Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2menu "HD-Audio"
3
4config SND_HDA
5 tristate
6 select SND_PCM
7 select SND_VMASTER
8 select SND_JACK
9 select SND_HDA_CORE
10
11config SND_HDA_GENERIC_LEDS
12 bool
13
14config SND_HDA_INTEL
15 tristate "HD Audio PCI"
16 depends on SND_PCI
17 select SND_HDA
18 select SND_INTEL_DSP_CONFIG
19 help
20 Say Y here to include support for Intel "High Definition
21 Audio" (Azalia) and its compatible devices.
22
23 This option enables the HD-audio controller. Don't forget
24 to choose the appropriate codec options below.
25
26 To compile this driver as a module, choose M here: the module
27 will be called snd-hda-intel.
28
29config SND_HDA_TEGRA
30 tristate "NVIDIA Tegra HD Audio"
31 depends on ARCH_TEGRA
32 select SND_HDA
33 select SND_HDA_ALIGNED_MMIO
34 help
35 Say Y here to support the HDA controller present in NVIDIA
36 Tegra SoCs
37
38 This options enables support for the HD Audio controller
39 present in some NVIDIA Tegra SoCs, used to communicate audio
40 to the HDMI output.
41
42 To compile this driver as a module, choose M here: the module
43 will be called snd-hda-tegra.
44
45if SND_HDA
46
47config SND_HDA_HWDEP
48 bool "Build hwdep interface for HD-audio driver"
49 select SND_HWDEP
50 help
51 Say Y here to build a hwdep interface for HD-audio driver.
52 This interface can be used for out-of-band communication
53 with codecs for debugging purposes.
54
55config SND_HDA_RECONFIG
56 bool "Allow dynamic codec reconfiguration"
57 help
58 Say Y here to enable the HD-audio codec re-configuration feature.
59 It allows user to clear the whole codec configuration, change the
60 codec setup, add extra verbs, and re-configure the codec dynamically.
61
62 Note that this item alone doesn't provide the sysfs interface, but
63 enables the feature just for the patch loader below.
64 If you need the traditional sysfs entries for the manual interaction,
65 turn on CONFIG_SND_HDA_HWDEP as well.
66
67config SND_HDA_INPUT_BEEP
68 bool "Support digital beep via input layer"
69 depends on INPUT=y || INPUT=SND_HDA
70 help
71 Say Y here to build a digital beep interface for HD-audio
72 driver. This interface is used to generate digital beeps.
73
74config SND_HDA_INPUT_BEEP_MODE
75 int "Digital beep registration mode (0=off, 1=on)"
76 depends on SND_HDA_INPUT_BEEP=y
77 default "1"
78 range 0 1
79 help
80 Set 0 to disable the digital beep interface for HD-audio by default.
81 Set 1 to always enable the digital beep interface for HD-audio by
82 default.
83
84config SND_HDA_PATCH_LOADER
85 bool "Support initialization patch loading for HD-audio"
86 select FW_LOADER
87 select SND_HDA_RECONFIG
88 help
89 Say Y here to allow the HD-audio driver to load a pseudo
90 firmware file ("patch") for overriding the BIOS setup at
91 start up. The "patch" file can be specified via patch module
92 option, such as patch=hda-init.
93
94config SND_HDA_CODEC_REALTEK
95 tristate "Build Realtek HD-audio codec support"
96 select SND_HDA_GENERIC
97 select SND_HDA_GENERIC_LEDS
98 help
99 Say Y or M here to include Realtek HD-audio codec support in
100 snd-hda-intel driver, such as ALC880.
101
102comment "Set to Y if you want auto-loading the codec driver"
103 depends on SND_HDA=y && SND_HDA_CODEC_REALTEK=m
104
105config SND_HDA_CODEC_ANALOG
106 tristate "Build Analog Devices HD-audio codec support"
107 select SND_HDA_GENERIC
108 help
109 Say Y or M here to include Analog Devices HD-audio codec support in
110 snd-hda-intel driver, such as AD1986A.
111
112comment "Set to Y if you want auto-loading the codec driver"
113 depends on SND_HDA=y && SND_HDA_CODEC_ANALOG=m
114
115config SND_HDA_CODEC_SIGMATEL
116 tristate "Build IDT/Sigmatel HD-audio codec support"
117 select SND_HDA_GENERIC
118 select SND_HDA_GENERIC_LEDS
119 help
120 Say Y or M here to include IDT (Sigmatel) HD-audio codec support in
121 snd-hda-intel driver, such as STAC9200.
122
123comment "Set to Y if you want auto-loading the codec driver"
124 depends on SND_HDA=y && SND_HDA_CODEC_SIGMATEL=m
125
126config SND_HDA_CODEC_VIA
127 tristate "Build VIA HD-audio codec support"
128 select SND_HDA_GENERIC
129 help
130 Say Y or M here to include VIA HD-audio codec support in
131 snd-hda-intel driver, such as VT1708.
132
133comment "Set to Y if you want auto-loading the codec driver"
134 depends on SND_HDA=y && SND_HDA_CODEC_VIA=m
135
136config SND_HDA_CODEC_HDMI
137 tristate "Build HDMI/DisplayPort HD-audio codec support"
138 select SND_DYNAMIC_MINORS
139 help
140 Say Y or M here to include HDMI and DisplayPort HD-audio codec
141 support in snd-hda-intel driver. This includes all AMD/ATI,
142 Intel and Nvidia HDMI/DisplayPort codecs.
143
144 Note that this option mandatorily enables CONFIG_SND_DYNAMIC_MINORS
145 to assure the multiple streams for DP-MST support.
146
147comment "Set to Y if you want auto-loading the codec driver"
148 depends on SND_HDA=y && SND_HDA_CODEC_HDMI=m
149
150config SND_HDA_CODEC_CIRRUS
151 tristate "Build Cirrus Logic codec support"
152 select SND_HDA_GENERIC
153 help
154 Say Y or M here to include Cirrus Logic codec support in
155 snd-hda-intel driver, such as CS4206.
156
157comment "Set to Y if you want auto-loading the codec driver"
158 depends on SND_HDA=y && SND_HDA_CODEC_CIRRUS=m
159
160config SND_HDA_CODEC_CONEXANT
161 tristate "Build Conexant HD-audio codec support"
162 select SND_HDA_GENERIC
163 select SND_HDA_GENERIC_LEDS
164 help
165 Say Y or M here to include Conexant HD-audio codec support in
166 snd-hda-intel driver, such as CX20549.
167
168comment "Set to Y if you want auto-loading the codec driver"
169 depends on SND_HDA=y && SND_HDA_CODEC_CONEXANT=m
170
171config SND_HDA_CODEC_CA0110
172 tristate "Build Creative CA0110-IBG codec support"
173 select SND_HDA_GENERIC
174 help
175 Say Y or M here to include Creative CA0110-IBG codec support in
176 snd-hda-intel driver, found on some Creative X-Fi cards.
177
178comment "Set to Y if you want auto-loading the codec driver"
179 depends on SND_HDA=y && SND_HDA_CODEC_CA0110=m
180
181config SND_HDA_CODEC_CA0132
182 tristate "Build Creative CA0132 codec support"
183 help
184 Say Y or M here to include Creative CA0132 codec support in
185 snd-hda-intel driver.
186
187comment "Set to Y if you want auto-loading the codec driver"
188 depends on SND_HDA=y && SND_HDA_CODEC_CA0132=m
189
190config SND_HDA_CODEC_CA0132_DSP
191 bool "Support new DSP code for CA0132 codec"
192 depends on SND_HDA_CODEC_CA0132
193 default y
194 select SND_HDA_DSP_LOADER
195 select FW_LOADER
196 help
197 Say Y here to enable the DSP for Creative CA0132 for extended
198 features like equalizer or echo cancellation.
199
200 Note that this option requires the external firmware file
201 (ctefx.bin).
202
203config SND_HDA_CODEC_CMEDIA
204 tristate "Build C-Media HD-audio codec support"
205 select SND_HDA_GENERIC
206 help
207 Say Y or M here to include C-Media HD-audio codec support in
208 snd-hda-intel driver, such as CMI9880.
209
210comment "Set to Y if you want auto-loading the codec driver"
211 depends on SND_HDA=y && SND_HDA_CODEC_CMEDIA=m
212
213config SND_HDA_CODEC_SI3054
214 tristate "Build Silicon Labs 3054 HD-modem codec support"
215 help
216 Say Y or M here to include Silicon Labs 3054 HD-modem codec
217 (and compatibles) support in snd-hda-intel driver.
218
219comment "Set to Y if you want auto-loading the codec driver"
220 depends on SND_HDA=y && SND_HDA_CODEC_SI3054=m
221
222config SND_HDA_GENERIC
223 tristate "Enable generic HD-audio codec parser"
224 select NEW_LEDS if SND_HDA_GENERIC_LEDS
225 select LEDS_CLASS if SND_HDA_GENERIC_LEDS
226 select LEDS_TRIGGERS if SND_HDA_GENERIC_LEDS
227 select LEDS_TRIGGER_AUDIO if SND_HDA_GENERIC_LEDS
228 help
229 Say Y or M here to enable the generic HD-audio codec parser
230 in snd-hda-intel driver.
231
232comment "Set to Y if you want auto-loading the codec driver"
233 depends on SND_HDA=y && SND_HDA_GENERIC=m
234
235config SND_HDA_POWER_SAVE_DEFAULT
236 int "Default time-out for HD-audio power-save mode"
237 depends on PM
238 default 0
239 help
240 The default time-out value in seconds for HD-audio automatic
241 power-save mode. 0 means to disable the power-save mode.
242
243config SND_HDA_INTEL_HDMI_SILENT_STREAM
244 bool "Enable Silent Stream always for HDMI"
245 depends on SND_HDA_INTEL
246 help
247 Intel hardware has a feature called 'silent stream', that
248 keeps external HDMI receiver's analog circuitry powered on
249 avoiding 2-3 sec silence during playback start. This mechanism
250 relies on setting channel_id as 0xf, sending info packet and
251 preventing codec D3 entry (increasing platform static power
252 consumption when HDMI receiver is plugged-in). 2-3 sec silence
253 at the playback start is expected whenever there is format change.
254 (default is 2 channel format).
255 Say Y to enable Silent Stream feature.
256
257endif
258
259endmenu
1menu "HD-Audio"
2
3config SND_HDA
4 tristate
5 select SND_PCM
6 select SND_VMASTER
7 select SND_KCTL_JACK
8
9config SND_HDA_INTEL
10 tristate "HD Audio PCI"
11 depends on SND_PCI
12 select SND_HDA
13 help
14 Say Y here to include support for Intel "High Definition
15 Audio" (Azalia) and its compatible devices.
16
17 This option enables the HD-audio controller. Don't forget
18 to choose the appropriate codec options below.
19
20 To compile this driver as a module, choose M here: the module
21 will be called snd-hda-intel.
22
23if SND_HDA
24
25config SND_HDA_DSP_LOADER
26 bool
27
28config SND_HDA_PREALLOC_SIZE
29 int "Pre-allocated buffer size for HD-audio driver"
30 range 0 32768
31 default 64
32 help
33 Specifies the default pre-allocated buffer-size in kB for the
34 HD-audio driver. A larger buffer (e.g. 2048) is preferred
35 for systems using PulseAudio. The default 64 is chosen just
36 for compatibility reasons.
37
38 Note that the pre-allocation size can be changed dynamically
39 via a proc file (/proc/asound/card*/pcm*/sub*/prealloc), too.
40
41config SND_HDA_HWDEP
42 bool "Build hwdep interface for HD-audio driver"
43 select SND_HWDEP
44 help
45 Say Y here to build a hwdep interface for HD-audio driver.
46 This interface can be used for out-of-band communication
47 with codecs for debugging purposes.
48
49config SND_HDA_RECONFIG
50 bool "Allow dynamic codec reconfiguration"
51 help
52 Say Y here to enable the HD-audio codec re-configuration feature.
53 This adds the sysfs interfaces to allow user to clear the whole
54 codec configuration, change the codec setup, add extra verbs,
55 and re-configure the codec dynamically.
56
57config SND_HDA_INPUT_BEEP
58 bool "Support digital beep via input layer"
59 depends on INPUT=y || INPUT=SND_HDA
60 help
61 Say Y here to build a digital beep interface for HD-audio
62 driver. This interface is used to generate digital beeps.
63
64config SND_HDA_INPUT_BEEP_MODE
65 int "Digital beep registration mode (0=off, 1=on)"
66 depends on SND_HDA_INPUT_BEEP=y
67 default "1"
68 range 0 1
69 help
70 Set 0 to disable the digital beep interface for HD-audio by default.
71 Set 1 to always enable the digital beep interface for HD-audio by
72 default.
73
74config SND_HDA_INPUT_JACK
75 bool "Support jack plugging notification via input layer"
76 depends on INPUT=y || INPUT=SND
77 select SND_JACK
78 help
79 Say Y here to enable the jack plugging notification via
80 input layer.
81
82config SND_HDA_PATCH_LOADER
83 bool "Support initialization patch loading for HD-audio"
84 select FW_LOADER
85 select SND_HDA_RECONFIG
86 help
87 Say Y here to allow the HD-audio driver to load a pseudo
88 firmware file ("patch") for overriding the BIOS setup at
89 start up. The "patch" file can be specified via patch module
90 option, such as patch=hda-init.
91
92config SND_HDA_CODEC_REALTEK
93 tristate "Build Realtek HD-audio codec support"
94 select SND_HDA_GENERIC
95 help
96 Say Y or M here to include Realtek HD-audio codec support in
97 snd-hda-intel driver, such as ALC880.
98
99comment "Set to Y if you want auto-loading the codec driver"
100 depends on SND_HDA=y && SND_HDA_CODEC_REALTEK=m
101
102config SND_HDA_CODEC_ANALOG
103 tristate "Build Analog Device HD-audio codec support"
104 select SND_HDA_GENERIC
105 help
106 Say Y or M here to include Analog Device HD-audio codec support in
107 snd-hda-intel driver, such as AD1986A.
108
109comment "Set to Y if you want auto-loading the codec driver"
110 depends on SND_HDA=y && SND_HDA_CODEC_ANALOG=m
111
112config SND_HDA_CODEC_SIGMATEL
113 tristate "Build IDT/Sigmatel HD-audio codec support"
114 select SND_HDA_GENERIC
115 help
116 Say Y or M here to include IDT (Sigmatel) HD-audio codec support in
117 snd-hda-intel driver, such as STAC9200.
118
119comment "Set to Y if you want auto-loading the codec driver"
120 depends on SND_HDA=y && SND_HDA_CODEC_SIGMATEL=m
121
122config SND_HDA_CODEC_VIA
123 tristate "Build VIA HD-audio codec support"
124 select SND_HDA_GENERIC
125 help
126 Say Y or M here to include VIA HD-audio codec support in
127 snd-hda-intel driver, such as VT1708.
128
129comment "Set to Y if you want auto-loading the codec driver"
130 depends on SND_HDA=y && SND_HDA_CODEC_VIA=m
131
132config SND_HDA_CODEC_HDMI
133 tristate "Build HDMI/DisplayPort HD-audio codec support"
134 help
135 Say Y or M here to include HDMI and DisplayPort HD-audio codec
136 support in snd-hda-intel driver. This includes all AMD/ATI,
137 Intel and Nvidia HDMI/DisplayPort codecs.
138
139comment "Set to Y if you want auto-loading the codec driver"
140 depends on SND_HDA=y && SND_HDA_CODEC_HDMI=m
141
142config SND_HDA_I915
143 bool
144 default y
145 depends on DRM_I915
146
147config SND_HDA_CODEC_CIRRUS
148 tristate "Build Cirrus Logic codec support"
149 select SND_HDA_GENERIC
150 help
151 Say Y or M here to include Cirrus Logic codec support in
152 snd-hda-intel driver, such as CS4206.
153
154comment "Set to Y if you want auto-loading the codec driver"
155 depends on SND_HDA=y && SND_HDA_CODEC_CIRRUS=m
156
157config SND_HDA_CODEC_CONEXANT
158 tristate "Build Conexant HD-audio codec support"
159 select SND_HDA_GENERIC
160 help
161 Say Y or M here to include Conexant HD-audio codec support in
162 snd-hda-intel driver, such as CX20549.
163
164comment "Set to Y if you want auto-loading the codec driver"
165 depends on SND_HDA=y && SND_HDA_CODEC_CONEXANT=m
166
167config SND_HDA_CODEC_CA0110
168 tristate "Build Creative CA0110-IBG codec support"
169 select SND_HDA_GENERIC
170 help
171 Say Y or M here to include Creative CA0110-IBG codec support in
172 snd-hda-intel driver, found on some Creative X-Fi cards.
173
174comment "Set to Y if you want auto-loading the codec driver"
175 depends on SND_HDA=y && SND_HDA_CODEC_CA0110=m
176
177config SND_HDA_CODEC_CA0132
178 tristate "Build Creative CA0132 codec support"
179 help
180 Say Y or M here to include Creative CA0132 codec support in
181 snd-hda-intel driver.
182
183comment "Set to Y if you want auto-loading the codec driver"
184 depends on SND_HDA=y && SND_HDA_CODEC_CA0132=m
185
186config SND_HDA_CODEC_CA0132_DSP
187 bool "Support new DSP code for CA0132 codec"
188 depends on SND_HDA_CODEC_CA0132
189 select SND_HDA_DSP_LOADER
190 select FW_LOADER
191 help
192 Say Y here to enable the DSP for Creative CA0132 for extended
193 features like equalizer or echo cancellation.
194
195 Note that this option requires the external firmware file
196 (ctefx.bin).
197
198config SND_HDA_CODEC_CMEDIA
199 tristate "Build C-Media HD-audio codec support"
200 select SND_HDA_GENERIC
201 help
202 Say Y or M here to include C-Media HD-audio codec support in
203 snd-hda-intel driver, such as CMI9880.
204
205comment "Set to Y if you want auto-loading the codec driver"
206 depends on SND_HDA=y && SND_HDA_CODEC_CMEDIA=m
207
208config SND_HDA_CODEC_SI3054
209 tristate "Build Silicon Labs 3054 HD-modem codec support"
210 help
211 Say Y or M here to include Silicon Labs 3054 HD-modem codec
212 (and compatibles) support in snd-hda-intel driver.
213
214comment "Set to Y if you want auto-loading the codec driver"
215 depends on SND_HDA=y && SND_HDA_CODEC_SI3054=m
216
217config SND_HDA_GENERIC
218 tristate "Enable generic HD-audio codec parser"
219 help
220 Say Y or M here to enable the generic HD-audio codec parser
221 in snd-hda-intel driver.
222
223comment "Set to Y if you want auto-loading the codec driver"
224 depends on SND_HDA=y && SND_HDA_GENERIC=m
225
226config SND_HDA_POWER_SAVE_DEFAULT
227 int "Default time-out for HD-audio power-save mode"
228 depends on PM
229 default 0
230 help
231 The default time-out value in seconds for HD-audio automatic
232 power-save mode. 0 means to disable the power-save mode.
233
234endif
235
236endmenu