Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * pci_irq.c - ACPI PCI Interrupt Routing ($Revision: 11 $)
4 *
5 * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
6 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
7 * Copyright (C) 2002 Dominik Brodowski <devel@brodo.de>
8 * (c) Copyright 2008 Hewlett-Packard Development Company, L.P.
9 * Bjorn Helgaas <bjorn.helgaas@hp.com>
10 */
11
12
13#include <linux/dmi.h>
14#include <linux/kernel.h>
15#include <linux/module.h>
16#include <linux/init.h>
17#include <linux/types.h>
18#include <linux/spinlock.h>
19#include <linux/pm.h>
20#include <linux/pci.h>
21#include <linux/acpi.h>
22#include <linux/slab.h>
23#include <linux/interrupt.h>
24
25#define PREFIX "ACPI: "
26
27#define _COMPONENT ACPI_PCI_COMPONENT
28ACPI_MODULE_NAME("pci_irq");
29
30struct acpi_prt_entry {
31 struct acpi_pci_id id;
32 u8 pin;
33 acpi_handle link;
34 u32 index; /* GSI, or link _CRS index */
35};
36
37static inline char pin_name(int pin)
38{
39 return 'A' + pin - 1;
40}
41
42/* --------------------------------------------------------------------------
43 PCI IRQ Routing Table (PRT) Support
44 -------------------------------------------------------------------------- */
45
46/* http://bugzilla.kernel.org/show_bug.cgi?id=4773 */
47static const struct dmi_system_id medion_md9580[] = {
48 {
49 .ident = "Medion MD9580-F laptop",
50 .matches = {
51 DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"),
52 DMI_MATCH(DMI_PRODUCT_NAME, "A555"),
53 },
54 },
55 { }
56};
57
58/* http://bugzilla.kernel.org/show_bug.cgi?id=5044 */
59static const struct dmi_system_id dell_optiplex[] = {
60 {
61 .ident = "Dell Optiplex GX1",
62 .matches = {
63 DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
64 DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX1 600S+"),
65 },
66 },
67 { }
68};
69
70/* http://bugzilla.kernel.org/show_bug.cgi?id=10138 */
71static const struct dmi_system_id hp_t5710[] = {
72 {
73 .ident = "HP t5710",
74 .matches = {
75 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
76 DMI_MATCH(DMI_PRODUCT_NAME, "hp t5000 series"),
77 DMI_MATCH(DMI_BOARD_NAME, "098Ch"),
78 },
79 },
80 { }
81};
82
83struct prt_quirk {
84 const struct dmi_system_id *system;
85 unsigned int segment;
86 unsigned int bus;
87 unsigned int device;
88 unsigned char pin;
89 const char *source; /* according to BIOS */
90 const char *actual_source;
91};
92
93#define PCI_INTX_PIN(c) (c - 'A' + 1)
94
95/*
96 * These systems have incorrect _PRT entries. The BIOS claims the PCI
97 * interrupt at the listed segment/bus/device/pin is connected to the first
98 * link device, but it is actually connected to the second.
99 */
100static const struct prt_quirk prt_quirks[] = {
101 { medion_md9580, 0, 0, 9, PCI_INTX_PIN('A'),
102 "\\_SB_.PCI0.ISA_.LNKA",
103 "\\_SB_.PCI0.ISA_.LNKB"},
104 { dell_optiplex, 0, 0, 0xd, PCI_INTX_PIN('A'),
105 "\\_SB_.LNKB",
106 "\\_SB_.LNKA"},
107 { hp_t5710, 0, 0, 1, PCI_INTX_PIN('A'),
108 "\\_SB_.PCI0.LNK1",
109 "\\_SB_.PCI0.LNK3"},
110};
111
112static void do_prt_fixups(struct acpi_prt_entry *entry,
113 struct acpi_pci_routing_table *prt)
114{
115 int i;
116 const struct prt_quirk *quirk;
117
118 for (i = 0; i < ARRAY_SIZE(prt_quirks); i++) {
119 quirk = &prt_quirks[i];
120
121 /* All current quirks involve link devices, not GSIs */
122 if (dmi_check_system(quirk->system) &&
123 entry->id.segment == quirk->segment &&
124 entry->id.bus == quirk->bus &&
125 entry->id.device == quirk->device &&
126 entry->pin == quirk->pin &&
127 !strcmp(prt->source, quirk->source) &&
128 strlen(prt->source) >= strlen(quirk->actual_source)) {
129 printk(KERN_WARNING PREFIX "firmware reports "
130 "%04x:%02x:%02x PCI INT %c connected to %s; "
131 "changing to %s\n",
132 entry->id.segment, entry->id.bus,
133 entry->id.device, pin_name(entry->pin),
134 prt->source, quirk->actual_source);
135 strcpy(prt->source, quirk->actual_source);
136 }
137 }
138}
139
140static int acpi_pci_irq_check_entry(acpi_handle handle, struct pci_dev *dev,
141 int pin, struct acpi_pci_routing_table *prt,
142 struct acpi_prt_entry **entry_ptr)
143{
144 int segment = pci_domain_nr(dev->bus);
145 int bus = dev->bus->number;
146 int device = pci_ari_enabled(dev->bus) ? 0 : PCI_SLOT(dev->devfn);
147 struct acpi_prt_entry *entry;
148
149 if (((prt->address >> 16) & 0xffff) != device ||
150 prt->pin + 1 != pin)
151 return -ENODEV;
152
153 entry = kzalloc(sizeof(struct acpi_prt_entry), GFP_KERNEL);
154 if (!entry)
155 return -ENOMEM;
156
157 /*
158 * Note that the _PRT uses 0=INTA, 1=INTB, etc, while PCI uses
159 * 1=INTA, 2=INTB. We use the PCI encoding throughout, so convert
160 * it here.
161 */
162 entry->id.segment = segment;
163 entry->id.bus = bus;
164 entry->id.device = (prt->address >> 16) & 0xFFFF;
165 entry->pin = prt->pin + 1;
166
167 do_prt_fixups(entry, prt);
168
169 entry->index = prt->source_index;
170
171 /*
172 * Type 1: Dynamic
173 * ---------------
174 * The 'source' field specifies the PCI interrupt link device used to
175 * configure the IRQ assigned to this slot|dev|pin. The 'source_index'
176 * indicates which resource descriptor in the resource template (of
177 * the link device) this interrupt is allocated from.
178 *
179 * NOTE: Don't query the Link Device for IRQ information at this time
180 * because Link Device enumeration may not have occurred yet
181 * (e.g. exists somewhere 'below' this _PRT entry in the ACPI
182 * namespace).
183 */
184 if (prt->source[0])
185 acpi_get_handle(handle, prt->source, &entry->link);
186
187 /*
188 * Type 2: Static
189 * --------------
190 * The 'source' field is NULL, and the 'source_index' field specifies
191 * the IRQ value, which is hardwired to specific interrupt inputs on
192 * the interrupt controller.
193 */
194
195 ACPI_DEBUG_PRINT_RAW((ACPI_DB_INFO,
196 " %04x:%02x:%02x[%c] -> %s[%d]\n",
197 entry->id.segment, entry->id.bus,
198 entry->id.device, pin_name(entry->pin),
199 prt->source, entry->index));
200
201 *entry_ptr = entry;
202
203 return 0;
204}
205
206static int acpi_pci_irq_find_prt_entry(struct pci_dev *dev,
207 int pin, struct acpi_prt_entry **entry_ptr)
208{
209 acpi_status status;
210 struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
211 struct acpi_pci_routing_table *entry;
212 acpi_handle handle = NULL;
213
214 if (dev->bus->bridge)
215 handle = ACPI_HANDLE(dev->bus->bridge);
216
217 if (!handle)
218 return -ENODEV;
219
220 /* 'handle' is the _PRT's parent (root bridge or PCI-PCI bridge) */
221 status = acpi_get_irq_routing_table(handle, &buffer);
222 if (ACPI_FAILURE(status)) {
223 kfree(buffer.pointer);
224 return -ENODEV;
225 }
226
227 entry = buffer.pointer;
228 while (entry && (entry->length > 0)) {
229 if (!acpi_pci_irq_check_entry(handle, dev, pin,
230 entry, entry_ptr))
231 break;
232 entry = (struct acpi_pci_routing_table *)
233 ((unsigned long)entry + entry->length);
234 }
235
236 kfree(buffer.pointer);
237 return 0;
238}
239
240/* --------------------------------------------------------------------------
241 PCI Interrupt Routing Support
242 -------------------------------------------------------------------------- */
243#ifdef CONFIG_X86_IO_APIC
244extern int noioapicquirk;
245extern int noioapicreroute;
246
247static int bridge_has_boot_interrupt_variant(struct pci_bus *bus)
248{
249 struct pci_bus *bus_it;
250
251 for (bus_it = bus ; bus_it ; bus_it = bus_it->parent) {
252 if (!bus_it->self)
253 return 0;
254 if (bus_it->self->irq_reroute_variant)
255 return bus_it->self->irq_reroute_variant;
256 }
257 return 0;
258}
259
260/*
261 * Some chipsets (e.g. Intel 6700PXH) generate a legacy INTx when the IRQ
262 * entry in the chipset's IO-APIC is masked (as, e.g. the RT kernel does
263 * during interrupt handling). When this INTx generation cannot be disabled,
264 * we reroute these interrupts to their legacy equivalent to get rid of
265 * spurious interrupts.
266 */
267static int acpi_reroute_boot_interrupt(struct pci_dev *dev,
268 struct acpi_prt_entry *entry)
269{
270 if (noioapicquirk || noioapicreroute) {
271 return 0;
272 } else {
273 switch (bridge_has_boot_interrupt_variant(dev->bus)) {
274 case 0:
275 /* no rerouting necessary */
276 return 0;
277 case INTEL_IRQ_REROUTE_VARIANT:
278 /*
279 * Remap according to INTx routing table in 6700PXH
280 * specs, intel order number 302628-002, section
281 * 2.15.2. Other chipsets (80332, ...) have the same
282 * mapping and are handled here as well.
283 */
284 dev_info(&dev->dev, "PCI IRQ %d -> rerouted to legacy "
285 "IRQ %d\n", entry->index,
286 (entry->index % 4) + 16);
287 entry->index = (entry->index % 4) + 16;
288 return 1;
289 default:
290 dev_warn(&dev->dev, "Cannot reroute IRQ %d to legacy "
291 "IRQ: unknown mapping\n", entry->index);
292 return -1;
293 }
294 }
295}
296#endif /* CONFIG_X86_IO_APIC */
297
298static struct acpi_prt_entry *acpi_pci_irq_lookup(struct pci_dev *dev, int pin)
299{
300 struct acpi_prt_entry *entry = NULL;
301 struct pci_dev *bridge;
302 u8 bridge_pin, orig_pin = pin;
303 int ret;
304
305 ret = acpi_pci_irq_find_prt_entry(dev, pin, &entry);
306 if (!ret && entry) {
307#ifdef CONFIG_X86_IO_APIC
308 acpi_reroute_boot_interrupt(dev, entry);
309#endif /* CONFIG_X86_IO_APIC */
310 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %s[%c] _PRT entry\n",
311 pci_name(dev), pin_name(pin)));
312 return entry;
313 }
314
315 /*
316 * Attempt to derive an IRQ for this device from a parent bridge's
317 * PCI interrupt routing entry (eg. yenta bridge and add-in card bridge).
318 */
319 bridge = dev->bus->self;
320 while (bridge) {
321 pin = pci_swizzle_interrupt_pin(dev, pin);
322
323 if ((bridge->class >> 8) == PCI_CLASS_BRIDGE_CARDBUS) {
324 /* PC card has the same IRQ as its cardbridge */
325 bridge_pin = bridge->pin;
326 if (!bridge_pin) {
327 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
328 "No interrupt pin configured for device %s\n",
329 pci_name(bridge)));
330 return NULL;
331 }
332 pin = bridge_pin;
333 }
334
335 ret = acpi_pci_irq_find_prt_entry(bridge, pin, &entry);
336 if (!ret && entry) {
337 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
338 "Derived GSI for %s INT %c from %s\n",
339 pci_name(dev), pin_name(orig_pin),
340 pci_name(bridge)));
341 return entry;
342 }
343
344 dev = bridge;
345 bridge = dev->bus->self;
346 }
347
348 dev_warn(&dev->dev, "can't derive routing for PCI INT %c\n",
349 pin_name(orig_pin));
350 return NULL;
351}
352
353#if IS_ENABLED(CONFIG_ISA) || IS_ENABLED(CONFIG_EISA)
354static int acpi_isa_register_gsi(struct pci_dev *dev)
355{
356 u32 dev_gsi;
357
358 /* Interrupt Line values above 0xF are forbidden */
359 if (dev->irq > 0 && (dev->irq <= 0xF) &&
360 acpi_isa_irq_available(dev->irq) &&
361 (acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) {
362 dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n",
363 pin_name(dev->pin), dev->irq);
364 acpi_register_gsi(&dev->dev, dev_gsi,
365 ACPI_LEVEL_SENSITIVE,
366 ACPI_ACTIVE_LOW);
367 return 0;
368 }
369 return -EINVAL;
370}
371#else
372static inline int acpi_isa_register_gsi(struct pci_dev *dev)
373{
374 return -ENODEV;
375}
376#endif
377
378static inline bool acpi_pci_irq_valid(struct pci_dev *dev, u8 pin)
379{
380#ifdef CONFIG_X86
381 /*
382 * On x86 irq line 0xff means "unknown" or "no connection"
383 * (PCI 3.0, Section 6.2.4, footnote on page 223).
384 */
385 if (dev->irq == 0xff) {
386 dev->irq = IRQ_NOTCONNECTED;
387 dev_warn(&dev->dev, "PCI INT %c: not connected\n",
388 pin_name(pin));
389 return false;
390 }
391#endif
392 return true;
393}
394
395int acpi_pci_irq_enable(struct pci_dev *dev)
396{
397 struct acpi_prt_entry *entry;
398 int gsi;
399 u8 pin;
400 int triggering = ACPI_LEVEL_SENSITIVE;
401 /*
402 * On ARM systems with the GIC interrupt model, level interrupts
403 * are always polarity high by specification; PCI legacy
404 * IRQs lines are inverted before reaching the interrupt
405 * controller and must therefore be considered active high
406 * as default.
407 */
408 int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ?
409 ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW;
410 char *link = NULL;
411 char link_desc[16];
412 int rc;
413
414 pin = dev->pin;
415 if (!pin) {
416 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
417 "No interrupt pin configured for device %s\n",
418 pci_name(dev)));
419 return 0;
420 }
421
422 if (dev->irq_managed && dev->irq > 0)
423 return 0;
424
425 entry = acpi_pci_irq_lookup(dev, pin);
426 if (!entry) {
427 /*
428 * IDE legacy mode controller IRQs are magic. Why do compat
429 * extensions always make such a nasty mess.
430 */
431 if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
432 (dev->class & 0x05) == 0)
433 return 0;
434 }
435
436 if (entry) {
437 if (entry->link)
438 gsi = acpi_pci_link_allocate_irq(entry->link,
439 entry->index,
440 &triggering, &polarity,
441 &link);
442 else
443 gsi = entry->index;
444 } else
445 gsi = -1;
446
447 if (gsi < 0) {
448 /*
449 * No IRQ known to the ACPI subsystem - maybe the BIOS /
450 * driver reported one, then use it. Exit in any case.
451 */
452 if (!acpi_pci_irq_valid(dev, pin)) {
453 kfree(entry);
454 return 0;
455 }
456
457 if (acpi_isa_register_gsi(dev))
458 dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
459 pin_name(pin));
460
461 kfree(entry);
462 return 0;
463 }
464
465 rc = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
466 if (rc < 0) {
467 dev_warn(&dev->dev, "PCI INT %c: failed to register GSI\n",
468 pin_name(pin));
469 kfree(entry);
470 return rc;
471 }
472 dev->irq = rc;
473 dev->irq_managed = 1;
474
475 if (link)
476 snprintf(link_desc, sizeof(link_desc), " -> Link[%s]", link);
477 else
478 link_desc[0] = '\0';
479
480 dev_dbg(&dev->dev, "PCI INT %c%s -> GSI %u (%s, %s) -> IRQ %d\n",
481 pin_name(pin), link_desc, gsi,
482 (triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge",
483 (polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq);
484
485 kfree(entry);
486 return 0;
487}
488
489void acpi_pci_irq_disable(struct pci_dev *dev)
490{
491 struct acpi_prt_entry *entry;
492 int gsi;
493 u8 pin;
494
495 pin = dev->pin;
496 if (!pin || !dev->irq_managed || dev->irq <= 0)
497 return;
498
499 /* Keep IOAPIC pin configuration when suspending */
500 if (dev->dev.power.is_prepared)
501 return;
502#ifdef CONFIG_PM
503 if (dev->dev.power.runtime_status == RPM_SUSPENDING)
504 return;
505#endif
506
507 entry = acpi_pci_irq_lookup(dev, pin);
508 if (!entry)
509 return;
510
511 if (entry->link)
512 gsi = acpi_pci_link_free_irq(entry->link);
513 else
514 gsi = entry->index;
515
516 kfree(entry);
517
518 /*
519 * TBD: It might be worth clearing dev->irq by magic constant
520 * (e.g. PCI_UNDEFINED_IRQ).
521 */
522
523 dev_dbg(&dev->dev, "PCI INT %c disabled\n", pin_name(pin));
524 if (gsi >= 0) {
525 acpi_unregister_gsi(gsi);
526 dev->irq_managed = 0;
527 }
528}
1/*
2 * pci_irq.c - ACPI PCI Interrupt Routing ($Revision: 11 $)
3 *
4 * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
5 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
6 * Copyright (C) 2002 Dominik Brodowski <devel@brodo.de>
7 * (c) Copyright 2008 Hewlett-Packard Development Company, L.P.
8 * Bjorn Helgaas <bjorn.helgaas@hp.com>
9 *
10 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or (at
15 * your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful, but
18 * WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
20 * General Public License for more details.
21 *
22 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
23 */
24
25
26#include <linux/dmi.h>
27#include <linux/kernel.h>
28#include <linux/module.h>
29#include <linux/init.h>
30#include <linux/types.h>
31#include <linux/spinlock.h>
32#include <linux/pm.h>
33#include <linux/pci.h>
34#include <linux/acpi.h>
35#include <linux/slab.h>
36#include <linux/interrupt.h>
37
38#define PREFIX "ACPI: "
39
40#define _COMPONENT ACPI_PCI_COMPONENT
41ACPI_MODULE_NAME("pci_irq");
42
43struct acpi_prt_entry {
44 struct acpi_pci_id id;
45 u8 pin;
46 acpi_handle link;
47 u32 index; /* GSI, or link _CRS index */
48};
49
50static inline char pin_name(int pin)
51{
52 return 'A' + pin - 1;
53}
54
55/* --------------------------------------------------------------------------
56 PCI IRQ Routing Table (PRT) Support
57 -------------------------------------------------------------------------- */
58
59/* http://bugzilla.kernel.org/show_bug.cgi?id=4773 */
60static const struct dmi_system_id medion_md9580[] = {
61 {
62 .ident = "Medion MD9580-F laptop",
63 .matches = {
64 DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"),
65 DMI_MATCH(DMI_PRODUCT_NAME, "A555"),
66 },
67 },
68 { }
69};
70
71/* http://bugzilla.kernel.org/show_bug.cgi?id=5044 */
72static const struct dmi_system_id dell_optiplex[] = {
73 {
74 .ident = "Dell Optiplex GX1",
75 .matches = {
76 DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
77 DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX1 600S+"),
78 },
79 },
80 { }
81};
82
83/* http://bugzilla.kernel.org/show_bug.cgi?id=10138 */
84static const struct dmi_system_id hp_t5710[] = {
85 {
86 .ident = "HP t5710",
87 .matches = {
88 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
89 DMI_MATCH(DMI_PRODUCT_NAME, "hp t5000 series"),
90 DMI_MATCH(DMI_BOARD_NAME, "098Ch"),
91 },
92 },
93 { }
94};
95
96struct prt_quirk {
97 const struct dmi_system_id *system;
98 unsigned int segment;
99 unsigned int bus;
100 unsigned int device;
101 unsigned char pin;
102 const char *source; /* according to BIOS */
103 const char *actual_source;
104};
105
106#define PCI_INTX_PIN(c) (c - 'A' + 1)
107
108/*
109 * These systems have incorrect _PRT entries. The BIOS claims the PCI
110 * interrupt at the listed segment/bus/device/pin is connected to the first
111 * link device, but it is actually connected to the second.
112 */
113static const struct prt_quirk prt_quirks[] = {
114 { medion_md9580, 0, 0, 9, PCI_INTX_PIN('A'),
115 "\\_SB_.PCI0.ISA_.LNKA",
116 "\\_SB_.PCI0.ISA_.LNKB"},
117 { dell_optiplex, 0, 0, 0xd, PCI_INTX_PIN('A'),
118 "\\_SB_.LNKB",
119 "\\_SB_.LNKA"},
120 { hp_t5710, 0, 0, 1, PCI_INTX_PIN('A'),
121 "\\_SB_.PCI0.LNK1",
122 "\\_SB_.PCI0.LNK3"},
123};
124
125static void do_prt_fixups(struct acpi_prt_entry *entry,
126 struct acpi_pci_routing_table *prt)
127{
128 int i;
129 const struct prt_quirk *quirk;
130
131 for (i = 0; i < ARRAY_SIZE(prt_quirks); i++) {
132 quirk = &prt_quirks[i];
133
134 /* All current quirks involve link devices, not GSIs */
135 if (dmi_check_system(quirk->system) &&
136 entry->id.segment == quirk->segment &&
137 entry->id.bus == quirk->bus &&
138 entry->id.device == quirk->device &&
139 entry->pin == quirk->pin &&
140 !strcmp(prt->source, quirk->source) &&
141 strlen(prt->source) >= strlen(quirk->actual_source)) {
142 printk(KERN_WARNING PREFIX "firmware reports "
143 "%04x:%02x:%02x PCI INT %c connected to %s; "
144 "changing to %s\n",
145 entry->id.segment, entry->id.bus,
146 entry->id.device, pin_name(entry->pin),
147 prt->source, quirk->actual_source);
148 strcpy(prt->source, quirk->actual_source);
149 }
150 }
151}
152
153static int acpi_pci_irq_check_entry(acpi_handle handle, struct pci_dev *dev,
154 int pin, struct acpi_pci_routing_table *prt,
155 struct acpi_prt_entry **entry_ptr)
156{
157 int segment = pci_domain_nr(dev->bus);
158 int bus = dev->bus->number;
159 int device = pci_ari_enabled(dev->bus) ? 0 : PCI_SLOT(dev->devfn);
160 struct acpi_prt_entry *entry;
161
162 if (((prt->address >> 16) & 0xffff) != device ||
163 prt->pin + 1 != pin)
164 return -ENODEV;
165
166 entry = kzalloc(sizeof(struct acpi_prt_entry), GFP_KERNEL);
167 if (!entry)
168 return -ENOMEM;
169
170 /*
171 * Note that the _PRT uses 0=INTA, 1=INTB, etc, while PCI uses
172 * 1=INTA, 2=INTB. We use the PCI encoding throughout, so convert
173 * it here.
174 */
175 entry->id.segment = segment;
176 entry->id.bus = bus;
177 entry->id.device = (prt->address >> 16) & 0xFFFF;
178 entry->pin = prt->pin + 1;
179
180 do_prt_fixups(entry, prt);
181
182 entry->index = prt->source_index;
183
184 /*
185 * Type 1: Dynamic
186 * ---------------
187 * The 'source' field specifies the PCI interrupt link device used to
188 * configure the IRQ assigned to this slot|dev|pin. The 'source_index'
189 * indicates which resource descriptor in the resource template (of
190 * the link device) this interrupt is allocated from.
191 *
192 * NOTE: Don't query the Link Device for IRQ information at this time
193 * because Link Device enumeration may not have occurred yet
194 * (e.g. exists somewhere 'below' this _PRT entry in the ACPI
195 * namespace).
196 */
197 if (prt->source[0])
198 acpi_get_handle(handle, prt->source, &entry->link);
199
200 /*
201 * Type 2: Static
202 * --------------
203 * The 'source' field is NULL, and the 'source_index' field specifies
204 * the IRQ value, which is hardwired to specific interrupt inputs on
205 * the interrupt controller.
206 */
207
208 ACPI_DEBUG_PRINT_RAW((ACPI_DB_INFO,
209 " %04x:%02x:%02x[%c] -> %s[%d]\n",
210 entry->id.segment, entry->id.bus,
211 entry->id.device, pin_name(entry->pin),
212 prt->source, entry->index));
213
214 *entry_ptr = entry;
215
216 return 0;
217}
218
219static int acpi_pci_irq_find_prt_entry(struct pci_dev *dev,
220 int pin, struct acpi_prt_entry **entry_ptr)
221{
222 acpi_status status;
223 struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
224 struct acpi_pci_routing_table *entry;
225 acpi_handle handle = NULL;
226
227 if (dev->bus->bridge)
228 handle = ACPI_HANDLE(dev->bus->bridge);
229
230 if (!handle)
231 return -ENODEV;
232
233 /* 'handle' is the _PRT's parent (root bridge or PCI-PCI bridge) */
234 status = acpi_get_irq_routing_table(handle, &buffer);
235 if (ACPI_FAILURE(status)) {
236 kfree(buffer.pointer);
237 return -ENODEV;
238 }
239
240 entry = buffer.pointer;
241 while (entry && (entry->length > 0)) {
242 if (!acpi_pci_irq_check_entry(handle, dev, pin,
243 entry, entry_ptr))
244 break;
245 entry = (struct acpi_pci_routing_table *)
246 ((unsigned long)entry + entry->length);
247 }
248
249 kfree(buffer.pointer);
250 return 0;
251}
252
253/* --------------------------------------------------------------------------
254 PCI Interrupt Routing Support
255 -------------------------------------------------------------------------- */
256#ifdef CONFIG_X86_IO_APIC
257extern int noioapicquirk;
258extern int noioapicreroute;
259
260static int bridge_has_boot_interrupt_variant(struct pci_bus *bus)
261{
262 struct pci_bus *bus_it;
263
264 for (bus_it = bus ; bus_it ; bus_it = bus_it->parent) {
265 if (!bus_it->self)
266 return 0;
267 if (bus_it->self->irq_reroute_variant)
268 return bus_it->self->irq_reroute_variant;
269 }
270 return 0;
271}
272
273/*
274 * Some chipsets (e.g. Intel 6700PXH) generate a legacy INTx when the IRQ
275 * entry in the chipset's IO-APIC is masked (as, e.g. the RT kernel does
276 * during interrupt handling). When this INTx generation cannot be disabled,
277 * we reroute these interrupts to their legacy equivalent to get rid of
278 * spurious interrupts.
279 */
280static int acpi_reroute_boot_interrupt(struct pci_dev *dev,
281 struct acpi_prt_entry *entry)
282{
283 if (noioapicquirk || noioapicreroute) {
284 return 0;
285 } else {
286 switch (bridge_has_boot_interrupt_variant(dev->bus)) {
287 case 0:
288 /* no rerouting necessary */
289 return 0;
290 case INTEL_IRQ_REROUTE_VARIANT:
291 /*
292 * Remap according to INTx routing table in 6700PXH
293 * specs, intel order number 302628-002, section
294 * 2.15.2. Other chipsets (80332, ...) have the same
295 * mapping and are handled here as well.
296 */
297 dev_info(&dev->dev, "PCI IRQ %d -> rerouted to legacy "
298 "IRQ %d\n", entry->index,
299 (entry->index % 4) + 16);
300 entry->index = (entry->index % 4) + 16;
301 return 1;
302 default:
303 dev_warn(&dev->dev, "Cannot reroute IRQ %d to legacy "
304 "IRQ: unknown mapping\n", entry->index);
305 return -1;
306 }
307 }
308}
309#endif /* CONFIG_X86_IO_APIC */
310
311static struct acpi_prt_entry *acpi_pci_irq_lookup(struct pci_dev *dev, int pin)
312{
313 struct acpi_prt_entry *entry = NULL;
314 struct pci_dev *bridge;
315 u8 bridge_pin, orig_pin = pin;
316 int ret;
317
318 ret = acpi_pci_irq_find_prt_entry(dev, pin, &entry);
319 if (!ret && entry) {
320#ifdef CONFIG_X86_IO_APIC
321 acpi_reroute_boot_interrupt(dev, entry);
322#endif /* CONFIG_X86_IO_APIC */
323 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %s[%c] _PRT entry\n",
324 pci_name(dev), pin_name(pin)));
325 return entry;
326 }
327
328 /*
329 * Attempt to derive an IRQ for this device from a parent bridge's
330 * PCI interrupt routing entry (eg. yenta bridge and add-in card bridge).
331 */
332 bridge = dev->bus->self;
333 while (bridge) {
334 pin = pci_swizzle_interrupt_pin(dev, pin);
335
336 if ((bridge->class >> 8) == PCI_CLASS_BRIDGE_CARDBUS) {
337 /* PC card has the same IRQ as its cardbridge */
338 bridge_pin = bridge->pin;
339 if (!bridge_pin) {
340 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
341 "No interrupt pin configured for device %s\n",
342 pci_name(bridge)));
343 return NULL;
344 }
345 pin = bridge_pin;
346 }
347
348 ret = acpi_pci_irq_find_prt_entry(bridge, pin, &entry);
349 if (!ret && entry) {
350 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
351 "Derived GSI for %s INT %c from %s\n",
352 pci_name(dev), pin_name(orig_pin),
353 pci_name(bridge)));
354 return entry;
355 }
356
357 dev = bridge;
358 bridge = dev->bus->self;
359 }
360
361 dev_warn(&dev->dev, "can't derive routing for PCI INT %c\n",
362 pin_name(orig_pin));
363 return NULL;
364}
365
366#if IS_ENABLED(CONFIG_ISA) || IS_ENABLED(CONFIG_EISA)
367static int acpi_isa_register_gsi(struct pci_dev *dev)
368{
369 u32 dev_gsi;
370
371 /* Interrupt Line values above 0xF are forbidden */
372 if (dev->irq > 0 && (dev->irq <= 0xF) &&
373 acpi_isa_irq_available(dev->irq) &&
374 (acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) {
375 dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n",
376 pin_name(dev->pin), dev->irq);
377 acpi_register_gsi(&dev->dev, dev_gsi,
378 ACPI_LEVEL_SENSITIVE,
379 ACPI_ACTIVE_LOW);
380 return 0;
381 }
382 return -EINVAL;
383}
384#else
385static inline int acpi_isa_register_gsi(struct pci_dev *dev)
386{
387 return -ENODEV;
388}
389#endif
390
391static inline bool acpi_pci_irq_valid(struct pci_dev *dev, u8 pin)
392{
393#ifdef CONFIG_X86
394 /*
395 * On x86 irq line 0xff means "unknown" or "no connection"
396 * (PCI 3.0, Section 6.2.4, footnote on page 223).
397 */
398 if (dev->irq == 0xff) {
399 dev->irq = IRQ_NOTCONNECTED;
400 dev_warn(&dev->dev, "PCI INT %c: not connected\n",
401 pin_name(pin));
402 return false;
403 }
404#endif
405 return true;
406}
407
408int acpi_pci_irq_enable(struct pci_dev *dev)
409{
410 struct acpi_prt_entry *entry;
411 int gsi;
412 u8 pin;
413 int triggering = ACPI_LEVEL_SENSITIVE;
414 /*
415 * On ARM systems with the GIC interrupt model, level interrupts
416 * are always polarity high by specification; PCI legacy
417 * IRQs lines are inverted before reaching the interrupt
418 * controller and must therefore be considered active high
419 * as default.
420 */
421 int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ?
422 ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW;
423 char *link = NULL;
424 char link_desc[16];
425 int rc;
426
427 pin = dev->pin;
428 if (!pin) {
429 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
430 "No interrupt pin configured for device %s\n",
431 pci_name(dev)));
432 return 0;
433 }
434
435 if (dev->irq_managed && dev->irq > 0)
436 return 0;
437
438 entry = acpi_pci_irq_lookup(dev, pin);
439 if (!entry) {
440 /*
441 * IDE legacy mode controller IRQs are magic. Why do compat
442 * extensions always make such a nasty mess.
443 */
444 if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
445 (dev->class & 0x05) == 0)
446 return 0;
447 }
448
449 if (entry) {
450 if (entry->link)
451 gsi = acpi_pci_link_allocate_irq(entry->link,
452 entry->index,
453 &triggering, &polarity,
454 &link);
455 else
456 gsi = entry->index;
457 } else
458 gsi = -1;
459
460 if (gsi < 0) {
461 /*
462 * No IRQ known to the ACPI subsystem - maybe the BIOS /
463 * driver reported one, then use it. Exit in any case.
464 */
465 if (!acpi_pci_irq_valid(dev, pin))
466 return 0;
467
468 if (acpi_isa_register_gsi(dev))
469 dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
470 pin_name(pin));
471
472 kfree(entry);
473 return 0;
474 }
475
476 rc = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
477 if (rc < 0) {
478 dev_warn(&dev->dev, "PCI INT %c: failed to register GSI\n",
479 pin_name(pin));
480 kfree(entry);
481 return rc;
482 }
483 dev->irq = rc;
484 dev->irq_managed = 1;
485
486 if (link)
487 snprintf(link_desc, sizeof(link_desc), " -> Link[%s]", link);
488 else
489 link_desc[0] = '\0';
490
491 dev_dbg(&dev->dev, "PCI INT %c%s -> GSI %u (%s, %s) -> IRQ %d\n",
492 pin_name(pin), link_desc, gsi,
493 (triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge",
494 (polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq);
495
496 kfree(entry);
497 return 0;
498}
499
500void acpi_pci_irq_disable(struct pci_dev *dev)
501{
502 struct acpi_prt_entry *entry;
503 int gsi;
504 u8 pin;
505
506 pin = dev->pin;
507 if (!pin || !dev->irq_managed || dev->irq <= 0)
508 return;
509
510 /* Keep IOAPIC pin configuration when suspending */
511 if (dev->dev.power.is_prepared)
512 return;
513#ifdef CONFIG_PM
514 if (dev->dev.power.runtime_status == RPM_SUSPENDING)
515 return;
516#endif
517
518 entry = acpi_pci_irq_lookup(dev, pin);
519 if (!entry)
520 return;
521
522 if (entry->link)
523 gsi = acpi_pci_link_free_irq(entry->link);
524 else
525 gsi = entry->index;
526
527 kfree(entry);
528
529 /*
530 * TBD: It might be worth clearing dev->irq by magic constant
531 * (e.g. PCI_UNDEFINED_IRQ).
532 */
533
534 dev_dbg(&dev->dev, "PCI INT %c disabled\n", pin_name(pin));
535 if (gsi >= 0) {
536 acpi_unregister_gsi(gsi);
537 dev->irq_managed = 0;
538 }
539}