Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
4 *
5 * Copyright (c) 2017-2018 Hans de Goede <hdegoede@redhat.com>
6 * Copyright (C) 2015 Intel Corporation
7 * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
8 */
9
10#include <linux/acpi.h>
11#include <linux/module.h>
12#include <linux/kernel.h>
13#include <linux/io.h>
14#include <linux/slab.h>
15#include <linux/interrupt.h>
16#include <linux/platform_device.h>
17#include <linux/property.h>
18#include <linux/notifier.h>
19#include <linux/extcon-provider.h>
20#include <linux/regmap.h>
21#include <linux/mfd/axp20x.h>
22#include <linux/usb/role.h>
23#include <linux/workqueue.h>
24
25#include <asm/cpu_device_id.h>
26#include <asm/intel-family.h>
27
28/* Power source status register */
29#define PS_STAT_VBUS_TRIGGER BIT(0)
30#define PS_STAT_BAT_CHRG_DIR BIT(2)
31#define PS_STAT_VBUS_ABOVE_VHOLD BIT(3)
32#define PS_STAT_VBUS_VALID BIT(4)
33#define PS_STAT_VBUS_PRESENT BIT(5)
34
35/* BC module global register */
36#define BC_GLOBAL_RUN BIT(0)
37#define BC_GLOBAL_DET_STAT BIT(2)
38#define BC_GLOBAL_DBP_TOUT BIT(3)
39#define BC_GLOBAL_VLGC_COM_SEL BIT(4)
40#define BC_GLOBAL_DCD_TOUT_MASK (BIT(6)|BIT(5))
41#define BC_GLOBAL_DCD_TOUT_300MS 0
42#define BC_GLOBAL_DCD_TOUT_100MS 1
43#define BC_GLOBAL_DCD_TOUT_500MS 2
44#define BC_GLOBAL_DCD_TOUT_900MS 3
45#define BC_GLOBAL_DCD_DET_SEL BIT(7)
46
47/* BC module vbus control and status register */
48#define VBUS_CNTL_DPDM_PD_EN BIT(4)
49#define VBUS_CNTL_DPDM_FD_EN BIT(5)
50#define VBUS_CNTL_FIRST_PO_STAT BIT(6)
51
52/* BC USB status register */
53#define USB_STAT_BUS_STAT_MASK (BIT(3)|BIT(2)|BIT(1)|BIT(0))
54#define USB_STAT_BUS_STAT_SHIFT 0
55#define USB_STAT_BUS_STAT_ATHD 0
56#define USB_STAT_BUS_STAT_CONN 1
57#define USB_STAT_BUS_STAT_SUSP 2
58#define USB_STAT_BUS_STAT_CONF 3
59#define USB_STAT_USB_SS_MODE BIT(4)
60#define USB_STAT_DEAD_BAT_DET BIT(6)
61#define USB_STAT_DBP_UNCFG BIT(7)
62
63/* BC detect status register */
64#define DET_STAT_MASK (BIT(7)|BIT(6)|BIT(5))
65#define DET_STAT_SHIFT 5
66#define DET_STAT_SDP 1
67#define DET_STAT_CDP 2
68#define DET_STAT_DCP 3
69
70enum axp288_extcon_reg {
71 AXP288_PS_STAT_REG = 0x00,
72 AXP288_PS_BOOT_REASON_REG = 0x02,
73 AXP288_BC_GLOBAL_REG = 0x2c,
74 AXP288_BC_VBUS_CNTL_REG = 0x2d,
75 AXP288_BC_USB_STAT_REG = 0x2e,
76 AXP288_BC_DET_STAT_REG = 0x2f,
77};
78
79enum axp288_extcon_irq {
80 VBUS_FALLING_IRQ = 0,
81 VBUS_RISING_IRQ,
82 MV_CHNG_IRQ,
83 BC_USB_CHNG_IRQ,
84 EXTCON_IRQ_END,
85};
86
87static const unsigned int axp288_extcon_cables[] = {
88 EXTCON_CHG_USB_SDP,
89 EXTCON_CHG_USB_CDP,
90 EXTCON_CHG_USB_DCP,
91 EXTCON_USB,
92 EXTCON_NONE,
93};
94
95struct axp288_extcon_info {
96 struct device *dev;
97 struct regmap *regmap;
98 struct regmap_irq_chip_data *regmap_irqc;
99 struct usb_role_switch *role_sw;
100 struct work_struct role_work;
101 int irq[EXTCON_IRQ_END];
102 struct extcon_dev *edev;
103 struct extcon_dev *id_extcon;
104 struct notifier_block id_nb;
105 unsigned int previous_cable;
106 bool vbus_attach;
107};
108
109static const struct x86_cpu_id cherry_trail_cpu_ids[] = {
110 X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT, NULL),
111 {}
112};
113
114/* Power up/down reason string array */
115static const char * const axp288_pwr_up_down_info[] = {
116 "Last wake caused by user pressing the power button",
117 "Last wake caused by a charger insertion",
118 "Last wake caused by a battery insertion",
119 "Last wake caused by SOC initiated global reset",
120 "Last wake caused by cold reset",
121 "Last shutdown caused by PMIC UVLO threshold",
122 "Last shutdown caused by SOC initiated cold off",
123 "Last shutdown caused by user pressing the power button",
124};
125
126/*
127 * Decode and log the given "reset source indicator" (rsi)
128 * register and then clear it.
129 */
130static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
131{
132 unsigned int val, i, clear_mask = 0;
133 unsigned long bits;
134 int ret;
135
136 ret = regmap_read(info->regmap, AXP288_PS_BOOT_REASON_REG, &val);
137 if (ret < 0) {
138 dev_err(info->dev, "failed to read reset source indicator\n");
139 return;
140 }
141
142 bits = val & GENMASK(ARRAY_SIZE(axp288_pwr_up_down_info) - 1, 0);
143 for_each_set_bit(i, &bits, ARRAY_SIZE(axp288_pwr_up_down_info))
144 dev_dbg(info->dev, "%s\n", axp288_pwr_up_down_info[i]);
145 clear_mask = bits;
146
147 /* Clear the register value for next reboot (write 1 to clear bit) */
148 regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
149}
150
151/*
152 * The below code to control the USB role-switch on devices with an AXP288
153 * may seem out of place, but there are 2 reasons why this is the best place
154 * to control the USB role-switch on such devices:
155 * 1) On many devices the USB role is controlled by AML code, but the AML code
156 * only switches between the host and none roles, because of Windows not
157 * really using device mode. To make device mode work we need to toggle
158 * between the none/device roles based on Vbus presence, and this driver
159 * gets interrupts on Vbus insertion / removal.
160 * 2) In order for our BC1.2 charger detection to work properly the role
161 * mux must be properly set to device mode before we do the detection.
162 */
163
164/* Returns the id-pin value, note pulled low / false == host-mode */
165static bool axp288_get_id_pin(struct axp288_extcon_info *info)
166{
167 enum usb_role role;
168
169 if (info->id_extcon)
170 return extcon_get_state(info->id_extcon, EXTCON_USB_HOST) <= 0;
171
172 /* We cannot access the id-pin, see what mode the AML code has set */
173 role = usb_role_switch_get_role(info->role_sw);
174 return role != USB_ROLE_HOST;
175}
176
177static void axp288_usb_role_work(struct work_struct *work)
178{
179 struct axp288_extcon_info *info =
180 container_of(work, struct axp288_extcon_info, role_work);
181 enum usb_role role;
182 bool id_pin;
183 int ret;
184
185 id_pin = axp288_get_id_pin(info);
186 if (!id_pin)
187 role = USB_ROLE_HOST;
188 else if (info->vbus_attach)
189 role = USB_ROLE_DEVICE;
190 else
191 role = USB_ROLE_NONE;
192
193 ret = usb_role_switch_set_role(info->role_sw, role);
194 if (ret)
195 dev_err(info->dev, "failed to set role: %d\n", ret);
196}
197
198static bool axp288_get_vbus_attach(struct axp288_extcon_info *info)
199{
200 int ret, pwr_stat;
201
202 ret = regmap_read(info->regmap, AXP288_PS_STAT_REG, &pwr_stat);
203 if (ret < 0) {
204 dev_err(info->dev, "failed to read vbus status\n");
205 return false;
206 }
207
208 return !!(pwr_stat & PS_STAT_VBUS_VALID);
209}
210
211static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
212{
213 int ret, stat, cfg;
214 u8 chrg_type;
215 unsigned int cable = info->previous_cable;
216 bool vbus_attach = false;
217
218 vbus_attach = axp288_get_vbus_attach(info);
219 if (!vbus_attach)
220 goto no_vbus;
221
222 /* Check charger detection completion status */
223 ret = regmap_read(info->regmap, AXP288_BC_GLOBAL_REG, &cfg);
224 if (ret < 0)
225 goto dev_det_ret;
226 if (cfg & BC_GLOBAL_DET_STAT) {
227 dev_dbg(info->dev, "can't complete the charger detection\n");
228 goto dev_det_ret;
229 }
230
231 ret = regmap_read(info->regmap, AXP288_BC_DET_STAT_REG, &stat);
232 if (ret < 0)
233 goto dev_det_ret;
234
235 chrg_type = (stat & DET_STAT_MASK) >> DET_STAT_SHIFT;
236
237 switch (chrg_type) {
238 case DET_STAT_SDP:
239 dev_dbg(info->dev, "sdp cable is connected\n");
240 cable = EXTCON_CHG_USB_SDP;
241 break;
242 case DET_STAT_CDP:
243 dev_dbg(info->dev, "cdp cable is connected\n");
244 cable = EXTCON_CHG_USB_CDP;
245 break;
246 case DET_STAT_DCP:
247 dev_dbg(info->dev, "dcp cable is connected\n");
248 cable = EXTCON_CHG_USB_DCP;
249 break;
250 default:
251 dev_warn(info->dev, "unknown (reserved) bc detect result\n");
252 cable = EXTCON_CHG_USB_SDP;
253 }
254
255no_vbus:
256 extcon_set_state_sync(info->edev, info->previous_cable, false);
257 if (info->previous_cable == EXTCON_CHG_USB_SDP)
258 extcon_set_state_sync(info->edev, EXTCON_USB, false);
259
260 if (vbus_attach) {
261 extcon_set_state_sync(info->edev, cable, vbus_attach);
262 if (cable == EXTCON_CHG_USB_SDP)
263 extcon_set_state_sync(info->edev, EXTCON_USB,
264 vbus_attach);
265
266 info->previous_cable = cable;
267 }
268
269 if (info->role_sw && info->vbus_attach != vbus_attach) {
270 info->vbus_attach = vbus_attach;
271 /* Setting the role can take a while */
272 queue_work(system_long_wq, &info->role_work);
273 }
274
275 return 0;
276
277dev_det_ret:
278 if (ret < 0)
279 dev_err(info->dev, "failed to detect BC Mod\n");
280
281 return ret;
282}
283
284static int axp288_extcon_id_evt(struct notifier_block *nb,
285 unsigned long event, void *param)
286{
287 struct axp288_extcon_info *info =
288 container_of(nb, struct axp288_extcon_info, id_nb);
289
290 /* We may not sleep and setting the role can take a while */
291 queue_work(system_long_wq, &info->role_work);
292
293 return NOTIFY_OK;
294}
295
296static irqreturn_t axp288_extcon_isr(int irq, void *data)
297{
298 struct axp288_extcon_info *info = data;
299 int ret;
300
301 ret = axp288_handle_chrg_det_event(info);
302 if (ret < 0)
303 dev_err(info->dev, "failed to handle the interrupt\n");
304
305 return IRQ_HANDLED;
306}
307
308static void axp288_extcon_enable(struct axp288_extcon_info *info)
309{
310 regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
311 BC_GLOBAL_RUN, 0);
312 /* Enable the charger detection logic */
313 regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
314 BC_GLOBAL_RUN, BC_GLOBAL_RUN);
315}
316
317static void axp288_put_role_sw(void *data)
318{
319 struct axp288_extcon_info *info = data;
320
321 cancel_work_sync(&info->role_work);
322 usb_role_switch_put(info->role_sw);
323}
324
325static int axp288_extcon_find_role_sw(struct axp288_extcon_info *info)
326{
327 const struct software_node *swnode;
328 struct fwnode_handle *fwnode;
329
330 if (!x86_match_cpu(cherry_trail_cpu_ids))
331 return 0;
332
333 swnode = software_node_find_by_name(NULL, "intel-xhci-usb-sw");
334 if (!swnode)
335 return -EPROBE_DEFER;
336
337 fwnode = software_node_fwnode(swnode);
338 info->role_sw = usb_role_switch_find_by_fwnode(fwnode);
339 fwnode_handle_put(fwnode);
340
341 return info->role_sw ? 0 : -EPROBE_DEFER;
342}
343
344static int axp288_extcon_probe(struct platform_device *pdev)
345{
346 struct axp288_extcon_info *info;
347 struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
348 struct device *dev = &pdev->dev;
349 struct acpi_device *adev;
350 int ret, i, pirq;
351
352 info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
353 if (!info)
354 return -ENOMEM;
355
356 info->dev = &pdev->dev;
357 info->regmap = axp20x->regmap;
358 info->regmap_irqc = axp20x->regmap_irqc;
359 info->previous_cable = EXTCON_NONE;
360 INIT_WORK(&info->role_work, axp288_usb_role_work);
361 info->id_nb.notifier_call = axp288_extcon_id_evt;
362
363 platform_set_drvdata(pdev, info);
364
365 ret = axp288_extcon_find_role_sw(info);
366 if (ret)
367 return ret;
368
369 if (info->role_sw) {
370 ret = devm_add_action_or_reset(dev, axp288_put_role_sw, info);
371 if (ret)
372 return ret;
373
374 adev = acpi_dev_get_first_match_dev("INT3496", NULL, -1);
375 if (adev) {
376 info->id_extcon = extcon_get_extcon_dev(acpi_dev_name(adev));
377 put_device(&adev->dev);
378 if (!info->id_extcon)
379 return -EPROBE_DEFER;
380
381 dev_info(dev, "controlling USB role\n");
382 } else {
383 dev_info(dev, "controlling USB role based on Vbus presence\n");
384 }
385 }
386
387 info->vbus_attach = axp288_get_vbus_attach(info);
388
389 axp288_extcon_log_rsi(info);
390
391 /* Initialize extcon device */
392 info->edev = devm_extcon_dev_allocate(&pdev->dev,
393 axp288_extcon_cables);
394 if (IS_ERR(info->edev)) {
395 dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
396 return PTR_ERR(info->edev);
397 }
398
399 /* Register extcon device */
400 ret = devm_extcon_dev_register(&pdev->dev, info->edev);
401 if (ret) {
402 dev_err(&pdev->dev, "failed to register extcon device\n");
403 return ret;
404 }
405
406 for (i = 0; i < EXTCON_IRQ_END; i++) {
407 pirq = platform_get_irq(pdev, i);
408 if (pirq < 0)
409 return pirq;
410
411 info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
412 if (info->irq[i] < 0) {
413 dev_err(&pdev->dev,
414 "failed to get virtual interrupt=%d\n", pirq);
415 ret = info->irq[i];
416 return ret;
417 }
418
419 ret = devm_request_threaded_irq(&pdev->dev, info->irq[i],
420 NULL, axp288_extcon_isr,
421 IRQF_ONESHOT | IRQF_NO_SUSPEND,
422 pdev->name, info);
423 if (ret) {
424 dev_err(&pdev->dev, "failed to request interrupt=%d\n",
425 info->irq[i]);
426 return ret;
427 }
428 }
429
430 if (info->id_extcon) {
431 ret = devm_extcon_register_notifier_all(dev, info->id_extcon,
432 &info->id_nb);
433 if (ret)
434 return ret;
435 }
436
437 /* Make sure the role-sw is set correctly before doing BC detection */
438 if (info->role_sw) {
439 queue_work(system_long_wq, &info->role_work);
440 flush_work(&info->role_work);
441 }
442
443 /* Start charger cable type detection */
444 axp288_extcon_enable(info);
445
446 device_init_wakeup(dev, true);
447 platform_set_drvdata(pdev, info);
448
449 return 0;
450}
451
452static int __maybe_unused axp288_extcon_suspend(struct device *dev)
453{
454 struct axp288_extcon_info *info = dev_get_drvdata(dev);
455
456 if (device_may_wakeup(dev))
457 enable_irq_wake(info->irq[VBUS_RISING_IRQ]);
458
459 return 0;
460}
461
462static int __maybe_unused axp288_extcon_resume(struct device *dev)
463{
464 struct axp288_extcon_info *info = dev_get_drvdata(dev);
465
466 /*
467 * Wakeup when a charger is connected to do charger-type
468 * connection and generate an extcon event which makes the
469 * axp288 charger driver set the input current limit.
470 */
471 if (device_may_wakeup(dev))
472 disable_irq_wake(info->irq[VBUS_RISING_IRQ]);
473
474 return 0;
475}
476
477static SIMPLE_DEV_PM_OPS(axp288_extcon_pm_ops, axp288_extcon_suspend,
478 axp288_extcon_resume);
479
480static const struct platform_device_id axp288_extcon_table[] = {
481 { .name = "axp288_extcon" },
482 {},
483};
484MODULE_DEVICE_TABLE(platform, axp288_extcon_table);
485
486static struct platform_driver axp288_extcon_driver = {
487 .probe = axp288_extcon_probe,
488 .id_table = axp288_extcon_table,
489 .driver = {
490 .name = "axp288_extcon",
491 .pm = &axp288_extcon_pm_ops,
492 },
493};
494
495static int __init axp288_extcon_init(void)
496{
497 return platform_driver_register(&axp288_extcon_driver);
498}
499module_init(axp288_extcon_init);
500
501static void __exit axp288_extcon_exit(void)
502{
503 platform_driver_unregister(&axp288_extcon_driver);
504}
505module_exit(axp288_extcon_exit);
506
507MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
508MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
509MODULE_DESCRIPTION("X-Powers AXP288 extcon driver");
510MODULE_LICENSE("GPL v2");
1/*
2 * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
3 *
4 * Copyright (c) 2017-2018 Hans de Goede <hdegoede@redhat.com>
5 * Copyright (C) 2015 Intel Corporation
6 * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 */
17
18#include <linux/acpi.h>
19#include <linux/module.h>
20#include <linux/kernel.h>
21#include <linux/io.h>
22#include <linux/slab.h>
23#include <linux/interrupt.h>
24#include <linux/platform_device.h>
25#include <linux/property.h>
26#include <linux/notifier.h>
27#include <linux/extcon-provider.h>
28#include <linux/regmap.h>
29#include <linux/mfd/axp20x.h>
30#include <linux/usb/role.h>
31#include <linux/workqueue.h>
32
33#include <asm/cpu_device_id.h>
34#include <asm/intel-family.h>
35
36/* Power source status register */
37#define PS_STAT_VBUS_TRIGGER BIT(0)
38#define PS_STAT_BAT_CHRG_DIR BIT(2)
39#define PS_STAT_VBUS_ABOVE_VHOLD BIT(3)
40#define PS_STAT_VBUS_VALID BIT(4)
41#define PS_STAT_VBUS_PRESENT BIT(5)
42
43/* BC module global register */
44#define BC_GLOBAL_RUN BIT(0)
45#define BC_GLOBAL_DET_STAT BIT(2)
46#define BC_GLOBAL_DBP_TOUT BIT(3)
47#define BC_GLOBAL_VLGC_COM_SEL BIT(4)
48#define BC_GLOBAL_DCD_TOUT_MASK (BIT(6)|BIT(5))
49#define BC_GLOBAL_DCD_TOUT_300MS 0
50#define BC_GLOBAL_DCD_TOUT_100MS 1
51#define BC_GLOBAL_DCD_TOUT_500MS 2
52#define BC_GLOBAL_DCD_TOUT_900MS 3
53#define BC_GLOBAL_DCD_DET_SEL BIT(7)
54
55/* BC module vbus control and status register */
56#define VBUS_CNTL_DPDM_PD_EN BIT(4)
57#define VBUS_CNTL_DPDM_FD_EN BIT(5)
58#define VBUS_CNTL_FIRST_PO_STAT BIT(6)
59
60/* BC USB status register */
61#define USB_STAT_BUS_STAT_MASK (BIT(3)|BIT(2)|BIT(1)|BIT(0))
62#define USB_STAT_BUS_STAT_SHIFT 0
63#define USB_STAT_BUS_STAT_ATHD 0
64#define USB_STAT_BUS_STAT_CONN 1
65#define USB_STAT_BUS_STAT_SUSP 2
66#define USB_STAT_BUS_STAT_CONF 3
67#define USB_STAT_USB_SS_MODE BIT(4)
68#define USB_STAT_DEAD_BAT_DET BIT(6)
69#define USB_STAT_DBP_UNCFG BIT(7)
70
71/* BC detect status register */
72#define DET_STAT_MASK (BIT(7)|BIT(6)|BIT(5))
73#define DET_STAT_SHIFT 5
74#define DET_STAT_SDP 1
75#define DET_STAT_CDP 2
76#define DET_STAT_DCP 3
77
78enum axp288_extcon_reg {
79 AXP288_PS_STAT_REG = 0x00,
80 AXP288_PS_BOOT_REASON_REG = 0x02,
81 AXP288_BC_GLOBAL_REG = 0x2c,
82 AXP288_BC_VBUS_CNTL_REG = 0x2d,
83 AXP288_BC_USB_STAT_REG = 0x2e,
84 AXP288_BC_DET_STAT_REG = 0x2f,
85};
86
87enum axp288_extcon_irq {
88 VBUS_FALLING_IRQ = 0,
89 VBUS_RISING_IRQ,
90 MV_CHNG_IRQ,
91 BC_USB_CHNG_IRQ,
92 EXTCON_IRQ_END,
93};
94
95static const unsigned int axp288_extcon_cables[] = {
96 EXTCON_CHG_USB_SDP,
97 EXTCON_CHG_USB_CDP,
98 EXTCON_CHG_USB_DCP,
99 EXTCON_USB,
100 EXTCON_NONE,
101};
102
103struct axp288_extcon_info {
104 struct device *dev;
105 struct regmap *regmap;
106 struct regmap_irq_chip_data *regmap_irqc;
107 struct usb_role_switch *role_sw;
108 struct work_struct role_work;
109 int irq[EXTCON_IRQ_END];
110 struct extcon_dev *edev;
111 struct extcon_dev *id_extcon;
112 struct notifier_block id_nb;
113 unsigned int previous_cable;
114 bool vbus_attach;
115};
116
117static const struct x86_cpu_id cherry_trail_cpu_ids[] = {
118 { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT, X86_FEATURE_ANY },
119 {}
120};
121
122/* Power up/down reason string array */
123static const char * const axp288_pwr_up_down_info[] = {
124 "Last wake caused by user pressing the power button",
125 "Last wake caused by a charger insertion",
126 "Last wake caused by a battery insertion",
127 "Last wake caused by SOC initiated global reset",
128 "Last wake caused by cold reset",
129 "Last shutdown caused by PMIC UVLO threshold",
130 "Last shutdown caused by SOC initiated cold off",
131 "Last shutdown caused by user pressing the power button",
132 NULL,
133};
134
135/*
136 * Decode and log the given "reset source indicator" (rsi)
137 * register and then clear it.
138 */
139static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
140{
141 const char * const *rsi;
142 unsigned int val, i, clear_mask = 0;
143 int ret;
144
145 ret = regmap_read(info->regmap, AXP288_PS_BOOT_REASON_REG, &val);
146 for (i = 0, rsi = axp288_pwr_up_down_info; *rsi; rsi++, i++) {
147 if (val & BIT(i)) {
148 dev_dbg(info->dev, "%s\n", *rsi);
149 clear_mask |= BIT(i);
150 }
151 }
152
153 /* Clear the register value for next reboot (write 1 to clear bit) */
154 regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
155}
156
157/*
158 * The below code to control the USB role-switch on devices with an AXP288
159 * may seem out of place, but there are 2 reasons why this is the best place
160 * to control the USB role-switch on such devices:
161 * 1) On many devices the USB role is controlled by AML code, but the AML code
162 * only switches between the host and none roles, because of Windows not
163 * really using device mode. To make device mode work we need to toggle
164 * between the none/device roles based on Vbus presence, and this driver
165 * gets interrupts on Vbus insertion / removal.
166 * 2) In order for our BC1.2 charger detection to work properly the role
167 * mux must be properly set to device mode before we do the detection.
168 */
169
170/* Returns the id-pin value, note pulled low / false == host-mode */
171static bool axp288_get_id_pin(struct axp288_extcon_info *info)
172{
173 enum usb_role role;
174
175 if (info->id_extcon)
176 return extcon_get_state(info->id_extcon, EXTCON_USB_HOST) <= 0;
177
178 /* We cannot access the id-pin, see what mode the AML code has set */
179 role = usb_role_switch_get_role(info->role_sw);
180 return role != USB_ROLE_HOST;
181}
182
183static void axp288_usb_role_work(struct work_struct *work)
184{
185 struct axp288_extcon_info *info =
186 container_of(work, struct axp288_extcon_info, role_work);
187 enum usb_role role;
188 bool id_pin;
189 int ret;
190
191 id_pin = axp288_get_id_pin(info);
192 if (!id_pin)
193 role = USB_ROLE_HOST;
194 else if (info->vbus_attach)
195 role = USB_ROLE_DEVICE;
196 else
197 role = USB_ROLE_NONE;
198
199 ret = usb_role_switch_set_role(info->role_sw, role);
200 if (ret)
201 dev_err(info->dev, "failed to set role: %d\n", ret);
202}
203
204static bool axp288_get_vbus_attach(struct axp288_extcon_info *info)
205{
206 int ret, pwr_stat;
207
208 ret = regmap_read(info->regmap, AXP288_PS_STAT_REG, &pwr_stat);
209 if (ret < 0) {
210 dev_err(info->dev, "failed to read vbus status\n");
211 return false;
212 }
213
214 return !!(pwr_stat & PS_STAT_VBUS_VALID);
215}
216
217static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
218{
219 int ret, stat, cfg;
220 u8 chrg_type;
221 unsigned int cable = info->previous_cable;
222 bool vbus_attach = false;
223
224 vbus_attach = axp288_get_vbus_attach(info);
225 if (!vbus_attach)
226 goto no_vbus;
227
228 /* Check charger detection completion status */
229 ret = regmap_read(info->regmap, AXP288_BC_GLOBAL_REG, &cfg);
230 if (ret < 0)
231 goto dev_det_ret;
232 if (cfg & BC_GLOBAL_DET_STAT) {
233 dev_dbg(info->dev, "can't complete the charger detection\n");
234 goto dev_det_ret;
235 }
236
237 ret = regmap_read(info->regmap, AXP288_BC_DET_STAT_REG, &stat);
238 if (ret < 0)
239 goto dev_det_ret;
240
241 chrg_type = (stat & DET_STAT_MASK) >> DET_STAT_SHIFT;
242
243 switch (chrg_type) {
244 case DET_STAT_SDP:
245 dev_dbg(info->dev, "sdp cable is connected\n");
246 cable = EXTCON_CHG_USB_SDP;
247 break;
248 case DET_STAT_CDP:
249 dev_dbg(info->dev, "cdp cable is connected\n");
250 cable = EXTCON_CHG_USB_CDP;
251 break;
252 case DET_STAT_DCP:
253 dev_dbg(info->dev, "dcp cable is connected\n");
254 cable = EXTCON_CHG_USB_DCP;
255 break;
256 default:
257 dev_warn(info->dev, "unknown (reserved) bc detect result\n");
258 cable = EXTCON_CHG_USB_SDP;
259 }
260
261no_vbus:
262 extcon_set_state_sync(info->edev, info->previous_cable, false);
263 if (info->previous_cable == EXTCON_CHG_USB_SDP)
264 extcon_set_state_sync(info->edev, EXTCON_USB, false);
265
266 if (vbus_attach) {
267 extcon_set_state_sync(info->edev, cable, vbus_attach);
268 if (cable == EXTCON_CHG_USB_SDP)
269 extcon_set_state_sync(info->edev, EXTCON_USB,
270 vbus_attach);
271
272 info->previous_cable = cable;
273 }
274
275 if (info->role_sw && info->vbus_attach != vbus_attach) {
276 info->vbus_attach = vbus_attach;
277 /* Setting the role can take a while */
278 queue_work(system_long_wq, &info->role_work);
279 }
280
281 return 0;
282
283dev_det_ret:
284 if (ret < 0)
285 dev_err(info->dev, "failed to detect BC Mod\n");
286
287 return ret;
288}
289
290static int axp288_extcon_id_evt(struct notifier_block *nb,
291 unsigned long event, void *param)
292{
293 struct axp288_extcon_info *info =
294 container_of(nb, struct axp288_extcon_info, id_nb);
295
296 /* We may not sleep and setting the role can take a while */
297 queue_work(system_long_wq, &info->role_work);
298
299 return NOTIFY_OK;
300}
301
302static irqreturn_t axp288_extcon_isr(int irq, void *data)
303{
304 struct axp288_extcon_info *info = data;
305 int ret;
306
307 ret = axp288_handle_chrg_det_event(info);
308 if (ret < 0)
309 dev_err(info->dev, "failed to handle the interrupt\n");
310
311 return IRQ_HANDLED;
312}
313
314static void axp288_extcon_enable(struct axp288_extcon_info *info)
315{
316 regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
317 BC_GLOBAL_RUN, 0);
318 /* Enable the charger detection logic */
319 regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
320 BC_GLOBAL_RUN, BC_GLOBAL_RUN);
321}
322
323static void axp288_put_role_sw(void *data)
324{
325 struct axp288_extcon_info *info = data;
326
327 cancel_work_sync(&info->role_work);
328 usb_role_switch_put(info->role_sw);
329}
330
331static int axp288_extcon_probe(struct platform_device *pdev)
332{
333 struct axp288_extcon_info *info;
334 struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
335 struct device *dev = &pdev->dev;
336 const char *name;
337 int ret, i, pirq;
338
339 info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
340 if (!info)
341 return -ENOMEM;
342
343 info->dev = &pdev->dev;
344 info->regmap = axp20x->regmap;
345 info->regmap_irqc = axp20x->regmap_irqc;
346 info->previous_cable = EXTCON_NONE;
347 INIT_WORK(&info->role_work, axp288_usb_role_work);
348 info->id_nb.notifier_call = axp288_extcon_id_evt;
349
350 platform_set_drvdata(pdev, info);
351
352 info->role_sw = usb_role_switch_get(dev);
353 if (IS_ERR(info->role_sw))
354 return PTR_ERR(info->role_sw);
355 if (info->role_sw) {
356 ret = devm_add_action_or_reset(dev, axp288_put_role_sw, info);
357 if (ret)
358 return ret;
359
360 name = acpi_dev_get_first_match_name("INT3496", NULL, -1);
361 if (name) {
362 info->id_extcon = extcon_get_extcon_dev(name);
363 if (!info->id_extcon)
364 return -EPROBE_DEFER;
365
366 dev_info(dev, "controlling USB role\n");
367 } else {
368 dev_info(dev, "controlling USB role based on Vbus presence\n");
369 }
370 }
371
372 info->vbus_attach = axp288_get_vbus_attach(info);
373
374 axp288_extcon_log_rsi(info);
375
376 /* Initialize extcon device */
377 info->edev = devm_extcon_dev_allocate(&pdev->dev,
378 axp288_extcon_cables);
379 if (IS_ERR(info->edev)) {
380 dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
381 return PTR_ERR(info->edev);
382 }
383
384 /* Register extcon device */
385 ret = devm_extcon_dev_register(&pdev->dev, info->edev);
386 if (ret) {
387 dev_err(&pdev->dev, "failed to register extcon device\n");
388 return ret;
389 }
390
391 for (i = 0; i < EXTCON_IRQ_END; i++) {
392 pirq = platform_get_irq(pdev, i);
393 if (pirq < 0)
394 return pirq;
395
396 info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
397 if (info->irq[i] < 0) {
398 dev_err(&pdev->dev,
399 "failed to get virtual interrupt=%d\n", pirq);
400 ret = info->irq[i];
401 return ret;
402 }
403
404 ret = devm_request_threaded_irq(&pdev->dev, info->irq[i],
405 NULL, axp288_extcon_isr,
406 IRQF_ONESHOT | IRQF_NO_SUSPEND,
407 pdev->name, info);
408 if (ret) {
409 dev_err(&pdev->dev, "failed to request interrupt=%d\n",
410 info->irq[i]);
411 return ret;
412 }
413 }
414
415 if (info->id_extcon) {
416 ret = devm_extcon_register_notifier_all(dev, info->id_extcon,
417 &info->id_nb);
418 if (ret)
419 return ret;
420 }
421
422 /* Make sure the role-sw is set correctly before doing BC detection */
423 if (info->role_sw) {
424 queue_work(system_long_wq, &info->role_work);
425 flush_work(&info->role_work);
426 }
427
428 /* Start charger cable type detection */
429 axp288_extcon_enable(info);
430
431 return 0;
432}
433
434static const struct platform_device_id axp288_extcon_table[] = {
435 { .name = "axp288_extcon" },
436 {},
437};
438MODULE_DEVICE_TABLE(platform, axp288_extcon_table);
439
440static struct platform_driver axp288_extcon_driver = {
441 .probe = axp288_extcon_probe,
442 .id_table = axp288_extcon_table,
443 .driver = {
444 .name = "axp288_extcon",
445 },
446};
447
448static struct device_connection axp288_extcon_role_sw_conn = {
449 .endpoint[0] = "axp288_extcon",
450 .endpoint[1] = "intel_xhci_usb_sw-role-switch",
451 .id = "usb-role-switch",
452};
453
454static int __init axp288_extcon_init(void)
455{
456 if (x86_match_cpu(cherry_trail_cpu_ids))
457 device_connection_add(&axp288_extcon_role_sw_conn);
458
459 return platform_driver_register(&axp288_extcon_driver);
460}
461module_init(axp288_extcon_init);
462
463static void __exit axp288_extcon_exit(void)
464{
465 if (x86_match_cpu(cherry_trail_cpu_ids))
466 device_connection_remove(&axp288_extcon_role_sw_conn);
467
468 platform_driver_unregister(&axp288_extcon_driver);
469}
470module_exit(axp288_extcon_exit);
471
472MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
473MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
474MODULE_DESCRIPTION("X-Powers AXP288 extcon driver");
475MODULE_LICENSE("GPL v2");