1# SPDX-License-Identifier: GPL-2.0
  2#
  3# PCI configuration
  4#
  5
  6# select this to offer the PCI prompt
  7config HAVE_PCI
  8	bool
  9
 10# select this to unconditionally force on PCI support
 11config FORCE_PCI
 12	bool
 13	select HAVE_PCI
 14	select PCI
 15
 16menuconfig PCI
 17	bool "PCI support"
 18	depends on HAVE_PCI
 19	help
 20	  This option enables support for the PCI local bus, including
 21	  support for PCI-X and the foundations for PCI Express support.
 22	  Say 'Y' here unless you know what you are doing.
 23
 24if PCI
 25
 26config PCI_DOMAINS
 27	bool
 28	depends on PCI
 29
 30config PCI_DOMAINS_GENERIC
 31	bool
 32	select PCI_DOMAINS
 33
 34config PCI_SYSCALL
 35	bool
 36
 37source "drivers/pci/pcie/Kconfig"
 38
 39config PCI_MSI
 40	bool "Message Signaled Interrupts (MSI and MSI-X)"
 
 41	select GENERIC_MSI_IRQ
 42	help
 43	   This allows device drivers to enable MSI (Message Signaled
 44	   Interrupts).  Message Signaled Interrupts enable a device to
 45	   generate an interrupt using an inbound Memory Write on its
 46	   PCI bus instead of asserting a device IRQ pin.
 47
 48	   Use of PCI MSI interrupts can be disabled at kernel boot time
 49	   by using the 'pci=nomsi' option.  This disables MSI for the
 50	   entire system.
 51
 52	   If you don't know what to do here, say Y.
 53
 54config PCI_MSI_IRQ_DOMAIN
 55	def_bool y
 56	depends on PCI_MSI
 57	select GENERIC_MSI_IRQ_DOMAIN
 58
 59config PCI_QUIRKS
 60	default y
 61	bool "Enable PCI quirk workarounds" if EXPERT
 62	help
 63	  This enables workarounds for various PCI chipset bugs/quirks.
 64	  Disable this only if your target machine is unaffected by PCI
 65	  quirks.
 66
 67config PCI_DEBUG
 68	bool "PCI Debugging"
 69	depends on DEBUG_KERNEL
 70	help
 71	  Say Y here if you want the PCI core to produce a bunch of debug
 72	  messages to the system log.  Select this if you are having a
 73	  problem with PCI support and want to see more of what is going on.
 74
 75	  When in doubt, say N.
 76
 77config PCI_REALLOC_ENABLE_AUTO
 78	bool "Enable PCI resource re-allocation detection"
 79	depends on PCI_IOV
 80	help
 81	  Say Y here if you want the PCI core to detect if PCI resource
 82	  re-allocation needs to be enabled. You can always use pci=realloc=on
 83	  or pci=realloc=off to override it.  It will automatically
 84	  re-allocate PCI resources if SR-IOV BARs have not been allocated by
 85	  the BIOS.
 
 86
 87	  When in doubt, say N.
 88
 89config PCI_STUB
 90	tristate "PCI Stub driver"
 
 91	help
 92	  Say Y or M here if you want be able to reserve a PCI device
 93	  when it is going to be assigned to a guest operating system.
 94
 95	  When in doubt, say N.
 96
 97config PCI_PF_STUB
 98	tristate "PCI PF Stub driver"
 99	depends on PCI_IOV
100	help
101	  Say Y or M here if you want to enable support for devices that
102	  require SR-IOV support, while at the same time the PF (Physical
103	  Function) itself is not providing any actual services on the
104	  host itself such as storage or networking.
105
106	  When in doubt, say N.
107
108config XEN_PCIDEV_FRONTEND
109	tristate "Xen PCI Frontend"
110	depends on X86 && XEN
111	select PCI_XEN
112	select XEN_XENBUS_FRONTEND
 
 
 
 
 
 
 
113	default y
 
114	help
115	  The PCI device frontend driver allows the kernel to import arbitrary
116	  PCI devices from a PCI backend to support PCI driver domains.
 
117
118config PCI_ATS
119	bool
120
121config PCI_ECAM
122	bool
123
124config PCI_LOCKLESS_CONFIG
125	bool
126
127config PCI_BRIDGE_EMUL
128	bool
129
130config PCI_IOV
131	bool "PCI IOV support"
 
132	select PCI_ATS
133	help
134	  I/O Virtualization is a PCI feature supported by some devices
135	  which allows them to create virtual devices which share their
136	  physical resources.
137
138	  If unsure, say N.
139
140config PCI_PRI
141	bool "PCI PRI support"
 
142	select PCI_ATS
143	help
144	  PRI is the PCI Page Request Interface. It allows PCI devices that are
145	  behind an IOMMU to recover from page faults.
146
147	  If unsure, say N.
148
149config PCI_PASID
150	bool "PCI PASID support"
 
151	select PCI_ATS
152	help
153	  Process Address Space Identifiers (PASIDs) can be used by PCI devices
154	  to access more than one IO address space at the same time. To make
155	  use of this feature an IOMMU is required which also supports PASIDs.
156	  Select this option if you have such an IOMMU and want to compile the
157	  driver for it into your kernel.
158
159	  If unsure, say N.
160
161config PCI_P2PDMA
162	bool "PCI peer-to-peer transfer support"
163	depends on ZONE_DEVICE
164	select GENERIC_ALLOCATOR
165	help
166	  Enableѕ drivers to do PCI peer-to-peer transactions to and from
167	  BARs that are exposed in other devices that are the part of
168	  the hierarchy where peer-to-peer DMA is guaranteed by the PCI
169	  specification to work (ie. anything below a single PCI bridge).
170
171	  Many PCIe root complexes do not support P2P transactions and
172	  it's hard to tell which support it at all, so at this time,
173	  P2P DMA transactions must be between devices behind the same root
174	  port.
175
176	  If unsure, say N.
177
178config PCI_LABEL
179	def_bool y if (DMI || ACPI)
180	select NLS
181
182config PCI_HYPERV
183	tristate "Hyper-V PCI Frontend"
184	depends on X86_64 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && SYSFS
185	select PCI_HYPERV_INTERFACE
186	help
187	  The PCI device frontend driver allows the kernel to import arbitrary
188	  PCI devices from a PCI backend to support PCI driver domains.
189
190source "drivers/pci/hotplug/Kconfig"
191source "drivers/pci/controller/Kconfig"
192source "drivers/pci/endpoint/Kconfig"
193source "drivers/pci/switch/Kconfig"
194
195endif

 
  1#
  2# PCI configuration
  3#
  4
  5source "drivers/pci/pcie/Kconfig"
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  6
  7config PCI_BUS_ADDR_T_64BIT
  8	def_bool y if (ARCH_DMA_ADDR_T_64BIT || 64BIT)
  9	depends on PCI
 10
 
 
 
 
 
 
 
 
 
 11config PCI_MSI
 12	bool "Message Signaled Interrupts (MSI and MSI-X)"
 13	depends on PCI
 14	select GENERIC_MSI_IRQ
 15	help
 16	   This allows device drivers to enable MSI (Message Signaled
 17	   Interrupts).  Message Signaled Interrupts enable a device to
 18	   generate an interrupt using an inbound Memory Write on its
 19	   PCI bus instead of asserting a device IRQ pin.
 20
 21	   Use of PCI MSI interrupts can be disabled at kernel boot time
 22	   by using the 'pci=nomsi' option.  This disables MSI for the
 23	   entire system.
 24
 25	   If you don't know what to do here, say Y.
 26
 27config PCI_MSI_IRQ_DOMAIN
 28	def_bool ARC || ARM || ARM64 || X86
 29	depends on PCI_MSI
 30	select GENERIC_MSI_IRQ_DOMAIN
 31
 
 
 
 
 
 
 
 
 32config PCI_DEBUG
 33	bool "PCI Debugging"
 34	depends on PCI && DEBUG_KERNEL
 35	help
 36	  Say Y here if you want the PCI core to produce a bunch of debug
 37	  messages to the system log.  Select this if you are having a
 38	  problem with PCI support and want to see more of what is going on.
 39
 40	  When in doubt, say N.
 41
 42config PCI_REALLOC_ENABLE_AUTO
 43	bool "Enable PCI resource re-allocation detection"
 44	depends on PCI
 45	help
 46	  Say Y here if you want the PCI core to detect if PCI resource
 47	  re-allocation needs to be enabled. You can always use pci=realloc=on
 48          or pci=realloc=off to override it.  Note this feature is a no-op
 49          unless PCI_IOV support is also enabled; in that case it will
 50          automatically re-allocate PCI resources if SR-IOV BARs have not
 51          been allocated by the BIOS.
 52
 53	  When in doubt, say N.
 54
 55config PCI_STUB
 56	tristate "PCI Stub driver"
 57	depends on PCI
 58	help
 59	  Say Y or M here if you want be able to reserve a PCI device
 60	  when it is going to be assigned to a guest operating system.
 61
 62	  When in doubt, say N.
 63
 
 
 
 
 
 
 
 
 
 
 
 64config XEN_PCIDEV_FRONTEND
 65        tristate "Xen PCI Frontend"
 66        depends on PCI && X86 && XEN
 67        select PCI_XEN
 68	select XEN_XENBUS_FRONTEND
 69        default y
 70        help
 71          The PCI device frontend driver allows the kernel to import arbitrary
 72          PCI devices from a PCI backend to support PCI driver domains.
 73
 74config HT_IRQ
 75	bool "Interrupts on hypertransport devices"
 76	default y
 77	depends on PCI && X86_LOCAL_APIC
 78	help
 79	   This allows native hypertransport devices to use interrupts.
 80
 81	   If unsure say Y.
 82
 83config PCI_ATS
 84	bool
 85
 86config PCI_ECAM
 87	bool
 88
 
 
 
 
 
 
 89config PCI_IOV
 90	bool "PCI IOV support"
 91	depends on PCI
 92	select PCI_ATS
 93	help
 94	  I/O Virtualization is a PCI feature supported by some devices
 95	  which allows them to create virtual devices which share their
 96	  physical resources.
 97
 98	  If unsure, say N.
 99
100config PCI_PRI
101	bool "PCI PRI support"
102	depends on PCI
103	select PCI_ATS
104	help
105	  PRI is the PCI Page Request Interface. It allows PCI devices that are
106	  behind an IOMMU to recover from page faults.
107
108	  If unsure, say N.
109
110config PCI_PASID
111	bool "PCI PASID support"
112	depends on PCI
113	select PCI_ATS
114	help
115	  Process Address Space Identifiers (PASIDs) can be used by PCI devices
116	  to access more than one IO address space at the same time. To make
117	  use of this feature an IOMMU is required which also supports PASIDs.
118	  Select this option if you have such an IOMMU and want to compile the
119	  driver for it into your kernel.
120
121	  If unsure, say N.
122
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
123config PCI_LABEL
124	def_bool y if (DMI || ACPI)
125	select NLS
126
127config PCI_HYPERV
128        tristate "Hyper-V PCI Frontend"
129        depends on PCI && X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
130        help
131          The PCI device frontend driver allows the kernel to import arbitrary
132          PCI devices from a PCI backend to support PCI driver domains.
 
133
134source "drivers/pci/hotplug/Kconfig"
135source "drivers/pci/host/Kconfig"