1/* SPDX-License-Identifier: GPL-2.0 */
 2/*
 3 * Board initialization code should put one of these into dev->platform_data
 4 * and place the isp116x onto platform_bus.
 5 */
 6
 7#ifndef __LINUX_USB_ISP116X_H
 8#define __LINUX_USB_ISP116X_H
 9
10struct isp116x_platform_data {
11	/* Enable internal resistors on downstream ports */
12	unsigned sel15Kres:1;
13	/* On-chip overcurrent detection */
14	unsigned oc_enable:1;
15	/* INT output polarity */
16	unsigned int_act_high:1;
17	/* INT edge or level triggered */
18	unsigned int_edge_triggered:1;
19	/* Enable wakeup by devices on usb bus (e.g. wakeup
20	   by attachment/detachment or by device activity
21	   such as moving a mouse). When chosen, this option
22	   prevents stopping internal clock, increasing
23	   thereby power consumption in suspended state. */
24	unsigned remote_wakeup_enable:1;
25	/* Inter-io delay (ns). The chip is picky about access timings; it
26	   expects at least:
27	   150ns delay between consecutive accesses to DATA_REG,
28	   300ns delay between access to ADDR_REG and DATA_REG
29	   OE, WE MUST NOT be changed during these intervals
30	 */
31	void (*delay) (struct device *dev, int delay);
32};
33
34#endif /* __LINUX_USB_ISP116X_H */

 
 1/*
 2 * Board initialization code should put one of these into dev->platform_data
 3 * and place the isp116x onto platform_bus.
 4 */
 5
 6#ifndef __LINUX_USB_ISP116X_H
 7#define __LINUX_USB_ISP116X_H
 8
 9struct isp116x_platform_data {
10	/* Enable internal resistors on downstream ports */
11	unsigned sel15Kres:1;
12	/* On-chip overcurrent detection */
13	unsigned oc_enable:1;
14	/* INT output polarity */
15	unsigned int_act_high:1;
16	/* INT edge or level triggered */
17	unsigned int_edge_triggered:1;
18	/* Enable wakeup by devices on usb bus (e.g. wakeup
19	   by attachment/detachment or by device activity
20	   such as moving a mouse). When chosen, this option
21	   prevents stopping internal clock, increasing
22	   thereby power consumption in suspended state. */
23	unsigned remote_wakeup_enable:1;
24	/* Inter-io delay (ns). The chip is picky about access timings; it
25	   expects at least:
26	   150ns delay between consecutive accesses to DATA_REG,
27	   300ns delay between access to ADDR_REG and DATA_REG
28	   OE, WE MUST NOT be changed during these intervals
29	 */
30	void (*delay) (struct device *dev, int delay);
31};
32
33#endif /* __LINUX_USB_ISP116X_H */