Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Cadence UART driver (found in Xilinx Zynq)
4 *
5 * 2011 - 2014 (C) Xilinx Inc.
6 *
7 * This driver has originally been pushed by Xilinx using a Zynq-branding. This
8 * still shows in the naming of this file, the kconfig symbols and some symbols
9 * in the code.
10 */
11
12#include <linux/platform_device.h>
13#include <linux/serial.h>
14#include <linux/console.h>
15#include <linux/serial_core.h>
16#include <linux/slab.h>
17#include <linux/tty.h>
18#include <linux/tty_flip.h>
19#include <linux/clk.h>
20#include <linux/irq.h>
21#include <linux/io.h>
22#include <linux/of.h>
23#include <linux/module.h>
24#include <linux/pm_runtime.h>
25#include <linux/iopoll.h>
26
27#define CDNS_UART_TTY_NAME "ttyPS"
28#define CDNS_UART_NAME "xuartps"
29#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */
30#define CDNS_UART_MINOR 0 /* works best with devtmpfs */
31#define CDNS_UART_NR_PORTS 16
32#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */
33#define CDNS_UART_REGISTER_SPACE 0x1000
34#define TX_TIMEOUT 500000
35
36/* Rx Trigger level */
37static int rx_trigger_level = 56;
38module_param(rx_trigger_level, uint, 0444);
39MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
40
41/* Rx Timeout */
42static int rx_timeout = 10;
43module_param(rx_timeout, uint, 0444);
44MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
45
46/* Register offsets for the UART. */
47#define CDNS_UART_CR 0x00 /* Control Register */
48#define CDNS_UART_MR 0x04 /* Mode Register */
49#define CDNS_UART_IER 0x08 /* Interrupt Enable */
50#define CDNS_UART_IDR 0x0C /* Interrupt Disable */
51#define CDNS_UART_IMR 0x10 /* Interrupt Mask */
52#define CDNS_UART_ISR 0x14 /* Interrupt Status */
53#define CDNS_UART_BAUDGEN 0x18 /* Baud Rate Generator */
54#define CDNS_UART_RXTOUT 0x1C /* RX Timeout */
55#define CDNS_UART_RXWM 0x20 /* RX FIFO Trigger Level */
56#define CDNS_UART_MODEMCR 0x24 /* Modem Control */
57#define CDNS_UART_MODEMSR 0x28 /* Modem Status */
58#define CDNS_UART_SR 0x2C /* Channel Status */
59#define CDNS_UART_FIFO 0x30 /* FIFO */
60#define CDNS_UART_BAUDDIV 0x34 /* Baud Rate Divider */
61#define CDNS_UART_FLOWDEL 0x38 /* Flow Delay */
62#define CDNS_UART_IRRX_PWIDTH 0x3C /* IR Min Received Pulse Width */
63#define CDNS_UART_IRTX_PWIDTH 0x40 /* IR Transmitted pulse Width */
64#define CDNS_UART_TXWM 0x44 /* TX FIFO Trigger Level */
65#define CDNS_UART_RXBS 0x48 /* RX FIFO byte status register */
66
67/* Control Register Bit Definitions */
68#define CDNS_UART_CR_STOPBRK 0x00000100 /* Stop TX break */
69#define CDNS_UART_CR_STARTBRK 0x00000080 /* Set TX break */
70#define CDNS_UART_CR_TX_DIS 0x00000020 /* TX disabled. */
71#define CDNS_UART_CR_TX_EN 0x00000010 /* TX enabled */
72#define CDNS_UART_CR_RX_DIS 0x00000008 /* RX disabled. */
73#define CDNS_UART_CR_RX_EN 0x00000004 /* RX enabled */
74#define CDNS_UART_CR_TXRST 0x00000002 /* TX logic reset */
75#define CDNS_UART_CR_RXRST 0x00000001 /* RX logic reset */
76#define CDNS_UART_CR_RST_TO 0x00000040 /* Restart Timeout Counter */
77#define CDNS_UART_RXBS_PARITY 0x00000001 /* Parity error status */
78#define CDNS_UART_RXBS_FRAMING 0x00000002 /* Framing error status */
79#define CDNS_UART_RXBS_BRK 0x00000004 /* Overrun error status */
80
81/*
82 * Mode Register:
83 * The mode register (MR) defines the mode of transfer as well as the data
84 * format. If this register is modified during transmission or reception,
85 * data validity cannot be guaranteed.
86 */
87#define CDNS_UART_MR_CLKSEL 0x00000001 /* Pre-scalar selection */
88#define CDNS_UART_MR_CHMODE_L_LOOP 0x00000200 /* Local loop back mode */
89#define CDNS_UART_MR_CHMODE_NORM 0x00000000 /* Normal mode */
90#define CDNS_UART_MR_CHMODE_MASK 0x00000300 /* Mask for mode bits */
91
92#define CDNS_UART_MR_STOPMODE_2_BIT 0x00000080 /* 2 stop bits */
93#define CDNS_UART_MR_STOPMODE_1_BIT 0x00000000 /* 1 stop bit */
94
95#define CDNS_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
96#define CDNS_UART_MR_PARITY_MARK 0x00000018 /* Mark parity mode */
97#define CDNS_UART_MR_PARITY_SPACE 0x00000010 /* Space parity mode */
98#define CDNS_UART_MR_PARITY_ODD 0x00000008 /* Odd parity mode */
99#define CDNS_UART_MR_PARITY_EVEN 0x00000000 /* Even parity mode */
100
101#define CDNS_UART_MR_CHARLEN_6_BIT 0x00000006 /* 6 bits data */
102#define CDNS_UART_MR_CHARLEN_7_BIT 0x00000004 /* 7 bits data */
103#define CDNS_UART_MR_CHARLEN_8_BIT 0x00000000 /* 8 bits data */
104
105/*
106 * Interrupt Registers:
107 * Interrupt control logic uses the interrupt enable register (IER) and the
108 * interrupt disable register (IDR) to set the value of the bits in the
109 * interrupt mask register (IMR). The IMR determines whether to pass an
110 * interrupt to the interrupt status register (ISR).
111 * Writing a 1 to IER Enables an interrupt, writing a 1 to IDR disables an
112 * interrupt. IMR and ISR are read only, and IER and IDR are write only.
113 * Reading either IER or IDR returns 0x00.
114 * All four registers have the same bit definitions.
115 */
116#define CDNS_UART_IXR_TOUT 0x00000100 /* RX Timeout error interrupt */
117#define CDNS_UART_IXR_PARITY 0x00000080 /* Parity error interrupt */
118#define CDNS_UART_IXR_FRAMING 0x00000040 /* Framing error interrupt */
119#define CDNS_UART_IXR_OVERRUN 0x00000020 /* Overrun error interrupt */
120#define CDNS_UART_IXR_TXFULL 0x00000010 /* TX FIFO Full interrupt */
121#define CDNS_UART_IXR_TXEMPTY 0x00000008 /* TX FIFO empty interrupt */
122#define CDNS_UART_ISR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt */
123#define CDNS_UART_IXR_RXTRIG 0x00000001 /* RX FIFO trigger interrupt */
124#define CDNS_UART_IXR_RXFULL 0x00000004 /* RX FIFO full interrupt. */
125#define CDNS_UART_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */
126#define CDNS_UART_IXR_RXMASK 0x000021e7 /* Valid RX bit mask */
127
128 /*
129 * Do not enable parity error interrupt for the following
130 * reason: When parity error interrupt is enabled, each Rx
131 * parity error always results in 2 events. The first one
132 * being parity error interrupt and the second one with a
133 * proper Rx interrupt with the incoming data. Disabling
134 * parity error interrupt ensures better handling of parity
135 * error events. With this change, for a parity error case, we
136 * get a Rx interrupt with parity error set in ISR register
137 * and we still handle parity errors in the desired way.
138 */
139
140#define CDNS_UART_RX_IRQS (CDNS_UART_IXR_FRAMING | \
141 CDNS_UART_IXR_OVERRUN | \
142 CDNS_UART_IXR_RXTRIG | \
143 CDNS_UART_IXR_TOUT)
144
145/* Goes in read_status_mask for break detection as the HW doesn't do it*/
146#define CDNS_UART_IXR_BRK 0x00002000
147
148#define CDNS_UART_RXBS_SUPPORT BIT(1)
149/*
150 * Modem Control register:
151 * The read/write Modem Control register controls the interface with the modem
152 * or data set, or a peripheral device emulating a modem.
153 */
154#define CDNS_UART_MODEMCR_FCM 0x00000020 /* Automatic flow control mode */
155#define CDNS_UART_MODEMCR_RTS 0x00000002 /* Request to send output control */
156#define CDNS_UART_MODEMCR_DTR 0x00000001 /* Data Terminal Ready */
157
158/*
159 * Modem Status register:
160 * The read/write Modem Status register reports the interface with the modem
161 * or data set, or a peripheral device emulating a modem.
162 */
163#define CDNS_UART_MODEMSR_DCD BIT(7) /* Data Carrier Detect */
164#define CDNS_UART_MODEMSR_RI BIT(6) /* Ting Indicator */
165#define CDNS_UART_MODEMSR_DSR BIT(5) /* Data Set Ready */
166#define CDNS_UART_MODEMSR_CTS BIT(4) /* Clear To Send */
167
168/*
169 * Channel Status Register:
170 * The channel status register (CSR) is provided to enable the control logic
171 * to monitor the status of bits in the channel interrupt status register,
172 * even if these are masked out by the interrupt mask register.
173 */
174#define CDNS_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */
175#define CDNS_UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
176#define CDNS_UART_SR_TXFULL 0x00000010 /* TX FIFO full */
177#define CDNS_UART_SR_RXTRIG 0x00000001 /* Rx Trigger */
178#define CDNS_UART_SR_TACTIVE 0x00000800 /* TX state machine active */
179
180/* baud dividers min/max values */
181#define CDNS_UART_BDIV_MIN 4
182#define CDNS_UART_BDIV_MAX 255
183#define CDNS_UART_CD_MAX 65535
184#define UART_AUTOSUSPEND_TIMEOUT 3000
185
186/**
187 * struct cdns_uart - device data
188 * @port: Pointer to the UART port
189 * @uartclk: Reference clock
190 * @pclk: APB clock
191 * @cdns_uart_driver: Pointer to UART driver
192 * @baud: Current baud rate
193 * @clk_rate_change_nb: Notifier block for clock changes
194 * @quirks: Flags for RXBS support.
195 */
196struct cdns_uart {
197 struct uart_port *port;
198 struct clk *uartclk;
199 struct clk *pclk;
200 struct uart_driver *cdns_uart_driver;
201 unsigned int baud;
202 struct notifier_block clk_rate_change_nb;
203 u32 quirks;
204 bool cts_override;
205};
206struct cdns_platform_data {
207 u32 quirks;
208};
209#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \
210 clk_rate_change_nb)
211
212/**
213 * cdns_uart_handle_rx - Handle the received bytes along with Rx errors.
214 * @dev_id: Id of the UART port
215 * @isrstatus: The interrupt status register value as read
216 * Return: None
217 */
218static void cdns_uart_handle_rx(void *dev_id, unsigned int isrstatus)
219{
220 struct uart_port *port = (struct uart_port *)dev_id;
221 struct cdns_uart *cdns_uart = port->private_data;
222 unsigned int data;
223 unsigned int rxbs_status = 0;
224 unsigned int status_mask;
225 unsigned int framerrprocessed = 0;
226 char status = TTY_NORMAL;
227 bool is_rxbs_support;
228
229 is_rxbs_support = cdns_uart->quirks & CDNS_UART_RXBS_SUPPORT;
230
231 while ((readl(port->membase + CDNS_UART_SR) &
232 CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
233 if (is_rxbs_support)
234 rxbs_status = readl(port->membase + CDNS_UART_RXBS);
235 data = readl(port->membase + CDNS_UART_FIFO);
236 port->icount.rx++;
237 /*
238 * There is no hardware break detection in Zynq, so we interpret
239 * framing error with all-zeros data as a break sequence.
240 * Most of the time, there's another non-zero byte at the
241 * end of the sequence.
242 */
243 if (!is_rxbs_support && (isrstatus & CDNS_UART_IXR_FRAMING)) {
244 if (!data) {
245 port->read_status_mask |= CDNS_UART_IXR_BRK;
246 framerrprocessed = 1;
247 continue;
248 }
249 }
250 if (is_rxbs_support && (rxbs_status & CDNS_UART_RXBS_BRK)) {
251 port->icount.brk++;
252 status = TTY_BREAK;
253 if (uart_handle_break(port))
254 continue;
255 }
256
257 isrstatus &= port->read_status_mask;
258 isrstatus &= ~port->ignore_status_mask;
259 status_mask = port->read_status_mask;
260 status_mask &= ~port->ignore_status_mask;
261
262 if (data &&
263 (port->read_status_mask & CDNS_UART_IXR_BRK)) {
264 port->read_status_mask &= ~CDNS_UART_IXR_BRK;
265 port->icount.brk++;
266 if (uart_handle_break(port))
267 continue;
268 }
269
270 if (uart_handle_sysrq_char(port, data))
271 continue;
272
273 if (is_rxbs_support) {
274 if ((rxbs_status & CDNS_UART_RXBS_PARITY)
275 && (status_mask & CDNS_UART_IXR_PARITY)) {
276 port->icount.parity++;
277 status = TTY_PARITY;
278 }
279 if ((rxbs_status & CDNS_UART_RXBS_FRAMING)
280 && (status_mask & CDNS_UART_IXR_PARITY)) {
281 port->icount.frame++;
282 status = TTY_FRAME;
283 }
284 } else {
285 if (isrstatus & CDNS_UART_IXR_PARITY) {
286 port->icount.parity++;
287 status = TTY_PARITY;
288 }
289 if ((isrstatus & CDNS_UART_IXR_FRAMING) &&
290 !framerrprocessed) {
291 port->icount.frame++;
292 status = TTY_FRAME;
293 }
294 }
295 if (isrstatus & CDNS_UART_IXR_OVERRUN) {
296 port->icount.overrun++;
297 tty_insert_flip_char(&port->state->port, 0,
298 TTY_OVERRUN);
299 }
300 tty_insert_flip_char(&port->state->port, data, status);
301 isrstatus = 0;
302 }
303 spin_unlock(&port->lock);
304 tty_flip_buffer_push(&port->state->port);
305 spin_lock(&port->lock);
306}
307
308/**
309 * cdns_uart_handle_tx - Handle the bytes to be Txed.
310 * @dev_id: Id of the UART port
311 * Return: None
312 */
313static void cdns_uart_handle_tx(void *dev_id)
314{
315 struct uart_port *port = (struct uart_port *)dev_id;
316 unsigned int numbytes;
317
318 if (uart_circ_empty(&port->state->xmit)) {
319 writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IDR);
320 } else {
321 numbytes = port->fifosize;
322 while (numbytes && !uart_circ_empty(&port->state->xmit) &&
323 !(readl(port->membase + CDNS_UART_SR) &
324 CDNS_UART_SR_TXFULL)) {
325 /*
326 * Get the data from the UART circular buffer
327 * and write it to the cdns_uart's TX_FIFO
328 * register.
329 */
330 writel(
331 port->state->xmit.buf[port->state->xmit.tail],
332 port->membase + CDNS_UART_FIFO);
333
334 port->icount.tx++;
335
336 /*
337 * Adjust the tail of the UART buffer and wrap
338 * the buffer if it reaches limit.
339 */
340 port->state->xmit.tail =
341 (port->state->xmit.tail + 1) &
342 (UART_XMIT_SIZE - 1);
343
344 numbytes--;
345 }
346
347 if (uart_circ_chars_pending(
348 &port->state->xmit) < WAKEUP_CHARS)
349 uart_write_wakeup(port);
350 }
351}
352
353/**
354 * cdns_uart_isr - Interrupt handler
355 * @irq: Irq number
356 * @dev_id: Id of the port
357 *
358 * Return: IRQHANDLED
359 */
360static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
361{
362 struct uart_port *port = (struct uart_port *)dev_id;
363 unsigned int isrstatus;
364
365 spin_lock(&port->lock);
366
367 /* Read the interrupt status register to determine which
368 * interrupt(s) is/are active and clear them.
369 */
370 isrstatus = readl(port->membase + CDNS_UART_ISR);
371 writel(isrstatus, port->membase + CDNS_UART_ISR);
372
373 if (isrstatus & CDNS_UART_IXR_TXEMPTY) {
374 cdns_uart_handle_tx(dev_id);
375 isrstatus &= ~CDNS_UART_IXR_TXEMPTY;
376 }
377
378 /*
379 * Skip RX processing if RX is disabled as RXEMPTY will never be set
380 * as read bytes will not be removed from the FIFO.
381 */
382 if (isrstatus & CDNS_UART_IXR_RXMASK &&
383 !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS))
384 cdns_uart_handle_rx(dev_id, isrstatus);
385
386 spin_unlock(&port->lock);
387 return IRQ_HANDLED;
388}
389
390/**
391 * cdns_uart_calc_baud_divs - Calculate baud rate divisors
392 * @clk: UART module input clock
393 * @baud: Desired baud rate
394 * @rbdiv: BDIV value (return value)
395 * @rcd: CD value (return value)
396 * @div8: Value for clk_sel bit in mod (return value)
397 * Return: baud rate, requested baud when possible, or actual baud when there
398 * was too much error, zero if no valid divisors are found.
399 *
400 * Formula to obtain baud rate is
401 * baud_tx/rx rate = clk/CD * (BDIV + 1)
402 * input_clk = (Uart User Defined Clock or Apb Clock)
403 * depends on UCLKEN in MR Reg
404 * clk = input_clk or input_clk/8;
405 * depends on CLKS in MR reg
406 * CD and BDIV depends on values in
407 * baud rate generate register
408 * baud rate clock divisor register
409 */
410static unsigned int cdns_uart_calc_baud_divs(unsigned int clk,
411 unsigned int baud, u32 *rbdiv, u32 *rcd, int *div8)
412{
413 u32 cd, bdiv;
414 unsigned int calc_baud;
415 unsigned int bestbaud = 0;
416 unsigned int bauderror;
417 unsigned int besterror = ~0;
418
419 if (baud < clk / ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX)) {
420 *div8 = 1;
421 clk /= 8;
422 } else {
423 *div8 = 0;
424 }
425
426 for (bdiv = CDNS_UART_BDIV_MIN; bdiv <= CDNS_UART_BDIV_MAX; bdiv++) {
427 cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1));
428 if (cd < 1 || cd > CDNS_UART_CD_MAX)
429 continue;
430
431 calc_baud = clk / (cd * (bdiv + 1));
432
433 if (baud > calc_baud)
434 bauderror = baud - calc_baud;
435 else
436 bauderror = calc_baud - baud;
437
438 if (besterror > bauderror) {
439 *rbdiv = bdiv;
440 *rcd = cd;
441 bestbaud = calc_baud;
442 besterror = bauderror;
443 }
444 }
445 /* use the values when percent error is acceptable */
446 if (((besterror * 100) / baud) < 3)
447 bestbaud = baud;
448
449 return bestbaud;
450}
451
452/**
453 * cdns_uart_set_baud_rate - Calculate and set the baud rate
454 * @port: Handle to the uart port structure
455 * @baud: Baud rate to set
456 * Return: baud rate, requested baud when possible, or actual baud when there
457 * was too much error, zero if no valid divisors are found.
458 */
459static unsigned int cdns_uart_set_baud_rate(struct uart_port *port,
460 unsigned int baud)
461{
462 unsigned int calc_baud;
463 u32 cd = 0, bdiv = 0;
464 u32 mreg;
465 int div8;
466 struct cdns_uart *cdns_uart = port->private_data;
467
468 calc_baud = cdns_uart_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
469 &div8);
470
471 /* Write new divisors to hardware */
472 mreg = readl(port->membase + CDNS_UART_MR);
473 if (div8)
474 mreg |= CDNS_UART_MR_CLKSEL;
475 else
476 mreg &= ~CDNS_UART_MR_CLKSEL;
477 writel(mreg, port->membase + CDNS_UART_MR);
478 writel(cd, port->membase + CDNS_UART_BAUDGEN);
479 writel(bdiv, port->membase + CDNS_UART_BAUDDIV);
480 cdns_uart->baud = baud;
481
482 return calc_baud;
483}
484
485#ifdef CONFIG_COMMON_CLK
486/**
487 * cdns_uart_clk_notitifer_cb - Clock notifier callback
488 * @nb: Notifier block
489 * @event: Notify event
490 * @data: Notifier data
491 * Return: NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error.
492 */
493static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
494 unsigned long event, void *data)
495{
496 u32 ctrl_reg;
497 struct uart_port *port;
498 int locked = 0;
499 struct clk_notifier_data *ndata = data;
500 unsigned long flags = 0;
501 struct cdns_uart *cdns_uart = to_cdns_uart(nb);
502
503 port = cdns_uart->port;
504 if (port->suspended)
505 return NOTIFY_OK;
506
507 switch (event) {
508 case PRE_RATE_CHANGE:
509 {
510 u32 bdiv, cd;
511 int div8;
512
513 /*
514 * Find out if current baud-rate can be achieved with new clock
515 * frequency.
516 */
517 if (!cdns_uart_calc_baud_divs(ndata->new_rate, cdns_uart->baud,
518 &bdiv, &cd, &div8)) {
519 dev_warn(port->dev, "clock rate change rejected\n");
520 return NOTIFY_BAD;
521 }
522
523 spin_lock_irqsave(&cdns_uart->port->lock, flags);
524
525 /* Disable the TX and RX to set baud rate */
526 ctrl_reg = readl(port->membase + CDNS_UART_CR);
527 ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
528 writel(ctrl_reg, port->membase + CDNS_UART_CR);
529
530 spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
531
532 return NOTIFY_OK;
533 }
534 case POST_RATE_CHANGE:
535 /*
536 * Set clk dividers to generate correct baud with new clock
537 * frequency.
538 */
539
540 spin_lock_irqsave(&cdns_uart->port->lock, flags);
541
542 locked = 1;
543 port->uartclk = ndata->new_rate;
544
545 cdns_uart->baud = cdns_uart_set_baud_rate(cdns_uart->port,
546 cdns_uart->baud);
547 fallthrough;
548 case ABORT_RATE_CHANGE:
549 if (!locked)
550 spin_lock_irqsave(&cdns_uart->port->lock, flags);
551
552 /* Set TX/RX Reset */
553 ctrl_reg = readl(port->membase + CDNS_UART_CR);
554 ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
555 writel(ctrl_reg, port->membase + CDNS_UART_CR);
556
557 while (readl(port->membase + CDNS_UART_CR) &
558 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
559 cpu_relax();
560
561 /*
562 * Clear the RX disable and TX disable bits and then set the TX
563 * enable bit and RX enable bit to enable the transmitter and
564 * receiver.
565 */
566 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
567 ctrl_reg = readl(port->membase + CDNS_UART_CR);
568 ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
569 ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
570 writel(ctrl_reg, port->membase + CDNS_UART_CR);
571
572 spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
573
574 return NOTIFY_OK;
575 default:
576 return NOTIFY_DONE;
577 }
578}
579#endif
580
581/**
582 * cdns_uart_start_tx - Start transmitting bytes
583 * @port: Handle to the uart port structure
584 */
585static void cdns_uart_start_tx(struct uart_port *port)
586{
587 unsigned int status;
588
589 if (uart_tx_stopped(port))
590 return;
591
592 /*
593 * Set the TX enable bit and clear the TX disable bit to enable the
594 * transmitter.
595 */
596 status = readl(port->membase + CDNS_UART_CR);
597 status &= ~CDNS_UART_CR_TX_DIS;
598 status |= CDNS_UART_CR_TX_EN;
599 writel(status, port->membase + CDNS_UART_CR);
600
601 if (uart_circ_empty(&port->state->xmit))
602 return;
603
604 cdns_uart_handle_tx(port);
605
606 writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR);
607 /* Enable the TX Empty interrupt */
608 writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IER);
609}
610
611/**
612 * cdns_uart_stop_tx - Stop TX
613 * @port: Handle to the uart port structure
614 */
615static void cdns_uart_stop_tx(struct uart_port *port)
616{
617 unsigned int regval;
618
619 regval = readl(port->membase + CDNS_UART_CR);
620 regval |= CDNS_UART_CR_TX_DIS;
621 /* Disable the transmitter */
622 writel(regval, port->membase + CDNS_UART_CR);
623}
624
625/**
626 * cdns_uart_stop_rx - Stop RX
627 * @port: Handle to the uart port structure
628 */
629static void cdns_uart_stop_rx(struct uart_port *port)
630{
631 unsigned int regval;
632
633 /* Disable RX IRQs */
634 writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IDR);
635
636 /* Disable the receiver */
637 regval = readl(port->membase + CDNS_UART_CR);
638 regval |= CDNS_UART_CR_RX_DIS;
639 writel(regval, port->membase + CDNS_UART_CR);
640}
641
642/**
643 * cdns_uart_tx_empty - Check whether TX is empty
644 * @port: Handle to the uart port structure
645 *
646 * Return: TIOCSER_TEMT on success, 0 otherwise
647 */
648static unsigned int cdns_uart_tx_empty(struct uart_port *port)
649{
650 unsigned int status;
651
652 status = readl(port->membase + CDNS_UART_SR) &
653 (CDNS_UART_SR_TXEMPTY | CDNS_UART_SR_TACTIVE);
654 return (status == CDNS_UART_SR_TXEMPTY) ? TIOCSER_TEMT : 0;
655}
656
657/**
658 * cdns_uart_break_ctl - Based on the input ctl we have to start or stop
659 * transmitting char breaks
660 * @port: Handle to the uart port structure
661 * @ctl: Value based on which start or stop decision is taken
662 */
663static void cdns_uart_break_ctl(struct uart_port *port, int ctl)
664{
665 unsigned int status;
666 unsigned long flags;
667
668 spin_lock_irqsave(&port->lock, flags);
669
670 status = readl(port->membase + CDNS_UART_CR);
671
672 if (ctl == -1)
673 writel(CDNS_UART_CR_STARTBRK | status,
674 port->membase + CDNS_UART_CR);
675 else {
676 if ((status & CDNS_UART_CR_STOPBRK) == 0)
677 writel(CDNS_UART_CR_STOPBRK | status,
678 port->membase + CDNS_UART_CR);
679 }
680 spin_unlock_irqrestore(&port->lock, flags);
681}
682
683/**
684 * cdns_uart_set_termios - termios operations, handling data length, parity,
685 * stop bits, flow control, baud rate
686 * @port: Handle to the uart port structure
687 * @termios: Handle to the input termios structure
688 * @old: Values of the previously saved termios structure
689 */
690static void cdns_uart_set_termios(struct uart_port *port,
691 struct ktermios *termios, struct ktermios *old)
692{
693 u32 cval = 0;
694 unsigned int baud, minbaud, maxbaud;
695 unsigned long flags;
696 unsigned int ctrl_reg, mode_reg;
697
698 spin_lock_irqsave(&port->lock, flags);
699
700 /* Disable the TX and RX to set baud rate */
701 ctrl_reg = readl(port->membase + CDNS_UART_CR);
702 ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
703 writel(ctrl_reg, port->membase + CDNS_UART_CR);
704
705 /*
706 * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
707 * min and max baud should be calculated here based on port->uartclk.
708 * this way we get a valid baud and can safely call set_baud()
709 */
710 minbaud = port->uartclk /
711 ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX * 8);
712 maxbaud = port->uartclk / (CDNS_UART_BDIV_MIN + 1);
713 baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud);
714 baud = cdns_uart_set_baud_rate(port, baud);
715 if (tty_termios_baud_rate(termios))
716 tty_termios_encode_baud_rate(termios, baud, baud);
717
718 /* Update the per-port timeout. */
719 uart_update_timeout(port, termios->c_cflag, baud);
720
721 /* Set TX/RX Reset */
722 ctrl_reg = readl(port->membase + CDNS_UART_CR);
723 ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
724 writel(ctrl_reg, port->membase + CDNS_UART_CR);
725
726 while (readl(port->membase + CDNS_UART_CR) &
727 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
728 cpu_relax();
729
730 /*
731 * Clear the RX disable and TX disable bits and then set the TX enable
732 * bit and RX enable bit to enable the transmitter and receiver.
733 */
734 ctrl_reg = readl(port->membase + CDNS_UART_CR);
735 ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
736 ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
737 writel(ctrl_reg, port->membase + CDNS_UART_CR);
738
739 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
740
741 port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG |
742 CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT;
743 port->ignore_status_mask = 0;
744
745 if (termios->c_iflag & INPCK)
746 port->read_status_mask |= CDNS_UART_IXR_PARITY |
747 CDNS_UART_IXR_FRAMING;
748
749 if (termios->c_iflag & IGNPAR)
750 port->ignore_status_mask |= CDNS_UART_IXR_PARITY |
751 CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
752
753 /* ignore all characters if CREAD is not set */
754 if ((termios->c_cflag & CREAD) == 0)
755 port->ignore_status_mask |= CDNS_UART_IXR_RXTRIG |
756 CDNS_UART_IXR_TOUT | CDNS_UART_IXR_PARITY |
757 CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
758
759 mode_reg = readl(port->membase + CDNS_UART_MR);
760
761 /* Handling Data Size */
762 switch (termios->c_cflag & CSIZE) {
763 case CS6:
764 cval |= CDNS_UART_MR_CHARLEN_6_BIT;
765 break;
766 case CS7:
767 cval |= CDNS_UART_MR_CHARLEN_7_BIT;
768 break;
769 default:
770 case CS8:
771 cval |= CDNS_UART_MR_CHARLEN_8_BIT;
772 termios->c_cflag &= ~CSIZE;
773 termios->c_cflag |= CS8;
774 break;
775 }
776
777 /* Handling Parity and Stop Bits length */
778 if (termios->c_cflag & CSTOPB)
779 cval |= CDNS_UART_MR_STOPMODE_2_BIT; /* 2 STOP bits */
780 else
781 cval |= CDNS_UART_MR_STOPMODE_1_BIT; /* 1 STOP bit */
782
783 if (termios->c_cflag & PARENB) {
784 /* Mark or Space parity */
785 if (termios->c_cflag & CMSPAR) {
786 if (termios->c_cflag & PARODD)
787 cval |= CDNS_UART_MR_PARITY_MARK;
788 else
789 cval |= CDNS_UART_MR_PARITY_SPACE;
790 } else {
791 if (termios->c_cflag & PARODD)
792 cval |= CDNS_UART_MR_PARITY_ODD;
793 else
794 cval |= CDNS_UART_MR_PARITY_EVEN;
795 }
796 } else {
797 cval |= CDNS_UART_MR_PARITY_NONE;
798 }
799 cval |= mode_reg & 1;
800 writel(cval, port->membase + CDNS_UART_MR);
801
802 cval = readl(port->membase + CDNS_UART_MODEMCR);
803 if (termios->c_cflag & CRTSCTS)
804 cval |= CDNS_UART_MODEMCR_FCM;
805 else
806 cval &= ~CDNS_UART_MODEMCR_FCM;
807 writel(cval, port->membase + CDNS_UART_MODEMCR);
808
809 spin_unlock_irqrestore(&port->lock, flags);
810}
811
812/**
813 * cdns_uart_startup - Called when an application opens a cdns_uart port
814 * @port: Handle to the uart port structure
815 *
816 * Return: 0 on success, negative errno otherwise
817 */
818static int cdns_uart_startup(struct uart_port *port)
819{
820 struct cdns_uart *cdns_uart = port->private_data;
821 bool is_brk_support;
822 int ret;
823 unsigned long flags;
824 unsigned int status = 0;
825
826 is_brk_support = cdns_uart->quirks & CDNS_UART_RXBS_SUPPORT;
827
828 spin_lock_irqsave(&port->lock, flags);
829
830 /* Disable the TX and RX */
831 writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
832 port->membase + CDNS_UART_CR);
833
834 /* Set the Control Register with TX/RX Enable, TX/RX Reset,
835 * no break chars.
836 */
837 writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
838 port->membase + CDNS_UART_CR);
839
840 while (readl(port->membase + CDNS_UART_CR) &
841 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
842 cpu_relax();
843
844 /*
845 * Clear the RX disable bit and then set the RX enable bit to enable
846 * the receiver.
847 */
848 status = readl(port->membase + CDNS_UART_CR);
849 status &= ~CDNS_UART_CR_RX_DIS;
850 status |= CDNS_UART_CR_RX_EN;
851 writel(status, port->membase + CDNS_UART_CR);
852
853 /* Set the Mode Register with normal mode,8 data bits,1 stop bit,
854 * no parity.
855 */
856 writel(CDNS_UART_MR_CHMODE_NORM | CDNS_UART_MR_STOPMODE_1_BIT
857 | CDNS_UART_MR_PARITY_NONE | CDNS_UART_MR_CHARLEN_8_BIT,
858 port->membase + CDNS_UART_MR);
859
860 /*
861 * Set the RX FIFO Trigger level to use most of the FIFO, but it
862 * can be tuned with a module parameter
863 */
864 writel(rx_trigger_level, port->membase + CDNS_UART_RXWM);
865
866 /*
867 * Receive Timeout register is enabled but it
868 * can be tuned with a module parameter
869 */
870 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
871
872 /* Clear out any pending interrupts before enabling them */
873 writel(readl(port->membase + CDNS_UART_ISR),
874 port->membase + CDNS_UART_ISR);
875
876 spin_unlock_irqrestore(&port->lock, flags);
877
878 ret = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME, port);
879 if (ret) {
880 dev_err(port->dev, "request_irq '%d' failed with %d\n",
881 port->irq, ret);
882 return ret;
883 }
884
885 /* Set the Interrupt Registers with desired interrupts */
886 if (is_brk_support)
887 writel(CDNS_UART_RX_IRQS | CDNS_UART_IXR_BRK,
888 port->membase + CDNS_UART_IER);
889 else
890 writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IER);
891
892 return 0;
893}
894
895/**
896 * cdns_uart_shutdown - Called when an application closes a cdns_uart port
897 * @port: Handle to the uart port structure
898 */
899static void cdns_uart_shutdown(struct uart_port *port)
900{
901 int status;
902 unsigned long flags;
903
904 spin_lock_irqsave(&port->lock, flags);
905
906 /* Disable interrupts */
907 status = readl(port->membase + CDNS_UART_IMR);
908 writel(status, port->membase + CDNS_UART_IDR);
909 writel(0xffffffff, port->membase + CDNS_UART_ISR);
910
911 /* Disable the TX and RX */
912 writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
913 port->membase + CDNS_UART_CR);
914
915 spin_unlock_irqrestore(&port->lock, flags);
916
917 free_irq(port->irq, port);
918}
919
920/**
921 * cdns_uart_type - Set UART type to cdns_uart port
922 * @port: Handle to the uart port structure
923 *
924 * Return: string on success, NULL otherwise
925 */
926static const char *cdns_uart_type(struct uart_port *port)
927{
928 return port->type == PORT_XUARTPS ? CDNS_UART_NAME : NULL;
929}
930
931/**
932 * cdns_uart_verify_port - Verify the port params
933 * @port: Handle to the uart port structure
934 * @ser: Handle to the structure whose members are compared
935 *
936 * Return: 0 on success, negative errno otherwise.
937 */
938static int cdns_uart_verify_port(struct uart_port *port,
939 struct serial_struct *ser)
940{
941 if (ser->type != PORT_UNKNOWN && ser->type != PORT_XUARTPS)
942 return -EINVAL;
943 if (port->irq != ser->irq)
944 return -EINVAL;
945 if (ser->io_type != UPIO_MEM)
946 return -EINVAL;
947 if (port->iobase != ser->port)
948 return -EINVAL;
949 if (ser->hub6 != 0)
950 return -EINVAL;
951 return 0;
952}
953
954/**
955 * cdns_uart_request_port - Claim the memory region attached to cdns_uart port,
956 * called when the driver adds a cdns_uart port via
957 * uart_add_one_port()
958 * @port: Handle to the uart port structure
959 *
960 * Return: 0 on success, negative errno otherwise.
961 */
962static int cdns_uart_request_port(struct uart_port *port)
963{
964 if (!request_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE,
965 CDNS_UART_NAME)) {
966 return -ENOMEM;
967 }
968
969 port->membase = ioremap(port->mapbase, CDNS_UART_REGISTER_SPACE);
970 if (!port->membase) {
971 dev_err(port->dev, "Unable to map registers\n");
972 release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
973 return -ENOMEM;
974 }
975 return 0;
976}
977
978/**
979 * cdns_uart_release_port - Release UART port
980 * @port: Handle to the uart port structure
981 *
982 * Release the memory region attached to a cdns_uart port. Called when the
983 * driver removes a cdns_uart port via uart_remove_one_port().
984 */
985static void cdns_uart_release_port(struct uart_port *port)
986{
987 release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
988 iounmap(port->membase);
989 port->membase = NULL;
990}
991
992/**
993 * cdns_uart_config_port - Configure UART port
994 * @port: Handle to the uart port structure
995 * @flags: If any
996 */
997static void cdns_uart_config_port(struct uart_port *port, int flags)
998{
999 if (flags & UART_CONFIG_TYPE && cdns_uart_request_port(port) == 0)
1000 port->type = PORT_XUARTPS;
1001}
1002
1003/**
1004 * cdns_uart_get_mctrl - Get the modem control state
1005 * @port: Handle to the uart port structure
1006 *
1007 * Return: the modem control state
1008 */
1009static unsigned int cdns_uart_get_mctrl(struct uart_port *port)
1010{
1011 u32 val;
1012 unsigned int mctrl = 0;
1013 struct cdns_uart *cdns_uart_data = port->private_data;
1014
1015 if (cdns_uart_data->cts_override)
1016 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
1017
1018 val = readl(port->membase + CDNS_UART_MODEMSR);
1019 if (val & CDNS_UART_MODEMSR_CTS)
1020 mctrl |= TIOCM_CTS;
1021 if (val & CDNS_UART_MODEMSR_DSR)
1022 mctrl |= TIOCM_DSR;
1023 if (val & CDNS_UART_MODEMSR_RI)
1024 mctrl |= TIOCM_RNG;
1025 if (val & CDNS_UART_MODEMSR_DCD)
1026 mctrl |= TIOCM_CAR;
1027
1028 return mctrl;
1029}
1030
1031static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
1032{
1033 u32 val;
1034 u32 mode_reg;
1035 struct cdns_uart *cdns_uart_data = port->private_data;
1036
1037 if (cdns_uart_data->cts_override)
1038 return;
1039
1040 val = readl(port->membase + CDNS_UART_MODEMCR);
1041 mode_reg = readl(port->membase + CDNS_UART_MR);
1042
1043 val &= ~(CDNS_UART_MODEMCR_RTS | CDNS_UART_MODEMCR_DTR);
1044 mode_reg &= ~CDNS_UART_MR_CHMODE_MASK;
1045
1046 if (mctrl & TIOCM_RTS)
1047 val |= CDNS_UART_MODEMCR_RTS;
1048 if (mctrl & TIOCM_DTR)
1049 val |= CDNS_UART_MODEMCR_DTR;
1050 if (mctrl & TIOCM_LOOP)
1051 mode_reg |= CDNS_UART_MR_CHMODE_L_LOOP;
1052 else
1053 mode_reg |= CDNS_UART_MR_CHMODE_NORM;
1054
1055 writel(val, port->membase + CDNS_UART_MODEMCR);
1056 writel(mode_reg, port->membase + CDNS_UART_MR);
1057}
1058
1059#ifdef CONFIG_CONSOLE_POLL
1060static int cdns_uart_poll_get_char(struct uart_port *port)
1061{
1062 int c;
1063 unsigned long flags;
1064
1065 spin_lock_irqsave(&port->lock, flags);
1066
1067 /* Check if FIFO is empty */
1068 if (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_RXEMPTY)
1069 c = NO_POLL_CHAR;
1070 else /* Read a character */
1071 c = (unsigned char) readl(port->membase + CDNS_UART_FIFO);
1072
1073 spin_unlock_irqrestore(&port->lock, flags);
1074
1075 return c;
1076}
1077
1078static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c)
1079{
1080 unsigned long flags;
1081
1082 spin_lock_irqsave(&port->lock, flags);
1083
1084 /* Wait until FIFO is empty */
1085 while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
1086 cpu_relax();
1087
1088 /* Write a character */
1089 writel(c, port->membase + CDNS_UART_FIFO);
1090
1091 /* Wait until FIFO is empty */
1092 while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
1093 cpu_relax();
1094
1095 spin_unlock_irqrestore(&port->lock, flags);
1096}
1097#endif
1098
1099static void cdns_uart_pm(struct uart_port *port, unsigned int state,
1100 unsigned int oldstate)
1101{
1102 switch (state) {
1103 case UART_PM_STATE_OFF:
1104 pm_runtime_mark_last_busy(port->dev);
1105 pm_runtime_put_autosuspend(port->dev);
1106 break;
1107 default:
1108 pm_runtime_get_sync(port->dev);
1109 break;
1110 }
1111}
1112
1113static const struct uart_ops cdns_uart_ops = {
1114 .set_mctrl = cdns_uart_set_mctrl,
1115 .get_mctrl = cdns_uart_get_mctrl,
1116 .start_tx = cdns_uart_start_tx,
1117 .stop_tx = cdns_uart_stop_tx,
1118 .stop_rx = cdns_uart_stop_rx,
1119 .tx_empty = cdns_uart_tx_empty,
1120 .break_ctl = cdns_uart_break_ctl,
1121 .set_termios = cdns_uart_set_termios,
1122 .startup = cdns_uart_startup,
1123 .shutdown = cdns_uart_shutdown,
1124 .pm = cdns_uart_pm,
1125 .type = cdns_uart_type,
1126 .verify_port = cdns_uart_verify_port,
1127 .request_port = cdns_uart_request_port,
1128 .release_port = cdns_uart_release_port,
1129 .config_port = cdns_uart_config_port,
1130#ifdef CONFIG_CONSOLE_POLL
1131 .poll_get_char = cdns_uart_poll_get_char,
1132 .poll_put_char = cdns_uart_poll_put_char,
1133#endif
1134};
1135
1136static struct uart_driver cdns_uart_uart_driver;
1137
1138#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1139/**
1140 * cdns_uart_console_putchar - write the character to the FIFO buffer
1141 * @port: Handle to the uart port structure
1142 * @ch: Character to be written
1143 */
1144static void cdns_uart_console_putchar(struct uart_port *port, int ch)
1145{
1146 while (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)
1147 cpu_relax();
1148 writel(ch, port->membase + CDNS_UART_FIFO);
1149}
1150
1151static void cdns_early_write(struct console *con, const char *s,
1152 unsigned n)
1153{
1154 struct earlycon_device *dev = con->data;
1155
1156 uart_console_write(&dev->port, s, n, cdns_uart_console_putchar);
1157}
1158
1159static int __init cdns_early_console_setup(struct earlycon_device *device,
1160 const char *opt)
1161{
1162 struct uart_port *port = &device->port;
1163
1164 if (!port->membase)
1165 return -ENODEV;
1166
1167 /* initialise control register */
1168 writel(CDNS_UART_CR_TX_EN|CDNS_UART_CR_TXRST|CDNS_UART_CR_RXRST,
1169 port->membase + CDNS_UART_CR);
1170
1171 /* only set baud if specified on command line - otherwise
1172 * assume it has been initialized by a boot loader.
1173 */
1174 if (port->uartclk && device->baud) {
1175 u32 cd = 0, bdiv = 0;
1176 u32 mr;
1177 int div8;
1178
1179 cdns_uart_calc_baud_divs(port->uartclk, device->baud,
1180 &bdiv, &cd, &div8);
1181 mr = CDNS_UART_MR_PARITY_NONE;
1182 if (div8)
1183 mr |= CDNS_UART_MR_CLKSEL;
1184
1185 writel(mr, port->membase + CDNS_UART_MR);
1186 writel(cd, port->membase + CDNS_UART_BAUDGEN);
1187 writel(bdiv, port->membase + CDNS_UART_BAUDDIV);
1188 }
1189
1190 device->con->write = cdns_early_write;
1191
1192 return 0;
1193}
1194OF_EARLYCON_DECLARE(cdns, "xlnx,xuartps", cdns_early_console_setup);
1195OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p8", cdns_early_console_setup);
1196OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p12", cdns_early_console_setup);
1197OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
1198
1199
1200/* Static pointer to console port */
1201static struct uart_port *console_port;
1202
1203/**
1204 * cdns_uart_console_write - perform write operation
1205 * @co: Console handle
1206 * @s: Pointer to character array
1207 * @count: No of characters
1208 */
1209static void cdns_uart_console_write(struct console *co, const char *s,
1210 unsigned int count)
1211{
1212 struct uart_port *port = console_port;
1213 unsigned long flags = 0;
1214 unsigned int imr, ctrl;
1215 int locked = 1;
1216
1217 if (port->sysrq)
1218 locked = 0;
1219 else if (oops_in_progress)
1220 locked = spin_trylock_irqsave(&port->lock, flags);
1221 else
1222 spin_lock_irqsave(&port->lock, flags);
1223
1224 /* save and disable interrupt */
1225 imr = readl(port->membase + CDNS_UART_IMR);
1226 writel(imr, port->membase + CDNS_UART_IDR);
1227
1228 /*
1229 * Make sure that the tx part is enabled. Set the TX enable bit and
1230 * clear the TX disable bit to enable the transmitter.
1231 */
1232 ctrl = readl(port->membase + CDNS_UART_CR);
1233 ctrl &= ~CDNS_UART_CR_TX_DIS;
1234 ctrl |= CDNS_UART_CR_TX_EN;
1235 writel(ctrl, port->membase + CDNS_UART_CR);
1236
1237 uart_console_write(port, s, count, cdns_uart_console_putchar);
1238 while (cdns_uart_tx_empty(port) != TIOCSER_TEMT)
1239 cpu_relax();
1240
1241 /* restore interrupt state */
1242 writel(imr, port->membase + CDNS_UART_IER);
1243
1244 if (locked)
1245 spin_unlock_irqrestore(&port->lock, flags);
1246}
1247
1248/**
1249 * cdns_uart_console_setup - Initialize the uart to default config
1250 * @co: Console handle
1251 * @options: Initial settings of uart
1252 *
1253 * Return: 0 on success, negative errno otherwise.
1254 */
1255static int cdns_uart_console_setup(struct console *co, char *options)
1256{
1257 struct uart_port *port = console_port;
1258
1259 int baud = 9600;
1260 int bits = 8;
1261 int parity = 'n';
1262 int flow = 'n';
1263 unsigned long time_out;
1264
1265 if (!port->membase) {
1266 pr_debug("console on " CDNS_UART_TTY_NAME "%i not present\n",
1267 co->index);
1268 return -ENODEV;
1269 }
1270
1271 if (options)
1272 uart_parse_options(options, &baud, &parity, &bits, &flow);
1273
1274 /* Wait for tx_empty before setting up the console */
1275 time_out = jiffies + usecs_to_jiffies(TX_TIMEOUT);
1276
1277 while (time_before(jiffies, time_out) &&
1278 cdns_uart_tx_empty(port) != TIOCSER_TEMT)
1279 cpu_relax();
1280
1281 return uart_set_options(port, co, baud, parity, bits, flow);
1282}
1283
1284static struct console cdns_uart_console = {
1285 .name = CDNS_UART_TTY_NAME,
1286 .write = cdns_uart_console_write,
1287 .device = uart_console_device,
1288 .setup = cdns_uart_console_setup,
1289 .flags = CON_PRINTBUFFER,
1290 .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
1291 .data = &cdns_uart_uart_driver,
1292};
1293#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
1294
1295#ifdef CONFIG_PM_SLEEP
1296/**
1297 * cdns_uart_suspend - suspend event
1298 * @device: Pointer to the device structure
1299 *
1300 * Return: 0
1301 */
1302static int cdns_uart_suspend(struct device *device)
1303{
1304 struct uart_port *port = dev_get_drvdata(device);
1305 struct cdns_uart *cdns_uart = port->private_data;
1306 int may_wake;
1307
1308 may_wake = device_may_wakeup(device);
1309
1310 if (console_suspend_enabled && uart_console(port) && may_wake) {
1311 unsigned long flags = 0;
1312
1313 spin_lock_irqsave(&port->lock, flags);
1314 /* Empty the receive FIFO 1st before making changes */
1315 while (!(readl(port->membase + CDNS_UART_SR) &
1316 CDNS_UART_SR_RXEMPTY))
1317 readl(port->membase + CDNS_UART_FIFO);
1318 /* set RX trigger level to 1 */
1319 writel(1, port->membase + CDNS_UART_RXWM);
1320 /* disable RX timeout interrups */
1321 writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IDR);
1322 spin_unlock_irqrestore(&port->lock, flags);
1323 }
1324
1325 /*
1326 * Call the API provided in serial_core.c file which handles
1327 * the suspend.
1328 */
1329 return uart_suspend_port(cdns_uart->cdns_uart_driver, port);
1330}
1331
1332/**
1333 * cdns_uart_resume - Resume after a previous suspend
1334 * @device: Pointer to the device structure
1335 *
1336 * Return: 0
1337 */
1338static int cdns_uart_resume(struct device *device)
1339{
1340 struct uart_port *port = dev_get_drvdata(device);
1341 struct cdns_uart *cdns_uart = port->private_data;
1342 unsigned long flags = 0;
1343 u32 ctrl_reg;
1344 int may_wake;
1345
1346 may_wake = device_may_wakeup(device);
1347
1348 if (console_suspend_enabled && uart_console(port) && !may_wake) {
1349 clk_enable(cdns_uart->pclk);
1350 clk_enable(cdns_uart->uartclk);
1351
1352 spin_lock_irqsave(&port->lock, flags);
1353
1354 /* Set TX/RX Reset */
1355 ctrl_reg = readl(port->membase + CDNS_UART_CR);
1356 ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
1357 writel(ctrl_reg, port->membase + CDNS_UART_CR);
1358 while (readl(port->membase + CDNS_UART_CR) &
1359 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
1360 cpu_relax();
1361
1362 /* restore rx timeout value */
1363 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
1364 /* Enable Tx/Rx */
1365 ctrl_reg = readl(port->membase + CDNS_UART_CR);
1366 ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
1367 ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
1368 writel(ctrl_reg, port->membase + CDNS_UART_CR);
1369
1370 clk_disable(cdns_uart->uartclk);
1371 clk_disable(cdns_uart->pclk);
1372 spin_unlock_irqrestore(&port->lock, flags);
1373 } else {
1374 spin_lock_irqsave(&port->lock, flags);
1375 /* restore original rx trigger level */
1376 writel(rx_trigger_level, port->membase + CDNS_UART_RXWM);
1377 /* enable RX timeout interrupt */
1378 writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IER);
1379 spin_unlock_irqrestore(&port->lock, flags);
1380 }
1381
1382 return uart_resume_port(cdns_uart->cdns_uart_driver, port);
1383}
1384#endif /* ! CONFIG_PM_SLEEP */
1385static int __maybe_unused cdns_runtime_suspend(struct device *dev)
1386{
1387 struct uart_port *port = dev_get_drvdata(dev);
1388 struct cdns_uart *cdns_uart = port->private_data;
1389
1390 clk_disable(cdns_uart->uartclk);
1391 clk_disable(cdns_uart->pclk);
1392 return 0;
1393};
1394
1395static int __maybe_unused cdns_runtime_resume(struct device *dev)
1396{
1397 struct uart_port *port = dev_get_drvdata(dev);
1398 struct cdns_uart *cdns_uart = port->private_data;
1399
1400 clk_enable(cdns_uart->pclk);
1401 clk_enable(cdns_uart->uartclk);
1402 return 0;
1403};
1404
1405static const struct dev_pm_ops cdns_uart_dev_pm_ops = {
1406 SET_SYSTEM_SLEEP_PM_OPS(cdns_uart_suspend, cdns_uart_resume)
1407 SET_RUNTIME_PM_OPS(cdns_runtime_suspend,
1408 cdns_runtime_resume, NULL)
1409};
1410
1411static const struct cdns_platform_data zynqmp_uart_def = {
1412 .quirks = CDNS_UART_RXBS_SUPPORT, };
1413
1414/* Match table for of_platform binding */
1415static const struct of_device_id cdns_uart_of_match[] = {
1416 { .compatible = "xlnx,xuartps", },
1417 { .compatible = "cdns,uart-r1p8", },
1418 { .compatible = "cdns,uart-r1p12", .data = &zynqmp_uart_def },
1419 { .compatible = "xlnx,zynqmp-uart", .data = &zynqmp_uart_def },
1420 {}
1421};
1422MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
1423
1424/* Temporary variable for storing number of instances */
1425static int instances;
1426
1427/**
1428 * cdns_uart_probe - Platform driver probe
1429 * @pdev: Pointer to the platform device structure
1430 *
1431 * Return: 0 on success, negative errno otherwise
1432 */
1433static int cdns_uart_probe(struct platform_device *pdev)
1434{
1435 int rc, id, irq;
1436 struct uart_port *port;
1437 struct resource *res;
1438 struct cdns_uart *cdns_uart_data;
1439 const struct of_device_id *match;
1440
1441 cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
1442 GFP_KERNEL);
1443 if (!cdns_uart_data)
1444 return -ENOMEM;
1445 port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
1446 if (!port)
1447 return -ENOMEM;
1448
1449 /* Look for a serialN alias */
1450 id = of_alias_get_id(pdev->dev.of_node, "serial");
1451 if (id < 0)
1452 id = 0;
1453
1454 if (id >= CDNS_UART_NR_PORTS) {
1455 dev_err(&pdev->dev, "Cannot get uart_port structure\n");
1456 return -ENODEV;
1457 }
1458
1459 if (!cdns_uart_uart_driver.state) {
1460 cdns_uart_uart_driver.owner = THIS_MODULE;
1461 cdns_uart_uart_driver.driver_name = CDNS_UART_NAME;
1462 cdns_uart_uart_driver.dev_name = CDNS_UART_TTY_NAME;
1463 cdns_uart_uart_driver.major = CDNS_UART_MAJOR;
1464 cdns_uart_uart_driver.minor = CDNS_UART_MINOR;
1465 cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS;
1466#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1467 cdns_uart_uart_driver.cons = &cdns_uart_console;
1468#endif
1469
1470 rc = uart_register_driver(&cdns_uart_uart_driver);
1471 if (rc < 0) {
1472 dev_err(&pdev->dev, "Failed to register driver\n");
1473 return rc;
1474 }
1475 }
1476
1477 cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver;
1478
1479 match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
1480 if (match && match->data) {
1481 const struct cdns_platform_data *data = match->data;
1482
1483 cdns_uart_data->quirks = data->quirks;
1484 }
1485
1486 cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "pclk");
1487 if (PTR_ERR(cdns_uart_data->pclk) == -EPROBE_DEFER) {
1488 rc = PTR_ERR(cdns_uart_data->pclk);
1489 goto err_out_unregister_driver;
1490 }
1491
1492 if (IS_ERR(cdns_uart_data->pclk)) {
1493 cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "aper_clk");
1494 if (IS_ERR(cdns_uart_data->pclk)) {
1495 rc = PTR_ERR(cdns_uart_data->pclk);
1496 goto err_out_unregister_driver;
1497 }
1498 dev_err(&pdev->dev, "clock name 'aper_clk' is deprecated.\n");
1499 }
1500
1501 cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "uart_clk");
1502 if (PTR_ERR(cdns_uart_data->uartclk) == -EPROBE_DEFER) {
1503 rc = PTR_ERR(cdns_uart_data->uartclk);
1504 goto err_out_unregister_driver;
1505 }
1506
1507 if (IS_ERR(cdns_uart_data->uartclk)) {
1508 cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "ref_clk");
1509 if (IS_ERR(cdns_uart_data->uartclk)) {
1510 rc = PTR_ERR(cdns_uart_data->uartclk);
1511 goto err_out_unregister_driver;
1512 }
1513 dev_err(&pdev->dev, "clock name 'ref_clk' is deprecated.\n");
1514 }
1515
1516 rc = clk_prepare_enable(cdns_uart_data->pclk);
1517 if (rc) {
1518 dev_err(&pdev->dev, "Unable to enable pclk clock.\n");
1519 goto err_out_unregister_driver;
1520 }
1521 rc = clk_prepare_enable(cdns_uart_data->uartclk);
1522 if (rc) {
1523 dev_err(&pdev->dev, "Unable to enable device clock.\n");
1524 goto err_out_clk_dis_pclk;
1525 }
1526
1527 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1528 if (!res) {
1529 rc = -ENODEV;
1530 goto err_out_clk_disable;
1531 }
1532
1533 irq = platform_get_irq(pdev, 0);
1534 if (irq <= 0) {
1535 rc = -ENXIO;
1536 goto err_out_clk_disable;
1537 }
1538
1539#ifdef CONFIG_COMMON_CLK
1540 cdns_uart_data->clk_rate_change_nb.notifier_call =
1541 cdns_uart_clk_notifier_cb;
1542 if (clk_notifier_register(cdns_uart_data->uartclk,
1543 &cdns_uart_data->clk_rate_change_nb))
1544 dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
1545#endif
1546
1547 /* At this point, we've got an empty uart_port struct, initialize it */
1548 spin_lock_init(&port->lock);
1549 port->type = PORT_UNKNOWN;
1550 port->iotype = UPIO_MEM32;
1551 port->flags = UPF_BOOT_AUTOCONF;
1552 port->ops = &cdns_uart_ops;
1553 port->fifosize = CDNS_UART_FIFO_SIZE;
1554 port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE);
1555 port->line = id;
1556
1557 /*
1558 * Register the port.
1559 * This function also registers this device with the tty layer
1560 * and triggers invocation of the config_port() entry point.
1561 */
1562 port->mapbase = res->start;
1563 port->irq = irq;
1564 port->dev = &pdev->dev;
1565 port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
1566 port->private_data = cdns_uart_data;
1567 cdns_uart_data->port = port;
1568 platform_set_drvdata(pdev, port);
1569
1570 pm_runtime_use_autosuspend(&pdev->dev);
1571 pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
1572 pm_runtime_set_active(&pdev->dev);
1573 pm_runtime_enable(&pdev->dev);
1574 device_init_wakeup(port->dev, true);
1575
1576#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1577 /*
1578 * If console hasn't been found yet try to assign this port
1579 * because it is required to be assigned for console setup function.
1580 * If register_console() don't assign value, then console_port pointer
1581 * is cleanup.
1582 */
1583 if (!console_port) {
1584 cdns_uart_console.index = id;
1585 console_port = port;
1586 }
1587#endif
1588
1589 rc = uart_add_one_port(&cdns_uart_uart_driver, port);
1590 if (rc) {
1591 dev_err(&pdev->dev,
1592 "uart_add_one_port() failed; err=%i\n", rc);
1593 goto err_out_pm_disable;
1594 }
1595
1596#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1597 /* This is not port which is used for console that's why clean it up */
1598 if (console_port == port &&
1599 !(cdns_uart_uart_driver.cons->flags & CON_ENABLED)) {
1600 console_port = NULL;
1601 cdns_uart_console.index = -1;
1602 }
1603#endif
1604
1605 cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node,
1606 "cts-override");
1607
1608 instances++;
1609
1610 return 0;
1611
1612err_out_pm_disable:
1613 pm_runtime_disable(&pdev->dev);
1614 pm_runtime_set_suspended(&pdev->dev);
1615 pm_runtime_dont_use_autosuspend(&pdev->dev);
1616#ifdef CONFIG_COMMON_CLK
1617 clk_notifier_unregister(cdns_uart_data->uartclk,
1618 &cdns_uart_data->clk_rate_change_nb);
1619#endif
1620err_out_clk_disable:
1621 clk_disable_unprepare(cdns_uart_data->uartclk);
1622err_out_clk_dis_pclk:
1623 clk_disable_unprepare(cdns_uart_data->pclk);
1624err_out_unregister_driver:
1625 if (!instances)
1626 uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
1627 return rc;
1628}
1629
1630/**
1631 * cdns_uart_remove - called when the platform driver is unregistered
1632 * @pdev: Pointer to the platform device structure
1633 *
1634 * Return: 0 on success, negative errno otherwise
1635 */
1636static int cdns_uart_remove(struct platform_device *pdev)
1637{
1638 struct uart_port *port = platform_get_drvdata(pdev);
1639 struct cdns_uart *cdns_uart_data = port->private_data;
1640 int rc;
1641
1642 /* Remove the cdns_uart port from the serial core */
1643#ifdef CONFIG_COMMON_CLK
1644 clk_notifier_unregister(cdns_uart_data->uartclk,
1645 &cdns_uart_data->clk_rate_change_nb);
1646#endif
1647 rc = uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port);
1648 port->mapbase = 0;
1649 clk_disable_unprepare(cdns_uart_data->uartclk);
1650 clk_disable_unprepare(cdns_uart_data->pclk);
1651 pm_runtime_disable(&pdev->dev);
1652 pm_runtime_set_suspended(&pdev->dev);
1653 pm_runtime_dont_use_autosuspend(&pdev->dev);
1654 device_init_wakeup(&pdev->dev, false);
1655
1656#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1657 if (console_port == port)
1658 console_port = NULL;
1659#endif
1660
1661 if (!--instances)
1662 uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
1663 return rc;
1664}
1665
1666static struct platform_driver cdns_uart_platform_driver = {
1667 .probe = cdns_uart_probe,
1668 .remove = cdns_uart_remove,
1669 .driver = {
1670 .name = CDNS_UART_NAME,
1671 .of_match_table = cdns_uart_of_match,
1672 .pm = &cdns_uart_dev_pm_ops,
1673 .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_XILINX_PS_UART),
1674 },
1675};
1676
1677static int __init cdns_uart_init(void)
1678{
1679 /* Register the platform driver */
1680 return platform_driver_register(&cdns_uart_platform_driver);
1681}
1682
1683static void __exit cdns_uart_exit(void)
1684{
1685 /* Unregister the platform driver */
1686 platform_driver_unregister(&cdns_uart_platform_driver);
1687}
1688
1689arch_initcall(cdns_uart_init);
1690module_exit(cdns_uart_exit);
1691
1692MODULE_DESCRIPTION("Driver for Cadence UART");
1693MODULE_AUTHOR("Xilinx Inc.");
1694MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Cadence UART driver (found in Xilinx Zynq)
4 *
5 * 2011 - 2014 (C) Xilinx Inc.
6 *
7 * This driver has originally been pushed by Xilinx using a Zynq-branding. This
8 * still shows in the naming of this file, the kconfig symbols and some symbols
9 * in the code.
10 */
11
12#if defined(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
13#define SUPPORT_SYSRQ
14#endif
15
16#include <linux/platform_device.h>
17#include <linux/serial.h>
18#include <linux/console.h>
19#include <linux/serial_core.h>
20#include <linux/slab.h>
21#include <linux/tty.h>
22#include <linux/tty_flip.h>
23#include <linux/clk.h>
24#include <linux/irq.h>
25#include <linux/io.h>
26#include <linux/of.h>
27#include <linux/module.h>
28#include <linux/pm_runtime.h>
29
30#define CDNS_UART_TTY_NAME "ttyPS"
31#define CDNS_UART_NAME "xuartps"
32#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */
33#define CDNS_UART_MINOR 0 /* works best with devtmpfs */
34#define CDNS_UART_NR_PORTS 2
35#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */
36#define CDNS_UART_REGISTER_SPACE 0x1000
37
38/* Rx Trigger level */
39static int rx_trigger_level = 56;
40module_param(rx_trigger_level, uint, S_IRUGO);
41MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
42
43/* Rx Timeout */
44static int rx_timeout = 10;
45module_param(rx_timeout, uint, S_IRUGO);
46MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
47
48/* Register offsets for the UART. */
49#define CDNS_UART_CR 0x00 /* Control Register */
50#define CDNS_UART_MR 0x04 /* Mode Register */
51#define CDNS_UART_IER 0x08 /* Interrupt Enable */
52#define CDNS_UART_IDR 0x0C /* Interrupt Disable */
53#define CDNS_UART_IMR 0x10 /* Interrupt Mask */
54#define CDNS_UART_ISR 0x14 /* Interrupt Status */
55#define CDNS_UART_BAUDGEN 0x18 /* Baud Rate Generator */
56#define CDNS_UART_RXTOUT 0x1C /* RX Timeout */
57#define CDNS_UART_RXWM 0x20 /* RX FIFO Trigger Level */
58#define CDNS_UART_MODEMCR 0x24 /* Modem Control */
59#define CDNS_UART_MODEMSR 0x28 /* Modem Status */
60#define CDNS_UART_SR 0x2C /* Channel Status */
61#define CDNS_UART_FIFO 0x30 /* FIFO */
62#define CDNS_UART_BAUDDIV 0x34 /* Baud Rate Divider */
63#define CDNS_UART_FLOWDEL 0x38 /* Flow Delay */
64#define CDNS_UART_IRRX_PWIDTH 0x3C /* IR Min Received Pulse Width */
65#define CDNS_UART_IRTX_PWIDTH 0x40 /* IR Transmitted pulse Width */
66#define CDNS_UART_TXWM 0x44 /* TX FIFO Trigger Level */
67#define CDNS_UART_RXBS 0x48 /* RX FIFO byte status register */
68
69/* Control Register Bit Definitions */
70#define CDNS_UART_CR_STOPBRK 0x00000100 /* Stop TX break */
71#define CDNS_UART_CR_STARTBRK 0x00000080 /* Set TX break */
72#define CDNS_UART_CR_TX_DIS 0x00000020 /* TX disabled. */
73#define CDNS_UART_CR_TX_EN 0x00000010 /* TX enabled */
74#define CDNS_UART_CR_RX_DIS 0x00000008 /* RX disabled. */
75#define CDNS_UART_CR_RX_EN 0x00000004 /* RX enabled */
76#define CDNS_UART_CR_TXRST 0x00000002 /* TX logic reset */
77#define CDNS_UART_CR_RXRST 0x00000001 /* RX logic reset */
78#define CDNS_UART_CR_RST_TO 0x00000040 /* Restart Timeout Counter */
79#define CDNS_UART_RXBS_PARITY 0x00000001 /* Parity error status */
80#define CDNS_UART_RXBS_FRAMING 0x00000002 /* Framing error status */
81#define CDNS_UART_RXBS_BRK 0x00000004 /* Overrun error status */
82
83/*
84 * Mode Register:
85 * The mode register (MR) defines the mode of transfer as well as the data
86 * format. If this register is modified during transmission or reception,
87 * data validity cannot be guaranteed.
88 */
89#define CDNS_UART_MR_CLKSEL 0x00000001 /* Pre-scalar selection */
90#define CDNS_UART_MR_CHMODE_L_LOOP 0x00000200 /* Local loop back mode */
91#define CDNS_UART_MR_CHMODE_NORM 0x00000000 /* Normal mode */
92#define CDNS_UART_MR_CHMODE_MASK 0x00000300 /* Mask for mode bits */
93
94#define CDNS_UART_MR_STOPMODE_2_BIT 0x00000080 /* 2 stop bits */
95#define CDNS_UART_MR_STOPMODE_1_BIT 0x00000000 /* 1 stop bit */
96
97#define CDNS_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
98#define CDNS_UART_MR_PARITY_MARK 0x00000018 /* Mark parity mode */
99#define CDNS_UART_MR_PARITY_SPACE 0x00000010 /* Space parity mode */
100#define CDNS_UART_MR_PARITY_ODD 0x00000008 /* Odd parity mode */
101#define CDNS_UART_MR_PARITY_EVEN 0x00000000 /* Even parity mode */
102
103#define CDNS_UART_MR_CHARLEN_6_BIT 0x00000006 /* 6 bits data */
104#define CDNS_UART_MR_CHARLEN_7_BIT 0x00000004 /* 7 bits data */
105#define CDNS_UART_MR_CHARLEN_8_BIT 0x00000000 /* 8 bits data */
106
107/*
108 * Interrupt Registers:
109 * Interrupt control logic uses the interrupt enable register (IER) and the
110 * interrupt disable register (IDR) to set the value of the bits in the
111 * interrupt mask register (IMR). The IMR determines whether to pass an
112 * interrupt to the interrupt status register (ISR).
113 * Writing a 1 to IER Enables an interrupt, writing a 1 to IDR disables an
114 * interrupt. IMR and ISR are read only, and IER and IDR are write only.
115 * Reading either IER or IDR returns 0x00.
116 * All four registers have the same bit definitions.
117 */
118#define CDNS_UART_IXR_TOUT 0x00000100 /* RX Timeout error interrupt */
119#define CDNS_UART_IXR_PARITY 0x00000080 /* Parity error interrupt */
120#define CDNS_UART_IXR_FRAMING 0x00000040 /* Framing error interrupt */
121#define CDNS_UART_IXR_OVERRUN 0x00000020 /* Overrun error interrupt */
122#define CDNS_UART_IXR_TXFULL 0x00000010 /* TX FIFO Full interrupt */
123#define CDNS_UART_IXR_TXEMPTY 0x00000008 /* TX FIFO empty interrupt */
124#define CDNS_UART_ISR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt */
125#define CDNS_UART_IXR_RXTRIG 0x00000001 /* RX FIFO trigger interrupt */
126#define CDNS_UART_IXR_RXFULL 0x00000004 /* RX FIFO full interrupt. */
127#define CDNS_UART_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */
128#define CDNS_UART_IXR_MASK 0x00001FFF /* Valid bit mask */
129
130 /*
131 * Do not enable parity error interrupt for the following
132 * reason: When parity error interrupt is enabled, each Rx
133 * parity error always results in 2 events. The first one
134 * being parity error interrupt and the second one with a
135 * proper Rx interrupt with the incoming data. Disabling
136 * parity error interrupt ensures better handling of parity
137 * error events. With this change, for a parity error case, we
138 * get a Rx interrupt with parity error set in ISR register
139 * and we still handle parity errors in the desired way.
140 */
141
142#define CDNS_UART_RX_IRQS (CDNS_UART_IXR_FRAMING | \
143 CDNS_UART_IXR_OVERRUN | \
144 CDNS_UART_IXR_RXTRIG | \
145 CDNS_UART_IXR_TOUT)
146
147/* Goes in read_status_mask for break detection as the HW doesn't do it*/
148#define CDNS_UART_IXR_BRK 0x00002000
149
150#define CDNS_UART_RXBS_SUPPORT BIT(1)
151/*
152 * Modem Control register:
153 * The read/write Modem Control register controls the interface with the modem
154 * or data set, or a peripheral device emulating a modem.
155 */
156#define CDNS_UART_MODEMCR_FCM 0x00000020 /* Automatic flow control mode */
157#define CDNS_UART_MODEMCR_RTS 0x00000002 /* Request to send output control */
158#define CDNS_UART_MODEMCR_DTR 0x00000001 /* Data Terminal Ready */
159
160/*
161 * Channel Status Register:
162 * The channel status register (CSR) is provided to enable the control logic
163 * to monitor the status of bits in the channel interrupt status register,
164 * even if these are masked out by the interrupt mask register.
165 */
166#define CDNS_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */
167#define CDNS_UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
168#define CDNS_UART_SR_TXFULL 0x00000010 /* TX FIFO full */
169#define CDNS_UART_SR_RXTRIG 0x00000001 /* Rx Trigger */
170
171/* baud dividers min/max values */
172#define CDNS_UART_BDIV_MIN 4
173#define CDNS_UART_BDIV_MAX 255
174#define CDNS_UART_CD_MAX 65535
175#define UART_AUTOSUSPEND_TIMEOUT 3000
176
177/**
178 * struct cdns_uart - device data
179 * @port: Pointer to the UART port
180 * @uartclk: Reference clock
181 * @pclk: APB clock
182 * @baud: Current baud rate
183 * @clk_rate_change_nb: Notifier block for clock changes
184 * @quirks: Flags for RXBS support.
185 */
186struct cdns_uart {
187 struct uart_port *port;
188 struct clk *uartclk;
189 struct clk *pclk;
190 unsigned int baud;
191 struct notifier_block clk_rate_change_nb;
192 u32 quirks;
193};
194struct cdns_platform_data {
195 u32 quirks;
196};
197#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \
198 clk_rate_change_nb);
199
200/**
201 * cdns_uart_handle_rx - Handle the received bytes along with Rx errors.
202 * @dev_id: Id of the UART port
203 * @isrstatus: The interrupt status register value as read
204 * Return: None
205 */
206static void cdns_uart_handle_rx(void *dev_id, unsigned int isrstatus)
207{
208 struct uart_port *port = (struct uart_port *)dev_id;
209 struct cdns_uart *cdns_uart = port->private_data;
210 unsigned int data;
211 unsigned int rxbs_status = 0;
212 unsigned int status_mask;
213 unsigned int framerrprocessed = 0;
214 char status = TTY_NORMAL;
215 bool is_rxbs_support;
216
217 is_rxbs_support = cdns_uart->quirks & CDNS_UART_RXBS_SUPPORT;
218
219 while ((readl(port->membase + CDNS_UART_SR) &
220 CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
221 if (is_rxbs_support)
222 rxbs_status = readl(port->membase + CDNS_UART_RXBS);
223 data = readl(port->membase + CDNS_UART_FIFO);
224 port->icount.rx++;
225 /*
226 * There is no hardware break detection in Zynq, so we interpret
227 * framing error with all-zeros data as a break sequence.
228 * Most of the time, there's another non-zero byte at the
229 * end of the sequence.
230 */
231 if (!is_rxbs_support && (isrstatus & CDNS_UART_IXR_FRAMING)) {
232 if (!data) {
233 port->read_status_mask |= CDNS_UART_IXR_BRK;
234 framerrprocessed = 1;
235 continue;
236 }
237 }
238 if (is_rxbs_support && (rxbs_status & CDNS_UART_RXBS_BRK)) {
239 port->icount.brk++;
240 status = TTY_BREAK;
241 if (uart_handle_break(port))
242 continue;
243 }
244
245 isrstatus &= port->read_status_mask;
246 isrstatus &= ~port->ignore_status_mask;
247 status_mask = port->read_status_mask;
248 status_mask &= ~port->ignore_status_mask;
249
250 if (data &&
251 (port->read_status_mask & CDNS_UART_IXR_BRK)) {
252 port->read_status_mask &= ~CDNS_UART_IXR_BRK;
253 port->icount.brk++;
254 if (uart_handle_break(port))
255 continue;
256 }
257
258 if (uart_handle_sysrq_char(port, data))
259 continue;
260
261 if (is_rxbs_support) {
262 if ((rxbs_status & CDNS_UART_RXBS_PARITY)
263 && (status_mask & CDNS_UART_IXR_PARITY)) {
264 port->icount.parity++;
265 status = TTY_PARITY;
266 }
267 if ((rxbs_status & CDNS_UART_RXBS_FRAMING)
268 && (status_mask & CDNS_UART_IXR_PARITY)) {
269 port->icount.frame++;
270 status = TTY_FRAME;
271 }
272 } else {
273 if (isrstatus & CDNS_UART_IXR_PARITY) {
274 port->icount.parity++;
275 status = TTY_PARITY;
276 }
277 if ((isrstatus & CDNS_UART_IXR_FRAMING) &&
278 !framerrprocessed) {
279 port->icount.frame++;
280 status = TTY_FRAME;
281 }
282 }
283 if (isrstatus & CDNS_UART_IXR_OVERRUN) {
284 port->icount.overrun++;
285 tty_insert_flip_char(&port->state->port, 0,
286 TTY_OVERRUN);
287 }
288 tty_insert_flip_char(&port->state->port, data, status);
289 isrstatus = 0;
290 }
291 spin_unlock(&port->lock);
292 tty_flip_buffer_push(&port->state->port);
293 spin_lock(&port->lock);
294}
295
296/**
297 * cdns_uart_handle_tx - Handle the bytes to be Txed.
298 * @dev_id: Id of the UART port
299 * Return: None
300 */
301static void cdns_uart_handle_tx(void *dev_id)
302{
303 struct uart_port *port = (struct uart_port *)dev_id;
304 unsigned int numbytes;
305
306 if (uart_circ_empty(&port->state->xmit)) {
307 writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IDR);
308 } else {
309 numbytes = port->fifosize;
310 while (numbytes && !uart_circ_empty(&port->state->xmit) &&
311 !(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)) {
312 /*
313 * Get the data from the UART circular buffer
314 * and write it to the cdns_uart's TX_FIFO
315 * register.
316 */
317 writel(
318 port->state->xmit.buf[port->state->xmit.
319 tail], port->membase + CDNS_UART_FIFO);
320
321 port->icount.tx++;
322
323 /*
324 * Adjust the tail of the UART buffer and wrap
325 * the buffer if it reaches limit.
326 */
327 port->state->xmit.tail =
328 (port->state->xmit.tail + 1) &
329 (UART_XMIT_SIZE - 1);
330
331 numbytes--;
332 }
333
334 if (uart_circ_chars_pending(
335 &port->state->xmit) < WAKEUP_CHARS)
336 uart_write_wakeup(port);
337 }
338}
339
340/**
341 * cdns_uart_isr - Interrupt handler
342 * @irq: Irq number
343 * @dev_id: Id of the port
344 *
345 * Return: IRQHANDLED
346 */
347static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
348{
349 struct uart_port *port = (struct uart_port *)dev_id;
350 unsigned int isrstatus;
351
352 spin_lock(&port->lock);
353
354 /* Read the interrupt status register to determine which
355 * interrupt(s) is/are active and clear them.
356 */
357 isrstatus = readl(port->membase + CDNS_UART_ISR);
358 writel(isrstatus, port->membase + CDNS_UART_ISR);
359
360 if (isrstatus & CDNS_UART_IXR_TXEMPTY) {
361 cdns_uart_handle_tx(dev_id);
362 isrstatus &= ~CDNS_UART_IXR_TXEMPTY;
363 }
364 if (isrstatus & CDNS_UART_IXR_MASK)
365 cdns_uart_handle_rx(dev_id, isrstatus);
366
367 spin_unlock(&port->lock);
368 return IRQ_HANDLED;
369}
370
371/**
372 * cdns_uart_calc_baud_divs - Calculate baud rate divisors
373 * @clk: UART module input clock
374 * @baud: Desired baud rate
375 * @rbdiv: BDIV value (return value)
376 * @rcd: CD value (return value)
377 * @div8: Value for clk_sel bit in mod (return value)
378 * Return: baud rate, requested baud when possible, or actual baud when there
379 * was too much error, zero if no valid divisors are found.
380 *
381 * Formula to obtain baud rate is
382 * baud_tx/rx rate = clk/CD * (BDIV + 1)
383 * input_clk = (Uart User Defined Clock or Apb Clock)
384 * depends on UCLKEN in MR Reg
385 * clk = input_clk or input_clk/8;
386 * depends on CLKS in MR reg
387 * CD and BDIV depends on values in
388 * baud rate generate register
389 * baud rate clock divisor register
390 */
391static unsigned int cdns_uart_calc_baud_divs(unsigned int clk,
392 unsigned int baud, u32 *rbdiv, u32 *rcd, int *div8)
393{
394 u32 cd, bdiv;
395 unsigned int calc_baud;
396 unsigned int bestbaud = 0;
397 unsigned int bauderror;
398 unsigned int besterror = ~0;
399
400 if (baud < clk / ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX)) {
401 *div8 = 1;
402 clk /= 8;
403 } else {
404 *div8 = 0;
405 }
406
407 for (bdiv = CDNS_UART_BDIV_MIN; bdiv <= CDNS_UART_BDIV_MAX; bdiv++) {
408 cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1));
409 if (cd < 1 || cd > CDNS_UART_CD_MAX)
410 continue;
411
412 calc_baud = clk / (cd * (bdiv + 1));
413
414 if (baud > calc_baud)
415 bauderror = baud - calc_baud;
416 else
417 bauderror = calc_baud - baud;
418
419 if (besterror > bauderror) {
420 *rbdiv = bdiv;
421 *rcd = cd;
422 bestbaud = calc_baud;
423 besterror = bauderror;
424 }
425 }
426 /* use the values when percent error is acceptable */
427 if (((besterror * 100) / baud) < 3)
428 bestbaud = baud;
429
430 return bestbaud;
431}
432
433/**
434 * cdns_uart_set_baud_rate - Calculate and set the baud rate
435 * @port: Handle to the uart port structure
436 * @baud: Baud rate to set
437 * Return: baud rate, requested baud when possible, or actual baud when there
438 * was too much error, zero if no valid divisors are found.
439 */
440static unsigned int cdns_uart_set_baud_rate(struct uart_port *port,
441 unsigned int baud)
442{
443 unsigned int calc_baud;
444 u32 cd = 0, bdiv = 0;
445 u32 mreg;
446 int div8;
447 struct cdns_uart *cdns_uart = port->private_data;
448
449 calc_baud = cdns_uart_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
450 &div8);
451
452 /* Write new divisors to hardware */
453 mreg = readl(port->membase + CDNS_UART_MR);
454 if (div8)
455 mreg |= CDNS_UART_MR_CLKSEL;
456 else
457 mreg &= ~CDNS_UART_MR_CLKSEL;
458 writel(mreg, port->membase + CDNS_UART_MR);
459 writel(cd, port->membase + CDNS_UART_BAUDGEN);
460 writel(bdiv, port->membase + CDNS_UART_BAUDDIV);
461 cdns_uart->baud = baud;
462
463 return calc_baud;
464}
465
466#ifdef CONFIG_COMMON_CLK
467/**
468 * cdns_uart_clk_notitifer_cb - Clock notifier callback
469 * @nb: Notifier block
470 * @event: Notify event
471 * @data: Notifier data
472 * Return: NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error.
473 */
474static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
475 unsigned long event, void *data)
476{
477 u32 ctrl_reg;
478 struct uart_port *port;
479 int locked = 0;
480 struct clk_notifier_data *ndata = data;
481 unsigned long flags = 0;
482 struct cdns_uart *cdns_uart = to_cdns_uart(nb);
483
484 port = cdns_uart->port;
485 if (port->suspended)
486 return NOTIFY_OK;
487
488 switch (event) {
489 case PRE_RATE_CHANGE:
490 {
491 u32 bdiv, cd;
492 int div8;
493
494 /*
495 * Find out if current baud-rate can be achieved with new clock
496 * frequency.
497 */
498 if (!cdns_uart_calc_baud_divs(ndata->new_rate, cdns_uart->baud,
499 &bdiv, &cd, &div8)) {
500 dev_warn(port->dev, "clock rate change rejected\n");
501 return NOTIFY_BAD;
502 }
503
504 spin_lock_irqsave(&cdns_uart->port->lock, flags);
505
506 /* Disable the TX and RX to set baud rate */
507 ctrl_reg = readl(port->membase + CDNS_UART_CR);
508 ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
509 writel(ctrl_reg, port->membase + CDNS_UART_CR);
510
511 spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
512
513 return NOTIFY_OK;
514 }
515 case POST_RATE_CHANGE:
516 /*
517 * Set clk dividers to generate correct baud with new clock
518 * frequency.
519 */
520
521 spin_lock_irqsave(&cdns_uart->port->lock, flags);
522
523 locked = 1;
524 port->uartclk = ndata->new_rate;
525
526 cdns_uart->baud = cdns_uart_set_baud_rate(cdns_uart->port,
527 cdns_uart->baud);
528 /* fall through */
529 case ABORT_RATE_CHANGE:
530 if (!locked)
531 spin_lock_irqsave(&cdns_uart->port->lock, flags);
532
533 /* Set TX/RX Reset */
534 ctrl_reg = readl(port->membase + CDNS_UART_CR);
535 ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
536 writel(ctrl_reg, port->membase + CDNS_UART_CR);
537
538 while (readl(port->membase + CDNS_UART_CR) &
539 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
540 cpu_relax();
541
542 /*
543 * Clear the RX disable and TX disable bits and then set the TX
544 * enable bit and RX enable bit to enable the transmitter and
545 * receiver.
546 */
547 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
548 ctrl_reg = readl(port->membase + CDNS_UART_CR);
549 ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
550 ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
551 writel(ctrl_reg, port->membase + CDNS_UART_CR);
552
553 spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
554
555 return NOTIFY_OK;
556 default:
557 return NOTIFY_DONE;
558 }
559}
560#endif
561
562/**
563 * cdns_uart_start_tx - Start transmitting bytes
564 * @port: Handle to the uart port structure
565 */
566static void cdns_uart_start_tx(struct uart_port *port)
567{
568 unsigned int status;
569
570 if (uart_tx_stopped(port))
571 return;
572
573 /*
574 * Set the TX enable bit and clear the TX disable bit to enable the
575 * transmitter.
576 */
577 status = readl(port->membase + CDNS_UART_CR);
578 status &= ~CDNS_UART_CR_TX_DIS;
579 status |= CDNS_UART_CR_TX_EN;
580 writel(status, port->membase + CDNS_UART_CR);
581
582 if (uart_circ_empty(&port->state->xmit))
583 return;
584
585 cdns_uart_handle_tx(port);
586
587 writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR);
588 /* Enable the TX Empty interrupt */
589 writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IER);
590}
591
592/**
593 * cdns_uart_stop_tx - Stop TX
594 * @port: Handle to the uart port structure
595 */
596static void cdns_uart_stop_tx(struct uart_port *port)
597{
598 unsigned int regval;
599
600 regval = readl(port->membase + CDNS_UART_CR);
601 regval |= CDNS_UART_CR_TX_DIS;
602 /* Disable the transmitter */
603 writel(regval, port->membase + CDNS_UART_CR);
604}
605
606/**
607 * cdns_uart_stop_rx - Stop RX
608 * @port: Handle to the uart port structure
609 */
610static void cdns_uart_stop_rx(struct uart_port *port)
611{
612 unsigned int regval;
613
614 /* Disable RX IRQs */
615 writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IDR);
616
617 /* Disable the receiver */
618 regval = readl(port->membase + CDNS_UART_CR);
619 regval |= CDNS_UART_CR_RX_DIS;
620 writel(regval, port->membase + CDNS_UART_CR);
621}
622
623/**
624 * cdns_uart_tx_empty - Check whether TX is empty
625 * @port: Handle to the uart port structure
626 *
627 * Return: TIOCSER_TEMT on success, 0 otherwise
628 */
629static unsigned int cdns_uart_tx_empty(struct uart_port *port)
630{
631 unsigned int status;
632
633 status = readl(port->membase + CDNS_UART_SR) &
634 CDNS_UART_SR_TXEMPTY;
635 return status ? TIOCSER_TEMT : 0;
636}
637
638/**
639 * cdns_uart_break_ctl - Based on the input ctl we have to start or stop
640 * transmitting char breaks
641 * @port: Handle to the uart port structure
642 * @ctl: Value based on which start or stop decision is taken
643 */
644static void cdns_uart_break_ctl(struct uart_port *port, int ctl)
645{
646 unsigned int status;
647 unsigned long flags;
648
649 spin_lock_irqsave(&port->lock, flags);
650
651 status = readl(port->membase + CDNS_UART_CR);
652
653 if (ctl == -1)
654 writel(CDNS_UART_CR_STARTBRK | status,
655 port->membase + CDNS_UART_CR);
656 else {
657 if ((status & CDNS_UART_CR_STOPBRK) == 0)
658 writel(CDNS_UART_CR_STOPBRK | status,
659 port->membase + CDNS_UART_CR);
660 }
661 spin_unlock_irqrestore(&port->lock, flags);
662}
663
664/**
665 * cdns_uart_set_termios - termios operations, handling data length, parity,
666 * stop bits, flow control, baud rate
667 * @port: Handle to the uart port structure
668 * @termios: Handle to the input termios structure
669 * @old: Values of the previously saved termios structure
670 */
671static void cdns_uart_set_termios(struct uart_port *port,
672 struct ktermios *termios, struct ktermios *old)
673{
674 unsigned int cval = 0;
675 unsigned int baud, minbaud, maxbaud;
676 unsigned long flags;
677 unsigned int ctrl_reg, mode_reg;
678
679 spin_lock_irqsave(&port->lock, flags);
680
681 /* Wait for the transmit FIFO to empty before making changes */
682 if (!(readl(port->membase + CDNS_UART_CR) &
683 CDNS_UART_CR_TX_DIS)) {
684 while (!(readl(port->membase + CDNS_UART_SR) &
685 CDNS_UART_SR_TXEMPTY)) {
686 cpu_relax();
687 }
688 }
689
690 /* Disable the TX and RX to set baud rate */
691 ctrl_reg = readl(port->membase + CDNS_UART_CR);
692 ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
693 writel(ctrl_reg, port->membase + CDNS_UART_CR);
694
695 /*
696 * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
697 * min and max baud should be calculated here based on port->uartclk.
698 * this way we get a valid baud and can safely call set_baud()
699 */
700 minbaud = port->uartclk /
701 ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX * 8);
702 maxbaud = port->uartclk / (CDNS_UART_BDIV_MIN + 1);
703 baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud);
704 baud = cdns_uart_set_baud_rate(port, baud);
705 if (tty_termios_baud_rate(termios))
706 tty_termios_encode_baud_rate(termios, baud, baud);
707
708 /* Update the per-port timeout. */
709 uart_update_timeout(port, termios->c_cflag, baud);
710
711 /* Set TX/RX Reset */
712 ctrl_reg = readl(port->membase + CDNS_UART_CR);
713 ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
714 writel(ctrl_reg, port->membase + CDNS_UART_CR);
715
716 while (readl(port->membase + CDNS_UART_CR) &
717 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
718 cpu_relax();
719
720 /*
721 * Clear the RX disable and TX disable bits and then set the TX enable
722 * bit and RX enable bit to enable the transmitter and receiver.
723 */
724 ctrl_reg = readl(port->membase + CDNS_UART_CR);
725 ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
726 ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
727 writel(ctrl_reg, port->membase + CDNS_UART_CR);
728
729 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
730
731 port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG |
732 CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT;
733 port->ignore_status_mask = 0;
734
735 if (termios->c_iflag & INPCK)
736 port->read_status_mask |= CDNS_UART_IXR_PARITY |
737 CDNS_UART_IXR_FRAMING;
738
739 if (termios->c_iflag & IGNPAR)
740 port->ignore_status_mask |= CDNS_UART_IXR_PARITY |
741 CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
742
743 /* ignore all characters if CREAD is not set */
744 if ((termios->c_cflag & CREAD) == 0)
745 port->ignore_status_mask |= CDNS_UART_IXR_RXTRIG |
746 CDNS_UART_IXR_TOUT | CDNS_UART_IXR_PARITY |
747 CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
748
749 mode_reg = readl(port->membase + CDNS_UART_MR);
750
751 /* Handling Data Size */
752 switch (termios->c_cflag & CSIZE) {
753 case CS6:
754 cval |= CDNS_UART_MR_CHARLEN_6_BIT;
755 break;
756 case CS7:
757 cval |= CDNS_UART_MR_CHARLEN_7_BIT;
758 break;
759 default:
760 case CS8:
761 cval |= CDNS_UART_MR_CHARLEN_8_BIT;
762 termios->c_cflag &= ~CSIZE;
763 termios->c_cflag |= CS8;
764 break;
765 }
766
767 /* Handling Parity and Stop Bits length */
768 if (termios->c_cflag & CSTOPB)
769 cval |= CDNS_UART_MR_STOPMODE_2_BIT; /* 2 STOP bits */
770 else
771 cval |= CDNS_UART_MR_STOPMODE_1_BIT; /* 1 STOP bit */
772
773 if (termios->c_cflag & PARENB) {
774 /* Mark or Space parity */
775 if (termios->c_cflag & CMSPAR) {
776 if (termios->c_cflag & PARODD)
777 cval |= CDNS_UART_MR_PARITY_MARK;
778 else
779 cval |= CDNS_UART_MR_PARITY_SPACE;
780 } else {
781 if (termios->c_cflag & PARODD)
782 cval |= CDNS_UART_MR_PARITY_ODD;
783 else
784 cval |= CDNS_UART_MR_PARITY_EVEN;
785 }
786 } else {
787 cval |= CDNS_UART_MR_PARITY_NONE;
788 }
789 cval |= mode_reg & 1;
790 writel(cval, port->membase + CDNS_UART_MR);
791
792 spin_unlock_irqrestore(&port->lock, flags);
793}
794
795/**
796 * cdns_uart_startup - Called when an application opens a cdns_uart port
797 * @port: Handle to the uart port structure
798 *
799 * Return: 0 on success, negative errno otherwise
800 */
801static int cdns_uart_startup(struct uart_port *port)
802{
803 struct cdns_uart *cdns_uart = port->private_data;
804 bool is_brk_support;
805 int ret;
806 unsigned long flags;
807 unsigned int status = 0;
808
809 is_brk_support = cdns_uart->quirks & CDNS_UART_RXBS_SUPPORT;
810
811 spin_lock_irqsave(&port->lock, flags);
812
813 /* Disable the TX and RX */
814 writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
815 port->membase + CDNS_UART_CR);
816
817 /* Set the Control Register with TX/RX Enable, TX/RX Reset,
818 * no break chars.
819 */
820 writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
821 port->membase + CDNS_UART_CR);
822
823 while (readl(port->membase + CDNS_UART_CR) &
824 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
825 cpu_relax();
826
827 /*
828 * Clear the RX disable bit and then set the RX enable bit to enable
829 * the receiver.
830 */
831 status = readl(port->membase + CDNS_UART_CR);
832 status &= CDNS_UART_CR_RX_DIS;
833 status |= CDNS_UART_CR_RX_EN;
834 writel(status, port->membase + CDNS_UART_CR);
835
836 /* Set the Mode Register with normal mode,8 data bits,1 stop bit,
837 * no parity.
838 */
839 writel(CDNS_UART_MR_CHMODE_NORM | CDNS_UART_MR_STOPMODE_1_BIT
840 | CDNS_UART_MR_PARITY_NONE | CDNS_UART_MR_CHARLEN_8_BIT,
841 port->membase + CDNS_UART_MR);
842
843 /*
844 * Set the RX FIFO Trigger level to use most of the FIFO, but it
845 * can be tuned with a module parameter
846 */
847 writel(rx_trigger_level, port->membase + CDNS_UART_RXWM);
848
849 /*
850 * Receive Timeout register is enabled but it
851 * can be tuned with a module parameter
852 */
853 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
854
855 /* Clear out any pending interrupts before enabling them */
856 writel(readl(port->membase + CDNS_UART_ISR),
857 port->membase + CDNS_UART_ISR);
858
859 spin_unlock_irqrestore(&port->lock, flags);
860
861 ret = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME, port);
862 if (ret) {
863 dev_err(port->dev, "request_irq '%d' failed with %d\n",
864 port->irq, ret);
865 return ret;
866 }
867
868 /* Set the Interrupt Registers with desired interrupts */
869 if (is_brk_support)
870 writel(CDNS_UART_RX_IRQS | CDNS_UART_IXR_BRK,
871 port->membase + CDNS_UART_IER);
872 else
873 writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IER);
874
875 return 0;
876}
877
878/**
879 * cdns_uart_shutdown - Called when an application closes a cdns_uart port
880 * @port: Handle to the uart port structure
881 */
882static void cdns_uart_shutdown(struct uart_port *port)
883{
884 int status;
885 unsigned long flags;
886
887 spin_lock_irqsave(&port->lock, flags);
888
889 /* Disable interrupts */
890 status = readl(port->membase + CDNS_UART_IMR);
891 writel(status, port->membase + CDNS_UART_IDR);
892 writel(0xffffffff, port->membase + CDNS_UART_ISR);
893
894 /* Disable the TX and RX */
895 writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
896 port->membase + CDNS_UART_CR);
897
898 spin_unlock_irqrestore(&port->lock, flags);
899
900 free_irq(port->irq, port);
901}
902
903/**
904 * cdns_uart_type - Set UART type to cdns_uart port
905 * @port: Handle to the uart port structure
906 *
907 * Return: string on success, NULL otherwise
908 */
909static const char *cdns_uart_type(struct uart_port *port)
910{
911 return port->type == PORT_XUARTPS ? CDNS_UART_NAME : NULL;
912}
913
914/**
915 * cdns_uart_verify_port - Verify the port params
916 * @port: Handle to the uart port structure
917 * @ser: Handle to the structure whose members are compared
918 *
919 * Return: 0 on success, negative errno otherwise.
920 */
921static int cdns_uart_verify_port(struct uart_port *port,
922 struct serial_struct *ser)
923{
924 if (ser->type != PORT_UNKNOWN && ser->type != PORT_XUARTPS)
925 return -EINVAL;
926 if (port->irq != ser->irq)
927 return -EINVAL;
928 if (ser->io_type != UPIO_MEM)
929 return -EINVAL;
930 if (port->iobase != ser->port)
931 return -EINVAL;
932 if (ser->hub6 != 0)
933 return -EINVAL;
934 return 0;
935}
936
937/**
938 * cdns_uart_request_port - Claim the memory region attached to cdns_uart port,
939 * called when the driver adds a cdns_uart port via
940 * uart_add_one_port()
941 * @port: Handle to the uart port structure
942 *
943 * Return: 0 on success, negative errno otherwise.
944 */
945static int cdns_uart_request_port(struct uart_port *port)
946{
947 if (!request_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE,
948 CDNS_UART_NAME)) {
949 return -ENOMEM;
950 }
951
952 port->membase = ioremap(port->mapbase, CDNS_UART_REGISTER_SPACE);
953 if (!port->membase) {
954 dev_err(port->dev, "Unable to map registers\n");
955 release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
956 return -ENOMEM;
957 }
958 return 0;
959}
960
961/**
962 * cdns_uart_release_port - Release UART port
963 * @port: Handle to the uart port structure
964 *
965 * Release the memory region attached to a cdns_uart port. Called when the
966 * driver removes a cdns_uart port via uart_remove_one_port().
967 */
968static void cdns_uart_release_port(struct uart_port *port)
969{
970 release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
971 iounmap(port->membase);
972 port->membase = NULL;
973}
974
975/**
976 * cdns_uart_config_port - Configure UART port
977 * @port: Handle to the uart port structure
978 * @flags: If any
979 */
980static void cdns_uart_config_port(struct uart_port *port, int flags)
981{
982 if (flags & UART_CONFIG_TYPE && cdns_uart_request_port(port) == 0)
983 port->type = PORT_XUARTPS;
984}
985
986/**
987 * cdns_uart_get_mctrl - Get the modem control state
988 * @port: Handle to the uart port structure
989 *
990 * Return: the modem control state
991 */
992static unsigned int cdns_uart_get_mctrl(struct uart_port *port)
993{
994 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
995}
996
997static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
998{
999 u32 val;
1000 u32 mode_reg;
1001
1002 val = readl(port->membase + CDNS_UART_MODEMCR);
1003 mode_reg = readl(port->membase + CDNS_UART_MR);
1004
1005 val &= ~(CDNS_UART_MODEMCR_RTS | CDNS_UART_MODEMCR_DTR);
1006 mode_reg &= ~CDNS_UART_MR_CHMODE_MASK;
1007
1008 if (mctrl & TIOCM_RTS)
1009 val |= CDNS_UART_MODEMCR_RTS;
1010 if (mctrl & TIOCM_DTR)
1011 val |= CDNS_UART_MODEMCR_DTR;
1012 if (mctrl & TIOCM_LOOP)
1013 mode_reg |= CDNS_UART_MR_CHMODE_L_LOOP;
1014 else
1015 mode_reg |= CDNS_UART_MR_CHMODE_NORM;
1016
1017 writel(val, port->membase + CDNS_UART_MODEMCR);
1018 writel(mode_reg, port->membase + CDNS_UART_MR);
1019}
1020
1021#ifdef CONFIG_CONSOLE_POLL
1022static int cdns_uart_poll_get_char(struct uart_port *port)
1023{
1024 int c;
1025 unsigned long flags;
1026
1027 spin_lock_irqsave(&port->lock, flags);
1028
1029 /* Check if FIFO is empty */
1030 if (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_RXEMPTY)
1031 c = NO_POLL_CHAR;
1032 else /* Read a character */
1033 c = (unsigned char) readl(port->membase + CDNS_UART_FIFO);
1034
1035 spin_unlock_irqrestore(&port->lock, flags);
1036
1037 return c;
1038}
1039
1040static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c)
1041{
1042 unsigned long flags;
1043
1044 spin_lock_irqsave(&port->lock, flags);
1045
1046 /* Wait until FIFO is empty */
1047 while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
1048 cpu_relax();
1049
1050 /* Write a character */
1051 writel(c, port->membase + CDNS_UART_FIFO);
1052
1053 /* Wait until FIFO is empty */
1054 while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
1055 cpu_relax();
1056
1057 spin_unlock_irqrestore(&port->lock, flags);
1058
1059 return;
1060}
1061#endif
1062
1063static void cdns_uart_pm(struct uart_port *port, unsigned int state,
1064 unsigned int oldstate)
1065{
1066 switch (state) {
1067 case UART_PM_STATE_OFF:
1068 pm_runtime_mark_last_busy(port->dev);
1069 pm_runtime_put_autosuspend(port->dev);
1070 break;
1071 default:
1072 pm_runtime_get_sync(port->dev);
1073 break;
1074 }
1075}
1076
1077static const struct uart_ops cdns_uart_ops = {
1078 .set_mctrl = cdns_uart_set_mctrl,
1079 .get_mctrl = cdns_uart_get_mctrl,
1080 .start_tx = cdns_uart_start_tx,
1081 .stop_tx = cdns_uart_stop_tx,
1082 .stop_rx = cdns_uart_stop_rx,
1083 .tx_empty = cdns_uart_tx_empty,
1084 .break_ctl = cdns_uart_break_ctl,
1085 .set_termios = cdns_uart_set_termios,
1086 .startup = cdns_uart_startup,
1087 .shutdown = cdns_uart_shutdown,
1088 .pm = cdns_uart_pm,
1089 .type = cdns_uart_type,
1090 .verify_port = cdns_uart_verify_port,
1091 .request_port = cdns_uart_request_port,
1092 .release_port = cdns_uart_release_port,
1093 .config_port = cdns_uart_config_port,
1094#ifdef CONFIG_CONSOLE_POLL
1095 .poll_get_char = cdns_uart_poll_get_char,
1096 .poll_put_char = cdns_uart_poll_put_char,
1097#endif
1098};
1099
1100static struct uart_port cdns_uart_port[CDNS_UART_NR_PORTS];
1101
1102/**
1103 * cdns_uart_get_port - Configure the port from platform device resource info
1104 * @id: Port id
1105 *
1106 * Return: a pointer to a uart_port or NULL for failure
1107 */
1108static struct uart_port *cdns_uart_get_port(int id)
1109{
1110 struct uart_port *port;
1111
1112 /* Try the given port id if failed use default method */
1113 if (id < CDNS_UART_NR_PORTS && cdns_uart_port[id].mapbase != 0) {
1114 /* Find the next unused port */
1115 for (id = 0; id < CDNS_UART_NR_PORTS; id++)
1116 if (cdns_uart_port[id].mapbase == 0)
1117 break;
1118 }
1119
1120 if (id >= CDNS_UART_NR_PORTS)
1121 return NULL;
1122
1123 port = &cdns_uart_port[id];
1124
1125 /* At this point, we've got an empty uart_port struct, initialize it */
1126 spin_lock_init(&port->lock);
1127 port->membase = NULL;
1128 port->irq = 0;
1129 port->type = PORT_UNKNOWN;
1130 port->iotype = UPIO_MEM32;
1131 port->flags = UPF_BOOT_AUTOCONF;
1132 port->ops = &cdns_uart_ops;
1133 port->fifosize = CDNS_UART_FIFO_SIZE;
1134 port->line = id;
1135 port->dev = NULL;
1136 return port;
1137}
1138
1139#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1140/**
1141 * cdns_uart_console_wait_tx - Wait for the TX to be full
1142 * @port: Handle to the uart port structure
1143 */
1144static void cdns_uart_console_wait_tx(struct uart_port *port)
1145{
1146 while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
1147 barrier();
1148}
1149
1150/**
1151 * cdns_uart_console_putchar - write the character to the FIFO buffer
1152 * @port: Handle to the uart port structure
1153 * @ch: Character to be written
1154 */
1155static void cdns_uart_console_putchar(struct uart_port *port, int ch)
1156{
1157 cdns_uart_console_wait_tx(port);
1158 writel(ch, port->membase + CDNS_UART_FIFO);
1159}
1160
1161static void cdns_early_write(struct console *con, const char *s,
1162 unsigned n)
1163{
1164 struct earlycon_device *dev = con->data;
1165
1166 uart_console_write(&dev->port, s, n, cdns_uart_console_putchar);
1167}
1168
1169static int __init cdns_early_console_setup(struct earlycon_device *device,
1170 const char *opt)
1171{
1172 struct uart_port *port = &device->port;
1173
1174 if (!port->membase)
1175 return -ENODEV;
1176
1177 /* initialise control register */
1178 writel(CDNS_UART_CR_TX_EN|CDNS_UART_CR_TXRST|CDNS_UART_CR_RXRST,
1179 port->membase + CDNS_UART_CR);
1180
1181 /* only set baud if specified on command line - otherwise
1182 * assume it has been initialized by a boot loader.
1183 */
1184 if (port->uartclk && device->baud) {
1185 u32 cd = 0, bdiv = 0;
1186 u32 mr;
1187 int div8;
1188
1189 cdns_uart_calc_baud_divs(port->uartclk, device->baud,
1190 &bdiv, &cd, &div8);
1191 mr = CDNS_UART_MR_PARITY_NONE;
1192 if (div8)
1193 mr |= CDNS_UART_MR_CLKSEL;
1194
1195 writel(mr, port->membase + CDNS_UART_MR);
1196 writel(cd, port->membase + CDNS_UART_BAUDGEN);
1197 writel(bdiv, port->membase + CDNS_UART_BAUDDIV);
1198 }
1199
1200 device->con->write = cdns_early_write;
1201
1202 return 0;
1203}
1204OF_EARLYCON_DECLARE(cdns, "xlnx,xuartps", cdns_early_console_setup);
1205OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p8", cdns_early_console_setup);
1206OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p12", cdns_early_console_setup);
1207OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
1208
1209/**
1210 * cdns_uart_console_write - perform write operation
1211 * @co: Console handle
1212 * @s: Pointer to character array
1213 * @count: No of characters
1214 */
1215static void cdns_uart_console_write(struct console *co, const char *s,
1216 unsigned int count)
1217{
1218 struct uart_port *port = &cdns_uart_port[co->index];
1219 unsigned long flags;
1220 unsigned int imr, ctrl;
1221 int locked = 1;
1222
1223 if (port->sysrq)
1224 locked = 0;
1225 else if (oops_in_progress)
1226 locked = spin_trylock_irqsave(&port->lock, flags);
1227 else
1228 spin_lock_irqsave(&port->lock, flags);
1229
1230 /* save and disable interrupt */
1231 imr = readl(port->membase + CDNS_UART_IMR);
1232 writel(imr, port->membase + CDNS_UART_IDR);
1233
1234 /*
1235 * Make sure that the tx part is enabled. Set the TX enable bit and
1236 * clear the TX disable bit to enable the transmitter.
1237 */
1238 ctrl = readl(port->membase + CDNS_UART_CR);
1239 ctrl &= ~CDNS_UART_CR_TX_DIS;
1240 ctrl |= CDNS_UART_CR_TX_EN;
1241 writel(ctrl, port->membase + CDNS_UART_CR);
1242
1243 uart_console_write(port, s, count, cdns_uart_console_putchar);
1244 cdns_uart_console_wait_tx(port);
1245
1246 writel(ctrl, port->membase + CDNS_UART_CR);
1247
1248 /* restore interrupt state */
1249 writel(imr, port->membase + CDNS_UART_IER);
1250
1251 if (locked)
1252 spin_unlock_irqrestore(&port->lock, flags);
1253}
1254
1255/**
1256 * cdns_uart_console_setup - Initialize the uart to default config
1257 * @co: Console handle
1258 * @options: Initial settings of uart
1259 *
1260 * Return: 0 on success, negative errno otherwise.
1261 */
1262static int __init cdns_uart_console_setup(struct console *co, char *options)
1263{
1264 struct uart_port *port = &cdns_uart_port[co->index];
1265 int baud = 9600;
1266 int bits = 8;
1267 int parity = 'n';
1268 int flow = 'n';
1269
1270 if (co->index < 0 || co->index >= CDNS_UART_NR_PORTS)
1271 return -EINVAL;
1272
1273 if (!port->membase) {
1274 pr_debug("console on " CDNS_UART_TTY_NAME "%i not present\n",
1275 co->index);
1276 return -ENODEV;
1277 }
1278
1279 if (options)
1280 uart_parse_options(options, &baud, &parity, &bits, &flow);
1281
1282 return uart_set_options(port, co, baud, parity, bits, flow);
1283}
1284
1285static struct uart_driver cdns_uart_uart_driver;
1286
1287static struct console cdns_uart_console = {
1288 .name = CDNS_UART_TTY_NAME,
1289 .write = cdns_uart_console_write,
1290 .device = uart_console_device,
1291 .setup = cdns_uart_console_setup,
1292 .flags = CON_PRINTBUFFER,
1293 .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
1294 .data = &cdns_uart_uart_driver,
1295};
1296
1297/**
1298 * cdns_uart_console_init - Initialization call
1299 *
1300 * Return: 0 on success, negative errno otherwise
1301 */
1302static int __init cdns_uart_console_init(void)
1303{
1304 register_console(&cdns_uart_console);
1305 return 0;
1306}
1307
1308console_initcall(cdns_uart_console_init);
1309
1310#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
1311
1312static struct uart_driver cdns_uart_uart_driver = {
1313 .owner = THIS_MODULE,
1314 .driver_name = CDNS_UART_NAME,
1315 .dev_name = CDNS_UART_TTY_NAME,
1316 .major = CDNS_UART_MAJOR,
1317 .minor = CDNS_UART_MINOR,
1318 .nr = CDNS_UART_NR_PORTS,
1319#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1320 .cons = &cdns_uart_console,
1321#endif
1322};
1323
1324#ifdef CONFIG_PM_SLEEP
1325/**
1326 * cdns_uart_suspend - suspend event
1327 * @device: Pointer to the device structure
1328 *
1329 * Return: 0
1330 */
1331static int cdns_uart_suspend(struct device *device)
1332{
1333 struct uart_port *port = dev_get_drvdata(device);
1334 struct tty_struct *tty;
1335 struct device *tty_dev;
1336 int may_wake = 0;
1337
1338 /* Get the tty which could be NULL so don't assume it's valid */
1339 tty = tty_port_tty_get(&port->state->port);
1340 if (tty) {
1341 tty_dev = tty->dev;
1342 may_wake = device_may_wakeup(tty_dev);
1343 tty_kref_put(tty);
1344 }
1345
1346 /*
1347 * Call the API provided in serial_core.c file which handles
1348 * the suspend.
1349 */
1350 uart_suspend_port(&cdns_uart_uart_driver, port);
1351 if (!(console_suspend_enabled && !may_wake)) {
1352 unsigned long flags = 0;
1353
1354 spin_lock_irqsave(&port->lock, flags);
1355 /* Empty the receive FIFO 1st before making changes */
1356 while (!(readl(port->membase + CDNS_UART_SR) &
1357 CDNS_UART_SR_RXEMPTY))
1358 readl(port->membase + CDNS_UART_FIFO);
1359 /* set RX trigger level to 1 */
1360 writel(1, port->membase + CDNS_UART_RXWM);
1361 /* disable RX timeout interrups */
1362 writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IDR);
1363 spin_unlock_irqrestore(&port->lock, flags);
1364 }
1365
1366 return 0;
1367}
1368
1369/**
1370 * cdns_uart_resume - Resume after a previous suspend
1371 * @device: Pointer to the device structure
1372 *
1373 * Return: 0
1374 */
1375static int cdns_uart_resume(struct device *device)
1376{
1377 struct uart_port *port = dev_get_drvdata(device);
1378 unsigned long flags = 0;
1379 u32 ctrl_reg;
1380 struct tty_struct *tty;
1381 struct device *tty_dev;
1382 int may_wake = 0;
1383
1384 /* Get the tty which could be NULL so don't assume it's valid */
1385 tty = tty_port_tty_get(&port->state->port);
1386 if (tty) {
1387 tty_dev = tty->dev;
1388 may_wake = device_may_wakeup(tty_dev);
1389 tty_kref_put(tty);
1390 }
1391
1392 if (console_suspend_enabled && !may_wake) {
1393 struct cdns_uart *cdns_uart = port->private_data;
1394
1395 clk_enable(cdns_uart->pclk);
1396 clk_enable(cdns_uart->uartclk);
1397
1398 spin_lock_irqsave(&port->lock, flags);
1399
1400 /* Set TX/RX Reset */
1401 ctrl_reg = readl(port->membase + CDNS_UART_CR);
1402 ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
1403 writel(ctrl_reg, port->membase + CDNS_UART_CR);
1404 while (readl(port->membase + CDNS_UART_CR) &
1405 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
1406 cpu_relax();
1407
1408 /* restore rx timeout value */
1409 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
1410 /* Enable Tx/Rx */
1411 ctrl_reg = readl(port->membase + CDNS_UART_CR);
1412 ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
1413 ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
1414 writel(ctrl_reg, port->membase + CDNS_UART_CR);
1415
1416 clk_disable(cdns_uart->uartclk);
1417 clk_disable(cdns_uart->pclk);
1418 spin_unlock_irqrestore(&port->lock, flags);
1419 } else {
1420 spin_lock_irqsave(&port->lock, flags);
1421 /* restore original rx trigger level */
1422 writel(rx_trigger_level, port->membase + CDNS_UART_RXWM);
1423 /* enable RX timeout interrupt */
1424 writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IER);
1425 spin_unlock_irqrestore(&port->lock, flags);
1426 }
1427
1428 return uart_resume_port(&cdns_uart_uart_driver, port);
1429}
1430#endif /* ! CONFIG_PM_SLEEP */
1431static int __maybe_unused cdns_runtime_suspend(struct device *dev)
1432{
1433 struct platform_device *pdev = to_platform_device(dev);
1434 struct uart_port *port = platform_get_drvdata(pdev);
1435 struct cdns_uart *cdns_uart = port->private_data;
1436
1437 clk_disable(cdns_uart->uartclk);
1438 clk_disable(cdns_uart->pclk);
1439 return 0;
1440};
1441
1442static int __maybe_unused cdns_runtime_resume(struct device *dev)
1443{
1444 struct platform_device *pdev = to_platform_device(dev);
1445 struct uart_port *port = platform_get_drvdata(pdev);
1446 struct cdns_uart *cdns_uart = port->private_data;
1447
1448 clk_enable(cdns_uart->pclk);
1449 clk_enable(cdns_uart->uartclk);
1450 return 0;
1451};
1452
1453static const struct dev_pm_ops cdns_uart_dev_pm_ops = {
1454 SET_SYSTEM_SLEEP_PM_OPS(cdns_uart_suspend, cdns_uart_resume)
1455 SET_RUNTIME_PM_OPS(cdns_runtime_suspend,
1456 cdns_runtime_resume, NULL)
1457};
1458
1459static const struct cdns_platform_data zynqmp_uart_def = {
1460 .quirks = CDNS_UART_RXBS_SUPPORT, };
1461
1462/* Match table for of_platform binding */
1463static const struct of_device_id cdns_uart_of_match[] = {
1464 { .compatible = "xlnx,xuartps", },
1465 { .compatible = "cdns,uart-r1p8", },
1466 { .compatible = "cdns,uart-r1p12", .data = &zynqmp_uart_def },
1467 { .compatible = "xlnx,zynqmp-uart", .data = &zynqmp_uart_def },
1468 {}
1469};
1470MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
1471
1472/**
1473 * cdns_uart_probe - Platform driver probe
1474 * @pdev: Pointer to the platform device structure
1475 *
1476 * Return: 0 on success, negative errno otherwise
1477 */
1478static int cdns_uart_probe(struct platform_device *pdev)
1479{
1480 int rc, id, irq;
1481 struct uart_port *port;
1482 struct resource *res;
1483 struct cdns_uart *cdns_uart_data;
1484 const struct of_device_id *match;
1485
1486 cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
1487 GFP_KERNEL);
1488 if (!cdns_uart_data)
1489 return -ENOMEM;
1490
1491 match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
1492 if (match && match->data) {
1493 const struct cdns_platform_data *data = match->data;
1494
1495 cdns_uart_data->quirks = data->quirks;
1496 }
1497
1498 cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "pclk");
1499 if (IS_ERR(cdns_uart_data->pclk)) {
1500 cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "aper_clk");
1501 if (!IS_ERR(cdns_uart_data->pclk))
1502 dev_err(&pdev->dev, "clock name 'aper_clk' is deprecated.\n");
1503 }
1504 if (IS_ERR(cdns_uart_data->pclk)) {
1505 dev_err(&pdev->dev, "pclk clock not found.\n");
1506 return PTR_ERR(cdns_uart_data->pclk);
1507 }
1508
1509 cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "uart_clk");
1510 if (IS_ERR(cdns_uart_data->uartclk)) {
1511 cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "ref_clk");
1512 if (!IS_ERR(cdns_uart_data->uartclk))
1513 dev_err(&pdev->dev, "clock name 'ref_clk' is deprecated.\n");
1514 }
1515 if (IS_ERR(cdns_uart_data->uartclk)) {
1516 dev_err(&pdev->dev, "uart_clk clock not found.\n");
1517 return PTR_ERR(cdns_uart_data->uartclk);
1518 }
1519
1520 rc = clk_prepare_enable(cdns_uart_data->pclk);
1521 if (rc) {
1522 dev_err(&pdev->dev, "Unable to enable pclk clock.\n");
1523 return rc;
1524 }
1525 rc = clk_prepare_enable(cdns_uart_data->uartclk);
1526 if (rc) {
1527 dev_err(&pdev->dev, "Unable to enable device clock.\n");
1528 goto err_out_clk_dis_pclk;
1529 }
1530
1531 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1532 if (!res) {
1533 rc = -ENODEV;
1534 goto err_out_clk_disable;
1535 }
1536
1537 irq = platform_get_irq(pdev, 0);
1538 if (irq <= 0) {
1539 rc = -ENXIO;
1540 goto err_out_clk_disable;
1541 }
1542
1543#ifdef CONFIG_COMMON_CLK
1544 cdns_uart_data->clk_rate_change_nb.notifier_call =
1545 cdns_uart_clk_notifier_cb;
1546 if (clk_notifier_register(cdns_uart_data->uartclk,
1547 &cdns_uart_data->clk_rate_change_nb))
1548 dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
1549#endif
1550 /* Look for a serialN alias */
1551 id = of_alias_get_id(pdev->dev.of_node, "serial");
1552 if (id < 0)
1553 id = 0;
1554
1555 /* Initialize the port structure */
1556 port = cdns_uart_get_port(id);
1557
1558 if (!port) {
1559 dev_err(&pdev->dev, "Cannot get uart_port structure\n");
1560 rc = -ENODEV;
1561 goto err_out_notif_unreg;
1562 }
1563
1564 /*
1565 * Register the port.
1566 * This function also registers this device with the tty layer
1567 * and triggers invocation of the config_port() entry point.
1568 */
1569 port->mapbase = res->start;
1570 port->irq = irq;
1571 port->dev = &pdev->dev;
1572 port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
1573 port->private_data = cdns_uart_data;
1574 cdns_uart_data->port = port;
1575 platform_set_drvdata(pdev, port);
1576
1577 pm_runtime_use_autosuspend(&pdev->dev);
1578 pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
1579 pm_runtime_set_active(&pdev->dev);
1580 pm_runtime_enable(&pdev->dev);
1581
1582 rc = uart_add_one_port(&cdns_uart_uart_driver, port);
1583 if (rc) {
1584 dev_err(&pdev->dev,
1585 "uart_add_one_port() failed; err=%i\n", rc);
1586 goto err_out_pm_disable;
1587 }
1588
1589 return 0;
1590
1591err_out_pm_disable:
1592 pm_runtime_disable(&pdev->dev);
1593 pm_runtime_set_suspended(&pdev->dev);
1594 pm_runtime_dont_use_autosuspend(&pdev->dev);
1595err_out_notif_unreg:
1596#ifdef CONFIG_COMMON_CLK
1597 clk_notifier_unregister(cdns_uart_data->uartclk,
1598 &cdns_uart_data->clk_rate_change_nb);
1599#endif
1600err_out_clk_disable:
1601 clk_disable_unprepare(cdns_uart_data->uartclk);
1602err_out_clk_dis_pclk:
1603 clk_disable_unprepare(cdns_uart_data->pclk);
1604
1605 return rc;
1606}
1607
1608/**
1609 * cdns_uart_remove - called when the platform driver is unregistered
1610 * @pdev: Pointer to the platform device structure
1611 *
1612 * Return: 0 on success, negative errno otherwise
1613 */
1614static int cdns_uart_remove(struct platform_device *pdev)
1615{
1616 struct uart_port *port = platform_get_drvdata(pdev);
1617 struct cdns_uart *cdns_uart_data = port->private_data;
1618 int rc;
1619
1620 /* Remove the cdns_uart port from the serial core */
1621#ifdef CONFIG_COMMON_CLK
1622 clk_notifier_unregister(cdns_uart_data->uartclk,
1623 &cdns_uart_data->clk_rate_change_nb);
1624#endif
1625 rc = uart_remove_one_port(&cdns_uart_uart_driver, port);
1626 port->mapbase = 0;
1627 clk_disable_unprepare(cdns_uart_data->uartclk);
1628 clk_disable_unprepare(cdns_uart_data->pclk);
1629 pm_runtime_disable(&pdev->dev);
1630 pm_runtime_set_suspended(&pdev->dev);
1631 pm_runtime_dont_use_autosuspend(&pdev->dev);
1632 return rc;
1633}
1634
1635static struct platform_driver cdns_uart_platform_driver = {
1636 .probe = cdns_uart_probe,
1637 .remove = cdns_uart_remove,
1638 .driver = {
1639 .name = CDNS_UART_NAME,
1640 .of_match_table = cdns_uart_of_match,
1641 .pm = &cdns_uart_dev_pm_ops,
1642 },
1643};
1644
1645static int __init cdns_uart_init(void)
1646{
1647 int retval = 0;
1648
1649 /* Register the cdns_uart driver with the serial core */
1650 retval = uart_register_driver(&cdns_uart_uart_driver);
1651 if (retval)
1652 return retval;
1653
1654 /* Register the platform driver */
1655 retval = platform_driver_register(&cdns_uart_platform_driver);
1656 if (retval)
1657 uart_unregister_driver(&cdns_uart_uart_driver);
1658
1659 return retval;
1660}
1661
1662static void __exit cdns_uart_exit(void)
1663{
1664 /* Unregister the platform driver */
1665 platform_driver_unregister(&cdns_uart_platform_driver);
1666
1667 /* Unregister the cdns_uart driver */
1668 uart_unregister_driver(&cdns_uart_uart_driver);
1669}
1670
1671arch_initcall(cdns_uart_init);
1672module_exit(cdns_uart_exit);
1673
1674MODULE_DESCRIPTION("Driver for Cadence UART");
1675MODULE_AUTHOR("Xilinx Inc.");
1676MODULE_LICENSE("GPL");