Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (C) 2016 Socionext Inc.
4 * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
5 */
6
7#include <linux/mfd/syscon.h>
8#include <linux/module.h>
9#include <linux/of.h>
10#include <linux/of_device.h>
11#include <linux/platform_device.h>
12#include <linux/regmap.h>
13#include <linux/reset-controller.h>
14
15struct uniphier_reset_data {
16 unsigned int id;
17 unsigned int reg;
18 unsigned int bit;
19 unsigned int flags;
20#define UNIPHIER_RESET_ACTIVE_LOW BIT(0)
21};
22
23#define UNIPHIER_RESET_ID_END (unsigned int)(-1)
24
25#define UNIPHIER_RESET_END \
26 { .id = UNIPHIER_RESET_ID_END }
27
28#define UNIPHIER_RESET(_id, _reg, _bit) \
29 { \
30 .id = (_id), \
31 .reg = (_reg), \
32 .bit = (_bit), \
33 }
34
35#define UNIPHIER_RESETX(_id, _reg, _bit) \
36 { \
37 .id = (_id), \
38 .reg = (_reg), \
39 .bit = (_bit), \
40 .flags = UNIPHIER_RESET_ACTIVE_LOW, \
41 }
42
43/* System reset data */
44static const struct uniphier_reset_data uniphier_ld4_sys_reset_data[] = {
45 UNIPHIER_RESETX(2, 0x2000, 2), /* NAND */
46 UNIPHIER_RESETX(8, 0x2000, 10), /* STDMAC (Ether, HSC, MIO) */
47 UNIPHIER_RESET_END,
48};
49
50static const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
51 UNIPHIER_RESETX(2, 0x2000, 2), /* NAND */
52 UNIPHIER_RESETX(6, 0x2000, 12), /* Ether */
53 UNIPHIER_RESETX(8, 0x2000, 10), /* STDMAC (HSC, MIO, RLE) */
54 UNIPHIER_RESETX(12, 0x2000, 6), /* GIO (Ether, SATA, USB3) */
55 UNIPHIER_RESETX(14, 0x2000, 17), /* USB30 */
56 UNIPHIER_RESETX(15, 0x2004, 17), /* USB31 */
57 UNIPHIER_RESETX(28, 0x2000, 18), /* SATA0 */
58 UNIPHIER_RESETX(29, 0x2004, 18), /* SATA1 */
59 UNIPHIER_RESETX(30, 0x2000, 19), /* SATA-PHY */
60 UNIPHIER_RESETX(40, 0x2000, 13), /* AIO */
61 UNIPHIER_RESET_END,
62};
63
64static const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
65 UNIPHIER_RESETX(2, 0x2000, 2), /* NAND */
66 UNIPHIER_RESETX(8, 0x2000, 10), /* STDMAC (HSC) */
67 UNIPHIER_RESETX(12, 0x2000, 6), /* GIO (PCIe, USB3) */
68 UNIPHIER_RESETX(14, 0x2000, 17), /* USB30 */
69 UNIPHIER_RESETX(15, 0x2004, 17), /* USB31 */
70 UNIPHIER_RESETX(24, 0x2008, 2), /* PCIe */
71 UNIPHIER_RESETX(40, 0x2000, 13), /* AIO */
72 UNIPHIER_RESET_END,
73};
74
75static const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
76 UNIPHIER_RESETX(2, 0x2000, 2), /* NAND */
77 UNIPHIER_RESETX(6, 0x2000, 12), /* Ether */
78 UNIPHIER_RESETX(8, 0x2000, 10), /* STDMAC (HSC, RLE) */
79 UNIPHIER_RESETX(14, 0x2000, 17), /* USB30 */
80 UNIPHIER_RESETX(15, 0x2004, 17), /* USB31 */
81 UNIPHIER_RESETX(16, 0x2014, 4), /* USB30-PHY0 */
82 UNIPHIER_RESETX(17, 0x2014, 0), /* USB30-PHY1 */
83 UNIPHIER_RESETX(18, 0x2014, 2), /* USB30-PHY2 */
84 UNIPHIER_RESETX(20, 0x2014, 5), /* USB31-PHY0 */
85 UNIPHIER_RESETX(21, 0x2014, 1), /* USB31-PHY1 */
86 UNIPHIER_RESETX(28, 0x2014, 12), /* SATA */
87 UNIPHIER_RESET(30, 0x2014, 8), /* SATA-PHY (active high) */
88 UNIPHIER_RESETX(40, 0x2000, 13), /* AIO */
89 UNIPHIER_RESET_END,
90};
91
92static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
93 UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
94 UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
95 UNIPHIER_RESETX(6, 0x200c, 6), /* Ether */
96 UNIPHIER_RESETX(8, 0x200c, 8), /* STDMAC (HSC, MIO) */
97 UNIPHIER_RESETX(9, 0x200c, 9), /* HSC */
98 UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
99 UNIPHIER_RESETX(41, 0x2008, 1), /* EVEA */
100 UNIPHIER_RESETX(42, 0x2010, 2), /* EXIV */
101 UNIPHIER_RESET_END,
102};
103
104static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
105 UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
106 UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
107 UNIPHIER_RESETX(6, 0x200c, 6), /* Ether */
108 UNIPHIER_RESETX(8, 0x200c, 8), /* STDMAC (HSC) */
109 UNIPHIER_RESETX(9, 0x200c, 9), /* HSC */
110 UNIPHIER_RESETX(14, 0x200c, 5), /* USB30 */
111 UNIPHIER_RESETX(16, 0x200c, 12), /* USB30-PHY0 */
112 UNIPHIER_RESETX(17, 0x200c, 13), /* USB30-PHY1 */
113 UNIPHIER_RESETX(18, 0x200c, 14), /* USB30-PHY2 */
114 UNIPHIER_RESETX(19, 0x200c, 15), /* USB30-PHY3 */
115 UNIPHIER_RESETX(24, 0x200c, 4), /* PCIe */
116 UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
117 UNIPHIER_RESETX(41, 0x2008, 1), /* EVEA */
118 UNIPHIER_RESETX(42, 0x2010, 2), /* EXIV */
119 UNIPHIER_RESET_END,
120};
121
122static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = {
123 UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
124 UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
125 UNIPHIER_RESETX(6, 0x200c, 9), /* Ether0 */
126 UNIPHIER_RESETX(7, 0x200c, 10), /* Ether1 */
127 UNIPHIER_RESETX(8, 0x200c, 12), /* STDMAC */
128 UNIPHIER_RESETX(12, 0x200c, 4), /* USB30 link */
129 UNIPHIER_RESETX(13, 0x200c, 5), /* USB31 link */
130 UNIPHIER_RESETX(16, 0x200c, 16), /* USB30-PHY0 */
131 UNIPHIER_RESETX(17, 0x200c, 18), /* USB30-PHY1 */
132 UNIPHIER_RESETX(18, 0x200c, 20), /* USB30-PHY2 */
133 UNIPHIER_RESETX(20, 0x200c, 17), /* USB31-PHY0 */
134 UNIPHIER_RESETX(21, 0x200c, 19), /* USB31-PHY1 */
135 UNIPHIER_RESETX(24, 0x200c, 3), /* PCIe */
136 UNIPHIER_RESETX(28, 0x200c, 7), /* SATA0 */
137 UNIPHIER_RESETX(29, 0x200c, 8), /* SATA1 */
138 UNIPHIER_RESETX(30, 0x200c, 21), /* SATA-PHY */
139 UNIPHIER_RESET_END,
140};
141
142/* Media I/O reset data */
143#define UNIPHIER_MIO_RESET_SD(id, ch) \
144 UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 0)
145
146#define UNIPHIER_MIO_RESET_SD_BRIDGE(id, ch) \
147 UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 26)
148
149#define UNIPHIER_MIO_RESET_EMMC_HW_RESET(id, ch) \
150 UNIPHIER_RESETX((id), 0x80 + 0x200 * (ch), 0)
151
152#define UNIPHIER_MIO_RESET_USB2(id, ch) \
153 UNIPHIER_RESETX((id), 0x114 + 0x200 * (ch), 0)
154
155#define UNIPHIER_MIO_RESET_USB2_BRIDGE(id, ch) \
156 UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 24)
157
158#define UNIPHIER_MIO_RESET_DMAC(id) \
159 UNIPHIER_RESETX((id), 0x110, 17)
160
161static const struct uniphier_reset_data uniphier_ld4_mio_reset_data[] = {
162 UNIPHIER_MIO_RESET_SD(0, 0),
163 UNIPHIER_MIO_RESET_SD(1, 1),
164 UNIPHIER_MIO_RESET_SD(2, 2),
165 UNIPHIER_MIO_RESET_SD_BRIDGE(3, 0),
166 UNIPHIER_MIO_RESET_SD_BRIDGE(4, 1),
167 UNIPHIER_MIO_RESET_SD_BRIDGE(5, 2),
168 UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1),
169 UNIPHIER_MIO_RESET_DMAC(7),
170 UNIPHIER_MIO_RESET_USB2(8, 0),
171 UNIPHIER_MIO_RESET_USB2(9, 1),
172 UNIPHIER_MIO_RESET_USB2(10, 2),
173 UNIPHIER_MIO_RESET_USB2_BRIDGE(12, 0),
174 UNIPHIER_MIO_RESET_USB2_BRIDGE(13, 1),
175 UNIPHIER_MIO_RESET_USB2_BRIDGE(14, 2),
176 UNIPHIER_RESET_END,
177};
178
179static const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
180 UNIPHIER_MIO_RESET_SD(0, 0),
181 UNIPHIER_MIO_RESET_SD(1, 1),
182 UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1),
183 UNIPHIER_RESET_END,
184};
185
186/* Peripheral reset data */
187#define UNIPHIER_PERI_RESET_UART(id, ch) \
188 UNIPHIER_RESETX((id), 0x114, 19 + (ch))
189
190#define UNIPHIER_PERI_RESET_I2C(id, ch) \
191 UNIPHIER_RESETX((id), 0x114, 5 + (ch))
192
193#define UNIPHIER_PERI_RESET_FI2C(id, ch) \
194 UNIPHIER_RESETX((id), 0x114, 24 + (ch))
195
196#define UNIPHIER_PERI_RESET_SCSSI(id, ch) \
197 UNIPHIER_RESETX((id), 0x110, 17 + (ch))
198
199#define UNIPHIER_PERI_RESET_MCSSI(id) \
200 UNIPHIER_RESETX((id), 0x114, 14)
201
202static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
203 UNIPHIER_PERI_RESET_UART(0, 0),
204 UNIPHIER_PERI_RESET_UART(1, 1),
205 UNIPHIER_PERI_RESET_UART(2, 2),
206 UNIPHIER_PERI_RESET_UART(3, 3),
207 UNIPHIER_PERI_RESET_I2C(4, 0),
208 UNIPHIER_PERI_RESET_I2C(5, 1),
209 UNIPHIER_PERI_RESET_I2C(6, 2),
210 UNIPHIER_PERI_RESET_I2C(7, 3),
211 UNIPHIER_PERI_RESET_I2C(8, 4),
212 UNIPHIER_PERI_RESET_SCSSI(11, 0),
213 UNIPHIER_RESET_END,
214};
215
216static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
217 UNIPHIER_PERI_RESET_UART(0, 0),
218 UNIPHIER_PERI_RESET_UART(1, 1),
219 UNIPHIER_PERI_RESET_UART(2, 2),
220 UNIPHIER_PERI_RESET_UART(3, 3),
221 UNIPHIER_PERI_RESET_FI2C(4, 0),
222 UNIPHIER_PERI_RESET_FI2C(5, 1),
223 UNIPHIER_PERI_RESET_FI2C(6, 2),
224 UNIPHIER_PERI_RESET_FI2C(7, 3),
225 UNIPHIER_PERI_RESET_FI2C(8, 4),
226 UNIPHIER_PERI_RESET_FI2C(9, 5),
227 UNIPHIER_PERI_RESET_FI2C(10, 6),
228 UNIPHIER_PERI_RESET_SCSSI(11, 0),
229 UNIPHIER_PERI_RESET_SCSSI(12, 1),
230 UNIPHIER_PERI_RESET_SCSSI(13, 2),
231 UNIPHIER_PERI_RESET_SCSSI(14, 3),
232 UNIPHIER_PERI_RESET_MCSSI(15),
233 UNIPHIER_RESET_END,
234};
235
236/* Analog signal amplifiers reset data */
237static const struct uniphier_reset_data uniphier_ld11_adamv_reset_data[] = {
238 UNIPHIER_RESETX(0, 0x10, 6), /* EVEA */
239 UNIPHIER_RESET_END,
240};
241
242/* core implementaton */
243struct uniphier_reset_priv {
244 struct reset_controller_dev rcdev;
245 struct device *dev;
246 struct regmap *regmap;
247 const struct uniphier_reset_data *data;
248};
249
250#define to_uniphier_reset_priv(_rcdev) \
251 container_of(_rcdev, struct uniphier_reset_priv, rcdev)
252
253static int uniphier_reset_update(struct reset_controller_dev *rcdev,
254 unsigned long id, int assert)
255{
256 struct uniphier_reset_priv *priv = to_uniphier_reset_priv(rcdev);
257 const struct uniphier_reset_data *p;
258
259 for (p = priv->data; p->id != UNIPHIER_RESET_ID_END; p++) {
260 unsigned int mask, val;
261
262 if (p->id != id)
263 continue;
264
265 mask = BIT(p->bit);
266
267 if (assert)
268 val = mask;
269 else
270 val = ~mask;
271
272 if (p->flags & UNIPHIER_RESET_ACTIVE_LOW)
273 val = ~val;
274
275 return regmap_write_bits(priv->regmap, p->reg, mask, val);
276 }
277
278 dev_err(priv->dev, "reset_id=%lu was not handled\n", id);
279 return -EINVAL;
280}
281
282static int uniphier_reset_assert(struct reset_controller_dev *rcdev,
283 unsigned long id)
284{
285 return uniphier_reset_update(rcdev, id, 1);
286}
287
288static int uniphier_reset_deassert(struct reset_controller_dev *rcdev,
289 unsigned long id)
290{
291 return uniphier_reset_update(rcdev, id, 0);
292}
293
294static int uniphier_reset_status(struct reset_controller_dev *rcdev,
295 unsigned long id)
296{
297 struct uniphier_reset_priv *priv = to_uniphier_reset_priv(rcdev);
298 const struct uniphier_reset_data *p;
299
300 for (p = priv->data; p->id != UNIPHIER_RESET_ID_END; p++) {
301 unsigned int val;
302 int ret, asserted;
303
304 if (p->id != id)
305 continue;
306
307 ret = regmap_read(priv->regmap, p->reg, &val);
308 if (ret)
309 return ret;
310
311 asserted = !!(val & BIT(p->bit));
312
313 if (p->flags & UNIPHIER_RESET_ACTIVE_LOW)
314 asserted = !asserted;
315
316 return asserted;
317 }
318
319 dev_err(priv->dev, "reset_id=%lu was not found\n", id);
320 return -EINVAL;
321}
322
323static const struct reset_control_ops uniphier_reset_ops = {
324 .assert = uniphier_reset_assert,
325 .deassert = uniphier_reset_deassert,
326 .status = uniphier_reset_status,
327};
328
329static int uniphier_reset_probe(struct platform_device *pdev)
330{
331 struct device *dev = &pdev->dev;
332 struct uniphier_reset_priv *priv;
333 const struct uniphier_reset_data *p, *data;
334 struct regmap *regmap;
335 struct device_node *parent;
336 unsigned int nr_resets = 0;
337
338 data = of_device_get_match_data(dev);
339 if (WARN_ON(!data))
340 return -EINVAL;
341
342 parent = of_get_parent(dev->of_node); /* parent should be syscon node */
343 regmap = syscon_node_to_regmap(parent);
344 of_node_put(parent);
345 if (IS_ERR(regmap)) {
346 dev_err(dev, "failed to get regmap (error %ld)\n",
347 PTR_ERR(regmap));
348 return PTR_ERR(regmap);
349 }
350
351 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
352 if (!priv)
353 return -ENOMEM;
354
355 for (p = data; p->id != UNIPHIER_RESET_ID_END; p++)
356 nr_resets = max(nr_resets, p->id + 1);
357
358 priv->rcdev.ops = &uniphier_reset_ops;
359 priv->rcdev.owner = dev->driver->owner;
360 priv->rcdev.of_node = dev->of_node;
361 priv->rcdev.nr_resets = nr_resets;
362 priv->dev = dev;
363 priv->regmap = regmap;
364 priv->data = data;
365
366 return devm_reset_controller_register(&pdev->dev, &priv->rcdev);
367}
368
369static const struct of_device_id uniphier_reset_match[] = {
370 /* System reset */
371 {
372 .compatible = "socionext,uniphier-ld4-reset",
373 .data = uniphier_ld4_sys_reset_data,
374 },
375 {
376 .compatible = "socionext,uniphier-pro4-reset",
377 .data = uniphier_pro4_sys_reset_data,
378 },
379 {
380 .compatible = "socionext,uniphier-sld8-reset",
381 .data = uniphier_ld4_sys_reset_data,
382 },
383 {
384 .compatible = "socionext,uniphier-pro5-reset",
385 .data = uniphier_pro5_sys_reset_data,
386 },
387 {
388 .compatible = "socionext,uniphier-pxs2-reset",
389 .data = uniphier_pxs2_sys_reset_data,
390 },
391 {
392 .compatible = "socionext,uniphier-ld11-reset",
393 .data = uniphier_ld11_sys_reset_data,
394 },
395 {
396 .compatible = "socionext,uniphier-ld20-reset",
397 .data = uniphier_ld20_sys_reset_data,
398 },
399 {
400 .compatible = "socionext,uniphier-pxs3-reset",
401 .data = uniphier_pxs3_sys_reset_data,
402 },
403 /* Media I/O reset, SD reset */
404 {
405 .compatible = "socionext,uniphier-ld4-mio-reset",
406 .data = uniphier_ld4_mio_reset_data,
407 },
408 {
409 .compatible = "socionext,uniphier-pro4-mio-reset",
410 .data = uniphier_ld4_mio_reset_data,
411 },
412 {
413 .compatible = "socionext,uniphier-sld8-mio-reset",
414 .data = uniphier_ld4_mio_reset_data,
415 },
416 {
417 .compatible = "socionext,uniphier-pro5-sd-reset",
418 .data = uniphier_pro5_sd_reset_data,
419 },
420 {
421 .compatible = "socionext,uniphier-pxs2-sd-reset",
422 .data = uniphier_pro5_sd_reset_data,
423 },
424 {
425 .compatible = "socionext,uniphier-ld11-mio-reset",
426 .data = uniphier_ld4_mio_reset_data,
427 },
428 {
429 .compatible = "socionext,uniphier-ld11-sd-reset",
430 .data = uniphier_pro5_sd_reset_data,
431 },
432 {
433 .compatible = "socionext,uniphier-ld20-sd-reset",
434 .data = uniphier_pro5_sd_reset_data,
435 },
436 {
437 .compatible = "socionext,uniphier-pxs3-sd-reset",
438 .data = uniphier_pro5_sd_reset_data,
439 },
440 /* Peripheral reset */
441 {
442 .compatible = "socionext,uniphier-ld4-peri-reset",
443 .data = uniphier_ld4_peri_reset_data,
444 },
445 {
446 .compatible = "socionext,uniphier-pro4-peri-reset",
447 .data = uniphier_pro4_peri_reset_data,
448 },
449 {
450 .compatible = "socionext,uniphier-sld8-peri-reset",
451 .data = uniphier_ld4_peri_reset_data,
452 },
453 {
454 .compatible = "socionext,uniphier-pro5-peri-reset",
455 .data = uniphier_pro4_peri_reset_data,
456 },
457 {
458 .compatible = "socionext,uniphier-pxs2-peri-reset",
459 .data = uniphier_pro4_peri_reset_data,
460 },
461 {
462 .compatible = "socionext,uniphier-ld11-peri-reset",
463 .data = uniphier_pro4_peri_reset_data,
464 },
465 {
466 .compatible = "socionext,uniphier-ld20-peri-reset",
467 .data = uniphier_pro4_peri_reset_data,
468 },
469 {
470 .compatible = "socionext,uniphier-pxs3-peri-reset",
471 .data = uniphier_pro4_peri_reset_data,
472 },
473 /* Analog signal amplifiers reset */
474 {
475 .compatible = "socionext,uniphier-ld11-adamv-reset",
476 .data = uniphier_ld11_adamv_reset_data,
477 },
478 {
479 .compatible = "socionext,uniphier-ld20-adamv-reset",
480 .data = uniphier_ld11_adamv_reset_data,
481 },
482 { /* sentinel */ }
483};
484MODULE_DEVICE_TABLE(of, uniphier_reset_match);
485
486static struct platform_driver uniphier_reset_driver = {
487 .probe = uniphier_reset_probe,
488 .driver = {
489 .name = "uniphier-reset",
490 .of_match_table = uniphier_reset_match,
491 },
492};
493module_platform_driver(uniphier_reset_driver);
494
495MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
496MODULE_DESCRIPTION("UniPhier Reset Controller Driver");
497MODULE_LICENSE("GPL");
1/*
2 * Copyright (C) 2016 Socionext Inc.
3 * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 */
15
16#include <linux/mfd/syscon.h>
17#include <linux/module.h>
18#include <linux/of.h>
19#include <linux/of_device.h>
20#include <linux/platform_device.h>
21#include <linux/regmap.h>
22#include <linux/reset-controller.h>
23
24struct uniphier_reset_data {
25 unsigned int id;
26 unsigned int reg;
27 unsigned int bit;
28 unsigned int flags;
29#define UNIPHIER_RESET_ACTIVE_LOW BIT(0)
30};
31
32#define UNIPHIER_RESET_ID_END (unsigned int)(-1)
33
34#define UNIPHIER_RESET_END \
35 { .id = UNIPHIER_RESET_ID_END }
36
37#define UNIPHIER_RESET(_id, _reg, _bit) \
38 { \
39 .id = (_id), \
40 .reg = (_reg), \
41 .bit = (_bit), \
42 }
43
44#define UNIPHIER_RESETX(_id, _reg, _bit) \
45 { \
46 .id = (_id), \
47 .reg = (_reg), \
48 .bit = (_bit), \
49 .flags = UNIPHIER_RESET_ACTIVE_LOW, \
50 }
51
52/* System reset data */
53static const struct uniphier_reset_data uniphier_ld4_sys_reset_data[] = {
54 UNIPHIER_RESETX(2, 0x2000, 2), /* NAND */
55 UNIPHIER_RESETX(8, 0x2000, 10), /* STDMAC (Ether, HSC, MIO) */
56 UNIPHIER_RESET_END,
57};
58
59static const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
60 UNIPHIER_RESETX(2, 0x2000, 2), /* NAND */
61 UNIPHIER_RESETX(6, 0x2000, 12), /* Ether */
62 UNIPHIER_RESETX(8, 0x2000, 10), /* STDMAC (HSC, MIO, RLE) */
63 UNIPHIER_RESETX(12, 0x2000, 6), /* GIO (Ether, SATA, USB3) */
64 UNIPHIER_RESETX(14, 0x2000, 17), /* USB30 */
65 UNIPHIER_RESETX(15, 0x2004, 17), /* USB31 */
66 UNIPHIER_RESETX(40, 0x2000, 13), /* AIO */
67 UNIPHIER_RESET_END,
68};
69
70static const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
71 UNIPHIER_RESETX(2, 0x2000, 2), /* NAND */
72 UNIPHIER_RESETX(8, 0x2000, 10), /* STDMAC (HSC) */
73 UNIPHIER_RESETX(12, 0x2000, 6), /* GIO (PCIe, USB3) */
74 UNIPHIER_RESETX(14, 0x2000, 17), /* USB30 */
75 UNIPHIER_RESETX(15, 0x2004, 17), /* USB31 */
76 UNIPHIER_RESETX(40, 0x2000, 13), /* AIO */
77 UNIPHIER_RESET_END,
78};
79
80static const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
81 UNIPHIER_RESETX(2, 0x2000, 2), /* NAND */
82 UNIPHIER_RESETX(6, 0x2000, 12), /* Ether */
83 UNIPHIER_RESETX(8, 0x2000, 10), /* STDMAC (HSC, RLE) */
84 UNIPHIER_RESETX(14, 0x2000, 17), /* USB30 */
85 UNIPHIER_RESETX(15, 0x2004, 17), /* USB31 */
86 UNIPHIER_RESETX(16, 0x2014, 4), /* USB30-PHY0 */
87 UNIPHIER_RESETX(17, 0x2014, 0), /* USB30-PHY1 */
88 UNIPHIER_RESETX(18, 0x2014, 2), /* USB30-PHY2 */
89 UNIPHIER_RESETX(20, 0x2014, 5), /* USB31-PHY0 */
90 UNIPHIER_RESETX(21, 0x2014, 1), /* USB31-PHY1 */
91 UNIPHIER_RESETX(28, 0x2014, 12), /* SATA */
92 UNIPHIER_RESET(29, 0x2014, 8), /* SATA-PHY (active high) */
93 UNIPHIER_RESETX(40, 0x2000, 13), /* AIO */
94 UNIPHIER_RESET_END,
95};
96
97static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
98 UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
99 UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
100 UNIPHIER_RESETX(6, 0x200c, 6), /* Ether */
101 UNIPHIER_RESETX(8, 0x200c, 8), /* STDMAC (HSC, MIO) */
102 UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
103 UNIPHIER_RESETX(41, 0x2008, 1), /* EVEA */
104 UNIPHIER_RESETX(42, 0x2010, 2), /* EXIV */
105 UNIPHIER_RESET_END,
106};
107
108static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
109 UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
110 UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
111 UNIPHIER_RESETX(6, 0x200c, 6), /* Ether */
112 UNIPHIER_RESETX(8, 0x200c, 8), /* STDMAC (HSC) */
113 UNIPHIER_RESETX(14, 0x200c, 5), /* USB30 */
114 UNIPHIER_RESETX(16, 0x200c, 12), /* USB30-PHY0 */
115 UNIPHIER_RESETX(17, 0x200c, 13), /* USB30-PHY1 */
116 UNIPHIER_RESETX(18, 0x200c, 14), /* USB30-PHY2 */
117 UNIPHIER_RESETX(19, 0x200c, 15), /* USB30-PHY3 */
118 UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
119 UNIPHIER_RESETX(41, 0x2008, 1), /* EVEA */
120 UNIPHIER_RESETX(42, 0x2010, 2), /* EXIV */
121 UNIPHIER_RESET_END,
122};
123
124static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = {
125 UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
126 UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
127 UNIPHIER_RESETX(6, 0x200c, 9), /* Ether0 */
128 UNIPHIER_RESETX(7, 0x200c, 10), /* Ether1 */
129 UNIPHIER_RESETX(8, 0x200c, 12), /* STDMAC */
130 UNIPHIER_RESETX(12, 0x200c, 4), /* USB30 link */
131 UNIPHIER_RESETX(13, 0x200c, 5), /* USB31 link */
132 UNIPHIER_RESETX(16, 0x200c, 16), /* USB30-PHY0 */
133 UNIPHIER_RESETX(17, 0x200c, 18), /* USB30-PHY1 */
134 UNIPHIER_RESETX(18, 0x200c, 20), /* USB30-PHY2 */
135 UNIPHIER_RESETX(20, 0x200c, 17), /* USB31-PHY0 */
136 UNIPHIER_RESETX(21, 0x200c, 19), /* USB31-PHY1 */
137 UNIPHIER_RESET_END,
138};
139
140/* Media I/O reset data */
141#define UNIPHIER_MIO_RESET_SD(id, ch) \
142 UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 0)
143
144#define UNIPHIER_MIO_RESET_SD_BRIDGE(id, ch) \
145 UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 26)
146
147#define UNIPHIER_MIO_RESET_EMMC_HW_RESET(id, ch) \
148 UNIPHIER_RESETX((id), 0x80 + 0x200 * (ch), 0)
149
150#define UNIPHIER_MIO_RESET_USB2(id, ch) \
151 UNIPHIER_RESETX((id), 0x114 + 0x200 * (ch), 0)
152
153#define UNIPHIER_MIO_RESET_USB2_BRIDGE(id, ch) \
154 UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 24)
155
156#define UNIPHIER_MIO_RESET_DMAC(id) \
157 UNIPHIER_RESETX((id), 0x110, 17)
158
159static const struct uniphier_reset_data uniphier_ld4_mio_reset_data[] = {
160 UNIPHIER_MIO_RESET_SD(0, 0),
161 UNIPHIER_MIO_RESET_SD(1, 1),
162 UNIPHIER_MIO_RESET_SD(2, 2),
163 UNIPHIER_MIO_RESET_SD_BRIDGE(3, 0),
164 UNIPHIER_MIO_RESET_SD_BRIDGE(4, 1),
165 UNIPHIER_MIO_RESET_SD_BRIDGE(5, 2),
166 UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1),
167 UNIPHIER_MIO_RESET_DMAC(7),
168 UNIPHIER_MIO_RESET_USB2(8, 0),
169 UNIPHIER_MIO_RESET_USB2(9, 1),
170 UNIPHIER_MIO_RESET_USB2(10, 2),
171 UNIPHIER_MIO_RESET_USB2_BRIDGE(12, 0),
172 UNIPHIER_MIO_RESET_USB2_BRIDGE(13, 1),
173 UNIPHIER_MIO_RESET_USB2_BRIDGE(14, 2),
174 UNIPHIER_RESET_END,
175};
176
177static const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
178 UNIPHIER_MIO_RESET_SD(0, 0),
179 UNIPHIER_MIO_RESET_SD(1, 1),
180 UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1),
181 UNIPHIER_RESET_END,
182};
183
184/* Peripheral reset data */
185#define UNIPHIER_PERI_RESET_UART(id, ch) \
186 UNIPHIER_RESETX((id), 0x114, 19 + (ch))
187
188#define UNIPHIER_PERI_RESET_I2C(id, ch) \
189 UNIPHIER_RESETX((id), 0x114, 5 + (ch))
190
191#define UNIPHIER_PERI_RESET_FI2C(id, ch) \
192 UNIPHIER_RESETX((id), 0x114, 24 + (ch))
193
194static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
195 UNIPHIER_PERI_RESET_UART(0, 0),
196 UNIPHIER_PERI_RESET_UART(1, 1),
197 UNIPHIER_PERI_RESET_UART(2, 2),
198 UNIPHIER_PERI_RESET_UART(3, 3),
199 UNIPHIER_PERI_RESET_I2C(4, 0),
200 UNIPHIER_PERI_RESET_I2C(5, 1),
201 UNIPHIER_PERI_RESET_I2C(6, 2),
202 UNIPHIER_PERI_RESET_I2C(7, 3),
203 UNIPHIER_PERI_RESET_I2C(8, 4),
204 UNIPHIER_RESET_END,
205};
206
207static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
208 UNIPHIER_PERI_RESET_UART(0, 0),
209 UNIPHIER_PERI_RESET_UART(1, 1),
210 UNIPHIER_PERI_RESET_UART(2, 2),
211 UNIPHIER_PERI_RESET_UART(3, 3),
212 UNIPHIER_PERI_RESET_FI2C(4, 0),
213 UNIPHIER_PERI_RESET_FI2C(5, 1),
214 UNIPHIER_PERI_RESET_FI2C(6, 2),
215 UNIPHIER_PERI_RESET_FI2C(7, 3),
216 UNIPHIER_PERI_RESET_FI2C(8, 4),
217 UNIPHIER_PERI_RESET_FI2C(9, 5),
218 UNIPHIER_PERI_RESET_FI2C(10, 6),
219 UNIPHIER_RESET_END,
220};
221
222/* Analog signal amplifiers reset data */
223static const struct uniphier_reset_data uniphier_ld11_adamv_reset_data[] = {
224 UNIPHIER_RESETX(0, 0x10, 6), /* EVEA */
225 UNIPHIER_RESET_END,
226};
227
228/* core implementaton */
229struct uniphier_reset_priv {
230 struct reset_controller_dev rcdev;
231 struct device *dev;
232 struct regmap *regmap;
233 const struct uniphier_reset_data *data;
234};
235
236#define to_uniphier_reset_priv(_rcdev) \
237 container_of(_rcdev, struct uniphier_reset_priv, rcdev)
238
239static int uniphier_reset_update(struct reset_controller_dev *rcdev,
240 unsigned long id, int assert)
241{
242 struct uniphier_reset_priv *priv = to_uniphier_reset_priv(rcdev);
243 const struct uniphier_reset_data *p;
244
245 for (p = priv->data; p->id != UNIPHIER_RESET_ID_END; p++) {
246 unsigned int mask, val;
247
248 if (p->id != id)
249 continue;
250
251 mask = BIT(p->bit);
252
253 if (assert)
254 val = mask;
255 else
256 val = ~mask;
257
258 if (p->flags & UNIPHIER_RESET_ACTIVE_LOW)
259 val = ~val;
260
261 return regmap_write_bits(priv->regmap, p->reg, mask, val);
262 }
263
264 dev_err(priv->dev, "reset_id=%lu was not handled\n", id);
265 return -EINVAL;
266}
267
268static int uniphier_reset_assert(struct reset_controller_dev *rcdev,
269 unsigned long id)
270{
271 return uniphier_reset_update(rcdev, id, 1);
272}
273
274static int uniphier_reset_deassert(struct reset_controller_dev *rcdev,
275 unsigned long id)
276{
277 return uniphier_reset_update(rcdev, id, 0);
278}
279
280static int uniphier_reset_status(struct reset_controller_dev *rcdev,
281 unsigned long id)
282{
283 struct uniphier_reset_priv *priv = to_uniphier_reset_priv(rcdev);
284 const struct uniphier_reset_data *p;
285
286 for (p = priv->data; p->id != UNIPHIER_RESET_ID_END; p++) {
287 unsigned int val;
288 int ret, asserted;
289
290 if (p->id != id)
291 continue;
292
293 ret = regmap_read(priv->regmap, p->reg, &val);
294 if (ret)
295 return ret;
296
297 asserted = !!(val & BIT(p->bit));
298
299 if (p->flags & UNIPHIER_RESET_ACTIVE_LOW)
300 asserted = !asserted;
301
302 return asserted;
303 }
304
305 dev_err(priv->dev, "reset_id=%lu was not found\n", id);
306 return -EINVAL;
307}
308
309static const struct reset_control_ops uniphier_reset_ops = {
310 .assert = uniphier_reset_assert,
311 .deassert = uniphier_reset_deassert,
312 .status = uniphier_reset_status,
313};
314
315static int uniphier_reset_probe(struct platform_device *pdev)
316{
317 struct device *dev = &pdev->dev;
318 struct uniphier_reset_priv *priv;
319 const struct uniphier_reset_data *p, *data;
320 struct regmap *regmap;
321 struct device_node *parent;
322 unsigned int nr_resets = 0;
323
324 data = of_device_get_match_data(dev);
325 if (WARN_ON(!data))
326 return -EINVAL;
327
328 parent = of_get_parent(dev->of_node); /* parent should be syscon node */
329 regmap = syscon_node_to_regmap(parent);
330 of_node_put(parent);
331 if (IS_ERR(regmap)) {
332 dev_err(dev, "failed to get regmap (error %ld)\n",
333 PTR_ERR(regmap));
334 return PTR_ERR(regmap);
335 }
336
337 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
338 if (!priv)
339 return -ENOMEM;
340
341 for (p = data; p->id != UNIPHIER_RESET_ID_END; p++)
342 nr_resets = max(nr_resets, p->id + 1);
343
344 priv->rcdev.ops = &uniphier_reset_ops;
345 priv->rcdev.owner = dev->driver->owner;
346 priv->rcdev.of_node = dev->of_node;
347 priv->rcdev.nr_resets = nr_resets;
348 priv->dev = dev;
349 priv->regmap = regmap;
350 priv->data = data;
351
352 return devm_reset_controller_register(&pdev->dev, &priv->rcdev);
353}
354
355static const struct of_device_id uniphier_reset_match[] = {
356 /* System reset */
357 {
358 .compatible = "socionext,uniphier-ld4-reset",
359 .data = uniphier_ld4_sys_reset_data,
360 },
361 {
362 .compatible = "socionext,uniphier-pro4-reset",
363 .data = uniphier_pro4_sys_reset_data,
364 },
365 {
366 .compatible = "socionext,uniphier-sld8-reset",
367 .data = uniphier_ld4_sys_reset_data,
368 },
369 {
370 .compatible = "socionext,uniphier-pro5-reset",
371 .data = uniphier_pro5_sys_reset_data,
372 },
373 {
374 .compatible = "socionext,uniphier-pxs2-reset",
375 .data = uniphier_pxs2_sys_reset_data,
376 },
377 {
378 .compatible = "socionext,uniphier-ld11-reset",
379 .data = uniphier_ld11_sys_reset_data,
380 },
381 {
382 .compatible = "socionext,uniphier-ld20-reset",
383 .data = uniphier_ld20_sys_reset_data,
384 },
385 {
386 .compatible = "socionext,uniphier-pxs3-reset",
387 .data = uniphier_pxs3_sys_reset_data,
388 },
389 /* Media I/O reset, SD reset */
390 {
391 .compatible = "socionext,uniphier-ld4-mio-reset",
392 .data = uniphier_ld4_mio_reset_data,
393 },
394 {
395 .compatible = "socionext,uniphier-pro4-mio-reset",
396 .data = uniphier_ld4_mio_reset_data,
397 },
398 {
399 .compatible = "socionext,uniphier-sld8-mio-reset",
400 .data = uniphier_ld4_mio_reset_data,
401 },
402 {
403 .compatible = "socionext,uniphier-pro5-sd-reset",
404 .data = uniphier_pro5_sd_reset_data,
405 },
406 {
407 .compatible = "socionext,uniphier-pxs2-sd-reset",
408 .data = uniphier_pro5_sd_reset_data,
409 },
410 {
411 .compatible = "socionext,uniphier-ld11-mio-reset",
412 .data = uniphier_ld4_mio_reset_data,
413 },
414 {
415 .compatible = "socionext,uniphier-ld11-sd-reset",
416 .data = uniphier_pro5_sd_reset_data,
417 },
418 {
419 .compatible = "socionext,uniphier-ld20-sd-reset",
420 .data = uniphier_pro5_sd_reset_data,
421 },
422 {
423 .compatible = "socionext,uniphier-pxs3-sd-reset",
424 .data = uniphier_pro5_sd_reset_data,
425 },
426 /* Peripheral reset */
427 {
428 .compatible = "socionext,uniphier-ld4-peri-reset",
429 .data = uniphier_ld4_peri_reset_data,
430 },
431 {
432 .compatible = "socionext,uniphier-pro4-peri-reset",
433 .data = uniphier_pro4_peri_reset_data,
434 },
435 {
436 .compatible = "socionext,uniphier-sld8-peri-reset",
437 .data = uniphier_ld4_peri_reset_data,
438 },
439 {
440 .compatible = "socionext,uniphier-pro5-peri-reset",
441 .data = uniphier_pro4_peri_reset_data,
442 },
443 {
444 .compatible = "socionext,uniphier-pxs2-peri-reset",
445 .data = uniphier_pro4_peri_reset_data,
446 },
447 {
448 .compatible = "socionext,uniphier-ld11-peri-reset",
449 .data = uniphier_pro4_peri_reset_data,
450 },
451 {
452 .compatible = "socionext,uniphier-ld20-peri-reset",
453 .data = uniphier_pro4_peri_reset_data,
454 },
455 {
456 .compatible = "socionext,uniphier-pxs3-peri-reset",
457 .data = uniphier_pro4_peri_reset_data,
458 },
459 /* Analog signal amplifiers reset */
460 {
461 .compatible = "socionext,uniphier-ld11-adamv-reset",
462 .data = uniphier_ld11_adamv_reset_data,
463 },
464 {
465 .compatible = "socionext,uniphier-ld20-adamv-reset",
466 .data = uniphier_ld11_adamv_reset_data,
467 },
468 { /* sentinel */ }
469};
470MODULE_DEVICE_TABLE(of, uniphier_reset_match);
471
472static struct platform_driver uniphier_reset_driver = {
473 .probe = uniphier_reset_probe,
474 .driver = {
475 .name = "uniphier-reset",
476 .of_match_table = uniphier_reset_match,
477 },
478};
479module_platform_driver(uniphier_reset_driver);
480
481MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
482MODULE_DESCRIPTION("UniPhier Reset Controller Driver");
483MODULE_LICENSE("GPL");