TELEPORT 0x2010 /* USB Product ID of Terminal Adapter */
61#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020 /* USB Product ID of Network Analyser */
62#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030 /* USB Product ID of Converter Control Unit */
63#define USB_DEVICE_ID_LD_MACHINETEST 0x2040 /* USB Product ID of Machine Test System */
64#define USB_DEVICE_ID_LD_MOSTANALYSER 0x2050 /* USB Product ID of MOST Protocol Analyser */
65#define USB_DEVICE_ID_LD_MOSTANALYSER2 0x2051 /* USB Product ID of MOST Protocol Analyser 2 */
66#define USB_DEVICE_ID_LD_ABSESP 0x2060 /* USB Product ID of ABS ESP */
67#define USB_DEVICE_ID_LD_AUTODATABUS 0x2070 /* USB Product ID of Automotive Data Buses */
68#define USB_DEVICE_ID_LD_MCT 0x2080 /* USB Product ID of Microcontroller technique */
69#define USB_DEVICE_ID_LD_HYBRID 0x2090 /* USB Product ID of Automotive Hybrid */
70#define USB_DEVICE_ID_LD_HEATCONTROL 0x20A0 /* USB Product ID of Heat control */
71
72#ifdef CONFIG_USB_DYNAMIC_MINORS
73#define USB_LD_MINOR_BASE 0
74#else
75#define USB_LD_MINOR_BASE 176
76#endif
77
78/* table of devices that work with this driver */
79static const struct usb_device_id ld_usb_table[] = {
80 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) },
81 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY2) },
82 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) },
83 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY2) },
84 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY) },
85 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY2) },
86 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYVOLTAGE) },
87 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYCURRENT) },
88 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTIME) },
89 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYTEMPERATURE) },
90 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MICROCASSYPH) },
91 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM) },
92 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP) },
93 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP) },
94 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIC) },
95 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIB) },
96 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY) },
97 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2) },
98 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM) },
99 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOTOR) },
100 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB) },
101 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT) },
102 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) },
103 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) },
104 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) },
105 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOSTANALYSER) },
106 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOSTANALYSER2) },
107 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_ABSESP) },
108 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_AUTODATABUS) },
109 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MCT) },
110 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
111 { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
112 { } /* Terminating entry */
113};
114MODULE_DEVICE_TABLE(usb, ld_usb_table);
115MODULE_VERSION("V0.14");
116MODULE_AUTHOR("Michael Hund <mhund@ld-didactic.de>");
117MODULE_DESCRIPTION("LD USB Driver");
118MODULE_LICENSE("GPL");
119MODULE_SUPPORTED_DEVICE("LD USB Devices");
120
121/* All interrupt in transfers are collected in a ring buffer to
122 * avoid racing conditions and get better performance of the driver.
123 */
124static int ring_buffer_size = 128;
125module_param(ring_buffer_size, int, 0);
126MODULE_PARM_DESC(ring_buffer_size, "Read ring buffer size in reports");
127
128/* The write_buffer can contain more than one interrupt out transfer.
129 */
130static int write_buffer_size = 10;
131module_param(write_buffer_size, int, 0);
132MODULE_PARM_DESC(write_buffer_size, "Write buffer size in reports");
133
134/* As of kernel version 2.6.4 ehci-hcd uses an
135 * "only one interrupt transfer per frame" shortcut
136 * to simplify the scheduling of periodic transfers.
137 * This conflicts with our standard 1ms intervals for in and out URBs.
138 * We use default intervals of 2ms for in and 2ms for out transfers,
139 * which should be fast enough.
140 * Increase the interval to allow more devices that do interrupt transfers,
141 * or set to 1 to use the standard interval from the endpoint descriptors.
142 */
143static int min_interrupt_in_interval = 2;
144module_param(min_interrupt_in_interval, int, 0);
145MODULE_PARM_DESC(min_interrupt_in_interval, "Minimum interrupt in interval in ms");
146
147static int min_interrupt_out_interval = 2;
148module_param(min_interrupt_out_interval, int, 0);
149MODULE_PARM_DESC(min_interrupt_out_interval, "Minimum interrupt out interval in ms");
150
151/* Structure to hold all of our device specific stuff */
152struct ld_usb {
153 struct mutex mutex; /* locks this structure */
154 struct usb_interface* intf; /* save off the usb interface pointer */
155
156 int open_count; /* number of times this port has been opened */
157
158 char* ring_buffer;
159 unsigned int ring_head;
160 unsigned int ring_tail;
161
162 wait_queue_head_t read_wait;
163 wait_queue_head_t write_wait;
164
165 char* interrupt_in_buffer;
166 struct usb_endpoint_descriptor* interrupt_in_endpoint;
167 struct urb* interrupt_in_urb;
168 int interrupt_in_interval;
169 size_t interrupt_in_endpoint_size;
170 int interrupt_in_running;
171 int interrupt_in_done;
172 int buffer_overflow;
173 spinlock_t rbsl;
174
175 char* interrupt_out_buffer;
176 struct usb_endpoint_descriptor* interrupt_out_endpoint;
177 struct urb* interrupt_out_urb;
178 int interrupt_out_interval;
179 size_t interrupt_out_endpoint_size;
180 int interrupt_out_busy;
181};
182
183static struct usb_driver ld_usb_driver;
184
185/**
186 * ld_usb_abort_transfers
187 * aborts transfers and frees associated data structures
188 */
189static void ld_usb_abort_transfers(struct ld_usb *dev)
190{
191 /* shutdown transfer */
192 if (dev->interrupt_in_running) {
193 dev->interrupt_in_running = 0;
194 if (dev->intf)
195 usb_kill_urb(dev->interrupt_in_urb);
196 }
197 if (dev->interrupt_out_busy)
198 if (dev->intf)
199 usb_kill_urb(dev->interrupt_out_urb);
200}
201
202/**
203 * ld_usb_delete
204 */
205static void ld_usb_delete(struct ld_usb *dev)
206{
207 ld_usb_abort_transfers(dev);
208
209 /* free data structures */
210 usb_free_urb(dev->interrupt_in_urb);
211 usb_free_urb(dev->interrupt_out_urb);
212 kfree(dev->ring_buffer);
213 kfree(dev->interrupt_in_buffer);
214 kfree(dev->interrupt_out_buffer);
215 kfree(dev);
216}
217
218/**
219 * ld_usb_interrupt_in_callback
220 */
221static void ld_usb_interrupt_in_callback(struct urb *urb)
222{
223 struct ld_usb *dev = urb->context;
224 size_t *actual_buffer;
225 unsigned int next_ring_head;
226 int status = urb->status;
227 int retval;
228
229 if (status) {
230 if (status == -ENOENT ||
231 status == -ECONNRESET ||
232 status == -ESHUTDOWN) {
233 goto exit;
234 } else {
235 dev_dbg(&dev->intf->dev,
236 "%s: nonzero status received: %d\n", __func__,
237 status);
238 spin_lock(&dev->rbsl);
239 goto resubmit; /* maybe we can recover */
240 }
241 }
242
243 spin_lock(&dev->rbsl);
244 if (urb->actual_length > 0) {
245 next_ring_head = (dev->ring_head+1) % ring_buffer_size;
246 if (next_ring_head != dev->ring_tail) {
247 actual_buffer = (size_t*)(dev->ring_buffer + dev->ring_head*(sizeof(size_t)+dev->interrupt_in_endpoint_size));
248 /* actual_buffer gets urb->actual_length + interrupt_in_buffer */
249 *actual_buffer = urb->actual_length;
250 memcpy(actual_buffer+1, dev->interrupt_in_buffer, urb->actual_length);
251 dev->ring_head = next_ring_head;
252 dev_dbg(&dev->intf->dev, "%s: received %d bytes\n",
253 __func__, urb->actual_length);
254 } else {
255 dev_warn(&dev->intf->dev,
256 "Ring buffer overflow, %d bytes dropped\n",
257 urb->actual_length);
258 dev->buffer_overflow = 1;
259 }
260 }
261
262resubmit:
263 /* resubmit if we're still running */
264 if (dev->interrupt_in_running && !dev->buffer_overflow && dev->intf) {
265 retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC);
266 if (retval) {
267 dev_err(&dev->intf->dev,
268 "usb_submit_urb failed (%d)\n", retval);
269 dev->buffer_overflow = 1;
270 }
271 }
272 spin_unlock(&dev->rbsl);
273exit:
274 dev->interrupt_in_done = 1;
275 wake_up_interruptible(&dev->read_wait);
276}
277
278/**
279 * ld_usb_interrupt_out_callback
280 */
281static void ld_usb_interrupt_out_callback(struct urb *urb)
282{
283 struct ld_usb *dev = urb->context;
284 int status = urb->status;
285
286 /* sync/async unlink faults aren't errors */
287 if (status && !(status == -ENOENT ||
288 status == -ECONNRESET ||
289 status == -ESHUTDOWN))
290 dev_dbg(&dev->intf->dev,
291 "%s - nonzero write interrupt status received: %d\n",
292 __func__, status);
293
294 dev->interrupt_out_busy = 0;
295 wake_up_interruptible(&dev->write_wait);
296}
297
298/**
299 * ld_usb_open
300 */
301static int ld_usb_open(struct inode *inode, struct file *file)
302{
303 struct ld_usb *dev;
304 int subminor;
305 int retval;
306 struct usb_interface *interface;
307
308 nonseekable_open(inode, file);
309 subminor = iminor(inode);
310
311 interface = usb_find_interface(&ld_usb_driver, subminor);
312
313 if (!interface) {
314 printk(KERN_ERR "%s - error, can't find device for minor %d\n",
315 __func__, subminor);
316 return -ENODEV;
317 }
318
319 dev = usb_get_intfdata(interface);
320
321 if (!dev)
322 return -ENODEV;
323
324 /* lock this device */
325 if (mutex_lock_interruptible(&dev->mutex))
326 return -ERESTARTSYS;
327
328 /* allow opening only once */
329 if (dev->open_count) {
330 retval = -EBUSY;
331 goto unlock_exit;
332 }
333 dev->open_count = 1;
334
335 /* initialize in direction */
336 dev->ring_head = 0;
337 dev->ring_tail = 0;
338 dev->buffer_overflow = 0;
339 usb_fill_int_urb(dev->interrupt_in_urb,
340 interface_to_usbdev(interface),
341 usb_rcvintpipe(interface_to_usbdev(interface),
342 dev->interrupt_in_endpoint->bEndpointAddress),
343 dev->interrupt_in_buffer,
344 dev->interrupt_in_endpoint_size,
345 ld_usb_interrupt_in_callback,
346 dev,
347 dev->interrupt_in_interval);
348
349 dev->interrupt_in_running = 1;
350 dev->interrupt_in_done = 0;
351
352 retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
353 if (retval) {
354 dev_err(&interface->dev, "Couldn't submit interrupt_in_urb %d\n", retval);
355 dev->interrupt_in_running = 0;
356 dev->open_count = 0;
357 goto unlock_exit;
358 }
359
360 /* save device in the file's private structure */
361 file->private_data = dev;
362
363unlock_exit:
364 mutex_unlock(&dev->mutex);
365
366 return retval;
367}
368
369/**
370 * ld_usb_release
371 */
372static int ld_usb_release(struct inode *inode, struct file *file)
373{
374 struct ld_usb *dev;
375 int retval = 0;
376
377 dev = file->private_data;
378
379 if (dev == NULL) {
380 retval = -ENODEV;
381 goto exit;
382 }
383
384 if (mutex_lock_interruptible(&dev->mutex)) {
385 retval = -ERESTARTSYS;
386 goto exit;
387 }
388
389 if (dev->open_count != 1) {
390 retval = -ENODEV;
391 goto unlock_exit;
392 }
393 if (dev->intf == NULL) {
394 /* the device was unplugged before the file was released */
395 mutex_unlock(&dev->mutex);
396 /* unlock here as ld_usb_delete frees dev */
397 ld_usb_delete(dev);
398 goto exit;
399 }
400
401 /* wait until write transfer is finished */
402 if (dev->interrupt_out_busy)
403 wait_event_interruptible_timeout(dev->write_wait, !dev->interrupt_out_busy, 2 * HZ);
404 ld_usb_abort_transfers(dev);
405 dev->open_count = 0;
406
407unlock_exit:
408 mutex_unlock(&dev->mutex);
409
410exit:
411 return retval;
412}
413
414/**
415 * ld_usb_poll
416 */
417static unsigned int ld_usb_poll(struct file *file, poll_table *wait)
418{
419 struct ld_usb *dev;
420 unsigned int mask = 0;
421
422 dev = file->private_data;
423
424 if (!dev->intf)
425 return POLLERR | POLLHUP;
426
427 poll_wait(file, &dev->read_wait, wait);
428 poll_wait(file, &dev->write_wait, wait);
429
430 if (dev->ring_head != dev->ring_tail)
431 mask |= POLLIN | POLLRDNORM;
432 if (!dev->interrupt_out_busy)
433 mask |= POLLOUT | POLLWRNORM;
434
435 return mask;
436}
437
438/**
439 * ld_usb_read
440 */
441static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
442 loff_t *ppos)
443{
444 struct ld_usb *dev;
445 size_t *actual_buffer;
446 size_t bytes_to_read;
447 int retval = 0;
448 int rv;
449
450 dev = file->private_data;
451
452 /* verify that we actually have some data to read */
453 if (count == 0)
454 goto exit;
455
456 /* lock this object */
457 if (mutex_lock_interruptible(&dev->mutex)) {
458 retval = -ERESTARTSYS;
459 goto exit;
460 }
461
462 /* verify that the device wasn't unplugged */
463 if (dev->intf == NULL) {
464 retval = -ENODEV;
465 printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
466 goto unlock_exit;
467 }
468
469 /* wait for data */
470 spin_lock_irq(&dev->rbsl);
471 if (dev->ring_head == dev->ring_tail) {
472 dev->interrupt_in_done = 0;
473 spin_unlock_irq(&dev->rbsl);
474 if (file->f_flags & O_NONBLOCK) {
475 retval = -EAGAIN;
476 goto unlock_exit;
477 }
478 retval = wait_event_interruptible(dev->read_wait, dev->interrupt_in_done);
479 if (retval < 0)
480 goto unlock_exit;
481 } else {
482 spin_unlock_irq(&dev->rbsl);
483 }
484
485 /* actual_buffer contains actual_length + interrupt_in_buffer */
486 actual_buffer = (size_t*)(dev->ring_buffer + dev->ring_tail*(sizeof(size_t)+dev->interrupt_in_endpoint_size));
487 bytes_to_read = min(count, *actual_buffer);
488 if (bytes_to_read < *actual_buffer)
489 dev_warn(&dev->intf->dev, "Read buffer overflow, %zd bytes dropped\n",
490 *actual_buffer-bytes_to_read);
491
492 /* copy one interrupt_in_buffer from ring_buffer into userspace */
493 if (copy_to_user(buffer, actual_buffer+1, bytes_to_read)) {
494 retval = -EFAULT;
495 goto unlock_exit;
496 }
497 dev->ring_tail = (dev->ring_tail+1) % ring_buffer_size;
498
499 retval = bytes_to_read;
500
501 spin_lock_irq(&dev->rbsl);
502 if (dev->buffer_overflow) {
503 dev->buffer_overflow = 0;
504 spin_unlock_irq(&dev->rbsl);
505 rv = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
506 if (rv < 0)
507 dev->buffer_overflow = 1;
508 } else {
509 spin_unlock_irq(&dev->rbsl);
510 }
511
512unlock_exit:
513 /* unlock the device */
514 mutex_unlock(&dev->mutex);
515
516exit:
517 return retval;
518}
519
520/**
521 * ld_usb_write
522 */
523static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
524 size_t count, loff_t *ppos)
525{
526 struct ld_usb *dev;
527 size_t bytes_to_write;
528 int retval = 0;
529
530 dev = file->private_data;
531
532 /* verify that we actually have some data to write */
533 if (count == 0)
534 goto exit;
535
536 /* lock this object */
537 if (mutex_lock_interruptible(&dev->mutex)) {
538 retval = -ERESTARTSYS;
539 goto exit;
540 }
541
542 /* verify that the device wasn't unplugged */
543 if (dev->intf == NULL) {
544 retval = -ENODEV;
545 printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
546 goto unlock_exit;
547 }
548
549 /* wait until previous transfer is finished */
550 if (dev->interrupt_out_busy) {
551 if (file->f_flags & O_NONBLOCK) {
552 retval = -EAGAIN;
553 goto unlock_exit;
554 }
555 retval = wait_event_interruptible(dev->write_wait, !dev->interrupt_out_busy);
556 if (retval < 0) {
557 goto unlock_exit;
558 }
559 }
560
561 /* write the data into interrupt_out_buffer from userspace */
562 bytes_to_write = min(count, write_buffer_size*dev->interrupt_out_endpoint_size);
563 if (bytes_to_write < count)
564 dev_warn(&dev->intf->dev, "Write buffer overflow, %zd bytes dropped\n",count-bytes_to_write);
565 dev_dbg(&dev->intf->dev, "%s: count = %zd, bytes_to_write = %zd\n",
566 __func__, count, bytes_to_write);
567
568 if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) {
569 retval = -EFAULT;
570 goto unlock_exit;
571 }
572
573 if (dev->interrupt_out_endpoint == NULL) {
574 /* try HID_REQ_SET_REPORT=9 on control_endpoint instead of interrupt_out_endpoint */
575 retval = usb_control_msg(interface_to_usbdev(dev->intf),
576 usb_sndctrlpipe(interface_to_usbdev(dev->intf), 0),
577 9,
578 USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
579 1 << 8, 0,
580 dev->interrupt_out_buffer,
581 bytes_to_write,
582 USB_CTRL_SET_TIMEOUT * HZ);
583 if (retval < 0)
584 dev_err(&dev->intf->dev,
585 "Couldn't submit HID_REQ_SET_REPORT %d\n",
586 retval);
587 goto unlock_exit;
588 }
589
590 /* send off the urb */
591 usb_fill_int_urb(dev->interrupt_out_urb,
592 interface_to_usbdev(dev->intf),
593 usb_sndintpipe(interface_to_usbdev(dev->intf),
594 dev->interrupt_out_endpoint->bEndpointAddress),
595 dev->interrupt_out_buffer,
596 bytes_to_write,
597 ld_usb_interrupt_out_callback,
598 dev,
599 dev->interrupt_out_interval);
600
601 dev->interrupt_out_busy = 1;
602 wmb();
603
604 retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
605 if (retval) {
606 dev->interrupt_out_busy = 0;
607 dev_err(&dev->intf->dev,
608 "Couldn't submit interrupt_out_urb %d\n", retval);
609 goto unlock_exit;
610 }
611 retval = bytes_to_write;
612
613unlock_exit:
614 /* unlock the device */
615 mutex_unlock(&dev->mutex);
616
617exit:
618 return retval;
619}
620
621/* file operations needed when we register this driver */
622static const struct file_operations ld_usb_fops = {
623 .owner = THIS_MODULE,
624 .read = ld_usb_read,
625 .write = ld_usb_write,
626 .open = ld_usb_open,
627 .release = ld_usb_release,
628 .poll = ld_usb_poll,
629 .llseek = no_llseek,
630};
631
632/*
633 * usb class driver info in order to get a minor number from the usb core,
634 * and to have the device registered with the driver core
635 */
636static struct usb_class_driver ld_usb_class = {
637 .name = "ldusb%d",
638 .fops = &ld_usb_fops,
639 .minor_base = USB_LD_MINOR_BASE,
640};
641
642/**
643 * ld_usb_probe
644 *
645 * Called by the usb core when a new device is connected that it thinks
646 * this driver might be interested in.
647 */
648static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
649{
650 struct usb_device *udev = interface_to_usbdev(intf);
651 struct ld_usb *dev = NULL;
652 struct usb_host_interface *iface_desc;
653 struct usb_endpoint_descriptor *endpoint;
654 char *buffer;
655 int i;
656 int retval = -ENOMEM;
657
658 /* allocate memory for our device state and initialize it */
659
660 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
661 if (dev == NULL) {
662 dev_err(&intf->dev, "Out of memory\n");
663 goto exit;
664 }
665 mutex_init(&dev->mutex);
666 spin_lock_init(&dev->rbsl);
667 dev->intf = intf;
668 init_waitqueue_head(&dev->read_wait);
669 init_waitqueue_head(&dev->write_wait);
670
671 /* workaround for early firmware versions on fast computers */
672 if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VENDOR_ID_LD) &&
673 ((le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_CASSY) ||
674 (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_COM3LAB)) &&
675 (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) {
676 buffer = kmalloc(256, GFP_KERNEL);
677 if (buffer == NULL) {
678 dev_err(&intf->dev, "Couldn't allocate string buffer\n");
679 goto error;
680 }
681 /* usb_string makes SETUP+STALL to leave always ControlReadLoop */
682 usb_string(udev, 255, buffer, 256);
683 kfree(buffer);
684 }
685
686 iface_desc = intf->cur_altsetting;
687
688 /* set up the endpoint information */
689 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
690 endpoint = &iface_desc->endpoint[i].desc;
691
692 if (usb_endpoint_is_int_in(endpoint))
693 dev->interrupt_in_endpoint = endpoint;
694
695 if (usb_endpoint_is_int_out(endpoint))
696 dev->interrupt_out_endpoint = endpoint;
697 }
698 if (dev->interrupt_in_endpoint == NULL) {
699 dev_err(&intf->dev, "Interrupt in endpoint not found\n");
700 goto error;
701 }
702 if (dev->interrupt_out_endpoint == NULL)
703 dev_warn(&intf->dev, "Interrupt out endpoint not found (using control endpoint instead)\n");
704
705 dev->interrupt_in_endpoint_size = usb_endpoint_maxp(dev->interrupt_in_endpoint);
706 dev->ring_buffer = kmalloc(ring_buffer_size*(sizeof(size_t)+dev->interrupt_in_endpoint_size), GFP_KERNEL);
707 if (!dev->ring_buffer) {
708 dev_err(&intf->dev, "Couldn't allocate ring_buffer\n");
709 goto error;
710 }
711 dev->interrupt_in_buffer = kmalloc(dev->interrupt_in_endpoint_size, GFP_KERNEL);
712 if (!dev->interrupt_in_buffer) {
713 dev_err(&intf->dev, "Couldn't allocate interrupt_in_buffer\n");
714 goto error;
715 }
716 dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
717 if (!dev->interrupt_in_urb) {
718 dev_err(&intf->dev, "Couldn't allocate interrupt_in_urb\n");
719 goto error;
720 }
721 dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? usb_endpoint_maxp(dev->interrupt_out_endpoint) :
722 udev->descriptor.bMaxPacketSize0;
723 dev->interrupt_out_buffer = kmalloc(write_buffer_size*dev->interrupt_out_endpoint_size, GFP_KERNEL);
724 if (!dev->interrupt_out_buffer) {
725 dev_err(&intf->dev, "Couldn't allocate interrupt_out_buffer\n");
726 goto error;
727 }
728 dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
729 if (!dev->interrupt_out_urb) {
730 dev_err(&intf->dev, "Couldn't allocate interrupt_out_urb\n");
731 goto error;
732 }
733 dev->interrupt_in_interval = min_interrupt_in_interval > dev->interrupt_in_endpoint->bInterval ? min_interrupt_in_interval : dev->interrupt_in_endpoint->bInterval;
734 if (dev->interrupt_out_endpoint)
735 dev->interrupt_out_interval = min_interrupt_out_interval > dev->interrupt_out_endpoint->bInterval ? min_interrupt_out_interval : dev->interrupt_out_endpoint->bInterval;
736
737 /* we can register the device now, as it is ready */
738 usb_set_intfdata(intf, dev);
739
740 retval = usb_register_dev(intf, &ld_usb_class);
741 if (retval) {
742 /* something prevented us from registering this driver */
743 dev_err(&intf->dev, "Not able to get a minor for this device.\n");
744 usb_set_intfdata(intf, NULL);
745 goto error;
746 }
747
748 /* let the user know what node this device is now attached to */
749 dev_info(&intf->dev, "LD USB Device #%d now attached to major %d minor %d\n",
750 (intf->minor - USB_LD_MINOR_BASE), USB_MAJOR, intf->minor);
751
752exit:
753 return retval;
754
755error:
756 ld_usb_delete(dev);
757
758 return retval;
759}
760
761/**
762 * ld_usb_disconnect
763 *
764 * Called by the usb core when the device is removed from the system.
765 */
766static void ld_usb_disconnect(struct usb_interface *intf)
767{
768 struct ld_usb *dev;
769 int minor;
770
771 dev = usb_get_intfdata(intf);
772 usb_set_intfdata(intf, NULL);
773
774 minor = intf->minor;
775
776 /* give back our minor */
777 usb_deregister_dev(intf, &ld_usb_class);
778
779 mutex_lock(&dev->mutex);
780
781 /* if the device is not opened, then we clean up right now */
782 if (!dev->open_count) {
783 mutex_unlock(&dev->mutex);
784 ld_usb_delete(dev);
785 } else {
786 dev->intf = NULL;
787 /* wake up pollers */
788 wake_up_interruptible_all(&dev->read_wait);
789 wake_up_interruptible_all(&dev->write_wait);
790 mutex_unlock(&dev->mutex);
791 }
792
793 dev_info(&intf->dev, "LD USB Device #%d now disconnected\n",
794 (minor - USB_LD_MINOR_BASE));
795}
796
797/* usb specific object needed to register this driver with the usb subsystem */
798static struct usb_driver ld_usb_driver = {
799 .name = "ldusb",
800 .probe = ld_usb_probe,
801 .disconnect = ld_usb_disconnect,
802 .id_table = ld_usb_table,
803};
804
805module_usb_driver(ld_usb_driver);
806