Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2012 Texas Instruments
4 * Author: Rob Clark <robdclark@gmail.com>
5 */
6
7#include <linux/delay.h>
8#include <linux/dma-mapping.h>
9#include <linux/of_graph.h>
10#include <linux/pm_runtime.h>
11
12#include <drm/drm_atomic.h>
13#include <drm/drm_atomic_helper.h>
14#include <drm/drm_crtc.h>
15#include <drm/drm_fb_cma_helper.h>
16#include <drm/drm_fourcc.h>
17#include <drm/drm_gem_cma_helper.h>
18#include <drm/drm_modeset_helper_vtables.h>
19#include <drm/drm_print.h>
20#include <drm/drm_vblank.h>
21
22#include "tilcdc_drv.h"
23#include "tilcdc_regs.h"
24
25#define TILCDC_VBLANK_SAFETY_THRESHOLD_US 1000
26#define TILCDC_PALETTE_SIZE 32
27#define TILCDC_PALETTE_FIRST_ENTRY 0x4000
28
29struct tilcdc_crtc {
30 struct drm_crtc base;
31
32 struct drm_plane primary;
33 const struct tilcdc_panel_info *info;
34 struct drm_pending_vblank_event *event;
35 struct mutex enable_lock;
36 bool enabled;
37 bool shutdown;
38 wait_queue_head_t frame_done_wq;
39 bool frame_done;
40 spinlock_t irq_lock;
41
42 unsigned int lcd_fck_rate;
43
44 ktime_t last_vblank;
45 unsigned int hvtotal_us;
46
47 struct drm_framebuffer *next_fb;
48
49 /* Only set if an external encoder is connected */
50 bool simulate_vesa_sync;
51
52 int sync_lost_count;
53 bool frame_intact;
54 struct work_struct recover_work;
55
56 dma_addr_t palette_dma_handle;
57 u16 *palette_base;
58 struct completion palette_loaded;
59};
60#define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base)
61
62static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb)
63{
64 struct drm_device *dev = crtc->dev;
65 struct tilcdc_drm_private *priv = dev->dev_private;
66 struct drm_gem_cma_object *gem;
67 dma_addr_t start, end;
68 u64 dma_base_and_ceiling;
69
70 gem = drm_fb_cma_get_gem_obj(fb, 0);
71
72 start = gem->paddr + fb->offsets[0] +
73 crtc->y * fb->pitches[0] +
74 crtc->x * fb->format->cpp[0];
75
76 end = start + (crtc->mode.vdisplay * fb->pitches[0]);
77
78 /* Write LCDC_DMA_FB_BASE_ADDR_0_REG and LCDC_DMA_FB_CEILING_ADDR_0_REG
79 * with a single insruction, if available. This should make it more
80 * unlikely that LCDC would fetch the DMA addresses in the middle of
81 * an update.
82 */
83 if (priv->rev == 1)
84 end -= 1;
85
86 dma_base_and_ceiling = (u64)end << 32 | start;
87 tilcdc_write64(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, dma_base_and_ceiling);
88}
89
90/*
91 * The driver currently only supports only true color formats. For
92 * true color the palette block is bypassed, but a 32 byte palette
93 * should still be loaded. The first 16-bit entry must be 0x4000 while
94 * all other entries must be zeroed.
95 */
96static void tilcdc_crtc_load_palette(struct drm_crtc *crtc)
97{
98 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
99 struct drm_device *dev = crtc->dev;
100 struct tilcdc_drm_private *priv = dev->dev_private;
101 int ret;
102
103 reinit_completion(&tilcdc_crtc->palette_loaded);
104
105 /* Tell the LCDC where the palette is located. */
106 tilcdc_write(dev, LCDC_DMA_FB_BASE_ADDR_0_REG,
107 tilcdc_crtc->palette_dma_handle);
108 tilcdc_write(dev, LCDC_DMA_FB_CEILING_ADDR_0_REG,
109 (u32) tilcdc_crtc->palette_dma_handle +
110 TILCDC_PALETTE_SIZE - 1);
111
112 /* Set dma load mode for palette loading only. */
113 tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG,
114 LCDC_PALETTE_LOAD_MODE(PALETTE_ONLY),
115 LCDC_PALETTE_LOAD_MODE_MASK);
116
117 /* Enable DMA Palette Loaded Interrupt */
118 if (priv->rev == 1)
119 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA);
120 else
121 tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_V2_PL_INT_ENA);
122
123 /* Enable LCDC DMA and wait for palette to be loaded. */
124 tilcdc_clear_irqstatus(dev, 0xffffffff);
125 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
126
127 ret = wait_for_completion_timeout(&tilcdc_crtc->palette_loaded,
128 msecs_to_jiffies(50));
129 if (ret == 0)
130 dev_err(dev->dev, "%s: Palette loading timeout", __func__);
131
132 /* Disable LCDC DMA and DMA Palette Loaded Interrupt. */
133 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
134 if (priv->rev == 1)
135 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA);
136 else
137 tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, LCDC_V2_PL_INT_ENA);
138}
139
140static void tilcdc_crtc_enable_irqs(struct drm_device *dev)
141{
142 struct tilcdc_drm_private *priv = dev->dev_private;
143
144 tilcdc_clear_irqstatus(dev, 0xffffffff);
145
146 if (priv->rev == 1) {
147 tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
148 LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA |
149 LCDC_V1_UNDERFLOW_INT_ENA);
150 tilcdc_set(dev, LCDC_DMA_CTRL_REG,
151 LCDC_V1_END_OF_FRAME_INT_ENA);
152 } else {
153 tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG,
154 LCDC_V2_UNDERFLOW_INT_ENA |
155 LCDC_V2_END_OF_FRAME0_INT_ENA |
156 LCDC_FRAME_DONE | LCDC_SYNC_LOST);
157 }
158}
159
160static void tilcdc_crtc_disable_irqs(struct drm_device *dev)
161{
162 struct tilcdc_drm_private *priv = dev->dev_private;
163
164 /* disable irqs that we might have enabled: */
165 if (priv->rev == 1) {
166 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
167 LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA |
168 LCDC_V1_UNDERFLOW_INT_ENA | LCDC_V1_PL_INT_ENA);
169 tilcdc_clear(dev, LCDC_DMA_CTRL_REG,
170 LCDC_V1_END_OF_FRAME_INT_ENA);
171 } else {
172 tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
173 LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA |
174 LCDC_V2_END_OF_FRAME0_INT_ENA |
175 LCDC_FRAME_DONE | LCDC_SYNC_LOST);
176 }
177}
178
179static void reset(struct drm_crtc *crtc)
180{
181 struct drm_device *dev = crtc->dev;
182 struct tilcdc_drm_private *priv = dev->dev_private;
183
184 if (priv->rev != 2)
185 return;
186
187 tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
188 usleep_range(250, 1000);
189 tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
190}
191
192/*
193 * Calculate the percentage difference between the requested pixel clock rate
194 * and the effective rate resulting from calculating the clock divider value.
195 */
196static unsigned int tilcdc_pclk_diff(unsigned long rate,
197 unsigned long real_rate)
198{
199 int r = rate / 100, rr = real_rate / 100;
200
201 return (unsigned int)(abs(((rr - r) * 100) / r));
202}
203
204static void tilcdc_crtc_set_clk(struct drm_crtc *crtc)
205{
206 struct drm_device *dev = crtc->dev;
207 struct tilcdc_drm_private *priv = dev->dev_private;
208 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
209 unsigned long clk_rate, real_rate, req_rate;
210 unsigned int clkdiv;
211 int ret;
212
213 clkdiv = 2; /* first try using a standard divider of 2 */
214
215 /* mode.clock is in KHz, set_rate wants parameter in Hz */
216 req_rate = crtc->mode.clock * 1000;
217
218 ret = clk_set_rate(priv->clk, req_rate * clkdiv);
219 clk_rate = clk_get_rate(priv->clk);
220 if (ret < 0 || tilcdc_pclk_diff(req_rate, clk_rate) > 5) {
221 /*
222 * If we fail to set the clock rate (some architectures don't
223 * use the common clock framework yet and may not implement
224 * all the clk API calls for every clock), try the next best
225 * thing: adjusting the clock divider, unless clk_get_rate()
226 * failed as well.
227 */
228 if (!clk_rate) {
229 /* Nothing more we can do. Just bail out. */
230 dev_err(dev->dev,
231 "failed to set the pixel clock - unable to read current lcdc clock rate\n");
232 return;
233 }
234
235 clkdiv = DIV_ROUND_CLOSEST(clk_rate, req_rate);
236
237 /*
238 * Emit a warning if the real clock rate resulting from the
239 * calculated divider differs much from the requested rate.
240 *
241 * 5% is an arbitrary value - LCDs are usually quite tolerant
242 * about pixel clock rates.
243 */
244 real_rate = clkdiv * req_rate;
245
246 if (tilcdc_pclk_diff(clk_rate, real_rate) > 5) {
247 dev_warn(dev->dev,
248 "effective pixel clock rate (%luHz) differs from the calculated rate (%luHz)\n",
249 clk_rate, real_rate);
250 }
251 }
252
253 tilcdc_crtc->lcd_fck_rate = clk_rate;
254
255 DBG("lcd_clk=%u, mode clock=%d, div=%u",
256 tilcdc_crtc->lcd_fck_rate, crtc->mode.clock, clkdiv);
257
258 /* Configure the LCD clock divisor. */
259 tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(clkdiv) |
260 LCDC_RASTER_MODE);
261
262 if (priv->rev == 2)
263 tilcdc_set(dev, LCDC_CLK_ENABLE_REG,
264 LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN |
265 LCDC_V2_CORE_CLK_EN);
266}
267
268static uint tilcdc_mode_hvtotal(const struct drm_display_mode *mode)
269{
270 return (uint) div_u64(1000llu * mode->htotal * mode->vtotal,
271 mode->clock);
272}
273
274static void tilcdc_crtc_set_mode(struct drm_crtc *crtc)
275{
276 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
277 struct drm_device *dev = crtc->dev;
278 struct tilcdc_drm_private *priv = dev->dev_private;
279 const struct tilcdc_panel_info *info = tilcdc_crtc->info;
280 uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw;
281 struct drm_display_mode *mode = &crtc->state->adjusted_mode;
282 struct drm_framebuffer *fb = crtc->primary->state->fb;
283
284 if (WARN_ON(!info))
285 return;
286
287 if (WARN_ON(!fb))
288 return;
289
290 /* Configure the Burst Size and fifo threshold of DMA: */
291 reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770;
292 switch (info->dma_burst_sz) {
293 case 1:
294 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1);
295 break;
296 case 2:
297 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2);
298 break;
299 case 4:
300 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4);
301 break;
302 case 8:
303 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8);
304 break;
305 case 16:
306 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16);
307 break;
308 default:
309 dev_err(dev->dev, "invalid burst size\n");
310 return;
311 }
312 reg |= (info->fifo_th << 8);
313 tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg);
314
315 /* Configure timings: */
316 hbp = mode->htotal - mode->hsync_end;
317 hfp = mode->hsync_start - mode->hdisplay;
318 hsw = mode->hsync_end - mode->hsync_start;
319 vbp = mode->vtotal - mode->vsync_end;
320 vfp = mode->vsync_start - mode->vdisplay;
321 vsw = mode->vsync_end - mode->vsync_start;
322
323 DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
324 mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
325
326 /* Set AC Bias Period and Number of Transitions per Interrupt: */
327 reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00;
328 reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) |
329 LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt);
330
331 /*
332 * subtract one from hfp, hbp, hsw because the hardware uses
333 * a value of 0 as 1
334 */
335 if (priv->rev == 2) {
336 /* clear bits we're going to set */
337 reg &= ~0x78000033;
338 reg |= ((hfp-1) & 0x300) >> 8;
339 reg |= ((hbp-1) & 0x300) >> 4;
340 reg |= ((hsw-1) & 0x3c0) << 21;
341 }
342 tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg);
343
344 reg = (((mode->hdisplay >> 4) - 1) << 4) |
345 (((hbp-1) & 0xff) << 24) |
346 (((hfp-1) & 0xff) << 16) |
347 (((hsw-1) & 0x3f) << 10);
348 if (priv->rev == 2)
349 reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3;
350 tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg);
351
352 reg = ((mode->vdisplay - 1) & 0x3ff) |
353 ((vbp & 0xff) << 24) |
354 ((vfp & 0xff) << 16) |
355 (((vsw-1) & 0x3f) << 10);
356 tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg);
357
358 /*
359 * be sure to set Bit 10 for the V2 LCDC controller,
360 * otherwise limited to 1024 pixels width, stopping
361 * 1920x1080 being supported.
362 */
363 if (priv->rev == 2) {
364 if ((mode->vdisplay - 1) & 0x400) {
365 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG,
366 LCDC_LPP_B10);
367 } else {
368 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG,
369 LCDC_LPP_B10);
370 }
371 }
372
373 /* Configure display type: */
374 reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) &
375 ~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE |
376 LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK |
377 0x000ff000 /* Palette Loading Delay bits */);
378 reg |= LCDC_TFT_MODE; /* no monochrome/passive support */
379 if (info->tft_alt_mode)
380 reg |= LCDC_TFT_ALT_ENABLE;
381 if (priv->rev == 2) {
382 switch (fb->format->format) {
383 case DRM_FORMAT_BGR565:
384 case DRM_FORMAT_RGB565:
385 break;
386 case DRM_FORMAT_XBGR8888:
387 case DRM_FORMAT_XRGB8888:
388 reg |= LCDC_V2_TFT_24BPP_UNPACK;
389 fallthrough;
390 case DRM_FORMAT_BGR888:
391 case DRM_FORMAT_RGB888:
392 reg |= LCDC_V2_TFT_24BPP_MODE;
393 break;
394 default:
395 dev_err(dev->dev, "invalid pixel format\n");
396 return;
397 }
398 }
399 reg |= info->fdd < 12;
400 tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg);
401
402 if (info->invert_pxl_clk)
403 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
404 else
405 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
406
407 if (info->sync_ctrl)
408 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
409 else
410 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
411
412 if (info->sync_edge)
413 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
414 else
415 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
416
417 if (mode->flags & DRM_MODE_FLAG_NHSYNC)
418 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
419 else
420 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
421
422 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
423 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
424 else
425 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
426
427 if (info->raster_order)
428 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
429 else
430 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
431
432 tilcdc_crtc_set_clk(crtc);
433
434 tilcdc_crtc_load_palette(crtc);
435
436 set_scanout(crtc, fb);
437
438 crtc->hwmode = crtc->state->adjusted_mode;
439
440 tilcdc_crtc->hvtotal_us =
441 tilcdc_mode_hvtotal(&crtc->hwmode);
442}
443
444static void tilcdc_crtc_enable(struct drm_crtc *crtc)
445{
446 struct drm_device *dev = crtc->dev;
447 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
448 unsigned long flags;
449
450 mutex_lock(&tilcdc_crtc->enable_lock);
451 if (tilcdc_crtc->enabled || tilcdc_crtc->shutdown) {
452 mutex_unlock(&tilcdc_crtc->enable_lock);
453 return;
454 }
455
456 pm_runtime_get_sync(dev->dev);
457
458 reset(crtc);
459
460 tilcdc_crtc_set_mode(crtc);
461
462 tilcdc_crtc_enable_irqs(dev);
463
464 tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE);
465 tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG,
466 LCDC_PALETTE_LOAD_MODE(DATA_ONLY),
467 LCDC_PALETTE_LOAD_MODE_MASK);
468
469 /* There is no real chance for a race here as the time stamp
470 * is taken before the raster DMA is started. The spin-lock is
471 * taken to have a memory barrier after taking the time-stamp
472 * and to avoid a context switch between taking the stamp and
473 * enabling the raster.
474 */
475 spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
476 tilcdc_crtc->last_vblank = ktime_get();
477 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
478 spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
479
480 drm_crtc_vblank_on(crtc);
481
482 tilcdc_crtc->enabled = true;
483 mutex_unlock(&tilcdc_crtc->enable_lock);
484}
485
486static void tilcdc_crtc_atomic_enable(struct drm_crtc *crtc,
487 struct drm_crtc_state *old_state)
488{
489 tilcdc_crtc_enable(crtc);
490}
491
492static void tilcdc_crtc_off(struct drm_crtc *crtc, bool shutdown)
493{
494 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
495 struct drm_device *dev = crtc->dev;
496 int ret;
497
498 mutex_lock(&tilcdc_crtc->enable_lock);
499 if (shutdown)
500 tilcdc_crtc->shutdown = true;
501 if (!tilcdc_crtc->enabled) {
502 mutex_unlock(&tilcdc_crtc->enable_lock);
503 return;
504 }
505 tilcdc_crtc->frame_done = false;
506 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
507
508 /*
509 * Wait for framedone irq which will still come before putting
510 * things to sleep..
511 */
512 ret = wait_event_timeout(tilcdc_crtc->frame_done_wq,
513 tilcdc_crtc->frame_done,
514 msecs_to_jiffies(500));
515 if (ret == 0)
516 dev_err(dev->dev, "%s: timeout waiting for framedone\n",
517 __func__);
518
519 drm_crtc_vblank_off(crtc);
520
521 tilcdc_crtc_disable_irqs(dev);
522
523 pm_runtime_put_sync(dev->dev);
524
525 tilcdc_crtc->enabled = false;
526 mutex_unlock(&tilcdc_crtc->enable_lock);
527}
528
529static void tilcdc_crtc_disable(struct drm_crtc *crtc)
530{
531 tilcdc_crtc_off(crtc, false);
532}
533
534static void tilcdc_crtc_atomic_disable(struct drm_crtc *crtc,
535 struct drm_crtc_state *old_state)
536{
537 tilcdc_crtc_disable(crtc);
538}
539
540static void tilcdc_crtc_atomic_flush(struct drm_crtc *crtc,
541 struct drm_crtc_state *old_state)
542{
543 if (!crtc->state->event)
544 return;
545
546 spin_lock_irq(&crtc->dev->event_lock);
547 drm_crtc_send_vblank_event(crtc, crtc->state->event);
548 crtc->state->event = NULL;
549 spin_unlock_irq(&crtc->dev->event_lock);
550}
551
552void tilcdc_crtc_shutdown(struct drm_crtc *crtc)
553{
554 tilcdc_crtc_off(crtc, true);
555}
556
557static bool tilcdc_crtc_is_on(struct drm_crtc *crtc)
558{
559 return crtc->state && crtc->state->enable && crtc->state->active;
560}
561
562static void tilcdc_crtc_recover_work(struct work_struct *work)
563{
564 struct tilcdc_crtc *tilcdc_crtc =
565 container_of(work, struct tilcdc_crtc, recover_work);
566 struct drm_crtc *crtc = &tilcdc_crtc->base;
567
568 dev_info(crtc->dev->dev, "%s: Reset CRTC", __func__);
569
570 drm_modeset_lock(&crtc->mutex, NULL);
571
572 if (!tilcdc_crtc_is_on(crtc))
573 goto out;
574
575 tilcdc_crtc_disable(crtc);
576 tilcdc_crtc_enable(crtc);
577out:
578 drm_modeset_unlock(&crtc->mutex);
579}
580
581static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
582{
583 struct tilcdc_drm_private *priv = crtc->dev->dev_private;
584
585 tilcdc_crtc_shutdown(crtc);
586
587 flush_workqueue(priv->wq);
588
589 of_node_put(crtc->port);
590 drm_crtc_cleanup(crtc);
591}
592
593int tilcdc_crtc_update_fb(struct drm_crtc *crtc,
594 struct drm_framebuffer *fb,
595 struct drm_pending_vblank_event *event)
596{
597 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
598 struct drm_device *dev = crtc->dev;
599
600 if (tilcdc_crtc->event) {
601 dev_err(dev->dev, "already pending page flip!\n");
602 return -EBUSY;
603 }
604
605 tilcdc_crtc->event = event;
606
607 mutex_lock(&tilcdc_crtc->enable_lock);
608
609 if (tilcdc_crtc->enabled) {
610 unsigned long flags;
611 ktime_t next_vblank;
612 s64 tdiff;
613
614 spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
615
616 next_vblank = ktime_add_us(tilcdc_crtc->last_vblank,
617 tilcdc_crtc->hvtotal_us);
618 tdiff = ktime_to_us(ktime_sub(next_vblank, ktime_get()));
619
620 if (tdiff < TILCDC_VBLANK_SAFETY_THRESHOLD_US)
621 tilcdc_crtc->next_fb = fb;
622 else
623 set_scanout(crtc, fb);
624
625 spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
626 }
627
628 mutex_unlock(&tilcdc_crtc->enable_lock);
629
630 return 0;
631}
632
633static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc,
634 const struct drm_display_mode *mode,
635 struct drm_display_mode *adjusted_mode)
636{
637 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
638
639 if (!tilcdc_crtc->simulate_vesa_sync)
640 return true;
641
642 /*
643 * tilcdc does not generate VESA-compliant sync but aligns
644 * VS on the second edge of HS instead of first edge.
645 * We use adjusted_mode, to fixup sync by aligning both rising
646 * edges and add HSKEW offset to fix the sync.
647 */
648 adjusted_mode->hskew = mode->hsync_end - mode->hsync_start;
649 adjusted_mode->flags |= DRM_MODE_FLAG_HSKEW;
650
651 if (mode->flags & DRM_MODE_FLAG_NHSYNC) {
652 adjusted_mode->flags |= DRM_MODE_FLAG_PHSYNC;
653 adjusted_mode->flags &= ~DRM_MODE_FLAG_NHSYNC;
654 } else {
655 adjusted_mode->flags |= DRM_MODE_FLAG_NHSYNC;
656 adjusted_mode->flags &= ~DRM_MODE_FLAG_PHSYNC;
657 }
658
659 return true;
660}
661
662static int tilcdc_crtc_atomic_check(struct drm_crtc *crtc,
663 struct drm_crtc_state *state)
664{
665 /* If we are not active we don't care */
666 if (!state->active)
667 return 0;
668
669 if (state->state->planes[0].ptr != crtc->primary ||
670 state->state->planes[0].state == NULL ||
671 state->state->planes[0].state->crtc != crtc) {
672 dev_dbg(crtc->dev->dev, "CRTC primary plane must be present");
673 return -EINVAL;
674 }
675
676 return 0;
677}
678
679static int tilcdc_crtc_enable_vblank(struct drm_crtc *crtc)
680{
681 return 0;
682}
683
684static void tilcdc_crtc_disable_vblank(struct drm_crtc *crtc)
685{
686}
687
688static void tilcdc_crtc_reset(struct drm_crtc *crtc)
689{
690 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
691 struct drm_device *dev = crtc->dev;
692 int ret;
693
694 drm_atomic_helper_crtc_reset(crtc);
695
696 /* Turn the raster off if it for some reason is on. */
697 pm_runtime_get_sync(dev->dev);
698 if (tilcdc_read(dev, LCDC_RASTER_CTRL_REG) & LCDC_RASTER_ENABLE) {
699 /* Enable DMA Frame Done Interrupt */
700 tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_FRAME_DONE);
701 tilcdc_clear_irqstatus(dev, 0xffffffff);
702
703 tilcdc_crtc->frame_done = false;
704 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
705
706 ret = wait_event_timeout(tilcdc_crtc->frame_done_wq,
707 tilcdc_crtc->frame_done,
708 msecs_to_jiffies(500));
709 if (ret == 0)
710 dev_err(dev->dev, "%s: timeout waiting for framedone\n",
711 __func__);
712 }
713 pm_runtime_put_sync(dev->dev);
714}
715
716static const struct drm_crtc_funcs tilcdc_crtc_funcs = {
717 .destroy = tilcdc_crtc_destroy,
718 .set_config = drm_atomic_helper_set_config,
719 .page_flip = drm_atomic_helper_page_flip,
720 .reset = tilcdc_crtc_reset,
721 .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
722 .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
723 .enable_vblank = tilcdc_crtc_enable_vblank,
724 .disable_vblank = tilcdc_crtc_disable_vblank,
725};
726
727int tilcdc_crtc_max_width(struct drm_crtc *crtc)
728{
729 struct drm_device *dev = crtc->dev;
730 struct tilcdc_drm_private *priv = dev->dev_private;
731 int max_width = 0;
732
733 if (priv->rev == 1)
734 max_width = 1024;
735 else if (priv->rev == 2)
736 max_width = 2048;
737
738 return max_width;
739}
740
741static enum drm_mode_status
742tilcdc_crtc_mode_valid(struct drm_crtc *crtc,
743 const struct drm_display_mode *mode)
744{
745 struct tilcdc_drm_private *priv = crtc->dev->dev_private;
746 unsigned int bandwidth;
747 uint32_t hbp, hfp, hsw, vbp, vfp, vsw;
748
749 /*
750 * check to see if the width is within the range that
751 * the LCD Controller physically supports
752 */
753 if (mode->hdisplay > tilcdc_crtc_max_width(crtc))
754 return MODE_VIRTUAL_X;
755
756 /* width must be multiple of 16 */
757 if (mode->hdisplay & 0xf)
758 return MODE_VIRTUAL_X;
759
760 if (mode->vdisplay > 2048)
761 return MODE_VIRTUAL_Y;
762
763 DBG("Processing mode %dx%d@%d with pixel clock %d",
764 mode->hdisplay, mode->vdisplay,
765 drm_mode_vrefresh(mode), mode->clock);
766
767 hbp = mode->htotal - mode->hsync_end;
768 hfp = mode->hsync_start - mode->hdisplay;
769 hsw = mode->hsync_end - mode->hsync_start;
770 vbp = mode->vtotal - mode->vsync_end;
771 vfp = mode->vsync_start - mode->vdisplay;
772 vsw = mode->vsync_end - mode->vsync_start;
773
774 if ((hbp-1) & ~0x3ff) {
775 DBG("Pruning mode: Horizontal Back Porch out of range");
776 return MODE_HBLANK_WIDE;
777 }
778
779 if ((hfp-1) & ~0x3ff) {
780 DBG("Pruning mode: Horizontal Front Porch out of range");
781 return MODE_HBLANK_WIDE;
782 }
783
784 if ((hsw-1) & ~0x3ff) {
785 DBG("Pruning mode: Horizontal Sync Width out of range");
786 return MODE_HSYNC_WIDE;
787 }
788
789 if (vbp & ~0xff) {
790 DBG("Pruning mode: Vertical Back Porch out of range");
791 return MODE_VBLANK_WIDE;
792 }
793
794 if (vfp & ~0xff) {
795 DBG("Pruning mode: Vertical Front Porch out of range");
796 return MODE_VBLANK_WIDE;
797 }
798
799 if ((vsw-1) & ~0x3f) {
800 DBG("Pruning mode: Vertical Sync Width out of range");
801 return MODE_VSYNC_WIDE;
802 }
803
804 /*
805 * some devices have a maximum allowed pixel clock
806 * configured from the DT
807 */
808 if (mode->clock > priv->max_pixelclock) {
809 DBG("Pruning mode: pixel clock too high");
810 return MODE_CLOCK_HIGH;
811 }
812
813 /*
814 * some devices further limit the max horizontal resolution
815 * configured from the DT
816 */
817 if (mode->hdisplay > priv->max_width)
818 return MODE_BAD_WIDTH;
819
820 /* filter out modes that would require too much memory bandwidth: */
821 bandwidth = mode->hdisplay * mode->vdisplay *
822 drm_mode_vrefresh(mode);
823 if (bandwidth > priv->max_bandwidth) {
824 DBG("Pruning mode: exceeds defined bandwidth limit");
825 return MODE_BAD;
826 }
827
828 return MODE_OK;
829}
830
831static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = {
832 .mode_valid = tilcdc_crtc_mode_valid,
833 .mode_fixup = tilcdc_crtc_mode_fixup,
834 .atomic_check = tilcdc_crtc_atomic_check,
835 .atomic_enable = tilcdc_crtc_atomic_enable,
836 .atomic_disable = tilcdc_crtc_atomic_disable,
837 .atomic_flush = tilcdc_crtc_atomic_flush,
838};
839
840void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
841 const struct tilcdc_panel_info *info)
842{
843 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
844 tilcdc_crtc->info = info;
845}
846
847void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc,
848 bool simulate_vesa_sync)
849{
850 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
851
852 tilcdc_crtc->simulate_vesa_sync = simulate_vesa_sync;
853}
854
855void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
856{
857 struct drm_device *dev = crtc->dev;
858 struct tilcdc_drm_private *priv = dev->dev_private;
859 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
860
861 drm_modeset_lock(&crtc->mutex, NULL);
862 if (tilcdc_crtc->lcd_fck_rate != clk_get_rate(priv->clk)) {
863 if (tilcdc_crtc_is_on(crtc)) {
864 pm_runtime_get_sync(dev->dev);
865 tilcdc_crtc_disable(crtc);
866
867 tilcdc_crtc_set_clk(crtc);
868
869 tilcdc_crtc_enable(crtc);
870 pm_runtime_put_sync(dev->dev);
871 }
872 }
873 drm_modeset_unlock(&crtc->mutex);
874}
875
876#define SYNC_LOST_COUNT_LIMIT 50
877
878irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
879{
880 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
881 struct drm_device *dev = crtc->dev;
882 struct tilcdc_drm_private *priv = dev->dev_private;
883 uint32_t stat, reg;
884
885 stat = tilcdc_read_irqstatus(dev);
886 tilcdc_clear_irqstatus(dev, stat);
887
888 if (stat & LCDC_END_OF_FRAME0) {
889 unsigned long flags;
890 bool skip_event = false;
891 ktime_t now;
892
893 now = ktime_get();
894
895 spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
896
897 tilcdc_crtc->last_vblank = now;
898
899 if (tilcdc_crtc->next_fb) {
900 set_scanout(crtc, tilcdc_crtc->next_fb);
901 tilcdc_crtc->next_fb = NULL;
902 skip_event = true;
903 }
904
905 spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
906
907 drm_crtc_handle_vblank(crtc);
908
909 if (!skip_event) {
910 struct drm_pending_vblank_event *event;
911
912 spin_lock_irqsave(&dev->event_lock, flags);
913
914 event = tilcdc_crtc->event;
915 tilcdc_crtc->event = NULL;
916 if (event)
917 drm_crtc_send_vblank_event(crtc, event);
918
919 spin_unlock_irqrestore(&dev->event_lock, flags);
920 }
921
922 if (tilcdc_crtc->frame_intact)
923 tilcdc_crtc->sync_lost_count = 0;
924 else
925 tilcdc_crtc->frame_intact = true;
926 }
927
928 if (stat & LCDC_FIFO_UNDERFLOW)
929 dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underflow",
930 __func__, stat);
931
932 if (stat & LCDC_PL_LOAD_DONE) {
933 complete(&tilcdc_crtc->palette_loaded);
934 if (priv->rev == 1)
935 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
936 LCDC_V1_PL_INT_ENA);
937 else
938 tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
939 LCDC_V2_PL_INT_ENA);
940 }
941
942 if (stat & LCDC_SYNC_LOST) {
943 dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost",
944 __func__, stat);
945 tilcdc_crtc->frame_intact = false;
946 if (priv->rev == 1) {
947 reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG);
948 if (reg & LCDC_RASTER_ENABLE) {
949 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
950 LCDC_RASTER_ENABLE);
951 tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
952 LCDC_RASTER_ENABLE);
953 }
954 } else {
955 if (tilcdc_crtc->sync_lost_count++ >
956 SYNC_LOST_COUNT_LIMIT) {
957 dev_err(dev->dev,
958 "%s(0x%08x): Sync lost flood detected, recovering",
959 __func__, stat);
960 queue_work(system_wq,
961 &tilcdc_crtc->recover_work);
962 tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
963 LCDC_SYNC_LOST);
964 tilcdc_crtc->sync_lost_count = 0;
965 }
966 }
967 }
968
969 if (stat & LCDC_FRAME_DONE) {
970 tilcdc_crtc->frame_done = true;
971 wake_up(&tilcdc_crtc->frame_done_wq);
972 /* rev 1 lcdc appears to hang if irq is not disbaled here */
973 if (priv->rev == 1)
974 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
975 LCDC_V1_FRAME_DONE_INT_ENA);
976 }
977
978 /* For revision 2 only */
979 if (priv->rev == 2) {
980 /* Indicate to LCDC that the interrupt service routine has
981 * completed, see 13.3.6.1.6 in AM335x TRM.
982 */
983 tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
984 }
985
986 return IRQ_HANDLED;
987}
988
989int tilcdc_crtc_create(struct drm_device *dev)
990{
991 struct tilcdc_drm_private *priv = dev->dev_private;
992 struct tilcdc_crtc *tilcdc_crtc;
993 struct drm_crtc *crtc;
994 int ret;
995
996 tilcdc_crtc = devm_kzalloc(dev->dev, sizeof(*tilcdc_crtc), GFP_KERNEL);
997 if (!tilcdc_crtc)
998 return -ENOMEM;
999
1000 init_completion(&tilcdc_crtc->palette_loaded);
1001 tilcdc_crtc->palette_base = dmam_alloc_coherent(dev->dev,
1002 TILCDC_PALETTE_SIZE,
1003 &tilcdc_crtc->palette_dma_handle,
1004 GFP_KERNEL | __GFP_ZERO);
1005 if (!tilcdc_crtc->palette_base)
1006 return -ENOMEM;
1007 *tilcdc_crtc->palette_base = TILCDC_PALETTE_FIRST_ENTRY;
1008
1009 crtc = &tilcdc_crtc->base;
1010
1011 ret = tilcdc_plane_init(dev, &tilcdc_crtc->primary);
1012 if (ret < 0)
1013 goto fail;
1014
1015 mutex_init(&tilcdc_crtc->enable_lock);
1016
1017 init_waitqueue_head(&tilcdc_crtc->frame_done_wq);
1018
1019 spin_lock_init(&tilcdc_crtc->irq_lock);
1020 INIT_WORK(&tilcdc_crtc->recover_work, tilcdc_crtc_recover_work);
1021
1022 ret = drm_crtc_init_with_planes(dev, crtc,
1023 &tilcdc_crtc->primary,
1024 NULL,
1025 &tilcdc_crtc_funcs,
1026 "tilcdc crtc");
1027 if (ret < 0)
1028 goto fail;
1029
1030 drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs);
1031
1032 if (priv->is_componentized) {
1033 crtc->port = of_graph_get_port_by_id(dev->dev->of_node, 0);
1034 if (!crtc->port) { /* This should never happen */
1035 dev_err(dev->dev, "Port node not found in %pOF\n",
1036 dev->dev->of_node);
1037 ret = -EINVAL;
1038 goto fail;
1039 }
1040 }
1041
1042 priv->crtc = crtc;
1043 return 0;
1044
1045fail:
1046 tilcdc_crtc_destroy(crtc);
1047 return ret;
1048}
1/*
2 * Copyright (C) 2012 Texas Instruments
3 * Author: Rob Clark <robdclark@gmail.com>
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 as published by
7 * the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program. If not, see <http://www.gnu.org/licenses/>.
16 */
17
18#include <drm/drm_atomic.h>
19#include <drm/drm_atomic_helper.h>
20#include <drm/drm_crtc.h>
21#include <drm/drm_flip_work.h>
22#include <drm/drm_plane_helper.h>
23#include <linux/workqueue.h>
24#include <linux/completion.h>
25#include <linux/dma-mapping.h>
26
27#include "tilcdc_drv.h"
28#include "tilcdc_regs.h"
29
30#define TILCDC_VBLANK_SAFETY_THRESHOLD_US 1000
31#define TILCDC_PALETTE_SIZE 32
32#define TILCDC_PALETTE_FIRST_ENTRY 0x4000
33
34struct tilcdc_crtc {
35 struct drm_crtc base;
36
37 struct drm_plane primary;
38 const struct tilcdc_panel_info *info;
39 struct drm_pending_vblank_event *event;
40 struct mutex enable_lock;
41 bool enabled;
42 bool shutdown;
43 wait_queue_head_t frame_done_wq;
44 bool frame_done;
45 spinlock_t irq_lock;
46
47 unsigned int lcd_fck_rate;
48
49 ktime_t last_vblank;
50
51 struct drm_framebuffer *curr_fb;
52 struct drm_framebuffer *next_fb;
53
54 /* for deferred fb unref's: */
55 struct drm_flip_work unref_work;
56
57 /* Only set if an external encoder is connected */
58 bool simulate_vesa_sync;
59
60 int sync_lost_count;
61 bool frame_intact;
62 struct work_struct recover_work;
63
64 dma_addr_t palette_dma_handle;
65 u16 *palette_base;
66 struct completion palette_loaded;
67};
68#define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base)
69
70static void unref_worker(struct drm_flip_work *work, void *val)
71{
72 struct tilcdc_crtc *tilcdc_crtc =
73 container_of(work, struct tilcdc_crtc, unref_work);
74 struct drm_device *dev = tilcdc_crtc->base.dev;
75
76 mutex_lock(&dev->mode_config.mutex);
77 drm_framebuffer_unreference(val);
78 mutex_unlock(&dev->mode_config.mutex);
79}
80
81static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb)
82{
83 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
84 struct drm_device *dev = crtc->dev;
85 struct tilcdc_drm_private *priv = dev->dev_private;
86 struct drm_gem_cma_object *gem;
87 dma_addr_t start, end;
88 u64 dma_base_and_ceiling;
89
90 gem = drm_fb_cma_get_gem_obj(fb, 0);
91
92 start = gem->paddr + fb->offsets[0] +
93 crtc->y * fb->pitches[0] +
94 crtc->x * drm_format_plane_cpp(fb->pixel_format, 0);
95
96 end = start + (crtc->mode.vdisplay * fb->pitches[0]);
97
98 /* Write LCDC_DMA_FB_BASE_ADDR_0_REG and LCDC_DMA_FB_CEILING_ADDR_0_REG
99 * with a single insruction, if available. This should make it more
100 * unlikely that LCDC would fetch the DMA addresses in the middle of
101 * an update.
102 */
103 if (priv->rev == 1)
104 end -= 1;
105
106 dma_base_and_ceiling = (u64)end << 32 | start;
107 tilcdc_write64(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, dma_base_and_ceiling);
108
109 if (tilcdc_crtc->curr_fb)
110 drm_flip_work_queue(&tilcdc_crtc->unref_work,
111 tilcdc_crtc->curr_fb);
112
113 tilcdc_crtc->curr_fb = fb;
114}
115
116/*
117 * The driver currently only supports only true color formats. For
118 * true color the palette block is bypassed, but a 32 byte palette
119 * should still be loaded. The first 16-bit entry must be 0x4000 while
120 * all other entries must be zeroed.
121 */
122static void tilcdc_crtc_load_palette(struct drm_crtc *crtc)
123{
124 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
125 struct drm_device *dev = crtc->dev;
126 struct tilcdc_drm_private *priv = dev->dev_private;
127 int ret;
128
129 reinit_completion(&tilcdc_crtc->palette_loaded);
130
131 /* Tell the LCDC where the palette is located. */
132 tilcdc_write(dev, LCDC_DMA_FB_BASE_ADDR_0_REG,
133 tilcdc_crtc->palette_dma_handle);
134 tilcdc_write(dev, LCDC_DMA_FB_CEILING_ADDR_0_REG,
135 (u32) tilcdc_crtc->palette_dma_handle +
136 TILCDC_PALETTE_SIZE - 1);
137
138 /* Set dma load mode for palette loading only. */
139 tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG,
140 LCDC_PALETTE_LOAD_MODE(PALETTE_ONLY),
141 LCDC_PALETTE_LOAD_MODE_MASK);
142
143 /* Enable DMA Palette Loaded Interrupt */
144 if (priv->rev == 1)
145 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA);
146 else
147 tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG, LCDC_V2_PL_INT_ENA);
148
149 /* Enable LCDC DMA and wait for palette to be loaded. */
150 tilcdc_clear_irqstatus(dev, 0xffffffff);
151 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
152
153 ret = wait_for_completion_timeout(&tilcdc_crtc->palette_loaded,
154 msecs_to_jiffies(50));
155 if (ret == 0)
156 dev_err(dev->dev, "%s: Palette loading timeout", __func__);
157
158 /* Disable LCDC DMA and DMA Palette Loaded Interrupt. */
159 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
160 if (priv->rev == 1)
161 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_V1_PL_INT_ENA);
162 else
163 tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, LCDC_V2_PL_INT_ENA);
164}
165
166static void tilcdc_crtc_enable_irqs(struct drm_device *dev)
167{
168 struct tilcdc_drm_private *priv = dev->dev_private;
169
170 tilcdc_clear_irqstatus(dev, 0xffffffff);
171
172 if (priv->rev == 1) {
173 tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
174 LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA |
175 LCDC_V1_UNDERFLOW_INT_ENA);
176 tilcdc_set(dev, LCDC_DMA_CTRL_REG,
177 LCDC_V1_END_OF_FRAME_INT_ENA);
178 } else {
179 tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG,
180 LCDC_V2_UNDERFLOW_INT_ENA |
181 LCDC_V2_END_OF_FRAME0_INT_ENA |
182 LCDC_FRAME_DONE | LCDC_SYNC_LOST);
183 }
184}
185
186static void tilcdc_crtc_disable_irqs(struct drm_device *dev)
187{
188 struct tilcdc_drm_private *priv = dev->dev_private;
189
190 /* disable irqs that we might have enabled: */
191 if (priv->rev == 1) {
192 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
193 LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA |
194 LCDC_V1_UNDERFLOW_INT_ENA | LCDC_V1_PL_INT_ENA);
195 tilcdc_clear(dev, LCDC_DMA_CTRL_REG,
196 LCDC_V1_END_OF_FRAME_INT_ENA);
197 } else {
198 tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
199 LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA |
200 LCDC_V2_END_OF_FRAME0_INT_ENA |
201 LCDC_FRAME_DONE | LCDC_SYNC_LOST);
202 }
203}
204
205static void reset(struct drm_crtc *crtc)
206{
207 struct drm_device *dev = crtc->dev;
208 struct tilcdc_drm_private *priv = dev->dev_private;
209
210 if (priv->rev != 2)
211 return;
212
213 tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
214 usleep_range(250, 1000);
215 tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
216}
217
218/*
219 * Calculate the percentage difference between the requested pixel clock rate
220 * and the effective rate resulting from calculating the clock divider value.
221 */
222static unsigned int tilcdc_pclk_diff(unsigned long rate,
223 unsigned long real_rate)
224{
225 int r = rate / 100, rr = real_rate / 100;
226
227 return (unsigned int)(abs(((rr - r) * 100) / r));
228}
229
230static void tilcdc_crtc_set_clk(struct drm_crtc *crtc)
231{
232 struct drm_device *dev = crtc->dev;
233 struct tilcdc_drm_private *priv = dev->dev_private;
234 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
235 unsigned long clk_rate, real_rate, req_rate;
236 unsigned int clkdiv;
237 int ret;
238
239 clkdiv = 2; /* first try using a standard divider of 2 */
240
241 /* mode.clock is in KHz, set_rate wants parameter in Hz */
242 req_rate = crtc->mode.clock * 1000;
243
244 ret = clk_set_rate(priv->clk, req_rate * clkdiv);
245 clk_rate = clk_get_rate(priv->clk);
246 if (ret < 0) {
247 /*
248 * If we fail to set the clock rate (some architectures don't
249 * use the common clock framework yet and may not implement
250 * all the clk API calls for every clock), try the next best
251 * thing: adjusting the clock divider, unless clk_get_rate()
252 * failed as well.
253 */
254 if (!clk_rate) {
255 /* Nothing more we can do. Just bail out. */
256 dev_err(dev->dev,
257 "failed to set the pixel clock - unable to read current lcdc clock rate\n");
258 return;
259 }
260
261 clkdiv = DIV_ROUND_CLOSEST(clk_rate, req_rate);
262
263 /*
264 * Emit a warning if the real clock rate resulting from the
265 * calculated divider differs much from the requested rate.
266 *
267 * 5% is an arbitrary value - LCDs are usually quite tolerant
268 * about pixel clock rates.
269 */
270 real_rate = clkdiv * req_rate;
271
272 if (tilcdc_pclk_diff(clk_rate, real_rate) > 5) {
273 dev_warn(dev->dev,
274 "effective pixel clock rate (%luHz) differs from the calculated rate (%luHz)\n",
275 clk_rate, real_rate);
276 }
277 }
278
279 tilcdc_crtc->lcd_fck_rate = clk_rate;
280
281 DBG("lcd_clk=%u, mode clock=%d, div=%u",
282 tilcdc_crtc->lcd_fck_rate, crtc->mode.clock, clkdiv);
283
284 /* Configure the LCD clock divisor. */
285 tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(clkdiv) |
286 LCDC_RASTER_MODE);
287
288 if (priv->rev == 2)
289 tilcdc_set(dev, LCDC_CLK_ENABLE_REG,
290 LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN |
291 LCDC_V2_CORE_CLK_EN);
292}
293
294static void tilcdc_crtc_set_mode(struct drm_crtc *crtc)
295{
296 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
297 struct drm_device *dev = crtc->dev;
298 struct tilcdc_drm_private *priv = dev->dev_private;
299 const struct tilcdc_panel_info *info = tilcdc_crtc->info;
300 uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw;
301 struct drm_display_mode *mode = &crtc->state->adjusted_mode;
302 struct drm_framebuffer *fb = crtc->primary->state->fb;
303
304 if (WARN_ON(!info))
305 return;
306
307 if (WARN_ON(!fb))
308 return;
309
310 /* Configure the Burst Size and fifo threshold of DMA: */
311 reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770;
312 switch (info->dma_burst_sz) {
313 case 1:
314 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1);
315 break;
316 case 2:
317 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2);
318 break;
319 case 4:
320 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4);
321 break;
322 case 8:
323 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8);
324 break;
325 case 16:
326 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16);
327 break;
328 default:
329 dev_err(dev->dev, "invalid burst size\n");
330 return;
331 }
332 reg |= (info->fifo_th << 8);
333 tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg);
334
335 /* Configure timings: */
336 hbp = mode->htotal - mode->hsync_end;
337 hfp = mode->hsync_start - mode->hdisplay;
338 hsw = mode->hsync_end - mode->hsync_start;
339 vbp = mode->vtotal - mode->vsync_end;
340 vfp = mode->vsync_start - mode->vdisplay;
341 vsw = mode->vsync_end - mode->vsync_start;
342
343 DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
344 mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
345
346 /* Set AC Bias Period and Number of Transitions per Interrupt: */
347 reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00;
348 reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) |
349 LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt);
350
351 /*
352 * subtract one from hfp, hbp, hsw because the hardware uses
353 * a value of 0 as 1
354 */
355 if (priv->rev == 2) {
356 /* clear bits we're going to set */
357 reg &= ~0x78000033;
358 reg |= ((hfp-1) & 0x300) >> 8;
359 reg |= ((hbp-1) & 0x300) >> 4;
360 reg |= ((hsw-1) & 0x3c0) << 21;
361 }
362 tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg);
363
364 reg = (((mode->hdisplay >> 4) - 1) << 4) |
365 (((hbp-1) & 0xff) << 24) |
366 (((hfp-1) & 0xff) << 16) |
367 (((hsw-1) & 0x3f) << 10);
368 if (priv->rev == 2)
369 reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3;
370 tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg);
371
372 reg = ((mode->vdisplay - 1) & 0x3ff) |
373 ((vbp & 0xff) << 24) |
374 ((vfp & 0xff) << 16) |
375 (((vsw-1) & 0x3f) << 10);
376 tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg);
377
378 /*
379 * be sure to set Bit 10 for the V2 LCDC controller,
380 * otherwise limited to 1024 pixels width, stopping
381 * 1920x1080 being supported.
382 */
383 if (priv->rev == 2) {
384 if ((mode->vdisplay - 1) & 0x400) {
385 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG,
386 LCDC_LPP_B10);
387 } else {
388 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG,
389 LCDC_LPP_B10);
390 }
391 }
392
393 /* Configure display type: */
394 reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) &
395 ~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE |
396 LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK |
397 0x000ff000 /* Palette Loading Delay bits */);
398 reg |= LCDC_TFT_MODE; /* no monochrome/passive support */
399 if (info->tft_alt_mode)
400 reg |= LCDC_TFT_ALT_ENABLE;
401 if (priv->rev == 2) {
402 switch (fb->pixel_format) {
403 case DRM_FORMAT_BGR565:
404 case DRM_FORMAT_RGB565:
405 break;
406 case DRM_FORMAT_XBGR8888:
407 case DRM_FORMAT_XRGB8888:
408 reg |= LCDC_V2_TFT_24BPP_UNPACK;
409 /* fallthrough */
410 case DRM_FORMAT_BGR888:
411 case DRM_FORMAT_RGB888:
412 reg |= LCDC_V2_TFT_24BPP_MODE;
413 break;
414 default:
415 dev_err(dev->dev, "invalid pixel format\n");
416 return;
417 }
418 }
419 reg |= info->fdd < 12;
420 tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg);
421
422 if (info->invert_pxl_clk)
423 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
424 else
425 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
426
427 if (info->sync_ctrl)
428 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
429 else
430 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
431
432 if (info->sync_edge)
433 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
434 else
435 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
436
437 if (mode->flags & DRM_MODE_FLAG_NHSYNC)
438 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
439 else
440 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
441
442 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
443 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
444 else
445 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
446
447 if (info->raster_order)
448 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
449 else
450 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
451
452 tilcdc_crtc_set_clk(crtc);
453
454 tilcdc_crtc_load_palette(crtc);
455
456 set_scanout(crtc, fb);
457
458 drm_framebuffer_reference(fb);
459
460 crtc->hwmode = crtc->state->adjusted_mode;
461}
462
463static void tilcdc_crtc_enable(struct drm_crtc *crtc)
464{
465 struct drm_device *dev = crtc->dev;
466 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
467
468 WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
469 mutex_lock(&tilcdc_crtc->enable_lock);
470 if (tilcdc_crtc->enabled || tilcdc_crtc->shutdown) {
471 mutex_unlock(&tilcdc_crtc->enable_lock);
472 return;
473 }
474
475 pm_runtime_get_sync(dev->dev);
476
477 reset(crtc);
478
479 tilcdc_crtc_set_mode(crtc);
480
481 tilcdc_crtc_enable_irqs(dev);
482
483 tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE);
484 tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG,
485 LCDC_PALETTE_LOAD_MODE(DATA_ONLY),
486 LCDC_PALETTE_LOAD_MODE_MASK);
487 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
488
489 drm_crtc_vblank_on(crtc);
490
491 tilcdc_crtc->enabled = true;
492 mutex_unlock(&tilcdc_crtc->enable_lock);
493}
494
495static void tilcdc_crtc_off(struct drm_crtc *crtc, bool shutdown)
496{
497 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
498 struct drm_device *dev = crtc->dev;
499 struct tilcdc_drm_private *priv = dev->dev_private;
500 int ret;
501
502 mutex_lock(&tilcdc_crtc->enable_lock);
503 if (shutdown)
504 tilcdc_crtc->shutdown = true;
505 if (!tilcdc_crtc->enabled) {
506 mutex_unlock(&tilcdc_crtc->enable_lock);
507 return;
508 }
509 tilcdc_crtc->frame_done = false;
510 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
511
512 /*
513 * Wait for framedone irq which will still come before putting
514 * things to sleep..
515 */
516 ret = wait_event_timeout(tilcdc_crtc->frame_done_wq,
517 tilcdc_crtc->frame_done,
518 msecs_to_jiffies(500));
519 if (ret == 0)
520 dev_err(dev->dev, "%s: timeout waiting for framedone\n",
521 __func__);
522
523 drm_crtc_vblank_off(crtc);
524
525 tilcdc_crtc_disable_irqs(dev);
526
527 pm_runtime_put_sync(dev->dev);
528
529 if (tilcdc_crtc->next_fb) {
530 drm_flip_work_queue(&tilcdc_crtc->unref_work,
531 tilcdc_crtc->next_fb);
532 tilcdc_crtc->next_fb = NULL;
533 }
534
535 if (tilcdc_crtc->curr_fb) {
536 drm_flip_work_queue(&tilcdc_crtc->unref_work,
537 tilcdc_crtc->curr_fb);
538 tilcdc_crtc->curr_fb = NULL;
539 }
540
541 drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
542 tilcdc_crtc->last_vblank = 0;
543
544 tilcdc_crtc->enabled = false;
545 mutex_unlock(&tilcdc_crtc->enable_lock);
546}
547
548static void tilcdc_crtc_disable(struct drm_crtc *crtc)
549{
550 WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
551 tilcdc_crtc_off(crtc, false);
552}
553
554void tilcdc_crtc_shutdown(struct drm_crtc *crtc)
555{
556 tilcdc_crtc_off(crtc, true);
557}
558
559static bool tilcdc_crtc_is_on(struct drm_crtc *crtc)
560{
561 return crtc->state && crtc->state->enable && crtc->state->active;
562}
563
564static void tilcdc_crtc_recover_work(struct work_struct *work)
565{
566 struct tilcdc_crtc *tilcdc_crtc =
567 container_of(work, struct tilcdc_crtc, recover_work);
568 struct drm_crtc *crtc = &tilcdc_crtc->base;
569
570 dev_info(crtc->dev->dev, "%s: Reset CRTC", __func__);
571
572 drm_modeset_lock_crtc(crtc, NULL);
573
574 if (!tilcdc_crtc_is_on(crtc))
575 goto out;
576
577 tilcdc_crtc_disable(crtc);
578 tilcdc_crtc_enable(crtc);
579out:
580 drm_modeset_unlock_crtc(crtc);
581}
582
583static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
584{
585 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
586 struct tilcdc_drm_private *priv = crtc->dev->dev_private;
587
588 drm_modeset_lock_crtc(crtc, NULL);
589 tilcdc_crtc_disable(crtc);
590 drm_modeset_unlock_crtc(crtc);
591
592 flush_workqueue(priv->wq);
593
594 of_node_put(crtc->port);
595 drm_crtc_cleanup(crtc);
596 drm_flip_work_cleanup(&tilcdc_crtc->unref_work);
597}
598
599int tilcdc_crtc_update_fb(struct drm_crtc *crtc,
600 struct drm_framebuffer *fb,
601 struct drm_pending_vblank_event *event)
602{
603 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
604 struct drm_device *dev = crtc->dev;
605 unsigned long flags;
606
607 WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
608
609 if (tilcdc_crtc->event) {
610 dev_err(dev->dev, "already pending page flip!\n");
611 return -EBUSY;
612 }
613
614 drm_framebuffer_reference(fb);
615
616 crtc->primary->fb = fb;
617
618 spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
619
620 if (crtc->hwmode.vrefresh && ktime_to_ns(tilcdc_crtc->last_vblank)) {
621 ktime_t next_vblank;
622 s64 tdiff;
623
624 next_vblank = ktime_add_us(tilcdc_crtc->last_vblank,
625 1000000 / crtc->hwmode.vrefresh);
626
627 tdiff = ktime_to_us(ktime_sub(next_vblank, ktime_get()));
628
629 if (tdiff < TILCDC_VBLANK_SAFETY_THRESHOLD_US)
630 tilcdc_crtc->next_fb = fb;
631 }
632
633 if (tilcdc_crtc->next_fb != fb)
634 set_scanout(crtc, fb);
635
636 tilcdc_crtc->event = event;
637
638 spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
639
640 return 0;
641}
642
643static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc,
644 const struct drm_display_mode *mode,
645 struct drm_display_mode *adjusted_mode)
646{
647 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
648
649 if (!tilcdc_crtc->simulate_vesa_sync)
650 return true;
651
652 /*
653 * tilcdc does not generate VESA-compliant sync but aligns
654 * VS on the second edge of HS instead of first edge.
655 * We use adjusted_mode, to fixup sync by aligning both rising
656 * edges and add HSKEW offset to fix the sync.
657 */
658 adjusted_mode->hskew = mode->hsync_end - mode->hsync_start;
659 adjusted_mode->flags |= DRM_MODE_FLAG_HSKEW;
660
661 if (mode->flags & DRM_MODE_FLAG_NHSYNC) {
662 adjusted_mode->flags |= DRM_MODE_FLAG_PHSYNC;
663 adjusted_mode->flags &= ~DRM_MODE_FLAG_NHSYNC;
664 } else {
665 adjusted_mode->flags |= DRM_MODE_FLAG_NHSYNC;
666 adjusted_mode->flags &= ~DRM_MODE_FLAG_PHSYNC;
667 }
668
669 return true;
670}
671
672static int tilcdc_crtc_atomic_check(struct drm_crtc *crtc,
673 struct drm_crtc_state *state)
674{
675 struct drm_display_mode *mode = &state->mode;
676 int ret;
677
678 /* If we are not active we don't care */
679 if (!state->active)
680 return 0;
681
682 if (state->state->planes[0].ptr != crtc->primary ||
683 state->state->planes[0].state == NULL ||
684 state->state->planes[0].state->crtc != crtc) {
685 dev_dbg(crtc->dev->dev, "CRTC primary plane must be present");
686 return -EINVAL;
687 }
688
689 ret = tilcdc_crtc_mode_valid(crtc, mode);
690 if (ret) {
691 dev_dbg(crtc->dev->dev, "Mode \"%s\" not valid", mode->name);
692 return -EINVAL;
693 }
694
695 return 0;
696}
697
698static const struct drm_crtc_funcs tilcdc_crtc_funcs = {
699 .destroy = tilcdc_crtc_destroy,
700 .set_config = drm_atomic_helper_set_config,
701 .page_flip = drm_atomic_helper_page_flip,
702 .reset = drm_atomic_helper_crtc_reset,
703 .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
704 .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
705};
706
707static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = {
708 .mode_fixup = tilcdc_crtc_mode_fixup,
709 .enable = tilcdc_crtc_enable,
710 .disable = tilcdc_crtc_disable,
711 .atomic_check = tilcdc_crtc_atomic_check,
712};
713
714int tilcdc_crtc_max_width(struct drm_crtc *crtc)
715{
716 struct drm_device *dev = crtc->dev;
717 struct tilcdc_drm_private *priv = dev->dev_private;
718 int max_width = 0;
719
720 if (priv->rev == 1)
721 max_width = 1024;
722 else if (priv->rev == 2)
723 max_width = 2048;
724
725 return max_width;
726}
727
728int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode)
729{
730 struct tilcdc_drm_private *priv = crtc->dev->dev_private;
731 unsigned int bandwidth;
732 uint32_t hbp, hfp, hsw, vbp, vfp, vsw;
733
734 /*
735 * check to see if the width is within the range that
736 * the LCD Controller physically supports
737 */
738 if (mode->hdisplay > tilcdc_crtc_max_width(crtc))
739 return MODE_VIRTUAL_X;
740
741 /* width must be multiple of 16 */
742 if (mode->hdisplay & 0xf)
743 return MODE_VIRTUAL_X;
744
745 if (mode->vdisplay > 2048)
746 return MODE_VIRTUAL_Y;
747
748 DBG("Processing mode %dx%d@%d with pixel clock %d",
749 mode->hdisplay, mode->vdisplay,
750 drm_mode_vrefresh(mode), mode->clock);
751
752 hbp = mode->htotal - mode->hsync_end;
753 hfp = mode->hsync_start - mode->hdisplay;
754 hsw = mode->hsync_end - mode->hsync_start;
755 vbp = mode->vtotal - mode->vsync_end;
756 vfp = mode->vsync_start - mode->vdisplay;
757 vsw = mode->vsync_end - mode->vsync_start;
758
759 if ((hbp-1) & ~0x3ff) {
760 DBG("Pruning mode: Horizontal Back Porch out of range");
761 return MODE_HBLANK_WIDE;
762 }
763
764 if ((hfp-1) & ~0x3ff) {
765 DBG("Pruning mode: Horizontal Front Porch out of range");
766 return MODE_HBLANK_WIDE;
767 }
768
769 if ((hsw-1) & ~0x3ff) {
770 DBG("Pruning mode: Horizontal Sync Width out of range");
771 return MODE_HSYNC_WIDE;
772 }
773
774 if (vbp & ~0xff) {
775 DBG("Pruning mode: Vertical Back Porch out of range");
776 return MODE_VBLANK_WIDE;
777 }
778
779 if (vfp & ~0xff) {
780 DBG("Pruning mode: Vertical Front Porch out of range");
781 return MODE_VBLANK_WIDE;
782 }
783
784 if ((vsw-1) & ~0x3f) {
785 DBG("Pruning mode: Vertical Sync Width out of range");
786 return MODE_VSYNC_WIDE;
787 }
788
789 /*
790 * some devices have a maximum allowed pixel clock
791 * configured from the DT
792 */
793 if (mode->clock > priv->max_pixelclock) {
794 DBG("Pruning mode: pixel clock too high");
795 return MODE_CLOCK_HIGH;
796 }
797
798 /*
799 * some devices further limit the max horizontal resolution
800 * configured from the DT
801 */
802 if (mode->hdisplay > priv->max_width)
803 return MODE_BAD_WIDTH;
804
805 /* filter out modes that would require too much memory bandwidth: */
806 bandwidth = mode->hdisplay * mode->vdisplay *
807 drm_mode_vrefresh(mode);
808 if (bandwidth > priv->max_bandwidth) {
809 DBG("Pruning mode: exceeds defined bandwidth limit");
810 return MODE_BAD;
811 }
812
813 return MODE_OK;
814}
815
816void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
817 const struct tilcdc_panel_info *info)
818{
819 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
820 tilcdc_crtc->info = info;
821}
822
823void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc,
824 bool simulate_vesa_sync)
825{
826 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
827
828 tilcdc_crtc->simulate_vesa_sync = simulate_vesa_sync;
829}
830
831void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
832{
833 struct drm_device *dev = crtc->dev;
834 struct tilcdc_drm_private *priv = dev->dev_private;
835 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
836
837 drm_modeset_lock_crtc(crtc, NULL);
838 if (tilcdc_crtc->lcd_fck_rate != clk_get_rate(priv->clk)) {
839 if (tilcdc_crtc_is_on(crtc)) {
840 pm_runtime_get_sync(dev->dev);
841 tilcdc_crtc_disable(crtc);
842
843 tilcdc_crtc_set_clk(crtc);
844
845 tilcdc_crtc_enable(crtc);
846 pm_runtime_put_sync(dev->dev);
847 }
848 }
849 drm_modeset_unlock_crtc(crtc);
850}
851
852#define SYNC_LOST_COUNT_LIMIT 50
853
854irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
855{
856 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
857 struct drm_device *dev = crtc->dev;
858 struct tilcdc_drm_private *priv = dev->dev_private;
859 uint32_t stat, reg;
860
861 stat = tilcdc_read_irqstatus(dev);
862 tilcdc_clear_irqstatus(dev, stat);
863
864 if (stat & LCDC_END_OF_FRAME0) {
865 unsigned long flags;
866 bool skip_event = false;
867 ktime_t now;
868
869 now = ktime_get();
870
871 drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
872
873 spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
874
875 tilcdc_crtc->last_vblank = now;
876
877 if (tilcdc_crtc->next_fb) {
878 set_scanout(crtc, tilcdc_crtc->next_fb);
879 tilcdc_crtc->next_fb = NULL;
880 skip_event = true;
881 }
882
883 spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
884
885 drm_crtc_handle_vblank(crtc);
886
887 if (!skip_event) {
888 struct drm_pending_vblank_event *event;
889
890 spin_lock_irqsave(&dev->event_lock, flags);
891
892 event = tilcdc_crtc->event;
893 tilcdc_crtc->event = NULL;
894 if (event)
895 drm_crtc_send_vblank_event(crtc, event);
896
897 spin_unlock_irqrestore(&dev->event_lock, flags);
898 }
899
900 if (tilcdc_crtc->frame_intact)
901 tilcdc_crtc->sync_lost_count = 0;
902 else
903 tilcdc_crtc->frame_intact = true;
904 }
905
906 if (stat & LCDC_FIFO_UNDERFLOW)
907 dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underflow",
908 __func__, stat);
909
910 if (stat & LCDC_PL_LOAD_DONE) {
911 complete(&tilcdc_crtc->palette_loaded);
912 if (priv->rev == 1)
913 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
914 LCDC_V1_PL_INT_ENA);
915 else
916 tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
917 LCDC_V2_PL_INT_ENA);
918 }
919
920 if (stat & LCDC_SYNC_LOST) {
921 dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost",
922 __func__, stat);
923 tilcdc_crtc->frame_intact = false;
924 if (priv->rev == 1) {
925 reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG);
926 if (reg & LCDC_RASTER_ENABLE) {
927 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
928 LCDC_RASTER_ENABLE);
929 tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
930 LCDC_RASTER_ENABLE);
931 }
932 } else {
933 if (tilcdc_crtc->sync_lost_count++ >
934 SYNC_LOST_COUNT_LIMIT) {
935 dev_err(dev->dev,
936 "%s(0x%08x): Sync lost flood detected, recovering",
937 __func__, stat);
938 queue_work(system_wq,
939 &tilcdc_crtc->recover_work);
940 tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
941 LCDC_SYNC_LOST);
942 tilcdc_crtc->sync_lost_count = 0;
943 }
944 }
945 }
946
947 if (stat & LCDC_FRAME_DONE) {
948 tilcdc_crtc->frame_done = true;
949 wake_up(&tilcdc_crtc->frame_done_wq);
950 /* rev 1 lcdc appears to hang if irq is not disbaled here */
951 if (priv->rev == 1)
952 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
953 LCDC_V1_FRAME_DONE_INT_ENA);
954 }
955
956 /* For revision 2 only */
957 if (priv->rev == 2) {
958 /* Indicate to LCDC that the interrupt service routine has
959 * completed, see 13.3.6.1.6 in AM335x TRM.
960 */
961 tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
962 }
963
964 return IRQ_HANDLED;
965}
966
967int tilcdc_crtc_create(struct drm_device *dev)
968{
969 struct tilcdc_drm_private *priv = dev->dev_private;
970 struct tilcdc_crtc *tilcdc_crtc;
971 struct drm_crtc *crtc;
972 int ret;
973
974 tilcdc_crtc = devm_kzalloc(dev->dev, sizeof(*tilcdc_crtc), GFP_KERNEL);
975 if (!tilcdc_crtc) {
976 dev_err(dev->dev, "allocation failed\n");
977 return -ENOMEM;
978 }
979
980 init_completion(&tilcdc_crtc->palette_loaded);
981 tilcdc_crtc->palette_base = dmam_alloc_coherent(dev->dev,
982 TILCDC_PALETTE_SIZE,
983 &tilcdc_crtc->palette_dma_handle,
984 GFP_KERNEL | __GFP_ZERO);
985 if (!tilcdc_crtc->palette_base)
986 return -ENOMEM;
987 *tilcdc_crtc->palette_base = TILCDC_PALETTE_FIRST_ENTRY;
988
989 crtc = &tilcdc_crtc->base;
990
991 ret = tilcdc_plane_init(dev, &tilcdc_crtc->primary);
992 if (ret < 0)
993 goto fail;
994
995 mutex_init(&tilcdc_crtc->enable_lock);
996
997 init_waitqueue_head(&tilcdc_crtc->frame_done_wq);
998
999 drm_flip_work_init(&tilcdc_crtc->unref_work,
1000 "unref", unref_worker);
1001
1002 spin_lock_init(&tilcdc_crtc->irq_lock);
1003 INIT_WORK(&tilcdc_crtc->recover_work, tilcdc_crtc_recover_work);
1004
1005 ret = drm_crtc_init_with_planes(dev, crtc,
1006 &tilcdc_crtc->primary,
1007 NULL,
1008 &tilcdc_crtc_funcs,
1009 "tilcdc crtc");
1010 if (ret < 0)
1011 goto fail;
1012
1013 drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs);
1014
1015 if (priv->is_componentized) {
1016 struct device_node *ports =
1017 of_get_child_by_name(dev->dev->of_node, "ports");
1018
1019 if (ports) {
1020 crtc->port = of_get_child_by_name(ports, "port");
1021 of_node_put(ports);
1022 } else {
1023 crtc->port =
1024 of_get_child_by_name(dev->dev->of_node, "port");
1025 }
1026 if (!crtc->port) { /* This should never happen */
1027 dev_err(dev->dev, "Port node not found in %s\n",
1028 dev->dev->of_node->full_name);
1029 ret = -EINVAL;
1030 goto fail;
1031 }
1032 }
1033
1034 priv->crtc = crtc;
1035 return 0;
1036
1037fail:
1038 tilcdc_crtc_destroy(crtc);
1039 return -ENOMEM;
1040}