Linux Audio

Check our new training course

Loading...
v5.9
  1// SPDX-License-Identifier: GPL-2.0
  2#include <linux/kernel.h>
  3#include <linux/gfp.h>
  4#include <linux/ide.h>
  5
  6int generic_ide_suspend(struct device *dev, pm_message_t mesg)
  7{
  8	ide_drive_t *drive = to_ide_device(dev);
  9	ide_drive_t *pair = ide_get_pair_dev(drive);
 10	ide_hwif_t *hwif = drive->hwif;
 11	struct request *rq;
 12	struct ide_pm_state rqpm;
 13	int ret;
 14
 15	if (ide_port_acpi(hwif)) {
 16		/* call ACPI _GTM only once */
 17		if ((drive->dn & 1) == 0 || pair == NULL)
 18			ide_acpi_get_timing(hwif);
 19	}
 20
 21	memset(&rqpm, 0, sizeof(rqpm));
 22	rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
 23	ide_req(rq)->type = ATA_PRIV_PM_SUSPEND;
 24	ide_req(rq)->special = &rqpm;
 25	rqpm.pm_step = IDE_PM_START_SUSPEND;
 26	if (mesg.event == PM_EVENT_PRETHAW)
 27		mesg.event = PM_EVENT_FREEZE;
 28	rqpm.pm_state = mesg.event;
 29
 30	blk_execute_rq(drive->queue, NULL, rq, 0);
 31	ret = scsi_req(rq)->result ? -EIO : 0;
 32	blk_put_request(rq);
 33
 34	if (ret == 0 && ide_port_acpi(hwif)) {
 35		/* call ACPI _PS3 only after both devices are suspended */
 36		if ((drive->dn & 1) || pair == NULL)
 37			ide_acpi_set_state(hwif, 0);
 38	}
 39
 40	return ret;
 41}
 42
 
 
 
 
 
 43static int ide_pm_execute_rq(struct request *rq)
 44{
 45	struct request_queue *q = rq->q;
 
 46
 
 
 
 
 47	if (unlikely(blk_queue_dying(q))) {
 48		rq->rq_flags |= RQF_QUIET;
 49		scsi_req(rq)->result = -ENXIO;
 50		blk_mq_end_request(rq, BLK_STS_OK);
 
 51		return -ENXIO;
 52	}
 53	blk_execute_rq(q, NULL, rq, true);
 
 
 
 
 54
 55	return scsi_req(rq)->result ? -EIO : 0;
 56}
 57
 58int generic_ide_resume(struct device *dev)
 59{
 60	ide_drive_t *drive = to_ide_device(dev);
 61	ide_drive_t *pair = ide_get_pair_dev(drive);
 62	ide_hwif_t *hwif = drive->hwif;
 63	struct request *rq;
 64	struct ide_pm_state rqpm;
 65	int err;
 66
 67	blk_mq_start_stopped_hw_queues(drive->queue, true);
 68
 69	if (ide_port_acpi(hwif)) {
 70		/* call ACPI _PS0 / _STM only once */
 71		if ((drive->dn & 1) == 0 || pair == NULL) {
 72			ide_acpi_set_state(hwif, 1);
 73			ide_acpi_push_timing(hwif);
 74		}
 75
 76		ide_acpi_exec_tfs(drive);
 77	}
 78
 79	memset(&rqpm, 0, sizeof(rqpm));
 80	rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_PREEMPT);
 
 81	ide_req(rq)->type = ATA_PRIV_PM_RESUME;
 82	ide_req(rq)->special = &rqpm;
 83	rqpm.pm_step = IDE_PM_START_RESUME;
 84	rqpm.pm_state = PM_EVENT_ON;
 85
 86	err = ide_pm_execute_rq(rq);
 87	blk_put_request(rq);
 88
 89	if (err == 0 && dev->driver) {
 90		struct ide_driver *drv = to_ide_driver(dev->driver);
 91
 92		if (drv->resume)
 93			drv->resume(drive);
 94	}
 95
 96	return err;
 97}
 98
 99void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
100{
101	struct ide_pm_state *pm = ide_req(rq)->special;
102
103#ifdef DEBUG_PM
104	printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
105		drive->name, pm->pm_step);
106#endif
107	if (drive->media != ide_disk)
108		return;
109
110	switch (pm->pm_step) {
111	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
112		if (pm->pm_state == PM_EVENT_FREEZE)
113			pm->pm_step = IDE_PM_COMPLETED;
114		else
115			pm->pm_step = IDE_PM_STANDBY;
116		break;
117	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
118		pm->pm_step = IDE_PM_COMPLETED;
119		break;
120	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
121		pm->pm_step = IDE_PM_IDLE;
122		break;
123	case IDE_PM_IDLE:		/* Resume step 2 (idle)*/
124		pm->pm_step = IDE_PM_RESTORE_DMA;
125		break;
126	}
127}
128
129ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
130{
131	struct ide_pm_state *pm = ide_req(rq)->special;
132	struct ide_cmd cmd = { };
133
134	switch (pm->pm_step) {
135	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
136		if (drive->media != ide_disk)
137			break;
138		/* Not supported? Switch to next step now. */
139		if (ata_id_flush_enabled(drive->id) == 0 ||
140		    (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
141			ide_complete_power_step(drive, rq);
142			return ide_stopped;
143		}
144		if (ata_id_flush_ext_enabled(drive->id))
145			cmd.tf.command = ATA_CMD_FLUSH_EXT;
146		else
147			cmd.tf.command = ATA_CMD_FLUSH;
148		goto out_do_tf;
149	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
150		cmd.tf.command = ATA_CMD_STANDBYNOW1;
151		goto out_do_tf;
152	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
153		ide_set_max_pio(drive);
154		/*
155		 * skip IDE_PM_IDLE for ATAPI devices
156		 */
157		if (drive->media != ide_disk)
158			pm->pm_step = IDE_PM_RESTORE_DMA;
159		else
160			ide_complete_power_step(drive, rq);
161		return ide_stopped;
162	case IDE_PM_IDLE:		/* Resume step 2 (idle) */
163		cmd.tf.command = ATA_CMD_IDLEIMMEDIATE;
164		goto out_do_tf;
165	case IDE_PM_RESTORE_DMA:	/* Resume step 3 (restore DMA) */
166		/*
167		 * Right now, all we do is call ide_set_dma(drive),
168		 * we could be smarter and check for current xfer_speed
169		 * in struct drive etc...
170		 */
171		if (drive->hwif->dma_ops == NULL)
172			break;
173		/*
174		 * TODO: respect IDE_DFLAG_USING_DMA
175		 */
176		ide_set_dma(drive);
177		break;
178	}
179
180	pm->pm_step = IDE_PM_COMPLETED;
181
182	return ide_stopped;
183
184out_do_tf:
185	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
186	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
187	cmd.protocol = ATA_PROT_NODATA;
188
189	return do_rw_taskfile(drive, &cmd);
190}
191
192/**
193 *	ide_complete_pm_rq - end the current Power Management request
194 *	@drive: target drive
195 *	@rq: request
196 *
197 *	This function cleans up the current PM request and stops the queue
198 *	if necessary.
199 */
200void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
201{
202	struct request_queue *q = drive->queue;
203	struct ide_pm_state *pm = ide_req(rq)->special;
 
204
205	ide_complete_power_step(drive, rq);
206	if (pm->pm_step != IDE_PM_COMPLETED)
207		return;
208
209#ifdef DEBUG_PM
210	printk("%s: completing PM request, %s\n", drive->name,
211	       (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND) ? "suspend" : "resume");
212#endif
 
213	if (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND)
214		blk_mq_stop_hw_queues(q);
215	else
216		drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
 
217
218	drive->hwif->rq = NULL;
219
220	blk_mq_end_request(rq, BLK_STS_OK);
 
221}
222
223void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
224{
225	struct ide_pm_state *pm = ide_req(rq)->special;
226
227	if (blk_rq_is_private(rq) &&
228	    ide_req(rq)->type == ATA_PRIV_PM_SUSPEND &&
229	    pm->pm_step == IDE_PM_START_SUSPEND)
230		/* Mark drive blocked when starting the suspend sequence. */
231		drive->dev_flags |= IDE_DFLAG_BLOCKED;
232	else if (blk_rq_is_private(rq) &&
233	         ide_req(rq)->type == ATA_PRIV_PM_RESUME &&
234		 pm->pm_step == IDE_PM_START_RESUME) {
235		/*
236		 * The first thing we do on wakeup is to wait for BSY bit to
237		 * go away (with a looong timeout) as a drive on this hwif may
238		 * just be POSTing itself.
239		 * We do that before even selecting as the "other" device on
240		 * the bus may be broken enough to walk on our toes at this
241		 * point.
242		 */
243		ide_hwif_t *hwif = drive->hwif;
244		const struct ide_tp_ops *tp_ops = hwif->tp_ops;
245		struct request_queue *q = drive->queue;
 
246		int rc;
247#ifdef DEBUG_PM
248		printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
249#endif
250		rc = ide_wait_not_busy(hwif, 35000);
251		if (rc)
252			printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
253		tp_ops->dev_select(drive);
254		tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
255		rc = ide_wait_not_busy(hwif, 100000);
256		if (rc)
257			printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
258
259		blk_mq_start_hw_queues(q);
 
 
260	}
261}
v4.17
  1// SPDX-License-Identifier: GPL-2.0
  2#include <linux/kernel.h>
  3#include <linux/gfp.h>
  4#include <linux/ide.h>
  5
  6int generic_ide_suspend(struct device *dev, pm_message_t mesg)
  7{
  8	ide_drive_t *drive = to_ide_device(dev);
  9	ide_drive_t *pair = ide_get_pair_dev(drive);
 10	ide_hwif_t *hwif = drive->hwif;
 11	struct request *rq;
 12	struct ide_pm_state rqpm;
 13	int ret;
 14
 15	if (ide_port_acpi(hwif)) {
 16		/* call ACPI _GTM only once */
 17		if ((drive->dn & 1) == 0 || pair == NULL)
 18			ide_acpi_get_timing(hwif);
 19	}
 20
 21	memset(&rqpm, 0, sizeof(rqpm));
 22	rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, __GFP_RECLAIM);
 23	ide_req(rq)->type = ATA_PRIV_PM_SUSPEND;
 24	rq->special = &rqpm;
 25	rqpm.pm_step = IDE_PM_START_SUSPEND;
 26	if (mesg.event == PM_EVENT_PRETHAW)
 27		mesg.event = PM_EVENT_FREEZE;
 28	rqpm.pm_state = mesg.event;
 29
 30	blk_execute_rq(drive->queue, NULL, rq, 0);
 31	ret = scsi_req(rq)->result ? -EIO : 0;
 32	blk_put_request(rq);
 33
 34	if (ret == 0 && ide_port_acpi(hwif)) {
 35		/* call ACPI _PS3 only after both devices are suspended */
 36		if ((drive->dn & 1) || pair == NULL)
 37			ide_acpi_set_state(hwif, 0);
 38	}
 39
 40	return ret;
 41}
 42
 43static void ide_end_sync_rq(struct request *rq, blk_status_t error)
 44{
 45	complete(rq->end_io_data);
 46}
 47
 48static int ide_pm_execute_rq(struct request *rq)
 49{
 50	struct request_queue *q = rq->q;
 51	DECLARE_COMPLETION_ONSTACK(wait);
 52
 53	rq->end_io_data = &wait;
 54	rq->end_io = ide_end_sync_rq;
 55
 56	spin_lock_irq(q->queue_lock);
 57	if (unlikely(blk_queue_dying(q))) {
 58		rq->rq_flags |= RQF_QUIET;
 59		scsi_req(rq)->result = -ENXIO;
 60		__blk_end_request_all(rq, BLK_STS_OK);
 61		spin_unlock_irq(q->queue_lock);
 62		return -ENXIO;
 63	}
 64	__elv_add_request(q, rq, ELEVATOR_INSERT_FRONT);
 65	__blk_run_queue_uncond(q);
 66	spin_unlock_irq(q->queue_lock);
 67
 68	wait_for_completion_io(&wait);
 69
 70	return scsi_req(rq)->result ? -EIO : 0;
 71}
 72
 73int generic_ide_resume(struct device *dev)
 74{
 75	ide_drive_t *drive = to_ide_device(dev);
 76	ide_drive_t *pair = ide_get_pair_dev(drive);
 77	ide_hwif_t *hwif = drive->hwif;
 78	struct request *rq;
 79	struct ide_pm_state rqpm;
 80	int err;
 81
 
 
 82	if (ide_port_acpi(hwif)) {
 83		/* call ACPI _PS0 / _STM only once */
 84		if ((drive->dn & 1) == 0 || pair == NULL) {
 85			ide_acpi_set_state(hwif, 1);
 86			ide_acpi_push_timing(hwif);
 87		}
 88
 89		ide_acpi_exec_tfs(drive);
 90	}
 91
 92	memset(&rqpm, 0, sizeof(rqpm));
 93	rq = blk_get_request_flags(drive->queue, REQ_OP_DRV_IN,
 94				   BLK_MQ_REQ_PREEMPT);
 95	ide_req(rq)->type = ATA_PRIV_PM_RESUME;
 96	rq->special = &rqpm;
 97	rqpm.pm_step = IDE_PM_START_RESUME;
 98	rqpm.pm_state = PM_EVENT_ON;
 99
100	err = ide_pm_execute_rq(rq);
101	blk_put_request(rq);
102
103	if (err == 0 && dev->driver) {
104		struct ide_driver *drv = to_ide_driver(dev->driver);
105
106		if (drv->resume)
107			drv->resume(drive);
108	}
109
110	return err;
111}
112
113void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
114{
115	struct ide_pm_state *pm = rq->special;
116
117#ifdef DEBUG_PM
118	printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
119		drive->name, pm->pm_step);
120#endif
121	if (drive->media != ide_disk)
122		return;
123
124	switch (pm->pm_step) {
125	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
126		if (pm->pm_state == PM_EVENT_FREEZE)
127			pm->pm_step = IDE_PM_COMPLETED;
128		else
129			pm->pm_step = IDE_PM_STANDBY;
130		break;
131	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
132		pm->pm_step = IDE_PM_COMPLETED;
133		break;
134	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
135		pm->pm_step = IDE_PM_IDLE;
136		break;
137	case IDE_PM_IDLE:		/* Resume step 2 (idle)*/
138		pm->pm_step = IDE_PM_RESTORE_DMA;
139		break;
140	}
141}
142
143ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
144{
145	struct ide_pm_state *pm = rq->special;
146	struct ide_cmd cmd = { };
147
148	switch (pm->pm_step) {
149	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
150		if (drive->media != ide_disk)
151			break;
152		/* Not supported? Switch to next step now. */
153		if (ata_id_flush_enabled(drive->id) == 0 ||
154		    (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
155			ide_complete_power_step(drive, rq);
156			return ide_stopped;
157		}
158		if (ata_id_flush_ext_enabled(drive->id))
159			cmd.tf.command = ATA_CMD_FLUSH_EXT;
160		else
161			cmd.tf.command = ATA_CMD_FLUSH;
162		goto out_do_tf;
163	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
164		cmd.tf.command = ATA_CMD_STANDBYNOW1;
165		goto out_do_tf;
166	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
167		ide_set_max_pio(drive);
168		/*
169		 * skip IDE_PM_IDLE for ATAPI devices
170		 */
171		if (drive->media != ide_disk)
172			pm->pm_step = IDE_PM_RESTORE_DMA;
173		else
174			ide_complete_power_step(drive, rq);
175		return ide_stopped;
176	case IDE_PM_IDLE:		/* Resume step 2 (idle) */
177		cmd.tf.command = ATA_CMD_IDLEIMMEDIATE;
178		goto out_do_tf;
179	case IDE_PM_RESTORE_DMA:	/* Resume step 3 (restore DMA) */
180		/*
181		 * Right now, all we do is call ide_set_dma(drive),
182		 * we could be smarter and check for current xfer_speed
183		 * in struct drive etc...
184		 */
185		if (drive->hwif->dma_ops == NULL)
186			break;
187		/*
188		 * TODO: respect IDE_DFLAG_USING_DMA
189		 */
190		ide_set_dma(drive);
191		break;
192	}
193
194	pm->pm_step = IDE_PM_COMPLETED;
195
196	return ide_stopped;
197
198out_do_tf:
199	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
200	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
201	cmd.protocol = ATA_PROT_NODATA;
202
203	return do_rw_taskfile(drive, &cmd);
204}
205
206/**
207 *	ide_complete_pm_rq - end the current Power Management request
208 *	@drive: target drive
209 *	@rq: request
210 *
211 *	This function cleans up the current PM request and stops the queue
212 *	if necessary.
213 */
214void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
215{
216	struct request_queue *q = drive->queue;
217	struct ide_pm_state *pm = rq->special;
218	unsigned long flags;
219
220	ide_complete_power_step(drive, rq);
221	if (pm->pm_step != IDE_PM_COMPLETED)
222		return;
223
224#ifdef DEBUG_PM
225	printk("%s: completing PM request, %s\n", drive->name,
226	       (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND) ? "suspend" : "resume");
227#endif
228	spin_lock_irqsave(q->queue_lock, flags);
229	if (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND)
230		blk_stop_queue(q);
231	else
232		drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
233	spin_unlock_irqrestore(q->queue_lock, flags);
234
235	drive->hwif->rq = NULL;
236
237	if (blk_end_request(rq, BLK_STS_OK, 0))
238		BUG();
239}
240
241void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
242{
243	struct ide_pm_state *pm = rq->special;
244
245	if (blk_rq_is_private(rq) &&
246	    ide_req(rq)->type == ATA_PRIV_PM_SUSPEND &&
247	    pm->pm_step == IDE_PM_START_SUSPEND)
248		/* Mark drive blocked when starting the suspend sequence. */
249		drive->dev_flags |= IDE_DFLAG_BLOCKED;
250	else if (blk_rq_is_private(rq) &&
251	         ide_req(rq)->type == ATA_PRIV_PM_RESUME &&
252		 pm->pm_step == IDE_PM_START_RESUME) {
253		/*
254		 * The first thing we do on wakeup is to wait for BSY bit to
255		 * go away (with a looong timeout) as a drive on this hwif may
256		 * just be POSTing itself.
257		 * We do that before even selecting as the "other" device on
258		 * the bus may be broken enough to walk on our toes at this
259		 * point.
260		 */
261		ide_hwif_t *hwif = drive->hwif;
262		const struct ide_tp_ops *tp_ops = hwif->tp_ops;
263		struct request_queue *q = drive->queue;
264		unsigned long flags;
265		int rc;
266#ifdef DEBUG_PM
267		printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
268#endif
269		rc = ide_wait_not_busy(hwif, 35000);
270		if (rc)
271			printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
272		tp_ops->dev_select(drive);
273		tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
274		rc = ide_wait_not_busy(hwif, 100000);
275		if (rc)
276			printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
277
278		spin_lock_irqsave(q->queue_lock, flags);
279		blk_start_queue(q);
280		spin_unlock_irqrestore(q->queue_lock, flags);
281	}
282}