Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Driver for USB Mass Storage compliant devices
4 * SCSI layer glue code
5 *
6 * Current development and maintenance by:
7 * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
8 *
9 * Developed with the assistance of:
10 * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
11 * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
12 *
13 * Initial work by:
14 * (c) 1999 Michael Gee (michael@linuxspecific.com)
15 *
16 * This driver is based on the 'USB Mass Storage Class' document. This
17 * describes in detail the protocol used to communicate with such
18 * devices. Clearly, the designers had SCSI and ATAPI commands in
19 * mind when they created this document. The commands are all very
20 * similar to commands in the SCSI-II and ATAPI specifications.
21 *
22 * It is important to note that in a number of cases this class
23 * exhibits class-specific exemptions from the USB specification.
24 * Notably the usage of NAK, STALL and ACK differs from the norm, in
25 * that they are used to communicate wait, failed and OK on commands.
26 *
27 * Also, for certain devices, the interrupt endpoint is used to convey
28 * status of a command.
29 */
30
31#include <linux/blkdev.h>
32#include <linux/dma-mapping.h>
33#include <linux/module.h>
34#include <linux/mutex.h>
35
36#include <scsi/scsi.h>
37#include <scsi/scsi_cmnd.h>
38#include <scsi/scsi_devinfo.h>
39#include <scsi/scsi_device.h>
40#include <scsi/scsi_eh.h>
41
42#include "usb.h"
43#include <linux/usb/hcd.h>
44#include "scsiglue.h"
45#include "debug.h"
46#include "transport.h"
47#include "protocol.h"
48
49/*
50 * Vendor IDs for companies that seem to include the READ CAPACITY bug
51 * in all their devices
52 */
53#define VENDOR_ID_NOKIA 0x0421
54#define VENDOR_ID_NIKON 0x04b0
55#define VENDOR_ID_PENTAX 0x0a17
56#define VENDOR_ID_MOTOROLA 0x22b8
57
58/***********************************************************************
59 * Host functions
60 ***********************************************************************/
61
62static const char* host_info(struct Scsi_Host *host)
63{
64 struct us_data *us = host_to_us(host);
65 return us->scsi_name;
66}
67
68static int slave_alloc (struct scsi_device *sdev)
69{
70 struct us_data *us = host_to_us(sdev->host);
71
72 /*
73 * Set the INQUIRY transfer length to 36. We don't use any of
74 * the extra data and many devices choke if asked for more or
75 * less than 36 bytes.
76 */
77 sdev->inquiry_len = 36;
78
79 /*
80 * Some host controllers may have alignment requirements.
81 * We'll play it safe by requiring 512-byte alignment always.
82 */
83 blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
84
85 /* Tell the SCSI layer if we know there is more than one LUN */
86 if (us->protocol == USB_PR_BULK && us->max_lun > 0)
87 sdev->sdev_bflags |= BLIST_FORCELUN;
88
89 return 0;
90}
91
92static int slave_configure(struct scsi_device *sdev)
93{
94 struct us_data *us = host_to_us(sdev->host);
95 struct device *dev = us->pusb_dev->bus->sysdev;
96
97 /*
98 * Many devices have trouble transferring more than 32KB at a time,
99 * while others have trouble with more than 64K. At this time we
100 * are limiting both to 32K (64 sectores).
101 */
102 if (us->fflags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) {
103 unsigned int max_sectors = 64;
104
105 if (us->fflags & US_FL_MAX_SECTORS_MIN)
106 max_sectors = PAGE_SIZE >> 9;
107 if (queue_max_hw_sectors(sdev->request_queue) > max_sectors)
108 blk_queue_max_hw_sectors(sdev->request_queue,
109 max_sectors);
110 } else if (sdev->type == TYPE_TAPE) {
111 /*
112 * Tapes need much higher max_sector limits, so just
113 * raise it to the maximum possible (4 GB / 512) and
114 * let the queue segment size sort out the real limit.
115 */
116 blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
117 } else if (us->pusb_dev->speed >= USB_SPEED_SUPER) {
118 /*
119 * USB3 devices will be limited to 2048 sectors. This gives us
120 * better throughput on most devices.
121 */
122 blk_queue_max_hw_sectors(sdev->request_queue, 2048);
123 }
124
125 /*
126 * The max_hw_sectors should be up to maximum size of a mapping for
127 * the device. Otherwise, a DMA API might fail on swiotlb environment.
128 */
129 blk_queue_max_hw_sectors(sdev->request_queue,
130 min_t(size_t, queue_max_hw_sectors(sdev->request_queue),
131 dma_max_mapping_size(dev) >> SECTOR_SHIFT));
132
133 /*
134 * Some USB host controllers can't do DMA; they have to use PIO.
135 * For such controllers we need to make sure the block layer sets
136 * up bounce buffers in addressable memory.
137 */
138 if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) ||
139 (bus_to_hcd(us->pusb_dev->bus)->localmem_pool != NULL))
140 blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
141
142 /*
143 * We can't put these settings in slave_alloc() because that gets
144 * called before the device type is known. Consequently these
145 * settings can't be overridden via the scsi devinfo mechanism.
146 */
147 if (sdev->type == TYPE_DISK) {
148
149 /*
150 * Some vendors seem to put the READ CAPACITY bug into
151 * all their devices -- primarily makers of cell phones
152 * and digital cameras. Since these devices always use
153 * flash media and can be expected to have an even number
154 * of sectors, we will always enable the CAPACITY_HEURISTICS
155 * flag unless told otherwise.
156 */
157 switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
158 case VENDOR_ID_NOKIA:
159 case VENDOR_ID_NIKON:
160 case VENDOR_ID_PENTAX:
161 case VENDOR_ID_MOTOROLA:
162 if (!(us->fflags & (US_FL_FIX_CAPACITY |
163 US_FL_CAPACITY_OK)))
164 us->fflags |= US_FL_CAPACITY_HEURISTICS;
165 break;
166 }
167
168 /*
169 * Disk-type devices use MODE SENSE(6) if the protocol
170 * (SubClass) is Transparent SCSI, otherwise they use
171 * MODE SENSE(10).
172 */
173 if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
174 sdev->use_10_for_ms = 1;
175
176 /*
177 *Many disks only accept MODE SENSE transfer lengths of
178 * 192 bytes (that's what Windows uses).
179 */
180 sdev->use_192_bytes_for_3f = 1;
181
182 /*
183 * Some devices don't like MODE SENSE with page=0x3f,
184 * which is the command used for checking if a device
185 * is write-protected. Now that we tell the sd driver
186 * to do a 192-byte transfer with this command the
187 * majority of devices work fine, but a few still can't
188 * handle it. The sd driver will simply assume those
189 * devices are write-enabled.
190 */
191 if (us->fflags & US_FL_NO_WP_DETECT)
192 sdev->skip_ms_page_3f = 1;
193
194 /*
195 * A number of devices have problems with MODE SENSE for
196 * page x08, so we will skip it.
197 */
198 sdev->skip_ms_page_8 = 1;
199
200 /*
201 * Some devices don't handle VPD pages correctly, so skip vpd
202 * pages if not forced by SCSI layer.
203 */
204 sdev->skip_vpd_pages = !sdev->try_vpd_pages;
205
206 /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */
207 sdev->no_report_opcodes = 1;
208
209 /* Do not attempt to use WRITE SAME */
210 sdev->no_write_same = 1;
211
212 /*
213 * Some disks return the total number of blocks in response
214 * to READ CAPACITY rather than the highest block number.
215 * If this device makes that mistake, tell the sd driver.
216 */
217 if (us->fflags & US_FL_FIX_CAPACITY)
218 sdev->fix_capacity = 1;
219
220 /*
221 * A few disks have two indistinguishable version, one of
222 * which reports the correct capacity and the other does not.
223 * The sd driver has to guess which is the case.
224 */
225 if (us->fflags & US_FL_CAPACITY_HEURISTICS)
226 sdev->guess_capacity = 1;
227
228 /* Some devices cannot handle READ_CAPACITY_16 */
229 if (us->fflags & US_FL_NO_READ_CAPACITY_16)
230 sdev->no_read_capacity_16 = 1;
231
232 /*
233 * Many devices do not respond properly to READ_CAPACITY_16.
234 * Tell the SCSI layer to try READ_CAPACITY_10 first.
235 * However some USB 3.0 drive enclosures return capacity
236 * modulo 2TB. Those must use READ_CAPACITY_16
237 */
238 if (!(us->fflags & US_FL_NEEDS_CAP16))
239 sdev->try_rc_10_first = 1;
240
241 /*
242 * assume SPC3 or latter devices support sense size > 18
243 * unless US_FL_BAD_SENSE quirk is specified.
244 */
245 if (sdev->scsi_level > SCSI_SPC_2 &&
246 !(us->fflags & US_FL_BAD_SENSE))
247 us->fflags |= US_FL_SANE_SENSE;
248
249 /*
250 * USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
251 * Hardware Error) when any low-level error occurs,
252 * recoverable or not. Setting this flag tells the SCSI
253 * midlayer to retry such commands, which frequently will
254 * succeed and fix the error. The worst this can lead to
255 * is an occasional series of retries that will all fail.
256 */
257 sdev->retry_hwerror = 1;
258
259 /*
260 * USB disks should allow restart. Some drives spin down
261 * automatically, requiring a START-STOP UNIT command.
262 */
263 sdev->allow_restart = 1;
264
265 /*
266 * Some USB cardreaders have trouble reading an sdcard's last
267 * sector in a larger then 1 sector read, since the performance
268 * impact is negligible we set this flag for all USB disks
269 */
270 sdev->last_sector_bug = 1;
271
272 /*
273 * Enable last-sector hacks for single-target devices using
274 * the Bulk-only transport, unless we already know the
275 * capacity will be decremented or is correct.
276 */
277 if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
278 US_FL_SCM_MULT_TARG)) &&
279 us->protocol == USB_PR_BULK)
280 us->use_last_sector_hacks = 1;
281
282 /* Check if write cache default on flag is set or not */
283 if (us->fflags & US_FL_WRITE_CACHE)
284 sdev->wce_default_on = 1;
285
286 /* A few buggy USB-ATA bridges don't understand FUA */
287 if (us->fflags & US_FL_BROKEN_FUA)
288 sdev->broken_fua = 1;
289
290 /* Some even totally fail to indicate a cache */
291 if (us->fflags & US_FL_ALWAYS_SYNC) {
292 /* don't read caching information */
293 sdev->skip_ms_page_8 = 1;
294 sdev->skip_ms_page_3f = 1;
295 /* assume sync is needed */
296 sdev->wce_default_on = 1;
297 }
298 } else {
299
300 /*
301 * Non-disk-type devices don't need to ignore any pages
302 * or to force 192-byte transfer lengths for MODE SENSE.
303 * But they do need to use MODE SENSE(10).
304 */
305 sdev->use_10_for_ms = 1;
306
307 /* Some (fake) usb cdrom devices don't like READ_DISC_INFO */
308 if (us->fflags & US_FL_NO_READ_DISC_INFO)
309 sdev->no_read_disc_info = 1;
310 }
311
312 /*
313 * The CB and CBI transports have no way to pass LUN values
314 * other than the bits in the second byte of a CDB. But those
315 * bits don't get set to the LUN value if the device reports
316 * scsi_level == 0 (UNKNOWN). Hence such devices must necessarily
317 * be single-LUN.
318 */
319 if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
320 sdev->scsi_level == SCSI_UNKNOWN)
321 us->max_lun = 0;
322
323 /*
324 * Some devices choke when they receive a PREVENT-ALLOW MEDIUM
325 * REMOVAL command, so suppress those commands.
326 */
327 if (us->fflags & US_FL_NOT_LOCKABLE)
328 sdev->lockable = 0;
329
330 /*
331 * this is to satisfy the compiler, tho I don't think the
332 * return code is ever checked anywhere.
333 */
334 return 0;
335}
336
337static int target_alloc(struct scsi_target *starget)
338{
339 struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent));
340
341 /*
342 * Some USB drives don't support REPORT LUNS, even though they
343 * report a SCSI revision level above 2. Tell the SCSI layer
344 * not to issue that command; it will perform a normal sequential
345 * scan instead.
346 */
347 starget->no_report_luns = 1;
348
349 /*
350 * The UFI spec treats the Peripheral Qualifier bits in an
351 * INQUIRY result as reserved and requires devices to set them
352 * to 0. However the SCSI spec requires these bits to be set
353 * to 3 to indicate when a LUN is not present.
354 *
355 * Let the scanning code know if this target merely sets
356 * Peripheral Device Type to 0x1f to indicate no LUN.
357 */
358 if (us->subclass == USB_SC_UFI)
359 starget->pdt_1f_for_no_lun = 1;
360
361 return 0;
362}
363
364/* queue a command */
365/* This is always called with scsi_lock(host) held */
366static int queuecommand_lck(struct scsi_cmnd *srb,
367 void (*done)(struct scsi_cmnd *))
368{
369 struct us_data *us = host_to_us(srb->device->host);
370
371 /* check for state-transition errors */
372 if (us->srb != NULL) {
373 dev_err(&us->pusb_intf->dev,
374 "Error in %s: us->srb = %p\n", __func__, us->srb);
375 return SCSI_MLQUEUE_HOST_BUSY;
376 }
377
378 /* fail the command if we are disconnecting */
379 if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
380 usb_stor_dbg(us, "Fail command during disconnect\n");
381 srb->result = DID_NO_CONNECT << 16;
382 done(srb);
383 return 0;
384 }
385
386 if ((us->fflags & US_FL_NO_ATA_1X) &&
387 (srb->cmnd[0] == ATA_12 || srb->cmnd[0] == ATA_16)) {
388 memcpy(srb->sense_buffer, usb_stor_sense_invalidCDB,
389 sizeof(usb_stor_sense_invalidCDB));
390 srb->result = SAM_STAT_CHECK_CONDITION;
391 done(srb);
392 return 0;
393 }
394
395 /* enqueue the command and wake up the control thread */
396 srb->scsi_done = done;
397 us->srb = srb;
398 complete(&us->cmnd_ready);
399
400 return 0;
401}
402
403static DEF_SCSI_QCMD(queuecommand)
404
405/***********************************************************************
406 * Error handling functions
407 ***********************************************************************/
408
409/* Command timeout and abort */
410static int command_abort(struct scsi_cmnd *srb)
411{
412 struct us_data *us = host_to_us(srb->device->host);
413
414 usb_stor_dbg(us, "%s called\n", __func__);
415
416 /*
417 * us->srb together with the TIMED_OUT, RESETTING, and ABORTING
418 * bits are protected by the host lock.
419 */
420 scsi_lock(us_to_host(us));
421
422 /* Is this command still active? */
423 if (us->srb != srb) {
424 scsi_unlock(us_to_host(us));
425 usb_stor_dbg(us, "-- nothing to abort\n");
426 return FAILED;
427 }
428
429 /*
430 * Set the TIMED_OUT bit. Also set the ABORTING bit, but only if
431 * a device reset isn't already in progress (to avoid interfering
432 * with the reset). Note that we must retain the host lock while
433 * calling usb_stor_stop_transport(); otherwise it might interfere
434 * with an auto-reset that begins as soon as we release the lock.
435 */
436 set_bit(US_FLIDX_TIMED_OUT, &us->dflags);
437 if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) {
438 set_bit(US_FLIDX_ABORTING, &us->dflags);
439 usb_stor_stop_transport(us);
440 }
441 scsi_unlock(us_to_host(us));
442
443 /* Wait for the aborted command to finish */
444 wait_for_completion(&us->notify);
445 return SUCCESS;
446}
447
448/*
449 * This invokes the transport reset mechanism to reset the state of the
450 * device
451 */
452static int device_reset(struct scsi_cmnd *srb)
453{
454 struct us_data *us = host_to_us(srb->device->host);
455 int result;
456
457 usb_stor_dbg(us, "%s called\n", __func__);
458
459 /* lock the device pointers and do the reset */
460 mutex_lock(&(us->dev_mutex));
461 result = us->transport_reset(us);
462 mutex_unlock(&us->dev_mutex);
463
464 return result < 0 ? FAILED : SUCCESS;
465}
466
467/* Simulate a SCSI bus reset by resetting the device's USB port. */
468static int bus_reset(struct scsi_cmnd *srb)
469{
470 struct us_data *us = host_to_us(srb->device->host);
471 int result;
472
473 usb_stor_dbg(us, "%s called\n", __func__);
474
475 result = usb_stor_port_reset(us);
476 return result < 0 ? FAILED : SUCCESS;
477}
478
479/*
480 * Report a driver-initiated device reset to the SCSI layer.
481 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
482 * The caller must own the SCSI host lock.
483 */
484void usb_stor_report_device_reset(struct us_data *us)
485{
486 int i;
487 struct Scsi_Host *host = us_to_host(us);
488
489 scsi_report_device_reset(host, 0, 0);
490 if (us->fflags & US_FL_SCM_MULT_TARG) {
491 for (i = 1; i < host->max_id; ++i)
492 scsi_report_device_reset(host, 0, i);
493 }
494}
495
496/*
497 * Report a driver-initiated bus reset to the SCSI layer.
498 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
499 * The caller must not own the SCSI host lock.
500 */
501void usb_stor_report_bus_reset(struct us_data *us)
502{
503 struct Scsi_Host *host = us_to_host(us);
504
505 scsi_lock(host);
506 scsi_report_bus_reset(host, 0);
507 scsi_unlock(host);
508}
509
510/***********************************************************************
511 * /proc/scsi/ functions
512 ***********************************************************************/
513
514static int write_info(struct Scsi_Host *host, char *buffer, int length)
515{
516 /* if someone is sending us data, just throw it away */
517 return length;
518}
519
520static int show_info (struct seq_file *m, struct Scsi_Host *host)
521{
522 struct us_data *us = host_to_us(host);
523 const char *string;
524
525 /* print the controller name */
526 seq_printf(m, " Host scsi%d: usb-storage\n", host->host_no);
527
528 /* print product, vendor, and serial number strings */
529 if (us->pusb_dev->manufacturer)
530 string = us->pusb_dev->manufacturer;
531 else if (us->unusual_dev->vendorName)
532 string = us->unusual_dev->vendorName;
533 else
534 string = "Unknown";
535 seq_printf(m, " Vendor: %s\n", string);
536 if (us->pusb_dev->product)
537 string = us->pusb_dev->product;
538 else if (us->unusual_dev->productName)
539 string = us->unusual_dev->productName;
540 else
541 string = "Unknown";
542 seq_printf(m, " Product: %s\n", string);
543 if (us->pusb_dev->serial)
544 string = us->pusb_dev->serial;
545 else
546 string = "None";
547 seq_printf(m, "Serial Number: %s\n", string);
548
549 /* show the protocol and transport */
550 seq_printf(m, " Protocol: %s\n", us->protocol_name);
551 seq_printf(m, " Transport: %s\n", us->transport_name);
552
553 /* show the device flags */
554 seq_printf(m, " Quirks:");
555
556#define US_FLAG(name, value) \
557 if (us->fflags & value) seq_printf(m, " " #name);
558US_DO_ALL_FLAGS
559#undef US_FLAG
560 seq_putc(m, '\n');
561 return 0;
562}
563
564/***********************************************************************
565 * Sysfs interface
566 ***********************************************************************/
567
568/* Output routine for the sysfs max_sectors file */
569static ssize_t max_sectors_show(struct device *dev, struct device_attribute *attr, char *buf)
570{
571 struct scsi_device *sdev = to_scsi_device(dev);
572
573 return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue));
574}
575
576/* Input routine for the sysfs max_sectors file */
577static ssize_t max_sectors_store(struct device *dev, struct device_attribute *attr, const char *buf,
578 size_t count)
579{
580 struct scsi_device *sdev = to_scsi_device(dev);
581 unsigned short ms;
582
583 if (sscanf(buf, "%hu", &ms) > 0) {
584 blk_queue_max_hw_sectors(sdev->request_queue, ms);
585 return count;
586 }
587 return -EINVAL;
588}
589static DEVICE_ATTR_RW(max_sectors);
590
591static struct device_attribute *sysfs_device_attr_list[] = {
592 &dev_attr_max_sectors,
593 NULL,
594};
595
596/*
597 * this defines our host template, with which we'll allocate hosts
598 */
599
600static const struct scsi_host_template usb_stor_host_template = {
601 /* basic userland interface stuff */
602 .name = "usb-storage",
603 .proc_name = "usb-storage",
604 .show_info = show_info,
605 .write_info = write_info,
606 .info = host_info,
607
608 /* command interface -- queued only */
609 .queuecommand = queuecommand,
610
611 /* error and abort handlers */
612 .eh_abort_handler = command_abort,
613 .eh_device_reset_handler = device_reset,
614 .eh_bus_reset_handler = bus_reset,
615
616 /* queue commands only, only one command per LUN */
617 .can_queue = 1,
618
619 /* unknown initiator id */
620 .this_id = -1,
621
622 .slave_alloc = slave_alloc,
623 .slave_configure = slave_configure,
624 .target_alloc = target_alloc,
625
626 /* lots of sg segments can be handled */
627 .sg_tablesize = SG_MAX_SEGMENTS,
628
629
630 /*
631 * Limit the total size of a transfer to 120 KB.
632 *
633 * Some devices are known to choke with anything larger. It seems like
634 * the problem stems from the fact that original IDE controllers had
635 * only an 8-bit register to hold the number of sectors in one transfer
636 * and even those couldn't handle a full 256 sectors.
637 *
638 * Because we want to make sure we interoperate with as many devices as
639 * possible, we will maintain a 240 sector transfer size limit for USB
640 * Mass Storage devices.
641 *
642 * Tests show that other operating have similar limits with Microsoft
643 * Windows 7 limiting transfers to 128 sectors for both USB2 and USB3
644 * and Apple Mac OS X 10.11 limiting transfers to 256 sectors for USB2
645 * and 2048 for USB3 devices.
646 */
647 .max_sectors = 240,
648
649 /* emulated HBA */
650 .emulated = 1,
651
652 /* we do our own delay after a device or bus reset */
653 .skip_settle_delay = 1,
654
655 /* sysfs device attributes */
656 .sdev_attrs = sysfs_device_attr_list,
657
658 /* module management */
659 .module = THIS_MODULE
660};
661
662void usb_stor_host_template_init(struct scsi_host_template *sht,
663 const char *name, struct module *owner)
664{
665 *sht = usb_stor_host_template;
666 sht->name = name;
667 sht->proc_name = name;
668 sht->module = owner;
669}
670EXPORT_SYMBOL_GPL(usb_stor_host_template_init);
671
672/* To Report "Illegal Request: Invalid Field in CDB */
673unsigned char usb_stor_sense_invalidCDB[18] = {
674 [0] = 0x70, /* current error */
675 [2] = ILLEGAL_REQUEST, /* Illegal Request = 0x05 */
676 [7] = 0x0a, /* additional length */
677 [12] = 0x24 /* Invalid Field in CDB */
678};
679EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);
1/* Driver for USB Mass Storage compliant devices
2 * SCSI layer glue code
3 *
4 * Current development and maintenance by:
5 * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
6 *
7 * Developed with the assistance of:
8 * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
9 * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
10 *
11 * Initial work by:
12 * (c) 1999 Michael Gee (michael@linuxspecific.com)
13 *
14 * This driver is based on the 'USB Mass Storage Class' document. This
15 * describes in detail the protocol used to communicate with such
16 * devices. Clearly, the designers had SCSI and ATAPI commands in
17 * mind when they created this document. The commands are all very
18 * similar to commands in the SCSI-II and ATAPI specifications.
19 *
20 * It is important to note that in a number of cases this class
21 * exhibits class-specific exemptions from the USB specification.
22 * Notably the usage of NAK, STALL and ACK differs from the norm, in
23 * that they are used to communicate wait, failed and OK on commands.
24 *
25 * Also, for certain devices, the interrupt endpoint is used to convey
26 * status of a command.
27 *
28 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
29 * information about this driver.
30 *
31 * This program is free software; you can redistribute it and/or modify it
32 * under the terms of the GNU General Public License as published by the
33 * Free Software Foundation; either version 2, or (at your option) any
34 * later version.
35 *
36 * This program is distributed in the hope that it will be useful, but
37 * WITHOUT ANY WARRANTY; without even the implied warranty of
38 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
39 * General Public License for more details.
40 *
41 * You should have received a copy of the GNU General Public License along
42 * with this program; if not, write to the Free Software Foundation, Inc.,
43 * 675 Mass Ave, Cambridge, MA 02139, USA.
44 */
45
46#include <linux/module.h>
47#include <linux/mutex.h>
48
49#include <scsi/scsi.h>
50#include <scsi/scsi_cmnd.h>
51#include <scsi/scsi_devinfo.h>
52#include <scsi/scsi_device.h>
53#include <scsi/scsi_eh.h>
54
55#include "usb.h"
56#include "scsiglue.h"
57#include "debug.h"
58#include "transport.h"
59#include "protocol.h"
60
61/* Vendor IDs for companies that seem to include the READ CAPACITY bug
62 * in all their devices
63 */
64#define VENDOR_ID_NOKIA 0x0421
65#define VENDOR_ID_NIKON 0x04b0
66#define VENDOR_ID_PENTAX 0x0a17
67#define VENDOR_ID_MOTOROLA 0x22b8
68
69/***********************************************************************
70 * Host functions
71 ***********************************************************************/
72
73static const char* host_info(struct Scsi_Host *host)
74{
75 struct us_data *us = host_to_us(host);
76 return us->scsi_name;
77}
78
79static int slave_alloc (struct scsi_device *sdev)
80{
81 /*
82 * Set the INQUIRY transfer length to 36. We don't use any of
83 * the extra data and many devices choke if asked for more or
84 * less than 36 bytes.
85 */
86 sdev->inquiry_len = 36;
87
88 /* USB has unusual DMA-alignment requirements: Although the
89 * starting address of each scatter-gather element doesn't matter,
90 * the length of each element except the last must be divisible
91 * by the Bulk maxpacket value. There's currently no way to
92 * express this by block-layer constraints, so we'll cop out
93 * and simply require addresses to be aligned at 512-byte
94 * boundaries. This is okay since most block I/O involves
95 * hardware sectors that are multiples of 512 bytes in length,
96 * and since host controllers up through USB 2.0 have maxpacket
97 * values no larger than 512.
98 *
99 * But it doesn't suffice for Wireless USB, where Bulk maxpacket
100 * values can be as large as 2048. To make that work properly
101 * will require changes to the block layer.
102 */
103 blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
104
105 return 0;
106}
107
108static int slave_configure(struct scsi_device *sdev)
109{
110 struct us_data *us = host_to_us(sdev->host);
111
112 /* Many devices have trouble transferring more than 32KB at a time,
113 * while others have trouble with more than 64K. At this time we
114 * are limiting both to 32K (64 sectores).
115 */
116 if (us->fflags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) {
117 unsigned int max_sectors = 64;
118
119 if (us->fflags & US_FL_MAX_SECTORS_MIN)
120 max_sectors = PAGE_CACHE_SIZE >> 9;
121 if (queue_max_hw_sectors(sdev->request_queue) > max_sectors)
122 blk_queue_max_hw_sectors(sdev->request_queue,
123 max_sectors);
124 } else if (sdev->type == TYPE_TAPE) {
125 /* Tapes need much higher max_sector limits, so just
126 * raise it to the maximum possible (4 GB / 512) and
127 * let the queue segment size sort out the real limit.
128 */
129 blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
130 }
131
132 /* Some USB host controllers can't do DMA; they have to use PIO.
133 * They indicate this by setting their dma_mask to NULL. For
134 * such controllers we need to make sure the block layer sets
135 * up bounce buffers in addressable memory.
136 */
137 if (!us->pusb_dev->bus->controller->dma_mask)
138 blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
139
140 /* We can't put these settings in slave_alloc() because that gets
141 * called before the device type is known. Consequently these
142 * settings can't be overridden via the scsi devinfo mechanism. */
143 if (sdev->type == TYPE_DISK) {
144
145 /* Some vendors seem to put the READ CAPACITY bug into
146 * all their devices -- primarily makers of cell phones
147 * and digital cameras. Since these devices always use
148 * flash media and can be expected to have an even number
149 * of sectors, we will always enable the CAPACITY_HEURISTICS
150 * flag unless told otherwise. */
151 switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
152 case VENDOR_ID_NOKIA:
153 case VENDOR_ID_NIKON:
154 case VENDOR_ID_PENTAX:
155 case VENDOR_ID_MOTOROLA:
156 if (!(us->fflags & (US_FL_FIX_CAPACITY |
157 US_FL_CAPACITY_OK)))
158 us->fflags |= US_FL_CAPACITY_HEURISTICS;
159 break;
160 }
161
162 /* Disk-type devices use MODE SENSE(6) if the protocol
163 * (SubClass) is Transparent SCSI, otherwise they use
164 * MODE SENSE(10). */
165 if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
166 sdev->use_10_for_ms = 1;
167
168 /* Many disks only accept MODE SENSE transfer lengths of
169 * 192 bytes (that's what Windows uses). */
170 sdev->use_192_bytes_for_3f = 1;
171
172 /* Some devices don't like MODE SENSE with page=0x3f,
173 * which is the command used for checking if a device
174 * is write-protected. Now that we tell the sd driver
175 * to do a 192-byte transfer with this command the
176 * majority of devices work fine, but a few still can't
177 * handle it. The sd driver will simply assume those
178 * devices are write-enabled. */
179 if (us->fflags & US_FL_NO_WP_DETECT)
180 sdev->skip_ms_page_3f = 1;
181
182 /* A number of devices have problems with MODE SENSE for
183 * page x08, so we will skip it. */
184 sdev->skip_ms_page_8 = 1;
185
186 /* Some devices don't handle VPD pages correctly */
187 sdev->skip_vpd_pages = 1;
188
189 /* Some disks return the total number of blocks in response
190 * to READ CAPACITY rather than the highest block number.
191 * If this device makes that mistake, tell the sd driver. */
192 if (us->fflags & US_FL_FIX_CAPACITY)
193 sdev->fix_capacity = 1;
194
195 /* A few disks have two indistinguishable version, one of
196 * which reports the correct capacity and the other does not.
197 * The sd driver has to guess which is the case. */
198 if (us->fflags & US_FL_CAPACITY_HEURISTICS)
199 sdev->guess_capacity = 1;
200
201 /* Some devices cannot handle READ_CAPACITY_16 */
202 if (us->fflags & US_FL_NO_READ_CAPACITY_16)
203 sdev->no_read_capacity_16 = 1;
204
205 /*
206 * Many devices do not respond properly to READ_CAPACITY_16.
207 * Tell the SCSI layer to try READ_CAPACITY_10 first.
208 */
209 sdev->try_rc_10_first = 1;
210
211 /* assume SPC3 or latter devices support sense size > 18 */
212 if (sdev->scsi_level > SCSI_SPC_2)
213 us->fflags |= US_FL_SANE_SENSE;
214
215 /* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
216 * Hardware Error) when any low-level error occurs,
217 * recoverable or not. Setting this flag tells the SCSI
218 * midlayer to retry such commands, which frequently will
219 * succeed and fix the error. The worst this can lead to
220 * is an occasional series of retries that will all fail. */
221 sdev->retry_hwerror = 1;
222
223 /* USB disks should allow restart. Some drives spin down
224 * automatically, requiring a START-STOP UNIT command. */
225 sdev->allow_restart = 1;
226
227 /* Some USB cardreaders have trouble reading an sdcard's last
228 * sector in a larger then 1 sector read, since the performance
229 * impact is negible we set this flag for all USB disks */
230 sdev->last_sector_bug = 1;
231
232 /* Enable last-sector hacks for single-target devices using
233 * the Bulk-only transport, unless we already know the
234 * capacity will be decremented or is correct. */
235 if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
236 US_FL_SCM_MULT_TARG)) &&
237 us->protocol == USB_PR_BULK)
238 us->use_last_sector_hacks = 1;
239 } else {
240
241 /* Non-disk-type devices don't need to blacklist any pages
242 * or to force 192-byte transfer lengths for MODE SENSE.
243 * But they do need to use MODE SENSE(10). */
244 sdev->use_10_for_ms = 1;
245
246 /* Some (fake) usb cdrom devices don't like READ_DISC_INFO */
247 if (us->fflags & US_FL_NO_READ_DISC_INFO)
248 sdev->no_read_disc_info = 1;
249 }
250
251 /* The CB and CBI transports have no way to pass LUN values
252 * other than the bits in the second byte of a CDB. But those
253 * bits don't get set to the LUN value if the device reports
254 * scsi_level == 0 (UNKNOWN). Hence such devices must necessarily
255 * be single-LUN.
256 */
257 if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
258 sdev->scsi_level == SCSI_UNKNOWN)
259 us->max_lun = 0;
260
261 /* Some devices choke when they receive a PREVENT-ALLOW MEDIUM
262 * REMOVAL command, so suppress those commands. */
263 if (us->fflags & US_FL_NOT_LOCKABLE)
264 sdev->lockable = 0;
265
266 /* this is to satisfy the compiler, tho I don't think the
267 * return code is ever checked anywhere. */
268 return 0;
269}
270
271static int target_alloc(struct scsi_target *starget)
272{
273 struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent));
274
275 /*
276 * Some USB drives don't support REPORT LUNS, even though they
277 * report a SCSI revision level above 2. Tell the SCSI layer
278 * not to issue that command; it will perform a normal sequential
279 * scan instead.
280 */
281 starget->no_report_luns = 1;
282
283 /*
284 * The UFI spec treats the Peripheral Qualifier bits in an
285 * INQUIRY result as reserved and requires devices to set them
286 * to 0. However the SCSI spec requires these bits to be set
287 * to 3 to indicate when a LUN is not present.
288 *
289 * Let the scanning code know if this target merely sets
290 * Peripheral Device Type to 0x1f to indicate no LUN.
291 */
292 if (us->subclass == USB_SC_UFI)
293 starget->pdt_1f_for_no_lun = 1;
294
295 return 0;
296}
297
298/* queue a command */
299/* This is always called with scsi_lock(host) held */
300static int queuecommand_lck(struct scsi_cmnd *srb,
301 void (*done)(struct scsi_cmnd *))
302{
303 struct us_data *us = host_to_us(srb->device->host);
304
305 US_DEBUGP("%s called\n", __func__);
306
307 /* check for state-transition errors */
308 if (us->srb != NULL) {
309 printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n",
310 __func__, us->srb);
311 return SCSI_MLQUEUE_HOST_BUSY;
312 }
313
314 /* fail the command if we are disconnecting */
315 if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
316 US_DEBUGP("Fail command during disconnect\n");
317 srb->result = DID_NO_CONNECT << 16;
318 done(srb);
319 return 0;
320 }
321
322 /* enqueue the command and wake up the control thread */
323 srb->scsi_done = done;
324 us->srb = srb;
325 complete(&us->cmnd_ready);
326
327 return 0;
328}
329
330static DEF_SCSI_QCMD(queuecommand)
331
332/***********************************************************************
333 * Error handling functions
334 ***********************************************************************/
335
336/* Command timeout and abort */
337static int command_abort(struct scsi_cmnd *srb)
338{
339 struct us_data *us = host_to_us(srb->device->host);
340
341 US_DEBUGP("%s called\n", __func__);
342
343 /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING
344 * bits are protected by the host lock. */
345 scsi_lock(us_to_host(us));
346
347 /* Is this command still active? */
348 if (us->srb != srb) {
349 scsi_unlock(us_to_host(us));
350 US_DEBUGP ("-- nothing to abort\n");
351 return FAILED;
352 }
353
354 /* Set the TIMED_OUT bit. Also set the ABORTING bit, but only if
355 * a device reset isn't already in progress (to avoid interfering
356 * with the reset). Note that we must retain the host lock while
357 * calling usb_stor_stop_transport(); otherwise it might interfere
358 * with an auto-reset that begins as soon as we release the lock. */
359 set_bit(US_FLIDX_TIMED_OUT, &us->dflags);
360 if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) {
361 set_bit(US_FLIDX_ABORTING, &us->dflags);
362 usb_stor_stop_transport(us);
363 }
364 scsi_unlock(us_to_host(us));
365
366 /* Wait for the aborted command to finish */
367 wait_for_completion(&us->notify);
368 return SUCCESS;
369}
370
371/* This invokes the transport reset mechanism to reset the state of the
372 * device */
373static int device_reset(struct scsi_cmnd *srb)
374{
375 struct us_data *us = host_to_us(srb->device->host);
376 int result;
377
378 US_DEBUGP("%s called\n", __func__);
379
380 /* lock the device pointers and do the reset */
381 mutex_lock(&(us->dev_mutex));
382 result = us->transport_reset(us);
383 mutex_unlock(&us->dev_mutex);
384
385 return result < 0 ? FAILED : SUCCESS;
386}
387
388/* Simulate a SCSI bus reset by resetting the device's USB port. */
389static int bus_reset(struct scsi_cmnd *srb)
390{
391 struct us_data *us = host_to_us(srb->device->host);
392 int result;
393
394 US_DEBUGP("%s called\n", __func__);
395 result = usb_stor_port_reset(us);
396 return result < 0 ? FAILED : SUCCESS;
397}
398
399/* Report a driver-initiated device reset to the SCSI layer.
400 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
401 * The caller must own the SCSI host lock. */
402void usb_stor_report_device_reset(struct us_data *us)
403{
404 int i;
405 struct Scsi_Host *host = us_to_host(us);
406
407 scsi_report_device_reset(host, 0, 0);
408 if (us->fflags & US_FL_SCM_MULT_TARG) {
409 for (i = 1; i < host->max_id; ++i)
410 scsi_report_device_reset(host, 0, i);
411 }
412}
413
414/* Report a driver-initiated bus reset to the SCSI layer.
415 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
416 * The caller must not own the SCSI host lock. */
417void usb_stor_report_bus_reset(struct us_data *us)
418{
419 struct Scsi_Host *host = us_to_host(us);
420
421 scsi_lock(host);
422 scsi_report_bus_reset(host, 0);
423 scsi_unlock(host);
424}
425
426/***********************************************************************
427 * /proc/scsi/ functions
428 ***********************************************************************/
429
430/* we use this macro to help us write into the buffer */
431#undef SPRINTF
432#define SPRINTF(args...) \
433 do { if (pos < buffer+length) pos += sprintf(pos, ## args); } while (0)
434
435static int proc_info (struct Scsi_Host *host, char *buffer,
436 char **start, off_t offset, int length, int inout)
437{
438 struct us_data *us = host_to_us(host);
439 char *pos = buffer;
440 const char *string;
441
442 /* if someone is sending us data, just throw it away */
443 if (inout)
444 return length;
445
446 /* print the controller name */
447 SPRINTF(" Host scsi%d: usb-storage\n", host->host_no);
448
449 /* print product, vendor, and serial number strings */
450 if (us->pusb_dev->manufacturer)
451 string = us->pusb_dev->manufacturer;
452 else if (us->unusual_dev->vendorName)
453 string = us->unusual_dev->vendorName;
454 else
455 string = "Unknown";
456 SPRINTF(" Vendor: %s\n", string);
457 if (us->pusb_dev->product)
458 string = us->pusb_dev->product;
459 else if (us->unusual_dev->productName)
460 string = us->unusual_dev->productName;
461 else
462 string = "Unknown";
463 SPRINTF(" Product: %s\n", string);
464 if (us->pusb_dev->serial)
465 string = us->pusb_dev->serial;
466 else
467 string = "None";
468 SPRINTF("Serial Number: %s\n", string);
469
470 /* show the protocol and transport */
471 SPRINTF(" Protocol: %s\n", us->protocol_name);
472 SPRINTF(" Transport: %s\n", us->transport_name);
473
474 /* show the device flags */
475 if (pos < buffer + length) {
476 pos += sprintf(pos, " Quirks:");
477
478#define US_FLAG(name, value) \
479 if (us->fflags & value) pos += sprintf(pos, " " #name);
480US_DO_ALL_FLAGS
481#undef US_FLAG
482
483 *(pos++) = '\n';
484 }
485
486 /*
487 * Calculate start of next buffer, and return value.
488 */
489 *start = buffer + offset;
490
491 if ((pos - buffer) < offset)
492 return (0);
493 else if ((pos - buffer - offset) < length)
494 return (pos - buffer - offset);
495 else
496 return (length);
497}
498
499/***********************************************************************
500 * Sysfs interface
501 ***********************************************************************/
502
503/* Output routine for the sysfs max_sectors file */
504static ssize_t show_max_sectors(struct device *dev, struct device_attribute *attr, char *buf)
505{
506 struct scsi_device *sdev = to_scsi_device(dev);
507
508 return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue));
509}
510
511/* Input routine for the sysfs max_sectors file */
512static ssize_t store_max_sectors(struct device *dev, struct device_attribute *attr, const char *buf,
513 size_t count)
514{
515 struct scsi_device *sdev = to_scsi_device(dev);
516 unsigned short ms;
517
518 if (sscanf(buf, "%hu", &ms) > 0) {
519 blk_queue_max_hw_sectors(sdev->request_queue, ms);
520 return count;
521 }
522 return -EINVAL;
523}
524
525static DEVICE_ATTR(max_sectors, S_IRUGO | S_IWUSR, show_max_sectors,
526 store_max_sectors);
527
528static struct device_attribute *sysfs_device_attr_list[] = {
529 &dev_attr_max_sectors,
530 NULL,
531 };
532
533/*
534 * this defines our host template, with which we'll allocate hosts
535 */
536
537struct scsi_host_template usb_stor_host_template = {
538 /* basic userland interface stuff */
539 .name = "usb-storage",
540 .proc_name = "usb-storage",
541 .proc_info = proc_info,
542 .info = host_info,
543
544 /* command interface -- queued only */
545 .queuecommand = queuecommand,
546
547 /* error and abort handlers */
548 .eh_abort_handler = command_abort,
549 .eh_device_reset_handler = device_reset,
550 .eh_bus_reset_handler = bus_reset,
551
552 /* queue commands only, only one command per LUN */
553 .can_queue = 1,
554 .cmd_per_lun = 1,
555
556 /* unknown initiator id */
557 .this_id = -1,
558
559 .slave_alloc = slave_alloc,
560 .slave_configure = slave_configure,
561 .target_alloc = target_alloc,
562
563 /* lots of sg segments can be handled */
564 .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
565
566 /* limit the total size of a transfer to 120 KB */
567 .max_sectors = 240,
568
569 /* merge commands... this seems to help performance, but
570 * periodically someone should test to see which setting is more
571 * optimal.
572 */
573 .use_clustering = 1,
574
575 /* emulated HBA */
576 .emulated = 1,
577
578 /* we do our own delay after a device or bus reset */
579 .skip_settle_delay = 1,
580
581 /* sysfs device attributes */
582 .sdev_attrs = sysfs_device_attr_list,
583
584 /* module management */
585 .module = THIS_MODULE
586};
587
588/* To Report "Illegal Request: Invalid Field in CDB */
589unsigned char usb_stor_sense_invalidCDB[18] = {
590 [0] = 0x70, /* current error */
591 [2] = ILLEGAL_REQUEST, /* Illegal Request = 0x05 */
592 [7] = 0x0a, /* additional length */
593 [12] = 0x24 /* Invalid Field in CDB */
594};
595EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);