Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2#ifndef SCSI_TRANSPORT_SAS_H
3#define SCSI_TRANSPORT_SAS_H
4
5#include <linux/transport_class.h>
6#include <linux/types.h>
7#include <linux/mutex.h>
8#include <scsi/sas.h>
9#include <linux/bsg-lib.h>
10
11struct scsi_transport_template;
12struct sas_rphy;
13struct request;
14
15#if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS)
16static inline int scsi_is_sas_rphy(const struct device *sdev)
17{
18 return 0;
19}
20#else
21extern int scsi_is_sas_rphy(const struct device *);
22#endif
23
24static inline int sas_protocol_ata(enum sas_protocol proto)
25{
26 return ((proto & SAS_PROTOCOL_SATA) ||
27 (proto & SAS_PROTOCOL_STP))? 1 : 0;
28}
29
30enum sas_linkrate {
31 /* These Values are defined in the SAS standard */
32 SAS_LINK_RATE_UNKNOWN = 0,
33 SAS_PHY_DISABLED = 1,
34 SAS_PHY_RESET_PROBLEM = 2,
35 SAS_SATA_SPINUP_HOLD = 3,
36 SAS_SATA_PORT_SELECTOR = 4,
37 SAS_PHY_RESET_IN_PROGRESS = 5,
38 SAS_LINK_RATE_1_5_GBPS = 8,
39 SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
40 SAS_LINK_RATE_3_0_GBPS = 9,
41 SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
42 SAS_LINK_RATE_6_0_GBPS = 10,
43 SAS_LINK_RATE_12_0_GBPS = 11,
44 /* These are virtual to the transport class and may never
45 * be signalled normally since the standard defined field
46 * is only 4 bits */
47 SAS_LINK_RATE_FAILED = 0x10,
48 SAS_PHY_VIRTUAL = 0x11,
49};
50
51struct sas_identify {
52 enum sas_device_type device_type;
53 enum sas_protocol initiator_port_protocols;
54 enum sas_protocol target_port_protocols;
55 u64 sas_address;
56 u8 phy_identifier;
57};
58
59struct sas_phy {
60 struct device dev;
61 int number;
62 int enabled;
63
64 /* phy identification */
65 struct sas_identify identify;
66
67 /* phy attributes */
68 enum sas_linkrate negotiated_linkrate;
69 enum sas_linkrate minimum_linkrate_hw;
70 enum sas_linkrate minimum_linkrate;
71 enum sas_linkrate maximum_linkrate_hw;
72 enum sas_linkrate maximum_linkrate;
73
74 /* link error statistics */
75 u32 invalid_dword_count;
76 u32 running_disparity_error_count;
77 u32 loss_of_dword_sync_count;
78 u32 phy_reset_problem_count;
79
80 /* for the list of phys belonging to a port */
81 struct list_head port_siblings;
82
83 /* available to the lldd */
84 void *hostdata;
85};
86
87#define dev_to_phy(d) \
88 container_of((d), struct sas_phy, dev)
89#define transport_class_to_phy(dev) \
90 dev_to_phy((dev)->parent)
91#define phy_to_shost(phy) \
92 dev_to_shost((phy)->dev.parent)
93
94struct request_queue;
95struct sas_rphy {
96 struct device dev;
97 struct sas_identify identify;
98 struct list_head list;
99 struct request_queue *q;
100 u32 scsi_target_id;
101};
102
103#define dev_to_rphy(d) \
104 container_of((d), struct sas_rphy, dev)
105#define transport_class_to_rphy(dev) \
106 dev_to_rphy((dev)->parent)
107#define rphy_to_shost(rphy) \
108 dev_to_shost((rphy)->dev.parent)
109#define target_to_rphy(targ) \
110 dev_to_rphy((targ)->dev.parent)
111
112struct sas_end_device {
113 struct sas_rphy rphy;
114 /* flags */
115 unsigned ready_led_meaning:1;
116 unsigned tlr_supported:1;
117 unsigned tlr_enabled:1;
118 /* parameters */
119 u16 I_T_nexus_loss_timeout;
120 u16 initiator_response_timeout;
121};
122#define rphy_to_end_device(r) \
123 container_of((r), struct sas_end_device, rphy)
124
125struct sas_expander_device {
126 int level;
127 int next_port_id;
128
129 #define SAS_EXPANDER_VENDOR_ID_LEN 8
130 char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
131 #define SAS_EXPANDER_PRODUCT_ID_LEN 16
132 char product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
133 #define SAS_EXPANDER_PRODUCT_REV_LEN 4
134 char product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
135 #define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN 8
136 char component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
137 u16 component_id;
138 u8 component_revision_id;
139
140 struct sas_rphy rphy;
141
142};
143#define rphy_to_expander_device(r) \
144 container_of((r), struct sas_expander_device, rphy)
145
146struct sas_port {
147 struct device dev;
148
149 int port_identifier;
150 int num_phys;
151 /* port flags */
152 unsigned int is_backlink:1;
153
154 /* the other end of the link */
155 struct sas_rphy *rphy;
156
157 struct mutex phy_list_mutex;
158 struct list_head phy_list;
159 struct list_head del_list; /* libsas only */
160};
161
162#define dev_to_sas_port(d) \
163 container_of((d), struct sas_port, dev)
164#define transport_class_to_sas_port(dev) \
165 dev_to_sas_port((dev)->parent)
166
167struct sas_phy_linkrates {
168 enum sas_linkrate maximum_linkrate;
169 enum sas_linkrate minimum_linkrate;
170};
171
172/* The functions by which the transport class and the driver communicate */
173struct sas_function_template {
174 int (*get_linkerrors)(struct sas_phy *);
175 int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
176 int (*get_bay_identifier)(struct sas_rphy *);
177 int (*phy_reset)(struct sas_phy *, int);
178 int (*phy_enable)(struct sas_phy *, int);
179 int (*phy_setup)(struct sas_phy *);
180 void (*phy_release)(struct sas_phy *);
181 int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
182 void (*smp_handler)(struct bsg_job *, struct Scsi_Host *,
183 struct sas_rphy *);
184};
185
186
187void sas_remove_children(struct device *);
188extern void sas_remove_host(struct Scsi_Host *);
189
190extern struct sas_phy *sas_phy_alloc(struct device *, int);
191extern void sas_phy_free(struct sas_phy *);
192extern int sas_phy_add(struct sas_phy *);
193extern void sas_phy_delete(struct sas_phy *);
194extern int scsi_is_sas_phy(const struct device *);
195
196u64 sas_get_address(struct scsi_device *);
197unsigned int sas_tlr_supported(struct scsi_device *);
198unsigned int sas_is_tlr_enabled(struct scsi_device *);
199void sas_disable_tlr(struct scsi_device *);
200void sas_enable_tlr(struct scsi_device *);
201
202extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
203extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
204void sas_rphy_free(struct sas_rphy *);
205extern int sas_rphy_add(struct sas_rphy *);
206extern void sas_rphy_remove(struct sas_rphy *);
207extern void sas_rphy_delete(struct sas_rphy *);
208extern void sas_rphy_unlink(struct sas_rphy *);
209
210struct sas_port *sas_port_alloc(struct device *, int);
211struct sas_port *sas_port_alloc_num(struct device *);
212int sas_port_add(struct sas_port *);
213void sas_port_free(struct sas_port *);
214void sas_port_delete(struct sas_port *);
215void sas_port_add_phy(struct sas_port *, struct sas_phy *);
216void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
217void sas_port_mark_backlink(struct sas_port *);
218int scsi_is_sas_port(const struct device *);
219struct sas_phy *sas_port_get_phy(struct sas_port *port);
220static inline void sas_port_put_phy(struct sas_phy *phy)
221{
222 if (phy)
223 put_device(&phy->dev);
224}
225
226extern struct scsi_transport_template *
227sas_attach_transport(struct sas_function_template *);
228extern void sas_release_transport(struct scsi_transport_template *);
229int sas_read_port_mode_page(struct scsi_device *);
230
231static inline int
232scsi_is_sas_expander_device(struct device *dev)
233{
234 struct sas_rphy *rphy;
235 if (!scsi_is_sas_rphy(dev))
236 return 0;
237 rphy = dev_to_rphy(dev);
238 return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
239 rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
240}
241
242#define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent)
243
244#endif /* SCSI_TRANSPORT_SAS_H */
1#ifndef SCSI_TRANSPORT_SAS_H
2#define SCSI_TRANSPORT_SAS_H
3
4#include <linux/transport_class.h>
5#include <linux/types.h>
6#include <linux/mutex.h>
7#include <scsi/sas.h>
8
9struct scsi_transport_template;
10struct sas_rphy;
11struct request;
12
13#if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS)
14static inline int scsi_is_sas_rphy(const struct device *sdev)
15{
16 return 0;
17}
18#else
19extern int scsi_is_sas_rphy(const struct device *);
20#endif
21
22static inline int sas_protocol_ata(enum sas_protocol proto)
23{
24 return ((proto & SAS_PROTOCOL_SATA) ||
25 (proto & SAS_PROTOCOL_STP))? 1 : 0;
26}
27
28enum sas_linkrate {
29 /* These Values are defined in the SAS standard */
30 SAS_LINK_RATE_UNKNOWN = 0,
31 SAS_PHY_DISABLED = 1,
32 SAS_PHY_RESET_PROBLEM = 2,
33 SAS_SATA_SPINUP_HOLD = 3,
34 SAS_SATA_PORT_SELECTOR = 4,
35 SAS_PHY_RESET_IN_PROGRESS = 5,
36 SAS_LINK_RATE_1_5_GBPS = 8,
37 SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
38 SAS_LINK_RATE_3_0_GBPS = 9,
39 SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
40 SAS_LINK_RATE_6_0_GBPS = 10,
41 SAS_LINK_RATE_12_0_GBPS = 11,
42 /* These are virtual to the transport class and may never
43 * be signalled normally since the standard defined field
44 * is only 4 bits */
45 SAS_LINK_RATE_FAILED = 0x10,
46 SAS_PHY_VIRTUAL = 0x11,
47};
48
49struct sas_identify {
50 enum sas_device_type device_type;
51 enum sas_protocol initiator_port_protocols;
52 enum sas_protocol target_port_protocols;
53 u64 sas_address;
54 u8 phy_identifier;
55};
56
57struct sas_phy {
58 struct device dev;
59 int number;
60 int enabled;
61
62 /* phy identification */
63 struct sas_identify identify;
64
65 /* phy attributes */
66 enum sas_linkrate negotiated_linkrate;
67 enum sas_linkrate minimum_linkrate_hw;
68 enum sas_linkrate minimum_linkrate;
69 enum sas_linkrate maximum_linkrate_hw;
70 enum sas_linkrate maximum_linkrate;
71
72 /* link error statistics */
73 u32 invalid_dword_count;
74 u32 running_disparity_error_count;
75 u32 loss_of_dword_sync_count;
76 u32 phy_reset_problem_count;
77
78 /* for the list of phys belonging to a port */
79 struct list_head port_siblings;
80
81 /* available to the lldd */
82 void *hostdata;
83};
84
85#define dev_to_phy(d) \
86 container_of((d), struct sas_phy, dev)
87#define transport_class_to_phy(dev) \
88 dev_to_phy((dev)->parent)
89#define phy_to_shost(phy) \
90 dev_to_shost((phy)->dev.parent)
91
92struct request_queue;
93struct sas_rphy {
94 struct device dev;
95 struct sas_identify identify;
96 struct list_head list;
97 struct request_queue *q;
98 u32 scsi_target_id;
99};
100
101#define dev_to_rphy(d) \
102 container_of((d), struct sas_rphy, dev)
103#define transport_class_to_rphy(dev) \
104 dev_to_rphy((dev)->parent)
105#define rphy_to_shost(rphy) \
106 dev_to_shost((rphy)->dev.parent)
107#define target_to_rphy(targ) \
108 dev_to_rphy((targ)->dev.parent)
109
110struct sas_end_device {
111 struct sas_rphy rphy;
112 /* flags */
113 unsigned ready_led_meaning:1;
114 unsigned tlr_supported:1;
115 unsigned tlr_enabled:1;
116 /* parameters */
117 u16 I_T_nexus_loss_timeout;
118 u16 initiator_response_timeout;
119};
120#define rphy_to_end_device(r) \
121 container_of((r), struct sas_end_device, rphy)
122
123struct sas_expander_device {
124 int level;
125 int next_port_id;
126
127 #define SAS_EXPANDER_VENDOR_ID_LEN 8
128 char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
129 #define SAS_EXPANDER_PRODUCT_ID_LEN 16
130 char product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
131 #define SAS_EXPANDER_PRODUCT_REV_LEN 4
132 char product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
133 #define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN 8
134 char component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
135 u16 component_id;
136 u8 component_revision_id;
137
138 struct sas_rphy rphy;
139
140};
141#define rphy_to_expander_device(r) \
142 container_of((r), struct sas_expander_device, rphy)
143
144struct sas_port {
145 struct device dev;
146
147 int port_identifier;
148 int num_phys;
149 /* port flags */
150 unsigned int is_backlink:1;
151
152 /* the other end of the link */
153 struct sas_rphy *rphy;
154
155 struct mutex phy_list_mutex;
156 struct list_head phy_list;
157};
158
159#define dev_to_sas_port(d) \
160 container_of((d), struct sas_port, dev)
161#define transport_class_to_sas_port(dev) \
162 dev_to_sas_port((dev)->parent)
163
164struct sas_phy_linkrates {
165 enum sas_linkrate maximum_linkrate;
166 enum sas_linkrate minimum_linkrate;
167};
168
169/* The functions by which the transport class and the driver communicate */
170struct sas_function_template {
171 int (*get_linkerrors)(struct sas_phy *);
172 int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
173 int (*get_bay_identifier)(struct sas_rphy *);
174 int (*phy_reset)(struct sas_phy *, int);
175 int (*phy_enable)(struct sas_phy *, int);
176 int (*phy_setup)(struct sas_phy *);
177 void (*phy_release)(struct sas_phy *);
178 int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
179 int (*smp_handler)(struct Scsi_Host *, struct sas_rphy *, struct request *);
180};
181
182
183void sas_remove_children(struct device *);
184extern void sas_remove_host(struct Scsi_Host *);
185
186extern struct sas_phy *sas_phy_alloc(struct device *, int);
187extern void sas_phy_free(struct sas_phy *);
188extern int sas_phy_add(struct sas_phy *);
189extern void sas_phy_delete(struct sas_phy *);
190extern int scsi_is_sas_phy(const struct device *);
191
192u64 sas_get_address(struct scsi_device *);
193unsigned int sas_tlr_supported(struct scsi_device *);
194unsigned int sas_is_tlr_enabled(struct scsi_device *);
195void sas_disable_tlr(struct scsi_device *);
196void sas_enable_tlr(struct scsi_device *);
197
198extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
199extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
200void sas_rphy_free(struct sas_rphy *);
201extern int sas_rphy_add(struct sas_rphy *);
202extern void sas_rphy_remove(struct sas_rphy *);
203extern void sas_rphy_delete(struct sas_rphy *);
204extern void sas_rphy_unlink(struct sas_rphy *);
205
206struct sas_port *sas_port_alloc(struct device *, int);
207struct sas_port *sas_port_alloc_num(struct device *);
208int sas_port_add(struct sas_port *);
209void sas_port_free(struct sas_port *);
210void sas_port_delete(struct sas_port *);
211void sas_port_add_phy(struct sas_port *, struct sas_phy *);
212void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
213void sas_port_mark_backlink(struct sas_port *);
214int scsi_is_sas_port(const struct device *);
215struct sas_phy *sas_port_get_phy(struct sas_port *port);
216static inline void sas_port_put_phy(struct sas_phy *phy)
217{
218 if (phy)
219 put_device(&phy->dev);
220}
221
222extern struct scsi_transport_template *
223sas_attach_transport(struct sas_function_template *);
224extern void sas_release_transport(struct scsi_transport_template *);
225int sas_read_port_mode_page(struct scsi_device *);
226
227static inline int
228scsi_is_sas_expander_device(struct device *dev)
229{
230 struct sas_rphy *rphy;
231 if (!scsi_is_sas_rphy(dev))
232 return 0;
233 rphy = dev_to_rphy(dev);
234 return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
235 rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
236}
237
238#define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent)
239
240#endif /* SCSI_TRANSPORT_SAS_H */