Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * OpenRISC setup.c
4 *
5 * Linux architectural port borrowing liberally from similar works of
6 * others. All original copyrights apply as per the original source
7 * declaration.
8 *
9 * Modifications for the OpenRISC architecture:
10 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
11 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
12 *
13 * This file handles the architecture-dependent parts of initialization
14 */
15
16#include <linux/errno.h>
17#include <linux/sched.h>
18#include <linux/kernel.h>
19#include <linux/mm.h>
20#include <linux/stddef.h>
21#include <linux/unistd.h>
22#include <linux/ptrace.h>
23#include <linux/slab.h>
24#include <linux/tty.h>
25#include <linux/ioport.h>
26#include <linux/delay.h>
27#include <linux/console.h>
28#include <linux/init.h>
29#include <linux/memblock.h>
30#include <linux/seq_file.h>
31#include <linux/serial.h>
32#include <linux/initrd.h>
33#include <linux/of_fdt.h>
34#include <linux/of.h>
35#include <linux/device.h>
36
37#include <asm/sections.h>
38#include <asm/types.h>
39#include <asm/setup.h>
40#include <asm/io.h>
41#include <asm/cpuinfo.h>
42#include <asm/delay.h>
43
44#include "vmlinux.h"
45
46static void __init setup_memory(void)
47{
48 unsigned long ram_start_pfn;
49 unsigned long ram_end_pfn;
50 phys_addr_t memory_start, memory_end;
51 struct memblock_region *region;
52
53 memory_end = memory_start = 0;
54
55 /* Find main memory where is the kernel, we assume its the only one */
56 for_each_memblock(memory, region) {
57 memory_start = region->base;
58 memory_end = region->base + region->size;
59 printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
60 memory_start, memory_end);
61 }
62
63 if (!memory_end) {
64 panic("No memory!");
65 }
66
67 ram_start_pfn = PFN_UP(memory_start);
68 ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
69
70 /* setup bootmem globals (we use no_bootmem, but mm still depends on this) */
71 min_low_pfn = ram_start_pfn;
72 max_low_pfn = ram_end_pfn;
73 max_pfn = ram_end_pfn;
74
75 /*
76 * initialize the boot-time allocator (with low memory only).
77 *
78 * This makes the memory from the end of the kernel to the end of
79 * RAM usable.
80 */
81 memblock_reserve(__pa(_stext), _end - _stext);
82
83#ifdef CONFIG_BLK_DEV_INITRD
84 /* Then reserve the initrd, if any */
85 if (initrd_start && (initrd_end > initrd_start)) {
86 unsigned long aligned_start = ALIGN_DOWN(initrd_start, PAGE_SIZE);
87 unsigned long aligned_end = ALIGN(initrd_end, PAGE_SIZE);
88
89 memblock_reserve(__pa(aligned_start), aligned_end - aligned_start);
90 }
91#endif /* CONFIG_BLK_DEV_INITRD */
92
93 early_init_fdt_reserve_self();
94 early_init_fdt_scan_reserved_mem();
95
96 memblock_dump_all();
97}
98
99struct cpuinfo_or1k cpuinfo_or1k[NR_CPUS];
100
101static void print_cpuinfo(void)
102{
103 unsigned long upr = mfspr(SPR_UPR);
104 unsigned long vr = mfspr(SPR_VR);
105 unsigned int version;
106 unsigned int revision;
107 struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
108
109 version = (vr & SPR_VR_VER) >> 24;
110 revision = (vr & SPR_VR_REV);
111
112 printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
113 version, revision, cpuinfo->clock_frequency / 1000000);
114
115 if (!(upr & SPR_UPR_UP)) {
116 printk(KERN_INFO
117 "-- no UPR register... unable to detect configuration\n");
118 return;
119 }
120
121 if (upr & SPR_UPR_DCP)
122 printk(KERN_INFO
123 "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
124 cpuinfo->dcache_size, cpuinfo->dcache_block_size,
125 cpuinfo->dcache_ways);
126 else
127 printk(KERN_INFO "-- dcache disabled\n");
128 if (upr & SPR_UPR_ICP)
129 printk(KERN_INFO
130 "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
131 cpuinfo->icache_size, cpuinfo->icache_block_size,
132 cpuinfo->icache_ways);
133 else
134 printk(KERN_INFO "-- icache disabled\n");
135
136 if (upr & SPR_UPR_DMP)
137 printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
138 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
139 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
140 if (upr & SPR_UPR_IMP)
141 printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
142 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
143 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
144
145 printk(KERN_INFO "-- additional features:\n");
146 if (upr & SPR_UPR_DUP)
147 printk(KERN_INFO "-- debug unit\n");
148 if (upr & SPR_UPR_PCUP)
149 printk(KERN_INFO "-- performance counters\n");
150 if (upr & SPR_UPR_PMP)
151 printk(KERN_INFO "-- power management\n");
152 if (upr & SPR_UPR_PICP)
153 printk(KERN_INFO "-- PIC\n");
154 if (upr & SPR_UPR_TTP)
155 printk(KERN_INFO "-- timer\n");
156 if (upr & SPR_UPR_CUP)
157 printk(KERN_INFO "-- custom unit(s)\n");
158}
159
160static struct device_node *setup_find_cpu_node(int cpu)
161{
162 u32 hwid;
163 struct device_node *cpun;
164
165 for_each_of_cpu_node(cpun) {
166 if (of_property_read_u32(cpun, "reg", &hwid))
167 continue;
168 if (hwid == cpu)
169 return cpun;
170 }
171
172 return NULL;
173}
174
175void __init setup_cpuinfo(void)
176{
177 struct device_node *cpu;
178 unsigned long iccfgr, dccfgr;
179 unsigned long cache_set_size;
180 int cpu_id = smp_processor_id();
181 struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[cpu_id];
182
183 cpu = setup_find_cpu_node(cpu_id);
184 if (!cpu)
185 panic("Couldn't find CPU%d in device tree...\n", cpu_id);
186
187 iccfgr = mfspr(SPR_ICCFGR);
188 cpuinfo->icache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
189 cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
190 cpuinfo->icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
191 cpuinfo->icache_size =
192 cache_set_size * cpuinfo->icache_ways * cpuinfo->icache_block_size;
193
194 dccfgr = mfspr(SPR_DCCFGR);
195 cpuinfo->dcache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
196 cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
197 cpuinfo->dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
198 cpuinfo->dcache_size =
199 cache_set_size * cpuinfo->dcache_ways * cpuinfo->dcache_block_size;
200
201 if (of_property_read_u32(cpu, "clock-frequency",
202 &cpuinfo->clock_frequency)) {
203 printk(KERN_WARNING
204 "Device tree missing CPU 'clock-frequency' parameter."
205 "Assuming frequency 25MHZ"
206 "This is probably not what you want.");
207 }
208
209 cpuinfo->coreid = mfspr(SPR_COREID);
210
211 of_node_put(cpu);
212
213 print_cpuinfo();
214}
215
216/**
217 * or32_early_setup
218 *
219 * Handles the pointer to the device tree that this kernel is to use
220 * for establishing the available platform devices.
221 *
222 * Falls back on built-in device tree in case null pointer is passed.
223 */
224
225void __init or32_early_setup(void *fdt)
226{
227 if (fdt)
228 pr_info("FDT at %p\n", fdt);
229 else {
230 fdt = __dtb_start;
231 pr_info("Compiled-in FDT at %p\n", fdt);
232 }
233 early_init_devtree(fdt);
234}
235
236static inline unsigned long extract_value_bits(unsigned long reg,
237 short bit_nr, short width)
238{
239 return (reg >> bit_nr) & (0 << width);
240}
241
242static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
243{
244 while (!(mask & 0x1)) {
245 reg = reg >> 1;
246 mask = mask >> 1;
247 }
248 return mask & reg;
249}
250
251void __init detect_unit_config(unsigned long upr, unsigned long mask,
252 char *text, void (*func) (void))
253{
254 if (text != NULL)
255 printk("%s", text);
256
257 if (upr & mask) {
258 if (func != NULL)
259 func();
260 else
261 printk("present\n");
262 } else
263 printk("not present\n");
264}
265
266/*
267 * calibrate_delay
268 *
269 * Lightweight calibrate_delay implementation that calculates loops_per_jiffy
270 * from the clock frequency passed in via the device tree
271 *
272 */
273
274void calibrate_delay(void)
275{
276 const int *val;
277 struct device_node *cpu = setup_find_cpu_node(smp_processor_id());
278
279 val = of_get_property(cpu, "clock-frequency", NULL);
280 if (!val)
281 panic("no cpu 'clock-frequency' parameter in device tree");
282 loops_per_jiffy = *val / HZ;
283 pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
284 loops_per_jiffy / (500000 / HZ),
285 (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
286}
287
288void __init setup_arch(char **cmdline_p)
289{
290 unflatten_and_copy_device_tree();
291
292 setup_cpuinfo();
293
294#ifdef CONFIG_SMP
295 smp_init_cpus();
296#endif
297
298 /* process 1's initial memory region is the kernel code/data */
299 init_mm.start_code = (unsigned long)_stext;
300 init_mm.end_code = (unsigned long)_etext;
301 init_mm.end_data = (unsigned long)_edata;
302 init_mm.brk = (unsigned long)_end;
303
304#ifdef CONFIG_BLK_DEV_INITRD
305 if (initrd_start == initrd_end) {
306 printk(KERN_INFO "Initial ramdisk not found\n");
307 initrd_start = 0;
308 initrd_end = 0;
309 } else {
310 printk(KERN_INFO "Initial ramdisk at: 0x%p (%lu bytes)\n",
311 (void *)(initrd_start), initrd_end - initrd_start);
312 initrd_below_start_ok = 1;
313 }
314#endif
315
316 /* setup memblock allocator */
317 setup_memory();
318
319 /* paging_init() sets up the MMU and marks all pages as reserved */
320 paging_init();
321
322 *cmdline_p = boot_command_line;
323
324 printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n");
325}
326
327static int show_cpuinfo(struct seq_file *m, void *v)
328{
329 unsigned int vr, cpucfgr;
330 unsigned int avr;
331 unsigned int version;
332 struct cpuinfo_or1k *cpuinfo = v;
333
334 vr = mfspr(SPR_VR);
335 cpucfgr = mfspr(SPR_CPUCFGR);
336
337#ifdef CONFIG_SMP
338 seq_printf(m, "processor\t\t: %d\n", cpuinfo->coreid);
339#endif
340 if (vr & SPR_VR_UVRP) {
341 vr = mfspr(SPR_VR2);
342 version = vr & SPR_VR2_VER;
343 avr = mfspr(SPR_AVR);
344 seq_printf(m, "cpu architecture\t: "
345 "OpenRISC 1000 (%d.%d-rev%d)\n",
346 (avr >> 24) & 0xff,
347 (avr >> 16) & 0xff,
348 (avr >> 8) & 0xff);
349 seq_printf(m, "cpu implementation id\t: 0x%x\n",
350 (vr & SPR_VR2_CPUID) >> 24);
351 seq_printf(m, "cpu version\t\t: 0x%x\n", version);
352 } else {
353 version = (vr & SPR_VR_VER) >> 24;
354 seq_printf(m, "cpu\t\t\t: OpenRISC-%x\n", version);
355 seq_printf(m, "revision\t\t: %d\n", vr & SPR_VR_REV);
356 }
357 seq_printf(m, "frequency\t\t: %ld\n", loops_per_jiffy * HZ);
358 seq_printf(m, "dcache size\t\t: %d bytes\n", cpuinfo->dcache_size);
359 seq_printf(m, "dcache block size\t: %d bytes\n",
360 cpuinfo->dcache_block_size);
361 seq_printf(m, "dcache ways\t\t: %d\n", cpuinfo->dcache_ways);
362 seq_printf(m, "icache size\t\t: %d bytes\n", cpuinfo->icache_size);
363 seq_printf(m, "icache block size\t: %d bytes\n",
364 cpuinfo->icache_block_size);
365 seq_printf(m, "icache ways\t\t: %d\n", cpuinfo->icache_ways);
366 seq_printf(m, "immu\t\t\t: %d entries, %lu ways\n",
367 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
368 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
369 seq_printf(m, "dmmu\t\t\t: %d entries, %lu ways\n",
370 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
371 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
372 seq_printf(m, "bogomips\t\t: %lu.%02lu\n",
373 (loops_per_jiffy * HZ) / 500000,
374 ((loops_per_jiffy * HZ) / 5000) % 100);
375
376 seq_puts(m, "features\t\t: ");
377 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB32S ? "orbis32" : "");
378 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB64S ? "orbis64" : "");
379 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF32S ? "orfpx32" : "");
380 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF64S ? "orfpx64" : "");
381 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OV64S ? "orvdx64" : "");
382 seq_puts(m, "\n");
383
384 seq_puts(m, "\n");
385
386 return 0;
387}
388
389static void *c_start(struct seq_file *m, loff_t *pos)
390{
391 *pos = cpumask_next(*pos - 1, cpu_online_mask);
392 if ((*pos) < nr_cpu_ids)
393 return &cpuinfo_or1k[*pos];
394 return NULL;
395}
396
397static void *c_next(struct seq_file *m, void *v, loff_t *pos)
398{
399 (*pos)++;
400 return c_start(m, pos);
401}
402
403static void c_stop(struct seq_file *m, void *v)
404{
405}
406
407const struct seq_operations cpuinfo_op = {
408 .start = c_start,
409 .next = c_next,
410 .stop = c_stop,
411 .show = show_cpuinfo,
412};
1/*
2 * OpenRISC setup.c
3 *
4 * Linux architectural port borrowing liberally from similar works of
5 * others. All original copyrights apply as per the original source
6 * declaration.
7 *
8 * Modifications for the OpenRISC architecture:
9 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
10 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version
15 * 2 of the License, or (at your option) any later version.
16 *
17 * This file handles the architecture-dependent parts of initialization
18 */
19
20#include <linux/errno.h>
21#include <linux/sched.h>
22#include <linux/kernel.h>
23#include <linux/mm.h>
24#include <linux/stddef.h>
25#include <linux/unistd.h>
26#include <linux/ptrace.h>
27#include <linux/slab.h>
28#include <linux/tty.h>
29#include <linux/ioport.h>
30#include <linux/delay.h>
31#include <linux/console.h>
32#include <linux/init.h>
33#include <linux/bootmem.h>
34#include <linux/seq_file.h>
35#include <linux/serial.h>
36#include <linux/initrd.h>
37#include <linux/of_fdt.h>
38#include <linux/of.h>
39#include <linux/memblock.h>
40#include <linux/device.h>
41
42#include <asm/sections.h>
43#include <asm/segment.h>
44#include <asm/pgtable.h>
45#include <asm/types.h>
46#include <asm/setup.h>
47#include <asm/io.h>
48#include <asm/cpuinfo.h>
49#include <asm/delay.h>
50
51#include "vmlinux.h"
52
53static void __init setup_memory(void)
54{
55 unsigned long ram_start_pfn;
56 unsigned long ram_end_pfn;
57 phys_addr_t memory_start, memory_end;
58 struct memblock_region *region;
59
60 memory_end = memory_start = 0;
61
62 /* Find main memory where is the kernel, we assume its the only one */
63 for_each_memblock(memory, region) {
64 memory_start = region->base;
65 memory_end = region->base + region->size;
66 printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
67 memory_start, memory_end);
68 }
69
70 if (!memory_end) {
71 panic("No memory!");
72 }
73
74 ram_start_pfn = PFN_UP(memory_start);
75 ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
76
77 /* setup bootmem globals (we use no_bootmem, but mm still depends on this) */
78 min_low_pfn = ram_start_pfn;
79 max_low_pfn = ram_end_pfn;
80 max_pfn = ram_end_pfn;
81
82 /*
83 * initialize the boot-time allocator (with low memory only).
84 *
85 * This makes the memory from the end of the kernel to the end of
86 * RAM usable.
87 */
88 memblock_reserve(__pa(_stext), _end - _stext);
89
90 early_init_fdt_reserve_self();
91 early_init_fdt_scan_reserved_mem();
92
93 memblock_dump_all();
94}
95
96struct cpuinfo cpuinfo;
97
98static void print_cpuinfo(void)
99{
100 unsigned long upr = mfspr(SPR_UPR);
101 unsigned long vr = mfspr(SPR_VR);
102 unsigned int version;
103 unsigned int revision;
104
105 version = (vr & SPR_VR_VER) >> 24;
106 revision = (vr & SPR_VR_REV);
107
108 printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
109 version, revision, cpuinfo.clock_frequency / 1000000);
110
111 if (!(upr & SPR_UPR_UP)) {
112 printk(KERN_INFO
113 "-- no UPR register... unable to detect configuration\n");
114 return;
115 }
116
117 if (upr & SPR_UPR_DCP)
118 printk(KERN_INFO
119 "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
120 cpuinfo.dcache_size, cpuinfo.dcache_block_size, 1);
121 else
122 printk(KERN_INFO "-- dcache disabled\n");
123 if (upr & SPR_UPR_ICP)
124 printk(KERN_INFO
125 "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
126 cpuinfo.icache_size, cpuinfo.icache_block_size, 1);
127 else
128 printk(KERN_INFO "-- icache disabled\n");
129
130 if (upr & SPR_UPR_DMP)
131 printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
132 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
133 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
134 if (upr & SPR_UPR_IMP)
135 printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
136 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
137 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
138
139 printk(KERN_INFO "-- additional features:\n");
140 if (upr & SPR_UPR_DUP)
141 printk(KERN_INFO "-- debug unit\n");
142 if (upr & SPR_UPR_PCUP)
143 printk(KERN_INFO "-- performance counters\n");
144 if (upr & SPR_UPR_PMP)
145 printk(KERN_INFO "-- power management\n");
146 if (upr & SPR_UPR_PICP)
147 printk(KERN_INFO "-- PIC\n");
148 if (upr & SPR_UPR_TTP)
149 printk(KERN_INFO "-- timer\n");
150 if (upr & SPR_UPR_CUP)
151 printk(KERN_INFO "-- custom unit(s)\n");
152}
153
154void __init setup_cpuinfo(void)
155{
156 struct device_node *cpu;
157 unsigned long iccfgr, dccfgr;
158 unsigned long cache_set_size, cache_ways;
159
160 cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");
161 if (!cpu)
162 panic("No compatible CPU found in device tree...\n");
163
164 iccfgr = mfspr(SPR_ICCFGR);
165 cache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
166 cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
167 cpuinfo.icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
168 cpuinfo.icache_size =
169 cache_set_size * cache_ways * cpuinfo.icache_block_size;
170
171 dccfgr = mfspr(SPR_DCCFGR);
172 cache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
173 cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
174 cpuinfo.dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
175 cpuinfo.dcache_size =
176 cache_set_size * cache_ways * cpuinfo.dcache_block_size;
177
178 if (of_property_read_u32(cpu, "clock-frequency",
179 &cpuinfo.clock_frequency)) {
180 printk(KERN_WARNING
181 "Device tree missing CPU 'clock-frequency' parameter."
182 "Assuming frequency 25MHZ"
183 "This is probably not what you want.");
184 }
185
186 of_node_put(cpu);
187
188 print_cpuinfo();
189}
190
191/**
192 * or32_early_setup
193 *
194 * Handles the pointer to the device tree that this kernel is to use
195 * for establishing the available platform devices.
196 *
197 * Falls back on built-in device tree in case null pointer is passed.
198 */
199
200void __init or32_early_setup(void *fdt)
201{
202 if (fdt)
203 pr_info("FDT at %p\n", fdt);
204 else {
205 fdt = __dtb_start;
206 pr_info("Compiled-in FDT at %p\n", fdt);
207 }
208 early_init_devtree(fdt);
209}
210
211static inline unsigned long extract_value_bits(unsigned long reg,
212 short bit_nr, short width)
213{
214 return (reg >> bit_nr) & (0 << width);
215}
216
217static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
218{
219 while (!(mask & 0x1)) {
220 reg = reg >> 1;
221 mask = mask >> 1;
222 }
223 return mask & reg;
224}
225
226void __init detect_unit_config(unsigned long upr, unsigned long mask,
227 char *text, void (*func) (void))
228{
229 if (text != NULL)
230 printk("%s", text);
231
232 if (upr & mask) {
233 if (func != NULL)
234 func();
235 else
236 printk("present\n");
237 } else
238 printk("not present\n");
239}
240
241/*
242 * calibrate_delay
243 *
244 * Lightweight calibrate_delay implementation that calculates loops_per_jiffy
245 * from the clock frequency passed in via the device tree
246 *
247 */
248
249void calibrate_delay(void)
250{
251 const int *val;
252 struct device_node *cpu = NULL;
253 cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");
254 val = of_get_property(cpu, "clock-frequency", NULL);
255 if (!val)
256 panic("no cpu 'clock-frequency' parameter in device tree");
257 loops_per_jiffy = *val / HZ;
258 pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
259 loops_per_jiffy / (500000 / HZ),
260 (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
261}
262
263void __init setup_arch(char **cmdline_p)
264{
265 unflatten_and_copy_device_tree();
266
267 setup_cpuinfo();
268
269 /* process 1's initial memory region is the kernel code/data */
270 init_mm.start_code = (unsigned long)_stext;
271 init_mm.end_code = (unsigned long)_etext;
272 init_mm.end_data = (unsigned long)_edata;
273 init_mm.brk = (unsigned long)_end;
274
275#ifdef CONFIG_BLK_DEV_INITRD
276 initrd_start = (unsigned long)&__initrd_start;
277 initrd_end = (unsigned long)&__initrd_end;
278 if (initrd_start == initrd_end) {
279 initrd_start = 0;
280 initrd_end = 0;
281 }
282 initrd_below_start_ok = 1;
283#endif
284
285 /* setup memblock allocator */
286 setup_memory();
287
288 /* paging_init() sets up the MMU and marks all pages as reserved */
289 paging_init();
290
291#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
292 if (!conswitchp)
293 conswitchp = &dummy_con;
294#endif
295
296 *cmdline_p = boot_command_line;
297
298 printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n");
299}
300
301static int show_cpuinfo(struct seq_file *m, void *v)
302{
303 unsigned long vr;
304 int version, revision;
305
306 vr = mfspr(SPR_VR);
307 version = (vr & SPR_VR_VER) >> 24;
308 revision = vr & SPR_VR_REV;
309
310 seq_printf(m,
311 "cpu\t\t: OpenRISC-%x\n"
312 "revision\t: %d\n"
313 "frequency\t: %ld\n"
314 "dcache size\t: %d bytes\n"
315 "dcache block size\t: %d bytes\n"
316 "icache size\t: %d bytes\n"
317 "icache block size\t: %d bytes\n"
318 "immu\t\t: %d entries, %lu ways\n"
319 "dmmu\t\t: %d entries, %lu ways\n"
320 "bogomips\t: %lu.%02lu\n",
321 version,
322 revision,
323 loops_per_jiffy * HZ,
324 cpuinfo.dcache_size,
325 cpuinfo.dcache_block_size,
326 cpuinfo.icache_size,
327 cpuinfo.icache_block_size,
328 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
329 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW),
330 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
331 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW),
332 (loops_per_jiffy * HZ) / 500000,
333 ((loops_per_jiffy * HZ) / 5000) % 100);
334
335 return 0;
336}
337
338static void *c_start(struct seq_file *m, loff_t * pos)
339{
340 /* We only have one CPU... */
341 return *pos < 1 ? (void *)1 : NULL;
342}
343
344static void *c_next(struct seq_file *m, void *v, loff_t * pos)
345{
346 ++*pos;
347 return NULL;
348}
349
350static void c_stop(struct seq_file *m, void *v)
351{
352}
353
354const struct seq_operations cpuinfo_op = {
355 .start = c_start,
356 .next = c_next,
357 .stop = c_stop,
358 .show = show_cpuinfo,
359};