Loading...
1// SPDX-License-Identifier: GPL-1.0+
2/*
3 * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
4 *
5 * Device driver for Microgate SyncLink Multiport
6 * high speed multiprotocol serial adapter.
7 *
8 * written by Paul Fulghum for Microgate Corporation
9 * paulkf@microgate.com
10 *
11 * Microgate and SyncLink are trademarks of Microgate Corporation
12 *
13 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
14 *
15 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
16 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
18 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
19 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
20 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
21 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
23 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
24 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
25 * OF THE POSSIBILITY OF SUCH DAMAGE.
26 */
27
28#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
29#if defined(__i386__)
30# define BREAKPOINT() asm(" int $3");
31#else
32# define BREAKPOINT() { }
33#endif
34
35#define MAX_DEVICES 12
36
37#include <linux/module.h>
38#include <linux/errno.h>
39#include <linux/signal.h>
40#include <linux/sched.h>
41#include <linux/timer.h>
42#include <linux/interrupt.h>
43#include <linux/pci.h>
44#include <linux/tty.h>
45#include <linux/tty_flip.h>
46#include <linux/serial.h>
47#include <linux/major.h>
48#include <linux/string.h>
49#include <linux/fcntl.h>
50#include <linux/ptrace.h>
51#include <linux/ioport.h>
52#include <linux/mm.h>
53#include <linux/seq_file.h>
54#include <linux/slab.h>
55#include <linux/netdevice.h>
56#include <linux/vmalloc.h>
57#include <linux/init.h>
58#include <linux/delay.h>
59#include <linux/ioctl.h>
60
61#include <asm/io.h>
62#include <asm/irq.h>
63#include <asm/dma.h>
64#include <linux/bitops.h>
65#include <asm/types.h>
66#include <linux/termios.h>
67#include <linux/workqueue.h>
68#include <linux/hdlc.h>
69#include <linux/synclink.h>
70
71#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
72#define SYNCLINK_GENERIC_HDLC 1
73#else
74#define SYNCLINK_GENERIC_HDLC 0
75#endif
76
77#define GET_USER(error,value,addr) error = get_user(value,addr)
78#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
79#define PUT_USER(error,value,addr) error = put_user(value,addr)
80#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
81
82#include <linux/uaccess.h>
83
84static MGSL_PARAMS default_params = {
85 MGSL_MODE_HDLC, /* unsigned long mode */
86 0, /* unsigned char loopback; */
87 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
88 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
89 0, /* unsigned long clock_speed; */
90 0xff, /* unsigned char addr_filter; */
91 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
92 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
93 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
94 9600, /* unsigned long data_rate; */
95 8, /* unsigned char data_bits; */
96 1, /* unsigned char stop_bits; */
97 ASYNC_PARITY_NONE /* unsigned char parity; */
98};
99
100/* size in bytes of DMA data buffers */
101#define SCABUFSIZE 1024
102#define SCA_MEM_SIZE 0x40000
103#define SCA_BASE_SIZE 512
104#define SCA_REG_SIZE 16
105#define SCA_MAX_PORTS 4
106#define SCAMAXDESC 128
107
108#define BUFFERLISTSIZE 4096
109
110/* SCA-I style DMA buffer descriptor */
111typedef struct _SCADESC
112{
113 u16 next; /* lower l6 bits of next descriptor addr */
114 u16 buf_ptr; /* lower 16 bits of buffer addr */
115 u8 buf_base; /* upper 8 bits of buffer addr */
116 u8 pad1;
117 u16 length; /* length of buffer */
118 u8 status; /* status of buffer */
119 u8 pad2;
120} SCADESC, *PSCADESC;
121
122typedef struct _SCADESC_EX
123{
124 /* device driver bookkeeping section */
125 char *virt_addr; /* virtual address of data buffer */
126 u16 phys_entry; /* lower 16-bits of physical address of this descriptor */
127} SCADESC_EX, *PSCADESC_EX;
128
129/* The queue of BH actions to be performed */
130
131#define BH_RECEIVE 1
132#define BH_TRANSMIT 2
133#define BH_STATUS 4
134
135#define IO_PIN_SHUTDOWN_LIMIT 100
136
137struct _input_signal_events {
138 int ri_up;
139 int ri_down;
140 int dsr_up;
141 int dsr_down;
142 int dcd_up;
143 int dcd_down;
144 int cts_up;
145 int cts_down;
146};
147
148/*
149 * Device instance data structure
150 */
151typedef struct _synclinkmp_info {
152 void *if_ptr; /* General purpose pointer (used by SPPP) */
153 int magic;
154 struct tty_port port;
155 int line;
156 unsigned short close_delay;
157 unsigned short closing_wait; /* time to wait before closing */
158
159 struct mgsl_icount icount;
160
161 int timeout;
162 int x_char; /* xon/xoff character */
163 u16 read_status_mask1; /* break detection (SR1 indications) */
164 u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */
165 unsigned char ignore_status_mask1; /* break detection (SR1 indications) */
166 unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */
167 unsigned char *tx_buf;
168 int tx_put;
169 int tx_get;
170 int tx_count;
171
172 wait_queue_head_t status_event_wait_q;
173 wait_queue_head_t event_wait_q;
174 struct timer_list tx_timer; /* HDLC transmit timeout timer */
175 struct _synclinkmp_info *next_device; /* device list link */
176 struct timer_list status_timer; /* input signal status check timer */
177
178 spinlock_t lock; /* spinlock for synchronizing with ISR */
179 struct work_struct task; /* task structure for scheduling bh */
180
181 u32 max_frame_size; /* as set by device config */
182
183 u32 pending_bh;
184
185 bool bh_running; /* Protection from multiple */
186 int isr_overflow;
187 bool bh_requested;
188
189 int dcd_chkcount; /* check counts to prevent */
190 int cts_chkcount; /* too many IRQs if a signal */
191 int dsr_chkcount; /* is floating */
192 int ri_chkcount;
193
194 char *buffer_list; /* virtual address of Rx & Tx buffer lists */
195 unsigned long buffer_list_phys;
196
197 unsigned int rx_buf_count; /* count of total allocated Rx buffers */
198 SCADESC *rx_buf_list; /* list of receive buffer entries */
199 SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
200 unsigned int current_rx_buf;
201
202 unsigned int tx_buf_count; /* count of total allocated Tx buffers */
203 SCADESC *tx_buf_list; /* list of transmit buffer entries */
204 SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
205 unsigned int last_tx_buf;
206
207 unsigned char *tmp_rx_buf;
208 unsigned int tmp_rx_buf_count;
209
210 bool rx_enabled;
211 bool rx_overflow;
212
213 bool tx_enabled;
214 bool tx_active;
215 u32 idle_mode;
216
217 unsigned char ie0_value;
218 unsigned char ie1_value;
219 unsigned char ie2_value;
220 unsigned char ctrlreg_value;
221 unsigned char old_signals;
222
223 char device_name[25]; /* device instance name */
224
225 int port_count;
226 int adapter_num;
227 int port_num;
228
229 struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
230
231 unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
232
233 unsigned int irq_level; /* interrupt level */
234 unsigned long irq_flags;
235 bool irq_requested; /* true if IRQ requested */
236
237 MGSL_PARAMS params; /* communications parameters */
238
239 unsigned char serial_signals; /* current serial signal states */
240
241 bool irq_occurred; /* for diagnostics use */
242 unsigned int init_error; /* Initialization startup error */
243
244 u32 last_mem_alloc;
245 unsigned char* memory_base; /* shared memory address (PCI only) */
246 u32 phys_memory_base;
247 int shared_mem_requested;
248
249 unsigned char* sca_base; /* HD64570 SCA Memory address */
250 u32 phys_sca_base;
251 u32 sca_offset;
252 bool sca_base_requested;
253
254 unsigned char* lcr_base; /* local config registers (PCI only) */
255 u32 phys_lcr_base;
256 u32 lcr_offset;
257 int lcr_mem_requested;
258
259 unsigned char* statctrl_base; /* status/control register memory */
260 u32 phys_statctrl_base;
261 u32 statctrl_offset;
262 bool sca_statctrl_requested;
263
264 u32 misc_ctrl_value;
265 char *flag_buf;
266 bool drop_rts_on_tx_done;
267
268 struct _input_signal_events input_signal_events;
269
270 /* SPPP/Cisco HDLC device parts */
271 int netcount;
272 spinlock_t netlock;
273
274#if SYNCLINK_GENERIC_HDLC
275 struct net_device *netdev;
276#endif
277
278} SLMP_INFO;
279
280#define MGSL_MAGIC 0x5401
281
282/*
283 * define serial signal status change macros
284 */
285#define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */
286#define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */
287#define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */
288#define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */
289
290/* Common Register macros */
291#define LPR 0x00
292#define PABR0 0x02
293#define PABR1 0x03
294#define WCRL 0x04
295#define WCRM 0x05
296#define WCRH 0x06
297#define DPCR 0x08
298#define DMER 0x09
299#define ISR0 0x10
300#define ISR1 0x11
301#define ISR2 0x12
302#define IER0 0x14
303#define IER1 0x15
304#define IER2 0x16
305#define ITCR 0x18
306#define INTVR 0x1a
307#define IMVR 0x1c
308
309/* MSCI Register macros */
310#define TRB 0x20
311#define TRBL 0x20
312#define TRBH 0x21
313#define SR0 0x22
314#define SR1 0x23
315#define SR2 0x24
316#define SR3 0x25
317#define FST 0x26
318#define IE0 0x28
319#define IE1 0x29
320#define IE2 0x2a
321#define FIE 0x2b
322#define CMD 0x2c
323#define MD0 0x2e
324#define MD1 0x2f
325#define MD2 0x30
326#define CTL 0x31
327#define SA0 0x32
328#define SA1 0x33
329#define IDL 0x34
330#define TMC 0x35
331#define RXS 0x36
332#define TXS 0x37
333#define TRC0 0x38
334#define TRC1 0x39
335#define RRC 0x3a
336#define CST0 0x3c
337#define CST1 0x3d
338
339/* Timer Register Macros */
340#define TCNT 0x60
341#define TCNTL 0x60
342#define TCNTH 0x61
343#define TCONR 0x62
344#define TCONRL 0x62
345#define TCONRH 0x63
346#define TMCS 0x64
347#define TEPR 0x65
348
349/* DMA Controller Register macros */
350#define DARL 0x80
351#define DARH 0x81
352#define DARB 0x82
353#define BAR 0x80
354#define BARL 0x80
355#define BARH 0x81
356#define BARB 0x82
357#define SAR 0x84
358#define SARL 0x84
359#define SARH 0x85
360#define SARB 0x86
361#define CPB 0x86
362#define CDA 0x88
363#define CDAL 0x88
364#define CDAH 0x89
365#define EDA 0x8a
366#define EDAL 0x8a
367#define EDAH 0x8b
368#define BFL 0x8c
369#define BFLL 0x8c
370#define BFLH 0x8d
371#define BCR 0x8e
372#define BCRL 0x8e
373#define BCRH 0x8f
374#define DSR 0x90
375#define DMR 0x91
376#define FCT 0x93
377#define DIR 0x94
378#define DCMD 0x95
379
380/* combine with timer or DMA register address */
381#define TIMER0 0x00
382#define TIMER1 0x08
383#define TIMER2 0x10
384#define TIMER3 0x18
385#define RXDMA 0x00
386#define TXDMA 0x20
387
388/* SCA Command Codes */
389#define NOOP 0x00
390#define TXRESET 0x01
391#define TXENABLE 0x02
392#define TXDISABLE 0x03
393#define TXCRCINIT 0x04
394#define TXCRCEXCL 0x05
395#define TXEOM 0x06
396#define TXABORT 0x07
397#define MPON 0x08
398#define TXBUFCLR 0x09
399#define RXRESET 0x11
400#define RXENABLE 0x12
401#define RXDISABLE 0x13
402#define RXCRCINIT 0x14
403#define RXREJECT 0x15
404#define SEARCHMP 0x16
405#define RXCRCEXCL 0x17
406#define RXCRCCALC 0x18
407#define CHRESET 0x21
408#define HUNT 0x31
409
410/* DMA command codes */
411#define SWABORT 0x01
412#define FEICLEAR 0x02
413
414/* IE0 */
415#define TXINTE BIT7
416#define RXINTE BIT6
417#define TXRDYE BIT1
418#define RXRDYE BIT0
419
420/* IE1 & SR1 */
421#define UDRN BIT7
422#define IDLE BIT6
423#define SYNCD BIT4
424#define FLGD BIT4
425#define CCTS BIT3
426#define CDCD BIT2
427#define BRKD BIT1
428#define ABTD BIT1
429#define GAPD BIT1
430#define BRKE BIT0
431#define IDLD BIT0
432
433/* IE2 & SR2 */
434#define EOM BIT7
435#define PMP BIT6
436#define SHRT BIT6
437#define PE BIT5
438#define ABT BIT5
439#define FRME BIT4
440#define RBIT BIT4
441#define OVRN BIT3
442#define CRCE BIT2
443
444
445/*
446 * Global linked list of SyncLink devices
447 */
448static SLMP_INFO *synclinkmp_device_list = NULL;
449static int synclinkmp_adapter_count = -1;
450static int synclinkmp_device_count = 0;
451
452/*
453 * Set this param to non-zero to load eax with the
454 * .text section address and breakpoint on module load.
455 * This is useful for use with gdb and add-symbol-file command.
456 */
457static bool break_on_load = 0;
458
459/*
460 * Driver major number, defaults to zero to get auto
461 * assigned major number. May be forced as module parameter.
462 */
463static int ttymajor = 0;
464
465/*
466 * Array of user specified options for ISA adapters.
467 */
468static int debug_level = 0;
469static int maxframe[MAX_DEVICES] = {0,};
470
471module_param(break_on_load, bool, 0);
472module_param(ttymajor, int, 0);
473module_param(debug_level, int, 0);
474module_param_array(maxframe, int, NULL, 0);
475
476static char *driver_name = "SyncLink MultiPort driver";
477static char *driver_version = "$Revision: 4.38 $";
478
479static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
480static void synclinkmp_remove_one(struct pci_dev *dev);
481
482static const struct pci_device_id synclinkmp_pci_tbl[] = {
483 { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
484 { 0, }, /* terminate list */
485};
486MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
487
488MODULE_LICENSE("GPL");
489
490static struct pci_driver synclinkmp_pci_driver = {
491 .name = "synclinkmp",
492 .id_table = synclinkmp_pci_tbl,
493 .probe = synclinkmp_init_one,
494 .remove = synclinkmp_remove_one,
495};
496
497
498static struct tty_driver *serial_driver;
499
500/* number of characters left in xmit buffer before we ask for more */
501#define WAKEUP_CHARS 256
502
503
504/* tty callbacks */
505
506static int open(struct tty_struct *tty, struct file * filp);
507static void close(struct tty_struct *tty, struct file * filp);
508static void hangup(struct tty_struct *tty);
509static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
510
511static int write(struct tty_struct *tty, const unsigned char *buf, int count);
512static int put_char(struct tty_struct *tty, unsigned char ch);
513static void send_xchar(struct tty_struct *tty, char ch);
514static void wait_until_sent(struct tty_struct *tty, int timeout);
515static int write_room(struct tty_struct *tty);
516static void flush_chars(struct tty_struct *tty);
517static void flush_buffer(struct tty_struct *tty);
518static void tx_hold(struct tty_struct *tty);
519static void tx_release(struct tty_struct *tty);
520
521static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
522static int chars_in_buffer(struct tty_struct *tty);
523static void throttle(struct tty_struct * tty);
524static void unthrottle(struct tty_struct * tty);
525static int set_break(struct tty_struct *tty, int break_state);
526
527#if SYNCLINK_GENERIC_HDLC
528#define dev_to_port(D) (dev_to_hdlc(D)->priv)
529static void hdlcdev_tx_done(SLMP_INFO *info);
530static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
531static int hdlcdev_init(SLMP_INFO *info);
532static void hdlcdev_exit(SLMP_INFO *info);
533#endif
534
535/* ioctl handlers */
536
537static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
538static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
539static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
540static int get_txidle(SLMP_INFO *info, int __user *idle_mode);
541static int set_txidle(SLMP_INFO *info, int idle_mode);
542static int tx_enable(SLMP_INFO *info, int enable);
543static int tx_abort(SLMP_INFO *info);
544static int rx_enable(SLMP_INFO *info, int enable);
545static int modem_input_wait(SLMP_INFO *info,int arg);
546static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
547static int tiocmget(struct tty_struct *tty);
548static int tiocmset(struct tty_struct *tty,
549 unsigned int set, unsigned int clear);
550static int set_break(struct tty_struct *tty, int break_state);
551
552static int add_device(SLMP_INFO *info);
553static int device_init(int adapter_num, struct pci_dev *pdev);
554static int claim_resources(SLMP_INFO *info);
555static void release_resources(SLMP_INFO *info);
556
557static int startup(SLMP_INFO *info);
558static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
559static int carrier_raised(struct tty_port *port);
560static void shutdown(SLMP_INFO *info);
561static void program_hw(SLMP_INFO *info);
562static void change_params(SLMP_INFO *info);
563
564static bool init_adapter(SLMP_INFO *info);
565static bool register_test(SLMP_INFO *info);
566static bool irq_test(SLMP_INFO *info);
567static bool loopback_test(SLMP_INFO *info);
568static int adapter_test(SLMP_INFO *info);
569static bool memory_test(SLMP_INFO *info);
570
571static void reset_adapter(SLMP_INFO *info);
572static void reset_port(SLMP_INFO *info);
573static void async_mode(SLMP_INFO *info);
574static void hdlc_mode(SLMP_INFO *info);
575
576static void rx_stop(SLMP_INFO *info);
577static void rx_start(SLMP_INFO *info);
578static void rx_reset_buffers(SLMP_INFO *info);
579static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
580static bool rx_get_frame(SLMP_INFO *info);
581
582static void tx_start(SLMP_INFO *info);
583static void tx_stop(SLMP_INFO *info);
584static void tx_load_fifo(SLMP_INFO *info);
585static void tx_set_idle(SLMP_INFO *info);
586static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
587
588static void get_signals(SLMP_INFO *info);
589static void set_signals(SLMP_INFO *info);
590static void enable_loopback(SLMP_INFO *info, int enable);
591static void set_rate(SLMP_INFO *info, u32 data_rate);
592
593static int bh_action(SLMP_INFO *info);
594static void bh_handler(struct work_struct *work);
595static void bh_receive(SLMP_INFO *info);
596static void bh_transmit(SLMP_INFO *info);
597static void bh_status(SLMP_INFO *info);
598static void isr_timer(SLMP_INFO *info);
599static void isr_rxint(SLMP_INFO *info);
600static void isr_rxrdy(SLMP_INFO *info);
601static void isr_txint(SLMP_INFO *info);
602static void isr_txrdy(SLMP_INFO *info);
603static void isr_rxdmaok(SLMP_INFO *info);
604static void isr_rxdmaerror(SLMP_INFO *info);
605static void isr_txdmaok(SLMP_INFO *info);
606static void isr_txdmaerror(SLMP_INFO *info);
607static void isr_io_pin(SLMP_INFO *info, u16 status);
608
609static int alloc_dma_bufs(SLMP_INFO *info);
610static void free_dma_bufs(SLMP_INFO *info);
611static int alloc_buf_list(SLMP_INFO *info);
612static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
613static int alloc_tmp_rx_buf(SLMP_INFO *info);
614static void free_tmp_rx_buf(SLMP_INFO *info);
615
616static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
617static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
618static void tx_timeout(struct timer_list *t);
619static void status_timeout(struct timer_list *t);
620
621static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
622static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
623static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
624static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
625static unsigned char read_status_reg(SLMP_INFO * info);
626static void write_control_reg(SLMP_INFO * info);
627
628
629static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes
630static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes
631static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
632
633static u32 misc_ctrl_value = 0x007e4040;
634static u32 lcr1_brdr_value = 0x00800028;
635
636static u32 read_ahead_count = 8;
637
638/* DPCR, DMA Priority Control
639 *
640 * 07..05 Not used, must be 0
641 * 04 BRC, bus release condition: 0=all transfers complete
642 * 1=release after 1 xfer on all channels
643 * 03 CCC, channel change condition: 0=every cycle
644 * 1=after each channel completes all xfers
645 * 02..00 PR<2..0>, priority 100=round robin
646 *
647 * 00000100 = 0x00
648 */
649static unsigned char dma_priority = 0x04;
650
651// Number of bytes that can be written to shared RAM
652// in a single write operation
653static u32 sca_pci_load_interval = 64;
654
655/*
656 * 1st function defined in .text section. Calling this function in
657 * init_module() followed by a breakpoint allows a remote debugger
658 * (gdb) to get the .text address for the add-symbol-file command.
659 * This allows remote debugging of dynamically loadable modules.
660 */
661static void* synclinkmp_get_text_ptr(void);
662static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
663
664static inline int sanity_check(SLMP_INFO *info,
665 char *name, const char *routine)
666{
667#ifdef SANITY_CHECK
668 static const char *badmagic =
669 "Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
670 static const char *badinfo =
671 "Warning: null synclinkmp_struct for (%s) in %s\n";
672
673 if (!info) {
674 printk(badinfo, name, routine);
675 return 1;
676 }
677 if (info->magic != MGSL_MAGIC) {
678 printk(badmagic, name, routine);
679 return 1;
680 }
681#else
682 if (!info)
683 return 1;
684#endif
685 return 0;
686}
687
688/**
689 * line discipline callback wrappers
690 *
691 * The wrappers maintain line discipline references
692 * while calling into the line discipline.
693 *
694 * ldisc_receive_buf - pass receive data to line discipline
695 */
696
697static void ldisc_receive_buf(struct tty_struct *tty,
698 const __u8 *data, char *flags, int count)
699{
700 struct tty_ldisc *ld;
701 if (!tty)
702 return;
703 ld = tty_ldisc_ref(tty);
704 if (ld) {
705 if (ld->ops->receive_buf)
706 ld->ops->receive_buf(tty, data, flags, count);
707 tty_ldisc_deref(ld);
708 }
709}
710
711/* tty callbacks */
712
713static int install(struct tty_driver *driver, struct tty_struct *tty)
714{
715 SLMP_INFO *info;
716 int line = tty->index;
717
718 if (line >= synclinkmp_device_count) {
719 printk("%s(%d): open with invalid line #%d.\n",
720 __FILE__,__LINE__,line);
721 return -ENODEV;
722 }
723
724 info = synclinkmp_device_list;
725 while (info && info->line != line)
726 info = info->next_device;
727 if (sanity_check(info, tty->name, "open"))
728 return -ENODEV;
729 if (info->init_error) {
730 printk("%s(%d):%s device is not allocated, init error=%d\n",
731 __FILE__, __LINE__, info->device_name,
732 info->init_error);
733 return -ENODEV;
734 }
735
736 tty->driver_data = info;
737
738 return tty_port_install(&info->port, driver, tty);
739}
740
741/* Called when a port is opened. Init and enable port.
742 */
743static int open(struct tty_struct *tty, struct file *filp)
744{
745 SLMP_INFO *info = tty->driver_data;
746 unsigned long flags;
747 int retval;
748
749 info->port.tty = tty;
750
751 if (debug_level >= DEBUG_LEVEL_INFO)
752 printk("%s(%d):%s open(), old ref count = %d\n",
753 __FILE__,__LINE__,tty->driver->name, info->port.count);
754
755 info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
756
757 spin_lock_irqsave(&info->netlock, flags);
758 if (info->netcount) {
759 retval = -EBUSY;
760 spin_unlock_irqrestore(&info->netlock, flags);
761 goto cleanup;
762 }
763 info->port.count++;
764 spin_unlock_irqrestore(&info->netlock, flags);
765
766 if (info->port.count == 1) {
767 /* 1st open on this device, init hardware */
768 retval = startup(info);
769 if (retval < 0)
770 goto cleanup;
771 }
772
773 retval = block_til_ready(tty, filp, info);
774 if (retval) {
775 if (debug_level >= DEBUG_LEVEL_INFO)
776 printk("%s(%d):%s block_til_ready() returned %d\n",
777 __FILE__,__LINE__, info->device_name, retval);
778 goto cleanup;
779 }
780
781 if (debug_level >= DEBUG_LEVEL_INFO)
782 printk("%s(%d):%s open() success\n",
783 __FILE__,__LINE__, info->device_name);
784 retval = 0;
785
786cleanup:
787 if (retval) {
788 if (tty->count == 1)
789 info->port.tty = NULL; /* tty layer will release tty struct */
790 if(info->port.count)
791 info->port.count--;
792 }
793
794 return retval;
795}
796
797/* Called when port is closed. Wait for remaining data to be
798 * sent. Disable port and free resources.
799 */
800static void close(struct tty_struct *tty, struct file *filp)
801{
802 SLMP_INFO * info = tty->driver_data;
803
804 if (sanity_check(info, tty->name, "close"))
805 return;
806
807 if (debug_level >= DEBUG_LEVEL_INFO)
808 printk("%s(%d):%s close() entry, count=%d\n",
809 __FILE__,__LINE__, info->device_name, info->port.count);
810
811 if (tty_port_close_start(&info->port, tty, filp) == 0)
812 goto cleanup;
813
814 mutex_lock(&info->port.mutex);
815 if (tty_port_initialized(&info->port))
816 wait_until_sent(tty, info->timeout);
817
818 flush_buffer(tty);
819 tty_ldisc_flush(tty);
820 shutdown(info);
821 mutex_unlock(&info->port.mutex);
822
823 tty_port_close_end(&info->port, tty);
824 info->port.tty = NULL;
825cleanup:
826 if (debug_level >= DEBUG_LEVEL_INFO)
827 printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
828 tty->driver->name, info->port.count);
829}
830
831/* Called by tty_hangup() when a hangup is signaled.
832 * This is the same as closing all open descriptors for the port.
833 */
834static void hangup(struct tty_struct *tty)
835{
836 SLMP_INFO *info = tty->driver_data;
837 unsigned long flags;
838
839 if (debug_level >= DEBUG_LEVEL_INFO)
840 printk("%s(%d):%s hangup()\n",
841 __FILE__,__LINE__, info->device_name );
842
843 if (sanity_check(info, tty->name, "hangup"))
844 return;
845
846 mutex_lock(&info->port.mutex);
847 flush_buffer(tty);
848 shutdown(info);
849
850 spin_lock_irqsave(&info->port.lock, flags);
851 info->port.count = 0;
852 info->port.tty = NULL;
853 spin_unlock_irqrestore(&info->port.lock, flags);
854 tty_port_set_active(&info->port, 1);
855 mutex_unlock(&info->port.mutex);
856
857 wake_up_interruptible(&info->port.open_wait);
858}
859
860/* Set new termios settings
861 */
862static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
863{
864 SLMP_INFO *info = tty->driver_data;
865 unsigned long flags;
866
867 if (debug_level >= DEBUG_LEVEL_INFO)
868 printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
869 tty->driver->name );
870
871 change_params(info);
872
873 /* Handle transition to B0 status */
874 if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
875 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
876 spin_lock_irqsave(&info->lock,flags);
877 set_signals(info);
878 spin_unlock_irqrestore(&info->lock,flags);
879 }
880
881 /* Handle transition away from B0 status */
882 if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
883 info->serial_signals |= SerialSignal_DTR;
884 if (!C_CRTSCTS(tty) || !tty_throttled(tty))
885 info->serial_signals |= SerialSignal_RTS;
886 spin_lock_irqsave(&info->lock,flags);
887 set_signals(info);
888 spin_unlock_irqrestore(&info->lock,flags);
889 }
890
891 /* Handle turning off CRTSCTS */
892 if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
893 tty->hw_stopped = 0;
894 tx_release(tty);
895 }
896}
897
898/* Send a block of data
899 *
900 * Arguments:
901 *
902 * tty pointer to tty information structure
903 * buf pointer to buffer containing send data
904 * count size of send data in bytes
905 *
906 * Return Value: number of characters written
907 */
908static int write(struct tty_struct *tty,
909 const unsigned char *buf, int count)
910{
911 int c, ret = 0;
912 SLMP_INFO *info = tty->driver_data;
913 unsigned long flags;
914
915 if (debug_level >= DEBUG_LEVEL_INFO)
916 printk("%s(%d):%s write() count=%d\n",
917 __FILE__,__LINE__,info->device_name,count);
918
919 if (sanity_check(info, tty->name, "write"))
920 goto cleanup;
921
922 if (!info->tx_buf)
923 goto cleanup;
924
925 if (info->params.mode == MGSL_MODE_HDLC) {
926 if (count > info->max_frame_size) {
927 ret = -EIO;
928 goto cleanup;
929 }
930 if (info->tx_active)
931 goto cleanup;
932 if (info->tx_count) {
933 /* send accumulated data from send_char() calls */
934 /* as frame and wait before accepting more data. */
935 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
936 goto start;
937 }
938 ret = info->tx_count = count;
939 tx_load_dma_buffer(info, buf, count);
940 goto start;
941 }
942
943 for (;;) {
944 c = min_t(int, count,
945 min(info->max_frame_size - info->tx_count - 1,
946 info->max_frame_size - info->tx_put));
947 if (c <= 0)
948 break;
949
950 memcpy(info->tx_buf + info->tx_put, buf, c);
951
952 spin_lock_irqsave(&info->lock,flags);
953 info->tx_put += c;
954 if (info->tx_put >= info->max_frame_size)
955 info->tx_put -= info->max_frame_size;
956 info->tx_count += c;
957 spin_unlock_irqrestore(&info->lock,flags);
958
959 buf += c;
960 count -= c;
961 ret += c;
962 }
963
964 if (info->params.mode == MGSL_MODE_HDLC) {
965 if (count) {
966 ret = info->tx_count = 0;
967 goto cleanup;
968 }
969 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
970 }
971start:
972 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
973 spin_lock_irqsave(&info->lock,flags);
974 if (!info->tx_active)
975 tx_start(info);
976 spin_unlock_irqrestore(&info->lock,flags);
977 }
978
979cleanup:
980 if (debug_level >= DEBUG_LEVEL_INFO)
981 printk( "%s(%d):%s write() returning=%d\n",
982 __FILE__,__LINE__,info->device_name,ret);
983 return ret;
984}
985
986/* Add a character to the transmit buffer.
987 */
988static int put_char(struct tty_struct *tty, unsigned char ch)
989{
990 SLMP_INFO *info = tty->driver_data;
991 unsigned long flags;
992 int ret = 0;
993
994 if ( debug_level >= DEBUG_LEVEL_INFO ) {
995 printk( "%s(%d):%s put_char(%d)\n",
996 __FILE__,__LINE__,info->device_name,ch);
997 }
998
999 if (sanity_check(info, tty->name, "put_char"))
1000 return 0;
1001
1002 if (!info->tx_buf)
1003 return 0;
1004
1005 spin_lock_irqsave(&info->lock,flags);
1006
1007 if ( (info->params.mode != MGSL_MODE_HDLC) ||
1008 !info->tx_active ) {
1009
1010 if (info->tx_count < info->max_frame_size - 1) {
1011 info->tx_buf[info->tx_put++] = ch;
1012 if (info->tx_put >= info->max_frame_size)
1013 info->tx_put -= info->max_frame_size;
1014 info->tx_count++;
1015 ret = 1;
1016 }
1017 }
1018
1019 spin_unlock_irqrestore(&info->lock,flags);
1020 return ret;
1021}
1022
1023/* Send a high-priority XON/XOFF character
1024 */
1025static void send_xchar(struct tty_struct *tty, char ch)
1026{
1027 SLMP_INFO *info = tty->driver_data;
1028 unsigned long flags;
1029
1030 if (debug_level >= DEBUG_LEVEL_INFO)
1031 printk("%s(%d):%s send_xchar(%d)\n",
1032 __FILE__,__LINE__, info->device_name, ch );
1033
1034 if (sanity_check(info, tty->name, "send_xchar"))
1035 return;
1036
1037 info->x_char = ch;
1038 if (ch) {
1039 /* Make sure transmit interrupts are on */
1040 spin_lock_irqsave(&info->lock,flags);
1041 if (!info->tx_enabled)
1042 tx_start(info);
1043 spin_unlock_irqrestore(&info->lock,flags);
1044 }
1045}
1046
1047/* Wait until the transmitter is empty.
1048 */
1049static void wait_until_sent(struct tty_struct *tty, int timeout)
1050{
1051 SLMP_INFO * info = tty->driver_data;
1052 unsigned long orig_jiffies, char_time;
1053
1054 if (!info )
1055 return;
1056
1057 if (debug_level >= DEBUG_LEVEL_INFO)
1058 printk("%s(%d):%s wait_until_sent() entry\n",
1059 __FILE__,__LINE__, info->device_name );
1060
1061 if (sanity_check(info, tty->name, "wait_until_sent"))
1062 return;
1063
1064 if (!tty_port_initialized(&info->port))
1065 goto exit;
1066
1067 orig_jiffies = jiffies;
1068
1069 /* Set check interval to 1/5 of estimated time to
1070 * send a character, and make it at least 1. The check
1071 * interval should also be less than the timeout.
1072 * Note: use tight timings here to satisfy the NIST-PCTS.
1073 */
1074
1075 if ( info->params.data_rate ) {
1076 char_time = info->timeout/(32 * 5);
1077 if (!char_time)
1078 char_time++;
1079 } else
1080 char_time = 1;
1081
1082 if (timeout)
1083 char_time = min_t(unsigned long, char_time, timeout);
1084
1085 if ( info->params.mode == MGSL_MODE_HDLC ) {
1086 while (info->tx_active) {
1087 msleep_interruptible(jiffies_to_msecs(char_time));
1088 if (signal_pending(current))
1089 break;
1090 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1091 break;
1092 }
1093 } else {
1094 /*
1095 * TODO: determine if there is something similar to USC16C32
1096 * TXSTATUS_ALL_SENT status
1097 */
1098 while ( info->tx_active && info->tx_enabled) {
1099 msleep_interruptible(jiffies_to_msecs(char_time));
1100 if (signal_pending(current))
1101 break;
1102 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1103 break;
1104 }
1105 }
1106
1107exit:
1108 if (debug_level >= DEBUG_LEVEL_INFO)
1109 printk("%s(%d):%s wait_until_sent() exit\n",
1110 __FILE__,__LINE__, info->device_name );
1111}
1112
1113/* Return the count of free bytes in transmit buffer
1114 */
1115static int write_room(struct tty_struct *tty)
1116{
1117 SLMP_INFO *info = tty->driver_data;
1118 int ret;
1119
1120 if (sanity_check(info, tty->name, "write_room"))
1121 return 0;
1122
1123 if (info->params.mode == MGSL_MODE_HDLC) {
1124 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1125 } else {
1126 ret = info->max_frame_size - info->tx_count - 1;
1127 if (ret < 0)
1128 ret = 0;
1129 }
1130
1131 if (debug_level >= DEBUG_LEVEL_INFO)
1132 printk("%s(%d):%s write_room()=%d\n",
1133 __FILE__, __LINE__, info->device_name, ret);
1134
1135 return ret;
1136}
1137
1138/* enable transmitter and send remaining buffered characters
1139 */
1140static void flush_chars(struct tty_struct *tty)
1141{
1142 SLMP_INFO *info = tty->driver_data;
1143 unsigned long flags;
1144
1145 if ( debug_level >= DEBUG_LEVEL_INFO )
1146 printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
1147 __FILE__,__LINE__,info->device_name,info->tx_count);
1148
1149 if (sanity_check(info, tty->name, "flush_chars"))
1150 return;
1151
1152 if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
1153 !info->tx_buf)
1154 return;
1155
1156 if ( debug_level >= DEBUG_LEVEL_INFO )
1157 printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
1158 __FILE__,__LINE__,info->device_name );
1159
1160 spin_lock_irqsave(&info->lock,flags);
1161
1162 if (!info->tx_active) {
1163 if ( (info->params.mode == MGSL_MODE_HDLC) &&
1164 info->tx_count ) {
1165 /* operating in synchronous (frame oriented) mode */
1166 /* copy data from circular tx_buf to */
1167 /* transmit DMA buffer. */
1168 tx_load_dma_buffer(info,
1169 info->tx_buf,info->tx_count);
1170 }
1171 tx_start(info);
1172 }
1173
1174 spin_unlock_irqrestore(&info->lock,flags);
1175}
1176
1177/* Discard all data in the send buffer
1178 */
1179static void flush_buffer(struct tty_struct *tty)
1180{
1181 SLMP_INFO *info = tty->driver_data;
1182 unsigned long flags;
1183
1184 if (debug_level >= DEBUG_LEVEL_INFO)
1185 printk("%s(%d):%s flush_buffer() entry\n",
1186 __FILE__,__LINE__, info->device_name );
1187
1188 if (sanity_check(info, tty->name, "flush_buffer"))
1189 return;
1190
1191 spin_lock_irqsave(&info->lock,flags);
1192 info->tx_count = info->tx_put = info->tx_get = 0;
1193 del_timer(&info->tx_timer);
1194 spin_unlock_irqrestore(&info->lock,flags);
1195
1196 tty_wakeup(tty);
1197}
1198
1199/* throttle (stop) transmitter
1200 */
1201static void tx_hold(struct tty_struct *tty)
1202{
1203 SLMP_INFO *info = tty->driver_data;
1204 unsigned long flags;
1205
1206 if (sanity_check(info, tty->name, "tx_hold"))
1207 return;
1208
1209 if ( debug_level >= DEBUG_LEVEL_INFO )
1210 printk("%s(%d):%s tx_hold()\n",
1211 __FILE__,__LINE__,info->device_name);
1212
1213 spin_lock_irqsave(&info->lock,flags);
1214 if (info->tx_enabled)
1215 tx_stop(info);
1216 spin_unlock_irqrestore(&info->lock,flags);
1217}
1218
1219/* release (start) transmitter
1220 */
1221static void tx_release(struct tty_struct *tty)
1222{
1223 SLMP_INFO *info = tty->driver_data;
1224 unsigned long flags;
1225
1226 if (sanity_check(info, tty->name, "tx_release"))
1227 return;
1228
1229 if ( debug_level >= DEBUG_LEVEL_INFO )
1230 printk("%s(%d):%s tx_release()\n",
1231 __FILE__,__LINE__,info->device_name);
1232
1233 spin_lock_irqsave(&info->lock,flags);
1234 if (!info->tx_enabled)
1235 tx_start(info);
1236 spin_unlock_irqrestore(&info->lock,flags);
1237}
1238
1239/* Service an IOCTL request
1240 *
1241 * Arguments:
1242 *
1243 * tty pointer to tty instance data
1244 * cmd IOCTL command code
1245 * arg command argument/context
1246 *
1247 * Return Value: 0 if success, otherwise error code
1248 */
1249static int ioctl(struct tty_struct *tty,
1250 unsigned int cmd, unsigned long arg)
1251{
1252 SLMP_INFO *info = tty->driver_data;
1253 void __user *argp = (void __user *)arg;
1254
1255 if (debug_level >= DEBUG_LEVEL_INFO)
1256 printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
1257 info->device_name, cmd );
1258
1259 if (sanity_check(info, tty->name, "ioctl"))
1260 return -ENODEV;
1261
1262 if (cmd != TIOCMIWAIT) {
1263 if (tty_io_error(tty))
1264 return -EIO;
1265 }
1266
1267 switch (cmd) {
1268 case MGSL_IOCGPARAMS:
1269 return get_params(info, argp);
1270 case MGSL_IOCSPARAMS:
1271 return set_params(info, argp);
1272 case MGSL_IOCGTXIDLE:
1273 return get_txidle(info, argp);
1274 case MGSL_IOCSTXIDLE:
1275 return set_txidle(info, (int)arg);
1276 case MGSL_IOCTXENABLE:
1277 return tx_enable(info, (int)arg);
1278 case MGSL_IOCRXENABLE:
1279 return rx_enable(info, (int)arg);
1280 case MGSL_IOCTXABORT:
1281 return tx_abort(info);
1282 case MGSL_IOCGSTATS:
1283 return get_stats(info, argp);
1284 case MGSL_IOCWAITEVENT:
1285 return wait_mgsl_event(info, argp);
1286 case MGSL_IOCLOOPTXDONE:
1287 return 0; // TODO: Not supported, need to document
1288 /* Wait for modem input (DCD,RI,DSR,CTS) change
1289 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
1290 */
1291 case TIOCMIWAIT:
1292 return modem_input_wait(info,(int)arg);
1293
1294 /*
1295 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1296 * Return: write counters to the user passed counter struct
1297 * NB: both 1->0 and 0->1 transitions are counted except for
1298 * RI where only 0->1 is counted.
1299 */
1300 default:
1301 return -ENOIOCTLCMD;
1302 }
1303 return 0;
1304}
1305
1306static int get_icount(struct tty_struct *tty,
1307 struct serial_icounter_struct *icount)
1308{
1309 SLMP_INFO *info = tty->driver_data;
1310 struct mgsl_icount cnow; /* kernel counter temps */
1311 unsigned long flags;
1312
1313 spin_lock_irqsave(&info->lock,flags);
1314 cnow = info->icount;
1315 spin_unlock_irqrestore(&info->lock,flags);
1316
1317 icount->cts = cnow.cts;
1318 icount->dsr = cnow.dsr;
1319 icount->rng = cnow.rng;
1320 icount->dcd = cnow.dcd;
1321 icount->rx = cnow.rx;
1322 icount->tx = cnow.tx;
1323 icount->frame = cnow.frame;
1324 icount->overrun = cnow.overrun;
1325 icount->parity = cnow.parity;
1326 icount->brk = cnow.brk;
1327 icount->buf_overrun = cnow.buf_overrun;
1328
1329 return 0;
1330}
1331
1332/*
1333 * /proc fs routines....
1334 */
1335
1336static inline void line_info(struct seq_file *m, SLMP_INFO *info)
1337{
1338 char stat_buf[30];
1339 unsigned long flags;
1340
1341 seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
1342 "\tIRQ=%d MaxFrameSize=%u\n",
1343 info->device_name,
1344 info->phys_sca_base,
1345 info->phys_memory_base,
1346 info->phys_statctrl_base,
1347 info->phys_lcr_base,
1348 info->irq_level,
1349 info->max_frame_size );
1350
1351 /* output current serial signal states */
1352 spin_lock_irqsave(&info->lock,flags);
1353 get_signals(info);
1354 spin_unlock_irqrestore(&info->lock,flags);
1355
1356 stat_buf[0] = 0;
1357 stat_buf[1] = 0;
1358 if (info->serial_signals & SerialSignal_RTS)
1359 strcat(stat_buf, "|RTS");
1360 if (info->serial_signals & SerialSignal_CTS)
1361 strcat(stat_buf, "|CTS");
1362 if (info->serial_signals & SerialSignal_DTR)
1363 strcat(stat_buf, "|DTR");
1364 if (info->serial_signals & SerialSignal_DSR)
1365 strcat(stat_buf, "|DSR");
1366 if (info->serial_signals & SerialSignal_DCD)
1367 strcat(stat_buf, "|CD");
1368 if (info->serial_signals & SerialSignal_RI)
1369 strcat(stat_buf, "|RI");
1370
1371 if (info->params.mode == MGSL_MODE_HDLC) {
1372 seq_printf(m, "\tHDLC txok:%d rxok:%d",
1373 info->icount.txok, info->icount.rxok);
1374 if (info->icount.txunder)
1375 seq_printf(m, " txunder:%d", info->icount.txunder);
1376 if (info->icount.txabort)
1377 seq_printf(m, " txabort:%d", info->icount.txabort);
1378 if (info->icount.rxshort)
1379 seq_printf(m, " rxshort:%d", info->icount.rxshort);
1380 if (info->icount.rxlong)
1381 seq_printf(m, " rxlong:%d", info->icount.rxlong);
1382 if (info->icount.rxover)
1383 seq_printf(m, " rxover:%d", info->icount.rxover);
1384 if (info->icount.rxcrc)
1385 seq_printf(m, " rxlong:%d", info->icount.rxcrc);
1386 } else {
1387 seq_printf(m, "\tASYNC tx:%d rx:%d",
1388 info->icount.tx, info->icount.rx);
1389 if (info->icount.frame)
1390 seq_printf(m, " fe:%d", info->icount.frame);
1391 if (info->icount.parity)
1392 seq_printf(m, " pe:%d", info->icount.parity);
1393 if (info->icount.brk)
1394 seq_printf(m, " brk:%d", info->icount.brk);
1395 if (info->icount.overrun)
1396 seq_printf(m, " oe:%d", info->icount.overrun);
1397 }
1398
1399 /* Append serial signal status to end */
1400 seq_printf(m, " %s\n", stat_buf+1);
1401
1402 seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1403 info->tx_active,info->bh_requested,info->bh_running,
1404 info->pending_bh);
1405}
1406
1407/* Called to print information about devices
1408 */
1409static int synclinkmp_proc_show(struct seq_file *m, void *v)
1410{
1411 SLMP_INFO *info;
1412
1413 seq_printf(m, "synclinkmp driver:%s\n", driver_version);
1414
1415 info = synclinkmp_device_list;
1416 while( info ) {
1417 line_info(m, info);
1418 info = info->next_device;
1419 }
1420 return 0;
1421}
1422
1423/* Return the count of bytes in transmit buffer
1424 */
1425static int chars_in_buffer(struct tty_struct *tty)
1426{
1427 SLMP_INFO *info = tty->driver_data;
1428
1429 if (sanity_check(info, tty->name, "chars_in_buffer"))
1430 return 0;
1431
1432 if (debug_level >= DEBUG_LEVEL_INFO)
1433 printk("%s(%d):%s chars_in_buffer()=%d\n",
1434 __FILE__, __LINE__, info->device_name, info->tx_count);
1435
1436 return info->tx_count;
1437}
1438
1439/* Signal remote device to throttle send data (our receive data)
1440 */
1441static void throttle(struct tty_struct * tty)
1442{
1443 SLMP_INFO *info = tty->driver_data;
1444 unsigned long flags;
1445
1446 if (debug_level >= DEBUG_LEVEL_INFO)
1447 printk("%s(%d):%s throttle() entry\n",
1448 __FILE__,__LINE__, info->device_name );
1449
1450 if (sanity_check(info, tty->name, "throttle"))
1451 return;
1452
1453 if (I_IXOFF(tty))
1454 send_xchar(tty, STOP_CHAR(tty));
1455
1456 if (C_CRTSCTS(tty)) {
1457 spin_lock_irqsave(&info->lock,flags);
1458 info->serial_signals &= ~SerialSignal_RTS;
1459 set_signals(info);
1460 spin_unlock_irqrestore(&info->lock,flags);
1461 }
1462}
1463
1464/* Signal remote device to stop throttling send data (our receive data)
1465 */
1466static void unthrottle(struct tty_struct * tty)
1467{
1468 SLMP_INFO *info = tty->driver_data;
1469 unsigned long flags;
1470
1471 if (debug_level >= DEBUG_LEVEL_INFO)
1472 printk("%s(%d):%s unthrottle() entry\n",
1473 __FILE__,__LINE__, info->device_name );
1474
1475 if (sanity_check(info, tty->name, "unthrottle"))
1476 return;
1477
1478 if (I_IXOFF(tty)) {
1479 if (info->x_char)
1480 info->x_char = 0;
1481 else
1482 send_xchar(tty, START_CHAR(tty));
1483 }
1484
1485 if (C_CRTSCTS(tty)) {
1486 spin_lock_irqsave(&info->lock,flags);
1487 info->serial_signals |= SerialSignal_RTS;
1488 set_signals(info);
1489 spin_unlock_irqrestore(&info->lock,flags);
1490 }
1491}
1492
1493/* set or clear transmit break condition
1494 * break_state -1=set break condition, 0=clear
1495 */
1496static int set_break(struct tty_struct *tty, int break_state)
1497{
1498 unsigned char RegValue;
1499 SLMP_INFO * info = tty->driver_data;
1500 unsigned long flags;
1501
1502 if (debug_level >= DEBUG_LEVEL_INFO)
1503 printk("%s(%d):%s set_break(%d)\n",
1504 __FILE__,__LINE__, info->device_name, break_state);
1505
1506 if (sanity_check(info, tty->name, "set_break"))
1507 return -EINVAL;
1508
1509 spin_lock_irqsave(&info->lock,flags);
1510 RegValue = read_reg(info, CTL);
1511 if (break_state == -1)
1512 RegValue |= BIT3;
1513 else
1514 RegValue &= ~BIT3;
1515 write_reg(info, CTL, RegValue);
1516 spin_unlock_irqrestore(&info->lock,flags);
1517 return 0;
1518}
1519
1520#if SYNCLINK_GENERIC_HDLC
1521
1522/**
1523 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1524 * set encoding and frame check sequence (FCS) options
1525 *
1526 * dev pointer to network device structure
1527 * encoding serial encoding setting
1528 * parity FCS setting
1529 *
1530 * returns 0 if success, otherwise error code
1531 */
1532static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1533 unsigned short parity)
1534{
1535 SLMP_INFO *info = dev_to_port(dev);
1536 unsigned char new_encoding;
1537 unsigned short new_crctype;
1538
1539 /* return error if TTY interface open */
1540 if (info->port.count)
1541 return -EBUSY;
1542
1543 switch (encoding)
1544 {
1545 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1546 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1547 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1548 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1549 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1550 default: return -EINVAL;
1551 }
1552
1553 switch (parity)
1554 {
1555 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1556 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1557 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1558 default: return -EINVAL;
1559 }
1560
1561 info->params.encoding = new_encoding;
1562 info->params.crc_type = new_crctype;
1563
1564 /* if network interface up, reprogram hardware */
1565 if (info->netcount)
1566 program_hw(info);
1567
1568 return 0;
1569}
1570
1571/**
1572 * called by generic HDLC layer to send frame
1573 *
1574 * skb socket buffer containing HDLC frame
1575 * dev pointer to network device structure
1576 */
1577static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
1578 struct net_device *dev)
1579{
1580 SLMP_INFO *info = dev_to_port(dev);
1581 unsigned long flags;
1582
1583 if (debug_level >= DEBUG_LEVEL_INFO)
1584 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
1585
1586 /* stop sending until this frame completes */
1587 netif_stop_queue(dev);
1588
1589 /* copy data to device buffers */
1590 info->tx_count = skb->len;
1591 tx_load_dma_buffer(info, skb->data, skb->len);
1592
1593 /* update network statistics */
1594 dev->stats.tx_packets++;
1595 dev->stats.tx_bytes += skb->len;
1596
1597 /* done with socket buffer, so free it */
1598 dev_kfree_skb(skb);
1599
1600 /* save start time for transmit timeout detection */
1601 netif_trans_update(dev);
1602
1603 /* start hardware transmitter if necessary */
1604 spin_lock_irqsave(&info->lock,flags);
1605 if (!info->tx_active)
1606 tx_start(info);
1607 spin_unlock_irqrestore(&info->lock,flags);
1608
1609 return NETDEV_TX_OK;
1610}
1611
1612/**
1613 * called by network layer when interface enabled
1614 * claim resources and initialize hardware
1615 *
1616 * dev pointer to network device structure
1617 *
1618 * returns 0 if success, otherwise error code
1619 */
1620static int hdlcdev_open(struct net_device *dev)
1621{
1622 SLMP_INFO *info = dev_to_port(dev);
1623 int rc;
1624 unsigned long flags;
1625
1626 if (debug_level >= DEBUG_LEVEL_INFO)
1627 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
1628
1629 /* generic HDLC layer open processing */
1630 rc = hdlc_open(dev);
1631 if (rc)
1632 return rc;
1633
1634 /* arbitrate between network and tty opens */
1635 spin_lock_irqsave(&info->netlock, flags);
1636 if (info->port.count != 0 || info->netcount != 0) {
1637 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
1638 spin_unlock_irqrestore(&info->netlock, flags);
1639 return -EBUSY;
1640 }
1641 info->netcount=1;
1642 spin_unlock_irqrestore(&info->netlock, flags);
1643
1644 /* claim resources and init adapter */
1645 if ((rc = startup(info)) != 0) {
1646 spin_lock_irqsave(&info->netlock, flags);
1647 info->netcount=0;
1648 spin_unlock_irqrestore(&info->netlock, flags);
1649 return rc;
1650 }
1651
1652 /* assert RTS and DTR, apply hardware settings */
1653 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
1654 program_hw(info);
1655
1656 /* enable network layer transmit */
1657 netif_trans_update(dev);
1658 netif_start_queue(dev);
1659
1660 /* inform generic HDLC layer of current DCD status */
1661 spin_lock_irqsave(&info->lock, flags);
1662 get_signals(info);
1663 spin_unlock_irqrestore(&info->lock, flags);
1664 if (info->serial_signals & SerialSignal_DCD)
1665 netif_carrier_on(dev);
1666 else
1667 netif_carrier_off(dev);
1668 return 0;
1669}
1670
1671/**
1672 * called by network layer when interface is disabled
1673 * shutdown hardware and release resources
1674 *
1675 * dev pointer to network device structure
1676 *
1677 * returns 0 if success, otherwise error code
1678 */
1679static int hdlcdev_close(struct net_device *dev)
1680{
1681 SLMP_INFO *info = dev_to_port(dev);
1682 unsigned long flags;
1683
1684 if (debug_level >= DEBUG_LEVEL_INFO)
1685 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
1686
1687 netif_stop_queue(dev);
1688
1689 /* shutdown adapter and release resources */
1690 shutdown(info);
1691
1692 hdlc_close(dev);
1693
1694 spin_lock_irqsave(&info->netlock, flags);
1695 info->netcount=0;
1696 spin_unlock_irqrestore(&info->netlock, flags);
1697
1698 return 0;
1699}
1700
1701/**
1702 * called by network layer to process IOCTL call to network device
1703 *
1704 * dev pointer to network device structure
1705 * ifr pointer to network interface request structure
1706 * cmd IOCTL command code
1707 *
1708 * returns 0 if success, otherwise error code
1709 */
1710static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1711{
1712 const size_t size = sizeof(sync_serial_settings);
1713 sync_serial_settings new_line;
1714 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1715 SLMP_INFO *info = dev_to_port(dev);
1716 unsigned int flags;
1717
1718 if (debug_level >= DEBUG_LEVEL_INFO)
1719 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
1720
1721 /* return error if TTY interface open */
1722 if (info->port.count)
1723 return -EBUSY;
1724
1725 if (cmd != SIOCWANDEV)
1726 return hdlc_ioctl(dev, ifr, cmd);
1727
1728 switch(ifr->ifr_settings.type) {
1729 case IF_GET_IFACE: /* return current sync_serial_settings */
1730
1731 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1732 if (ifr->ifr_settings.size < size) {
1733 ifr->ifr_settings.size = size; /* data size wanted */
1734 return -ENOBUFS;
1735 }
1736
1737 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1738 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1739 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1740 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1741
1742 memset(&new_line, 0, sizeof(new_line));
1743 switch (flags){
1744 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1745 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1746 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1747 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1748 default: new_line.clock_type = CLOCK_DEFAULT;
1749 }
1750
1751 new_line.clock_rate = info->params.clock_speed;
1752 new_line.loopback = info->params.loopback ? 1:0;
1753
1754 if (copy_to_user(line, &new_line, size))
1755 return -EFAULT;
1756 return 0;
1757
1758 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1759
1760 if(!capable(CAP_NET_ADMIN))
1761 return -EPERM;
1762 if (copy_from_user(&new_line, line, size))
1763 return -EFAULT;
1764
1765 switch (new_line.clock_type)
1766 {
1767 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1768 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1769 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1770 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1771 case CLOCK_DEFAULT: flags = info->params.flags &
1772 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1773 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1774 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1775 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1776 default: return -EINVAL;
1777 }
1778
1779 if (new_line.loopback != 0 && new_line.loopback != 1)
1780 return -EINVAL;
1781
1782 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1783 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1784 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1785 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1786 info->params.flags |= flags;
1787
1788 info->params.loopback = new_line.loopback;
1789
1790 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1791 info->params.clock_speed = new_line.clock_rate;
1792 else
1793 info->params.clock_speed = 0;
1794
1795 /* if network interface up, reprogram hardware */
1796 if (info->netcount)
1797 program_hw(info);
1798 return 0;
1799
1800 default:
1801 return hdlc_ioctl(dev, ifr, cmd);
1802 }
1803}
1804
1805/**
1806 * called by network layer when transmit timeout is detected
1807 *
1808 * dev pointer to network device structure
1809 */
1810static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue)
1811{
1812 SLMP_INFO *info = dev_to_port(dev);
1813 unsigned long flags;
1814
1815 if (debug_level >= DEBUG_LEVEL_INFO)
1816 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
1817
1818 dev->stats.tx_errors++;
1819 dev->stats.tx_aborted_errors++;
1820
1821 spin_lock_irqsave(&info->lock,flags);
1822 tx_stop(info);
1823 spin_unlock_irqrestore(&info->lock,flags);
1824
1825 netif_wake_queue(dev);
1826}
1827
1828/**
1829 * called by device driver when transmit completes
1830 * reenable network layer transmit if stopped
1831 *
1832 * info pointer to device instance information
1833 */
1834static void hdlcdev_tx_done(SLMP_INFO *info)
1835{
1836 if (netif_queue_stopped(info->netdev))
1837 netif_wake_queue(info->netdev);
1838}
1839
1840/**
1841 * called by device driver when frame received
1842 * pass frame to network layer
1843 *
1844 * info pointer to device instance information
1845 * buf pointer to buffer contianing frame data
1846 * size count of data bytes in buf
1847 */
1848static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
1849{
1850 struct sk_buff *skb = dev_alloc_skb(size);
1851 struct net_device *dev = info->netdev;
1852
1853 if (debug_level >= DEBUG_LEVEL_INFO)
1854 printk("hdlcdev_rx(%s)\n",dev->name);
1855
1856 if (skb == NULL) {
1857 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
1858 dev->name);
1859 dev->stats.rx_dropped++;
1860 return;
1861 }
1862
1863 skb_put_data(skb, buf, size);
1864
1865 skb->protocol = hdlc_type_trans(skb, dev);
1866
1867 dev->stats.rx_packets++;
1868 dev->stats.rx_bytes += size;
1869
1870 netif_rx(skb);
1871}
1872
1873static const struct net_device_ops hdlcdev_ops = {
1874 .ndo_open = hdlcdev_open,
1875 .ndo_stop = hdlcdev_close,
1876 .ndo_start_xmit = hdlc_start_xmit,
1877 .ndo_do_ioctl = hdlcdev_ioctl,
1878 .ndo_tx_timeout = hdlcdev_tx_timeout,
1879};
1880
1881/**
1882 * called by device driver when adding device instance
1883 * do generic HDLC initialization
1884 *
1885 * info pointer to device instance information
1886 *
1887 * returns 0 if success, otherwise error code
1888 */
1889static int hdlcdev_init(SLMP_INFO *info)
1890{
1891 int rc;
1892 struct net_device *dev;
1893 hdlc_device *hdlc;
1894
1895 /* allocate and initialize network and HDLC layer objects */
1896
1897 dev = alloc_hdlcdev(info);
1898 if (!dev) {
1899 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
1900 return -ENOMEM;
1901 }
1902
1903 /* for network layer reporting purposes only */
1904 dev->mem_start = info->phys_sca_base;
1905 dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1;
1906 dev->irq = info->irq_level;
1907
1908 /* network layer callbacks and settings */
1909 dev->netdev_ops = &hdlcdev_ops;
1910 dev->watchdog_timeo = 10 * HZ;
1911 dev->tx_queue_len = 50;
1912
1913 /* generic HDLC layer callbacks and settings */
1914 hdlc = dev_to_hdlc(dev);
1915 hdlc->attach = hdlcdev_attach;
1916 hdlc->xmit = hdlcdev_xmit;
1917
1918 /* register objects with HDLC layer */
1919 rc = register_hdlc_device(dev);
1920 if (rc) {
1921 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1922 free_netdev(dev);
1923 return rc;
1924 }
1925
1926 info->netdev = dev;
1927 return 0;
1928}
1929
1930/**
1931 * called by device driver when removing device instance
1932 * do generic HDLC cleanup
1933 *
1934 * info pointer to device instance information
1935 */
1936static void hdlcdev_exit(SLMP_INFO *info)
1937{
1938 unregister_hdlc_device(info->netdev);
1939 free_netdev(info->netdev);
1940 info->netdev = NULL;
1941}
1942
1943#endif /* CONFIG_HDLC */
1944
1945
1946/* Return next bottom half action to perform.
1947 * Return Value: BH action code or 0 if nothing to do.
1948 */
1949static int bh_action(SLMP_INFO *info)
1950{
1951 unsigned long flags;
1952 int rc = 0;
1953
1954 spin_lock_irqsave(&info->lock,flags);
1955
1956 if (info->pending_bh & BH_RECEIVE) {
1957 info->pending_bh &= ~BH_RECEIVE;
1958 rc = BH_RECEIVE;
1959 } else if (info->pending_bh & BH_TRANSMIT) {
1960 info->pending_bh &= ~BH_TRANSMIT;
1961 rc = BH_TRANSMIT;
1962 } else if (info->pending_bh & BH_STATUS) {
1963 info->pending_bh &= ~BH_STATUS;
1964 rc = BH_STATUS;
1965 }
1966
1967 if (!rc) {
1968 /* Mark BH routine as complete */
1969 info->bh_running = false;
1970 info->bh_requested = false;
1971 }
1972
1973 spin_unlock_irqrestore(&info->lock,flags);
1974
1975 return rc;
1976}
1977
1978/* Perform bottom half processing of work items queued by ISR.
1979 */
1980static void bh_handler(struct work_struct *work)
1981{
1982 SLMP_INFO *info = container_of(work, SLMP_INFO, task);
1983 int action;
1984
1985 if ( debug_level >= DEBUG_LEVEL_BH )
1986 printk( "%s(%d):%s bh_handler() entry\n",
1987 __FILE__,__LINE__,info->device_name);
1988
1989 info->bh_running = true;
1990
1991 while((action = bh_action(info)) != 0) {
1992
1993 /* Process work item */
1994 if ( debug_level >= DEBUG_LEVEL_BH )
1995 printk( "%s(%d):%s bh_handler() work item action=%d\n",
1996 __FILE__,__LINE__,info->device_name, action);
1997
1998 switch (action) {
1999
2000 case BH_RECEIVE:
2001 bh_receive(info);
2002 break;
2003 case BH_TRANSMIT:
2004 bh_transmit(info);
2005 break;
2006 case BH_STATUS:
2007 bh_status(info);
2008 break;
2009 default:
2010 /* unknown work item ID */
2011 printk("%s(%d):%s Unknown work item ID=%08X!\n",
2012 __FILE__,__LINE__,info->device_name,action);
2013 break;
2014 }
2015 }
2016
2017 if ( debug_level >= DEBUG_LEVEL_BH )
2018 printk( "%s(%d):%s bh_handler() exit\n",
2019 __FILE__,__LINE__,info->device_name);
2020}
2021
2022static void bh_receive(SLMP_INFO *info)
2023{
2024 if ( debug_level >= DEBUG_LEVEL_BH )
2025 printk( "%s(%d):%s bh_receive()\n",
2026 __FILE__,__LINE__,info->device_name);
2027
2028 while( rx_get_frame(info) );
2029}
2030
2031static void bh_transmit(SLMP_INFO *info)
2032{
2033 struct tty_struct *tty = info->port.tty;
2034
2035 if ( debug_level >= DEBUG_LEVEL_BH )
2036 printk( "%s(%d):%s bh_transmit() entry\n",
2037 __FILE__,__LINE__,info->device_name);
2038
2039 if (tty)
2040 tty_wakeup(tty);
2041}
2042
2043static void bh_status(SLMP_INFO *info)
2044{
2045 if ( debug_level >= DEBUG_LEVEL_BH )
2046 printk( "%s(%d):%s bh_status() entry\n",
2047 __FILE__,__LINE__,info->device_name);
2048
2049 info->ri_chkcount = 0;
2050 info->dsr_chkcount = 0;
2051 info->dcd_chkcount = 0;
2052 info->cts_chkcount = 0;
2053}
2054
2055static void isr_timer(SLMP_INFO * info)
2056{
2057 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
2058
2059 /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
2060 write_reg(info, IER2, 0);
2061
2062 /* TMCS, Timer Control/Status Register
2063 *
2064 * 07 CMF, Compare match flag (read only) 1=match
2065 * 06 ECMI, CMF Interrupt Enable: 0=disabled
2066 * 05 Reserved, must be 0
2067 * 04 TME, Timer Enable
2068 * 03..00 Reserved, must be 0
2069 *
2070 * 0000 0000
2071 */
2072 write_reg(info, (unsigned char)(timer + TMCS), 0);
2073
2074 info->irq_occurred = true;
2075
2076 if ( debug_level >= DEBUG_LEVEL_ISR )
2077 printk("%s(%d):%s isr_timer()\n",
2078 __FILE__,__LINE__,info->device_name);
2079}
2080
2081static void isr_rxint(SLMP_INFO * info)
2082{
2083 struct tty_struct *tty = info->port.tty;
2084 struct mgsl_icount *icount = &info->icount;
2085 unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
2086 unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
2087
2088 /* clear status bits */
2089 if (status)
2090 write_reg(info, SR1, status);
2091
2092 if (status2)
2093 write_reg(info, SR2, status2);
2094
2095 if ( debug_level >= DEBUG_LEVEL_ISR )
2096 printk("%s(%d):%s isr_rxint status=%02X %02x\n",
2097 __FILE__,__LINE__,info->device_name,status,status2);
2098
2099 if (info->params.mode == MGSL_MODE_ASYNC) {
2100 if (status & BRKD) {
2101 icount->brk++;
2102
2103 /* process break detection if tty control
2104 * is not set to ignore it
2105 */
2106 if (!(status & info->ignore_status_mask1)) {
2107 if (info->read_status_mask1 & BRKD) {
2108 tty_insert_flip_char(&info->port, 0, TTY_BREAK);
2109 if (tty && (info->port.flags & ASYNC_SAK))
2110 do_SAK(tty);
2111 }
2112 }
2113 }
2114 }
2115 else {
2116 if (status & (FLGD|IDLD)) {
2117 if (status & FLGD)
2118 info->icount.exithunt++;
2119 else if (status & IDLD)
2120 info->icount.rxidle++;
2121 wake_up_interruptible(&info->event_wait_q);
2122 }
2123 }
2124
2125 if (status & CDCD) {
2126 /* simulate a common modem status change interrupt
2127 * for our handler
2128 */
2129 get_signals( info );
2130 isr_io_pin(info,
2131 MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
2132 }
2133}
2134
2135/*
2136 * handle async rx data interrupts
2137 */
2138static void isr_rxrdy(SLMP_INFO * info)
2139{
2140 u16 status;
2141 unsigned char DataByte;
2142 struct mgsl_icount *icount = &info->icount;
2143
2144 if ( debug_level >= DEBUG_LEVEL_ISR )
2145 printk("%s(%d):%s isr_rxrdy\n",
2146 __FILE__,__LINE__,info->device_name);
2147
2148 while((status = read_reg(info,CST0)) & BIT0)
2149 {
2150 int flag = 0;
2151 bool over = false;
2152 DataByte = read_reg(info,TRB);
2153
2154 icount->rx++;
2155
2156 if ( status & (PE + FRME + OVRN) ) {
2157 printk("%s(%d):%s rxerr=%04X\n",
2158 __FILE__,__LINE__,info->device_name,status);
2159
2160 /* update error statistics */
2161 if (status & PE)
2162 icount->parity++;
2163 else if (status & FRME)
2164 icount->frame++;
2165 else if (status & OVRN)
2166 icount->overrun++;
2167
2168 /* discard char if tty control flags say so */
2169 if (status & info->ignore_status_mask2)
2170 continue;
2171
2172 status &= info->read_status_mask2;
2173
2174 if (status & PE)
2175 flag = TTY_PARITY;
2176 else if (status & FRME)
2177 flag = TTY_FRAME;
2178 if (status & OVRN) {
2179 /* Overrun is special, since it's
2180 * reported immediately, and doesn't
2181 * affect the current character
2182 */
2183 over = true;
2184 }
2185 } /* end of if (error) */
2186
2187 tty_insert_flip_char(&info->port, DataByte, flag);
2188 if (over)
2189 tty_insert_flip_char(&info->port, 0, TTY_OVERRUN);
2190 }
2191
2192 if ( debug_level >= DEBUG_LEVEL_ISR ) {
2193 printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
2194 __FILE__,__LINE__,info->device_name,
2195 icount->rx,icount->brk,icount->parity,
2196 icount->frame,icount->overrun);
2197 }
2198
2199 tty_flip_buffer_push(&info->port);
2200}
2201
2202static void isr_txeom(SLMP_INFO * info, unsigned char status)
2203{
2204 if ( debug_level >= DEBUG_LEVEL_ISR )
2205 printk("%s(%d):%s isr_txeom status=%02x\n",
2206 __FILE__,__LINE__,info->device_name,status);
2207
2208 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2209 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2210 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2211
2212 if (status & UDRN) {
2213 write_reg(info, CMD, TXRESET);
2214 write_reg(info, CMD, TXENABLE);
2215 } else
2216 write_reg(info, CMD, TXBUFCLR);
2217
2218 /* disable and clear tx interrupts */
2219 info->ie0_value &= ~TXRDYE;
2220 info->ie1_value &= ~(IDLE + UDRN);
2221 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2222 write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
2223
2224 if ( info->tx_active ) {
2225 if (info->params.mode != MGSL_MODE_ASYNC) {
2226 if (status & UDRN)
2227 info->icount.txunder++;
2228 else if (status & IDLE)
2229 info->icount.txok++;
2230 }
2231
2232 info->tx_active = false;
2233 info->tx_count = info->tx_put = info->tx_get = 0;
2234
2235 del_timer(&info->tx_timer);
2236
2237 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
2238 info->serial_signals &= ~SerialSignal_RTS;
2239 info->drop_rts_on_tx_done = false;
2240 set_signals(info);
2241 }
2242
2243#if SYNCLINK_GENERIC_HDLC
2244 if (info->netcount)
2245 hdlcdev_tx_done(info);
2246 else
2247#endif
2248 {
2249 if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2250 tx_stop(info);
2251 return;
2252 }
2253 info->pending_bh |= BH_TRANSMIT;
2254 }
2255 }
2256}
2257
2258
2259/*
2260 * handle tx status interrupts
2261 */
2262static void isr_txint(SLMP_INFO * info)
2263{
2264 unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
2265
2266 /* clear status bits */
2267 write_reg(info, SR1, status);
2268
2269 if ( debug_level >= DEBUG_LEVEL_ISR )
2270 printk("%s(%d):%s isr_txint status=%02x\n",
2271 __FILE__,__LINE__,info->device_name,status);
2272
2273 if (status & (UDRN + IDLE))
2274 isr_txeom(info, status);
2275
2276 if (status & CCTS) {
2277 /* simulate a common modem status change interrupt
2278 * for our handler
2279 */
2280 get_signals( info );
2281 isr_io_pin(info,
2282 MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
2283
2284 }
2285}
2286
2287/*
2288 * handle async tx data interrupts
2289 */
2290static void isr_txrdy(SLMP_INFO * info)
2291{
2292 if ( debug_level >= DEBUG_LEVEL_ISR )
2293 printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
2294 __FILE__,__LINE__,info->device_name,info->tx_count);
2295
2296 if (info->params.mode != MGSL_MODE_ASYNC) {
2297 /* disable TXRDY IRQ, enable IDLE IRQ */
2298 info->ie0_value &= ~TXRDYE;
2299 info->ie1_value |= IDLE;
2300 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2301 return;
2302 }
2303
2304 if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2305 tx_stop(info);
2306 return;
2307 }
2308
2309 if ( info->tx_count )
2310 tx_load_fifo( info );
2311 else {
2312 info->tx_active = false;
2313 info->ie0_value &= ~TXRDYE;
2314 write_reg(info, IE0, info->ie0_value);
2315 }
2316
2317 if (info->tx_count < WAKEUP_CHARS)
2318 info->pending_bh |= BH_TRANSMIT;
2319}
2320
2321static void isr_rxdmaok(SLMP_INFO * info)
2322{
2323 /* BIT7 = EOT (end of transfer)
2324 * BIT6 = EOM (end of message/frame)
2325 */
2326 unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
2327
2328 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2329 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2330
2331 if ( debug_level >= DEBUG_LEVEL_ISR )
2332 printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
2333 __FILE__,__LINE__,info->device_name,status);
2334
2335 info->pending_bh |= BH_RECEIVE;
2336}
2337
2338static void isr_rxdmaerror(SLMP_INFO * info)
2339{
2340 /* BIT5 = BOF (buffer overflow)
2341 * BIT4 = COF (counter overflow)
2342 */
2343 unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
2344
2345 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2346 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2347
2348 if ( debug_level >= DEBUG_LEVEL_ISR )
2349 printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
2350 __FILE__,__LINE__,info->device_name,status);
2351
2352 info->rx_overflow = true;
2353 info->pending_bh |= BH_RECEIVE;
2354}
2355
2356static void isr_txdmaok(SLMP_INFO * info)
2357{
2358 unsigned char status_reg1 = read_reg(info, SR1);
2359
2360 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2361 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2362 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2363
2364 if ( debug_level >= DEBUG_LEVEL_ISR )
2365 printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
2366 __FILE__,__LINE__,info->device_name,status_reg1);
2367
2368 /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
2369 write_reg16(info, TRC0, 0);
2370 info->ie0_value |= TXRDYE;
2371 write_reg(info, IE0, info->ie0_value);
2372}
2373
2374static void isr_txdmaerror(SLMP_INFO * info)
2375{
2376 /* BIT5 = BOF (buffer overflow)
2377 * BIT4 = COF (counter overflow)
2378 */
2379 unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
2380
2381 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2382 write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
2383
2384 if ( debug_level >= DEBUG_LEVEL_ISR )
2385 printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
2386 __FILE__,__LINE__,info->device_name,status);
2387}
2388
2389/* handle input serial signal changes
2390 */
2391static void isr_io_pin( SLMP_INFO *info, u16 status )
2392{
2393 struct mgsl_icount *icount;
2394
2395 if ( debug_level >= DEBUG_LEVEL_ISR )
2396 printk("%s(%d):isr_io_pin status=%04X\n",
2397 __FILE__,__LINE__,status);
2398
2399 if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
2400 MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
2401 icount = &info->icount;
2402 /* update input line counters */
2403 if (status & MISCSTATUS_RI_LATCHED) {
2404 icount->rng++;
2405 if ( status & SerialSignal_RI )
2406 info->input_signal_events.ri_up++;
2407 else
2408 info->input_signal_events.ri_down++;
2409 }
2410 if (status & MISCSTATUS_DSR_LATCHED) {
2411 icount->dsr++;
2412 if ( status & SerialSignal_DSR )
2413 info->input_signal_events.dsr_up++;
2414 else
2415 info->input_signal_events.dsr_down++;
2416 }
2417 if (status & MISCSTATUS_DCD_LATCHED) {
2418 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2419 info->ie1_value &= ~CDCD;
2420 write_reg(info, IE1, info->ie1_value);
2421 }
2422 icount->dcd++;
2423 if (status & SerialSignal_DCD) {
2424 info->input_signal_events.dcd_up++;
2425 } else
2426 info->input_signal_events.dcd_down++;
2427#if SYNCLINK_GENERIC_HDLC
2428 if (info->netcount) {
2429 if (status & SerialSignal_DCD)
2430 netif_carrier_on(info->netdev);
2431 else
2432 netif_carrier_off(info->netdev);
2433 }
2434#endif
2435 }
2436 if (status & MISCSTATUS_CTS_LATCHED)
2437 {
2438 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2439 info->ie1_value &= ~CCTS;
2440 write_reg(info, IE1, info->ie1_value);
2441 }
2442 icount->cts++;
2443 if ( status & SerialSignal_CTS )
2444 info->input_signal_events.cts_up++;
2445 else
2446 info->input_signal_events.cts_down++;
2447 }
2448 wake_up_interruptible(&info->status_event_wait_q);
2449 wake_up_interruptible(&info->event_wait_q);
2450
2451 if (tty_port_check_carrier(&info->port) &&
2452 (status & MISCSTATUS_DCD_LATCHED) ) {
2453 if ( debug_level >= DEBUG_LEVEL_ISR )
2454 printk("%s CD now %s...", info->device_name,
2455 (status & SerialSignal_DCD) ? "on" : "off");
2456 if (status & SerialSignal_DCD)
2457 wake_up_interruptible(&info->port.open_wait);
2458 else {
2459 if ( debug_level >= DEBUG_LEVEL_ISR )
2460 printk("doing serial hangup...");
2461 if (info->port.tty)
2462 tty_hangup(info->port.tty);
2463 }
2464 }
2465
2466 if (tty_port_cts_enabled(&info->port) &&
2467 (status & MISCSTATUS_CTS_LATCHED) ) {
2468 if ( info->port.tty ) {
2469 if (info->port.tty->hw_stopped) {
2470 if (status & SerialSignal_CTS) {
2471 if ( debug_level >= DEBUG_LEVEL_ISR )
2472 printk("CTS tx start...");
2473 info->port.tty->hw_stopped = 0;
2474 tx_start(info);
2475 info->pending_bh |= BH_TRANSMIT;
2476 return;
2477 }
2478 } else {
2479 if (!(status & SerialSignal_CTS)) {
2480 if ( debug_level >= DEBUG_LEVEL_ISR )
2481 printk("CTS tx stop...");
2482 info->port.tty->hw_stopped = 1;
2483 tx_stop(info);
2484 }
2485 }
2486 }
2487 }
2488 }
2489
2490 info->pending_bh |= BH_STATUS;
2491}
2492
2493/* Interrupt service routine entry point.
2494 *
2495 * Arguments:
2496 * irq interrupt number that caused interrupt
2497 * dev_id device ID supplied during interrupt registration
2498 * regs interrupted processor context
2499 */
2500static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id)
2501{
2502 SLMP_INFO *info = dev_id;
2503 unsigned char status, status0, status1=0;
2504 unsigned char dmastatus, dmastatus0, dmastatus1=0;
2505 unsigned char timerstatus0, timerstatus1=0;
2506 unsigned char shift;
2507 unsigned int i;
2508 unsigned short tmp;
2509
2510 if ( debug_level >= DEBUG_LEVEL_ISR )
2511 printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n",
2512 __FILE__, __LINE__, info->irq_level);
2513
2514 spin_lock(&info->lock);
2515
2516 for(;;) {
2517
2518 /* get status for SCA0 (ports 0-1) */
2519 tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */
2520 status0 = (unsigned char)tmp;
2521 dmastatus0 = (unsigned char)(tmp>>8);
2522 timerstatus0 = read_reg(info, ISR2);
2523
2524 if ( debug_level >= DEBUG_LEVEL_ISR )
2525 printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
2526 __FILE__, __LINE__, info->device_name,
2527 status0, dmastatus0, timerstatus0);
2528
2529 if (info->port_count == 4) {
2530 /* get status for SCA1 (ports 2-3) */
2531 tmp = read_reg16(info->port_array[2], ISR0);
2532 status1 = (unsigned char)tmp;
2533 dmastatus1 = (unsigned char)(tmp>>8);
2534 timerstatus1 = read_reg(info->port_array[2], ISR2);
2535
2536 if ( debug_level >= DEBUG_LEVEL_ISR )
2537 printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
2538 __FILE__,__LINE__,info->device_name,
2539 status1,dmastatus1,timerstatus1);
2540 }
2541
2542 if (!status0 && !dmastatus0 && !timerstatus0 &&
2543 !status1 && !dmastatus1 && !timerstatus1)
2544 break;
2545
2546 for(i=0; i < info->port_count ; i++) {
2547 if (info->port_array[i] == NULL)
2548 continue;
2549 if (i < 2) {
2550 status = status0;
2551 dmastatus = dmastatus0;
2552 } else {
2553 status = status1;
2554 dmastatus = dmastatus1;
2555 }
2556
2557 shift = i & 1 ? 4 :0;
2558
2559 if (status & BIT0 << shift)
2560 isr_rxrdy(info->port_array[i]);
2561 if (status & BIT1 << shift)
2562 isr_txrdy(info->port_array[i]);
2563 if (status & BIT2 << shift)
2564 isr_rxint(info->port_array[i]);
2565 if (status & BIT3 << shift)
2566 isr_txint(info->port_array[i]);
2567
2568 if (dmastatus & BIT0 << shift)
2569 isr_rxdmaerror(info->port_array[i]);
2570 if (dmastatus & BIT1 << shift)
2571 isr_rxdmaok(info->port_array[i]);
2572 if (dmastatus & BIT2 << shift)
2573 isr_txdmaerror(info->port_array[i]);
2574 if (dmastatus & BIT3 << shift)
2575 isr_txdmaok(info->port_array[i]);
2576 }
2577
2578 if (timerstatus0 & (BIT5 | BIT4))
2579 isr_timer(info->port_array[0]);
2580 if (timerstatus0 & (BIT7 | BIT6))
2581 isr_timer(info->port_array[1]);
2582 if (timerstatus1 & (BIT5 | BIT4))
2583 isr_timer(info->port_array[2]);
2584 if (timerstatus1 & (BIT7 | BIT6))
2585 isr_timer(info->port_array[3]);
2586 }
2587
2588 for(i=0; i < info->port_count ; i++) {
2589 SLMP_INFO * port = info->port_array[i];
2590
2591 /* Request bottom half processing if there's something
2592 * for it to do and the bh is not already running.
2593 *
2594 * Note: startup adapter diags require interrupts.
2595 * do not request bottom half processing if the
2596 * device is not open in a normal mode.
2597 */
2598 if ( port && (port->port.count || port->netcount) &&
2599 port->pending_bh && !port->bh_running &&
2600 !port->bh_requested ) {
2601 if ( debug_level >= DEBUG_LEVEL_ISR )
2602 printk("%s(%d):%s queueing bh task.\n",
2603 __FILE__,__LINE__,port->device_name);
2604 schedule_work(&port->task);
2605 port->bh_requested = true;
2606 }
2607 }
2608
2609 spin_unlock(&info->lock);
2610
2611 if ( debug_level >= DEBUG_LEVEL_ISR )
2612 printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n",
2613 __FILE__, __LINE__, info->irq_level);
2614 return IRQ_HANDLED;
2615}
2616
2617/* Initialize and start device.
2618 */
2619static int startup(SLMP_INFO * info)
2620{
2621 if ( debug_level >= DEBUG_LEVEL_INFO )
2622 printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
2623
2624 if (tty_port_initialized(&info->port))
2625 return 0;
2626
2627 if (!info->tx_buf) {
2628 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2629 if (!info->tx_buf) {
2630 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
2631 __FILE__,__LINE__,info->device_name);
2632 return -ENOMEM;
2633 }
2634 }
2635
2636 info->pending_bh = 0;
2637
2638 memset(&info->icount, 0, sizeof(info->icount));
2639
2640 /* program hardware for current parameters */
2641 reset_port(info);
2642
2643 change_params(info);
2644
2645 mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
2646
2647 if (info->port.tty)
2648 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2649
2650 tty_port_set_initialized(&info->port, 1);
2651
2652 return 0;
2653}
2654
2655/* Called by close() and hangup() to shutdown hardware
2656 */
2657static void shutdown(SLMP_INFO * info)
2658{
2659 unsigned long flags;
2660
2661 if (!tty_port_initialized(&info->port))
2662 return;
2663
2664 if (debug_level >= DEBUG_LEVEL_INFO)
2665 printk("%s(%d):%s synclinkmp_shutdown()\n",
2666 __FILE__,__LINE__, info->device_name );
2667
2668 /* clear status wait queue because status changes */
2669 /* can't happen after shutting down the hardware */
2670 wake_up_interruptible(&info->status_event_wait_q);
2671 wake_up_interruptible(&info->event_wait_q);
2672
2673 del_timer(&info->tx_timer);
2674 del_timer(&info->status_timer);
2675
2676 kfree(info->tx_buf);
2677 info->tx_buf = NULL;
2678
2679 spin_lock_irqsave(&info->lock,flags);
2680
2681 reset_port(info);
2682
2683 if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
2684 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
2685 set_signals(info);
2686 }
2687
2688 spin_unlock_irqrestore(&info->lock,flags);
2689
2690 if (info->port.tty)
2691 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2692
2693 tty_port_set_initialized(&info->port, 0);
2694}
2695
2696static void program_hw(SLMP_INFO *info)
2697{
2698 unsigned long flags;
2699
2700 spin_lock_irqsave(&info->lock,flags);
2701
2702 rx_stop(info);
2703 tx_stop(info);
2704
2705 info->tx_count = info->tx_put = info->tx_get = 0;
2706
2707 if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
2708 hdlc_mode(info);
2709 else
2710 async_mode(info);
2711
2712 set_signals(info);
2713
2714 info->dcd_chkcount = 0;
2715 info->cts_chkcount = 0;
2716 info->ri_chkcount = 0;
2717 info->dsr_chkcount = 0;
2718
2719 info->ie1_value |= (CDCD|CCTS);
2720 write_reg(info, IE1, info->ie1_value);
2721
2722 get_signals(info);
2723
2724 if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) )
2725 rx_start(info);
2726
2727 spin_unlock_irqrestore(&info->lock,flags);
2728}
2729
2730/* Reconfigure adapter based on new parameters
2731 */
2732static void change_params(SLMP_INFO *info)
2733{
2734 unsigned cflag;
2735 int bits_per_char;
2736
2737 if (!info->port.tty)
2738 return;
2739
2740 if (debug_level >= DEBUG_LEVEL_INFO)
2741 printk("%s(%d):%s change_params()\n",
2742 __FILE__,__LINE__, info->device_name );
2743
2744 cflag = info->port.tty->termios.c_cflag;
2745
2746 /* if B0 rate (hangup) specified then negate RTS and DTR */
2747 /* otherwise assert RTS and DTR */
2748 if (cflag & CBAUD)
2749 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
2750 else
2751 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
2752
2753 /* byte size and parity */
2754
2755 switch (cflag & CSIZE) {
2756 case CS5: info->params.data_bits = 5; break;
2757 case CS6: info->params.data_bits = 6; break;
2758 case CS7: info->params.data_bits = 7; break;
2759 case CS8: info->params.data_bits = 8; break;
2760 /* Never happens, but GCC is too dumb to figure it out */
2761 default: info->params.data_bits = 7; break;
2762 }
2763
2764 if (cflag & CSTOPB)
2765 info->params.stop_bits = 2;
2766 else
2767 info->params.stop_bits = 1;
2768
2769 info->params.parity = ASYNC_PARITY_NONE;
2770 if (cflag & PARENB) {
2771 if (cflag & PARODD)
2772 info->params.parity = ASYNC_PARITY_ODD;
2773 else
2774 info->params.parity = ASYNC_PARITY_EVEN;
2775#ifdef CMSPAR
2776 if (cflag & CMSPAR)
2777 info->params.parity = ASYNC_PARITY_SPACE;
2778#endif
2779 }
2780
2781 /* calculate number of jiffies to transmit a full
2782 * FIFO (32 bytes) at specified data rate
2783 */
2784 bits_per_char = info->params.data_bits +
2785 info->params.stop_bits + 1;
2786
2787 /* if port data rate is set to 460800 or less then
2788 * allow tty settings to override, otherwise keep the
2789 * current data rate.
2790 */
2791 if (info->params.data_rate <= 460800) {
2792 info->params.data_rate = tty_get_baud_rate(info->port.tty);
2793 }
2794
2795 if ( info->params.data_rate ) {
2796 info->timeout = (32*HZ*bits_per_char) /
2797 info->params.data_rate;
2798 }
2799 info->timeout += HZ/50; /* Add .02 seconds of slop */
2800
2801 tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
2802 tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);
2803
2804 /* process tty input control flags */
2805
2806 info->read_status_mask2 = OVRN;
2807 if (I_INPCK(info->port.tty))
2808 info->read_status_mask2 |= PE | FRME;
2809 if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2810 info->read_status_mask1 |= BRKD;
2811 if (I_IGNPAR(info->port.tty))
2812 info->ignore_status_mask2 |= PE | FRME;
2813 if (I_IGNBRK(info->port.tty)) {
2814 info->ignore_status_mask1 |= BRKD;
2815 /* If ignoring parity and break indicators, ignore
2816 * overruns too. (For real raw support).
2817 */
2818 if (I_IGNPAR(info->port.tty))
2819 info->ignore_status_mask2 |= OVRN;
2820 }
2821
2822 program_hw(info);
2823}
2824
2825static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
2826{
2827 int err;
2828
2829 if (debug_level >= DEBUG_LEVEL_INFO)
2830 printk("%s(%d):%s get_params()\n",
2831 __FILE__,__LINE__, info->device_name);
2832
2833 if (!user_icount) {
2834 memset(&info->icount, 0, sizeof(info->icount));
2835 } else {
2836 mutex_lock(&info->port.mutex);
2837 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2838 mutex_unlock(&info->port.mutex);
2839 if (err)
2840 return -EFAULT;
2841 }
2842
2843 return 0;
2844}
2845
2846static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
2847{
2848 int err;
2849 if (debug_level >= DEBUG_LEVEL_INFO)
2850 printk("%s(%d):%s get_params()\n",
2851 __FILE__,__LINE__, info->device_name);
2852
2853 mutex_lock(&info->port.mutex);
2854 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2855 mutex_unlock(&info->port.mutex);
2856 if (err) {
2857 if ( debug_level >= DEBUG_LEVEL_INFO )
2858 printk( "%s(%d):%s get_params() user buffer copy failed\n",
2859 __FILE__,__LINE__,info->device_name);
2860 return -EFAULT;
2861 }
2862
2863 return 0;
2864}
2865
2866static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
2867{
2868 unsigned long flags;
2869 MGSL_PARAMS tmp_params;
2870 int err;
2871
2872 if (debug_level >= DEBUG_LEVEL_INFO)
2873 printk("%s(%d):%s set_params\n",
2874 __FILE__,__LINE__,info->device_name );
2875 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2876 if (err) {
2877 if ( debug_level >= DEBUG_LEVEL_INFO )
2878 printk( "%s(%d):%s set_params() user buffer copy failed\n",
2879 __FILE__,__LINE__,info->device_name);
2880 return -EFAULT;
2881 }
2882
2883 mutex_lock(&info->port.mutex);
2884 spin_lock_irqsave(&info->lock,flags);
2885 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2886 spin_unlock_irqrestore(&info->lock,flags);
2887
2888 change_params(info);
2889 mutex_unlock(&info->port.mutex);
2890
2891 return 0;
2892}
2893
2894static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
2895{
2896 int err;
2897
2898 if (debug_level >= DEBUG_LEVEL_INFO)
2899 printk("%s(%d):%s get_txidle()=%d\n",
2900 __FILE__,__LINE__, info->device_name, info->idle_mode);
2901
2902 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2903 if (err) {
2904 if ( debug_level >= DEBUG_LEVEL_INFO )
2905 printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
2906 __FILE__,__LINE__,info->device_name);
2907 return -EFAULT;
2908 }
2909
2910 return 0;
2911}
2912
2913static int set_txidle(SLMP_INFO * info, int idle_mode)
2914{
2915 unsigned long flags;
2916
2917 if (debug_level >= DEBUG_LEVEL_INFO)
2918 printk("%s(%d):%s set_txidle(%d)\n",
2919 __FILE__,__LINE__,info->device_name, idle_mode );
2920
2921 spin_lock_irqsave(&info->lock,flags);
2922 info->idle_mode = idle_mode;
2923 tx_set_idle( info );
2924 spin_unlock_irqrestore(&info->lock,flags);
2925 return 0;
2926}
2927
2928static int tx_enable(SLMP_INFO * info, int enable)
2929{
2930 unsigned long flags;
2931
2932 if (debug_level >= DEBUG_LEVEL_INFO)
2933 printk("%s(%d):%s tx_enable(%d)\n",
2934 __FILE__,__LINE__,info->device_name, enable);
2935
2936 spin_lock_irqsave(&info->lock,flags);
2937 if ( enable ) {
2938 if ( !info->tx_enabled ) {
2939 tx_start(info);
2940 }
2941 } else {
2942 if ( info->tx_enabled )
2943 tx_stop(info);
2944 }
2945 spin_unlock_irqrestore(&info->lock,flags);
2946 return 0;
2947}
2948
2949/* abort send HDLC frame
2950 */
2951static int tx_abort(SLMP_INFO * info)
2952{
2953 unsigned long flags;
2954
2955 if (debug_level >= DEBUG_LEVEL_INFO)
2956 printk("%s(%d):%s tx_abort()\n",
2957 __FILE__,__LINE__,info->device_name);
2958
2959 spin_lock_irqsave(&info->lock,flags);
2960 if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
2961 info->ie1_value &= ~UDRN;
2962 info->ie1_value |= IDLE;
2963 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
2964 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
2965
2966 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
2967 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2968
2969 write_reg(info, CMD, TXABORT);
2970 }
2971 spin_unlock_irqrestore(&info->lock,flags);
2972 return 0;
2973}
2974
2975static int rx_enable(SLMP_INFO * info, int enable)
2976{
2977 unsigned long flags;
2978
2979 if (debug_level >= DEBUG_LEVEL_INFO)
2980 printk("%s(%d):%s rx_enable(%d)\n",
2981 __FILE__,__LINE__,info->device_name,enable);
2982
2983 spin_lock_irqsave(&info->lock,flags);
2984 if ( enable ) {
2985 if ( !info->rx_enabled )
2986 rx_start(info);
2987 } else {
2988 if ( info->rx_enabled )
2989 rx_stop(info);
2990 }
2991 spin_unlock_irqrestore(&info->lock,flags);
2992 return 0;
2993}
2994
2995/* wait for specified event to occur
2996 */
2997static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
2998{
2999 unsigned long flags;
3000 int s;
3001 int rc=0;
3002 struct mgsl_icount cprev, cnow;
3003 int events;
3004 int mask;
3005 struct _input_signal_events oldsigs, newsigs;
3006 DECLARE_WAITQUEUE(wait, current);
3007
3008 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
3009 if (rc) {
3010 return -EFAULT;
3011 }
3012
3013 if (debug_level >= DEBUG_LEVEL_INFO)
3014 printk("%s(%d):%s wait_mgsl_event(%d)\n",
3015 __FILE__,__LINE__,info->device_name,mask);
3016
3017 spin_lock_irqsave(&info->lock,flags);
3018
3019 /* return immediately if state matches requested events */
3020 get_signals(info);
3021 s = info->serial_signals;
3022
3023 events = mask &
3024 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
3025 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
3026 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
3027 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
3028 if (events) {
3029 spin_unlock_irqrestore(&info->lock,flags);
3030 goto exit;
3031 }
3032
3033 /* save current irq counts */
3034 cprev = info->icount;
3035 oldsigs = info->input_signal_events;
3036
3037 /* enable hunt and idle irqs if needed */
3038 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
3039 unsigned char oldval = info->ie1_value;
3040 unsigned char newval = oldval +
3041 (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
3042 (mask & MgslEvent_IdleReceived ? IDLD:0);
3043 if ( oldval != newval ) {
3044 info->ie1_value = newval;
3045 write_reg(info, IE1, info->ie1_value);
3046 }
3047 }
3048
3049 set_current_state(TASK_INTERRUPTIBLE);
3050 add_wait_queue(&info->event_wait_q, &wait);
3051
3052 spin_unlock_irqrestore(&info->lock,flags);
3053
3054 for(;;) {
3055 schedule();
3056 if (signal_pending(current)) {
3057 rc = -ERESTARTSYS;
3058 break;
3059 }
3060
3061 /* get current irq counts */
3062 spin_lock_irqsave(&info->lock,flags);
3063 cnow = info->icount;
3064 newsigs = info->input_signal_events;
3065 set_current_state(TASK_INTERRUPTIBLE);
3066 spin_unlock_irqrestore(&info->lock,flags);
3067
3068 /* if no change, wait aborted for some reason */
3069 if (newsigs.dsr_up == oldsigs.dsr_up &&
3070 newsigs.dsr_down == oldsigs.dsr_down &&
3071 newsigs.dcd_up == oldsigs.dcd_up &&
3072 newsigs.dcd_down == oldsigs.dcd_down &&
3073 newsigs.cts_up == oldsigs.cts_up &&
3074 newsigs.cts_down == oldsigs.cts_down &&
3075 newsigs.ri_up == oldsigs.ri_up &&
3076 newsigs.ri_down == oldsigs.ri_down &&
3077 cnow.exithunt == cprev.exithunt &&
3078 cnow.rxidle == cprev.rxidle) {
3079 rc = -EIO;
3080 break;
3081 }
3082
3083 events = mask &
3084 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
3085 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
3086 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
3087 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
3088 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
3089 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
3090 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
3091 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
3092 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
3093 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
3094 if (events)
3095 break;
3096
3097 cprev = cnow;
3098 oldsigs = newsigs;
3099 }
3100
3101 remove_wait_queue(&info->event_wait_q, &wait);
3102 set_current_state(TASK_RUNNING);
3103
3104
3105 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
3106 spin_lock_irqsave(&info->lock,flags);
3107 if (!waitqueue_active(&info->event_wait_q)) {
3108 /* disable enable exit hunt mode/idle rcvd IRQs */
3109 info->ie1_value &= ~(FLGD|IDLD);
3110 write_reg(info, IE1, info->ie1_value);
3111 }
3112 spin_unlock_irqrestore(&info->lock,flags);
3113 }
3114exit:
3115 if ( rc == 0 )
3116 PUT_USER(rc, events, mask_ptr);
3117
3118 return rc;
3119}
3120
3121static int modem_input_wait(SLMP_INFO *info,int arg)
3122{
3123 unsigned long flags;
3124 int rc;
3125 struct mgsl_icount cprev, cnow;
3126 DECLARE_WAITQUEUE(wait, current);
3127
3128 /* save current irq counts */
3129 spin_lock_irqsave(&info->lock,flags);
3130 cprev = info->icount;
3131 add_wait_queue(&info->status_event_wait_q, &wait);
3132 set_current_state(TASK_INTERRUPTIBLE);
3133 spin_unlock_irqrestore(&info->lock,flags);
3134
3135 for(;;) {
3136 schedule();
3137 if (signal_pending(current)) {
3138 rc = -ERESTARTSYS;
3139 break;
3140 }
3141
3142 /* get new irq counts */
3143 spin_lock_irqsave(&info->lock,flags);
3144 cnow = info->icount;
3145 set_current_state(TASK_INTERRUPTIBLE);
3146 spin_unlock_irqrestore(&info->lock,flags);
3147
3148 /* if no change, wait aborted for some reason */
3149 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3150 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3151 rc = -EIO;
3152 break;
3153 }
3154
3155 /* check for change in caller specified modem input */
3156 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3157 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3158 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
3159 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3160 rc = 0;
3161 break;
3162 }
3163
3164 cprev = cnow;
3165 }
3166 remove_wait_queue(&info->status_event_wait_q, &wait);
3167 set_current_state(TASK_RUNNING);
3168 return rc;
3169}
3170
3171/* return the state of the serial control and status signals
3172 */
3173static int tiocmget(struct tty_struct *tty)
3174{
3175 SLMP_INFO *info = tty->driver_data;
3176 unsigned int result;
3177 unsigned long flags;
3178
3179 spin_lock_irqsave(&info->lock,flags);
3180 get_signals(info);
3181 spin_unlock_irqrestore(&info->lock,flags);
3182
3183 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) |
3184 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR : 0) |
3185 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR : 0) |
3186 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG : 0) |
3187 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR : 0) |
3188 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS : 0);
3189
3190 if (debug_level >= DEBUG_LEVEL_INFO)
3191 printk("%s(%d):%s tiocmget() value=%08X\n",
3192 __FILE__,__LINE__, info->device_name, result );
3193 return result;
3194}
3195
3196/* set modem control signals (DTR/RTS)
3197 */
3198static int tiocmset(struct tty_struct *tty,
3199 unsigned int set, unsigned int clear)
3200{
3201 SLMP_INFO *info = tty->driver_data;
3202 unsigned long flags;
3203
3204 if (debug_level >= DEBUG_LEVEL_INFO)
3205 printk("%s(%d):%s tiocmset(%x,%x)\n",
3206 __FILE__,__LINE__,info->device_name, set, clear);
3207
3208 if (set & TIOCM_RTS)
3209 info->serial_signals |= SerialSignal_RTS;
3210 if (set & TIOCM_DTR)
3211 info->serial_signals |= SerialSignal_DTR;
3212 if (clear & TIOCM_RTS)
3213 info->serial_signals &= ~SerialSignal_RTS;
3214 if (clear & TIOCM_DTR)
3215 info->serial_signals &= ~SerialSignal_DTR;
3216
3217 spin_lock_irqsave(&info->lock,flags);
3218 set_signals(info);
3219 spin_unlock_irqrestore(&info->lock,flags);
3220
3221 return 0;
3222}
3223
3224static int carrier_raised(struct tty_port *port)
3225{
3226 SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3227 unsigned long flags;
3228
3229 spin_lock_irqsave(&info->lock,flags);
3230 get_signals(info);
3231 spin_unlock_irqrestore(&info->lock,flags);
3232
3233 return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
3234}
3235
3236static void dtr_rts(struct tty_port *port, int on)
3237{
3238 SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3239 unsigned long flags;
3240
3241 spin_lock_irqsave(&info->lock,flags);
3242 if (on)
3243 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
3244 else
3245 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
3246 set_signals(info);
3247 spin_unlock_irqrestore(&info->lock,flags);
3248}
3249
3250/* Block the current process until the specified port is ready to open.
3251 */
3252static int block_til_ready(struct tty_struct *tty, struct file *filp,
3253 SLMP_INFO *info)
3254{
3255 DECLARE_WAITQUEUE(wait, current);
3256 int retval;
3257 bool do_clocal = false;
3258 unsigned long flags;
3259 int cd;
3260 struct tty_port *port = &info->port;
3261
3262 if (debug_level >= DEBUG_LEVEL_INFO)
3263 printk("%s(%d):%s block_til_ready()\n",
3264 __FILE__,__LINE__, tty->driver->name );
3265
3266 if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) {
3267 /* nonblock mode is set or port is not enabled */
3268 /* just verify that callout device is not active */
3269 tty_port_set_active(port, 1);
3270 return 0;
3271 }
3272
3273 if (C_CLOCAL(tty))
3274 do_clocal = true;
3275
3276 /* Wait for carrier detect and the line to become
3277 * free (i.e., not in use by the callout). While we are in
3278 * this loop, port->count is dropped by one, so that
3279 * close() knows when to free things. We restore it upon
3280 * exit, either normal or abnormal.
3281 */
3282
3283 retval = 0;
3284 add_wait_queue(&port->open_wait, &wait);
3285
3286 if (debug_level >= DEBUG_LEVEL_INFO)
3287 printk("%s(%d):%s block_til_ready() before block, count=%d\n",
3288 __FILE__,__LINE__, tty->driver->name, port->count );
3289
3290 spin_lock_irqsave(&info->lock, flags);
3291 port->count--;
3292 spin_unlock_irqrestore(&info->lock, flags);
3293 port->blocked_open++;
3294
3295 while (1) {
3296 if (C_BAUD(tty) && tty_port_initialized(port))
3297 tty_port_raise_dtr_rts(port);
3298
3299 set_current_state(TASK_INTERRUPTIBLE);
3300
3301 if (tty_hung_up_p(filp) || !tty_port_initialized(port)) {
3302 retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3303 -EAGAIN : -ERESTARTSYS;
3304 break;
3305 }
3306
3307 cd = tty_port_carrier_raised(port);
3308 if (do_clocal || cd)
3309 break;
3310
3311 if (signal_pending(current)) {
3312 retval = -ERESTARTSYS;
3313 break;
3314 }
3315
3316 if (debug_level >= DEBUG_LEVEL_INFO)
3317 printk("%s(%d):%s block_til_ready() count=%d\n",
3318 __FILE__,__LINE__, tty->driver->name, port->count );
3319
3320 tty_unlock(tty);
3321 schedule();
3322 tty_lock(tty);
3323 }
3324
3325 set_current_state(TASK_RUNNING);
3326 remove_wait_queue(&port->open_wait, &wait);
3327 if (!tty_hung_up_p(filp))
3328 port->count++;
3329 port->blocked_open--;
3330
3331 if (debug_level >= DEBUG_LEVEL_INFO)
3332 printk("%s(%d):%s block_til_ready() after, count=%d\n",
3333 __FILE__,__LINE__, tty->driver->name, port->count );
3334
3335 if (!retval)
3336 tty_port_set_active(port, 1);
3337
3338 return retval;
3339}
3340
3341static int alloc_dma_bufs(SLMP_INFO *info)
3342{
3343 unsigned short BuffersPerFrame;
3344 unsigned short BufferCount;
3345
3346 // Force allocation to start at 64K boundary for each port.
3347 // This is necessary because *all* buffer descriptors for a port
3348 // *must* be in the same 64K block. All descriptors on a port
3349 // share a common 'base' address (upper 8 bits of 24 bits) programmed
3350 // into the CBP register.
3351 info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
3352
3353 /* Calculate the number of DMA buffers necessary to hold the */
3354 /* largest allowable frame size. Note: If the max frame size is */
3355 /* not an even multiple of the DMA buffer size then we need to */
3356 /* round the buffer count per frame up one. */
3357
3358 BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
3359 if ( info->max_frame_size % SCABUFSIZE )
3360 BuffersPerFrame++;
3361
3362 /* calculate total number of data buffers (SCABUFSIZE) possible
3363 * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
3364 * for the descriptor list (BUFFERLISTSIZE).
3365 */
3366 BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
3367
3368 /* limit number of buffers to maximum amount of descriptors */
3369 if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
3370 BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
3371
3372 /* use enough buffers to transmit one max size frame */
3373 info->tx_buf_count = BuffersPerFrame + 1;
3374
3375 /* never use more than half the available buffers for transmit */
3376 if (info->tx_buf_count > (BufferCount/2))
3377 info->tx_buf_count = BufferCount/2;
3378
3379 if (info->tx_buf_count > SCAMAXDESC)
3380 info->tx_buf_count = SCAMAXDESC;
3381
3382 /* use remaining buffers for receive */
3383 info->rx_buf_count = BufferCount - info->tx_buf_count;
3384
3385 if (info->rx_buf_count > SCAMAXDESC)
3386 info->rx_buf_count = SCAMAXDESC;
3387
3388 if ( debug_level >= DEBUG_LEVEL_INFO )
3389 printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
3390 __FILE__,__LINE__, info->device_name,
3391 info->tx_buf_count,info->rx_buf_count);
3392
3393 if ( alloc_buf_list( info ) < 0 ||
3394 alloc_frame_bufs(info,
3395 info->rx_buf_list,
3396 info->rx_buf_list_ex,
3397 info->rx_buf_count) < 0 ||
3398 alloc_frame_bufs(info,
3399 info->tx_buf_list,
3400 info->tx_buf_list_ex,
3401 info->tx_buf_count) < 0 ||
3402 alloc_tmp_rx_buf(info) < 0 ) {
3403 printk("%s(%d):%s Can't allocate DMA buffer memory\n",
3404 __FILE__,__LINE__, info->device_name);
3405 return -ENOMEM;
3406 }
3407
3408 rx_reset_buffers( info );
3409
3410 return 0;
3411}
3412
3413/* Allocate DMA buffers for the transmit and receive descriptor lists.
3414 */
3415static int alloc_buf_list(SLMP_INFO *info)
3416{
3417 unsigned int i;
3418
3419 /* build list in adapter shared memory */
3420 info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
3421 info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
3422 info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
3423
3424 memset(info->buffer_list, 0, BUFFERLISTSIZE);
3425
3426 /* Save virtual address pointers to the receive and */
3427 /* transmit buffer lists. (Receive 1st). These pointers will */
3428 /* be used by the processor to access the lists. */
3429 info->rx_buf_list = (SCADESC *)info->buffer_list;
3430
3431 info->tx_buf_list = (SCADESC *)info->buffer_list;
3432 info->tx_buf_list += info->rx_buf_count;
3433
3434 /* Build links for circular buffer entry lists (tx and rx)
3435 *
3436 * Note: links are physical addresses read by the SCA device
3437 * to determine the next buffer entry to use.
3438 */
3439
3440 for ( i = 0; i < info->rx_buf_count; i++ ) {
3441 /* calculate and store physical address of this buffer entry */
3442 info->rx_buf_list_ex[i].phys_entry =
3443 info->buffer_list_phys + (i * SCABUFSIZE);
3444
3445 /* calculate and store physical address of */
3446 /* next entry in cirular list of entries */
3447 info->rx_buf_list[i].next = info->buffer_list_phys;
3448 if ( i < info->rx_buf_count - 1 )
3449 info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3450
3451 info->rx_buf_list[i].length = SCABUFSIZE;
3452 }
3453
3454 for ( i = 0; i < info->tx_buf_count; i++ ) {
3455 /* calculate and store physical address of this buffer entry */
3456 info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
3457 ((info->rx_buf_count + i) * sizeof(SCADESC));
3458
3459 /* calculate and store physical address of */
3460 /* next entry in cirular list of entries */
3461
3462 info->tx_buf_list[i].next = info->buffer_list_phys +
3463 info->rx_buf_count * sizeof(SCADESC);
3464
3465 if ( i < info->tx_buf_count - 1 )
3466 info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3467 }
3468
3469 return 0;
3470}
3471
3472/* Allocate the frame DMA buffers used by the specified buffer list.
3473 */
3474static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
3475{
3476 int i;
3477 unsigned long phys_addr;
3478
3479 for ( i = 0; i < count; i++ ) {
3480 buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
3481 phys_addr = info->port_array[0]->last_mem_alloc;
3482 info->port_array[0]->last_mem_alloc += SCABUFSIZE;
3483
3484 buf_list[i].buf_ptr = (unsigned short)phys_addr;
3485 buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
3486 }
3487
3488 return 0;
3489}
3490
3491static void free_dma_bufs(SLMP_INFO *info)
3492{
3493 info->buffer_list = NULL;
3494 info->rx_buf_list = NULL;
3495 info->tx_buf_list = NULL;
3496}
3497
3498/* allocate buffer large enough to hold max_frame_size.
3499 * This buffer is used to pass an assembled frame to the line discipline.
3500 */
3501static int alloc_tmp_rx_buf(SLMP_INFO *info)
3502{
3503 info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
3504 if (info->tmp_rx_buf == NULL)
3505 return -ENOMEM;
3506 /* unused flag buffer to satisfy receive_buf calling interface */
3507 info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
3508 if (!info->flag_buf) {
3509 kfree(info->tmp_rx_buf);
3510 info->tmp_rx_buf = NULL;
3511 return -ENOMEM;
3512 }
3513 return 0;
3514}
3515
3516static void free_tmp_rx_buf(SLMP_INFO *info)
3517{
3518 kfree(info->tmp_rx_buf);
3519 info->tmp_rx_buf = NULL;
3520 kfree(info->flag_buf);
3521 info->flag_buf = NULL;
3522}
3523
3524static int claim_resources(SLMP_INFO *info)
3525{
3526 if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
3527 printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
3528 __FILE__,__LINE__,info->device_name, info->phys_memory_base);
3529 info->init_error = DiagStatus_AddressConflict;
3530 goto errout;
3531 }
3532 else
3533 info->shared_mem_requested = true;
3534
3535 if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
3536 printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
3537 __FILE__,__LINE__,info->device_name, info->phys_lcr_base);
3538 info->init_error = DiagStatus_AddressConflict;
3539 goto errout;
3540 }
3541 else
3542 info->lcr_mem_requested = true;
3543
3544 if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
3545 printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
3546 __FILE__,__LINE__,info->device_name, info->phys_sca_base);
3547 info->init_error = DiagStatus_AddressConflict;
3548 goto errout;
3549 }
3550 else
3551 info->sca_base_requested = true;
3552
3553 if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
3554 printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
3555 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
3556 info->init_error = DiagStatus_AddressConflict;
3557 goto errout;
3558 }
3559 else
3560 info->sca_statctrl_requested = true;
3561
3562 info->memory_base = ioremap(info->phys_memory_base,
3563 SCA_MEM_SIZE);
3564 if (!info->memory_base) {
3565 printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n",
3566 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3567 info->init_error = DiagStatus_CantAssignPciResources;
3568 goto errout;
3569 }
3570
3571 info->lcr_base = ioremap(info->phys_lcr_base, PAGE_SIZE);
3572 if (!info->lcr_base) {
3573 printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n",
3574 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
3575 info->init_error = DiagStatus_CantAssignPciResources;
3576 goto errout;
3577 }
3578 info->lcr_base += info->lcr_offset;
3579
3580 info->sca_base = ioremap(info->phys_sca_base, PAGE_SIZE);
3581 if (!info->sca_base) {
3582 printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n",
3583 __FILE__,__LINE__,info->device_name, info->phys_sca_base );
3584 info->init_error = DiagStatus_CantAssignPciResources;
3585 goto errout;
3586 }
3587 info->sca_base += info->sca_offset;
3588
3589 info->statctrl_base = ioremap(info->phys_statctrl_base,
3590 PAGE_SIZE);
3591 if (!info->statctrl_base) {
3592 printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n",
3593 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
3594 info->init_error = DiagStatus_CantAssignPciResources;
3595 goto errout;
3596 }
3597 info->statctrl_base += info->statctrl_offset;
3598
3599 if ( !memory_test(info) ) {
3600 printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
3601 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3602 info->init_error = DiagStatus_MemoryError;
3603 goto errout;
3604 }
3605
3606 return 0;
3607
3608errout:
3609 release_resources( info );
3610 return -ENODEV;
3611}
3612
3613static void release_resources(SLMP_INFO *info)
3614{
3615 if ( debug_level >= DEBUG_LEVEL_INFO )
3616 printk( "%s(%d):%s release_resources() entry\n",
3617 __FILE__,__LINE__,info->device_name );
3618
3619 if ( info->irq_requested ) {
3620 free_irq(info->irq_level, info);
3621 info->irq_requested = false;
3622 }
3623
3624 if ( info->shared_mem_requested ) {
3625 release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
3626 info->shared_mem_requested = false;
3627 }
3628 if ( info->lcr_mem_requested ) {
3629 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
3630 info->lcr_mem_requested = false;
3631 }
3632 if ( info->sca_base_requested ) {
3633 release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
3634 info->sca_base_requested = false;
3635 }
3636 if ( info->sca_statctrl_requested ) {
3637 release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
3638 info->sca_statctrl_requested = false;
3639 }
3640
3641 if (info->memory_base){
3642 iounmap(info->memory_base);
3643 info->memory_base = NULL;
3644 }
3645
3646 if (info->sca_base) {
3647 iounmap(info->sca_base - info->sca_offset);
3648 info->sca_base=NULL;
3649 }
3650
3651 if (info->statctrl_base) {
3652 iounmap(info->statctrl_base - info->statctrl_offset);
3653 info->statctrl_base=NULL;
3654 }
3655
3656 if (info->lcr_base){
3657 iounmap(info->lcr_base - info->lcr_offset);
3658 info->lcr_base = NULL;
3659 }
3660
3661 if ( debug_level >= DEBUG_LEVEL_INFO )
3662 printk( "%s(%d):%s release_resources() exit\n",
3663 __FILE__,__LINE__,info->device_name );
3664}
3665
3666/* Add the specified device instance data structure to the
3667 * global linked list of devices and increment the device count.
3668 */
3669static int add_device(SLMP_INFO *info)
3670{
3671 info->next_device = NULL;
3672 info->line = synclinkmp_device_count;
3673 sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
3674
3675 if (info->line < MAX_DEVICES) {
3676 if (maxframe[info->line])
3677 info->max_frame_size = maxframe[info->line];
3678 }
3679
3680 synclinkmp_device_count++;
3681
3682 if ( !synclinkmp_device_list )
3683 synclinkmp_device_list = info;
3684 else {
3685 SLMP_INFO *current_dev = synclinkmp_device_list;
3686 while( current_dev->next_device )
3687 current_dev = current_dev->next_device;
3688 current_dev->next_device = info;
3689 }
3690
3691 if ( info->max_frame_size < 4096 )
3692 info->max_frame_size = 4096;
3693 else if ( info->max_frame_size > 65535 )
3694 info->max_frame_size = 65535;
3695
3696 printk( "SyncLink MultiPort %s: "
3697 "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
3698 info->device_name,
3699 info->phys_sca_base,
3700 info->phys_memory_base,
3701 info->phys_statctrl_base,
3702 info->phys_lcr_base,
3703 info->irq_level,
3704 info->max_frame_size );
3705
3706#if SYNCLINK_GENERIC_HDLC
3707 return hdlcdev_init(info);
3708#else
3709 return 0;
3710#endif
3711}
3712
3713static const struct tty_port_operations port_ops = {
3714 .carrier_raised = carrier_raised,
3715 .dtr_rts = dtr_rts,
3716};
3717
3718/* Allocate and initialize a device instance structure
3719 *
3720 * Return Value: pointer to SLMP_INFO if success, otherwise NULL
3721 */
3722static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3723{
3724 SLMP_INFO *info;
3725
3726 info = kzalloc(sizeof(SLMP_INFO),
3727 GFP_KERNEL);
3728
3729 if (!info) {
3730 printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
3731 __FILE__,__LINE__, adapter_num, port_num);
3732 } else {
3733 tty_port_init(&info->port);
3734 info->port.ops = &port_ops;
3735 info->magic = MGSL_MAGIC;
3736 INIT_WORK(&info->task, bh_handler);
3737 info->max_frame_size = 4096;
3738 info->port.close_delay = 5*HZ/10;
3739 info->port.closing_wait = 30*HZ;
3740 init_waitqueue_head(&info->status_event_wait_q);
3741 init_waitqueue_head(&info->event_wait_q);
3742 spin_lock_init(&info->netlock);
3743 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3744 info->idle_mode = HDLC_TXIDLE_FLAGS;
3745 info->adapter_num = adapter_num;
3746 info->port_num = port_num;
3747
3748 /* Copy configuration info to device instance data */
3749 info->irq_level = pdev->irq;
3750 info->phys_lcr_base = pci_resource_start(pdev,0);
3751 info->phys_sca_base = pci_resource_start(pdev,2);
3752 info->phys_memory_base = pci_resource_start(pdev,3);
3753 info->phys_statctrl_base = pci_resource_start(pdev,4);
3754
3755 /* Because veremap only works on page boundaries we must map
3756 * a larger area than is actually implemented for the LCR
3757 * memory range. We map a full page starting at the page boundary.
3758 */
3759 info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
3760 info->phys_lcr_base &= ~(PAGE_SIZE-1);
3761
3762 info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1);
3763 info->phys_sca_base &= ~(PAGE_SIZE-1);
3764
3765 info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1);
3766 info->phys_statctrl_base &= ~(PAGE_SIZE-1);
3767
3768 info->bus_type = MGSL_BUS_TYPE_PCI;
3769 info->irq_flags = IRQF_SHARED;
3770
3771 timer_setup(&info->tx_timer, tx_timeout, 0);
3772 timer_setup(&info->status_timer, status_timeout, 0);
3773
3774 /* Store the PCI9050 misc control register value because a flaw
3775 * in the PCI9050 prevents LCR registers from being read if
3776 * BIOS assigns an LCR base address with bit 7 set.
3777 *
3778 * Only the misc control register is accessed for which only
3779 * write access is needed, so set an initial value and change
3780 * bits to the device instance data as we write the value
3781 * to the actual misc control register.
3782 */
3783 info->misc_ctrl_value = 0x087e4546;
3784
3785 /* initial port state is unknown - if startup errors
3786 * occur, init_error will be set to indicate the
3787 * problem. Once the port is fully initialized,
3788 * this value will be set to 0 to indicate the
3789 * port is available.
3790 */
3791 info->init_error = -1;
3792 }
3793
3794 return info;
3795}
3796
3797static int device_init(int adapter_num, struct pci_dev *pdev)
3798{
3799 SLMP_INFO *port_array[SCA_MAX_PORTS];
3800 int port, rc;
3801
3802 /* allocate device instances for up to SCA_MAX_PORTS devices */
3803 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3804 port_array[port] = alloc_dev(adapter_num,port,pdev);
3805 if( port_array[port] == NULL ) {
3806 for (--port; port >= 0; --port) {
3807 tty_port_destroy(&port_array[port]->port);
3808 kfree(port_array[port]);
3809 }
3810 return -ENOMEM;
3811 }
3812 }
3813
3814 /* give copy of port_array to all ports and add to device list */
3815 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3816 memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
3817 rc = add_device( port_array[port] );
3818 if (rc)
3819 goto err_add;
3820 spin_lock_init(&port_array[port]->lock);
3821 }
3822
3823 /* Allocate and claim adapter resources */
3824 if ( !claim_resources(port_array[0]) ) {
3825
3826 alloc_dma_bufs(port_array[0]);
3827
3828 /* copy resource information from first port to others */
3829 for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
3830 port_array[port]->lock = port_array[0]->lock;
3831 port_array[port]->irq_level = port_array[0]->irq_level;
3832 port_array[port]->memory_base = port_array[0]->memory_base;
3833 port_array[port]->sca_base = port_array[0]->sca_base;
3834 port_array[port]->statctrl_base = port_array[0]->statctrl_base;
3835 port_array[port]->lcr_base = port_array[0]->lcr_base;
3836 alloc_dma_bufs(port_array[port]);
3837 }
3838
3839 rc = request_irq(port_array[0]->irq_level,
3840 synclinkmp_interrupt,
3841 port_array[0]->irq_flags,
3842 port_array[0]->device_name,
3843 port_array[0]);
3844 if ( rc ) {
3845 printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n",
3846 __FILE__,__LINE__,
3847 port_array[0]->device_name,
3848 port_array[0]->irq_level );
3849 goto err_irq;
3850 }
3851 port_array[0]->irq_requested = true;
3852 adapter_test(port_array[0]);
3853 }
3854 return 0;
3855err_irq:
3856 release_resources( port_array[0] );
3857err_add:
3858 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3859 tty_port_destroy(&port_array[port]->port);
3860 kfree(port_array[port]);
3861 }
3862 return rc;
3863}
3864
3865static const struct tty_operations ops = {
3866 .install = install,
3867 .open = open,
3868 .close = close,
3869 .write = write,
3870 .put_char = put_char,
3871 .flush_chars = flush_chars,
3872 .write_room = write_room,
3873 .chars_in_buffer = chars_in_buffer,
3874 .flush_buffer = flush_buffer,
3875 .ioctl = ioctl,
3876 .throttle = throttle,
3877 .unthrottle = unthrottle,
3878 .send_xchar = send_xchar,
3879 .break_ctl = set_break,
3880 .wait_until_sent = wait_until_sent,
3881 .set_termios = set_termios,
3882 .stop = tx_hold,
3883 .start = tx_release,
3884 .hangup = hangup,
3885 .tiocmget = tiocmget,
3886 .tiocmset = tiocmset,
3887 .get_icount = get_icount,
3888 .proc_show = synclinkmp_proc_show,
3889};
3890
3891
3892static void synclinkmp_cleanup(void)
3893{
3894 int rc;
3895 SLMP_INFO *info;
3896 SLMP_INFO *tmp;
3897
3898 printk("Unloading %s %s\n", driver_name, driver_version);
3899
3900 if (serial_driver) {
3901 rc = tty_unregister_driver(serial_driver);
3902 if (rc)
3903 printk("%s(%d) failed to unregister tty driver err=%d\n",
3904 __FILE__,__LINE__,rc);
3905 put_tty_driver(serial_driver);
3906 }
3907
3908 /* reset devices */
3909 info = synclinkmp_device_list;
3910 while(info) {
3911 reset_port(info);
3912 info = info->next_device;
3913 }
3914
3915 /* release devices */
3916 info = synclinkmp_device_list;
3917 while(info) {
3918#if SYNCLINK_GENERIC_HDLC
3919 hdlcdev_exit(info);
3920#endif
3921 free_dma_bufs(info);
3922 free_tmp_rx_buf(info);
3923 if ( info->port_num == 0 ) {
3924 if (info->sca_base)
3925 write_reg(info, LPR, 1); /* set low power mode */
3926 release_resources(info);
3927 }
3928 tmp = info;
3929 info = info->next_device;
3930 tty_port_destroy(&tmp->port);
3931 kfree(tmp);
3932 }
3933
3934 pci_unregister_driver(&synclinkmp_pci_driver);
3935}
3936
3937/* Driver initialization entry point.
3938 */
3939
3940static int __init synclinkmp_init(void)
3941{
3942 int rc;
3943
3944 if (break_on_load) {
3945 synclinkmp_get_text_ptr();
3946 BREAKPOINT();
3947 }
3948
3949 printk("%s %s\n", driver_name, driver_version);
3950
3951 if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
3952 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
3953 return rc;
3954 }
3955
3956 serial_driver = alloc_tty_driver(128);
3957 if (!serial_driver) {
3958 rc = -ENOMEM;
3959 goto error;
3960 }
3961
3962 /* Initialize the tty_driver structure */
3963
3964 serial_driver->driver_name = "synclinkmp";
3965 serial_driver->name = "ttySLM";
3966 serial_driver->major = ttymajor;
3967 serial_driver->minor_start = 64;
3968 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3969 serial_driver->subtype = SERIAL_TYPE_NORMAL;
3970 serial_driver->init_termios = tty_std_termios;
3971 serial_driver->init_termios.c_cflag =
3972 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3973 serial_driver->init_termios.c_ispeed = 9600;
3974 serial_driver->init_termios.c_ospeed = 9600;
3975 serial_driver->flags = TTY_DRIVER_REAL_RAW;
3976 tty_set_operations(serial_driver, &ops);
3977 if ((rc = tty_register_driver(serial_driver)) < 0) {
3978 printk("%s(%d):Couldn't register serial driver\n",
3979 __FILE__,__LINE__);
3980 put_tty_driver(serial_driver);
3981 serial_driver = NULL;
3982 goto error;
3983 }
3984
3985 printk("%s %s, tty major#%d\n",
3986 driver_name, driver_version,
3987 serial_driver->major);
3988
3989 return 0;
3990
3991error:
3992 synclinkmp_cleanup();
3993 return rc;
3994}
3995
3996static void __exit synclinkmp_exit(void)
3997{
3998 synclinkmp_cleanup();
3999}
4000
4001module_init(synclinkmp_init);
4002module_exit(synclinkmp_exit);
4003
4004/* Set the port for internal loopback mode.
4005 * The TxCLK and RxCLK signals are generated from the BRG and
4006 * the TxD is looped back to the RxD internally.
4007 */
4008static void enable_loopback(SLMP_INFO *info, int enable)
4009{
4010 if (enable) {
4011 /* MD2 (Mode Register 2)
4012 * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback
4013 */
4014 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
4015
4016 /* degate external TxC clock source */
4017 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4018 write_control_reg(info);
4019
4020 /* RXS/TXS (Rx/Tx clock source)
4021 * 07 Reserved, must be 0
4022 * 06..04 Clock Source, 100=BRG
4023 * 03..00 Clock Divisor, 0000=1
4024 */
4025 write_reg(info, RXS, 0x40);
4026 write_reg(info, TXS, 0x40);
4027
4028 } else {
4029 /* MD2 (Mode Register 2)
4030 * 01..00 CNCT<1..0> Channel connection, 0=normal
4031 */
4032 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
4033
4034 /* RXS/TXS (Rx/Tx clock source)
4035 * 07 Reserved, must be 0
4036 * 06..04 Clock Source, 000=RxC/TxC Pin
4037 * 03..00 Clock Divisor, 0000=1
4038 */
4039 write_reg(info, RXS, 0x00);
4040 write_reg(info, TXS, 0x00);
4041 }
4042
4043 /* set LinkSpeed if available, otherwise default to 2Mbps */
4044 if (info->params.clock_speed)
4045 set_rate(info, info->params.clock_speed);
4046 else
4047 set_rate(info, 3686400);
4048}
4049
4050/* Set the baud rate register to the desired speed
4051 *
4052 * data_rate data rate of clock in bits per second
4053 * A data rate of 0 disables the AUX clock.
4054 */
4055static void set_rate( SLMP_INFO *info, u32 data_rate )
4056{
4057 u32 TMCValue;
4058 unsigned char BRValue;
4059 u32 Divisor=0;
4060
4061 /* fBRG = fCLK/(TMC * 2^BR)
4062 */
4063 if (data_rate != 0) {
4064 Divisor = 14745600/data_rate;
4065 if (!Divisor)
4066 Divisor = 1;
4067
4068 TMCValue = Divisor;
4069
4070 BRValue = 0;
4071 if (TMCValue != 1 && TMCValue != 2) {
4072 /* BRValue of 0 provides 50/50 duty cycle *only* when
4073 * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
4074 * 50/50 duty cycle.
4075 */
4076 BRValue = 1;
4077 TMCValue >>= 1;
4078 }
4079
4080 /* while TMCValue is too big for TMC register, divide
4081 * by 2 and increment BR exponent.
4082 */
4083 for(; TMCValue > 256 && BRValue < 10; BRValue++)
4084 TMCValue >>= 1;
4085
4086 write_reg(info, TXS,
4087 (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
4088 write_reg(info, RXS,
4089 (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
4090 write_reg(info, TMC, (unsigned char)TMCValue);
4091 }
4092 else {
4093 write_reg(info, TXS,0);
4094 write_reg(info, RXS,0);
4095 write_reg(info, TMC, 0);
4096 }
4097}
4098
4099/* Disable receiver
4100 */
4101static void rx_stop(SLMP_INFO *info)
4102{
4103 if (debug_level >= DEBUG_LEVEL_ISR)
4104 printk("%s(%d):%s rx_stop()\n",
4105 __FILE__,__LINE__, info->device_name );
4106
4107 write_reg(info, CMD, RXRESET);
4108
4109 info->ie0_value &= ~RXRDYE;
4110 write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */
4111
4112 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4113 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4114 write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */
4115
4116 info->rx_enabled = false;
4117 info->rx_overflow = false;
4118}
4119
4120/* enable the receiver
4121 */
4122static void rx_start(SLMP_INFO *info)
4123{
4124 int i;
4125
4126 if (debug_level >= DEBUG_LEVEL_ISR)
4127 printk("%s(%d):%s rx_start()\n",
4128 __FILE__,__LINE__, info->device_name );
4129
4130 write_reg(info, CMD, RXRESET);
4131
4132 if ( info->params.mode == MGSL_MODE_HDLC ) {
4133 /* HDLC, disabe IRQ on rxdata */
4134 info->ie0_value &= ~RXRDYE;
4135 write_reg(info, IE0, info->ie0_value);
4136
4137 /* Reset all Rx DMA buffers and program rx dma */
4138 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4139 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4140
4141 for (i = 0; i < info->rx_buf_count; i++) {
4142 info->rx_buf_list[i].status = 0xff;
4143
4144 // throttle to 4 shared memory writes at a time to prevent
4145 // hogging local bus (keep latency time for DMA requests low).
4146 if (!(i % 4))
4147 read_status_reg(info);
4148 }
4149 info->current_rx_buf = 0;
4150
4151 /* set current/1st descriptor address */
4152 write_reg16(info, RXDMA + CDA,
4153 info->rx_buf_list_ex[0].phys_entry);
4154
4155 /* set new last rx descriptor address */
4156 write_reg16(info, RXDMA + EDA,
4157 info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
4158
4159 /* set buffer length (shared by all rx dma data buffers) */
4160 write_reg16(info, RXDMA + BFL, SCABUFSIZE);
4161
4162 write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */
4163 write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */
4164 } else {
4165 /* async, enable IRQ on rxdata */
4166 info->ie0_value |= RXRDYE;
4167 write_reg(info, IE0, info->ie0_value);
4168 }
4169
4170 write_reg(info, CMD, RXENABLE);
4171
4172 info->rx_overflow = false;
4173 info->rx_enabled = true;
4174}
4175
4176/* Enable the transmitter and send a transmit frame if
4177 * one is loaded in the DMA buffers.
4178 */
4179static void tx_start(SLMP_INFO *info)
4180{
4181 if (debug_level >= DEBUG_LEVEL_ISR)
4182 printk("%s(%d):%s tx_start() tx_count=%d\n",
4183 __FILE__,__LINE__, info->device_name,info->tx_count );
4184
4185 if (!info->tx_enabled ) {
4186 write_reg(info, CMD, TXRESET);
4187 write_reg(info, CMD, TXENABLE);
4188 info->tx_enabled = true;
4189 }
4190
4191 if ( info->tx_count ) {
4192
4193 /* If auto RTS enabled and RTS is inactive, then assert */
4194 /* RTS and set a flag indicating that the driver should */
4195 /* negate RTS when the transmission completes. */
4196
4197 info->drop_rts_on_tx_done = false;
4198
4199 if (info->params.mode != MGSL_MODE_ASYNC) {
4200
4201 if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
4202 get_signals( info );
4203 if ( !(info->serial_signals & SerialSignal_RTS) ) {
4204 info->serial_signals |= SerialSignal_RTS;
4205 set_signals( info );
4206 info->drop_rts_on_tx_done = true;
4207 }
4208 }
4209
4210 write_reg16(info, TRC0,
4211 (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
4212
4213 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4214 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4215
4216 /* set TX CDA (current descriptor address) */
4217 write_reg16(info, TXDMA + CDA,
4218 info->tx_buf_list_ex[0].phys_entry);
4219
4220 /* set TX EDA (last descriptor address) */
4221 write_reg16(info, TXDMA + EDA,
4222 info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
4223
4224 /* enable underrun IRQ */
4225 info->ie1_value &= ~IDLE;
4226 info->ie1_value |= UDRN;
4227 write_reg(info, IE1, info->ie1_value);
4228 write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
4229
4230 write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */
4231 write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */
4232
4233 mod_timer(&info->tx_timer, jiffies +
4234 msecs_to_jiffies(5000));
4235 }
4236 else {
4237 tx_load_fifo(info);
4238 /* async, enable IRQ on txdata */
4239 info->ie0_value |= TXRDYE;
4240 write_reg(info, IE0, info->ie0_value);
4241 }
4242
4243 info->tx_active = true;
4244 }
4245}
4246
4247/* stop the transmitter and DMA
4248 */
4249static void tx_stop( SLMP_INFO *info )
4250{
4251 if (debug_level >= DEBUG_LEVEL_ISR)
4252 printk("%s(%d):%s tx_stop()\n",
4253 __FILE__,__LINE__, info->device_name );
4254
4255 del_timer(&info->tx_timer);
4256
4257 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4258 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4259
4260 write_reg(info, CMD, TXRESET);
4261
4262 info->ie1_value &= ~(UDRN + IDLE);
4263 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
4264 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
4265
4266 info->ie0_value &= ~TXRDYE;
4267 write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */
4268
4269 info->tx_enabled = false;
4270 info->tx_active = false;
4271}
4272
4273/* Fill the transmit FIFO until the FIFO is full or
4274 * there is no more data to load.
4275 */
4276static void tx_load_fifo(SLMP_INFO *info)
4277{
4278 u8 TwoBytes[2];
4279
4280 /* do nothing is now tx data available and no XON/XOFF pending */
4281
4282 if ( !info->tx_count && !info->x_char )
4283 return;
4284
4285 /* load the Transmit FIFO until FIFOs full or all data sent */
4286
4287 while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
4288
4289 /* there is more space in the transmit FIFO and */
4290 /* there is more data in transmit buffer */
4291
4292 if ( (info->tx_count > 1) && !info->x_char ) {
4293 /* write 16-bits */
4294 TwoBytes[0] = info->tx_buf[info->tx_get++];
4295 if (info->tx_get >= info->max_frame_size)
4296 info->tx_get -= info->max_frame_size;
4297 TwoBytes[1] = info->tx_buf[info->tx_get++];
4298 if (info->tx_get >= info->max_frame_size)
4299 info->tx_get -= info->max_frame_size;
4300
4301 write_reg16(info, TRB, *((u16 *)TwoBytes));
4302
4303 info->tx_count -= 2;
4304 info->icount.tx += 2;
4305 } else {
4306 /* only 1 byte left to transmit or 1 FIFO slot left */
4307
4308 if (info->x_char) {
4309 /* transmit pending high priority char */
4310 write_reg(info, TRB, info->x_char);
4311 info->x_char = 0;
4312 } else {
4313 write_reg(info, TRB, info->tx_buf[info->tx_get++]);
4314 if (info->tx_get >= info->max_frame_size)
4315 info->tx_get -= info->max_frame_size;
4316 info->tx_count--;
4317 }
4318 info->icount.tx++;
4319 }
4320 }
4321}
4322
4323/* Reset a port to a known state
4324 */
4325static void reset_port(SLMP_INFO *info)
4326{
4327 if (info->sca_base) {
4328
4329 tx_stop(info);
4330 rx_stop(info);
4331
4332 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
4333 set_signals(info);
4334
4335 /* disable all port interrupts */
4336 info->ie0_value = 0;
4337 info->ie1_value = 0;
4338 info->ie2_value = 0;
4339 write_reg(info, IE0, info->ie0_value);
4340 write_reg(info, IE1, info->ie1_value);
4341 write_reg(info, IE2, info->ie2_value);
4342
4343 write_reg(info, CMD, CHRESET);
4344 }
4345}
4346
4347/* Reset all the ports to a known state.
4348 */
4349static void reset_adapter(SLMP_INFO *info)
4350{
4351 int i;
4352
4353 for ( i=0; i < SCA_MAX_PORTS; ++i) {
4354 if (info->port_array[i])
4355 reset_port(info->port_array[i]);
4356 }
4357}
4358
4359/* Program port for asynchronous communications.
4360 */
4361static void async_mode(SLMP_INFO *info)
4362{
4363
4364 unsigned char RegValue;
4365
4366 tx_stop(info);
4367 rx_stop(info);
4368
4369 /* MD0, Mode Register 0
4370 *
4371 * 07..05 PRCTL<2..0>, Protocol Mode, 000=async
4372 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4373 * 03 Reserved, must be 0
4374 * 02 CRCCC, CRC Calculation, 0=disabled
4375 * 01..00 STOP<1..0> Stop bits (00=1,10=2)
4376 *
4377 * 0000 0000
4378 */
4379 RegValue = 0x00;
4380 if (info->params.stop_bits != 1)
4381 RegValue |= BIT1;
4382 write_reg(info, MD0, RegValue);
4383
4384 /* MD1, Mode Register 1
4385 *
4386 * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
4387 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
4388 * 03..02 RXCHR<1..0>, rx char size
4389 * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
4390 *
4391 * 0100 0000
4392 */
4393 RegValue = 0x40;
4394 switch (info->params.data_bits) {
4395 case 7: RegValue |= BIT4 + BIT2; break;
4396 case 6: RegValue |= BIT5 + BIT3; break;
4397 case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
4398 }
4399 if (info->params.parity != ASYNC_PARITY_NONE) {
4400 RegValue |= BIT1;
4401 if (info->params.parity == ASYNC_PARITY_ODD)
4402 RegValue |= BIT0;
4403 }
4404 write_reg(info, MD1, RegValue);
4405
4406 /* MD2, Mode Register 2
4407 *
4408 * 07..02 Reserved, must be 0
4409 * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback
4410 *
4411 * 0000 0000
4412 */
4413 RegValue = 0x00;
4414 if (info->params.loopback)
4415 RegValue |= (BIT1 + BIT0);
4416 write_reg(info, MD2, RegValue);
4417
4418 /* RXS, Receive clock source
4419 *
4420 * 07 Reserved, must be 0
4421 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4422 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4423 */
4424 RegValue=BIT6;
4425 write_reg(info, RXS, RegValue);
4426
4427 /* TXS, Transmit clock source
4428 *
4429 * 07 Reserved, must be 0
4430 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4431 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4432 */
4433 RegValue=BIT6;
4434 write_reg(info, TXS, RegValue);
4435
4436 /* Control Register
4437 *
4438 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4439 */
4440 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4441 write_control_reg(info);
4442
4443 tx_set_idle(info);
4444
4445 /* RRC Receive Ready Control 0
4446 *
4447 * 07..05 Reserved, must be 0
4448 * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
4449 */
4450 write_reg(info, RRC, 0x00);
4451
4452 /* TRC0 Transmit Ready Control 0
4453 *
4454 * 07..05 Reserved, must be 0
4455 * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
4456 */
4457 write_reg(info, TRC0, 0x10);
4458
4459 /* TRC1 Transmit Ready Control 1
4460 *
4461 * 07..05 Reserved, must be 0
4462 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
4463 */
4464 write_reg(info, TRC1, 0x1e);
4465
4466 /* CTL, MSCI control register
4467 *
4468 * 07..06 Reserved, set to 0
4469 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4470 * 04 IDLC, idle control, 0=mark 1=idle register
4471 * 03 BRK, break, 0=off 1 =on (async)
4472 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4473 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4474 * 00 RTS, RTS output control, 0=active 1=inactive
4475 *
4476 * 0001 0001
4477 */
4478 RegValue = 0x10;
4479 if (!(info->serial_signals & SerialSignal_RTS))
4480 RegValue |= 0x01;
4481 write_reg(info, CTL, RegValue);
4482
4483 /* enable status interrupts */
4484 info->ie0_value |= TXINTE + RXINTE;
4485 write_reg(info, IE0, info->ie0_value);
4486
4487 /* enable break detect interrupt */
4488 info->ie1_value = BRKD;
4489 write_reg(info, IE1, info->ie1_value);
4490
4491 /* enable rx overrun interrupt */
4492 info->ie2_value = OVRN;
4493 write_reg(info, IE2, info->ie2_value);
4494
4495 set_rate( info, info->params.data_rate * 16 );
4496}
4497
4498/* Program the SCA for HDLC communications.
4499 */
4500static void hdlc_mode(SLMP_INFO *info)
4501{
4502 unsigned char RegValue;
4503 u32 DpllDivisor;
4504
4505 // Can't use DPLL because SCA outputs recovered clock on RxC when
4506 // DPLL mode selected. This causes output contention with RxC receiver.
4507 // Use of DPLL would require external hardware to disable RxC receiver
4508 // when DPLL mode selected.
4509 info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
4510
4511 /* disable DMA interrupts */
4512 write_reg(info, TXDMA + DIR, 0);
4513 write_reg(info, RXDMA + DIR, 0);
4514
4515 /* MD0, Mode Register 0
4516 *
4517 * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC
4518 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4519 * 03 Reserved, must be 0
4520 * 02 CRCCC, CRC Calculation, 1=enabled
4521 * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
4522 * 00 CRC0, CRC initial value, 1 = all 1s
4523 *
4524 * 1000 0001
4525 */
4526 RegValue = 0x81;
4527 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4528 RegValue |= BIT4;
4529 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4530 RegValue |= BIT4;
4531 if (info->params.crc_type == HDLC_CRC_16_CCITT)
4532 RegValue |= BIT2 + BIT1;
4533 write_reg(info, MD0, RegValue);
4534
4535 /* MD1, Mode Register 1
4536 *
4537 * 07..06 ADDRS<1..0>, Address detect, 00=no addr check
4538 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits
4539 * 03..02 RXCHR<1..0>, rx char size, 00=8 bits
4540 * 01..00 PMPM<1..0>, Parity mode, 00=no parity
4541 *
4542 * 0000 0000
4543 */
4544 RegValue = 0x00;
4545 write_reg(info, MD1, RegValue);
4546
4547 /* MD2, Mode Register 2
4548 *
4549 * 07 NRZFM, 0=NRZ, 1=FM
4550 * 06..05 CODE<1..0> Encoding, 00=NRZ
4551 * 04..03 DRATE<1..0> DPLL Divisor, 00=8
4552 * 02 Reserved, must be 0
4553 * 01..00 CNCT<1..0> Channel connection, 0=normal
4554 *
4555 * 0000 0000
4556 */
4557 RegValue = 0x00;
4558 switch(info->params.encoding) {
4559 case HDLC_ENCODING_NRZI: RegValue |= BIT5; break;
4560 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */
4561 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
4562 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */
4563#if 0
4564 case HDLC_ENCODING_NRZB: /* not supported */
4565 case HDLC_ENCODING_NRZI_MARK: /* not supported */
4566 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */
4567#endif
4568 }
4569 if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4570 DpllDivisor = 16;
4571 RegValue |= BIT3;
4572 } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4573 DpllDivisor = 8;
4574 } else {
4575 DpllDivisor = 32;
4576 RegValue |= BIT4;
4577 }
4578 write_reg(info, MD2, RegValue);
4579
4580
4581 /* RXS, Receive clock source
4582 *
4583 * 07 Reserved, must be 0
4584 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4585 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4586 */
4587 RegValue=0;
4588 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4589 RegValue |= BIT6;
4590 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4591 RegValue |= BIT6 + BIT5;
4592 write_reg(info, RXS, RegValue);
4593
4594 /* TXS, Transmit clock source
4595 *
4596 * 07 Reserved, must be 0
4597 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4598 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4599 */
4600 RegValue=0;
4601 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4602 RegValue |= BIT6;
4603 if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4604 RegValue |= BIT6 + BIT5;
4605 write_reg(info, TXS, RegValue);
4606
4607 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4608 set_rate(info, info->params.clock_speed * DpllDivisor);
4609 else
4610 set_rate(info, info->params.clock_speed);
4611
4612 /* GPDATA (General Purpose I/O Data Register)
4613 *
4614 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4615 */
4616 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4617 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4618 else
4619 info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
4620 write_control_reg(info);
4621
4622 /* RRC Receive Ready Control 0
4623 *
4624 * 07..05 Reserved, must be 0
4625 * 04..00 RRC<4..0> Rx FIFO trigger active
4626 */
4627 write_reg(info, RRC, rx_active_fifo_level);
4628
4629 /* TRC0 Transmit Ready Control 0
4630 *
4631 * 07..05 Reserved, must be 0
4632 * 04..00 TRC<4..0> Tx FIFO trigger active
4633 */
4634 write_reg(info, TRC0, tx_active_fifo_level);
4635
4636 /* TRC1 Transmit Ready Control 1
4637 *
4638 * 07..05 Reserved, must be 0
4639 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
4640 */
4641 write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
4642
4643 /* DMR, DMA Mode Register
4644 *
4645 * 07..05 Reserved, must be 0
4646 * 04 TMOD, Transfer Mode: 1=chained-block
4647 * 03 Reserved, must be 0
4648 * 02 NF, Number of Frames: 1=multi-frame
4649 * 01 CNTE, Frame End IRQ Counter enable: 0=disabled
4650 * 00 Reserved, must be 0
4651 *
4652 * 0001 0100
4653 */
4654 write_reg(info, TXDMA + DMR, 0x14);
4655 write_reg(info, RXDMA + DMR, 0x14);
4656
4657 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4658 write_reg(info, RXDMA + CPB,
4659 (unsigned char)(info->buffer_list_phys >> 16));
4660
4661 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4662 write_reg(info, TXDMA + CPB,
4663 (unsigned char)(info->buffer_list_phys >> 16));
4664
4665 /* enable status interrupts. other code enables/disables
4666 * the individual sources for these two interrupt classes.
4667 */
4668 info->ie0_value |= TXINTE + RXINTE;
4669 write_reg(info, IE0, info->ie0_value);
4670
4671 /* CTL, MSCI control register
4672 *
4673 * 07..06 Reserved, set to 0
4674 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4675 * 04 IDLC, idle control, 0=mark 1=idle register
4676 * 03 BRK, break, 0=off 1 =on (async)
4677 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4678 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4679 * 00 RTS, RTS output control, 0=active 1=inactive
4680 *
4681 * 0001 0001
4682 */
4683 RegValue = 0x10;
4684 if (!(info->serial_signals & SerialSignal_RTS))
4685 RegValue |= 0x01;
4686 write_reg(info, CTL, RegValue);
4687
4688 /* preamble not supported ! */
4689
4690 tx_set_idle(info);
4691 tx_stop(info);
4692 rx_stop(info);
4693
4694 set_rate(info, info->params.clock_speed);
4695
4696 if (info->params.loopback)
4697 enable_loopback(info,1);
4698}
4699
4700/* Set the transmit HDLC idle mode
4701 */
4702static void tx_set_idle(SLMP_INFO *info)
4703{
4704 unsigned char RegValue = 0xff;
4705
4706 /* Map API idle mode to SCA register bits */
4707 switch(info->idle_mode) {
4708 case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break;
4709 case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break;
4710 case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break;
4711 case HDLC_TXIDLE_ONES: RegValue = 0xff; break;
4712 case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break;
4713 case HDLC_TXIDLE_SPACE: RegValue = 0x00; break;
4714 case HDLC_TXIDLE_MARK: RegValue = 0xff; break;
4715 }
4716
4717 write_reg(info, IDL, RegValue);
4718}
4719
4720/* Query the adapter for the state of the V24 status (input) signals.
4721 */
4722static void get_signals(SLMP_INFO *info)
4723{
4724 u16 status = read_reg(info, SR3);
4725 u16 gpstatus = read_status_reg(info);
4726 u16 testbit;
4727
4728 /* clear all serial signals except RTS and DTR */
4729 info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
4730
4731 /* set serial signal bits to reflect MISR */
4732
4733 if (!(status & BIT3))
4734 info->serial_signals |= SerialSignal_CTS;
4735
4736 if ( !(status & BIT2))
4737 info->serial_signals |= SerialSignal_DCD;
4738
4739 testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
4740 if (!(gpstatus & testbit))
4741 info->serial_signals |= SerialSignal_RI;
4742
4743 testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
4744 if (!(gpstatus & testbit))
4745 info->serial_signals |= SerialSignal_DSR;
4746}
4747
4748/* Set the state of RTS and DTR based on contents of
4749 * serial_signals member of device context.
4750 */
4751static void set_signals(SLMP_INFO *info)
4752{
4753 unsigned char RegValue;
4754 u16 EnableBit;
4755
4756 RegValue = read_reg(info, CTL);
4757 if (info->serial_signals & SerialSignal_RTS)
4758 RegValue &= ~BIT0;
4759 else
4760 RegValue |= BIT0;
4761 write_reg(info, CTL, RegValue);
4762
4763 // Port 0..3 DTR is ctrl reg <1,3,5,7>
4764 EnableBit = BIT1 << (info->port_num*2);
4765 if (info->serial_signals & SerialSignal_DTR)
4766 info->port_array[0]->ctrlreg_value &= ~EnableBit;
4767 else
4768 info->port_array[0]->ctrlreg_value |= EnableBit;
4769 write_control_reg(info);
4770}
4771
4772/*******************/
4773/* DMA Buffer Code */
4774/*******************/
4775
4776/* Set the count for all receive buffers to SCABUFSIZE
4777 * and set the current buffer to the first buffer. This effectively
4778 * makes all buffers free and discards any data in buffers.
4779 */
4780static void rx_reset_buffers(SLMP_INFO *info)
4781{
4782 rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
4783}
4784
4785/* Free the buffers used by a received frame
4786 *
4787 * info pointer to device instance data
4788 * first index of 1st receive buffer of frame
4789 * last index of last receive buffer of frame
4790 */
4791static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
4792{
4793 bool done = false;
4794
4795 while(!done) {
4796 /* reset current buffer for reuse */
4797 info->rx_buf_list[first].status = 0xff;
4798
4799 if (first == last) {
4800 done = true;
4801 /* set new last rx descriptor address */
4802 write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
4803 }
4804
4805 first++;
4806 if (first == info->rx_buf_count)
4807 first = 0;
4808 }
4809
4810 /* set current buffer to next buffer after last buffer of frame */
4811 info->current_rx_buf = first;
4812}
4813
4814/* Return a received frame from the receive DMA buffers.
4815 * Only frames received without errors are returned.
4816 *
4817 * Return Value: true if frame returned, otherwise false
4818 */
4819static bool rx_get_frame(SLMP_INFO *info)
4820{
4821 unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
4822 unsigned short status;
4823 unsigned int framesize = 0;
4824 bool ReturnCode = false;
4825 unsigned long flags;
4826 struct tty_struct *tty = info->port.tty;
4827 unsigned char addr_field = 0xff;
4828 SCADESC *desc;
4829 SCADESC_EX *desc_ex;
4830
4831CheckAgain:
4832 /* assume no frame returned, set zero length */
4833 framesize = 0;
4834 addr_field = 0xff;
4835
4836 /*
4837 * current_rx_buf points to the 1st buffer of the next available
4838 * receive frame. To find the last buffer of the frame look for
4839 * a non-zero status field in the buffer entries. (The status
4840 * field is set by the 16C32 after completing a receive frame.
4841 */
4842 StartIndex = EndIndex = info->current_rx_buf;
4843
4844 for ( ;; ) {
4845 desc = &info->rx_buf_list[EndIndex];
4846 desc_ex = &info->rx_buf_list_ex[EndIndex];
4847
4848 if (desc->status == 0xff)
4849 goto Cleanup; /* current desc still in use, no frames available */
4850
4851 if (framesize == 0 && info->params.addr_filter != 0xff)
4852 addr_field = desc_ex->virt_addr[0];
4853
4854 framesize += desc->length;
4855
4856 /* Status != 0 means last buffer of frame */
4857 if (desc->status)
4858 break;
4859
4860 EndIndex++;
4861 if (EndIndex == info->rx_buf_count)
4862 EndIndex = 0;
4863
4864 if (EndIndex == info->current_rx_buf) {
4865 /* all buffers have been 'used' but none mark */
4866 /* the end of a frame. Reset buffers and receiver. */
4867 if ( info->rx_enabled ){
4868 spin_lock_irqsave(&info->lock,flags);
4869 rx_start(info);
4870 spin_unlock_irqrestore(&info->lock,flags);
4871 }
4872 goto Cleanup;
4873 }
4874
4875 }
4876
4877 /* check status of receive frame */
4878
4879 /* frame status is byte stored after frame data
4880 *
4881 * 7 EOM (end of msg), 1 = last buffer of frame
4882 * 6 Short Frame, 1 = short frame
4883 * 5 Abort, 1 = frame aborted
4884 * 4 Residue, 1 = last byte is partial
4885 * 3 Overrun, 1 = overrun occurred during frame reception
4886 * 2 CRC, 1 = CRC error detected
4887 *
4888 */
4889 status = desc->status;
4890
4891 /* ignore CRC bit if not using CRC (bit is undefined) */
4892 /* Note:CRC is not save to data buffer */
4893 if (info->params.crc_type == HDLC_CRC_NONE)
4894 status &= ~BIT2;
4895
4896 if (framesize == 0 ||
4897 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4898 /* discard 0 byte frames, this seems to occur sometime
4899 * when remote is idling flags.
4900 */
4901 rx_free_frame_buffers(info, StartIndex, EndIndex);
4902 goto CheckAgain;
4903 }
4904
4905 if (framesize < 2)
4906 status |= BIT6;
4907
4908 if (status & (BIT6+BIT5+BIT3+BIT2)) {
4909 /* received frame has errors,
4910 * update counts and mark frame size as 0
4911 */
4912 if (status & BIT6)
4913 info->icount.rxshort++;
4914 else if (status & BIT5)
4915 info->icount.rxabort++;
4916 else if (status & BIT3)
4917 info->icount.rxover++;
4918 else
4919 info->icount.rxcrc++;
4920
4921 framesize = 0;
4922#if SYNCLINK_GENERIC_HDLC
4923 {
4924 info->netdev->stats.rx_errors++;
4925 info->netdev->stats.rx_frame_errors++;
4926 }
4927#endif
4928 }
4929
4930 if ( debug_level >= DEBUG_LEVEL_BH )
4931 printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
4932 __FILE__,__LINE__,info->device_name,status,framesize);
4933
4934 if ( debug_level >= DEBUG_LEVEL_DATA )
4935 trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
4936 min_t(unsigned int, framesize, SCABUFSIZE), 0);
4937
4938 if (framesize) {
4939 if (framesize > info->max_frame_size)
4940 info->icount.rxlong++;
4941 else {
4942 /* copy dma buffer(s) to contiguous intermediate buffer */
4943 int copy_count = framesize;
4944 int index = StartIndex;
4945 unsigned char *ptmp = info->tmp_rx_buf;
4946 info->tmp_rx_buf_count = framesize;
4947
4948 info->icount.rxok++;
4949
4950 while(copy_count) {
4951 int partial_count = min(copy_count,SCABUFSIZE);
4952 memcpy( ptmp,
4953 info->rx_buf_list_ex[index].virt_addr,
4954 partial_count );
4955 ptmp += partial_count;
4956 copy_count -= partial_count;
4957
4958 if ( ++index == info->rx_buf_count )
4959 index = 0;
4960 }
4961
4962#if SYNCLINK_GENERIC_HDLC
4963 if (info->netcount)
4964 hdlcdev_rx(info,info->tmp_rx_buf,framesize);
4965 else
4966#endif
4967 ldisc_receive_buf(tty,info->tmp_rx_buf,
4968 info->flag_buf, framesize);
4969 }
4970 }
4971 /* Free the buffers used by this frame. */
4972 rx_free_frame_buffers( info, StartIndex, EndIndex );
4973
4974 ReturnCode = true;
4975
4976Cleanup:
4977 if ( info->rx_enabled && info->rx_overflow ) {
4978 /* Receiver is enabled, but needs to restarted due to
4979 * rx buffer overflow. If buffers are empty, restart receiver.
4980 */
4981 if (info->rx_buf_list[EndIndex].status == 0xff) {
4982 spin_lock_irqsave(&info->lock,flags);
4983 rx_start(info);
4984 spin_unlock_irqrestore(&info->lock,flags);
4985 }
4986 }
4987
4988 return ReturnCode;
4989}
4990
4991/* load the transmit DMA buffer with data
4992 */
4993static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
4994{
4995 unsigned short copy_count;
4996 unsigned int i = 0;
4997 SCADESC *desc;
4998 SCADESC_EX *desc_ex;
4999
5000 if ( debug_level >= DEBUG_LEVEL_DATA )
5001 trace_block(info, buf, min_t(unsigned int, count, SCABUFSIZE), 1);
5002
5003 /* Copy source buffer to one or more DMA buffers, starting with
5004 * the first transmit dma buffer.
5005 */
5006 for(i=0;;)
5007 {
5008 copy_count = min_t(unsigned int, count, SCABUFSIZE);
5009
5010 desc = &info->tx_buf_list[i];
5011 desc_ex = &info->tx_buf_list_ex[i];
5012
5013 load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
5014
5015 desc->length = copy_count;
5016 desc->status = 0;
5017
5018 buf += copy_count;
5019 count -= copy_count;
5020
5021 if (!count)
5022 break;
5023
5024 i++;
5025 if (i >= info->tx_buf_count)
5026 i = 0;
5027 }
5028
5029 info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */
5030 info->last_tx_buf = ++i;
5031}
5032
5033static bool register_test(SLMP_INFO *info)
5034{
5035 static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
5036 static unsigned int count = ARRAY_SIZE(testval);
5037 unsigned int i;
5038 bool rc = true;
5039 unsigned long flags;
5040
5041 spin_lock_irqsave(&info->lock,flags);
5042 reset_port(info);
5043
5044 /* assume failure */
5045 info->init_error = DiagStatus_AddressFailure;
5046
5047 /* Write bit patterns to various registers but do it out of */
5048 /* sync, then read back and verify values. */
5049
5050 for (i = 0 ; i < count ; i++) {
5051 write_reg(info, TMC, testval[i]);
5052 write_reg(info, IDL, testval[(i+1)%count]);
5053 write_reg(info, SA0, testval[(i+2)%count]);
5054 write_reg(info, SA1, testval[(i+3)%count]);
5055
5056 if ( (read_reg(info, TMC) != testval[i]) ||
5057 (read_reg(info, IDL) != testval[(i+1)%count]) ||
5058 (read_reg(info, SA0) != testval[(i+2)%count]) ||
5059 (read_reg(info, SA1) != testval[(i+3)%count]) )
5060 {
5061 rc = false;
5062 break;
5063 }
5064 }
5065
5066 reset_port(info);
5067 spin_unlock_irqrestore(&info->lock,flags);
5068
5069 return rc;
5070}
5071
5072static bool irq_test(SLMP_INFO *info)
5073{
5074 unsigned long timeout;
5075 unsigned long flags;
5076
5077 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
5078
5079 spin_lock_irqsave(&info->lock,flags);
5080 reset_port(info);
5081
5082 /* assume failure */
5083 info->init_error = DiagStatus_IrqFailure;
5084 info->irq_occurred = false;
5085
5086 /* setup timer0 on SCA0 to interrupt */
5087
5088 /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
5089 write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
5090
5091 write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */
5092 write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */
5093
5094
5095 /* TMCS, Timer Control/Status Register
5096 *
5097 * 07 CMF, Compare match flag (read only) 1=match
5098 * 06 ECMI, CMF Interrupt Enable: 1=enabled
5099 * 05 Reserved, must be 0
5100 * 04 TME, Timer Enable
5101 * 03..00 Reserved, must be 0
5102 *
5103 * 0101 0000
5104 */
5105 write_reg(info, (unsigned char)(timer + TMCS), 0x50);
5106
5107 spin_unlock_irqrestore(&info->lock,flags);
5108
5109 timeout=100;
5110 while( timeout-- && !info->irq_occurred ) {
5111 msleep_interruptible(10);
5112 }
5113
5114 spin_lock_irqsave(&info->lock,flags);
5115 reset_port(info);
5116 spin_unlock_irqrestore(&info->lock,flags);
5117
5118 return info->irq_occurred;
5119}
5120
5121/* initialize individual SCA device (2 ports)
5122 */
5123static bool sca_init(SLMP_INFO *info)
5124{
5125 /* set wait controller to single mem partition (low), no wait states */
5126 write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */
5127 write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */
5128 write_reg(info, WCRL, 0); /* wait controller low range */
5129 write_reg(info, WCRM, 0); /* wait controller mid range */
5130 write_reg(info, WCRH, 0); /* wait controller high range */
5131
5132 /* DPCR, DMA Priority Control
5133 *
5134 * 07..05 Not used, must be 0
5135 * 04 BRC, bus release condition: 0=all transfers complete
5136 * 03 CCC, channel change condition: 0=every cycle
5137 * 02..00 PR<2..0>, priority 100=round robin
5138 *
5139 * 00000100 = 0x04
5140 */
5141 write_reg(info, DPCR, dma_priority);
5142
5143 /* DMA Master Enable, BIT7: 1=enable all channels */
5144 write_reg(info, DMER, 0x80);
5145
5146 /* enable all interrupt classes */
5147 write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
5148 write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */
5149 write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */
5150
5151 /* ITCR, interrupt control register
5152 * 07 IPC, interrupt priority, 0=MSCI->DMA
5153 * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
5154 * 04 VOS, Vector Output, 0=unmodified vector
5155 * 03..00 Reserved, must be 0
5156 */
5157 write_reg(info, ITCR, 0);
5158
5159 return true;
5160}
5161
5162/* initialize adapter hardware
5163 */
5164static bool init_adapter(SLMP_INFO *info)
5165{
5166 int i;
5167
5168 /* Set BIT30 of Local Control Reg 0x50 to reset SCA */
5169 volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5170 u32 readval;
5171
5172 info->misc_ctrl_value |= BIT30;
5173 *MiscCtrl = info->misc_ctrl_value;
5174
5175 /*
5176 * Force at least 170ns delay before clearing
5177 * reset bit. Each read from LCR takes at least
5178 * 30ns so 10 times for 300ns to be safe.
5179 */
5180 for(i=0;i<10;i++)
5181 readval = *MiscCtrl;
5182
5183 info->misc_ctrl_value &= ~BIT30;
5184 *MiscCtrl = info->misc_ctrl_value;
5185
5186 /* init control reg (all DTRs off, all clksel=input) */
5187 info->ctrlreg_value = 0xaa;
5188 write_control_reg(info);
5189
5190 {
5191 volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
5192 lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
5193
5194 switch(read_ahead_count)
5195 {
5196 case 16:
5197 lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
5198 break;
5199 case 8:
5200 lcr1_brdr_value |= BIT5 + BIT4;
5201 break;
5202 case 4:
5203 lcr1_brdr_value |= BIT5 + BIT3;
5204 break;
5205 case 0:
5206 lcr1_brdr_value |= BIT5;
5207 break;
5208 }
5209
5210 *LCR1BRDR = lcr1_brdr_value;
5211 *MiscCtrl = misc_ctrl_value;
5212 }
5213
5214 sca_init(info->port_array[0]);
5215 sca_init(info->port_array[2]);
5216
5217 return true;
5218}
5219
5220/* Loopback an HDLC frame to test the hardware
5221 * interrupt and DMA functions.
5222 */
5223static bool loopback_test(SLMP_INFO *info)
5224{
5225#define TESTFRAMESIZE 20
5226
5227 unsigned long timeout;
5228 u16 count = TESTFRAMESIZE;
5229 unsigned char buf[TESTFRAMESIZE];
5230 bool rc = false;
5231 unsigned long flags;
5232
5233 struct tty_struct *oldtty = info->port.tty;
5234 u32 speed = info->params.clock_speed;
5235
5236 info->params.clock_speed = 3686400;
5237 info->port.tty = NULL;
5238
5239 /* assume failure */
5240 info->init_error = DiagStatus_DmaFailure;
5241
5242 /* build and send transmit frame */
5243 for (count = 0; count < TESTFRAMESIZE;++count)
5244 buf[count] = (unsigned char)count;
5245
5246 memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
5247
5248 /* program hardware for HDLC and enabled receiver */
5249 spin_lock_irqsave(&info->lock,flags);
5250 hdlc_mode(info);
5251 enable_loopback(info,1);
5252 rx_start(info);
5253 info->tx_count = count;
5254 tx_load_dma_buffer(info,buf,count);
5255 tx_start(info);
5256 spin_unlock_irqrestore(&info->lock,flags);
5257
5258 /* wait for receive complete */
5259 /* Set a timeout for waiting for interrupt. */
5260 for ( timeout = 100; timeout; --timeout ) {
5261 msleep_interruptible(10);
5262
5263 if (rx_get_frame(info)) {
5264 rc = true;
5265 break;
5266 }
5267 }
5268
5269 /* verify received frame length and contents */
5270 if (rc &&
5271 ( info->tmp_rx_buf_count != count ||
5272 memcmp(buf, info->tmp_rx_buf,count))) {
5273 rc = false;
5274 }
5275
5276 spin_lock_irqsave(&info->lock,flags);
5277 reset_adapter(info);
5278 spin_unlock_irqrestore(&info->lock,flags);
5279
5280 info->params.clock_speed = speed;
5281 info->port.tty = oldtty;
5282
5283 return rc;
5284}
5285
5286/* Perform diagnostics on hardware
5287 */
5288static int adapter_test( SLMP_INFO *info )
5289{
5290 unsigned long flags;
5291 if ( debug_level >= DEBUG_LEVEL_INFO )
5292 printk( "%s(%d):Testing device %s\n",
5293 __FILE__,__LINE__,info->device_name );
5294
5295 spin_lock_irqsave(&info->lock,flags);
5296 init_adapter(info);
5297 spin_unlock_irqrestore(&info->lock,flags);
5298
5299 info->port_array[0]->port_count = 0;
5300
5301 if ( register_test(info->port_array[0]) &&
5302 register_test(info->port_array[1])) {
5303
5304 info->port_array[0]->port_count = 2;
5305
5306 if ( register_test(info->port_array[2]) &&
5307 register_test(info->port_array[3]) )
5308 info->port_array[0]->port_count += 2;
5309 }
5310 else {
5311 printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
5312 __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
5313 return -ENODEV;
5314 }
5315
5316 if ( !irq_test(info->port_array[0]) ||
5317 !irq_test(info->port_array[1]) ||
5318 (info->port_count == 4 && !irq_test(info->port_array[2])) ||
5319 (info->port_count == 4 && !irq_test(info->port_array[3]))) {
5320 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
5321 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
5322 return -ENODEV;
5323 }
5324
5325 if (!loopback_test(info->port_array[0]) ||
5326 !loopback_test(info->port_array[1]) ||
5327 (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
5328 (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
5329 printk( "%s(%d):DMA test failure for device %s\n",
5330 __FILE__,__LINE__,info->device_name);
5331 return -ENODEV;
5332 }
5333
5334 if ( debug_level >= DEBUG_LEVEL_INFO )
5335 printk( "%s(%d):device %s passed diagnostics\n",
5336 __FILE__,__LINE__,info->device_name );
5337
5338 info->port_array[0]->init_error = 0;
5339 info->port_array[1]->init_error = 0;
5340 if ( info->port_count > 2 ) {
5341 info->port_array[2]->init_error = 0;
5342 info->port_array[3]->init_error = 0;
5343 }
5344
5345 return 0;
5346}
5347
5348/* Test the shared memory on a PCI adapter.
5349 */
5350static bool memory_test(SLMP_INFO *info)
5351{
5352 static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
5353 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
5354 unsigned long count = ARRAY_SIZE(testval);
5355 unsigned long i;
5356 unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
5357 unsigned long * addr = (unsigned long *)info->memory_base;
5358
5359 /* Test data lines with test pattern at one location. */
5360
5361 for ( i = 0 ; i < count ; i++ ) {
5362 *addr = testval[i];
5363 if ( *addr != testval[i] )
5364 return false;
5365 }
5366
5367 /* Test address lines with incrementing pattern over */
5368 /* entire address range. */
5369
5370 for ( i = 0 ; i < limit ; i++ ) {
5371 *addr = i * 4;
5372 addr++;
5373 }
5374
5375 addr = (unsigned long *)info->memory_base;
5376
5377 for ( i = 0 ; i < limit ; i++ ) {
5378 if ( *addr != i * 4 )
5379 return false;
5380 addr++;
5381 }
5382
5383 memset( info->memory_base, 0, SCA_MEM_SIZE );
5384 return true;
5385}
5386
5387/* Load data into PCI adapter shared memory.
5388 *
5389 * The PCI9050 releases control of the local bus
5390 * after completing the current read or write operation.
5391 *
5392 * While the PCI9050 write FIFO not empty, the
5393 * PCI9050 treats all of the writes as a single transaction
5394 * and does not release the bus. This causes DMA latency problems
5395 * at high speeds when copying large data blocks to the shared memory.
5396 *
5397 * This function breaks a write into multiple transations by
5398 * interleaving a read which flushes the write FIFO and 'completes'
5399 * the write transation. This allows any pending DMA request to gain control
5400 * of the local bus in a timely fasion.
5401 */
5402static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
5403{
5404 /* A load interval of 16 allows for 4 32-bit writes at */
5405 /* 136ns each for a maximum latency of 542ns on the local bus.*/
5406
5407 unsigned short interval = count / sca_pci_load_interval;
5408 unsigned short i;
5409
5410 for ( i = 0 ; i < interval ; i++ )
5411 {
5412 memcpy(dest, src, sca_pci_load_interval);
5413 read_status_reg(info);
5414 dest += sca_pci_load_interval;
5415 src += sca_pci_load_interval;
5416 }
5417
5418 memcpy(dest, src, count % sca_pci_load_interval);
5419}
5420
5421static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
5422{
5423 int i;
5424 int linecount;
5425 if (xmit)
5426 printk("%s tx data:\n",info->device_name);
5427 else
5428 printk("%s rx data:\n",info->device_name);
5429
5430 while(count) {
5431 if (count > 16)
5432 linecount = 16;
5433 else
5434 linecount = count;
5435
5436 for(i=0;i<linecount;i++)
5437 printk("%02X ",(unsigned char)data[i]);
5438 for(;i<17;i++)
5439 printk(" ");
5440 for(i=0;i<linecount;i++) {
5441 if (data[i]>=040 && data[i]<=0176)
5442 printk("%c",data[i]);
5443 else
5444 printk(".");
5445 }
5446 printk("\n");
5447
5448 data += linecount;
5449 count -= linecount;
5450 }
5451} /* end of trace_block() */
5452
5453/* called when HDLC frame times out
5454 * update stats and do tx completion processing
5455 */
5456static void tx_timeout(struct timer_list *t)
5457{
5458 SLMP_INFO *info = from_timer(info, t, tx_timer);
5459 unsigned long flags;
5460
5461 if ( debug_level >= DEBUG_LEVEL_INFO )
5462 printk( "%s(%d):%s tx_timeout()\n",
5463 __FILE__,__LINE__,info->device_name);
5464 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5465 info->icount.txtimeout++;
5466 }
5467 spin_lock_irqsave(&info->lock,flags);
5468 info->tx_active = false;
5469 info->tx_count = info->tx_put = info->tx_get = 0;
5470
5471 spin_unlock_irqrestore(&info->lock,flags);
5472
5473#if SYNCLINK_GENERIC_HDLC
5474 if (info->netcount)
5475 hdlcdev_tx_done(info);
5476 else
5477#endif
5478 bh_transmit(info);
5479}
5480
5481/* called to periodically check the DSR/RI modem signal input status
5482 */
5483static void status_timeout(struct timer_list *t)
5484{
5485 u16 status = 0;
5486 SLMP_INFO *info = from_timer(info, t, status_timer);
5487 unsigned long flags;
5488 unsigned char delta;
5489
5490
5491 spin_lock_irqsave(&info->lock,flags);
5492 get_signals(info);
5493 spin_unlock_irqrestore(&info->lock,flags);
5494
5495 /* check for DSR/RI state change */
5496
5497 delta = info->old_signals ^ info->serial_signals;
5498 info->old_signals = info->serial_signals;
5499
5500 if (delta & SerialSignal_DSR)
5501 status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
5502
5503 if (delta & SerialSignal_RI)
5504 status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
5505
5506 if (delta & SerialSignal_DCD)
5507 status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
5508
5509 if (delta & SerialSignal_CTS)
5510 status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
5511
5512 if (status)
5513 isr_io_pin(info,status);
5514
5515 mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
5516}
5517
5518
5519/* Register Access Routines -
5520 * All registers are memory mapped
5521 */
5522#define CALC_REGADDR() \
5523 unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
5524 if (info->port_num > 1) \
5525 RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \
5526 if ( info->port_num & 1) { \
5527 if (Addr > 0x7f) \
5528 RegAddr += 0x40; /* DMA access */ \
5529 else if (Addr > 0x1f && Addr < 0x60) \
5530 RegAddr += 0x20; /* MSCI access */ \
5531 }
5532
5533
5534static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
5535{
5536 CALC_REGADDR();
5537 return *RegAddr;
5538}
5539static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
5540{
5541 CALC_REGADDR();
5542 *RegAddr = Value;
5543}
5544
5545static u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
5546{
5547 CALC_REGADDR();
5548 return *((u16 *)RegAddr);
5549}
5550
5551static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
5552{
5553 CALC_REGADDR();
5554 *((u16 *)RegAddr) = Value;
5555}
5556
5557static unsigned char read_status_reg(SLMP_INFO * info)
5558{
5559 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5560 return *RegAddr;
5561}
5562
5563static void write_control_reg(SLMP_INFO * info)
5564{
5565 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5566 *RegAddr = info->port_array[0]->ctrlreg_value;
5567}
5568
5569
5570static int synclinkmp_init_one (struct pci_dev *dev,
5571 const struct pci_device_id *ent)
5572{
5573 if (pci_enable_device(dev)) {
5574 printk("error enabling pci device %p\n", dev);
5575 return -EIO;
5576 }
5577 return device_init( ++synclinkmp_adapter_count, dev );
5578}
5579
5580static void synclinkmp_remove_one (struct pci_dev *dev)
5581{
5582}
1// SPDX-License-Identifier: GPL-1.0+
2/*
3 * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
4 *
5 * Device driver for Microgate SyncLink Multiport
6 * high speed multiprotocol serial adapter.
7 *
8 * written by Paul Fulghum for Microgate Corporation
9 * paulkf@microgate.com
10 *
11 * Microgate and SyncLink are trademarks of Microgate Corporation
12 *
13 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
14 *
15 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
16 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
18 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
19 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
20 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
21 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
23 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
24 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
25 * OF THE POSSIBILITY OF SUCH DAMAGE.
26 */
27
28#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
29#if defined(__i386__)
30# define BREAKPOINT() asm(" int $3");
31#else
32# define BREAKPOINT() { }
33#endif
34
35#define MAX_DEVICES 12
36
37#include <linux/module.h>
38#include <linux/errno.h>
39#include <linux/signal.h>
40#include <linux/sched.h>
41#include <linux/timer.h>
42#include <linux/interrupt.h>
43#include <linux/pci.h>
44#include <linux/tty.h>
45#include <linux/tty_flip.h>
46#include <linux/serial.h>
47#include <linux/major.h>
48#include <linux/string.h>
49#include <linux/fcntl.h>
50#include <linux/ptrace.h>
51#include <linux/ioport.h>
52#include <linux/mm.h>
53#include <linux/seq_file.h>
54#include <linux/slab.h>
55#include <linux/netdevice.h>
56#include <linux/vmalloc.h>
57#include <linux/init.h>
58#include <linux/delay.h>
59#include <linux/ioctl.h>
60
61#include <asm/io.h>
62#include <asm/irq.h>
63#include <asm/dma.h>
64#include <linux/bitops.h>
65#include <asm/types.h>
66#include <linux/termios.h>
67#include <linux/workqueue.h>
68#include <linux/hdlc.h>
69#include <linux/synclink.h>
70
71#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
72#define SYNCLINK_GENERIC_HDLC 1
73#else
74#define SYNCLINK_GENERIC_HDLC 0
75#endif
76
77#define GET_USER(error,value,addr) error = get_user(value,addr)
78#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
79#define PUT_USER(error,value,addr) error = put_user(value,addr)
80#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
81
82#include <linux/uaccess.h>
83
84static MGSL_PARAMS default_params = {
85 MGSL_MODE_HDLC, /* unsigned long mode */
86 0, /* unsigned char loopback; */
87 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
88 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
89 0, /* unsigned long clock_speed; */
90 0xff, /* unsigned char addr_filter; */
91 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
92 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
93 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
94 9600, /* unsigned long data_rate; */
95 8, /* unsigned char data_bits; */
96 1, /* unsigned char stop_bits; */
97 ASYNC_PARITY_NONE /* unsigned char parity; */
98};
99
100/* size in bytes of DMA data buffers */
101#define SCABUFSIZE 1024
102#define SCA_MEM_SIZE 0x40000
103#define SCA_BASE_SIZE 512
104#define SCA_REG_SIZE 16
105#define SCA_MAX_PORTS 4
106#define SCAMAXDESC 128
107
108#define BUFFERLISTSIZE 4096
109
110/* SCA-I style DMA buffer descriptor */
111typedef struct _SCADESC
112{
113 u16 next; /* lower l6 bits of next descriptor addr */
114 u16 buf_ptr; /* lower 16 bits of buffer addr */
115 u8 buf_base; /* upper 8 bits of buffer addr */
116 u8 pad1;
117 u16 length; /* length of buffer */
118 u8 status; /* status of buffer */
119 u8 pad2;
120} SCADESC, *PSCADESC;
121
122typedef struct _SCADESC_EX
123{
124 /* device driver bookkeeping section */
125 char *virt_addr; /* virtual address of data buffer */
126 u16 phys_entry; /* lower 16-bits of physical address of this descriptor */
127} SCADESC_EX, *PSCADESC_EX;
128
129/* The queue of BH actions to be performed */
130
131#define BH_RECEIVE 1
132#define BH_TRANSMIT 2
133#define BH_STATUS 4
134
135#define IO_PIN_SHUTDOWN_LIMIT 100
136
137struct _input_signal_events {
138 int ri_up;
139 int ri_down;
140 int dsr_up;
141 int dsr_down;
142 int dcd_up;
143 int dcd_down;
144 int cts_up;
145 int cts_down;
146};
147
148/*
149 * Device instance data structure
150 */
151typedef struct _synclinkmp_info {
152 void *if_ptr; /* General purpose pointer (used by SPPP) */
153 int magic;
154 struct tty_port port;
155 int line;
156 unsigned short close_delay;
157 unsigned short closing_wait; /* time to wait before closing */
158
159 struct mgsl_icount icount;
160
161 int timeout;
162 int x_char; /* xon/xoff character */
163 u16 read_status_mask1; /* break detection (SR1 indications) */
164 u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */
165 unsigned char ignore_status_mask1; /* break detection (SR1 indications) */
166 unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */
167 unsigned char *tx_buf;
168 int tx_put;
169 int tx_get;
170 int tx_count;
171
172 wait_queue_head_t status_event_wait_q;
173 wait_queue_head_t event_wait_q;
174 struct timer_list tx_timer; /* HDLC transmit timeout timer */
175 struct _synclinkmp_info *next_device; /* device list link */
176 struct timer_list status_timer; /* input signal status check timer */
177
178 spinlock_t lock; /* spinlock for synchronizing with ISR */
179 struct work_struct task; /* task structure for scheduling bh */
180
181 u32 max_frame_size; /* as set by device config */
182
183 u32 pending_bh;
184
185 bool bh_running; /* Protection from multiple */
186 int isr_overflow;
187 bool bh_requested;
188
189 int dcd_chkcount; /* check counts to prevent */
190 int cts_chkcount; /* too many IRQs if a signal */
191 int dsr_chkcount; /* is floating */
192 int ri_chkcount;
193
194 char *buffer_list; /* virtual address of Rx & Tx buffer lists */
195 unsigned long buffer_list_phys;
196
197 unsigned int rx_buf_count; /* count of total allocated Rx buffers */
198 SCADESC *rx_buf_list; /* list of receive buffer entries */
199 SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
200 unsigned int current_rx_buf;
201
202 unsigned int tx_buf_count; /* count of total allocated Tx buffers */
203 SCADESC *tx_buf_list; /* list of transmit buffer entries */
204 SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
205 unsigned int last_tx_buf;
206
207 unsigned char *tmp_rx_buf;
208 unsigned int tmp_rx_buf_count;
209
210 bool rx_enabled;
211 bool rx_overflow;
212
213 bool tx_enabled;
214 bool tx_active;
215 u32 idle_mode;
216
217 unsigned char ie0_value;
218 unsigned char ie1_value;
219 unsigned char ie2_value;
220 unsigned char ctrlreg_value;
221 unsigned char old_signals;
222
223 char device_name[25]; /* device instance name */
224
225 int port_count;
226 int adapter_num;
227 int port_num;
228
229 struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
230
231 unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
232
233 unsigned int irq_level; /* interrupt level */
234 unsigned long irq_flags;
235 bool irq_requested; /* true if IRQ requested */
236
237 MGSL_PARAMS params; /* communications parameters */
238
239 unsigned char serial_signals; /* current serial signal states */
240
241 bool irq_occurred; /* for diagnostics use */
242 unsigned int init_error; /* Initialization startup error */
243
244 u32 last_mem_alloc;
245 unsigned char* memory_base; /* shared memory address (PCI only) */
246 u32 phys_memory_base;
247 int shared_mem_requested;
248
249 unsigned char* sca_base; /* HD64570 SCA Memory address */
250 u32 phys_sca_base;
251 u32 sca_offset;
252 bool sca_base_requested;
253
254 unsigned char* lcr_base; /* local config registers (PCI only) */
255 u32 phys_lcr_base;
256 u32 lcr_offset;
257 int lcr_mem_requested;
258
259 unsigned char* statctrl_base; /* status/control register memory */
260 u32 phys_statctrl_base;
261 u32 statctrl_offset;
262 bool sca_statctrl_requested;
263
264 u32 misc_ctrl_value;
265 char *flag_buf;
266 bool drop_rts_on_tx_done;
267
268 struct _input_signal_events input_signal_events;
269
270 /* SPPP/Cisco HDLC device parts */
271 int netcount;
272 spinlock_t netlock;
273
274#if SYNCLINK_GENERIC_HDLC
275 struct net_device *netdev;
276#endif
277
278} SLMP_INFO;
279
280#define MGSL_MAGIC 0x5401
281
282/*
283 * define serial signal status change macros
284 */
285#define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */
286#define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */
287#define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */
288#define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */
289
290/* Common Register macros */
291#define LPR 0x00
292#define PABR0 0x02
293#define PABR1 0x03
294#define WCRL 0x04
295#define WCRM 0x05
296#define WCRH 0x06
297#define DPCR 0x08
298#define DMER 0x09
299#define ISR0 0x10
300#define ISR1 0x11
301#define ISR2 0x12
302#define IER0 0x14
303#define IER1 0x15
304#define IER2 0x16
305#define ITCR 0x18
306#define INTVR 0x1a
307#define IMVR 0x1c
308
309/* MSCI Register macros */
310#define TRB 0x20
311#define TRBL 0x20
312#define TRBH 0x21
313#define SR0 0x22
314#define SR1 0x23
315#define SR2 0x24
316#define SR3 0x25
317#define FST 0x26
318#define IE0 0x28
319#define IE1 0x29
320#define IE2 0x2a
321#define FIE 0x2b
322#define CMD 0x2c
323#define MD0 0x2e
324#define MD1 0x2f
325#define MD2 0x30
326#define CTL 0x31
327#define SA0 0x32
328#define SA1 0x33
329#define IDL 0x34
330#define TMC 0x35
331#define RXS 0x36
332#define TXS 0x37
333#define TRC0 0x38
334#define TRC1 0x39
335#define RRC 0x3a
336#define CST0 0x3c
337#define CST1 0x3d
338
339/* Timer Register Macros */
340#define TCNT 0x60
341#define TCNTL 0x60
342#define TCNTH 0x61
343#define TCONR 0x62
344#define TCONRL 0x62
345#define TCONRH 0x63
346#define TMCS 0x64
347#define TEPR 0x65
348
349/* DMA Controller Register macros */
350#define DARL 0x80
351#define DARH 0x81
352#define DARB 0x82
353#define BAR 0x80
354#define BARL 0x80
355#define BARH 0x81
356#define BARB 0x82
357#define SAR 0x84
358#define SARL 0x84
359#define SARH 0x85
360#define SARB 0x86
361#define CPB 0x86
362#define CDA 0x88
363#define CDAL 0x88
364#define CDAH 0x89
365#define EDA 0x8a
366#define EDAL 0x8a
367#define EDAH 0x8b
368#define BFL 0x8c
369#define BFLL 0x8c
370#define BFLH 0x8d
371#define BCR 0x8e
372#define BCRL 0x8e
373#define BCRH 0x8f
374#define DSR 0x90
375#define DMR 0x91
376#define FCT 0x93
377#define DIR 0x94
378#define DCMD 0x95
379
380/* combine with timer or DMA register address */
381#define TIMER0 0x00
382#define TIMER1 0x08
383#define TIMER2 0x10
384#define TIMER3 0x18
385#define RXDMA 0x00
386#define TXDMA 0x20
387
388/* SCA Command Codes */
389#define NOOP 0x00
390#define TXRESET 0x01
391#define TXENABLE 0x02
392#define TXDISABLE 0x03
393#define TXCRCINIT 0x04
394#define TXCRCEXCL 0x05
395#define TXEOM 0x06
396#define TXABORT 0x07
397#define MPON 0x08
398#define TXBUFCLR 0x09
399#define RXRESET 0x11
400#define RXENABLE 0x12
401#define RXDISABLE 0x13
402#define RXCRCINIT 0x14
403#define RXREJECT 0x15
404#define SEARCHMP 0x16
405#define RXCRCEXCL 0x17
406#define RXCRCCALC 0x18
407#define CHRESET 0x21
408#define HUNT 0x31
409
410/* DMA command codes */
411#define SWABORT 0x01
412#define FEICLEAR 0x02
413
414/* IE0 */
415#define TXINTE BIT7
416#define RXINTE BIT6
417#define TXRDYE BIT1
418#define RXRDYE BIT0
419
420/* IE1 & SR1 */
421#define UDRN BIT7
422#define IDLE BIT6
423#define SYNCD BIT4
424#define FLGD BIT4
425#define CCTS BIT3
426#define CDCD BIT2
427#define BRKD BIT1
428#define ABTD BIT1
429#define GAPD BIT1
430#define BRKE BIT0
431#define IDLD BIT0
432
433/* IE2 & SR2 */
434#define EOM BIT7
435#define PMP BIT6
436#define SHRT BIT6
437#define PE BIT5
438#define ABT BIT5
439#define FRME BIT4
440#define RBIT BIT4
441#define OVRN BIT3
442#define CRCE BIT2
443
444
445/*
446 * Global linked list of SyncLink devices
447 */
448static SLMP_INFO *synclinkmp_device_list = NULL;
449static int synclinkmp_adapter_count = -1;
450static int synclinkmp_device_count = 0;
451
452/*
453 * Set this param to non-zero to load eax with the
454 * .text section address and breakpoint on module load.
455 * This is useful for use with gdb and add-symbol-file command.
456 */
457static bool break_on_load = 0;
458
459/*
460 * Driver major number, defaults to zero to get auto
461 * assigned major number. May be forced as module parameter.
462 */
463static int ttymajor = 0;
464
465/*
466 * Array of user specified options for ISA adapters.
467 */
468static int debug_level = 0;
469static int maxframe[MAX_DEVICES] = {0,};
470
471module_param(break_on_load, bool, 0);
472module_param(ttymajor, int, 0);
473module_param(debug_level, int, 0);
474module_param_array(maxframe, int, NULL, 0);
475
476static char *driver_name = "SyncLink MultiPort driver";
477static char *driver_version = "$Revision: 4.38 $";
478
479static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
480static void synclinkmp_remove_one(struct pci_dev *dev);
481
482static const struct pci_device_id synclinkmp_pci_tbl[] = {
483 { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
484 { 0, }, /* terminate list */
485};
486MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
487
488MODULE_LICENSE("GPL");
489
490static struct pci_driver synclinkmp_pci_driver = {
491 .name = "synclinkmp",
492 .id_table = synclinkmp_pci_tbl,
493 .probe = synclinkmp_init_one,
494 .remove = synclinkmp_remove_one,
495};
496
497
498static struct tty_driver *serial_driver;
499
500/* number of characters left in xmit buffer before we ask for more */
501#define WAKEUP_CHARS 256
502
503
504/* tty callbacks */
505
506static int open(struct tty_struct *tty, struct file * filp);
507static void close(struct tty_struct *tty, struct file * filp);
508static void hangup(struct tty_struct *tty);
509static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
510
511static int write(struct tty_struct *tty, const unsigned char *buf, int count);
512static int put_char(struct tty_struct *tty, unsigned char ch);
513static void send_xchar(struct tty_struct *tty, char ch);
514static void wait_until_sent(struct tty_struct *tty, int timeout);
515static int write_room(struct tty_struct *tty);
516static void flush_chars(struct tty_struct *tty);
517static void flush_buffer(struct tty_struct *tty);
518static void tx_hold(struct tty_struct *tty);
519static void tx_release(struct tty_struct *tty);
520
521static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
522static int chars_in_buffer(struct tty_struct *tty);
523static void throttle(struct tty_struct * tty);
524static void unthrottle(struct tty_struct * tty);
525static int set_break(struct tty_struct *tty, int break_state);
526
527#if SYNCLINK_GENERIC_HDLC
528#define dev_to_port(D) (dev_to_hdlc(D)->priv)
529static void hdlcdev_tx_done(SLMP_INFO *info);
530static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
531static int hdlcdev_init(SLMP_INFO *info);
532static void hdlcdev_exit(SLMP_INFO *info);
533#endif
534
535/* ioctl handlers */
536
537static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
538static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
539static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
540static int get_txidle(SLMP_INFO *info, int __user *idle_mode);
541static int set_txidle(SLMP_INFO *info, int idle_mode);
542static int tx_enable(SLMP_INFO *info, int enable);
543static int tx_abort(SLMP_INFO *info);
544static int rx_enable(SLMP_INFO *info, int enable);
545static int modem_input_wait(SLMP_INFO *info,int arg);
546static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
547static int tiocmget(struct tty_struct *tty);
548static int tiocmset(struct tty_struct *tty,
549 unsigned int set, unsigned int clear);
550static int set_break(struct tty_struct *tty, int break_state);
551
552static int add_device(SLMP_INFO *info);
553static int device_init(int adapter_num, struct pci_dev *pdev);
554static int claim_resources(SLMP_INFO *info);
555static void release_resources(SLMP_INFO *info);
556
557static int startup(SLMP_INFO *info);
558static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
559static int carrier_raised(struct tty_port *port);
560static void shutdown(SLMP_INFO *info);
561static void program_hw(SLMP_INFO *info);
562static void change_params(SLMP_INFO *info);
563
564static bool init_adapter(SLMP_INFO *info);
565static bool register_test(SLMP_INFO *info);
566static bool irq_test(SLMP_INFO *info);
567static bool loopback_test(SLMP_INFO *info);
568static int adapter_test(SLMP_INFO *info);
569static bool memory_test(SLMP_INFO *info);
570
571static void reset_adapter(SLMP_INFO *info);
572static void reset_port(SLMP_INFO *info);
573static void async_mode(SLMP_INFO *info);
574static void hdlc_mode(SLMP_INFO *info);
575
576static void rx_stop(SLMP_INFO *info);
577static void rx_start(SLMP_INFO *info);
578static void rx_reset_buffers(SLMP_INFO *info);
579static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
580static bool rx_get_frame(SLMP_INFO *info);
581
582static void tx_start(SLMP_INFO *info);
583static void tx_stop(SLMP_INFO *info);
584static void tx_load_fifo(SLMP_INFO *info);
585static void tx_set_idle(SLMP_INFO *info);
586static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
587
588static void get_signals(SLMP_INFO *info);
589static void set_signals(SLMP_INFO *info);
590static void enable_loopback(SLMP_INFO *info, int enable);
591static void set_rate(SLMP_INFO *info, u32 data_rate);
592
593static int bh_action(SLMP_INFO *info);
594static void bh_handler(struct work_struct *work);
595static void bh_receive(SLMP_INFO *info);
596static void bh_transmit(SLMP_INFO *info);
597static void bh_status(SLMP_INFO *info);
598static void isr_timer(SLMP_INFO *info);
599static void isr_rxint(SLMP_INFO *info);
600static void isr_rxrdy(SLMP_INFO *info);
601static void isr_txint(SLMP_INFO *info);
602static void isr_txrdy(SLMP_INFO *info);
603static void isr_rxdmaok(SLMP_INFO *info);
604static void isr_rxdmaerror(SLMP_INFO *info);
605static void isr_txdmaok(SLMP_INFO *info);
606static void isr_txdmaerror(SLMP_INFO *info);
607static void isr_io_pin(SLMP_INFO *info, u16 status);
608
609static int alloc_dma_bufs(SLMP_INFO *info);
610static void free_dma_bufs(SLMP_INFO *info);
611static int alloc_buf_list(SLMP_INFO *info);
612static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
613static int alloc_tmp_rx_buf(SLMP_INFO *info);
614static void free_tmp_rx_buf(SLMP_INFO *info);
615
616static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
617static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
618static void tx_timeout(struct timer_list *t);
619static void status_timeout(struct timer_list *t);
620
621static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
622static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
623static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
624static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
625static unsigned char read_status_reg(SLMP_INFO * info);
626static void write_control_reg(SLMP_INFO * info);
627
628
629static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes
630static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes
631static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
632
633static u32 misc_ctrl_value = 0x007e4040;
634static u32 lcr1_brdr_value = 0x00800028;
635
636static u32 read_ahead_count = 8;
637
638/* DPCR, DMA Priority Control
639 *
640 * 07..05 Not used, must be 0
641 * 04 BRC, bus release condition: 0=all transfers complete
642 * 1=release after 1 xfer on all channels
643 * 03 CCC, channel change condition: 0=every cycle
644 * 1=after each channel completes all xfers
645 * 02..00 PR<2..0>, priority 100=round robin
646 *
647 * 00000100 = 0x00
648 */
649static unsigned char dma_priority = 0x04;
650
651// Number of bytes that can be written to shared RAM
652// in a single write operation
653static u32 sca_pci_load_interval = 64;
654
655/*
656 * 1st function defined in .text section. Calling this function in
657 * init_module() followed by a breakpoint allows a remote debugger
658 * (gdb) to get the .text address for the add-symbol-file command.
659 * This allows remote debugging of dynamically loadable modules.
660 */
661static void* synclinkmp_get_text_ptr(void);
662static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
663
664static inline int sanity_check(SLMP_INFO *info,
665 char *name, const char *routine)
666{
667#ifdef SANITY_CHECK
668 static const char *badmagic =
669 "Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
670 static const char *badinfo =
671 "Warning: null synclinkmp_struct for (%s) in %s\n";
672
673 if (!info) {
674 printk(badinfo, name, routine);
675 return 1;
676 }
677 if (info->magic != MGSL_MAGIC) {
678 printk(badmagic, name, routine);
679 return 1;
680 }
681#else
682 if (!info)
683 return 1;
684#endif
685 return 0;
686}
687
688/**
689 * line discipline callback wrappers
690 *
691 * The wrappers maintain line discipline references
692 * while calling into the line discipline.
693 *
694 * ldisc_receive_buf - pass receive data to line discipline
695 */
696
697static void ldisc_receive_buf(struct tty_struct *tty,
698 const __u8 *data, char *flags, int count)
699{
700 struct tty_ldisc *ld;
701 if (!tty)
702 return;
703 ld = tty_ldisc_ref(tty);
704 if (ld) {
705 if (ld->ops->receive_buf)
706 ld->ops->receive_buf(tty, data, flags, count);
707 tty_ldisc_deref(ld);
708 }
709}
710
711/* tty callbacks */
712
713static int install(struct tty_driver *driver, struct tty_struct *tty)
714{
715 SLMP_INFO *info;
716 int line = tty->index;
717
718 if (line >= synclinkmp_device_count) {
719 printk("%s(%d): open with invalid line #%d.\n",
720 __FILE__,__LINE__,line);
721 return -ENODEV;
722 }
723
724 info = synclinkmp_device_list;
725 while (info && info->line != line)
726 info = info->next_device;
727 if (sanity_check(info, tty->name, "open"))
728 return -ENODEV;
729 if (info->init_error) {
730 printk("%s(%d):%s device is not allocated, init error=%d\n",
731 __FILE__, __LINE__, info->device_name,
732 info->init_error);
733 return -ENODEV;
734 }
735
736 tty->driver_data = info;
737
738 return tty_port_install(&info->port, driver, tty);
739}
740
741/* Called when a port is opened. Init and enable port.
742 */
743static int open(struct tty_struct *tty, struct file *filp)
744{
745 SLMP_INFO *info = tty->driver_data;
746 unsigned long flags;
747 int retval;
748
749 info->port.tty = tty;
750
751 if (debug_level >= DEBUG_LEVEL_INFO)
752 printk("%s(%d):%s open(), old ref count = %d\n",
753 __FILE__,__LINE__,tty->driver->name, info->port.count);
754
755 info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
756
757 spin_lock_irqsave(&info->netlock, flags);
758 if (info->netcount) {
759 retval = -EBUSY;
760 spin_unlock_irqrestore(&info->netlock, flags);
761 goto cleanup;
762 }
763 info->port.count++;
764 spin_unlock_irqrestore(&info->netlock, flags);
765
766 if (info->port.count == 1) {
767 /* 1st open on this device, init hardware */
768 retval = startup(info);
769 if (retval < 0)
770 goto cleanup;
771 }
772
773 retval = block_til_ready(tty, filp, info);
774 if (retval) {
775 if (debug_level >= DEBUG_LEVEL_INFO)
776 printk("%s(%d):%s block_til_ready() returned %d\n",
777 __FILE__,__LINE__, info->device_name, retval);
778 goto cleanup;
779 }
780
781 if (debug_level >= DEBUG_LEVEL_INFO)
782 printk("%s(%d):%s open() success\n",
783 __FILE__,__LINE__, info->device_name);
784 retval = 0;
785
786cleanup:
787 if (retval) {
788 if (tty->count == 1)
789 info->port.tty = NULL; /* tty layer will release tty struct */
790 if(info->port.count)
791 info->port.count--;
792 }
793
794 return retval;
795}
796
797/* Called when port is closed. Wait for remaining data to be
798 * sent. Disable port and free resources.
799 */
800static void close(struct tty_struct *tty, struct file *filp)
801{
802 SLMP_INFO * info = tty->driver_data;
803
804 if (sanity_check(info, tty->name, "close"))
805 return;
806
807 if (debug_level >= DEBUG_LEVEL_INFO)
808 printk("%s(%d):%s close() entry, count=%d\n",
809 __FILE__,__LINE__, info->device_name, info->port.count);
810
811 if (tty_port_close_start(&info->port, tty, filp) == 0)
812 goto cleanup;
813
814 mutex_lock(&info->port.mutex);
815 if (tty_port_initialized(&info->port))
816 wait_until_sent(tty, info->timeout);
817
818 flush_buffer(tty);
819 tty_ldisc_flush(tty);
820 shutdown(info);
821 mutex_unlock(&info->port.mutex);
822
823 tty_port_close_end(&info->port, tty);
824 info->port.tty = NULL;
825cleanup:
826 if (debug_level >= DEBUG_LEVEL_INFO)
827 printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
828 tty->driver->name, info->port.count);
829}
830
831/* Called by tty_hangup() when a hangup is signaled.
832 * This is the same as closing all open descriptors for the port.
833 */
834static void hangup(struct tty_struct *tty)
835{
836 SLMP_INFO *info = tty->driver_data;
837 unsigned long flags;
838
839 if (debug_level >= DEBUG_LEVEL_INFO)
840 printk("%s(%d):%s hangup()\n",
841 __FILE__,__LINE__, info->device_name );
842
843 if (sanity_check(info, tty->name, "hangup"))
844 return;
845
846 mutex_lock(&info->port.mutex);
847 flush_buffer(tty);
848 shutdown(info);
849
850 spin_lock_irqsave(&info->port.lock, flags);
851 info->port.count = 0;
852 info->port.tty = NULL;
853 spin_unlock_irqrestore(&info->port.lock, flags);
854 tty_port_set_active(&info->port, 1);
855 mutex_unlock(&info->port.mutex);
856
857 wake_up_interruptible(&info->port.open_wait);
858}
859
860/* Set new termios settings
861 */
862static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
863{
864 SLMP_INFO *info = tty->driver_data;
865 unsigned long flags;
866
867 if (debug_level >= DEBUG_LEVEL_INFO)
868 printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
869 tty->driver->name );
870
871 change_params(info);
872
873 /* Handle transition to B0 status */
874 if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
875 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
876 spin_lock_irqsave(&info->lock,flags);
877 set_signals(info);
878 spin_unlock_irqrestore(&info->lock,flags);
879 }
880
881 /* Handle transition away from B0 status */
882 if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
883 info->serial_signals |= SerialSignal_DTR;
884 if (!C_CRTSCTS(tty) || !tty_throttled(tty))
885 info->serial_signals |= SerialSignal_RTS;
886 spin_lock_irqsave(&info->lock,flags);
887 set_signals(info);
888 spin_unlock_irqrestore(&info->lock,flags);
889 }
890
891 /* Handle turning off CRTSCTS */
892 if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
893 tty->hw_stopped = 0;
894 tx_release(tty);
895 }
896}
897
898/* Send a block of data
899 *
900 * Arguments:
901 *
902 * tty pointer to tty information structure
903 * buf pointer to buffer containing send data
904 * count size of send data in bytes
905 *
906 * Return Value: number of characters written
907 */
908static int write(struct tty_struct *tty,
909 const unsigned char *buf, int count)
910{
911 int c, ret = 0;
912 SLMP_INFO *info = tty->driver_data;
913 unsigned long flags;
914
915 if (debug_level >= DEBUG_LEVEL_INFO)
916 printk("%s(%d):%s write() count=%d\n",
917 __FILE__,__LINE__,info->device_name,count);
918
919 if (sanity_check(info, tty->name, "write"))
920 goto cleanup;
921
922 if (!info->tx_buf)
923 goto cleanup;
924
925 if (info->params.mode == MGSL_MODE_HDLC) {
926 if (count > info->max_frame_size) {
927 ret = -EIO;
928 goto cleanup;
929 }
930 if (info->tx_active)
931 goto cleanup;
932 if (info->tx_count) {
933 /* send accumulated data from send_char() calls */
934 /* as frame and wait before accepting more data. */
935 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
936 goto start;
937 }
938 ret = info->tx_count = count;
939 tx_load_dma_buffer(info, buf, count);
940 goto start;
941 }
942
943 for (;;) {
944 c = min_t(int, count,
945 min(info->max_frame_size - info->tx_count - 1,
946 info->max_frame_size - info->tx_put));
947 if (c <= 0)
948 break;
949
950 memcpy(info->tx_buf + info->tx_put, buf, c);
951
952 spin_lock_irqsave(&info->lock,flags);
953 info->tx_put += c;
954 if (info->tx_put >= info->max_frame_size)
955 info->tx_put -= info->max_frame_size;
956 info->tx_count += c;
957 spin_unlock_irqrestore(&info->lock,flags);
958
959 buf += c;
960 count -= c;
961 ret += c;
962 }
963
964 if (info->params.mode == MGSL_MODE_HDLC) {
965 if (count) {
966 ret = info->tx_count = 0;
967 goto cleanup;
968 }
969 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
970 }
971start:
972 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
973 spin_lock_irqsave(&info->lock,flags);
974 if (!info->tx_active)
975 tx_start(info);
976 spin_unlock_irqrestore(&info->lock,flags);
977 }
978
979cleanup:
980 if (debug_level >= DEBUG_LEVEL_INFO)
981 printk( "%s(%d):%s write() returning=%d\n",
982 __FILE__,__LINE__,info->device_name,ret);
983 return ret;
984}
985
986/* Add a character to the transmit buffer.
987 */
988static int put_char(struct tty_struct *tty, unsigned char ch)
989{
990 SLMP_INFO *info = tty->driver_data;
991 unsigned long flags;
992 int ret = 0;
993
994 if ( debug_level >= DEBUG_LEVEL_INFO ) {
995 printk( "%s(%d):%s put_char(%d)\n",
996 __FILE__,__LINE__,info->device_name,ch);
997 }
998
999 if (sanity_check(info, tty->name, "put_char"))
1000 return 0;
1001
1002 if (!info->tx_buf)
1003 return 0;
1004
1005 spin_lock_irqsave(&info->lock,flags);
1006
1007 if ( (info->params.mode != MGSL_MODE_HDLC) ||
1008 !info->tx_active ) {
1009
1010 if (info->tx_count < info->max_frame_size - 1) {
1011 info->tx_buf[info->tx_put++] = ch;
1012 if (info->tx_put >= info->max_frame_size)
1013 info->tx_put -= info->max_frame_size;
1014 info->tx_count++;
1015 ret = 1;
1016 }
1017 }
1018
1019 spin_unlock_irqrestore(&info->lock,flags);
1020 return ret;
1021}
1022
1023/* Send a high-priority XON/XOFF character
1024 */
1025static void send_xchar(struct tty_struct *tty, char ch)
1026{
1027 SLMP_INFO *info = tty->driver_data;
1028 unsigned long flags;
1029
1030 if (debug_level >= DEBUG_LEVEL_INFO)
1031 printk("%s(%d):%s send_xchar(%d)\n",
1032 __FILE__,__LINE__, info->device_name, ch );
1033
1034 if (sanity_check(info, tty->name, "send_xchar"))
1035 return;
1036
1037 info->x_char = ch;
1038 if (ch) {
1039 /* Make sure transmit interrupts are on */
1040 spin_lock_irqsave(&info->lock,flags);
1041 if (!info->tx_enabled)
1042 tx_start(info);
1043 spin_unlock_irqrestore(&info->lock,flags);
1044 }
1045}
1046
1047/* Wait until the transmitter is empty.
1048 */
1049static void wait_until_sent(struct tty_struct *tty, int timeout)
1050{
1051 SLMP_INFO * info = tty->driver_data;
1052 unsigned long orig_jiffies, char_time;
1053
1054 if (!info )
1055 return;
1056
1057 if (debug_level >= DEBUG_LEVEL_INFO)
1058 printk("%s(%d):%s wait_until_sent() entry\n",
1059 __FILE__,__LINE__, info->device_name );
1060
1061 if (sanity_check(info, tty->name, "wait_until_sent"))
1062 return;
1063
1064 if (!tty_port_initialized(&info->port))
1065 goto exit;
1066
1067 orig_jiffies = jiffies;
1068
1069 /* Set check interval to 1/5 of estimated time to
1070 * send a character, and make it at least 1. The check
1071 * interval should also be less than the timeout.
1072 * Note: use tight timings here to satisfy the NIST-PCTS.
1073 */
1074
1075 if ( info->params.data_rate ) {
1076 char_time = info->timeout/(32 * 5);
1077 if (!char_time)
1078 char_time++;
1079 } else
1080 char_time = 1;
1081
1082 if (timeout)
1083 char_time = min_t(unsigned long, char_time, timeout);
1084
1085 if ( info->params.mode == MGSL_MODE_HDLC ) {
1086 while (info->tx_active) {
1087 msleep_interruptible(jiffies_to_msecs(char_time));
1088 if (signal_pending(current))
1089 break;
1090 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1091 break;
1092 }
1093 } else {
1094 /*
1095 * TODO: determine if there is something similar to USC16C32
1096 * TXSTATUS_ALL_SENT status
1097 */
1098 while ( info->tx_active && info->tx_enabled) {
1099 msleep_interruptible(jiffies_to_msecs(char_time));
1100 if (signal_pending(current))
1101 break;
1102 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1103 break;
1104 }
1105 }
1106
1107exit:
1108 if (debug_level >= DEBUG_LEVEL_INFO)
1109 printk("%s(%d):%s wait_until_sent() exit\n",
1110 __FILE__,__LINE__, info->device_name );
1111}
1112
1113/* Return the count of free bytes in transmit buffer
1114 */
1115static int write_room(struct tty_struct *tty)
1116{
1117 SLMP_INFO *info = tty->driver_data;
1118 int ret;
1119
1120 if (sanity_check(info, tty->name, "write_room"))
1121 return 0;
1122
1123 if (info->params.mode == MGSL_MODE_HDLC) {
1124 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1125 } else {
1126 ret = info->max_frame_size - info->tx_count - 1;
1127 if (ret < 0)
1128 ret = 0;
1129 }
1130
1131 if (debug_level >= DEBUG_LEVEL_INFO)
1132 printk("%s(%d):%s write_room()=%d\n",
1133 __FILE__, __LINE__, info->device_name, ret);
1134
1135 return ret;
1136}
1137
1138/* enable transmitter and send remaining buffered characters
1139 */
1140static void flush_chars(struct tty_struct *tty)
1141{
1142 SLMP_INFO *info = tty->driver_data;
1143 unsigned long flags;
1144
1145 if ( debug_level >= DEBUG_LEVEL_INFO )
1146 printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
1147 __FILE__,__LINE__,info->device_name,info->tx_count);
1148
1149 if (sanity_check(info, tty->name, "flush_chars"))
1150 return;
1151
1152 if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
1153 !info->tx_buf)
1154 return;
1155
1156 if ( debug_level >= DEBUG_LEVEL_INFO )
1157 printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
1158 __FILE__,__LINE__,info->device_name );
1159
1160 spin_lock_irqsave(&info->lock,flags);
1161
1162 if (!info->tx_active) {
1163 if ( (info->params.mode == MGSL_MODE_HDLC) &&
1164 info->tx_count ) {
1165 /* operating in synchronous (frame oriented) mode */
1166 /* copy data from circular tx_buf to */
1167 /* transmit DMA buffer. */
1168 tx_load_dma_buffer(info,
1169 info->tx_buf,info->tx_count);
1170 }
1171 tx_start(info);
1172 }
1173
1174 spin_unlock_irqrestore(&info->lock,flags);
1175}
1176
1177/* Discard all data in the send buffer
1178 */
1179static void flush_buffer(struct tty_struct *tty)
1180{
1181 SLMP_INFO *info = tty->driver_data;
1182 unsigned long flags;
1183
1184 if (debug_level >= DEBUG_LEVEL_INFO)
1185 printk("%s(%d):%s flush_buffer() entry\n",
1186 __FILE__,__LINE__, info->device_name );
1187
1188 if (sanity_check(info, tty->name, "flush_buffer"))
1189 return;
1190
1191 spin_lock_irqsave(&info->lock,flags);
1192 info->tx_count = info->tx_put = info->tx_get = 0;
1193 del_timer(&info->tx_timer);
1194 spin_unlock_irqrestore(&info->lock,flags);
1195
1196 tty_wakeup(tty);
1197}
1198
1199/* throttle (stop) transmitter
1200 */
1201static void tx_hold(struct tty_struct *tty)
1202{
1203 SLMP_INFO *info = tty->driver_data;
1204 unsigned long flags;
1205
1206 if (sanity_check(info, tty->name, "tx_hold"))
1207 return;
1208
1209 if ( debug_level >= DEBUG_LEVEL_INFO )
1210 printk("%s(%d):%s tx_hold()\n",
1211 __FILE__,__LINE__,info->device_name);
1212
1213 spin_lock_irqsave(&info->lock,flags);
1214 if (info->tx_enabled)
1215 tx_stop(info);
1216 spin_unlock_irqrestore(&info->lock,flags);
1217}
1218
1219/* release (start) transmitter
1220 */
1221static void tx_release(struct tty_struct *tty)
1222{
1223 SLMP_INFO *info = tty->driver_data;
1224 unsigned long flags;
1225
1226 if (sanity_check(info, tty->name, "tx_release"))
1227 return;
1228
1229 if ( debug_level >= DEBUG_LEVEL_INFO )
1230 printk("%s(%d):%s tx_release()\n",
1231 __FILE__,__LINE__,info->device_name);
1232
1233 spin_lock_irqsave(&info->lock,flags);
1234 if (!info->tx_enabled)
1235 tx_start(info);
1236 spin_unlock_irqrestore(&info->lock,flags);
1237}
1238
1239/* Service an IOCTL request
1240 *
1241 * Arguments:
1242 *
1243 * tty pointer to tty instance data
1244 * cmd IOCTL command code
1245 * arg command argument/context
1246 *
1247 * Return Value: 0 if success, otherwise error code
1248 */
1249static int ioctl(struct tty_struct *tty,
1250 unsigned int cmd, unsigned long arg)
1251{
1252 SLMP_INFO *info = tty->driver_data;
1253 void __user *argp = (void __user *)arg;
1254
1255 if (debug_level >= DEBUG_LEVEL_INFO)
1256 printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
1257 info->device_name, cmd );
1258
1259 if (sanity_check(info, tty->name, "ioctl"))
1260 return -ENODEV;
1261
1262 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1263 (cmd != TIOCMIWAIT)) {
1264 if (tty_io_error(tty))
1265 return -EIO;
1266 }
1267
1268 switch (cmd) {
1269 case MGSL_IOCGPARAMS:
1270 return get_params(info, argp);
1271 case MGSL_IOCSPARAMS:
1272 return set_params(info, argp);
1273 case MGSL_IOCGTXIDLE:
1274 return get_txidle(info, argp);
1275 case MGSL_IOCSTXIDLE:
1276 return set_txidle(info, (int)arg);
1277 case MGSL_IOCTXENABLE:
1278 return tx_enable(info, (int)arg);
1279 case MGSL_IOCRXENABLE:
1280 return rx_enable(info, (int)arg);
1281 case MGSL_IOCTXABORT:
1282 return tx_abort(info);
1283 case MGSL_IOCGSTATS:
1284 return get_stats(info, argp);
1285 case MGSL_IOCWAITEVENT:
1286 return wait_mgsl_event(info, argp);
1287 case MGSL_IOCLOOPTXDONE:
1288 return 0; // TODO: Not supported, need to document
1289 /* Wait for modem input (DCD,RI,DSR,CTS) change
1290 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
1291 */
1292 case TIOCMIWAIT:
1293 return modem_input_wait(info,(int)arg);
1294
1295 /*
1296 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1297 * Return: write counters to the user passed counter struct
1298 * NB: both 1->0 and 0->1 transitions are counted except for
1299 * RI where only 0->1 is counted.
1300 */
1301 default:
1302 return -ENOIOCTLCMD;
1303 }
1304 return 0;
1305}
1306
1307static int get_icount(struct tty_struct *tty,
1308 struct serial_icounter_struct *icount)
1309{
1310 SLMP_INFO *info = tty->driver_data;
1311 struct mgsl_icount cnow; /* kernel counter temps */
1312 unsigned long flags;
1313
1314 spin_lock_irqsave(&info->lock,flags);
1315 cnow = info->icount;
1316 spin_unlock_irqrestore(&info->lock,flags);
1317
1318 icount->cts = cnow.cts;
1319 icount->dsr = cnow.dsr;
1320 icount->rng = cnow.rng;
1321 icount->dcd = cnow.dcd;
1322 icount->rx = cnow.rx;
1323 icount->tx = cnow.tx;
1324 icount->frame = cnow.frame;
1325 icount->overrun = cnow.overrun;
1326 icount->parity = cnow.parity;
1327 icount->brk = cnow.brk;
1328 icount->buf_overrun = cnow.buf_overrun;
1329
1330 return 0;
1331}
1332
1333/*
1334 * /proc fs routines....
1335 */
1336
1337static inline void line_info(struct seq_file *m, SLMP_INFO *info)
1338{
1339 char stat_buf[30];
1340 unsigned long flags;
1341
1342 seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
1343 "\tIRQ=%d MaxFrameSize=%u\n",
1344 info->device_name,
1345 info->phys_sca_base,
1346 info->phys_memory_base,
1347 info->phys_statctrl_base,
1348 info->phys_lcr_base,
1349 info->irq_level,
1350 info->max_frame_size );
1351
1352 /* output current serial signal states */
1353 spin_lock_irqsave(&info->lock,flags);
1354 get_signals(info);
1355 spin_unlock_irqrestore(&info->lock,flags);
1356
1357 stat_buf[0] = 0;
1358 stat_buf[1] = 0;
1359 if (info->serial_signals & SerialSignal_RTS)
1360 strcat(stat_buf, "|RTS");
1361 if (info->serial_signals & SerialSignal_CTS)
1362 strcat(stat_buf, "|CTS");
1363 if (info->serial_signals & SerialSignal_DTR)
1364 strcat(stat_buf, "|DTR");
1365 if (info->serial_signals & SerialSignal_DSR)
1366 strcat(stat_buf, "|DSR");
1367 if (info->serial_signals & SerialSignal_DCD)
1368 strcat(stat_buf, "|CD");
1369 if (info->serial_signals & SerialSignal_RI)
1370 strcat(stat_buf, "|RI");
1371
1372 if (info->params.mode == MGSL_MODE_HDLC) {
1373 seq_printf(m, "\tHDLC txok:%d rxok:%d",
1374 info->icount.txok, info->icount.rxok);
1375 if (info->icount.txunder)
1376 seq_printf(m, " txunder:%d", info->icount.txunder);
1377 if (info->icount.txabort)
1378 seq_printf(m, " txabort:%d", info->icount.txabort);
1379 if (info->icount.rxshort)
1380 seq_printf(m, " rxshort:%d", info->icount.rxshort);
1381 if (info->icount.rxlong)
1382 seq_printf(m, " rxlong:%d", info->icount.rxlong);
1383 if (info->icount.rxover)
1384 seq_printf(m, " rxover:%d", info->icount.rxover);
1385 if (info->icount.rxcrc)
1386 seq_printf(m, " rxlong:%d", info->icount.rxcrc);
1387 } else {
1388 seq_printf(m, "\tASYNC tx:%d rx:%d",
1389 info->icount.tx, info->icount.rx);
1390 if (info->icount.frame)
1391 seq_printf(m, " fe:%d", info->icount.frame);
1392 if (info->icount.parity)
1393 seq_printf(m, " pe:%d", info->icount.parity);
1394 if (info->icount.brk)
1395 seq_printf(m, " brk:%d", info->icount.brk);
1396 if (info->icount.overrun)
1397 seq_printf(m, " oe:%d", info->icount.overrun);
1398 }
1399
1400 /* Append serial signal status to end */
1401 seq_printf(m, " %s\n", stat_buf+1);
1402
1403 seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1404 info->tx_active,info->bh_requested,info->bh_running,
1405 info->pending_bh);
1406}
1407
1408/* Called to print information about devices
1409 */
1410static int synclinkmp_proc_show(struct seq_file *m, void *v)
1411{
1412 SLMP_INFO *info;
1413
1414 seq_printf(m, "synclinkmp driver:%s\n", driver_version);
1415
1416 info = synclinkmp_device_list;
1417 while( info ) {
1418 line_info(m, info);
1419 info = info->next_device;
1420 }
1421 return 0;
1422}
1423
1424static int synclinkmp_proc_open(struct inode *inode, struct file *file)
1425{
1426 return single_open(file, synclinkmp_proc_show, NULL);
1427}
1428
1429static const struct file_operations synclinkmp_proc_fops = {
1430 .owner = THIS_MODULE,
1431 .open = synclinkmp_proc_open,
1432 .read = seq_read,
1433 .llseek = seq_lseek,
1434 .release = single_release,
1435};
1436
1437/* Return the count of bytes in transmit buffer
1438 */
1439static int chars_in_buffer(struct tty_struct *tty)
1440{
1441 SLMP_INFO *info = tty->driver_data;
1442
1443 if (sanity_check(info, tty->name, "chars_in_buffer"))
1444 return 0;
1445
1446 if (debug_level >= DEBUG_LEVEL_INFO)
1447 printk("%s(%d):%s chars_in_buffer()=%d\n",
1448 __FILE__, __LINE__, info->device_name, info->tx_count);
1449
1450 return info->tx_count;
1451}
1452
1453/* Signal remote device to throttle send data (our receive data)
1454 */
1455static void throttle(struct tty_struct * tty)
1456{
1457 SLMP_INFO *info = tty->driver_data;
1458 unsigned long flags;
1459
1460 if (debug_level >= DEBUG_LEVEL_INFO)
1461 printk("%s(%d):%s throttle() entry\n",
1462 __FILE__,__LINE__, info->device_name );
1463
1464 if (sanity_check(info, tty->name, "throttle"))
1465 return;
1466
1467 if (I_IXOFF(tty))
1468 send_xchar(tty, STOP_CHAR(tty));
1469
1470 if (C_CRTSCTS(tty)) {
1471 spin_lock_irqsave(&info->lock,flags);
1472 info->serial_signals &= ~SerialSignal_RTS;
1473 set_signals(info);
1474 spin_unlock_irqrestore(&info->lock,flags);
1475 }
1476}
1477
1478/* Signal remote device to stop throttling send data (our receive data)
1479 */
1480static void unthrottle(struct tty_struct * tty)
1481{
1482 SLMP_INFO *info = tty->driver_data;
1483 unsigned long flags;
1484
1485 if (debug_level >= DEBUG_LEVEL_INFO)
1486 printk("%s(%d):%s unthrottle() entry\n",
1487 __FILE__,__LINE__, info->device_name );
1488
1489 if (sanity_check(info, tty->name, "unthrottle"))
1490 return;
1491
1492 if (I_IXOFF(tty)) {
1493 if (info->x_char)
1494 info->x_char = 0;
1495 else
1496 send_xchar(tty, START_CHAR(tty));
1497 }
1498
1499 if (C_CRTSCTS(tty)) {
1500 spin_lock_irqsave(&info->lock,flags);
1501 info->serial_signals |= SerialSignal_RTS;
1502 set_signals(info);
1503 spin_unlock_irqrestore(&info->lock,flags);
1504 }
1505}
1506
1507/* set or clear transmit break condition
1508 * break_state -1=set break condition, 0=clear
1509 */
1510static int set_break(struct tty_struct *tty, int break_state)
1511{
1512 unsigned char RegValue;
1513 SLMP_INFO * info = tty->driver_data;
1514 unsigned long flags;
1515
1516 if (debug_level >= DEBUG_LEVEL_INFO)
1517 printk("%s(%d):%s set_break(%d)\n",
1518 __FILE__,__LINE__, info->device_name, break_state);
1519
1520 if (sanity_check(info, tty->name, "set_break"))
1521 return -EINVAL;
1522
1523 spin_lock_irqsave(&info->lock,flags);
1524 RegValue = read_reg(info, CTL);
1525 if (break_state == -1)
1526 RegValue |= BIT3;
1527 else
1528 RegValue &= ~BIT3;
1529 write_reg(info, CTL, RegValue);
1530 spin_unlock_irqrestore(&info->lock,flags);
1531 return 0;
1532}
1533
1534#if SYNCLINK_GENERIC_HDLC
1535
1536/**
1537 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1538 * set encoding and frame check sequence (FCS) options
1539 *
1540 * dev pointer to network device structure
1541 * encoding serial encoding setting
1542 * parity FCS setting
1543 *
1544 * returns 0 if success, otherwise error code
1545 */
1546static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1547 unsigned short parity)
1548{
1549 SLMP_INFO *info = dev_to_port(dev);
1550 unsigned char new_encoding;
1551 unsigned short new_crctype;
1552
1553 /* return error if TTY interface open */
1554 if (info->port.count)
1555 return -EBUSY;
1556
1557 switch (encoding)
1558 {
1559 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1560 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1561 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1562 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1563 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1564 default: return -EINVAL;
1565 }
1566
1567 switch (parity)
1568 {
1569 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1570 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1571 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1572 default: return -EINVAL;
1573 }
1574
1575 info->params.encoding = new_encoding;
1576 info->params.crc_type = new_crctype;
1577
1578 /* if network interface up, reprogram hardware */
1579 if (info->netcount)
1580 program_hw(info);
1581
1582 return 0;
1583}
1584
1585/**
1586 * called by generic HDLC layer to send frame
1587 *
1588 * skb socket buffer containing HDLC frame
1589 * dev pointer to network device structure
1590 */
1591static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
1592 struct net_device *dev)
1593{
1594 SLMP_INFO *info = dev_to_port(dev);
1595 unsigned long flags;
1596
1597 if (debug_level >= DEBUG_LEVEL_INFO)
1598 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
1599
1600 /* stop sending until this frame completes */
1601 netif_stop_queue(dev);
1602
1603 /* copy data to device buffers */
1604 info->tx_count = skb->len;
1605 tx_load_dma_buffer(info, skb->data, skb->len);
1606
1607 /* update network statistics */
1608 dev->stats.tx_packets++;
1609 dev->stats.tx_bytes += skb->len;
1610
1611 /* done with socket buffer, so free it */
1612 dev_kfree_skb(skb);
1613
1614 /* save start time for transmit timeout detection */
1615 netif_trans_update(dev);
1616
1617 /* start hardware transmitter if necessary */
1618 spin_lock_irqsave(&info->lock,flags);
1619 if (!info->tx_active)
1620 tx_start(info);
1621 spin_unlock_irqrestore(&info->lock,flags);
1622
1623 return NETDEV_TX_OK;
1624}
1625
1626/**
1627 * called by network layer when interface enabled
1628 * claim resources and initialize hardware
1629 *
1630 * dev pointer to network device structure
1631 *
1632 * returns 0 if success, otherwise error code
1633 */
1634static int hdlcdev_open(struct net_device *dev)
1635{
1636 SLMP_INFO *info = dev_to_port(dev);
1637 int rc;
1638 unsigned long flags;
1639
1640 if (debug_level >= DEBUG_LEVEL_INFO)
1641 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
1642
1643 /* generic HDLC layer open processing */
1644 rc = hdlc_open(dev);
1645 if (rc)
1646 return rc;
1647
1648 /* arbitrate between network and tty opens */
1649 spin_lock_irqsave(&info->netlock, flags);
1650 if (info->port.count != 0 || info->netcount != 0) {
1651 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
1652 spin_unlock_irqrestore(&info->netlock, flags);
1653 return -EBUSY;
1654 }
1655 info->netcount=1;
1656 spin_unlock_irqrestore(&info->netlock, flags);
1657
1658 /* claim resources and init adapter */
1659 if ((rc = startup(info)) != 0) {
1660 spin_lock_irqsave(&info->netlock, flags);
1661 info->netcount=0;
1662 spin_unlock_irqrestore(&info->netlock, flags);
1663 return rc;
1664 }
1665
1666 /* assert RTS and DTR, apply hardware settings */
1667 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
1668 program_hw(info);
1669
1670 /* enable network layer transmit */
1671 netif_trans_update(dev);
1672 netif_start_queue(dev);
1673
1674 /* inform generic HDLC layer of current DCD status */
1675 spin_lock_irqsave(&info->lock, flags);
1676 get_signals(info);
1677 spin_unlock_irqrestore(&info->lock, flags);
1678 if (info->serial_signals & SerialSignal_DCD)
1679 netif_carrier_on(dev);
1680 else
1681 netif_carrier_off(dev);
1682 return 0;
1683}
1684
1685/**
1686 * called by network layer when interface is disabled
1687 * shutdown hardware and release resources
1688 *
1689 * dev pointer to network device structure
1690 *
1691 * returns 0 if success, otherwise error code
1692 */
1693static int hdlcdev_close(struct net_device *dev)
1694{
1695 SLMP_INFO *info = dev_to_port(dev);
1696 unsigned long flags;
1697
1698 if (debug_level >= DEBUG_LEVEL_INFO)
1699 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
1700
1701 netif_stop_queue(dev);
1702
1703 /* shutdown adapter and release resources */
1704 shutdown(info);
1705
1706 hdlc_close(dev);
1707
1708 spin_lock_irqsave(&info->netlock, flags);
1709 info->netcount=0;
1710 spin_unlock_irqrestore(&info->netlock, flags);
1711
1712 return 0;
1713}
1714
1715/**
1716 * called by network layer to process IOCTL call to network device
1717 *
1718 * dev pointer to network device structure
1719 * ifr pointer to network interface request structure
1720 * cmd IOCTL command code
1721 *
1722 * returns 0 if success, otherwise error code
1723 */
1724static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1725{
1726 const size_t size = sizeof(sync_serial_settings);
1727 sync_serial_settings new_line;
1728 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1729 SLMP_INFO *info = dev_to_port(dev);
1730 unsigned int flags;
1731
1732 if (debug_level >= DEBUG_LEVEL_INFO)
1733 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
1734
1735 /* return error if TTY interface open */
1736 if (info->port.count)
1737 return -EBUSY;
1738
1739 if (cmd != SIOCWANDEV)
1740 return hdlc_ioctl(dev, ifr, cmd);
1741
1742 switch(ifr->ifr_settings.type) {
1743 case IF_GET_IFACE: /* return current sync_serial_settings */
1744
1745 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1746 if (ifr->ifr_settings.size < size) {
1747 ifr->ifr_settings.size = size; /* data size wanted */
1748 return -ENOBUFS;
1749 }
1750
1751 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1752 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1753 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1754 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1755
1756 memset(&new_line, 0, sizeof(new_line));
1757 switch (flags){
1758 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1759 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1760 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1761 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1762 default: new_line.clock_type = CLOCK_DEFAULT;
1763 }
1764
1765 new_line.clock_rate = info->params.clock_speed;
1766 new_line.loopback = info->params.loopback ? 1:0;
1767
1768 if (copy_to_user(line, &new_line, size))
1769 return -EFAULT;
1770 return 0;
1771
1772 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1773
1774 if(!capable(CAP_NET_ADMIN))
1775 return -EPERM;
1776 if (copy_from_user(&new_line, line, size))
1777 return -EFAULT;
1778
1779 switch (new_line.clock_type)
1780 {
1781 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1782 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1783 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1784 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1785 case CLOCK_DEFAULT: flags = info->params.flags &
1786 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1787 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1788 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1789 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1790 default: return -EINVAL;
1791 }
1792
1793 if (new_line.loopback != 0 && new_line.loopback != 1)
1794 return -EINVAL;
1795
1796 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1797 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1798 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1799 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1800 info->params.flags |= flags;
1801
1802 info->params.loopback = new_line.loopback;
1803
1804 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1805 info->params.clock_speed = new_line.clock_rate;
1806 else
1807 info->params.clock_speed = 0;
1808
1809 /* if network interface up, reprogram hardware */
1810 if (info->netcount)
1811 program_hw(info);
1812 return 0;
1813
1814 default:
1815 return hdlc_ioctl(dev, ifr, cmd);
1816 }
1817}
1818
1819/**
1820 * called by network layer when transmit timeout is detected
1821 *
1822 * dev pointer to network device structure
1823 */
1824static void hdlcdev_tx_timeout(struct net_device *dev)
1825{
1826 SLMP_INFO *info = dev_to_port(dev);
1827 unsigned long flags;
1828
1829 if (debug_level >= DEBUG_LEVEL_INFO)
1830 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
1831
1832 dev->stats.tx_errors++;
1833 dev->stats.tx_aborted_errors++;
1834
1835 spin_lock_irqsave(&info->lock,flags);
1836 tx_stop(info);
1837 spin_unlock_irqrestore(&info->lock,flags);
1838
1839 netif_wake_queue(dev);
1840}
1841
1842/**
1843 * called by device driver when transmit completes
1844 * reenable network layer transmit if stopped
1845 *
1846 * info pointer to device instance information
1847 */
1848static void hdlcdev_tx_done(SLMP_INFO *info)
1849{
1850 if (netif_queue_stopped(info->netdev))
1851 netif_wake_queue(info->netdev);
1852}
1853
1854/**
1855 * called by device driver when frame received
1856 * pass frame to network layer
1857 *
1858 * info pointer to device instance information
1859 * buf pointer to buffer contianing frame data
1860 * size count of data bytes in buf
1861 */
1862static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
1863{
1864 struct sk_buff *skb = dev_alloc_skb(size);
1865 struct net_device *dev = info->netdev;
1866
1867 if (debug_level >= DEBUG_LEVEL_INFO)
1868 printk("hdlcdev_rx(%s)\n",dev->name);
1869
1870 if (skb == NULL) {
1871 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
1872 dev->name);
1873 dev->stats.rx_dropped++;
1874 return;
1875 }
1876
1877 skb_put_data(skb, buf, size);
1878
1879 skb->protocol = hdlc_type_trans(skb, dev);
1880
1881 dev->stats.rx_packets++;
1882 dev->stats.rx_bytes += size;
1883
1884 netif_rx(skb);
1885}
1886
1887static const struct net_device_ops hdlcdev_ops = {
1888 .ndo_open = hdlcdev_open,
1889 .ndo_stop = hdlcdev_close,
1890 .ndo_start_xmit = hdlc_start_xmit,
1891 .ndo_do_ioctl = hdlcdev_ioctl,
1892 .ndo_tx_timeout = hdlcdev_tx_timeout,
1893};
1894
1895/**
1896 * called by device driver when adding device instance
1897 * do generic HDLC initialization
1898 *
1899 * info pointer to device instance information
1900 *
1901 * returns 0 if success, otherwise error code
1902 */
1903static int hdlcdev_init(SLMP_INFO *info)
1904{
1905 int rc;
1906 struct net_device *dev;
1907 hdlc_device *hdlc;
1908
1909 /* allocate and initialize network and HDLC layer objects */
1910
1911 dev = alloc_hdlcdev(info);
1912 if (!dev) {
1913 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
1914 return -ENOMEM;
1915 }
1916
1917 /* for network layer reporting purposes only */
1918 dev->mem_start = info->phys_sca_base;
1919 dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1;
1920 dev->irq = info->irq_level;
1921
1922 /* network layer callbacks and settings */
1923 dev->netdev_ops = &hdlcdev_ops;
1924 dev->watchdog_timeo = 10 * HZ;
1925 dev->tx_queue_len = 50;
1926
1927 /* generic HDLC layer callbacks and settings */
1928 hdlc = dev_to_hdlc(dev);
1929 hdlc->attach = hdlcdev_attach;
1930 hdlc->xmit = hdlcdev_xmit;
1931
1932 /* register objects with HDLC layer */
1933 rc = register_hdlc_device(dev);
1934 if (rc) {
1935 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1936 free_netdev(dev);
1937 return rc;
1938 }
1939
1940 info->netdev = dev;
1941 return 0;
1942}
1943
1944/**
1945 * called by device driver when removing device instance
1946 * do generic HDLC cleanup
1947 *
1948 * info pointer to device instance information
1949 */
1950static void hdlcdev_exit(SLMP_INFO *info)
1951{
1952 unregister_hdlc_device(info->netdev);
1953 free_netdev(info->netdev);
1954 info->netdev = NULL;
1955}
1956
1957#endif /* CONFIG_HDLC */
1958
1959
1960/* Return next bottom half action to perform.
1961 * Return Value: BH action code or 0 if nothing to do.
1962 */
1963static int bh_action(SLMP_INFO *info)
1964{
1965 unsigned long flags;
1966 int rc = 0;
1967
1968 spin_lock_irqsave(&info->lock,flags);
1969
1970 if (info->pending_bh & BH_RECEIVE) {
1971 info->pending_bh &= ~BH_RECEIVE;
1972 rc = BH_RECEIVE;
1973 } else if (info->pending_bh & BH_TRANSMIT) {
1974 info->pending_bh &= ~BH_TRANSMIT;
1975 rc = BH_TRANSMIT;
1976 } else if (info->pending_bh & BH_STATUS) {
1977 info->pending_bh &= ~BH_STATUS;
1978 rc = BH_STATUS;
1979 }
1980
1981 if (!rc) {
1982 /* Mark BH routine as complete */
1983 info->bh_running = false;
1984 info->bh_requested = false;
1985 }
1986
1987 spin_unlock_irqrestore(&info->lock,flags);
1988
1989 return rc;
1990}
1991
1992/* Perform bottom half processing of work items queued by ISR.
1993 */
1994static void bh_handler(struct work_struct *work)
1995{
1996 SLMP_INFO *info = container_of(work, SLMP_INFO, task);
1997 int action;
1998
1999 if ( debug_level >= DEBUG_LEVEL_BH )
2000 printk( "%s(%d):%s bh_handler() entry\n",
2001 __FILE__,__LINE__,info->device_name);
2002
2003 info->bh_running = true;
2004
2005 while((action = bh_action(info)) != 0) {
2006
2007 /* Process work item */
2008 if ( debug_level >= DEBUG_LEVEL_BH )
2009 printk( "%s(%d):%s bh_handler() work item action=%d\n",
2010 __FILE__,__LINE__,info->device_name, action);
2011
2012 switch (action) {
2013
2014 case BH_RECEIVE:
2015 bh_receive(info);
2016 break;
2017 case BH_TRANSMIT:
2018 bh_transmit(info);
2019 break;
2020 case BH_STATUS:
2021 bh_status(info);
2022 break;
2023 default:
2024 /* unknown work item ID */
2025 printk("%s(%d):%s Unknown work item ID=%08X!\n",
2026 __FILE__,__LINE__,info->device_name,action);
2027 break;
2028 }
2029 }
2030
2031 if ( debug_level >= DEBUG_LEVEL_BH )
2032 printk( "%s(%d):%s bh_handler() exit\n",
2033 __FILE__,__LINE__,info->device_name);
2034}
2035
2036static void bh_receive(SLMP_INFO *info)
2037{
2038 if ( debug_level >= DEBUG_LEVEL_BH )
2039 printk( "%s(%d):%s bh_receive()\n",
2040 __FILE__,__LINE__,info->device_name);
2041
2042 while( rx_get_frame(info) );
2043}
2044
2045static void bh_transmit(SLMP_INFO *info)
2046{
2047 struct tty_struct *tty = info->port.tty;
2048
2049 if ( debug_level >= DEBUG_LEVEL_BH )
2050 printk( "%s(%d):%s bh_transmit() entry\n",
2051 __FILE__,__LINE__,info->device_name);
2052
2053 if (tty)
2054 tty_wakeup(tty);
2055}
2056
2057static void bh_status(SLMP_INFO *info)
2058{
2059 if ( debug_level >= DEBUG_LEVEL_BH )
2060 printk( "%s(%d):%s bh_status() entry\n",
2061 __FILE__,__LINE__,info->device_name);
2062
2063 info->ri_chkcount = 0;
2064 info->dsr_chkcount = 0;
2065 info->dcd_chkcount = 0;
2066 info->cts_chkcount = 0;
2067}
2068
2069static void isr_timer(SLMP_INFO * info)
2070{
2071 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
2072
2073 /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
2074 write_reg(info, IER2, 0);
2075
2076 /* TMCS, Timer Control/Status Register
2077 *
2078 * 07 CMF, Compare match flag (read only) 1=match
2079 * 06 ECMI, CMF Interrupt Enable: 0=disabled
2080 * 05 Reserved, must be 0
2081 * 04 TME, Timer Enable
2082 * 03..00 Reserved, must be 0
2083 *
2084 * 0000 0000
2085 */
2086 write_reg(info, (unsigned char)(timer + TMCS), 0);
2087
2088 info->irq_occurred = true;
2089
2090 if ( debug_level >= DEBUG_LEVEL_ISR )
2091 printk("%s(%d):%s isr_timer()\n",
2092 __FILE__,__LINE__,info->device_name);
2093}
2094
2095static void isr_rxint(SLMP_INFO * info)
2096{
2097 struct tty_struct *tty = info->port.tty;
2098 struct mgsl_icount *icount = &info->icount;
2099 unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
2100 unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
2101
2102 /* clear status bits */
2103 if (status)
2104 write_reg(info, SR1, status);
2105
2106 if (status2)
2107 write_reg(info, SR2, status2);
2108
2109 if ( debug_level >= DEBUG_LEVEL_ISR )
2110 printk("%s(%d):%s isr_rxint status=%02X %02x\n",
2111 __FILE__,__LINE__,info->device_name,status,status2);
2112
2113 if (info->params.mode == MGSL_MODE_ASYNC) {
2114 if (status & BRKD) {
2115 icount->brk++;
2116
2117 /* process break detection if tty control
2118 * is not set to ignore it
2119 */
2120 if (!(status & info->ignore_status_mask1)) {
2121 if (info->read_status_mask1 & BRKD) {
2122 tty_insert_flip_char(&info->port, 0, TTY_BREAK);
2123 if (tty && (info->port.flags & ASYNC_SAK))
2124 do_SAK(tty);
2125 }
2126 }
2127 }
2128 }
2129 else {
2130 if (status & (FLGD|IDLD)) {
2131 if (status & FLGD)
2132 info->icount.exithunt++;
2133 else if (status & IDLD)
2134 info->icount.rxidle++;
2135 wake_up_interruptible(&info->event_wait_q);
2136 }
2137 }
2138
2139 if (status & CDCD) {
2140 /* simulate a common modem status change interrupt
2141 * for our handler
2142 */
2143 get_signals( info );
2144 isr_io_pin(info,
2145 MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
2146 }
2147}
2148
2149/*
2150 * handle async rx data interrupts
2151 */
2152static void isr_rxrdy(SLMP_INFO * info)
2153{
2154 u16 status;
2155 unsigned char DataByte;
2156 struct mgsl_icount *icount = &info->icount;
2157
2158 if ( debug_level >= DEBUG_LEVEL_ISR )
2159 printk("%s(%d):%s isr_rxrdy\n",
2160 __FILE__,__LINE__,info->device_name);
2161
2162 while((status = read_reg(info,CST0)) & BIT0)
2163 {
2164 int flag = 0;
2165 bool over = false;
2166 DataByte = read_reg(info,TRB);
2167
2168 icount->rx++;
2169
2170 if ( status & (PE + FRME + OVRN) ) {
2171 printk("%s(%d):%s rxerr=%04X\n",
2172 __FILE__,__LINE__,info->device_name,status);
2173
2174 /* update error statistics */
2175 if (status & PE)
2176 icount->parity++;
2177 else if (status & FRME)
2178 icount->frame++;
2179 else if (status & OVRN)
2180 icount->overrun++;
2181
2182 /* discard char if tty control flags say so */
2183 if (status & info->ignore_status_mask2)
2184 continue;
2185
2186 status &= info->read_status_mask2;
2187
2188 if (status & PE)
2189 flag = TTY_PARITY;
2190 else if (status & FRME)
2191 flag = TTY_FRAME;
2192 if (status & OVRN) {
2193 /* Overrun is special, since it's
2194 * reported immediately, and doesn't
2195 * affect the current character
2196 */
2197 over = true;
2198 }
2199 } /* end of if (error) */
2200
2201 tty_insert_flip_char(&info->port, DataByte, flag);
2202 if (over)
2203 tty_insert_flip_char(&info->port, 0, TTY_OVERRUN);
2204 }
2205
2206 if ( debug_level >= DEBUG_LEVEL_ISR ) {
2207 printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
2208 __FILE__,__LINE__,info->device_name,
2209 icount->rx,icount->brk,icount->parity,
2210 icount->frame,icount->overrun);
2211 }
2212
2213 tty_flip_buffer_push(&info->port);
2214}
2215
2216static void isr_txeom(SLMP_INFO * info, unsigned char status)
2217{
2218 if ( debug_level >= DEBUG_LEVEL_ISR )
2219 printk("%s(%d):%s isr_txeom status=%02x\n",
2220 __FILE__,__LINE__,info->device_name,status);
2221
2222 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2223 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2224 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2225
2226 if (status & UDRN) {
2227 write_reg(info, CMD, TXRESET);
2228 write_reg(info, CMD, TXENABLE);
2229 } else
2230 write_reg(info, CMD, TXBUFCLR);
2231
2232 /* disable and clear tx interrupts */
2233 info->ie0_value &= ~TXRDYE;
2234 info->ie1_value &= ~(IDLE + UDRN);
2235 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2236 write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
2237
2238 if ( info->tx_active ) {
2239 if (info->params.mode != MGSL_MODE_ASYNC) {
2240 if (status & UDRN)
2241 info->icount.txunder++;
2242 else if (status & IDLE)
2243 info->icount.txok++;
2244 }
2245
2246 info->tx_active = false;
2247 info->tx_count = info->tx_put = info->tx_get = 0;
2248
2249 del_timer(&info->tx_timer);
2250
2251 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
2252 info->serial_signals &= ~SerialSignal_RTS;
2253 info->drop_rts_on_tx_done = false;
2254 set_signals(info);
2255 }
2256
2257#if SYNCLINK_GENERIC_HDLC
2258 if (info->netcount)
2259 hdlcdev_tx_done(info);
2260 else
2261#endif
2262 {
2263 if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2264 tx_stop(info);
2265 return;
2266 }
2267 info->pending_bh |= BH_TRANSMIT;
2268 }
2269 }
2270}
2271
2272
2273/*
2274 * handle tx status interrupts
2275 */
2276static void isr_txint(SLMP_INFO * info)
2277{
2278 unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
2279
2280 /* clear status bits */
2281 write_reg(info, SR1, status);
2282
2283 if ( debug_level >= DEBUG_LEVEL_ISR )
2284 printk("%s(%d):%s isr_txint status=%02x\n",
2285 __FILE__,__LINE__,info->device_name,status);
2286
2287 if (status & (UDRN + IDLE))
2288 isr_txeom(info, status);
2289
2290 if (status & CCTS) {
2291 /* simulate a common modem status change interrupt
2292 * for our handler
2293 */
2294 get_signals( info );
2295 isr_io_pin(info,
2296 MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
2297
2298 }
2299}
2300
2301/*
2302 * handle async tx data interrupts
2303 */
2304static void isr_txrdy(SLMP_INFO * info)
2305{
2306 if ( debug_level >= DEBUG_LEVEL_ISR )
2307 printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
2308 __FILE__,__LINE__,info->device_name,info->tx_count);
2309
2310 if (info->params.mode != MGSL_MODE_ASYNC) {
2311 /* disable TXRDY IRQ, enable IDLE IRQ */
2312 info->ie0_value &= ~TXRDYE;
2313 info->ie1_value |= IDLE;
2314 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2315 return;
2316 }
2317
2318 if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2319 tx_stop(info);
2320 return;
2321 }
2322
2323 if ( info->tx_count )
2324 tx_load_fifo( info );
2325 else {
2326 info->tx_active = false;
2327 info->ie0_value &= ~TXRDYE;
2328 write_reg(info, IE0, info->ie0_value);
2329 }
2330
2331 if (info->tx_count < WAKEUP_CHARS)
2332 info->pending_bh |= BH_TRANSMIT;
2333}
2334
2335static void isr_rxdmaok(SLMP_INFO * info)
2336{
2337 /* BIT7 = EOT (end of transfer)
2338 * BIT6 = EOM (end of message/frame)
2339 */
2340 unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
2341
2342 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2343 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2344
2345 if ( debug_level >= DEBUG_LEVEL_ISR )
2346 printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
2347 __FILE__,__LINE__,info->device_name,status);
2348
2349 info->pending_bh |= BH_RECEIVE;
2350}
2351
2352static void isr_rxdmaerror(SLMP_INFO * info)
2353{
2354 /* BIT5 = BOF (buffer overflow)
2355 * BIT4 = COF (counter overflow)
2356 */
2357 unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
2358
2359 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2360 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2361
2362 if ( debug_level >= DEBUG_LEVEL_ISR )
2363 printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
2364 __FILE__,__LINE__,info->device_name,status);
2365
2366 info->rx_overflow = true;
2367 info->pending_bh |= BH_RECEIVE;
2368}
2369
2370static void isr_txdmaok(SLMP_INFO * info)
2371{
2372 unsigned char status_reg1 = read_reg(info, SR1);
2373
2374 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2375 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2376 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2377
2378 if ( debug_level >= DEBUG_LEVEL_ISR )
2379 printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
2380 __FILE__,__LINE__,info->device_name,status_reg1);
2381
2382 /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
2383 write_reg16(info, TRC0, 0);
2384 info->ie0_value |= TXRDYE;
2385 write_reg(info, IE0, info->ie0_value);
2386}
2387
2388static void isr_txdmaerror(SLMP_INFO * info)
2389{
2390 /* BIT5 = BOF (buffer overflow)
2391 * BIT4 = COF (counter overflow)
2392 */
2393 unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
2394
2395 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2396 write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
2397
2398 if ( debug_level >= DEBUG_LEVEL_ISR )
2399 printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
2400 __FILE__,__LINE__,info->device_name,status);
2401}
2402
2403/* handle input serial signal changes
2404 */
2405static void isr_io_pin( SLMP_INFO *info, u16 status )
2406{
2407 struct mgsl_icount *icount;
2408
2409 if ( debug_level >= DEBUG_LEVEL_ISR )
2410 printk("%s(%d):isr_io_pin status=%04X\n",
2411 __FILE__,__LINE__,status);
2412
2413 if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
2414 MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
2415 icount = &info->icount;
2416 /* update input line counters */
2417 if (status & MISCSTATUS_RI_LATCHED) {
2418 icount->rng++;
2419 if ( status & SerialSignal_RI )
2420 info->input_signal_events.ri_up++;
2421 else
2422 info->input_signal_events.ri_down++;
2423 }
2424 if (status & MISCSTATUS_DSR_LATCHED) {
2425 icount->dsr++;
2426 if ( status & SerialSignal_DSR )
2427 info->input_signal_events.dsr_up++;
2428 else
2429 info->input_signal_events.dsr_down++;
2430 }
2431 if (status & MISCSTATUS_DCD_LATCHED) {
2432 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2433 info->ie1_value &= ~CDCD;
2434 write_reg(info, IE1, info->ie1_value);
2435 }
2436 icount->dcd++;
2437 if (status & SerialSignal_DCD) {
2438 info->input_signal_events.dcd_up++;
2439 } else
2440 info->input_signal_events.dcd_down++;
2441#if SYNCLINK_GENERIC_HDLC
2442 if (info->netcount) {
2443 if (status & SerialSignal_DCD)
2444 netif_carrier_on(info->netdev);
2445 else
2446 netif_carrier_off(info->netdev);
2447 }
2448#endif
2449 }
2450 if (status & MISCSTATUS_CTS_LATCHED)
2451 {
2452 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2453 info->ie1_value &= ~CCTS;
2454 write_reg(info, IE1, info->ie1_value);
2455 }
2456 icount->cts++;
2457 if ( status & SerialSignal_CTS )
2458 info->input_signal_events.cts_up++;
2459 else
2460 info->input_signal_events.cts_down++;
2461 }
2462 wake_up_interruptible(&info->status_event_wait_q);
2463 wake_up_interruptible(&info->event_wait_q);
2464
2465 if (tty_port_check_carrier(&info->port) &&
2466 (status & MISCSTATUS_DCD_LATCHED) ) {
2467 if ( debug_level >= DEBUG_LEVEL_ISR )
2468 printk("%s CD now %s...", info->device_name,
2469 (status & SerialSignal_DCD) ? "on" : "off");
2470 if (status & SerialSignal_DCD)
2471 wake_up_interruptible(&info->port.open_wait);
2472 else {
2473 if ( debug_level >= DEBUG_LEVEL_ISR )
2474 printk("doing serial hangup...");
2475 if (info->port.tty)
2476 tty_hangup(info->port.tty);
2477 }
2478 }
2479
2480 if (tty_port_cts_enabled(&info->port) &&
2481 (status & MISCSTATUS_CTS_LATCHED) ) {
2482 if ( info->port.tty ) {
2483 if (info->port.tty->hw_stopped) {
2484 if (status & SerialSignal_CTS) {
2485 if ( debug_level >= DEBUG_LEVEL_ISR )
2486 printk("CTS tx start...");
2487 info->port.tty->hw_stopped = 0;
2488 tx_start(info);
2489 info->pending_bh |= BH_TRANSMIT;
2490 return;
2491 }
2492 } else {
2493 if (!(status & SerialSignal_CTS)) {
2494 if ( debug_level >= DEBUG_LEVEL_ISR )
2495 printk("CTS tx stop...");
2496 info->port.tty->hw_stopped = 1;
2497 tx_stop(info);
2498 }
2499 }
2500 }
2501 }
2502 }
2503
2504 info->pending_bh |= BH_STATUS;
2505}
2506
2507/* Interrupt service routine entry point.
2508 *
2509 * Arguments:
2510 * irq interrupt number that caused interrupt
2511 * dev_id device ID supplied during interrupt registration
2512 * regs interrupted processor context
2513 */
2514static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id)
2515{
2516 SLMP_INFO *info = dev_id;
2517 unsigned char status, status0, status1=0;
2518 unsigned char dmastatus, dmastatus0, dmastatus1=0;
2519 unsigned char timerstatus0, timerstatus1=0;
2520 unsigned char shift;
2521 unsigned int i;
2522 unsigned short tmp;
2523
2524 if ( debug_level >= DEBUG_LEVEL_ISR )
2525 printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n",
2526 __FILE__, __LINE__, info->irq_level);
2527
2528 spin_lock(&info->lock);
2529
2530 for(;;) {
2531
2532 /* get status for SCA0 (ports 0-1) */
2533 tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */
2534 status0 = (unsigned char)tmp;
2535 dmastatus0 = (unsigned char)(tmp>>8);
2536 timerstatus0 = read_reg(info, ISR2);
2537
2538 if ( debug_level >= DEBUG_LEVEL_ISR )
2539 printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
2540 __FILE__, __LINE__, info->device_name,
2541 status0, dmastatus0, timerstatus0);
2542
2543 if (info->port_count == 4) {
2544 /* get status for SCA1 (ports 2-3) */
2545 tmp = read_reg16(info->port_array[2], ISR0);
2546 status1 = (unsigned char)tmp;
2547 dmastatus1 = (unsigned char)(tmp>>8);
2548 timerstatus1 = read_reg(info->port_array[2], ISR2);
2549
2550 if ( debug_level >= DEBUG_LEVEL_ISR )
2551 printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
2552 __FILE__,__LINE__,info->device_name,
2553 status1,dmastatus1,timerstatus1);
2554 }
2555
2556 if (!status0 && !dmastatus0 && !timerstatus0 &&
2557 !status1 && !dmastatus1 && !timerstatus1)
2558 break;
2559
2560 for(i=0; i < info->port_count ; i++) {
2561 if (info->port_array[i] == NULL)
2562 continue;
2563 if (i < 2) {
2564 status = status0;
2565 dmastatus = dmastatus0;
2566 } else {
2567 status = status1;
2568 dmastatus = dmastatus1;
2569 }
2570
2571 shift = i & 1 ? 4 :0;
2572
2573 if (status & BIT0 << shift)
2574 isr_rxrdy(info->port_array[i]);
2575 if (status & BIT1 << shift)
2576 isr_txrdy(info->port_array[i]);
2577 if (status & BIT2 << shift)
2578 isr_rxint(info->port_array[i]);
2579 if (status & BIT3 << shift)
2580 isr_txint(info->port_array[i]);
2581
2582 if (dmastatus & BIT0 << shift)
2583 isr_rxdmaerror(info->port_array[i]);
2584 if (dmastatus & BIT1 << shift)
2585 isr_rxdmaok(info->port_array[i]);
2586 if (dmastatus & BIT2 << shift)
2587 isr_txdmaerror(info->port_array[i]);
2588 if (dmastatus & BIT3 << shift)
2589 isr_txdmaok(info->port_array[i]);
2590 }
2591
2592 if (timerstatus0 & (BIT5 | BIT4))
2593 isr_timer(info->port_array[0]);
2594 if (timerstatus0 & (BIT7 | BIT6))
2595 isr_timer(info->port_array[1]);
2596 if (timerstatus1 & (BIT5 | BIT4))
2597 isr_timer(info->port_array[2]);
2598 if (timerstatus1 & (BIT7 | BIT6))
2599 isr_timer(info->port_array[3]);
2600 }
2601
2602 for(i=0; i < info->port_count ; i++) {
2603 SLMP_INFO * port = info->port_array[i];
2604
2605 /* Request bottom half processing if there's something
2606 * for it to do and the bh is not already running.
2607 *
2608 * Note: startup adapter diags require interrupts.
2609 * do not request bottom half processing if the
2610 * device is not open in a normal mode.
2611 */
2612 if ( port && (port->port.count || port->netcount) &&
2613 port->pending_bh && !port->bh_running &&
2614 !port->bh_requested ) {
2615 if ( debug_level >= DEBUG_LEVEL_ISR )
2616 printk("%s(%d):%s queueing bh task.\n",
2617 __FILE__,__LINE__,port->device_name);
2618 schedule_work(&port->task);
2619 port->bh_requested = true;
2620 }
2621 }
2622
2623 spin_unlock(&info->lock);
2624
2625 if ( debug_level >= DEBUG_LEVEL_ISR )
2626 printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n",
2627 __FILE__, __LINE__, info->irq_level);
2628 return IRQ_HANDLED;
2629}
2630
2631/* Initialize and start device.
2632 */
2633static int startup(SLMP_INFO * info)
2634{
2635 if ( debug_level >= DEBUG_LEVEL_INFO )
2636 printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
2637
2638 if (tty_port_initialized(&info->port))
2639 return 0;
2640
2641 if (!info->tx_buf) {
2642 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2643 if (!info->tx_buf) {
2644 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
2645 __FILE__,__LINE__,info->device_name);
2646 return -ENOMEM;
2647 }
2648 }
2649
2650 info->pending_bh = 0;
2651
2652 memset(&info->icount, 0, sizeof(info->icount));
2653
2654 /* program hardware for current parameters */
2655 reset_port(info);
2656
2657 change_params(info);
2658
2659 mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
2660
2661 if (info->port.tty)
2662 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2663
2664 tty_port_set_initialized(&info->port, 1);
2665
2666 return 0;
2667}
2668
2669/* Called by close() and hangup() to shutdown hardware
2670 */
2671static void shutdown(SLMP_INFO * info)
2672{
2673 unsigned long flags;
2674
2675 if (!tty_port_initialized(&info->port))
2676 return;
2677
2678 if (debug_level >= DEBUG_LEVEL_INFO)
2679 printk("%s(%d):%s synclinkmp_shutdown()\n",
2680 __FILE__,__LINE__, info->device_name );
2681
2682 /* clear status wait queue because status changes */
2683 /* can't happen after shutting down the hardware */
2684 wake_up_interruptible(&info->status_event_wait_q);
2685 wake_up_interruptible(&info->event_wait_q);
2686
2687 del_timer(&info->tx_timer);
2688 del_timer(&info->status_timer);
2689
2690 kfree(info->tx_buf);
2691 info->tx_buf = NULL;
2692
2693 spin_lock_irqsave(&info->lock,flags);
2694
2695 reset_port(info);
2696
2697 if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
2698 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
2699 set_signals(info);
2700 }
2701
2702 spin_unlock_irqrestore(&info->lock,flags);
2703
2704 if (info->port.tty)
2705 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2706
2707 tty_port_set_initialized(&info->port, 0);
2708}
2709
2710static void program_hw(SLMP_INFO *info)
2711{
2712 unsigned long flags;
2713
2714 spin_lock_irqsave(&info->lock,flags);
2715
2716 rx_stop(info);
2717 tx_stop(info);
2718
2719 info->tx_count = info->tx_put = info->tx_get = 0;
2720
2721 if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
2722 hdlc_mode(info);
2723 else
2724 async_mode(info);
2725
2726 set_signals(info);
2727
2728 info->dcd_chkcount = 0;
2729 info->cts_chkcount = 0;
2730 info->ri_chkcount = 0;
2731 info->dsr_chkcount = 0;
2732
2733 info->ie1_value |= (CDCD|CCTS);
2734 write_reg(info, IE1, info->ie1_value);
2735
2736 get_signals(info);
2737
2738 if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) )
2739 rx_start(info);
2740
2741 spin_unlock_irqrestore(&info->lock,flags);
2742}
2743
2744/* Reconfigure adapter based on new parameters
2745 */
2746static void change_params(SLMP_INFO *info)
2747{
2748 unsigned cflag;
2749 int bits_per_char;
2750
2751 if (!info->port.tty)
2752 return;
2753
2754 if (debug_level >= DEBUG_LEVEL_INFO)
2755 printk("%s(%d):%s change_params()\n",
2756 __FILE__,__LINE__, info->device_name );
2757
2758 cflag = info->port.tty->termios.c_cflag;
2759
2760 /* if B0 rate (hangup) specified then negate RTS and DTR */
2761 /* otherwise assert RTS and DTR */
2762 if (cflag & CBAUD)
2763 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
2764 else
2765 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
2766
2767 /* byte size and parity */
2768
2769 switch (cflag & CSIZE) {
2770 case CS5: info->params.data_bits = 5; break;
2771 case CS6: info->params.data_bits = 6; break;
2772 case CS7: info->params.data_bits = 7; break;
2773 case CS8: info->params.data_bits = 8; break;
2774 /* Never happens, but GCC is too dumb to figure it out */
2775 default: info->params.data_bits = 7; break;
2776 }
2777
2778 if (cflag & CSTOPB)
2779 info->params.stop_bits = 2;
2780 else
2781 info->params.stop_bits = 1;
2782
2783 info->params.parity = ASYNC_PARITY_NONE;
2784 if (cflag & PARENB) {
2785 if (cflag & PARODD)
2786 info->params.parity = ASYNC_PARITY_ODD;
2787 else
2788 info->params.parity = ASYNC_PARITY_EVEN;
2789#ifdef CMSPAR
2790 if (cflag & CMSPAR)
2791 info->params.parity = ASYNC_PARITY_SPACE;
2792#endif
2793 }
2794
2795 /* calculate number of jiffies to transmit a full
2796 * FIFO (32 bytes) at specified data rate
2797 */
2798 bits_per_char = info->params.data_bits +
2799 info->params.stop_bits + 1;
2800
2801 /* if port data rate is set to 460800 or less then
2802 * allow tty settings to override, otherwise keep the
2803 * current data rate.
2804 */
2805 if (info->params.data_rate <= 460800) {
2806 info->params.data_rate = tty_get_baud_rate(info->port.tty);
2807 }
2808
2809 if ( info->params.data_rate ) {
2810 info->timeout = (32*HZ*bits_per_char) /
2811 info->params.data_rate;
2812 }
2813 info->timeout += HZ/50; /* Add .02 seconds of slop */
2814
2815 tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
2816 tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);
2817
2818 /* process tty input control flags */
2819
2820 info->read_status_mask2 = OVRN;
2821 if (I_INPCK(info->port.tty))
2822 info->read_status_mask2 |= PE | FRME;
2823 if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2824 info->read_status_mask1 |= BRKD;
2825 if (I_IGNPAR(info->port.tty))
2826 info->ignore_status_mask2 |= PE | FRME;
2827 if (I_IGNBRK(info->port.tty)) {
2828 info->ignore_status_mask1 |= BRKD;
2829 /* If ignoring parity and break indicators, ignore
2830 * overruns too. (For real raw support).
2831 */
2832 if (I_IGNPAR(info->port.tty))
2833 info->ignore_status_mask2 |= OVRN;
2834 }
2835
2836 program_hw(info);
2837}
2838
2839static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
2840{
2841 int err;
2842
2843 if (debug_level >= DEBUG_LEVEL_INFO)
2844 printk("%s(%d):%s get_params()\n",
2845 __FILE__,__LINE__, info->device_name);
2846
2847 if (!user_icount) {
2848 memset(&info->icount, 0, sizeof(info->icount));
2849 } else {
2850 mutex_lock(&info->port.mutex);
2851 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2852 mutex_unlock(&info->port.mutex);
2853 if (err)
2854 return -EFAULT;
2855 }
2856
2857 return 0;
2858}
2859
2860static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
2861{
2862 int err;
2863 if (debug_level >= DEBUG_LEVEL_INFO)
2864 printk("%s(%d):%s get_params()\n",
2865 __FILE__,__LINE__, info->device_name);
2866
2867 mutex_lock(&info->port.mutex);
2868 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2869 mutex_unlock(&info->port.mutex);
2870 if (err) {
2871 if ( debug_level >= DEBUG_LEVEL_INFO )
2872 printk( "%s(%d):%s get_params() user buffer copy failed\n",
2873 __FILE__,__LINE__,info->device_name);
2874 return -EFAULT;
2875 }
2876
2877 return 0;
2878}
2879
2880static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
2881{
2882 unsigned long flags;
2883 MGSL_PARAMS tmp_params;
2884 int err;
2885
2886 if (debug_level >= DEBUG_LEVEL_INFO)
2887 printk("%s(%d):%s set_params\n",
2888 __FILE__,__LINE__,info->device_name );
2889 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2890 if (err) {
2891 if ( debug_level >= DEBUG_LEVEL_INFO )
2892 printk( "%s(%d):%s set_params() user buffer copy failed\n",
2893 __FILE__,__LINE__,info->device_name);
2894 return -EFAULT;
2895 }
2896
2897 mutex_lock(&info->port.mutex);
2898 spin_lock_irqsave(&info->lock,flags);
2899 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2900 spin_unlock_irqrestore(&info->lock,flags);
2901
2902 change_params(info);
2903 mutex_unlock(&info->port.mutex);
2904
2905 return 0;
2906}
2907
2908static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
2909{
2910 int err;
2911
2912 if (debug_level >= DEBUG_LEVEL_INFO)
2913 printk("%s(%d):%s get_txidle()=%d\n",
2914 __FILE__,__LINE__, info->device_name, info->idle_mode);
2915
2916 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2917 if (err) {
2918 if ( debug_level >= DEBUG_LEVEL_INFO )
2919 printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
2920 __FILE__,__LINE__,info->device_name);
2921 return -EFAULT;
2922 }
2923
2924 return 0;
2925}
2926
2927static int set_txidle(SLMP_INFO * info, int idle_mode)
2928{
2929 unsigned long flags;
2930
2931 if (debug_level >= DEBUG_LEVEL_INFO)
2932 printk("%s(%d):%s set_txidle(%d)\n",
2933 __FILE__,__LINE__,info->device_name, idle_mode );
2934
2935 spin_lock_irqsave(&info->lock,flags);
2936 info->idle_mode = idle_mode;
2937 tx_set_idle( info );
2938 spin_unlock_irqrestore(&info->lock,flags);
2939 return 0;
2940}
2941
2942static int tx_enable(SLMP_INFO * info, int enable)
2943{
2944 unsigned long flags;
2945
2946 if (debug_level >= DEBUG_LEVEL_INFO)
2947 printk("%s(%d):%s tx_enable(%d)\n",
2948 __FILE__,__LINE__,info->device_name, enable);
2949
2950 spin_lock_irqsave(&info->lock,flags);
2951 if ( enable ) {
2952 if ( !info->tx_enabled ) {
2953 tx_start(info);
2954 }
2955 } else {
2956 if ( info->tx_enabled )
2957 tx_stop(info);
2958 }
2959 spin_unlock_irqrestore(&info->lock,flags);
2960 return 0;
2961}
2962
2963/* abort send HDLC frame
2964 */
2965static int tx_abort(SLMP_INFO * info)
2966{
2967 unsigned long flags;
2968
2969 if (debug_level >= DEBUG_LEVEL_INFO)
2970 printk("%s(%d):%s tx_abort()\n",
2971 __FILE__,__LINE__,info->device_name);
2972
2973 spin_lock_irqsave(&info->lock,flags);
2974 if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
2975 info->ie1_value &= ~UDRN;
2976 info->ie1_value |= IDLE;
2977 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
2978 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
2979
2980 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
2981 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2982
2983 write_reg(info, CMD, TXABORT);
2984 }
2985 spin_unlock_irqrestore(&info->lock,flags);
2986 return 0;
2987}
2988
2989static int rx_enable(SLMP_INFO * info, int enable)
2990{
2991 unsigned long flags;
2992
2993 if (debug_level >= DEBUG_LEVEL_INFO)
2994 printk("%s(%d):%s rx_enable(%d)\n",
2995 __FILE__,__LINE__,info->device_name,enable);
2996
2997 spin_lock_irqsave(&info->lock,flags);
2998 if ( enable ) {
2999 if ( !info->rx_enabled )
3000 rx_start(info);
3001 } else {
3002 if ( info->rx_enabled )
3003 rx_stop(info);
3004 }
3005 spin_unlock_irqrestore(&info->lock,flags);
3006 return 0;
3007}
3008
3009/* wait for specified event to occur
3010 */
3011static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
3012{
3013 unsigned long flags;
3014 int s;
3015 int rc=0;
3016 struct mgsl_icount cprev, cnow;
3017 int events;
3018 int mask;
3019 struct _input_signal_events oldsigs, newsigs;
3020 DECLARE_WAITQUEUE(wait, current);
3021
3022 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
3023 if (rc) {
3024 return -EFAULT;
3025 }
3026
3027 if (debug_level >= DEBUG_LEVEL_INFO)
3028 printk("%s(%d):%s wait_mgsl_event(%d)\n",
3029 __FILE__,__LINE__,info->device_name,mask);
3030
3031 spin_lock_irqsave(&info->lock,flags);
3032
3033 /* return immediately if state matches requested events */
3034 get_signals(info);
3035 s = info->serial_signals;
3036
3037 events = mask &
3038 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
3039 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
3040 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
3041 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
3042 if (events) {
3043 spin_unlock_irqrestore(&info->lock,flags);
3044 goto exit;
3045 }
3046
3047 /* save current irq counts */
3048 cprev = info->icount;
3049 oldsigs = info->input_signal_events;
3050
3051 /* enable hunt and idle irqs if needed */
3052 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
3053 unsigned char oldval = info->ie1_value;
3054 unsigned char newval = oldval +
3055 (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
3056 (mask & MgslEvent_IdleReceived ? IDLD:0);
3057 if ( oldval != newval ) {
3058 info->ie1_value = newval;
3059 write_reg(info, IE1, info->ie1_value);
3060 }
3061 }
3062
3063 set_current_state(TASK_INTERRUPTIBLE);
3064 add_wait_queue(&info->event_wait_q, &wait);
3065
3066 spin_unlock_irqrestore(&info->lock,flags);
3067
3068 for(;;) {
3069 schedule();
3070 if (signal_pending(current)) {
3071 rc = -ERESTARTSYS;
3072 break;
3073 }
3074
3075 /* get current irq counts */
3076 spin_lock_irqsave(&info->lock,flags);
3077 cnow = info->icount;
3078 newsigs = info->input_signal_events;
3079 set_current_state(TASK_INTERRUPTIBLE);
3080 spin_unlock_irqrestore(&info->lock,flags);
3081
3082 /* if no change, wait aborted for some reason */
3083 if (newsigs.dsr_up == oldsigs.dsr_up &&
3084 newsigs.dsr_down == oldsigs.dsr_down &&
3085 newsigs.dcd_up == oldsigs.dcd_up &&
3086 newsigs.dcd_down == oldsigs.dcd_down &&
3087 newsigs.cts_up == oldsigs.cts_up &&
3088 newsigs.cts_down == oldsigs.cts_down &&
3089 newsigs.ri_up == oldsigs.ri_up &&
3090 newsigs.ri_down == oldsigs.ri_down &&
3091 cnow.exithunt == cprev.exithunt &&
3092 cnow.rxidle == cprev.rxidle) {
3093 rc = -EIO;
3094 break;
3095 }
3096
3097 events = mask &
3098 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
3099 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
3100 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
3101 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
3102 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
3103 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
3104 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
3105 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
3106 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
3107 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
3108 if (events)
3109 break;
3110
3111 cprev = cnow;
3112 oldsigs = newsigs;
3113 }
3114
3115 remove_wait_queue(&info->event_wait_q, &wait);
3116 set_current_state(TASK_RUNNING);
3117
3118
3119 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
3120 spin_lock_irqsave(&info->lock,flags);
3121 if (!waitqueue_active(&info->event_wait_q)) {
3122 /* disable enable exit hunt mode/idle rcvd IRQs */
3123 info->ie1_value &= ~(FLGD|IDLD);
3124 write_reg(info, IE1, info->ie1_value);
3125 }
3126 spin_unlock_irqrestore(&info->lock,flags);
3127 }
3128exit:
3129 if ( rc == 0 )
3130 PUT_USER(rc, events, mask_ptr);
3131
3132 return rc;
3133}
3134
3135static int modem_input_wait(SLMP_INFO *info,int arg)
3136{
3137 unsigned long flags;
3138 int rc;
3139 struct mgsl_icount cprev, cnow;
3140 DECLARE_WAITQUEUE(wait, current);
3141
3142 /* save current irq counts */
3143 spin_lock_irqsave(&info->lock,flags);
3144 cprev = info->icount;
3145 add_wait_queue(&info->status_event_wait_q, &wait);
3146 set_current_state(TASK_INTERRUPTIBLE);
3147 spin_unlock_irqrestore(&info->lock,flags);
3148
3149 for(;;) {
3150 schedule();
3151 if (signal_pending(current)) {
3152 rc = -ERESTARTSYS;
3153 break;
3154 }
3155
3156 /* get new irq counts */
3157 spin_lock_irqsave(&info->lock,flags);
3158 cnow = info->icount;
3159 set_current_state(TASK_INTERRUPTIBLE);
3160 spin_unlock_irqrestore(&info->lock,flags);
3161
3162 /* if no change, wait aborted for some reason */
3163 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3164 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3165 rc = -EIO;
3166 break;
3167 }
3168
3169 /* check for change in caller specified modem input */
3170 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3171 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3172 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
3173 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3174 rc = 0;
3175 break;
3176 }
3177
3178 cprev = cnow;
3179 }
3180 remove_wait_queue(&info->status_event_wait_q, &wait);
3181 set_current_state(TASK_RUNNING);
3182 return rc;
3183}
3184
3185/* return the state of the serial control and status signals
3186 */
3187static int tiocmget(struct tty_struct *tty)
3188{
3189 SLMP_INFO *info = tty->driver_data;
3190 unsigned int result;
3191 unsigned long flags;
3192
3193 spin_lock_irqsave(&info->lock,flags);
3194 get_signals(info);
3195 spin_unlock_irqrestore(&info->lock,flags);
3196
3197 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) |
3198 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR : 0) |
3199 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR : 0) |
3200 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG : 0) |
3201 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR : 0) |
3202 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS : 0);
3203
3204 if (debug_level >= DEBUG_LEVEL_INFO)
3205 printk("%s(%d):%s tiocmget() value=%08X\n",
3206 __FILE__,__LINE__, info->device_name, result );
3207 return result;
3208}
3209
3210/* set modem control signals (DTR/RTS)
3211 */
3212static int tiocmset(struct tty_struct *tty,
3213 unsigned int set, unsigned int clear)
3214{
3215 SLMP_INFO *info = tty->driver_data;
3216 unsigned long flags;
3217
3218 if (debug_level >= DEBUG_LEVEL_INFO)
3219 printk("%s(%d):%s tiocmset(%x,%x)\n",
3220 __FILE__,__LINE__,info->device_name, set, clear);
3221
3222 if (set & TIOCM_RTS)
3223 info->serial_signals |= SerialSignal_RTS;
3224 if (set & TIOCM_DTR)
3225 info->serial_signals |= SerialSignal_DTR;
3226 if (clear & TIOCM_RTS)
3227 info->serial_signals &= ~SerialSignal_RTS;
3228 if (clear & TIOCM_DTR)
3229 info->serial_signals &= ~SerialSignal_DTR;
3230
3231 spin_lock_irqsave(&info->lock,flags);
3232 set_signals(info);
3233 spin_unlock_irqrestore(&info->lock,flags);
3234
3235 return 0;
3236}
3237
3238static int carrier_raised(struct tty_port *port)
3239{
3240 SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3241 unsigned long flags;
3242
3243 spin_lock_irqsave(&info->lock,flags);
3244 get_signals(info);
3245 spin_unlock_irqrestore(&info->lock,flags);
3246
3247 return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
3248}
3249
3250static void dtr_rts(struct tty_port *port, int on)
3251{
3252 SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3253 unsigned long flags;
3254
3255 spin_lock_irqsave(&info->lock,flags);
3256 if (on)
3257 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
3258 else
3259 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
3260 set_signals(info);
3261 spin_unlock_irqrestore(&info->lock,flags);
3262}
3263
3264/* Block the current process until the specified port is ready to open.
3265 */
3266static int block_til_ready(struct tty_struct *tty, struct file *filp,
3267 SLMP_INFO *info)
3268{
3269 DECLARE_WAITQUEUE(wait, current);
3270 int retval;
3271 bool do_clocal = false;
3272 unsigned long flags;
3273 int cd;
3274 struct tty_port *port = &info->port;
3275
3276 if (debug_level >= DEBUG_LEVEL_INFO)
3277 printk("%s(%d):%s block_til_ready()\n",
3278 __FILE__,__LINE__, tty->driver->name );
3279
3280 if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) {
3281 /* nonblock mode is set or port is not enabled */
3282 /* just verify that callout device is not active */
3283 tty_port_set_active(port, 1);
3284 return 0;
3285 }
3286
3287 if (C_CLOCAL(tty))
3288 do_clocal = true;
3289
3290 /* Wait for carrier detect and the line to become
3291 * free (i.e., not in use by the callout). While we are in
3292 * this loop, port->count is dropped by one, so that
3293 * close() knows when to free things. We restore it upon
3294 * exit, either normal or abnormal.
3295 */
3296
3297 retval = 0;
3298 add_wait_queue(&port->open_wait, &wait);
3299
3300 if (debug_level >= DEBUG_LEVEL_INFO)
3301 printk("%s(%d):%s block_til_ready() before block, count=%d\n",
3302 __FILE__,__LINE__, tty->driver->name, port->count );
3303
3304 spin_lock_irqsave(&info->lock, flags);
3305 port->count--;
3306 spin_unlock_irqrestore(&info->lock, flags);
3307 port->blocked_open++;
3308
3309 while (1) {
3310 if (C_BAUD(tty) && tty_port_initialized(port))
3311 tty_port_raise_dtr_rts(port);
3312
3313 set_current_state(TASK_INTERRUPTIBLE);
3314
3315 if (tty_hung_up_p(filp) || !tty_port_initialized(port)) {
3316 retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3317 -EAGAIN : -ERESTARTSYS;
3318 break;
3319 }
3320
3321 cd = tty_port_carrier_raised(port);
3322 if (do_clocal || cd)
3323 break;
3324
3325 if (signal_pending(current)) {
3326 retval = -ERESTARTSYS;
3327 break;
3328 }
3329
3330 if (debug_level >= DEBUG_LEVEL_INFO)
3331 printk("%s(%d):%s block_til_ready() count=%d\n",
3332 __FILE__,__LINE__, tty->driver->name, port->count );
3333
3334 tty_unlock(tty);
3335 schedule();
3336 tty_lock(tty);
3337 }
3338
3339 set_current_state(TASK_RUNNING);
3340 remove_wait_queue(&port->open_wait, &wait);
3341 if (!tty_hung_up_p(filp))
3342 port->count++;
3343 port->blocked_open--;
3344
3345 if (debug_level >= DEBUG_LEVEL_INFO)
3346 printk("%s(%d):%s block_til_ready() after, count=%d\n",
3347 __FILE__,__LINE__, tty->driver->name, port->count );
3348
3349 if (!retval)
3350 tty_port_set_active(port, 1);
3351
3352 return retval;
3353}
3354
3355static int alloc_dma_bufs(SLMP_INFO *info)
3356{
3357 unsigned short BuffersPerFrame;
3358 unsigned short BufferCount;
3359
3360 // Force allocation to start at 64K boundary for each port.
3361 // This is necessary because *all* buffer descriptors for a port
3362 // *must* be in the same 64K block. All descriptors on a port
3363 // share a common 'base' address (upper 8 bits of 24 bits) programmed
3364 // into the CBP register.
3365 info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
3366
3367 /* Calculate the number of DMA buffers necessary to hold the */
3368 /* largest allowable frame size. Note: If the max frame size is */
3369 /* not an even multiple of the DMA buffer size then we need to */
3370 /* round the buffer count per frame up one. */
3371
3372 BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
3373 if ( info->max_frame_size % SCABUFSIZE )
3374 BuffersPerFrame++;
3375
3376 /* calculate total number of data buffers (SCABUFSIZE) possible
3377 * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
3378 * for the descriptor list (BUFFERLISTSIZE).
3379 */
3380 BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
3381
3382 /* limit number of buffers to maximum amount of descriptors */
3383 if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
3384 BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
3385
3386 /* use enough buffers to transmit one max size frame */
3387 info->tx_buf_count = BuffersPerFrame + 1;
3388
3389 /* never use more than half the available buffers for transmit */
3390 if (info->tx_buf_count > (BufferCount/2))
3391 info->tx_buf_count = BufferCount/2;
3392
3393 if (info->tx_buf_count > SCAMAXDESC)
3394 info->tx_buf_count = SCAMAXDESC;
3395
3396 /* use remaining buffers for receive */
3397 info->rx_buf_count = BufferCount - info->tx_buf_count;
3398
3399 if (info->rx_buf_count > SCAMAXDESC)
3400 info->rx_buf_count = SCAMAXDESC;
3401
3402 if ( debug_level >= DEBUG_LEVEL_INFO )
3403 printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
3404 __FILE__,__LINE__, info->device_name,
3405 info->tx_buf_count,info->rx_buf_count);
3406
3407 if ( alloc_buf_list( info ) < 0 ||
3408 alloc_frame_bufs(info,
3409 info->rx_buf_list,
3410 info->rx_buf_list_ex,
3411 info->rx_buf_count) < 0 ||
3412 alloc_frame_bufs(info,
3413 info->tx_buf_list,
3414 info->tx_buf_list_ex,
3415 info->tx_buf_count) < 0 ||
3416 alloc_tmp_rx_buf(info) < 0 ) {
3417 printk("%s(%d):%s Can't allocate DMA buffer memory\n",
3418 __FILE__,__LINE__, info->device_name);
3419 return -ENOMEM;
3420 }
3421
3422 rx_reset_buffers( info );
3423
3424 return 0;
3425}
3426
3427/* Allocate DMA buffers for the transmit and receive descriptor lists.
3428 */
3429static int alloc_buf_list(SLMP_INFO *info)
3430{
3431 unsigned int i;
3432
3433 /* build list in adapter shared memory */
3434 info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
3435 info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
3436 info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
3437
3438 memset(info->buffer_list, 0, BUFFERLISTSIZE);
3439
3440 /* Save virtual address pointers to the receive and */
3441 /* transmit buffer lists. (Receive 1st). These pointers will */
3442 /* be used by the processor to access the lists. */
3443 info->rx_buf_list = (SCADESC *)info->buffer_list;
3444
3445 info->tx_buf_list = (SCADESC *)info->buffer_list;
3446 info->tx_buf_list += info->rx_buf_count;
3447
3448 /* Build links for circular buffer entry lists (tx and rx)
3449 *
3450 * Note: links are physical addresses read by the SCA device
3451 * to determine the next buffer entry to use.
3452 */
3453
3454 for ( i = 0; i < info->rx_buf_count; i++ ) {
3455 /* calculate and store physical address of this buffer entry */
3456 info->rx_buf_list_ex[i].phys_entry =
3457 info->buffer_list_phys + (i * SCABUFSIZE);
3458
3459 /* calculate and store physical address of */
3460 /* next entry in cirular list of entries */
3461 info->rx_buf_list[i].next = info->buffer_list_phys;
3462 if ( i < info->rx_buf_count - 1 )
3463 info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3464
3465 info->rx_buf_list[i].length = SCABUFSIZE;
3466 }
3467
3468 for ( i = 0; i < info->tx_buf_count; i++ ) {
3469 /* calculate and store physical address of this buffer entry */
3470 info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
3471 ((info->rx_buf_count + i) * sizeof(SCADESC));
3472
3473 /* calculate and store physical address of */
3474 /* next entry in cirular list of entries */
3475
3476 info->tx_buf_list[i].next = info->buffer_list_phys +
3477 info->rx_buf_count * sizeof(SCADESC);
3478
3479 if ( i < info->tx_buf_count - 1 )
3480 info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3481 }
3482
3483 return 0;
3484}
3485
3486/* Allocate the frame DMA buffers used by the specified buffer list.
3487 */
3488static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
3489{
3490 int i;
3491 unsigned long phys_addr;
3492
3493 for ( i = 0; i < count; i++ ) {
3494 buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
3495 phys_addr = info->port_array[0]->last_mem_alloc;
3496 info->port_array[0]->last_mem_alloc += SCABUFSIZE;
3497
3498 buf_list[i].buf_ptr = (unsigned short)phys_addr;
3499 buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
3500 }
3501
3502 return 0;
3503}
3504
3505static void free_dma_bufs(SLMP_INFO *info)
3506{
3507 info->buffer_list = NULL;
3508 info->rx_buf_list = NULL;
3509 info->tx_buf_list = NULL;
3510}
3511
3512/* allocate buffer large enough to hold max_frame_size.
3513 * This buffer is used to pass an assembled frame to the line discipline.
3514 */
3515static int alloc_tmp_rx_buf(SLMP_INFO *info)
3516{
3517 info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
3518 if (info->tmp_rx_buf == NULL)
3519 return -ENOMEM;
3520 /* unused flag buffer to satisfy receive_buf calling interface */
3521 info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
3522 if (!info->flag_buf) {
3523 kfree(info->tmp_rx_buf);
3524 info->tmp_rx_buf = NULL;
3525 return -ENOMEM;
3526 }
3527 return 0;
3528}
3529
3530static void free_tmp_rx_buf(SLMP_INFO *info)
3531{
3532 kfree(info->tmp_rx_buf);
3533 info->tmp_rx_buf = NULL;
3534 kfree(info->flag_buf);
3535 info->flag_buf = NULL;
3536}
3537
3538static int claim_resources(SLMP_INFO *info)
3539{
3540 if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
3541 printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
3542 __FILE__,__LINE__,info->device_name, info->phys_memory_base);
3543 info->init_error = DiagStatus_AddressConflict;
3544 goto errout;
3545 }
3546 else
3547 info->shared_mem_requested = true;
3548
3549 if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
3550 printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
3551 __FILE__,__LINE__,info->device_name, info->phys_lcr_base);
3552 info->init_error = DiagStatus_AddressConflict;
3553 goto errout;
3554 }
3555 else
3556 info->lcr_mem_requested = true;
3557
3558 if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
3559 printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
3560 __FILE__,__LINE__,info->device_name, info->phys_sca_base);
3561 info->init_error = DiagStatus_AddressConflict;
3562 goto errout;
3563 }
3564 else
3565 info->sca_base_requested = true;
3566
3567 if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
3568 printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
3569 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
3570 info->init_error = DiagStatus_AddressConflict;
3571 goto errout;
3572 }
3573 else
3574 info->sca_statctrl_requested = true;
3575
3576 info->memory_base = ioremap_nocache(info->phys_memory_base,
3577 SCA_MEM_SIZE);
3578 if (!info->memory_base) {
3579 printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n",
3580 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3581 info->init_error = DiagStatus_CantAssignPciResources;
3582 goto errout;
3583 }
3584
3585 info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE);
3586 if (!info->lcr_base) {
3587 printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n",
3588 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
3589 info->init_error = DiagStatus_CantAssignPciResources;
3590 goto errout;
3591 }
3592 info->lcr_base += info->lcr_offset;
3593
3594 info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE);
3595 if (!info->sca_base) {
3596 printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n",
3597 __FILE__,__LINE__,info->device_name, info->phys_sca_base );
3598 info->init_error = DiagStatus_CantAssignPciResources;
3599 goto errout;
3600 }
3601 info->sca_base += info->sca_offset;
3602
3603 info->statctrl_base = ioremap_nocache(info->phys_statctrl_base,
3604 PAGE_SIZE);
3605 if (!info->statctrl_base) {
3606 printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n",
3607 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
3608 info->init_error = DiagStatus_CantAssignPciResources;
3609 goto errout;
3610 }
3611 info->statctrl_base += info->statctrl_offset;
3612
3613 if ( !memory_test(info) ) {
3614 printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
3615 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3616 info->init_error = DiagStatus_MemoryError;
3617 goto errout;
3618 }
3619
3620 return 0;
3621
3622errout:
3623 release_resources( info );
3624 return -ENODEV;
3625}
3626
3627static void release_resources(SLMP_INFO *info)
3628{
3629 if ( debug_level >= DEBUG_LEVEL_INFO )
3630 printk( "%s(%d):%s release_resources() entry\n",
3631 __FILE__,__LINE__,info->device_name );
3632
3633 if ( info->irq_requested ) {
3634 free_irq(info->irq_level, info);
3635 info->irq_requested = false;
3636 }
3637
3638 if ( info->shared_mem_requested ) {
3639 release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
3640 info->shared_mem_requested = false;
3641 }
3642 if ( info->lcr_mem_requested ) {
3643 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
3644 info->lcr_mem_requested = false;
3645 }
3646 if ( info->sca_base_requested ) {
3647 release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
3648 info->sca_base_requested = false;
3649 }
3650 if ( info->sca_statctrl_requested ) {
3651 release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
3652 info->sca_statctrl_requested = false;
3653 }
3654
3655 if (info->memory_base){
3656 iounmap(info->memory_base);
3657 info->memory_base = NULL;
3658 }
3659
3660 if (info->sca_base) {
3661 iounmap(info->sca_base - info->sca_offset);
3662 info->sca_base=NULL;
3663 }
3664
3665 if (info->statctrl_base) {
3666 iounmap(info->statctrl_base - info->statctrl_offset);
3667 info->statctrl_base=NULL;
3668 }
3669
3670 if (info->lcr_base){
3671 iounmap(info->lcr_base - info->lcr_offset);
3672 info->lcr_base = NULL;
3673 }
3674
3675 if ( debug_level >= DEBUG_LEVEL_INFO )
3676 printk( "%s(%d):%s release_resources() exit\n",
3677 __FILE__,__LINE__,info->device_name );
3678}
3679
3680/* Add the specified device instance data structure to the
3681 * global linked list of devices and increment the device count.
3682 */
3683static int add_device(SLMP_INFO *info)
3684{
3685 info->next_device = NULL;
3686 info->line = synclinkmp_device_count;
3687 sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
3688
3689 if (info->line < MAX_DEVICES) {
3690 if (maxframe[info->line])
3691 info->max_frame_size = maxframe[info->line];
3692 }
3693
3694 synclinkmp_device_count++;
3695
3696 if ( !synclinkmp_device_list )
3697 synclinkmp_device_list = info;
3698 else {
3699 SLMP_INFO *current_dev = synclinkmp_device_list;
3700 while( current_dev->next_device )
3701 current_dev = current_dev->next_device;
3702 current_dev->next_device = info;
3703 }
3704
3705 if ( info->max_frame_size < 4096 )
3706 info->max_frame_size = 4096;
3707 else if ( info->max_frame_size > 65535 )
3708 info->max_frame_size = 65535;
3709
3710 printk( "SyncLink MultiPort %s: "
3711 "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
3712 info->device_name,
3713 info->phys_sca_base,
3714 info->phys_memory_base,
3715 info->phys_statctrl_base,
3716 info->phys_lcr_base,
3717 info->irq_level,
3718 info->max_frame_size );
3719
3720#if SYNCLINK_GENERIC_HDLC
3721 return hdlcdev_init(info);
3722#else
3723 return 0;
3724#endif
3725}
3726
3727static const struct tty_port_operations port_ops = {
3728 .carrier_raised = carrier_raised,
3729 .dtr_rts = dtr_rts,
3730};
3731
3732/* Allocate and initialize a device instance structure
3733 *
3734 * Return Value: pointer to SLMP_INFO if success, otherwise NULL
3735 */
3736static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3737{
3738 SLMP_INFO *info;
3739
3740 info = kzalloc(sizeof(SLMP_INFO),
3741 GFP_KERNEL);
3742
3743 if (!info) {
3744 printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
3745 __FILE__,__LINE__, adapter_num, port_num);
3746 } else {
3747 tty_port_init(&info->port);
3748 info->port.ops = &port_ops;
3749 info->magic = MGSL_MAGIC;
3750 INIT_WORK(&info->task, bh_handler);
3751 info->max_frame_size = 4096;
3752 info->port.close_delay = 5*HZ/10;
3753 info->port.closing_wait = 30*HZ;
3754 init_waitqueue_head(&info->status_event_wait_q);
3755 init_waitqueue_head(&info->event_wait_q);
3756 spin_lock_init(&info->netlock);
3757 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3758 info->idle_mode = HDLC_TXIDLE_FLAGS;
3759 info->adapter_num = adapter_num;
3760 info->port_num = port_num;
3761
3762 /* Copy configuration info to device instance data */
3763 info->irq_level = pdev->irq;
3764 info->phys_lcr_base = pci_resource_start(pdev,0);
3765 info->phys_sca_base = pci_resource_start(pdev,2);
3766 info->phys_memory_base = pci_resource_start(pdev,3);
3767 info->phys_statctrl_base = pci_resource_start(pdev,4);
3768
3769 /* Because veremap only works on page boundaries we must map
3770 * a larger area than is actually implemented for the LCR
3771 * memory range. We map a full page starting at the page boundary.
3772 */
3773 info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
3774 info->phys_lcr_base &= ~(PAGE_SIZE-1);
3775
3776 info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1);
3777 info->phys_sca_base &= ~(PAGE_SIZE-1);
3778
3779 info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1);
3780 info->phys_statctrl_base &= ~(PAGE_SIZE-1);
3781
3782 info->bus_type = MGSL_BUS_TYPE_PCI;
3783 info->irq_flags = IRQF_SHARED;
3784
3785 timer_setup(&info->tx_timer, tx_timeout, 0);
3786 timer_setup(&info->status_timer, status_timeout, 0);
3787
3788 /* Store the PCI9050 misc control register value because a flaw
3789 * in the PCI9050 prevents LCR registers from being read if
3790 * BIOS assigns an LCR base address with bit 7 set.
3791 *
3792 * Only the misc control register is accessed for which only
3793 * write access is needed, so set an initial value and change
3794 * bits to the device instance data as we write the value
3795 * to the actual misc control register.
3796 */
3797 info->misc_ctrl_value = 0x087e4546;
3798
3799 /* initial port state is unknown - if startup errors
3800 * occur, init_error will be set to indicate the
3801 * problem. Once the port is fully initialized,
3802 * this value will be set to 0 to indicate the
3803 * port is available.
3804 */
3805 info->init_error = -1;
3806 }
3807
3808 return info;
3809}
3810
3811static int device_init(int adapter_num, struct pci_dev *pdev)
3812{
3813 SLMP_INFO *port_array[SCA_MAX_PORTS];
3814 int port, rc;
3815
3816 /* allocate device instances for up to SCA_MAX_PORTS devices */
3817 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3818 port_array[port] = alloc_dev(adapter_num,port,pdev);
3819 if( port_array[port] == NULL ) {
3820 for (--port; port >= 0; --port) {
3821 tty_port_destroy(&port_array[port]->port);
3822 kfree(port_array[port]);
3823 }
3824 return -ENOMEM;
3825 }
3826 }
3827
3828 /* give copy of port_array to all ports and add to device list */
3829 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3830 memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
3831 rc = add_device( port_array[port] );
3832 if (rc)
3833 goto err_add;
3834 spin_lock_init(&port_array[port]->lock);
3835 }
3836
3837 /* Allocate and claim adapter resources */
3838 if ( !claim_resources(port_array[0]) ) {
3839
3840 alloc_dma_bufs(port_array[0]);
3841
3842 /* copy resource information from first port to others */
3843 for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
3844 port_array[port]->lock = port_array[0]->lock;
3845 port_array[port]->irq_level = port_array[0]->irq_level;
3846 port_array[port]->memory_base = port_array[0]->memory_base;
3847 port_array[port]->sca_base = port_array[0]->sca_base;
3848 port_array[port]->statctrl_base = port_array[0]->statctrl_base;
3849 port_array[port]->lcr_base = port_array[0]->lcr_base;
3850 alloc_dma_bufs(port_array[port]);
3851 }
3852
3853 rc = request_irq(port_array[0]->irq_level,
3854 synclinkmp_interrupt,
3855 port_array[0]->irq_flags,
3856 port_array[0]->device_name,
3857 port_array[0]);
3858 if ( rc ) {
3859 printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n",
3860 __FILE__,__LINE__,
3861 port_array[0]->device_name,
3862 port_array[0]->irq_level );
3863 goto err_irq;
3864 }
3865 port_array[0]->irq_requested = true;
3866 adapter_test(port_array[0]);
3867 }
3868 return 0;
3869err_irq:
3870 release_resources( port_array[0] );
3871err_add:
3872 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3873 tty_port_destroy(&port_array[port]->port);
3874 kfree(port_array[port]);
3875 }
3876 return rc;
3877}
3878
3879static const struct tty_operations ops = {
3880 .install = install,
3881 .open = open,
3882 .close = close,
3883 .write = write,
3884 .put_char = put_char,
3885 .flush_chars = flush_chars,
3886 .write_room = write_room,
3887 .chars_in_buffer = chars_in_buffer,
3888 .flush_buffer = flush_buffer,
3889 .ioctl = ioctl,
3890 .throttle = throttle,
3891 .unthrottle = unthrottle,
3892 .send_xchar = send_xchar,
3893 .break_ctl = set_break,
3894 .wait_until_sent = wait_until_sent,
3895 .set_termios = set_termios,
3896 .stop = tx_hold,
3897 .start = tx_release,
3898 .hangup = hangup,
3899 .tiocmget = tiocmget,
3900 .tiocmset = tiocmset,
3901 .get_icount = get_icount,
3902 .proc_fops = &synclinkmp_proc_fops,
3903};
3904
3905
3906static void synclinkmp_cleanup(void)
3907{
3908 int rc;
3909 SLMP_INFO *info;
3910 SLMP_INFO *tmp;
3911
3912 printk("Unloading %s %s\n", driver_name, driver_version);
3913
3914 if (serial_driver) {
3915 rc = tty_unregister_driver(serial_driver);
3916 if (rc)
3917 printk("%s(%d) failed to unregister tty driver err=%d\n",
3918 __FILE__,__LINE__,rc);
3919 put_tty_driver(serial_driver);
3920 }
3921
3922 /* reset devices */
3923 info = synclinkmp_device_list;
3924 while(info) {
3925 reset_port(info);
3926 info = info->next_device;
3927 }
3928
3929 /* release devices */
3930 info = synclinkmp_device_list;
3931 while(info) {
3932#if SYNCLINK_GENERIC_HDLC
3933 hdlcdev_exit(info);
3934#endif
3935 free_dma_bufs(info);
3936 free_tmp_rx_buf(info);
3937 if ( info->port_num == 0 ) {
3938 if (info->sca_base)
3939 write_reg(info, LPR, 1); /* set low power mode */
3940 release_resources(info);
3941 }
3942 tmp = info;
3943 info = info->next_device;
3944 tty_port_destroy(&tmp->port);
3945 kfree(tmp);
3946 }
3947
3948 pci_unregister_driver(&synclinkmp_pci_driver);
3949}
3950
3951/* Driver initialization entry point.
3952 */
3953
3954static int __init synclinkmp_init(void)
3955{
3956 int rc;
3957
3958 if (break_on_load) {
3959 synclinkmp_get_text_ptr();
3960 BREAKPOINT();
3961 }
3962
3963 printk("%s %s\n", driver_name, driver_version);
3964
3965 if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
3966 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
3967 return rc;
3968 }
3969
3970 serial_driver = alloc_tty_driver(128);
3971 if (!serial_driver) {
3972 rc = -ENOMEM;
3973 goto error;
3974 }
3975
3976 /* Initialize the tty_driver structure */
3977
3978 serial_driver->driver_name = "synclinkmp";
3979 serial_driver->name = "ttySLM";
3980 serial_driver->major = ttymajor;
3981 serial_driver->minor_start = 64;
3982 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3983 serial_driver->subtype = SERIAL_TYPE_NORMAL;
3984 serial_driver->init_termios = tty_std_termios;
3985 serial_driver->init_termios.c_cflag =
3986 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3987 serial_driver->init_termios.c_ispeed = 9600;
3988 serial_driver->init_termios.c_ospeed = 9600;
3989 serial_driver->flags = TTY_DRIVER_REAL_RAW;
3990 tty_set_operations(serial_driver, &ops);
3991 if ((rc = tty_register_driver(serial_driver)) < 0) {
3992 printk("%s(%d):Couldn't register serial driver\n",
3993 __FILE__,__LINE__);
3994 put_tty_driver(serial_driver);
3995 serial_driver = NULL;
3996 goto error;
3997 }
3998
3999 printk("%s %s, tty major#%d\n",
4000 driver_name, driver_version,
4001 serial_driver->major);
4002
4003 return 0;
4004
4005error:
4006 synclinkmp_cleanup();
4007 return rc;
4008}
4009
4010static void __exit synclinkmp_exit(void)
4011{
4012 synclinkmp_cleanup();
4013}
4014
4015module_init(synclinkmp_init);
4016module_exit(synclinkmp_exit);
4017
4018/* Set the port for internal loopback mode.
4019 * The TxCLK and RxCLK signals are generated from the BRG and
4020 * the TxD is looped back to the RxD internally.
4021 */
4022static void enable_loopback(SLMP_INFO *info, int enable)
4023{
4024 if (enable) {
4025 /* MD2 (Mode Register 2)
4026 * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback
4027 */
4028 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
4029
4030 /* degate external TxC clock source */
4031 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4032 write_control_reg(info);
4033
4034 /* RXS/TXS (Rx/Tx clock source)
4035 * 07 Reserved, must be 0
4036 * 06..04 Clock Source, 100=BRG
4037 * 03..00 Clock Divisor, 0000=1
4038 */
4039 write_reg(info, RXS, 0x40);
4040 write_reg(info, TXS, 0x40);
4041
4042 } else {
4043 /* MD2 (Mode Register 2)
4044 * 01..00 CNCT<1..0> Channel connection, 0=normal
4045 */
4046 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
4047
4048 /* RXS/TXS (Rx/Tx clock source)
4049 * 07 Reserved, must be 0
4050 * 06..04 Clock Source, 000=RxC/TxC Pin
4051 * 03..00 Clock Divisor, 0000=1
4052 */
4053 write_reg(info, RXS, 0x00);
4054 write_reg(info, TXS, 0x00);
4055 }
4056
4057 /* set LinkSpeed if available, otherwise default to 2Mbps */
4058 if (info->params.clock_speed)
4059 set_rate(info, info->params.clock_speed);
4060 else
4061 set_rate(info, 3686400);
4062}
4063
4064/* Set the baud rate register to the desired speed
4065 *
4066 * data_rate data rate of clock in bits per second
4067 * A data rate of 0 disables the AUX clock.
4068 */
4069static void set_rate( SLMP_INFO *info, u32 data_rate )
4070{
4071 u32 TMCValue;
4072 unsigned char BRValue;
4073 u32 Divisor=0;
4074
4075 /* fBRG = fCLK/(TMC * 2^BR)
4076 */
4077 if (data_rate != 0) {
4078 Divisor = 14745600/data_rate;
4079 if (!Divisor)
4080 Divisor = 1;
4081
4082 TMCValue = Divisor;
4083
4084 BRValue = 0;
4085 if (TMCValue != 1 && TMCValue != 2) {
4086 /* BRValue of 0 provides 50/50 duty cycle *only* when
4087 * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
4088 * 50/50 duty cycle.
4089 */
4090 BRValue = 1;
4091 TMCValue >>= 1;
4092 }
4093
4094 /* while TMCValue is too big for TMC register, divide
4095 * by 2 and increment BR exponent.
4096 */
4097 for(; TMCValue > 256 && BRValue < 10; BRValue++)
4098 TMCValue >>= 1;
4099
4100 write_reg(info, TXS,
4101 (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
4102 write_reg(info, RXS,
4103 (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
4104 write_reg(info, TMC, (unsigned char)TMCValue);
4105 }
4106 else {
4107 write_reg(info, TXS,0);
4108 write_reg(info, RXS,0);
4109 write_reg(info, TMC, 0);
4110 }
4111}
4112
4113/* Disable receiver
4114 */
4115static void rx_stop(SLMP_INFO *info)
4116{
4117 if (debug_level >= DEBUG_LEVEL_ISR)
4118 printk("%s(%d):%s rx_stop()\n",
4119 __FILE__,__LINE__, info->device_name );
4120
4121 write_reg(info, CMD, RXRESET);
4122
4123 info->ie0_value &= ~RXRDYE;
4124 write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */
4125
4126 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4127 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4128 write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */
4129
4130 info->rx_enabled = false;
4131 info->rx_overflow = false;
4132}
4133
4134/* enable the receiver
4135 */
4136static void rx_start(SLMP_INFO *info)
4137{
4138 int i;
4139
4140 if (debug_level >= DEBUG_LEVEL_ISR)
4141 printk("%s(%d):%s rx_start()\n",
4142 __FILE__,__LINE__, info->device_name );
4143
4144 write_reg(info, CMD, RXRESET);
4145
4146 if ( info->params.mode == MGSL_MODE_HDLC ) {
4147 /* HDLC, disabe IRQ on rxdata */
4148 info->ie0_value &= ~RXRDYE;
4149 write_reg(info, IE0, info->ie0_value);
4150
4151 /* Reset all Rx DMA buffers and program rx dma */
4152 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4153 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4154
4155 for (i = 0; i < info->rx_buf_count; i++) {
4156 info->rx_buf_list[i].status = 0xff;
4157
4158 // throttle to 4 shared memory writes at a time to prevent
4159 // hogging local bus (keep latency time for DMA requests low).
4160 if (!(i % 4))
4161 read_status_reg(info);
4162 }
4163 info->current_rx_buf = 0;
4164
4165 /* set current/1st descriptor address */
4166 write_reg16(info, RXDMA + CDA,
4167 info->rx_buf_list_ex[0].phys_entry);
4168
4169 /* set new last rx descriptor address */
4170 write_reg16(info, RXDMA + EDA,
4171 info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
4172
4173 /* set buffer length (shared by all rx dma data buffers) */
4174 write_reg16(info, RXDMA + BFL, SCABUFSIZE);
4175
4176 write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */
4177 write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */
4178 } else {
4179 /* async, enable IRQ on rxdata */
4180 info->ie0_value |= RXRDYE;
4181 write_reg(info, IE0, info->ie0_value);
4182 }
4183
4184 write_reg(info, CMD, RXENABLE);
4185
4186 info->rx_overflow = false;
4187 info->rx_enabled = true;
4188}
4189
4190/* Enable the transmitter and send a transmit frame if
4191 * one is loaded in the DMA buffers.
4192 */
4193static void tx_start(SLMP_INFO *info)
4194{
4195 if (debug_level >= DEBUG_LEVEL_ISR)
4196 printk("%s(%d):%s tx_start() tx_count=%d\n",
4197 __FILE__,__LINE__, info->device_name,info->tx_count );
4198
4199 if (!info->tx_enabled ) {
4200 write_reg(info, CMD, TXRESET);
4201 write_reg(info, CMD, TXENABLE);
4202 info->tx_enabled = true;
4203 }
4204
4205 if ( info->tx_count ) {
4206
4207 /* If auto RTS enabled and RTS is inactive, then assert */
4208 /* RTS and set a flag indicating that the driver should */
4209 /* negate RTS when the transmission completes. */
4210
4211 info->drop_rts_on_tx_done = false;
4212
4213 if (info->params.mode != MGSL_MODE_ASYNC) {
4214
4215 if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
4216 get_signals( info );
4217 if ( !(info->serial_signals & SerialSignal_RTS) ) {
4218 info->serial_signals |= SerialSignal_RTS;
4219 set_signals( info );
4220 info->drop_rts_on_tx_done = true;
4221 }
4222 }
4223
4224 write_reg16(info, TRC0,
4225 (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
4226
4227 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4228 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4229
4230 /* set TX CDA (current descriptor address) */
4231 write_reg16(info, TXDMA + CDA,
4232 info->tx_buf_list_ex[0].phys_entry);
4233
4234 /* set TX EDA (last descriptor address) */
4235 write_reg16(info, TXDMA + EDA,
4236 info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
4237
4238 /* enable underrun IRQ */
4239 info->ie1_value &= ~IDLE;
4240 info->ie1_value |= UDRN;
4241 write_reg(info, IE1, info->ie1_value);
4242 write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
4243
4244 write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */
4245 write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */
4246
4247 mod_timer(&info->tx_timer, jiffies +
4248 msecs_to_jiffies(5000));
4249 }
4250 else {
4251 tx_load_fifo(info);
4252 /* async, enable IRQ on txdata */
4253 info->ie0_value |= TXRDYE;
4254 write_reg(info, IE0, info->ie0_value);
4255 }
4256
4257 info->tx_active = true;
4258 }
4259}
4260
4261/* stop the transmitter and DMA
4262 */
4263static void tx_stop( SLMP_INFO *info )
4264{
4265 if (debug_level >= DEBUG_LEVEL_ISR)
4266 printk("%s(%d):%s tx_stop()\n",
4267 __FILE__,__LINE__, info->device_name );
4268
4269 del_timer(&info->tx_timer);
4270
4271 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4272 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4273
4274 write_reg(info, CMD, TXRESET);
4275
4276 info->ie1_value &= ~(UDRN + IDLE);
4277 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
4278 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
4279
4280 info->ie0_value &= ~TXRDYE;
4281 write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */
4282
4283 info->tx_enabled = false;
4284 info->tx_active = false;
4285}
4286
4287/* Fill the transmit FIFO until the FIFO is full or
4288 * there is no more data to load.
4289 */
4290static void tx_load_fifo(SLMP_INFO *info)
4291{
4292 u8 TwoBytes[2];
4293
4294 /* do nothing is now tx data available and no XON/XOFF pending */
4295
4296 if ( !info->tx_count && !info->x_char )
4297 return;
4298
4299 /* load the Transmit FIFO until FIFOs full or all data sent */
4300
4301 while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
4302
4303 /* there is more space in the transmit FIFO and */
4304 /* there is more data in transmit buffer */
4305
4306 if ( (info->tx_count > 1) && !info->x_char ) {
4307 /* write 16-bits */
4308 TwoBytes[0] = info->tx_buf[info->tx_get++];
4309 if (info->tx_get >= info->max_frame_size)
4310 info->tx_get -= info->max_frame_size;
4311 TwoBytes[1] = info->tx_buf[info->tx_get++];
4312 if (info->tx_get >= info->max_frame_size)
4313 info->tx_get -= info->max_frame_size;
4314
4315 write_reg16(info, TRB, *((u16 *)TwoBytes));
4316
4317 info->tx_count -= 2;
4318 info->icount.tx += 2;
4319 } else {
4320 /* only 1 byte left to transmit or 1 FIFO slot left */
4321
4322 if (info->x_char) {
4323 /* transmit pending high priority char */
4324 write_reg(info, TRB, info->x_char);
4325 info->x_char = 0;
4326 } else {
4327 write_reg(info, TRB, info->tx_buf[info->tx_get++]);
4328 if (info->tx_get >= info->max_frame_size)
4329 info->tx_get -= info->max_frame_size;
4330 info->tx_count--;
4331 }
4332 info->icount.tx++;
4333 }
4334 }
4335}
4336
4337/* Reset a port to a known state
4338 */
4339static void reset_port(SLMP_INFO *info)
4340{
4341 if (info->sca_base) {
4342
4343 tx_stop(info);
4344 rx_stop(info);
4345
4346 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
4347 set_signals(info);
4348
4349 /* disable all port interrupts */
4350 info->ie0_value = 0;
4351 info->ie1_value = 0;
4352 info->ie2_value = 0;
4353 write_reg(info, IE0, info->ie0_value);
4354 write_reg(info, IE1, info->ie1_value);
4355 write_reg(info, IE2, info->ie2_value);
4356
4357 write_reg(info, CMD, CHRESET);
4358 }
4359}
4360
4361/* Reset all the ports to a known state.
4362 */
4363static void reset_adapter(SLMP_INFO *info)
4364{
4365 int i;
4366
4367 for ( i=0; i < SCA_MAX_PORTS; ++i) {
4368 if (info->port_array[i])
4369 reset_port(info->port_array[i]);
4370 }
4371}
4372
4373/* Program port for asynchronous communications.
4374 */
4375static void async_mode(SLMP_INFO *info)
4376{
4377
4378 unsigned char RegValue;
4379
4380 tx_stop(info);
4381 rx_stop(info);
4382
4383 /* MD0, Mode Register 0
4384 *
4385 * 07..05 PRCTL<2..0>, Protocol Mode, 000=async
4386 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4387 * 03 Reserved, must be 0
4388 * 02 CRCCC, CRC Calculation, 0=disabled
4389 * 01..00 STOP<1..0> Stop bits (00=1,10=2)
4390 *
4391 * 0000 0000
4392 */
4393 RegValue = 0x00;
4394 if (info->params.stop_bits != 1)
4395 RegValue |= BIT1;
4396 write_reg(info, MD0, RegValue);
4397
4398 /* MD1, Mode Register 1
4399 *
4400 * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
4401 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
4402 * 03..02 RXCHR<1..0>, rx char size
4403 * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
4404 *
4405 * 0100 0000
4406 */
4407 RegValue = 0x40;
4408 switch (info->params.data_bits) {
4409 case 7: RegValue |= BIT4 + BIT2; break;
4410 case 6: RegValue |= BIT5 + BIT3; break;
4411 case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
4412 }
4413 if (info->params.parity != ASYNC_PARITY_NONE) {
4414 RegValue |= BIT1;
4415 if (info->params.parity == ASYNC_PARITY_ODD)
4416 RegValue |= BIT0;
4417 }
4418 write_reg(info, MD1, RegValue);
4419
4420 /* MD2, Mode Register 2
4421 *
4422 * 07..02 Reserved, must be 0
4423 * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback
4424 *
4425 * 0000 0000
4426 */
4427 RegValue = 0x00;
4428 if (info->params.loopback)
4429 RegValue |= (BIT1 + BIT0);
4430 write_reg(info, MD2, RegValue);
4431
4432 /* RXS, Receive clock source
4433 *
4434 * 07 Reserved, must be 0
4435 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4436 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4437 */
4438 RegValue=BIT6;
4439 write_reg(info, RXS, RegValue);
4440
4441 /* TXS, Transmit clock source
4442 *
4443 * 07 Reserved, must be 0
4444 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4445 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4446 */
4447 RegValue=BIT6;
4448 write_reg(info, TXS, RegValue);
4449
4450 /* Control Register
4451 *
4452 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4453 */
4454 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4455 write_control_reg(info);
4456
4457 tx_set_idle(info);
4458
4459 /* RRC Receive Ready Control 0
4460 *
4461 * 07..05 Reserved, must be 0
4462 * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
4463 */
4464 write_reg(info, RRC, 0x00);
4465
4466 /* TRC0 Transmit Ready Control 0
4467 *
4468 * 07..05 Reserved, must be 0
4469 * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
4470 */
4471 write_reg(info, TRC0, 0x10);
4472
4473 /* TRC1 Transmit Ready Control 1
4474 *
4475 * 07..05 Reserved, must be 0
4476 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
4477 */
4478 write_reg(info, TRC1, 0x1e);
4479
4480 /* CTL, MSCI control register
4481 *
4482 * 07..06 Reserved, set to 0
4483 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4484 * 04 IDLC, idle control, 0=mark 1=idle register
4485 * 03 BRK, break, 0=off 1 =on (async)
4486 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4487 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4488 * 00 RTS, RTS output control, 0=active 1=inactive
4489 *
4490 * 0001 0001
4491 */
4492 RegValue = 0x10;
4493 if (!(info->serial_signals & SerialSignal_RTS))
4494 RegValue |= 0x01;
4495 write_reg(info, CTL, RegValue);
4496
4497 /* enable status interrupts */
4498 info->ie0_value |= TXINTE + RXINTE;
4499 write_reg(info, IE0, info->ie0_value);
4500
4501 /* enable break detect interrupt */
4502 info->ie1_value = BRKD;
4503 write_reg(info, IE1, info->ie1_value);
4504
4505 /* enable rx overrun interrupt */
4506 info->ie2_value = OVRN;
4507 write_reg(info, IE2, info->ie2_value);
4508
4509 set_rate( info, info->params.data_rate * 16 );
4510}
4511
4512/* Program the SCA for HDLC communications.
4513 */
4514static void hdlc_mode(SLMP_INFO *info)
4515{
4516 unsigned char RegValue;
4517 u32 DpllDivisor;
4518
4519 // Can't use DPLL because SCA outputs recovered clock on RxC when
4520 // DPLL mode selected. This causes output contention with RxC receiver.
4521 // Use of DPLL would require external hardware to disable RxC receiver
4522 // when DPLL mode selected.
4523 info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
4524
4525 /* disable DMA interrupts */
4526 write_reg(info, TXDMA + DIR, 0);
4527 write_reg(info, RXDMA + DIR, 0);
4528
4529 /* MD0, Mode Register 0
4530 *
4531 * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC
4532 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4533 * 03 Reserved, must be 0
4534 * 02 CRCCC, CRC Calculation, 1=enabled
4535 * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
4536 * 00 CRC0, CRC initial value, 1 = all 1s
4537 *
4538 * 1000 0001
4539 */
4540 RegValue = 0x81;
4541 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4542 RegValue |= BIT4;
4543 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4544 RegValue |= BIT4;
4545 if (info->params.crc_type == HDLC_CRC_16_CCITT)
4546 RegValue |= BIT2 + BIT1;
4547 write_reg(info, MD0, RegValue);
4548
4549 /* MD1, Mode Register 1
4550 *
4551 * 07..06 ADDRS<1..0>, Address detect, 00=no addr check
4552 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits
4553 * 03..02 RXCHR<1..0>, rx char size, 00=8 bits
4554 * 01..00 PMPM<1..0>, Parity mode, 00=no parity
4555 *
4556 * 0000 0000
4557 */
4558 RegValue = 0x00;
4559 write_reg(info, MD1, RegValue);
4560
4561 /* MD2, Mode Register 2
4562 *
4563 * 07 NRZFM, 0=NRZ, 1=FM
4564 * 06..05 CODE<1..0> Encoding, 00=NRZ
4565 * 04..03 DRATE<1..0> DPLL Divisor, 00=8
4566 * 02 Reserved, must be 0
4567 * 01..00 CNCT<1..0> Channel connection, 0=normal
4568 *
4569 * 0000 0000
4570 */
4571 RegValue = 0x00;
4572 switch(info->params.encoding) {
4573 case HDLC_ENCODING_NRZI: RegValue |= BIT5; break;
4574 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */
4575 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
4576 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */
4577#if 0
4578 case HDLC_ENCODING_NRZB: /* not supported */
4579 case HDLC_ENCODING_NRZI_MARK: /* not supported */
4580 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */
4581#endif
4582 }
4583 if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4584 DpllDivisor = 16;
4585 RegValue |= BIT3;
4586 } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4587 DpllDivisor = 8;
4588 } else {
4589 DpllDivisor = 32;
4590 RegValue |= BIT4;
4591 }
4592 write_reg(info, MD2, RegValue);
4593
4594
4595 /* RXS, Receive clock source
4596 *
4597 * 07 Reserved, must be 0
4598 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4599 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4600 */
4601 RegValue=0;
4602 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4603 RegValue |= BIT6;
4604 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4605 RegValue |= BIT6 + BIT5;
4606 write_reg(info, RXS, RegValue);
4607
4608 /* TXS, Transmit clock source
4609 *
4610 * 07 Reserved, must be 0
4611 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4612 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4613 */
4614 RegValue=0;
4615 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4616 RegValue |= BIT6;
4617 if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4618 RegValue |= BIT6 + BIT5;
4619 write_reg(info, TXS, RegValue);
4620
4621 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4622 set_rate(info, info->params.clock_speed * DpllDivisor);
4623 else
4624 set_rate(info, info->params.clock_speed);
4625
4626 /* GPDATA (General Purpose I/O Data Register)
4627 *
4628 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4629 */
4630 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4631 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4632 else
4633 info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
4634 write_control_reg(info);
4635
4636 /* RRC Receive Ready Control 0
4637 *
4638 * 07..05 Reserved, must be 0
4639 * 04..00 RRC<4..0> Rx FIFO trigger active
4640 */
4641 write_reg(info, RRC, rx_active_fifo_level);
4642
4643 /* TRC0 Transmit Ready Control 0
4644 *
4645 * 07..05 Reserved, must be 0
4646 * 04..00 TRC<4..0> Tx FIFO trigger active
4647 */
4648 write_reg(info, TRC0, tx_active_fifo_level);
4649
4650 /* TRC1 Transmit Ready Control 1
4651 *
4652 * 07..05 Reserved, must be 0
4653 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
4654 */
4655 write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
4656
4657 /* DMR, DMA Mode Register
4658 *
4659 * 07..05 Reserved, must be 0
4660 * 04 TMOD, Transfer Mode: 1=chained-block
4661 * 03 Reserved, must be 0
4662 * 02 NF, Number of Frames: 1=multi-frame
4663 * 01 CNTE, Frame End IRQ Counter enable: 0=disabled
4664 * 00 Reserved, must be 0
4665 *
4666 * 0001 0100
4667 */
4668 write_reg(info, TXDMA + DMR, 0x14);
4669 write_reg(info, RXDMA + DMR, 0x14);
4670
4671 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4672 write_reg(info, RXDMA + CPB,
4673 (unsigned char)(info->buffer_list_phys >> 16));
4674
4675 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4676 write_reg(info, TXDMA + CPB,
4677 (unsigned char)(info->buffer_list_phys >> 16));
4678
4679 /* enable status interrupts. other code enables/disables
4680 * the individual sources for these two interrupt classes.
4681 */
4682 info->ie0_value |= TXINTE + RXINTE;
4683 write_reg(info, IE0, info->ie0_value);
4684
4685 /* CTL, MSCI control register
4686 *
4687 * 07..06 Reserved, set to 0
4688 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4689 * 04 IDLC, idle control, 0=mark 1=idle register
4690 * 03 BRK, break, 0=off 1 =on (async)
4691 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4692 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4693 * 00 RTS, RTS output control, 0=active 1=inactive
4694 *
4695 * 0001 0001
4696 */
4697 RegValue = 0x10;
4698 if (!(info->serial_signals & SerialSignal_RTS))
4699 RegValue |= 0x01;
4700 write_reg(info, CTL, RegValue);
4701
4702 /* preamble not supported ! */
4703
4704 tx_set_idle(info);
4705 tx_stop(info);
4706 rx_stop(info);
4707
4708 set_rate(info, info->params.clock_speed);
4709
4710 if (info->params.loopback)
4711 enable_loopback(info,1);
4712}
4713
4714/* Set the transmit HDLC idle mode
4715 */
4716static void tx_set_idle(SLMP_INFO *info)
4717{
4718 unsigned char RegValue = 0xff;
4719
4720 /* Map API idle mode to SCA register bits */
4721 switch(info->idle_mode) {
4722 case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break;
4723 case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break;
4724 case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break;
4725 case HDLC_TXIDLE_ONES: RegValue = 0xff; break;
4726 case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break;
4727 case HDLC_TXIDLE_SPACE: RegValue = 0x00; break;
4728 case HDLC_TXIDLE_MARK: RegValue = 0xff; break;
4729 }
4730
4731 write_reg(info, IDL, RegValue);
4732}
4733
4734/* Query the adapter for the state of the V24 status (input) signals.
4735 */
4736static void get_signals(SLMP_INFO *info)
4737{
4738 u16 status = read_reg(info, SR3);
4739 u16 gpstatus = read_status_reg(info);
4740 u16 testbit;
4741
4742 /* clear all serial signals except RTS and DTR */
4743 info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
4744
4745 /* set serial signal bits to reflect MISR */
4746
4747 if (!(status & BIT3))
4748 info->serial_signals |= SerialSignal_CTS;
4749
4750 if ( !(status & BIT2))
4751 info->serial_signals |= SerialSignal_DCD;
4752
4753 testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
4754 if (!(gpstatus & testbit))
4755 info->serial_signals |= SerialSignal_RI;
4756
4757 testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
4758 if (!(gpstatus & testbit))
4759 info->serial_signals |= SerialSignal_DSR;
4760}
4761
4762/* Set the state of RTS and DTR based on contents of
4763 * serial_signals member of device context.
4764 */
4765static void set_signals(SLMP_INFO *info)
4766{
4767 unsigned char RegValue;
4768 u16 EnableBit;
4769
4770 RegValue = read_reg(info, CTL);
4771 if (info->serial_signals & SerialSignal_RTS)
4772 RegValue &= ~BIT0;
4773 else
4774 RegValue |= BIT0;
4775 write_reg(info, CTL, RegValue);
4776
4777 // Port 0..3 DTR is ctrl reg <1,3,5,7>
4778 EnableBit = BIT1 << (info->port_num*2);
4779 if (info->serial_signals & SerialSignal_DTR)
4780 info->port_array[0]->ctrlreg_value &= ~EnableBit;
4781 else
4782 info->port_array[0]->ctrlreg_value |= EnableBit;
4783 write_control_reg(info);
4784}
4785
4786/*******************/
4787/* DMA Buffer Code */
4788/*******************/
4789
4790/* Set the count for all receive buffers to SCABUFSIZE
4791 * and set the current buffer to the first buffer. This effectively
4792 * makes all buffers free and discards any data in buffers.
4793 */
4794static void rx_reset_buffers(SLMP_INFO *info)
4795{
4796 rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
4797}
4798
4799/* Free the buffers used by a received frame
4800 *
4801 * info pointer to device instance data
4802 * first index of 1st receive buffer of frame
4803 * last index of last receive buffer of frame
4804 */
4805static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
4806{
4807 bool done = false;
4808
4809 while(!done) {
4810 /* reset current buffer for reuse */
4811 info->rx_buf_list[first].status = 0xff;
4812
4813 if (first == last) {
4814 done = true;
4815 /* set new last rx descriptor address */
4816 write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
4817 }
4818
4819 first++;
4820 if (first == info->rx_buf_count)
4821 first = 0;
4822 }
4823
4824 /* set current buffer to next buffer after last buffer of frame */
4825 info->current_rx_buf = first;
4826}
4827
4828/* Return a received frame from the receive DMA buffers.
4829 * Only frames received without errors are returned.
4830 *
4831 * Return Value: true if frame returned, otherwise false
4832 */
4833static bool rx_get_frame(SLMP_INFO *info)
4834{
4835 unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
4836 unsigned short status;
4837 unsigned int framesize = 0;
4838 bool ReturnCode = false;
4839 unsigned long flags;
4840 struct tty_struct *tty = info->port.tty;
4841 unsigned char addr_field = 0xff;
4842 SCADESC *desc;
4843 SCADESC_EX *desc_ex;
4844
4845CheckAgain:
4846 /* assume no frame returned, set zero length */
4847 framesize = 0;
4848 addr_field = 0xff;
4849
4850 /*
4851 * current_rx_buf points to the 1st buffer of the next available
4852 * receive frame. To find the last buffer of the frame look for
4853 * a non-zero status field in the buffer entries. (The status
4854 * field is set by the 16C32 after completing a receive frame.
4855 */
4856 StartIndex = EndIndex = info->current_rx_buf;
4857
4858 for ( ;; ) {
4859 desc = &info->rx_buf_list[EndIndex];
4860 desc_ex = &info->rx_buf_list_ex[EndIndex];
4861
4862 if (desc->status == 0xff)
4863 goto Cleanup; /* current desc still in use, no frames available */
4864
4865 if (framesize == 0 && info->params.addr_filter != 0xff)
4866 addr_field = desc_ex->virt_addr[0];
4867
4868 framesize += desc->length;
4869
4870 /* Status != 0 means last buffer of frame */
4871 if (desc->status)
4872 break;
4873
4874 EndIndex++;
4875 if (EndIndex == info->rx_buf_count)
4876 EndIndex = 0;
4877
4878 if (EndIndex == info->current_rx_buf) {
4879 /* all buffers have been 'used' but none mark */
4880 /* the end of a frame. Reset buffers and receiver. */
4881 if ( info->rx_enabled ){
4882 spin_lock_irqsave(&info->lock,flags);
4883 rx_start(info);
4884 spin_unlock_irqrestore(&info->lock,flags);
4885 }
4886 goto Cleanup;
4887 }
4888
4889 }
4890
4891 /* check status of receive frame */
4892
4893 /* frame status is byte stored after frame data
4894 *
4895 * 7 EOM (end of msg), 1 = last buffer of frame
4896 * 6 Short Frame, 1 = short frame
4897 * 5 Abort, 1 = frame aborted
4898 * 4 Residue, 1 = last byte is partial
4899 * 3 Overrun, 1 = overrun occurred during frame reception
4900 * 2 CRC, 1 = CRC error detected
4901 *
4902 */
4903 status = desc->status;
4904
4905 /* ignore CRC bit if not using CRC (bit is undefined) */
4906 /* Note:CRC is not save to data buffer */
4907 if (info->params.crc_type == HDLC_CRC_NONE)
4908 status &= ~BIT2;
4909
4910 if (framesize == 0 ||
4911 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4912 /* discard 0 byte frames, this seems to occur sometime
4913 * when remote is idling flags.
4914 */
4915 rx_free_frame_buffers(info, StartIndex, EndIndex);
4916 goto CheckAgain;
4917 }
4918
4919 if (framesize < 2)
4920 status |= BIT6;
4921
4922 if (status & (BIT6+BIT5+BIT3+BIT2)) {
4923 /* received frame has errors,
4924 * update counts and mark frame size as 0
4925 */
4926 if (status & BIT6)
4927 info->icount.rxshort++;
4928 else if (status & BIT5)
4929 info->icount.rxabort++;
4930 else if (status & BIT3)
4931 info->icount.rxover++;
4932 else
4933 info->icount.rxcrc++;
4934
4935 framesize = 0;
4936#if SYNCLINK_GENERIC_HDLC
4937 {
4938 info->netdev->stats.rx_errors++;
4939 info->netdev->stats.rx_frame_errors++;
4940 }
4941#endif
4942 }
4943
4944 if ( debug_level >= DEBUG_LEVEL_BH )
4945 printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
4946 __FILE__,__LINE__,info->device_name,status,framesize);
4947
4948 if ( debug_level >= DEBUG_LEVEL_DATA )
4949 trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
4950 min_t(unsigned int, framesize, SCABUFSIZE), 0);
4951
4952 if (framesize) {
4953 if (framesize > info->max_frame_size)
4954 info->icount.rxlong++;
4955 else {
4956 /* copy dma buffer(s) to contiguous intermediate buffer */
4957 int copy_count = framesize;
4958 int index = StartIndex;
4959 unsigned char *ptmp = info->tmp_rx_buf;
4960 info->tmp_rx_buf_count = framesize;
4961
4962 info->icount.rxok++;
4963
4964 while(copy_count) {
4965 int partial_count = min(copy_count,SCABUFSIZE);
4966 memcpy( ptmp,
4967 info->rx_buf_list_ex[index].virt_addr,
4968 partial_count );
4969 ptmp += partial_count;
4970 copy_count -= partial_count;
4971
4972 if ( ++index == info->rx_buf_count )
4973 index = 0;
4974 }
4975
4976#if SYNCLINK_GENERIC_HDLC
4977 if (info->netcount)
4978 hdlcdev_rx(info,info->tmp_rx_buf,framesize);
4979 else
4980#endif
4981 ldisc_receive_buf(tty,info->tmp_rx_buf,
4982 info->flag_buf, framesize);
4983 }
4984 }
4985 /* Free the buffers used by this frame. */
4986 rx_free_frame_buffers( info, StartIndex, EndIndex );
4987
4988 ReturnCode = true;
4989
4990Cleanup:
4991 if ( info->rx_enabled && info->rx_overflow ) {
4992 /* Receiver is enabled, but needs to restarted due to
4993 * rx buffer overflow. If buffers are empty, restart receiver.
4994 */
4995 if (info->rx_buf_list[EndIndex].status == 0xff) {
4996 spin_lock_irqsave(&info->lock,flags);
4997 rx_start(info);
4998 spin_unlock_irqrestore(&info->lock,flags);
4999 }
5000 }
5001
5002 return ReturnCode;
5003}
5004
5005/* load the transmit DMA buffer with data
5006 */
5007static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
5008{
5009 unsigned short copy_count;
5010 unsigned int i = 0;
5011 SCADESC *desc;
5012 SCADESC_EX *desc_ex;
5013
5014 if ( debug_level >= DEBUG_LEVEL_DATA )
5015 trace_block(info, buf, min_t(unsigned int, count, SCABUFSIZE), 1);
5016
5017 /* Copy source buffer to one or more DMA buffers, starting with
5018 * the first transmit dma buffer.
5019 */
5020 for(i=0;;)
5021 {
5022 copy_count = min_t(unsigned int, count, SCABUFSIZE);
5023
5024 desc = &info->tx_buf_list[i];
5025 desc_ex = &info->tx_buf_list_ex[i];
5026
5027 load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
5028
5029 desc->length = copy_count;
5030 desc->status = 0;
5031
5032 buf += copy_count;
5033 count -= copy_count;
5034
5035 if (!count)
5036 break;
5037
5038 i++;
5039 if (i >= info->tx_buf_count)
5040 i = 0;
5041 }
5042
5043 info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */
5044 info->last_tx_buf = ++i;
5045}
5046
5047static bool register_test(SLMP_INFO *info)
5048{
5049 static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
5050 static unsigned int count = ARRAY_SIZE(testval);
5051 unsigned int i;
5052 bool rc = true;
5053 unsigned long flags;
5054
5055 spin_lock_irqsave(&info->lock,flags);
5056 reset_port(info);
5057
5058 /* assume failure */
5059 info->init_error = DiagStatus_AddressFailure;
5060
5061 /* Write bit patterns to various registers but do it out of */
5062 /* sync, then read back and verify values. */
5063
5064 for (i = 0 ; i < count ; i++) {
5065 write_reg(info, TMC, testval[i]);
5066 write_reg(info, IDL, testval[(i+1)%count]);
5067 write_reg(info, SA0, testval[(i+2)%count]);
5068 write_reg(info, SA1, testval[(i+3)%count]);
5069
5070 if ( (read_reg(info, TMC) != testval[i]) ||
5071 (read_reg(info, IDL) != testval[(i+1)%count]) ||
5072 (read_reg(info, SA0) != testval[(i+2)%count]) ||
5073 (read_reg(info, SA1) != testval[(i+3)%count]) )
5074 {
5075 rc = false;
5076 break;
5077 }
5078 }
5079
5080 reset_port(info);
5081 spin_unlock_irqrestore(&info->lock,flags);
5082
5083 return rc;
5084}
5085
5086static bool irq_test(SLMP_INFO *info)
5087{
5088 unsigned long timeout;
5089 unsigned long flags;
5090
5091 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
5092
5093 spin_lock_irqsave(&info->lock,flags);
5094 reset_port(info);
5095
5096 /* assume failure */
5097 info->init_error = DiagStatus_IrqFailure;
5098 info->irq_occurred = false;
5099
5100 /* setup timer0 on SCA0 to interrupt */
5101
5102 /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
5103 write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
5104
5105 write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */
5106 write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */
5107
5108
5109 /* TMCS, Timer Control/Status Register
5110 *
5111 * 07 CMF, Compare match flag (read only) 1=match
5112 * 06 ECMI, CMF Interrupt Enable: 1=enabled
5113 * 05 Reserved, must be 0
5114 * 04 TME, Timer Enable
5115 * 03..00 Reserved, must be 0
5116 *
5117 * 0101 0000
5118 */
5119 write_reg(info, (unsigned char)(timer + TMCS), 0x50);
5120
5121 spin_unlock_irqrestore(&info->lock,flags);
5122
5123 timeout=100;
5124 while( timeout-- && !info->irq_occurred ) {
5125 msleep_interruptible(10);
5126 }
5127
5128 spin_lock_irqsave(&info->lock,flags);
5129 reset_port(info);
5130 spin_unlock_irqrestore(&info->lock,flags);
5131
5132 return info->irq_occurred;
5133}
5134
5135/* initialize individual SCA device (2 ports)
5136 */
5137static bool sca_init(SLMP_INFO *info)
5138{
5139 /* set wait controller to single mem partition (low), no wait states */
5140 write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */
5141 write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */
5142 write_reg(info, WCRL, 0); /* wait controller low range */
5143 write_reg(info, WCRM, 0); /* wait controller mid range */
5144 write_reg(info, WCRH, 0); /* wait controller high range */
5145
5146 /* DPCR, DMA Priority Control
5147 *
5148 * 07..05 Not used, must be 0
5149 * 04 BRC, bus release condition: 0=all transfers complete
5150 * 03 CCC, channel change condition: 0=every cycle
5151 * 02..00 PR<2..0>, priority 100=round robin
5152 *
5153 * 00000100 = 0x04
5154 */
5155 write_reg(info, DPCR, dma_priority);
5156
5157 /* DMA Master Enable, BIT7: 1=enable all channels */
5158 write_reg(info, DMER, 0x80);
5159
5160 /* enable all interrupt classes */
5161 write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
5162 write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */
5163 write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */
5164
5165 /* ITCR, interrupt control register
5166 * 07 IPC, interrupt priority, 0=MSCI->DMA
5167 * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
5168 * 04 VOS, Vector Output, 0=unmodified vector
5169 * 03..00 Reserved, must be 0
5170 */
5171 write_reg(info, ITCR, 0);
5172
5173 return true;
5174}
5175
5176/* initialize adapter hardware
5177 */
5178static bool init_adapter(SLMP_INFO *info)
5179{
5180 int i;
5181
5182 /* Set BIT30 of Local Control Reg 0x50 to reset SCA */
5183 volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5184 u32 readval;
5185
5186 info->misc_ctrl_value |= BIT30;
5187 *MiscCtrl = info->misc_ctrl_value;
5188
5189 /*
5190 * Force at least 170ns delay before clearing
5191 * reset bit. Each read from LCR takes at least
5192 * 30ns so 10 times for 300ns to be safe.
5193 */
5194 for(i=0;i<10;i++)
5195 readval = *MiscCtrl;
5196
5197 info->misc_ctrl_value &= ~BIT30;
5198 *MiscCtrl = info->misc_ctrl_value;
5199
5200 /* init control reg (all DTRs off, all clksel=input) */
5201 info->ctrlreg_value = 0xaa;
5202 write_control_reg(info);
5203
5204 {
5205 volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
5206 lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
5207
5208 switch(read_ahead_count)
5209 {
5210 case 16:
5211 lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
5212 break;
5213 case 8:
5214 lcr1_brdr_value |= BIT5 + BIT4;
5215 break;
5216 case 4:
5217 lcr1_brdr_value |= BIT5 + BIT3;
5218 break;
5219 case 0:
5220 lcr1_brdr_value |= BIT5;
5221 break;
5222 }
5223
5224 *LCR1BRDR = lcr1_brdr_value;
5225 *MiscCtrl = misc_ctrl_value;
5226 }
5227
5228 sca_init(info->port_array[0]);
5229 sca_init(info->port_array[2]);
5230
5231 return true;
5232}
5233
5234/* Loopback an HDLC frame to test the hardware
5235 * interrupt and DMA functions.
5236 */
5237static bool loopback_test(SLMP_INFO *info)
5238{
5239#define TESTFRAMESIZE 20
5240
5241 unsigned long timeout;
5242 u16 count = TESTFRAMESIZE;
5243 unsigned char buf[TESTFRAMESIZE];
5244 bool rc = false;
5245 unsigned long flags;
5246
5247 struct tty_struct *oldtty = info->port.tty;
5248 u32 speed = info->params.clock_speed;
5249
5250 info->params.clock_speed = 3686400;
5251 info->port.tty = NULL;
5252
5253 /* assume failure */
5254 info->init_error = DiagStatus_DmaFailure;
5255
5256 /* build and send transmit frame */
5257 for (count = 0; count < TESTFRAMESIZE;++count)
5258 buf[count] = (unsigned char)count;
5259
5260 memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
5261
5262 /* program hardware for HDLC and enabled receiver */
5263 spin_lock_irqsave(&info->lock,flags);
5264 hdlc_mode(info);
5265 enable_loopback(info,1);
5266 rx_start(info);
5267 info->tx_count = count;
5268 tx_load_dma_buffer(info,buf,count);
5269 tx_start(info);
5270 spin_unlock_irqrestore(&info->lock,flags);
5271
5272 /* wait for receive complete */
5273 /* Set a timeout for waiting for interrupt. */
5274 for ( timeout = 100; timeout; --timeout ) {
5275 msleep_interruptible(10);
5276
5277 if (rx_get_frame(info)) {
5278 rc = true;
5279 break;
5280 }
5281 }
5282
5283 /* verify received frame length and contents */
5284 if (rc &&
5285 ( info->tmp_rx_buf_count != count ||
5286 memcmp(buf, info->tmp_rx_buf,count))) {
5287 rc = false;
5288 }
5289
5290 spin_lock_irqsave(&info->lock,flags);
5291 reset_adapter(info);
5292 spin_unlock_irqrestore(&info->lock,flags);
5293
5294 info->params.clock_speed = speed;
5295 info->port.tty = oldtty;
5296
5297 return rc;
5298}
5299
5300/* Perform diagnostics on hardware
5301 */
5302static int adapter_test( SLMP_INFO *info )
5303{
5304 unsigned long flags;
5305 if ( debug_level >= DEBUG_LEVEL_INFO )
5306 printk( "%s(%d):Testing device %s\n",
5307 __FILE__,__LINE__,info->device_name );
5308
5309 spin_lock_irqsave(&info->lock,flags);
5310 init_adapter(info);
5311 spin_unlock_irqrestore(&info->lock,flags);
5312
5313 info->port_array[0]->port_count = 0;
5314
5315 if ( register_test(info->port_array[0]) &&
5316 register_test(info->port_array[1])) {
5317
5318 info->port_array[0]->port_count = 2;
5319
5320 if ( register_test(info->port_array[2]) &&
5321 register_test(info->port_array[3]) )
5322 info->port_array[0]->port_count += 2;
5323 }
5324 else {
5325 printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
5326 __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
5327 return -ENODEV;
5328 }
5329
5330 if ( !irq_test(info->port_array[0]) ||
5331 !irq_test(info->port_array[1]) ||
5332 (info->port_count == 4 && !irq_test(info->port_array[2])) ||
5333 (info->port_count == 4 && !irq_test(info->port_array[3]))) {
5334 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
5335 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
5336 return -ENODEV;
5337 }
5338
5339 if (!loopback_test(info->port_array[0]) ||
5340 !loopback_test(info->port_array[1]) ||
5341 (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
5342 (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
5343 printk( "%s(%d):DMA test failure for device %s\n",
5344 __FILE__,__LINE__,info->device_name);
5345 return -ENODEV;
5346 }
5347
5348 if ( debug_level >= DEBUG_LEVEL_INFO )
5349 printk( "%s(%d):device %s passed diagnostics\n",
5350 __FILE__,__LINE__,info->device_name );
5351
5352 info->port_array[0]->init_error = 0;
5353 info->port_array[1]->init_error = 0;
5354 if ( info->port_count > 2 ) {
5355 info->port_array[2]->init_error = 0;
5356 info->port_array[3]->init_error = 0;
5357 }
5358
5359 return 0;
5360}
5361
5362/* Test the shared memory on a PCI adapter.
5363 */
5364static bool memory_test(SLMP_INFO *info)
5365{
5366 static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
5367 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
5368 unsigned long count = ARRAY_SIZE(testval);
5369 unsigned long i;
5370 unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
5371 unsigned long * addr = (unsigned long *)info->memory_base;
5372
5373 /* Test data lines with test pattern at one location. */
5374
5375 for ( i = 0 ; i < count ; i++ ) {
5376 *addr = testval[i];
5377 if ( *addr != testval[i] )
5378 return false;
5379 }
5380
5381 /* Test address lines with incrementing pattern over */
5382 /* entire address range. */
5383
5384 for ( i = 0 ; i < limit ; i++ ) {
5385 *addr = i * 4;
5386 addr++;
5387 }
5388
5389 addr = (unsigned long *)info->memory_base;
5390
5391 for ( i = 0 ; i < limit ; i++ ) {
5392 if ( *addr != i * 4 )
5393 return false;
5394 addr++;
5395 }
5396
5397 memset( info->memory_base, 0, SCA_MEM_SIZE );
5398 return true;
5399}
5400
5401/* Load data into PCI adapter shared memory.
5402 *
5403 * The PCI9050 releases control of the local bus
5404 * after completing the current read or write operation.
5405 *
5406 * While the PCI9050 write FIFO not empty, the
5407 * PCI9050 treats all of the writes as a single transaction
5408 * and does not release the bus. This causes DMA latency problems
5409 * at high speeds when copying large data blocks to the shared memory.
5410 *
5411 * This function breaks a write into multiple transations by
5412 * interleaving a read which flushes the write FIFO and 'completes'
5413 * the write transation. This allows any pending DMA request to gain control
5414 * of the local bus in a timely fasion.
5415 */
5416static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
5417{
5418 /* A load interval of 16 allows for 4 32-bit writes at */
5419 /* 136ns each for a maximum latency of 542ns on the local bus.*/
5420
5421 unsigned short interval = count / sca_pci_load_interval;
5422 unsigned short i;
5423
5424 for ( i = 0 ; i < interval ; i++ )
5425 {
5426 memcpy(dest, src, sca_pci_load_interval);
5427 read_status_reg(info);
5428 dest += sca_pci_load_interval;
5429 src += sca_pci_load_interval;
5430 }
5431
5432 memcpy(dest, src, count % sca_pci_load_interval);
5433}
5434
5435static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
5436{
5437 int i;
5438 int linecount;
5439 if (xmit)
5440 printk("%s tx data:\n",info->device_name);
5441 else
5442 printk("%s rx data:\n",info->device_name);
5443
5444 while(count) {
5445 if (count > 16)
5446 linecount = 16;
5447 else
5448 linecount = count;
5449
5450 for(i=0;i<linecount;i++)
5451 printk("%02X ",(unsigned char)data[i]);
5452 for(;i<17;i++)
5453 printk(" ");
5454 for(i=0;i<linecount;i++) {
5455 if (data[i]>=040 && data[i]<=0176)
5456 printk("%c",data[i]);
5457 else
5458 printk(".");
5459 }
5460 printk("\n");
5461
5462 data += linecount;
5463 count -= linecount;
5464 }
5465} /* end of trace_block() */
5466
5467/* called when HDLC frame times out
5468 * update stats and do tx completion processing
5469 */
5470static void tx_timeout(struct timer_list *t)
5471{
5472 SLMP_INFO *info = from_timer(info, t, tx_timer);
5473 unsigned long flags;
5474
5475 if ( debug_level >= DEBUG_LEVEL_INFO )
5476 printk( "%s(%d):%s tx_timeout()\n",
5477 __FILE__,__LINE__,info->device_name);
5478 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5479 info->icount.txtimeout++;
5480 }
5481 spin_lock_irqsave(&info->lock,flags);
5482 info->tx_active = false;
5483 info->tx_count = info->tx_put = info->tx_get = 0;
5484
5485 spin_unlock_irqrestore(&info->lock,flags);
5486
5487#if SYNCLINK_GENERIC_HDLC
5488 if (info->netcount)
5489 hdlcdev_tx_done(info);
5490 else
5491#endif
5492 bh_transmit(info);
5493}
5494
5495/* called to periodically check the DSR/RI modem signal input status
5496 */
5497static void status_timeout(struct timer_list *t)
5498{
5499 u16 status = 0;
5500 SLMP_INFO *info = from_timer(info, t, status_timer);
5501 unsigned long flags;
5502 unsigned char delta;
5503
5504
5505 spin_lock_irqsave(&info->lock,flags);
5506 get_signals(info);
5507 spin_unlock_irqrestore(&info->lock,flags);
5508
5509 /* check for DSR/RI state change */
5510
5511 delta = info->old_signals ^ info->serial_signals;
5512 info->old_signals = info->serial_signals;
5513
5514 if (delta & SerialSignal_DSR)
5515 status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
5516
5517 if (delta & SerialSignal_RI)
5518 status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
5519
5520 if (delta & SerialSignal_DCD)
5521 status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
5522
5523 if (delta & SerialSignal_CTS)
5524 status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
5525
5526 if (status)
5527 isr_io_pin(info,status);
5528
5529 mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
5530}
5531
5532
5533/* Register Access Routines -
5534 * All registers are memory mapped
5535 */
5536#define CALC_REGADDR() \
5537 unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
5538 if (info->port_num > 1) \
5539 RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \
5540 if ( info->port_num & 1) { \
5541 if (Addr > 0x7f) \
5542 RegAddr += 0x40; /* DMA access */ \
5543 else if (Addr > 0x1f && Addr < 0x60) \
5544 RegAddr += 0x20; /* MSCI access */ \
5545 }
5546
5547
5548static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
5549{
5550 CALC_REGADDR();
5551 return *RegAddr;
5552}
5553static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
5554{
5555 CALC_REGADDR();
5556 *RegAddr = Value;
5557}
5558
5559static u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
5560{
5561 CALC_REGADDR();
5562 return *((u16 *)RegAddr);
5563}
5564
5565static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
5566{
5567 CALC_REGADDR();
5568 *((u16 *)RegAddr) = Value;
5569}
5570
5571static unsigned char read_status_reg(SLMP_INFO * info)
5572{
5573 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5574 return *RegAddr;
5575}
5576
5577static void write_control_reg(SLMP_INFO * info)
5578{
5579 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5580 *RegAddr = info->port_array[0]->ctrlreg_value;
5581}
5582
5583
5584static int synclinkmp_init_one (struct pci_dev *dev,
5585 const struct pci_device_id *ent)
5586{
5587 if (pci_enable_device(dev)) {
5588 printk("error enabling pci device %p\n", dev);
5589 return -EIO;
5590 }
5591 return device_init( ++synclinkmp_adapter_count, dev );
5592}
5593
5594static void synclinkmp_remove_one (struct pci_dev *dev)
5595{
5596}