Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
4 *
5 * Library for common functions for Intel SpeedStep v.1 and v.2 support
6 *
7 * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
8 */
9
10#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
11
12#include <linux/kernel.h>
13#include <linux/module.h>
14#include <linux/moduleparam.h>
15#include <linux/init.h>
16#include <linux/cpufreq.h>
17
18#include <asm/msr.h>
19#include <asm/tsc.h>
20#include "speedstep-lib.h"
21
22#define PFX "speedstep-lib: "
23
24#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
25static int relaxed_check;
26#else
27#define relaxed_check 0
28#endif
29
30/*********************************************************************
31 * GET PROCESSOR CORE SPEED IN KHZ *
32 *********************************************************************/
33
34static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
35{
36 /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
37 static const struct {
38 unsigned int ratio; /* Frequency Multiplier (x10) */
39 u8 bitmap; /* power on configuration bits
40 [27, 25:22] (in MSR 0x2a) */
41 } msr_decode_mult[] = {
42 { 30, 0x01 },
43 { 35, 0x05 },
44 { 40, 0x02 },
45 { 45, 0x06 },
46 { 50, 0x00 },
47 { 55, 0x04 },
48 { 60, 0x0b },
49 { 65, 0x0f },
50 { 70, 0x09 },
51 { 75, 0x0d },
52 { 80, 0x0a },
53 { 85, 0x26 },
54 { 90, 0x20 },
55 { 100, 0x2b },
56 { 0, 0xff } /* error or unknown value */
57 };
58
59 /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
60 static const struct {
61 unsigned int value; /* Front Side Bus speed in MHz */
62 u8 bitmap; /* power on configuration bits [18: 19]
63 (in MSR 0x2a) */
64 } msr_decode_fsb[] = {
65 { 66, 0x0 },
66 { 100, 0x2 },
67 { 133, 0x1 },
68 { 0, 0xff}
69 };
70
71 u32 msr_lo, msr_tmp;
72 int i = 0, j = 0;
73
74 /* read MSR 0x2a - we only need the low 32 bits */
75 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
76 pr_debug("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
77 msr_tmp = msr_lo;
78
79 /* decode the FSB */
80 msr_tmp &= 0x00c0000;
81 msr_tmp >>= 18;
82 while (msr_tmp != msr_decode_fsb[i].bitmap) {
83 if (msr_decode_fsb[i].bitmap == 0xff)
84 return 0;
85 i++;
86 }
87
88 /* decode the multiplier */
89 if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) {
90 pr_debug("workaround for early PIIIs\n");
91 msr_lo &= 0x03c00000;
92 } else
93 msr_lo &= 0x0bc00000;
94 msr_lo >>= 22;
95 while (msr_lo != msr_decode_mult[j].bitmap) {
96 if (msr_decode_mult[j].bitmap == 0xff)
97 return 0;
98 j++;
99 }
100
101 pr_debug("speed is %u\n",
102 (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
103
104 return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100;
105}
106
107
108static unsigned int pentiumM_get_frequency(void)
109{
110 u32 msr_lo, msr_tmp;
111
112 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
113 pr_debug("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
114
115 /* see table B-2 of 24547212.pdf */
116 if (msr_lo & 0x00040000) {
117 printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n",
118 msr_lo, msr_tmp);
119 return 0;
120 }
121
122 msr_tmp = (msr_lo >> 22) & 0x1f;
123 pr_debug("bits 22-26 are 0x%x, speed is %u\n",
124 msr_tmp, (msr_tmp * 100 * 1000));
125
126 return msr_tmp * 100 * 1000;
127}
128
129static unsigned int pentium_core_get_frequency(void)
130{
131 u32 fsb = 0;
132 u32 msr_lo, msr_tmp;
133 int ret;
134
135 rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
136 /* see table B-2 of 25366920.pdf */
137 switch (msr_lo & 0x07) {
138 case 5:
139 fsb = 100000;
140 break;
141 case 1:
142 fsb = 133333;
143 break;
144 case 3:
145 fsb = 166667;
146 break;
147 case 2:
148 fsb = 200000;
149 break;
150 case 0:
151 fsb = 266667;
152 break;
153 case 4:
154 fsb = 333333;
155 break;
156 default:
157 pr_err("PCORE - MSR_FSB_FREQ undefined value\n");
158 }
159
160 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
161 pr_debug("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
162 msr_lo, msr_tmp);
163
164 msr_tmp = (msr_lo >> 22) & 0x1f;
165 pr_debug("bits 22-26 are 0x%x, speed is %u\n",
166 msr_tmp, (msr_tmp * fsb));
167
168 ret = (msr_tmp * fsb);
169 return ret;
170}
171
172
173static unsigned int pentium4_get_frequency(void)
174{
175 struct cpuinfo_x86 *c = &boot_cpu_data;
176 u32 msr_lo, msr_hi, mult;
177 unsigned int fsb = 0;
178 unsigned int ret;
179 u8 fsb_code;
180
181 /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency
182 * to System Bus Frequency Ratio Field in the Processor Frequency
183 * Configuration Register of the MSR. Therefore the current
184 * frequency cannot be calculated and has to be measured.
185 */
186 if (c->x86_model < 2)
187 return cpu_khz;
188
189 rdmsr(0x2c, msr_lo, msr_hi);
190
191 pr_debug("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
192
193 /* decode the FSB: see IA-32 Intel (C) Architecture Software
194 * Developer's Manual, Volume 3: System Prgramming Guide,
195 * revision #12 in Table B-1: MSRs in the Pentium 4 and
196 * Intel Xeon Processors, on page B-4 and B-5.
197 */
198 fsb_code = (msr_lo >> 16) & 0x7;
199 switch (fsb_code) {
200 case 0:
201 fsb = 100 * 1000;
202 break;
203 case 1:
204 fsb = 13333 * 10;
205 break;
206 case 2:
207 fsb = 200 * 1000;
208 break;
209 }
210
211 if (!fsb)
212 printk(KERN_DEBUG PFX "couldn't detect FSB speed. "
213 "Please send an e-mail to <linux@brodo.de>\n");
214
215 /* Multiplier. */
216 mult = msr_lo >> 24;
217
218 pr_debug("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
219 fsb, mult, (fsb * mult));
220
221 ret = (fsb * mult);
222 return ret;
223}
224
225
226/* Warning: may get called from smp_call_function_single. */
227unsigned int speedstep_get_frequency(enum speedstep_processor processor)
228{
229 switch (processor) {
230 case SPEEDSTEP_CPU_PCORE:
231 return pentium_core_get_frequency();
232 case SPEEDSTEP_CPU_PM:
233 return pentiumM_get_frequency();
234 case SPEEDSTEP_CPU_P4D:
235 case SPEEDSTEP_CPU_P4M:
236 return pentium4_get_frequency();
237 case SPEEDSTEP_CPU_PIII_T:
238 case SPEEDSTEP_CPU_PIII_C:
239 case SPEEDSTEP_CPU_PIII_C_EARLY:
240 return pentium3_get_frequency(processor);
241 default:
242 return 0;
243 };
244 return 0;
245}
246EXPORT_SYMBOL_GPL(speedstep_get_frequency);
247
248
249/*********************************************************************
250 * DETECT SPEEDSTEP-CAPABLE PROCESSOR *
251 *********************************************************************/
252
253/* Keep in sync with the x86_cpu_id tables in the different modules */
254enum speedstep_processor speedstep_detect_processor(void)
255{
256 struct cpuinfo_x86 *c = &cpu_data(0);
257 u32 ebx, msr_lo, msr_hi;
258
259 pr_debug("x86: %x, model: %x\n", c->x86, c->x86_model);
260
261 if ((c->x86_vendor != X86_VENDOR_INTEL) ||
262 ((c->x86 != 6) && (c->x86 != 0xF)))
263 return 0;
264
265 if (c->x86 == 0xF) {
266 /* Intel Mobile Pentium 4-M
267 * or Intel Mobile Pentium 4 with 533 MHz FSB */
268 if (c->x86_model != 2)
269 return 0;
270
271 ebx = cpuid_ebx(0x00000001);
272 ebx &= 0x000000FF;
273
274 pr_debug("ebx value is %x, x86_stepping is %x\n", ebx, c->x86_stepping);
275
276 switch (c->x86_stepping) {
277 case 4:
278 /*
279 * B-stepping [M-P4-M]
280 * sample has ebx = 0x0f, production has 0x0e.
281 */
282 if ((ebx == 0x0e) || (ebx == 0x0f))
283 return SPEEDSTEP_CPU_P4M;
284 break;
285 case 7:
286 /*
287 * C-stepping [M-P4-M]
288 * needs to have ebx=0x0e, else it's a celeron:
289 * cf. 25130917.pdf / page 7, footnote 5 even
290 * though 25072120.pdf / page 7 doesn't say
291 * samples are only of B-stepping...
292 */
293 if (ebx == 0x0e)
294 return SPEEDSTEP_CPU_P4M;
295 break;
296 case 9:
297 /*
298 * D-stepping [M-P4-M or M-P4/533]
299 *
300 * this is totally strange: CPUID 0x0F29 is
301 * used by M-P4-M, M-P4/533 and(!) Celeron CPUs.
302 * The latter need to be sorted out as they don't
303 * support speedstep.
304 * Celerons with CPUID 0x0F29 may have either
305 * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything
306 * specific.
307 * M-P4-Ms may have either ebx=0xe or 0xf [see above]
308 * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
309 * also, M-P4M HTs have ebx=0x8, too
310 * For now, they are distinguished by the model_id
311 * string
312 */
313 if ((ebx == 0x0e) ||
314 (strstr(c->x86_model_id,
315 "Mobile Intel(R) Pentium(R) 4") != NULL))
316 return SPEEDSTEP_CPU_P4M;
317 break;
318 default:
319 break;
320 }
321 return 0;
322 }
323
324 switch (c->x86_model) {
325 case 0x0B: /* Intel PIII [Tualatin] */
326 /* cpuid_ebx(1) is 0x04 for desktop PIII,
327 * 0x06 for mobile PIII-M */
328 ebx = cpuid_ebx(0x00000001);
329 pr_debug("ebx is %x\n", ebx);
330
331 ebx &= 0x000000FF;
332
333 if (ebx != 0x06)
334 return 0;
335
336 /* So far all PIII-M processors support SpeedStep. See
337 * Intel's 24540640.pdf of June 2003
338 */
339 return SPEEDSTEP_CPU_PIII_T;
340
341 case 0x08: /* Intel PIII [Coppermine] */
342
343 /* all mobile PIII Coppermines have FSB 100 MHz
344 * ==> sort out a few desktop PIIIs. */
345 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
346 pr_debug("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
347 msr_lo, msr_hi);
348 msr_lo &= 0x00c0000;
349 if (msr_lo != 0x0080000)
350 return 0;
351
352 /*
353 * If the processor is a mobile version,
354 * platform ID has bit 50 set
355 * it has SpeedStep technology if either
356 * bit 56 or 57 is set
357 */
358 rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
359 pr_debug("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
360 msr_lo, msr_hi);
361 if ((msr_hi & (1<<18)) &&
362 (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
363 if (c->x86_stepping == 0x01) {
364 pr_debug("early PIII version\n");
365 return SPEEDSTEP_CPU_PIII_C_EARLY;
366 } else
367 return SPEEDSTEP_CPU_PIII_C;
368 }
369 fallthrough;
370 default:
371 return 0;
372 }
373}
374EXPORT_SYMBOL_GPL(speedstep_detect_processor);
375
376
377/*********************************************************************
378 * DETECT SPEEDSTEP SPEEDS *
379 *********************************************************************/
380
381unsigned int speedstep_get_freqs(enum speedstep_processor processor,
382 unsigned int *low_speed,
383 unsigned int *high_speed,
384 unsigned int *transition_latency,
385 void (*set_state) (unsigned int state))
386{
387 unsigned int prev_speed;
388 unsigned int ret = 0;
389 unsigned long flags;
390 ktime_t tv1, tv2;
391
392 if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
393 return -EINVAL;
394
395 pr_debug("trying to determine both speeds\n");
396
397 /* get current speed */
398 prev_speed = speedstep_get_frequency(processor);
399 if (!prev_speed)
400 return -EIO;
401
402 pr_debug("previous speed is %u\n", prev_speed);
403
404 preempt_disable();
405 local_irq_save(flags);
406
407 /* switch to low state */
408 set_state(SPEEDSTEP_LOW);
409 *low_speed = speedstep_get_frequency(processor);
410 if (!*low_speed) {
411 ret = -EIO;
412 goto out;
413 }
414
415 pr_debug("low speed is %u\n", *low_speed);
416
417 /* start latency measurement */
418 if (transition_latency)
419 tv1 = ktime_get();
420
421 /* switch to high state */
422 set_state(SPEEDSTEP_HIGH);
423
424 /* end latency measurement */
425 if (transition_latency)
426 tv2 = ktime_get();
427
428 *high_speed = speedstep_get_frequency(processor);
429 if (!*high_speed) {
430 ret = -EIO;
431 goto out;
432 }
433
434 pr_debug("high speed is %u\n", *high_speed);
435
436 if (*low_speed == *high_speed) {
437 ret = -ENODEV;
438 goto out;
439 }
440
441 /* switch to previous state, if necessary */
442 if (*high_speed != prev_speed)
443 set_state(SPEEDSTEP_LOW);
444
445 if (transition_latency) {
446 *transition_latency = ktime_to_us(ktime_sub(tv2, tv1));
447 pr_debug("transition latency is %u uSec\n", *transition_latency);
448
449 /* convert uSec to nSec and add 20% for safety reasons */
450 *transition_latency *= 1200;
451
452 /* check if the latency measurement is too high or too low
453 * and set it to a safe value (500uSec) in that case
454 */
455 if (*transition_latency > 10000000 ||
456 *transition_latency < 50000) {
457 pr_warn("frequency transition measured seems out of range (%u nSec), falling back to a safe one of %u nSec\n",
458 *transition_latency, 500000);
459 *transition_latency = 500000;
460 }
461 }
462
463out:
464 local_irq_restore(flags);
465 preempt_enable();
466
467 return ret;
468}
469EXPORT_SYMBOL_GPL(speedstep_get_freqs);
470
471#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
472module_param(relaxed_check, int, 0444);
473MODULE_PARM_DESC(relaxed_check,
474 "Don't do all checks for speedstep capability.");
475#endif
476
477MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
478MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
479MODULE_LICENSE("GPL");
1/*
2 * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
3 *
4 * Licensed under the terms of the GNU GPL License version 2.
5 *
6 * Library for common functions for Intel SpeedStep v.1 and v.2 support
7 *
8 * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
9 */
10
11#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
12
13#include <linux/kernel.h>
14#include <linux/module.h>
15#include <linux/moduleparam.h>
16#include <linux/init.h>
17#include <linux/cpufreq.h>
18
19#include <asm/msr.h>
20#include <asm/tsc.h>
21#include "speedstep-lib.h"
22
23#define PFX "speedstep-lib: "
24
25#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
26static int relaxed_check;
27#else
28#define relaxed_check 0
29#endif
30
31/*********************************************************************
32 * GET PROCESSOR CORE SPEED IN KHZ *
33 *********************************************************************/
34
35static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
36{
37 /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
38 static const struct {
39 unsigned int ratio; /* Frequency Multiplier (x10) */
40 u8 bitmap; /* power on configuration bits
41 [27, 25:22] (in MSR 0x2a) */
42 } msr_decode_mult[] = {
43 { 30, 0x01 },
44 { 35, 0x05 },
45 { 40, 0x02 },
46 { 45, 0x06 },
47 { 50, 0x00 },
48 { 55, 0x04 },
49 { 60, 0x0b },
50 { 65, 0x0f },
51 { 70, 0x09 },
52 { 75, 0x0d },
53 { 80, 0x0a },
54 { 85, 0x26 },
55 { 90, 0x20 },
56 { 100, 0x2b },
57 { 0, 0xff } /* error or unknown value */
58 };
59
60 /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
61 static const struct {
62 unsigned int value; /* Front Side Bus speed in MHz */
63 u8 bitmap; /* power on configuration bits [18: 19]
64 (in MSR 0x2a) */
65 } msr_decode_fsb[] = {
66 { 66, 0x0 },
67 { 100, 0x2 },
68 { 133, 0x1 },
69 { 0, 0xff}
70 };
71
72 u32 msr_lo, msr_tmp;
73 int i = 0, j = 0;
74
75 /* read MSR 0x2a - we only need the low 32 bits */
76 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
77 pr_debug("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
78 msr_tmp = msr_lo;
79
80 /* decode the FSB */
81 msr_tmp &= 0x00c0000;
82 msr_tmp >>= 18;
83 while (msr_tmp != msr_decode_fsb[i].bitmap) {
84 if (msr_decode_fsb[i].bitmap == 0xff)
85 return 0;
86 i++;
87 }
88
89 /* decode the multiplier */
90 if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) {
91 pr_debug("workaround for early PIIIs\n");
92 msr_lo &= 0x03c00000;
93 } else
94 msr_lo &= 0x0bc00000;
95 msr_lo >>= 22;
96 while (msr_lo != msr_decode_mult[j].bitmap) {
97 if (msr_decode_mult[j].bitmap == 0xff)
98 return 0;
99 j++;
100 }
101
102 pr_debug("speed is %u\n",
103 (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
104
105 return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100;
106}
107
108
109static unsigned int pentiumM_get_frequency(void)
110{
111 u32 msr_lo, msr_tmp;
112
113 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
114 pr_debug("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
115
116 /* see table B-2 of 24547212.pdf */
117 if (msr_lo & 0x00040000) {
118 printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n",
119 msr_lo, msr_tmp);
120 return 0;
121 }
122
123 msr_tmp = (msr_lo >> 22) & 0x1f;
124 pr_debug("bits 22-26 are 0x%x, speed is %u\n",
125 msr_tmp, (msr_tmp * 100 * 1000));
126
127 return msr_tmp * 100 * 1000;
128}
129
130static unsigned int pentium_core_get_frequency(void)
131{
132 u32 fsb = 0;
133 u32 msr_lo, msr_tmp;
134 int ret;
135
136 rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
137 /* see table B-2 of 25366920.pdf */
138 switch (msr_lo & 0x07) {
139 case 5:
140 fsb = 100000;
141 break;
142 case 1:
143 fsb = 133333;
144 break;
145 case 3:
146 fsb = 166667;
147 break;
148 case 2:
149 fsb = 200000;
150 break;
151 case 0:
152 fsb = 266667;
153 break;
154 case 4:
155 fsb = 333333;
156 break;
157 default:
158 pr_err("PCORE - MSR_FSB_FREQ undefined value\n");
159 }
160
161 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
162 pr_debug("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
163 msr_lo, msr_tmp);
164
165 msr_tmp = (msr_lo >> 22) & 0x1f;
166 pr_debug("bits 22-26 are 0x%x, speed is %u\n",
167 msr_tmp, (msr_tmp * fsb));
168
169 ret = (msr_tmp * fsb);
170 return ret;
171}
172
173
174static unsigned int pentium4_get_frequency(void)
175{
176 struct cpuinfo_x86 *c = &boot_cpu_data;
177 u32 msr_lo, msr_hi, mult;
178 unsigned int fsb = 0;
179 unsigned int ret;
180 u8 fsb_code;
181
182 /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency
183 * to System Bus Frequency Ratio Field in the Processor Frequency
184 * Configuration Register of the MSR. Therefore the current
185 * frequency cannot be calculated and has to be measured.
186 */
187 if (c->x86_model < 2)
188 return cpu_khz;
189
190 rdmsr(0x2c, msr_lo, msr_hi);
191
192 pr_debug("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
193
194 /* decode the FSB: see IA-32 Intel (C) Architecture Software
195 * Developer's Manual, Volume 3: System Prgramming Guide,
196 * revision #12 in Table B-1: MSRs in the Pentium 4 and
197 * Intel Xeon Processors, on page B-4 and B-5.
198 */
199 fsb_code = (msr_lo >> 16) & 0x7;
200 switch (fsb_code) {
201 case 0:
202 fsb = 100 * 1000;
203 break;
204 case 1:
205 fsb = 13333 * 10;
206 break;
207 case 2:
208 fsb = 200 * 1000;
209 break;
210 }
211
212 if (!fsb)
213 printk(KERN_DEBUG PFX "couldn't detect FSB speed. "
214 "Please send an e-mail to <linux@brodo.de>\n");
215
216 /* Multiplier. */
217 mult = msr_lo >> 24;
218
219 pr_debug("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
220 fsb, mult, (fsb * mult));
221
222 ret = (fsb * mult);
223 return ret;
224}
225
226
227/* Warning: may get called from smp_call_function_single. */
228unsigned int speedstep_get_frequency(enum speedstep_processor processor)
229{
230 switch (processor) {
231 case SPEEDSTEP_CPU_PCORE:
232 return pentium_core_get_frequency();
233 case SPEEDSTEP_CPU_PM:
234 return pentiumM_get_frequency();
235 case SPEEDSTEP_CPU_P4D:
236 case SPEEDSTEP_CPU_P4M:
237 return pentium4_get_frequency();
238 case SPEEDSTEP_CPU_PIII_T:
239 case SPEEDSTEP_CPU_PIII_C:
240 case SPEEDSTEP_CPU_PIII_C_EARLY:
241 return pentium3_get_frequency(processor);
242 default:
243 return 0;
244 };
245 return 0;
246}
247EXPORT_SYMBOL_GPL(speedstep_get_frequency);
248
249
250/*********************************************************************
251 * DETECT SPEEDSTEP-CAPABLE PROCESSOR *
252 *********************************************************************/
253
254/* Keep in sync with the x86_cpu_id tables in the different modules */
255unsigned int speedstep_detect_processor(void)
256{
257 struct cpuinfo_x86 *c = &cpu_data(0);
258 u32 ebx, msr_lo, msr_hi;
259
260 pr_debug("x86: %x, model: %x\n", c->x86, c->x86_model);
261
262 if ((c->x86_vendor != X86_VENDOR_INTEL) ||
263 ((c->x86 != 6) && (c->x86 != 0xF)))
264 return 0;
265
266 if (c->x86 == 0xF) {
267 /* Intel Mobile Pentium 4-M
268 * or Intel Mobile Pentium 4 with 533 MHz FSB */
269 if (c->x86_model != 2)
270 return 0;
271
272 ebx = cpuid_ebx(0x00000001);
273 ebx &= 0x000000FF;
274
275 pr_debug("ebx value is %x, x86_stepping is %x\n", ebx, c->x86_stepping);
276
277 switch (c->x86_stepping) {
278 case 4:
279 /*
280 * B-stepping [M-P4-M]
281 * sample has ebx = 0x0f, production has 0x0e.
282 */
283 if ((ebx == 0x0e) || (ebx == 0x0f))
284 return SPEEDSTEP_CPU_P4M;
285 break;
286 case 7:
287 /*
288 * C-stepping [M-P4-M]
289 * needs to have ebx=0x0e, else it's a celeron:
290 * cf. 25130917.pdf / page 7, footnote 5 even
291 * though 25072120.pdf / page 7 doesn't say
292 * samples are only of B-stepping...
293 */
294 if (ebx == 0x0e)
295 return SPEEDSTEP_CPU_P4M;
296 break;
297 case 9:
298 /*
299 * D-stepping [M-P4-M or M-P4/533]
300 *
301 * this is totally strange: CPUID 0x0F29 is
302 * used by M-P4-M, M-P4/533 and(!) Celeron CPUs.
303 * The latter need to be sorted out as they don't
304 * support speedstep.
305 * Celerons with CPUID 0x0F29 may have either
306 * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything
307 * specific.
308 * M-P4-Ms may have either ebx=0xe or 0xf [see above]
309 * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
310 * also, M-P4M HTs have ebx=0x8, too
311 * For now, they are distinguished by the model_id
312 * string
313 */
314 if ((ebx == 0x0e) ||
315 (strstr(c->x86_model_id,
316 "Mobile Intel(R) Pentium(R) 4") != NULL))
317 return SPEEDSTEP_CPU_P4M;
318 break;
319 default:
320 break;
321 }
322 return 0;
323 }
324
325 switch (c->x86_model) {
326 case 0x0B: /* Intel PIII [Tualatin] */
327 /* cpuid_ebx(1) is 0x04 for desktop PIII,
328 * 0x06 for mobile PIII-M */
329 ebx = cpuid_ebx(0x00000001);
330 pr_debug("ebx is %x\n", ebx);
331
332 ebx &= 0x000000FF;
333
334 if (ebx != 0x06)
335 return 0;
336
337 /* So far all PIII-M processors support SpeedStep. See
338 * Intel's 24540640.pdf of June 2003
339 */
340 return SPEEDSTEP_CPU_PIII_T;
341
342 case 0x08: /* Intel PIII [Coppermine] */
343
344 /* all mobile PIII Coppermines have FSB 100 MHz
345 * ==> sort out a few desktop PIIIs. */
346 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
347 pr_debug("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
348 msr_lo, msr_hi);
349 msr_lo &= 0x00c0000;
350 if (msr_lo != 0x0080000)
351 return 0;
352
353 /*
354 * If the processor is a mobile version,
355 * platform ID has bit 50 set
356 * it has SpeedStep technology if either
357 * bit 56 or 57 is set
358 */
359 rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
360 pr_debug("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
361 msr_lo, msr_hi);
362 if ((msr_hi & (1<<18)) &&
363 (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
364 if (c->x86_stepping == 0x01) {
365 pr_debug("early PIII version\n");
366 return SPEEDSTEP_CPU_PIII_C_EARLY;
367 } else
368 return SPEEDSTEP_CPU_PIII_C;
369 }
370 /* fall through */
371 default:
372 return 0;
373 }
374}
375EXPORT_SYMBOL_GPL(speedstep_detect_processor);
376
377
378/*********************************************************************
379 * DETECT SPEEDSTEP SPEEDS *
380 *********************************************************************/
381
382unsigned int speedstep_get_freqs(enum speedstep_processor processor,
383 unsigned int *low_speed,
384 unsigned int *high_speed,
385 unsigned int *transition_latency,
386 void (*set_state) (unsigned int state))
387{
388 unsigned int prev_speed;
389 unsigned int ret = 0;
390 unsigned long flags;
391 ktime_t tv1, tv2;
392
393 if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
394 return -EINVAL;
395
396 pr_debug("trying to determine both speeds\n");
397
398 /* get current speed */
399 prev_speed = speedstep_get_frequency(processor);
400 if (!prev_speed)
401 return -EIO;
402
403 pr_debug("previous speed is %u\n", prev_speed);
404
405 preempt_disable();
406 local_irq_save(flags);
407
408 /* switch to low state */
409 set_state(SPEEDSTEP_LOW);
410 *low_speed = speedstep_get_frequency(processor);
411 if (!*low_speed) {
412 ret = -EIO;
413 goto out;
414 }
415
416 pr_debug("low speed is %u\n", *low_speed);
417
418 /* start latency measurement */
419 if (transition_latency)
420 tv1 = ktime_get();
421
422 /* switch to high state */
423 set_state(SPEEDSTEP_HIGH);
424
425 /* end latency measurement */
426 if (transition_latency)
427 tv2 = ktime_get();
428
429 *high_speed = speedstep_get_frequency(processor);
430 if (!*high_speed) {
431 ret = -EIO;
432 goto out;
433 }
434
435 pr_debug("high speed is %u\n", *high_speed);
436
437 if (*low_speed == *high_speed) {
438 ret = -ENODEV;
439 goto out;
440 }
441
442 /* switch to previous state, if necessary */
443 if (*high_speed != prev_speed)
444 set_state(SPEEDSTEP_LOW);
445
446 if (transition_latency) {
447 *transition_latency = ktime_to_us(ktime_sub(tv2, tv1));
448 pr_debug("transition latency is %u uSec\n", *transition_latency);
449
450 /* convert uSec to nSec and add 20% for safety reasons */
451 *transition_latency *= 1200;
452
453 /* check if the latency measurement is too high or too low
454 * and set it to a safe value (500uSec) in that case
455 */
456 if (*transition_latency > 10000000 ||
457 *transition_latency < 50000) {
458 pr_warn("frequency transition measured seems out of range (%u nSec), falling back to a safe one of %u nSec\n",
459 *transition_latency, 500000);
460 *transition_latency = 500000;
461 }
462 }
463
464out:
465 local_irq_restore(flags);
466 preempt_enable();
467
468 return ret;
469}
470EXPORT_SYMBOL_GPL(speedstep_get_freqs);
471
472#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
473module_param(relaxed_check, int, 0444);
474MODULE_PARM_DESC(relaxed_check,
475 "Don't do all checks for speedstep capability.");
476#endif
477
478MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
479MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
480MODULE_LICENSE("GPL");