Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * ST Microelectronics MFD: stmpe's driver
4 *
5 * Copyright (C) ST-Ericsson SA 2010
6 *
7 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
8 */
9
10#include <linux/err.h>
11#include <linux/gpio.h>
12#include <linux/export.h>
13#include <linux/kernel.h>
14#include <linux/interrupt.h>
15#include <linux/irq.h>
16#include <linux/irqdomain.h>
17#include <linux/of.h>
18#include <linux/of_gpio.h>
19#include <linux/pm.h>
20#include <linux/slab.h>
21#include <linux/mfd/core.h>
22#include <linux/delay.h>
23#include <linux/regulator/consumer.h>
24#include "stmpe.h"
25
26/**
27 * struct stmpe_platform_data - STMPE platform data
28 * @id: device id to distinguish between multiple STMPEs on the same board
29 * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
30 * @irq_trigger: IRQ trigger to use for the interrupt to the host
31 * @autosleep: bool to enable/disable stmpe autosleep
32 * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
33 * @irq_over_gpio: true if gpio is used to get irq
34 * @irq_gpio: gpio number over which irq will be requested (significant only if
35 * irq_over_gpio is true)
36 */
37struct stmpe_platform_data {
38 int id;
39 unsigned int blocks;
40 unsigned int irq_trigger;
41 bool autosleep;
42 bool irq_over_gpio;
43 int irq_gpio;
44 int autosleep_timeout;
45};
46
47static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
48{
49 return stmpe->variant->enable(stmpe, blocks, true);
50}
51
52static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
53{
54 return stmpe->variant->enable(stmpe, blocks, false);
55}
56
57static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg)
58{
59 int ret;
60
61 ret = stmpe->ci->read_byte(stmpe, reg);
62 if (ret < 0)
63 dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret);
64
65 dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
66
67 return ret;
68}
69
70static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
71{
72 int ret;
73
74 dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
75
76 ret = stmpe->ci->write_byte(stmpe, reg, val);
77 if (ret < 0)
78 dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret);
79
80 return ret;
81}
82
83static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
84{
85 int ret;
86
87 ret = __stmpe_reg_read(stmpe, reg);
88 if (ret < 0)
89 return ret;
90
91 ret &= ~mask;
92 ret |= val;
93
94 return __stmpe_reg_write(stmpe, reg, ret);
95}
96
97static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
98 u8 *values)
99{
100 int ret;
101
102 ret = stmpe->ci->read_block(stmpe, reg, length, values);
103 if (ret < 0)
104 dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret);
105
106 dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
107 stmpe_dump_bytes("stmpe rd: ", values, length);
108
109 return ret;
110}
111
112static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
113 const u8 *values)
114{
115 int ret;
116
117 dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
118 stmpe_dump_bytes("stmpe wr: ", values, length);
119
120 ret = stmpe->ci->write_block(stmpe, reg, length, values);
121 if (ret < 0)
122 dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret);
123
124 return ret;
125}
126
127/**
128 * stmpe_enable - enable blocks on an STMPE device
129 * @stmpe: Device to work on
130 * @blocks: Mask of blocks (enum stmpe_block values) to enable
131 */
132int stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
133{
134 int ret;
135
136 mutex_lock(&stmpe->lock);
137 ret = __stmpe_enable(stmpe, blocks);
138 mutex_unlock(&stmpe->lock);
139
140 return ret;
141}
142EXPORT_SYMBOL_GPL(stmpe_enable);
143
144/**
145 * stmpe_disable - disable blocks on an STMPE device
146 * @stmpe: Device to work on
147 * @blocks: Mask of blocks (enum stmpe_block values) to enable
148 */
149int stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
150{
151 int ret;
152
153 mutex_lock(&stmpe->lock);
154 ret = __stmpe_disable(stmpe, blocks);
155 mutex_unlock(&stmpe->lock);
156
157 return ret;
158}
159EXPORT_SYMBOL_GPL(stmpe_disable);
160
161/**
162 * stmpe_reg_read() - read a single STMPE register
163 * @stmpe: Device to read from
164 * @reg: Register to read
165 */
166int stmpe_reg_read(struct stmpe *stmpe, u8 reg)
167{
168 int ret;
169
170 mutex_lock(&stmpe->lock);
171 ret = __stmpe_reg_read(stmpe, reg);
172 mutex_unlock(&stmpe->lock);
173
174 return ret;
175}
176EXPORT_SYMBOL_GPL(stmpe_reg_read);
177
178/**
179 * stmpe_reg_write() - write a single STMPE register
180 * @stmpe: Device to write to
181 * @reg: Register to write
182 * @val: Value to write
183 */
184int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
185{
186 int ret;
187
188 mutex_lock(&stmpe->lock);
189 ret = __stmpe_reg_write(stmpe, reg, val);
190 mutex_unlock(&stmpe->lock);
191
192 return ret;
193}
194EXPORT_SYMBOL_GPL(stmpe_reg_write);
195
196/**
197 * stmpe_set_bits() - set the value of a bitfield in a STMPE register
198 * @stmpe: Device to write to
199 * @reg: Register to write
200 * @mask: Mask of bits to set
201 * @val: Value to set
202 */
203int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
204{
205 int ret;
206
207 mutex_lock(&stmpe->lock);
208 ret = __stmpe_set_bits(stmpe, reg, mask, val);
209 mutex_unlock(&stmpe->lock);
210
211 return ret;
212}
213EXPORT_SYMBOL_GPL(stmpe_set_bits);
214
215/**
216 * stmpe_block_read() - read multiple STMPE registers
217 * @stmpe: Device to read from
218 * @reg: First register
219 * @length: Number of registers
220 * @values: Buffer to write to
221 */
222int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
223{
224 int ret;
225
226 mutex_lock(&stmpe->lock);
227 ret = __stmpe_block_read(stmpe, reg, length, values);
228 mutex_unlock(&stmpe->lock);
229
230 return ret;
231}
232EXPORT_SYMBOL_GPL(stmpe_block_read);
233
234/**
235 * stmpe_block_write() - write multiple STMPE registers
236 * @stmpe: Device to write to
237 * @reg: First register
238 * @length: Number of registers
239 * @values: Values to write
240 */
241int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
242 const u8 *values)
243{
244 int ret;
245
246 mutex_lock(&stmpe->lock);
247 ret = __stmpe_block_write(stmpe, reg, length, values);
248 mutex_unlock(&stmpe->lock);
249
250 return ret;
251}
252EXPORT_SYMBOL_GPL(stmpe_block_write);
253
254/**
255 * stmpe_set_altfunc()- set the alternate function for STMPE pins
256 * @stmpe: Device to configure
257 * @pins: Bitmask of pins to affect
258 * @block: block to enable alternate functions for
259 *
260 * @pins is assumed to have a bit set for each of the bits whose alternate
261 * function is to be changed, numbered according to the GPIOXY numbers.
262 *
263 * If the GPIO module is not enabled, this function automatically enables it in
264 * order to perform the change.
265 */
266int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block)
267{
268 struct stmpe_variant_info *variant = stmpe->variant;
269 u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB];
270 int af_bits = variant->af_bits;
271 int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8);
272 int mask = (1 << af_bits) - 1;
273 u8 regs[8];
274 int af, afperreg, ret;
275
276 if (!variant->get_altfunc)
277 return 0;
278
279 afperreg = 8 / af_bits;
280 mutex_lock(&stmpe->lock);
281
282 ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
283 if (ret < 0)
284 goto out;
285
286 ret = __stmpe_block_read(stmpe, regaddr, numregs, regs);
287 if (ret < 0)
288 goto out;
289
290 af = variant->get_altfunc(stmpe, block);
291
292 while (pins) {
293 int pin = __ffs(pins);
294 int regoffset = numregs - (pin / afperreg) - 1;
295 int pos = (pin % afperreg) * (8 / afperreg);
296
297 regs[regoffset] &= ~(mask << pos);
298 regs[regoffset] |= af << pos;
299
300 pins &= ~(1 << pin);
301 }
302
303 ret = __stmpe_block_write(stmpe, regaddr, numregs, regs);
304
305out:
306 mutex_unlock(&stmpe->lock);
307 return ret;
308}
309EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
310
311/*
312 * GPIO (all variants)
313 */
314
315static struct resource stmpe_gpio_resources[] = {
316 /* Start and end filled dynamically */
317 {
318 .flags = IORESOURCE_IRQ,
319 },
320};
321
322static const struct mfd_cell stmpe_gpio_cell = {
323 .name = "stmpe-gpio",
324 .of_compatible = "st,stmpe-gpio",
325 .resources = stmpe_gpio_resources,
326 .num_resources = ARRAY_SIZE(stmpe_gpio_resources),
327};
328
329static const struct mfd_cell stmpe_gpio_cell_noirq = {
330 .name = "stmpe-gpio",
331 .of_compatible = "st,stmpe-gpio",
332 /* gpio cell resources consist of an irq only so no resources here */
333};
334
335/*
336 * Keypad (1601, 2401, 2403)
337 */
338
339static struct resource stmpe_keypad_resources[] = {
340 {
341 .name = "KEYPAD",
342 .flags = IORESOURCE_IRQ,
343 },
344 {
345 .name = "KEYPAD_OVER",
346 .flags = IORESOURCE_IRQ,
347 },
348};
349
350static const struct mfd_cell stmpe_keypad_cell = {
351 .name = "stmpe-keypad",
352 .of_compatible = "st,stmpe-keypad",
353 .resources = stmpe_keypad_resources,
354 .num_resources = ARRAY_SIZE(stmpe_keypad_resources),
355};
356
357/*
358 * PWM (1601, 2401, 2403)
359 */
360static struct resource stmpe_pwm_resources[] = {
361 {
362 .name = "PWM0",
363 .flags = IORESOURCE_IRQ,
364 },
365 {
366 .name = "PWM1",
367 .flags = IORESOURCE_IRQ,
368 },
369 {
370 .name = "PWM2",
371 .flags = IORESOURCE_IRQ,
372 },
373};
374
375static const struct mfd_cell stmpe_pwm_cell = {
376 .name = "stmpe-pwm",
377 .of_compatible = "st,stmpe-pwm",
378 .resources = stmpe_pwm_resources,
379 .num_resources = ARRAY_SIZE(stmpe_pwm_resources),
380};
381
382/*
383 * STMPE801
384 */
385static const u8 stmpe801_regs[] = {
386 [STMPE_IDX_CHIP_ID] = STMPE801_REG_CHIP_ID,
387 [STMPE_IDX_ICR_LSB] = STMPE801_REG_SYS_CTRL,
388 [STMPE_IDX_GPMR_LSB] = STMPE801_REG_GPIO_MP_STA,
389 [STMPE_IDX_GPSR_LSB] = STMPE801_REG_GPIO_SET_PIN,
390 [STMPE_IDX_GPCR_LSB] = STMPE801_REG_GPIO_SET_PIN,
391 [STMPE_IDX_GPDR_LSB] = STMPE801_REG_GPIO_DIR,
392 [STMPE_IDX_IEGPIOR_LSB] = STMPE801_REG_GPIO_INT_EN,
393 [STMPE_IDX_ISGPIOR_MSB] = STMPE801_REG_GPIO_INT_STA,
394
395};
396
397static struct stmpe_variant_block stmpe801_blocks[] = {
398 {
399 .cell = &stmpe_gpio_cell,
400 .irq = 0,
401 .block = STMPE_BLOCK_GPIO,
402 },
403};
404
405static struct stmpe_variant_block stmpe801_blocks_noirq[] = {
406 {
407 .cell = &stmpe_gpio_cell_noirq,
408 .block = STMPE_BLOCK_GPIO,
409 },
410};
411
412static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks,
413 bool enable)
414{
415 if (blocks & STMPE_BLOCK_GPIO)
416 return 0;
417 else
418 return -EINVAL;
419}
420
421static struct stmpe_variant_info stmpe801 = {
422 .name = "stmpe801",
423 .id_val = STMPE801_ID,
424 .id_mask = 0xffff,
425 .num_gpios = 8,
426 .regs = stmpe801_regs,
427 .blocks = stmpe801_blocks,
428 .num_blocks = ARRAY_SIZE(stmpe801_blocks),
429 .num_irqs = STMPE801_NR_INTERNAL_IRQS,
430 .enable = stmpe801_enable,
431};
432
433static struct stmpe_variant_info stmpe801_noirq = {
434 .name = "stmpe801",
435 .id_val = STMPE801_ID,
436 .id_mask = 0xffff,
437 .num_gpios = 8,
438 .regs = stmpe801_regs,
439 .blocks = stmpe801_blocks_noirq,
440 .num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq),
441 .enable = stmpe801_enable,
442};
443
444/*
445 * Touchscreen (STMPE811 or STMPE610)
446 */
447
448static struct resource stmpe_ts_resources[] = {
449 {
450 .name = "TOUCH_DET",
451 .flags = IORESOURCE_IRQ,
452 },
453 {
454 .name = "FIFO_TH",
455 .flags = IORESOURCE_IRQ,
456 },
457};
458
459static const struct mfd_cell stmpe_ts_cell = {
460 .name = "stmpe-ts",
461 .of_compatible = "st,stmpe-ts",
462 .resources = stmpe_ts_resources,
463 .num_resources = ARRAY_SIZE(stmpe_ts_resources),
464};
465
466/*
467 * ADC (STMPE811)
468 */
469
470static struct resource stmpe_adc_resources[] = {
471 {
472 .name = "STMPE_TEMP_SENS",
473 .flags = IORESOURCE_IRQ,
474 },
475 {
476 .name = "STMPE_ADC",
477 .flags = IORESOURCE_IRQ,
478 },
479};
480
481static const struct mfd_cell stmpe_adc_cell = {
482 .name = "stmpe-adc",
483 .of_compatible = "st,stmpe-adc",
484 .resources = stmpe_adc_resources,
485 .num_resources = ARRAY_SIZE(stmpe_adc_resources),
486};
487
488/*
489 * STMPE811 or STMPE610
490 */
491
492static const u8 stmpe811_regs[] = {
493 [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID,
494 [STMPE_IDX_SYS_CTRL] = STMPE811_REG_SYS_CTRL,
495 [STMPE_IDX_SYS_CTRL2] = STMPE811_REG_SYS_CTRL2,
496 [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL,
497 [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN,
498 [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA,
499 [STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA,
500 [STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN,
501 [STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN,
502 [STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR,
503 [STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE,
504 [STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE,
505 [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF,
506 [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN,
507 [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA,
508 [STMPE_IDX_GPEDR_LSB] = STMPE811_REG_GPIO_ED,
509};
510
511static struct stmpe_variant_block stmpe811_blocks[] = {
512 {
513 .cell = &stmpe_gpio_cell,
514 .irq = STMPE811_IRQ_GPIOC,
515 .block = STMPE_BLOCK_GPIO,
516 },
517 {
518 .cell = &stmpe_ts_cell,
519 .irq = STMPE811_IRQ_TOUCH_DET,
520 .block = STMPE_BLOCK_TOUCHSCREEN,
521 },
522 {
523 .cell = &stmpe_adc_cell,
524 .irq = STMPE811_IRQ_TEMP_SENS,
525 .block = STMPE_BLOCK_ADC,
526 },
527};
528
529static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
530 bool enable)
531{
532 unsigned int mask = 0;
533
534 if (blocks & STMPE_BLOCK_GPIO)
535 mask |= STMPE811_SYS_CTRL2_GPIO_OFF;
536
537 if (blocks & STMPE_BLOCK_ADC)
538 mask |= STMPE811_SYS_CTRL2_ADC_OFF;
539
540 if (blocks & STMPE_BLOCK_TOUCHSCREEN)
541 mask |= STMPE811_SYS_CTRL2_TSC_OFF;
542
543 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2], mask,
544 enable ? 0 : mask);
545}
546
547int stmpe811_adc_common_init(struct stmpe *stmpe)
548{
549 int ret;
550 u8 adc_ctrl1, adc_ctrl1_mask;
551
552 adc_ctrl1 = STMPE_SAMPLE_TIME(stmpe->sample_time) |
553 STMPE_MOD_12B(stmpe->mod_12b) |
554 STMPE_REF_SEL(stmpe->ref_sel);
555 adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) |
556 STMPE_REF_SEL(0xff);
557
558 ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL1,
559 adc_ctrl1_mask, adc_ctrl1);
560 if (ret) {
561 dev_err(stmpe->dev, "Could not setup ADC\n");
562 return ret;
563 }
564
565 ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL2,
566 STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(stmpe->adc_freq));
567 if (ret) {
568 dev_err(stmpe->dev, "Could not setup ADC\n");
569 return ret;
570 }
571
572 return 0;
573}
574EXPORT_SYMBOL_GPL(stmpe811_adc_common_init);
575
576static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
577{
578 /* 0 for touchscreen, 1 for GPIO */
579 return block != STMPE_BLOCK_TOUCHSCREEN;
580}
581
582static struct stmpe_variant_info stmpe811 = {
583 .name = "stmpe811",
584 .id_val = 0x0811,
585 .id_mask = 0xffff,
586 .num_gpios = 8,
587 .af_bits = 1,
588 .regs = stmpe811_regs,
589 .blocks = stmpe811_blocks,
590 .num_blocks = ARRAY_SIZE(stmpe811_blocks),
591 .num_irqs = STMPE811_NR_INTERNAL_IRQS,
592 .enable = stmpe811_enable,
593 .get_altfunc = stmpe811_get_altfunc,
594};
595
596/* Similar to 811, except number of gpios */
597static struct stmpe_variant_info stmpe610 = {
598 .name = "stmpe610",
599 .id_val = 0x0811,
600 .id_mask = 0xffff,
601 .num_gpios = 6,
602 .af_bits = 1,
603 .regs = stmpe811_regs,
604 .blocks = stmpe811_blocks,
605 .num_blocks = ARRAY_SIZE(stmpe811_blocks),
606 .num_irqs = STMPE811_NR_INTERNAL_IRQS,
607 .enable = stmpe811_enable,
608 .get_altfunc = stmpe811_get_altfunc,
609};
610
611/*
612 * STMPE1600
613 * Compared to all others STMPE variant, LSB and MSB regs are located in this
614 * order : LSB addr
615 * MSB addr + 1
616 * As there is only 2 * 8bits registers for GPMR/GPSR/IEGPIOPR, CSB index is MSB registers
617 */
618
619static const u8 stmpe1600_regs[] = {
620 [STMPE_IDX_CHIP_ID] = STMPE1600_REG_CHIP_ID,
621 [STMPE_IDX_SYS_CTRL] = STMPE1600_REG_SYS_CTRL,
622 [STMPE_IDX_ICR_LSB] = STMPE1600_REG_SYS_CTRL,
623 [STMPE_IDX_GPMR_LSB] = STMPE1600_REG_GPMR_LSB,
624 [STMPE_IDX_GPMR_CSB] = STMPE1600_REG_GPMR_MSB,
625 [STMPE_IDX_GPSR_LSB] = STMPE1600_REG_GPSR_LSB,
626 [STMPE_IDX_GPSR_CSB] = STMPE1600_REG_GPSR_MSB,
627 [STMPE_IDX_GPCR_LSB] = STMPE1600_REG_GPSR_LSB,
628 [STMPE_IDX_GPCR_CSB] = STMPE1600_REG_GPSR_MSB,
629 [STMPE_IDX_GPDR_LSB] = STMPE1600_REG_GPDR_LSB,
630 [STMPE_IDX_GPDR_CSB] = STMPE1600_REG_GPDR_MSB,
631 [STMPE_IDX_IEGPIOR_LSB] = STMPE1600_REG_IEGPIOR_LSB,
632 [STMPE_IDX_IEGPIOR_CSB] = STMPE1600_REG_IEGPIOR_MSB,
633 [STMPE_IDX_ISGPIOR_LSB] = STMPE1600_REG_ISGPIOR_LSB,
634};
635
636static struct stmpe_variant_block stmpe1600_blocks[] = {
637 {
638 .cell = &stmpe_gpio_cell,
639 .irq = 0,
640 .block = STMPE_BLOCK_GPIO,
641 },
642};
643
644static int stmpe1600_enable(struct stmpe *stmpe, unsigned int blocks,
645 bool enable)
646{
647 if (blocks & STMPE_BLOCK_GPIO)
648 return 0;
649 else
650 return -EINVAL;
651}
652
653static struct stmpe_variant_info stmpe1600 = {
654 .name = "stmpe1600",
655 .id_val = STMPE1600_ID,
656 .id_mask = 0xffff,
657 .num_gpios = 16,
658 .af_bits = 0,
659 .regs = stmpe1600_regs,
660 .blocks = stmpe1600_blocks,
661 .num_blocks = ARRAY_SIZE(stmpe1600_blocks),
662 .num_irqs = STMPE1600_NR_INTERNAL_IRQS,
663 .enable = stmpe1600_enable,
664};
665
666/*
667 * STMPE1601
668 */
669
670static const u8 stmpe1601_regs[] = {
671 [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID,
672 [STMPE_IDX_SYS_CTRL] = STMPE1601_REG_SYS_CTRL,
673 [STMPE_IDX_SYS_CTRL2] = STMPE1601_REG_SYS_CTRL2,
674 [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB,
675 [STMPE_IDX_IER_MSB] = STMPE1601_REG_IER_MSB,
676 [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB,
677 [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB,
678 [STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB,
679 [STMPE_IDX_GPMR_CSB] = STMPE1601_REG_GPIO_MP_MSB,
680 [STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB,
681 [STMPE_IDX_GPSR_CSB] = STMPE1601_REG_GPIO_SET_MSB,
682 [STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB,
683 [STMPE_IDX_GPCR_CSB] = STMPE1601_REG_GPIO_CLR_MSB,
684 [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB,
685 [STMPE_IDX_GPDR_CSB] = STMPE1601_REG_GPIO_SET_DIR_MSB,
686 [STMPE_IDX_GPEDR_LSB] = STMPE1601_REG_GPIO_ED_LSB,
687 [STMPE_IDX_GPEDR_CSB] = STMPE1601_REG_GPIO_ED_MSB,
688 [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB,
689 [STMPE_IDX_GPRER_CSB] = STMPE1601_REG_GPIO_RE_MSB,
690 [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB,
691 [STMPE_IDX_GPFER_CSB] = STMPE1601_REG_GPIO_FE_MSB,
692 [STMPE_IDX_GPPUR_LSB] = STMPE1601_REG_GPIO_PU_LSB,
693 [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB,
694 [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
695 [STMPE_IDX_IEGPIOR_CSB] = STMPE1601_REG_INT_EN_GPIO_MASK_MSB,
696 [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB,
697};
698
699static struct stmpe_variant_block stmpe1601_blocks[] = {
700 {
701 .cell = &stmpe_gpio_cell,
702 .irq = STMPE1601_IRQ_GPIOC,
703 .block = STMPE_BLOCK_GPIO,
704 },
705 {
706 .cell = &stmpe_keypad_cell,
707 .irq = STMPE1601_IRQ_KEYPAD,
708 .block = STMPE_BLOCK_KEYPAD,
709 },
710 {
711 .cell = &stmpe_pwm_cell,
712 .irq = STMPE1601_IRQ_PWM0,
713 .block = STMPE_BLOCK_PWM,
714 },
715};
716
717/* supported autosleep timeout delay (in msecs) */
718static const int stmpe_autosleep_delay[] = {
719 4, 16, 32, 64, 128, 256, 512, 1024,
720};
721
722static int stmpe_round_timeout(int timeout)
723{
724 int i;
725
726 for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) {
727 if (stmpe_autosleep_delay[i] >= timeout)
728 return i;
729 }
730
731 /*
732 * requests for delays longer than supported should not return the
733 * longest supported delay
734 */
735 return -EINVAL;
736}
737
738static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout)
739{
740 int ret;
741
742 if (!stmpe->variant->enable_autosleep)
743 return -ENOSYS;
744
745 mutex_lock(&stmpe->lock);
746 ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout);
747 mutex_unlock(&stmpe->lock);
748
749 return ret;
750}
751
752/*
753 * Both stmpe 1601/2403 support same layout for autosleep
754 */
755static int stmpe1601_autosleep(struct stmpe *stmpe,
756 int autosleep_timeout)
757{
758 int ret, timeout;
759
760 /* choose the best available timeout */
761 timeout = stmpe_round_timeout(autosleep_timeout);
762 if (timeout < 0) {
763 dev_err(stmpe->dev, "invalid timeout\n");
764 return timeout;
765 }
766
767 ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
768 STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
769 timeout);
770 if (ret < 0)
771 return ret;
772
773 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
774 STPME1601_AUTOSLEEP_ENABLE,
775 STPME1601_AUTOSLEEP_ENABLE);
776}
777
778static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
779 bool enable)
780{
781 unsigned int mask = 0;
782
783 if (blocks & STMPE_BLOCK_GPIO)
784 mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
785 else
786 mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO;
787
788 if (blocks & STMPE_BLOCK_KEYPAD)
789 mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
790 else
791 mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC;
792
793 if (blocks & STMPE_BLOCK_PWM)
794 mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM;
795 else
796 mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM;
797
798 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
799 enable ? mask : 0);
800}
801
802static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
803{
804 switch (block) {
805 case STMPE_BLOCK_PWM:
806 return 2;
807
808 case STMPE_BLOCK_KEYPAD:
809 return 1;
810
811 case STMPE_BLOCK_GPIO:
812 default:
813 return 0;
814 }
815}
816
817static struct stmpe_variant_info stmpe1601 = {
818 .name = "stmpe1601",
819 .id_val = 0x0210,
820 .id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */
821 .num_gpios = 16,
822 .af_bits = 2,
823 .regs = stmpe1601_regs,
824 .blocks = stmpe1601_blocks,
825 .num_blocks = ARRAY_SIZE(stmpe1601_blocks),
826 .num_irqs = STMPE1601_NR_INTERNAL_IRQS,
827 .enable = stmpe1601_enable,
828 .get_altfunc = stmpe1601_get_altfunc,
829 .enable_autosleep = stmpe1601_autosleep,
830};
831
832/*
833 * STMPE1801
834 */
835static const u8 stmpe1801_regs[] = {
836 [STMPE_IDX_CHIP_ID] = STMPE1801_REG_CHIP_ID,
837 [STMPE_IDX_SYS_CTRL] = STMPE1801_REG_SYS_CTRL,
838 [STMPE_IDX_ICR_LSB] = STMPE1801_REG_INT_CTRL_LOW,
839 [STMPE_IDX_IER_LSB] = STMPE1801_REG_INT_EN_MASK_LOW,
840 [STMPE_IDX_ISR_LSB] = STMPE1801_REG_INT_STA_LOW,
841 [STMPE_IDX_GPMR_LSB] = STMPE1801_REG_GPIO_MP_LOW,
842 [STMPE_IDX_GPMR_CSB] = STMPE1801_REG_GPIO_MP_MID,
843 [STMPE_IDX_GPMR_MSB] = STMPE1801_REG_GPIO_MP_HIGH,
844 [STMPE_IDX_GPSR_LSB] = STMPE1801_REG_GPIO_SET_LOW,
845 [STMPE_IDX_GPSR_CSB] = STMPE1801_REG_GPIO_SET_MID,
846 [STMPE_IDX_GPSR_MSB] = STMPE1801_REG_GPIO_SET_HIGH,
847 [STMPE_IDX_GPCR_LSB] = STMPE1801_REG_GPIO_CLR_LOW,
848 [STMPE_IDX_GPCR_CSB] = STMPE1801_REG_GPIO_CLR_MID,
849 [STMPE_IDX_GPCR_MSB] = STMPE1801_REG_GPIO_CLR_HIGH,
850 [STMPE_IDX_GPDR_LSB] = STMPE1801_REG_GPIO_SET_DIR_LOW,
851 [STMPE_IDX_GPDR_CSB] = STMPE1801_REG_GPIO_SET_DIR_MID,
852 [STMPE_IDX_GPDR_MSB] = STMPE1801_REG_GPIO_SET_DIR_HIGH,
853 [STMPE_IDX_GPRER_LSB] = STMPE1801_REG_GPIO_RE_LOW,
854 [STMPE_IDX_GPRER_CSB] = STMPE1801_REG_GPIO_RE_MID,
855 [STMPE_IDX_GPRER_MSB] = STMPE1801_REG_GPIO_RE_HIGH,
856 [STMPE_IDX_GPFER_LSB] = STMPE1801_REG_GPIO_FE_LOW,
857 [STMPE_IDX_GPFER_CSB] = STMPE1801_REG_GPIO_FE_MID,
858 [STMPE_IDX_GPFER_MSB] = STMPE1801_REG_GPIO_FE_HIGH,
859 [STMPE_IDX_GPPUR_LSB] = STMPE1801_REG_GPIO_PULL_UP_LOW,
860 [STMPE_IDX_IEGPIOR_LSB] = STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
861 [STMPE_IDX_IEGPIOR_CSB] = STMPE1801_REG_INT_EN_GPIO_MASK_MID,
862 [STMPE_IDX_IEGPIOR_MSB] = STMPE1801_REG_INT_EN_GPIO_MASK_HIGH,
863 [STMPE_IDX_ISGPIOR_MSB] = STMPE1801_REG_INT_STA_GPIO_HIGH,
864};
865
866static struct stmpe_variant_block stmpe1801_blocks[] = {
867 {
868 .cell = &stmpe_gpio_cell,
869 .irq = STMPE1801_IRQ_GPIOC,
870 .block = STMPE_BLOCK_GPIO,
871 },
872 {
873 .cell = &stmpe_keypad_cell,
874 .irq = STMPE1801_IRQ_KEYPAD,
875 .block = STMPE_BLOCK_KEYPAD,
876 },
877};
878
879static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
880 bool enable)
881{
882 unsigned int mask = 0;
883 if (blocks & STMPE_BLOCK_GPIO)
884 mask |= STMPE1801_MSK_INT_EN_GPIO;
885
886 if (blocks & STMPE_BLOCK_KEYPAD)
887 mask |= STMPE1801_MSK_INT_EN_KPC;
888
889 return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask,
890 enable ? mask : 0);
891}
892
893static int stmpe_reset(struct stmpe *stmpe)
894{
895 u16 id_val = stmpe->variant->id_val;
896 unsigned long timeout;
897 int ret = 0;
898 u8 reset_bit;
899
900 if (id_val == STMPE811_ID)
901 /* STMPE801 and STMPE610 use bit 1 of SYS_CTRL register */
902 reset_bit = STMPE811_SYS_CTRL_RESET;
903 else
904 /* all other STMPE variant use bit 7 of SYS_CTRL register */
905 reset_bit = STMPE_SYS_CTRL_RESET;
906
907 ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL],
908 reset_bit, reset_bit);
909 if (ret < 0)
910 return ret;
911
912 msleep(10);
913
914 timeout = jiffies + msecs_to_jiffies(100);
915 while (time_before(jiffies, timeout)) {
916 ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]);
917 if (ret < 0)
918 return ret;
919 if (!(ret & reset_bit))
920 return 0;
921 usleep_range(100, 200);
922 }
923 return -EIO;
924}
925
926static struct stmpe_variant_info stmpe1801 = {
927 .name = "stmpe1801",
928 .id_val = STMPE1801_ID,
929 .id_mask = 0xfff0,
930 .num_gpios = 18,
931 .af_bits = 0,
932 .regs = stmpe1801_regs,
933 .blocks = stmpe1801_blocks,
934 .num_blocks = ARRAY_SIZE(stmpe1801_blocks),
935 .num_irqs = STMPE1801_NR_INTERNAL_IRQS,
936 .enable = stmpe1801_enable,
937 /* stmpe1801 do not have any gpio alternate function */
938 .get_altfunc = NULL,
939};
940
941/*
942 * STMPE24XX
943 */
944
945static const u8 stmpe24xx_regs[] = {
946 [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID,
947 [STMPE_IDX_SYS_CTRL] = STMPE24XX_REG_SYS_CTRL,
948 [STMPE_IDX_SYS_CTRL2] = STMPE24XX_REG_SYS_CTRL2,
949 [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB,
950 [STMPE_IDX_IER_MSB] = STMPE24XX_REG_IER_MSB,
951 [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB,
952 [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB,
953 [STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB,
954 [STMPE_IDX_GPMR_CSB] = STMPE24XX_REG_GPMR_CSB,
955 [STMPE_IDX_GPMR_MSB] = STMPE24XX_REG_GPMR_MSB,
956 [STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB,
957 [STMPE_IDX_GPSR_CSB] = STMPE24XX_REG_GPSR_CSB,
958 [STMPE_IDX_GPSR_MSB] = STMPE24XX_REG_GPSR_MSB,
959 [STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB,
960 [STMPE_IDX_GPCR_CSB] = STMPE24XX_REG_GPCR_CSB,
961 [STMPE_IDX_GPCR_MSB] = STMPE24XX_REG_GPCR_MSB,
962 [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB,
963 [STMPE_IDX_GPDR_CSB] = STMPE24XX_REG_GPDR_CSB,
964 [STMPE_IDX_GPDR_MSB] = STMPE24XX_REG_GPDR_MSB,
965 [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB,
966 [STMPE_IDX_GPRER_CSB] = STMPE24XX_REG_GPRER_CSB,
967 [STMPE_IDX_GPRER_MSB] = STMPE24XX_REG_GPRER_MSB,
968 [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB,
969 [STMPE_IDX_GPFER_CSB] = STMPE24XX_REG_GPFER_CSB,
970 [STMPE_IDX_GPFER_MSB] = STMPE24XX_REG_GPFER_MSB,
971 [STMPE_IDX_GPPUR_LSB] = STMPE24XX_REG_GPPUR_LSB,
972 [STMPE_IDX_GPPDR_LSB] = STMPE24XX_REG_GPPDR_LSB,
973 [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB,
974 [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB,
975 [STMPE_IDX_IEGPIOR_CSB] = STMPE24XX_REG_IEGPIOR_CSB,
976 [STMPE_IDX_IEGPIOR_MSB] = STMPE24XX_REG_IEGPIOR_MSB,
977 [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB,
978 [STMPE_IDX_GPEDR_LSB] = STMPE24XX_REG_GPEDR_LSB,
979 [STMPE_IDX_GPEDR_CSB] = STMPE24XX_REG_GPEDR_CSB,
980 [STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB,
981};
982
983static struct stmpe_variant_block stmpe24xx_blocks[] = {
984 {
985 .cell = &stmpe_gpio_cell,
986 .irq = STMPE24XX_IRQ_GPIOC,
987 .block = STMPE_BLOCK_GPIO,
988 },
989 {
990 .cell = &stmpe_keypad_cell,
991 .irq = STMPE24XX_IRQ_KEYPAD,
992 .block = STMPE_BLOCK_KEYPAD,
993 },
994 {
995 .cell = &stmpe_pwm_cell,
996 .irq = STMPE24XX_IRQ_PWM0,
997 .block = STMPE_BLOCK_PWM,
998 },
999};
1000
1001static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
1002 bool enable)
1003{
1004 unsigned int mask = 0;
1005
1006 if (blocks & STMPE_BLOCK_GPIO)
1007 mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO;
1008
1009 if (blocks & STMPE_BLOCK_KEYPAD)
1010 mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
1011
1012 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
1013 enable ? mask : 0);
1014}
1015
1016static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
1017{
1018 switch (block) {
1019 case STMPE_BLOCK_ROTATOR:
1020 return 2;
1021
1022 case STMPE_BLOCK_KEYPAD:
1023 case STMPE_BLOCK_PWM:
1024 return 1;
1025
1026 case STMPE_BLOCK_GPIO:
1027 default:
1028 return 0;
1029 }
1030}
1031
1032static struct stmpe_variant_info stmpe2401 = {
1033 .name = "stmpe2401",
1034 .id_val = 0x0101,
1035 .id_mask = 0xffff,
1036 .num_gpios = 24,
1037 .af_bits = 2,
1038 .regs = stmpe24xx_regs,
1039 .blocks = stmpe24xx_blocks,
1040 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
1041 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
1042 .enable = stmpe24xx_enable,
1043 .get_altfunc = stmpe24xx_get_altfunc,
1044};
1045
1046static struct stmpe_variant_info stmpe2403 = {
1047 .name = "stmpe2403",
1048 .id_val = 0x0120,
1049 .id_mask = 0xffff,
1050 .num_gpios = 24,
1051 .af_bits = 2,
1052 .regs = stmpe24xx_regs,
1053 .blocks = stmpe24xx_blocks,
1054 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
1055 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
1056 .enable = stmpe24xx_enable,
1057 .get_altfunc = stmpe24xx_get_altfunc,
1058 .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */
1059};
1060
1061static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
1062 [STMPE610] = &stmpe610,
1063 [STMPE801] = &stmpe801,
1064 [STMPE811] = &stmpe811,
1065 [STMPE1600] = &stmpe1600,
1066 [STMPE1601] = &stmpe1601,
1067 [STMPE1801] = &stmpe1801,
1068 [STMPE2401] = &stmpe2401,
1069 [STMPE2403] = &stmpe2403,
1070};
1071
1072/*
1073 * These devices can be connected in a 'no-irq' configuration - the irq pin
1074 * is not used and the device cannot interrupt the CPU. Here we only list
1075 * devices which support this configuration - the driver will fail probing
1076 * for any devices not listed here which are configured in this way.
1077 */
1078static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = {
1079 [STMPE801] = &stmpe801_noirq,
1080};
1081
1082static irqreturn_t stmpe_irq(int irq, void *data)
1083{
1084 struct stmpe *stmpe = data;
1085 struct stmpe_variant_info *variant = stmpe->variant;
1086 int num = DIV_ROUND_UP(variant->num_irqs, 8);
1087 u8 israddr;
1088 u8 isr[3];
1089 int ret;
1090 int i;
1091
1092 if (variant->id_val == STMPE801_ID ||
1093 variant->id_val == STMPE1600_ID) {
1094 int base = irq_create_mapping(stmpe->domain, 0);
1095
1096 handle_nested_irq(base);
1097 return IRQ_HANDLED;
1098 }
1099
1100 if (variant->id_val == STMPE1801_ID)
1101 israddr = stmpe->regs[STMPE_IDX_ISR_LSB];
1102 else
1103 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
1104
1105 ret = stmpe_block_read(stmpe, israddr, num, isr);
1106 if (ret < 0)
1107 return IRQ_NONE;
1108
1109 for (i = 0; i < num; i++) {
1110 int bank = num - i - 1;
1111 u8 status = isr[i];
1112 u8 clear;
1113
1114 status &= stmpe->ier[bank];
1115 if (!status)
1116 continue;
1117
1118 clear = status;
1119 while (status) {
1120 int bit = __ffs(status);
1121 int line = bank * 8 + bit;
1122 int nestedirq = irq_create_mapping(stmpe->domain, line);
1123
1124 handle_nested_irq(nestedirq);
1125 status &= ~(1 << bit);
1126 }
1127
1128 stmpe_reg_write(stmpe, israddr + i, clear);
1129 }
1130
1131 return IRQ_HANDLED;
1132}
1133
1134static void stmpe_irq_lock(struct irq_data *data)
1135{
1136 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1137
1138 mutex_lock(&stmpe->irq_lock);
1139}
1140
1141static void stmpe_irq_sync_unlock(struct irq_data *data)
1142{
1143 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1144 struct stmpe_variant_info *variant = stmpe->variant;
1145 int num = DIV_ROUND_UP(variant->num_irqs, 8);
1146 int i;
1147
1148 for (i = 0; i < num; i++) {
1149 u8 new = stmpe->ier[i];
1150 u8 old = stmpe->oldier[i];
1151
1152 if (new == old)
1153 continue;
1154
1155 stmpe->oldier[i] = new;
1156 stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB + i], new);
1157 }
1158
1159 mutex_unlock(&stmpe->irq_lock);
1160}
1161
1162static void stmpe_irq_mask(struct irq_data *data)
1163{
1164 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1165 int offset = data->hwirq;
1166 int regoffset = offset / 8;
1167 int mask = 1 << (offset % 8);
1168
1169 stmpe->ier[regoffset] &= ~mask;
1170}
1171
1172static void stmpe_irq_unmask(struct irq_data *data)
1173{
1174 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1175 int offset = data->hwirq;
1176 int regoffset = offset / 8;
1177 int mask = 1 << (offset % 8);
1178
1179 stmpe->ier[regoffset] |= mask;
1180}
1181
1182static struct irq_chip stmpe_irq_chip = {
1183 .name = "stmpe",
1184 .irq_bus_lock = stmpe_irq_lock,
1185 .irq_bus_sync_unlock = stmpe_irq_sync_unlock,
1186 .irq_mask = stmpe_irq_mask,
1187 .irq_unmask = stmpe_irq_unmask,
1188};
1189
1190static int stmpe_irq_map(struct irq_domain *d, unsigned int virq,
1191 irq_hw_number_t hwirq)
1192{
1193 struct stmpe *stmpe = d->host_data;
1194 struct irq_chip *chip = NULL;
1195
1196 if (stmpe->variant->id_val != STMPE801_ID)
1197 chip = &stmpe_irq_chip;
1198
1199 irq_set_chip_data(virq, stmpe);
1200 irq_set_chip_and_handler(virq, chip, handle_edge_irq);
1201 irq_set_nested_thread(virq, 1);
1202 irq_set_noprobe(virq);
1203
1204 return 0;
1205}
1206
1207static void stmpe_irq_unmap(struct irq_domain *d, unsigned int virq)
1208{
1209 irq_set_chip_and_handler(virq, NULL, NULL);
1210 irq_set_chip_data(virq, NULL);
1211}
1212
1213static const struct irq_domain_ops stmpe_irq_ops = {
1214 .map = stmpe_irq_map,
1215 .unmap = stmpe_irq_unmap,
1216 .xlate = irq_domain_xlate_twocell,
1217};
1218
1219static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np)
1220{
1221 int base = 0;
1222 int num_irqs = stmpe->variant->num_irqs;
1223
1224 stmpe->domain = irq_domain_add_simple(np, num_irqs, base,
1225 &stmpe_irq_ops, stmpe);
1226 if (!stmpe->domain) {
1227 dev_err(stmpe->dev, "Failed to create irqdomain\n");
1228 return -ENOSYS;
1229 }
1230
1231 return 0;
1232}
1233
1234static int stmpe_chip_init(struct stmpe *stmpe)
1235{
1236 unsigned int irq_trigger = stmpe->pdata->irq_trigger;
1237 int autosleep_timeout = stmpe->pdata->autosleep_timeout;
1238 struct stmpe_variant_info *variant = stmpe->variant;
1239 u8 icr = 0;
1240 unsigned int id;
1241 u8 data[2];
1242 int ret;
1243
1244 ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID],
1245 ARRAY_SIZE(data), data);
1246 if (ret < 0)
1247 return ret;
1248
1249 id = (data[0] << 8) | data[1];
1250 if ((id & variant->id_mask) != variant->id_val) {
1251 dev_err(stmpe->dev, "unknown chip id: %#x\n", id);
1252 return -EINVAL;
1253 }
1254
1255 dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id);
1256
1257 /* Disable all modules -- subdrivers should enable what they need. */
1258 ret = stmpe_disable(stmpe, ~0);
1259 if (ret)
1260 return ret;
1261
1262 ret = stmpe_reset(stmpe);
1263 if (ret < 0)
1264 return ret;
1265
1266 if (stmpe->irq >= 0) {
1267 if (id == STMPE801_ID || id == STMPE1600_ID)
1268 icr = STMPE_SYS_CTRL_INT_EN;
1269 else
1270 icr = STMPE_ICR_LSB_GIM;
1271
1272 /* STMPE801 and STMPE1600 don't support Edge interrupts */
1273 if (id != STMPE801_ID && id != STMPE1600_ID) {
1274 if (irq_trigger == IRQF_TRIGGER_FALLING ||
1275 irq_trigger == IRQF_TRIGGER_RISING)
1276 icr |= STMPE_ICR_LSB_EDGE;
1277 }
1278
1279 if (irq_trigger == IRQF_TRIGGER_RISING ||
1280 irq_trigger == IRQF_TRIGGER_HIGH) {
1281 if (id == STMPE801_ID || id == STMPE1600_ID)
1282 icr |= STMPE_SYS_CTRL_INT_HI;
1283 else
1284 icr |= STMPE_ICR_LSB_HIGH;
1285 }
1286 }
1287
1288 if (stmpe->pdata->autosleep) {
1289 ret = stmpe_autosleep(stmpe, autosleep_timeout);
1290 if (ret)
1291 return ret;
1292 }
1293
1294 return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
1295}
1296
1297static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell)
1298{
1299 return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
1300 NULL, 0, stmpe->domain);
1301}
1302
1303static int stmpe_devices_init(struct stmpe *stmpe)
1304{
1305 struct stmpe_variant_info *variant = stmpe->variant;
1306 unsigned int platform_blocks = stmpe->pdata->blocks;
1307 int ret = -EINVAL;
1308 int i, j;
1309
1310 for (i = 0; i < variant->num_blocks; i++) {
1311 struct stmpe_variant_block *block = &variant->blocks[i];
1312
1313 if (!(platform_blocks & block->block))
1314 continue;
1315
1316 for (j = 0; j < block->cell->num_resources; j++) {
1317 struct resource *res =
1318 (struct resource *) &block->cell->resources[j];
1319
1320 /* Dynamically fill in a variant's IRQ. */
1321 if (res->flags & IORESOURCE_IRQ)
1322 res->start = res->end = block->irq + j;
1323 }
1324
1325 platform_blocks &= ~block->block;
1326 ret = stmpe_add_device(stmpe, block->cell);
1327 if (ret)
1328 return ret;
1329 }
1330
1331 if (platform_blocks)
1332 dev_warn(stmpe->dev,
1333 "platform wants blocks (%#x) not present on variant",
1334 platform_blocks);
1335
1336 return ret;
1337}
1338
1339static void stmpe_of_probe(struct stmpe_platform_data *pdata,
1340 struct device_node *np)
1341{
1342 struct device_node *child;
1343
1344 pdata->id = of_alias_get_id(np, "stmpe-i2c");
1345 if (pdata->id < 0)
1346 pdata->id = -1;
1347
1348 pdata->irq_gpio = of_get_named_gpio_flags(np, "irq-gpio", 0,
1349 &pdata->irq_trigger);
1350 if (gpio_is_valid(pdata->irq_gpio))
1351 pdata->irq_over_gpio = 1;
1352 else
1353 pdata->irq_trigger = IRQF_TRIGGER_NONE;
1354
1355 of_property_read_u32(np, "st,autosleep-timeout",
1356 &pdata->autosleep_timeout);
1357
1358 pdata->autosleep = (pdata->autosleep_timeout) ? true : false;
1359
1360 for_each_child_of_node(np, child) {
1361 if (of_node_name_eq(child, "stmpe_gpio")) {
1362 pdata->blocks |= STMPE_BLOCK_GPIO;
1363 } else if (of_node_name_eq(child, "stmpe_keypad")) {
1364 pdata->blocks |= STMPE_BLOCK_KEYPAD;
1365 } else if (of_node_name_eq(child, "stmpe_touchscreen")) {
1366 pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN;
1367 } else if (of_node_name_eq(child, "stmpe_adc")) {
1368 pdata->blocks |= STMPE_BLOCK_ADC;
1369 } else if (of_node_name_eq(child, "stmpe_pwm")) {
1370 pdata->blocks |= STMPE_BLOCK_PWM;
1371 } else if (of_node_name_eq(child, "stmpe_rotator")) {
1372 pdata->blocks |= STMPE_BLOCK_ROTATOR;
1373 }
1374 }
1375}
1376
1377/* Called from client specific probe routines */
1378int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
1379{
1380 struct stmpe_platform_data *pdata;
1381 struct device_node *np = ci->dev->of_node;
1382 struct stmpe *stmpe;
1383 int ret;
1384 u32 val;
1385
1386 pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
1387 if (!pdata)
1388 return -ENOMEM;
1389
1390 stmpe_of_probe(pdata, np);
1391
1392 if (of_find_property(np, "interrupts", NULL) == NULL)
1393 ci->irq = -1;
1394
1395 stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
1396 if (!stmpe)
1397 return -ENOMEM;
1398
1399 mutex_init(&stmpe->irq_lock);
1400 mutex_init(&stmpe->lock);
1401
1402 if (!of_property_read_u32(np, "st,sample-time", &val))
1403 stmpe->sample_time = val;
1404 if (!of_property_read_u32(np, "st,mod-12b", &val))
1405 stmpe->mod_12b = val;
1406 if (!of_property_read_u32(np, "st,ref-sel", &val))
1407 stmpe->ref_sel = val;
1408 if (!of_property_read_u32(np, "st,adc-freq", &val))
1409 stmpe->adc_freq = val;
1410
1411 stmpe->dev = ci->dev;
1412 stmpe->client = ci->client;
1413 stmpe->pdata = pdata;
1414 stmpe->ci = ci;
1415 stmpe->partnum = partnum;
1416 stmpe->variant = stmpe_variant_info[partnum];
1417 stmpe->regs = stmpe->variant->regs;
1418 stmpe->num_gpios = stmpe->variant->num_gpios;
1419 stmpe->vcc = devm_regulator_get_optional(ci->dev, "vcc");
1420 if (!IS_ERR(stmpe->vcc)) {
1421 ret = regulator_enable(stmpe->vcc);
1422 if (ret)
1423 dev_warn(ci->dev, "failed to enable VCC supply\n");
1424 }
1425 stmpe->vio = devm_regulator_get_optional(ci->dev, "vio");
1426 if (!IS_ERR(stmpe->vio)) {
1427 ret = regulator_enable(stmpe->vio);
1428 if (ret)
1429 dev_warn(ci->dev, "failed to enable VIO supply\n");
1430 }
1431 dev_set_drvdata(stmpe->dev, stmpe);
1432
1433 if (ci->init)
1434 ci->init(stmpe);
1435
1436 if (pdata->irq_over_gpio) {
1437 ret = devm_gpio_request_one(ci->dev, pdata->irq_gpio,
1438 GPIOF_DIR_IN, "stmpe");
1439 if (ret) {
1440 dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n",
1441 ret);
1442 return ret;
1443 }
1444
1445 stmpe->irq = gpio_to_irq(pdata->irq_gpio);
1446 } else {
1447 stmpe->irq = ci->irq;
1448 }
1449
1450 if (stmpe->irq < 0) {
1451 /* use alternate variant info for no-irq mode, if supported */
1452 dev_info(stmpe->dev,
1453 "%s configured in no-irq mode by platform data\n",
1454 stmpe->variant->name);
1455 if (!stmpe_noirq_variant_info[stmpe->partnum]) {
1456 dev_err(stmpe->dev,
1457 "%s does not support no-irq mode!\n",
1458 stmpe->variant->name);
1459 return -ENODEV;
1460 }
1461 stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum];
1462 } else if (pdata->irq_trigger == IRQF_TRIGGER_NONE) {
1463 pdata->irq_trigger = irq_get_trigger_type(stmpe->irq);
1464 }
1465
1466 ret = stmpe_chip_init(stmpe);
1467 if (ret)
1468 return ret;
1469
1470 if (stmpe->irq >= 0) {
1471 ret = stmpe_irq_init(stmpe, np);
1472 if (ret)
1473 return ret;
1474
1475 ret = devm_request_threaded_irq(ci->dev, stmpe->irq, NULL,
1476 stmpe_irq, pdata->irq_trigger | IRQF_ONESHOT,
1477 "stmpe", stmpe);
1478 if (ret) {
1479 dev_err(stmpe->dev, "failed to request IRQ: %d\n",
1480 ret);
1481 return ret;
1482 }
1483 }
1484
1485 ret = stmpe_devices_init(stmpe);
1486 if (!ret)
1487 return 0;
1488
1489 dev_err(stmpe->dev, "failed to add children\n");
1490 mfd_remove_devices(stmpe->dev);
1491
1492 return ret;
1493}
1494
1495int stmpe_remove(struct stmpe *stmpe)
1496{
1497 if (!IS_ERR(stmpe->vio))
1498 regulator_disable(stmpe->vio);
1499 if (!IS_ERR(stmpe->vcc))
1500 regulator_disable(stmpe->vcc);
1501
1502 __stmpe_disable(stmpe, STMPE_BLOCK_ADC);
1503
1504 mfd_remove_devices(stmpe->dev);
1505
1506 return 0;
1507}
1508
1509#ifdef CONFIG_PM
1510static int stmpe_suspend(struct device *dev)
1511{
1512 struct stmpe *stmpe = dev_get_drvdata(dev);
1513
1514 if (stmpe->irq >= 0 && device_may_wakeup(dev))
1515 enable_irq_wake(stmpe->irq);
1516
1517 return 0;
1518}
1519
1520static int stmpe_resume(struct device *dev)
1521{
1522 struct stmpe *stmpe = dev_get_drvdata(dev);
1523
1524 if (stmpe->irq >= 0 && device_may_wakeup(dev))
1525 disable_irq_wake(stmpe->irq);
1526
1527 return 0;
1528}
1529
1530const struct dev_pm_ops stmpe_dev_pm_ops = {
1531 .suspend = stmpe_suspend,
1532 .resume = stmpe_resume,
1533};
1534#endif
1/*
2 * ST Microelectronics MFD: stmpe's driver
3 *
4 * Copyright (C) ST-Ericsson SA 2010
5 *
6 * License Terms: GNU General Public License, version 2
7 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
8 */
9
10#include <linux/err.h>
11#include <linux/gpio.h>
12#include <linux/export.h>
13#include <linux/kernel.h>
14#include <linux/interrupt.h>
15#include <linux/irq.h>
16#include <linux/irqdomain.h>
17#include <linux/of.h>
18#include <linux/of_gpio.h>
19#include <linux/pm.h>
20#include <linux/slab.h>
21#include <linux/mfd/core.h>
22#include <linux/delay.h>
23#include "stmpe.h"
24
25static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
26{
27 return stmpe->variant->enable(stmpe, blocks, true);
28}
29
30static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
31{
32 return stmpe->variant->enable(stmpe, blocks, false);
33}
34
35static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg)
36{
37 int ret;
38
39 ret = stmpe->ci->read_byte(stmpe, reg);
40 if (ret < 0)
41 dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret);
42
43 dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
44
45 return ret;
46}
47
48static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
49{
50 int ret;
51
52 dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
53
54 ret = stmpe->ci->write_byte(stmpe, reg, val);
55 if (ret < 0)
56 dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret);
57
58 return ret;
59}
60
61static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
62{
63 int ret;
64
65 ret = __stmpe_reg_read(stmpe, reg);
66 if (ret < 0)
67 return ret;
68
69 ret &= ~mask;
70 ret |= val;
71
72 return __stmpe_reg_write(stmpe, reg, ret);
73}
74
75static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
76 u8 *values)
77{
78 int ret;
79
80 ret = stmpe->ci->read_block(stmpe, reg, length, values);
81 if (ret < 0)
82 dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret);
83
84 dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
85 stmpe_dump_bytes("stmpe rd: ", values, length);
86
87 return ret;
88}
89
90static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
91 const u8 *values)
92{
93 int ret;
94
95 dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
96 stmpe_dump_bytes("stmpe wr: ", values, length);
97
98 ret = stmpe->ci->write_block(stmpe, reg, length, values);
99 if (ret < 0)
100 dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret);
101
102 return ret;
103}
104
105/**
106 * stmpe_enable - enable blocks on an STMPE device
107 * @stmpe: Device to work on
108 * @blocks: Mask of blocks (enum stmpe_block values) to enable
109 */
110int stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
111{
112 int ret;
113
114 mutex_lock(&stmpe->lock);
115 ret = __stmpe_enable(stmpe, blocks);
116 mutex_unlock(&stmpe->lock);
117
118 return ret;
119}
120EXPORT_SYMBOL_GPL(stmpe_enable);
121
122/**
123 * stmpe_disable - disable blocks on an STMPE device
124 * @stmpe: Device to work on
125 * @blocks: Mask of blocks (enum stmpe_block values) to enable
126 */
127int stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
128{
129 int ret;
130
131 mutex_lock(&stmpe->lock);
132 ret = __stmpe_disable(stmpe, blocks);
133 mutex_unlock(&stmpe->lock);
134
135 return ret;
136}
137EXPORT_SYMBOL_GPL(stmpe_disable);
138
139/**
140 * stmpe_reg_read() - read a single STMPE register
141 * @stmpe: Device to read from
142 * @reg: Register to read
143 */
144int stmpe_reg_read(struct stmpe *stmpe, u8 reg)
145{
146 int ret;
147
148 mutex_lock(&stmpe->lock);
149 ret = __stmpe_reg_read(stmpe, reg);
150 mutex_unlock(&stmpe->lock);
151
152 return ret;
153}
154EXPORT_SYMBOL_GPL(stmpe_reg_read);
155
156/**
157 * stmpe_reg_write() - write a single STMPE register
158 * @stmpe: Device to write to
159 * @reg: Register to write
160 * @val: Value to write
161 */
162int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
163{
164 int ret;
165
166 mutex_lock(&stmpe->lock);
167 ret = __stmpe_reg_write(stmpe, reg, val);
168 mutex_unlock(&stmpe->lock);
169
170 return ret;
171}
172EXPORT_SYMBOL_GPL(stmpe_reg_write);
173
174/**
175 * stmpe_set_bits() - set the value of a bitfield in a STMPE register
176 * @stmpe: Device to write to
177 * @reg: Register to write
178 * @mask: Mask of bits to set
179 * @val: Value to set
180 */
181int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
182{
183 int ret;
184
185 mutex_lock(&stmpe->lock);
186 ret = __stmpe_set_bits(stmpe, reg, mask, val);
187 mutex_unlock(&stmpe->lock);
188
189 return ret;
190}
191EXPORT_SYMBOL_GPL(stmpe_set_bits);
192
193/**
194 * stmpe_block_read() - read multiple STMPE registers
195 * @stmpe: Device to read from
196 * @reg: First register
197 * @length: Number of registers
198 * @values: Buffer to write to
199 */
200int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
201{
202 int ret;
203
204 mutex_lock(&stmpe->lock);
205 ret = __stmpe_block_read(stmpe, reg, length, values);
206 mutex_unlock(&stmpe->lock);
207
208 return ret;
209}
210EXPORT_SYMBOL_GPL(stmpe_block_read);
211
212/**
213 * stmpe_block_write() - write multiple STMPE registers
214 * @stmpe: Device to write to
215 * @reg: First register
216 * @length: Number of registers
217 * @values: Values to write
218 */
219int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
220 const u8 *values)
221{
222 int ret;
223
224 mutex_lock(&stmpe->lock);
225 ret = __stmpe_block_write(stmpe, reg, length, values);
226 mutex_unlock(&stmpe->lock);
227
228 return ret;
229}
230EXPORT_SYMBOL_GPL(stmpe_block_write);
231
232/**
233 * stmpe_set_altfunc()- set the alternate function for STMPE pins
234 * @stmpe: Device to configure
235 * @pins: Bitmask of pins to affect
236 * @block: block to enable alternate functions for
237 *
238 * @pins is assumed to have a bit set for each of the bits whose alternate
239 * function is to be changed, numbered according to the GPIOXY numbers.
240 *
241 * If the GPIO module is not enabled, this function automatically enables it in
242 * order to perform the change.
243 */
244int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block)
245{
246 struct stmpe_variant_info *variant = stmpe->variant;
247 u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB];
248 int af_bits = variant->af_bits;
249 int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8);
250 int mask = (1 << af_bits) - 1;
251 u8 regs[numregs];
252 int af, afperreg, ret;
253
254 if (!variant->get_altfunc)
255 return 0;
256
257 afperreg = 8 / af_bits;
258 mutex_lock(&stmpe->lock);
259
260 ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
261 if (ret < 0)
262 goto out;
263
264 ret = __stmpe_block_read(stmpe, regaddr, numregs, regs);
265 if (ret < 0)
266 goto out;
267
268 af = variant->get_altfunc(stmpe, block);
269
270 while (pins) {
271 int pin = __ffs(pins);
272 int regoffset = numregs - (pin / afperreg) - 1;
273 int pos = (pin % afperreg) * (8 / afperreg);
274
275 regs[regoffset] &= ~(mask << pos);
276 regs[regoffset] |= af << pos;
277
278 pins &= ~(1 << pin);
279 }
280
281 ret = __stmpe_block_write(stmpe, regaddr, numregs, regs);
282
283out:
284 mutex_unlock(&stmpe->lock);
285 return ret;
286}
287EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
288
289/*
290 * GPIO (all variants)
291 */
292
293static struct resource stmpe_gpio_resources[] = {
294 /* Start and end filled dynamically */
295 {
296 .flags = IORESOURCE_IRQ,
297 },
298};
299
300static const struct mfd_cell stmpe_gpio_cell = {
301 .name = "stmpe-gpio",
302 .of_compatible = "st,stmpe-gpio",
303 .resources = stmpe_gpio_resources,
304 .num_resources = ARRAY_SIZE(stmpe_gpio_resources),
305};
306
307static const struct mfd_cell stmpe_gpio_cell_noirq = {
308 .name = "stmpe-gpio",
309 .of_compatible = "st,stmpe-gpio",
310 /* gpio cell resources consist of an irq only so no resources here */
311};
312
313/*
314 * Keypad (1601, 2401, 2403)
315 */
316
317static struct resource stmpe_keypad_resources[] = {
318 {
319 .name = "KEYPAD",
320 .flags = IORESOURCE_IRQ,
321 },
322 {
323 .name = "KEYPAD_OVER",
324 .flags = IORESOURCE_IRQ,
325 },
326};
327
328static const struct mfd_cell stmpe_keypad_cell = {
329 .name = "stmpe-keypad",
330 .of_compatible = "st,stmpe-keypad",
331 .resources = stmpe_keypad_resources,
332 .num_resources = ARRAY_SIZE(stmpe_keypad_resources),
333};
334
335/*
336 * STMPE801
337 */
338static const u8 stmpe801_regs[] = {
339 [STMPE_IDX_CHIP_ID] = STMPE801_REG_CHIP_ID,
340 [STMPE_IDX_ICR_LSB] = STMPE801_REG_SYS_CTRL,
341 [STMPE_IDX_GPMR_LSB] = STMPE801_REG_GPIO_MP_STA,
342 [STMPE_IDX_GPSR_LSB] = STMPE801_REG_GPIO_SET_PIN,
343 [STMPE_IDX_GPCR_LSB] = STMPE801_REG_GPIO_SET_PIN,
344 [STMPE_IDX_GPDR_LSB] = STMPE801_REG_GPIO_DIR,
345 [STMPE_IDX_IEGPIOR_LSB] = STMPE801_REG_GPIO_INT_EN,
346 [STMPE_IDX_ISGPIOR_MSB] = STMPE801_REG_GPIO_INT_STA,
347
348};
349
350static struct stmpe_variant_block stmpe801_blocks[] = {
351 {
352 .cell = &stmpe_gpio_cell,
353 .irq = 0,
354 .block = STMPE_BLOCK_GPIO,
355 },
356};
357
358static struct stmpe_variant_block stmpe801_blocks_noirq[] = {
359 {
360 .cell = &stmpe_gpio_cell_noirq,
361 .block = STMPE_BLOCK_GPIO,
362 },
363};
364
365static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks,
366 bool enable)
367{
368 if (blocks & STMPE_BLOCK_GPIO)
369 return 0;
370 else
371 return -EINVAL;
372}
373
374static struct stmpe_variant_info stmpe801 = {
375 .name = "stmpe801",
376 .id_val = STMPE801_ID,
377 .id_mask = 0xffff,
378 .num_gpios = 8,
379 .regs = stmpe801_regs,
380 .blocks = stmpe801_blocks,
381 .num_blocks = ARRAY_SIZE(stmpe801_blocks),
382 .num_irqs = STMPE801_NR_INTERNAL_IRQS,
383 .enable = stmpe801_enable,
384};
385
386static struct stmpe_variant_info stmpe801_noirq = {
387 .name = "stmpe801",
388 .id_val = STMPE801_ID,
389 .id_mask = 0xffff,
390 .num_gpios = 8,
391 .regs = stmpe801_regs,
392 .blocks = stmpe801_blocks_noirq,
393 .num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq),
394 .enable = stmpe801_enable,
395};
396
397/*
398 * Touchscreen (STMPE811 or STMPE610)
399 */
400
401static struct resource stmpe_ts_resources[] = {
402 {
403 .name = "TOUCH_DET",
404 .flags = IORESOURCE_IRQ,
405 },
406 {
407 .name = "FIFO_TH",
408 .flags = IORESOURCE_IRQ,
409 },
410};
411
412static const struct mfd_cell stmpe_ts_cell = {
413 .name = "stmpe-ts",
414 .of_compatible = "st,stmpe-ts",
415 .resources = stmpe_ts_resources,
416 .num_resources = ARRAY_SIZE(stmpe_ts_resources),
417};
418
419/*
420 * STMPE811 or STMPE610
421 */
422
423static const u8 stmpe811_regs[] = {
424 [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID,
425 [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL,
426 [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN,
427 [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA,
428 [STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA,
429 [STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN,
430 [STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN,
431 [STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR,
432 [STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE,
433 [STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE,
434 [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF,
435 [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN,
436 [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA,
437 [STMPE_IDX_GPEDR_MSB] = STMPE811_REG_GPIO_ED,
438};
439
440static struct stmpe_variant_block stmpe811_blocks[] = {
441 {
442 .cell = &stmpe_gpio_cell,
443 .irq = STMPE811_IRQ_GPIOC,
444 .block = STMPE_BLOCK_GPIO,
445 },
446 {
447 .cell = &stmpe_ts_cell,
448 .irq = STMPE811_IRQ_TOUCH_DET,
449 .block = STMPE_BLOCK_TOUCHSCREEN,
450 },
451};
452
453static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
454 bool enable)
455{
456 unsigned int mask = 0;
457
458 if (blocks & STMPE_BLOCK_GPIO)
459 mask |= STMPE811_SYS_CTRL2_GPIO_OFF;
460
461 if (blocks & STMPE_BLOCK_ADC)
462 mask |= STMPE811_SYS_CTRL2_ADC_OFF;
463
464 if (blocks & STMPE_BLOCK_TOUCHSCREEN)
465 mask |= STMPE811_SYS_CTRL2_TSC_OFF;
466
467 return __stmpe_set_bits(stmpe, STMPE811_REG_SYS_CTRL2, mask,
468 enable ? 0 : mask);
469}
470
471static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
472{
473 /* 0 for touchscreen, 1 for GPIO */
474 return block != STMPE_BLOCK_TOUCHSCREEN;
475}
476
477static struct stmpe_variant_info stmpe811 = {
478 .name = "stmpe811",
479 .id_val = 0x0811,
480 .id_mask = 0xffff,
481 .num_gpios = 8,
482 .af_bits = 1,
483 .regs = stmpe811_regs,
484 .blocks = stmpe811_blocks,
485 .num_blocks = ARRAY_SIZE(stmpe811_blocks),
486 .num_irqs = STMPE811_NR_INTERNAL_IRQS,
487 .enable = stmpe811_enable,
488 .get_altfunc = stmpe811_get_altfunc,
489};
490
491/* Similar to 811, except number of gpios */
492static struct stmpe_variant_info stmpe610 = {
493 .name = "stmpe610",
494 .id_val = 0x0811,
495 .id_mask = 0xffff,
496 .num_gpios = 6,
497 .af_bits = 1,
498 .regs = stmpe811_regs,
499 .blocks = stmpe811_blocks,
500 .num_blocks = ARRAY_SIZE(stmpe811_blocks),
501 .num_irqs = STMPE811_NR_INTERNAL_IRQS,
502 .enable = stmpe811_enable,
503 .get_altfunc = stmpe811_get_altfunc,
504};
505
506/*
507 * STMPE1601
508 */
509
510static const u8 stmpe1601_regs[] = {
511 [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID,
512 [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB,
513 [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB,
514 [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB,
515 [STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB,
516 [STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB,
517 [STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB,
518 [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB,
519 [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB,
520 [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB,
521 [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB,
522 [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
523 [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB,
524 [STMPE_IDX_GPEDR_MSB] = STMPE1601_REG_GPIO_ED_MSB,
525};
526
527static struct stmpe_variant_block stmpe1601_blocks[] = {
528 {
529 .cell = &stmpe_gpio_cell,
530 .irq = STMPE1601_IRQ_GPIOC,
531 .block = STMPE_BLOCK_GPIO,
532 },
533 {
534 .cell = &stmpe_keypad_cell,
535 .irq = STMPE1601_IRQ_KEYPAD,
536 .block = STMPE_BLOCK_KEYPAD,
537 },
538};
539
540/* supported autosleep timeout delay (in msecs) */
541static const int stmpe_autosleep_delay[] = {
542 4, 16, 32, 64, 128, 256, 512, 1024,
543};
544
545static int stmpe_round_timeout(int timeout)
546{
547 int i;
548
549 for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) {
550 if (stmpe_autosleep_delay[i] >= timeout)
551 return i;
552 }
553
554 /*
555 * requests for delays longer than supported should not return the
556 * longest supported delay
557 */
558 return -EINVAL;
559}
560
561static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout)
562{
563 int ret;
564
565 if (!stmpe->variant->enable_autosleep)
566 return -ENOSYS;
567
568 mutex_lock(&stmpe->lock);
569 ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout);
570 mutex_unlock(&stmpe->lock);
571
572 return ret;
573}
574
575/*
576 * Both stmpe 1601/2403 support same layout for autosleep
577 */
578static int stmpe1601_autosleep(struct stmpe *stmpe,
579 int autosleep_timeout)
580{
581 int ret, timeout;
582
583 /* choose the best available timeout */
584 timeout = stmpe_round_timeout(autosleep_timeout);
585 if (timeout < 0) {
586 dev_err(stmpe->dev, "invalid timeout\n");
587 return timeout;
588 }
589
590 ret = __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
591 STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
592 timeout);
593 if (ret < 0)
594 return ret;
595
596 return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
597 STPME1601_AUTOSLEEP_ENABLE,
598 STPME1601_AUTOSLEEP_ENABLE);
599}
600
601static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
602 bool enable)
603{
604 unsigned int mask = 0;
605
606 if (blocks & STMPE_BLOCK_GPIO)
607 mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
608
609 if (blocks & STMPE_BLOCK_KEYPAD)
610 mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
611
612 return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask,
613 enable ? mask : 0);
614}
615
616static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
617{
618 switch (block) {
619 case STMPE_BLOCK_PWM:
620 return 2;
621
622 case STMPE_BLOCK_KEYPAD:
623 return 1;
624
625 case STMPE_BLOCK_GPIO:
626 default:
627 return 0;
628 }
629}
630
631static struct stmpe_variant_info stmpe1601 = {
632 .name = "stmpe1601",
633 .id_val = 0x0210,
634 .id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */
635 .num_gpios = 16,
636 .af_bits = 2,
637 .regs = stmpe1601_regs,
638 .blocks = stmpe1601_blocks,
639 .num_blocks = ARRAY_SIZE(stmpe1601_blocks),
640 .num_irqs = STMPE1601_NR_INTERNAL_IRQS,
641 .enable = stmpe1601_enable,
642 .get_altfunc = stmpe1601_get_altfunc,
643 .enable_autosleep = stmpe1601_autosleep,
644};
645
646/*
647 * STMPE1801
648 */
649static const u8 stmpe1801_regs[] = {
650 [STMPE_IDX_CHIP_ID] = STMPE1801_REG_CHIP_ID,
651 [STMPE_IDX_ICR_LSB] = STMPE1801_REG_INT_CTRL_LOW,
652 [STMPE_IDX_IER_LSB] = STMPE1801_REG_INT_EN_MASK_LOW,
653 [STMPE_IDX_ISR_LSB] = STMPE1801_REG_INT_STA_LOW,
654 [STMPE_IDX_GPMR_LSB] = STMPE1801_REG_GPIO_MP_LOW,
655 [STMPE_IDX_GPSR_LSB] = STMPE1801_REG_GPIO_SET_LOW,
656 [STMPE_IDX_GPCR_LSB] = STMPE1801_REG_GPIO_CLR_LOW,
657 [STMPE_IDX_GPDR_LSB] = STMPE1801_REG_GPIO_SET_DIR_LOW,
658 [STMPE_IDX_GPRER_LSB] = STMPE1801_REG_GPIO_RE_LOW,
659 [STMPE_IDX_GPFER_LSB] = STMPE1801_REG_GPIO_FE_LOW,
660 [STMPE_IDX_IEGPIOR_LSB] = STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
661 [STMPE_IDX_ISGPIOR_LSB] = STMPE1801_REG_INT_STA_GPIO_LOW,
662};
663
664static struct stmpe_variant_block stmpe1801_blocks[] = {
665 {
666 .cell = &stmpe_gpio_cell,
667 .irq = STMPE1801_IRQ_GPIOC,
668 .block = STMPE_BLOCK_GPIO,
669 },
670 {
671 .cell = &stmpe_keypad_cell,
672 .irq = STMPE1801_IRQ_KEYPAD,
673 .block = STMPE_BLOCK_KEYPAD,
674 },
675};
676
677static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
678 bool enable)
679{
680 unsigned int mask = 0;
681 if (blocks & STMPE_BLOCK_GPIO)
682 mask |= STMPE1801_MSK_INT_EN_GPIO;
683
684 if (blocks & STMPE_BLOCK_KEYPAD)
685 mask |= STMPE1801_MSK_INT_EN_KPC;
686
687 return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask,
688 enable ? mask : 0);
689}
690
691static int stmpe1801_reset(struct stmpe *stmpe)
692{
693 unsigned long timeout;
694 int ret = 0;
695
696 ret = __stmpe_set_bits(stmpe, STMPE1801_REG_SYS_CTRL,
697 STMPE1801_MSK_SYS_CTRL_RESET, STMPE1801_MSK_SYS_CTRL_RESET);
698 if (ret < 0)
699 return ret;
700
701 timeout = jiffies + msecs_to_jiffies(100);
702 while (time_before(jiffies, timeout)) {
703 ret = __stmpe_reg_read(stmpe, STMPE1801_REG_SYS_CTRL);
704 if (ret < 0)
705 return ret;
706 if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
707 return 0;
708 usleep_range(100, 200);
709 }
710 return -EIO;
711}
712
713static struct stmpe_variant_info stmpe1801 = {
714 .name = "stmpe1801",
715 .id_val = STMPE1801_ID,
716 .id_mask = 0xfff0,
717 .num_gpios = 18,
718 .af_bits = 0,
719 .regs = stmpe1801_regs,
720 .blocks = stmpe1801_blocks,
721 .num_blocks = ARRAY_SIZE(stmpe1801_blocks),
722 .num_irqs = STMPE1801_NR_INTERNAL_IRQS,
723 .enable = stmpe1801_enable,
724 /* stmpe1801 do not have any gpio alternate function */
725 .get_altfunc = NULL,
726};
727
728/*
729 * STMPE24XX
730 */
731
732static const u8 stmpe24xx_regs[] = {
733 [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID,
734 [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB,
735 [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB,
736 [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB,
737 [STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB,
738 [STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB,
739 [STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB,
740 [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB,
741 [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB,
742 [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB,
743 [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB,
744 [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB,
745 [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB,
746 [STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB,
747};
748
749static struct stmpe_variant_block stmpe24xx_blocks[] = {
750 {
751 .cell = &stmpe_gpio_cell,
752 .irq = STMPE24XX_IRQ_GPIOC,
753 .block = STMPE_BLOCK_GPIO,
754 },
755 {
756 .cell = &stmpe_keypad_cell,
757 .irq = STMPE24XX_IRQ_KEYPAD,
758 .block = STMPE_BLOCK_KEYPAD,
759 },
760};
761
762static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
763 bool enable)
764{
765 unsigned int mask = 0;
766
767 if (blocks & STMPE_BLOCK_GPIO)
768 mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO;
769
770 if (blocks & STMPE_BLOCK_KEYPAD)
771 mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
772
773 return __stmpe_set_bits(stmpe, STMPE24XX_REG_SYS_CTRL, mask,
774 enable ? mask : 0);
775}
776
777static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
778{
779 switch (block) {
780 case STMPE_BLOCK_ROTATOR:
781 return 2;
782
783 case STMPE_BLOCK_KEYPAD:
784 return 1;
785
786 case STMPE_BLOCK_GPIO:
787 default:
788 return 0;
789 }
790}
791
792static struct stmpe_variant_info stmpe2401 = {
793 .name = "stmpe2401",
794 .id_val = 0x0101,
795 .id_mask = 0xffff,
796 .num_gpios = 24,
797 .af_bits = 2,
798 .regs = stmpe24xx_regs,
799 .blocks = stmpe24xx_blocks,
800 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
801 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
802 .enable = stmpe24xx_enable,
803 .get_altfunc = stmpe24xx_get_altfunc,
804};
805
806static struct stmpe_variant_info stmpe2403 = {
807 .name = "stmpe2403",
808 .id_val = 0x0120,
809 .id_mask = 0xffff,
810 .num_gpios = 24,
811 .af_bits = 2,
812 .regs = stmpe24xx_regs,
813 .blocks = stmpe24xx_blocks,
814 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
815 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
816 .enable = stmpe24xx_enable,
817 .get_altfunc = stmpe24xx_get_altfunc,
818 .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */
819};
820
821static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
822 [STMPE610] = &stmpe610,
823 [STMPE801] = &stmpe801,
824 [STMPE811] = &stmpe811,
825 [STMPE1601] = &stmpe1601,
826 [STMPE1801] = &stmpe1801,
827 [STMPE2401] = &stmpe2401,
828 [STMPE2403] = &stmpe2403,
829};
830
831/*
832 * These devices can be connected in a 'no-irq' configuration - the irq pin
833 * is not used and the device cannot interrupt the CPU. Here we only list
834 * devices which support this configuration - the driver will fail probing
835 * for any devices not listed here which are configured in this way.
836 */
837static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = {
838 [STMPE801] = &stmpe801_noirq,
839};
840
841static irqreturn_t stmpe_irq(int irq, void *data)
842{
843 struct stmpe *stmpe = data;
844 struct stmpe_variant_info *variant = stmpe->variant;
845 int num = DIV_ROUND_UP(variant->num_irqs, 8);
846 u8 israddr;
847 u8 isr[num];
848 int ret;
849 int i;
850
851 if (variant->id_val == STMPE801_ID) {
852 int base = irq_create_mapping(stmpe->domain, 0);
853
854 handle_nested_irq(base);
855 return IRQ_HANDLED;
856 }
857
858 if (variant->id_val == STMPE1801_ID)
859 israddr = stmpe->regs[STMPE_IDX_ISR_LSB];
860 else
861 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
862
863 ret = stmpe_block_read(stmpe, israddr, num, isr);
864 if (ret < 0)
865 return IRQ_NONE;
866
867 for (i = 0; i < num; i++) {
868 int bank = num - i - 1;
869 u8 status = isr[i];
870 u8 clear;
871
872 status &= stmpe->ier[bank];
873 if (!status)
874 continue;
875
876 clear = status;
877 while (status) {
878 int bit = __ffs(status);
879 int line = bank * 8 + bit;
880 int nestedirq = irq_create_mapping(stmpe->domain, line);
881
882 handle_nested_irq(nestedirq);
883 status &= ~(1 << bit);
884 }
885
886 stmpe_reg_write(stmpe, israddr + i, clear);
887 }
888
889 return IRQ_HANDLED;
890}
891
892static void stmpe_irq_lock(struct irq_data *data)
893{
894 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
895
896 mutex_lock(&stmpe->irq_lock);
897}
898
899static void stmpe_irq_sync_unlock(struct irq_data *data)
900{
901 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
902 struct stmpe_variant_info *variant = stmpe->variant;
903 int num = DIV_ROUND_UP(variant->num_irqs, 8);
904 int i;
905
906 for (i = 0; i < num; i++) {
907 u8 new = stmpe->ier[i];
908 u8 old = stmpe->oldier[i];
909
910 if (new == old)
911 continue;
912
913 stmpe->oldier[i] = new;
914 stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB] - i, new);
915 }
916
917 mutex_unlock(&stmpe->irq_lock);
918}
919
920static void stmpe_irq_mask(struct irq_data *data)
921{
922 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
923 int offset = data->hwirq;
924 int regoffset = offset / 8;
925 int mask = 1 << (offset % 8);
926
927 stmpe->ier[regoffset] &= ~mask;
928}
929
930static void stmpe_irq_unmask(struct irq_data *data)
931{
932 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
933 int offset = data->hwirq;
934 int regoffset = offset / 8;
935 int mask = 1 << (offset % 8);
936
937 stmpe->ier[regoffset] |= mask;
938}
939
940static struct irq_chip stmpe_irq_chip = {
941 .name = "stmpe",
942 .irq_bus_lock = stmpe_irq_lock,
943 .irq_bus_sync_unlock = stmpe_irq_sync_unlock,
944 .irq_mask = stmpe_irq_mask,
945 .irq_unmask = stmpe_irq_unmask,
946};
947
948static int stmpe_irq_map(struct irq_domain *d, unsigned int virq,
949 irq_hw_number_t hwirq)
950{
951 struct stmpe *stmpe = d->host_data;
952 struct irq_chip *chip = NULL;
953
954 if (stmpe->variant->id_val != STMPE801_ID)
955 chip = &stmpe_irq_chip;
956
957 irq_set_chip_data(virq, stmpe);
958 irq_set_chip_and_handler(virq, chip, handle_edge_irq);
959 irq_set_nested_thread(virq, 1);
960#ifdef CONFIG_ARM
961 set_irq_flags(virq, IRQF_VALID);
962#else
963 irq_set_noprobe(virq);
964#endif
965
966 return 0;
967}
968
969static void stmpe_irq_unmap(struct irq_domain *d, unsigned int virq)
970{
971#ifdef CONFIG_ARM
972 set_irq_flags(virq, 0);
973#endif
974 irq_set_chip_and_handler(virq, NULL, NULL);
975 irq_set_chip_data(virq, NULL);
976}
977
978static struct irq_domain_ops stmpe_irq_ops = {
979 .map = stmpe_irq_map,
980 .unmap = stmpe_irq_unmap,
981 .xlate = irq_domain_xlate_twocell,
982};
983
984static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np)
985{
986 int base = 0;
987 int num_irqs = stmpe->variant->num_irqs;
988
989 if (!np)
990 base = stmpe->irq_base;
991
992 stmpe->domain = irq_domain_add_simple(np, num_irqs, base,
993 &stmpe_irq_ops, stmpe);
994 if (!stmpe->domain) {
995 dev_err(stmpe->dev, "Failed to create irqdomain\n");
996 return -ENOSYS;
997 }
998
999 return 0;
1000}
1001
1002static int stmpe_chip_init(struct stmpe *stmpe)
1003{
1004 unsigned int irq_trigger = stmpe->pdata->irq_trigger;
1005 int autosleep_timeout = stmpe->pdata->autosleep_timeout;
1006 struct stmpe_variant_info *variant = stmpe->variant;
1007 u8 icr = 0;
1008 unsigned int id;
1009 u8 data[2];
1010 int ret;
1011
1012 ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID],
1013 ARRAY_SIZE(data), data);
1014 if (ret < 0)
1015 return ret;
1016
1017 id = (data[0] << 8) | data[1];
1018 if ((id & variant->id_mask) != variant->id_val) {
1019 dev_err(stmpe->dev, "unknown chip id: %#x\n", id);
1020 return -EINVAL;
1021 }
1022
1023 dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id);
1024
1025 /* Disable all modules -- subdrivers should enable what they need. */
1026 ret = stmpe_disable(stmpe, ~0);
1027 if (ret)
1028 return ret;
1029
1030 if (id == STMPE1801_ID) {
1031 ret = stmpe1801_reset(stmpe);
1032 if (ret < 0)
1033 return ret;
1034 }
1035
1036 if (stmpe->irq >= 0) {
1037 if (id == STMPE801_ID)
1038 icr = STMPE801_REG_SYS_CTRL_INT_EN;
1039 else
1040 icr = STMPE_ICR_LSB_GIM;
1041
1042 /* STMPE801 doesn't support Edge interrupts */
1043 if (id != STMPE801_ID) {
1044 if (irq_trigger == IRQF_TRIGGER_FALLING ||
1045 irq_trigger == IRQF_TRIGGER_RISING)
1046 icr |= STMPE_ICR_LSB_EDGE;
1047 }
1048
1049 if (irq_trigger == IRQF_TRIGGER_RISING ||
1050 irq_trigger == IRQF_TRIGGER_HIGH) {
1051 if (id == STMPE801_ID)
1052 icr |= STMPE801_REG_SYS_CTRL_INT_HI;
1053 else
1054 icr |= STMPE_ICR_LSB_HIGH;
1055 }
1056 }
1057
1058 if (stmpe->pdata->autosleep) {
1059 ret = stmpe_autosleep(stmpe, autosleep_timeout);
1060 if (ret)
1061 return ret;
1062 }
1063
1064 return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
1065}
1066
1067static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell)
1068{
1069 return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
1070 NULL, stmpe->irq_base, stmpe->domain);
1071}
1072
1073static int stmpe_devices_init(struct stmpe *stmpe)
1074{
1075 struct stmpe_variant_info *variant = stmpe->variant;
1076 unsigned int platform_blocks = stmpe->pdata->blocks;
1077 int ret = -EINVAL;
1078 int i, j;
1079
1080 for (i = 0; i < variant->num_blocks; i++) {
1081 struct stmpe_variant_block *block = &variant->blocks[i];
1082
1083 if (!(platform_blocks & block->block))
1084 continue;
1085
1086 for (j = 0; j < block->cell->num_resources; j++) {
1087 struct resource *res =
1088 (struct resource *) &block->cell->resources[j];
1089
1090 /* Dynamically fill in a variant's IRQ. */
1091 if (res->flags & IORESOURCE_IRQ)
1092 res->start = res->end = block->irq + j;
1093 }
1094
1095 platform_blocks &= ~block->block;
1096 ret = stmpe_add_device(stmpe, block->cell);
1097 if (ret)
1098 return ret;
1099 }
1100
1101 if (platform_blocks)
1102 dev_warn(stmpe->dev,
1103 "platform wants blocks (%#x) not present on variant",
1104 platform_blocks);
1105
1106 return ret;
1107}
1108
1109static void stmpe_of_probe(struct stmpe_platform_data *pdata,
1110 struct device_node *np)
1111{
1112 struct device_node *child;
1113
1114 pdata->id = of_alias_get_id(np, "stmpe-i2c");
1115 if (pdata->id < 0)
1116 pdata->id = -1;
1117
1118 pdata->irq_trigger = IRQF_TRIGGER_NONE;
1119
1120 of_property_read_u32(np, "st,autosleep-timeout",
1121 &pdata->autosleep_timeout);
1122
1123 pdata->autosleep = (pdata->autosleep_timeout) ? true : false;
1124
1125 for_each_child_of_node(np, child) {
1126 if (!strcmp(child->name, "stmpe_gpio")) {
1127 pdata->blocks |= STMPE_BLOCK_GPIO;
1128 } else if (!strcmp(child->name, "stmpe_keypad")) {
1129 pdata->blocks |= STMPE_BLOCK_KEYPAD;
1130 } else if (!strcmp(child->name, "stmpe_touchscreen")) {
1131 pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN;
1132 } else if (!strcmp(child->name, "stmpe_adc")) {
1133 pdata->blocks |= STMPE_BLOCK_ADC;
1134 } else if (!strcmp(child->name, "stmpe_pwm")) {
1135 pdata->blocks |= STMPE_BLOCK_PWM;
1136 } else if (!strcmp(child->name, "stmpe_rotator")) {
1137 pdata->blocks |= STMPE_BLOCK_ROTATOR;
1138 }
1139 }
1140}
1141
1142/* Called from client specific probe routines */
1143int stmpe_probe(struct stmpe_client_info *ci, int partnum)
1144{
1145 struct stmpe_platform_data *pdata = dev_get_platdata(ci->dev);
1146 struct device_node *np = ci->dev->of_node;
1147 struct stmpe *stmpe;
1148 int ret;
1149
1150 if (!pdata) {
1151 if (!np)
1152 return -EINVAL;
1153
1154 pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
1155 if (!pdata)
1156 return -ENOMEM;
1157
1158 stmpe_of_probe(pdata, np);
1159
1160 if (of_find_property(np, "interrupts", NULL) == NULL)
1161 ci->irq = -1;
1162 }
1163
1164 stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
1165 if (!stmpe)
1166 return -ENOMEM;
1167
1168 mutex_init(&stmpe->irq_lock);
1169 mutex_init(&stmpe->lock);
1170
1171 stmpe->dev = ci->dev;
1172 stmpe->client = ci->client;
1173 stmpe->pdata = pdata;
1174 stmpe->irq_base = pdata->irq_base;
1175 stmpe->ci = ci;
1176 stmpe->partnum = partnum;
1177 stmpe->variant = stmpe_variant_info[partnum];
1178 stmpe->regs = stmpe->variant->regs;
1179 stmpe->num_gpios = stmpe->variant->num_gpios;
1180 dev_set_drvdata(stmpe->dev, stmpe);
1181
1182 if (ci->init)
1183 ci->init(stmpe);
1184
1185 if (pdata->irq_over_gpio) {
1186 ret = devm_gpio_request_one(ci->dev, pdata->irq_gpio,
1187 GPIOF_DIR_IN, "stmpe");
1188 if (ret) {
1189 dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n",
1190 ret);
1191 return ret;
1192 }
1193
1194 stmpe->irq = gpio_to_irq(pdata->irq_gpio);
1195 } else {
1196 stmpe->irq = ci->irq;
1197 }
1198
1199 if (stmpe->irq < 0) {
1200 /* use alternate variant info for no-irq mode, if supported */
1201 dev_info(stmpe->dev,
1202 "%s configured in no-irq mode by platform data\n",
1203 stmpe->variant->name);
1204 if (!stmpe_noirq_variant_info[stmpe->partnum]) {
1205 dev_err(stmpe->dev,
1206 "%s does not support no-irq mode!\n",
1207 stmpe->variant->name);
1208 return -ENODEV;
1209 }
1210 stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum];
1211 } else if (pdata->irq_trigger == IRQF_TRIGGER_NONE) {
1212 pdata->irq_trigger = irq_get_trigger_type(stmpe->irq);
1213 }
1214
1215 ret = stmpe_chip_init(stmpe);
1216 if (ret)
1217 return ret;
1218
1219 if (stmpe->irq >= 0) {
1220 ret = stmpe_irq_init(stmpe, np);
1221 if (ret)
1222 return ret;
1223
1224 ret = devm_request_threaded_irq(ci->dev, stmpe->irq, NULL,
1225 stmpe_irq, pdata->irq_trigger | IRQF_ONESHOT,
1226 "stmpe", stmpe);
1227 if (ret) {
1228 dev_err(stmpe->dev, "failed to request IRQ: %d\n",
1229 ret);
1230 return ret;
1231 }
1232 }
1233
1234 ret = stmpe_devices_init(stmpe);
1235 if (!ret)
1236 return 0;
1237
1238 dev_err(stmpe->dev, "failed to add children\n");
1239 mfd_remove_devices(stmpe->dev);
1240
1241 return ret;
1242}
1243
1244int stmpe_remove(struct stmpe *stmpe)
1245{
1246 mfd_remove_devices(stmpe->dev);
1247
1248 return 0;
1249}
1250
1251#ifdef CONFIG_PM
1252static int stmpe_suspend(struct device *dev)
1253{
1254 struct stmpe *stmpe = dev_get_drvdata(dev);
1255
1256 if (stmpe->irq >= 0 && device_may_wakeup(dev))
1257 enable_irq_wake(stmpe->irq);
1258
1259 return 0;
1260}
1261
1262static int stmpe_resume(struct device *dev)
1263{
1264 struct stmpe *stmpe = dev_get_drvdata(dev);
1265
1266 if (stmpe->irq >= 0 && device_may_wakeup(dev))
1267 disable_irq_wake(stmpe->irq);
1268
1269 return 0;
1270}
1271
1272const struct dev_pm_ops stmpe_dev_pm_ops = {
1273 .suspend = stmpe_suspend,
1274 .resume = stmpe_resume,
1275};
1276#endif