Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Support for emulating SAT (ata pass through) on devices based
4 * on the Cypress USB/ATA bridge supporting ATACB.
5 *
6 * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr)
7 */
8
9#include <linux/module.h>
10#include <scsi/scsi.h>
11#include <scsi/scsi_cmnd.h>
12#include <scsi/scsi_eh.h>
13#include <linux/ata.h>
14
15#include "usb.h"
16#include "protocol.h"
17#include "scsiglue.h"
18#include "debug.h"
19
20#define DRV_NAME "ums-cypress"
21
22MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB");
23MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>");
24MODULE_LICENSE("GPL");
25MODULE_IMPORT_NS(USB_STORAGE);
26
27/*
28 * The table of devices
29 */
30#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
31 vendorName, productName, useProtocol, useTransport, \
32 initFunction, flags) \
33{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
34 .driver_info = (flags) }
35
36static struct usb_device_id cypress_usb_ids[] = {
37# include "unusual_cypress.h"
38 { } /* Terminating entry */
39};
40MODULE_DEVICE_TABLE(usb, cypress_usb_ids);
41
42#undef UNUSUAL_DEV
43
44/*
45 * The flags table
46 */
47#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
48 vendor_name, product_name, use_protocol, use_transport, \
49 init_function, Flags) \
50{ \
51 .vendorName = vendor_name, \
52 .productName = product_name, \
53 .useProtocol = use_protocol, \
54 .useTransport = use_transport, \
55 .initFunction = init_function, \
56}
57
58static struct us_unusual_dev cypress_unusual_dev_list[] = {
59# include "unusual_cypress.h"
60 { } /* Terminating entry */
61};
62
63#undef UNUSUAL_DEV
64
65
66/*
67 * ATACB is a protocol used on cypress usb<->ata bridge to
68 * send raw ATA command over mass storage
69 * There is a ATACB2 protocol that support LBA48 on newer chip.
70 * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf
71 * datasheet from cypress.com.
72 */
73static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
74{
75 unsigned char save_cmnd[MAX_COMMAND_SIZE];
76
77 if (likely(srb->cmnd[0] != ATA_16 && srb->cmnd[0] != ATA_12)) {
78 usb_stor_transparent_scsi_command(srb, us);
79 return;
80 }
81
82 memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd));
83 memset(srb->cmnd, 0, MAX_COMMAND_SIZE);
84
85 /* check if we support the command */
86 if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */
87 goto invalid_fld;
88 /* check protocol */
89 switch ((save_cmnd[1] >> 1) & 0xf) {
90 case 3: /*no DATA */
91 case 4: /* PIO in */
92 case 5: /* PIO out */
93 break;
94 default:
95 goto invalid_fld;
96 }
97
98 /* first build the ATACB command */
99 srb->cmd_len = 16;
100
101 srb->cmnd[0] = 0x24; /*
102 * bVSCBSignature : vendor-specific command
103 * this value can change, but most(all ?) manufacturers
104 * keep the cypress default : 0x24
105 */
106 srb->cmnd[1] = 0x24; /* bVSCBSubCommand : 0x24 for ATACB */
107
108 srb->cmnd[3] = 0xff - 1; /*
109 * features, sector count, lba low, lba med
110 * lba high, device, command are valid
111 */
112 srb->cmnd[4] = 1; /* TransferBlockCount : 512 */
113
114 if (save_cmnd[0] == ATA_16) {
115 srb->cmnd[ 6] = save_cmnd[ 4]; /* features */
116 srb->cmnd[ 7] = save_cmnd[ 6]; /* sector count */
117 srb->cmnd[ 8] = save_cmnd[ 8]; /* lba low */
118 srb->cmnd[ 9] = save_cmnd[10]; /* lba med */
119 srb->cmnd[10] = save_cmnd[12]; /* lba high */
120 srb->cmnd[11] = save_cmnd[13]; /* device */
121 srb->cmnd[12] = save_cmnd[14]; /* command */
122
123 if (save_cmnd[1] & 0x01) {/* extended bit set for LBA48 */
124 /* this could be supported by atacb2 */
125 if (save_cmnd[3] || save_cmnd[5] || save_cmnd[7] || save_cmnd[9]
126 || save_cmnd[11])
127 goto invalid_fld;
128 }
129 } else { /* ATA12 */
130 srb->cmnd[ 6] = save_cmnd[3]; /* features */
131 srb->cmnd[ 7] = save_cmnd[4]; /* sector count */
132 srb->cmnd[ 8] = save_cmnd[5]; /* lba low */
133 srb->cmnd[ 9] = save_cmnd[6]; /* lba med */
134 srb->cmnd[10] = save_cmnd[7]; /* lba high */
135 srb->cmnd[11] = save_cmnd[8]; /* device */
136 srb->cmnd[12] = save_cmnd[9]; /* command */
137
138 }
139 /* Filter SET_FEATURES - XFER MODE command */
140 if ((srb->cmnd[12] == ATA_CMD_SET_FEATURES)
141 && (srb->cmnd[6] == SETFEATURES_XFER))
142 goto invalid_fld;
143
144 if (srb->cmnd[12] == ATA_CMD_ID_ATA || srb->cmnd[12] == ATA_CMD_ID_ATAPI)
145 srb->cmnd[2] |= (1<<7); /* set IdentifyPacketDevice for these cmds */
146
147
148 usb_stor_transparent_scsi_command(srb, us);
149
150 /* if the device doesn't support ATACB */
151 if (srb->result == SAM_STAT_CHECK_CONDITION &&
152 memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB,
153 sizeof(usb_stor_sense_invalidCDB)) == 0) {
154 usb_stor_dbg(us, "cypress atacb not supported ???\n");
155 goto end;
156 }
157
158 /*
159 * if ck_cond flags is set, and there wasn't critical error,
160 * build the special sense
161 */
162 if ((srb->result != (DID_ERROR << 16) &&
163 srb->result != (DID_ABORT << 16)) &&
164 save_cmnd[2] & 0x20) {
165 struct scsi_eh_save ses;
166 unsigned char regs[8];
167 unsigned char *sb = srb->sense_buffer;
168 unsigned char *desc = sb + 8;
169 int tmp_result;
170
171 /* build the command for reading the ATA registers */
172 scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs));
173
174 /*
175 * we use the same command as before, but we set
176 * the read taskfile bit, for not executing atacb command,
177 * but reading register selected in srb->cmnd[4]
178 */
179 srb->cmd_len = 16;
180 srb->cmnd = ses.cmnd;
181 srb->cmnd[2] = 1;
182
183 usb_stor_transparent_scsi_command(srb, us);
184 memcpy(regs, srb->sense_buffer, sizeof(regs));
185 tmp_result = srb->result;
186 scsi_eh_restore_cmnd(srb, &ses);
187 /* we fail to get registers, report invalid command */
188 if (tmp_result != SAM_STAT_GOOD)
189 goto invalid_fld;
190
191 /* build the sense */
192 memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
193
194 /* set sk, asc for a good command */
195 sb[1] = RECOVERED_ERROR;
196 sb[2] = 0; /* ATA PASS THROUGH INFORMATION AVAILABLE */
197 sb[3] = 0x1D;
198
199 /*
200 * XXX we should generate sk, asc, ascq from status and error
201 * regs
202 * (see 11.1 Error translation ATA device error to SCSI error
203 * map, and ata_to_sense_error from libata.)
204 */
205
206 /* Sense data is current and format is descriptor. */
207 sb[0] = 0x72;
208 desc[0] = 0x09; /* ATA_RETURN_DESCRIPTOR */
209
210 /* set length of additional sense data */
211 sb[7] = 14;
212 desc[1] = 12;
213
214 /* Copy registers into sense buffer. */
215 desc[ 2] = 0x00;
216 desc[ 3] = regs[1]; /* features */
217 desc[ 5] = regs[2]; /* sector count */
218 desc[ 7] = regs[3]; /* lba low */
219 desc[ 9] = regs[4]; /* lba med */
220 desc[11] = regs[5]; /* lba high */
221 desc[12] = regs[6]; /* device */
222 desc[13] = regs[7]; /* command */
223
224 srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
225 }
226 goto end;
227invalid_fld:
228 srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
229
230 memcpy(srb->sense_buffer,
231 usb_stor_sense_invalidCDB,
232 sizeof(usb_stor_sense_invalidCDB));
233end:
234 memcpy(srb->cmnd, save_cmnd, sizeof(save_cmnd));
235 if (srb->cmnd[0] == ATA_12)
236 srb->cmd_len = 12;
237}
238
239static struct scsi_host_template cypress_host_template;
240
241static int cypress_probe(struct usb_interface *intf,
242 const struct usb_device_id *id)
243{
244 struct us_data *us;
245 int result;
246 struct usb_device *device;
247
248 result = usb_stor_probe1(&us, intf, id,
249 (id - cypress_usb_ids) + cypress_unusual_dev_list,
250 &cypress_host_template);
251 if (result)
252 return result;
253
254 /*
255 * Among CY7C68300 chips, the A revision does not support Cypress ATACB
256 * Filter out this revision from EEPROM default descriptor values
257 */
258 device = interface_to_usbdev(intf);
259 if (device->descriptor.iManufacturer != 0x38 ||
260 device->descriptor.iProduct != 0x4e ||
261 device->descriptor.iSerialNumber != 0x64) {
262 us->protocol_name = "Transparent SCSI with Cypress ATACB";
263 us->proto_handler = cypress_atacb_passthrough;
264 } else {
265 us->protocol_name = "Transparent SCSI";
266 us->proto_handler = usb_stor_transparent_scsi_command;
267 }
268
269 result = usb_stor_probe2(us);
270 return result;
271}
272
273static struct usb_driver cypress_driver = {
274 .name = DRV_NAME,
275 .probe = cypress_probe,
276 .disconnect = usb_stor_disconnect,
277 .suspend = usb_stor_suspend,
278 .resume = usb_stor_resume,
279 .reset_resume = usb_stor_reset_resume,
280 .pre_reset = usb_stor_pre_reset,
281 .post_reset = usb_stor_post_reset,
282 .id_table = cypress_usb_ids,
283 .soft_unbind = 1,
284 .no_dynamic_id = 1,
285};
286
287module_usb_stor_driver(cypress_driver, cypress_host_template, DRV_NAME);
1/*
2 * Support for emulating SAT (ata pass through) on devices based
3 * on the Cypress USB/ATA bridge supporting ATACB.
4 *
5 * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr)
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2, or (at your option) any
10 * later version.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, write to the Free Software Foundation, Inc.,
19 * 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
21
22#include <linux/module.h>
23#include <scsi/scsi.h>
24#include <scsi/scsi_cmnd.h>
25#include <scsi/scsi_eh.h>
26#include <linux/ata.h>
27
28#include "usb.h"
29#include "protocol.h"
30#include "scsiglue.h"
31#include "debug.h"
32
33#define DRV_NAME "ums-cypress"
34
35MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB");
36MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>");
37MODULE_LICENSE("GPL");
38
39/*
40 * The table of devices
41 */
42#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
43 vendorName, productName, useProtocol, useTransport, \
44 initFunction, flags) \
45{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
46 .driver_info = (flags) }
47
48static struct usb_device_id cypress_usb_ids[] = {
49# include "unusual_cypress.h"
50 { } /* Terminating entry */
51};
52MODULE_DEVICE_TABLE(usb, cypress_usb_ids);
53
54#undef UNUSUAL_DEV
55
56/*
57 * The flags table
58 */
59#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
60 vendor_name, product_name, use_protocol, use_transport, \
61 init_function, Flags) \
62{ \
63 .vendorName = vendor_name, \
64 .productName = product_name, \
65 .useProtocol = use_protocol, \
66 .useTransport = use_transport, \
67 .initFunction = init_function, \
68}
69
70static struct us_unusual_dev cypress_unusual_dev_list[] = {
71# include "unusual_cypress.h"
72 { } /* Terminating entry */
73};
74
75#undef UNUSUAL_DEV
76
77
78/*
79 * ATACB is a protocol used on cypress usb<->ata bridge to
80 * send raw ATA command over mass storage
81 * There is a ATACB2 protocol that support LBA48 on newer chip.
82 * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf
83 * datasheet from cypress.com.
84 */
85static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
86{
87 unsigned char save_cmnd[MAX_COMMAND_SIZE];
88
89 if (likely(srb->cmnd[0] != ATA_16 && srb->cmnd[0] != ATA_12)) {
90 usb_stor_transparent_scsi_command(srb, us);
91 return;
92 }
93
94 memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd));
95 memset(srb->cmnd, 0, MAX_COMMAND_SIZE);
96
97 /* check if we support the command */
98 if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */
99 goto invalid_fld;
100 /* check protocol */
101 switch ((save_cmnd[1] >> 1) & 0xf) {
102 case 3: /*no DATA */
103 case 4: /* PIO in */
104 case 5: /* PIO out */
105 break;
106 default:
107 goto invalid_fld;
108 }
109
110 /* first build the ATACB command */
111 srb->cmd_len = 16;
112
113 srb->cmnd[0] = 0x24; /*
114 * bVSCBSignature : vendor-specific command
115 * this value can change, but most(all ?) manufacturers
116 * keep the cypress default : 0x24
117 */
118 srb->cmnd[1] = 0x24; /* bVSCBSubCommand : 0x24 for ATACB */
119
120 srb->cmnd[3] = 0xff - 1; /*
121 * features, sector count, lba low, lba med
122 * lba high, device, command are valid
123 */
124 srb->cmnd[4] = 1; /* TransferBlockCount : 512 */
125
126 if (save_cmnd[0] == ATA_16) {
127 srb->cmnd[ 6] = save_cmnd[ 4]; /* features */
128 srb->cmnd[ 7] = save_cmnd[ 6]; /* sector count */
129 srb->cmnd[ 8] = save_cmnd[ 8]; /* lba low */
130 srb->cmnd[ 9] = save_cmnd[10]; /* lba med */
131 srb->cmnd[10] = save_cmnd[12]; /* lba high */
132 srb->cmnd[11] = save_cmnd[13]; /* device */
133 srb->cmnd[12] = save_cmnd[14]; /* command */
134
135 if (save_cmnd[1] & 0x01) {/* extended bit set for LBA48 */
136 /* this could be supported by atacb2 */
137 if (save_cmnd[3] || save_cmnd[5] || save_cmnd[7] || save_cmnd[9]
138 || save_cmnd[11])
139 goto invalid_fld;
140 }
141 } else { /* ATA12 */
142 srb->cmnd[ 6] = save_cmnd[3]; /* features */
143 srb->cmnd[ 7] = save_cmnd[4]; /* sector count */
144 srb->cmnd[ 8] = save_cmnd[5]; /* lba low */
145 srb->cmnd[ 9] = save_cmnd[6]; /* lba med */
146 srb->cmnd[10] = save_cmnd[7]; /* lba high */
147 srb->cmnd[11] = save_cmnd[8]; /* device */
148 srb->cmnd[12] = save_cmnd[9]; /* command */
149
150 }
151 /* Filter SET_FEATURES - XFER MODE command */
152 if ((srb->cmnd[12] == ATA_CMD_SET_FEATURES)
153 && (srb->cmnd[6] == SETFEATURES_XFER))
154 goto invalid_fld;
155
156 if (srb->cmnd[12] == ATA_CMD_ID_ATA || srb->cmnd[12] == ATA_CMD_ID_ATAPI)
157 srb->cmnd[2] |= (1<<7); /* set IdentifyPacketDevice for these cmds */
158
159
160 usb_stor_transparent_scsi_command(srb, us);
161
162 /* if the device doesn't support ATACB */
163 if (srb->result == SAM_STAT_CHECK_CONDITION &&
164 memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB,
165 sizeof(usb_stor_sense_invalidCDB)) == 0) {
166 usb_stor_dbg(us, "cypress atacb not supported ???\n");
167 goto end;
168 }
169
170 /*
171 * if ck_cond flags is set, and there wasn't critical error,
172 * build the special sense
173 */
174 if ((srb->result != (DID_ERROR << 16) &&
175 srb->result != (DID_ABORT << 16)) &&
176 save_cmnd[2] & 0x20) {
177 struct scsi_eh_save ses;
178 unsigned char regs[8];
179 unsigned char *sb = srb->sense_buffer;
180 unsigned char *desc = sb + 8;
181 int tmp_result;
182
183 /* build the command for reading the ATA registers */
184 scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs));
185
186 /*
187 * we use the same command as before, but we set
188 * the read taskfile bit, for not executing atacb command,
189 * but reading register selected in srb->cmnd[4]
190 */
191 srb->cmd_len = 16;
192 srb->cmnd = ses.cmnd;
193 srb->cmnd[2] = 1;
194
195 usb_stor_transparent_scsi_command(srb, us);
196 memcpy(regs, srb->sense_buffer, sizeof(regs));
197 tmp_result = srb->result;
198 scsi_eh_restore_cmnd(srb, &ses);
199 /* we fail to get registers, report invalid command */
200 if (tmp_result != SAM_STAT_GOOD)
201 goto invalid_fld;
202
203 /* build the sense */
204 memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
205
206 /* set sk, asc for a good command */
207 sb[1] = RECOVERED_ERROR;
208 sb[2] = 0; /* ATA PASS THROUGH INFORMATION AVAILABLE */
209 sb[3] = 0x1D;
210
211 /*
212 * XXX we should generate sk, asc, ascq from status and error
213 * regs
214 * (see 11.1 Error translation ATA device error to SCSI error
215 * map, and ata_to_sense_error from libata.)
216 */
217
218 /* Sense data is current and format is descriptor. */
219 sb[0] = 0x72;
220 desc[0] = 0x09; /* ATA_RETURN_DESCRIPTOR */
221
222 /* set length of additional sense data */
223 sb[7] = 14;
224 desc[1] = 12;
225
226 /* Copy registers into sense buffer. */
227 desc[ 2] = 0x00;
228 desc[ 3] = regs[1]; /* features */
229 desc[ 5] = regs[2]; /* sector count */
230 desc[ 7] = regs[3]; /* lba low */
231 desc[ 9] = regs[4]; /* lba med */
232 desc[11] = regs[5]; /* lba high */
233 desc[12] = regs[6]; /* device */
234 desc[13] = regs[7]; /* command */
235
236 srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
237 }
238 goto end;
239invalid_fld:
240 srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
241
242 memcpy(srb->sense_buffer,
243 usb_stor_sense_invalidCDB,
244 sizeof(usb_stor_sense_invalidCDB));
245end:
246 memcpy(srb->cmnd, save_cmnd, sizeof(save_cmnd));
247 if (srb->cmnd[0] == ATA_12)
248 srb->cmd_len = 12;
249}
250
251static struct scsi_host_template cypress_host_template;
252
253static int cypress_probe(struct usb_interface *intf,
254 const struct usb_device_id *id)
255{
256 struct us_data *us;
257 int result;
258 struct usb_device *device;
259
260 result = usb_stor_probe1(&us, intf, id,
261 (id - cypress_usb_ids) + cypress_unusual_dev_list,
262 &cypress_host_template);
263 if (result)
264 return result;
265
266 /*
267 * Among CY7C68300 chips, the A revision does not support Cypress ATACB
268 * Filter out this revision from EEPROM default descriptor values
269 */
270 device = interface_to_usbdev(intf);
271 if (device->descriptor.iManufacturer != 0x38 ||
272 device->descriptor.iProduct != 0x4e ||
273 device->descriptor.iSerialNumber != 0x64) {
274 us->protocol_name = "Transparent SCSI with Cypress ATACB";
275 us->proto_handler = cypress_atacb_passthrough;
276 } else {
277 us->protocol_name = "Transparent SCSI";
278 us->proto_handler = usb_stor_transparent_scsi_command;
279 }
280
281 result = usb_stor_probe2(us);
282 return result;
283}
284
285static struct usb_driver cypress_driver = {
286 .name = DRV_NAME,
287 .probe = cypress_probe,
288 .disconnect = usb_stor_disconnect,
289 .suspend = usb_stor_suspend,
290 .resume = usb_stor_resume,
291 .reset_resume = usb_stor_reset_resume,
292 .pre_reset = usb_stor_pre_reset,
293 .post_reset = usb_stor_post_reset,
294 .id_table = cypress_usb_ids,
295 .soft_unbind = 1,
296 .no_dynamic_id = 1,
297};
298
299module_usb_stor_driver(cypress_driver, cypress_host_template, DRV_NAME);