1# SPDX-License-Identifier: GPL-2.0
  2if MMU
  3
  4config ARCH_MAY_HAVE_PC_FDC
  5	bool
  6	depends on BROKEN && (Q40 || SUN3X)
  7	default y
  8
  9menu "Platform devices"
 10
 11config HEARTBEAT
 12	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
 13	default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
 14	help
 15	  Use the power-on LED on your machine as a load meter.  The exact
 16	  behavior is platform-dependent, but normally the flash frequency is
 17	  a hyperbolic function of the 5-minute load average.
 18
 19# We have a dedicated heartbeat LED. :-)
 20config PROC_HARDWARE
 21	bool "/proc/hardware support"
 22	help
 23	  Say Y here to support the /proc/hardware file, which gives you
 24	  access to information about the machine you're running on,
 25	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
 26	  and memory size.
 27
 28config NATFEAT
 29	bool "ARAnyM emulator support"
 30	depends on ATARI
 31	help
 32	  This option enables support for ARAnyM native features, such as
 33	  access to a disk image as /dev/hda.
 34
 35config NFBLOCK
 36	tristate "NatFeat block device support"
 37	depends on BLOCK && NATFEAT
 38	help
 39	  Say Y to include support for the ARAnyM NatFeat block device
 40	  which allows direct access to the hard drives without using
 41	  the hardware emulation.
 42
 43config NFCON
 44	tristate "NatFeat console driver"
 45	depends on TTY && NATFEAT
 46	help
 47	  Say Y to include support for the ARAnyM NatFeat console driver
 48	  which allows the console output to be redirected to the stderr
 49	  output of ARAnyM.
 50
 51config NFETH
 52	tristate "NatFeat Ethernet support"
 53	depends on ETHERNET && NATFEAT
 54	help
 55	  Say Y to include support for the ARAnyM NatFeat network device
 56	  which will emulate a regular ethernet device while presenting an
 57	  ethertap device to the host system.
 58
 59config ATARI_ETHERNAT
 60	bool "Atari EtherNAT Ethernet support"
 61	depends on ATARI
 62	help
 63	  Say Y to include support for the EtherNAT network adapter for the
 64	  CT/60 extension port.
 65
 66	  To compile the actual ethernet driver, choose Y or M for the SMC91X
 67	  option in the network device section; the module will be called smc91x.
 68
 69config ATARI_ETHERNEC
 70	bool "Atari EtherNEC Ethernet support"
 71	depends on ATARI_ROM_ISA
 72	help
 73	  Say Y to include support for the EtherNEC network adapter for the
 74	  ROM port. The driver works by polling instead of interrupts, so it
 75	  is quite slow.
 76
 77	  This driver also supports the ethernet part of the NetUSBee ROM
 78	  port combined Ethernet/USB adapter.
 79
 80	  To compile the actual ethernet driver, choose Y or M in for the NE2000
 81	  option in the network device section; the module will be called ne.
 82
 83endmenu
 84
 85menu "Character devices"
 86
 87config ATARI_DSP56K
 88	tristate "Atari DSP56k support"
 89	depends on ATARI
 90	help
 91	  If you want to be able to use the DSP56001 in Falcons, say Y. This
 92	  driver is still experimental, and if you don't know what it is, or
 93	  if you don't have this processor, just say N.
 94
 95	  To compile this driver as a module, choose M here.
 96
 97config AMIGA_BUILTIN_SERIAL
 98	tristate "Amiga builtin serial support"
 99	depends on AMIGA && TTY
100	help
101	  If you want to use your Amiga's built-in serial port in Linux,
102	  answer Y.
103
104	  To compile this driver as a module, choose M here.
105
106config HPDCA
107	tristate "HP DCA serial support"
108	depends on DIO && SERIAL_8250
109	help
110	  If you want to use the internal "DCA" serial ports on an HP300
111	  machine, say Y here.
112
113config HPAPCI
114	tristate "HP APCI serial support"
115	depends on HP300 && SERIAL_8250
116	help
117	  If you want to use the internal "APCI" serial ports on an HP400
118	  machine, say Y here.
119
120config SERIAL_CONSOLE
121	bool "Support for serial port console"
122	depends on AMIGA_BUILTIN_SERIAL=y
123	help
124	  If you say Y here, it will be possible to use a serial port as the
125	  system console (the system console is the device which receives all
126	  kernel messages and warnings and which allows logins in single user
127	  mode). This could be useful if some terminal or printer is connected
128	  to that serial port.
129
130	  Even if you say Y here, the currently visible virtual console
131	  (/dev/tty0) will still be used as the system console by default, but
132	  you can alter that using a kernel command line option such as
133	  "console=ttyS1". (Try "man bootparam" or see the documentation of
134	  your boot loader about how to pass options to the kernel at boot
135	  time.)
136
137	  If you don't have a graphical console and you say Y here, the
138	  kernel will automatically use the first serial line, /dev/ttyS0, as
139	  system console.
140
141	  If unsure, say N.
142
143endmenu
144
145endif

 
  1if MMU
  2
  3config ARCH_MAY_HAVE_PC_FDC
  4	bool
  5	depends on BROKEN && (Q40 || SUN3X)
  6	default y
  7
  8menu "Platform devices"
  9
 10config HEARTBEAT
 11	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
 12	default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
 13	help
 14	  Use the power-on LED on your machine as a load meter.  The exact
 15	  behavior is platform-dependent, but normally the flash frequency is
 16	  a hyperbolic function of the 5-minute load average.
 17
 18# We have a dedicated heartbeat LED. :-)
 19config PROC_HARDWARE
 20	bool "/proc/hardware support"
 21	help
 22	  Say Y here to support the /proc/hardware file, which gives you
 23	  access to information about the machine you're running on,
 24	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
 25	  and memory size.
 26
 27config NATFEAT
 28	bool "ARAnyM emulator support"
 29	depends on ATARI
 30	help
 31	  This option enables support for ARAnyM native features, such as
 32	  access to a disk image as /dev/hda.
 33
 34config NFBLOCK
 35	tristate "NatFeat block device support"
 36	depends on BLOCK && NATFEAT
 37	help
 38	  Say Y to include support for the ARAnyM NatFeat block device
 39	  which allows direct access to the hard drives without using
 40	  the hardware emulation.
 41
 42config NFCON
 43	tristate "NatFeat console driver"
 44	depends on TTY && NATFEAT
 45	help
 46	  Say Y to include support for the ARAnyM NatFeat console driver
 47	  which allows the console output to be redirected to the stderr
 48	  output of ARAnyM.
 49
 50config NFETH
 51	tristate "NatFeat Ethernet support"
 52	depends on ETHERNET && NATFEAT
 53	help
 54	  Say Y to include support for the ARAnyM NatFeat network device
 55	  which will emulate a regular ethernet device while presenting an
 56	  ethertap device to the host system.
 57
 58config ATARI_ETHERNAT
 59	bool "Atari EtherNAT Ethernet support"
 60	depends on ATARI
 61	---help---
 62	  Say Y to include support for the EtherNAT network adapter for the
 63	  CT/60 extension port.
 64
 65	  To compile the actual ethernet driver, choose Y or M for the SMC91X
 66	  option in the network device section; the module will be called smc91x.
 67
 68config ATARI_ETHERNEC
 69	bool "Atari EtherNEC Ethernet support"
 70	depends on ATARI_ROM_ISA
 71	---help---
 72	  Say Y to include support for the EtherNEC network adapter for the
 73	  ROM port. The driver works by polling instead of interrupts, so it
 74	  is quite slow.
 75
 76	  This driver also supports the ethernet part of the NetUSBee ROM
 77	  port combined Ethernet/USB adapter.
 78
 79	  To compile the actual ethernet driver, choose Y or M in for the NE2000
 80	  option in the network device section; the module will be called ne.
 81
 82endmenu
 83
 84menu "Character devices"
 85
 86config ATARI_DSP56K
 87	tristate "Atari DSP56k support"
 88	depends on ATARI
 89	help
 90	  If you want to be able to use the DSP56001 in Falcons, say Y. This
 91	  driver is still experimental, and if you don't know what it is, or
 92	  if you don't have this processor, just say N.
 93
 94	  To compile this driver as a module, choose M here.
 95
 96config AMIGA_BUILTIN_SERIAL
 97	tristate "Amiga builtin serial support"
 98	depends on AMIGA && TTY
 99	help
100	  If you want to use your Amiga's built-in serial port in Linux,
101	  answer Y.
102
103	  To compile this driver as a module, choose M here.
104
105config HPDCA
106	tristate "HP DCA serial support"
107	depends on DIO && SERIAL_8250
108	help
109	  If you want to use the internal "DCA" serial ports on an HP300
110	  machine, say Y here.
111
112config HPAPCI
113	tristate "HP APCI serial support"
114	depends on HP300 && SERIAL_8250
115	help
116	  If you want to use the internal "APCI" serial ports on an HP400
117	  machine, say Y here.
118
119config SERIAL_CONSOLE
120	bool "Support for serial port console"
121	depends on AMIGA_BUILTIN_SERIAL=y
122	---help---
123	  If you say Y here, it will be possible to use a serial port as the
124	  system console (the system console is the device which receives all
125	  kernel messages and warnings and which allows logins in single user
126	  mode). This could be useful if some terminal or printer is connected
127	  to that serial port.
128
129	  Even if you say Y here, the currently visible virtual console
130	  (/dev/tty0) will still be used as the system console by default, but
131	  you can alter that using a kernel command line option such as
132	  "console=ttyS1". (Try "man bootparam" or see the documentation of
133	  your boot loader about how to pass options to the kernel at boot
134	  time.)
135
136	  If you don't have a graphical console and you say Y here, the
137	  kernel will automatically use the first serial line, /dev/ttyS0, as
138	  system console.
139
140	  If unsure, say N.
141
142endmenu
143
144endif