Linux Audio

Check our new training course

Loading...
v5.9
  1/* SPDX-License-Identifier: GPL-2.0-or-later */
  2/*
  3 * Driver for Digigram miXart soundcards
  4 *
  5 * definitions and makros for basic card access
  6 *
  7 * Copyright (c) 2003 by Digigram <alsa@digigram.com>
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  8 */
  9
 10#ifndef __SOUND_MIXART_HWDEP_H
 11#define __SOUND_MIXART_HWDEP_H
 12
 13#include <sound/hwdep.h>
 14
 15#ifndef readl_be
 16#define readl_be(x) be32_to_cpu((__force __be32)__raw_readl(x))
 17#endif
 18
 19#ifndef writel_be
 20#define writel_be(data,addr) __raw_writel((__force u32)cpu_to_be32(data),addr)
 21#endif
 22
 23#ifndef readl_le
 24#define readl_le(x) le32_to_cpu((__force __le32)__raw_readl(x))
 25#endif
 26
 27#ifndef writel_le
 28#define writel_le(data,addr) __raw_writel((__force u32)cpu_to_le32(data),addr)
 29#endif
 30
 31#define MIXART_MEM(mgr,x)	((mgr)->mem[0].virt + (x))
 32#define MIXART_REG(mgr,x)	((mgr)->mem[1].virt + (x))
 33
 34
 35/* Daughter board Type */
 36#define DAUGHTER_TYPE_MASK     0x0F 
 37#define DAUGHTER_VER_MASK      0xF0 
 38#define DAUGHTER_TYPEVER_MASK  (DAUGHTER_TYPE_MASK|DAUGHTER_VER_MASK)
 39 
 40#define MIXART_DAUGHTER_TYPE_NONE     0x00 
 41#define MIXART_DAUGHTER_TYPE_COBRANET 0x08 
 42#define MIXART_DAUGHTER_TYPE_AES      0x0E
 43
 44
 45
 46#define MIXART_BA0_SIZE 	(16 * 1024 * 1024) /* 16M */
 47#define MIXART_BA1_SIZE 	(4  * 1024)        /* 4k */
 48
 49/*
 50 * -----------BAR 0 --------------------------------------------------------------------------------------------------------
 51 */
 52#define  MIXART_PSEUDOREG                          0x2000                    /* base address for pseudoregister */
 53
 54#define  MIXART_PSEUDOREG_BOARDNUMBER              MIXART_PSEUDOREG+0        /* board number */
 55
 56/* perfmeter (available when elf loaded)*/
 57#define  MIXART_PSEUDOREG_PERF_STREAM_LOAD_OFFSET  MIXART_PSEUDOREG+0x70     /* streaming load */
 58#define  MIXART_PSEUDOREG_PERF_SYSTEM_LOAD_OFFSET  MIXART_PSEUDOREG+0x78     /* system load (reference)*/
 59#define  MIXART_PSEUDOREG_PERF_MAILBX_LOAD_OFFSET  MIXART_PSEUDOREG+0x7C     /* mailbox load */
 60#define  MIXART_PSEUDOREG_PERF_INTERR_LOAD_OFFSET  MIXART_PSEUDOREG+0x74     /* interrupt handling  load */
 61
 62/* motherboard xilinx loader info */
 63#define  MIXART_PSEUDOREG_MXLX_BASE_ADDR_OFFSET    MIXART_PSEUDOREG+0x9C     /* 0x00600000 */ 
 64#define  MIXART_PSEUDOREG_MXLX_SIZE_OFFSET         MIXART_PSEUDOREG+0xA0     /* xilinx size in bytes */ 
 65#define  MIXART_PSEUDOREG_MXLX_STATUS_OFFSET       MIXART_PSEUDOREG+0xA4     /* status = EMBEBBED_STAT_XXX */ 
 66
 67/* elf loader info */
 68#define  MIXART_PSEUDOREG_ELF_STATUS_OFFSET        MIXART_PSEUDOREG+0xB0     /* status = EMBEBBED_STAT_XXX */ 
 69
 70/* 
 71*  after the elf code is loaded, and the flowtable info was passed to it,
 72*  the driver polls on this address, until it shows 1 (presence) or 2 (absence)
 73*  once it is non-zero, the daughter board type may be read
 74*/
 75#define  MIXART_PSEUDOREG_DBRD_PRESENCE_OFFSET     MIXART_PSEUDOREG+0x990   
 76
 77/* Global info structure */
 78#define  MIXART_PSEUDOREG_DBRD_TYPE_OFFSET         MIXART_PSEUDOREG+0x994    /* Type and version of daughterboard  */
 79
 80
 81/* daughterboard xilinx loader info */
 82#define  MIXART_PSEUDOREG_DXLX_BASE_ADDR_OFFSET    MIXART_PSEUDOREG+0x998    /* get the address here where to write the file */ 
 83#define  MIXART_PSEUDOREG_DXLX_SIZE_OFFSET         MIXART_PSEUDOREG+0x99C    /* xilinx size in bytes */ 
 84#define  MIXART_PSEUDOREG_DXLX_STATUS_OFFSET       MIXART_PSEUDOREG+0x9A0    /* status = EMBEBBED_STAT_XXX */ 
 85
 86/*  */
 87#define  MIXART_FLOWTABLE_PTR                      0x3000                    /* pointer to flow table */
 88
 89/* mailbox addresses  */
 90
 91/* message DRV -> EMB */
 92#define MSG_INBOUND_POST_HEAD       0x010008	/* DRV posts MF + increment4 */
 93#define	MSG_INBOUND_POST_TAIL       0x01000C	/* EMB gets MF + increment4 */
 94/* message EMB -> DRV */
 95#define	MSG_OUTBOUND_POST_TAIL      0x01001C	/* DRV gets MF + increment4 */
 96#define	MSG_OUTBOUND_POST_HEAD      0x010018	/* EMB posts MF + increment4 */
 97/* Get Free Frames */
 98#define MSG_INBOUND_FREE_TAIL       0x010004	/* DRV gets MFA + increment4 */
 99#define MSG_OUTBOUND_FREE_TAIL      0x010014	/* EMB gets MFA + increment4 */
100/* Put Free Frames */
101#define MSG_OUTBOUND_FREE_HEAD      0x010010	/* DRV puts MFA + increment4 */
102#define MSG_INBOUND_FREE_HEAD       0x010000    /* EMB puts MFA + increment4 */
103
104/* firmware addresses of the message fifos */
105#define MSG_BOUND_STACK_SIZE        0x004000    /* size of each following stack */
106/* posted messages */
107#define MSG_OUTBOUND_POST_STACK     0x108000    /* stack of messages to the DRV */
108#define MSG_INBOUND_POST_STACK      0x104000    /* stack of messages to the EMB */
109/* available empty messages */
110#define MSG_OUTBOUND_FREE_STACK     0x10C000    /* stack of free enveloped for EMB */
111#define MSG_INBOUND_FREE_STACK      0x100000    /* stack of free enveloped for DRV */
112
113
114/* defines for mailbox message frames */
115#define MSG_FRAME_OFFSET            0x64
116#define MSG_FRAME_SIZE              0x6400
117#define MSG_FRAME_NUMBER            32
118#define MSG_FROM_AGENT_ITMF_OFFSET  (MSG_FRAME_OFFSET + (MSG_FRAME_SIZE * MSG_FRAME_NUMBER))
119#define MSG_TO_AGENT_ITMF_OFFSET    (MSG_FROM_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE)
120#define MSG_HOST_RSC_PROTECTION     (MSG_TO_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE)
121#define MSG_AGENT_RSC_PROTECTION    (MSG_HOST_RSC_PROTECTION + 4)
122
123
124/*
125 * -----------BAR 1 --------------------------------------------------------------------------------------------------------
126 */
127
128/* interrupt addresses and constants */
129#define MIXART_PCI_OMIMR_OFFSET                 0x34    /* outbound message interrupt mask register */
130#define MIXART_PCI_OMISR_OFFSET                 0x30    /* outbound message interrupt status register */
131#define MIXART_PCI_ODBR_OFFSET                  0x60    /* outbound doorbell register */
132
133#define MIXART_BA1_BRUTAL_RESET_OFFSET          0x68    /* write 1 in LSBit to reset board */
134
135#define MIXART_HOST_ALL_INTERRUPT_MASKED        0x02B   /* 0000 0010 1011 */
136#define MIXART_ALLOW_OUTBOUND_DOORBELL          0x023   /* 0000 0010 0011 */
137#define MIXART_OIDI                             0x008   /* 0000 0000 1000 */
138
139
140int snd_mixart_setup_firmware(struct mixart_mgr *mgr);
141
142#endif /* __SOUND_MIXART_HWDEP_H */
v3.15
 
  1/*
  2 * Driver for Digigram miXart soundcards
  3 *
  4 * definitions and makros for basic card access
  5 *
  6 * Copyright (c) 2003 by Digigram <alsa@digigram.com>
  7 *
  8 *   This program is free software; you can redistribute it and/or modify
  9 *   it under the terms of the GNU General Public License as published by
 10 *   the Free Software Foundation; either version 2 of the License, or
 11 *   (at your option) any later version.
 12 *
 13 *   This program is distributed in the hope that it will be useful,
 14 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 15 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 16 *   GNU General Public License for more details.
 17 *
 18 *   You should have received a copy of the GNU General Public License
 19 *   along with this program; if not, write to the Free Software
 20 *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 21 */
 22
 23#ifndef __SOUND_MIXART_HWDEP_H
 24#define __SOUND_MIXART_HWDEP_H
 25
 26#include <sound/hwdep.h>
 27
 28#ifndef readl_be
 29#define readl_be(x) be32_to_cpu(__raw_readl(x))
 30#endif
 31
 32#ifndef writel_be
 33#define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr)
 34#endif
 35
 36#ifndef readl_le
 37#define readl_le(x) le32_to_cpu(__raw_readl(x))
 38#endif
 39
 40#ifndef writel_le
 41#define writel_le(data,addr) __raw_writel(cpu_to_le32(data),addr)
 42#endif
 43
 44#define MIXART_MEM(mgr,x)	((mgr)->mem[0].virt + (x))
 45#define MIXART_REG(mgr,x)	((mgr)->mem[1].virt + (x))
 46
 47
 48/* Daughter board Type */
 49#define DAUGHTER_TYPE_MASK     0x0F 
 50#define DAUGHTER_VER_MASK      0xF0 
 51#define DAUGHTER_TYPEVER_MASK  (DAUGHTER_TYPE_MASK|DAUGHTER_VER_MASK)
 52 
 53#define MIXART_DAUGHTER_TYPE_NONE     0x00 
 54#define MIXART_DAUGHTER_TYPE_COBRANET 0x08 
 55#define MIXART_DAUGHTER_TYPE_AES      0x0E
 56
 57
 58
 59#define MIXART_BA0_SIZE 	(16 * 1024 * 1024) /* 16M */
 60#define MIXART_BA1_SIZE 	(4  * 1024)        /* 4k */
 61
 62/*
 63 * -----------BAR 0 --------------------------------------------------------------------------------------------------------
 64 */
 65#define  MIXART_PSEUDOREG                          0x2000                    /* base address for pseudoregister */
 66
 67#define  MIXART_PSEUDOREG_BOARDNUMBER              MIXART_PSEUDOREG+0        /* board number */
 68
 69/* perfmeter (available when elf loaded)*/
 70#define  MIXART_PSEUDOREG_PERF_STREAM_LOAD_OFFSET  MIXART_PSEUDOREG+0x70     /* streaming load */
 71#define  MIXART_PSEUDOREG_PERF_SYSTEM_LOAD_OFFSET  MIXART_PSEUDOREG+0x78     /* system load (reference)*/
 72#define  MIXART_PSEUDOREG_PERF_MAILBX_LOAD_OFFSET  MIXART_PSEUDOREG+0x7C     /* mailbox load */
 73#define  MIXART_PSEUDOREG_PERF_INTERR_LOAD_OFFSET  MIXART_PSEUDOREG+0x74     /* interrupt handling  load */
 74
 75/* motherboard xilinx loader info */
 76#define  MIXART_PSEUDOREG_MXLX_BASE_ADDR_OFFSET    MIXART_PSEUDOREG+0x9C     /* 0x00600000 */ 
 77#define  MIXART_PSEUDOREG_MXLX_SIZE_OFFSET         MIXART_PSEUDOREG+0xA0     /* xilinx size in bytes */ 
 78#define  MIXART_PSEUDOREG_MXLX_STATUS_OFFSET       MIXART_PSEUDOREG+0xA4     /* status = EMBEBBED_STAT_XXX */ 
 79
 80/* elf loader info */
 81#define  MIXART_PSEUDOREG_ELF_STATUS_OFFSET        MIXART_PSEUDOREG+0xB0     /* status = EMBEBBED_STAT_XXX */ 
 82
 83/* 
 84*  after the elf code is loaded, and the flowtable info was passed to it,
 85*  the driver polls on this address, until it shows 1 (presence) or 2 (absence)
 86*  once it is non-zero, the daughter board type may be read
 87*/
 88#define  MIXART_PSEUDOREG_DBRD_PRESENCE_OFFSET     MIXART_PSEUDOREG+0x990   
 89
 90/* Global info structure */
 91#define  MIXART_PSEUDOREG_DBRD_TYPE_OFFSET         MIXART_PSEUDOREG+0x994    /* Type and version of daughterboard  */
 92
 93
 94/* daughterboard xilinx loader info */
 95#define  MIXART_PSEUDOREG_DXLX_BASE_ADDR_OFFSET    MIXART_PSEUDOREG+0x998    /* get the address here where to write the file */ 
 96#define  MIXART_PSEUDOREG_DXLX_SIZE_OFFSET         MIXART_PSEUDOREG+0x99C    /* xilinx size in bytes */ 
 97#define  MIXART_PSEUDOREG_DXLX_STATUS_OFFSET       MIXART_PSEUDOREG+0x9A0    /* status = EMBEBBED_STAT_XXX */ 
 98
 99/*  */
100#define  MIXART_FLOWTABLE_PTR                      0x3000                    /* pointer to flow table */
101
102/* mailbox addresses  */
103
104/* message DRV -> EMB */
105#define MSG_INBOUND_POST_HEAD       0x010008	/* DRV posts MF + increment4 */
106#define	MSG_INBOUND_POST_TAIL       0x01000C	/* EMB gets MF + increment4 */
107/* message EMB -> DRV */
108#define	MSG_OUTBOUND_POST_TAIL      0x01001C	/* DRV gets MF + increment4 */
109#define	MSG_OUTBOUND_POST_HEAD      0x010018	/* EMB posts MF + increment4 */
110/* Get Free Frames */
111#define MSG_INBOUND_FREE_TAIL       0x010004	/* DRV gets MFA + increment4 */
112#define MSG_OUTBOUND_FREE_TAIL      0x010014	/* EMB gets MFA + increment4 */
113/* Put Free Frames */
114#define MSG_OUTBOUND_FREE_HEAD      0x010010	/* DRV puts MFA + increment4 */
115#define MSG_INBOUND_FREE_HEAD       0x010000    /* EMB puts MFA + increment4 */
116
117/* firmware addresses of the message fifos */
118#define MSG_BOUND_STACK_SIZE        0x004000    /* size of each following stack */
119/* posted messages */
120#define MSG_OUTBOUND_POST_STACK     0x108000    /* stack of messages to the DRV */
121#define MSG_INBOUND_POST_STACK      0x104000    /* stack of messages to the EMB */
122/* available empty messages */
123#define MSG_OUTBOUND_FREE_STACK     0x10C000    /* stack of free enveloped for EMB */
124#define MSG_INBOUND_FREE_STACK      0x100000    /* stack of free enveloped for DRV */
125
126
127/* defines for mailbox message frames */
128#define MSG_FRAME_OFFSET            0x64
129#define MSG_FRAME_SIZE              0x6400
130#define MSG_FRAME_NUMBER            32
131#define MSG_FROM_AGENT_ITMF_OFFSET  (MSG_FRAME_OFFSET + (MSG_FRAME_SIZE * MSG_FRAME_NUMBER))
132#define MSG_TO_AGENT_ITMF_OFFSET    (MSG_FROM_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE)
133#define MSG_HOST_RSC_PROTECTION     (MSG_TO_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE)
134#define MSG_AGENT_RSC_PROTECTION    (MSG_HOST_RSC_PROTECTION + 4)
135
136
137/*
138 * -----------BAR 1 --------------------------------------------------------------------------------------------------------
139 */
140
141/* interrupt addresses and constants */
142#define MIXART_PCI_OMIMR_OFFSET                 0x34    /* outbound message interrupt mask register */
143#define MIXART_PCI_OMISR_OFFSET                 0x30    /* outbound message interrupt status register */
144#define MIXART_PCI_ODBR_OFFSET                  0x60    /* outbound doorbell register */
145
146#define MIXART_BA1_BRUTAL_RESET_OFFSET          0x68    /* write 1 in LSBit to reset board */
147
148#define MIXART_HOST_ALL_INTERRUPT_MASKED        0x02B   /* 0000 0010 1011 */
149#define MIXART_ALLOW_OUTBOUND_DOORBELL          0x023   /* 0000 0010 0011 */
150#define MIXART_OIDI                             0x008   /* 0000 0000 1000 */
151
152
153int snd_mixart_setup_firmware(struct mixart_mgr *mgr);
154
155#endif /* __SOUND_MIXART_HWDEP_H */