Loading...
1/*
2 * usbmidi.c - ALSA USB MIDI driver
3 *
4 * Copyright (c) 2002-2009 Clemens Ladisch
5 * All rights reserved.
6 *
7 * Based on the OSS usb-midi driver by NAGANO Daisuke,
8 * NetBSD's umidi driver by Takuya SHIOZAKI,
9 * the "USB Device Class Definition for MIDI Devices" by Roland
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. The name of the author may not be used to endorse or promote products
18 * derived from this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed and/or modified under the
21 * terms of the GNU General Public License as published by the Free Software
22 * Foundation; either version 2 of the License, or (at your option) any later
23 * version.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
28 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
29 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
33 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
34 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
35 * SUCH DAMAGE.
36 */
37
38#include <linux/kernel.h>
39#include <linux/types.h>
40#include <linux/bitops.h>
41#include <linux/interrupt.h>
42#include <linux/spinlock.h>
43#include <linux/string.h>
44#include <linux/init.h>
45#include <linux/slab.h>
46#include <linux/timer.h>
47#include <linux/usb.h>
48#include <linux/wait.h>
49#include <linux/usb/audio.h>
50#include <linux/module.h>
51
52#include <sound/core.h>
53#include <sound/control.h>
54#include <sound/rawmidi.h>
55#include <sound/asequencer.h>
56#include "usbaudio.h"
57#include "midi.h"
58#include "power.h"
59#include "helper.h"
60
61/*
62 * define this to log all USB packets
63 */
64/* #define DUMP_PACKETS */
65
66/*
67 * how long to wait after some USB errors, so that hub_wq can disconnect() us
68 * without too many spurious errors
69 */
70#define ERROR_DELAY_JIFFIES (HZ / 10)
71
72#define OUTPUT_URBS 7
73#define INPUT_URBS 7
74
75
76MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
77MODULE_DESCRIPTION("USB Audio/MIDI helper module");
78MODULE_LICENSE("Dual BSD/GPL");
79
80
81struct usb_ms_header_descriptor {
82 __u8 bLength;
83 __u8 bDescriptorType;
84 __u8 bDescriptorSubtype;
85 __u8 bcdMSC[2];
86 __le16 wTotalLength;
87} __attribute__ ((packed));
88
89struct usb_ms_endpoint_descriptor {
90 __u8 bLength;
91 __u8 bDescriptorType;
92 __u8 bDescriptorSubtype;
93 __u8 bNumEmbMIDIJack;
94 __u8 baAssocJackID[];
95} __attribute__ ((packed));
96
97struct snd_usb_midi_in_endpoint;
98struct snd_usb_midi_out_endpoint;
99struct snd_usb_midi_endpoint;
100
101struct usb_protocol_ops {
102 void (*input)(struct snd_usb_midi_in_endpoint*, uint8_t*, int);
103 void (*output)(struct snd_usb_midi_out_endpoint *ep, struct urb *urb);
104 void (*output_packet)(struct urb*, uint8_t, uint8_t, uint8_t, uint8_t);
105 void (*init_out_endpoint)(struct snd_usb_midi_out_endpoint *);
106 void (*finish_out_endpoint)(struct snd_usb_midi_out_endpoint *);
107};
108
109struct snd_usb_midi {
110 struct usb_device *dev;
111 struct snd_card *card;
112 struct usb_interface *iface;
113 const struct snd_usb_audio_quirk *quirk;
114 struct snd_rawmidi *rmidi;
115 const struct usb_protocol_ops *usb_protocol_ops;
116 struct list_head list;
117 struct timer_list error_timer;
118 spinlock_t disc_lock;
119 struct rw_semaphore disc_rwsem;
120 struct mutex mutex;
121 u32 usb_id;
122 int next_midi_device;
123
124 struct snd_usb_midi_endpoint {
125 struct snd_usb_midi_out_endpoint *out;
126 struct snd_usb_midi_in_endpoint *in;
127 } endpoints[MIDI_MAX_ENDPOINTS];
128 unsigned long input_triggered;
129 unsigned int opened[2];
130 unsigned char disconnected;
131 unsigned char input_running;
132
133 struct snd_kcontrol *roland_load_ctl;
134};
135
136struct snd_usb_midi_out_endpoint {
137 struct snd_usb_midi *umidi;
138 struct out_urb_context {
139 struct urb *urb;
140 struct snd_usb_midi_out_endpoint *ep;
141 } urbs[OUTPUT_URBS];
142 unsigned int active_urbs;
143 unsigned int drain_urbs;
144 int max_transfer; /* size of urb buffer */
145 struct tasklet_struct tasklet;
146 unsigned int next_urb;
147 spinlock_t buffer_lock;
148
149 struct usbmidi_out_port {
150 struct snd_usb_midi_out_endpoint *ep;
151 struct snd_rawmidi_substream *substream;
152 int active;
153 uint8_t cable; /* cable number << 4 */
154 uint8_t state;
155#define STATE_UNKNOWN 0
156#define STATE_1PARAM 1
157#define STATE_2PARAM_1 2
158#define STATE_2PARAM_2 3
159#define STATE_SYSEX_0 4
160#define STATE_SYSEX_1 5
161#define STATE_SYSEX_2 6
162 uint8_t data[2];
163 } ports[0x10];
164 int current_port;
165
166 wait_queue_head_t drain_wait;
167};
168
169struct snd_usb_midi_in_endpoint {
170 struct snd_usb_midi *umidi;
171 struct urb *urbs[INPUT_URBS];
172 struct usbmidi_in_port {
173 struct snd_rawmidi_substream *substream;
174 u8 running_status_length;
175 } ports[0x10];
176 u8 seen_f5;
177 bool in_sysex;
178 u8 last_cin;
179 u8 error_resubmit;
180 int current_port;
181};
182
183static void snd_usbmidi_do_output(struct snd_usb_midi_out_endpoint *ep);
184
185static const uint8_t snd_usbmidi_cin_length[] = {
186 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1
187};
188
189/*
190 * Submits the URB, with error handling.
191 */
192static int snd_usbmidi_submit_urb(struct urb *urb, gfp_t flags)
193{
194 int err = usb_submit_urb(urb, flags);
195 if (err < 0 && err != -ENODEV)
196 dev_err(&urb->dev->dev, "usb_submit_urb: %d\n", err);
197 return err;
198}
199
200/*
201 * Error handling for URB completion functions.
202 */
203static int snd_usbmidi_urb_error(const struct urb *urb)
204{
205 switch (urb->status) {
206 /* manually unlinked, or device gone */
207 case -ENOENT:
208 case -ECONNRESET:
209 case -ESHUTDOWN:
210 case -ENODEV:
211 return -ENODEV;
212 /* errors that might occur during unplugging */
213 case -EPROTO:
214 case -ETIME:
215 case -EILSEQ:
216 return -EIO;
217 default:
218 dev_err(&urb->dev->dev, "urb status %d\n", urb->status);
219 return 0; /* continue */
220 }
221}
222
223/*
224 * Receives a chunk of MIDI data.
225 */
226static void snd_usbmidi_input_data(struct snd_usb_midi_in_endpoint *ep,
227 int portidx, uint8_t *data, int length)
228{
229 struct usbmidi_in_port *port = &ep->ports[portidx];
230
231 if (!port->substream) {
232 dev_dbg(&ep->umidi->dev->dev, "unexpected port %d!\n", portidx);
233 return;
234 }
235 if (!test_bit(port->substream->number, &ep->umidi->input_triggered))
236 return;
237 snd_rawmidi_receive(port->substream, data, length);
238}
239
240#ifdef DUMP_PACKETS
241static void dump_urb(const char *type, const u8 *data, int length)
242{
243 snd_printk(KERN_DEBUG "%s packet: [", type);
244 for (; length > 0; ++data, --length)
245 printk(KERN_CONT " %02x", *data);
246 printk(KERN_CONT " ]\n");
247}
248#else
249#define dump_urb(type, data, length) /* nothing */
250#endif
251
252/*
253 * Processes the data read from the device.
254 */
255static void snd_usbmidi_in_urb_complete(struct urb *urb)
256{
257 struct snd_usb_midi_in_endpoint *ep = urb->context;
258
259 if (urb->status == 0) {
260 dump_urb("received", urb->transfer_buffer, urb->actual_length);
261 ep->umidi->usb_protocol_ops->input(ep, urb->transfer_buffer,
262 urb->actual_length);
263 } else {
264 int err = snd_usbmidi_urb_error(urb);
265 if (err < 0) {
266 if (err != -ENODEV) {
267 ep->error_resubmit = 1;
268 mod_timer(&ep->umidi->error_timer,
269 jiffies + ERROR_DELAY_JIFFIES);
270 }
271 return;
272 }
273 }
274
275 urb->dev = ep->umidi->dev;
276 snd_usbmidi_submit_urb(urb, GFP_ATOMIC);
277}
278
279static void snd_usbmidi_out_urb_complete(struct urb *urb)
280{
281 struct out_urb_context *context = urb->context;
282 struct snd_usb_midi_out_endpoint *ep = context->ep;
283 unsigned int urb_index;
284 unsigned long flags;
285
286 spin_lock_irqsave(&ep->buffer_lock, flags);
287 urb_index = context - ep->urbs;
288 ep->active_urbs &= ~(1 << urb_index);
289 if (unlikely(ep->drain_urbs)) {
290 ep->drain_urbs &= ~(1 << urb_index);
291 wake_up(&ep->drain_wait);
292 }
293 spin_unlock_irqrestore(&ep->buffer_lock, flags);
294 if (urb->status < 0) {
295 int err = snd_usbmidi_urb_error(urb);
296 if (err < 0) {
297 if (err != -ENODEV)
298 mod_timer(&ep->umidi->error_timer,
299 jiffies + ERROR_DELAY_JIFFIES);
300 return;
301 }
302 }
303 snd_usbmidi_do_output(ep);
304}
305
306/*
307 * This is called when some data should be transferred to the device
308 * (from one or more substreams).
309 */
310static void snd_usbmidi_do_output(struct snd_usb_midi_out_endpoint *ep)
311{
312 unsigned int urb_index;
313 struct urb *urb;
314 unsigned long flags;
315
316 spin_lock_irqsave(&ep->buffer_lock, flags);
317 if (ep->umidi->disconnected) {
318 spin_unlock_irqrestore(&ep->buffer_lock, flags);
319 return;
320 }
321
322 urb_index = ep->next_urb;
323 for (;;) {
324 if (!(ep->active_urbs & (1 << urb_index))) {
325 urb = ep->urbs[urb_index].urb;
326 urb->transfer_buffer_length = 0;
327 ep->umidi->usb_protocol_ops->output(ep, urb);
328 if (urb->transfer_buffer_length == 0)
329 break;
330
331 dump_urb("sending", urb->transfer_buffer,
332 urb->transfer_buffer_length);
333 urb->dev = ep->umidi->dev;
334 if (snd_usbmidi_submit_urb(urb, GFP_ATOMIC) < 0)
335 break;
336 ep->active_urbs |= 1 << urb_index;
337 }
338 if (++urb_index >= OUTPUT_URBS)
339 urb_index = 0;
340 if (urb_index == ep->next_urb)
341 break;
342 }
343 ep->next_urb = urb_index;
344 spin_unlock_irqrestore(&ep->buffer_lock, flags);
345}
346
347static void snd_usbmidi_out_tasklet(struct tasklet_struct *t)
348{
349 struct snd_usb_midi_out_endpoint *ep = from_tasklet(ep, t, tasklet);
350
351 snd_usbmidi_do_output(ep);
352}
353
354/* called after transfers had been interrupted due to some USB error */
355static void snd_usbmidi_error_timer(struct timer_list *t)
356{
357 struct snd_usb_midi *umidi = from_timer(umidi, t, error_timer);
358 unsigned int i, j;
359
360 spin_lock(&umidi->disc_lock);
361 if (umidi->disconnected) {
362 spin_unlock(&umidi->disc_lock);
363 return;
364 }
365 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
366 struct snd_usb_midi_in_endpoint *in = umidi->endpoints[i].in;
367 if (in && in->error_resubmit) {
368 in->error_resubmit = 0;
369 for (j = 0; j < INPUT_URBS; ++j) {
370 if (atomic_read(&in->urbs[j]->use_count))
371 continue;
372 in->urbs[j]->dev = umidi->dev;
373 snd_usbmidi_submit_urb(in->urbs[j], GFP_ATOMIC);
374 }
375 }
376 if (umidi->endpoints[i].out)
377 snd_usbmidi_do_output(umidi->endpoints[i].out);
378 }
379 spin_unlock(&umidi->disc_lock);
380}
381
382/* helper function to send static data that may not DMA-able */
383static int send_bulk_static_data(struct snd_usb_midi_out_endpoint *ep,
384 const void *data, int len)
385{
386 int err = 0;
387 void *buf = kmemdup(data, len, GFP_KERNEL);
388 if (!buf)
389 return -ENOMEM;
390 dump_urb("sending", buf, len);
391 if (ep->urbs[0].urb)
392 err = usb_bulk_msg(ep->umidi->dev, ep->urbs[0].urb->pipe,
393 buf, len, NULL, 250);
394 kfree(buf);
395 return err;
396}
397
398/*
399 * Standard USB MIDI protocol: see the spec.
400 * Midiman protocol: like the standard protocol, but the control byte is the
401 * fourth byte in each packet, and uses length instead of CIN.
402 */
403
404static void snd_usbmidi_standard_input(struct snd_usb_midi_in_endpoint *ep,
405 uint8_t *buffer, int buffer_length)
406{
407 int i;
408
409 for (i = 0; i + 3 < buffer_length; i += 4)
410 if (buffer[i] != 0) {
411 int cable = buffer[i] >> 4;
412 int length = snd_usbmidi_cin_length[buffer[i] & 0x0f];
413 snd_usbmidi_input_data(ep, cable, &buffer[i + 1],
414 length);
415 }
416}
417
418static void snd_usbmidi_midiman_input(struct snd_usb_midi_in_endpoint *ep,
419 uint8_t *buffer, int buffer_length)
420{
421 int i;
422
423 for (i = 0; i + 3 < buffer_length; i += 4)
424 if (buffer[i + 3] != 0) {
425 int port = buffer[i + 3] >> 4;
426 int length = buffer[i + 3] & 3;
427 snd_usbmidi_input_data(ep, port, &buffer[i], length);
428 }
429}
430
431/*
432 * Buggy M-Audio device: running status on input results in a packet that has
433 * the data bytes but not the status byte and that is marked with CIN 4.
434 */
435static void snd_usbmidi_maudio_broken_running_status_input(
436 struct snd_usb_midi_in_endpoint *ep,
437 uint8_t *buffer, int buffer_length)
438{
439 int i;
440
441 for (i = 0; i + 3 < buffer_length; i += 4)
442 if (buffer[i] != 0) {
443 int cable = buffer[i] >> 4;
444 u8 cin = buffer[i] & 0x0f;
445 struct usbmidi_in_port *port = &ep->ports[cable];
446 int length;
447
448 length = snd_usbmidi_cin_length[cin];
449 if (cin == 0xf && buffer[i + 1] >= 0xf8)
450 ; /* realtime msg: no running status change */
451 else if (cin >= 0x8 && cin <= 0xe)
452 /* channel msg */
453 port->running_status_length = length - 1;
454 else if (cin == 0x4 &&
455 port->running_status_length != 0 &&
456 buffer[i + 1] < 0x80)
457 /* CIN 4 that is not a SysEx */
458 length = port->running_status_length;
459 else
460 /*
461 * All other msgs cannot begin running status.
462 * (A channel msg sent as two or three CIN 0xF
463 * packets could in theory, but this device
464 * doesn't use this format.)
465 */
466 port->running_status_length = 0;
467 snd_usbmidi_input_data(ep, cable, &buffer[i + 1],
468 length);
469 }
470}
471
472/*
473 * QinHeng CH345 is buggy: every second packet inside a SysEx has not CIN 4
474 * but the previously seen CIN, but still with three data bytes.
475 */
476static void ch345_broken_sysex_input(struct snd_usb_midi_in_endpoint *ep,
477 uint8_t *buffer, int buffer_length)
478{
479 unsigned int i, cin, length;
480
481 for (i = 0; i + 3 < buffer_length; i += 4) {
482 if (buffer[i] == 0 && i > 0)
483 break;
484 cin = buffer[i] & 0x0f;
485 if (ep->in_sysex &&
486 cin == ep->last_cin &&
487 (buffer[i + 1 + (cin == 0x6)] & 0x80) == 0)
488 cin = 0x4;
489#if 0
490 if (buffer[i + 1] == 0x90) {
491 /*
492 * Either a corrupted running status or a real note-on
493 * message; impossible to detect reliably.
494 */
495 }
496#endif
497 length = snd_usbmidi_cin_length[cin];
498 snd_usbmidi_input_data(ep, 0, &buffer[i + 1], length);
499 ep->in_sysex = cin == 0x4;
500 if (!ep->in_sysex)
501 ep->last_cin = cin;
502 }
503}
504
505/*
506 * CME protocol: like the standard protocol, but SysEx commands are sent as a
507 * single USB packet preceded by a 0x0F byte.
508 */
509static void snd_usbmidi_cme_input(struct snd_usb_midi_in_endpoint *ep,
510 uint8_t *buffer, int buffer_length)
511{
512 if (buffer_length < 2 || (buffer[0] & 0x0f) != 0x0f)
513 snd_usbmidi_standard_input(ep, buffer, buffer_length);
514 else
515 snd_usbmidi_input_data(ep, buffer[0] >> 4,
516 &buffer[1], buffer_length - 1);
517}
518
519/*
520 * Adds one USB MIDI packet to the output buffer.
521 */
522static void snd_usbmidi_output_standard_packet(struct urb *urb, uint8_t p0,
523 uint8_t p1, uint8_t p2,
524 uint8_t p3)
525{
526
527 uint8_t *buf =
528 (uint8_t *)urb->transfer_buffer + urb->transfer_buffer_length;
529 buf[0] = p0;
530 buf[1] = p1;
531 buf[2] = p2;
532 buf[3] = p3;
533 urb->transfer_buffer_length += 4;
534}
535
536/*
537 * Adds one Midiman packet to the output buffer.
538 */
539static void snd_usbmidi_output_midiman_packet(struct urb *urb, uint8_t p0,
540 uint8_t p1, uint8_t p2,
541 uint8_t p3)
542{
543
544 uint8_t *buf =
545 (uint8_t *)urb->transfer_buffer + urb->transfer_buffer_length;
546 buf[0] = p1;
547 buf[1] = p2;
548 buf[2] = p3;
549 buf[3] = (p0 & 0xf0) | snd_usbmidi_cin_length[p0 & 0x0f];
550 urb->transfer_buffer_length += 4;
551}
552
553/*
554 * Converts MIDI commands to USB MIDI packets.
555 */
556static void snd_usbmidi_transmit_byte(struct usbmidi_out_port *port,
557 uint8_t b, struct urb *urb)
558{
559 uint8_t p0 = port->cable;
560 void (*output_packet)(struct urb*, uint8_t, uint8_t, uint8_t, uint8_t) =
561 port->ep->umidi->usb_protocol_ops->output_packet;
562
563 if (b >= 0xf8) {
564 output_packet(urb, p0 | 0x0f, b, 0, 0);
565 } else if (b >= 0xf0) {
566 switch (b) {
567 case 0xf0:
568 port->data[0] = b;
569 port->state = STATE_SYSEX_1;
570 break;
571 case 0xf1:
572 case 0xf3:
573 port->data[0] = b;
574 port->state = STATE_1PARAM;
575 break;
576 case 0xf2:
577 port->data[0] = b;
578 port->state = STATE_2PARAM_1;
579 break;
580 case 0xf4:
581 case 0xf5:
582 port->state = STATE_UNKNOWN;
583 break;
584 case 0xf6:
585 output_packet(urb, p0 | 0x05, 0xf6, 0, 0);
586 port->state = STATE_UNKNOWN;
587 break;
588 case 0xf7:
589 switch (port->state) {
590 case STATE_SYSEX_0:
591 output_packet(urb, p0 | 0x05, 0xf7, 0, 0);
592 break;
593 case STATE_SYSEX_1:
594 output_packet(urb, p0 | 0x06, port->data[0],
595 0xf7, 0);
596 break;
597 case STATE_SYSEX_2:
598 output_packet(urb, p0 | 0x07, port->data[0],
599 port->data[1], 0xf7);
600 break;
601 }
602 port->state = STATE_UNKNOWN;
603 break;
604 }
605 } else if (b >= 0x80) {
606 port->data[0] = b;
607 if (b >= 0xc0 && b <= 0xdf)
608 port->state = STATE_1PARAM;
609 else
610 port->state = STATE_2PARAM_1;
611 } else { /* b < 0x80 */
612 switch (port->state) {
613 case STATE_1PARAM:
614 if (port->data[0] < 0xf0) {
615 p0 |= port->data[0] >> 4;
616 } else {
617 p0 |= 0x02;
618 port->state = STATE_UNKNOWN;
619 }
620 output_packet(urb, p0, port->data[0], b, 0);
621 break;
622 case STATE_2PARAM_1:
623 port->data[1] = b;
624 port->state = STATE_2PARAM_2;
625 break;
626 case STATE_2PARAM_2:
627 if (port->data[0] < 0xf0) {
628 p0 |= port->data[0] >> 4;
629 port->state = STATE_2PARAM_1;
630 } else {
631 p0 |= 0x03;
632 port->state = STATE_UNKNOWN;
633 }
634 output_packet(urb, p0, port->data[0], port->data[1], b);
635 break;
636 case STATE_SYSEX_0:
637 port->data[0] = b;
638 port->state = STATE_SYSEX_1;
639 break;
640 case STATE_SYSEX_1:
641 port->data[1] = b;
642 port->state = STATE_SYSEX_2;
643 break;
644 case STATE_SYSEX_2:
645 output_packet(urb, p0 | 0x04, port->data[0],
646 port->data[1], b);
647 port->state = STATE_SYSEX_0;
648 break;
649 }
650 }
651}
652
653static void snd_usbmidi_standard_output(struct snd_usb_midi_out_endpoint *ep,
654 struct urb *urb)
655{
656 int p;
657
658 /* FIXME: lower-numbered ports can starve higher-numbered ports */
659 for (p = 0; p < 0x10; ++p) {
660 struct usbmidi_out_port *port = &ep->ports[p];
661 if (!port->active)
662 continue;
663 while (urb->transfer_buffer_length + 3 < ep->max_transfer) {
664 uint8_t b;
665 if (snd_rawmidi_transmit(port->substream, &b, 1) != 1) {
666 port->active = 0;
667 break;
668 }
669 snd_usbmidi_transmit_byte(port, b, urb);
670 }
671 }
672}
673
674static const struct usb_protocol_ops snd_usbmidi_standard_ops = {
675 .input = snd_usbmidi_standard_input,
676 .output = snd_usbmidi_standard_output,
677 .output_packet = snd_usbmidi_output_standard_packet,
678};
679
680static const struct usb_protocol_ops snd_usbmidi_midiman_ops = {
681 .input = snd_usbmidi_midiman_input,
682 .output = snd_usbmidi_standard_output,
683 .output_packet = snd_usbmidi_output_midiman_packet,
684};
685
686static const
687struct usb_protocol_ops snd_usbmidi_maudio_broken_running_status_ops = {
688 .input = snd_usbmidi_maudio_broken_running_status_input,
689 .output = snd_usbmidi_standard_output,
690 .output_packet = snd_usbmidi_output_standard_packet,
691};
692
693static const struct usb_protocol_ops snd_usbmidi_cme_ops = {
694 .input = snd_usbmidi_cme_input,
695 .output = snd_usbmidi_standard_output,
696 .output_packet = snd_usbmidi_output_standard_packet,
697};
698
699static const struct usb_protocol_ops snd_usbmidi_ch345_broken_sysex_ops = {
700 .input = ch345_broken_sysex_input,
701 .output = snd_usbmidi_standard_output,
702 .output_packet = snd_usbmidi_output_standard_packet,
703};
704
705/*
706 * AKAI MPD16 protocol:
707 *
708 * For control port (endpoint 1):
709 * ==============================
710 * One or more chunks consisting of first byte of (0x10 | msg_len) and then a
711 * SysEx message (msg_len=9 bytes long).
712 *
713 * For data port (endpoint 2):
714 * ===========================
715 * One or more chunks consisting of first byte of (0x20 | msg_len) and then a
716 * MIDI message (msg_len bytes long)
717 *
718 * Messages sent: Active Sense, Note On, Poly Pressure, Control Change.
719 */
720static void snd_usbmidi_akai_input(struct snd_usb_midi_in_endpoint *ep,
721 uint8_t *buffer, int buffer_length)
722{
723 unsigned int pos = 0;
724 unsigned int len = (unsigned int)buffer_length;
725 while (pos < len) {
726 unsigned int port = (buffer[pos] >> 4) - 1;
727 unsigned int msg_len = buffer[pos] & 0x0f;
728 pos++;
729 if (pos + msg_len <= len && port < 2)
730 snd_usbmidi_input_data(ep, 0, &buffer[pos], msg_len);
731 pos += msg_len;
732 }
733}
734
735#define MAX_AKAI_SYSEX_LEN 9
736
737static void snd_usbmidi_akai_output(struct snd_usb_midi_out_endpoint *ep,
738 struct urb *urb)
739{
740 uint8_t *msg;
741 int pos, end, count, buf_end;
742 uint8_t tmp[MAX_AKAI_SYSEX_LEN];
743 struct snd_rawmidi_substream *substream = ep->ports[0].substream;
744
745 if (!ep->ports[0].active)
746 return;
747
748 msg = urb->transfer_buffer + urb->transfer_buffer_length;
749 buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1;
750
751 /* only try adding more data when there's space for at least 1 SysEx */
752 while (urb->transfer_buffer_length < buf_end) {
753 count = snd_rawmidi_transmit_peek(substream,
754 tmp, MAX_AKAI_SYSEX_LEN);
755 if (!count) {
756 ep->ports[0].active = 0;
757 return;
758 }
759 /* try to skip non-SysEx data */
760 for (pos = 0; pos < count && tmp[pos] != 0xF0; pos++)
761 ;
762
763 if (pos > 0) {
764 snd_rawmidi_transmit_ack(substream, pos);
765 continue;
766 }
767
768 /* look for the start or end marker */
769 for (end = 1; end < count && tmp[end] < 0xF0; end++)
770 ;
771
772 /* next SysEx started before the end of current one */
773 if (end < count && tmp[end] == 0xF0) {
774 /* it's incomplete - drop it */
775 snd_rawmidi_transmit_ack(substream, end);
776 continue;
777 }
778 /* SysEx complete */
779 if (end < count && tmp[end] == 0xF7) {
780 /* queue it, ack it, and get the next one */
781 count = end + 1;
782 msg[0] = 0x10 | count;
783 memcpy(&msg[1], tmp, count);
784 snd_rawmidi_transmit_ack(substream, count);
785 urb->transfer_buffer_length += count + 1;
786 msg += count + 1;
787 continue;
788 }
789 /* less than 9 bytes and no end byte - wait for more */
790 if (count < MAX_AKAI_SYSEX_LEN) {
791 ep->ports[0].active = 0;
792 return;
793 }
794 /* 9 bytes and no end marker in sight - malformed, skip it */
795 snd_rawmidi_transmit_ack(substream, count);
796 }
797}
798
799static const struct usb_protocol_ops snd_usbmidi_akai_ops = {
800 .input = snd_usbmidi_akai_input,
801 .output = snd_usbmidi_akai_output,
802};
803
804/*
805 * Novation USB MIDI protocol: number of data bytes is in the first byte
806 * (when receiving) (+1!) or in the second byte (when sending); data begins
807 * at the third byte.
808 */
809
810static void snd_usbmidi_novation_input(struct snd_usb_midi_in_endpoint *ep,
811 uint8_t *buffer, int buffer_length)
812{
813 if (buffer_length < 2 || !buffer[0] || buffer_length < buffer[0] + 1)
814 return;
815 snd_usbmidi_input_data(ep, 0, &buffer[2], buffer[0] - 1);
816}
817
818static void snd_usbmidi_novation_output(struct snd_usb_midi_out_endpoint *ep,
819 struct urb *urb)
820{
821 uint8_t *transfer_buffer;
822 int count;
823
824 if (!ep->ports[0].active)
825 return;
826 transfer_buffer = urb->transfer_buffer;
827 count = snd_rawmidi_transmit(ep->ports[0].substream,
828 &transfer_buffer[2],
829 ep->max_transfer - 2);
830 if (count < 1) {
831 ep->ports[0].active = 0;
832 return;
833 }
834 transfer_buffer[0] = 0;
835 transfer_buffer[1] = count;
836 urb->transfer_buffer_length = 2 + count;
837}
838
839static const struct usb_protocol_ops snd_usbmidi_novation_ops = {
840 .input = snd_usbmidi_novation_input,
841 .output = snd_usbmidi_novation_output,
842};
843
844/*
845 * "raw" protocol: just move raw MIDI bytes from/to the endpoint
846 */
847
848static void snd_usbmidi_raw_input(struct snd_usb_midi_in_endpoint *ep,
849 uint8_t *buffer, int buffer_length)
850{
851 snd_usbmidi_input_data(ep, 0, buffer, buffer_length);
852}
853
854static void snd_usbmidi_raw_output(struct snd_usb_midi_out_endpoint *ep,
855 struct urb *urb)
856{
857 int count;
858
859 if (!ep->ports[0].active)
860 return;
861 count = snd_rawmidi_transmit(ep->ports[0].substream,
862 urb->transfer_buffer,
863 ep->max_transfer);
864 if (count < 1) {
865 ep->ports[0].active = 0;
866 return;
867 }
868 urb->transfer_buffer_length = count;
869}
870
871static const struct usb_protocol_ops snd_usbmidi_raw_ops = {
872 .input = snd_usbmidi_raw_input,
873 .output = snd_usbmidi_raw_output,
874};
875
876/*
877 * FTDI protocol: raw MIDI bytes, but input packets have two modem status bytes.
878 */
879
880static void snd_usbmidi_ftdi_input(struct snd_usb_midi_in_endpoint *ep,
881 uint8_t *buffer, int buffer_length)
882{
883 if (buffer_length > 2)
884 snd_usbmidi_input_data(ep, 0, buffer + 2, buffer_length - 2);
885}
886
887static const struct usb_protocol_ops snd_usbmidi_ftdi_ops = {
888 .input = snd_usbmidi_ftdi_input,
889 .output = snd_usbmidi_raw_output,
890};
891
892static void snd_usbmidi_us122l_input(struct snd_usb_midi_in_endpoint *ep,
893 uint8_t *buffer, int buffer_length)
894{
895 if (buffer_length != 9)
896 return;
897 buffer_length = 8;
898 while (buffer_length && buffer[buffer_length - 1] == 0xFD)
899 buffer_length--;
900 if (buffer_length)
901 snd_usbmidi_input_data(ep, 0, buffer, buffer_length);
902}
903
904static void snd_usbmidi_us122l_output(struct snd_usb_midi_out_endpoint *ep,
905 struct urb *urb)
906{
907 int count;
908
909 if (!ep->ports[0].active)
910 return;
911 switch (snd_usb_get_speed(ep->umidi->dev)) {
912 case USB_SPEED_HIGH:
913 case USB_SPEED_SUPER:
914 case USB_SPEED_SUPER_PLUS:
915 count = 1;
916 break;
917 default:
918 count = 2;
919 }
920 count = snd_rawmidi_transmit(ep->ports[0].substream,
921 urb->transfer_buffer,
922 count);
923 if (count < 1) {
924 ep->ports[0].active = 0;
925 return;
926 }
927
928 memset(urb->transfer_buffer + count, 0xFD, ep->max_transfer - count);
929 urb->transfer_buffer_length = ep->max_transfer;
930}
931
932static const struct usb_protocol_ops snd_usbmidi_122l_ops = {
933 .input = snd_usbmidi_us122l_input,
934 .output = snd_usbmidi_us122l_output,
935};
936
937/*
938 * Emagic USB MIDI protocol: raw MIDI with "F5 xx" port switching.
939 */
940
941static void snd_usbmidi_emagic_init_out(struct snd_usb_midi_out_endpoint *ep)
942{
943 static const u8 init_data[] = {
944 /* initialization magic: "get version" */
945 0xf0,
946 0x00, 0x20, 0x31, /* Emagic */
947 0x64, /* Unitor8 */
948 0x0b, /* version number request */
949 0x00, /* command version */
950 0x00, /* EEPROM, box 0 */
951 0xf7
952 };
953 send_bulk_static_data(ep, init_data, sizeof(init_data));
954 /* while we're at it, pour on more magic */
955 send_bulk_static_data(ep, init_data, sizeof(init_data));
956}
957
958static void snd_usbmidi_emagic_finish_out(struct snd_usb_midi_out_endpoint *ep)
959{
960 static const u8 finish_data[] = {
961 /* switch to patch mode with last preset */
962 0xf0,
963 0x00, 0x20, 0x31, /* Emagic */
964 0x64, /* Unitor8 */
965 0x10, /* patch switch command */
966 0x00, /* command version */
967 0x7f, /* to all boxes */
968 0x40, /* last preset in EEPROM */
969 0xf7
970 };
971 send_bulk_static_data(ep, finish_data, sizeof(finish_data));
972}
973
974static void snd_usbmidi_emagic_input(struct snd_usb_midi_in_endpoint *ep,
975 uint8_t *buffer, int buffer_length)
976{
977 int i;
978
979 /* FF indicates end of valid data */
980 for (i = 0; i < buffer_length; ++i)
981 if (buffer[i] == 0xff) {
982 buffer_length = i;
983 break;
984 }
985
986 /* handle F5 at end of last buffer */
987 if (ep->seen_f5)
988 goto switch_port;
989
990 while (buffer_length > 0) {
991 /* determine size of data until next F5 */
992 for (i = 0; i < buffer_length; ++i)
993 if (buffer[i] == 0xf5)
994 break;
995 snd_usbmidi_input_data(ep, ep->current_port, buffer, i);
996 buffer += i;
997 buffer_length -= i;
998
999 if (buffer_length <= 0)
1000 break;
1001 /* assert(buffer[0] == 0xf5); */
1002 ep->seen_f5 = 1;
1003 ++buffer;
1004 --buffer_length;
1005
1006 switch_port:
1007 if (buffer_length <= 0)
1008 break;
1009 if (buffer[0] < 0x80) {
1010 ep->current_port = (buffer[0] - 1) & 15;
1011 ++buffer;
1012 --buffer_length;
1013 }
1014 ep->seen_f5 = 0;
1015 }
1016}
1017
1018static void snd_usbmidi_emagic_output(struct snd_usb_midi_out_endpoint *ep,
1019 struct urb *urb)
1020{
1021 int port0 = ep->current_port;
1022 uint8_t *buf = urb->transfer_buffer;
1023 int buf_free = ep->max_transfer;
1024 int length, i;
1025
1026 for (i = 0; i < 0x10; ++i) {
1027 /* round-robin, starting at the last current port */
1028 int portnum = (port0 + i) & 15;
1029 struct usbmidi_out_port *port = &ep->ports[portnum];
1030
1031 if (!port->active)
1032 continue;
1033 if (snd_rawmidi_transmit_peek(port->substream, buf, 1) != 1) {
1034 port->active = 0;
1035 continue;
1036 }
1037
1038 if (portnum != ep->current_port) {
1039 if (buf_free < 2)
1040 break;
1041 ep->current_port = portnum;
1042 buf[0] = 0xf5;
1043 buf[1] = (portnum + 1) & 15;
1044 buf += 2;
1045 buf_free -= 2;
1046 }
1047
1048 if (buf_free < 1)
1049 break;
1050 length = snd_rawmidi_transmit(port->substream, buf, buf_free);
1051 if (length > 0) {
1052 buf += length;
1053 buf_free -= length;
1054 if (buf_free < 1)
1055 break;
1056 }
1057 }
1058 if (buf_free < ep->max_transfer && buf_free > 0) {
1059 *buf = 0xff;
1060 --buf_free;
1061 }
1062 urb->transfer_buffer_length = ep->max_transfer - buf_free;
1063}
1064
1065static const struct usb_protocol_ops snd_usbmidi_emagic_ops = {
1066 .input = snd_usbmidi_emagic_input,
1067 .output = snd_usbmidi_emagic_output,
1068 .init_out_endpoint = snd_usbmidi_emagic_init_out,
1069 .finish_out_endpoint = snd_usbmidi_emagic_finish_out,
1070};
1071
1072
1073static void update_roland_altsetting(struct snd_usb_midi *umidi)
1074{
1075 struct usb_interface *intf;
1076 struct usb_host_interface *hostif;
1077 struct usb_interface_descriptor *intfd;
1078 int is_light_load;
1079
1080 intf = umidi->iface;
1081 is_light_load = intf->cur_altsetting != intf->altsetting;
1082 if (umidi->roland_load_ctl->private_value == is_light_load)
1083 return;
1084 hostif = &intf->altsetting[umidi->roland_load_ctl->private_value];
1085 intfd = get_iface_desc(hostif);
1086 snd_usbmidi_input_stop(&umidi->list);
1087 usb_set_interface(umidi->dev, intfd->bInterfaceNumber,
1088 intfd->bAlternateSetting);
1089 snd_usbmidi_input_start(&umidi->list);
1090}
1091
1092static int substream_open(struct snd_rawmidi_substream *substream, int dir,
1093 int open)
1094{
1095 struct snd_usb_midi *umidi = substream->rmidi->private_data;
1096 struct snd_kcontrol *ctl;
1097
1098 down_read(&umidi->disc_rwsem);
1099 if (umidi->disconnected) {
1100 up_read(&umidi->disc_rwsem);
1101 return open ? -ENODEV : 0;
1102 }
1103
1104 mutex_lock(&umidi->mutex);
1105 if (open) {
1106 if (!umidi->opened[0] && !umidi->opened[1]) {
1107 if (umidi->roland_load_ctl) {
1108 ctl = umidi->roland_load_ctl;
1109 ctl->vd[0].access |=
1110 SNDRV_CTL_ELEM_ACCESS_INACTIVE;
1111 snd_ctl_notify(umidi->card,
1112 SNDRV_CTL_EVENT_MASK_INFO, &ctl->id);
1113 update_roland_altsetting(umidi);
1114 }
1115 }
1116 umidi->opened[dir]++;
1117 if (umidi->opened[1])
1118 snd_usbmidi_input_start(&umidi->list);
1119 } else {
1120 umidi->opened[dir]--;
1121 if (!umidi->opened[1])
1122 snd_usbmidi_input_stop(&umidi->list);
1123 if (!umidi->opened[0] && !umidi->opened[1]) {
1124 if (umidi->roland_load_ctl) {
1125 ctl = umidi->roland_load_ctl;
1126 ctl->vd[0].access &=
1127 ~SNDRV_CTL_ELEM_ACCESS_INACTIVE;
1128 snd_ctl_notify(umidi->card,
1129 SNDRV_CTL_EVENT_MASK_INFO, &ctl->id);
1130 }
1131 }
1132 }
1133 mutex_unlock(&umidi->mutex);
1134 up_read(&umidi->disc_rwsem);
1135 return 0;
1136}
1137
1138static int snd_usbmidi_output_open(struct snd_rawmidi_substream *substream)
1139{
1140 struct snd_usb_midi *umidi = substream->rmidi->private_data;
1141 struct usbmidi_out_port *port = NULL;
1142 int i, j;
1143
1144 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i)
1145 if (umidi->endpoints[i].out)
1146 for (j = 0; j < 0x10; ++j)
1147 if (umidi->endpoints[i].out->ports[j].substream == substream) {
1148 port = &umidi->endpoints[i].out->ports[j];
1149 break;
1150 }
1151 if (!port) {
1152 snd_BUG();
1153 return -ENXIO;
1154 }
1155
1156 substream->runtime->private_data = port;
1157 port->state = STATE_UNKNOWN;
1158 return substream_open(substream, 0, 1);
1159}
1160
1161static int snd_usbmidi_output_close(struct snd_rawmidi_substream *substream)
1162{
1163 return substream_open(substream, 0, 0);
1164}
1165
1166static void snd_usbmidi_output_trigger(struct snd_rawmidi_substream *substream,
1167 int up)
1168{
1169 struct usbmidi_out_port *port =
1170 (struct usbmidi_out_port *)substream->runtime->private_data;
1171
1172 port->active = up;
1173 if (up) {
1174 if (port->ep->umidi->disconnected) {
1175 /* gobble up remaining bytes to prevent wait in
1176 * snd_rawmidi_drain_output */
1177 snd_rawmidi_proceed(substream);
1178 return;
1179 }
1180 tasklet_schedule(&port->ep->tasklet);
1181 }
1182}
1183
1184static void snd_usbmidi_output_drain(struct snd_rawmidi_substream *substream)
1185{
1186 struct usbmidi_out_port *port = substream->runtime->private_data;
1187 struct snd_usb_midi_out_endpoint *ep = port->ep;
1188 unsigned int drain_urbs;
1189 DEFINE_WAIT(wait);
1190 long timeout = msecs_to_jiffies(50);
1191
1192 if (ep->umidi->disconnected)
1193 return;
1194 /*
1195 * The substream buffer is empty, but some data might still be in the
1196 * currently active URBs, so we have to wait for those to complete.
1197 */
1198 spin_lock_irq(&ep->buffer_lock);
1199 drain_urbs = ep->active_urbs;
1200 if (drain_urbs) {
1201 ep->drain_urbs |= drain_urbs;
1202 do {
1203 prepare_to_wait(&ep->drain_wait, &wait,
1204 TASK_UNINTERRUPTIBLE);
1205 spin_unlock_irq(&ep->buffer_lock);
1206 timeout = schedule_timeout(timeout);
1207 spin_lock_irq(&ep->buffer_lock);
1208 drain_urbs &= ep->drain_urbs;
1209 } while (drain_urbs && timeout);
1210 finish_wait(&ep->drain_wait, &wait);
1211 }
1212 spin_unlock_irq(&ep->buffer_lock);
1213}
1214
1215static int snd_usbmidi_input_open(struct snd_rawmidi_substream *substream)
1216{
1217 return substream_open(substream, 1, 1);
1218}
1219
1220static int snd_usbmidi_input_close(struct snd_rawmidi_substream *substream)
1221{
1222 return substream_open(substream, 1, 0);
1223}
1224
1225static void snd_usbmidi_input_trigger(struct snd_rawmidi_substream *substream,
1226 int up)
1227{
1228 struct snd_usb_midi *umidi = substream->rmidi->private_data;
1229
1230 if (up)
1231 set_bit(substream->number, &umidi->input_triggered);
1232 else
1233 clear_bit(substream->number, &umidi->input_triggered);
1234}
1235
1236static const struct snd_rawmidi_ops snd_usbmidi_output_ops = {
1237 .open = snd_usbmidi_output_open,
1238 .close = snd_usbmidi_output_close,
1239 .trigger = snd_usbmidi_output_trigger,
1240 .drain = snd_usbmidi_output_drain,
1241};
1242
1243static const struct snd_rawmidi_ops snd_usbmidi_input_ops = {
1244 .open = snd_usbmidi_input_open,
1245 .close = snd_usbmidi_input_close,
1246 .trigger = snd_usbmidi_input_trigger
1247};
1248
1249static void free_urb_and_buffer(struct snd_usb_midi *umidi, struct urb *urb,
1250 unsigned int buffer_length)
1251{
1252 usb_free_coherent(umidi->dev, buffer_length,
1253 urb->transfer_buffer, urb->transfer_dma);
1254 usb_free_urb(urb);
1255}
1256
1257/*
1258 * Frees an input endpoint.
1259 * May be called when ep hasn't been initialized completely.
1260 */
1261static void snd_usbmidi_in_endpoint_delete(struct snd_usb_midi_in_endpoint *ep)
1262{
1263 unsigned int i;
1264
1265 for (i = 0; i < INPUT_URBS; ++i)
1266 if (ep->urbs[i])
1267 free_urb_and_buffer(ep->umidi, ep->urbs[i],
1268 ep->urbs[i]->transfer_buffer_length);
1269 kfree(ep);
1270}
1271
1272/*
1273 * Creates an input endpoint.
1274 */
1275static int snd_usbmidi_in_endpoint_create(struct snd_usb_midi *umidi,
1276 struct snd_usb_midi_endpoint_info *ep_info,
1277 struct snd_usb_midi_endpoint *rep)
1278{
1279 struct snd_usb_midi_in_endpoint *ep;
1280 void *buffer;
1281 unsigned int pipe;
1282 int length;
1283 unsigned int i;
1284 int err;
1285
1286 rep->in = NULL;
1287 ep = kzalloc(sizeof(*ep), GFP_KERNEL);
1288 if (!ep)
1289 return -ENOMEM;
1290 ep->umidi = umidi;
1291
1292 for (i = 0; i < INPUT_URBS; ++i) {
1293 ep->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
1294 if (!ep->urbs[i]) {
1295 err = -ENOMEM;
1296 goto error;
1297 }
1298 }
1299 if (ep_info->in_interval)
1300 pipe = usb_rcvintpipe(umidi->dev, ep_info->in_ep);
1301 else
1302 pipe = usb_rcvbulkpipe(umidi->dev, ep_info->in_ep);
1303 length = usb_maxpacket(umidi->dev, pipe, 0);
1304 for (i = 0; i < INPUT_URBS; ++i) {
1305 buffer = usb_alloc_coherent(umidi->dev, length, GFP_KERNEL,
1306 &ep->urbs[i]->transfer_dma);
1307 if (!buffer) {
1308 err = -ENOMEM;
1309 goto error;
1310 }
1311 if (ep_info->in_interval)
1312 usb_fill_int_urb(ep->urbs[i], umidi->dev,
1313 pipe, buffer, length,
1314 snd_usbmidi_in_urb_complete,
1315 ep, ep_info->in_interval);
1316 else
1317 usb_fill_bulk_urb(ep->urbs[i], umidi->dev,
1318 pipe, buffer, length,
1319 snd_usbmidi_in_urb_complete, ep);
1320 ep->urbs[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
1321 err = usb_urb_ep_type_check(ep->urbs[i]);
1322 if (err < 0) {
1323 dev_err(&umidi->dev->dev, "invalid MIDI in EP %x\n",
1324 ep_info->in_ep);
1325 goto error;
1326 }
1327 }
1328
1329 rep->in = ep;
1330 return 0;
1331
1332 error:
1333 snd_usbmidi_in_endpoint_delete(ep);
1334 return -ENOMEM;
1335}
1336
1337/*
1338 * Frees an output endpoint.
1339 * May be called when ep hasn't been initialized completely.
1340 */
1341static void snd_usbmidi_out_endpoint_clear(struct snd_usb_midi_out_endpoint *ep)
1342{
1343 unsigned int i;
1344
1345 for (i = 0; i < OUTPUT_URBS; ++i)
1346 if (ep->urbs[i].urb) {
1347 free_urb_and_buffer(ep->umidi, ep->urbs[i].urb,
1348 ep->max_transfer);
1349 ep->urbs[i].urb = NULL;
1350 }
1351}
1352
1353static void snd_usbmidi_out_endpoint_delete(struct snd_usb_midi_out_endpoint *ep)
1354{
1355 snd_usbmidi_out_endpoint_clear(ep);
1356 kfree(ep);
1357}
1358
1359/*
1360 * Creates an output endpoint, and initializes output ports.
1361 */
1362static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi *umidi,
1363 struct snd_usb_midi_endpoint_info *ep_info,
1364 struct snd_usb_midi_endpoint *rep)
1365{
1366 struct snd_usb_midi_out_endpoint *ep;
1367 unsigned int i;
1368 unsigned int pipe;
1369 void *buffer;
1370 int err;
1371
1372 rep->out = NULL;
1373 ep = kzalloc(sizeof(*ep), GFP_KERNEL);
1374 if (!ep)
1375 return -ENOMEM;
1376 ep->umidi = umidi;
1377
1378 for (i = 0; i < OUTPUT_URBS; ++i) {
1379 ep->urbs[i].urb = usb_alloc_urb(0, GFP_KERNEL);
1380 if (!ep->urbs[i].urb) {
1381 err = -ENOMEM;
1382 goto error;
1383 }
1384 ep->urbs[i].ep = ep;
1385 }
1386 if (ep_info->out_interval)
1387 pipe = usb_sndintpipe(umidi->dev, ep_info->out_ep);
1388 else
1389 pipe = usb_sndbulkpipe(umidi->dev, ep_info->out_ep);
1390 switch (umidi->usb_id) {
1391 default:
1392 ep->max_transfer = usb_maxpacket(umidi->dev, pipe, 1);
1393 break;
1394 /*
1395 * Various chips declare a packet size larger than 4 bytes, but
1396 * do not actually work with larger packets:
1397 */
1398 case USB_ID(0x0a67, 0x5011): /* Medeli DD305 */
1399 case USB_ID(0x0a92, 0x1020): /* ESI M4U */
1400 case USB_ID(0x1430, 0x474b): /* RedOctane GH MIDI INTERFACE */
1401 case USB_ID(0x15ca, 0x0101): /* Textech USB Midi Cable */
1402 case USB_ID(0x15ca, 0x1806): /* Textech USB Midi Cable */
1403 case USB_ID(0x1a86, 0x752d): /* QinHeng CH345 "USB2.0-MIDI" */
1404 case USB_ID(0xfc08, 0x0101): /* Unknown vendor Cable */
1405 ep->max_transfer = 4;
1406 break;
1407 /*
1408 * Some devices only work with 9 bytes packet size:
1409 */
1410 case USB_ID(0x0644, 0x800e): /* Tascam US-122L */
1411 case USB_ID(0x0644, 0x800f): /* Tascam US-144 */
1412 ep->max_transfer = 9;
1413 break;
1414 }
1415 for (i = 0; i < OUTPUT_URBS; ++i) {
1416 buffer = usb_alloc_coherent(umidi->dev,
1417 ep->max_transfer, GFP_KERNEL,
1418 &ep->urbs[i].urb->transfer_dma);
1419 if (!buffer) {
1420 err = -ENOMEM;
1421 goto error;
1422 }
1423 if (ep_info->out_interval)
1424 usb_fill_int_urb(ep->urbs[i].urb, umidi->dev,
1425 pipe, buffer, ep->max_transfer,
1426 snd_usbmidi_out_urb_complete,
1427 &ep->urbs[i], ep_info->out_interval);
1428 else
1429 usb_fill_bulk_urb(ep->urbs[i].urb, umidi->dev,
1430 pipe, buffer, ep->max_transfer,
1431 snd_usbmidi_out_urb_complete,
1432 &ep->urbs[i]);
1433 err = usb_urb_ep_type_check(ep->urbs[i].urb);
1434 if (err < 0) {
1435 dev_err(&umidi->dev->dev, "invalid MIDI out EP %x\n",
1436 ep_info->out_ep);
1437 goto error;
1438 }
1439 ep->urbs[i].urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
1440 }
1441
1442 spin_lock_init(&ep->buffer_lock);
1443 tasklet_setup(&ep->tasklet, snd_usbmidi_out_tasklet);
1444 init_waitqueue_head(&ep->drain_wait);
1445
1446 for (i = 0; i < 0x10; ++i)
1447 if (ep_info->out_cables & (1 << i)) {
1448 ep->ports[i].ep = ep;
1449 ep->ports[i].cable = i << 4;
1450 }
1451
1452 if (umidi->usb_protocol_ops->init_out_endpoint)
1453 umidi->usb_protocol_ops->init_out_endpoint(ep);
1454
1455 rep->out = ep;
1456 return 0;
1457
1458 error:
1459 snd_usbmidi_out_endpoint_delete(ep);
1460 return err;
1461}
1462
1463/*
1464 * Frees everything.
1465 */
1466static void snd_usbmidi_free(struct snd_usb_midi *umidi)
1467{
1468 int i;
1469
1470 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
1471 struct snd_usb_midi_endpoint *ep = &umidi->endpoints[i];
1472 if (ep->out)
1473 snd_usbmidi_out_endpoint_delete(ep->out);
1474 if (ep->in)
1475 snd_usbmidi_in_endpoint_delete(ep->in);
1476 }
1477 mutex_destroy(&umidi->mutex);
1478 kfree(umidi);
1479}
1480
1481/*
1482 * Unlinks all URBs (must be done before the usb_device is deleted).
1483 */
1484void snd_usbmidi_disconnect(struct list_head *p)
1485{
1486 struct snd_usb_midi *umidi;
1487 unsigned int i, j;
1488
1489 umidi = list_entry(p, struct snd_usb_midi, list);
1490 /*
1491 * an URB's completion handler may start the timer and
1492 * a timer may submit an URB. To reliably break the cycle
1493 * a flag under lock must be used
1494 */
1495 down_write(&umidi->disc_rwsem);
1496 spin_lock_irq(&umidi->disc_lock);
1497 umidi->disconnected = 1;
1498 spin_unlock_irq(&umidi->disc_lock);
1499 up_write(&umidi->disc_rwsem);
1500
1501 del_timer_sync(&umidi->error_timer);
1502
1503 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
1504 struct snd_usb_midi_endpoint *ep = &umidi->endpoints[i];
1505 if (ep->out)
1506 tasklet_kill(&ep->out->tasklet);
1507 if (ep->out) {
1508 for (j = 0; j < OUTPUT_URBS; ++j)
1509 usb_kill_urb(ep->out->urbs[j].urb);
1510 if (umidi->usb_protocol_ops->finish_out_endpoint)
1511 umidi->usb_protocol_ops->finish_out_endpoint(ep->out);
1512 ep->out->active_urbs = 0;
1513 if (ep->out->drain_urbs) {
1514 ep->out->drain_urbs = 0;
1515 wake_up(&ep->out->drain_wait);
1516 }
1517 }
1518 if (ep->in)
1519 for (j = 0; j < INPUT_URBS; ++j)
1520 usb_kill_urb(ep->in->urbs[j]);
1521 /* free endpoints here; later call can result in Oops */
1522 if (ep->out)
1523 snd_usbmidi_out_endpoint_clear(ep->out);
1524 if (ep->in) {
1525 snd_usbmidi_in_endpoint_delete(ep->in);
1526 ep->in = NULL;
1527 }
1528 }
1529}
1530EXPORT_SYMBOL(snd_usbmidi_disconnect);
1531
1532static void snd_usbmidi_rawmidi_free(struct snd_rawmidi *rmidi)
1533{
1534 struct snd_usb_midi *umidi = rmidi->private_data;
1535 snd_usbmidi_free(umidi);
1536}
1537
1538static struct snd_rawmidi_substream *snd_usbmidi_find_substream(struct snd_usb_midi *umidi,
1539 int stream,
1540 int number)
1541{
1542 struct snd_rawmidi_substream *substream;
1543
1544 list_for_each_entry(substream, &umidi->rmidi->streams[stream].substreams,
1545 list) {
1546 if (substream->number == number)
1547 return substream;
1548 }
1549 return NULL;
1550}
1551
1552/*
1553 * This list specifies names for ports that do not fit into the standard
1554 * "(product) MIDI (n)" schema because they aren't external MIDI ports,
1555 * such as internal control or synthesizer ports.
1556 */
1557static struct port_info {
1558 u32 id;
1559 short int port;
1560 short int voices;
1561 const char *name;
1562 unsigned int seq_flags;
1563} snd_usbmidi_port_info[] = {
1564#define PORT_INFO(vendor, product, num, name_, voices_, flags) \
1565 { .id = USB_ID(vendor, product), \
1566 .port = num, .voices = voices_, \
1567 .name = name_, .seq_flags = flags }
1568#define EXTERNAL_PORT(vendor, product, num, name) \
1569 PORT_INFO(vendor, product, num, name, 0, \
1570 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \
1571 SNDRV_SEQ_PORT_TYPE_HARDWARE | \
1572 SNDRV_SEQ_PORT_TYPE_PORT)
1573#define CONTROL_PORT(vendor, product, num, name) \
1574 PORT_INFO(vendor, product, num, name, 0, \
1575 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \
1576 SNDRV_SEQ_PORT_TYPE_HARDWARE)
1577#define GM_SYNTH_PORT(vendor, product, num, name, voices) \
1578 PORT_INFO(vendor, product, num, name, voices, \
1579 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \
1580 SNDRV_SEQ_PORT_TYPE_MIDI_GM | \
1581 SNDRV_SEQ_PORT_TYPE_HARDWARE | \
1582 SNDRV_SEQ_PORT_TYPE_SYNTHESIZER)
1583#define ROLAND_SYNTH_PORT(vendor, product, num, name, voices) \
1584 PORT_INFO(vendor, product, num, name, voices, \
1585 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \
1586 SNDRV_SEQ_PORT_TYPE_MIDI_GM | \
1587 SNDRV_SEQ_PORT_TYPE_MIDI_GM2 | \
1588 SNDRV_SEQ_PORT_TYPE_MIDI_GS | \
1589 SNDRV_SEQ_PORT_TYPE_MIDI_XG | \
1590 SNDRV_SEQ_PORT_TYPE_HARDWARE | \
1591 SNDRV_SEQ_PORT_TYPE_SYNTHESIZER)
1592#define SOUNDCANVAS_PORT(vendor, product, num, name, voices) \
1593 PORT_INFO(vendor, product, num, name, voices, \
1594 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \
1595 SNDRV_SEQ_PORT_TYPE_MIDI_GM | \
1596 SNDRV_SEQ_PORT_TYPE_MIDI_GM2 | \
1597 SNDRV_SEQ_PORT_TYPE_MIDI_GS | \
1598 SNDRV_SEQ_PORT_TYPE_MIDI_XG | \
1599 SNDRV_SEQ_PORT_TYPE_MIDI_MT32 | \
1600 SNDRV_SEQ_PORT_TYPE_HARDWARE | \
1601 SNDRV_SEQ_PORT_TYPE_SYNTHESIZER)
1602 /* Yamaha MOTIF XF */
1603 GM_SYNTH_PORT(0x0499, 0x105c, 0, "%s Tone Generator", 128),
1604 CONTROL_PORT(0x0499, 0x105c, 1, "%s Remote Control"),
1605 EXTERNAL_PORT(0x0499, 0x105c, 2, "%s Thru"),
1606 CONTROL_PORT(0x0499, 0x105c, 3, "%s Editor"),
1607 /* Roland UA-100 */
1608 CONTROL_PORT(0x0582, 0x0000, 2, "%s Control"),
1609 /* Roland SC-8850 */
1610 SOUNDCANVAS_PORT(0x0582, 0x0003, 0, "%s Part A", 128),
1611 SOUNDCANVAS_PORT(0x0582, 0x0003, 1, "%s Part B", 128),
1612 SOUNDCANVAS_PORT(0x0582, 0x0003, 2, "%s Part C", 128),
1613 SOUNDCANVAS_PORT(0x0582, 0x0003, 3, "%s Part D", 128),
1614 EXTERNAL_PORT(0x0582, 0x0003, 4, "%s MIDI 1"),
1615 EXTERNAL_PORT(0x0582, 0x0003, 5, "%s MIDI 2"),
1616 /* Roland U-8 */
1617 EXTERNAL_PORT(0x0582, 0x0004, 0, "%s MIDI"),
1618 CONTROL_PORT(0x0582, 0x0004, 1, "%s Control"),
1619 /* Roland SC-8820 */
1620 SOUNDCANVAS_PORT(0x0582, 0x0007, 0, "%s Part A", 64),
1621 SOUNDCANVAS_PORT(0x0582, 0x0007, 1, "%s Part B", 64),
1622 EXTERNAL_PORT(0x0582, 0x0007, 2, "%s MIDI"),
1623 /* Roland SK-500 */
1624 SOUNDCANVAS_PORT(0x0582, 0x000b, 0, "%s Part A", 64),
1625 SOUNDCANVAS_PORT(0x0582, 0x000b, 1, "%s Part B", 64),
1626 EXTERNAL_PORT(0x0582, 0x000b, 2, "%s MIDI"),
1627 /* Roland SC-D70 */
1628 SOUNDCANVAS_PORT(0x0582, 0x000c, 0, "%s Part A", 64),
1629 SOUNDCANVAS_PORT(0x0582, 0x000c, 1, "%s Part B", 64),
1630 EXTERNAL_PORT(0x0582, 0x000c, 2, "%s MIDI"),
1631 /* Edirol UM-880 */
1632 CONTROL_PORT(0x0582, 0x0014, 8, "%s Control"),
1633 /* Edirol SD-90 */
1634 ROLAND_SYNTH_PORT(0x0582, 0x0016, 0, "%s Part A", 128),
1635 ROLAND_SYNTH_PORT(0x0582, 0x0016, 1, "%s Part B", 128),
1636 EXTERNAL_PORT(0x0582, 0x0016, 2, "%s MIDI 1"),
1637 EXTERNAL_PORT(0x0582, 0x0016, 3, "%s MIDI 2"),
1638 /* Edirol UM-550 */
1639 CONTROL_PORT(0x0582, 0x0023, 5, "%s Control"),
1640 /* Edirol SD-20 */
1641 ROLAND_SYNTH_PORT(0x0582, 0x0027, 0, "%s Part A", 64),
1642 ROLAND_SYNTH_PORT(0x0582, 0x0027, 1, "%s Part B", 64),
1643 EXTERNAL_PORT(0x0582, 0x0027, 2, "%s MIDI"),
1644 /* Edirol SD-80 */
1645 ROLAND_SYNTH_PORT(0x0582, 0x0029, 0, "%s Part A", 128),
1646 ROLAND_SYNTH_PORT(0x0582, 0x0029, 1, "%s Part B", 128),
1647 EXTERNAL_PORT(0x0582, 0x0029, 2, "%s MIDI 1"),
1648 EXTERNAL_PORT(0x0582, 0x0029, 3, "%s MIDI 2"),
1649 /* Edirol UA-700 */
1650 EXTERNAL_PORT(0x0582, 0x002b, 0, "%s MIDI"),
1651 CONTROL_PORT(0x0582, 0x002b, 1, "%s Control"),
1652 /* Roland VariOS */
1653 EXTERNAL_PORT(0x0582, 0x002f, 0, "%s MIDI"),
1654 EXTERNAL_PORT(0x0582, 0x002f, 1, "%s External MIDI"),
1655 EXTERNAL_PORT(0x0582, 0x002f, 2, "%s Sync"),
1656 /* Edirol PCR */
1657 EXTERNAL_PORT(0x0582, 0x0033, 0, "%s MIDI"),
1658 EXTERNAL_PORT(0x0582, 0x0033, 1, "%s 1"),
1659 EXTERNAL_PORT(0x0582, 0x0033, 2, "%s 2"),
1660 /* BOSS GS-10 */
1661 EXTERNAL_PORT(0x0582, 0x003b, 0, "%s MIDI"),
1662 CONTROL_PORT(0x0582, 0x003b, 1, "%s Control"),
1663 /* Edirol UA-1000 */
1664 EXTERNAL_PORT(0x0582, 0x0044, 0, "%s MIDI"),
1665 CONTROL_PORT(0x0582, 0x0044, 1, "%s Control"),
1666 /* Edirol UR-80 */
1667 EXTERNAL_PORT(0x0582, 0x0048, 0, "%s MIDI"),
1668 EXTERNAL_PORT(0x0582, 0x0048, 1, "%s 1"),
1669 EXTERNAL_PORT(0x0582, 0x0048, 2, "%s 2"),
1670 /* Edirol PCR-A */
1671 EXTERNAL_PORT(0x0582, 0x004d, 0, "%s MIDI"),
1672 EXTERNAL_PORT(0x0582, 0x004d, 1, "%s 1"),
1673 EXTERNAL_PORT(0x0582, 0x004d, 2, "%s 2"),
1674 /* BOSS GT-PRO */
1675 CONTROL_PORT(0x0582, 0x0089, 0, "%s Control"),
1676 /* Edirol UM-3EX */
1677 CONTROL_PORT(0x0582, 0x009a, 3, "%s Control"),
1678 /* Roland VG-99 */
1679 CONTROL_PORT(0x0582, 0x00b2, 0, "%s Control"),
1680 EXTERNAL_PORT(0x0582, 0x00b2, 1, "%s MIDI"),
1681 /* Cakewalk Sonar V-Studio 100 */
1682 EXTERNAL_PORT(0x0582, 0x00eb, 0, "%s MIDI"),
1683 CONTROL_PORT(0x0582, 0x00eb, 1, "%s Control"),
1684 /* Roland VB-99 */
1685 CONTROL_PORT(0x0582, 0x0102, 0, "%s Control"),
1686 EXTERNAL_PORT(0x0582, 0x0102, 1, "%s MIDI"),
1687 /* Roland A-PRO */
1688 EXTERNAL_PORT(0x0582, 0x010f, 0, "%s MIDI"),
1689 CONTROL_PORT(0x0582, 0x010f, 1, "%s 1"),
1690 CONTROL_PORT(0x0582, 0x010f, 2, "%s 2"),
1691 /* Roland SD-50 */
1692 ROLAND_SYNTH_PORT(0x0582, 0x0114, 0, "%s Synth", 128),
1693 EXTERNAL_PORT(0x0582, 0x0114, 1, "%s MIDI"),
1694 CONTROL_PORT(0x0582, 0x0114, 2, "%s Control"),
1695 /* Roland OCTA-CAPTURE */
1696 EXTERNAL_PORT(0x0582, 0x0120, 0, "%s MIDI"),
1697 CONTROL_PORT(0x0582, 0x0120, 1, "%s Control"),
1698 EXTERNAL_PORT(0x0582, 0x0121, 0, "%s MIDI"),
1699 CONTROL_PORT(0x0582, 0x0121, 1, "%s Control"),
1700 /* Roland SPD-SX */
1701 CONTROL_PORT(0x0582, 0x0145, 0, "%s Control"),
1702 EXTERNAL_PORT(0x0582, 0x0145, 1, "%s MIDI"),
1703 /* Roland A-Series */
1704 CONTROL_PORT(0x0582, 0x0156, 0, "%s Keyboard"),
1705 EXTERNAL_PORT(0x0582, 0x0156, 1, "%s MIDI"),
1706 /* Roland INTEGRA-7 */
1707 ROLAND_SYNTH_PORT(0x0582, 0x015b, 0, "%s Synth", 128),
1708 CONTROL_PORT(0x0582, 0x015b, 1, "%s Control"),
1709 /* M-Audio MidiSport 8x8 */
1710 CONTROL_PORT(0x0763, 0x1031, 8, "%s Control"),
1711 CONTROL_PORT(0x0763, 0x1033, 8, "%s Control"),
1712 /* MOTU Fastlane */
1713 EXTERNAL_PORT(0x07fd, 0x0001, 0, "%s MIDI A"),
1714 EXTERNAL_PORT(0x07fd, 0x0001, 1, "%s MIDI B"),
1715 /* Emagic Unitor8/AMT8/MT4 */
1716 EXTERNAL_PORT(0x086a, 0x0001, 8, "%s Broadcast"),
1717 EXTERNAL_PORT(0x086a, 0x0002, 8, "%s Broadcast"),
1718 EXTERNAL_PORT(0x086a, 0x0003, 4, "%s Broadcast"),
1719 /* Akai MPD16 */
1720 CONTROL_PORT(0x09e8, 0x0062, 0, "%s Control"),
1721 PORT_INFO(0x09e8, 0x0062, 1, "%s MIDI", 0,
1722 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC |
1723 SNDRV_SEQ_PORT_TYPE_HARDWARE),
1724 /* Access Music Virus TI */
1725 EXTERNAL_PORT(0x133e, 0x0815, 0, "%s MIDI"),
1726 PORT_INFO(0x133e, 0x0815, 1, "%s Synth", 0,
1727 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC |
1728 SNDRV_SEQ_PORT_TYPE_HARDWARE |
1729 SNDRV_SEQ_PORT_TYPE_SYNTHESIZER),
1730};
1731
1732static struct port_info *find_port_info(struct snd_usb_midi *umidi, int number)
1733{
1734 int i;
1735
1736 for (i = 0; i < ARRAY_SIZE(snd_usbmidi_port_info); ++i) {
1737 if (snd_usbmidi_port_info[i].id == umidi->usb_id &&
1738 snd_usbmidi_port_info[i].port == number)
1739 return &snd_usbmidi_port_info[i];
1740 }
1741 return NULL;
1742}
1743
1744static void snd_usbmidi_get_port_info(struct snd_rawmidi *rmidi, int number,
1745 struct snd_seq_port_info *seq_port_info)
1746{
1747 struct snd_usb_midi *umidi = rmidi->private_data;
1748 struct port_info *port_info;
1749
1750 /* TODO: read port flags from descriptors */
1751 port_info = find_port_info(umidi, number);
1752 if (port_info) {
1753 seq_port_info->type = port_info->seq_flags;
1754 seq_port_info->midi_voices = port_info->voices;
1755 }
1756}
1757
1758static void snd_usbmidi_init_substream(struct snd_usb_midi *umidi,
1759 int stream, int number,
1760 struct snd_rawmidi_substream **rsubstream)
1761{
1762 struct port_info *port_info;
1763 const char *name_format;
1764
1765 struct snd_rawmidi_substream *substream =
1766 snd_usbmidi_find_substream(umidi, stream, number);
1767 if (!substream) {
1768 dev_err(&umidi->dev->dev, "substream %d:%d not found\n", stream,
1769 number);
1770 return;
1771 }
1772
1773 /* TODO: read port name from jack descriptor */
1774 port_info = find_port_info(umidi, number);
1775 name_format = port_info ? port_info->name : "%s MIDI %d";
1776 snprintf(substream->name, sizeof(substream->name),
1777 name_format, umidi->card->shortname, number + 1);
1778
1779 *rsubstream = substream;
1780}
1781
1782/*
1783 * Creates the endpoints and their ports.
1784 */
1785static int snd_usbmidi_create_endpoints(struct snd_usb_midi *umidi,
1786 struct snd_usb_midi_endpoint_info *endpoints)
1787{
1788 int i, j, err;
1789 int out_ports = 0, in_ports = 0;
1790
1791 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
1792 if (endpoints[i].out_cables) {
1793 err = snd_usbmidi_out_endpoint_create(umidi,
1794 &endpoints[i],
1795 &umidi->endpoints[i]);
1796 if (err < 0)
1797 return err;
1798 }
1799 if (endpoints[i].in_cables) {
1800 err = snd_usbmidi_in_endpoint_create(umidi,
1801 &endpoints[i],
1802 &umidi->endpoints[i]);
1803 if (err < 0)
1804 return err;
1805 }
1806
1807 for (j = 0; j < 0x10; ++j) {
1808 if (endpoints[i].out_cables & (1 << j)) {
1809 snd_usbmidi_init_substream(umidi,
1810 SNDRV_RAWMIDI_STREAM_OUTPUT,
1811 out_ports,
1812 &umidi->endpoints[i].out->ports[j].substream);
1813 ++out_ports;
1814 }
1815 if (endpoints[i].in_cables & (1 << j)) {
1816 snd_usbmidi_init_substream(umidi,
1817 SNDRV_RAWMIDI_STREAM_INPUT,
1818 in_ports,
1819 &umidi->endpoints[i].in->ports[j].substream);
1820 ++in_ports;
1821 }
1822 }
1823 }
1824 dev_dbg(&umidi->dev->dev, "created %d output and %d input ports\n",
1825 out_ports, in_ports);
1826 return 0;
1827}
1828
1829static struct usb_ms_endpoint_descriptor *find_usb_ms_endpoint_descriptor(
1830 struct usb_host_endpoint *hostep)
1831{
1832 unsigned char *extra = hostep->extra;
1833 int extralen = hostep->extralen;
1834
1835 while (extralen > 3) {
1836 struct usb_ms_endpoint_descriptor *ms_ep =
1837 (struct usb_ms_endpoint_descriptor *)extra;
1838
1839 if (ms_ep->bLength > 3 &&
1840 ms_ep->bDescriptorType == USB_DT_CS_ENDPOINT &&
1841 ms_ep->bDescriptorSubtype == UAC_MS_GENERAL)
1842 return ms_ep;
1843 if (!extra[0])
1844 break;
1845 extralen -= extra[0];
1846 extra += extra[0];
1847 }
1848 return NULL;
1849}
1850
1851/*
1852 * Returns MIDIStreaming device capabilities.
1853 */
1854static int snd_usbmidi_get_ms_info(struct snd_usb_midi *umidi,
1855 struct snd_usb_midi_endpoint_info *endpoints)
1856{
1857 struct usb_interface *intf;
1858 struct usb_host_interface *hostif;
1859 struct usb_interface_descriptor *intfd;
1860 struct usb_ms_header_descriptor *ms_header;
1861 struct usb_host_endpoint *hostep;
1862 struct usb_endpoint_descriptor *ep;
1863 struct usb_ms_endpoint_descriptor *ms_ep;
1864 int i, epidx;
1865
1866 intf = umidi->iface;
1867 if (!intf)
1868 return -ENXIO;
1869 hostif = &intf->altsetting[0];
1870 intfd = get_iface_desc(hostif);
1871 ms_header = (struct usb_ms_header_descriptor *)hostif->extra;
1872 if (hostif->extralen >= 7 &&
1873 ms_header->bLength >= 7 &&
1874 ms_header->bDescriptorType == USB_DT_CS_INTERFACE &&
1875 ms_header->bDescriptorSubtype == UAC_HEADER)
1876 dev_dbg(&umidi->dev->dev, "MIDIStreaming version %02x.%02x\n",
1877 ms_header->bcdMSC[1], ms_header->bcdMSC[0]);
1878 else
1879 dev_warn(&umidi->dev->dev,
1880 "MIDIStreaming interface descriptor not found\n");
1881
1882 epidx = 0;
1883 for (i = 0; i < intfd->bNumEndpoints; ++i) {
1884 hostep = &hostif->endpoint[i];
1885 ep = get_ep_desc(hostep);
1886 if (!usb_endpoint_xfer_bulk(ep) && !usb_endpoint_xfer_int(ep))
1887 continue;
1888 ms_ep = find_usb_ms_endpoint_descriptor(hostep);
1889 if (!ms_ep)
1890 continue;
1891 if (usb_endpoint_dir_out(ep)) {
1892 if (endpoints[epidx].out_ep) {
1893 if (++epidx >= MIDI_MAX_ENDPOINTS) {
1894 dev_warn(&umidi->dev->dev,
1895 "too many endpoints\n");
1896 break;
1897 }
1898 }
1899 endpoints[epidx].out_ep = usb_endpoint_num(ep);
1900 if (usb_endpoint_xfer_int(ep))
1901 endpoints[epidx].out_interval = ep->bInterval;
1902 else if (snd_usb_get_speed(umidi->dev) == USB_SPEED_LOW)
1903 /*
1904 * Low speed bulk transfers don't exist, so
1905 * force interrupt transfers for devices like
1906 * ESI MIDI Mate that try to use them anyway.
1907 */
1908 endpoints[epidx].out_interval = 1;
1909 endpoints[epidx].out_cables =
1910 (1 << ms_ep->bNumEmbMIDIJack) - 1;
1911 dev_dbg(&umidi->dev->dev, "EP %02X: %d jack(s)\n",
1912 ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack);
1913 } else {
1914 if (endpoints[epidx].in_ep) {
1915 if (++epidx >= MIDI_MAX_ENDPOINTS) {
1916 dev_warn(&umidi->dev->dev,
1917 "too many endpoints\n");
1918 break;
1919 }
1920 }
1921 endpoints[epidx].in_ep = usb_endpoint_num(ep);
1922 if (usb_endpoint_xfer_int(ep))
1923 endpoints[epidx].in_interval = ep->bInterval;
1924 else if (snd_usb_get_speed(umidi->dev) == USB_SPEED_LOW)
1925 endpoints[epidx].in_interval = 1;
1926 endpoints[epidx].in_cables =
1927 (1 << ms_ep->bNumEmbMIDIJack) - 1;
1928 dev_dbg(&umidi->dev->dev, "EP %02X: %d jack(s)\n",
1929 ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack);
1930 }
1931 }
1932 return 0;
1933}
1934
1935static int roland_load_info(struct snd_kcontrol *kcontrol,
1936 struct snd_ctl_elem_info *info)
1937{
1938 static const char *const names[] = { "High Load", "Light Load" };
1939
1940 return snd_ctl_enum_info(info, 1, 2, names);
1941}
1942
1943static int roland_load_get(struct snd_kcontrol *kcontrol,
1944 struct snd_ctl_elem_value *value)
1945{
1946 value->value.enumerated.item[0] = kcontrol->private_value;
1947 return 0;
1948}
1949
1950static int roland_load_put(struct snd_kcontrol *kcontrol,
1951 struct snd_ctl_elem_value *value)
1952{
1953 struct snd_usb_midi *umidi = kcontrol->private_data;
1954 int changed;
1955
1956 if (value->value.enumerated.item[0] > 1)
1957 return -EINVAL;
1958 mutex_lock(&umidi->mutex);
1959 changed = value->value.enumerated.item[0] != kcontrol->private_value;
1960 if (changed)
1961 kcontrol->private_value = value->value.enumerated.item[0];
1962 mutex_unlock(&umidi->mutex);
1963 return changed;
1964}
1965
1966static const struct snd_kcontrol_new roland_load_ctl = {
1967 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
1968 .name = "MIDI Input Mode",
1969 .info = roland_load_info,
1970 .get = roland_load_get,
1971 .put = roland_load_put,
1972 .private_value = 1,
1973};
1974
1975/*
1976 * On Roland devices, use the second alternate setting to be able to use
1977 * the interrupt input endpoint.
1978 */
1979static void snd_usbmidi_switch_roland_altsetting(struct snd_usb_midi *umidi)
1980{
1981 struct usb_interface *intf;
1982 struct usb_host_interface *hostif;
1983 struct usb_interface_descriptor *intfd;
1984
1985 intf = umidi->iface;
1986 if (!intf || intf->num_altsetting != 2)
1987 return;
1988
1989 hostif = &intf->altsetting[1];
1990 intfd = get_iface_desc(hostif);
1991 /* If either or both of the endpoints support interrupt transfer,
1992 * then use the alternate setting
1993 */
1994 if (intfd->bNumEndpoints != 2 ||
1995 !((get_endpoint(hostif, 0)->bmAttributes &
1996 USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT ||
1997 (get_endpoint(hostif, 1)->bmAttributes &
1998 USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT))
1999 return;
2000
2001 dev_dbg(&umidi->dev->dev, "switching to altsetting %d with int ep\n",
2002 intfd->bAlternateSetting);
2003 usb_set_interface(umidi->dev, intfd->bInterfaceNumber,
2004 intfd->bAlternateSetting);
2005
2006 umidi->roland_load_ctl = snd_ctl_new1(&roland_load_ctl, umidi);
2007 if (snd_ctl_add(umidi->card, umidi->roland_load_ctl) < 0)
2008 umidi->roland_load_ctl = NULL;
2009}
2010
2011/*
2012 * Try to find any usable endpoints in the interface.
2013 */
2014static int snd_usbmidi_detect_endpoints(struct snd_usb_midi *umidi,
2015 struct snd_usb_midi_endpoint_info *endpoint,
2016 int max_endpoints)
2017{
2018 struct usb_interface *intf;
2019 struct usb_host_interface *hostif;
2020 struct usb_interface_descriptor *intfd;
2021 struct usb_endpoint_descriptor *epd;
2022 int i, out_eps = 0, in_eps = 0;
2023
2024 if (USB_ID_VENDOR(umidi->usb_id) == 0x0582)
2025 snd_usbmidi_switch_roland_altsetting(umidi);
2026
2027 if (endpoint[0].out_ep || endpoint[0].in_ep)
2028 return 0;
2029
2030 intf = umidi->iface;
2031 if (!intf || intf->num_altsetting < 1)
2032 return -ENOENT;
2033 hostif = intf->cur_altsetting;
2034 intfd = get_iface_desc(hostif);
2035
2036 for (i = 0; i < intfd->bNumEndpoints; ++i) {
2037 epd = get_endpoint(hostif, i);
2038 if (!usb_endpoint_xfer_bulk(epd) &&
2039 !usb_endpoint_xfer_int(epd))
2040 continue;
2041 if (out_eps < max_endpoints &&
2042 usb_endpoint_dir_out(epd)) {
2043 endpoint[out_eps].out_ep = usb_endpoint_num(epd);
2044 if (usb_endpoint_xfer_int(epd))
2045 endpoint[out_eps].out_interval = epd->bInterval;
2046 ++out_eps;
2047 }
2048 if (in_eps < max_endpoints &&
2049 usb_endpoint_dir_in(epd)) {
2050 endpoint[in_eps].in_ep = usb_endpoint_num(epd);
2051 if (usb_endpoint_xfer_int(epd))
2052 endpoint[in_eps].in_interval = epd->bInterval;
2053 ++in_eps;
2054 }
2055 }
2056 return (out_eps || in_eps) ? 0 : -ENOENT;
2057}
2058
2059/*
2060 * Detects the endpoints for one-port-per-endpoint protocols.
2061 */
2062static int snd_usbmidi_detect_per_port_endpoints(struct snd_usb_midi *umidi,
2063 struct snd_usb_midi_endpoint_info *endpoints)
2064{
2065 int err, i;
2066
2067 err = snd_usbmidi_detect_endpoints(umidi, endpoints, MIDI_MAX_ENDPOINTS);
2068 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
2069 if (endpoints[i].out_ep)
2070 endpoints[i].out_cables = 0x0001;
2071 if (endpoints[i].in_ep)
2072 endpoints[i].in_cables = 0x0001;
2073 }
2074 return err;
2075}
2076
2077/*
2078 * Detects the endpoints and ports of Yamaha devices.
2079 */
2080static int snd_usbmidi_detect_yamaha(struct snd_usb_midi *umidi,
2081 struct snd_usb_midi_endpoint_info *endpoint)
2082{
2083 struct usb_interface *intf;
2084 struct usb_host_interface *hostif;
2085 struct usb_interface_descriptor *intfd;
2086 uint8_t *cs_desc;
2087
2088 intf = umidi->iface;
2089 if (!intf)
2090 return -ENOENT;
2091 hostif = intf->altsetting;
2092 intfd = get_iface_desc(hostif);
2093 if (intfd->bNumEndpoints < 1)
2094 return -ENOENT;
2095
2096 /*
2097 * For each port there is one MIDI_IN/OUT_JACK descriptor, not
2098 * necessarily with any useful contents. So simply count 'em.
2099 */
2100 for (cs_desc = hostif->extra;
2101 cs_desc < hostif->extra + hostif->extralen && cs_desc[0] >= 2;
2102 cs_desc += cs_desc[0]) {
2103 if (cs_desc[1] == USB_DT_CS_INTERFACE) {
2104 if (cs_desc[2] == UAC_MIDI_IN_JACK)
2105 endpoint->in_cables =
2106 (endpoint->in_cables << 1) | 1;
2107 else if (cs_desc[2] == UAC_MIDI_OUT_JACK)
2108 endpoint->out_cables =
2109 (endpoint->out_cables << 1) | 1;
2110 }
2111 }
2112 if (!endpoint->in_cables && !endpoint->out_cables)
2113 return -ENOENT;
2114
2115 return snd_usbmidi_detect_endpoints(umidi, endpoint, 1);
2116}
2117
2118/*
2119 * Detects the endpoints and ports of Roland devices.
2120 */
2121static int snd_usbmidi_detect_roland(struct snd_usb_midi *umidi,
2122 struct snd_usb_midi_endpoint_info *endpoint)
2123{
2124 struct usb_interface *intf;
2125 struct usb_host_interface *hostif;
2126 u8 *cs_desc;
2127
2128 intf = umidi->iface;
2129 if (!intf)
2130 return -ENOENT;
2131 hostif = intf->altsetting;
2132 /*
2133 * Some devices have a descriptor <06 24 F1 02 <inputs> <outputs>>,
2134 * some have standard class descriptors, or both kinds, or neither.
2135 */
2136 for (cs_desc = hostif->extra;
2137 cs_desc < hostif->extra + hostif->extralen && cs_desc[0] >= 2;
2138 cs_desc += cs_desc[0]) {
2139 if (cs_desc[0] >= 6 &&
2140 cs_desc[1] == USB_DT_CS_INTERFACE &&
2141 cs_desc[2] == 0xf1 &&
2142 cs_desc[3] == 0x02) {
2143 endpoint->in_cables = (1 << cs_desc[4]) - 1;
2144 endpoint->out_cables = (1 << cs_desc[5]) - 1;
2145 return snd_usbmidi_detect_endpoints(umidi, endpoint, 1);
2146 } else if (cs_desc[0] >= 7 &&
2147 cs_desc[1] == USB_DT_CS_INTERFACE &&
2148 cs_desc[2] == UAC_HEADER) {
2149 return snd_usbmidi_get_ms_info(umidi, endpoint);
2150 }
2151 }
2152
2153 return -ENODEV;
2154}
2155
2156/*
2157 * Creates the endpoints and their ports for Midiman devices.
2158 */
2159static int snd_usbmidi_create_endpoints_midiman(struct snd_usb_midi *umidi,
2160 struct snd_usb_midi_endpoint_info *endpoint)
2161{
2162 struct snd_usb_midi_endpoint_info ep_info;
2163 struct usb_interface *intf;
2164 struct usb_host_interface *hostif;
2165 struct usb_interface_descriptor *intfd;
2166 struct usb_endpoint_descriptor *epd;
2167 int cable, err;
2168
2169 intf = umidi->iface;
2170 if (!intf)
2171 return -ENOENT;
2172 hostif = intf->altsetting;
2173 intfd = get_iface_desc(hostif);
2174 /*
2175 * The various MidiSport devices have more or less random endpoint
2176 * numbers, so we have to identify the endpoints by their index in
2177 * the descriptor array, like the driver for that other OS does.
2178 *
2179 * There is one interrupt input endpoint for all input ports, one
2180 * bulk output endpoint for even-numbered ports, and one for odd-
2181 * numbered ports. Both bulk output endpoints have corresponding
2182 * input bulk endpoints (at indices 1 and 3) which aren't used.
2183 */
2184 if (intfd->bNumEndpoints < (endpoint->out_cables > 0x0001 ? 5 : 3)) {
2185 dev_dbg(&umidi->dev->dev, "not enough endpoints\n");
2186 return -ENOENT;
2187 }
2188
2189 epd = get_endpoint(hostif, 0);
2190 if (!usb_endpoint_dir_in(epd) || !usb_endpoint_xfer_int(epd)) {
2191 dev_dbg(&umidi->dev->dev, "endpoint[0] isn't interrupt\n");
2192 return -ENXIO;
2193 }
2194 epd = get_endpoint(hostif, 2);
2195 if (!usb_endpoint_dir_out(epd) || !usb_endpoint_xfer_bulk(epd)) {
2196 dev_dbg(&umidi->dev->dev, "endpoint[2] isn't bulk output\n");
2197 return -ENXIO;
2198 }
2199 if (endpoint->out_cables > 0x0001) {
2200 epd = get_endpoint(hostif, 4);
2201 if (!usb_endpoint_dir_out(epd) ||
2202 !usb_endpoint_xfer_bulk(epd)) {
2203 dev_dbg(&umidi->dev->dev,
2204 "endpoint[4] isn't bulk output\n");
2205 return -ENXIO;
2206 }
2207 }
2208
2209 ep_info.out_ep = get_endpoint(hostif, 2)->bEndpointAddress &
2210 USB_ENDPOINT_NUMBER_MASK;
2211 ep_info.out_interval = 0;
2212 ep_info.out_cables = endpoint->out_cables & 0x5555;
2213 err = snd_usbmidi_out_endpoint_create(umidi, &ep_info,
2214 &umidi->endpoints[0]);
2215 if (err < 0)
2216 return err;
2217
2218 ep_info.in_ep = get_endpoint(hostif, 0)->bEndpointAddress &
2219 USB_ENDPOINT_NUMBER_MASK;
2220 ep_info.in_interval = get_endpoint(hostif, 0)->bInterval;
2221 ep_info.in_cables = endpoint->in_cables;
2222 err = snd_usbmidi_in_endpoint_create(umidi, &ep_info,
2223 &umidi->endpoints[0]);
2224 if (err < 0)
2225 return err;
2226
2227 if (endpoint->out_cables > 0x0001) {
2228 ep_info.out_ep = get_endpoint(hostif, 4)->bEndpointAddress &
2229 USB_ENDPOINT_NUMBER_MASK;
2230 ep_info.out_cables = endpoint->out_cables & 0xaaaa;
2231 err = snd_usbmidi_out_endpoint_create(umidi, &ep_info,
2232 &umidi->endpoints[1]);
2233 if (err < 0)
2234 return err;
2235 }
2236
2237 for (cable = 0; cable < 0x10; ++cable) {
2238 if (endpoint->out_cables & (1 << cable))
2239 snd_usbmidi_init_substream(umidi,
2240 SNDRV_RAWMIDI_STREAM_OUTPUT,
2241 cable,
2242 &umidi->endpoints[cable & 1].out->ports[cable].substream);
2243 if (endpoint->in_cables & (1 << cable))
2244 snd_usbmidi_init_substream(umidi,
2245 SNDRV_RAWMIDI_STREAM_INPUT,
2246 cable,
2247 &umidi->endpoints[0].in->ports[cable].substream);
2248 }
2249 return 0;
2250}
2251
2252static const struct snd_rawmidi_global_ops snd_usbmidi_ops = {
2253 .get_port_info = snd_usbmidi_get_port_info,
2254};
2255
2256static int snd_usbmidi_create_rawmidi(struct snd_usb_midi *umidi,
2257 int out_ports, int in_ports)
2258{
2259 struct snd_rawmidi *rmidi;
2260 int err;
2261
2262 err = snd_rawmidi_new(umidi->card, "USB MIDI",
2263 umidi->next_midi_device++,
2264 out_ports, in_ports, &rmidi);
2265 if (err < 0)
2266 return err;
2267 strcpy(rmidi->name, umidi->card->shortname);
2268 rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
2269 SNDRV_RAWMIDI_INFO_INPUT |
2270 SNDRV_RAWMIDI_INFO_DUPLEX;
2271 rmidi->ops = &snd_usbmidi_ops;
2272 rmidi->private_data = umidi;
2273 rmidi->private_free = snd_usbmidi_rawmidi_free;
2274 snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
2275 &snd_usbmidi_output_ops);
2276 snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
2277 &snd_usbmidi_input_ops);
2278
2279 umidi->rmidi = rmidi;
2280 return 0;
2281}
2282
2283/*
2284 * Temporarily stop input.
2285 */
2286void snd_usbmidi_input_stop(struct list_head *p)
2287{
2288 struct snd_usb_midi *umidi;
2289 unsigned int i, j;
2290
2291 umidi = list_entry(p, struct snd_usb_midi, list);
2292 if (!umidi->input_running)
2293 return;
2294 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
2295 struct snd_usb_midi_endpoint *ep = &umidi->endpoints[i];
2296 if (ep->in)
2297 for (j = 0; j < INPUT_URBS; ++j)
2298 usb_kill_urb(ep->in->urbs[j]);
2299 }
2300 umidi->input_running = 0;
2301}
2302EXPORT_SYMBOL(snd_usbmidi_input_stop);
2303
2304static void snd_usbmidi_input_start_ep(struct snd_usb_midi *umidi,
2305 struct snd_usb_midi_in_endpoint *ep)
2306{
2307 unsigned int i;
2308 unsigned long flags;
2309
2310 if (!ep)
2311 return;
2312 for (i = 0; i < INPUT_URBS; ++i) {
2313 struct urb *urb = ep->urbs[i];
2314 spin_lock_irqsave(&umidi->disc_lock, flags);
2315 if (!atomic_read(&urb->use_count)) {
2316 urb->dev = ep->umidi->dev;
2317 snd_usbmidi_submit_urb(urb, GFP_ATOMIC);
2318 }
2319 spin_unlock_irqrestore(&umidi->disc_lock, flags);
2320 }
2321}
2322
2323/*
2324 * Resume input after a call to snd_usbmidi_input_stop().
2325 */
2326void snd_usbmidi_input_start(struct list_head *p)
2327{
2328 struct snd_usb_midi *umidi;
2329 int i;
2330
2331 umidi = list_entry(p, struct snd_usb_midi, list);
2332 if (umidi->input_running || !umidi->opened[1])
2333 return;
2334 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i)
2335 snd_usbmidi_input_start_ep(umidi, umidi->endpoints[i].in);
2336 umidi->input_running = 1;
2337}
2338EXPORT_SYMBOL(snd_usbmidi_input_start);
2339
2340/*
2341 * Prepare for suspend. Typically called from the USB suspend callback.
2342 */
2343void snd_usbmidi_suspend(struct list_head *p)
2344{
2345 struct snd_usb_midi *umidi;
2346
2347 umidi = list_entry(p, struct snd_usb_midi, list);
2348 mutex_lock(&umidi->mutex);
2349 snd_usbmidi_input_stop(p);
2350 mutex_unlock(&umidi->mutex);
2351}
2352EXPORT_SYMBOL(snd_usbmidi_suspend);
2353
2354/*
2355 * Resume. Typically called from the USB resume callback.
2356 */
2357void snd_usbmidi_resume(struct list_head *p)
2358{
2359 struct snd_usb_midi *umidi;
2360
2361 umidi = list_entry(p, struct snd_usb_midi, list);
2362 mutex_lock(&umidi->mutex);
2363 snd_usbmidi_input_start(p);
2364 mutex_unlock(&umidi->mutex);
2365}
2366EXPORT_SYMBOL(snd_usbmidi_resume);
2367
2368/*
2369 * Creates and registers everything needed for a MIDI streaming interface.
2370 */
2371int __snd_usbmidi_create(struct snd_card *card,
2372 struct usb_interface *iface,
2373 struct list_head *midi_list,
2374 const struct snd_usb_audio_quirk *quirk,
2375 unsigned int usb_id)
2376{
2377 struct snd_usb_midi *umidi;
2378 struct snd_usb_midi_endpoint_info endpoints[MIDI_MAX_ENDPOINTS];
2379 int out_ports, in_ports;
2380 int i, err;
2381
2382 umidi = kzalloc(sizeof(*umidi), GFP_KERNEL);
2383 if (!umidi)
2384 return -ENOMEM;
2385 umidi->dev = interface_to_usbdev(iface);
2386 umidi->card = card;
2387 umidi->iface = iface;
2388 umidi->quirk = quirk;
2389 umidi->usb_protocol_ops = &snd_usbmidi_standard_ops;
2390 spin_lock_init(&umidi->disc_lock);
2391 init_rwsem(&umidi->disc_rwsem);
2392 mutex_init(&umidi->mutex);
2393 if (!usb_id)
2394 usb_id = USB_ID(le16_to_cpu(umidi->dev->descriptor.idVendor),
2395 le16_to_cpu(umidi->dev->descriptor.idProduct));
2396 umidi->usb_id = usb_id;
2397 timer_setup(&umidi->error_timer, snd_usbmidi_error_timer, 0);
2398
2399 /* detect the endpoint(s) to use */
2400 memset(endpoints, 0, sizeof(endpoints));
2401 switch (quirk ? quirk->type : QUIRK_MIDI_STANDARD_INTERFACE) {
2402 case QUIRK_MIDI_STANDARD_INTERFACE:
2403 err = snd_usbmidi_get_ms_info(umidi, endpoints);
2404 if (umidi->usb_id == USB_ID(0x0763, 0x0150)) /* M-Audio Uno */
2405 umidi->usb_protocol_ops =
2406 &snd_usbmidi_maudio_broken_running_status_ops;
2407 break;
2408 case QUIRK_MIDI_US122L:
2409 umidi->usb_protocol_ops = &snd_usbmidi_122l_ops;
2410 fallthrough;
2411 case QUIRK_MIDI_FIXED_ENDPOINT:
2412 memcpy(&endpoints[0], quirk->data,
2413 sizeof(struct snd_usb_midi_endpoint_info));
2414 err = snd_usbmidi_detect_endpoints(umidi, &endpoints[0], 1);
2415 break;
2416 case QUIRK_MIDI_YAMAHA:
2417 err = snd_usbmidi_detect_yamaha(umidi, &endpoints[0]);
2418 break;
2419 case QUIRK_MIDI_ROLAND:
2420 err = snd_usbmidi_detect_roland(umidi, &endpoints[0]);
2421 break;
2422 case QUIRK_MIDI_MIDIMAN:
2423 umidi->usb_protocol_ops = &snd_usbmidi_midiman_ops;
2424 memcpy(&endpoints[0], quirk->data,
2425 sizeof(struct snd_usb_midi_endpoint_info));
2426 err = 0;
2427 break;
2428 case QUIRK_MIDI_NOVATION:
2429 umidi->usb_protocol_ops = &snd_usbmidi_novation_ops;
2430 err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
2431 break;
2432 case QUIRK_MIDI_RAW_BYTES:
2433 umidi->usb_protocol_ops = &snd_usbmidi_raw_ops;
2434 /*
2435 * Interface 1 contains isochronous endpoints, but with the same
2436 * numbers as in interface 0. Since it is interface 1 that the
2437 * USB core has most recently seen, these descriptors are now
2438 * associated with the endpoint numbers. This will foul up our
2439 * attempts to submit bulk/interrupt URBs to the endpoints in
2440 * interface 0, so we have to make sure that the USB core looks
2441 * again at interface 0 by calling usb_set_interface() on it.
2442 */
2443 if (umidi->usb_id == USB_ID(0x07fd, 0x0001)) /* MOTU Fastlane */
2444 usb_set_interface(umidi->dev, 0, 0);
2445 err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
2446 break;
2447 case QUIRK_MIDI_EMAGIC:
2448 umidi->usb_protocol_ops = &snd_usbmidi_emagic_ops;
2449 memcpy(&endpoints[0], quirk->data,
2450 sizeof(struct snd_usb_midi_endpoint_info));
2451 err = snd_usbmidi_detect_endpoints(umidi, &endpoints[0], 1);
2452 break;
2453 case QUIRK_MIDI_CME:
2454 umidi->usb_protocol_ops = &snd_usbmidi_cme_ops;
2455 err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
2456 break;
2457 case QUIRK_MIDI_AKAI:
2458 umidi->usb_protocol_ops = &snd_usbmidi_akai_ops;
2459 err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
2460 /* endpoint 1 is input-only */
2461 endpoints[1].out_cables = 0;
2462 break;
2463 case QUIRK_MIDI_FTDI:
2464 umidi->usb_protocol_ops = &snd_usbmidi_ftdi_ops;
2465
2466 /* set baud rate to 31250 (48 MHz / 16 / 96) */
2467 err = usb_control_msg(umidi->dev, usb_sndctrlpipe(umidi->dev, 0),
2468 3, 0x40, 0x60, 0, NULL, 0, 1000);
2469 if (err < 0)
2470 break;
2471
2472 err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
2473 break;
2474 case QUIRK_MIDI_CH345:
2475 umidi->usb_protocol_ops = &snd_usbmidi_ch345_broken_sysex_ops;
2476 err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
2477 break;
2478 default:
2479 dev_err(&umidi->dev->dev, "invalid quirk type %d\n",
2480 quirk->type);
2481 err = -ENXIO;
2482 break;
2483 }
2484 if (err < 0)
2485 goto free_midi;
2486
2487 /* create rawmidi device */
2488 out_ports = 0;
2489 in_ports = 0;
2490 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
2491 out_ports += hweight16(endpoints[i].out_cables);
2492 in_ports += hweight16(endpoints[i].in_cables);
2493 }
2494 err = snd_usbmidi_create_rawmidi(umidi, out_ports, in_ports);
2495 if (err < 0)
2496 goto free_midi;
2497
2498 /* create endpoint/port structures */
2499 if (quirk && quirk->type == QUIRK_MIDI_MIDIMAN)
2500 err = snd_usbmidi_create_endpoints_midiman(umidi, &endpoints[0]);
2501 else
2502 err = snd_usbmidi_create_endpoints(umidi, endpoints);
2503 if (err < 0)
2504 goto exit;
2505
2506 usb_autopm_get_interface_no_resume(umidi->iface);
2507
2508 list_add_tail(&umidi->list, midi_list);
2509 return 0;
2510
2511free_midi:
2512 kfree(umidi);
2513exit:
2514 return err;
2515}
2516EXPORT_SYMBOL(__snd_usbmidi_create);
1/*
2 * usbmidi.c - ALSA USB MIDI driver
3 *
4 * Copyright (c) 2002-2009 Clemens Ladisch
5 * All rights reserved.
6 *
7 * Based on the OSS usb-midi driver by NAGANO Daisuke,
8 * NetBSD's umidi driver by Takuya SHIOZAKI,
9 * the "USB Device Class Definition for MIDI Devices" by Roland
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. The name of the author may not be used to endorse or promote products
18 * derived from this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed and/or modified under the
21 * terms of the GNU General Public License as published by the Free Software
22 * Foundation; either version 2 of the License, or (at your option) any later
23 * version.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
28 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
29 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
33 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
34 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
35 * SUCH DAMAGE.
36 */
37
38#include <linux/kernel.h>
39#include <linux/types.h>
40#include <linux/bitops.h>
41#include <linux/interrupt.h>
42#include <linux/spinlock.h>
43#include <linux/string.h>
44#include <linux/init.h>
45#include <linux/slab.h>
46#include <linux/timer.h>
47#include <linux/usb.h>
48#include <linux/wait.h>
49#include <linux/usb/audio.h>
50#include <linux/module.h>
51
52#include <sound/core.h>
53#include <sound/control.h>
54#include <sound/rawmidi.h>
55#include <sound/asequencer.h>
56#include "usbaudio.h"
57#include "midi.h"
58#include "power.h"
59#include "helper.h"
60
61/*
62 * define this to log all USB packets
63 */
64/* #define DUMP_PACKETS */
65
66/*
67 * how long to wait after some USB errors, so that khubd can disconnect() us
68 * without too many spurious errors
69 */
70#define ERROR_DELAY_JIFFIES (HZ / 10)
71
72#define OUTPUT_URBS 7
73#define INPUT_URBS 7
74
75
76MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
77MODULE_DESCRIPTION("USB Audio/MIDI helper module");
78MODULE_LICENSE("Dual BSD/GPL");
79
80
81struct usb_ms_header_descriptor {
82 __u8 bLength;
83 __u8 bDescriptorType;
84 __u8 bDescriptorSubtype;
85 __u8 bcdMSC[2];
86 __le16 wTotalLength;
87} __attribute__ ((packed));
88
89struct usb_ms_endpoint_descriptor {
90 __u8 bLength;
91 __u8 bDescriptorType;
92 __u8 bDescriptorSubtype;
93 __u8 bNumEmbMIDIJack;
94 __u8 baAssocJackID[0];
95} __attribute__ ((packed));
96
97struct snd_usb_midi_in_endpoint;
98struct snd_usb_midi_out_endpoint;
99struct snd_usb_midi_endpoint;
100
101struct usb_protocol_ops {
102 void (*input)(struct snd_usb_midi_in_endpoint*, uint8_t*, int);
103 void (*output)(struct snd_usb_midi_out_endpoint *ep, struct urb *urb);
104 void (*output_packet)(struct urb*, uint8_t, uint8_t, uint8_t, uint8_t);
105 void (*init_out_endpoint)(struct snd_usb_midi_out_endpoint*);
106 void (*finish_out_endpoint)(struct snd_usb_midi_out_endpoint*);
107};
108
109struct snd_usb_midi {
110 struct usb_device *dev;
111 struct snd_card *card;
112 struct usb_interface *iface;
113 const struct snd_usb_audio_quirk *quirk;
114 struct snd_rawmidi *rmidi;
115 struct usb_protocol_ops* usb_protocol_ops;
116 struct list_head list;
117 struct timer_list error_timer;
118 spinlock_t disc_lock;
119 struct mutex mutex;
120 u32 usb_id;
121 int next_midi_device;
122
123 struct snd_usb_midi_endpoint {
124 struct snd_usb_midi_out_endpoint *out;
125 struct snd_usb_midi_in_endpoint *in;
126 } endpoints[MIDI_MAX_ENDPOINTS];
127 unsigned long input_triggered;
128 unsigned int opened;
129 unsigned char disconnected;
130
131 struct snd_kcontrol *roland_load_ctl;
132};
133
134struct snd_usb_midi_out_endpoint {
135 struct snd_usb_midi* umidi;
136 struct out_urb_context {
137 struct urb *urb;
138 struct snd_usb_midi_out_endpoint *ep;
139 } urbs[OUTPUT_URBS];
140 unsigned int active_urbs;
141 unsigned int drain_urbs;
142 int max_transfer; /* size of urb buffer */
143 struct tasklet_struct tasklet;
144 unsigned int next_urb;
145 spinlock_t buffer_lock;
146
147 struct usbmidi_out_port {
148 struct snd_usb_midi_out_endpoint* ep;
149 struct snd_rawmidi_substream *substream;
150 int active;
151 uint8_t cable; /* cable number << 4 */
152 uint8_t state;
153#define STATE_UNKNOWN 0
154#define STATE_1PARAM 1
155#define STATE_2PARAM_1 2
156#define STATE_2PARAM_2 3
157#define STATE_SYSEX_0 4
158#define STATE_SYSEX_1 5
159#define STATE_SYSEX_2 6
160 uint8_t data[2];
161 } ports[0x10];
162 int current_port;
163
164 wait_queue_head_t drain_wait;
165};
166
167struct snd_usb_midi_in_endpoint {
168 struct snd_usb_midi* umidi;
169 struct urb* urbs[INPUT_URBS];
170 struct usbmidi_in_port {
171 struct snd_rawmidi_substream *substream;
172 u8 running_status_length;
173 } ports[0x10];
174 u8 seen_f5;
175 u8 error_resubmit;
176 int current_port;
177};
178
179static void snd_usbmidi_do_output(struct snd_usb_midi_out_endpoint* ep);
180
181static const uint8_t snd_usbmidi_cin_length[] = {
182 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1
183};
184
185/*
186 * Submits the URB, with error handling.
187 */
188static int snd_usbmidi_submit_urb(struct urb* urb, gfp_t flags)
189{
190 int err = usb_submit_urb(urb, flags);
191 if (err < 0 && err != -ENODEV)
192 snd_printk(KERN_ERR "usb_submit_urb: %d\n", err);
193 return err;
194}
195
196/*
197 * Error handling for URB completion functions.
198 */
199static int snd_usbmidi_urb_error(int status)
200{
201 switch (status) {
202 /* manually unlinked, or device gone */
203 case -ENOENT:
204 case -ECONNRESET:
205 case -ESHUTDOWN:
206 case -ENODEV:
207 return -ENODEV;
208 /* errors that might occur during unplugging */
209 case -EPROTO:
210 case -ETIME:
211 case -EILSEQ:
212 return -EIO;
213 default:
214 snd_printk(KERN_ERR "urb status %d\n", status);
215 return 0; /* continue */
216 }
217}
218
219/*
220 * Receives a chunk of MIDI data.
221 */
222static void snd_usbmidi_input_data(struct snd_usb_midi_in_endpoint* ep, int portidx,
223 uint8_t* data, int length)
224{
225 struct usbmidi_in_port* port = &ep->ports[portidx];
226
227 if (!port->substream) {
228 snd_printd("unexpected port %d!\n", portidx);
229 return;
230 }
231 if (!test_bit(port->substream->number, &ep->umidi->input_triggered))
232 return;
233 snd_rawmidi_receive(port->substream, data, length);
234}
235
236#ifdef DUMP_PACKETS
237static void dump_urb(const char *type, const u8 *data, int length)
238{
239 snd_printk(KERN_DEBUG "%s packet: [", type);
240 for (; length > 0; ++data, --length)
241 printk(" %02x", *data);
242 printk(" ]\n");
243}
244#else
245#define dump_urb(type, data, length) /* nothing */
246#endif
247
248/*
249 * Processes the data read from the device.
250 */
251static void snd_usbmidi_in_urb_complete(struct urb* urb)
252{
253 struct snd_usb_midi_in_endpoint* ep = urb->context;
254
255 if (urb->status == 0) {
256 dump_urb("received", urb->transfer_buffer, urb->actual_length);
257 ep->umidi->usb_protocol_ops->input(ep, urb->transfer_buffer,
258 urb->actual_length);
259 } else {
260 int err = snd_usbmidi_urb_error(urb->status);
261 if (err < 0) {
262 if (err != -ENODEV) {
263 ep->error_resubmit = 1;
264 mod_timer(&ep->umidi->error_timer,
265 jiffies + ERROR_DELAY_JIFFIES);
266 }
267 return;
268 }
269 }
270
271 urb->dev = ep->umidi->dev;
272 snd_usbmidi_submit_urb(urb, GFP_ATOMIC);
273}
274
275static void snd_usbmidi_out_urb_complete(struct urb* urb)
276{
277 struct out_urb_context *context = urb->context;
278 struct snd_usb_midi_out_endpoint* ep = context->ep;
279 unsigned int urb_index;
280
281 spin_lock(&ep->buffer_lock);
282 urb_index = context - ep->urbs;
283 ep->active_urbs &= ~(1 << urb_index);
284 if (unlikely(ep->drain_urbs)) {
285 ep->drain_urbs &= ~(1 << urb_index);
286 wake_up(&ep->drain_wait);
287 }
288 spin_unlock(&ep->buffer_lock);
289 if (urb->status < 0) {
290 int err = snd_usbmidi_urb_error(urb->status);
291 if (err < 0) {
292 if (err != -ENODEV)
293 mod_timer(&ep->umidi->error_timer,
294 jiffies + ERROR_DELAY_JIFFIES);
295 return;
296 }
297 }
298 snd_usbmidi_do_output(ep);
299}
300
301/*
302 * This is called when some data should be transferred to the device
303 * (from one or more substreams).
304 */
305static void snd_usbmidi_do_output(struct snd_usb_midi_out_endpoint* ep)
306{
307 unsigned int urb_index;
308 struct urb* urb;
309 unsigned long flags;
310
311 spin_lock_irqsave(&ep->buffer_lock, flags);
312 if (ep->umidi->disconnected) {
313 spin_unlock_irqrestore(&ep->buffer_lock, flags);
314 return;
315 }
316
317 urb_index = ep->next_urb;
318 for (;;) {
319 if (!(ep->active_urbs & (1 << urb_index))) {
320 urb = ep->urbs[urb_index].urb;
321 urb->transfer_buffer_length = 0;
322 ep->umidi->usb_protocol_ops->output(ep, urb);
323 if (urb->transfer_buffer_length == 0)
324 break;
325
326 dump_urb("sending", urb->transfer_buffer,
327 urb->transfer_buffer_length);
328 urb->dev = ep->umidi->dev;
329 if (snd_usbmidi_submit_urb(urb, GFP_ATOMIC) < 0)
330 break;
331 ep->active_urbs |= 1 << urb_index;
332 }
333 if (++urb_index >= OUTPUT_URBS)
334 urb_index = 0;
335 if (urb_index == ep->next_urb)
336 break;
337 }
338 ep->next_urb = urb_index;
339 spin_unlock_irqrestore(&ep->buffer_lock, flags);
340}
341
342static void snd_usbmidi_out_tasklet(unsigned long data)
343{
344 struct snd_usb_midi_out_endpoint* ep = (struct snd_usb_midi_out_endpoint *) data;
345
346 snd_usbmidi_do_output(ep);
347}
348
349/* called after transfers had been interrupted due to some USB error */
350static void snd_usbmidi_error_timer(unsigned long data)
351{
352 struct snd_usb_midi *umidi = (struct snd_usb_midi *)data;
353 unsigned int i, j;
354
355 spin_lock(&umidi->disc_lock);
356 if (umidi->disconnected) {
357 spin_unlock(&umidi->disc_lock);
358 return;
359 }
360 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
361 struct snd_usb_midi_in_endpoint *in = umidi->endpoints[i].in;
362 if (in && in->error_resubmit) {
363 in->error_resubmit = 0;
364 for (j = 0; j < INPUT_URBS; ++j) {
365 in->urbs[j]->dev = umidi->dev;
366 snd_usbmidi_submit_urb(in->urbs[j], GFP_ATOMIC);
367 }
368 }
369 if (umidi->endpoints[i].out)
370 snd_usbmidi_do_output(umidi->endpoints[i].out);
371 }
372 spin_unlock(&umidi->disc_lock);
373}
374
375/* helper function to send static data that may not DMA-able */
376static int send_bulk_static_data(struct snd_usb_midi_out_endpoint* ep,
377 const void *data, int len)
378{
379 int err = 0;
380 void *buf = kmemdup(data, len, GFP_KERNEL);
381 if (!buf)
382 return -ENOMEM;
383 dump_urb("sending", buf, len);
384 if (ep->urbs[0].urb)
385 err = usb_bulk_msg(ep->umidi->dev, ep->urbs[0].urb->pipe,
386 buf, len, NULL, 250);
387 kfree(buf);
388 return err;
389}
390
391/*
392 * Standard USB MIDI protocol: see the spec.
393 * Midiman protocol: like the standard protocol, but the control byte is the
394 * fourth byte in each packet, and uses length instead of CIN.
395 */
396
397static void snd_usbmidi_standard_input(struct snd_usb_midi_in_endpoint* ep,
398 uint8_t* buffer, int buffer_length)
399{
400 int i;
401
402 for (i = 0; i + 3 < buffer_length; i += 4)
403 if (buffer[i] != 0) {
404 int cable = buffer[i] >> 4;
405 int length = snd_usbmidi_cin_length[buffer[i] & 0x0f];
406 snd_usbmidi_input_data(ep, cable, &buffer[i + 1], length);
407 }
408}
409
410static void snd_usbmidi_midiman_input(struct snd_usb_midi_in_endpoint* ep,
411 uint8_t* buffer, int buffer_length)
412{
413 int i;
414
415 for (i = 0; i + 3 < buffer_length; i += 4)
416 if (buffer[i + 3] != 0) {
417 int port = buffer[i + 3] >> 4;
418 int length = buffer[i + 3] & 3;
419 snd_usbmidi_input_data(ep, port, &buffer[i], length);
420 }
421}
422
423/*
424 * Buggy M-Audio device: running status on input results in a packet that has
425 * the data bytes but not the status byte and that is marked with CIN 4.
426 */
427static void snd_usbmidi_maudio_broken_running_status_input(
428 struct snd_usb_midi_in_endpoint* ep,
429 uint8_t* buffer, int buffer_length)
430{
431 int i;
432
433 for (i = 0; i + 3 < buffer_length; i += 4)
434 if (buffer[i] != 0) {
435 int cable = buffer[i] >> 4;
436 u8 cin = buffer[i] & 0x0f;
437 struct usbmidi_in_port *port = &ep->ports[cable];
438 int length;
439
440 length = snd_usbmidi_cin_length[cin];
441 if (cin == 0xf && buffer[i + 1] >= 0xf8)
442 ; /* realtime msg: no running status change */
443 else if (cin >= 0x8 && cin <= 0xe)
444 /* channel msg */
445 port->running_status_length = length - 1;
446 else if (cin == 0x4 &&
447 port->running_status_length != 0 &&
448 buffer[i + 1] < 0x80)
449 /* CIN 4 that is not a SysEx */
450 length = port->running_status_length;
451 else
452 /*
453 * All other msgs cannot begin running status.
454 * (A channel msg sent as two or three CIN 0xF
455 * packets could in theory, but this device
456 * doesn't use this format.)
457 */
458 port->running_status_length = 0;
459 snd_usbmidi_input_data(ep, cable, &buffer[i + 1], length);
460 }
461}
462
463/*
464 * CME protocol: like the standard protocol, but SysEx commands are sent as a
465 * single USB packet preceded by a 0x0F byte.
466 */
467static void snd_usbmidi_cme_input(struct snd_usb_midi_in_endpoint *ep,
468 uint8_t *buffer, int buffer_length)
469{
470 if (buffer_length < 2 || (buffer[0] & 0x0f) != 0x0f)
471 snd_usbmidi_standard_input(ep, buffer, buffer_length);
472 else
473 snd_usbmidi_input_data(ep, buffer[0] >> 4,
474 &buffer[1], buffer_length - 1);
475}
476
477/*
478 * Adds one USB MIDI packet to the output buffer.
479 */
480static void snd_usbmidi_output_standard_packet(struct urb* urb, uint8_t p0,
481 uint8_t p1, uint8_t p2, uint8_t p3)
482{
483
484 uint8_t* buf = (uint8_t*)urb->transfer_buffer + urb->transfer_buffer_length;
485 buf[0] = p0;
486 buf[1] = p1;
487 buf[2] = p2;
488 buf[3] = p3;
489 urb->transfer_buffer_length += 4;
490}
491
492/*
493 * Adds one Midiman packet to the output buffer.
494 */
495static void snd_usbmidi_output_midiman_packet(struct urb* urb, uint8_t p0,
496 uint8_t p1, uint8_t p2, uint8_t p3)
497{
498
499 uint8_t* buf = (uint8_t*)urb->transfer_buffer + urb->transfer_buffer_length;
500 buf[0] = p1;
501 buf[1] = p2;
502 buf[2] = p3;
503 buf[3] = (p0 & 0xf0) | snd_usbmidi_cin_length[p0 & 0x0f];
504 urb->transfer_buffer_length += 4;
505}
506
507/*
508 * Converts MIDI commands to USB MIDI packets.
509 */
510static void snd_usbmidi_transmit_byte(struct usbmidi_out_port* port,
511 uint8_t b, struct urb* urb)
512{
513 uint8_t p0 = port->cable;
514 void (*output_packet)(struct urb*, uint8_t, uint8_t, uint8_t, uint8_t) =
515 port->ep->umidi->usb_protocol_ops->output_packet;
516
517 if (b >= 0xf8) {
518 output_packet(urb, p0 | 0x0f, b, 0, 0);
519 } else if (b >= 0xf0) {
520 switch (b) {
521 case 0xf0:
522 port->data[0] = b;
523 port->state = STATE_SYSEX_1;
524 break;
525 case 0xf1:
526 case 0xf3:
527 port->data[0] = b;
528 port->state = STATE_1PARAM;
529 break;
530 case 0xf2:
531 port->data[0] = b;
532 port->state = STATE_2PARAM_1;
533 break;
534 case 0xf4:
535 case 0xf5:
536 port->state = STATE_UNKNOWN;
537 break;
538 case 0xf6:
539 output_packet(urb, p0 | 0x05, 0xf6, 0, 0);
540 port->state = STATE_UNKNOWN;
541 break;
542 case 0xf7:
543 switch (port->state) {
544 case STATE_SYSEX_0:
545 output_packet(urb, p0 | 0x05, 0xf7, 0, 0);
546 break;
547 case STATE_SYSEX_1:
548 output_packet(urb, p0 | 0x06, port->data[0], 0xf7, 0);
549 break;
550 case STATE_SYSEX_2:
551 output_packet(urb, p0 | 0x07, port->data[0], port->data[1], 0xf7);
552 break;
553 }
554 port->state = STATE_UNKNOWN;
555 break;
556 }
557 } else if (b >= 0x80) {
558 port->data[0] = b;
559 if (b >= 0xc0 && b <= 0xdf)
560 port->state = STATE_1PARAM;
561 else
562 port->state = STATE_2PARAM_1;
563 } else { /* b < 0x80 */
564 switch (port->state) {
565 case STATE_1PARAM:
566 if (port->data[0] < 0xf0) {
567 p0 |= port->data[0] >> 4;
568 } else {
569 p0 |= 0x02;
570 port->state = STATE_UNKNOWN;
571 }
572 output_packet(urb, p0, port->data[0], b, 0);
573 break;
574 case STATE_2PARAM_1:
575 port->data[1] = b;
576 port->state = STATE_2PARAM_2;
577 break;
578 case STATE_2PARAM_2:
579 if (port->data[0] < 0xf0) {
580 p0 |= port->data[0] >> 4;
581 port->state = STATE_2PARAM_1;
582 } else {
583 p0 |= 0x03;
584 port->state = STATE_UNKNOWN;
585 }
586 output_packet(urb, p0, port->data[0], port->data[1], b);
587 break;
588 case STATE_SYSEX_0:
589 port->data[0] = b;
590 port->state = STATE_SYSEX_1;
591 break;
592 case STATE_SYSEX_1:
593 port->data[1] = b;
594 port->state = STATE_SYSEX_2;
595 break;
596 case STATE_SYSEX_2:
597 output_packet(urb, p0 | 0x04, port->data[0], port->data[1], b);
598 port->state = STATE_SYSEX_0;
599 break;
600 }
601 }
602}
603
604static void snd_usbmidi_standard_output(struct snd_usb_midi_out_endpoint* ep,
605 struct urb *urb)
606{
607 int p;
608
609 /* FIXME: lower-numbered ports can starve higher-numbered ports */
610 for (p = 0; p < 0x10; ++p) {
611 struct usbmidi_out_port* port = &ep->ports[p];
612 if (!port->active)
613 continue;
614 while (urb->transfer_buffer_length + 3 < ep->max_transfer) {
615 uint8_t b;
616 if (snd_rawmidi_transmit(port->substream, &b, 1) != 1) {
617 port->active = 0;
618 break;
619 }
620 snd_usbmidi_transmit_byte(port, b, urb);
621 }
622 }
623}
624
625static struct usb_protocol_ops snd_usbmidi_standard_ops = {
626 .input = snd_usbmidi_standard_input,
627 .output = snd_usbmidi_standard_output,
628 .output_packet = snd_usbmidi_output_standard_packet,
629};
630
631static struct usb_protocol_ops snd_usbmidi_midiman_ops = {
632 .input = snd_usbmidi_midiman_input,
633 .output = snd_usbmidi_standard_output,
634 .output_packet = snd_usbmidi_output_midiman_packet,
635};
636
637static struct usb_protocol_ops snd_usbmidi_maudio_broken_running_status_ops = {
638 .input = snd_usbmidi_maudio_broken_running_status_input,
639 .output = snd_usbmidi_standard_output,
640 .output_packet = snd_usbmidi_output_standard_packet,
641};
642
643static struct usb_protocol_ops snd_usbmidi_cme_ops = {
644 .input = snd_usbmidi_cme_input,
645 .output = snd_usbmidi_standard_output,
646 .output_packet = snd_usbmidi_output_standard_packet,
647};
648
649/*
650 * AKAI MPD16 protocol:
651 *
652 * For control port (endpoint 1):
653 * ==============================
654 * One or more chunks consisting of first byte of (0x10 | msg_len) and then a
655 * SysEx message (msg_len=9 bytes long).
656 *
657 * For data port (endpoint 2):
658 * ===========================
659 * One or more chunks consisting of first byte of (0x20 | msg_len) and then a
660 * MIDI message (msg_len bytes long)
661 *
662 * Messages sent: Active Sense, Note On, Poly Pressure, Control Change.
663 */
664static void snd_usbmidi_akai_input(struct snd_usb_midi_in_endpoint *ep,
665 uint8_t *buffer, int buffer_length)
666{
667 unsigned int pos = 0;
668 unsigned int len = (unsigned int)buffer_length;
669 while (pos < len) {
670 unsigned int port = (buffer[pos] >> 4) - 1;
671 unsigned int msg_len = buffer[pos] & 0x0f;
672 pos++;
673 if (pos + msg_len <= len && port < 2)
674 snd_usbmidi_input_data(ep, 0, &buffer[pos], msg_len);
675 pos += msg_len;
676 }
677}
678
679#define MAX_AKAI_SYSEX_LEN 9
680
681static void snd_usbmidi_akai_output(struct snd_usb_midi_out_endpoint *ep,
682 struct urb *urb)
683{
684 uint8_t *msg;
685 int pos, end, count, buf_end;
686 uint8_t tmp[MAX_AKAI_SYSEX_LEN];
687 struct snd_rawmidi_substream *substream = ep->ports[0].substream;
688
689 if (!ep->ports[0].active)
690 return;
691
692 msg = urb->transfer_buffer + urb->transfer_buffer_length;
693 buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1;
694
695 /* only try adding more data when there's space for at least 1 SysEx */
696 while (urb->transfer_buffer_length < buf_end) {
697 count = snd_rawmidi_transmit_peek(substream,
698 tmp, MAX_AKAI_SYSEX_LEN);
699 if (!count) {
700 ep->ports[0].active = 0;
701 return;
702 }
703 /* try to skip non-SysEx data */
704 for (pos = 0; pos < count && tmp[pos] != 0xF0; pos++)
705 ;
706
707 if (pos > 0) {
708 snd_rawmidi_transmit_ack(substream, pos);
709 continue;
710 }
711
712 /* look for the start or end marker */
713 for (end = 1; end < count && tmp[end] < 0xF0; end++)
714 ;
715
716 /* next SysEx started before the end of current one */
717 if (end < count && tmp[end] == 0xF0) {
718 /* it's incomplete - drop it */
719 snd_rawmidi_transmit_ack(substream, end);
720 continue;
721 }
722 /* SysEx complete */
723 if (end < count && tmp[end] == 0xF7) {
724 /* queue it, ack it, and get the next one */
725 count = end + 1;
726 msg[0] = 0x10 | count;
727 memcpy(&msg[1], tmp, count);
728 snd_rawmidi_transmit_ack(substream, count);
729 urb->transfer_buffer_length += count + 1;
730 msg += count + 1;
731 continue;
732 }
733 /* less than 9 bytes and no end byte - wait for more */
734 if (count < MAX_AKAI_SYSEX_LEN) {
735 ep->ports[0].active = 0;
736 return;
737 }
738 /* 9 bytes and no end marker in sight - malformed, skip it */
739 snd_rawmidi_transmit_ack(substream, count);
740 }
741}
742
743static struct usb_protocol_ops snd_usbmidi_akai_ops = {
744 .input = snd_usbmidi_akai_input,
745 .output = snd_usbmidi_akai_output,
746};
747
748/*
749 * Novation USB MIDI protocol: number of data bytes is in the first byte
750 * (when receiving) (+1!) or in the second byte (when sending); data begins
751 * at the third byte.
752 */
753
754static void snd_usbmidi_novation_input(struct snd_usb_midi_in_endpoint* ep,
755 uint8_t* buffer, int buffer_length)
756{
757 if (buffer_length < 2 || !buffer[0] || buffer_length < buffer[0] + 1)
758 return;
759 snd_usbmidi_input_data(ep, 0, &buffer[2], buffer[0] - 1);
760}
761
762static void snd_usbmidi_novation_output(struct snd_usb_midi_out_endpoint* ep,
763 struct urb *urb)
764{
765 uint8_t* transfer_buffer;
766 int count;
767
768 if (!ep->ports[0].active)
769 return;
770 transfer_buffer = urb->transfer_buffer;
771 count = snd_rawmidi_transmit(ep->ports[0].substream,
772 &transfer_buffer[2],
773 ep->max_transfer - 2);
774 if (count < 1) {
775 ep->ports[0].active = 0;
776 return;
777 }
778 transfer_buffer[0] = 0;
779 transfer_buffer[1] = count;
780 urb->transfer_buffer_length = 2 + count;
781}
782
783static struct usb_protocol_ops snd_usbmidi_novation_ops = {
784 .input = snd_usbmidi_novation_input,
785 .output = snd_usbmidi_novation_output,
786};
787
788/*
789 * "raw" protocol: just move raw MIDI bytes from/to the endpoint
790 */
791
792static void snd_usbmidi_raw_input(struct snd_usb_midi_in_endpoint* ep,
793 uint8_t* buffer, int buffer_length)
794{
795 snd_usbmidi_input_data(ep, 0, buffer, buffer_length);
796}
797
798static void snd_usbmidi_raw_output(struct snd_usb_midi_out_endpoint* ep,
799 struct urb *urb)
800{
801 int count;
802
803 if (!ep->ports[0].active)
804 return;
805 count = snd_rawmidi_transmit(ep->ports[0].substream,
806 urb->transfer_buffer,
807 ep->max_transfer);
808 if (count < 1) {
809 ep->ports[0].active = 0;
810 return;
811 }
812 urb->transfer_buffer_length = count;
813}
814
815static struct usb_protocol_ops snd_usbmidi_raw_ops = {
816 .input = snd_usbmidi_raw_input,
817 .output = snd_usbmidi_raw_output,
818};
819
820/*
821 * FTDI protocol: raw MIDI bytes, but input packets have two modem status bytes.
822 */
823
824static void snd_usbmidi_ftdi_input(struct snd_usb_midi_in_endpoint* ep,
825 uint8_t* buffer, int buffer_length)
826{
827 if (buffer_length > 2)
828 snd_usbmidi_input_data(ep, 0, buffer + 2, buffer_length - 2);
829}
830
831static struct usb_protocol_ops snd_usbmidi_ftdi_ops = {
832 .input = snd_usbmidi_ftdi_input,
833 .output = snd_usbmidi_raw_output,
834};
835
836static void snd_usbmidi_us122l_input(struct snd_usb_midi_in_endpoint *ep,
837 uint8_t *buffer, int buffer_length)
838{
839 if (buffer_length != 9)
840 return;
841 buffer_length = 8;
842 while (buffer_length && buffer[buffer_length - 1] == 0xFD)
843 buffer_length--;
844 if (buffer_length)
845 snd_usbmidi_input_data(ep, 0, buffer, buffer_length);
846}
847
848static void snd_usbmidi_us122l_output(struct snd_usb_midi_out_endpoint *ep,
849 struct urb *urb)
850{
851 int count;
852
853 if (!ep->ports[0].active)
854 return;
855 switch (snd_usb_get_speed(ep->umidi->dev)) {
856 case USB_SPEED_HIGH:
857 case USB_SPEED_SUPER:
858 count = 1;
859 break;
860 default:
861 count = 2;
862 }
863 count = snd_rawmidi_transmit(ep->ports[0].substream,
864 urb->transfer_buffer,
865 count);
866 if (count < 1) {
867 ep->ports[0].active = 0;
868 return;
869 }
870
871 memset(urb->transfer_buffer + count, 0xFD, ep->max_transfer - count);
872 urb->transfer_buffer_length = ep->max_transfer;
873}
874
875static struct usb_protocol_ops snd_usbmidi_122l_ops = {
876 .input = snd_usbmidi_us122l_input,
877 .output = snd_usbmidi_us122l_output,
878};
879
880/*
881 * Emagic USB MIDI protocol: raw MIDI with "F5 xx" port switching.
882 */
883
884static void snd_usbmidi_emagic_init_out(struct snd_usb_midi_out_endpoint* ep)
885{
886 static const u8 init_data[] = {
887 /* initialization magic: "get version" */
888 0xf0,
889 0x00, 0x20, 0x31, /* Emagic */
890 0x64, /* Unitor8 */
891 0x0b, /* version number request */
892 0x00, /* command version */
893 0x00, /* EEPROM, box 0 */
894 0xf7
895 };
896 send_bulk_static_data(ep, init_data, sizeof(init_data));
897 /* while we're at it, pour on more magic */
898 send_bulk_static_data(ep, init_data, sizeof(init_data));
899}
900
901static void snd_usbmidi_emagic_finish_out(struct snd_usb_midi_out_endpoint* ep)
902{
903 static const u8 finish_data[] = {
904 /* switch to patch mode with last preset */
905 0xf0,
906 0x00, 0x20, 0x31, /* Emagic */
907 0x64, /* Unitor8 */
908 0x10, /* patch switch command */
909 0x00, /* command version */
910 0x7f, /* to all boxes */
911 0x40, /* last preset in EEPROM */
912 0xf7
913 };
914 send_bulk_static_data(ep, finish_data, sizeof(finish_data));
915}
916
917static void snd_usbmidi_emagic_input(struct snd_usb_midi_in_endpoint* ep,
918 uint8_t* buffer, int buffer_length)
919{
920 int i;
921
922 /* FF indicates end of valid data */
923 for (i = 0; i < buffer_length; ++i)
924 if (buffer[i] == 0xff) {
925 buffer_length = i;
926 break;
927 }
928
929 /* handle F5 at end of last buffer */
930 if (ep->seen_f5)
931 goto switch_port;
932
933 while (buffer_length > 0) {
934 /* determine size of data until next F5 */
935 for (i = 0; i < buffer_length; ++i)
936 if (buffer[i] == 0xf5)
937 break;
938 snd_usbmidi_input_data(ep, ep->current_port, buffer, i);
939 buffer += i;
940 buffer_length -= i;
941
942 if (buffer_length <= 0)
943 break;
944 /* assert(buffer[0] == 0xf5); */
945 ep->seen_f5 = 1;
946 ++buffer;
947 --buffer_length;
948
949 switch_port:
950 if (buffer_length <= 0)
951 break;
952 if (buffer[0] < 0x80) {
953 ep->current_port = (buffer[0] - 1) & 15;
954 ++buffer;
955 --buffer_length;
956 }
957 ep->seen_f5 = 0;
958 }
959}
960
961static void snd_usbmidi_emagic_output(struct snd_usb_midi_out_endpoint* ep,
962 struct urb *urb)
963{
964 int port0 = ep->current_port;
965 uint8_t* buf = urb->transfer_buffer;
966 int buf_free = ep->max_transfer;
967 int length, i;
968
969 for (i = 0; i < 0x10; ++i) {
970 /* round-robin, starting at the last current port */
971 int portnum = (port0 + i) & 15;
972 struct usbmidi_out_port* port = &ep->ports[portnum];
973
974 if (!port->active)
975 continue;
976 if (snd_rawmidi_transmit_peek(port->substream, buf, 1) != 1) {
977 port->active = 0;
978 continue;
979 }
980
981 if (portnum != ep->current_port) {
982 if (buf_free < 2)
983 break;
984 ep->current_port = portnum;
985 buf[0] = 0xf5;
986 buf[1] = (portnum + 1) & 15;
987 buf += 2;
988 buf_free -= 2;
989 }
990
991 if (buf_free < 1)
992 break;
993 length = snd_rawmidi_transmit(port->substream, buf, buf_free);
994 if (length > 0) {
995 buf += length;
996 buf_free -= length;
997 if (buf_free < 1)
998 break;
999 }
1000 }
1001 if (buf_free < ep->max_transfer && buf_free > 0) {
1002 *buf = 0xff;
1003 --buf_free;
1004 }
1005 urb->transfer_buffer_length = ep->max_transfer - buf_free;
1006}
1007
1008static struct usb_protocol_ops snd_usbmidi_emagic_ops = {
1009 .input = snd_usbmidi_emagic_input,
1010 .output = snd_usbmidi_emagic_output,
1011 .init_out_endpoint = snd_usbmidi_emagic_init_out,
1012 .finish_out_endpoint = snd_usbmidi_emagic_finish_out,
1013};
1014
1015
1016static void update_roland_altsetting(struct snd_usb_midi* umidi)
1017{
1018 struct usb_interface *intf;
1019 struct usb_host_interface *hostif;
1020 struct usb_interface_descriptor *intfd;
1021 int is_light_load;
1022
1023 intf = umidi->iface;
1024 is_light_load = intf->cur_altsetting != intf->altsetting;
1025 if (umidi->roland_load_ctl->private_value == is_light_load)
1026 return;
1027 hostif = &intf->altsetting[umidi->roland_load_ctl->private_value];
1028 intfd = get_iface_desc(hostif);
1029 snd_usbmidi_input_stop(&umidi->list);
1030 usb_set_interface(umidi->dev, intfd->bInterfaceNumber,
1031 intfd->bAlternateSetting);
1032 snd_usbmidi_input_start(&umidi->list);
1033}
1034
1035static void substream_open(struct snd_rawmidi_substream *substream, int open)
1036{
1037 struct snd_usb_midi* umidi = substream->rmidi->private_data;
1038 struct snd_kcontrol *ctl;
1039
1040 mutex_lock(&umidi->mutex);
1041 if (open) {
1042 if (umidi->opened++ == 0 && umidi->roland_load_ctl) {
1043 ctl = umidi->roland_load_ctl;
1044 ctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_INACTIVE;
1045 snd_ctl_notify(umidi->card,
1046 SNDRV_CTL_EVENT_MASK_INFO, &ctl->id);
1047 update_roland_altsetting(umidi);
1048 }
1049 } else {
1050 if (--umidi->opened == 0 && umidi->roland_load_ctl) {
1051 ctl = umidi->roland_load_ctl;
1052 ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE;
1053 snd_ctl_notify(umidi->card,
1054 SNDRV_CTL_EVENT_MASK_INFO, &ctl->id);
1055 }
1056 }
1057 mutex_unlock(&umidi->mutex);
1058}
1059
1060static int snd_usbmidi_output_open(struct snd_rawmidi_substream *substream)
1061{
1062 struct snd_usb_midi* umidi = substream->rmidi->private_data;
1063 struct usbmidi_out_port* port = NULL;
1064 int i, j;
1065 int err;
1066
1067 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i)
1068 if (umidi->endpoints[i].out)
1069 for (j = 0; j < 0x10; ++j)
1070 if (umidi->endpoints[i].out->ports[j].substream == substream) {
1071 port = &umidi->endpoints[i].out->ports[j];
1072 break;
1073 }
1074 if (!port) {
1075 snd_BUG();
1076 return -ENXIO;
1077 }
1078 err = usb_autopm_get_interface(umidi->iface);
1079 if (err < 0)
1080 return -EIO;
1081 substream->runtime->private_data = port;
1082 port->state = STATE_UNKNOWN;
1083 substream_open(substream, 1);
1084 return 0;
1085}
1086
1087static int snd_usbmidi_output_close(struct snd_rawmidi_substream *substream)
1088{
1089 struct snd_usb_midi* umidi = substream->rmidi->private_data;
1090
1091 substream_open(substream, 0);
1092 usb_autopm_put_interface(umidi->iface);
1093 return 0;
1094}
1095
1096static void snd_usbmidi_output_trigger(struct snd_rawmidi_substream *substream, int up)
1097{
1098 struct usbmidi_out_port* port = (struct usbmidi_out_port*)substream->runtime->private_data;
1099
1100 port->active = up;
1101 if (up) {
1102 if (port->ep->umidi->disconnected) {
1103 /* gobble up remaining bytes to prevent wait in
1104 * snd_rawmidi_drain_output */
1105 while (!snd_rawmidi_transmit_empty(substream))
1106 snd_rawmidi_transmit_ack(substream, 1);
1107 return;
1108 }
1109 tasklet_schedule(&port->ep->tasklet);
1110 }
1111}
1112
1113static void snd_usbmidi_output_drain(struct snd_rawmidi_substream *substream)
1114{
1115 struct usbmidi_out_port* port = substream->runtime->private_data;
1116 struct snd_usb_midi_out_endpoint *ep = port->ep;
1117 unsigned int drain_urbs;
1118 DEFINE_WAIT(wait);
1119 long timeout = msecs_to_jiffies(50);
1120
1121 if (ep->umidi->disconnected)
1122 return;
1123 /*
1124 * The substream buffer is empty, but some data might still be in the
1125 * currently active URBs, so we have to wait for those to complete.
1126 */
1127 spin_lock_irq(&ep->buffer_lock);
1128 drain_urbs = ep->active_urbs;
1129 if (drain_urbs) {
1130 ep->drain_urbs |= drain_urbs;
1131 do {
1132 prepare_to_wait(&ep->drain_wait, &wait,
1133 TASK_UNINTERRUPTIBLE);
1134 spin_unlock_irq(&ep->buffer_lock);
1135 timeout = schedule_timeout(timeout);
1136 spin_lock_irq(&ep->buffer_lock);
1137 drain_urbs &= ep->drain_urbs;
1138 } while (drain_urbs && timeout);
1139 finish_wait(&ep->drain_wait, &wait);
1140 }
1141 spin_unlock_irq(&ep->buffer_lock);
1142}
1143
1144static int snd_usbmidi_input_open(struct snd_rawmidi_substream *substream)
1145{
1146 substream_open(substream, 1);
1147 return 0;
1148}
1149
1150static int snd_usbmidi_input_close(struct snd_rawmidi_substream *substream)
1151{
1152 substream_open(substream, 0);
1153 return 0;
1154}
1155
1156static void snd_usbmidi_input_trigger(struct snd_rawmidi_substream *substream, int up)
1157{
1158 struct snd_usb_midi* umidi = substream->rmidi->private_data;
1159
1160 if (up)
1161 set_bit(substream->number, &umidi->input_triggered);
1162 else
1163 clear_bit(substream->number, &umidi->input_triggered);
1164}
1165
1166static struct snd_rawmidi_ops snd_usbmidi_output_ops = {
1167 .open = snd_usbmidi_output_open,
1168 .close = snd_usbmidi_output_close,
1169 .trigger = snd_usbmidi_output_trigger,
1170 .drain = snd_usbmidi_output_drain,
1171};
1172
1173static struct snd_rawmidi_ops snd_usbmidi_input_ops = {
1174 .open = snd_usbmidi_input_open,
1175 .close = snd_usbmidi_input_close,
1176 .trigger = snd_usbmidi_input_trigger
1177};
1178
1179static void free_urb_and_buffer(struct snd_usb_midi *umidi, struct urb *urb,
1180 unsigned int buffer_length)
1181{
1182 usb_free_coherent(umidi->dev, buffer_length,
1183 urb->transfer_buffer, urb->transfer_dma);
1184 usb_free_urb(urb);
1185}
1186
1187/*
1188 * Frees an input endpoint.
1189 * May be called when ep hasn't been initialized completely.
1190 */
1191static void snd_usbmidi_in_endpoint_delete(struct snd_usb_midi_in_endpoint* ep)
1192{
1193 unsigned int i;
1194
1195 for (i = 0; i < INPUT_URBS; ++i)
1196 if (ep->urbs[i])
1197 free_urb_and_buffer(ep->umidi, ep->urbs[i],
1198 ep->urbs[i]->transfer_buffer_length);
1199 kfree(ep);
1200}
1201
1202/*
1203 * Creates an input endpoint.
1204 */
1205static int snd_usbmidi_in_endpoint_create(struct snd_usb_midi* umidi,
1206 struct snd_usb_midi_endpoint_info* ep_info,
1207 struct snd_usb_midi_endpoint* rep)
1208{
1209 struct snd_usb_midi_in_endpoint* ep;
1210 void* buffer;
1211 unsigned int pipe;
1212 int length;
1213 unsigned int i;
1214
1215 rep->in = NULL;
1216 ep = kzalloc(sizeof(*ep), GFP_KERNEL);
1217 if (!ep)
1218 return -ENOMEM;
1219 ep->umidi = umidi;
1220
1221 for (i = 0; i < INPUT_URBS; ++i) {
1222 ep->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
1223 if (!ep->urbs[i]) {
1224 snd_usbmidi_in_endpoint_delete(ep);
1225 return -ENOMEM;
1226 }
1227 }
1228 if (ep_info->in_interval)
1229 pipe = usb_rcvintpipe(umidi->dev, ep_info->in_ep);
1230 else
1231 pipe = usb_rcvbulkpipe(umidi->dev, ep_info->in_ep);
1232 length = usb_maxpacket(umidi->dev, pipe, 0);
1233 for (i = 0; i < INPUT_URBS; ++i) {
1234 buffer = usb_alloc_coherent(umidi->dev, length, GFP_KERNEL,
1235 &ep->urbs[i]->transfer_dma);
1236 if (!buffer) {
1237 snd_usbmidi_in_endpoint_delete(ep);
1238 return -ENOMEM;
1239 }
1240 if (ep_info->in_interval)
1241 usb_fill_int_urb(ep->urbs[i], umidi->dev,
1242 pipe, buffer, length,
1243 snd_usbmidi_in_urb_complete,
1244 ep, ep_info->in_interval);
1245 else
1246 usb_fill_bulk_urb(ep->urbs[i], umidi->dev,
1247 pipe, buffer, length,
1248 snd_usbmidi_in_urb_complete, ep);
1249 ep->urbs[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
1250 }
1251
1252 rep->in = ep;
1253 return 0;
1254}
1255
1256/*
1257 * Frees an output endpoint.
1258 * May be called when ep hasn't been initialized completely.
1259 */
1260static void snd_usbmidi_out_endpoint_clear(struct snd_usb_midi_out_endpoint *ep)
1261{
1262 unsigned int i;
1263
1264 for (i = 0; i < OUTPUT_URBS; ++i)
1265 if (ep->urbs[i].urb) {
1266 free_urb_and_buffer(ep->umidi, ep->urbs[i].urb,
1267 ep->max_transfer);
1268 ep->urbs[i].urb = NULL;
1269 }
1270}
1271
1272static void snd_usbmidi_out_endpoint_delete(struct snd_usb_midi_out_endpoint *ep)
1273{
1274 snd_usbmidi_out_endpoint_clear(ep);
1275 kfree(ep);
1276}
1277
1278/*
1279 * Creates an output endpoint, and initializes output ports.
1280 */
1281static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi* umidi,
1282 struct snd_usb_midi_endpoint_info* ep_info,
1283 struct snd_usb_midi_endpoint* rep)
1284{
1285 struct snd_usb_midi_out_endpoint* ep;
1286 unsigned int i;
1287 unsigned int pipe;
1288 void* buffer;
1289
1290 rep->out = NULL;
1291 ep = kzalloc(sizeof(*ep), GFP_KERNEL);
1292 if (!ep)
1293 return -ENOMEM;
1294 ep->umidi = umidi;
1295
1296 for (i = 0; i < OUTPUT_URBS; ++i) {
1297 ep->urbs[i].urb = usb_alloc_urb(0, GFP_KERNEL);
1298 if (!ep->urbs[i].urb) {
1299 snd_usbmidi_out_endpoint_delete(ep);
1300 return -ENOMEM;
1301 }
1302 ep->urbs[i].ep = ep;
1303 }
1304 if (ep_info->out_interval)
1305 pipe = usb_sndintpipe(umidi->dev, ep_info->out_ep);
1306 else
1307 pipe = usb_sndbulkpipe(umidi->dev, ep_info->out_ep);
1308 switch (umidi->usb_id) {
1309 default:
1310 ep->max_transfer = usb_maxpacket(umidi->dev, pipe, 1);
1311 break;
1312 /*
1313 * Various chips declare a packet size larger than 4 bytes, but
1314 * do not actually work with larger packets:
1315 */
1316 case USB_ID(0x0a92, 0x1020): /* ESI M4U */
1317 case USB_ID(0x1430, 0x474b): /* RedOctane GH MIDI INTERFACE */
1318 case USB_ID(0x15ca, 0x0101): /* Textech USB Midi Cable */
1319 case USB_ID(0x15ca, 0x1806): /* Textech USB Midi Cable */
1320 case USB_ID(0x1a86, 0x752d): /* QinHeng CH345 "USB2.0-MIDI" */
1321 case USB_ID(0xfc08, 0x0101): /* Unknown vendor Cable */
1322 ep->max_transfer = 4;
1323 break;
1324 /*
1325 * Some devices only work with 9 bytes packet size:
1326 */
1327 case USB_ID(0x0644, 0x800E): /* Tascam US-122L */
1328 case USB_ID(0x0644, 0x800F): /* Tascam US-144 */
1329 ep->max_transfer = 9;
1330 break;
1331 }
1332 for (i = 0; i < OUTPUT_URBS; ++i) {
1333 buffer = usb_alloc_coherent(umidi->dev,
1334 ep->max_transfer, GFP_KERNEL,
1335 &ep->urbs[i].urb->transfer_dma);
1336 if (!buffer) {
1337 snd_usbmidi_out_endpoint_delete(ep);
1338 return -ENOMEM;
1339 }
1340 if (ep_info->out_interval)
1341 usb_fill_int_urb(ep->urbs[i].urb, umidi->dev,
1342 pipe, buffer, ep->max_transfer,
1343 snd_usbmidi_out_urb_complete,
1344 &ep->urbs[i], ep_info->out_interval);
1345 else
1346 usb_fill_bulk_urb(ep->urbs[i].urb, umidi->dev,
1347 pipe, buffer, ep->max_transfer,
1348 snd_usbmidi_out_urb_complete,
1349 &ep->urbs[i]);
1350 ep->urbs[i].urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
1351 }
1352
1353 spin_lock_init(&ep->buffer_lock);
1354 tasklet_init(&ep->tasklet, snd_usbmidi_out_tasklet, (unsigned long)ep);
1355 init_waitqueue_head(&ep->drain_wait);
1356
1357 for (i = 0; i < 0x10; ++i)
1358 if (ep_info->out_cables & (1 << i)) {
1359 ep->ports[i].ep = ep;
1360 ep->ports[i].cable = i << 4;
1361 }
1362
1363 if (umidi->usb_protocol_ops->init_out_endpoint)
1364 umidi->usb_protocol_ops->init_out_endpoint(ep);
1365
1366 rep->out = ep;
1367 return 0;
1368}
1369
1370/*
1371 * Frees everything.
1372 */
1373static void snd_usbmidi_free(struct snd_usb_midi* umidi)
1374{
1375 int i;
1376
1377 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
1378 struct snd_usb_midi_endpoint* ep = &umidi->endpoints[i];
1379 if (ep->out)
1380 snd_usbmidi_out_endpoint_delete(ep->out);
1381 if (ep->in)
1382 snd_usbmidi_in_endpoint_delete(ep->in);
1383 }
1384 mutex_destroy(&umidi->mutex);
1385 kfree(umidi);
1386}
1387
1388/*
1389 * Unlinks all URBs (must be done before the usb_device is deleted).
1390 */
1391void snd_usbmidi_disconnect(struct list_head* p)
1392{
1393 struct snd_usb_midi* umidi;
1394 unsigned int i, j;
1395
1396 umidi = list_entry(p, struct snd_usb_midi, list);
1397 /*
1398 * an URB's completion handler may start the timer and
1399 * a timer may submit an URB. To reliably break the cycle
1400 * a flag under lock must be used
1401 */
1402 spin_lock_irq(&umidi->disc_lock);
1403 umidi->disconnected = 1;
1404 spin_unlock_irq(&umidi->disc_lock);
1405 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
1406 struct snd_usb_midi_endpoint* ep = &umidi->endpoints[i];
1407 if (ep->out)
1408 tasklet_kill(&ep->out->tasklet);
1409 if (ep->out) {
1410 for (j = 0; j < OUTPUT_URBS; ++j)
1411 usb_kill_urb(ep->out->urbs[j].urb);
1412 if (umidi->usb_protocol_ops->finish_out_endpoint)
1413 umidi->usb_protocol_ops->finish_out_endpoint(ep->out);
1414 ep->out->active_urbs = 0;
1415 if (ep->out->drain_urbs) {
1416 ep->out->drain_urbs = 0;
1417 wake_up(&ep->out->drain_wait);
1418 }
1419 }
1420 if (ep->in)
1421 for (j = 0; j < INPUT_URBS; ++j)
1422 usb_kill_urb(ep->in->urbs[j]);
1423 /* free endpoints here; later call can result in Oops */
1424 if (ep->out)
1425 snd_usbmidi_out_endpoint_clear(ep->out);
1426 if (ep->in) {
1427 snd_usbmidi_in_endpoint_delete(ep->in);
1428 ep->in = NULL;
1429 }
1430 }
1431 del_timer_sync(&umidi->error_timer);
1432}
1433
1434static void snd_usbmidi_rawmidi_free(struct snd_rawmidi *rmidi)
1435{
1436 struct snd_usb_midi* umidi = rmidi->private_data;
1437 snd_usbmidi_free(umidi);
1438}
1439
1440static struct snd_rawmidi_substream *snd_usbmidi_find_substream(struct snd_usb_midi* umidi,
1441 int stream, int number)
1442{
1443 struct list_head* list;
1444
1445 list_for_each(list, &umidi->rmidi->streams[stream].substreams) {
1446 struct snd_rawmidi_substream *substream = list_entry(list, struct snd_rawmidi_substream, list);
1447 if (substream->number == number)
1448 return substream;
1449 }
1450 return NULL;
1451}
1452
1453/*
1454 * This list specifies names for ports that do not fit into the standard
1455 * "(product) MIDI (n)" schema because they aren't external MIDI ports,
1456 * such as internal control or synthesizer ports.
1457 */
1458static struct port_info {
1459 u32 id;
1460 short int port;
1461 short int voices;
1462 const char *name;
1463 unsigned int seq_flags;
1464} snd_usbmidi_port_info[] = {
1465#define PORT_INFO(vendor, product, num, name_, voices_, flags) \
1466 { .id = USB_ID(vendor, product), \
1467 .port = num, .voices = voices_, \
1468 .name = name_, .seq_flags = flags }
1469#define EXTERNAL_PORT(vendor, product, num, name) \
1470 PORT_INFO(vendor, product, num, name, 0, \
1471 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \
1472 SNDRV_SEQ_PORT_TYPE_HARDWARE | \
1473 SNDRV_SEQ_PORT_TYPE_PORT)
1474#define CONTROL_PORT(vendor, product, num, name) \
1475 PORT_INFO(vendor, product, num, name, 0, \
1476 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \
1477 SNDRV_SEQ_PORT_TYPE_HARDWARE)
1478#define ROLAND_SYNTH_PORT(vendor, product, num, name, voices) \
1479 PORT_INFO(vendor, product, num, name, voices, \
1480 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \
1481 SNDRV_SEQ_PORT_TYPE_MIDI_GM | \
1482 SNDRV_SEQ_PORT_TYPE_MIDI_GM2 | \
1483 SNDRV_SEQ_PORT_TYPE_MIDI_GS | \
1484 SNDRV_SEQ_PORT_TYPE_MIDI_XG | \
1485 SNDRV_SEQ_PORT_TYPE_HARDWARE | \
1486 SNDRV_SEQ_PORT_TYPE_SYNTHESIZER)
1487#define SOUNDCANVAS_PORT(vendor, product, num, name, voices) \
1488 PORT_INFO(vendor, product, num, name, voices, \
1489 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \
1490 SNDRV_SEQ_PORT_TYPE_MIDI_GM | \
1491 SNDRV_SEQ_PORT_TYPE_MIDI_GM2 | \
1492 SNDRV_SEQ_PORT_TYPE_MIDI_GS | \
1493 SNDRV_SEQ_PORT_TYPE_MIDI_XG | \
1494 SNDRV_SEQ_PORT_TYPE_MIDI_MT32 | \
1495 SNDRV_SEQ_PORT_TYPE_HARDWARE | \
1496 SNDRV_SEQ_PORT_TYPE_SYNTHESIZER)
1497 /* Roland UA-100 */
1498 CONTROL_PORT(0x0582, 0x0000, 2, "%s Control"),
1499 /* Roland SC-8850 */
1500 SOUNDCANVAS_PORT(0x0582, 0x0003, 0, "%s Part A", 128),
1501 SOUNDCANVAS_PORT(0x0582, 0x0003, 1, "%s Part B", 128),
1502 SOUNDCANVAS_PORT(0x0582, 0x0003, 2, "%s Part C", 128),
1503 SOUNDCANVAS_PORT(0x0582, 0x0003, 3, "%s Part D", 128),
1504 EXTERNAL_PORT(0x0582, 0x0003, 4, "%s MIDI 1"),
1505 EXTERNAL_PORT(0x0582, 0x0003, 5, "%s MIDI 2"),
1506 /* Roland U-8 */
1507 EXTERNAL_PORT(0x0582, 0x0004, 0, "%s MIDI"),
1508 CONTROL_PORT(0x0582, 0x0004, 1, "%s Control"),
1509 /* Roland SC-8820 */
1510 SOUNDCANVAS_PORT(0x0582, 0x0007, 0, "%s Part A", 64),
1511 SOUNDCANVAS_PORT(0x0582, 0x0007, 1, "%s Part B", 64),
1512 EXTERNAL_PORT(0x0582, 0x0007, 2, "%s MIDI"),
1513 /* Roland SK-500 */
1514 SOUNDCANVAS_PORT(0x0582, 0x000b, 0, "%s Part A", 64),
1515 SOUNDCANVAS_PORT(0x0582, 0x000b, 1, "%s Part B", 64),
1516 EXTERNAL_PORT(0x0582, 0x000b, 2, "%s MIDI"),
1517 /* Roland SC-D70 */
1518 SOUNDCANVAS_PORT(0x0582, 0x000c, 0, "%s Part A", 64),
1519 SOUNDCANVAS_PORT(0x0582, 0x000c, 1, "%s Part B", 64),
1520 EXTERNAL_PORT(0x0582, 0x000c, 2, "%s MIDI"),
1521 /* Edirol UM-880 */
1522 CONTROL_PORT(0x0582, 0x0014, 8, "%s Control"),
1523 /* Edirol SD-90 */
1524 ROLAND_SYNTH_PORT(0x0582, 0x0016, 0, "%s Part A", 128),
1525 ROLAND_SYNTH_PORT(0x0582, 0x0016, 1, "%s Part B", 128),
1526 EXTERNAL_PORT(0x0582, 0x0016, 2, "%s MIDI 1"),
1527 EXTERNAL_PORT(0x0582, 0x0016, 3, "%s MIDI 2"),
1528 /* Edirol UM-550 */
1529 CONTROL_PORT(0x0582, 0x0023, 5, "%s Control"),
1530 /* Edirol SD-20 */
1531 ROLAND_SYNTH_PORT(0x0582, 0x0027, 0, "%s Part A", 64),
1532 ROLAND_SYNTH_PORT(0x0582, 0x0027, 1, "%s Part B", 64),
1533 EXTERNAL_PORT(0x0582, 0x0027, 2, "%s MIDI"),
1534 /* Edirol SD-80 */
1535 ROLAND_SYNTH_PORT(0x0582, 0x0029, 0, "%s Part A", 128),
1536 ROLAND_SYNTH_PORT(0x0582, 0x0029, 1, "%s Part B", 128),
1537 EXTERNAL_PORT(0x0582, 0x0029, 2, "%s MIDI 1"),
1538 EXTERNAL_PORT(0x0582, 0x0029, 3, "%s MIDI 2"),
1539 /* Edirol UA-700 */
1540 EXTERNAL_PORT(0x0582, 0x002b, 0, "%s MIDI"),
1541 CONTROL_PORT(0x0582, 0x002b, 1, "%s Control"),
1542 /* Roland VariOS */
1543 EXTERNAL_PORT(0x0582, 0x002f, 0, "%s MIDI"),
1544 EXTERNAL_PORT(0x0582, 0x002f, 1, "%s External MIDI"),
1545 EXTERNAL_PORT(0x0582, 0x002f, 2, "%s Sync"),
1546 /* Edirol PCR */
1547 EXTERNAL_PORT(0x0582, 0x0033, 0, "%s MIDI"),
1548 EXTERNAL_PORT(0x0582, 0x0033, 1, "%s 1"),
1549 EXTERNAL_PORT(0x0582, 0x0033, 2, "%s 2"),
1550 /* BOSS GS-10 */
1551 EXTERNAL_PORT(0x0582, 0x003b, 0, "%s MIDI"),
1552 CONTROL_PORT(0x0582, 0x003b, 1, "%s Control"),
1553 /* Edirol UA-1000 */
1554 EXTERNAL_PORT(0x0582, 0x0044, 0, "%s MIDI"),
1555 CONTROL_PORT(0x0582, 0x0044, 1, "%s Control"),
1556 /* Edirol UR-80 */
1557 EXTERNAL_PORT(0x0582, 0x0048, 0, "%s MIDI"),
1558 EXTERNAL_PORT(0x0582, 0x0048, 1, "%s 1"),
1559 EXTERNAL_PORT(0x0582, 0x0048, 2, "%s 2"),
1560 /* Edirol PCR-A */
1561 EXTERNAL_PORT(0x0582, 0x004d, 0, "%s MIDI"),
1562 EXTERNAL_PORT(0x0582, 0x004d, 1, "%s 1"),
1563 EXTERNAL_PORT(0x0582, 0x004d, 2, "%s 2"),
1564 /* Edirol UM-3EX */
1565 CONTROL_PORT(0x0582, 0x009a, 3, "%s Control"),
1566 /* M-Audio MidiSport 8x8 */
1567 CONTROL_PORT(0x0763, 0x1031, 8, "%s Control"),
1568 CONTROL_PORT(0x0763, 0x1033, 8, "%s Control"),
1569 /* MOTU Fastlane */
1570 EXTERNAL_PORT(0x07fd, 0x0001, 0, "%s MIDI A"),
1571 EXTERNAL_PORT(0x07fd, 0x0001, 1, "%s MIDI B"),
1572 /* Emagic Unitor8/AMT8/MT4 */
1573 EXTERNAL_PORT(0x086a, 0x0001, 8, "%s Broadcast"),
1574 EXTERNAL_PORT(0x086a, 0x0002, 8, "%s Broadcast"),
1575 EXTERNAL_PORT(0x086a, 0x0003, 4, "%s Broadcast"),
1576 /* Akai MPD16 */
1577 CONTROL_PORT(0x09e8, 0x0062, 0, "%s Control"),
1578 PORT_INFO(0x09e8, 0x0062, 1, "%s MIDI", 0,
1579 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC |
1580 SNDRV_SEQ_PORT_TYPE_HARDWARE),
1581 /* Access Music Virus TI */
1582 EXTERNAL_PORT(0x133e, 0x0815, 0, "%s MIDI"),
1583 PORT_INFO(0x133e, 0x0815, 1, "%s Synth", 0,
1584 SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC |
1585 SNDRV_SEQ_PORT_TYPE_HARDWARE |
1586 SNDRV_SEQ_PORT_TYPE_SYNTHESIZER),
1587};
1588
1589static struct port_info *find_port_info(struct snd_usb_midi* umidi, int number)
1590{
1591 int i;
1592
1593 for (i = 0; i < ARRAY_SIZE(snd_usbmidi_port_info); ++i) {
1594 if (snd_usbmidi_port_info[i].id == umidi->usb_id &&
1595 snd_usbmidi_port_info[i].port == number)
1596 return &snd_usbmidi_port_info[i];
1597 }
1598 return NULL;
1599}
1600
1601static void snd_usbmidi_get_port_info(struct snd_rawmidi *rmidi, int number,
1602 struct snd_seq_port_info *seq_port_info)
1603{
1604 struct snd_usb_midi *umidi = rmidi->private_data;
1605 struct port_info *port_info;
1606
1607 /* TODO: read port flags from descriptors */
1608 port_info = find_port_info(umidi, number);
1609 if (port_info) {
1610 seq_port_info->type = port_info->seq_flags;
1611 seq_port_info->midi_voices = port_info->voices;
1612 }
1613}
1614
1615static void snd_usbmidi_init_substream(struct snd_usb_midi* umidi,
1616 int stream, int number,
1617 struct snd_rawmidi_substream ** rsubstream)
1618{
1619 struct port_info *port_info;
1620 const char *name_format;
1621
1622 struct snd_rawmidi_substream *substream = snd_usbmidi_find_substream(umidi, stream, number);
1623 if (!substream) {
1624 snd_printd(KERN_ERR "substream %d:%d not found\n", stream, number);
1625 return;
1626 }
1627
1628 /* TODO: read port name from jack descriptor */
1629 port_info = find_port_info(umidi, number);
1630 name_format = port_info ? port_info->name : "%s MIDI %d";
1631 snprintf(substream->name, sizeof(substream->name),
1632 name_format, umidi->card->shortname, number + 1);
1633
1634 *rsubstream = substream;
1635}
1636
1637/*
1638 * Creates the endpoints and their ports.
1639 */
1640static int snd_usbmidi_create_endpoints(struct snd_usb_midi* umidi,
1641 struct snd_usb_midi_endpoint_info* endpoints)
1642{
1643 int i, j, err;
1644 int out_ports = 0, in_ports = 0;
1645
1646 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
1647 if (endpoints[i].out_cables) {
1648 err = snd_usbmidi_out_endpoint_create(umidi, &endpoints[i],
1649 &umidi->endpoints[i]);
1650 if (err < 0)
1651 return err;
1652 }
1653 if (endpoints[i].in_cables) {
1654 err = snd_usbmidi_in_endpoint_create(umidi, &endpoints[i],
1655 &umidi->endpoints[i]);
1656 if (err < 0)
1657 return err;
1658 }
1659
1660 for (j = 0; j < 0x10; ++j) {
1661 if (endpoints[i].out_cables & (1 << j)) {
1662 snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_OUTPUT, out_ports,
1663 &umidi->endpoints[i].out->ports[j].substream);
1664 ++out_ports;
1665 }
1666 if (endpoints[i].in_cables & (1 << j)) {
1667 snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_INPUT, in_ports,
1668 &umidi->endpoints[i].in->ports[j].substream);
1669 ++in_ports;
1670 }
1671 }
1672 }
1673 snd_printdd(KERN_INFO "created %d output and %d input ports\n",
1674 out_ports, in_ports);
1675 return 0;
1676}
1677
1678/*
1679 * Returns MIDIStreaming device capabilities.
1680 */
1681static int snd_usbmidi_get_ms_info(struct snd_usb_midi* umidi,
1682 struct snd_usb_midi_endpoint_info* endpoints)
1683{
1684 struct usb_interface* intf;
1685 struct usb_host_interface *hostif;
1686 struct usb_interface_descriptor* intfd;
1687 struct usb_ms_header_descriptor* ms_header;
1688 struct usb_host_endpoint *hostep;
1689 struct usb_endpoint_descriptor* ep;
1690 struct usb_ms_endpoint_descriptor* ms_ep;
1691 int i, epidx;
1692
1693 intf = umidi->iface;
1694 if (!intf)
1695 return -ENXIO;
1696 hostif = &intf->altsetting[0];
1697 intfd = get_iface_desc(hostif);
1698 ms_header = (struct usb_ms_header_descriptor*)hostif->extra;
1699 if (hostif->extralen >= 7 &&
1700 ms_header->bLength >= 7 &&
1701 ms_header->bDescriptorType == USB_DT_CS_INTERFACE &&
1702 ms_header->bDescriptorSubtype == UAC_HEADER)
1703 snd_printdd(KERN_INFO "MIDIStreaming version %02x.%02x\n",
1704 ms_header->bcdMSC[1], ms_header->bcdMSC[0]);
1705 else
1706 snd_printk(KERN_WARNING "MIDIStreaming interface descriptor not found\n");
1707
1708 epidx = 0;
1709 for (i = 0; i < intfd->bNumEndpoints; ++i) {
1710 hostep = &hostif->endpoint[i];
1711 ep = get_ep_desc(hostep);
1712 if (!usb_endpoint_xfer_bulk(ep) && !usb_endpoint_xfer_int(ep))
1713 continue;
1714 ms_ep = (struct usb_ms_endpoint_descriptor*)hostep->extra;
1715 if (hostep->extralen < 4 ||
1716 ms_ep->bLength < 4 ||
1717 ms_ep->bDescriptorType != USB_DT_CS_ENDPOINT ||
1718 ms_ep->bDescriptorSubtype != UAC_MS_GENERAL)
1719 continue;
1720 if (usb_endpoint_dir_out(ep)) {
1721 if (endpoints[epidx].out_ep) {
1722 if (++epidx >= MIDI_MAX_ENDPOINTS) {
1723 snd_printk(KERN_WARNING "too many endpoints\n");
1724 break;
1725 }
1726 }
1727 endpoints[epidx].out_ep = usb_endpoint_num(ep);
1728 if (usb_endpoint_xfer_int(ep))
1729 endpoints[epidx].out_interval = ep->bInterval;
1730 else if (snd_usb_get_speed(umidi->dev) == USB_SPEED_LOW)
1731 /*
1732 * Low speed bulk transfers don't exist, so
1733 * force interrupt transfers for devices like
1734 * ESI MIDI Mate that try to use them anyway.
1735 */
1736 endpoints[epidx].out_interval = 1;
1737 endpoints[epidx].out_cables = (1 << ms_ep->bNumEmbMIDIJack) - 1;
1738 snd_printdd(KERN_INFO "EP %02X: %d jack(s)\n",
1739 ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack);
1740 } else {
1741 if (endpoints[epidx].in_ep) {
1742 if (++epidx >= MIDI_MAX_ENDPOINTS) {
1743 snd_printk(KERN_WARNING "too many endpoints\n");
1744 break;
1745 }
1746 }
1747 endpoints[epidx].in_ep = usb_endpoint_num(ep);
1748 if (usb_endpoint_xfer_int(ep))
1749 endpoints[epidx].in_interval = ep->bInterval;
1750 else if (snd_usb_get_speed(umidi->dev) == USB_SPEED_LOW)
1751 endpoints[epidx].in_interval = 1;
1752 endpoints[epidx].in_cables = (1 << ms_ep->bNumEmbMIDIJack) - 1;
1753 snd_printdd(KERN_INFO "EP %02X: %d jack(s)\n",
1754 ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack);
1755 }
1756 }
1757 return 0;
1758}
1759
1760static int roland_load_info(struct snd_kcontrol *kcontrol,
1761 struct snd_ctl_elem_info *info)
1762{
1763 static const char *const names[] = { "High Load", "Light Load" };
1764
1765 return snd_ctl_enum_info(info, 1, 2, names);
1766}
1767
1768static int roland_load_get(struct snd_kcontrol *kcontrol,
1769 struct snd_ctl_elem_value *value)
1770{
1771 value->value.enumerated.item[0] = kcontrol->private_value;
1772 return 0;
1773}
1774
1775static int roland_load_put(struct snd_kcontrol *kcontrol,
1776 struct snd_ctl_elem_value *value)
1777{
1778 struct snd_usb_midi* umidi = kcontrol->private_data;
1779 int changed;
1780
1781 if (value->value.enumerated.item[0] > 1)
1782 return -EINVAL;
1783 mutex_lock(&umidi->mutex);
1784 changed = value->value.enumerated.item[0] != kcontrol->private_value;
1785 if (changed)
1786 kcontrol->private_value = value->value.enumerated.item[0];
1787 mutex_unlock(&umidi->mutex);
1788 return changed;
1789}
1790
1791static struct snd_kcontrol_new roland_load_ctl = {
1792 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
1793 .name = "MIDI Input Mode",
1794 .info = roland_load_info,
1795 .get = roland_load_get,
1796 .put = roland_load_put,
1797 .private_value = 1,
1798};
1799
1800/*
1801 * On Roland devices, use the second alternate setting to be able to use
1802 * the interrupt input endpoint.
1803 */
1804static void snd_usbmidi_switch_roland_altsetting(struct snd_usb_midi* umidi)
1805{
1806 struct usb_interface* intf;
1807 struct usb_host_interface *hostif;
1808 struct usb_interface_descriptor* intfd;
1809
1810 intf = umidi->iface;
1811 if (!intf || intf->num_altsetting != 2)
1812 return;
1813
1814 hostif = &intf->altsetting[1];
1815 intfd = get_iface_desc(hostif);
1816 if (intfd->bNumEndpoints != 2 ||
1817 (get_endpoint(hostif, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK ||
1818 (get_endpoint(hostif, 1)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
1819 return;
1820
1821 snd_printdd(KERN_INFO "switching to altsetting %d with int ep\n",
1822 intfd->bAlternateSetting);
1823 usb_set_interface(umidi->dev, intfd->bInterfaceNumber,
1824 intfd->bAlternateSetting);
1825
1826 umidi->roland_load_ctl = snd_ctl_new1(&roland_load_ctl, umidi);
1827 if (snd_ctl_add(umidi->card, umidi->roland_load_ctl) < 0)
1828 umidi->roland_load_ctl = NULL;
1829}
1830
1831/*
1832 * Try to find any usable endpoints in the interface.
1833 */
1834static int snd_usbmidi_detect_endpoints(struct snd_usb_midi* umidi,
1835 struct snd_usb_midi_endpoint_info* endpoint,
1836 int max_endpoints)
1837{
1838 struct usb_interface* intf;
1839 struct usb_host_interface *hostif;
1840 struct usb_interface_descriptor* intfd;
1841 struct usb_endpoint_descriptor* epd;
1842 int i, out_eps = 0, in_eps = 0;
1843
1844 if (USB_ID_VENDOR(umidi->usb_id) == 0x0582)
1845 snd_usbmidi_switch_roland_altsetting(umidi);
1846
1847 if (endpoint[0].out_ep || endpoint[0].in_ep)
1848 return 0;
1849
1850 intf = umidi->iface;
1851 if (!intf || intf->num_altsetting < 1)
1852 return -ENOENT;
1853 hostif = intf->cur_altsetting;
1854 intfd = get_iface_desc(hostif);
1855
1856 for (i = 0; i < intfd->bNumEndpoints; ++i) {
1857 epd = get_endpoint(hostif, i);
1858 if (!usb_endpoint_xfer_bulk(epd) &&
1859 !usb_endpoint_xfer_int(epd))
1860 continue;
1861 if (out_eps < max_endpoints &&
1862 usb_endpoint_dir_out(epd)) {
1863 endpoint[out_eps].out_ep = usb_endpoint_num(epd);
1864 if (usb_endpoint_xfer_int(epd))
1865 endpoint[out_eps].out_interval = epd->bInterval;
1866 ++out_eps;
1867 }
1868 if (in_eps < max_endpoints &&
1869 usb_endpoint_dir_in(epd)) {
1870 endpoint[in_eps].in_ep = usb_endpoint_num(epd);
1871 if (usb_endpoint_xfer_int(epd))
1872 endpoint[in_eps].in_interval = epd->bInterval;
1873 ++in_eps;
1874 }
1875 }
1876 return (out_eps || in_eps) ? 0 : -ENOENT;
1877}
1878
1879/*
1880 * Detects the endpoints for one-port-per-endpoint protocols.
1881 */
1882static int snd_usbmidi_detect_per_port_endpoints(struct snd_usb_midi* umidi,
1883 struct snd_usb_midi_endpoint_info* endpoints)
1884{
1885 int err, i;
1886
1887 err = snd_usbmidi_detect_endpoints(umidi, endpoints, MIDI_MAX_ENDPOINTS);
1888 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
1889 if (endpoints[i].out_ep)
1890 endpoints[i].out_cables = 0x0001;
1891 if (endpoints[i].in_ep)
1892 endpoints[i].in_cables = 0x0001;
1893 }
1894 return err;
1895}
1896
1897/*
1898 * Detects the endpoints and ports of Yamaha devices.
1899 */
1900static int snd_usbmidi_detect_yamaha(struct snd_usb_midi* umidi,
1901 struct snd_usb_midi_endpoint_info* endpoint)
1902{
1903 struct usb_interface* intf;
1904 struct usb_host_interface *hostif;
1905 struct usb_interface_descriptor* intfd;
1906 uint8_t* cs_desc;
1907
1908 intf = umidi->iface;
1909 if (!intf)
1910 return -ENOENT;
1911 hostif = intf->altsetting;
1912 intfd = get_iface_desc(hostif);
1913 if (intfd->bNumEndpoints < 1)
1914 return -ENOENT;
1915
1916 /*
1917 * For each port there is one MIDI_IN/OUT_JACK descriptor, not
1918 * necessarily with any useful contents. So simply count 'em.
1919 */
1920 for (cs_desc = hostif->extra;
1921 cs_desc < hostif->extra + hostif->extralen && cs_desc[0] >= 2;
1922 cs_desc += cs_desc[0]) {
1923 if (cs_desc[1] == USB_DT_CS_INTERFACE) {
1924 if (cs_desc[2] == UAC_MIDI_IN_JACK)
1925 endpoint->in_cables = (endpoint->in_cables << 1) | 1;
1926 else if (cs_desc[2] == UAC_MIDI_OUT_JACK)
1927 endpoint->out_cables = (endpoint->out_cables << 1) | 1;
1928 }
1929 }
1930 if (!endpoint->in_cables && !endpoint->out_cables)
1931 return -ENOENT;
1932
1933 return snd_usbmidi_detect_endpoints(umidi, endpoint, 1);
1934}
1935
1936/*
1937 * Creates the endpoints and their ports for Midiman devices.
1938 */
1939static int snd_usbmidi_create_endpoints_midiman(struct snd_usb_midi* umidi,
1940 struct snd_usb_midi_endpoint_info* endpoint)
1941{
1942 struct snd_usb_midi_endpoint_info ep_info;
1943 struct usb_interface* intf;
1944 struct usb_host_interface *hostif;
1945 struct usb_interface_descriptor* intfd;
1946 struct usb_endpoint_descriptor* epd;
1947 int cable, err;
1948
1949 intf = umidi->iface;
1950 if (!intf)
1951 return -ENOENT;
1952 hostif = intf->altsetting;
1953 intfd = get_iface_desc(hostif);
1954 /*
1955 * The various MidiSport devices have more or less random endpoint
1956 * numbers, so we have to identify the endpoints by their index in
1957 * the descriptor array, like the driver for that other OS does.
1958 *
1959 * There is one interrupt input endpoint for all input ports, one
1960 * bulk output endpoint for even-numbered ports, and one for odd-
1961 * numbered ports. Both bulk output endpoints have corresponding
1962 * input bulk endpoints (at indices 1 and 3) which aren't used.
1963 */
1964 if (intfd->bNumEndpoints < (endpoint->out_cables > 0x0001 ? 5 : 3)) {
1965 snd_printdd(KERN_ERR "not enough endpoints\n");
1966 return -ENOENT;
1967 }
1968
1969 epd = get_endpoint(hostif, 0);
1970 if (!usb_endpoint_dir_in(epd) || !usb_endpoint_xfer_int(epd)) {
1971 snd_printdd(KERN_ERR "endpoint[0] isn't interrupt\n");
1972 return -ENXIO;
1973 }
1974 epd = get_endpoint(hostif, 2);
1975 if (!usb_endpoint_dir_out(epd) || !usb_endpoint_xfer_bulk(epd)) {
1976 snd_printdd(KERN_ERR "endpoint[2] isn't bulk output\n");
1977 return -ENXIO;
1978 }
1979 if (endpoint->out_cables > 0x0001) {
1980 epd = get_endpoint(hostif, 4);
1981 if (!usb_endpoint_dir_out(epd) ||
1982 !usb_endpoint_xfer_bulk(epd)) {
1983 snd_printdd(KERN_ERR "endpoint[4] isn't bulk output\n");
1984 return -ENXIO;
1985 }
1986 }
1987
1988 ep_info.out_ep = get_endpoint(hostif, 2)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
1989 ep_info.out_interval = 0;
1990 ep_info.out_cables = endpoint->out_cables & 0x5555;
1991 err = snd_usbmidi_out_endpoint_create(umidi, &ep_info, &umidi->endpoints[0]);
1992 if (err < 0)
1993 return err;
1994
1995 ep_info.in_ep = get_endpoint(hostif, 0)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
1996 ep_info.in_interval = get_endpoint(hostif, 0)->bInterval;
1997 ep_info.in_cables = endpoint->in_cables;
1998 err = snd_usbmidi_in_endpoint_create(umidi, &ep_info, &umidi->endpoints[0]);
1999 if (err < 0)
2000 return err;
2001
2002 if (endpoint->out_cables > 0x0001) {
2003 ep_info.out_ep = get_endpoint(hostif, 4)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
2004 ep_info.out_cables = endpoint->out_cables & 0xaaaa;
2005 err = snd_usbmidi_out_endpoint_create(umidi, &ep_info, &umidi->endpoints[1]);
2006 if (err < 0)
2007 return err;
2008 }
2009
2010 for (cable = 0; cable < 0x10; ++cable) {
2011 if (endpoint->out_cables & (1 << cable))
2012 snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_OUTPUT, cable,
2013 &umidi->endpoints[cable & 1].out->ports[cable].substream);
2014 if (endpoint->in_cables & (1 << cable))
2015 snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_INPUT, cable,
2016 &umidi->endpoints[0].in->ports[cable].substream);
2017 }
2018 return 0;
2019}
2020
2021static struct snd_rawmidi_global_ops snd_usbmidi_ops = {
2022 .get_port_info = snd_usbmidi_get_port_info,
2023};
2024
2025static int snd_usbmidi_create_rawmidi(struct snd_usb_midi* umidi,
2026 int out_ports, int in_ports)
2027{
2028 struct snd_rawmidi *rmidi;
2029 int err;
2030
2031 err = snd_rawmidi_new(umidi->card, "USB MIDI",
2032 umidi->next_midi_device++,
2033 out_ports, in_ports, &rmidi);
2034 if (err < 0)
2035 return err;
2036 strcpy(rmidi->name, umidi->card->shortname);
2037 rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
2038 SNDRV_RAWMIDI_INFO_INPUT |
2039 SNDRV_RAWMIDI_INFO_DUPLEX;
2040 rmidi->ops = &snd_usbmidi_ops;
2041 rmidi->private_data = umidi;
2042 rmidi->private_free = snd_usbmidi_rawmidi_free;
2043 snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &snd_usbmidi_output_ops);
2044 snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &snd_usbmidi_input_ops);
2045
2046 umidi->rmidi = rmidi;
2047 return 0;
2048}
2049
2050/*
2051 * Temporarily stop input.
2052 */
2053void snd_usbmidi_input_stop(struct list_head* p)
2054{
2055 struct snd_usb_midi* umidi;
2056 unsigned int i, j;
2057
2058 umidi = list_entry(p, struct snd_usb_midi, list);
2059 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
2060 struct snd_usb_midi_endpoint* ep = &umidi->endpoints[i];
2061 if (ep->in)
2062 for (j = 0; j < INPUT_URBS; ++j)
2063 usb_kill_urb(ep->in->urbs[j]);
2064 }
2065}
2066
2067static void snd_usbmidi_input_start_ep(struct snd_usb_midi_in_endpoint* ep)
2068{
2069 unsigned int i;
2070
2071 if (!ep)
2072 return;
2073 for (i = 0; i < INPUT_URBS; ++i) {
2074 struct urb* urb = ep->urbs[i];
2075 urb->dev = ep->umidi->dev;
2076 snd_usbmidi_submit_urb(urb, GFP_KERNEL);
2077 }
2078}
2079
2080/*
2081 * Resume input after a call to snd_usbmidi_input_stop().
2082 */
2083void snd_usbmidi_input_start(struct list_head* p)
2084{
2085 struct snd_usb_midi* umidi;
2086 int i;
2087
2088 umidi = list_entry(p, struct snd_usb_midi, list);
2089 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i)
2090 snd_usbmidi_input_start_ep(umidi->endpoints[i].in);
2091}
2092
2093/*
2094 * Creates and registers everything needed for a MIDI streaming interface.
2095 */
2096int snd_usbmidi_create(struct snd_card *card,
2097 struct usb_interface* iface,
2098 struct list_head *midi_list,
2099 const struct snd_usb_audio_quirk* quirk)
2100{
2101 struct snd_usb_midi* umidi;
2102 struct snd_usb_midi_endpoint_info endpoints[MIDI_MAX_ENDPOINTS];
2103 int out_ports, in_ports;
2104 int i, err;
2105
2106 umidi = kzalloc(sizeof(*umidi), GFP_KERNEL);
2107 if (!umidi)
2108 return -ENOMEM;
2109 umidi->dev = interface_to_usbdev(iface);
2110 umidi->card = card;
2111 umidi->iface = iface;
2112 umidi->quirk = quirk;
2113 umidi->usb_protocol_ops = &snd_usbmidi_standard_ops;
2114 init_timer(&umidi->error_timer);
2115 spin_lock_init(&umidi->disc_lock);
2116 mutex_init(&umidi->mutex);
2117 umidi->usb_id = USB_ID(le16_to_cpu(umidi->dev->descriptor.idVendor),
2118 le16_to_cpu(umidi->dev->descriptor.idProduct));
2119 umidi->error_timer.function = snd_usbmidi_error_timer;
2120 umidi->error_timer.data = (unsigned long)umidi;
2121
2122 /* detect the endpoint(s) to use */
2123 memset(endpoints, 0, sizeof(endpoints));
2124 switch (quirk ? quirk->type : QUIRK_MIDI_STANDARD_INTERFACE) {
2125 case QUIRK_MIDI_STANDARD_INTERFACE:
2126 err = snd_usbmidi_get_ms_info(umidi, endpoints);
2127 if (umidi->usb_id == USB_ID(0x0763, 0x0150)) /* M-Audio Uno */
2128 umidi->usb_protocol_ops =
2129 &snd_usbmidi_maudio_broken_running_status_ops;
2130 break;
2131 case QUIRK_MIDI_US122L:
2132 umidi->usb_protocol_ops = &snd_usbmidi_122l_ops;
2133 /* fall through */
2134 case QUIRK_MIDI_FIXED_ENDPOINT:
2135 memcpy(&endpoints[0], quirk->data,
2136 sizeof(struct snd_usb_midi_endpoint_info));
2137 err = snd_usbmidi_detect_endpoints(umidi, &endpoints[0], 1);
2138 break;
2139 case QUIRK_MIDI_YAMAHA:
2140 err = snd_usbmidi_detect_yamaha(umidi, &endpoints[0]);
2141 break;
2142 case QUIRK_MIDI_MIDIMAN:
2143 umidi->usb_protocol_ops = &snd_usbmidi_midiman_ops;
2144 memcpy(&endpoints[0], quirk->data,
2145 sizeof(struct snd_usb_midi_endpoint_info));
2146 err = 0;
2147 break;
2148 case QUIRK_MIDI_NOVATION:
2149 umidi->usb_protocol_ops = &snd_usbmidi_novation_ops;
2150 err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
2151 break;
2152 case QUIRK_MIDI_RAW_BYTES:
2153 umidi->usb_protocol_ops = &snd_usbmidi_raw_ops;
2154 /*
2155 * Interface 1 contains isochronous endpoints, but with the same
2156 * numbers as in interface 0. Since it is interface 1 that the
2157 * USB core has most recently seen, these descriptors are now
2158 * associated with the endpoint numbers. This will foul up our
2159 * attempts to submit bulk/interrupt URBs to the endpoints in
2160 * interface 0, so we have to make sure that the USB core looks
2161 * again at interface 0 by calling usb_set_interface() on it.
2162 */
2163 if (umidi->usb_id == USB_ID(0x07fd, 0x0001)) /* MOTU Fastlane */
2164 usb_set_interface(umidi->dev, 0, 0);
2165 err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
2166 break;
2167 case QUIRK_MIDI_EMAGIC:
2168 umidi->usb_protocol_ops = &snd_usbmidi_emagic_ops;
2169 memcpy(&endpoints[0], quirk->data,
2170 sizeof(struct snd_usb_midi_endpoint_info));
2171 err = snd_usbmidi_detect_endpoints(umidi, &endpoints[0], 1);
2172 break;
2173 case QUIRK_MIDI_CME:
2174 umidi->usb_protocol_ops = &snd_usbmidi_cme_ops;
2175 err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
2176 break;
2177 case QUIRK_MIDI_AKAI:
2178 umidi->usb_protocol_ops = &snd_usbmidi_akai_ops;
2179 err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
2180 /* endpoint 1 is input-only */
2181 endpoints[1].out_cables = 0;
2182 break;
2183 case QUIRK_MIDI_FTDI:
2184 umidi->usb_protocol_ops = &snd_usbmidi_ftdi_ops;
2185
2186 /* set baud rate to 31250 (48 MHz / 16 / 96) */
2187 err = usb_control_msg(umidi->dev, usb_sndctrlpipe(umidi->dev, 0),
2188 3, 0x40, 0x60, 0, NULL, 0, 1000);
2189 if (err < 0)
2190 break;
2191
2192 err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
2193 break;
2194 default:
2195 snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
2196 err = -ENXIO;
2197 break;
2198 }
2199 if (err < 0) {
2200 kfree(umidi);
2201 return err;
2202 }
2203
2204 /* create rawmidi device */
2205 out_ports = 0;
2206 in_ports = 0;
2207 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
2208 out_ports += hweight16(endpoints[i].out_cables);
2209 in_ports += hweight16(endpoints[i].in_cables);
2210 }
2211 err = snd_usbmidi_create_rawmidi(umidi, out_ports, in_ports);
2212 if (err < 0) {
2213 kfree(umidi);
2214 return err;
2215 }
2216
2217 /* create endpoint/port structures */
2218 if (quirk && quirk->type == QUIRK_MIDI_MIDIMAN)
2219 err = snd_usbmidi_create_endpoints_midiman(umidi, &endpoints[0]);
2220 else
2221 err = snd_usbmidi_create_endpoints(umidi, endpoints);
2222 if (err < 0) {
2223 snd_usbmidi_free(umidi);
2224 return err;
2225 }
2226
2227 list_add_tail(&umidi->list, midi_list);
2228
2229 for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i)
2230 snd_usbmidi_input_start_ep(umidi->endpoints[i].in);
2231 return 0;
2232}
2233
2234EXPORT_SYMBOL(snd_usbmidi_create);
2235EXPORT_SYMBOL(snd_usbmidi_input_stop);
2236EXPORT_SYMBOL(snd_usbmidi_input_start);
2237EXPORT_SYMBOL(snd_usbmidi_disconnect);