Loading...
Note: File does not exist in v5.9.
1/*
2 * P3060QDS Device Tree Source
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35/include/ "fsl/p3060si-pre.dtsi"
36
37/ {
38 model = "fsl,P3060QDS";
39 compatible = "fsl,P3060QDS";
40 #address-cells = <2>;
41 #size-cells = <2>;
42 interrupt-parent = <&mpic>;
43
44 memory {
45 device_type = "memory";
46 };
47
48 dcsr: dcsr@f00000000 {
49 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
50 };
51
52 soc: soc@ffe000000 {
53 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
54 reg = <0xf 0xfe000000 0 0x00001000>;
55 spi@110000 {
56 flash@0 {
57 #address-cells = <1>;
58 #size-cells = <1>;
59 compatible = "spansion,s25sl12801";
60 reg = <0>;
61 spi-max-frequency = <40000000>; /* input clock */
62 partition@u-boot {
63 label = "u-boot";
64 reg = <0x00000000 0x00100000>;
65 read-only;
66 };
67 partition@kernel {
68 label = "kernel";
69 reg = <0x00100000 0x00500000>;
70 read-only;
71 };
72 partition@dtb {
73 label = "dtb";
74 reg = <0x00600000 0x00100000>;
75 read-only;
76 };
77 partition@fs {
78 label = "file system";
79 reg = <0x00700000 0x00900000>;
80 };
81 };
82 flash@1 {
83 #address-cells = <1>;
84 #size-cells = <1>;
85 compatible = "spansion,en25q32b";
86 reg = <1>;
87 spi-max-frequency = <40000000>; /* input clock */
88 partition@spi1 {
89 label = "spi1";
90 reg = <0x00000000 0x00400000>;
91 };
92 };
93 flash@2 {
94 #address-cells = <1>;
95 #size-cells = <1>;
96 compatible = "atmel,at45db081d";
97 reg = <2>;
98 spi-max-frequency = <40000000>; /* input clock */
99 partition@spi1 {
100 label = "spi2";
101 reg = <0x00000000 0x00100000>;
102 };
103 };
104 flash@3 {
105 #address-cells = <1>;
106 #size-cells = <1>;
107 compatible = "spansion,sst25wf040";
108 reg = <3>;
109 spi-max-frequency = <40000000>; /* input clock */
110 partition@spi3 {
111 label = "spi3";
112 reg = <0x00000000 0x00080000>;
113 };
114 };
115 };
116
117 i2c@118000 {
118 eeprom@51 {
119 compatible = "at24,24c256";
120 reg = <0x51>;
121 };
122 eeprom@53 {
123 compatible = "at24,24c256";
124 reg = <0x53>;
125 };
126 rtc@68 {
127 compatible = "dallas,ds3232";
128 reg = <0x68>;
129 interrupts = <0x1 0x1 0 0>;
130 };
131 };
132
133 usb0: usb@210000 {
134 phy_type = "ulpi";
135 };
136
137 usb1: usb@211000 {
138 dr_mode = "host";
139 phy_type = "ulpi";
140 };
141 };
142
143 rio: rapidio@ffe0c0000 {
144 reg = <0xf 0xfe0c0000 0 0x11000>;
145
146 port1 {
147 ranges = <0 0 0xc 0x20000000 0 0x10000000>;
148 };
149 port2 {
150 ranges = <0 0 0xc 0x30000000 0 0x10000000>;
151 };
152 };
153
154 lbc: localbus@ffe124000 {
155 reg = <0xf 0xfe124000 0 0x1000>;
156 ranges = <0 0 0xf 0xe8000000 0x08000000
157 2 0 0xf 0xffa00000 0x00040000
158 3 0 0xf 0xffdf0000 0x00008000>;
159
160 flash@0,0 {
161 compatible = "cfi-flash";
162 reg = <0 0 0x08000000>;
163 bank-width = <2>;
164 device-width = <2>;
165 };
166
167 nand@2,0 {
168 #address-cells = <1>;
169 #size-cells = <1>;
170 compatible = "fsl,elbc-fcm-nand";
171 reg = <0x2 0x0 0x40000>;
172
173 partition@0 {
174 label = "NAND U-Boot Image";
175 reg = <0x0 0x02000000>;
176 read-only;
177 };
178
179 partition@2000000 {
180 label = "NAND Root File System";
181 reg = <0x02000000 0x10000000>;
182 };
183
184 partition@12000000 {
185 label = "NAND Compressed RFS Image";
186 reg = <0x12000000 0x08000000>;
187 };
188
189 partition@1a000000 {
190 label = "NAND Linux Kernel Image";
191 reg = <0x1a000000 0x04000000>;
192 };
193
194 partition@1e000000 {
195 label = "NAND DTB Image";
196 reg = <0x1e000000 0x01000000>;
197 };
198
199 partition@1f000000 {
200 label = "NAND Writable User area";
201 reg = <0x1f000000 0x21000000>;
202 };
203 };
204
205 board-control@3,0 {
206 compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis";
207 reg = <3 0 0x100>;
208 };
209 };
210
211 pci0: pcie@ffe200000 {
212 reg = <0xf 0xfe200000 0 0x1000>;
213 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
214 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
215 pcie@0 {
216 ranges = <0x02000000 0 0xe0000000
217 0x02000000 0 0xe0000000
218 0 0x20000000
219
220 0x01000000 0 0x00000000
221 0x01000000 0 0x00000000
222 0 0x00010000>;
223 };
224 };
225
226 pci1: pcie@ffe201000 {
227 reg = <0xf 0xfe201000 0 0x1000>;
228 ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
229 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
230 pcie@0 {
231 ranges = <0x02000000 0 0xe0000000
232 0x02000000 0 0xe0000000
233 0 0x20000000
234
235 0x01000000 0 0x00000000
236 0x01000000 0 0x00000000
237 0 0x00010000>;
238 };
239 };
240};
241
242/include/ "fsl/p3060si-post.dtsi"