Loading...
1/*
2 * Broadcom Kona GPIO Driver
3 *
4 * Author: Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>
5 * Copyright (C) 2012-2014 Broadcom Corporation
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation version 2.
10 *
11 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
12 * kind, whether express or implied; without even the implied warranty
13 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 */
16
17#include <linux/bitops.h>
18#include <linux/err.h>
19#include <linux/io.h>
20#include <linux/gpio/driver.h>
21#include <linux/of_device.h>
22#include <linux/init.h>
23#include <linux/irqdomain.h>
24#include <linux/irqchip/chained_irq.h>
25
26#define BCM_GPIO_PASSWD 0x00a5a501
27#define GPIO_PER_BANK 32
28#define GPIO_MAX_BANK_NUM 8
29
30#define GPIO_BANK(gpio) ((gpio) >> 5)
31#define GPIO_BIT(gpio) ((gpio) & (GPIO_PER_BANK - 1))
32
33/* There is a GPIO control register for each GPIO */
34#define GPIO_CONTROL(gpio) (0x00000100 + ((gpio) << 2))
35
36/* The remaining registers are per GPIO bank */
37#define GPIO_OUT_STATUS(bank) (0x00000000 + ((bank) << 2))
38#define GPIO_IN_STATUS(bank) (0x00000020 + ((bank) << 2))
39#define GPIO_OUT_SET(bank) (0x00000040 + ((bank) << 2))
40#define GPIO_OUT_CLEAR(bank) (0x00000060 + ((bank) << 2))
41#define GPIO_INT_STATUS(bank) (0x00000080 + ((bank) << 2))
42#define GPIO_INT_MASK(bank) (0x000000a0 + ((bank) << 2))
43#define GPIO_INT_MSKCLR(bank) (0x000000c0 + ((bank) << 2))
44#define GPIO_PWD_STATUS(bank) (0x00000500 + ((bank) << 2))
45
46#define GPIO_GPPWR_OFFSET 0x00000520
47
48#define GPIO_GPCTR0_DBR_SHIFT 5
49#define GPIO_GPCTR0_DBR_MASK 0x000001e0
50
51#define GPIO_GPCTR0_ITR_SHIFT 3
52#define GPIO_GPCTR0_ITR_MASK 0x00000018
53#define GPIO_GPCTR0_ITR_CMD_RISING_EDGE 0x00000001
54#define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE 0x00000002
55#define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE 0x00000003
56
57#define GPIO_GPCTR0_IOTR_MASK 0x00000001
58#define GPIO_GPCTR0_IOTR_CMD_0UTPUT 0x00000000
59#define GPIO_GPCTR0_IOTR_CMD_INPUT 0x00000001
60
61#define GPIO_GPCTR0_DB_ENABLE_MASK 0x00000100
62
63#define LOCK_CODE 0xffffffff
64#define UNLOCK_CODE 0x00000000
65
66struct bcm_kona_gpio {
67 void __iomem *reg_base;
68 int num_bank;
69 raw_spinlock_t lock;
70 struct gpio_chip gpio_chip;
71 struct irq_domain *irq_domain;
72 struct bcm_kona_gpio_bank *banks;
73 struct platform_device *pdev;
74};
75
76struct bcm_kona_gpio_bank {
77 int id;
78 int irq;
79 /* Used in the interrupt handler */
80 struct bcm_kona_gpio *kona_gpio;
81};
82
83static inline void bcm_kona_gpio_write_lock_regs(void __iomem *reg_base,
84 int bank_id, u32 lockcode)
85{
86 writel(BCM_GPIO_PASSWD, reg_base + GPIO_GPPWR_OFFSET);
87 writel(lockcode, reg_base + GPIO_PWD_STATUS(bank_id));
88}
89
90static void bcm_kona_gpio_lock_gpio(struct bcm_kona_gpio *kona_gpio,
91 unsigned gpio)
92{
93 u32 val;
94 unsigned long flags;
95 int bank_id = GPIO_BANK(gpio);
96
97 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
98
99 val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
100 val |= BIT(gpio);
101 bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
102
103 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
104}
105
106static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
107 unsigned gpio)
108{
109 u32 val;
110 unsigned long flags;
111 int bank_id = GPIO_BANK(gpio);
112
113 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
114
115 val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
116 val &= ~BIT(gpio);
117 bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
118
119 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
120}
121
122static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
123{
124 struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
125 void __iomem *reg_base = kona_gpio->reg_base;
126 u32 val;
127
128 val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
129 return val ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT;
130}
131
132static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
133{
134 struct bcm_kona_gpio *kona_gpio;
135 void __iomem *reg_base;
136 int bank_id = GPIO_BANK(gpio);
137 int bit = GPIO_BIT(gpio);
138 u32 val, reg_offset;
139 unsigned long flags;
140
141 kona_gpio = gpiochip_get_data(chip);
142 reg_base = kona_gpio->reg_base;
143 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
144
145 /* this function only applies to output pin */
146 if (bcm_kona_gpio_get_dir(chip, gpio) == GPIO_LINE_DIRECTION_IN)
147 goto out;
148
149 reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
150
151 val = readl(reg_base + reg_offset);
152 val |= BIT(bit);
153 writel(val, reg_base + reg_offset);
154
155out:
156 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
157}
158
159static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
160{
161 struct bcm_kona_gpio *kona_gpio;
162 void __iomem *reg_base;
163 int bank_id = GPIO_BANK(gpio);
164 int bit = GPIO_BIT(gpio);
165 u32 val, reg_offset;
166 unsigned long flags;
167
168 kona_gpio = gpiochip_get_data(chip);
169 reg_base = kona_gpio->reg_base;
170 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
171
172 if (bcm_kona_gpio_get_dir(chip, gpio) == GPIO_LINE_DIRECTION_IN)
173 reg_offset = GPIO_IN_STATUS(bank_id);
174 else
175 reg_offset = GPIO_OUT_STATUS(bank_id);
176
177 /* read the GPIO bank status */
178 val = readl(reg_base + reg_offset);
179
180 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
181
182 /* return the specified bit status */
183 return !!(val & BIT(bit));
184}
185
186static int bcm_kona_gpio_request(struct gpio_chip *chip, unsigned gpio)
187{
188 struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
189
190 bcm_kona_gpio_unlock_gpio(kona_gpio, gpio);
191 return 0;
192}
193
194static void bcm_kona_gpio_free(struct gpio_chip *chip, unsigned gpio)
195{
196 struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
197
198 bcm_kona_gpio_lock_gpio(kona_gpio, gpio);
199}
200
201static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
202{
203 struct bcm_kona_gpio *kona_gpio;
204 void __iomem *reg_base;
205 u32 val;
206 unsigned long flags;
207
208 kona_gpio = gpiochip_get_data(chip);
209 reg_base = kona_gpio->reg_base;
210 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
211
212 val = readl(reg_base + GPIO_CONTROL(gpio));
213 val &= ~GPIO_GPCTR0_IOTR_MASK;
214 val |= GPIO_GPCTR0_IOTR_CMD_INPUT;
215 writel(val, reg_base + GPIO_CONTROL(gpio));
216
217 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
218
219 return 0;
220}
221
222static int bcm_kona_gpio_direction_output(struct gpio_chip *chip,
223 unsigned gpio, int value)
224{
225 struct bcm_kona_gpio *kona_gpio;
226 void __iomem *reg_base;
227 int bank_id = GPIO_BANK(gpio);
228 int bit = GPIO_BIT(gpio);
229 u32 val, reg_offset;
230 unsigned long flags;
231
232 kona_gpio = gpiochip_get_data(chip);
233 reg_base = kona_gpio->reg_base;
234 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
235
236 val = readl(reg_base + GPIO_CONTROL(gpio));
237 val &= ~GPIO_GPCTR0_IOTR_MASK;
238 val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT;
239 writel(val, reg_base + GPIO_CONTROL(gpio));
240 reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
241
242 val = readl(reg_base + reg_offset);
243 val |= BIT(bit);
244 writel(val, reg_base + reg_offset);
245
246 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
247
248 return 0;
249}
250
251static int bcm_kona_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
252{
253 struct bcm_kona_gpio *kona_gpio;
254
255 kona_gpio = gpiochip_get_data(chip);
256 if (gpio >= kona_gpio->gpio_chip.ngpio)
257 return -ENXIO;
258 return irq_create_mapping(kona_gpio->irq_domain, gpio);
259}
260
261static int bcm_kona_gpio_set_debounce(struct gpio_chip *chip, unsigned gpio,
262 unsigned debounce)
263{
264 struct bcm_kona_gpio *kona_gpio;
265 void __iomem *reg_base;
266 u32 val, res;
267 unsigned long flags;
268
269 kona_gpio = gpiochip_get_data(chip);
270 reg_base = kona_gpio->reg_base;
271 /* debounce must be 1-128ms (or 0) */
272 if ((debounce > 0 && debounce < 1000) || debounce > 128000) {
273 dev_err(chip->parent, "Debounce value %u not in range\n",
274 debounce);
275 return -EINVAL;
276 }
277
278 /* calculate debounce bit value */
279 if (debounce != 0) {
280 /* Convert to ms */
281 debounce /= 1000;
282 /* find the MSB */
283 res = fls(debounce) - 1;
284 /* Check if MSB-1 is set (round up or down) */
285 if (res > 0 && (debounce & BIT(res - 1)))
286 res++;
287 }
288
289 /* spin lock for read-modify-write of the GPIO register */
290 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
291
292 val = readl(reg_base + GPIO_CONTROL(gpio));
293 val &= ~GPIO_GPCTR0_DBR_MASK;
294
295 if (debounce == 0) {
296 /* disable debounce */
297 val &= ~GPIO_GPCTR0_DB_ENABLE_MASK;
298 } else {
299 val |= GPIO_GPCTR0_DB_ENABLE_MASK |
300 (res << GPIO_GPCTR0_DBR_SHIFT);
301 }
302
303 writel(val, reg_base + GPIO_CONTROL(gpio));
304
305 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
306
307 return 0;
308}
309
310static int bcm_kona_gpio_set_config(struct gpio_chip *chip, unsigned gpio,
311 unsigned long config)
312{
313 u32 debounce;
314
315 if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
316 return -ENOTSUPP;
317
318 debounce = pinconf_to_config_argument(config);
319 return bcm_kona_gpio_set_debounce(chip, gpio, debounce);
320}
321
322static const struct gpio_chip template_chip = {
323 .label = "bcm-kona-gpio",
324 .owner = THIS_MODULE,
325 .request = bcm_kona_gpio_request,
326 .free = bcm_kona_gpio_free,
327 .get_direction = bcm_kona_gpio_get_dir,
328 .direction_input = bcm_kona_gpio_direction_input,
329 .get = bcm_kona_gpio_get,
330 .direction_output = bcm_kona_gpio_direction_output,
331 .set = bcm_kona_gpio_set,
332 .set_config = bcm_kona_gpio_set_config,
333 .to_irq = bcm_kona_gpio_to_irq,
334 .base = 0,
335};
336
337static void bcm_kona_gpio_irq_ack(struct irq_data *d)
338{
339 struct bcm_kona_gpio *kona_gpio;
340 void __iomem *reg_base;
341 unsigned gpio = d->hwirq;
342 int bank_id = GPIO_BANK(gpio);
343 int bit = GPIO_BIT(gpio);
344 u32 val;
345 unsigned long flags;
346
347 kona_gpio = irq_data_get_irq_chip_data(d);
348 reg_base = kona_gpio->reg_base;
349 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
350
351 val = readl(reg_base + GPIO_INT_STATUS(bank_id));
352 val |= BIT(bit);
353 writel(val, reg_base + GPIO_INT_STATUS(bank_id));
354
355 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
356}
357
358static void bcm_kona_gpio_irq_mask(struct irq_data *d)
359{
360 struct bcm_kona_gpio *kona_gpio;
361 void __iomem *reg_base;
362 unsigned gpio = d->hwirq;
363 int bank_id = GPIO_BANK(gpio);
364 int bit = GPIO_BIT(gpio);
365 u32 val;
366 unsigned long flags;
367
368 kona_gpio = irq_data_get_irq_chip_data(d);
369 reg_base = kona_gpio->reg_base;
370 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
371
372 val = readl(reg_base + GPIO_INT_MASK(bank_id));
373 val |= BIT(bit);
374 writel(val, reg_base + GPIO_INT_MASK(bank_id));
375 gpiochip_disable_irq(&kona_gpio->gpio_chip, gpio);
376
377 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
378}
379
380static void bcm_kona_gpio_irq_unmask(struct irq_data *d)
381{
382 struct bcm_kona_gpio *kona_gpio;
383 void __iomem *reg_base;
384 unsigned gpio = d->hwirq;
385 int bank_id = GPIO_BANK(gpio);
386 int bit = GPIO_BIT(gpio);
387 u32 val;
388 unsigned long flags;
389
390 kona_gpio = irq_data_get_irq_chip_data(d);
391 reg_base = kona_gpio->reg_base;
392 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
393
394 val = readl(reg_base + GPIO_INT_MSKCLR(bank_id));
395 val |= BIT(bit);
396 writel(val, reg_base + GPIO_INT_MSKCLR(bank_id));
397 gpiochip_enable_irq(&kona_gpio->gpio_chip, gpio);
398
399 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
400}
401
402static int bcm_kona_gpio_irq_set_type(struct irq_data *d, unsigned int type)
403{
404 struct bcm_kona_gpio *kona_gpio;
405 void __iomem *reg_base;
406 unsigned gpio = d->hwirq;
407 u32 lvl_type;
408 u32 val;
409 unsigned long flags;
410
411 kona_gpio = irq_data_get_irq_chip_data(d);
412 reg_base = kona_gpio->reg_base;
413 switch (type & IRQ_TYPE_SENSE_MASK) {
414 case IRQ_TYPE_EDGE_RISING:
415 lvl_type = GPIO_GPCTR0_ITR_CMD_RISING_EDGE;
416 break;
417
418 case IRQ_TYPE_EDGE_FALLING:
419 lvl_type = GPIO_GPCTR0_ITR_CMD_FALLING_EDGE;
420 break;
421
422 case IRQ_TYPE_EDGE_BOTH:
423 lvl_type = GPIO_GPCTR0_ITR_CMD_BOTH_EDGE;
424 break;
425
426 case IRQ_TYPE_LEVEL_HIGH:
427 case IRQ_TYPE_LEVEL_LOW:
428 /* BCM GPIO doesn't support level triggering */
429 default:
430 dev_err(kona_gpio->gpio_chip.parent,
431 "Invalid BCM GPIO irq type 0x%x\n", type);
432 return -EINVAL;
433 }
434
435 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
436
437 val = readl(reg_base + GPIO_CONTROL(gpio));
438 val &= ~GPIO_GPCTR0_ITR_MASK;
439 val |= lvl_type << GPIO_GPCTR0_ITR_SHIFT;
440 writel(val, reg_base + GPIO_CONTROL(gpio));
441
442 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
443
444 return 0;
445}
446
447static void bcm_kona_gpio_irq_handler(struct irq_desc *desc)
448{
449 void __iomem *reg_base;
450 int bit, bank_id;
451 unsigned long sta;
452 struct bcm_kona_gpio_bank *bank = irq_desc_get_handler_data(desc);
453 struct irq_chip *chip = irq_desc_get_chip(desc);
454
455 chained_irq_enter(chip, desc);
456
457 /*
458 * For bank interrupts, we can't use chip_data to store the kona_gpio
459 * pointer, since GIC needs it for its own purposes. Therefore, we get
460 * our pointer from the bank structure.
461 */
462 reg_base = bank->kona_gpio->reg_base;
463 bank_id = bank->id;
464
465 while ((sta = readl(reg_base + GPIO_INT_STATUS(bank_id)) &
466 (~(readl(reg_base + GPIO_INT_MASK(bank_id)))))) {
467 for_each_set_bit(bit, &sta, 32) {
468 int hwirq = GPIO_PER_BANK * bank_id + bit;
469 int child_irq =
470 irq_find_mapping(bank->kona_gpio->irq_domain,
471 hwirq);
472 /*
473 * Clear interrupt before handler is called so we don't
474 * miss any interrupt occurred during executing them.
475 */
476 writel(readl(reg_base + GPIO_INT_STATUS(bank_id)) |
477 BIT(bit), reg_base + GPIO_INT_STATUS(bank_id));
478 /* Invoke interrupt handler */
479 generic_handle_irq(child_irq);
480 }
481 }
482
483 chained_irq_exit(chip, desc);
484}
485
486static int bcm_kona_gpio_irq_reqres(struct irq_data *d)
487{
488 struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
489
490 return gpiochip_reqres_irq(&kona_gpio->gpio_chip, d->hwirq);
491}
492
493static void bcm_kona_gpio_irq_relres(struct irq_data *d)
494{
495 struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
496
497 gpiochip_relres_irq(&kona_gpio->gpio_chip, d->hwirq);
498}
499
500static struct irq_chip bcm_gpio_irq_chip = {
501 .name = "bcm-kona-gpio",
502 .irq_ack = bcm_kona_gpio_irq_ack,
503 .irq_mask = bcm_kona_gpio_irq_mask,
504 .irq_unmask = bcm_kona_gpio_irq_unmask,
505 .irq_set_type = bcm_kona_gpio_irq_set_type,
506 .irq_request_resources = bcm_kona_gpio_irq_reqres,
507 .irq_release_resources = bcm_kona_gpio_irq_relres,
508};
509
510static struct of_device_id const bcm_kona_gpio_of_match[] = {
511 { .compatible = "brcm,kona-gpio" },
512 {}
513};
514
515/*
516 * This lock class tells lockdep that GPIO irqs are in a different
517 * category than their parents, so it won't report false recursion.
518 */
519static struct lock_class_key gpio_lock_class;
520static struct lock_class_key gpio_request_class;
521
522static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq,
523 irq_hw_number_t hwirq)
524{
525 int ret;
526
527 ret = irq_set_chip_data(irq, d->host_data);
528 if (ret < 0)
529 return ret;
530 irq_set_lockdep_class(irq, &gpio_lock_class, &gpio_request_class);
531 irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq);
532 irq_set_noprobe(irq);
533
534 return 0;
535}
536
537static void bcm_kona_gpio_irq_unmap(struct irq_domain *d, unsigned int irq)
538{
539 irq_set_chip_and_handler(irq, NULL, NULL);
540 irq_set_chip_data(irq, NULL);
541}
542
543static const struct irq_domain_ops bcm_kona_irq_ops = {
544 .map = bcm_kona_gpio_irq_map,
545 .unmap = bcm_kona_gpio_irq_unmap,
546 .xlate = irq_domain_xlate_twocell,
547};
548
549static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio)
550{
551 void __iomem *reg_base;
552 int i;
553
554 reg_base = kona_gpio->reg_base;
555 /* disable interrupts and clear status */
556 for (i = 0; i < kona_gpio->num_bank; i++) {
557 /* Unlock the entire bank first */
558 bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE);
559 writel(0xffffffff, reg_base + GPIO_INT_MASK(i));
560 writel(0xffffffff, reg_base + GPIO_INT_STATUS(i));
561 /* Now re-lock the bank */
562 bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE);
563 }
564}
565
566static int bcm_kona_gpio_probe(struct platform_device *pdev)
567{
568 struct device *dev = &pdev->dev;
569 const struct of_device_id *match;
570 struct bcm_kona_gpio_bank *bank;
571 struct bcm_kona_gpio *kona_gpio;
572 struct gpio_chip *chip;
573 int ret;
574 int i;
575
576 match = of_match_device(bcm_kona_gpio_of_match, dev);
577 if (!match) {
578 dev_err(dev, "Failed to find gpio controller\n");
579 return -ENODEV;
580 }
581
582 kona_gpio = devm_kzalloc(dev, sizeof(*kona_gpio), GFP_KERNEL);
583 if (!kona_gpio)
584 return -ENOMEM;
585
586 kona_gpio->gpio_chip = template_chip;
587 chip = &kona_gpio->gpio_chip;
588 ret = platform_irq_count(pdev);
589 if (!ret) {
590 dev_err(dev, "Couldn't determine # GPIO banks\n");
591 return -ENOENT;
592 } else if (ret < 0) {
593 if (ret != -EPROBE_DEFER)
594 dev_err(dev, "Couldn't determine GPIO banks: (%pe)\n",
595 ERR_PTR(ret));
596 return ret;
597 }
598 kona_gpio->num_bank = ret;
599
600 if (kona_gpio->num_bank > GPIO_MAX_BANK_NUM) {
601 dev_err(dev, "Too many GPIO banks configured (max=%d)\n",
602 GPIO_MAX_BANK_NUM);
603 return -ENXIO;
604 }
605 kona_gpio->banks = devm_kcalloc(dev,
606 kona_gpio->num_bank,
607 sizeof(*kona_gpio->banks),
608 GFP_KERNEL);
609 if (!kona_gpio->banks)
610 return -ENOMEM;
611
612 kona_gpio->pdev = pdev;
613 platform_set_drvdata(pdev, kona_gpio);
614 chip->of_node = dev->of_node;
615 chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK;
616
617 kona_gpio->irq_domain = irq_domain_add_linear(dev->of_node,
618 chip->ngpio,
619 &bcm_kona_irq_ops,
620 kona_gpio);
621 if (!kona_gpio->irq_domain) {
622 dev_err(dev, "Couldn't allocate IRQ domain\n");
623 return -ENXIO;
624 }
625
626 kona_gpio->reg_base = devm_platform_ioremap_resource(pdev, 0);
627 if (IS_ERR(kona_gpio->reg_base)) {
628 ret = PTR_ERR(kona_gpio->reg_base);
629 goto err_irq_domain;
630 }
631
632 for (i = 0; i < kona_gpio->num_bank; i++) {
633 bank = &kona_gpio->banks[i];
634 bank->id = i;
635 bank->irq = platform_get_irq(pdev, i);
636 bank->kona_gpio = kona_gpio;
637 if (bank->irq < 0) {
638 dev_err(dev, "Couldn't get IRQ for bank %d", i);
639 ret = -ENOENT;
640 goto err_irq_domain;
641 }
642 }
643
644 dev_info(&pdev->dev, "Setting up Kona GPIO\n");
645
646 bcm_kona_gpio_reset(kona_gpio);
647
648 ret = devm_gpiochip_add_data(dev, chip, kona_gpio);
649 if (ret < 0) {
650 dev_err(dev, "Couldn't add GPIO chip -- %d\n", ret);
651 goto err_irq_domain;
652 }
653 for (i = 0; i < kona_gpio->num_bank; i++) {
654 bank = &kona_gpio->banks[i];
655 irq_set_chained_handler_and_data(bank->irq,
656 bcm_kona_gpio_irq_handler,
657 bank);
658 }
659
660 raw_spin_lock_init(&kona_gpio->lock);
661
662 return 0;
663
664err_irq_domain:
665 irq_domain_remove(kona_gpio->irq_domain);
666
667 return ret;
668}
669
670static struct platform_driver bcm_kona_gpio_driver = {
671 .driver = {
672 .name = "bcm-kona-gpio",
673 .of_match_table = bcm_kona_gpio_of_match,
674 },
675 .probe = bcm_kona_gpio_probe,
676};
677builtin_platform_driver(bcm_kona_gpio_driver);
1/*
2 * Broadcom Kona GPIO Driver
3 *
4 * Author: Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>
5 * Copyright (C) 2012-2014 Broadcom Corporation
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation version 2.
10 *
11 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
12 * kind, whether express or implied; without even the implied warranty
13 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 */
16
17#include <linux/bitops.h>
18#include <linux/err.h>
19#include <linux/io.h>
20#include <linux/gpio/driver.h>
21#include <linux/of_device.h>
22#include <linux/of_irq.h>
23#include <linux/init.h>
24#include <linux/irqdomain.h>
25#include <linux/irqchip/chained_irq.h>
26
27#define BCM_GPIO_PASSWD 0x00a5a501
28#define GPIO_PER_BANK 32
29#define GPIO_MAX_BANK_NUM 8
30
31#define GPIO_BANK(gpio) ((gpio) >> 5)
32#define GPIO_BIT(gpio) ((gpio) & (GPIO_PER_BANK - 1))
33
34/* There is a GPIO control register for each GPIO */
35#define GPIO_CONTROL(gpio) (0x00000100 + ((gpio) << 2))
36
37/* The remaining registers are per GPIO bank */
38#define GPIO_OUT_STATUS(bank) (0x00000000 + ((bank) << 2))
39#define GPIO_IN_STATUS(bank) (0x00000020 + ((bank) << 2))
40#define GPIO_OUT_SET(bank) (0x00000040 + ((bank) << 2))
41#define GPIO_OUT_CLEAR(bank) (0x00000060 + ((bank) << 2))
42#define GPIO_INT_STATUS(bank) (0x00000080 + ((bank) << 2))
43#define GPIO_INT_MASK(bank) (0x000000a0 + ((bank) << 2))
44#define GPIO_INT_MSKCLR(bank) (0x000000c0 + ((bank) << 2))
45#define GPIO_PWD_STATUS(bank) (0x00000500 + ((bank) << 2))
46
47#define GPIO_GPPWR_OFFSET 0x00000520
48
49#define GPIO_GPCTR0_DBR_SHIFT 5
50#define GPIO_GPCTR0_DBR_MASK 0x000001e0
51
52#define GPIO_GPCTR0_ITR_SHIFT 3
53#define GPIO_GPCTR0_ITR_MASK 0x00000018
54#define GPIO_GPCTR0_ITR_CMD_RISING_EDGE 0x00000001
55#define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE 0x00000002
56#define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE 0x00000003
57
58#define GPIO_GPCTR0_IOTR_MASK 0x00000001
59#define GPIO_GPCTR0_IOTR_CMD_0UTPUT 0x00000000
60#define GPIO_GPCTR0_IOTR_CMD_INPUT 0x00000001
61
62#define GPIO_GPCTR0_DB_ENABLE_MASK 0x00000100
63
64#define LOCK_CODE 0xffffffff
65#define UNLOCK_CODE 0x00000000
66
67struct bcm_kona_gpio {
68 void __iomem *reg_base;
69 int num_bank;
70 raw_spinlock_t lock;
71 struct gpio_chip gpio_chip;
72 struct irq_domain *irq_domain;
73 struct bcm_kona_gpio_bank *banks;
74 struct platform_device *pdev;
75};
76
77struct bcm_kona_gpio_bank {
78 int id;
79 int irq;
80 /* Used in the interrupt handler */
81 struct bcm_kona_gpio *kona_gpio;
82};
83
84static inline void bcm_kona_gpio_write_lock_regs(void __iomem *reg_base,
85 int bank_id, u32 lockcode)
86{
87 writel(BCM_GPIO_PASSWD, reg_base + GPIO_GPPWR_OFFSET);
88 writel(lockcode, reg_base + GPIO_PWD_STATUS(bank_id));
89}
90
91static void bcm_kona_gpio_lock_gpio(struct bcm_kona_gpio *kona_gpio,
92 unsigned gpio)
93{
94 u32 val;
95 unsigned long flags;
96 int bank_id = GPIO_BANK(gpio);
97
98 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
99
100 val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
101 val |= BIT(gpio);
102 bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
103
104 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
105}
106
107static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
108 unsigned gpio)
109{
110 u32 val;
111 unsigned long flags;
112 int bank_id = GPIO_BANK(gpio);
113
114 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
115
116 val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
117 val &= ~BIT(gpio);
118 bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
119
120 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
121}
122
123static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
124{
125 struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
126 void __iomem *reg_base = kona_gpio->reg_base;
127 u32 val;
128
129 val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
130 return !!val;
131}
132
133static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
134{
135 struct bcm_kona_gpio *kona_gpio;
136 void __iomem *reg_base;
137 int bank_id = GPIO_BANK(gpio);
138 int bit = GPIO_BIT(gpio);
139 u32 val, reg_offset;
140 unsigned long flags;
141
142 kona_gpio = gpiochip_get_data(chip);
143 reg_base = kona_gpio->reg_base;
144 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
145
146 /* this function only applies to output pin */
147 if (bcm_kona_gpio_get_dir(chip, gpio) == 1)
148 goto out;
149
150 reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
151
152 val = readl(reg_base + reg_offset);
153 val |= BIT(bit);
154 writel(val, reg_base + reg_offset);
155
156out:
157 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
158}
159
160static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
161{
162 struct bcm_kona_gpio *kona_gpio;
163 void __iomem *reg_base;
164 int bank_id = GPIO_BANK(gpio);
165 int bit = GPIO_BIT(gpio);
166 u32 val, reg_offset;
167 unsigned long flags;
168
169 kona_gpio = gpiochip_get_data(chip);
170 reg_base = kona_gpio->reg_base;
171 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
172
173 if (bcm_kona_gpio_get_dir(chip, gpio) == 1)
174 reg_offset = GPIO_IN_STATUS(bank_id);
175 else
176 reg_offset = GPIO_OUT_STATUS(bank_id);
177
178 /* read the GPIO bank status */
179 val = readl(reg_base + reg_offset);
180
181 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
182
183 /* return the specified bit status */
184 return !!(val & BIT(bit));
185}
186
187static int bcm_kona_gpio_request(struct gpio_chip *chip, unsigned gpio)
188{
189 struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
190
191 bcm_kona_gpio_unlock_gpio(kona_gpio, gpio);
192 return 0;
193}
194
195static void bcm_kona_gpio_free(struct gpio_chip *chip, unsigned gpio)
196{
197 struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
198
199 bcm_kona_gpio_lock_gpio(kona_gpio, gpio);
200}
201
202static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
203{
204 struct bcm_kona_gpio *kona_gpio;
205 void __iomem *reg_base;
206 u32 val;
207 unsigned long flags;
208
209 kona_gpio = gpiochip_get_data(chip);
210 reg_base = kona_gpio->reg_base;
211 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
212
213 val = readl(reg_base + GPIO_CONTROL(gpio));
214 val &= ~GPIO_GPCTR0_IOTR_MASK;
215 val |= GPIO_GPCTR0_IOTR_CMD_INPUT;
216 writel(val, reg_base + GPIO_CONTROL(gpio));
217
218 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
219
220 return 0;
221}
222
223static int bcm_kona_gpio_direction_output(struct gpio_chip *chip,
224 unsigned gpio, int value)
225{
226 struct bcm_kona_gpio *kona_gpio;
227 void __iomem *reg_base;
228 int bank_id = GPIO_BANK(gpio);
229 int bit = GPIO_BIT(gpio);
230 u32 val, reg_offset;
231 unsigned long flags;
232
233 kona_gpio = gpiochip_get_data(chip);
234 reg_base = kona_gpio->reg_base;
235 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
236
237 val = readl(reg_base + GPIO_CONTROL(gpio));
238 val &= ~GPIO_GPCTR0_IOTR_MASK;
239 val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT;
240 writel(val, reg_base + GPIO_CONTROL(gpio));
241 reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
242
243 val = readl(reg_base + reg_offset);
244 val |= BIT(bit);
245 writel(val, reg_base + reg_offset);
246
247 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
248
249 return 0;
250}
251
252static int bcm_kona_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
253{
254 struct bcm_kona_gpio *kona_gpio;
255
256 kona_gpio = gpiochip_get_data(chip);
257 if (gpio >= kona_gpio->gpio_chip.ngpio)
258 return -ENXIO;
259 return irq_create_mapping(kona_gpio->irq_domain, gpio);
260}
261
262static int bcm_kona_gpio_set_debounce(struct gpio_chip *chip, unsigned gpio,
263 unsigned debounce)
264{
265 struct bcm_kona_gpio *kona_gpio;
266 void __iomem *reg_base;
267 u32 val, res;
268 unsigned long flags;
269
270 kona_gpio = gpiochip_get_data(chip);
271 reg_base = kona_gpio->reg_base;
272 /* debounce must be 1-128ms (or 0) */
273 if ((debounce > 0 && debounce < 1000) || debounce > 128000) {
274 dev_err(chip->parent, "Debounce value %u not in range\n",
275 debounce);
276 return -EINVAL;
277 }
278
279 /* calculate debounce bit value */
280 if (debounce != 0) {
281 /* Convert to ms */
282 debounce /= 1000;
283 /* find the MSB */
284 res = fls(debounce) - 1;
285 /* Check if MSB-1 is set (round up or down) */
286 if (res > 0 && (debounce & BIT(res - 1)))
287 res++;
288 }
289
290 /* spin lock for read-modify-write of the GPIO register */
291 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
292
293 val = readl(reg_base + GPIO_CONTROL(gpio));
294 val &= ~GPIO_GPCTR0_DBR_MASK;
295
296 if (debounce == 0) {
297 /* disable debounce */
298 val &= ~GPIO_GPCTR0_DB_ENABLE_MASK;
299 } else {
300 val |= GPIO_GPCTR0_DB_ENABLE_MASK |
301 (res << GPIO_GPCTR0_DBR_SHIFT);
302 }
303
304 writel(val, reg_base + GPIO_CONTROL(gpio));
305
306 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
307
308 return 0;
309}
310
311static int bcm_kona_gpio_set_config(struct gpio_chip *chip, unsigned gpio,
312 unsigned long config)
313{
314 u32 debounce;
315
316 if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
317 return -ENOTSUPP;
318
319 debounce = pinconf_to_config_argument(config);
320 return bcm_kona_gpio_set_debounce(chip, gpio, debounce);
321}
322
323static const struct gpio_chip template_chip = {
324 .label = "bcm-kona-gpio",
325 .owner = THIS_MODULE,
326 .request = bcm_kona_gpio_request,
327 .free = bcm_kona_gpio_free,
328 .get_direction = bcm_kona_gpio_get_dir,
329 .direction_input = bcm_kona_gpio_direction_input,
330 .get = bcm_kona_gpio_get,
331 .direction_output = bcm_kona_gpio_direction_output,
332 .set = bcm_kona_gpio_set,
333 .set_config = bcm_kona_gpio_set_config,
334 .to_irq = bcm_kona_gpio_to_irq,
335 .base = 0,
336};
337
338static void bcm_kona_gpio_irq_ack(struct irq_data *d)
339{
340 struct bcm_kona_gpio *kona_gpio;
341 void __iomem *reg_base;
342 unsigned gpio = d->hwirq;
343 int bank_id = GPIO_BANK(gpio);
344 int bit = GPIO_BIT(gpio);
345 u32 val;
346 unsigned long flags;
347
348 kona_gpio = irq_data_get_irq_chip_data(d);
349 reg_base = kona_gpio->reg_base;
350 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
351
352 val = readl(reg_base + GPIO_INT_STATUS(bank_id));
353 val |= BIT(bit);
354 writel(val, reg_base + GPIO_INT_STATUS(bank_id));
355
356 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
357}
358
359static void bcm_kona_gpio_irq_mask(struct irq_data *d)
360{
361 struct bcm_kona_gpio *kona_gpio;
362 void __iomem *reg_base;
363 unsigned gpio = d->hwirq;
364 int bank_id = GPIO_BANK(gpio);
365 int bit = GPIO_BIT(gpio);
366 u32 val;
367 unsigned long flags;
368
369 kona_gpio = irq_data_get_irq_chip_data(d);
370 reg_base = kona_gpio->reg_base;
371 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
372
373 val = readl(reg_base + GPIO_INT_MASK(bank_id));
374 val |= BIT(bit);
375 writel(val, reg_base + GPIO_INT_MASK(bank_id));
376
377 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
378}
379
380static void bcm_kona_gpio_irq_unmask(struct irq_data *d)
381{
382 struct bcm_kona_gpio *kona_gpio;
383 void __iomem *reg_base;
384 unsigned gpio = d->hwirq;
385 int bank_id = GPIO_BANK(gpio);
386 int bit = GPIO_BIT(gpio);
387 u32 val;
388 unsigned long flags;
389
390 kona_gpio = irq_data_get_irq_chip_data(d);
391 reg_base = kona_gpio->reg_base;
392 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
393
394 val = readl(reg_base + GPIO_INT_MSKCLR(bank_id));
395 val |= BIT(bit);
396 writel(val, reg_base + GPIO_INT_MSKCLR(bank_id));
397
398 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
399}
400
401static int bcm_kona_gpio_irq_set_type(struct irq_data *d, unsigned int type)
402{
403 struct bcm_kona_gpio *kona_gpio;
404 void __iomem *reg_base;
405 unsigned gpio = d->hwirq;
406 u32 lvl_type;
407 u32 val;
408 unsigned long flags;
409
410 kona_gpio = irq_data_get_irq_chip_data(d);
411 reg_base = kona_gpio->reg_base;
412 switch (type & IRQ_TYPE_SENSE_MASK) {
413 case IRQ_TYPE_EDGE_RISING:
414 lvl_type = GPIO_GPCTR0_ITR_CMD_RISING_EDGE;
415 break;
416
417 case IRQ_TYPE_EDGE_FALLING:
418 lvl_type = GPIO_GPCTR0_ITR_CMD_FALLING_EDGE;
419 break;
420
421 case IRQ_TYPE_EDGE_BOTH:
422 lvl_type = GPIO_GPCTR0_ITR_CMD_BOTH_EDGE;
423 break;
424
425 case IRQ_TYPE_LEVEL_HIGH:
426 case IRQ_TYPE_LEVEL_LOW:
427 /* BCM GPIO doesn't support level triggering */
428 default:
429 dev_err(kona_gpio->gpio_chip.parent,
430 "Invalid BCM GPIO irq type 0x%x\n", type);
431 return -EINVAL;
432 }
433
434 raw_spin_lock_irqsave(&kona_gpio->lock, flags);
435
436 val = readl(reg_base + GPIO_CONTROL(gpio));
437 val &= ~GPIO_GPCTR0_ITR_MASK;
438 val |= lvl_type << GPIO_GPCTR0_ITR_SHIFT;
439 writel(val, reg_base + GPIO_CONTROL(gpio));
440
441 raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
442
443 return 0;
444}
445
446static void bcm_kona_gpio_irq_handler(struct irq_desc *desc)
447{
448 void __iomem *reg_base;
449 int bit, bank_id;
450 unsigned long sta;
451 struct bcm_kona_gpio_bank *bank = irq_desc_get_handler_data(desc);
452 struct irq_chip *chip = irq_desc_get_chip(desc);
453
454 chained_irq_enter(chip, desc);
455
456 /*
457 * For bank interrupts, we can't use chip_data to store the kona_gpio
458 * pointer, since GIC needs it for its own purposes. Therefore, we get
459 * our pointer from the bank structure.
460 */
461 reg_base = bank->kona_gpio->reg_base;
462 bank_id = bank->id;
463
464 while ((sta = readl(reg_base + GPIO_INT_STATUS(bank_id)) &
465 (~(readl(reg_base + GPIO_INT_MASK(bank_id)))))) {
466 for_each_set_bit(bit, &sta, 32) {
467 int hwirq = GPIO_PER_BANK * bank_id + bit;
468 int child_irq =
469 irq_find_mapping(bank->kona_gpio->irq_domain,
470 hwirq);
471 /*
472 * Clear interrupt before handler is called so we don't
473 * miss any interrupt occurred during executing them.
474 */
475 writel(readl(reg_base + GPIO_INT_STATUS(bank_id)) |
476 BIT(bit), reg_base + GPIO_INT_STATUS(bank_id));
477 /* Invoke interrupt handler */
478 generic_handle_irq(child_irq);
479 }
480 }
481
482 chained_irq_exit(chip, desc);
483}
484
485static int bcm_kona_gpio_irq_reqres(struct irq_data *d)
486{
487 struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
488
489 if (gpiochip_lock_as_irq(&kona_gpio->gpio_chip, d->hwirq)) {
490 dev_err(kona_gpio->gpio_chip.parent,
491 "unable to lock HW IRQ %lu for IRQ\n",
492 d->hwirq);
493 return -EINVAL;
494 }
495 return 0;
496}
497
498static void bcm_kona_gpio_irq_relres(struct irq_data *d)
499{
500 struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
501
502 gpiochip_unlock_as_irq(&kona_gpio->gpio_chip, d->hwirq);
503}
504
505static struct irq_chip bcm_gpio_irq_chip = {
506 .name = "bcm-kona-gpio",
507 .irq_ack = bcm_kona_gpio_irq_ack,
508 .irq_mask = bcm_kona_gpio_irq_mask,
509 .irq_unmask = bcm_kona_gpio_irq_unmask,
510 .irq_set_type = bcm_kona_gpio_irq_set_type,
511 .irq_request_resources = bcm_kona_gpio_irq_reqres,
512 .irq_release_resources = bcm_kona_gpio_irq_relres,
513};
514
515static struct of_device_id const bcm_kona_gpio_of_match[] = {
516 { .compatible = "brcm,kona-gpio" },
517 {}
518};
519
520/*
521 * This lock class tells lockdep that GPIO irqs are in a different
522 * category than their parents, so it won't report false recursion.
523 */
524static struct lock_class_key gpio_lock_class;
525static struct lock_class_key gpio_request_class;
526
527static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq,
528 irq_hw_number_t hwirq)
529{
530 int ret;
531
532 ret = irq_set_chip_data(irq, d->host_data);
533 if (ret < 0)
534 return ret;
535 irq_set_lockdep_class(irq, &gpio_lock_class, &gpio_request_class);
536 irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq);
537 irq_set_noprobe(irq);
538
539 return 0;
540}
541
542static void bcm_kona_gpio_irq_unmap(struct irq_domain *d, unsigned int irq)
543{
544 irq_set_chip_and_handler(irq, NULL, NULL);
545 irq_set_chip_data(irq, NULL);
546}
547
548static const struct irq_domain_ops bcm_kona_irq_ops = {
549 .map = bcm_kona_gpio_irq_map,
550 .unmap = bcm_kona_gpio_irq_unmap,
551 .xlate = irq_domain_xlate_twocell,
552};
553
554static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio)
555{
556 void __iomem *reg_base;
557 int i;
558
559 reg_base = kona_gpio->reg_base;
560 /* disable interrupts and clear status */
561 for (i = 0; i < kona_gpio->num_bank; i++) {
562 /* Unlock the entire bank first */
563 bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE);
564 writel(0xffffffff, reg_base + GPIO_INT_MASK(i));
565 writel(0xffffffff, reg_base + GPIO_INT_STATUS(i));
566 /* Now re-lock the bank */
567 bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE);
568 }
569}
570
571static int bcm_kona_gpio_probe(struct platform_device *pdev)
572{
573 struct device *dev = &pdev->dev;
574 const struct of_device_id *match;
575 struct resource *res;
576 struct bcm_kona_gpio_bank *bank;
577 struct bcm_kona_gpio *kona_gpio;
578 struct gpio_chip *chip;
579 int ret;
580 int i;
581
582 match = of_match_device(bcm_kona_gpio_of_match, dev);
583 if (!match) {
584 dev_err(dev, "Failed to find gpio controller\n");
585 return -ENODEV;
586 }
587
588 kona_gpio = devm_kzalloc(dev, sizeof(*kona_gpio), GFP_KERNEL);
589 if (!kona_gpio)
590 return -ENOMEM;
591
592 kona_gpio->gpio_chip = template_chip;
593 chip = &kona_gpio->gpio_chip;
594 kona_gpio->num_bank = of_irq_count(dev->of_node);
595 if (kona_gpio->num_bank == 0) {
596 dev_err(dev, "Couldn't determine # GPIO banks\n");
597 return -ENOENT;
598 }
599 if (kona_gpio->num_bank > GPIO_MAX_BANK_NUM) {
600 dev_err(dev, "Too many GPIO banks configured (max=%d)\n",
601 GPIO_MAX_BANK_NUM);
602 return -ENXIO;
603 }
604 kona_gpio->banks = devm_kzalloc(dev,
605 kona_gpio->num_bank *
606 sizeof(*kona_gpio->banks), GFP_KERNEL);
607 if (!kona_gpio->banks)
608 return -ENOMEM;
609
610 kona_gpio->pdev = pdev;
611 platform_set_drvdata(pdev, kona_gpio);
612 chip->of_node = dev->of_node;
613 chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK;
614
615 kona_gpio->irq_domain = irq_domain_add_linear(dev->of_node,
616 chip->ngpio,
617 &bcm_kona_irq_ops,
618 kona_gpio);
619 if (!kona_gpio->irq_domain) {
620 dev_err(dev, "Couldn't allocate IRQ domain\n");
621 return -ENXIO;
622 }
623
624 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
625 kona_gpio->reg_base = devm_ioremap_resource(dev, res);
626 if (IS_ERR(kona_gpio->reg_base)) {
627 ret = -ENXIO;
628 goto err_irq_domain;
629 }
630
631 for (i = 0; i < kona_gpio->num_bank; i++) {
632 bank = &kona_gpio->banks[i];
633 bank->id = i;
634 bank->irq = platform_get_irq(pdev, i);
635 bank->kona_gpio = kona_gpio;
636 if (bank->irq < 0) {
637 dev_err(dev, "Couldn't get IRQ for bank %d", i);
638 ret = -ENOENT;
639 goto err_irq_domain;
640 }
641 }
642
643 dev_info(&pdev->dev, "Setting up Kona GPIO\n");
644
645 bcm_kona_gpio_reset(kona_gpio);
646
647 ret = devm_gpiochip_add_data(dev, chip, kona_gpio);
648 if (ret < 0) {
649 dev_err(dev, "Couldn't add GPIO chip -- %d\n", ret);
650 goto err_irq_domain;
651 }
652 for (i = 0; i < kona_gpio->num_bank; i++) {
653 bank = &kona_gpio->banks[i];
654 irq_set_chained_handler_and_data(bank->irq,
655 bcm_kona_gpio_irq_handler,
656 bank);
657 }
658
659 raw_spin_lock_init(&kona_gpio->lock);
660
661 return 0;
662
663err_irq_domain:
664 irq_domain_remove(kona_gpio->irq_domain);
665
666 return ret;
667}
668
669static struct platform_driver bcm_kona_gpio_driver = {
670 .driver = {
671 .name = "bcm-kona-gpio",
672 .of_match_table = bcm_kona_gpio_of_match,
673 },
674 .probe = bcm_kona_gpio_probe,
675};
676builtin_platform_driver(bcm_kona_gpio_driver);