Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * USB Cypress M8 driver
4 *
5 * Copyright (C) 2004
6 * Lonnie Mendez (dignome@gmail.com)
7 * Copyright (C) 2003,2004
8 * Neil Whelchel (koyama@firstlight.net)
9 *
10 * See Documentation/usb/usb-serial.rst for more information on using this
11 * driver
12 *
13 * See http://geocities.com/i0xox0i for information on this driver and the
14 * earthmate usb device.
15 */
16
17/* Thanks to Neil Whelchel for writing the first cypress m8 implementation
18 for linux. */
19/* Thanks to cypress for providing references for the hid reports. */
20/* Thanks to Jiang Zhang for providing links and for general help. */
21/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
22
23
24#include <linux/kernel.h>
25#include <linux/errno.h>
26#include <linux/slab.h>
27#include <linux/tty.h>
28#include <linux/tty_driver.h>
29#include <linux/tty_flip.h>
30#include <linux/module.h>
31#include <linux/moduleparam.h>
32#include <linux/spinlock.h>
33#include <linux/usb.h>
34#include <linux/usb/serial.h>
35#include <linux/serial.h>
36#include <linux/kfifo.h>
37#include <linux/delay.h>
38#include <linux/uaccess.h>
39#include <asm/unaligned.h>
40
41#include "cypress_m8.h"
42
43
44static bool stats;
45static int interval;
46static bool unstable_bauds;
47
48#define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
49#define DRIVER_DESC "Cypress USB to Serial Driver"
50
51/* write buffer size defines */
52#define CYPRESS_BUF_SIZE 1024
53
54static const struct usb_device_id id_table_earthmate[] = {
55 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
56 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
57 { } /* Terminating entry */
58};
59
60static const struct usb_device_id id_table_cyphidcomrs232[] = {
61 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
62 { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) },
63 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
64 { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
65 { } /* Terminating entry */
66};
67
68static const struct usb_device_id id_table_nokiaca42v2[] = {
69 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
70 { } /* Terminating entry */
71};
72
73static const struct usb_device_id id_table_combined[] = {
74 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
75 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
76 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
77 { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) },
78 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
79 { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
80 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
81 { } /* Terminating entry */
82};
83
84MODULE_DEVICE_TABLE(usb, id_table_combined);
85
86enum packet_format {
87 packet_format_1, /* b0:status, b1:payload count */
88 packet_format_2 /* b0[7:3]:status, b0[2:0]:payload count */
89};
90
91struct cypress_private {
92 spinlock_t lock; /* private lock */
93 int chiptype; /* identifier of device, for quirks/etc */
94 int bytes_in; /* used for statistics */
95 int bytes_out; /* used for statistics */
96 int cmd_count; /* used for statistics */
97 int cmd_ctrl; /* always set this to 1 before issuing a command */
98 struct kfifo write_fifo; /* write fifo */
99 int write_urb_in_use; /* write urb in use indicator */
100 int write_urb_interval; /* interval to use for write urb */
101 int read_urb_interval; /* interval to use for read urb */
102 int comm_is_ok; /* true if communication is (still) ok */
103 __u8 line_control; /* holds dtr / rts value */
104 __u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */
105 __u8 current_config; /* stores the current configuration byte */
106 __u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */
107 enum packet_format pkt_fmt; /* format to use for packet send / receive */
108 int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
109 int baud_rate; /* stores current baud rate in
110 integer form */
111 char prev_status; /* used for TIOCMIWAIT */
112};
113
114/* function prototypes for the Cypress USB to serial device */
115static int cypress_earthmate_port_probe(struct usb_serial_port *port);
116static int cypress_hidcom_port_probe(struct usb_serial_port *port);
117static int cypress_ca42v2_port_probe(struct usb_serial_port *port);
118static int cypress_port_remove(struct usb_serial_port *port);
119static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
120static void cypress_close(struct usb_serial_port *port);
121static void cypress_dtr_rts(struct usb_serial_port *port, int on);
122static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
123 const unsigned char *buf, int count);
124static void cypress_send(struct usb_serial_port *port);
125static int cypress_write_room(struct tty_struct *tty);
126static void cypress_earthmate_init_termios(struct tty_struct *tty);
127static void cypress_set_termios(struct tty_struct *tty,
128 struct usb_serial_port *port, struct ktermios *old);
129static int cypress_tiocmget(struct tty_struct *tty);
130static int cypress_tiocmset(struct tty_struct *tty,
131 unsigned int set, unsigned int clear);
132static int cypress_chars_in_buffer(struct tty_struct *tty);
133static void cypress_throttle(struct tty_struct *tty);
134static void cypress_unthrottle(struct tty_struct *tty);
135static void cypress_set_dead(struct usb_serial_port *port);
136static void cypress_read_int_callback(struct urb *urb);
137static void cypress_write_int_callback(struct urb *urb);
138
139static struct usb_serial_driver cypress_earthmate_device = {
140 .driver = {
141 .owner = THIS_MODULE,
142 .name = "earthmate",
143 },
144 .description = "DeLorme Earthmate USB",
145 .id_table = id_table_earthmate,
146 .num_ports = 1,
147 .port_probe = cypress_earthmate_port_probe,
148 .port_remove = cypress_port_remove,
149 .open = cypress_open,
150 .close = cypress_close,
151 .dtr_rts = cypress_dtr_rts,
152 .write = cypress_write,
153 .write_room = cypress_write_room,
154 .init_termios = cypress_earthmate_init_termios,
155 .set_termios = cypress_set_termios,
156 .tiocmget = cypress_tiocmget,
157 .tiocmset = cypress_tiocmset,
158 .tiocmiwait = usb_serial_generic_tiocmiwait,
159 .chars_in_buffer = cypress_chars_in_buffer,
160 .throttle = cypress_throttle,
161 .unthrottle = cypress_unthrottle,
162 .read_int_callback = cypress_read_int_callback,
163 .write_int_callback = cypress_write_int_callback,
164};
165
166static struct usb_serial_driver cypress_hidcom_device = {
167 .driver = {
168 .owner = THIS_MODULE,
169 .name = "cyphidcom",
170 },
171 .description = "HID->COM RS232 Adapter",
172 .id_table = id_table_cyphidcomrs232,
173 .num_ports = 1,
174 .port_probe = cypress_hidcom_port_probe,
175 .port_remove = cypress_port_remove,
176 .open = cypress_open,
177 .close = cypress_close,
178 .dtr_rts = cypress_dtr_rts,
179 .write = cypress_write,
180 .write_room = cypress_write_room,
181 .set_termios = cypress_set_termios,
182 .tiocmget = cypress_tiocmget,
183 .tiocmset = cypress_tiocmset,
184 .tiocmiwait = usb_serial_generic_tiocmiwait,
185 .chars_in_buffer = cypress_chars_in_buffer,
186 .throttle = cypress_throttle,
187 .unthrottle = cypress_unthrottle,
188 .read_int_callback = cypress_read_int_callback,
189 .write_int_callback = cypress_write_int_callback,
190};
191
192static struct usb_serial_driver cypress_ca42v2_device = {
193 .driver = {
194 .owner = THIS_MODULE,
195 .name = "nokiaca42v2",
196 },
197 .description = "Nokia CA-42 V2 Adapter",
198 .id_table = id_table_nokiaca42v2,
199 .num_ports = 1,
200 .port_probe = cypress_ca42v2_port_probe,
201 .port_remove = cypress_port_remove,
202 .open = cypress_open,
203 .close = cypress_close,
204 .dtr_rts = cypress_dtr_rts,
205 .write = cypress_write,
206 .write_room = cypress_write_room,
207 .set_termios = cypress_set_termios,
208 .tiocmget = cypress_tiocmget,
209 .tiocmset = cypress_tiocmset,
210 .tiocmiwait = usb_serial_generic_tiocmiwait,
211 .chars_in_buffer = cypress_chars_in_buffer,
212 .throttle = cypress_throttle,
213 .unthrottle = cypress_unthrottle,
214 .read_int_callback = cypress_read_int_callback,
215 .write_int_callback = cypress_write_int_callback,
216};
217
218static struct usb_serial_driver * const serial_drivers[] = {
219 &cypress_earthmate_device, &cypress_hidcom_device,
220 &cypress_ca42v2_device, NULL
221};
222
223/*****************************************************************************
224 * Cypress serial helper functions
225 *****************************************************************************/
226
227/* FRWD Dongle hidcom needs to skip reset and speed checks */
228static inline bool is_frwd(struct usb_device *dev)
229{
230 return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
231 (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
232}
233
234static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
235{
236 struct cypress_private *priv;
237 priv = usb_get_serial_port_data(port);
238
239 if (unstable_bauds)
240 return new_rate;
241
242 /* FRWD Dongle uses 115200 bps */
243 if (is_frwd(port->serial->dev))
244 return new_rate;
245
246 /*
247 * The general purpose firmware for the Cypress M8 allows for
248 * a maximum speed of 57600bps (I have no idea whether DeLorme
249 * chose to use the general purpose firmware or not), if you
250 * need to modify this speed setting for your own project
251 * please add your own chiptype and modify the code likewise.
252 * The Cypress HID->COM device will work successfully up to
253 * 115200bps (but the actual throughput is around 3kBps).
254 */
255 if (port->serial->dev->speed == USB_SPEED_LOW) {
256 /*
257 * Mike Isely <isely@pobox.com> 2-Feb-2008: The
258 * Cypress app note that describes this mechanism
259 * states the the low-speed part can't handle more
260 * than 800 bytes/sec, in which case 4800 baud is the
261 * safest speed for a part like that.
262 */
263 if (new_rate > 4800) {
264 dev_dbg(&port->dev,
265 "%s - failed setting baud rate, device incapable speed %d\n",
266 __func__, new_rate);
267 return -1;
268 }
269 }
270 switch (priv->chiptype) {
271 case CT_EARTHMATE:
272 if (new_rate <= 600) {
273 /* 300 and 600 baud rates are supported under
274 * the generic firmware, but are not used with
275 * NMEA and SiRF protocols */
276 dev_dbg(&port->dev,
277 "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS\n",
278 __func__, new_rate);
279 return -1;
280 }
281 break;
282 default:
283 break;
284 }
285 return new_rate;
286}
287
288
289/* This function can either set or retrieve the current serial line settings */
290static int cypress_serial_control(struct tty_struct *tty,
291 struct usb_serial_port *port, speed_t baud_rate, int data_bits,
292 int stop_bits, int parity_enable, int parity_type, int reset,
293 int cypress_request_type)
294{
295 int new_baudrate = 0, retval = 0, tries = 0;
296 struct cypress_private *priv;
297 struct device *dev = &port->dev;
298 u8 *feature_buffer;
299 const unsigned int feature_len = 5;
300 unsigned long flags;
301
302 priv = usb_get_serial_port_data(port);
303
304 if (!priv->comm_is_ok)
305 return -ENODEV;
306
307 feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL);
308 if (!feature_buffer)
309 return -ENOMEM;
310
311 switch (cypress_request_type) {
312 case CYPRESS_SET_CONFIG:
313 /* 0 means 'Hang up' so doesn't change the true bit rate */
314 new_baudrate = priv->baud_rate;
315 if (baud_rate && baud_rate != priv->baud_rate) {
316 dev_dbg(dev, "%s - baud rate is changing\n", __func__);
317 retval = analyze_baud_rate(port, baud_rate);
318 if (retval >= 0) {
319 new_baudrate = retval;
320 dev_dbg(dev, "%s - New baud rate set to %d\n",
321 __func__, new_baudrate);
322 }
323 }
324 dev_dbg(dev, "%s - baud rate is being sent as %d\n", __func__,
325 new_baudrate);
326
327 /* fill the feature_buffer with new configuration */
328 put_unaligned_le32(new_baudrate, feature_buffer);
329 feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */
330 /* 1 bit gap */
331 feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
332 feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */
333 feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */
334 /* 1 bit gap */
335 feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */
336
337 dev_dbg(dev, "%s - device is being sent this feature report:\n", __func__);
338 dev_dbg(dev, "%s - %02X - %02X - %02X - %02X - %02X\n", __func__,
339 feature_buffer[0], feature_buffer[1],
340 feature_buffer[2], feature_buffer[3],
341 feature_buffer[4]);
342
343 do {
344 retval = usb_control_msg(port->serial->dev,
345 usb_sndctrlpipe(port->serial->dev, 0),
346 HID_REQ_SET_REPORT,
347 USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
348 0x0300, 0, feature_buffer,
349 feature_len, 500);
350
351 if (tries++ >= 3)
352 break;
353
354 } while (retval != feature_len &&
355 retval != -ENODEV);
356
357 if (retval != feature_len) {
358 dev_err(dev, "%s - failed sending serial line settings - %d\n",
359 __func__, retval);
360 cypress_set_dead(port);
361 } else {
362 spin_lock_irqsave(&priv->lock, flags);
363 priv->baud_rate = new_baudrate;
364 priv->current_config = feature_buffer[4];
365 spin_unlock_irqrestore(&priv->lock, flags);
366 /* If we asked for a speed change encode it */
367 if (baud_rate)
368 tty_encode_baud_rate(tty,
369 new_baudrate, new_baudrate);
370 }
371 break;
372 case CYPRESS_GET_CONFIG:
373 if (priv->get_cfg_unsafe) {
374 /* Not implemented for this device,
375 and if we try to do it we're likely
376 to crash the hardware. */
377 retval = -ENOTTY;
378 goto out;
379 }
380 dev_dbg(dev, "%s - retrieving serial line settings\n", __func__);
381 do {
382 retval = usb_control_msg(port->serial->dev,
383 usb_rcvctrlpipe(port->serial->dev, 0),
384 HID_REQ_GET_REPORT,
385 USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
386 0x0300, 0, feature_buffer,
387 feature_len, 500);
388
389 if (tries++ >= 3)
390 break;
391 } while (retval != feature_len
392 && retval != -ENODEV);
393
394 if (retval != feature_len) {
395 dev_err(dev, "%s - failed to retrieve serial line settings - %d\n",
396 __func__, retval);
397 cypress_set_dead(port);
398 goto out;
399 } else {
400 spin_lock_irqsave(&priv->lock, flags);
401 /* store the config in one byte, and later
402 use bit masks to check values */
403 priv->current_config = feature_buffer[4];
404 priv->baud_rate = get_unaligned_le32(feature_buffer);
405 spin_unlock_irqrestore(&priv->lock, flags);
406 }
407 }
408 spin_lock_irqsave(&priv->lock, flags);
409 ++priv->cmd_count;
410 spin_unlock_irqrestore(&priv->lock, flags);
411out:
412 kfree(feature_buffer);
413 return retval;
414} /* cypress_serial_control */
415
416
417static void cypress_set_dead(struct usb_serial_port *port)
418{
419 struct cypress_private *priv = usb_get_serial_port_data(port);
420 unsigned long flags;
421
422 spin_lock_irqsave(&priv->lock, flags);
423 if (!priv->comm_is_ok) {
424 spin_unlock_irqrestore(&priv->lock, flags);
425 return;
426 }
427 priv->comm_is_ok = 0;
428 spin_unlock_irqrestore(&priv->lock, flags);
429
430 dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
431 "interval might be too short\n", port->port_number);
432}
433
434
435/*****************************************************************************
436 * Cypress serial driver functions
437 *****************************************************************************/
438
439
440static int cypress_generic_port_probe(struct usb_serial_port *port)
441{
442 struct usb_serial *serial = port->serial;
443 struct cypress_private *priv;
444
445 if (!port->interrupt_out_urb || !port->interrupt_in_urb) {
446 dev_err(&port->dev, "required endpoint is missing\n");
447 return -ENODEV;
448 }
449
450 priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
451 if (!priv)
452 return -ENOMEM;
453
454 priv->comm_is_ok = !0;
455 spin_lock_init(&priv->lock);
456 if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) {
457 kfree(priv);
458 return -ENOMEM;
459 }
460
461 /* Skip reset for FRWD device. It is a workaound:
462 device hangs if it receives SET_CONFIGURE in Configured
463 state. */
464 if (!is_frwd(serial->dev))
465 usb_reset_configuration(serial->dev);
466
467 priv->cmd_ctrl = 0;
468 priv->line_control = 0;
469 priv->rx_flags = 0;
470 /* Default packet format setting is determined by packet size.
471 Anything with a size larger then 9 must have a separate
472 count field since the 3 bit count field is otherwise too
473 small. Otherwise we can use the slightly more compact
474 format. This is in accordance with the cypress_m8 serial
475 converter app note. */
476 if (port->interrupt_out_size > 9)
477 priv->pkt_fmt = packet_format_1;
478 else
479 priv->pkt_fmt = packet_format_2;
480
481 if (interval > 0) {
482 priv->write_urb_interval = interval;
483 priv->read_urb_interval = interval;
484 dev_dbg(&port->dev, "%s - read & write intervals forced to %d\n",
485 __func__, interval);
486 } else {
487 priv->write_urb_interval = port->interrupt_out_urb->interval;
488 priv->read_urb_interval = port->interrupt_in_urb->interval;
489 dev_dbg(&port->dev, "%s - intervals: read=%d write=%d\n",
490 __func__, priv->read_urb_interval,
491 priv->write_urb_interval);
492 }
493 usb_set_serial_port_data(port, priv);
494
495 port->port.drain_delay = 256;
496
497 return 0;
498}
499
500
501static int cypress_earthmate_port_probe(struct usb_serial_port *port)
502{
503 struct usb_serial *serial = port->serial;
504 struct cypress_private *priv;
505 int ret;
506
507 ret = cypress_generic_port_probe(port);
508 if (ret) {
509 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
510 return ret;
511 }
512
513 priv = usb_get_serial_port_data(port);
514 priv->chiptype = CT_EARTHMATE;
515 /* All Earthmate devices use the separated-count packet
516 format! Idiotic. */
517 priv->pkt_fmt = packet_format_1;
518 if (serial->dev->descriptor.idProduct !=
519 cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
520 /* The old original USB Earthmate seemed able to
521 handle GET_CONFIG requests; everything they've
522 produced since that time crashes if this command is
523 attempted :-( */
524 dev_dbg(&port->dev,
525 "%s - Marking this device as unsafe for GET_CONFIG commands\n",
526 __func__);
527 priv->get_cfg_unsafe = !0;
528 }
529
530 return 0;
531}
532
533static int cypress_hidcom_port_probe(struct usb_serial_port *port)
534{
535 struct cypress_private *priv;
536 int ret;
537
538 ret = cypress_generic_port_probe(port);
539 if (ret) {
540 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
541 return ret;
542 }
543
544 priv = usb_get_serial_port_data(port);
545 priv->chiptype = CT_CYPHIDCOM;
546
547 return 0;
548}
549
550static int cypress_ca42v2_port_probe(struct usb_serial_port *port)
551{
552 struct cypress_private *priv;
553 int ret;
554
555 ret = cypress_generic_port_probe(port);
556 if (ret) {
557 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
558 return ret;
559 }
560
561 priv = usb_get_serial_port_data(port);
562 priv->chiptype = CT_CA42V2;
563
564 return 0;
565}
566
567static int cypress_port_remove(struct usb_serial_port *port)
568{
569 struct cypress_private *priv;
570
571 priv = usb_get_serial_port_data(port);
572
573 kfifo_free(&priv->write_fifo);
574 kfree(priv);
575
576 return 0;
577}
578
579static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
580{
581 struct cypress_private *priv = usb_get_serial_port_data(port);
582 struct usb_serial *serial = port->serial;
583 unsigned long flags;
584 int result = 0;
585
586 if (!priv->comm_is_ok)
587 return -EIO;
588
589 /* clear halts before open */
590 usb_clear_halt(serial->dev, 0x81);
591 usb_clear_halt(serial->dev, 0x02);
592
593 spin_lock_irqsave(&priv->lock, flags);
594 /* reset read/write statistics */
595 priv->bytes_in = 0;
596 priv->bytes_out = 0;
597 priv->cmd_count = 0;
598 priv->rx_flags = 0;
599 spin_unlock_irqrestore(&priv->lock, flags);
600
601 /* Set termios */
602 cypress_send(port);
603
604 if (tty)
605 cypress_set_termios(tty, port, NULL);
606
607 /* setup the port and start reading from the device */
608 usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
609 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
610 port->interrupt_in_urb->transfer_buffer,
611 port->interrupt_in_urb->transfer_buffer_length,
612 cypress_read_int_callback, port, priv->read_urb_interval);
613 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
614
615 if (result) {
616 dev_err(&port->dev,
617 "%s - failed submitting read urb, error %d\n",
618 __func__, result);
619 cypress_set_dead(port);
620 }
621
622 return result;
623} /* cypress_open */
624
625static void cypress_dtr_rts(struct usb_serial_port *port, int on)
626{
627 struct cypress_private *priv = usb_get_serial_port_data(port);
628 /* drop dtr and rts */
629 spin_lock_irq(&priv->lock);
630 if (on == 0)
631 priv->line_control = 0;
632 else
633 priv->line_control = CONTROL_DTR | CONTROL_RTS;
634 priv->cmd_ctrl = 1;
635 spin_unlock_irq(&priv->lock);
636 cypress_write(NULL, port, NULL, 0);
637}
638
639static void cypress_close(struct usb_serial_port *port)
640{
641 struct cypress_private *priv = usb_get_serial_port_data(port);
642 unsigned long flags;
643
644 spin_lock_irqsave(&priv->lock, flags);
645 kfifo_reset_out(&priv->write_fifo);
646 spin_unlock_irqrestore(&priv->lock, flags);
647
648 dev_dbg(&port->dev, "%s - stopping urbs\n", __func__);
649 usb_kill_urb(port->interrupt_in_urb);
650 usb_kill_urb(port->interrupt_out_urb);
651
652 if (stats)
653 dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
654 priv->bytes_in, priv->bytes_out, priv->cmd_count);
655} /* cypress_close */
656
657
658static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
659 const unsigned char *buf, int count)
660{
661 struct cypress_private *priv = usb_get_serial_port_data(port);
662
663 dev_dbg(&port->dev, "%s - %d bytes\n", __func__, count);
664
665 /* line control commands, which need to be executed immediately,
666 are not put into the buffer for obvious reasons.
667 */
668 if (priv->cmd_ctrl) {
669 count = 0;
670 goto finish;
671 }
672
673 if (!count)
674 return count;
675
676 count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock);
677
678finish:
679 cypress_send(port);
680
681 return count;
682} /* cypress_write */
683
684
685static void cypress_send(struct usb_serial_port *port)
686{
687 int count = 0, result, offset, actual_size;
688 struct cypress_private *priv = usb_get_serial_port_data(port);
689 struct device *dev = &port->dev;
690 unsigned long flags;
691
692 if (!priv->comm_is_ok)
693 return;
694
695 dev_dbg(dev, "%s - interrupt out size is %d\n", __func__,
696 port->interrupt_out_size);
697
698 spin_lock_irqsave(&priv->lock, flags);
699 if (priv->write_urb_in_use) {
700 dev_dbg(dev, "%s - can't write, urb in use\n", __func__);
701 spin_unlock_irqrestore(&priv->lock, flags);
702 return;
703 }
704 spin_unlock_irqrestore(&priv->lock, flags);
705
706 /* clear buffer */
707 memset(port->interrupt_out_urb->transfer_buffer, 0,
708 port->interrupt_out_size);
709
710 spin_lock_irqsave(&priv->lock, flags);
711 switch (priv->pkt_fmt) {
712 default:
713 case packet_format_1:
714 /* this is for the CY7C64013... */
715 offset = 2;
716 port->interrupt_out_buffer[0] = priv->line_control;
717 break;
718 case packet_format_2:
719 /* this is for the CY7C63743... */
720 offset = 1;
721 port->interrupt_out_buffer[0] = priv->line_control;
722 break;
723 }
724
725 if (priv->line_control & CONTROL_RESET)
726 priv->line_control &= ~CONTROL_RESET;
727
728 if (priv->cmd_ctrl) {
729 priv->cmd_count++;
730 dev_dbg(dev, "%s - line control command being issued\n", __func__);
731 spin_unlock_irqrestore(&priv->lock, flags);
732 goto send;
733 } else
734 spin_unlock_irqrestore(&priv->lock, flags);
735
736 count = kfifo_out_locked(&priv->write_fifo,
737 &port->interrupt_out_buffer[offset],
738 port->interrupt_out_size - offset,
739 &priv->lock);
740 if (count == 0)
741 return;
742
743 switch (priv->pkt_fmt) {
744 default:
745 case packet_format_1:
746 port->interrupt_out_buffer[1] = count;
747 break;
748 case packet_format_2:
749 port->interrupt_out_buffer[0] |= count;
750 }
751
752 dev_dbg(dev, "%s - count is %d\n", __func__, count);
753
754send:
755 spin_lock_irqsave(&priv->lock, flags);
756 priv->write_urb_in_use = 1;
757 spin_unlock_irqrestore(&priv->lock, flags);
758
759 if (priv->cmd_ctrl)
760 actual_size = 1;
761 else
762 actual_size = count +
763 (priv->pkt_fmt == packet_format_1 ? 2 : 1);
764
765 usb_serial_debug_data(dev, __func__, port->interrupt_out_size,
766 port->interrupt_out_urb->transfer_buffer);
767
768 usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
769 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
770 port->interrupt_out_buffer, actual_size,
771 cypress_write_int_callback, port, priv->write_urb_interval);
772 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
773 if (result) {
774 dev_err_console(port,
775 "%s - failed submitting write urb, error %d\n",
776 __func__, result);
777 priv->write_urb_in_use = 0;
778 cypress_set_dead(port);
779 }
780
781 spin_lock_irqsave(&priv->lock, flags);
782 if (priv->cmd_ctrl)
783 priv->cmd_ctrl = 0;
784
785 /* do not count the line control and size bytes */
786 priv->bytes_out += count;
787 spin_unlock_irqrestore(&priv->lock, flags);
788
789 usb_serial_port_softint(port);
790} /* cypress_send */
791
792
793/* returns how much space is available in the soft buffer */
794static int cypress_write_room(struct tty_struct *tty)
795{
796 struct usb_serial_port *port = tty->driver_data;
797 struct cypress_private *priv = usb_get_serial_port_data(port);
798 int room = 0;
799 unsigned long flags;
800
801 spin_lock_irqsave(&priv->lock, flags);
802 room = kfifo_avail(&priv->write_fifo);
803 spin_unlock_irqrestore(&priv->lock, flags);
804
805 dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
806 return room;
807}
808
809
810static int cypress_tiocmget(struct tty_struct *tty)
811{
812 struct usb_serial_port *port = tty->driver_data;
813 struct cypress_private *priv = usb_get_serial_port_data(port);
814 __u8 status, control;
815 unsigned int result = 0;
816 unsigned long flags;
817
818 spin_lock_irqsave(&priv->lock, flags);
819 control = priv->line_control;
820 status = priv->current_status;
821 spin_unlock_irqrestore(&priv->lock, flags);
822
823 result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
824 | ((control & CONTROL_RTS) ? TIOCM_RTS : 0)
825 | ((status & UART_CTS) ? TIOCM_CTS : 0)
826 | ((status & UART_DSR) ? TIOCM_DSR : 0)
827 | ((status & UART_RI) ? TIOCM_RI : 0)
828 | ((status & UART_CD) ? TIOCM_CD : 0);
829
830 dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
831
832 return result;
833}
834
835
836static int cypress_tiocmset(struct tty_struct *tty,
837 unsigned int set, unsigned int clear)
838{
839 struct usb_serial_port *port = tty->driver_data;
840 struct cypress_private *priv = usb_get_serial_port_data(port);
841 unsigned long flags;
842
843 spin_lock_irqsave(&priv->lock, flags);
844 if (set & TIOCM_RTS)
845 priv->line_control |= CONTROL_RTS;
846 if (set & TIOCM_DTR)
847 priv->line_control |= CONTROL_DTR;
848 if (clear & TIOCM_RTS)
849 priv->line_control &= ~CONTROL_RTS;
850 if (clear & TIOCM_DTR)
851 priv->line_control &= ~CONTROL_DTR;
852 priv->cmd_ctrl = 1;
853 spin_unlock_irqrestore(&priv->lock, flags);
854
855 return cypress_write(tty, port, NULL, 0);
856}
857
858static void cypress_earthmate_init_termios(struct tty_struct *tty)
859{
860 tty_encode_baud_rate(tty, 4800, 4800);
861}
862
863static void cypress_set_termios(struct tty_struct *tty,
864 struct usb_serial_port *port, struct ktermios *old_termios)
865{
866 struct cypress_private *priv = usb_get_serial_port_data(port);
867 struct device *dev = &port->dev;
868 int data_bits, stop_bits, parity_type, parity_enable;
869 unsigned int cflag;
870 unsigned long flags;
871 __u8 oldlines;
872 int linechange = 0;
873
874 /* Unsupported features need clearing */
875 tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
876
877 cflag = tty->termios.c_cflag;
878
879 /* set number of data bits, parity, stop bits */
880 /* when parity is disabled the parity type bit is ignored */
881
882 /* 1 means 2 stop bits, 0 means 1 stop bit */
883 stop_bits = cflag & CSTOPB ? 1 : 0;
884
885 if (cflag & PARENB) {
886 parity_enable = 1;
887 /* 1 means odd parity, 0 means even parity */
888 parity_type = cflag & PARODD ? 1 : 0;
889 } else
890 parity_enable = parity_type = 0;
891
892 switch (cflag & CSIZE) {
893 case CS5:
894 data_bits = 0;
895 break;
896 case CS6:
897 data_bits = 1;
898 break;
899 case CS7:
900 data_bits = 2;
901 break;
902 case CS8:
903 data_bits = 3;
904 break;
905 default:
906 dev_err(dev, "%s - CSIZE was set, but not CS5-CS8\n", __func__);
907 data_bits = 3;
908 }
909 spin_lock_irqsave(&priv->lock, flags);
910 oldlines = priv->line_control;
911 if ((cflag & CBAUD) == B0) {
912 /* drop dtr and rts */
913 dev_dbg(dev, "%s - dropping the lines, baud rate 0bps\n", __func__);
914 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
915 } else
916 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
917 spin_unlock_irqrestore(&priv->lock, flags);
918
919 dev_dbg(dev, "%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)\n",
920 __func__, stop_bits, parity_enable, parity_type, data_bits);
921
922 cypress_serial_control(tty, port, tty_get_baud_rate(tty),
923 data_bits, stop_bits,
924 parity_enable, parity_type,
925 0, CYPRESS_SET_CONFIG);
926
927 /* we perform a CYPRESS_GET_CONFIG so that the current settings are
928 * filled into the private structure this should confirm that all is
929 * working if it returns what we just set */
930 cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
931
932 /* Here we can define custom tty settings for devices; the main tty
933 * termios flag base comes from empeg.c */
934
935 spin_lock_irqsave(&priv->lock, flags);
936 if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
937 dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n");
938 /* define custom termios settings for NMEA protocol */
939
940 tty->termios.c_iflag /* input modes - */
941 &= ~(IGNBRK /* disable ignore break */
942 | BRKINT /* disable break causes interrupt */
943 | PARMRK /* disable mark parity errors */
944 | ISTRIP /* disable clear high bit of input char */
945 | INLCR /* disable translate NL to CR */
946 | IGNCR /* disable ignore CR */
947 | ICRNL /* disable translate CR to NL */
948 | IXON); /* disable enable XON/XOFF flow control */
949
950 tty->termios.c_oflag /* output modes */
951 &= ~OPOST; /* disable postprocess output char */
952
953 tty->termios.c_lflag /* line discipline modes */
954 &= ~(ECHO /* disable echo input characters */
955 | ECHONL /* disable echo new line */
956 | ICANON /* disable erase, kill, werase, and rprnt
957 special characters */
958 | ISIG /* disable interrupt, quit, and suspend
959 special characters */
960 | IEXTEN); /* disable non-POSIX special characters */
961 } /* CT_CYPHIDCOM: Application should handle this for device */
962
963 linechange = (priv->line_control != oldlines);
964 spin_unlock_irqrestore(&priv->lock, flags);
965
966 /* if necessary, set lines */
967 if (linechange) {
968 priv->cmd_ctrl = 1;
969 cypress_write(tty, port, NULL, 0);
970 }
971} /* cypress_set_termios */
972
973
974/* returns amount of data still left in soft buffer */
975static int cypress_chars_in_buffer(struct tty_struct *tty)
976{
977 struct usb_serial_port *port = tty->driver_data;
978 struct cypress_private *priv = usb_get_serial_port_data(port);
979 int chars = 0;
980 unsigned long flags;
981
982 spin_lock_irqsave(&priv->lock, flags);
983 chars = kfifo_len(&priv->write_fifo);
984 spin_unlock_irqrestore(&priv->lock, flags);
985
986 dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
987 return chars;
988}
989
990
991static void cypress_throttle(struct tty_struct *tty)
992{
993 struct usb_serial_port *port = tty->driver_data;
994 struct cypress_private *priv = usb_get_serial_port_data(port);
995
996 spin_lock_irq(&priv->lock);
997 priv->rx_flags = THROTTLED;
998 spin_unlock_irq(&priv->lock);
999}
1000
1001
1002static void cypress_unthrottle(struct tty_struct *tty)
1003{
1004 struct usb_serial_port *port = tty->driver_data;
1005 struct cypress_private *priv = usb_get_serial_port_data(port);
1006 int actually_throttled, result;
1007
1008 spin_lock_irq(&priv->lock);
1009 actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1010 priv->rx_flags = 0;
1011 spin_unlock_irq(&priv->lock);
1012
1013 if (!priv->comm_is_ok)
1014 return;
1015
1016 if (actually_throttled) {
1017 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
1018 if (result) {
1019 dev_err(&port->dev, "%s - failed submitting read urb, "
1020 "error %d\n", __func__, result);
1021 cypress_set_dead(port);
1022 }
1023 }
1024}
1025
1026
1027static void cypress_read_int_callback(struct urb *urb)
1028{
1029 struct usb_serial_port *port = urb->context;
1030 struct cypress_private *priv = usb_get_serial_port_data(port);
1031 struct device *dev = &urb->dev->dev;
1032 struct tty_struct *tty;
1033 unsigned char *data = urb->transfer_buffer;
1034 unsigned long flags;
1035 char tty_flag = TTY_NORMAL;
1036 int bytes = 0;
1037 int result;
1038 int i = 0;
1039 int status = urb->status;
1040
1041 switch (status) {
1042 case 0: /* success */
1043 break;
1044 case -ECONNRESET:
1045 case -ENOENT:
1046 case -ESHUTDOWN:
1047 /* precursor to disconnect so just go away */
1048 return;
1049 case -EPIPE:
1050 /* Can't call usb_clear_halt while in_interrupt */
1051 fallthrough;
1052 default:
1053 /* something ugly is going on... */
1054 dev_err(dev, "%s - unexpected nonzero read status received: %d\n",
1055 __func__, status);
1056 cypress_set_dead(port);
1057 return;
1058 }
1059
1060 spin_lock_irqsave(&priv->lock, flags);
1061 if (priv->rx_flags & THROTTLED) {
1062 dev_dbg(dev, "%s - now throttling\n", __func__);
1063 priv->rx_flags |= ACTUALLY_THROTTLED;
1064 spin_unlock_irqrestore(&priv->lock, flags);
1065 return;
1066 }
1067 spin_unlock_irqrestore(&priv->lock, flags);
1068
1069 tty = tty_port_tty_get(&port->port);
1070 if (!tty) {
1071 dev_dbg(dev, "%s - bad tty pointer - exiting\n", __func__);
1072 return;
1073 }
1074
1075 spin_lock_irqsave(&priv->lock, flags);
1076 result = urb->actual_length;
1077 switch (priv->pkt_fmt) {
1078 default:
1079 case packet_format_1:
1080 /* This is for the CY7C64013... */
1081 priv->current_status = data[0] & 0xF8;
1082 bytes = data[1] + 2;
1083 i = 2;
1084 break;
1085 case packet_format_2:
1086 /* This is for the CY7C63743... */
1087 priv->current_status = data[0] & 0xF8;
1088 bytes = (data[0] & 0x07) + 1;
1089 i = 1;
1090 break;
1091 }
1092 spin_unlock_irqrestore(&priv->lock, flags);
1093 if (result < bytes) {
1094 dev_dbg(dev,
1095 "%s - wrong packet size - received %d bytes but packet said %d bytes\n",
1096 __func__, result, bytes);
1097 goto continue_read;
1098 }
1099
1100 usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
1101
1102 spin_lock_irqsave(&priv->lock, flags);
1103 /* check to see if status has changed */
1104 if (priv->current_status != priv->prev_status) {
1105 u8 delta = priv->current_status ^ priv->prev_status;
1106
1107 if (delta & UART_MSR_MASK) {
1108 if (delta & UART_CTS)
1109 port->icount.cts++;
1110 if (delta & UART_DSR)
1111 port->icount.dsr++;
1112 if (delta & UART_RI)
1113 port->icount.rng++;
1114 if (delta & UART_CD)
1115 port->icount.dcd++;
1116
1117 wake_up_interruptible(&port->port.delta_msr_wait);
1118 }
1119
1120 priv->prev_status = priv->current_status;
1121 }
1122 spin_unlock_irqrestore(&priv->lock, flags);
1123
1124 /* hangup, as defined in acm.c... this might be a bad place for it
1125 * though */
1126 if (tty && !C_CLOCAL(tty) && !(priv->current_status & UART_CD)) {
1127 dev_dbg(dev, "%s - calling hangup\n", __func__);
1128 tty_hangup(tty);
1129 goto continue_read;
1130 }
1131
1132 /* There is one error bit... I'm assuming it is a parity error
1133 * indicator as the generic firmware will set this bit to 1 if a
1134 * parity error occurs.
1135 * I can not find reference to any other error events. */
1136 spin_lock_irqsave(&priv->lock, flags);
1137 if (priv->current_status & CYP_ERROR) {
1138 spin_unlock_irqrestore(&priv->lock, flags);
1139 tty_flag = TTY_PARITY;
1140 dev_dbg(dev, "%s - Parity Error detected\n", __func__);
1141 } else
1142 spin_unlock_irqrestore(&priv->lock, flags);
1143
1144 /* process read if there is data other than line status */
1145 if (bytes > i) {
1146 tty_insert_flip_string_fixed_flag(&port->port, data + i,
1147 tty_flag, bytes - i);
1148 tty_flip_buffer_push(&port->port);
1149 }
1150
1151 spin_lock_irqsave(&priv->lock, flags);
1152 /* control and status byte(s) are also counted */
1153 priv->bytes_in += bytes;
1154 spin_unlock_irqrestore(&priv->lock, flags);
1155
1156continue_read:
1157 tty_kref_put(tty);
1158
1159 /* Continue trying to always read */
1160
1161 if (priv->comm_is_ok) {
1162 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1163 usb_rcvintpipe(port->serial->dev,
1164 port->interrupt_in_endpointAddress),
1165 port->interrupt_in_urb->transfer_buffer,
1166 port->interrupt_in_urb->transfer_buffer_length,
1167 cypress_read_int_callback, port,
1168 priv->read_urb_interval);
1169 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1170 if (result && result != -EPERM) {
1171 dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
1172 __func__, result);
1173 cypress_set_dead(port);
1174 }
1175 }
1176} /* cypress_read_int_callback */
1177
1178
1179static void cypress_write_int_callback(struct urb *urb)
1180{
1181 struct usb_serial_port *port = urb->context;
1182 struct cypress_private *priv = usb_get_serial_port_data(port);
1183 struct device *dev = &urb->dev->dev;
1184 int status = urb->status;
1185
1186 switch (status) {
1187 case 0:
1188 /* success */
1189 break;
1190 case -ECONNRESET:
1191 case -ENOENT:
1192 case -ESHUTDOWN:
1193 /* this urb is terminated, clean up */
1194 dev_dbg(dev, "%s - urb shutting down with status: %d\n",
1195 __func__, status);
1196 priv->write_urb_in_use = 0;
1197 return;
1198 case -EPIPE:
1199 /* Cannot call usb_clear_halt while in_interrupt */
1200 fallthrough;
1201 default:
1202 dev_err(dev, "%s - unexpected nonzero write status received: %d\n",
1203 __func__, status);
1204 cypress_set_dead(port);
1205 break;
1206 }
1207 priv->write_urb_in_use = 0;
1208
1209 /* send any buffered data */
1210 cypress_send(port);
1211}
1212
1213module_usb_serial_driver(serial_drivers, id_table_combined);
1214
1215MODULE_AUTHOR(DRIVER_AUTHOR);
1216MODULE_DESCRIPTION(DRIVER_DESC);
1217MODULE_LICENSE("GPL");
1218
1219module_param(stats, bool, S_IRUGO | S_IWUSR);
1220MODULE_PARM_DESC(stats, "Enable statistics or not");
1221module_param(interval, int, S_IRUGO | S_IWUSR);
1222MODULE_PARM_DESC(interval, "Overrides interrupt interval");
1223module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR);
1224MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");
1/*
2 * USB Cypress M8 driver
3 *
4 * Copyright (C) 2004
5 * Lonnie Mendez (dignome@gmail.com)
6 * Copyright (C) 2003,2004
7 * Neil Whelchel (koyama@firstlight.net)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * See Documentation/usb/usb-serial.txt for more information on using this
15 * driver
16 *
17 * See http://geocities.com/i0xox0i for information on this driver and the
18 * earthmate usb device.
19 */
20
21/* Thanks to Neil Whelchel for writing the first cypress m8 implementation
22 for linux. */
23/* Thanks to cypress for providing references for the hid reports. */
24/* Thanks to Jiang Zhang for providing links and for general help. */
25/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
26
27
28#include <linux/kernel.h>
29#include <linux/errno.h>
30#include <linux/slab.h>
31#include <linux/tty.h>
32#include <linux/tty_driver.h>
33#include <linux/tty_flip.h>
34#include <linux/module.h>
35#include <linux/moduleparam.h>
36#include <linux/spinlock.h>
37#include <linux/usb.h>
38#include <linux/usb/serial.h>
39#include <linux/serial.h>
40#include <linux/kfifo.h>
41#include <linux/delay.h>
42#include <linux/uaccess.h>
43#include <asm/unaligned.h>
44
45#include "cypress_m8.h"
46
47
48static bool stats;
49static int interval;
50static bool unstable_bauds;
51
52#define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
53#define DRIVER_DESC "Cypress USB to Serial Driver"
54
55/* write buffer size defines */
56#define CYPRESS_BUF_SIZE 1024
57
58static const struct usb_device_id id_table_earthmate[] = {
59 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
60 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
61 { } /* Terminating entry */
62};
63
64static const struct usb_device_id id_table_cyphidcomrs232[] = {
65 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
66 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
67 { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
68 { } /* Terminating entry */
69};
70
71static const struct usb_device_id id_table_nokiaca42v2[] = {
72 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
73 { } /* Terminating entry */
74};
75
76static const struct usb_device_id id_table_combined[] = {
77 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
78 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
79 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
80 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
81 { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
82 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
83 { } /* Terminating entry */
84};
85
86MODULE_DEVICE_TABLE(usb, id_table_combined);
87
88enum packet_format {
89 packet_format_1, /* b0:status, b1:payload count */
90 packet_format_2 /* b0[7:3]:status, b0[2:0]:payload count */
91};
92
93struct cypress_private {
94 spinlock_t lock; /* private lock */
95 int chiptype; /* identifier of device, for quirks/etc */
96 int bytes_in; /* used for statistics */
97 int bytes_out; /* used for statistics */
98 int cmd_count; /* used for statistics */
99 int cmd_ctrl; /* always set this to 1 before issuing a command */
100 struct kfifo write_fifo; /* write fifo */
101 int write_urb_in_use; /* write urb in use indicator */
102 int write_urb_interval; /* interval to use for write urb */
103 int read_urb_interval; /* interval to use for read urb */
104 int comm_is_ok; /* true if communication is (still) ok */
105 int termios_initialized;
106 __u8 line_control; /* holds dtr / rts value */
107 __u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */
108 __u8 current_config; /* stores the current configuration byte */
109 __u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */
110 enum packet_format pkt_fmt; /* format to use for packet send / receive */
111 int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
112 int baud_rate; /* stores current baud rate in
113 integer form */
114 int isthrottled; /* if throttled, discard reads */
115 char prev_status; /* used for TIOCMIWAIT */
116 /* we pass a pointer to this as the argument sent to
117 cypress_set_termios old_termios */
118 struct ktermios tmp_termios; /* stores the old termios settings */
119};
120
121/* function prototypes for the Cypress USB to serial device */
122static int cypress_earthmate_port_probe(struct usb_serial_port *port);
123static int cypress_hidcom_port_probe(struct usb_serial_port *port);
124static int cypress_ca42v2_port_probe(struct usb_serial_port *port);
125static int cypress_port_remove(struct usb_serial_port *port);
126static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
127static void cypress_close(struct usb_serial_port *port);
128static void cypress_dtr_rts(struct usb_serial_port *port, int on);
129static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
130 const unsigned char *buf, int count);
131static void cypress_send(struct usb_serial_port *port);
132static int cypress_write_room(struct tty_struct *tty);
133static void cypress_set_termios(struct tty_struct *tty,
134 struct usb_serial_port *port, struct ktermios *old);
135static int cypress_tiocmget(struct tty_struct *tty);
136static int cypress_tiocmset(struct tty_struct *tty,
137 unsigned int set, unsigned int clear);
138static int cypress_chars_in_buffer(struct tty_struct *tty);
139static void cypress_throttle(struct tty_struct *tty);
140static void cypress_unthrottle(struct tty_struct *tty);
141static void cypress_set_dead(struct usb_serial_port *port);
142static void cypress_read_int_callback(struct urb *urb);
143static void cypress_write_int_callback(struct urb *urb);
144
145static struct usb_serial_driver cypress_earthmate_device = {
146 .driver = {
147 .owner = THIS_MODULE,
148 .name = "earthmate",
149 },
150 .description = "DeLorme Earthmate USB",
151 .id_table = id_table_earthmate,
152 .num_ports = 1,
153 .port_probe = cypress_earthmate_port_probe,
154 .port_remove = cypress_port_remove,
155 .open = cypress_open,
156 .close = cypress_close,
157 .dtr_rts = cypress_dtr_rts,
158 .write = cypress_write,
159 .write_room = cypress_write_room,
160 .set_termios = cypress_set_termios,
161 .tiocmget = cypress_tiocmget,
162 .tiocmset = cypress_tiocmset,
163 .tiocmiwait = usb_serial_generic_tiocmiwait,
164 .chars_in_buffer = cypress_chars_in_buffer,
165 .throttle = cypress_throttle,
166 .unthrottle = cypress_unthrottle,
167 .read_int_callback = cypress_read_int_callback,
168 .write_int_callback = cypress_write_int_callback,
169};
170
171static struct usb_serial_driver cypress_hidcom_device = {
172 .driver = {
173 .owner = THIS_MODULE,
174 .name = "cyphidcom",
175 },
176 .description = "HID->COM RS232 Adapter",
177 .id_table = id_table_cyphidcomrs232,
178 .num_ports = 1,
179 .port_probe = cypress_hidcom_port_probe,
180 .port_remove = cypress_port_remove,
181 .open = cypress_open,
182 .close = cypress_close,
183 .dtr_rts = cypress_dtr_rts,
184 .write = cypress_write,
185 .write_room = cypress_write_room,
186 .set_termios = cypress_set_termios,
187 .tiocmget = cypress_tiocmget,
188 .tiocmset = cypress_tiocmset,
189 .tiocmiwait = usb_serial_generic_tiocmiwait,
190 .chars_in_buffer = cypress_chars_in_buffer,
191 .throttle = cypress_throttle,
192 .unthrottle = cypress_unthrottle,
193 .read_int_callback = cypress_read_int_callback,
194 .write_int_callback = cypress_write_int_callback,
195};
196
197static struct usb_serial_driver cypress_ca42v2_device = {
198 .driver = {
199 .owner = THIS_MODULE,
200 .name = "nokiaca42v2",
201 },
202 .description = "Nokia CA-42 V2 Adapter",
203 .id_table = id_table_nokiaca42v2,
204 .num_ports = 1,
205 .port_probe = cypress_ca42v2_port_probe,
206 .port_remove = cypress_port_remove,
207 .open = cypress_open,
208 .close = cypress_close,
209 .dtr_rts = cypress_dtr_rts,
210 .write = cypress_write,
211 .write_room = cypress_write_room,
212 .set_termios = cypress_set_termios,
213 .tiocmget = cypress_tiocmget,
214 .tiocmset = cypress_tiocmset,
215 .tiocmiwait = usb_serial_generic_tiocmiwait,
216 .chars_in_buffer = cypress_chars_in_buffer,
217 .throttle = cypress_throttle,
218 .unthrottle = cypress_unthrottle,
219 .read_int_callback = cypress_read_int_callback,
220 .write_int_callback = cypress_write_int_callback,
221};
222
223static struct usb_serial_driver * const serial_drivers[] = {
224 &cypress_earthmate_device, &cypress_hidcom_device,
225 &cypress_ca42v2_device, NULL
226};
227
228/*****************************************************************************
229 * Cypress serial helper functions
230 *****************************************************************************/
231
232/* FRWD Dongle hidcom needs to skip reset and speed checks */
233static inline bool is_frwd(struct usb_device *dev)
234{
235 return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
236 (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
237}
238
239static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
240{
241 struct cypress_private *priv;
242 priv = usb_get_serial_port_data(port);
243
244 if (unstable_bauds)
245 return new_rate;
246
247 /* FRWD Dongle uses 115200 bps */
248 if (is_frwd(port->serial->dev))
249 return new_rate;
250
251 /*
252 * The general purpose firmware for the Cypress M8 allows for
253 * a maximum speed of 57600bps (I have no idea whether DeLorme
254 * chose to use the general purpose firmware or not), if you
255 * need to modify this speed setting for your own project
256 * please add your own chiptype and modify the code likewise.
257 * The Cypress HID->COM device will work successfully up to
258 * 115200bps (but the actual throughput is around 3kBps).
259 */
260 if (port->serial->dev->speed == USB_SPEED_LOW) {
261 /*
262 * Mike Isely <isely@pobox.com> 2-Feb-2008: The
263 * Cypress app note that describes this mechanism
264 * states the the low-speed part can't handle more
265 * than 800 bytes/sec, in which case 4800 baud is the
266 * safest speed for a part like that.
267 */
268 if (new_rate > 4800) {
269 dev_dbg(&port->dev,
270 "%s - failed setting baud rate, device incapable speed %d\n",
271 __func__, new_rate);
272 return -1;
273 }
274 }
275 switch (priv->chiptype) {
276 case CT_EARTHMATE:
277 if (new_rate <= 600) {
278 /* 300 and 600 baud rates are supported under
279 * the generic firmware, but are not used with
280 * NMEA and SiRF protocols */
281 dev_dbg(&port->dev,
282 "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS\n",
283 __func__, new_rate);
284 return -1;
285 }
286 break;
287 default:
288 break;
289 }
290 return new_rate;
291}
292
293
294/* This function can either set or retrieve the current serial line settings */
295static int cypress_serial_control(struct tty_struct *tty,
296 struct usb_serial_port *port, speed_t baud_rate, int data_bits,
297 int stop_bits, int parity_enable, int parity_type, int reset,
298 int cypress_request_type)
299{
300 int new_baudrate = 0, retval = 0, tries = 0;
301 struct cypress_private *priv;
302 struct device *dev = &port->dev;
303 u8 *feature_buffer;
304 const unsigned int feature_len = 5;
305 unsigned long flags;
306
307 priv = usb_get_serial_port_data(port);
308
309 if (!priv->comm_is_ok)
310 return -ENODEV;
311
312 feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL);
313 if (!feature_buffer)
314 return -ENOMEM;
315
316 switch (cypress_request_type) {
317 case CYPRESS_SET_CONFIG:
318 /* 0 means 'Hang up' so doesn't change the true bit rate */
319 new_baudrate = priv->baud_rate;
320 if (baud_rate && baud_rate != priv->baud_rate) {
321 dev_dbg(dev, "%s - baud rate is changing\n", __func__);
322 retval = analyze_baud_rate(port, baud_rate);
323 if (retval >= 0) {
324 new_baudrate = retval;
325 dev_dbg(dev, "%s - New baud rate set to %d\n",
326 __func__, new_baudrate);
327 }
328 }
329 dev_dbg(dev, "%s - baud rate is being sent as %d\n", __func__,
330 new_baudrate);
331
332 /* fill the feature_buffer with new configuration */
333 put_unaligned_le32(new_baudrate, feature_buffer);
334 feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */
335 /* 1 bit gap */
336 feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
337 feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */
338 feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */
339 /* 1 bit gap */
340 feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */
341
342 dev_dbg(dev, "%s - device is being sent this feature report:\n", __func__);
343 dev_dbg(dev, "%s - %02X - %02X - %02X - %02X - %02X\n", __func__,
344 feature_buffer[0], feature_buffer[1],
345 feature_buffer[2], feature_buffer[3],
346 feature_buffer[4]);
347
348 do {
349 retval = usb_control_msg(port->serial->dev,
350 usb_sndctrlpipe(port->serial->dev, 0),
351 HID_REQ_SET_REPORT,
352 USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
353 0x0300, 0, feature_buffer,
354 feature_len, 500);
355
356 if (tries++ >= 3)
357 break;
358
359 } while (retval != feature_len &&
360 retval != -ENODEV);
361
362 if (retval != feature_len) {
363 dev_err(dev, "%s - failed sending serial line settings - %d\n",
364 __func__, retval);
365 cypress_set_dead(port);
366 } else {
367 spin_lock_irqsave(&priv->lock, flags);
368 priv->baud_rate = new_baudrate;
369 priv->current_config = feature_buffer[4];
370 spin_unlock_irqrestore(&priv->lock, flags);
371 /* If we asked for a speed change encode it */
372 if (baud_rate)
373 tty_encode_baud_rate(tty,
374 new_baudrate, new_baudrate);
375 }
376 break;
377 case CYPRESS_GET_CONFIG:
378 if (priv->get_cfg_unsafe) {
379 /* Not implemented for this device,
380 and if we try to do it we're likely
381 to crash the hardware. */
382 retval = -ENOTTY;
383 goto out;
384 }
385 dev_dbg(dev, "%s - retreiving serial line settings\n", __func__);
386 do {
387 retval = usb_control_msg(port->serial->dev,
388 usb_rcvctrlpipe(port->serial->dev, 0),
389 HID_REQ_GET_REPORT,
390 USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
391 0x0300, 0, feature_buffer,
392 feature_len, 500);
393
394 if (tries++ >= 3)
395 break;
396 } while (retval != feature_len
397 && retval != -ENODEV);
398
399 if (retval != feature_len) {
400 dev_err(dev, "%s - failed to retrieve serial line settings - %d\n",
401 __func__, retval);
402 cypress_set_dead(port);
403 goto out;
404 } else {
405 spin_lock_irqsave(&priv->lock, flags);
406 /* store the config in one byte, and later
407 use bit masks to check values */
408 priv->current_config = feature_buffer[4];
409 priv->baud_rate = get_unaligned_le32(feature_buffer);
410 spin_unlock_irqrestore(&priv->lock, flags);
411 }
412 }
413 spin_lock_irqsave(&priv->lock, flags);
414 ++priv->cmd_count;
415 spin_unlock_irqrestore(&priv->lock, flags);
416out:
417 kfree(feature_buffer);
418 return retval;
419} /* cypress_serial_control */
420
421
422static void cypress_set_dead(struct usb_serial_port *port)
423{
424 struct cypress_private *priv = usb_get_serial_port_data(port);
425 unsigned long flags;
426
427 spin_lock_irqsave(&priv->lock, flags);
428 if (!priv->comm_is_ok) {
429 spin_unlock_irqrestore(&priv->lock, flags);
430 return;
431 }
432 priv->comm_is_ok = 0;
433 spin_unlock_irqrestore(&priv->lock, flags);
434
435 dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
436 "interval might be too short\n", port->port_number);
437}
438
439
440/*****************************************************************************
441 * Cypress serial driver functions
442 *****************************************************************************/
443
444
445static int cypress_generic_port_probe(struct usb_serial_port *port)
446{
447 struct usb_serial *serial = port->serial;
448 struct cypress_private *priv;
449
450 priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
451 if (!priv)
452 return -ENOMEM;
453
454 priv->comm_is_ok = !0;
455 spin_lock_init(&priv->lock);
456 if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) {
457 kfree(priv);
458 return -ENOMEM;
459 }
460
461 /* Skip reset for FRWD device. It is a workaound:
462 device hangs if it receives SET_CONFIGURE in Configured
463 state. */
464 if (!is_frwd(serial->dev))
465 usb_reset_configuration(serial->dev);
466
467 priv->cmd_ctrl = 0;
468 priv->line_control = 0;
469 priv->termios_initialized = 0;
470 priv->rx_flags = 0;
471 /* Default packet format setting is determined by packet size.
472 Anything with a size larger then 9 must have a separate
473 count field since the 3 bit count field is otherwise too
474 small. Otherwise we can use the slightly more compact
475 format. This is in accordance with the cypress_m8 serial
476 converter app note. */
477 if (port->interrupt_out_size > 9)
478 priv->pkt_fmt = packet_format_1;
479 else
480 priv->pkt_fmt = packet_format_2;
481
482 if (interval > 0) {
483 priv->write_urb_interval = interval;
484 priv->read_urb_interval = interval;
485 dev_dbg(&port->dev, "%s - read & write intervals forced to %d\n",
486 __func__, interval);
487 } else {
488 priv->write_urb_interval = port->interrupt_out_urb->interval;
489 priv->read_urb_interval = port->interrupt_in_urb->interval;
490 dev_dbg(&port->dev, "%s - intervals: read=%d write=%d\n",
491 __func__, priv->read_urb_interval,
492 priv->write_urb_interval);
493 }
494 usb_set_serial_port_data(port, priv);
495
496 port->port.drain_delay = 256;
497
498 return 0;
499}
500
501
502static int cypress_earthmate_port_probe(struct usb_serial_port *port)
503{
504 struct usb_serial *serial = port->serial;
505 struct cypress_private *priv;
506 int ret;
507
508 ret = cypress_generic_port_probe(port);
509 if (ret) {
510 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
511 return ret;
512 }
513
514 priv = usb_get_serial_port_data(port);
515 priv->chiptype = CT_EARTHMATE;
516 /* All Earthmate devices use the separated-count packet
517 format! Idiotic. */
518 priv->pkt_fmt = packet_format_1;
519 if (serial->dev->descriptor.idProduct !=
520 cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
521 /* The old original USB Earthmate seemed able to
522 handle GET_CONFIG requests; everything they've
523 produced since that time crashes if this command is
524 attempted :-( */
525 dev_dbg(&port->dev,
526 "%s - Marking this device as unsafe for GET_CONFIG commands\n",
527 __func__);
528 priv->get_cfg_unsafe = !0;
529 }
530
531 return 0;
532}
533
534static int cypress_hidcom_port_probe(struct usb_serial_port *port)
535{
536 struct cypress_private *priv;
537 int ret;
538
539 ret = cypress_generic_port_probe(port);
540 if (ret) {
541 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
542 return ret;
543 }
544
545 priv = usb_get_serial_port_data(port);
546 priv->chiptype = CT_CYPHIDCOM;
547
548 return 0;
549}
550
551static int cypress_ca42v2_port_probe(struct usb_serial_port *port)
552{
553 struct cypress_private *priv;
554 int ret;
555
556 ret = cypress_generic_port_probe(port);
557 if (ret) {
558 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
559 return ret;
560 }
561
562 priv = usb_get_serial_port_data(port);
563 priv->chiptype = CT_CA42V2;
564
565 return 0;
566}
567
568static int cypress_port_remove(struct usb_serial_port *port)
569{
570 struct cypress_private *priv;
571
572 priv = usb_get_serial_port_data(port);
573
574 kfifo_free(&priv->write_fifo);
575 kfree(priv);
576
577 return 0;
578}
579
580static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
581{
582 struct cypress_private *priv = usb_get_serial_port_data(port);
583 struct usb_serial *serial = port->serial;
584 unsigned long flags;
585 int result = 0;
586
587 if (!priv->comm_is_ok)
588 return -EIO;
589
590 /* clear halts before open */
591 usb_clear_halt(serial->dev, 0x81);
592 usb_clear_halt(serial->dev, 0x02);
593
594 spin_lock_irqsave(&priv->lock, flags);
595 /* reset read/write statistics */
596 priv->bytes_in = 0;
597 priv->bytes_out = 0;
598 priv->cmd_count = 0;
599 priv->rx_flags = 0;
600 spin_unlock_irqrestore(&priv->lock, flags);
601
602 /* Set termios */
603 cypress_send(port);
604
605 if (tty)
606 cypress_set_termios(tty, port, &priv->tmp_termios);
607
608 /* setup the port and start reading from the device */
609 if (!port->interrupt_in_urb) {
610 dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n",
611 __func__);
612 return -1;
613 }
614
615 usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
616 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
617 port->interrupt_in_urb->transfer_buffer,
618 port->interrupt_in_urb->transfer_buffer_length,
619 cypress_read_int_callback, port, priv->read_urb_interval);
620 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
621
622 if (result) {
623 dev_err(&port->dev,
624 "%s - failed submitting read urb, error %d\n",
625 __func__, result);
626 cypress_set_dead(port);
627 }
628
629 return result;
630} /* cypress_open */
631
632static void cypress_dtr_rts(struct usb_serial_port *port, int on)
633{
634 struct cypress_private *priv = usb_get_serial_port_data(port);
635 /* drop dtr and rts */
636 spin_lock_irq(&priv->lock);
637 if (on == 0)
638 priv->line_control = 0;
639 else
640 priv->line_control = CONTROL_DTR | CONTROL_RTS;
641 priv->cmd_ctrl = 1;
642 spin_unlock_irq(&priv->lock);
643 cypress_write(NULL, port, NULL, 0);
644}
645
646static void cypress_close(struct usb_serial_port *port)
647{
648 struct cypress_private *priv = usb_get_serial_port_data(port);
649 unsigned long flags;
650
651 spin_lock_irqsave(&priv->lock, flags);
652 kfifo_reset_out(&priv->write_fifo);
653 spin_unlock_irqrestore(&priv->lock, flags);
654
655 dev_dbg(&port->dev, "%s - stopping urbs\n", __func__);
656 usb_kill_urb(port->interrupt_in_urb);
657 usb_kill_urb(port->interrupt_out_urb);
658
659 if (stats)
660 dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
661 priv->bytes_in, priv->bytes_out, priv->cmd_count);
662} /* cypress_close */
663
664
665static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
666 const unsigned char *buf, int count)
667{
668 struct cypress_private *priv = usb_get_serial_port_data(port);
669
670 dev_dbg(&port->dev, "%s - %d bytes\n", __func__, count);
671
672 /* line control commands, which need to be executed immediately,
673 are not put into the buffer for obvious reasons.
674 */
675 if (priv->cmd_ctrl) {
676 count = 0;
677 goto finish;
678 }
679
680 if (!count)
681 return count;
682
683 count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock);
684
685finish:
686 cypress_send(port);
687
688 return count;
689} /* cypress_write */
690
691
692static void cypress_send(struct usb_serial_port *port)
693{
694 int count = 0, result, offset, actual_size;
695 struct cypress_private *priv = usb_get_serial_port_data(port);
696 struct device *dev = &port->dev;
697 unsigned long flags;
698
699 if (!priv->comm_is_ok)
700 return;
701
702 dev_dbg(dev, "%s - interrupt out size is %d\n", __func__,
703 port->interrupt_out_size);
704
705 spin_lock_irqsave(&priv->lock, flags);
706 if (priv->write_urb_in_use) {
707 dev_dbg(dev, "%s - can't write, urb in use\n", __func__);
708 spin_unlock_irqrestore(&priv->lock, flags);
709 return;
710 }
711 spin_unlock_irqrestore(&priv->lock, flags);
712
713 /* clear buffer */
714 memset(port->interrupt_out_urb->transfer_buffer, 0,
715 port->interrupt_out_size);
716
717 spin_lock_irqsave(&priv->lock, flags);
718 switch (priv->pkt_fmt) {
719 default:
720 case packet_format_1:
721 /* this is for the CY7C64013... */
722 offset = 2;
723 port->interrupt_out_buffer[0] = priv->line_control;
724 break;
725 case packet_format_2:
726 /* this is for the CY7C63743... */
727 offset = 1;
728 port->interrupt_out_buffer[0] = priv->line_control;
729 break;
730 }
731
732 if (priv->line_control & CONTROL_RESET)
733 priv->line_control &= ~CONTROL_RESET;
734
735 if (priv->cmd_ctrl) {
736 priv->cmd_count++;
737 dev_dbg(dev, "%s - line control command being issued\n", __func__);
738 spin_unlock_irqrestore(&priv->lock, flags);
739 goto send;
740 } else
741 spin_unlock_irqrestore(&priv->lock, flags);
742
743 count = kfifo_out_locked(&priv->write_fifo,
744 &port->interrupt_out_buffer[offset],
745 port->interrupt_out_size - offset,
746 &priv->lock);
747 if (count == 0)
748 return;
749
750 switch (priv->pkt_fmt) {
751 default:
752 case packet_format_1:
753 port->interrupt_out_buffer[1] = count;
754 break;
755 case packet_format_2:
756 port->interrupt_out_buffer[0] |= count;
757 }
758
759 dev_dbg(dev, "%s - count is %d\n", __func__, count);
760
761send:
762 spin_lock_irqsave(&priv->lock, flags);
763 priv->write_urb_in_use = 1;
764 spin_unlock_irqrestore(&priv->lock, flags);
765
766 if (priv->cmd_ctrl)
767 actual_size = 1;
768 else
769 actual_size = count +
770 (priv->pkt_fmt == packet_format_1 ? 2 : 1);
771
772 usb_serial_debug_data(dev, __func__, port->interrupt_out_size,
773 port->interrupt_out_urb->transfer_buffer);
774
775 usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
776 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
777 port->interrupt_out_buffer, port->interrupt_out_size,
778 cypress_write_int_callback, port, priv->write_urb_interval);
779 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
780 if (result) {
781 dev_err_console(port,
782 "%s - failed submitting write urb, error %d\n",
783 __func__, result);
784 priv->write_urb_in_use = 0;
785 cypress_set_dead(port);
786 }
787
788 spin_lock_irqsave(&priv->lock, flags);
789 if (priv->cmd_ctrl)
790 priv->cmd_ctrl = 0;
791
792 /* do not count the line control and size bytes */
793 priv->bytes_out += count;
794 spin_unlock_irqrestore(&priv->lock, flags);
795
796 usb_serial_port_softint(port);
797} /* cypress_send */
798
799
800/* returns how much space is available in the soft buffer */
801static int cypress_write_room(struct tty_struct *tty)
802{
803 struct usb_serial_port *port = tty->driver_data;
804 struct cypress_private *priv = usb_get_serial_port_data(port);
805 int room = 0;
806 unsigned long flags;
807
808 spin_lock_irqsave(&priv->lock, flags);
809 room = kfifo_avail(&priv->write_fifo);
810 spin_unlock_irqrestore(&priv->lock, flags);
811
812 dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
813 return room;
814}
815
816
817static int cypress_tiocmget(struct tty_struct *tty)
818{
819 struct usb_serial_port *port = tty->driver_data;
820 struct cypress_private *priv = usb_get_serial_port_data(port);
821 __u8 status, control;
822 unsigned int result = 0;
823 unsigned long flags;
824
825 spin_lock_irqsave(&priv->lock, flags);
826 control = priv->line_control;
827 status = priv->current_status;
828 spin_unlock_irqrestore(&priv->lock, flags);
829
830 result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
831 | ((control & CONTROL_RTS) ? TIOCM_RTS : 0)
832 | ((status & UART_CTS) ? TIOCM_CTS : 0)
833 | ((status & UART_DSR) ? TIOCM_DSR : 0)
834 | ((status & UART_RI) ? TIOCM_RI : 0)
835 | ((status & UART_CD) ? TIOCM_CD : 0);
836
837 dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
838
839 return result;
840}
841
842
843static int cypress_tiocmset(struct tty_struct *tty,
844 unsigned int set, unsigned int clear)
845{
846 struct usb_serial_port *port = tty->driver_data;
847 struct cypress_private *priv = usb_get_serial_port_data(port);
848 unsigned long flags;
849
850 spin_lock_irqsave(&priv->lock, flags);
851 if (set & TIOCM_RTS)
852 priv->line_control |= CONTROL_RTS;
853 if (set & TIOCM_DTR)
854 priv->line_control |= CONTROL_DTR;
855 if (clear & TIOCM_RTS)
856 priv->line_control &= ~CONTROL_RTS;
857 if (clear & TIOCM_DTR)
858 priv->line_control &= ~CONTROL_DTR;
859 priv->cmd_ctrl = 1;
860 spin_unlock_irqrestore(&priv->lock, flags);
861
862 return cypress_write(tty, port, NULL, 0);
863}
864
865static void cypress_set_termios(struct tty_struct *tty,
866 struct usb_serial_port *port, struct ktermios *old_termios)
867{
868 struct cypress_private *priv = usb_get_serial_port_data(port);
869 struct device *dev = &port->dev;
870 int data_bits, stop_bits, parity_type, parity_enable;
871 unsigned cflag, iflag;
872 unsigned long flags;
873 __u8 oldlines;
874 int linechange = 0;
875
876 spin_lock_irqsave(&priv->lock, flags);
877 /* We can't clean this one up as we don't know the device type
878 early enough */
879 if (!priv->termios_initialized) {
880 if (priv->chiptype == CT_EARTHMATE) {
881 tty->termios = tty_std_termios;
882 tty->termios.c_cflag = B4800 | CS8 | CREAD | HUPCL |
883 CLOCAL;
884 tty->termios.c_ispeed = 4800;
885 tty->termios.c_ospeed = 4800;
886 } else if (priv->chiptype == CT_CYPHIDCOM) {
887 tty->termios = tty_std_termios;
888 tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
889 CLOCAL;
890 tty->termios.c_ispeed = 9600;
891 tty->termios.c_ospeed = 9600;
892 } else if (priv->chiptype == CT_CA42V2) {
893 tty->termios = tty_std_termios;
894 tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
895 CLOCAL;
896 tty->termios.c_ispeed = 9600;
897 tty->termios.c_ospeed = 9600;
898 }
899 priv->termios_initialized = 1;
900 }
901 spin_unlock_irqrestore(&priv->lock, flags);
902
903 /* Unsupported features need clearing */
904 tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
905
906 cflag = tty->termios.c_cflag;
907 iflag = tty->termios.c_iflag;
908
909 /* check if there are new settings */
910 if (old_termios) {
911 spin_lock_irqsave(&priv->lock, flags);
912 priv->tmp_termios = tty->termios;
913 spin_unlock_irqrestore(&priv->lock, flags);
914 }
915
916 /* set number of data bits, parity, stop bits */
917 /* when parity is disabled the parity type bit is ignored */
918
919 /* 1 means 2 stop bits, 0 means 1 stop bit */
920 stop_bits = cflag & CSTOPB ? 1 : 0;
921
922 if (cflag & PARENB) {
923 parity_enable = 1;
924 /* 1 means odd parity, 0 means even parity */
925 parity_type = cflag & PARODD ? 1 : 0;
926 } else
927 parity_enable = parity_type = 0;
928
929 switch (cflag & CSIZE) {
930 case CS5:
931 data_bits = 0;
932 break;
933 case CS6:
934 data_bits = 1;
935 break;
936 case CS7:
937 data_bits = 2;
938 break;
939 case CS8:
940 data_bits = 3;
941 break;
942 default:
943 dev_err(dev, "%s - CSIZE was set, but not CS5-CS8\n", __func__);
944 data_bits = 3;
945 }
946 spin_lock_irqsave(&priv->lock, flags);
947 oldlines = priv->line_control;
948 if ((cflag & CBAUD) == B0) {
949 /* drop dtr and rts */
950 dev_dbg(dev, "%s - dropping the lines, baud rate 0bps\n", __func__);
951 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
952 } else
953 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
954 spin_unlock_irqrestore(&priv->lock, flags);
955
956 dev_dbg(dev, "%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)\n",
957 __func__, stop_bits, parity_enable, parity_type, data_bits);
958
959 cypress_serial_control(tty, port, tty_get_baud_rate(tty),
960 data_bits, stop_bits,
961 parity_enable, parity_type,
962 0, CYPRESS_SET_CONFIG);
963
964 /* we perform a CYPRESS_GET_CONFIG so that the current settings are
965 * filled into the private structure this should confirm that all is
966 * working if it returns what we just set */
967 cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
968
969 /* Here we can define custom tty settings for devices; the main tty
970 * termios flag base comes from empeg.c */
971
972 spin_lock_irqsave(&priv->lock, flags);
973 if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
974 dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n");
975 /* define custom termios settings for NMEA protocol */
976
977 tty->termios.c_iflag /* input modes - */
978 &= ~(IGNBRK /* disable ignore break */
979 | BRKINT /* disable break causes interrupt */
980 | PARMRK /* disable mark parity errors */
981 | ISTRIP /* disable clear high bit of input char */
982 | INLCR /* disable translate NL to CR */
983 | IGNCR /* disable ignore CR */
984 | ICRNL /* disable translate CR to NL */
985 | IXON); /* disable enable XON/XOFF flow control */
986
987 tty->termios.c_oflag /* output modes */
988 &= ~OPOST; /* disable postprocess output char */
989
990 tty->termios.c_lflag /* line discipline modes */
991 &= ~(ECHO /* disable echo input characters */
992 | ECHONL /* disable echo new line */
993 | ICANON /* disable erase, kill, werase, and rprnt
994 special characters */
995 | ISIG /* disable interrupt, quit, and suspend
996 special characters */
997 | IEXTEN); /* disable non-POSIX special characters */
998 } /* CT_CYPHIDCOM: Application should handle this for device */
999
1000 linechange = (priv->line_control != oldlines);
1001 spin_unlock_irqrestore(&priv->lock, flags);
1002
1003 /* if necessary, set lines */
1004 if (linechange) {
1005 priv->cmd_ctrl = 1;
1006 cypress_write(tty, port, NULL, 0);
1007 }
1008} /* cypress_set_termios */
1009
1010
1011/* returns amount of data still left in soft buffer */
1012static int cypress_chars_in_buffer(struct tty_struct *tty)
1013{
1014 struct usb_serial_port *port = tty->driver_data;
1015 struct cypress_private *priv = usb_get_serial_port_data(port);
1016 int chars = 0;
1017 unsigned long flags;
1018
1019 spin_lock_irqsave(&priv->lock, flags);
1020 chars = kfifo_len(&priv->write_fifo);
1021 spin_unlock_irqrestore(&priv->lock, flags);
1022
1023 dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
1024 return chars;
1025}
1026
1027
1028static void cypress_throttle(struct tty_struct *tty)
1029{
1030 struct usb_serial_port *port = tty->driver_data;
1031 struct cypress_private *priv = usb_get_serial_port_data(port);
1032
1033 spin_lock_irq(&priv->lock);
1034 priv->rx_flags = THROTTLED;
1035 spin_unlock_irq(&priv->lock);
1036}
1037
1038
1039static void cypress_unthrottle(struct tty_struct *tty)
1040{
1041 struct usb_serial_port *port = tty->driver_data;
1042 struct cypress_private *priv = usb_get_serial_port_data(port);
1043 int actually_throttled, result;
1044
1045 spin_lock_irq(&priv->lock);
1046 actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1047 priv->rx_flags = 0;
1048 spin_unlock_irq(&priv->lock);
1049
1050 if (!priv->comm_is_ok)
1051 return;
1052
1053 if (actually_throttled) {
1054 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
1055 if (result) {
1056 dev_err(&port->dev, "%s - failed submitting read urb, "
1057 "error %d\n", __func__, result);
1058 cypress_set_dead(port);
1059 }
1060 }
1061}
1062
1063
1064static void cypress_read_int_callback(struct urb *urb)
1065{
1066 struct usb_serial_port *port = urb->context;
1067 struct cypress_private *priv = usb_get_serial_port_data(port);
1068 struct device *dev = &urb->dev->dev;
1069 struct tty_struct *tty;
1070 unsigned char *data = urb->transfer_buffer;
1071 unsigned long flags;
1072 char tty_flag = TTY_NORMAL;
1073 int havedata = 0;
1074 int bytes = 0;
1075 int result;
1076 int i = 0;
1077 int status = urb->status;
1078
1079 switch (status) {
1080 case 0: /* success */
1081 break;
1082 case -ECONNRESET:
1083 case -ENOENT:
1084 case -ESHUTDOWN:
1085 /* precursor to disconnect so just go away */
1086 return;
1087 case -EPIPE:
1088 /* Can't call usb_clear_halt while in_interrupt */
1089 /* FALLS THROUGH */
1090 default:
1091 /* something ugly is going on... */
1092 dev_err(dev, "%s - unexpected nonzero read status received: %d\n",
1093 __func__, status);
1094 cypress_set_dead(port);
1095 return;
1096 }
1097
1098 spin_lock_irqsave(&priv->lock, flags);
1099 if (priv->rx_flags & THROTTLED) {
1100 dev_dbg(dev, "%s - now throttling\n", __func__);
1101 priv->rx_flags |= ACTUALLY_THROTTLED;
1102 spin_unlock_irqrestore(&priv->lock, flags);
1103 return;
1104 }
1105 spin_unlock_irqrestore(&priv->lock, flags);
1106
1107 tty = tty_port_tty_get(&port->port);
1108 if (!tty) {
1109 dev_dbg(dev, "%s - bad tty pointer - exiting\n", __func__);
1110 return;
1111 }
1112
1113 spin_lock_irqsave(&priv->lock, flags);
1114 result = urb->actual_length;
1115 switch (priv->pkt_fmt) {
1116 default:
1117 case packet_format_1:
1118 /* This is for the CY7C64013... */
1119 priv->current_status = data[0] & 0xF8;
1120 bytes = data[1] + 2;
1121 i = 2;
1122 if (bytes > 2)
1123 havedata = 1;
1124 break;
1125 case packet_format_2:
1126 /* This is for the CY7C63743... */
1127 priv->current_status = data[0] & 0xF8;
1128 bytes = (data[0] & 0x07) + 1;
1129 i = 1;
1130 if (bytes > 1)
1131 havedata = 1;
1132 break;
1133 }
1134 spin_unlock_irqrestore(&priv->lock, flags);
1135 if (result < bytes) {
1136 dev_dbg(dev,
1137 "%s - wrong packet size - received %d bytes but packet said %d bytes\n",
1138 __func__, result, bytes);
1139 goto continue_read;
1140 }
1141
1142 usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
1143
1144 spin_lock_irqsave(&priv->lock, flags);
1145 /* check to see if status has changed */
1146 if (priv->current_status != priv->prev_status) {
1147 u8 delta = priv->current_status ^ priv->prev_status;
1148
1149 if (delta & UART_MSR_MASK) {
1150 if (delta & UART_CTS)
1151 port->icount.cts++;
1152 if (delta & UART_DSR)
1153 port->icount.dsr++;
1154 if (delta & UART_RI)
1155 port->icount.rng++;
1156 if (delta & UART_CD)
1157 port->icount.dcd++;
1158
1159 wake_up_interruptible(&port->port.delta_msr_wait);
1160 }
1161
1162 priv->prev_status = priv->current_status;
1163 }
1164 spin_unlock_irqrestore(&priv->lock, flags);
1165
1166 /* hangup, as defined in acm.c... this might be a bad place for it
1167 * though */
1168 if (tty && !(tty->termios.c_cflag & CLOCAL) &&
1169 !(priv->current_status & UART_CD)) {
1170 dev_dbg(dev, "%s - calling hangup\n", __func__);
1171 tty_hangup(tty);
1172 goto continue_read;
1173 }
1174
1175 /* There is one error bit... I'm assuming it is a parity error
1176 * indicator as the generic firmware will set this bit to 1 if a
1177 * parity error occurs.
1178 * I can not find reference to any other error events. */
1179 spin_lock_irqsave(&priv->lock, flags);
1180 if (priv->current_status & CYP_ERROR) {
1181 spin_unlock_irqrestore(&priv->lock, flags);
1182 tty_flag = TTY_PARITY;
1183 dev_dbg(dev, "%s - Parity Error detected\n", __func__);
1184 } else
1185 spin_unlock_irqrestore(&priv->lock, flags);
1186
1187 /* process read if there is data other than line status */
1188 if (bytes > i) {
1189 tty_insert_flip_string_fixed_flag(&port->port, data + i,
1190 tty_flag, bytes - i);
1191 tty_flip_buffer_push(&port->port);
1192 }
1193
1194 spin_lock_irqsave(&priv->lock, flags);
1195 /* control and status byte(s) are also counted */
1196 priv->bytes_in += bytes;
1197 spin_unlock_irqrestore(&priv->lock, flags);
1198
1199continue_read:
1200 tty_kref_put(tty);
1201
1202 /* Continue trying to always read */
1203
1204 if (priv->comm_is_ok) {
1205 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1206 usb_rcvintpipe(port->serial->dev,
1207 port->interrupt_in_endpointAddress),
1208 port->interrupt_in_urb->transfer_buffer,
1209 port->interrupt_in_urb->transfer_buffer_length,
1210 cypress_read_int_callback, port,
1211 priv->read_urb_interval);
1212 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1213 if (result && result != -EPERM) {
1214 dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
1215 __func__, result);
1216 cypress_set_dead(port);
1217 }
1218 }
1219} /* cypress_read_int_callback */
1220
1221
1222static void cypress_write_int_callback(struct urb *urb)
1223{
1224 struct usb_serial_port *port = urb->context;
1225 struct cypress_private *priv = usb_get_serial_port_data(port);
1226 struct device *dev = &urb->dev->dev;
1227 int status = urb->status;
1228
1229 switch (status) {
1230 case 0:
1231 /* success */
1232 break;
1233 case -ECONNRESET:
1234 case -ENOENT:
1235 case -ESHUTDOWN:
1236 /* this urb is terminated, clean up */
1237 dev_dbg(dev, "%s - urb shutting down with status: %d\n",
1238 __func__, status);
1239 priv->write_urb_in_use = 0;
1240 return;
1241 case -EPIPE:
1242 /* Cannot call usb_clear_halt while in_interrupt */
1243 /* FALLTHROUGH */
1244 default:
1245 dev_err(dev, "%s - unexpected nonzero write status received: %d\n",
1246 __func__, status);
1247 cypress_set_dead(port);
1248 break;
1249 }
1250 priv->write_urb_in_use = 0;
1251
1252 /* send any buffered data */
1253 cypress_send(port);
1254}
1255
1256module_usb_serial_driver(serial_drivers, id_table_combined);
1257
1258MODULE_AUTHOR(DRIVER_AUTHOR);
1259MODULE_DESCRIPTION(DRIVER_DESC);
1260MODULE_LICENSE("GPL");
1261
1262module_param(stats, bool, S_IRUGO | S_IWUSR);
1263MODULE_PARM_DESC(stats, "Enable statistics or not");
1264module_param(interval, int, S_IRUGO | S_IWUSR);
1265MODULE_PARM_DESC(interval, "Overrides interrupt interval");
1266module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR);
1267MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");