Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# HID driver configuration
4#
5menu "HID support"
6 depends on INPUT
7
8config HID
9 tristate "HID bus support"
10 depends on INPUT
11 default y
12 help
13 A human interface device (HID) is a type of computer device that
14 interacts directly with and takes input from humans. The term "HID"
15 most commonly used to refer to the USB-HID specification, but other
16 devices (such as, but not strictly limited to, Bluetooth) are
17 designed using HID specification (this involves certain keyboards,
18 mice, tablets, etc). This option adds the HID bus to the kernel,
19 together with generic HID layer code. The HID devices are added and
20 removed from the HID bus by the transport-layer drivers, such as
21 usbhid (USB_HID) and hidp (BT_HIDP).
22
23 For docs and specs, see https://www.usb.org/developers/hidpage/
24
25 If unsure, say Y.
26
27if HID
28
29config HID_BATTERY_STRENGTH
30 bool "Battery level reporting for HID devices"
31 depends on HID
32 select POWER_SUPPLY
33 default n
34 help
35 This option adds support of reporting battery strength (for HID devices
36 that support this feature) through power_supply class so that userspace
37 tools, such as upower, can display it.
38
39config HIDRAW
40 bool "/dev/hidraw raw HID device support"
41 depends on HID
42 help
43 Say Y here if you want to support HID devices (from the USB
44 specification standpoint) that aren't strictly user interface
45 devices, like monitor controls and Uninterruptible Power Supplies.
46
47 This module supports these devices separately using a separate
48 event interface on /dev/hidraw.
49
50 There is also a /dev/hiddev configuration option in the USB HID
51 configuration menu. In comparison to hiddev, this device does not process
52 the hid events at all (no parsing, no lookups). This lets applications
53 to work on raw hid events when they want to, and avoid using transport-specific
54 userspace libhid/libusb libraries.
55
56 If unsure, say Y.
57
58config UHID
59 tristate "User-space I/O driver support for HID subsystem"
60 depends on HID
61 default n
62 help
63 Say Y here if you want to provide HID I/O Drivers from user-space.
64 This allows to write I/O drivers in user-space and feed the data from
65 the device into the kernel. The kernel parses the HID reports, loads the
66 corresponding HID Device Driver or provides input devices on top of your
67 user-space device.
68
69 This driver cannot be used to parse HID-reports in user-space and write
70 special HID-drivers. You should use hidraw for that.
71 Instead, this driver allows to write the transport-layer driver in
72 user-space like USB-HID and Bluetooth-HID do in kernel-space.
73
74 If unsure, say N.
75
76 To compile this driver as a module, choose M here: the
77 module will be called uhid.
78
79config HID_GENERIC
80 tristate "Generic HID driver"
81 depends on HID
82 default HID
83 help
84 Support for generic devices on the HID bus. This includes most
85 keyboards and mice, joysticks, tablets and digitizers.
86
87 To compile this driver as a module, choose M here: the module
88 will be called hid-generic.
89
90 If unsure, say Y.
91
92menu "Special HID drivers"
93 depends on HID
94
95config HID_A4TECH
96 tristate "A4 tech mice"
97 depends on HID
98 default !EXPERT
99 help
100 Support for A4 tech X5 and WOP-35 / Trust 450L mice.
101
102config HID_ACCUTOUCH
103 tristate "Accutouch touch device"
104 depends on USB_HID
105 help
106 This selects a driver for the Accutouch 2216 touch controller.
107
108 The driver works around a problem in the reported device capabilities
109 which causes userspace to detect the device as a mouse rather than
110 a touchscreen.
111
112 Say Y here if you have a Accutouch 2216 touch controller.
113
114config HID_ACRUX
115 tristate "ACRUX game controller support"
116 depends on HID
117 help
118 Say Y here if you want to enable support for ACRUX game controllers.
119
120config HID_ACRUX_FF
121 bool "ACRUX force feedback support"
122 depends on HID_ACRUX
123 select INPUT_FF_MEMLESS
124 help
125 Say Y here if you want to enable force feedback support for ACRUX
126 game controllers.
127
128config HID_APPLE
129 tristate "Apple {i,Power,Mac}Books"
130 depends on HID
131 default !EXPERT
132 help
133 Support for some Apple devices which less or more break
134 HID specification.
135
136 Say Y here if you want support for keyboards of Apple iBooks, PowerBooks,
137 MacBooks, MacBook Pros and Apple Aluminum.
138
139config HID_APPLEIR
140 tristate "Apple infrared receiver"
141 depends on (USB_HID)
142 help
143 Support for Apple infrared remote control. All the Apple computers from
144 2005 onwards include such a port, except the unibody Macbook (2009),
145 and Mac Pros. This receiver is also used in the Apple TV set-top box
146 prior to the 2010 model.
147
148 Say Y here if you want support for Apple infrared remote control.
149
150config HID_ASUS
151 tristate "Asus"
152 depends on USB_HID
153 depends on LEDS_CLASS
154 depends on ASUS_WMI || ASUS_WMI=n
155 select POWER_SUPPLY
156 help
157 Support for Asus notebook built-in keyboard and touchpad via i2c, and
158 the Asus Republic of Gamers laptop keyboard special keys.
159
160 Supported devices:
161 - EeeBook X205TA
162 - VivoBook E200HA
163 - GL553V series
164 - GL753V series
165
166config HID_AUREAL
167 tristate "Aureal"
168 depends on HID
169 help
170 Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes.
171
172config HID_BELKIN
173 tristate "Belkin Flip KVM and Wireless keyboard"
174 depends on HID
175 default !EXPERT
176 help
177 Support for Belkin Flip KVM and Wireless keyboard.
178
179config HID_BETOP_FF
180 tristate "Betop Production Inc. force feedback support"
181 depends on USB_HID
182 select INPUT_FF_MEMLESS
183 help
184 Say Y here if you want to enable force feedback support for devices by
185 BETOP Production Ltd.
186 Currently the following devices are known to be supported:
187 - BETOP 2185 PC & BFM MODE
188
189config HID_BIGBEN_FF
190 tristate "BigBen Interactive Kids' gamepad support"
191 depends on USB_HID
192 depends on NEW_LEDS
193 depends on LEDS_CLASS
194 select INPUT_FF_MEMLESS
195 help
196 Support for the "Kid-friendly Wired Controller" PS3OFMINIPAD
197 gamepad made by BigBen Interactive, originally sold as a PS3
198 accessory. This driver fixes input mapping and adds support for
199 force feedback effects and LEDs on the device.
200
201config HID_CHERRY
202 tristate "Cherry Cymotion keyboard"
203 depends on HID
204 default !EXPERT
205 help
206 Support for Cherry Cymotion keyboard.
207
208config HID_CHICONY
209 tristate "Chicony devices"
210 depends on HID
211 default !EXPERT
212 help
213 Support for Chicony Tactical pad and special keys on Chicony keyboards.
214
215config HID_CORSAIR
216 tristate "Corsair devices"
217 depends on HID && USB && LEDS_CLASS
218 help
219 Support for Corsair devices that are not fully compliant with the
220 HID standard.
221
222 Supported devices:
223 - Vengeance K90
224 - Scimitar PRO RGB
225
226config HID_COUGAR
227 tristate "Cougar devices"
228 depends on HID
229 help
230 Support for Cougar devices that are not fully compliant with the
231 HID standard.
232
233 Supported devices:
234 - Cougar 500k Gaming Keyboard
235
236config HID_MACALLY
237 tristate "Macally devices"
238 depends on HID
239 help
240 Support for Macally devices that are not fully compliant with the
241 HID standard.
242
243 supported devices:
244 - Macally ikey keyboard
245
246config HID_PRODIKEYS
247 tristate "Prodikeys PC-MIDI Keyboard support"
248 depends on HID && SND
249 select SND_RAWMIDI
250 help
251 Support for Prodikeys PC-MIDI Keyboard device support.
252 Say Y here to enable support for this device.
253 - Prodikeys PC-MIDI keyboard.
254 The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI
255 input and one MIDI output. These MIDI jacks appear as
256 a sound "card" in the ALSA sound system.
257 Note: if you say N here, this device will still function as a basic
258 multimedia keyboard, but will lack support for the musical keyboard
259 and some additional multimedia keys.
260
261config HID_CMEDIA
262 tristate "CMedia CM6533 HID audio jack controls"
263 depends on HID
264 help
265 Support for CMedia CM6533 HID audio jack controls.
266
267config HID_CP2112
268 tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
269 depends on USB_HID && HIDRAW && I2C && GPIOLIB
270 select GPIOLIB_IRQCHIP
271 help
272 Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
273 This is a HID device driver which registers as an i2c adapter
274 and gpiochip to expose these functions of the CP2112. The
275 customizable USB descriptor fields are exposed as sysfs attributes.
276
277config HID_CREATIVE_SB0540
278 tristate "Creative SB0540 infrared receiver"
279 depends on USB_HID
280 help
281 Support for Creative infrared SB0540-compatible remote controls, such
282 as the RM-1500 and RM-1800 remotes.
283
284 Say Y here if you want support for Creative SB0540 infrared receiver.
285
286config HID_CYPRESS
287 tristate "Cypress mouse and barcode readers"
288 depends on HID
289 default !EXPERT
290 help
291 Support for cypress mouse and barcode readers.
292
293config HID_DRAGONRISE
294 tristate "DragonRise Inc. game controller"
295 depends on HID
296 help
297 Say Y here if you have DragonRise Inc. game controllers.
298 These might be branded as:
299 - Tesun USB-703
300 - Media-tech MT1504 "Rogue"
301 - DVTech JS19 "Gear"
302 - Defender Game Master
303
304config DRAGONRISE_FF
305 bool "DragonRise Inc. force feedback"
306 depends on HID_DRAGONRISE
307 select INPUT_FF_MEMLESS
308 help
309 Say Y here if you want to enable force feedback support for DragonRise Inc.
310 game controllers.
311
312config HID_EMS_FF
313 tristate "EMS Production Inc. force feedback support"
314 depends on HID
315 select INPUT_FF_MEMLESS
316 help
317 Say Y here if you want to enable force feedback support for devices by
318 EMS Production Ltd.
319 Currently the following devices are known to be supported:
320 - Trio Linker Plus II
321
322config HID_ELAN
323 tristate "ELAN USB Touchpad Support"
324 depends on LEDS_CLASS && USB_HID
325 help
326 Say Y to enable support for the USB ELAN touchpad
327 Currently the following devices are known to be supported:
328 - HP Pavilion X2 10-p0XX.
329
330config HID_ELECOM
331 tristate "ELECOM HID devices"
332 depends on HID
333 help
334 Support for ELECOM devices:
335 - BM084 Bluetooth Mouse
336 - EX-G Trackballs (M-XT3DRBK, M-XT3URBK)
337 - DEFT Trackballs (M-DT1DRBK, M-DT1URBK, M-DT2DRBK, M-DT2URBK)
338 - HUGE Trackballs (M-HT1DRBK, M-HT1URBK)
339
340config HID_ELO
341 tristate "ELO USB 4000/4500 touchscreen"
342 depends on USB_HID
343 help
344 Support for the ELO USB 4000/4500 touchscreens. Note that this is for
345 different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
346
347config HID_EZKEY
348 tristate "Ezkey BTC 8193 keyboard"
349 depends on HID
350 default !EXPERT
351 help
352 Support for Ezkey BTC 8193 keyboard.
353
354config HID_GEMBIRD
355 tristate "Gembird Joypad"
356 depends on HID
357 help
358 Support for Gembird JPD-DualForce 2.
359
360config HID_GFRM
361 tristate "Google Fiber TV Box remote control support"
362 depends on HID
363 help
364 Support for Google Fiber TV Box remote controls
365
366config HID_GLORIOUS
367 tristate "Glorious PC Gaming Race mice"
368 depends on HID
369 help
370 Support for Glorious PC Gaming Race mice such as
371 the Glorious Model O, O- and D.
372
373config HID_HOLTEK
374 tristate "Holtek HID devices"
375 depends on USB_HID
376 help
377 Support for Holtek based devices:
378 - Holtek On Line Grip based game controller
379 - Trust GXT 18 Gaming Keyboard
380 - Sharkoon Drakonia / Perixx MX-2000 gaming mice
381 - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 /
382 Zalman ZM-GM1
383 - SHARKOON DarkGlider Gaming mouse
384 - LEETGION Hellion Gaming Mouse
385
386config HOLTEK_FF
387 bool "Holtek On Line Grip force feedback support"
388 depends on HID_HOLTEK
389 select INPUT_FF_MEMLESS
390 help
391 Say Y here if you have a Holtek On Line Grip based game controller
392 and want to have force feedback support for it.
393
394config HID_GOOGLE_HAMMER
395 tristate "Google Hammer Keyboard"
396 depends on USB_HID && LEDS_CLASS && CROS_EC
397 help
398 Say Y here if you have a Google Hammer device.
399
400config HID_GT683R
401 tristate "MSI GT68xR LED support"
402 depends on LEDS_CLASS && USB_HID
403 help
404 Say Y here if you want to enable support for the three MSI GT68xR LEDs
405
406 This driver support following modes:
407 - Normal: LEDs are fully on when enabled
408 - Audio: LEDs brightness depends on sound level
409 - Breathing: LEDs brightness varies at human breathing rate
410
411 Currently the following devices are know to be supported:
412 - MSI GT683R
413
414config HID_KEYTOUCH
415 tristate "Keytouch HID devices"
416 depends on HID
417 help
418 Support for Keytouch HID devices not fully compliant with
419 the specification. Currently supported:
420 - Keytouch IEC 60945
421
422config HID_KYE
423 tristate "KYE/Genius devices"
424 depends on HID
425 help
426 Support for KYE/Genius devices not fully compliant with HID standard:
427 - Ergo Mouse
428 - EasyPen i405X tablet
429 - MousePen i608X tablet
430 - EasyPen M610X tablet
431
432config HID_UCLOGIC
433 tristate "UC-Logic"
434 depends on USB_HID
435 help
436 Support for UC-Logic and Huion tablets.
437
438config HID_WALTOP
439 tristate "Waltop"
440 depends on HID
441 help
442 Support for Waltop tablets.
443
444config HID_VIEWSONIC
445 tristate "ViewSonic/Signotec"
446 depends on HID
447 help
448 Support for ViewSonic/Signotec PD1011 signature pad.
449
450config HID_GYRATION
451 tristate "Gyration remote control"
452 depends on HID
453 help
454 Support for Gyration remote control.
455
456config HID_ICADE
457 tristate "ION iCade arcade controller"
458 depends on HID
459 help
460 Support for the ION iCade arcade controller to work as a joystick.
461
462 To compile this driver as a module, choose M here: the
463 module will be called hid-icade.
464
465config HID_ITE
466 tristate "ITE devices"
467 depends on HID
468 default !EXPERT
469 help
470 Support for ITE devices not fully compliant with HID standard.
471
472config HID_JABRA
473 tristate "Jabra USB HID Driver"
474 depends on HID
475 help
476 Support for Jabra USB HID devices.
477
478 Prevents mapping of vendor defined HID usages to input events. Without
479 this driver HID reports from Jabra devices may incorrectly be seen as
480 mouse button events.
481 Say M here if you may ever plug in a Jabra USB device.
482
483config HID_TWINHAN
484 tristate "Twinhan IR remote control"
485 depends on HID
486 help
487 Support for Twinhan IR remote control.
488
489config HID_KENSINGTON
490 tristate "Kensington Slimblade Trackball"
491 depends on HID
492 default !EXPERT
493 help
494 Support for Kensington Slimblade Trackball.
495
496config HID_LCPOWER
497 tristate "LC-Power"
498 depends on HID
499 help
500 Support for LC-Power RC1000MCE RF remote control.
501
502config HID_LED
503 tristate "Simple RGB LED support"
504 depends on HID
505 depends on LEDS_CLASS
506 help
507 Support for simple RGB LED devices. Currently supported are:
508 - Riso Kagaku Webmail Notifier
509 - Dream Cheeky Webmail Notifier and Friends Alert
510 - ThingM blink(1)
511 - Delcom Visual Signal Indicator Generation 2
512 - Greynut Luxafor
513
514 To compile this driver as a module, choose M here: the
515 module will be called hid-led.
516
517config HID_LENOVO
518 tristate "Lenovo / Thinkpad devices"
519 depends on HID
520 select NEW_LEDS
521 select LEDS_CLASS
522 help
523 Support for IBM/Lenovo devices that are not fully compliant with HID standard.
524
525 Say Y if you want support for horizontal scrolling of the IBM/Lenovo
526 Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad
527 standalone keyboards, e.g:
528 - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint
529 configuration)
530 - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys)
531 - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys)
532
533config HID_LOGITECH
534 tristate "Logitech devices"
535 depends on HID
536 depends on LEDS_CLASS
537 default !EXPERT
538 help
539 Support for Logitech devices that are not fully compliant with HID standard.
540
541config HID_LOGITECH_DJ
542 tristate "Logitech receivers full support"
543 depends on USB_HID
544 depends on HIDRAW
545 depends on HID_LOGITECH
546 select HID_LOGITECH_HIDPP
547 help
548 Say Y if you want support for Logitech receivers and devices.
549 Logitech receivers are capable of pairing multiple Logitech compliant
550 devices to the same receiver. Without this driver it will be handled by
551 generic USB_HID driver and all incoming events will be multiplexed
552 into a single mouse and a single keyboard device.
553
554config HID_LOGITECH_HIDPP
555 tristate "Logitech HID++ devices support"
556 depends on HID_LOGITECH
557 select POWER_SUPPLY
558 help
559 Support for Logitech devices relyingon the HID++ Logitech specification
560
561 Say Y if you want support for Logitech devices relying on the HID++
562 specification. Such devices are the various Logitech Touchpads (T650,
563 T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar
564 Keyboard).
565
566config LOGITECH_FF
567 bool "Logitech force feedback support"
568 depends on HID_LOGITECH
569 select INPUT_FF_MEMLESS
570 help
571 Say Y here if you have one of these devices:
572 - Logitech WingMan Cordless RumblePad
573 - Logitech WingMan Cordless RumblePad 2
574 - Logitech WingMan Force 3D
575
576 and if you want to enable force feedback for them.
577 Note: if you say N here, this device will still be supported, but without
578 force feedback.
579
580config LOGIRUMBLEPAD2_FF
581 bool "Logitech force feedback support (variant 2)"
582 depends on HID_LOGITECH
583 select INPUT_FF_MEMLESS
584 help
585 Say Y here if you want to enable force feedback support for:
586 - Logitech RumblePad
587 - Logitech Rumblepad 2
588 - Logitech Formula Vibration Feedback Wheel
589
590config LOGIG940_FF
591 bool "Logitech Flight System G940 force feedback support"
592 depends on HID_LOGITECH
593 select INPUT_FF_MEMLESS
594 help
595 Say Y here if you want to enable force feedback support for Logitech
596 Flight System G940 devices.
597
598config LOGIWHEELS_FF
599 bool "Logitech wheels configuration and force feedback support"
600 depends on HID_LOGITECH
601 select INPUT_FF_MEMLESS
602 default LOGITECH_FF
603 help
604 Say Y here if you want to enable force feedback and range setting(*)
605 support for following Logitech wheels:
606 - Logitech G25 (*)
607 - Logitech G27 (*)
608 - Logitech G29 (*)
609 - Logitech Driving Force
610 - Logitech Driving Force Pro (*)
611 - Logitech Driving Force GT (*)
612 - Logitech Driving Force EX/RX
613 - Logitech Driving Force Wireless
614 - Logitech Speed Force Wireless
615 - Logitech MOMO Force
616 - Logitech MOMO Racing Force
617 - Logitech Formula Force GP
618 - Logitech Formula Force EX/RX
619 - Logitech Wingman Formula Force GP
620
621config HID_MAGICMOUSE
622 tristate "Apple Magic Mouse/Trackpad multi-touch support"
623 depends on HID
624 help
625 Support for the Apple Magic Mouse/Trackpad multi-touch.
626
627 Say Y here if you want support for the multi-touch features of the
628 Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad.
629
630config HID_MALTRON
631 tristate "Maltron L90 keyboard"
632 depends on HID
633 help
634 Adds support for the volume up, volume down, mute, and play/pause buttons
635 of the Maltron L90 keyboard.
636
637config HID_MAYFLASH
638 tristate "Mayflash game controller adapter force feedback"
639 depends on HID
640 select INPUT_FF_MEMLESS
641 help
642 Say Y here if you have HJZ Mayflash PS3 game controller adapters
643 and want to enable force feedback support.
644
645config HID_REDRAGON
646 tristate "Redragon keyboards"
647 depends on HID
648 default !EXPERT
649 help
650 Support for Redragon keyboards that need fix-ups to work properly.
651
652config HID_MICROSOFT
653 tristate "Microsoft non-fully HID-compliant devices"
654 depends on HID
655 default !EXPERT
656 select INPUT_FF_MEMLESS
657 help
658 Support for Microsoft devices that are not fully compliant with HID standard.
659
660config HID_MONTEREY
661 tristate "Monterey Genius KB29E keyboard"
662 depends on HID
663 default !EXPERT
664 help
665 Support for Monterey Genius KB29E.
666
667config HID_MULTITOUCH
668 tristate "HID Multitouch panels"
669 depends on HID
670 help
671 Generic support for HID multitouch panels.
672
673 Say Y here if you have one of the following devices:
674 - 3M PCT touch screens
675 - ActionStar dual touch panels
676 - Atmel panels
677 - Cando dual touch panels
678 - Chunghwa panels
679 - CJTouch panels
680 - CVTouch panels
681 - Cypress TrueTouch panels
682 - Elan Microelectronics touch panels
683 - Elo TouchSystems IntelliTouch Plus panels
684 - GeneralTouch 'Sensing Win7-TwoFinger' panels
685 - GoodTouch panels
686 - Hanvon dual touch panels
687 - Ilitek dual touch panels
688 - IrTouch Infrared USB panels
689 - LG Display panels (Dell ST2220Tc)
690 - Lumio CrystalTouch panels
691 - MosArt dual-touch panels
692 - Panasonic multitouch panels
693 - PenMount dual touch panels
694 - Perixx Peripad 701 touchpad
695 - PixArt optical touch screen
696 - Pixcir dual touch panels
697 - Quanta panels
698 - eGalax dual-touch panels, including the Joojoo and Wetab tablets
699 - SiS multitouch panels
700 - Stantum multitouch panels
701 - Touch International Panels
702 - Unitec Panels
703 - Wistron optical touch panels
704 - XAT optical touch panels
705 - Xiroku optical touch panels
706 - Zytronic touch panels
707
708 If unsure, say N.
709
710 To compile this driver as a module, choose M here: the
711 module will be called hid-multitouch.
712
713config HID_NTI
714 tristate "NTI keyboard adapters"
715 help
716 Support for the "extra" Sun keyboard keys on keyboards attached
717 through Network Technologies USB-SUN keyboard adapters.
718
719config HID_NTRIG
720 tristate "N-Trig touch screen"
721 depends on USB_HID
722 help
723 Support for N-Trig touch screen.
724
725config HID_ORTEK
726 tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad"
727 depends on HID
728 help
729 There are certain devices which have LogicalMaximum wrong in the keyboard
730 usage page of their report descriptor. The most prevailing ones so far
731 are manufactured by Ortek, thus the name of the driver. Currently
732 supported devices by this driver are
733
734 - Ortek PKB-1700
735 - Ortek WKB-2000
736 - Skycable wireless presenter
737
738config HID_PANTHERLORD
739 tristate "Pantherlord/GreenAsia game controller"
740 depends on HID
741 help
742 Say Y here if you have a PantherLord/GreenAsia based game controller
743 or adapter.
744
745config PANTHERLORD_FF
746 bool "Pantherlord force feedback support"
747 depends on HID_PANTHERLORD
748 select INPUT_FF_MEMLESS
749 help
750 Say Y here if you have a PantherLord/GreenAsia based game controller
751 or adapter and want to enable force feedback support for it.
752
753config HID_PENMOUNT
754 tristate "Penmount touch device"
755 depends on USB_HID
756 help
757 This selects a driver for the PenMount 6000 touch controller.
758
759 The driver works around a problem in the report descript allowing
760 the userspace to touch events instead of mouse events.
761
762 Say Y here if you have a Penmount based touch controller.
763
764config HID_PETALYNX
765 tristate "Petalynx Maxter remote control"
766 depends on HID
767 help
768 Support for Petalynx Maxter remote control.
769
770config HID_PICOLCD
771 tristate "PicoLCD (graphic version)"
772 depends on HID
773 help
774 This provides support for Minibox PicoLCD devices, currently
775 only the graphical ones are supported.
776
777 This includes support for the following device features:
778 - Keypad
779 - Switching between Firmware and Flash mode
780 - EEProm / Flash access (via debugfs)
781 Features selectively enabled:
782 - Framebuffer for monochrome 256x64 display
783 - Backlight control
784 - Contrast control
785 - General purpose outputs
786 Features that are not (yet) supported:
787 - IR
788
789config HID_PICOLCD_FB
790 bool "Framebuffer support" if EXPERT
791 default !EXPERT
792 depends on HID_PICOLCD
793 depends on HID_PICOLCD=FB || FB=y
794 select FB_DEFERRED_IO
795 select FB_SYS_FILLRECT
796 select FB_SYS_COPYAREA
797 select FB_SYS_IMAGEBLIT
798 select FB_SYS_FOPS
799 help
800 Provide access to PicoLCD's 256x64 monochrome display via a
801 framebuffer device.
802
803config HID_PICOLCD_BACKLIGHT
804 bool "Backlight control" if EXPERT
805 default !EXPERT
806 depends on HID_PICOLCD
807 depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y
808 help
809 Provide access to PicoLCD's backlight control via backlight
810 class.
811
812config HID_PICOLCD_LCD
813 bool "Contrast control" if EXPERT
814 default !EXPERT
815 depends on HID_PICOLCD
816 depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y
817 help
818 Provide access to PicoLCD's LCD contrast via lcd class.
819
820config HID_PICOLCD_LEDS
821 bool "GPO via leds class" if EXPERT
822 default !EXPERT
823 depends on HID_PICOLCD
824 depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y
825 help
826 Provide access to PicoLCD's GPO pins via leds class.
827
828config HID_PICOLCD_CIR
829 bool "CIR via RC class" if EXPERT
830 default !EXPERT
831 depends on HID_PICOLCD
832 depends on HID_PICOLCD=RC_CORE || RC_CORE=y
833 help
834 Provide access to PicoLCD's CIR interface via remote control (LIRC).
835
836config HID_PLANTRONICS
837 tristate "Plantronics USB HID Driver"
838 depends on HID
839 help
840 Provides HID support for Plantronics USB audio devices.
841 Correctly maps vendor unique volume up/down HID usages to
842 KEY_VOLUMEUP and KEY_VOLUMEDOWN events and prevents core mapping
843 of other vendor unique HID usages to random mouse events.
844
845 Say M here if you may ever plug in a Plantronics USB audio device.
846
847config HID_PRIMAX
848 tristate "Primax non-fully HID-compliant devices"
849 depends on HID
850 help
851 Support for Primax devices that are not fully compliant with the
852 HID standard.
853
854config HID_RETRODE
855 tristate "Retrode 2 USB adapter for vintage video games"
856 depends on USB_HID
857 help
858 Support for
859 * Retrode 2 cartridge and controller adapter
860
861config HID_ROCCAT
862 tristate "Roccat device support"
863 depends on USB_HID
864 help
865 Support for Roccat devices.
866 Say Y here if you have a Roccat mouse or keyboard and want
867 support for its special functionalities.
868
869config HID_SAITEK
870 tristate "Saitek (Mad Catz) non-fully HID-compliant devices"
871 depends on HID
872 help
873 Support for Saitek devices that are not fully compliant with the
874 HID standard.
875
876 Supported devices:
877 - PS1000 Dual Analog Pad
878 - Saitek R.A.T.7, R.A.T.9, M.M.O.7 Gaming Mice
879 - Mad Catz R.A.T.5, R.A.T.9 Gaming Mice
880
881config HID_SAMSUNG
882 tristate "Samsung InfraRed remote control or keyboards"
883 depends on HID
884 help
885 Support for Samsung InfraRed remote control or keyboards.
886
887config HID_SONY
888 tristate "Sony PS2/3/4 accessories"
889 depends on USB_HID
890 depends on NEW_LEDS
891 depends on LEDS_CLASS
892 select POWER_SUPPLY
893 help
894 Support for
895
896 * Sony PS3 6-axis controllers
897 * Sony PS4 DualShock 4 controllers
898 * Buzz controllers
899 * Sony PS3 Blue-ray Disk Remote Control (Bluetooth)
900 * Logitech Harmony adapter for Sony Playstation 3 (Bluetooth)
901
902config SONY_FF
903 bool "Sony PS2/3/4 accessories force feedback support"
904 depends on HID_SONY
905 select INPUT_FF_MEMLESS
906 help
907 Say Y here if you have a Sony PS2/3/4 accessory and want to enable
908 force feedback support for it.
909
910config HID_SPEEDLINK
911 tristate "Speedlink VAD Cezanne mouse support"
912 depends on HID
913 help
914 Support for Speedlink Vicious and Divine Cezanne mouse.
915
916config HID_STEAM
917 tristate "Steam Controller support"
918 depends on HID
919 select POWER_SUPPLY
920 help
921 Say Y here if you have a Steam Controller if you want to use it
922 without running the Steam Client. It supports both the wired and
923 the wireless adaptor.
924
925config HID_STEELSERIES
926 tristate "Steelseries SRW-S1 steering wheel support"
927 depends on HID
928 help
929 Support for Steelseries SRW-S1 steering wheel
930
931config HID_SUNPLUS
932 tristate "Sunplus wireless desktop"
933 depends on HID
934 help
935 Support for Sunplus wireless desktop.
936
937config HID_RMI
938 tristate "Synaptics RMI4 device support"
939 depends on HID
940 select RMI4_CORE
941 select RMI4_F03
942 select RMI4_F11
943 select RMI4_F12
944 select RMI4_F30
945 help
946 Support for Synaptics RMI4 touchpads.
947 Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid
948 and want support for its special functionalities.
949
950config HID_GREENASIA
951 tristate "GreenAsia (Product ID 0x12) game controller support"
952 depends on HID
953 help
954 Say Y here if you have a GreenAsia (Product ID 0x12) based game
955 controller or adapter.
956
957config GREENASIA_FF
958 bool "GreenAsia (Product ID 0x12) force feedback support"
959 depends on HID_GREENASIA
960 select INPUT_FF_MEMLESS
961 help
962 Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
963 (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
964 and want to enable force feedback support for it.
965
966config HID_HYPERV_MOUSE
967 tristate "Microsoft Hyper-V mouse driver"
968 depends on HYPERV
969 help
970 Select this option to enable the Hyper-V mouse driver.
971
972config HID_SMARTJOYPLUS
973 tristate "SmartJoy PLUS PS2/USB adapter support"
974 depends on HID
975 help
976 Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box,
977 Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro.
978
979 Note that DDR (Dance Dance Revolution) mode is not supported, nor
980 is pressure sensitive buttons on the pro models.
981
982config SMARTJOYPLUS_FF
983 bool "SmartJoy PLUS PS2/USB adapter force feedback support"
984 depends on HID_SMARTJOYPLUS
985 select INPUT_FF_MEMLESS
986 help
987 Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
988 enable force feedback support for it.
989
990config HID_TIVO
991 tristate "TiVo Slide Bluetooth remote control support"
992 depends on HID
993 help
994 Say Y if you have a TiVo Slide Bluetooth remote control.
995
996config HID_TOPSEED
997 tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support"
998 depends on HID
999 help
1000 Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
1001 CLLRCMCE remote control.
1002
1003config HID_THINGM
1004 tristate "ThingM blink(1) USB RGB LED"
1005 depends on HID
1006 depends on LEDS_CLASS
1007 select HID_LED
1008 help
1009 Support for the ThingM blink(1) USB RGB LED. This driver has been
1010 merged into the generic hid led driver. Config symbol HID_THINGM
1011 just selects HID_LED and will be removed soon.
1012
1013config HID_THRUSTMASTER
1014 tristate "ThrustMaster devices support"
1015 depends on HID
1016 help
1017 Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
1018 a THRUSTMASTER Ferrari GT Rumble Wheel.
1019
1020config THRUSTMASTER_FF
1021 bool "ThrustMaster devices force feedback support"
1022 depends on HID_THRUSTMASTER
1023 select INPUT_FF_MEMLESS
1024 help
1025 Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or 3,
1026 a THRUSTMASTER Dual Trigger 3-in-1 or a THRUSTMASTER Ferrari GT
1027 Rumble Force or Force Feedback Wheel.
1028
1029config HID_UDRAW_PS3
1030 tristate "THQ PS3 uDraw tablet"
1031 depends on HID
1032 help
1033 Say Y here if you want to use the THQ uDraw gaming tablet for
1034 the PS3.
1035
1036config HID_U2FZERO
1037 tristate "U2F Zero LED and RNG support"
1038 depends on USB_HID
1039 depends on LEDS_CLASS
1040 depends on HW_RANDOM
1041 help
1042 Support for the LED of the U2F Zero device.
1043
1044 U2F Zero supports custom commands for blinking the LED
1045 and getting data from the internal hardware RNG.
1046 The internal hardware can be used to feed the enthropy pool.
1047
1048 U2F Zero only supports blinking its LED, so this driver doesn't
1049 allow setting the brightness to anything but 1, which will
1050 trigger a single blink and immediately reset back to 0.
1051
1052config HID_WACOM
1053 tristate "Wacom Intuos/Graphire tablet support (USB)"
1054 depends on USB_HID
1055 select POWER_SUPPLY
1056 select NEW_LEDS
1057 select LEDS_CLASS
1058 select LEDS_TRIGGERS
1059 help
1060 Say Y here if you want to use the USB or BT version of the Wacom Intuos
1061 or Graphire tablet.
1062
1063 To compile this driver as a module, choose M here: the
1064 module will be called wacom.
1065
1066config HID_WIIMOTE
1067 tristate "Nintendo Wii / Wii U peripherals"
1068 depends on HID
1069 depends on LEDS_CLASS
1070 select POWER_SUPPLY
1071 select INPUT_FF_MEMLESS
1072 help
1073 Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported
1074 devices are the Wii Remote and its extension devices, but also devices
1075 based on the Wii Remote like the Wii U Pro Controller or the
1076 Wii Balance Board.
1077
1078 Support for all official Nintendo extensions is available, however, 3rd
1079 party extensions might not be supported. Please report these devices to:
1080 http://github.com/dvdhrm/xwiimote/issues
1081
1082 Other Nintendo Wii U peripherals that are IEEE 802.11 based (including
1083 the Wii U Gamepad) might be supported in the future. But currently
1084 support is limited to Bluetooth based devices.
1085
1086 If unsure, say N.
1087
1088 To compile this driver as a module, choose M here: the
1089 module will be called hid-wiimote.
1090
1091config HID_XINMO
1092 tristate "Xin-Mo non-fully compliant devices"
1093 depends on HID
1094 help
1095 Support for Xin-Mo devices that are not fully compliant with the HID
1096 standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here
1097 if you have a Xin-Mo Dual Arcade controller.
1098
1099config HID_ZEROPLUS
1100 tristate "Zeroplus based game controller support"
1101 depends on HID
1102 help
1103 Say Y here if you have a Zeroplus based game controller.
1104
1105config ZEROPLUS_FF
1106 bool "Zeroplus based game controller force feedback support"
1107 depends on HID_ZEROPLUS
1108 select INPUT_FF_MEMLESS
1109 help
1110 Say Y here if you have a Zeroplus based game controller and want
1111 to have force feedback support for it.
1112
1113config HID_ZYDACRON
1114 tristate "Zydacron remote control support"
1115 depends on HID
1116 help
1117 Support for Zydacron remote control.
1118
1119config HID_SENSOR_HUB
1120 tristate "HID Sensors framework support"
1121 depends on HID && HAS_IOMEM
1122 select MFD_CORE
1123 default n
1124 help
1125 Support for HID Sensor framework. This creates a MFD instance
1126 for a sensor hub and identifies all the sensors connected to it.
1127 Each sensor is registered as a MFD cell, so that sensor specific
1128 processing can be done in a separate driver. Each sensor
1129 drivers can use the service provided by this driver to register
1130 for events and handle data streams. Each sensor driver can format
1131 data and present to user mode using input or IIO interface.
1132
1133config HID_SENSOR_CUSTOM_SENSOR
1134 tristate "HID Sensors hub custom sensor support"
1135 depends on HID_SENSOR_HUB
1136 default n
1137 help
1138 HID Sensor hub specification allows definition of some custom and
1139 generic sensors. Unlike other HID sensors, they can't be exported
1140 via Linux IIO because of custom fields. This is up to the manufacturer
1141 to decide how to interpret these special sensor ids and process in
1142 the user space. Currently some manufacturers are using these ids for
1143 sensor calibration and debugging other sensors. Manufacturers
1144 shouldn't use these special custom sensor ids to export any of the
1145 standard sensors.
1146 Select this config option for custom/generic sensor support.
1147
1148config HID_ALPS
1149 tristate "Alps HID device support"
1150 depends on HID
1151 help
1152 Support for Alps I2C HID touchpads and StickPointer.
1153 Say Y here if you have a Alps touchpads over i2c-hid or usbhid
1154 and want support for its special functionalities.
1155
1156config HID_MCP2221
1157 tristate "Microchip MCP2221 HID USB-to-I2C/SMbus host support"
1158 depends on USB_HID && I2C
1159 depends on GPIOLIB
1160 help
1161 Provides I2C and SMBUS host adapter functionality over USB-HID
1162 through MCP2221 device.
1163
1164 To compile this driver as a module, choose M here: the module
1165 will be called hid-mcp2221.ko.
1166
1167endmenu
1168
1169endif # HID
1170
1171source "drivers/hid/usbhid/Kconfig"
1172
1173source "drivers/hid/i2c-hid/Kconfig"
1174
1175source "drivers/hid/intel-ish-hid/Kconfig"
1176
1177endmenu
1#
2# HID driver configuration
3#
4menu "HID support"
5 depends on INPUT
6
7config HID
8 tristate "HID bus support"
9 depends on INPUT
10 default y
11 ---help---
12 A human interface device (HID) is a type of computer device that
13 interacts directly with and takes input from humans. The term "HID"
14 most commonly used to refer to the USB-HID specification, but other
15 devices (such as, but not strictly limited to, Bluetooth) are
16 designed using HID specification (this involves certain keyboards,
17 mice, tablets, etc). This option adds the HID bus to the kernel,
18 together with generic HID layer code. The HID devices are added and
19 removed from the HID bus by the transport-layer drivers, such as
20 usbhid (USB_HID) and hidp (BT_HIDP).
21
22 For docs and specs, see http://www.usb.org/developers/hidpage/
23
24 If unsure, say Y.
25
26if HID
27
28config HID_BATTERY_STRENGTH
29 bool "Battery level reporting for HID devices"
30 depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY
31 default n
32 ---help---
33 This option adds support of reporting battery strength (for HID devices
34 that support this feature) through power_supply class so that userspace
35 tools, such as upower, can display it.
36
37config HIDRAW
38 bool "/dev/hidraw raw HID device support"
39 depends on HID
40 ---help---
41 Say Y here if you want to support HID devices (from the USB
42 specification standpoint) that aren't strictly user interface
43 devices, like monitor controls and Uninterruptable Power Supplies.
44
45 This module supports these devices separately using a separate
46 event interface on /dev/hidraw.
47
48 There is also a /dev/hiddev configuration option in the USB HID
49 configuration menu. In comparison to hiddev, this device does not process
50 the hid events at all (no parsing, no lookups). This lets applications
51 to work on raw hid events when they want to, and avoid using transport-specific
52 userspace libhid/libusb libraries.
53
54 If unsure, say Y.
55
56config UHID
57 tristate "User-space I/O driver support for HID subsystem"
58 depends on HID
59 default n
60 ---help---
61 Say Y here if you want to provide HID I/O Drivers from user-space.
62 This allows to write I/O drivers in user-space and feed the data from
63 the device into the kernel. The kernel parses the HID reports, loads the
64 corresponding HID Device Driver or provides input devices on top of your
65 user-space device.
66
67 This driver cannot be used to parse HID-reports in user-space and write
68 special HID-drivers. You should use hidraw for that.
69 Instead, this driver allows to write the transport-layer driver in
70 user-space like USB-HID and Bluetooth-HID do in kernel-space.
71
72 If unsure, say N.
73
74 To compile this driver as a module, choose M here: the
75 module will be called uhid.
76
77config HID_GENERIC
78 tristate "Generic HID driver"
79 depends on HID
80 default HID
81 ---help---
82 Support for generic devices on the HID bus. This includes most
83 keyboards and mice, joysticks, tablets and digitizers.
84
85 To compile this driver as a module, choose M here: the module
86 will be called hid-generic.
87
88 If unsure, say Y.
89
90menu "Special HID drivers"
91 depends on HID
92
93config HID_A4TECH
94 tristate "A4 tech mice" if EXPERT
95 depends on HID
96 default !EXPERT
97 ---help---
98 Support for A4 tech X5 and WOP-35 / Trust 450L mice.
99
100config HID_ACRUX
101 tristate "ACRUX game controller support"
102 depends on HID
103 ---help---
104 Say Y here if you want to enable support for ACRUX game controllers.
105
106config HID_ACRUX_FF
107 bool "ACRUX force feedback support"
108 depends on HID_ACRUX
109 select INPUT_FF_MEMLESS
110 ---help---
111 Say Y here if you want to enable force feedback support for ACRUX
112 game controllers.
113
114config HID_APPLE
115 tristate "Apple {i,Power,Mac}Books" if EXPERT
116 depends on HID
117 default !EXPERT
118 ---help---
119 Support for some Apple devices which less or more break
120 HID specification.
121
122 Say Y here if you want support for keyboards of Apple iBooks, PowerBooks,
123 MacBooks, MacBook Pros and Apple Aluminum.
124
125config HID_APPLEIR
126 tristate "Apple infrared receiver"
127 depends on (USB_HID)
128 ---help---
129 Support for Apple infrared remote control. All the Apple computers from
130 2005 onwards include such a port, except the unibody Macbook (2009),
131 and Mac Pros. This receiver is also used in the Apple TV set-top box
132 prior to the 2010 model.
133
134 Say Y here if you want support for Apple infrared remote control.
135
136config HID_AUREAL
137 tristate "Aureal"
138 depends on HID
139 ---help---
140 Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes.
141
142config HID_BELKIN
143 tristate "Belkin Flip KVM and Wireless keyboard" if EXPERT
144 depends on HID
145 default !EXPERT
146 ---help---
147 Support for Belkin Flip KVM and Wireless keyboard.
148
149config HID_CHERRY
150 tristate "Cherry Cymotion keyboard" if EXPERT
151 depends on HID
152 default !EXPERT
153 ---help---
154 Support for Cherry Cymotion keyboard.
155
156config HID_CHICONY
157 tristate "Chicony Tactical pad" if EXPERT
158 depends on HID
159 default !EXPERT
160 ---help---
161 Support for Chicony Tactical pad.
162
163config HID_PRODIKEYS
164 tristate "Prodikeys PC-MIDI Keyboard support"
165 depends on HID && SND
166 select SND_RAWMIDI
167 ---help---
168 Support for Prodikeys PC-MIDI Keyboard device support.
169 Say Y here to enable support for this device.
170 - Prodikeys PC-MIDI keyboard.
171 The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI
172 input and one MIDI output. These MIDI jacks appear as
173 a sound "card" in the ALSA sound system.
174 Note: if you say N here, this device will still function as a basic
175 multimedia keyboard, but will lack support for the musical keyboard
176 and some additional multimedia keys.
177
178config HID_CP2112
179 tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
180 depends on USB_HID && I2C && GPIOLIB
181 ---help---
182 Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
183 This is a HID device driver which registers as an i2c adapter
184 and gpiochip to expose these functions of the CP2112. The
185 customizable USB descriptor fields are exposed as sysfs attributes.
186
187config HID_CYPRESS
188 tristate "Cypress mouse and barcode readers" if EXPERT
189 depends on HID
190 default !EXPERT
191 ---help---
192 Support for cypress mouse and barcode readers.
193
194config HID_DRAGONRISE
195 tristate "DragonRise Inc. game controller"
196 depends on HID
197 ---help---
198 Say Y here if you have DragonRise Inc. game controllers.
199 These might be branded as:
200 - Tesun USB-703
201 - Media-tech MT1504 "Rogue"
202 - DVTech JS19 "Gear"
203 - Defender Game Master
204
205config DRAGONRISE_FF
206 bool "DragonRise Inc. force feedback"
207 depends on HID_DRAGONRISE
208 select INPUT_FF_MEMLESS
209 ---help---
210 Say Y here if you want to enable force feedback support for DragonRise Inc.
211 game controllers.
212
213config HID_EMS_FF
214 tristate "EMS Production Inc. force feedback support"
215 depends on HID
216 select INPUT_FF_MEMLESS
217 ---help---
218 Say Y here if you want to enable force feedback support for devices by
219 EMS Production Ltd.
220 Currently the following devices are known to be supported:
221 - Trio Linker Plus II
222
223config HID_ELECOM
224 tristate "ELECOM BM084 bluetooth mouse"
225 depends on HID
226 ---help---
227 Support for the ELECOM BM084 (bluetooth mouse).
228
229config HID_ELO
230 tristate "ELO USB 4000/4500 touchscreen"
231 depends on USB_HID
232 ---help---
233 Support for the ELO USB 4000/4500 touchscreens. Note that this is for
234 different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
235
236config HID_EZKEY
237 tristate "Ezkey BTC 8193 keyboard" if EXPERT
238 depends on HID
239 default !EXPERT
240 ---help---
241 Support for Ezkey BTC 8193 keyboard.
242
243config HID_HOLTEK
244 tristate "Holtek HID devices"
245 depends on USB_HID
246 ---help---
247 Support for Holtek based devices:
248 - Holtek On Line Grip based game controller
249 - Trust GXT 18 Gaming Keyboard
250 - Sharkoon Drakonia / Perixx MX-2000 gaming mice
251 - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 /
252 Zalman ZM-GM1
253 - SHARKOON DarkGlider Gaming mouse
254 - LEETGION Hellion Gaming Mouse
255
256config HOLTEK_FF
257 bool "Holtek On Line Grip force feedback support"
258 depends on HID_HOLTEK
259 select INPUT_FF_MEMLESS
260 ---help---
261 Say Y here if you have a Holtek On Line Grip based game controller
262 and want to have force feedback support for it.
263
264config HID_HUION
265 tristate "Huion tablets"
266 depends on USB_HID
267 ---help---
268 Support for Huion 580 tablet.
269
270config HID_KEYTOUCH
271 tristate "Keytouch HID devices"
272 depends on HID
273 ---help---
274 Support for Keytouch HID devices not fully compliant with
275 the specification. Currently supported:
276 - Keytouch IEC 60945
277
278config HID_KYE
279 tristate "KYE/Genius devices"
280 depends on HID
281 ---help---
282 Support for KYE/Genius devices not fully compliant with HID standard:
283 - Ergo Mouse
284 - EasyPen i405X tablet
285 - MousePen i608X tablet
286 - EasyPen M610X tablet
287
288config HID_UCLOGIC
289 tristate "UC-Logic"
290 depends on HID
291 ---help---
292 Support for UC-Logic tablets.
293
294config HID_WALTOP
295 tristate "Waltop"
296 depends on HID
297 ---help---
298 Support for Waltop tablets.
299
300config HID_GYRATION
301 tristate "Gyration remote control"
302 depends on HID
303 ---help---
304 Support for Gyration remote control.
305
306config HID_ICADE
307 tristate "ION iCade arcade controller"
308 depends on HID
309 ---help---
310 Support for the ION iCade arcade controller to work as a joystick.
311
312 To compile this driver as a module, choose M here: the
313 module will be called hid-icade.
314
315config HID_TWINHAN
316 tristate "Twinhan IR remote control"
317 depends on HID
318 ---help---
319 Support for Twinhan IR remote control.
320
321config HID_KENSINGTON
322 tristate "Kensington Slimblade Trackball" if EXPERT
323 depends on HID
324 default !EXPERT
325 ---help---
326 Support for Kensington Slimblade Trackball.
327
328config HID_LCPOWER
329 tristate "LC-Power"
330 depends on HID
331 ---help---
332 Support for LC-Power RC1000MCE RF remote control.
333
334config HID_LENOVO_TPKBD
335 tristate "Lenovo ThinkPad USB Keyboard with TrackPoint"
336 depends on HID
337 select NEW_LEDS
338 select LEDS_CLASS
339 ---help---
340 Support for the Lenovo ThinkPad USB Keyboard with TrackPoint.
341
342 Say Y here if you have a Lenovo ThinkPad USB Keyboard with TrackPoint
343 and would like to use device-specific features like changing the
344 sensitivity of the trackpoint, using the microphone mute button or
345 controlling the mute and microphone mute LEDs.
346
347config HID_LOGITECH
348 tristate "Logitech devices" if EXPERT
349 depends on HID
350 default !EXPERT
351 ---help---
352 Support for Logitech devices that are not fully compliant with HID standard.
353
354config HID_LOGITECH_DJ
355 tristate "Logitech Unifying receivers full support"
356 depends on HIDRAW
357 depends on HID_LOGITECH
358 ---help---
359 Say Y if you want support for Logitech Unifying receivers and devices.
360 Unifying receivers are capable of pairing up to 6 Logitech compliant
361 devices to the same receiver. Without this driver it will be handled by
362 generic USB_HID driver and all incoming events will be multiplexed
363 into a single mouse and a single keyboard device.
364
365config LOGITECH_FF
366 bool "Logitech force feedback support"
367 depends on HID_LOGITECH
368 select INPUT_FF_MEMLESS
369 help
370 Say Y here if you have one of these devices:
371 - Logitech WingMan Cordless RumblePad
372 - Logitech WingMan Cordless RumblePad 2
373 - Logitech WingMan Force 3D
374 - Logitech Formula Force EX
375 - Logitech WingMan Formula Force GP
376
377 and if you want to enable force feedback for them.
378 Note: if you say N here, this device will still be supported, but without
379 force feedback.
380
381config LOGIRUMBLEPAD2_FF
382 bool "Logitech force feedback support (variant 2)"
383 depends on HID_LOGITECH
384 select INPUT_FF_MEMLESS
385 help
386 Say Y here if you want to enable force feedback support for:
387 - Logitech RumblePad
388 - Logitech Rumblepad 2
389 - Logitech Formula Vibration Feedback Wheel
390
391config LOGIG940_FF
392 bool "Logitech Flight System G940 force feedback support"
393 depends on HID_LOGITECH
394 select INPUT_FF_MEMLESS
395 help
396 Say Y here if you want to enable force feedback support for Logitech
397 Flight System G940 devices.
398
399config LOGIWHEELS_FF
400 bool "Logitech wheels configuration and force feedback support"
401 depends on HID_LOGITECH
402 select INPUT_FF_MEMLESS
403 default LOGITECH_FF
404 help
405 Say Y here if you want to enable force feedback and range setting
406 support for following Logitech wheels:
407 - Logitech Driving Force
408 - Logitech Driving Force Pro
409 - Logitech Driving Force GT
410 - Logitech G25
411 - Logitech G27
412 - Logitech MOMO/MOMO 2
413 - Logitech Formula Force EX
414
415config HID_MAGICMOUSE
416 tristate "Apple Magic Mouse/Trackpad multi-touch support"
417 depends on HID
418 ---help---
419 Support for the Apple Magic Mouse/Trackpad multi-touch.
420
421 Say Y here if you want support for the multi-touch features of the
422 Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad.
423
424config HID_MICROSOFT
425 tristate "Microsoft non-fully HID-compliant devices" if EXPERT
426 depends on HID
427 default !EXPERT
428 ---help---
429 Support for Microsoft devices that are not fully compliant with HID standard.
430
431config HID_MONTEREY
432 tristate "Monterey Genius KB29E keyboard" if EXPERT
433 depends on HID
434 default !EXPERT
435 ---help---
436 Support for Monterey Genius KB29E.
437
438config HID_MULTITOUCH
439 tristate "HID Multitouch panels"
440 depends on HID
441 ---help---
442 Generic support for HID multitouch panels.
443
444 Say Y here if you have one of the following devices:
445 - 3M PCT touch screens
446 - ActionStar dual touch panels
447 - Atmel panels
448 - Cando dual touch panels
449 - Chunghwa panels
450 - CVTouch panels
451 - Cypress TrueTouch panels
452 - Elan Microelectronics touch panels
453 - Elo TouchSystems IntelliTouch Plus panels
454 - GeneralTouch 'Sensing Win7-TwoFinger' panels
455 - GoodTouch panels
456 - Hanvon dual touch panels
457 - Ilitek dual touch panels
458 - IrTouch Infrared USB panels
459 - LG Display panels (Dell ST2220Tc)
460 - Lumio CrystalTouch panels
461 - MosArt dual-touch panels
462 - Panasonic multitouch panels
463 - PenMount dual touch panels
464 - Perixx Peripad 701 touchpad
465 - PixArt optical touch screen
466 - Pixcir dual touch panels
467 - Quanta panels
468 - eGalax dual-touch panels, including the Joojoo and Wetab tablets
469 - SiS multitouch panels
470 - Stantum multitouch panels
471 - Touch International Panels
472 - Unitec Panels
473 - Wistron optical touch panels
474 - XAT optical touch panels
475 - Xiroku optical touch panels
476 - Zytronic touch panels
477
478 If unsure, say N.
479
480 To compile this driver as a module, choose M here: the
481 module will be called hid-multitouch.
482
483config HID_NTRIG
484 tristate "N-Trig touch screen"
485 depends on USB_HID
486 ---help---
487 Support for N-Trig touch screen.
488
489config HID_ORTEK
490 tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad"
491 depends on HID
492 ---help---
493 There are certain devices which have LogicalMaximum wrong in the keyboard
494 usage page of their report descriptor. The most prevailing ones so far
495 are manufactured by Ortek, thus the name of the driver. Currently
496 supported devices by this driver are
497
498 - Ortek PKB-1700
499 - Ortek WKB-2000
500 - Skycable wireless presenter
501
502config HID_PANTHERLORD
503 tristate "Pantherlord/GreenAsia game controller"
504 depends on HID
505 ---help---
506 Say Y here if you have a PantherLord/GreenAsia based game controller
507 or adapter.
508
509config PANTHERLORD_FF
510 bool "Pantherlord force feedback support"
511 depends on HID_PANTHERLORD
512 select INPUT_FF_MEMLESS
513 ---help---
514 Say Y here if you have a PantherLord/GreenAsia based game controller
515 or adapter and want to enable force feedback support for it.
516
517config HID_PETALYNX
518 tristate "Petalynx Maxter remote control"
519 depends on HID
520 ---help---
521 Support for Petalynx Maxter remote control.
522
523config HID_PICOLCD
524 tristate "PicoLCD (graphic version)"
525 depends on HID
526 ---help---
527 This provides support for Minibox PicoLCD devices, currently
528 only the graphical ones are supported.
529
530 This includes support for the following device features:
531 - Keypad
532 - Switching between Firmware and Flash mode
533 - EEProm / Flash access (via debugfs)
534 Features selectively enabled:
535 - Framebuffer for monochrome 256x64 display
536 - Backlight control
537 - Contrast control
538 - General purpose outputs
539 Features that are not (yet) supported:
540 - IR
541
542config HID_PICOLCD_FB
543 bool "Framebuffer support" if EXPERT
544 default !EXPERT
545 depends on HID_PICOLCD
546 depends on HID_PICOLCD=FB || FB=y
547 select FB_DEFERRED_IO
548 select FB_SYS_FILLRECT
549 select FB_SYS_COPYAREA
550 select FB_SYS_IMAGEBLIT
551 select FB_SYS_FOPS
552 ---help---
553 Provide access to PicoLCD's 256x64 monochrome display via a
554 framebuffer device.
555
556config HID_PICOLCD_BACKLIGHT
557 bool "Backlight control" if EXPERT
558 default !EXPERT
559 depends on HID_PICOLCD
560 depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y
561 ---help---
562 Provide access to PicoLCD's backlight control via backlight
563 class.
564
565config HID_PICOLCD_LCD
566 bool "Contrast control" if EXPERT
567 default !EXPERT
568 depends on HID_PICOLCD
569 depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y
570 ---help---
571 Provide access to PicoLCD's LCD contrast via lcd class.
572
573config HID_PICOLCD_LEDS
574 bool "GPO via leds class" if EXPERT
575 default !EXPERT
576 depends on HID_PICOLCD
577 depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y
578 ---help---
579 Provide access to PicoLCD's GPO pins via leds class.
580
581config HID_PICOLCD_CIR
582 bool "CIR via RC class" if EXPERT
583 default !EXPERT
584 depends on HID_PICOLCD
585 depends on HID_PICOLCD=RC_CORE || RC_CORE=y
586 ---help---
587 Provide access to PicoLCD's CIR interface via remote control (LIRC).
588
589config HID_PRIMAX
590 tristate "Primax non-fully HID-compliant devices"
591 depends on HID
592 ---help---
593 Support for Primax devices that are not fully compliant with the
594 HID standard.
595
596config HID_ROCCAT
597 tristate "Roccat device support"
598 depends on USB_HID
599 ---help---
600 Support for Roccat devices.
601 Say Y here if you have a Roccat mouse or keyboard and want
602 support for its special functionalities.
603
604config HID_SAITEK
605 tristate "Saitek non-fully HID-compliant devices"
606 depends on HID
607 ---help---
608 Support for Saitek devices that are not fully compliant with the
609 HID standard.
610
611 Currently only supports the PS1000 controller.
612
613config HID_SAMSUNG
614 tristate "Samsung InfraRed remote control or keyboards"
615 depends on HID
616 ---help---
617 Support for Samsung InfraRed remote control or keyboards.
618
619config HID_SONY
620 tristate "Sony PS2/3/4 accessories"
621 depends on USB_HID
622 depends on NEW_LEDS
623 depends on LEDS_CLASS
624 select POWER_SUPPLY
625 ---help---
626 Support for
627
628 * Sony PS3 6-axis controllers
629 * Sony PS4 DualShock 4 controllers
630 * Buzz controllers
631 * Sony PS3 Blue-ray Disk Remote Control (Bluetooth)
632 * Logitech Harmony adapter for Sony Playstation 3 (Bluetooth)
633
634config SONY_FF
635 bool "Sony PS2/3/4 accessories force feedback support"
636 depends on HID_SONY
637 select INPUT_FF_MEMLESS
638 ---help---
639 Say Y here if you have a Sony PS2/3/4 accessory and want to enable
640 force feedback support for it.
641
642config HID_SPEEDLINK
643 tristate "Speedlink VAD Cezanne mouse support"
644 depends on HID
645 ---help---
646 Support for Speedlink Vicious and Divine Cezanne mouse.
647
648config HID_STEELSERIES
649 tristate "Steelseries SRW-S1 steering wheel support"
650 depends on HID
651 ---help---
652 Support for Steelseries SRW-S1 steering wheel
653
654config HID_SUNPLUS
655 tristate "Sunplus wireless desktop"
656 depends on HID
657 ---help---
658 Support for Sunplus wireless desktop.
659
660config HID_GREENASIA
661 tristate "GreenAsia (Product ID 0x12) game controller support"
662 depends on HID
663 ---help---
664 Say Y here if you have a GreenAsia (Product ID 0x12) based game
665 controller or adapter.
666
667config GREENASIA_FF
668 bool "GreenAsia (Product ID 0x12) force feedback support"
669 depends on HID_GREENASIA
670 select INPUT_FF_MEMLESS
671 ---help---
672 Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
673 (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
674 and want to enable force feedback support for it.
675
676config HID_HYPERV_MOUSE
677 tristate "Microsoft Hyper-V mouse driver"
678 depends on HYPERV
679 ---help---
680 Select this option to enable the Hyper-V mouse driver.
681
682config HID_SMARTJOYPLUS
683 tristate "SmartJoy PLUS PS2/USB adapter support"
684 depends on HID
685 ---help---
686 Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box,
687 Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro.
688
689 Note that DDR (Dance Dance Revolution) mode is not supported, nor
690 is pressure sensitive buttons on the pro models.
691
692config SMARTJOYPLUS_FF
693 bool "SmartJoy PLUS PS2/USB adapter force feedback support"
694 depends on HID_SMARTJOYPLUS
695 select INPUT_FF_MEMLESS
696 ---help---
697 Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
698 enable force feedback support for it.
699
700config HID_TIVO
701 tristate "TiVo Slide Bluetooth remote control support"
702 depends on HID
703 ---help---
704 Say Y if you have a TiVo Slide Bluetooth remote control.
705
706config HID_TOPSEED
707 tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support"
708 depends on HID
709 ---help---
710 Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
711 CLLRCMCE remote control.
712
713config HID_THINGM
714 tristate "ThingM blink(1) USB RGB LED"
715 depends on HID
716 depends on LEDS_CLASS
717 ---help---
718 Support for the ThingM blink(1) USB RGB LED. This driver registers a
719 Linux LED class instance, plus additional sysfs attributes to control
720 RGB colors, fade time and playing. The device is exposed through hidraw
721 to access other functions.
722
723config HID_THRUSTMASTER
724 tristate "ThrustMaster devices support"
725 depends on HID
726 ---help---
727 Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
728 a THRUSTMASTER Ferrari GT Rumble Wheel.
729
730config THRUSTMASTER_FF
731 bool "ThrustMaster devices force feedback support"
732 depends on HID_THRUSTMASTER
733 select INPUT_FF_MEMLESS
734 ---help---
735 Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or 3,
736 a THRUSTMASTER Dual Trigger 3-in-1 or a THRUSTMASTER Ferrari GT
737 Rumble Force or Force Feedback Wheel.
738
739config HID_WACOM
740 tristate "Wacom Bluetooth devices support"
741 depends on HID
742 depends on LEDS_CLASS
743 select POWER_SUPPLY
744 ---help---
745 Support for Wacom Graphire Bluetooth and Intuos4 WL tablets.
746
747config HID_WIIMOTE
748 tristate "Nintendo Wii / Wii U peripherals"
749 depends on HID
750 depends on LEDS_CLASS
751 select POWER_SUPPLY
752 select INPUT_FF_MEMLESS
753 ---help---
754 Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported
755 devices are the Wii Remote and its extension devices, but also devices
756 based on the Wii Remote like the Wii U Pro Controller or the
757 Wii Balance Board.
758
759 Support for all official Nintendo extensions is available, however, 3rd
760 party extensions might not be supported. Please report these devices to:
761 http://github.com/dvdhrm/xwiimote/issues
762
763 Other Nintendo Wii U peripherals that are IEEE 802.11 based (including
764 the Wii U Gamepad) might be supported in the future. But currently
765 support is limited to Bluetooth based devices.
766
767 If unsure, say N.
768
769 To compile this driver as a module, choose M here: the
770 module will be called hid-wiimote.
771
772config HID_XINMO
773 tristate "Xin-Mo non-fully compliant devices"
774 depends on HID
775 ---help---
776 Support for Xin-Mo devices that are not fully compliant with the HID
777 standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here
778 if you have a Xin-Mo Dual Arcade controller.
779
780config HID_ZEROPLUS
781 tristate "Zeroplus based game controller support"
782 depends on HID
783 ---help---
784 Say Y here if you have a Zeroplus based game controller.
785
786config ZEROPLUS_FF
787 bool "Zeroplus based game controller force feedback support"
788 depends on HID_ZEROPLUS
789 select INPUT_FF_MEMLESS
790 ---help---
791 Say Y here if you have a Zeroplus based game controller and want
792 to have force feedback support for it.
793
794config HID_ZYDACRON
795 tristate "Zydacron remote control support"
796 depends on HID
797 ---help---
798 Support for Zydacron remote control.
799
800config HID_SENSOR_HUB
801 tristate "HID Sensors framework support"
802 depends on HID
803 select MFD_CORE
804 default n
805 ---help---
806 Support for HID Sensor framework. This creates a MFD instance
807 for a sensor hub and identifies all the sensors connected to it.
808 Each sensor is registered as a MFD cell, so that sensor specific
809 processing can be done in a separate driver. Each sensor
810 drivers can use the service provided by this driver to register
811 for events and handle data streams. Each sensor driver can format
812 data and present to user mode using input or IIO interface.
813
814endmenu
815
816endif # HID
817
818source "drivers/hid/usbhid/Kconfig"
819
820source "drivers/hid/i2c-hid/Kconfig"
821
822endmenu