Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2011-12 Synopsys, Inc. (www.synopsys.com)
4 */
5
6#include <linux/interrupt.h>
7#include <linux/module.h>
8#include <linux/of.h>
9#include <linux/irqdomain.h>
10#include <linux/irqchip.h>
11#include <asm/irq.h>
12
13#define NR_CPU_IRQS 32 /* number of irq lines coming in */
14#define TIMER0_IRQ 3 /* Fixed by ISA */
15
16/*
17 * Early Hardware specific Interrupt setup
18 * -Platform independent, needed for each CPU (not foldable into init_IRQ)
19 * -Called very early (start_kernel -> setup_arch -> setup_processor)
20 *
21 * what it does ?
22 * -Optionally, setup the High priority Interrupts as Level 2 IRQs
23 */
24void arc_init_IRQ(void)
25{
26 unsigned int level_mask = 0, i;
27
28 /* Is timer high priority Interrupt (Level2 in ARCompact jargon) */
29 level_mask |= IS_ENABLED(CONFIG_ARC_COMPACT_IRQ_LEVELS) << TIMER0_IRQ;
30
31 /*
32 * Write to register, even if no LV2 IRQs configured to reset it
33 * in case bootloader had mucked with it
34 */
35 write_aux_reg(AUX_IRQ_LEV, level_mask);
36
37 if (level_mask)
38 pr_info("Level-2 interrupts bitset %x\n", level_mask);
39
40 /*
41 * Disable all IRQ lines so faulty external hardware won't
42 * trigger interrupt that kernel is not ready to handle.
43 */
44 for (i = TIMER0_IRQ; i < NR_CPU_IRQS; i++) {
45 unsigned int ienb;
46
47 ienb = read_aux_reg(AUX_IENABLE);
48 ienb &= ~(1 << i);
49 write_aux_reg(AUX_IENABLE, ienb);
50 }
51}
52
53/*
54 * ARC700 core includes a simple on-chip intc supporting
55 * -per IRQ enable/disable
56 * -2 levels of interrupts (high/low)
57 * -all interrupts being level triggered
58 *
59 * To reduce platform code, we assume all IRQs directly hooked-up into intc.
60 * Platforms with external intc, hence cascaded IRQs, are free to over-ride
61 * below, per IRQ.
62 */
63
64static void arc_irq_mask(struct irq_data *data)
65{
66 unsigned int ienb;
67
68 ienb = read_aux_reg(AUX_IENABLE);
69 ienb &= ~(1 << data->hwirq);
70 write_aux_reg(AUX_IENABLE, ienb);
71}
72
73static void arc_irq_unmask(struct irq_data *data)
74{
75 unsigned int ienb;
76
77 ienb = read_aux_reg(AUX_IENABLE);
78 ienb |= (1 << data->hwirq);
79 write_aux_reg(AUX_IENABLE, ienb);
80}
81
82static struct irq_chip onchip_intc = {
83 .name = "ARC In-core Intc",
84 .irq_mask = arc_irq_mask,
85 .irq_unmask = arc_irq_unmask,
86};
87
88static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq,
89 irq_hw_number_t hw)
90{
91 switch (hw) {
92 case TIMER0_IRQ:
93 irq_set_percpu_devid(irq);
94 irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq);
95 break;
96 default:
97 irq_set_chip_and_handler(irq, &onchip_intc, handle_level_irq);
98 }
99 return 0;
100}
101
102static const struct irq_domain_ops arc_intc_domain_ops = {
103 .xlate = irq_domain_xlate_onecell,
104 .map = arc_intc_domain_map,
105};
106
107static int __init
108init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
109{
110 struct irq_domain *root_domain;
111
112 if (parent)
113 panic("DeviceTree incore intc not a root irq controller\n");
114
115 root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS,
116 &arc_intc_domain_ops, NULL);
117 if (!root_domain)
118 panic("root irq domain not avail\n");
119
120 /*
121 * Needed for primary domain lookup to succeed
122 * This is a primary irqchip, and can never have a parent
123 */
124 irq_set_default_host(root_domain);
125
126 return 0;
127}
128
129IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ);
130
131/*
132 * arch_local_irq_enable - Enable interrupts.
133 *
134 * 1. Explicitly called to re-enable interrupts
135 * 2. Implicitly called from spin_unlock_irq, write_unlock_irq etc
136 * which maybe in hard ISR itself
137 *
138 * Semantics of this function change depending on where it is called from:
139 *
140 * -If called from hard-ISR, it must not invert interrupt priorities
141 * e.g. suppose TIMER is high priority (Level 2) IRQ
142 * Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times.
143 * Here local_irq_enable( ) shd not re-enable lower priority interrupts
144 * -If called from soft-ISR, it must re-enable all interrupts
145 * soft ISR are low prioity jobs which can be very slow, thus all IRQs
146 * must be enabled while they run.
147 * Now hardware context wise we may still be in L2 ISR (not done rtie)
148 * still we must re-enable both L1 and L2 IRQs
149 * Another twist is prev scenario with flow being
150 * L1 ISR ==> interrupted by L2 ISR ==> L2 soft ISR
151 * here we must not re-enable Ll as prev Ll Interrupt's h/w context will get
152 * over-written (this is deficiency in ARC700 Interrupt mechanism)
153 */
154
155#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS /* Complex version for 2 IRQ levels */
156
157void arch_local_irq_enable(void)
158{
159 unsigned long flags = arch_local_save_flags();
160
161 if (flags & STATUS_A2_MASK)
162 flags |= STATUS_E2_MASK;
163 else if (flags & STATUS_A1_MASK)
164 flags |= STATUS_E1_MASK;
165
166 arch_local_irq_restore(flags);
167}
168
169EXPORT_SYMBOL(arch_local_irq_enable);
170#endif
1/*
2 * Copyright (C) 2011-12 Synopsys, Inc. (www.synopsys.com)
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 *
8 */
9
10#include <linux/interrupt.h>
11#include <linux/module.h>
12#include <linux/of.h>
13#include <linux/irqdomain.h>
14#include <linux/irqchip.h>
15#include <asm/irq.h>
16
17/*
18 * Early Hardware specific Interrupt setup
19 * -Platform independent, needed for each CPU (not foldable into init_IRQ)
20 * -Called very early (start_kernel -> setup_arch -> setup_processor)
21 *
22 * what it does ?
23 * -Optionally, setup the High priority Interrupts as Level 2 IRQs
24 */
25void arc_init_IRQ(void)
26{
27 int level_mask = 0;
28
29 /* setup any high priority Interrupts (Level2 in ARCompact jargon) */
30 level_mask |= IS_ENABLED(CONFIG_ARC_IRQ3_LV2) << 3;
31 level_mask |= IS_ENABLED(CONFIG_ARC_IRQ5_LV2) << 5;
32 level_mask |= IS_ENABLED(CONFIG_ARC_IRQ6_LV2) << 6;
33
34 /*
35 * Write to register, even if no LV2 IRQs configured to reset it
36 * in case bootloader had mucked with it
37 */
38 write_aux_reg(AUX_IRQ_LEV, level_mask);
39
40 if (level_mask)
41 pr_info("Level-2 interrupts bitset %x\n", level_mask);
42}
43
44/*
45 * ARC700 core includes a simple on-chip intc supporting
46 * -per IRQ enable/disable
47 * -2 levels of interrupts (high/low)
48 * -all interrupts being level triggered
49 *
50 * To reduce platform code, we assume all IRQs directly hooked-up into intc.
51 * Platforms with external intc, hence cascaded IRQs, are free to over-ride
52 * below, per IRQ.
53 */
54
55static void arc_irq_mask(struct irq_data *data)
56{
57 unsigned int ienb;
58
59 ienb = read_aux_reg(AUX_IENABLE);
60 ienb &= ~(1 << data->irq);
61 write_aux_reg(AUX_IENABLE, ienb);
62}
63
64static void arc_irq_unmask(struct irq_data *data)
65{
66 unsigned int ienb;
67
68 ienb = read_aux_reg(AUX_IENABLE);
69 ienb |= (1 << data->irq);
70 write_aux_reg(AUX_IENABLE, ienb);
71}
72
73static struct irq_chip onchip_intc = {
74 .name = "ARC In-core Intc",
75 .irq_mask = arc_irq_mask,
76 .irq_unmask = arc_irq_unmask,
77};
78
79static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq,
80 irq_hw_number_t hw)
81{
82 switch (irq) {
83 case TIMER0_IRQ:
84 irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq);
85 break;
86 default:
87 irq_set_chip_and_handler(irq, &onchip_intc, handle_level_irq);
88 }
89 return 0;
90}
91
92static const struct irq_domain_ops arc_intc_domain_ops = {
93 .xlate = irq_domain_xlate_onecell,
94 .map = arc_intc_domain_map,
95};
96
97static struct irq_domain *root_domain;
98
99static int __init
100init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
101{
102 if (parent)
103 panic("DeviceTree incore intc not a root irq controller\n");
104
105 root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0,
106 &arc_intc_domain_ops, NULL);
107
108 if (!root_domain)
109 panic("root irq domain not avail\n");
110
111 /* with this we don't need to export root_domain */
112 irq_set_default_host(root_domain);
113
114 return 0;
115}
116
117IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ);
118
119/*
120 * arch_local_irq_enable - Enable interrupts.
121 *
122 * 1. Explicitly called to re-enable interrupts
123 * 2. Implicitly called from spin_unlock_irq, write_unlock_irq etc
124 * which maybe in hard ISR itself
125 *
126 * Semantics of this function change depending on where it is called from:
127 *
128 * -If called from hard-ISR, it must not invert interrupt priorities
129 * e.g. suppose TIMER is high priority (Level 2) IRQ
130 * Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times.
131 * Here local_irq_enable( ) shd not re-enable lower priority interrupts
132 * -If called from soft-ISR, it must re-enable all interrupts
133 * soft ISR are low prioity jobs which can be very slow, thus all IRQs
134 * must be enabled while they run.
135 * Now hardware context wise we may still be in L2 ISR (not done rtie)
136 * still we must re-enable both L1 and L2 IRQs
137 * Another twist is prev scenario with flow being
138 * L1 ISR ==> interrupted by L2 ISR ==> L2 soft ISR
139 * here we must not re-enable Ll as prev Ll Interrupt's h/w context will get
140 * over-written (this is deficiency in ARC700 Interrupt mechanism)
141 */
142
143#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS /* Complex version for 2 IRQ levels */
144
145void arch_local_irq_enable(void)
146{
147 unsigned long flags = arch_local_save_flags();
148
149 if (flags & STATUS_A2_MASK)
150 flags |= STATUS_E2_MASK;
151 else if (flags & STATUS_A1_MASK)
152 flags |= STATUS_E1_MASK;
153
154 arch_local_irq_restore(flags);
155}
156
157EXPORT_SYMBOL(arch_local_irq_enable);
158#endif