Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * pata-cs5530.c - CS5530 PATA for new ATA layer
4 * (C) 2005 Red Hat Inc
5 *
6 * based upon cs5530.c by Mark Lord.
7 *
8 * Loosely based on the piix & svwks drivers.
9 *
10 * Documentation:
11 * Available from AMD web site.
12 */
13
14#include <linux/kernel.h>
15#include <linux/module.h>
16#include <linux/pci.h>
17#include <linux/blkdev.h>
18#include <linux/delay.h>
19#include <scsi/scsi_host.h>
20#include <linux/libata.h>
21#include <linux/dmi.h>
22
23#define DRV_NAME "pata_cs5530"
24#define DRV_VERSION "0.7.4"
25
26static void __iomem *cs5530_port_base(struct ata_port *ap)
27{
28 unsigned long bmdma = (unsigned long)ap->ioaddr.bmdma_addr;
29
30 return (void __iomem *)((bmdma & ~0x0F) + 0x20 + 0x10 * ap->port_no);
31}
32
33/**
34 * cs5530_set_piomode - PIO setup
35 * @ap: ATA interface
36 * @adev: device on the interface
37 *
38 * Set our PIO requirements. This is fairly simple on the CS5530
39 * chips.
40 */
41
42static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev)
43{
44 static const unsigned int cs5530_pio_timings[2][5] = {
45 {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
46 {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
47 };
48 void __iomem *base = cs5530_port_base(ap);
49 u32 tuning;
50 int format;
51
52 /* Find out which table to use */
53 tuning = ioread32(base + 0x04);
54 format = (tuning & 0x80000000UL) ? 1 : 0;
55
56 /* Now load the right timing register */
57 if (adev->devno)
58 base += 0x08;
59
60 iowrite32(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base);
61}
62
63/**
64 * cs5530_set_dmamode - DMA timing setup
65 * @ap: ATA interface
66 * @adev: Device being configured
67 *
68 * We cannot mix MWDMA and UDMA without reloading timings each switch
69 * master to slave. We track the last DMA setup in order to minimise
70 * reloads.
71 */
72
73static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
74{
75 void __iomem *base = cs5530_port_base(ap);
76 u32 tuning, timing = 0;
77 u8 reg;
78
79 /* Find out which table to use */
80 tuning = ioread32(base + 0x04);
81
82 switch(adev->dma_mode) {
83 case XFER_UDMA_0:
84 timing = 0x00921250;break;
85 case XFER_UDMA_1:
86 timing = 0x00911140;break;
87 case XFER_UDMA_2:
88 timing = 0x00911030;break;
89 case XFER_MW_DMA_0:
90 timing = 0x00077771;break;
91 case XFER_MW_DMA_1:
92 timing = 0x00012121;break;
93 case XFER_MW_DMA_2:
94 timing = 0x00002020;break;
95 default:
96 BUG();
97 }
98 /* Merge in the PIO format bit */
99 timing |= (tuning & 0x80000000UL);
100 if (adev->devno == 0) /* Master */
101 iowrite32(timing, base + 0x04);
102 else {
103 if (timing & 0x00100000)
104 tuning |= 0x00100000; /* UDMA for both */
105 else
106 tuning &= ~0x00100000; /* MWDMA for both */
107 iowrite32(tuning, base + 0x04);
108 iowrite32(timing, base + 0x0C);
109 }
110
111 /* Set the DMA capable bit in the BMDMA area */
112 reg = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
113 reg |= (1 << (5 + adev->devno));
114 iowrite8(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
115
116 /* Remember the last DMA setup we did */
117
118 ap->private_data = adev;
119}
120
121/**
122 * cs5530_qc_issue - command issue
123 * @qc: command pending
124 *
125 * Called when the libata layer is about to issue a command. We wrap
126 * this interface so that we can load the correct ATA timings if
127 * necessary. Specifically we have a problem that there is only
128 * one MWDMA/UDMA bit.
129 */
130
131static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
132{
133 struct ata_port *ap = qc->ap;
134 struct ata_device *adev = qc->dev;
135 struct ata_device *prev = ap->private_data;
136
137 /* See if the DMA settings could be wrong */
138 if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
139 /* Maybe, but do the channels match MWDMA/UDMA ? */
140 if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
141 (ata_using_udma(prev) && !ata_using_udma(adev)))
142 /* Switch the mode bits */
143 cs5530_set_dmamode(ap, adev);
144 }
145
146 return ata_bmdma_qc_issue(qc);
147}
148
149static struct scsi_host_template cs5530_sht = {
150 ATA_BMDMA_SHT(DRV_NAME),
151 .sg_tablesize = LIBATA_DUMB_MAX_PRD,
152};
153
154static struct ata_port_operations cs5530_port_ops = {
155 .inherits = &ata_bmdma_port_ops,
156
157 .qc_prep = ata_bmdma_dumb_qc_prep,
158 .qc_issue = cs5530_qc_issue,
159
160 .cable_detect = ata_cable_40wire,
161 .set_piomode = cs5530_set_piomode,
162 .set_dmamode = cs5530_set_dmamode,
163};
164
165static const struct dmi_system_id palmax_dmi_table[] = {
166 {
167 .ident = "Palmax PD1100",
168 .matches = {
169 DMI_MATCH(DMI_SYS_VENDOR, "Cyrix"),
170 DMI_MATCH(DMI_PRODUCT_NAME, "Caddis"),
171 },
172 },
173 { }
174};
175
176static int cs5530_is_palmax(void)
177{
178 if (dmi_check_system(palmax_dmi_table)) {
179 printk(KERN_INFO "Palmax PD1100: Disabling DMA on docking port.\n");
180 return 1;
181 }
182 return 0;
183}
184
185
186/**
187 * cs5530_init_chip - Chipset init
188 *
189 * Perform the chip initialisation work that is shared between both
190 * setup and resume paths
191 */
192
193static int cs5530_init_chip(void)
194{
195 struct pci_dev *master_0 = NULL, *cs5530_0 = NULL, *dev = NULL;
196
197 while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
198 switch (dev->device) {
199 case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
200 master_0 = pci_dev_get(dev);
201 break;
202 case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
203 cs5530_0 = pci_dev_get(dev);
204 break;
205 }
206 }
207 if (!master_0) {
208 printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
209 goto fail_put;
210 }
211 if (!cs5530_0) {
212 printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
213 goto fail_put;
214 }
215
216 pci_set_master(cs5530_0);
217 pci_try_set_mwi(cs5530_0);
218
219 /*
220 * Set PCI CacheLineSize to 16-bytes:
221 * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530
222 *
223 * Note: This value is constant because the 5530 is only a Geode companion
224 */
225
226 pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04);
227
228 /*
229 * Disable trapping of UDMA register accesses (Win98 hack):
230 * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530
231 */
232
233 pci_write_config_word(cs5530_0, 0xd0, 0x5006);
234
235 /*
236 * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus:
237 * The other settings are what is necessary to get the register
238 * into a sane state for IDE DMA operation.
239 */
240
241 pci_write_config_byte(master_0, 0x40, 0x1e);
242
243 /*
244 * Set max PCI burst size (16-bytes seems to work best):
245 * 16bytes: set bit-1 at 0x41 (reg value of 0x16)
246 * all others: clear bit-1 at 0x41, and do:
247 * 128bytes: OR 0x00 at 0x41
248 * 256bytes: OR 0x04 at 0x41
249 * 512bytes: OR 0x08 at 0x41
250 * 1024bytes: OR 0x0c at 0x41
251 */
252
253 pci_write_config_byte(master_0, 0x41, 0x14);
254
255 /*
256 * These settings are necessary to get the chip
257 * into a sane state for IDE DMA operation.
258 */
259
260 pci_write_config_byte(master_0, 0x42, 0x00);
261 pci_write_config_byte(master_0, 0x43, 0xc1);
262
263 pci_dev_put(master_0);
264 pci_dev_put(cs5530_0);
265 return 0;
266fail_put:
267 pci_dev_put(master_0);
268 pci_dev_put(cs5530_0);
269 return -ENODEV;
270}
271
272/**
273 * cs5530_init_one - Initialise a CS5530
274 * @dev: PCI device
275 * @id: Entry in match table
276 *
277 * Install a driver for the newly found CS5530 companion chip. Most of
278 * this is just housekeeping. We have to set the chip up correctly and
279 * turn off various bits of emulation magic.
280 */
281
282static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
283{
284 static const struct ata_port_info info = {
285 .flags = ATA_FLAG_SLAVE_POSS,
286 .pio_mask = ATA_PIO4,
287 .mwdma_mask = ATA_MWDMA2,
288 .udma_mask = ATA_UDMA2,
289 .port_ops = &cs5530_port_ops
290 };
291 /* The docking connector doesn't do UDMA, and it seems not MWDMA */
292 static const struct ata_port_info info_palmax_secondary = {
293 .flags = ATA_FLAG_SLAVE_POSS,
294 .pio_mask = ATA_PIO4,
295 .port_ops = &cs5530_port_ops
296 };
297 const struct ata_port_info *ppi[] = { &info, NULL };
298 int rc;
299
300 rc = pcim_enable_device(pdev);
301 if (rc)
302 return rc;
303
304 /* Chip initialisation */
305 if (cs5530_init_chip())
306 return -ENODEV;
307
308 if (cs5530_is_palmax())
309 ppi[1] = &info_palmax_secondary;
310
311 /* Now kick off ATA set up */
312 return ata_pci_bmdma_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
313}
314
315#ifdef CONFIG_PM_SLEEP
316static int cs5530_reinit_one(struct pci_dev *pdev)
317{
318 struct ata_host *host = pci_get_drvdata(pdev);
319 int rc;
320
321 rc = ata_pci_device_do_resume(pdev);
322 if (rc)
323 return rc;
324
325 /* If we fail on resume we are doomed */
326 if (cs5530_init_chip())
327 return -EIO;
328
329 ata_host_resume(host);
330 return 0;
331}
332#endif /* CONFIG_PM_SLEEP */
333
334static const struct pci_device_id cs5530[] = {
335 { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), },
336
337 { },
338};
339
340static struct pci_driver cs5530_pci_driver = {
341 .name = DRV_NAME,
342 .id_table = cs5530,
343 .probe = cs5530_init_one,
344 .remove = ata_pci_remove_one,
345#ifdef CONFIG_PM_SLEEP
346 .suspend = ata_pci_device_suspend,
347 .resume = cs5530_reinit_one,
348#endif
349};
350
351module_pci_driver(cs5530_pci_driver);
352
353MODULE_AUTHOR("Alan Cox");
354MODULE_DESCRIPTION("low-level driver for the Cyrix/NS/AMD 5530");
355MODULE_LICENSE("GPL");
356MODULE_DEVICE_TABLE(pci, cs5530);
357MODULE_VERSION(DRV_VERSION);
1/*
2 * pata-cs5530.c - CS5530 PATA for new ATA layer
3 * (C) 2005 Red Hat Inc
4 *
5 * based upon cs5530.c by Mark Lord.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 *
20 * Loosely based on the piix & svwks drivers.
21 *
22 * Documentation:
23 * Available from AMD web site.
24 */
25
26#include <linux/kernel.h>
27#include <linux/module.h>
28#include <linux/pci.h>
29#include <linux/blkdev.h>
30#include <linux/delay.h>
31#include <scsi/scsi_host.h>
32#include <linux/libata.h>
33#include <linux/dmi.h>
34
35#define DRV_NAME "pata_cs5530"
36#define DRV_VERSION "0.7.4"
37
38static void __iomem *cs5530_port_base(struct ata_port *ap)
39{
40 unsigned long bmdma = (unsigned long)ap->ioaddr.bmdma_addr;
41
42 return (void __iomem *)((bmdma & ~0x0F) + 0x20 + 0x10 * ap->port_no);
43}
44
45/**
46 * cs5530_set_piomode - PIO setup
47 * @ap: ATA interface
48 * @adev: device on the interface
49 *
50 * Set our PIO requirements. This is fairly simple on the CS5530
51 * chips.
52 */
53
54static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev)
55{
56 static const unsigned int cs5530_pio_timings[2][5] = {
57 {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
58 {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
59 };
60 void __iomem *base = cs5530_port_base(ap);
61 u32 tuning;
62 int format;
63
64 /* Find out which table to use */
65 tuning = ioread32(base + 0x04);
66 format = (tuning & 0x80000000UL) ? 1 : 0;
67
68 /* Now load the right timing register */
69 if (adev->devno)
70 base += 0x08;
71
72 iowrite32(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base);
73}
74
75/**
76 * cs5530_set_dmamode - DMA timing setup
77 * @ap: ATA interface
78 * @adev: Device being configured
79 *
80 * We cannot mix MWDMA and UDMA without reloading timings each switch
81 * master to slave. We track the last DMA setup in order to minimise
82 * reloads.
83 */
84
85static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
86{
87 void __iomem *base = cs5530_port_base(ap);
88 u32 tuning, timing = 0;
89 u8 reg;
90
91 /* Find out which table to use */
92 tuning = ioread32(base + 0x04);
93
94 switch(adev->dma_mode) {
95 case XFER_UDMA_0:
96 timing = 0x00921250;break;
97 case XFER_UDMA_1:
98 timing = 0x00911140;break;
99 case XFER_UDMA_2:
100 timing = 0x00911030;break;
101 case XFER_MW_DMA_0:
102 timing = 0x00077771;break;
103 case XFER_MW_DMA_1:
104 timing = 0x00012121;break;
105 case XFER_MW_DMA_2:
106 timing = 0x00002020;break;
107 default:
108 BUG();
109 }
110 /* Merge in the PIO format bit */
111 timing |= (tuning & 0x80000000UL);
112 if (adev->devno == 0) /* Master */
113 iowrite32(timing, base + 0x04);
114 else {
115 if (timing & 0x00100000)
116 tuning |= 0x00100000; /* UDMA for both */
117 else
118 tuning &= ~0x00100000; /* MWDMA for both */
119 iowrite32(tuning, base + 0x04);
120 iowrite32(timing, base + 0x0C);
121 }
122
123 /* Set the DMA capable bit in the BMDMA area */
124 reg = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
125 reg |= (1 << (5 + adev->devno));
126 iowrite8(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
127
128 /* Remember the last DMA setup we did */
129
130 ap->private_data = adev;
131}
132
133/**
134 * cs5530_qc_issue - command issue
135 * @qc: command pending
136 *
137 * Called when the libata layer is about to issue a command. We wrap
138 * this interface so that we can load the correct ATA timings if
139 * necessary. Specifically we have a problem that there is only
140 * one MWDMA/UDMA bit.
141 */
142
143static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
144{
145 struct ata_port *ap = qc->ap;
146 struct ata_device *adev = qc->dev;
147 struct ata_device *prev = ap->private_data;
148
149 /* See if the DMA settings could be wrong */
150 if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
151 /* Maybe, but do the channels match MWDMA/UDMA ? */
152 if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
153 (ata_using_udma(prev) && !ata_using_udma(adev)))
154 /* Switch the mode bits */
155 cs5530_set_dmamode(ap, adev);
156 }
157
158 return ata_bmdma_qc_issue(qc);
159}
160
161static struct scsi_host_template cs5530_sht = {
162 ATA_BMDMA_SHT(DRV_NAME),
163 .sg_tablesize = LIBATA_DUMB_MAX_PRD,
164};
165
166static struct ata_port_operations cs5530_port_ops = {
167 .inherits = &ata_bmdma_port_ops,
168
169 .qc_prep = ata_bmdma_dumb_qc_prep,
170 .qc_issue = cs5530_qc_issue,
171
172 .cable_detect = ata_cable_40wire,
173 .set_piomode = cs5530_set_piomode,
174 .set_dmamode = cs5530_set_dmamode,
175};
176
177static const struct dmi_system_id palmax_dmi_table[] = {
178 {
179 .ident = "Palmax PD1100",
180 .matches = {
181 DMI_MATCH(DMI_SYS_VENDOR, "Cyrix"),
182 DMI_MATCH(DMI_PRODUCT_NAME, "Caddis"),
183 },
184 },
185 { }
186};
187
188static int cs5530_is_palmax(void)
189{
190 if (dmi_check_system(palmax_dmi_table)) {
191 printk(KERN_INFO "Palmax PD1100: Disabling DMA on docking port.\n");
192 return 1;
193 }
194 return 0;
195}
196
197
198/**
199 * cs5530_init_chip - Chipset init
200 *
201 * Perform the chip initialisation work that is shared between both
202 * setup and resume paths
203 */
204
205static int cs5530_init_chip(void)
206{
207 struct pci_dev *master_0 = NULL, *cs5530_0 = NULL, *dev = NULL;
208
209 while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
210 switch (dev->device) {
211 case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
212 master_0 = pci_dev_get(dev);
213 break;
214 case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
215 cs5530_0 = pci_dev_get(dev);
216 break;
217 }
218 }
219 if (!master_0) {
220 printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
221 goto fail_put;
222 }
223 if (!cs5530_0) {
224 printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
225 goto fail_put;
226 }
227
228 pci_set_master(cs5530_0);
229 pci_try_set_mwi(cs5530_0);
230
231 /*
232 * Set PCI CacheLineSize to 16-bytes:
233 * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530
234 *
235 * Note: This value is constant because the 5530 is only a Geode companion
236 */
237
238 pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04);
239
240 /*
241 * Disable trapping of UDMA register accesses (Win98 hack):
242 * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530
243 */
244
245 pci_write_config_word(cs5530_0, 0xd0, 0x5006);
246
247 /*
248 * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus:
249 * The other settings are what is necessary to get the register
250 * into a sane state for IDE DMA operation.
251 */
252
253 pci_write_config_byte(master_0, 0x40, 0x1e);
254
255 /*
256 * Set max PCI burst size (16-bytes seems to work best):
257 * 16bytes: set bit-1 at 0x41 (reg value of 0x16)
258 * all others: clear bit-1 at 0x41, and do:
259 * 128bytes: OR 0x00 at 0x41
260 * 256bytes: OR 0x04 at 0x41
261 * 512bytes: OR 0x08 at 0x41
262 * 1024bytes: OR 0x0c at 0x41
263 */
264
265 pci_write_config_byte(master_0, 0x41, 0x14);
266
267 /*
268 * These settings are necessary to get the chip
269 * into a sane state for IDE DMA operation.
270 */
271
272 pci_write_config_byte(master_0, 0x42, 0x00);
273 pci_write_config_byte(master_0, 0x43, 0xc1);
274
275 pci_dev_put(master_0);
276 pci_dev_put(cs5530_0);
277 return 0;
278fail_put:
279 pci_dev_put(master_0);
280 pci_dev_put(cs5530_0);
281 return -ENODEV;
282}
283
284/**
285 * cs5530_init_one - Initialise a CS5530
286 * @dev: PCI device
287 * @id: Entry in match table
288 *
289 * Install a driver for the newly found CS5530 companion chip. Most of
290 * this is just housekeeping. We have to set the chip up correctly and
291 * turn off various bits of emulation magic.
292 */
293
294static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
295{
296 static const struct ata_port_info info = {
297 .flags = ATA_FLAG_SLAVE_POSS,
298 .pio_mask = ATA_PIO4,
299 .mwdma_mask = ATA_MWDMA2,
300 .udma_mask = ATA_UDMA2,
301 .port_ops = &cs5530_port_ops
302 };
303 /* The docking connector doesn't do UDMA, and it seems not MWDMA */
304 static const struct ata_port_info info_palmax_secondary = {
305 .flags = ATA_FLAG_SLAVE_POSS,
306 .pio_mask = ATA_PIO4,
307 .port_ops = &cs5530_port_ops
308 };
309 const struct ata_port_info *ppi[] = { &info, NULL };
310 int rc;
311
312 rc = pcim_enable_device(pdev);
313 if (rc)
314 return rc;
315
316 /* Chip initialisation */
317 if (cs5530_init_chip())
318 return -ENODEV;
319
320 if (cs5530_is_palmax())
321 ppi[1] = &info_palmax_secondary;
322
323 /* Now kick off ATA set up */
324 return ata_pci_bmdma_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
325}
326
327#ifdef CONFIG_PM_SLEEP
328static int cs5530_reinit_one(struct pci_dev *pdev)
329{
330 struct ata_host *host = pci_get_drvdata(pdev);
331 int rc;
332
333 rc = ata_pci_device_do_resume(pdev);
334 if (rc)
335 return rc;
336
337 /* If we fail on resume we are doomed */
338 if (cs5530_init_chip())
339 return -EIO;
340
341 ata_host_resume(host);
342 return 0;
343}
344#endif /* CONFIG_PM_SLEEP */
345
346static const struct pci_device_id cs5530[] = {
347 { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), },
348
349 { },
350};
351
352static struct pci_driver cs5530_pci_driver = {
353 .name = DRV_NAME,
354 .id_table = cs5530,
355 .probe = cs5530_init_one,
356 .remove = ata_pci_remove_one,
357#ifdef CONFIG_PM_SLEEP
358 .suspend = ata_pci_device_suspend,
359 .resume = cs5530_reinit_one,
360#endif
361};
362
363module_pci_driver(cs5530_pci_driver);
364
365MODULE_AUTHOR("Alan Cox");
366MODULE_DESCRIPTION("low-level driver for the Cyrix/NS/AMD 5530");
367MODULE_LICENSE("GPL");
368MODULE_DEVICE_TABLE(pci, cs5530);
369MODULE_VERSION(DRV_VERSION);