Loading...
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Storage driver configuration
4#
5
6comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
7comment "also be needed; see USB_STORAGE Help for more info"
8
9config USB_STORAGE
10 tristate "USB Mass Storage support"
11 depends on SCSI
12 help
13 Say Y here if you want to connect USB mass storage devices to your
14 computer's USB port. This is the driver you need for USB
15 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
16 USB flash devices, and memory sticks, along with
17 similar devices. This driver may also be used for some cameras
18 and card readers.
19
20 This option depends on 'SCSI' support being enabled, but you
21 probably also need 'SCSI device support: SCSI disk support'
22 (BLK_DEV_SD) for most USB storage devices.
23
24 To compile this driver as a module, choose M here: the
25 module will be called usb-storage.
26
27if USB_STORAGE
28
29config USB_STORAGE_DEBUG
30 bool "USB Mass Storage verbose debug"
31 help
32 Say Y here in order to have the USB Mass Storage code generate
33 verbose debugging messages.
34
35config USB_STORAGE_REALTEK
36 tristate "Realtek Card Reader support"
37 help
38 Say Y here to include additional code to support the power-saving function
39 for Realtek RTS51xx USB card readers.
40
41 If this driver is compiled as a module, it will be named ums-realtek.
42
43config REALTEK_AUTOPM
44 bool "Realtek Card Reader autosuspend support"
45 depends on USB_STORAGE_REALTEK && PM
46 default y
47
48config USB_STORAGE_DATAFAB
49 tristate "Datafab Compact Flash Reader support"
50 help
51 Support for certain Datafab CompactFlash readers.
52 Datafab has a web page at <http://www.datafab.com/>.
53
54 If this driver is compiled as a module, it will be named ums-datafab.
55
56config USB_STORAGE_FREECOM
57 tristate "Freecom USB/ATAPI Bridge support"
58 help
59 Support for the Freecom USB to IDE/ATAPI adaptor.
60 Freecom has a web page at <https://www.freecom.de/>.
61
62 If this driver is compiled as a module, it will be named ums-freecom.
63
64config USB_STORAGE_ISD200
65 tristate "ISD-200 USB/ATA Bridge support"
66 help
67 Say Y here if you want to use USB Mass Store devices based
68 on the In-Systems Design ISD-200 USB/ATA bridge.
69
70 Some of the products that use this chip are:
71
72 - Archos Jukebox 6000
73 - ISD SmartCable for Storage
74 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
75 - Sony CRX10U CD-R/RW drive
76 - CyQ've CQ8060A CDRW drive
77 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
78
79 If this driver is compiled as a module, it will be named ums-isd200.
80
81config USB_STORAGE_USBAT
82 tristate "USBAT/USBAT02-based storage support"
83 help
84 Say Y here to include additional code to support storage devices
85 based on the SCM/Shuttle USBAT/USBAT02 processors.
86
87 Devices reported to work with this driver include:
88 - CompactFlash reader included with Kodak DC3800 camera
89 - Dane-Elec Zmate CompactFlash reader
90 - Delkin Efilm reader2
91 - HP 8200e/8210e/8230e CD-Writer Plus drives
92 - I-JAM JS-50U
93 - Jessops CompactFlash JESDCFRU BLACK
94 - Kingston Technology PCREAD-USB/CF
95 - Maxell UA4 CompactFlash reader
96 - Memorex UCF-100
97 - Microtech ZiO! ICS-45 CF2
98 - RCA LYRA MP3 portable
99 - Sandisk ImageMate SDDR-05b
100
101 If this driver is compiled as a module, it will be named ums-usbat.
102
103config USB_STORAGE_SDDR09
104 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
105 help
106 Say Y here to include additional code to support the Sandisk SDDR-09
107 SmartMedia reader in the USB Mass Storage driver.
108 Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
109
110 If this driver is compiled as a module, it will be named ums-sddr09.
111
112config USB_STORAGE_SDDR55
113 tristate "SanDisk SDDR-55 SmartMedia support"
114 help
115 Say Y here to include additional code to support the Sandisk SDDR-55
116 SmartMedia reader in the USB Mass Storage driver.
117
118 If this driver is compiled as a module, it will be named ums-sddr55.
119
120config USB_STORAGE_JUMPSHOT
121 tristate "Lexar Jumpshot Compact Flash Reader"
122 help
123 Say Y here to include additional code to support the Lexar Jumpshot
124 USB CompactFlash reader.
125
126 If this driver is compiled as a module, it will be named ums-jumpshot.
127
128config USB_STORAGE_ALAUDA
129 tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
130 help
131 Say Y here to include additional code to support the Olympus MAUSB-10
132 and Fujifilm DPC-R1 USB Card reader/writer devices.
133
134 These devices are based on the Alauda chip and support both
135 XD and SmartMedia cards.
136
137 If this driver is compiled as a module, it will be named ums-alauda.
138
139config USB_STORAGE_ONETOUCH
140 tristate "Support OneTouch Button on Maxtor Hard Drives"
141 depends on INPUT=y || INPUT=USB_STORAGE
142 help
143 Say Y here to include additional code to support the Maxtor OneTouch
144 USB hard drive's onetouch button.
145
146 This code registers the button on the front of Maxtor OneTouch USB
147 hard drive's as an input device. An action can be associated with
148 this input in any keybinding software. (e.g. gnome's keyboard short-
149 cuts)
150
151 If this driver is compiled as a module, it will be named ums-onetouch.
152
153config USB_STORAGE_KARMA
154 tristate "Support for Rio Karma music player"
155 help
156 Say Y here to include additional code to support the Rio Karma
157 USB interface.
158
159 This code places the Rio Karma into mass storage mode, enabling
160 it to be mounted as an ordinary filesystem. Performing an eject
161 on the resulting scsi device node returns the Karma to normal
162 operation.
163
164 If this driver is compiled as a module, it will be named ums-karma.
165
166config USB_STORAGE_CYPRESS_ATACB
167 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
168 help
169 Say Y here if you want to use SAT (ata pass through) on devices based
170 on the Cypress USB/ATA bridge supporting ATACB. This will allow you
171 to use tools to tune and monitor your drive (like hdparm or smartctl).
172
173 If you say no here your device will still work with the standard usb
174 mass storage class.
175
176 If this driver is compiled as a module, it will be named ums-cypress.
177
178config USB_STORAGE_ENE_UB6250
179 tristate "USB ENE card reader support"
180 help
181 Say Y here if you wish to control a ENE SD/MS Card reader.
182 Note that this driver does not support SM cards.
183
184 To compile this driver as a module, choose M here: the
185 module will be called ums-eneub6250.
186
187endif # USB_STORAGE
188
189config USB_UAS
190 tristate "USB Attached SCSI"
191 depends on SCSI && USB_STORAGE
192 help
193 The USB Attached SCSI protocol is supported by some USB
194 storage devices. It permits higher performance by supporting
195 multiple outstanding commands.
196
197 If you don't know whether you have a UAS device, it is safe to
198 say 'Y' or 'M' here and the kernel will use the right driver.
199
200 If you compile this driver as a module, it will be named uas.
1#
2# USB Storage driver configuration
3#
4
5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
6comment "also be needed; see USB_STORAGE Help for more info"
7 depends on USB
8
9config USB_STORAGE
10 tristate "USB Mass Storage support"
11 depends on USB && SCSI
12 ---help---
13 Say Y here if you want to connect USB mass storage devices to your
14 computer's USB port. This is the driver you need for USB
15 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
16 USB flash devices, and memory sticks, along with
17 similar devices. This driver may also be used for some cameras
18 and card readers.
19
20 This option depends on 'SCSI' support being enabled, but you
21 probably also need 'SCSI device support: SCSI disk support'
22 (BLK_DEV_SD) for most USB storage devices.
23
24 To compile this driver as a module, choose M here: the
25 module will be called usb-storage.
26
27config USB_STORAGE_DEBUG
28 bool "USB Mass Storage verbose debug"
29 depends on USB_STORAGE
30 help
31 Say Y here in order to have the USB Mass Storage code generate
32 verbose debugging messages.
33
34config USB_STORAGE_REALTEK
35 tristate "Realtek Card Reader support"
36 depends on USB_STORAGE
37 help
38 Say Y here to include additional code to support the power-saving function
39 for Realtek RTS51xx USB card readers.
40
41 If this driver is compiled as a module, it will be named ums-realtek.
42
43config REALTEK_AUTOPM
44 bool "Realtek Card Reader autosuspend support"
45 depends on USB_STORAGE_REALTEK && PM_RUNTIME
46 default y
47
48config USB_STORAGE_DATAFAB
49 tristate "Datafab Compact Flash Reader support"
50 depends on USB_STORAGE
51 help
52 Support for certain Datafab CompactFlash readers.
53 Datafab has a web page at <http://www.datafab.com/>.
54
55 If this driver is compiled as a module, it will be named ums-datafab.
56
57config USB_STORAGE_FREECOM
58 tristate "Freecom USB/ATAPI Bridge support"
59 depends on USB_STORAGE
60 help
61 Support for the Freecom USB to IDE/ATAPI adaptor.
62 Freecom has a web page at <http://www.freecom.de/>.
63
64 If this driver is compiled as a module, it will be named ums-freecom.
65
66config USB_STORAGE_ISD200
67 tristate "ISD-200 USB/ATA Bridge support"
68 depends on USB_STORAGE
69 ---help---
70 Say Y here if you want to use USB Mass Store devices based
71 on the In-Systems Design ISD-200 USB/ATA bridge.
72
73 Some of the products that use this chip are:
74
75 - Archos Jukebox 6000
76 - ISD SmartCable for Storage
77 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
78 - Sony CRX10U CD-R/RW drive
79 - CyQ've CQ8060A CDRW drive
80 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
81
82 If this driver is compiled as a module, it will be named ums-isd200.
83
84config USB_STORAGE_USBAT
85 tristate "USBAT/USBAT02-based storage support"
86 depends on USB_STORAGE
87 help
88 Say Y here to include additional code to support storage devices
89 based on the SCM/Shuttle USBAT/USBAT02 processors.
90
91 Devices reported to work with this driver include:
92 - CompactFlash reader included with Kodak DC3800 camera
93 - Dane-Elec Zmate CompactFlash reader
94 - Delkin Efilm reader2
95 - HP 8200e/8210e/8230e CD-Writer Plus drives
96 - I-JAM JS-50U
97 - Jessops CompactFlash JESDCFRU BLACK
98 - Kingston Technology PCREAD-USB/CF
99 - Maxell UA4 CompactFlash reader
100 - Memorex UCF-100
101 - Microtech ZiO! ICS-45 CF2
102 - RCA LYRA MP3 portable
103 - Sandisk ImageMate SDDR-05b
104
105 If this driver is compiled as a module, it will be named ums-usbat.
106
107config USB_STORAGE_SDDR09
108 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
109 depends on USB_STORAGE
110 help
111 Say Y here to include additional code to support the Sandisk SDDR-09
112 SmartMedia reader in the USB Mass Storage driver.
113 Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
114
115 If this driver is compiled as a module, it will be named ums-sddr09.
116
117config USB_STORAGE_SDDR55
118 tristate "SanDisk SDDR-55 SmartMedia support"
119 depends on USB_STORAGE
120 help
121 Say Y here to include additional code to support the Sandisk SDDR-55
122 SmartMedia reader in the USB Mass Storage driver.
123
124 If this driver is compiled as a module, it will be named ums-sddr55.
125
126config USB_STORAGE_JUMPSHOT
127 tristate "Lexar Jumpshot Compact Flash Reader"
128 depends on USB_STORAGE
129 help
130 Say Y here to include additional code to support the Lexar Jumpshot
131 USB CompactFlash reader.
132
133 If this driver is compiled as a module, it will be named ums-jumpshot.
134
135config USB_STORAGE_ALAUDA
136 tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
137 depends on USB_STORAGE
138 help
139 Say Y here to include additional code to support the Olympus MAUSB-10
140 and Fujifilm DPC-R1 USB Card reader/writer devices.
141
142 These devices are based on the Alauda chip and support both
143 XD and SmartMedia cards.
144
145 If this driver is compiled as a module, it will be named ums-alauda.
146
147config USB_STORAGE_ONETOUCH
148 tristate "Support OneTouch Button on Maxtor Hard Drives"
149 depends on USB_STORAGE
150 depends on INPUT=y || INPUT=USB_STORAGE
151 help
152 Say Y here to include additional code to support the Maxtor OneTouch
153 USB hard drive's onetouch button.
154
155 This code registers the button on the front of Maxtor OneTouch USB
156 hard drive's as an input device. An action can be associated with
157 this input in any keybinding software. (e.g. gnome's keyboard short-
158 cuts)
159
160 If this driver is compiled as a module, it will be named ums-onetouch.
161
162config USB_STORAGE_KARMA
163 tristate "Support for Rio Karma music player"
164 depends on USB_STORAGE
165 help
166 Say Y here to include additional code to support the Rio Karma
167 USB interface.
168
169 This code places the Rio Karma into mass storage mode, enabling
170 it to be mounted as an ordinary filesystem. Performing an eject
171 on the resulting scsi device node returns the Karma to normal
172 operation.
173
174 If this driver is compiled as a module, it will be named ums-karma.
175
176config USB_STORAGE_CYPRESS_ATACB
177 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
178 depends on USB_STORAGE
179 ---help---
180 Say Y here if you want to use SAT (ata pass through) on devices based
181 on the Cypress USB/ATA bridge supporting ATACB. This will allow you
182 to use tools to tune and monitor your drive (like hdparm or smartctl).
183
184 If you say no here your device will still work with the standard usb
185 mass storage class.
186
187 If this driver is compiled as a module, it will be named ums-cypress.
188
189config USB_STORAGE_ENE_UB6250
190 tristate "USB ENE card reader support"
191 depends on USB && SCSI
192 depends on USB_STORAGE
193 ---help---
194 Say Y here if you wish to control a ENE SD/MS Card reader.
195 To use SM card, please build driver/staging/keucr/keucr.ko
196
197 This option depends on 'SCSI' support being enabled, but you
198 probably also need 'SCSI device support: SCSI disk support'
199 (BLK_DEV_SD) for most USB storage devices.
200
201 To compile this driver as a module, choose M here: the
202 module will be called ums-eneub6250.
203
204config USB_UAS
205 tristate "USB Attached SCSI"
206 depends on USB && SCSI
207 help
208 The USB Attached SCSI protocol is supported by some USB
209 storage devices. It permits higher performance by supporting
210 multiple outstanding commands.
211
212 If you don't know whether you have a UAS device, it is safe to
213 say 'Y' or 'M' here and the kernel will use the right driver.
214
215 If you compile this driver as a module, it will be named uas.
216
217config USB_LIBUSUAL
218 bool "The shared table of common (or usual) storage devices"
219 depends on USB
220 help
221 This module contains a table of common (or usual) devices
222 for usb-storage and ub drivers, and allows to switch binding
223 of these devices without rebuilding modules.
224
225 Typical syntax of /etc/modprobe.d/*conf is:
226
227 options libusual bias="ub"
228
229 If unsure, say N.