Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * adutux - driver for ADU devices from Ontrak Control Systems
4 * This is an experimental driver. Use at your own risk.
5 * This driver is not supported by Ontrak Control Systems.
6 *
7 * Copyright (c) 2003 John Homppi (SCO, leave this notice here)
8 *
9 * derived from the Lego USB Tower driver 0.56:
10 * Copyright (c) 2003 David Glance <davidgsf@sourceforge.net>
11 * 2001 Juergen Stuber <stuber@loria.fr>
12 * that was derived from USB Skeleton driver - 0.5
13 * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com)
14 *
15 */
16
17#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
18
19#include <linux/kernel.h>
20#include <linux/sched/signal.h>
21#include <linux/errno.h>
22#include <linux/slab.h>
23#include <linux/module.h>
24#include <linux/usb.h>
25#include <linux/mutex.h>
26#include <linux/uaccess.h>
27
28#define DRIVER_AUTHOR "John Homppi"
29#define DRIVER_DESC "adutux (see www.ontrak.net)"
30
31/* Define these values to match your device */
32#define ADU_VENDOR_ID 0x0a07
33#define ADU_PRODUCT_ID 0x0064
34
35/* table of devices that work with this driver */
36static const struct usb_device_id device_table[] = {
37 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID) }, /* ADU100 */
38 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) }, /* ADU120 */
39 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) }, /* ADU130 */
40 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+100) }, /* ADU200 */
41 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+108) }, /* ADU208 */
42 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+118) }, /* ADU218 */
43 { } /* Terminating entry */
44};
45
46MODULE_DEVICE_TABLE(usb, device_table);
47
48#ifdef CONFIG_USB_DYNAMIC_MINORS
49#define ADU_MINOR_BASE 0
50#else
51#define ADU_MINOR_BASE 67
52#endif
53
54/* we can have up to this number of device plugged in at once */
55#define MAX_DEVICES 16
56
57#define COMMAND_TIMEOUT (2*HZ)
58
59/*
60 * The locking scheme is a vanilla 3-lock:
61 * adu_device.buflock: A spinlock, covers what IRQs touch.
62 * adutux_mutex: A Static lock to cover open_count. It would also cover
63 * any globals, but we don't have them in 2.6.
64 * adu_device.mtx: A mutex to hold across sleepers like copy_from_user.
65 * It covers all of adu_device, except the open_count
66 * and what .buflock covers.
67 */
68
69/* Structure to hold all of our device specific stuff */
70struct adu_device {
71 struct mutex mtx;
72 struct usb_device *udev; /* save off the usb device pointer */
73 struct usb_interface *interface;
74 unsigned int minor; /* the starting minor number for this device */
75 char serial_number[8];
76
77 int open_count; /* number of times this port has been opened */
78 unsigned long disconnected:1;
79
80 char *read_buffer_primary;
81 int read_buffer_length;
82 char *read_buffer_secondary;
83 int secondary_head;
84 int secondary_tail;
85 spinlock_t buflock;
86
87 wait_queue_head_t read_wait;
88 wait_queue_head_t write_wait;
89
90 char *interrupt_in_buffer;
91 struct usb_endpoint_descriptor *interrupt_in_endpoint;
92 struct urb *interrupt_in_urb;
93 int read_urb_finished;
94
95 char *interrupt_out_buffer;
96 struct usb_endpoint_descriptor *interrupt_out_endpoint;
97 struct urb *interrupt_out_urb;
98 int out_urb_finished;
99};
100
101static DEFINE_MUTEX(adutux_mutex);
102
103static struct usb_driver adu_driver;
104
105static inline void adu_debug_data(struct device *dev, const char *function,
106 int size, const unsigned char *data)
107{
108 dev_dbg(dev, "%s - length = %d, data = %*ph\n",
109 function, size, size, data);
110}
111
112/*
113 * adu_abort_transfers
114 * aborts transfers and frees associated data structures
115 */
116static void adu_abort_transfers(struct adu_device *dev)
117{
118 unsigned long flags;
119
120 if (dev->disconnected)
121 return;
122
123 /* shutdown transfer */
124
125 /* XXX Anchor these instead */
126 spin_lock_irqsave(&dev->buflock, flags);
127 if (!dev->read_urb_finished) {
128 spin_unlock_irqrestore(&dev->buflock, flags);
129 usb_kill_urb(dev->interrupt_in_urb);
130 } else
131 spin_unlock_irqrestore(&dev->buflock, flags);
132
133 spin_lock_irqsave(&dev->buflock, flags);
134 if (!dev->out_urb_finished) {
135 spin_unlock_irqrestore(&dev->buflock, flags);
136 wait_event_timeout(dev->write_wait, dev->out_urb_finished,
137 COMMAND_TIMEOUT);
138 usb_kill_urb(dev->interrupt_out_urb);
139 } else
140 spin_unlock_irqrestore(&dev->buflock, flags);
141}
142
143static void adu_delete(struct adu_device *dev)
144{
145 /* free data structures */
146 usb_free_urb(dev->interrupt_in_urb);
147 usb_free_urb(dev->interrupt_out_urb);
148 kfree(dev->read_buffer_primary);
149 kfree(dev->read_buffer_secondary);
150 kfree(dev->interrupt_in_buffer);
151 kfree(dev->interrupt_out_buffer);
152 usb_put_dev(dev->udev);
153 kfree(dev);
154}
155
156static void adu_interrupt_in_callback(struct urb *urb)
157{
158 struct adu_device *dev = urb->context;
159 int status = urb->status;
160 unsigned long flags;
161
162 adu_debug_data(&dev->udev->dev, __func__,
163 urb->actual_length, urb->transfer_buffer);
164
165 spin_lock_irqsave(&dev->buflock, flags);
166
167 if (status != 0) {
168 if ((status != -ENOENT) && (status != -ECONNRESET) &&
169 (status != -ESHUTDOWN)) {
170 dev_dbg(&dev->udev->dev,
171 "%s : nonzero status received: %d\n",
172 __func__, status);
173 }
174 goto exit;
175 }
176
177 if (urb->actual_length > 0 && dev->interrupt_in_buffer[0] != 0x00) {
178 if (dev->read_buffer_length <
179 (4 * usb_endpoint_maxp(dev->interrupt_in_endpoint)) -
180 (urb->actual_length)) {
181 memcpy (dev->read_buffer_primary +
182 dev->read_buffer_length,
183 dev->interrupt_in_buffer, urb->actual_length);
184
185 dev->read_buffer_length += urb->actual_length;
186 dev_dbg(&dev->udev->dev,"%s reading %d\n", __func__,
187 urb->actual_length);
188 } else {
189 dev_dbg(&dev->udev->dev,"%s : read_buffer overflow\n",
190 __func__);
191 }
192 }
193
194exit:
195 dev->read_urb_finished = 1;
196 spin_unlock_irqrestore(&dev->buflock, flags);
197 /* always wake up so we recover from errors */
198 wake_up_interruptible(&dev->read_wait);
199}
200
201static void adu_interrupt_out_callback(struct urb *urb)
202{
203 struct adu_device *dev = urb->context;
204 int status = urb->status;
205 unsigned long flags;
206
207 adu_debug_data(&dev->udev->dev, __func__,
208 urb->actual_length, urb->transfer_buffer);
209
210 if (status != 0) {
211 if ((status != -ENOENT) &&
212 (status != -ECONNRESET)) {
213 dev_dbg(&dev->udev->dev,
214 "%s :nonzero status received: %d\n", __func__,
215 status);
216 }
217 return;
218 }
219
220 spin_lock_irqsave(&dev->buflock, flags);
221 dev->out_urb_finished = 1;
222 wake_up(&dev->write_wait);
223 spin_unlock_irqrestore(&dev->buflock, flags);
224}
225
226static int adu_open(struct inode *inode, struct file *file)
227{
228 struct adu_device *dev = NULL;
229 struct usb_interface *interface;
230 int subminor;
231 int retval;
232
233 subminor = iminor(inode);
234
235 retval = mutex_lock_interruptible(&adutux_mutex);
236 if (retval)
237 goto exit_no_lock;
238
239 interface = usb_find_interface(&adu_driver, subminor);
240 if (!interface) {
241 pr_err("%s - error, can't find device for minor %d\n",
242 __func__, subminor);
243 retval = -ENODEV;
244 goto exit_no_device;
245 }
246
247 dev = usb_get_intfdata(interface);
248 if (!dev) {
249 retval = -ENODEV;
250 goto exit_no_device;
251 }
252
253 /* check that nobody else is using the device */
254 if (dev->open_count) {
255 retval = -EBUSY;
256 goto exit_no_device;
257 }
258
259 ++dev->open_count;
260 dev_dbg(&dev->udev->dev, "%s: open count %d\n", __func__,
261 dev->open_count);
262
263 /* save device in the file's private structure */
264 file->private_data = dev;
265
266 /* initialize in direction */
267 dev->read_buffer_length = 0;
268
269 /* fixup first read by having urb waiting for it */
270 usb_fill_int_urb(dev->interrupt_in_urb, dev->udev,
271 usb_rcvintpipe(dev->udev,
272 dev->interrupt_in_endpoint->bEndpointAddress),
273 dev->interrupt_in_buffer,
274 usb_endpoint_maxp(dev->interrupt_in_endpoint),
275 adu_interrupt_in_callback, dev,
276 dev->interrupt_in_endpoint->bInterval);
277 dev->read_urb_finished = 0;
278 if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL))
279 dev->read_urb_finished = 1;
280 /* we ignore failure */
281 /* end of fixup for first read */
282
283 /* initialize out direction */
284 dev->out_urb_finished = 1;
285
286 retval = 0;
287
288exit_no_device:
289 mutex_unlock(&adutux_mutex);
290exit_no_lock:
291 return retval;
292}
293
294static void adu_release_internal(struct adu_device *dev)
295{
296 /* decrement our usage count for the device */
297 --dev->open_count;
298 dev_dbg(&dev->udev->dev, "%s : open count %d\n", __func__,
299 dev->open_count);
300 if (dev->open_count <= 0) {
301 adu_abort_transfers(dev);
302 dev->open_count = 0;
303 }
304}
305
306static int adu_release(struct inode *inode, struct file *file)
307{
308 struct adu_device *dev;
309 int retval = 0;
310
311 if (file == NULL) {
312 retval = -ENODEV;
313 goto exit;
314 }
315
316 dev = file->private_data;
317 if (dev == NULL) {
318 retval = -ENODEV;
319 goto exit;
320 }
321
322 mutex_lock(&adutux_mutex); /* not interruptible */
323
324 if (dev->open_count <= 0) {
325 dev_dbg(&dev->udev->dev, "%s : device not opened\n", __func__);
326 retval = -ENODEV;
327 goto unlock;
328 }
329
330 adu_release_internal(dev);
331 if (dev->disconnected) {
332 /* the device was unplugged before the file was released */
333 if (!dev->open_count) /* ... and we're the last user */
334 adu_delete(dev);
335 }
336unlock:
337 mutex_unlock(&adutux_mutex);
338exit:
339 return retval;
340}
341
342static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
343 loff_t *ppos)
344{
345 struct adu_device *dev;
346 size_t bytes_read = 0;
347 size_t bytes_to_read = count;
348 int retval = 0;
349 int timeout = 0;
350 int should_submit = 0;
351 unsigned long flags;
352 DECLARE_WAITQUEUE(wait, current);
353
354 dev = file->private_data;
355 if (mutex_lock_interruptible(&dev->mtx))
356 return -ERESTARTSYS;
357
358 /* verify that the device wasn't unplugged */
359 if (dev->disconnected) {
360 retval = -ENODEV;
361 pr_err("No device or device unplugged %d\n", retval);
362 goto exit;
363 }
364
365 /* verify that some data was requested */
366 if (count == 0) {
367 dev_dbg(&dev->udev->dev, "%s : read request of 0 bytes\n",
368 __func__);
369 goto exit;
370 }
371
372 timeout = COMMAND_TIMEOUT;
373 dev_dbg(&dev->udev->dev, "%s : about to start looping\n", __func__);
374 while (bytes_to_read) {
375 size_t data_in_secondary = dev->secondary_tail - dev->secondary_head;
376 dev_dbg(&dev->udev->dev,
377 "%s : while, data_in_secondary=%zu, status=%d\n",
378 __func__, data_in_secondary,
379 dev->interrupt_in_urb->status);
380
381 if (data_in_secondary) {
382 /* drain secondary buffer */
383 size_t amount = min(bytes_to_read, data_in_secondary);
384 if (copy_to_user(buffer, dev->read_buffer_secondary+dev->secondary_head, amount)) {
385 retval = -EFAULT;
386 goto exit;
387 }
388 dev->secondary_head += amount;
389 bytes_read += amount;
390 bytes_to_read -= amount;
391 } else {
392 /* we check the primary buffer */
393 spin_lock_irqsave (&dev->buflock, flags);
394 if (dev->read_buffer_length) {
395 /* we secure access to the primary */
396 char *tmp;
397 dev_dbg(&dev->udev->dev,
398 "%s : swap, read_buffer_length = %d\n",
399 __func__, dev->read_buffer_length);
400 tmp = dev->read_buffer_secondary;
401 dev->read_buffer_secondary = dev->read_buffer_primary;
402 dev->read_buffer_primary = tmp;
403 dev->secondary_head = 0;
404 dev->secondary_tail = dev->read_buffer_length;
405 dev->read_buffer_length = 0;
406 spin_unlock_irqrestore(&dev->buflock, flags);
407 /* we have a free buffer so use it */
408 should_submit = 1;
409 } else {
410 /* even the primary was empty - we may need to do IO */
411 if (!dev->read_urb_finished) {
412 /* somebody is doing IO */
413 spin_unlock_irqrestore(&dev->buflock, flags);
414 dev_dbg(&dev->udev->dev,
415 "%s : submitted already\n",
416 __func__);
417 } else {
418 /* we must initiate input */
419 dev_dbg(&dev->udev->dev,
420 "%s : initiate input\n",
421 __func__);
422 dev->read_urb_finished = 0;
423 spin_unlock_irqrestore(&dev->buflock, flags);
424
425 usb_fill_int_urb(dev->interrupt_in_urb, dev->udev,
426 usb_rcvintpipe(dev->udev,
427 dev->interrupt_in_endpoint->bEndpointAddress),
428 dev->interrupt_in_buffer,
429 usb_endpoint_maxp(dev->interrupt_in_endpoint),
430 adu_interrupt_in_callback,
431 dev,
432 dev->interrupt_in_endpoint->bInterval);
433 retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
434 if (retval) {
435 dev->read_urb_finished = 1;
436 if (retval == -ENOMEM) {
437 retval = bytes_read ? bytes_read : -ENOMEM;
438 }
439 dev_dbg(&dev->udev->dev,
440 "%s : submit failed\n",
441 __func__);
442 goto exit;
443 }
444 }
445
446 /* we wait for I/O to complete */
447 set_current_state(TASK_INTERRUPTIBLE);
448 add_wait_queue(&dev->read_wait, &wait);
449 spin_lock_irqsave(&dev->buflock, flags);
450 if (!dev->read_urb_finished) {
451 spin_unlock_irqrestore(&dev->buflock, flags);
452 timeout = schedule_timeout(COMMAND_TIMEOUT);
453 } else {
454 spin_unlock_irqrestore(&dev->buflock, flags);
455 set_current_state(TASK_RUNNING);
456 }
457 remove_wait_queue(&dev->read_wait, &wait);
458
459 if (timeout <= 0) {
460 dev_dbg(&dev->udev->dev,
461 "%s : timeout\n", __func__);
462 retval = bytes_read ? bytes_read : -ETIMEDOUT;
463 goto exit;
464 }
465
466 if (signal_pending(current)) {
467 dev_dbg(&dev->udev->dev,
468 "%s : signal pending\n",
469 __func__);
470 retval = bytes_read ? bytes_read : -EINTR;
471 goto exit;
472 }
473 }
474 }
475 }
476
477 retval = bytes_read;
478 /* if the primary buffer is empty then use it */
479 spin_lock_irqsave(&dev->buflock, flags);
480 if (should_submit && dev->read_urb_finished) {
481 dev->read_urb_finished = 0;
482 spin_unlock_irqrestore(&dev->buflock, flags);
483 usb_fill_int_urb(dev->interrupt_in_urb, dev->udev,
484 usb_rcvintpipe(dev->udev,
485 dev->interrupt_in_endpoint->bEndpointAddress),
486 dev->interrupt_in_buffer,
487 usb_endpoint_maxp(dev->interrupt_in_endpoint),
488 adu_interrupt_in_callback,
489 dev,
490 dev->interrupt_in_endpoint->bInterval);
491 if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL) != 0)
492 dev->read_urb_finished = 1;
493 /* we ignore failure */
494 } else {
495 spin_unlock_irqrestore(&dev->buflock, flags);
496 }
497
498exit:
499 /* unlock the device */
500 mutex_unlock(&dev->mtx);
501
502 return retval;
503}
504
505static ssize_t adu_write(struct file *file, const __user char *buffer,
506 size_t count, loff_t *ppos)
507{
508 DECLARE_WAITQUEUE(waita, current);
509 struct adu_device *dev;
510 size_t bytes_written = 0;
511 size_t bytes_to_write;
512 size_t buffer_size;
513 unsigned long flags;
514 int retval;
515
516 dev = file->private_data;
517
518 retval = mutex_lock_interruptible(&dev->mtx);
519 if (retval)
520 goto exit_nolock;
521
522 /* verify that the device wasn't unplugged */
523 if (dev->disconnected) {
524 retval = -ENODEV;
525 pr_err("No device or device unplugged %d\n", retval);
526 goto exit;
527 }
528
529 /* verify that we actually have some data to write */
530 if (count == 0) {
531 dev_dbg(&dev->udev->dev, "%s : write request of 0 bytes\n",
532 __func__);
533 goto exit;
534 }
535
536 while (count > 0) {
537 add_wait_queue(&dev->write_wait, &waita);
538 set_current_state(TASK_INTERRUPTIBLE);
539 spin_lock_irqsave(&dev->buflock, flags);
540 if (!dev->out_urb_finished) {
541 spin_unlock_irqrestore(&dev->buflock, flags);
542
543 mutex_unlock(&dev->mtx);
544 if (signal_pending(current)) {
545 dev_dbg(&dev->udev->dev, "%s : interrupted\n",
546 __func__);
547 set_current_state(TASK_RUNNING);
548 retval = -EINTR;
549 goto exit_onqueue;
550 }
551 if (schedule_timeout(COMMAND_TIMEOUT) == 0) {
552 dev_dbg(&dev->udev->dev,
553 "%s - command timed out.\n", __func__);
554 retval = -ETIMEDOUT;
555 goto exit_onqueue;
556 }
557 remove_wait_queue(&dev->write_wait, &waita);
558 retval = mutex_lock_interruptible(&dev->mtx);
559 if (retval) {
560 retval = bytes_written ? bytes_written : retval;
561 goto exit_nolock;
562 }
563
564 dev_dbg(&dev->udev->dev,
565 "%s : in progress, count = %zd\n",
566 __func__, count);
567 } else {
568 spin_unlock_irqrestore(&dev->buflock, flags);
569 set_current_state(TASK_RUNNING);
570 remove_wait_queue(&dev->write_wait, &waita);
571 dev_dbg(&dev->udev->dev, "%s : sending, count = %zd\n",
572 __func__, count);
573
574 /* write the data into interrupt_out_buffer from userspace */
575 buffer_size = usb_endpoint_maxp(dev->interrupt_out_endpoint);
576 bytes_to_write = count > buffer_size ? buffer_size : count;
577 dev_dbg(&dev->udev->dev,
578 "%s : buffer_size = %zd, count = %zd, bytes_to_write = %zd\n",
579 __func__, buffer_size, count, bytes_to_write);
580
581 if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write) != 0) {
582 retval = -EFAULT;
583 goto exit;
584 }
585
586 /* send off the urb */
587 usb_fill_int_urb(
588 dev->interrupt_out_urb,
589 dev->udev,
590 usb_sndintpipe(dev->udev, dev->interrupt_out_endpoint->bEndpointAddress),
591 dev->interrupt_out_buffer,
592 bytes_to_write,
593 adu_interrupt_out_callback,
594 dev,
595 dev->interrupt_out_endpoint->bInterval);
596 dev->interrupt_out_urb->actual_length = bytes_to_write;
597 dev->out_urb_finished = 0;
598 retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
599 if (retval < 0) {
600 dev->out_urb_finished = 1;
601 dev_err(&dev->udev->dev, "Couldn't submit "
602 "interrupt_out_urb %d\n", retval);
603 goto exit;
604 }
605
606 buffer += bytes_to_write;
607 count -= bytes_to_write;
608
609 bytes_written += bytes_to_write;
610 }
611 }
612 mutex_unlock(&dev->mtx);
613 return bytes_written;
614
615exit:
616 mutex_unlock(&dev->mtx);
617exit_nolock:
618 return retval;
619
620exit_onqueue:
621 remove_wait_queue(&dev->write_wait, &waita);
622 return retval;
623}
624
625/* file operations needed when we register this driver */
626static const struct file_operations adu_fops = {
627 .owner = THIS_MODULE,
628 .read = adu_read,
629 .write = adu_write,
630 .open = adu_open,
631 .release = adu_release,
632 .llseek = noop_llseek,
633};
634
635/*
636 * usb class driver info in order to get a minor number from the usb core,
637 * and to have the device registered with devfs and the driver core
638 */
639static struct usb_class_driver adu_class = {
640 .name = "usb/adutux%d",
641 .fops = &adu_fops,
642 .minor_base = ADU_MINOR_BASE,
643};
644
645/*
646 * adu_probe
647 *
648 * Called by the usb core when a new device is connected that it thinks
649 * this driver might be interested in.
650 */
651static int adu_probe(struct usb_interface *interface,
652 const struct usb_device_id *id)
653{
654 struct usb_device *udev = interface_to_usbdev(interface);
655 struct adu_device *dev = NULL;
656 int retval = -ENOMEM;
657 int in_end_size;
658 int out_end_size;
659 int res;
660
661 /* allocate memory for our device state and initialize it */
662 dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL);
663 if (!dev)
664 return -ENOMEM;
665
666 mutex_init(&dev->mtx);
667 spin_lock_init(&dev->buflock);
668 dev->udev = usb_get_dev(udev);
669 init_waitqueue_head(&dev->read_wait);
670 init_waitqueue_head(&dev->write_wait);
671
672 res = usb_find_common_endpoints_reverse(interface->cur_altsetting,
673 NULL, NULL,
674 &dev->interrupt_in_endpoint,
675 &dev->interrupt_out_endpoint);
676 if (res) {
677 dev_err(&interface->dev, "interrupt endpoints not found\n");
678 retval = res;
679 goto error;
680 }
681
682 in_end_size = usb_endpoint_maxp(dev->interrupt_in_endpoint);
683 out_end_size = usb_endpoint_maxp(dev->interrupt_out_endpoint);
684
685 dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL);
686 if (!dev->read_buffer_primary)
687 goto error;
688
689 /* debug code prime the buffer */
690 memset(dev->read_buffer_primary, 'a', in_end_size);
691 memset(dev->read_buffer_primary + in_end_size, 'b', in_end_size);
692 memset(dev->read_buffer_primary + (2 * in_end_size), 'c', in_end_size);
693 memset(dev->read_buffer_primary + (3 * in_end_size), 'd', in_end_size);
694
695 dev->read_buffer_secondary = kmalloc((4 * in_end_size), GFP_KERNEL);
696 if (!dev->read_buffer_secondary)
697 goto error;
698
699 /* debug code prime the buffer */
700 memset(dev->read_buffer_secondary, 'e', in_end_size);
701 memset(dev->read_buffer_secondary + in_end_size, 'f', in_end_size);
702 memset(dev->read_buffer_secondary + (2 * in_end_size), 'g', in_end_size);
703 memset(dev->read_buffer_secondary + (3 * in_end_size), 'h', in_end_size);
704
705 dev->interrupt_in_buffer = kmalloc(in_end_size, GFP_KERNEL);
706 if (!dev->interrupt_in_buffer)
707 goto error;
708
709 /* debug code prime the buffer */
710 memset(dev->interrupt_in_buffer, 'i', in_end_size);
711
712 dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
713 if (!dev->interrupt_in_urb)
714 goto error;
715 dev->interrupt_out_buffer = kmalloc(out_end_size, GFP_KERNEL);
716 if (!dev->interrupt_out_buffer)
717 goto error;
718 dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
719 if (!dev->interrupt_out_urb)
720 goto error;
721
722 if (!usb_string(udev, udev->descriptor.iSerialNumber, dev->serial_number,
723 sizeof(dev->serial_number))) {
724 dev_err(&interface->dev, "Could not retrieve serial number\n");
725 retval = -EIO;
726 goto error;
727 }
728 dev_dbg(&interface->dev,"serial_number=%s", dev->serial_number);
729
730 /* we can register the device now, as it is ready */
731 usb_set_intfdata(interface, dev);
732
733 retval = usb_register_dev(interface, &adu_class);
734
735 if (retval) {
736 /* something prevented us from registering this driver */
737 dev_err(&interface->dev, "Not able to get a minor for this device.\n");
738 usb_set_intfdata(interface, NULL);
739 goto error;
740 }
741
742 dev->minor = interface->minor;
743
744 /* let the user know what node this device is now attached to */
745 dev_info(&interface->dev, "ADU%d %s now attached to /dev/usb/adutux%d\n",
746 le16_to_cpu(udev->descriptor.idProduct), dev->serial_number,
747 (dev->minor - ADU_MINOR_BASE));
748
749 return 0;
750
751error:
752 adu_delete(dev);
753 return retval;
754}
755
756/*
757 * adu_disconnect
758 *
759 * Called by the usb core when the device is removed from the system.
760 */
761static void adu_disconnect(struct usb_interface *interface)
762{
763 struct adu_device *dev;
764
765 dev = usb_get_intfdata(interface);
766
767 usb_deregister_dev(interface, &adu_class);
768
769 usb_poison_urb(dev->interrupt_in_urb);
770 usb_poison_urb(dev->interrupt_out_urb);
771
772 mutex_lock(&adutux_mutex);
773 usb_set_intfdata(interface, NULL);
774
775 mutex_lock(&dev->mtx); /* not interruptible */
776 dev->disconnected = 1;
777 mutex_unlock(&dev->mtx);
778
779 /* if the device is not opened, then we clean up right now */
780 if (!dev->open_count)
781 adu_delete(dev);
782
783 mutex_unlock(&adutux_mutex);
784}
785
786/* usb specific object needed to register this driver with the usb subsystem */
787static struct usb_driver adu_driver = {
788 .name = "adutux",
789 .probe = adu_probe,
790 .disconnect = adu_disconnect,
791 .id_table = device_table,
792};
793
794module_usb_driver(adu_driver);
795
796MODULE_AUTHOR(DRIVER_AUTHOR);
797MODULE_DESCRIPTION(DRIVER_DESC);
798MODULE_LICENSE("GPL");
1/*
2 * adutux - driver for ADU devices from Ontrak Control Systems
3 * This is an experimental driver. Use at your own risk.
4 * This driver is not supported by Ontrak Control Systems.
5 *
6 * Copyright (c) 2003 John Homppi (SCO, leave this notice here)
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * derived from the Lego USB Tower driver 0.56:
14 * Copyright (c) 2003 David Glance <davidgsf@sourceforge.net>
15 * 2001 Juergen Stuber <stuber@loria.fr>
16 * that was derived from USB Skeleton driver - 0.5
17 * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com)
18 *
19 */
20
21#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
22
23#include <linux/kernel.h>
24#include <linux/errno.h>
25#include <linux/slab.h>
26#include <linux/module.h>
27#include <linux/usb.h>
28#include <linux/mutex.h>
29#include <linux/uaccess.h>
30
31/* Version Information */
32#define DRIVER_VERSION "v0.0.13"
33#define DRIVER_AUTHOR "John Homppi"
34#define DRIVER_DESC "adutux (see www.ontrak.net)"
35
36/* Define these values to match your device */
37#define ADU_VENDOR_ID 0x0a07
38#define ADU_PRODUCT_ID 0x0064
39
40/* table of devices that work with this driver */
41static const struct usb_device_id device_table[] = {
42 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID) }, /* ADU100 */
43 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) }, /* ADU120 */
44 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) }, /* ADU130 */
45 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+100) }, /* ADU200 */
46 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+108) }, /* ADU208 */
47 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+118) }, /* ADU218 */
48 { } /* Terminating entry */
49};
50
51MODULE_DEVICE_TABLE(usb, device_table);
52
53#ifdef CONFIG_USB_DYNAMIC_MINORS
54#define ADU_MINOR_BASE 0
55#else
56#define ADU_MINOR_BASE 67
57#endif
58
59/* we can have up to this number of device plugged in at once */
60#define MAX_DEVICES 16
61
62#define COMMAND_TIMEOUT (2*HZ) /* 60 second timeout for a command */
63
64/*
65 * The locking scheme is a vanilla 3-lock:
66 * adu_device.buflock: A spinlock, covers what IRQs touch.
67 * adutux_mutex: A Static lock to cover open_count. It would also cover
68 * any globals, but we don't have them in 2.6.
69 * adu_device.mtx: A mutex to hold across sleepers like copy_from_user.
70 * It covers all of adu_device, except the open_count
71 * and what .buflock covers.
72 */
73
74/* Structure to hold all of our device specific stuff */
75struct adu_device {
76 struct mutex mtx;
77 struct usb_device *udev; /* save off the usb device pointer */
78 struct usb_interface *interface;
79 unsigned int minor; /* the starting minor number for this device */
80 char serial_number[8];
81
82 int open_count; /* number of times this port has been opened */
83
84 char *read_buffer_primary;
85 int read_buffer_length;
86 char *read_buffer_secondary;
87 int secondary_head;
88 int secondary_tail;
89 spinlock_t buflock;
90
91 wait_queue_head_t read_wait;
92 wait_queue_head_t write_wait;
93
94 char *interrupt_in_buffer;
95 struct usb_endpoint_descriptor *interrupt_in_endpoint;
96 struct urb *interrupt_in_urb;
97 int read_urb_finished;
98
99 char *interrupt_out_buffer;
100 struct usb_endpoint_descriptor *interrupt_out_endpoint;
101 struct urb *interrupt_out_urb;
102 int out_urb_finished;
103};
104
105static DEFINE_MUTEX(adutux_mutex);
106
107static struct usb_driver adu_driver;
108
109static inline void adu_debug_data(struct device *dev, const char *function,
110 int size, const unsigned char *data)
111{
112 dev_dbg(dev, "%s - length = %d, data = %*ph\n",
113 function, size, size, data);
114}
115
116/**
117 * adu_abort_transfers
118 * aborts transfers and frees associated data structures
119 */
120static void adu_abort_transfers(struct adu_device *dev)
121{
122 unsigned long flags;
123
124 if (dev->udev == NULL)
125 return;
126
127 /* shutdown transfer */
128
129 /* XXX Anchor these instead */
130 spin_lock_irqsave(&dev->buflock, flags);
131 if (!dev->read_urb_finished) {
132 spin_unlock_irqrestore(&dev->buflock, flags);
133 usb_kill_urb(dev->interrupt_in_urb);
134 } else
135 spin_unlock_irqrestore(&dev->buflock, flags);
136
137 spin_lock_irqsave(&dev->buflock, flags);
138 if (!dev->out_urb_finished) {
139 spin_unlock_irqrestore(&dev->buflock, flags);
140 usb_kill_urb(dev->interrupt_out_urb);
141 } else
142 spin_unlock_irqrestore(&dev->buflock, flags);
143}
144
145static void adu_delete(struct adu_device *dev)
146{
147 /* free data structures */
148 usb_free_urb(dev->interrupt_in_urb);
149 usb_free_urb(dev->interrupt_out_urb);
150 kfree(dev->read_buffer_primary);
151 kfree(dev->read_buffer_secondary);
152 kfree(dev->interrupt_in_buffer);
153 kfree(dev->interrupt_out_buffer);
154 kfree(dev);
155}
156
157static void adu_interrupt_in_callback(struct urb *urb)
158{
159 struct adu_device *dev = urb->context;
160 int status = urb->status;
161
162 adu_debug_data(&dev->udev->dev, __func__,
163 urb->actual_length, urb->transfer_buffer);
164
165 spin_lock(&dev->buflock);
166
167 if (status != 0) {
168 if ((status != -ENOENT) && (status != -ECONNRESET) &&
169 (status != -ESHUTDOWN)) {
170 dev_dbg(&dev->udev->dev,
171 "%s : nonzero status received: %d\n",
172 __func__, status);
173 }
174 goto exit;
175 }
176
177 if (urb->actual_length > 0 && dev->interrupt_in_buffer[0] != 0x00) {
178 if (dev->read_buffer_length <
179 (4 * usb_endpoint_maxp(dev->interrupt_in_endpoint)) -
180 (urb->actual_length)) {
181 memcpy (dev->read_buffer_primary +
182 dev->read_buffer_length,
183 dev->interrupt_in_buffer, urb->actual_length);
184
185 dev->read_buffer_length += urb->actual_length;
186 dev_dbg(&dev->udev->dev,"%s reading %d\n", __func__,
187 urb->actual_length);
188 } else {
189 dev_dbg(&dev->udev->dev,"%s : read_buffer overflow\n",
190 __func__);
191 }
192 }
193
194exit:
195 dev->read_urb_finished = 1;
196 spin_unlock(&dev->buflock);
197 /* always wake up so we recover from errors */
198 wake_up_interruptible(&dev->read_wait);
199}
200
201static void adu_interrupt_out_callback(struct urb *urb)
202{
203 struct adu_device *dev = urb->context;
204 int status = urb->status;
205
206 adu_debug_data(&dev->udev->dev, __func__,
207 urb->actual_length, urb->transfer_buffer);
208
209 if (status != 0) {
210 if ((status != -ENOENT) &&
211 (status != -ECONNRESET)) {
212 dev_dbg(&dev->udev->dev,
213 "%s :nonzero status received: %d\n", __func__,
214 status);
215 }
216 return;
217 }
218
219 spin_lock(&dev->buflock);
220 dev->out_urb_finished = 1;
221 wake_up(&dev->write_wait);
222 spin_unlock(&dev->buflock);
223}
224
225static int adu_open(struct inode *inode, struct file *file)
226{
227 struct adu_device *dev = NULL;
228 struct usb_interface *interface;
229 int subminor;
230 int retval;
231
232 subminor = iminor(inode);
233
234 retval = mutex_lock_interruptible(&adutux_mutex);
235 if (retval)
236 goto exit_no_lock;
237
238 interface = usb_find_interface(&adu_driver, subminor);
239 if (!interface) {
240 pr_err("%s - error, can't find device for minor %d\n",
241 __func__, subminor);
242 retval = -ENODEV;
243 goto exit_no_device;
244 }
245
246 dev = usb_get_intfdata(interface);
247 if (!dev || !dev->udev) {
248 retval = -ENODEV;
249 goto exit_no_device;
250 }
251
252 /* check that nobody else is using the device */
253 if (dev->open_count) {
254 retval = -EBUSY;
255 goto exit_no_device;
256 }
257
258 ++dev->open_count;
259 dev_dbg(&dev->udev->dev, "%s: open count %d\n", __func__,
260 dev->open_count);
261
262 /* save device in the file's private structure */
263 file->private_data = dev;
264
265 /* initialize in direction */
266 dev->read_buffer_length = 0;
267
268 /* fixup first read by having urb waiting for it */
269 usb_fill_int_urb(dev->interrupt_in_urb, dev->udev,
270 usb_rcvintpipe(dev->udev,
271 dev->interrupt_in_endpoint->bEndpointAddress),
272 dev->interrupt_in_buffer,
273 usb_endpoint_maxp(dev->interrupt_in_endpoint),
274 adu_interrupt_in_callback, dev,
275 dev->interrupt_in_endpoint->bInterval);
276 dev->read_urb_finished = 0;
277 if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL))
278 dev->read_urb_finished = 1;
279 /* we ignore failure */
280 /* end of fixup for first read */
281
282 /* initialize out direction */
283 dev->out_urb_finished = 1;
284
285 retval = 0;
286
287exit_no_device:
288 mutex_unlock(&adutux_mutex);
289exit_no_lock:
290 return retval;
291}
292
293static void adu_release_internal(struct adu_device *dev)
294{
295 /* decrement our usage count for the device */
296 --dev->open_count;
297 dev_dbg(&dev->udev->dev, "%s : open count %d\n", __func__,
298 dev->open_count);
299 if (dev->open_count <= 0) {
300 adu_abort_transfers(dev);
301 dev->open_count = 0;
302 }
303}
304
305static int adu_release(struct inode *inode, struct file *file)
306{
307 struct adu_device *dev;
308 int retval = 0;
309
310 if (file == NULL) {
311 retval = -ENODEV;
312 goto exit;
313 }
314
315 dev = file->private_data;
316 if (dev == NULL) {
317 retval = -ENODEV;
318 goto exit;
319 }
320
321 mutex_lock(&adutux_mutex); /* not interruptible */
322
323 if (dev->open_count <= 0) {
324 dev_dbg(&dev->udev->dev, "%s : device not opened\n", __func__);
325 retval = -ENODEV;
326 goto unlock;
327 }
328
329 adu_release_internal(dev);
330 if (dev->udev == NULL) {
331 /* the device was unplugged before the file was released */
332 if (!dev->open_count) /* ... and we're the last user */
333 adu_delete(dev);
334 }
335unlock:
336 mutex_unlock(&adutux_mutex);
337exit:
338 return retval;
339}
340
341static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
342 loff_t *ppos)
343{
344 struct adu_device *dev;
345 size_t bytes_read = 0;
346 size_t bytes_to_read = count;
347 int i;
348 int retval = 0;
349 int timeout = 0;
350 int should_submit = 0;
351 unsigned long flags;
352 DECLARE_WAITQUEUE(wait, current);
353
354 dev = file->private_data;
355 if (mutex_lock_interruptible(&dev->mtx))
356 return -ERESTARTSYS;
357
358 /* verify that the device wasn't unplugged */
359 if (dev->udev == NULL) {
360 retval = -ENODEV;
361 pr_err("No device or device unplugged %d\n", retval);
362 goto exit;
363 }
364
365 /* verify that some data was requested */
366 if (count == 0) {
367 dev_dbg(&dev->udev->dev, "%s : read request of 0 bytes\n",
368 __func__);
369 goto exit;
370 }
371
372 timeout = COMMAND_TIMEOUT;
373 dev_dbg(&dev->udev->dev, "%s : about to start looping\n", __func__);
374 while (bytes_to_read) {
375 int data_in_secondary = dev->secondary_tail - dev->secondary_head;
376 dev_dbg(&dev->udev->dev,
377 "%s : while, data_in_secondary=%d, status=%d\n",
378 __func__, data_in_secondary,
379 dev->interrupt_in_urb->status);
380
381 if (data_in_secondary) {
382 /* drain secondary buffer */
383 int amount = bytes_to_read < data_in_secondary ? bytes_to_read : data_in_secondary;
384 i = copy_to_user(buffer, dev->read_buffer_secondary+dev->secondary_head, amount);
385 if (i) {
386 retval = -EFAULT;
387 goto exit;
388 }
389 dev->secondary_head += (amount - i);
390 bytes_read += (amount - i);
391 bytes_to_read -= (amount - i);
392 if (i) {
393 retval = bytes_read ? bytes_read : -EFAULT;
394 goto exit;
395 }
396 } else {
397 /* we check the primary buffer */
398 spin_lock_irqsave (&dev->buflock, flags);
399 if (dev->read_buffer_length) {
400 /* we secure access to the primary */
401 char *tmp;
402 dev_dbg(&dev->udev->dev,
403 "%s : swap, read_buffer_length = %d\n",
404 __func__, dev->read_buffer_length);
405 tmp = dev->read_buffer_secondary;
406 dev->read_buffer_secondary = dev->read_buffer_primary;
407 dev->read_buffer_primary = tmp;
408 dev->secondary_head = 0;
409 dev->secondary_tail = dev->read_buffer_length;
410 dev->read_buffer_length = 0;
411 spin_unlock_irqrestore(&dev->buflock, flags);
412 /* we have a free buffer so use it */
413 should_submit = 1;
414 } else {
415 /* even the primary was empty - we may need to do IO */
416 if (!dev->read_urb_finished) {
417 /* somebody is doing IO */
418 spin_unlock_irqrestore(&dev->buflock, flags);
419 dev_dbg(&dev->udev->dev,
420 "%s : submitted already\n",
421 __func__);
422 } else {
423 /* we must initiate input */
424 dev_dbg(&dev->udev->dev,
425 "%s : initiate input\n",
426 __func__);
427 dev->read_urb_finished = 0;
428 spin_unlock_irqrestore(&dev->buflock, flags);
429
430 usb_fill_int_urb(dev->interrupt_in_urb, dev->udev,
431 usb_rcvintpipe(dev->udev,
432 dev->interrupt_in_endpoint->bEndpointAddress),
433 dev->interrupt_in_buffer,
434 usb_endpoint_maxp(dev->interrupt_in_endpoint),
435 adu_interrupt_in_callback,
436 dev,
437 dev->interrupt_in_endpoint->bInterval);
438 retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
439 if (retval) {
440 dev->read_urb_finished = 1;
441 if (retval == -ENOMEM) {
442 retval = bytes_read ? bytes_read : -ENOMEM;
443 }
444 dev_dbg(&dev->udev->dev,
445 "%s : submit failed\n",
446 __func__);
447 goto exit;
448 }
449 }
450
451 /* we wait for I/O to complete */
452 set_current_state(TASK_INTERRUPTIBLE);
453 add_wait_queue(&dev->read_wait, &wait);
454 spin_lock_irqsave(&dev->buflock, flags);
455 if (!dev->read_urb_finished) {
456 spin_unlock_irqrestore(&dev->buflock, flags);
457 timeout = schedule_timeout(COMMAND_TIMEOUT);
458 } else {
459 spin_unlock_irqrestore(&dev->buflock, flags);
460 set_current_state(TASK_RUNNING);
461 }
462 remove_wait_queue(&dev->read_wait, &wait);
463
464 if (timeout <= 0) {
465 dev_dbg(&dev->udev->dev,
466 "%s : timeout\n", __func__);
467 retval = bytes_read ? bytes_read : -ETIMEDOUT;
468 goto exit;
469 }
470
471 if (signal_pending(current)) {
472 dev_dbg(&dev->udev->dev,
473 "%s : signal pending\n",
474 __func__);
475 retval = bytes_read ? bytes_read : -EINTR;
476 goto exit;
477 }
478 }
479 }
480 }
481
482 retval = bytes_read;
483 /* if the primary buffer is empty then use it */
484 spin_lock_irqsave(&dev->buflock, flags);
485 if (should_submit && dev->read_urb_finished) {
486 dev->read_urb_finished = 0;
487 spin_unlock_irqrestore(&dev->buflock, flags);
488 usb_fill_int_urb(dev->interrupt_in_urb, dev->udev,
489 usb_rcvintpipe(dev->udev,
490 dev->interrupt_in_endpoint->bEndpointAddress),
491 dev->interrupt_in_buffer,
492 usb_endpoint_maxp(dev->interrupt_in_endpoint),
493 adu_interrupt_in_callback,
494 dev,
495 dev->interrupt_in_endpoint->bInterval);
496 if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL) != 0)
497 dev->read_urb_finished = 1;
498 /* we ignore failure */
499 } else {
500 spin_unlock_irqrestore(&dev->buflock, flags);
501 }
502
503exit:
504 /* unlock the device */
505 mutex_unlock(&dev->mtx);
506
507 return retval;
508}
509
510static ssize_t adu_write(struct file *file, const __user char *buffer,
511 size_t count, loff_t *ppos)
512{
513 DECLARE_WAITQUEUE(waita, current);
514 struct adu_device *dev;
515 size_t bytes_written = 0;
516 size_t bytes_to_write;
517 size_t buffer_size;
518 unsigned long flags;
519 int retval;
520
521 dev = file->private_data;
522
523 retval = mutex_lock_interruptible(&dev->mtx);
524 if (retval)
525 goto exit_nolock;
526
527 /* verify that the device wasn't unplugged */
528 if (dev->udev == NULL) {
529 retval = -ENODEV;
530 pr_err("No device or device unplugged %d\n", retval);
531 goto exit;
532 }
533
534 /* verify that we actually have some data to write */
535 if (count == 0) {
536 dev_dbg(&dev->udev->dev, "%s : write request of 0 bytes\n",
537 __func__);
538 goto exit;
539 }
540
541 while (count > 0) {
542 add_wait_queue(&dev->write_wait, &waita);
543 set_current_state(TASK_INTERRUPTIBLE);
544 spin_lock_irqsave(&dev->buflock, flags);
545 if (!dev->out_urb_finished) {
546 spin_unlock_irqrestore(&dev->buflock, flags);
547
548 mutex_unlock(&dev->mtx);
549 if (signal_pending(current)) {
550 dev_dbg(&dev->udev->dev, "%s : interrupted\n",
551 __func__);
552 set_current_state(TASK_RUNNING);
553 retval = -EINTR;
554 goto exit_onqueue;
555 }
556 if (schedule_timeout(COMMAND_TIMEOUT) == 0) {
557 dev_dbg(&dev->udev->dev,
558 "%s - command timed out.\n", __func__);
559 retval = -ETIMEDOUT;
560 goto exit_onqueue;
561 }
562 remove_wait_queue(&dev->write_wait, &waita);
563 retval = mutex_lock_interruptible(&dev->mtx);
564 if (retval) {
565 retval = bytes_written ? bytes_written : retval;
566 goto exit_nolock;
567 }
568
569 dev_dbg(&dev->udev->dev,
570 "%s : in progress, count = %Zd\n",
571 __func__, count);
572 } else {
573 spin_unlock_irqrestore(&dev->buflock, flags);
574 set_current_state(TASK_RUNNING);
575 remove_wait_queue(&dev->write_wait, &waita);
576 dev_dbg(&dev->udev->dev, "%s : sending, count = %Zd\n",
577 __func__, count);
578
579 /* write the data into interrupt_out_buffer from userspace */
580 buffer_size = usb_endpoint_maxp(dev->interrupt_out_endpoint);
581 bytes_to_write = count > buffer_size ? buffer_size : count;
582 dev_dbg(&dev->udev->dev,
583 "%s : buffer_size = %Zd, count = %Zd, bytes_to_write = %Zd\n",
584 __func__, buffer_size, count, bytes_to_write);
585
586 if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write) != 0) {
587 retval = -EFAULT;
588 goto exit;
589 }
590
591 /* send off the urb */
592 usb_fill_int_urb(
593 dev->interrupt_out_urb,
594 dev->udev,
595 usb_sndintpipe(dev->udev, dev->interrupt_out_endpoint->bEndpointAddress),
596 dev->interrupt_out_buffer,
597 bytes_to_write,
598 adu_interrupt_out_callback,
599 dev,
600 dev->interrupt_out_endpoint->bInterval);
601 dev->interrupt_out_urb->actual_length = bytes_to_write;
602 dev->out_urb_finished = 0;
603 retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
604 if (retval < 0) {
605 dev->out_urb_finished = 1;
606 dev_err(&dev->udev->dev, "Couldn't submit "
607 "interrupt_out_urb %d\n", retval);
608 goto exit;
609 }
610
611 buffer += bytes_to_write;
612 count -= bytes_to_write;
613
614 bytes_written += bytes_to_write;
615 }
616 }
617 mutex_unlock(&dev->mtx);
618 return bytes_written;
619
620exit:
621 mutex_unlock(&dev->mtx);
622exit_nolock:
623 return retval;
624
625exit_onqueue:
626 remove_wait_queue(&dev->write_wait, &waita);
627 return retval;
628}
629
630/* file operations needed when we register this driver */
631static const struct file_operations adu_fops = {
632 .owner = THIS_MODULE,
633 .read = adu_read,
634 .write = adu_write,
635 .open = adu_open,
636 .release = adu_release,
637 .llseek = noop_llseek,
638};
639
640/*
641 * usb class driver info in order to get a minor number from the usb core,
642 * and to have the device registered with devfs and the driver core
643 */
644static struct usb_class_driver adu_class = {
645 .name = "usb/adutux%d",
646 .fops = &adu_fops,
647 .minor_base = ADU_MINOR_BASE,
648};
649
650/**
651 * adu_probe
652 *
653 * Called by the usb core when a new device is connected that it thinks
654 * this driver might be interested in.
655 */
656static int adu_probe(struct usb_interface *interface,
657 const struct usb_device_id *id)
658{
659 struct usb_device *udev = interface_to_usbdev(interface);
660 struct adu_device *dev = NULL;
661 struct usb_host_interface *iface_desc;
662 struct usb_endpoint_descriptor *endpoint;
663 int retval = -ENODEV;
664 int in_end_size;
665 int out_end_size;
666 int i;
667
668 if (udev == NULL) {
669 dev_err(&interface->dev, "udev is NULL.\n");
670 goto exit;
671 }
672
673 /* allocate memory for our device state and initialize it */
674 dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL);
675 if (dev == NULL) {
676 dev_err(&interface->dev, "Out of memory\n");
677 retval = -ENOMEM;
678 goto exit;
679 }
680
681 mutex_init(&dev->mtx);
682 spin_lock_init(&dev->buflock);
683 dev->udev = udev;
684 init_waitqueue_head(&dev->read_wait);
685 init_waitqueue_head(&dev->write_wait);
686
687 iface_desc = &interface->altsetting[0];
688
689 /* set up the endpoint information */
690 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
691 endpoint = &iface_desc->endpoint[i].desc;
692
693 if (usb_endpoint_is_int_in(endpoint))
694 dev->interrupt_in_endpoint = endpoint;
695
696 if (usb_endpoint_is_int_out(endpoint))
697 dev->interrupt_out_endpoint = endpoint;
698 }
699 if (dev->interrupt_in_endpoint == NULL) {
700 dev_err(&interface->dev, "interrupt in endpoint not found\n");
701 goto error;
702 }
703 if (dev->interrupt_out_endpoint == NULL) {
704 dev_err(&interface->dev, "interrupt out endpoint not found\n");
705 goto error;
706 }
707
708 in_end_size = usb_endpoint_maxp(dev->interrupt_in_endpoint);
709 out_end_size = usb_endpoint_maxp(dev->interrupt_out_endpoint);
710
711 dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL);
712 if (!dev->read_buffer_primary) {
713 dev_err(&interface->dev, "Couldn't allocate read_buffer_primary\n");
714 retval = -ENOMEM;
715 goto error;
716 }
717
718 /* debug code prime the buffer */
719 memset(dev->read_buffer_primary, 'a', in_end_size);
720 memset(dev->read_buffer_primary + in_end_size, 'b', in_end_size);
721 memset(dev->read_buffer_primary + (2 * in_end_size), 'c', in_end_size);
722 memset(dev->read_buffer_primary + (3 * in_end_size), 'd', in_end_size);
723
724 dev->read_buffer_secondary = kmalloc((4 * in_end_size), GFP_KERNEL);
725 if (!dev->read_buffer_secondary) {
726 dev_err(&interface->dev, "Couldn't allocate read_buffer_secondary\n");
727 retval = -ENOMEM;
728 goto error;
729 }
730
731 /* debug code prime the buffer */
732 memset(dev->read_buffer_secondary, 'e', in_end_size);
733 memset(dev->read_buffer_secondary + in_end_size, 'f', in_end_size);
734 memset(dev->read_buffer_secondary + (2 * in_end_size), 'g', in_end_size);
735 memset(dev->read_buffer_secondary + (3 * in_end_size), 'h', in_end_size);
736
737 dev->interrupt_in_buffer = kmalloc(in_end_size, GFP_KERNEL);
738 if (!dev->interrupt_in_buffer) {
739 dev_err(&interface->dev, "Couldn't allocate interrupt_in_buffer\n");
740 goto error;
741 }
742
743 /* debug code prime the buffer */
744 memset(dev->interrupt_in_buffer, 'i', in_end_size);
745
746 dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
747 if (!dev->interrupt_in_urb) {
748 dev_err(&interface->dev, "Couldn't allocate interrupt_in_urb\n");
749 goto error;
750 }
751 dev->interrupt_out_buffer = kmalloc(out_end_size, GFP_KERNEL);
752 if (!dev->interrupt_out_buffer) {
753 dev_err(&interface->dev, "Couldn't allocate interrupt_out_buffer\n");
754 goto error;
755 }
756 dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
757 if (!dev->interrupt_out_urb) {
758 dev_err(&interface->dev, "Couldn't allocate interrupt_out_urb\n");
759 goto error;
760 }
761
762 if (!usb_string(udev, udev->descriptor.iSerialNumber, dev->serial_number,
763 sizeof(dev->serial_number))) {
764 dev_err(&interface->dev, "Could not retrieve serial number\n");
765 goto error;
766 }
767 dev_dbg(&interface->dev,"serial_number=%s", dev->serial_number);
768
769 /* we can register the device now, as it is ready */
770 usb_set_intfdata(interface, dev);
771
772 retval = usb_register_dev(interface, &adu_class);
773
774 if (retval) {
775 /* something prevented us from registering this driver */
776 dev_err(&interface->dev, "Not able to get a minor for this device.\n");
777 usb_set_intfdata(interface, NULL);
778 goto error;
779 }
780
781 dev->minor = interface->minor;
782
783 /* let the user know what node this device is now attached to */
784 dev_info(&interface->dev, "ADU%d %s now attached to /dev/usb/adutux%d\n",
785 le16_to_cpu(udev->descriptor.idProduct), dev->serial_number,
786 (dev->minor - ADU_MINOR_BASE));
787exit:
788 return retval;
789
790error:
791 adu_delete(dev);
792 return retval;
793}
794
795/**
796 * adu_disconnect
797 *
798 * Called by the usb core when the device is removed from the system.
799 */
800static void adu_disconnect(struct usb_interface *interface)
801{
802 struct adu_device *dev;
803 int minor;
804
805 dev = usb_get_intfdata(interface);
806
807 mutex_lock(&dev->mtx); /* not interruptible */
808 dev->udev = NULL; /* poison */
809 minor = dev->minor;
810 usb_deregister_dev(interface, &adu_class);
811 mutex_unlock(&dev->mtx);
812
813 mutex_lock(&adutux_mutex);
814 usb_set_intfdata(interface, NULL);
815
816 /* if the device is not opened, then we clean up right now */
817 if (!dev->open_count)
818 adu_delete(dev);
819
820 mutex_unlock(&adutux_mutex);
821}
822
823/* usb specific object needed to register this driver with the usb subsystem */
824static struct usb_driver adu_driver = {
825 .name = "adutux",
826 .probe = adu_probe,
827 .disconnect = adu_disconnect,
828 .id_table = device_table,
829};
830
831module_usb_driver(adu_driver);
832
833MODULE_AUTHOR(DRIVER_AUTHOR);
834MODULE_DESCRIPTION(DRIVER_DESC);
835MODULE_LICENSE("GPL");