Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Driver for Datafab USB Compact Flash reader
4 *
5 * datafab driver v0.1:
6 *
7 * First release
8 *
9 * Current development and maintenance by:
10 * (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org)
11 *
12 * Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver
13 * which I used as a template for this driver.
14 *
15 * Some bugfixes and scatter-gather code by Gregory P. Smith
16 * (greg-usb@electricrain.com)
17 *
18 * Fix for media change by Joerg Schneider (js@joergschneider.com)
19 *
20 * Other contributors:
21 * (c) 2002 Alan Stern <stern@rowland.org>
22 */
23
24/*
25 * This driver attempts to support USB CompactFlash reader/writer devices
26 * based on Datafab USB-to-ATA chips. It was specifically developed for the
27 * Datafab MDCFE-B USB CompactFlash reader but has since been found to work
28 * with a variety of Datafab-based devices from a number of manufacturers.
29 * I've received a report of this driver working with a Datafab-based
30 * SmartMedia device though please be aware that I'm personally unable to
31 * test SmartMedia support.
32 *
33 * This driver supports reading and writing. If you're truly paranoid,
34 * however, you can force the driver into a write-protected state by setting
35 * the WP enable bits in datafab_handle_mode_sense(). See the comments
36 * in that routine.
37 */
38
39#include <linux/errno.h>
40#include <linux/module.h>
41#include <linux/slab.h>
42
43#include <scsi/scsi.h>
44#include <scsi/scsi_cmnd.h>
45
46#include "usb.h"
47#include "transport.h"
48#include "protocol.h"
49#include "debug.h"
50#include "scsiglue.h"
51
52#define DRV_NAME "ums-datafab"
53
54MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader");
55MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>");
56MODULE_LICENSE("GPL");
57MODULE_IMPORT_NS(USB_STORAGE);
58
59struct datafab_info {
60 unsigned long sectors; /* total sector count */
61 unsigned long ssize; /* sector size in bytes */
62 signed char lun; /* used for dual-slot readers */
63
64 /* the following aren't used yet */
65 unsigned char sense_key;
66 unsigned long sense_asc; /* additional sense code */
67 unsigned long sense_ascq; /* additional sense code qualifier */
68};
69
70static int datafab_determine_lun(struct us_data *us,
71 struct datafab_info *info);
72
73
74/*
75 * The table of devices
76 */
77#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
78 vendorName, productName, useProtocol, useTransport, \
79 initFunction, flags) \
80{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
81 .driver_info = (flags) }
82
83static struct usb_device_id datafab_usb_ids[] = {
84# include "unusual_datafab.h"
85 { } /* Terminating entry */
86};
87MODULE_DEVICE_TABLE(usb, datafab_usb_ids);
88
89#undef UNUSUAL_DEV
90
91/*
92 * The flags table
93 */
94#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
95 vendor_name, product_name, use_protocol, use_transport, \
96 init_function, Flags) \
97{ \
98 .vendorName = vendor_name, \
99 .productName = product_name, \
100 .useProtocol = use_protocol, \
101 .useTransport = use_transport, \
102 .initFunction = init_function, \
103}
104
105static struct us_unusual_dev datafab_unusual_dev_list[] = {
106# include "unusual_datafab.h"
107 { } /* Terminating entry */
108};
109
110#undef UNUSUAL_DEV
111
112
113static inline int
114datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) {
115 if (len == 0)
116 return USB_STOR_XFER_GOOD;
117
118 usb_stor_dbg(us, "len = %d\n", len);
119 return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
120 data, len, NULL);
121}
122
123
124static inline int
125datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) {
126 if (len == 0)
127 return USB_STOR_XFER_GOOD;
128
129 usb_stor_dbg(us, "len = %d\n", len);
130 return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
131 data, len, NULL);
132}
133
134
135static int datafab_read_data(struct us_data *us,
136 struct datafab_info *info,
137 u32 sector,
138 u32 sectors)
139{
140 unsigned char *command = us->iobuf;
141 unsigned char *buffer;
142 unsigned char thistime;
143 unsigned int totallen, alloclen;
144 int len, result;
145 unsigned int sg_offset = 0;
146 struct scatterlist *sg = NULL;
147
148 // we're working in LBA mode. according to the ATA spec,
149 // we can support up to 28-bit addressing. I don't know if Datafab
150 // supports beyond 24-bit addressing. It's kind of hard to test
151 // since it requires > 8GB CF card.
152 //
153 if (sectors > 0x0FFFFFFF)
154 return USB_STOR_TRANSPORT_ERROR;
155
156 if (info->lun == -1) {
157 result = datafab_determine_lun(us, info);
158 if (result != USB_STOR_TRANSPORT_GOOD)
159 return result;
160 }
161
162 totallen = sectors * info->ssize;
163
164 // Since we don't read more than 64 KB at a time, we have to create
165 // a bounce buffer and move the data a piece at a time between the
166 // bounce buffer and the actual transfer buffer.
167
168 alloclen = min(totallen, 65536u);
169 buffer = kmalloc(alloclen, GFP_NOIO);
170 if (buffer == NULL)
171 return USB_STOR_TRANSPORT_ERROR;
172
173 do {
174 // loop, never allocate or transfer more than 64k at once
175 // (min(128k, 255*info->ssize) is the real limit)
176
177 len = min(totallen, alloclen);
178 thistime = (len / info->ssize) & 0xff;
179
180 command[0] = 0;
181 command[1] = thistime;
182 command[2] = sector & 0xFF;
183 command[3] = (sector >> 8) & 0xFF;
184 command[4] = (sector >> 16) & 0xFF;
185
186 command[5] = 0xE0 + (info->lun << 4);
187 command[5] |= (sector >> 24) & 0x0F;
188 command[6] = 0x20;
189 command[7] = 0x01;
190
191 // send the read command
192 result = datafab_bulk_write(us, command, 8);
193 if (result != USB_STOR_XFER_GOOD)
194 goto leave;
195
196 // read the result
197 result = datafab_bulk_read(us, buffer, len);
198 if (result != USB_STOR_XFER_GOOD)
199 goto leave;
200
201 // Store the data in the transfer buffer
202 usb_stor_access_xfer_buf(buffer, len, us->srb,
203 &sg, &sg_offset, TO_XFER_BUF);
204
205 sector += thistime;
206 totallen -= len;
207 } while (totallen > 0);
208
209 kfree(buffer);
210 return USB_STOR_TRANSPORT_GOOD;
211
212 leave:
213 kfree(buffer);
214 return USB_STOR_TRANSPORT_ERROR;
215}
216
217
218static int datafab_write_data(struct us_data *us,
219 struct datafab_info *info,
220 u32 sector,
221 u32 sectors)
222{
223 unsigned char *command = us->iobuf;
224 unsigned char *reply = us->iobuf;
225 unsigned char *buffer;
226 unsigned char thistime;
227 unsigned int totallen, alloclen;
228 int len, result;
229 unsigned int sg_offset = 0;
230 struct scatterlist *sg = NULL;
231
232 // we're working in LBA mode. according to the ATA spec,
233 // we can support up to 28-bit addressing. I don't know if Datafab
234 // supports beyond 24-bit addressing. It's kind of hard to test
235 // since it requires > 8GB CF card.
236 //
237 if (sectors > 0x0FFFFFFF)
238 return USB_STOR_TRANSPORT_ERROR;
239
240 if (info->lun == -1) {
241 result = datafab_determine_lun(us, info);
242 if (result != USB_STOR_TRANSPORT_GOOD)
243 return result;
244 }
245
246 totallen = sectors * info->ssize;
247
248 // Since we don't write more than 64 KB at a time, we have to create
249 // a bounce buffer and move the data a piece at a time between the
250 // bounce buffer and the actual transfer buffer.
251
252 alloclen = min(totallen, 65536u);
253 buffer = kmalloc(alloclen, GFP_NOIO);
254 if (buffer == NULL)
255 return USB_STOR_TRANSPORT_ERROR;
256
257 do {
258 // loop, never allocate or transfer more than 64k at once
259 // (min(128k, 255*info->ssize) is the real limit)
260
261 len = min(totallen, alloclen);
262 thistime = (len / info->ssize) & 0xff;
263
264 // Get the data from the transfer buffer
265 usb_stor_access_xfer_buf(buffer, len, us->srb,
266 &sg, &sg_offset, FROM_XFER_BUF);
267
268 command[0] = 0;
269 command[1] = thistime;
270 command[2] = sector & 0xFF;
271 command[3] = (sector >> 8) & 0xFF;
272 command[4] = (sector >> 16) & 0xFF;
273
274 command[5] = 0xE0 + (info->lun << 4);
275 command[5] |= (sector >> 24) & 0x0F;
276 command[6] = 0x30;
277 command[7] = 0x02;
278
279 // send the command
280 result = datafab_bulk_write(us, command, 8);
281 if (result != USB_STOR_XFER_GOOD)
282 goto leave;
283
284 // send the data
285 result = datafab_bulk_write(us, buffer, len);
286 if (result != USB_STOR_XFER_GOOD)
287 goto leave;
288
289 // read the result
290 result = datafab_bulk_read(us, reply, 2);
291 if (result != USB_STOR_XFER_GOOD)
292 goto leave;
293
294 if (reply[0] != 0x50 && reply[1] != 0) {
295 usb_stor_dbg(us, "Gah! write return code: %02x %02x\n",
296 reply[0], reply[1]);
297 result = USB_STOR_TRANSPORT_ERROR;
298 goto leave;
299 }
300
301 sector += thistime;
302 totallen -= len;
303 } while (totallen > 0);
304
305 kfree(buffer);
306 return USB_STOR_TRANSPORT_GOOD;
307
308 leave:
309 kfree(buffer);
310 return USB_STOR_TRANSPORT_ERROR;
311}
312
313
314static int datafab_determine_lun(struct us_data *us,
315 struct datafab_info *info)
316{
317 // Dual-slot readers can be thought of as dual-LUN devices.
318 // We need to determine which card slot is being used.
319 // We'll send an IDENTIFY DEVICE command and see which LUN responds...
320 //
321 // There might be a better way of doing this?
322
323 static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 };
324 unsigned char *command = us->iobuf;
325 unsigned char *buf;
326 int count = 0, rc;
327
328 if (!info)
329 return USB_STOR_TRANSPORT_ERROR;
330
331 memcpy(command, scommand, 8);
332 buf = kmalloc(512, GFP_NOIO);
333 if (!buf)
334 return USB_STOR_TRANSPORT_ERROR;
335
336 usb_stor_dbg(us, "locating...\n");
337
338 // we'll try 3 times before giving up...
339 //
340 while (count++ < 3) {
341 command[5] = 0xa0;
342
343 rc = datafab_bulk_write(us, command, 8);
344 if (rc != USB_STOR_XFER_GOOD) {
345 rc = USB_STOR_TRANSPORT_ERROR;
346 goto leave;
347 }
348
349 rc = datafab_bulk_read(us, buf, 512);
350 if (rc == USB_STOR_XFER_GOOD) {
351 info->lun = 0;
352 rc = USB_STOR_TRANSPORT_GOOD;
353 goto leave;
354 }
355
356 command[5] = 0xb0;
357
358 rc = datafab_bulk_write(us, command, 8);
359 if (rc != USB_STOR_XFER_GOOD) {
360 rc = USB_STOR_TRANSPORT_ERROR;
361 goto leave;
362 }
363
364 rc = datafab_bulk_read(us, buf, 512);
365 if (rc == USB_STOR_XFER_GOOD) {
366 info->lun = 1;
367 rc = USB_STOR_TRANSPORT_GOOD;
368 goto leave;
369 }
370
371 msleep(20);
372 }
373
374 rc = USB_STOR_TRANSPORT_ERROR;
375
376 leave:
377 kfree(buf);
378 return rc;
379}
380
381static int datafab_id_device(struct us_data *us,
382 struct datafab_info *info)
383{
384 // this is a variation of the ATA "IDENTIFY DEVICE" command...according
385 // to the ATA spec, 'Sector Count' isn't used but the Windows driver
386 // sets this bit so we do too...
387 //
388 static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 };
389 unsigned char *command = us->iobuf;
390 unsigned char *reply;
391 int rc;
392
393 if (!info)
394 return USB_STOR_TRANSPORT_ERROR;
395
396 if (info->lun == -1) {
397 rc = datafab_determine_lun(us, info);
398 if (rc != USB_STOR_TRANSPORT_GOOD)
399 return rc;
400 }
401
402 memcpy(command, scommand, 8);
403 reply = kmalloc(512, GFP_NOIO);
404 if (!reply)
405 return USB_STOR_TRANSPORT_ERROR;
406
407 command[5] += (info->lun << 4);
408
409 rc = datafab_bulk_write(us, command, 8);
410 if (rc != USB_STOR_XFER_GOOD) {
411 rc = USB_STOR_TRANSPORT_ERROR;
412 goto leave;
413 }
414
415 // we'll go ahead and extract the media capacity while we're here...
416 //
417 rc = datafab_bulk_read(us, reply, 512);
418 if (rc == USB_STOR_XFER_GOOD) {
419 // capacity is at word offset 57-58
420 //
421 info->sectors = ((u32)(reply[117]) << 24) |
422 ((u32)(reply[116]) << 16) |
423 ((u32)(reply[115]) << 8) |
424 ((u32)(reply[114]) );
425 rc = USB_STOR_TRANSPORT_GOOD;
426 goto leave;
427 }
428
429 rc = USB_STOR_TRANSPORT_ERROR;
430
431 leave:
432 kfree(reply);
433 return rc;
434}
435
436
437static int datafab_handle_mode_sense(struct us_data *us,
438 struct scsi_cmnd * srb,
439 int sense_6)
440{
441 static unsigned char rw_err_page[12] = {
442 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0
443 };
444 static unsigned char cache_page[12] = {
445 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0
446 };
447 static unsigned char rbac_page[12] = {
448 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0
449 };
450 static unsigned char timer_page[8] = {
451 0x1C, 0x6, 0, 0, 0, 0
452 };
453 unsigned char pc, page_code;
454 unsigned int i = 0;
455 struct datafab_info *info = (struct datafab_info *) (us->extra);
456 unsigned char *ptr = us->iobuf;
457
458 // most of this stuff is just a hack to get things working. the
459 // datafab reader doesn't present a SCSI interface so we
460 // fudge the SCSI commands...
461 //
462
463 pc = srb->cmnd[2] >> 6;
464 page_code = srb->cmnd[2] & 0x3F;
465
466 switch (pc) {
467 case 0x0:
468 usb_stor_dbg(us, "Current values\n");
469 break;
470 case 0x1:
471 usb_stor_dbg(us, "Changeable values\n");
472 break;
473 case 0x2:
474 usb_stor_dbg(us, "Default values\n");
475 break;
476 case 0x3:
477 usb_stor_dbg(us, "Saves values\n");
478 break;
479 }
480
481 memset(ptr, 0, 8);
482 if (sense_6) {
483 ptr[2] = 0x00; // WP enable: 0x80
484 i = 4;
485 } else {
486 ptr[3] = 0x00; // WP enable: 0x80
487 i = 8;
488 }
489
490 switch (page_code) {
491 default:
492 // vendor-specific mode
493 info->sense_key = 0x05;
494 info->sense_asc = 0x24;
495 info->sense_ascq = 0x00;
496 return USB_STOR_TRANSPORT_FAILED;
497
498 case 0x1:
499 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
500 i += sizeof(rw_err_page);
501 break;
502
503 case 0x8:
504 memcpy(ptr + i, cache_page, sizeof(cache_page));
505 i += sizeof(cache_page);
506 break;
507
508 case 0x1B:
509 memcpy(ptr + i, rbac_page, sizeof(rbac_page));
510 i += sizeof(rbac_page);
511 break;
512
513 case 0x1C:
514 memcpy(ptr + i, timer_page, sizeof(timer_page));
515 i += sizeof(timer_page);
516 break;
517
518 case 0x3F: // retrieve all pages
519 memcpy(ptr + i, timer_page, sizeof(timer_page));
520 i += sizeof(timer_page);
521 memcpy(ptr + i, rbac_page, sizeof(rbac_page));
522 i += sizeof(rbac_page);
523 memcpy(ptr + i, cache_page, sizeof(cache_page));
524 i += sizeof(cache_page);
525 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
526 i += sizeof(rw_err_page);
527 break;
528 }
529
530 if (sense_6)
531 ptr[0] = i - 1;
532 else
533 ((__be16 *) ptr)[0] = cpu_to_be16(i - 2);
534 usb_stor_set_xfer_buf(ptr, i, srb);
535
536 return USB_STOR_TRANSPORT_GOOD;
537}
538
539static void datafab_info_destructor(void *extra)
540{
541 // this routine is a placeholder...
542 // currently, we don't allocate any extra memory so we're okay
543}
544
545
546// Transport for the Datafab MDCFE-B
547//
548static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us)
549{
550 struct datafab_info *info;
551 int rc;
552 unsigned long block, blocks;
553 unsigned char *ptr = us->iobuf;
554 static unsigned char inquiry_reply[8] = {
555 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
556 };
557
558 if (!us->extra) {
559 us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO);
560 if (!us->extra)
561 return USB_STOR_TRANSPORT_ERROR;
562
563 us->extra_destructor = datafab_info_destructor;
564 ((struct datafab_info *)us->extra)->lun = -1;
565 }
566
567 info = (struct datafab_info *) (us->extra);
568
569 if (srb->cmnd[0] == INQUIRY) {
570 usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
571 memcpy(ptr, inquiry_reply, sizeof(inquiry_reply));
572 fill_inquiry_response(us, ptr, 36);
573 return USB_STOR_TRANSPORT_GOOD;
574 }
575
576 if (srb->cmnd[0] == READ_CAPACITY) {
577 info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec
578 rc = datafab_id_device(us, info);
579 if (rc != USB_STOR_TRANSPORT_GOOD)
580 return rc;
581
582 usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
583 info->sectors, info->ssize);
584
585 // build the reply
586 // we need the last sector, not the number of sectors
587 ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
588 ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
589 usb_stor_set_xfer_buf(ptr, 8, srb);
590
591 return USB_STOR_TRANSPORT_GOOD;
592 }
593
594 if (srb->cmnd[0] == MODE_SELECT_10) {
595 usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
596 return USB_STOR_TRANSPORT_ERROR;
597 }
598
599 // don't bother implementing READ_6 or WRITE_6.
600 //
601 if (srb->cmnd[0] == READ_10) {
602 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
603 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
604
605 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
606
607 usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n",
608 block, blocks);
609 return datafab_read_data(us, info, block, blocks);
610 }
611
612 if (srb->cmnd[0] == READ_12) {
613 // we'll probably never see a READ_12 but we'll do it anyway...
614 //
615 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
616 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
617
618 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
619 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
620
621 usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n",
622 block, blocks);
623 return datafab_read_data(us, info, block, blocks);
624 }
625
626 if (srb->cmnd[0] == WRITE_10) {
627 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
628 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
629
630 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
631
632 usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n",
633 block, blocks);
634 return datafab_write_data(us, info, block, blocks);
635 }
636
637 if (srb->cmnd[0] == WRITE_12) {
638 // we'll probably never see a WRITE_12 but we'll do it anyway...
639 //
640 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
641 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
642
643 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
644 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
645
646 usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n",
647 block, blocks);
648 return datafab_write_data(us, info, block, blocks);
649 }
650
651 if (srb->cmnd[0] == TEST_UNIT_READY) {
652 usb_stor_dbg(us, "TEST_UNIT_READY\n");
653 return datafab_id_device(us, info);
654 }
655
656 if (srb->cmnd[0] == REQUEST_SENSE) {
657 usb_stor_dbg(us, "REQUEST_SENSE - Returning faked response\n");
658
659 // this response is pretty bogus right now. eventually if necessary
660 // we can set the correct sense data. so far though it hasn't been
661 // necessary
662 //
663 memset(ptr, 0, 18);
664 ptr[0] = 0xF0;
665 ptr[2] = info->sense_key;
666 ptr[7] = 11;
667 ptr[12] = info->sense_asc;
668 ptr[13] = info->sense_ascq;
669 usb_stor_set_xfer_buf(ptr, 18, srb);
670
671 return USB_STOR_TRANSPORT_GOOD;
672 }
673
674 if (srb->cmnd[0] == MODE_SENSE) {
675 usb_stor_dbg(us, "MODE_SENSE_6 detected\n");
676 return datafab_handle_mode_sense(us, srb, 1);
677 }
678
679 if (srb->cmnd[0] == MODE_SENSE_10) {
680 usb_stor_dbg(us, "MODE_SENSE_10 detected\n");
681 return datafab_handle_mode_sense(us, srb, 0);
682 }
683
684 if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
685 /*
686 * sure. whatever. not like we can stop the user from
687 * popping the media out of the device (no locking doors, etc)
688 */
689 return USB_STOR_TRANSPORT_GOOD;
690 }
691
692 if (srb->cmnd[0] == START_STOP) {
693 /*
694 * this is used by sd.c'check_scsidisk_media_change to detect
695 * media change
696 */
697 usb_stor_dbg(us, "START_STOP\n");
698 /*
699 * the first datafab_id_device after a media change returns
700 * an error (determined experimentally)
701 */
702 rc = datafab_id_device(us, info);
703 if (rc == USB_STOR_TRANSPORT_GOOD) {
704 info->sense_key = NO_SENSE;
705 srb->result = SUCCESS;
706 } else {
707 info->sense_key = UNIT_ATTENTION;
708 srb->result = SAM_STAT_CHECK_CONDITION;
709 }
710 return rc;
711 }
712
713 usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
714 srb->cmnd[0], srb->cmnd[0]);
715 info->sense_key = 0x05;
716 info->sense_asc = 0x20;
717 info->sense_ascq = 0x00;
718 return USB_STOR_TRANSPORT_FAILED;
719}
720
721static struct scsi_host_template datafab_host_template;
722
723static int datafab_probe(struct usb_interface *intf,
724 const struct usb_device_id *id)
725{
726 struct us_data *us;
727 int result;
728
729 result = usb_stor_probe1(&us, intf, id,
730 (id - datafab_usb_ids) + datafab_unusual_dev_list,
731 &datafab_host_template);
732 if (result)
733 return result;
734
735 us->transport_name = "Datafab Bulk-Only";
736 us->transport = datafab_transport;
737 us->transport_reset = usb_stor_Bulk_reset;
738 us->max_lun = 1;
739
740 result = usb_stor_probe2(us);
741 return result;
742}
743
744static struct usb_driver datafab_driver = {
745 .name = DRV_NAME,
746 .probe = datafab_probe,
747 .disconnect = usb_stor_disconnect,
748 .suspend = usb_stor_suspend,
749 .resume = usb_stor_resume,
750 .reset_resume = usb_stor_reset_resume,
751 .pre_reset = usb_stor_pre_reset,
752 .post_reset = usb_stor_post_reset,
753 .id_table = datafab_usb_ids,
754 .soft_unbind = 1,
755 .no_dynamic_id = 1,
756};
757
758module_usb_stor_driver(datafab_driver, datafab_host_template, DRV_NAME);
1/*
2 * Driver for Datafab USB Compact Flash reader
3 *
4 * datafab driver v0.1:
5 *
6 * First release
7 *
8 * Current development and maintenance by:
9 * (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org)
10 *
11 * Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver
12 * which I used as a template for this driver.
13 *
14 * Some bugfixes and scatter-gather code by Gregory P. Smith
15 * (greg-usb@electricrain.com)
16 *
17 * Fix for media change by Joerg Schneider (js@joergschneider.com)
18 *
19 * Other contributors:
20 * (c) 2002 Alan Stern <stern@rowland.org>
21 *
22 * This program is free software; you can redistribute it and/or modify it
23 * under the terms of the GNU General Public License as published by the
24 * Free Software Foundation; either version 2, or (at your option) any
25 * later version.
26 *
27 * This program is distributed in the hope that it will be useful, but
28 * WITHOUT ANY WARRANTY; without even the implied warranty of
29 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
30 * General Public License for more details.
31 *
32 * You should have received a copy of the GNU General Public License along
33 * with this program; if not, write to the Free Software Foundation, Inc.,
34 * 675 Mass Ave, Cambridge, MA 02139, USA.
35 */
36
37/*
38 * This driver attempts to support USB CompactFlash reader/writer devices
39 * based on Datafab USB-to-ATA chips. It was specifically developed for the
40 * Datafab MDCFE-B USB CompactFlash reader but has since been found to work
41 * with a variety of Datafab-based devices from a number of manufacturers.
42 * I've received a report of this driver working with a Datafab-based
43 * SmartMedia device though please be aware that I'm personally unable to
44 * test SmartMedia support.
45 *
46 * This driver supports reading and writing. If you're truly paranoid,
47 * however, you can force the driver into a write-protected state by setting
48 * the WP enable bits in datafab_handle_mode_sense(). See the comments
49 * in that routine.
50 */
51
52#include <linux/errno.h>
53#include <linux/module.h>
54#include <linux/slab.h>
55
56#include <scsi/scsi.h>
57#include <scsi/scsi_cmnd.h>
58
59#include "usb.h"
60#include "transport.h"
61#include "protocol.h"
62#include "debug.h"
63#include "scsiglue.h"
64
65#define DRV_NAME "ums-datafab"
66
67MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader");
68MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>");
69MODULE_LICENSE("GPL");
70
71struct datafab_info {
72 unsigned long sectors; /* total sector count */
73 unsigned long ssize; /* sector size in bytes */
74 signed char lun; /* used for dual-slot readers */
75
76 /* the following aren't used yet */
77 unsigned char sense_key;
78 unsigned long sense_asc; /* additional sense code */
79 unsigned long sense_ascq; /* additional sense code qualifier */
80};
81
82static int datafab_determine_lun(struct us_data *us,
83 struct datafab_info *info);
84
85
86/*
87 * The table of devices
88 */
89#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
90 vendorName, productName, useProtocol, useTransport, \
91 initFunction, flags) \
92{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
93 .driver_info = (flags) }
94
95static struct usb_device_id datafab_usb_ids[] = {
96# include "unusual_datafab.h"
97 { } /* Terminating entry */
98};
99MODULE_DEVICE_TABLE(usb, datafab_usb_ids);
100
101#undef UNUSUAL_DEV
102
103/*
104 * The flags table
105 */
106#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
107 vendor_name, product_name, use_protocol, use_transport, \
108 init_function, Flags) \
109{ \
110 .vendorName = vendor_name, \
111 .productName = product_name, \
112 .useProtocol = use_protocol, \
113 .useTransport = use_transport, \
114 .initFunction = init_function, \
115}
116
117static struct us_unusual_dev datafab_unusual_dev_list[] = {
118# include "unusual_datafab.h"
119 { } /* Terminating entry */
120};
121
122#undef UNUSUAL_DEV
123
124
125static inline int
126datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) {
127 if (len == 0)
128 return USB_STOR_XFER_GOOD;
129
130 usb_stor_dbg(us, "len = %d\n", len);
131 return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
132 data, len, NULL);
133}
134
135
136static inline int
137datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) {
138 if (len == 0)
139 return USB_STOR_XFER_GOOD;
140
141 usb_stor_dbg(us, "len = %d\n", len);
142 return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
143 data, len, NULL);
144}
145
146
147static int datafab_read_data(struct us_data *us,
148 struct datafab_info *info,
149 u32 sector,
150 u32 sectors)
151{
152 unsigned char *command = us->iobuf;
153 unsigned char *buffer;
154 unsigned char thistime;
155 unsigned int totallen, alloclen;
156 int len, result;
157 unsigned int sg_offset = 0;
158 struct scatterlist *sg = NULL;
159
160 // we're working in LBA mode. according to the ATA spec,
161 // we can support up to 28-bit addressing. I don't know if Datafab
162 // supports beyond 24-bit addressing. It's kind of hard to test
163 // since it requires > 8GB CF card.
164 //
165 if (sectors > 0x0FFFFFFF)
166 return USB_STOR_TRANSPORT_ERROR;
167
168 if (info->lun == -1) {
169 result = datafab_determine_lun(us, info);
170 if (result != USB_STOR_TRANSPORT_GOOD)
171 return result;
172 }
173
174 totallen = sectors * info->ssize;
175
176 // Since we don't read more than 64 KB at a time, we have to create
177 // a bounce buffer and move the data a piece at a time between the
178 // bounce buffer and the actual transfer buffer.
179
180 alloclen = min(totallen, 65536u);
181 buffer = kmalloc(alloclen, GFP_NOIO);
182 if (buffer == NULL)
183 return USB_STOR_TRANSPORT_ERROR;
184
185 do {
186 // loop, never allocate or transfer more than 64k at once
187 // (min(128k, 255*info->ssize) is the real limit)
188
189 len = min(totallen, alloclen);
190 thistime = (len / info->ssize) & 0xff;
191
192 command[0] = 0;
193 command[1] = thistime;
194 command[2] = sector & 0xFF;
195 command[3] = (sector >> 8) & 0xFF;
196 command[4] = (sector >> 16) & 0xFF;
197
198 command[5] = 0xE0 + (info->lun << 4);
199 command[5] |= (sector >> 24) & 0x0F;
200 command[6] = 0x20;
201 command[7] = 0x01;
202
203 // send the read command
204 result = datafab_bulk_write(us, command, 8);
205 if (result != USB_STOR_XFER_GOOD)
206 goto leave;
207
208 // read the result
209 result = datafab_bulk_read(us, buffer, len);
210 if (result != USB_STOR_XFER_GOOD)
211 goto leave;
212
213 // Store the data in the transfer buffer
214 usb_stor_access_xfer_buf(buffer, len, us->srb,
215 &sg, &sg_offset, TO_XFER_BUF);
216
217 sector += thistime;
218 totallen -= len;
219 } while (totallen > 0);
220
221 kfree(buffer);
222 return USB_STOR_TRANSPORT_GOOD;
223
224 leave:
225 kfree(buffer);
226 return USB_STOR_TRANSPORT_ERROR;
227}
228
229
230static int datafab_write_data(struct us_data *us,
231 struct datafab_info *info,
232 u32 sector,
233 u32 sectors)
234{
235 unsigned char *command = us->iobuf;
236 unsigned char *reply = us->iobuf;
237 unsigned char *buffer;
238 unsigned char thistime;
239 unsigned int totallen, alloclen;
240 int len, result;
241 unsigned int sg_offset = 0;
242 struct scatterlist *sg = NULL;
243
244 // we're working in LBA mode. according to the ATA spec,
245 // we can support up to 28-bit addressing. I don't know if Datafab
246 // supports beyond 24-bit addressing. It's kind of hard to test
247 // since it requires > 8GB CF card.
248 //
249 if (sectors > 0x0FFFFFFF)
250 return USB_STOR_TRANSPORT_ERROR;
251
252 if (info->lun == -1) {
253 result = datafab_determine_lun(us, info);
254 if (result != USB_STOR_TRANSPORT_GOOD)
255 return result;
256 }
257
258 totallen = sectors * info->ssize;
259
260 // Since we don't write more than 64 KB at a time, we have to create
261 // a bounce buffer and move the data a piece at a time between the
262 // bounce buffer and the actual transfer buffer.
263
264 alloclen = min(totallen, 65536u);
265 buffer = kmalloc(alloclen, GFP_NOIO);
266 if (buffer == NULL)
267 return USB_STOR_TRANSPORT_ERROR;
268
269 do {
270 // loop, never allocate or transfer more than 64k at once
271 // (min(128k, 255*info->ssize) is the real limit)
272
273 len = min(totallen, alloclen);
274 thistime = (len / info->ssize) & 0xff;
275
276 // Get the data from the transfer buffer
277 usb_stor_access_xfer_buf(buffer, len, us->srb,
278 &sg, &sg_offset, FROM_XFER_BUF);
279
280 command[0] = 0;
281 command[1] = thistime;
282 command[2] = sector & 0xFF;
283 command[3] = (sector >> 8) & 0xFF;
284 command[4] = (sector >> 16) & 0xFF;
285
286 command[5] = 0xE0 + (info->lun << 4);
287 command[5] |= (sector >> 24) & 0x0F;
288 command[6] = 0x30;
289 command[7] = 0x02;
290
291 // send the command
292 result = datafab_bulk_write(us, command, 8);
293 if (result != USB_STOR_XFER_GOOD)
294 goto leave;
295
296 // send the data
297 result = datafab_bulk_write(us, buffer, len);
298 if (result != USB_STOR_XFER_GOOD)
299 goto leave;
300
301 // read the result
302 result = datafab_bulk_read(us, reply, 2);
303 if (result != USB_STOR_XFER_GOOD)
304 goto leave;
305
306 if (reply[0] != 0x50 && reply[1] != 0) {
307 usb_stor_dbg(us, "Gah! write return code: %02x %02x\n",
308 reply[0], reply[1]);
309 result = USB_STOR_TRANSPORT_ERROR;
310 goto leave;
311 }
312
313 sector += thistime;
314 totallen -= len;
315 } while (totallen > 0);
316
317 kfree(buffer);
318 return USB_STOR_TRANSPORT_GOOD;
319
320 leave:
321 kfree(buffer);
322 return USB_STOR_TRANSPORT_ERROR;
323}
324
325
326static int datafab_determine_lun(struct us_data *us,
327 struct datafab_info *info)
328{
329 // Dual-slot readers can be thought of as dual-LUN devices.
330 // We need to determine which card slot is being used.
331 // We'll send an IDENTIFY DEVICE command and see which LUN responds...
332 //
333 // There might be a better way of doing this?
334
335 static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 };
336 unsigned char *command = us->iobuf;
337 unsigned char *buf;
338 int count = 0, rc;
339
340 if (!info)
341 return USB_STOR_TRANSPORT_ERROR;
342
343 memcpy(command, scommand, 8);
344 buf = kmalloc(512, GFP_NOIO);
345 if (!buf)
346 return USB_STOR_TRANSPORT_ERROR;
347
348 usb_stor_dbg(us, "locating...\n");
349
350 // we'll try 3 times before giving up...
351 //
352 while (count++ < 3) {
353 command[5] = 0xa0;
354
355 rc = datafab_bulk_write(us, command, 8);
356 if (rc != USB_STOR_XFER_GOOD) {
357 rc = USB_STOR_TRANSPORT_ERROR;
358 goto leave;
359 }
360
361 rc = datafab_bulk_read(us, buf, 512);
362 if (rc == USB_STOR_XFER_GOOD) {
363 info->lun = 0;
364 rc = USB_STOR_TRANSPORT_GOOD;
365 goto leave;
366 }
367
368 command[5] = 0xb0;
369
370 rc = datafab_bulk_write(us, command, 8);
371 if (rc != USB_STOR_XFER_GOOD) {
372 rc = USB_STOR_TRANSPORT_ERROR;
373 goto leave;
374 }
375
376 rc = datafab_bulk_read(us, buf, 512);
377 if (rc == USB_STOR_XFER_GOOD) {
378 info->lun = 1;
379 rc = USB_STOR_TRANSPORT_GOOD;
380 goto leave;
381 }
382
383 msleep(20);
384 }
385
386 rc = USB_STOR_TRANSPORT_ERROR;
387
388 leave:
389 kfree(buf);
390 return rc;
391}
392
393static int datafab_id_device(struct us_data *us,
394 struct datafab_info *info)
395{
396 // this is a variation of the ATA "IDENTIFY DEVICE" command...according
397 // to the ATA spec, 'Sector Count' isn't used but the Windows driver
398 // sets this bit so we do too...
399 //
400 static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 };
401 unsigned char *command = us->iobuf;
402 unsigned char *reply;
403 int rc;
404
405 if (!info)
406 return USB_STOR_TRANSPORT_ERROR;
407
408 if (info->lun == -1) {
409 rc = datafab_determine_lun(us, info);
410 if (rc != USB_STOR_TRANSPORT_GOOD)
411 return rc;
412 }
413
414 memcpy(command, scommand, 8);
415 reply = kmalloc(512, GFP_NOIO);
416 if (!reply)
417 return USB_STOR_TRANSPORT_ERROR;
418
419 command[5] += (info->lun << 4);
420
421 rc = datafab_bulk_write(us, command, 8);
422 if (rc != USB_STOR_XFER_GOOD) {
423 rc = USB_STOR_TRANSPORT_ERROR;
424 goto leave;
425 }
426
427 // we'll go ahead and extract the media capacity while we're here...
428 //
429 rc = datafab_bulk_read(us, reply, 512);
430 if (rc == USB_STOR_XFER_GOOD) {
431 // capacity is at word offset 57-58
432 //
433 info->sectors = ((u32)(reply[117]) << 24) |
434 ((u32)(reply[116]) << 16) |
435 ((u32)(reply[115]) << 8) |
436 ((u32)(reply[114]) );
437 rc = USB_STOR_TRANSPORT_GOOD;
438 goto leave;
439 }
440
441 rc = USB_STOR_TRANSPORT_ERROR;
442
443 leave:
444 kfree(reply);
445 return rc;
446}
447
448
449static int datafab_handle_mode_sense(struct us_data *us,
450 struct scsi_cmnd * srb,
451 int sense_6)
452{
453 static unsigned char rw_err_page[12] = {
454 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0
455 };
456 static unsigned char cache_page[12] = {
457 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0
458 };
459 static unsigned char rbac_page[12] = {
460 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0
461 };
462 static unsigned char timer_page[8] = {
463 0x1C, 0x6, 0, 0, 0, 0
464 };
465 unsigned char pc, page_code;
466 unsigned int i = 0;
467 struct datafab_info *info = (struct datafab_info *) (us->extra);
468 unsigned char *ptr = us->iobuf;
469
470 // most of this stuff is just a hack to get things working. the
471 // datafab reader doesn't present a SCSI interface so we
472 // fudge the SCSI commands...
473 //
474
475 pc = srb->cmnd[2] >> 6;
476 page_code = srb->cmnd[2] & 0x3F;
477
478 switch (pc) {
479 case 0x0:
480 usb_stor_dbg(us, "Current values\n");
481 break;
482 case 0x1:
483 usb_stor_dbg(us, "Changeable values\n");
484 break;
485 case 0x2:
486 usb_stor_dbg(us, "Default values\n");
487 break;
488 case 0x3:
489 usb_stor_dbg(us, "Saves values\n");
490 break;
491 }
492
493 memset(ptr, 0, 8);
494 if (sense_6) {
495 ptr[2] = 0x00; // WP enable: 0x80
496 i = 4;
497 } else {
498 ptr[3] = 0x00; // WP enable: 0x80
499 i = 8;
500 }
501
502 switch (page_code) {
503 default:
504 // vendor-specific mode
505 info->sense_key = 0x05;
506 info->sense_asc = 0x24;
507 info->sense_ascq = 0x00;
508 return USB_STOR_TRANSPORT_FAILED;
509
510 case 0x1:
511 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
512 i += sizeof(rw_err_page);
513 break;
514
515 case 0x8:
516 memcpy(ptr + i, cache_page, sizeof(cache_page));
517 i += sizeof(cache_page);
518 break;
519
520 case 0x1B:
521 memcpy(ptr + i, rbac_page, sizeof(rbac_page));
522 i += sizeof(rbac_page);
523 break;
524
525 case 0x1C:
526 memcpy(ptr + i, timer_page, sizeof(timer_page));
527 i += sizeof(timer_page);
528 break;
529
530 case 0x3F: // retrieve all pages
531 memcpy(ptr + i, timer_page, sizeof(timer_page));
532 i += sizeof(timer_page);
533 memcpy(ptr + i, rbac_page, sizeof(rbac_page));
534 i += sizeof(rbac_page);
535 memcpy(ptr + i, cache_page, sizeof(cache_page));
536 i += sizeof(cache_page);
537 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page));
538 i += sizeof(rw_err_page);
539 break;
540 }
541
542 if (sense_6)
543 ptr[0] = i - 1;
544 else
545 ((__be16 *) ptr)[0] = cpu_to_be16(i - 2);
546 usb_stor_set_xfer_buf(ptr, i, srb);
547
548 return USB_STOR_TRANSPORT_GOOD;
549}
550
551static void datafab_info_destructor(void *extra)
552{
553 // this routine is a placeholder...
554 // currently, we don't allocate any extra memory so we're okay
555}
556
557
558// Transport for the Datafab MDCFE-B
559//
560static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us)
561{
562 struct datafab_info *info;
563 int rc;
564 unsigned long block, blocks;
565 unsigned char *ptr = us->iobuf;
566 static unsigned char inquiry_reply[8] = {
567 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
568 };
569
570 if (!us->extra) {
571 us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO);
572 if (!us->extra)
573 return USB_STOR_TRANSPORT_ERROR;
574
575 us->extra_destructor = datafab_info_destructor;
576 ((struct datafab_info *)us->extra)->lun = -1;
577 }
578
579 info = (struct datafab_info *) (us->extra);
580
581 if (srb->cmnd[0] == INQUIRY) {
582 usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
583 memcpy(ptr, inquiry_reply, sizeof(inquiry_reply));
584 fill_inquiry_response(us, ptr, 36);
585 return USB_STOR_TRANSPORT_GOOD;
586 }
587
588 if (srb->cmnd[0] == READ_CAPACITY) {
589 info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec
590 rc = datafab_id_device(us, info);
591 if (rc != USB_STOR_TRANSPORT_GOOD)
592 return rc;
593
594 usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
595 info->sectors, info->ssize);
596
597 // build the reply
598 // we need the last sector, not the number of sectors
599 ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
600 ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
601 usb_stor_set_xfer_buf(ptr, 8, srb);
602
603 return USB_STOR_TRANSPORT_GOOD;
604 }
605
606 if (srb->cmnd[0] == MODE_SELECT_10) {
607 usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
608 return USB_STOR_TRANSPORT_ERROR;
609 }
610
611 // don't bother implementing READ_6 or WRITE_6.
612 //
613 if (srb->cmnd[0] == READ_10) {
614 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
615 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
616
617 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
618
619 usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n",
620 block, blocks);
621 return datafab_read_data(us, info, block, blocks);
622 }
623
624 if (srb->cmnd[0] == READ_12) {
625 // we'll probably never see a READ_12 but we'll do it anyway...
626 //
627 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
628 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
629
630 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
631 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
632
633 usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n",
634 block, blocks);
635 return datafab_read_data(us, info, block, blocks);
636 }
637
638 if (srb->cmnd[0] == WRITE_10) {
639 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
640 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
641
642 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
643
644 usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n",
645 block, blocks);
646 return datafab_write_data(us, info, block, blocks);
647 }
648
649 if (srb->cmnd[0] == WRITE_12) {
650 // we'll probably never see a WRITE_12 but we'll do it anyway...
651 //
652 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
653 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
654
655 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
656 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
657
658 usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n",
659 block, blocks);
660 return datafab_write_data(us, info, block, blocks);
661 }
662
663 if (srb->cmnd[0] == TEST_UNIT_READY) {
664 usb_stor_dbg(us, "TEST_UNIT_READY\n");
665 return datafab_id_device(us, info);
666 }
667
668 if (srb->cmnd[0] == REQUEST_SENSE) {
669 usb_stor_dbg(us, "REQUEST_SENSE - Returning faked response\n");
670
671 // this response is pretty bogus right now. eventually if necessary
672 // we can set the correct sense data. so far though it hasn't been
673 // necessary
674 //
675 memset(ptr, 0, 18);
676 ptr[0] = 0xF0;
677 ptr[2] = info->sense_key;
678 ptr[7] = 11;
679 ptr[12] = info->sense_asc;
680 ptr[13] = info->sense_ascq;
681 usb_stor_set_xfer_buf(ptr, 18, srb);
682
683 return USB_STOR_TRANSPORT_GOOD;
684 }
685
686 if (srb->cmnd[0] == MODE_SENSE) {
687 usb_stor_dbg(us, "MODE_SENSE_6 detected\n");
688 return datafab_handle_mode_sense(us, srb, 1);
689 }
690
691 if (srb->cmnd[0] == MODE_SENSE_10) {
692 usb_stor_dbg(us, "MODE_SENSE_10 detected\n");
693 return datafab_handle_mode_sense(us, srb, 0);
694 }
695
696 if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
697 /*
698 * sure. whatever. not like we can stop the user from
699 * popping the media out of the device (no locking doors, etc)
700 */
701 return USB_STOR_TRANSPORT_GOOD;
702 }
703
704 if (srb->cmnd[0] == START_STOP) {
705 /*
706 * this is used by sd.c'check_scsidisk_media_change to detect
707 * media change
708 */
709 usb_stor_dbg(us, "START_STOP\n");
710 /*
711 * the first datafab_id_device after a media change returns
712 * an error (determined experimentally)
713 */
714 rc = datafab_id_device(us, info);
715 if (rc == USB_STOR_TRANSPORT_GOOD) {
716 info->sense_key = NO_SENSE;
717 srb->result = SUCCESS;
718 } else {
719 info->sense_key = UNIT_ATTENTION;
720 srb->result = SAM_STAT_CHECK_CONDITION;
721 }
722 return rc;
723 }
724
725 usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
726 srb->cmnd[0], srb->cmnd[0]);
727 info->sense_key = 0x05;
728 info->sense_asc = 0x20;
729 info->sense_ascq = 0x00;
730 return USB_STOR_TRANSPORT_FAILED;
731}
732
733static struct scsi_host_template datafab_host_template;
734
735static int datafab_probe(struct usb_interface *intf,
736 const struct usb_device_id *id)
737{
738 struct us_data *us;
739 int result;
740
741 result = usb_stor_probe1(&us, intf, id,
742 (id - datafab_usb_ids) + datafab_unusual_dev_list,
743 &datafab_host_template);
744 if (result)
745 return result;
746
747 us->transport_name = "Datafab Bulk-Only";
748 us->transport = datafab_transport;
749 us->transport_reset = usb_stor_Bulk_reset;
750 us->max_lun = 1;
751
752 result = usb_stor_probe2(us);
753 return result;
754}
755
756static struct usb_driver datafab_driver = {
757 .name = DRV_NAME,
758 .probe = datafab_probe,
759 .disconnect = usb_stor_disconnect,
760 .suspend = usb_stor_suspend,
761 .resume = usb_stor_resume,
762 .reset_resume = usb_stor_reset_resume,
763 .pre_reset = usb_stor_pre_reset,
764 .post_reset = usb_stor_post_reset,
765 .id_table = datafab_usb_ids,
766 .soft_unbind = 1,
767 .no_dynamic_id = 1,
768};
769
770module_usb_stor_driver(datafab_driver, datafab_host_template, DRV_NAME);