1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
   4 *
   5 * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
   6 *
 
 
 
 
   7 * Support to set flow control line levels using TIOCMGET and TIOCMSET
   8 * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
   9 * control thanks to Munir Nassar nassarmu@real-time.com
  10 *
  11 */
  12
  13#include <linux/kernel.h>
  14#include <linux/errno.h>
  15#include <linux/slab.h>
  16#include <linux/tty.h>
  17#include <linux/tty_flip.h>
  18#include <linux/module.h>
  19#include <linux/moduleparam.h>
  20#include <linux/usb.h>
  21#include <linux/uaccess.h>
  22#include <linux/usb/serial.h>
  23#include <linux/gpio/driver.h>
  24#include <linux/bitops.h>
  25#include <linux/mutex.h>
  26
  27#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
  28
  29/*
  30 * Function Prototypes
  31 */
  32static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
  33static void cp210x_close(struct usb_serial_port *);
  34static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *);
  35static void cp210x_get_termios_port(struct usb_serial_port *port,
  36	tcflag_t *cflagp, unsigned int *baudp);
  37static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
  38							struct ktermios *);
  39static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
  40							struct ktermios*);
  41static bool cp210x_tx_empty(struct usb_serial_port *port);
  42static int cp210x_tiocmget(struct tty_struct *);
  43static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int);
  44static int cp210x_tiocmset_port(struct usb_serial_port *port,
  45		unsigned int, unsigned int);
  46static void cp210x_break_ctl(struct tty_struct *, int);
  47static int cp210x_attach(struct usb_serial *);
  48static void cp210x_disconnect(struct usb_serial *);
  49static void cp210x_release(struct usb_serial *);
  50static int cp210x_port_probe(struct usb_serial_port *);
  51static int cp210x_port_remove(struct usb_serial_port *);
  52static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
  53static void cp210x_process_read_urb(struct urb *urb);
  54static void cp210x_enable_event_mode(struct usb_serial_port *port);
  55static void cp210x_disable_event_mode(struct usb_serial_port *port);
  56
  57static const struct usb_device_id id_table[] = {
  58	{ USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
  59	{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
  60	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
  61	{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
  62	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
  63	{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
  64	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
  65	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
  66	{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
  67	{ USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */
  68	{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
  69	{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
  70	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
  71	{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
  72	{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
  73	{ USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */
  74	{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
  75	{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
  76	{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
  77	{ USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
  78	{ USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
  79	{ USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
  80	{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
  81	{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
  82	{ USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
  83	{ USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
  84	{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
  85	{ USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
  86	{ USB_DEVICE(0x10C4, 0x8056) }, /* Lorenz Messtechnik devices */
  87	{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
  88	{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
  89	{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
  90	{ USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
  91	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
  92	{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
  93	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
  94	{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
  95	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
  96	{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
  97	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
  98	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
  99	{ USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
 100	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
 101	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
 102	{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
 103	{ USB_DEVICE(0x10C4, 0x817C) }, /* CESINEL MEDCAL N Power Quality Monitor */
 104	{ USB_DEVICE(0x10C4, 0x817D) }, /* CESINEL MEDCAL NT Power Quality Monitor */
 105	{ USB_DEVICE(0x10C4, 0x817E) }, /* CESINEL MEDCAL S Power Quality Monitor */
 106	{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
 107	{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
 108	{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
 109	{ USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */
 110	{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
 111	{ USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
 112	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
 113	{ USB_DEVICE(0x10C4, 0x81D7) }, /* IAI Corp. RCB-CV-USB USB to RS485 Adaptor */
 114	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 115	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
 116	{ USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
 117	{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
 118	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 119	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
 120	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
 121	{ USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
 122	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
 123	{ USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */
 124	{ USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */
 125	{ USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */
 126	{ USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */
 127	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 128	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 129	{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
 130	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
 131	{ USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */
 132	{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
 133	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
 134	{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
 135	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
 136	{ USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
 137	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
 138	{ USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */
 139	{ USB_DEVICE(0x10C4, 0x851E) }, /* CESINEL MEDCAL PT Network Analyzer */
 140	{ USB_DEVICE(0x10C4, 0x85A7) }, /* LifeScan OneTouch Verio IQ */
 141	{ USB_DEVICE(0x10C4, 0x85B8) }, /* CESINEL ReCon T Energy Logger */
 142	{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
 143	{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
 144	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
 145	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
 146	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
 147	{ USB_DEVICE(0x10C4, 0x8856) },	/* CEL EM357 ZigBee USB Stick - LR */
 148	{ USB_DEVICE(0x10C4, 0x8857) },	/* CEL EM357 ZigBee USB Stick */
 149	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 150	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
 151	{ USB_DEVICE(0x10C4, 0x88FB) }, /* CESINEL MEDCAL STII Network Analyzer */
 152	{ USB_DEVICE(0x10C4, 0x8938) }, /* CESINEL MEDCAL S II Network Analyzer */
 153	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
 154	{ USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */
 155	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
 156	{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
 157	{ USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */
 158	{ USB_DEVICE(0x10C4, 0x89FB) }, /* Qivicon ZigBee USB Radio Stick */
 159	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
 160	{ USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */
 161	{ USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */
 162	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 163	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 164	{ USB_DEVICE(0x10C4, 0xEA63) }, /* Silicon Labs Windows Update (CP2101-4/CP2102N) */
 165	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
 
 166	{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
 167	{ USB_DEVICE(0x10C4, 0xEA7A) }, /* Silicon Labs Windows Update (CP2105) */
 168	{ USB_DEVICE(0x10C4, 0xEA7B) }, /* Silicon Labs Windows Update (CP2108) */
 169	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
 170	{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
 171	{ USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
 172	{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
 173	{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
 174	{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
 175	{ USB_DEVICE(0x12B8, 0xEC60) }, /* Link G4 ECU */
 176	{ USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */
 177	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
 178	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
 179	{ USB_DEVICE(0x155A, 0x1006) },	/* ELDAT Easywave RX09 */
 180	{ USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
 181	{ USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
 182	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 183	{ USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
 184	{ USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
 185	{ USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
 186	{ USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
 187	{ USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */
 188	{ USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */
 189	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
 190	{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
 191	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
 192	{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
 193	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
 194	{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
 195	{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
 196	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
 197	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 198	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 199	{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
 200	{ USB_DEVICE(0x18EF, 0xE030) }, /* ELV ALC 8xxx Battery Charger */
 201	{ USB_DEVICE(0x18EF, 0xE032) }, /* ELV TFD500 Data Logger */
 202	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
 203	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
 204	{ USB_DEVICE(0x1901, 0x0194) },	/* GE Healthcare Remote Alarm Box */
 205	{ USB_DEVICE(0x1901, 0x0195) },	/* GE B850/B650/B450 CP2104 DP UART interface */
 206	{ USB_DEVICE(0x1901, 0x0196) },	/* GE B850 CP2105 DP UART interface */
 207	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
 208	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 209	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
 210	{ USB_DEVICE(0x1BA4, 0x0002) },	/* Silicon Labs 358x factory default */
 211	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
 212	{ USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
 213	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
 214	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
 215	{ USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
 216	{ USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
 217	{ USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
 218	{ USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
 219	{ USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
 220	{ USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
 221	{ USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
 222	{ USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
 223	{ USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
 224	{ USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
 225	{ USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
 226	{ USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
 227	{ USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
 228	{ USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
 229	{ USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
 230	{ USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
 231	{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
 232	{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
 233	{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
 234	{ USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
 235	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 236	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
 237	{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
 238	{ USB_DEVICE(0x3923, 0x7A0B) }, /* National Instruments USB Serial Console */
 239	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 240	{ } /* Terminating Entry */
 241};
 242
 243MODULE_DEVICE_TABLE(usb, id_table);
 244
 245struct cp210x_serial_private {
 246#ifdef CONFIG_GPIOLIB
 247	struct gpio_chip	gc;
 248	bool			gpio_registered;
 249	u8			gpio_pushpull;
 250	u8			gpio_altfunc;
 251	u8			gpio_input;
 252#endif
 253	u8			partnum;
 254	speed_t			min_speed;
 255	speed_t			max_speed;
 256	bool			use_actual_rate;
 257};
 258
 259enum cp210x_event_state {
 260	ES_DATA,
 261	ES_ESCAPE,
 262	ES_LSR,
 263	ES_LSR_DATA_0,
 264	ES_LSR_DATA_1,
 265	ES_MSR
 266};
 267
 268struct cp210x_port_private {
 269	u8			bInterfaceNumber;
 270	bool			has_swapped_line_ctl;
 271	bool			event_mode;
 272	enum cp210x_event_state event_state;
 273	u8 lsr;
 274};
 275
 276static struct usb_serial_driver cp210x_device = {
 277	.driver = {
 278		.owner =	THIS_MODULE,
 279		.name =		"cp210x",
 280	},
 281	.id_table		= id_table,
 282	.num_ports		= 1,
 283	.bulk_in_size		= 256,
 284	.bulk_out_size		= 256,
 285	.open			= cp210x_open,
 286	.close			= cp210x_close,
 287	.break_ctl		= cp210x_break_ctl,
 288	.set_termios		= cp210x_set_termios,
 289	.tx_empty		= cp210x_tx_empty,
 290	.throttle		= usb_serial_generic_throttle,
 291	.unthrottle		= usb_serial_generic_unthrottle,
 292	.tiocmget		= cp210x_tiocmget,
 293	.tiocmset		= cp210x_tiocmset,
 294	.get_icount		= usb_serial_generic_get_icount,
 295	.attach			= cp210x_attach,
 296	.disconnect		= cp210x_disconnect,
 297	.release		= cp210x_release,
 298	.port_probe		= cp210x_port_probe,
 299	.port_remove		= cp210x_port_remove,
 300	.dtr_rts		= cp210x_dtr_rts,
 301	.process_read_urb	= cp210x_process_read_urb,
 302};
 303
 304static struct usb_serial_driver * const serial_drivers[] = {
 305	&cp210x_device, NULL
 306};
 307
 308/* Config request types */
 309#define REQTYPE_HOST_TO_INTERFACE	0x41
 310#define REQTYPE_INTERFACE_TO_HOST	0xc1
 311#define REQTYPE_HOST_TO_DEVICE	0x40
 312#define REQTYPE_DEVICE_TO_HOST	0xc0
 313
 314/* Config request codes */
 315#define CP210X_IFC_ENABLE	0x00
 316#define CP210X_SET_BAUDDIV	0x01
 317#define CP210X_GET_BAUDDIV	0x02
 318#define CP210X_SET_LINE_CTL	0x03
 319#define CP210X_GET_LINE_CTL	0x04
 320#define CP210X_SET_BREAK	0x05
 321#define CP210X_IMM_CHAR		0x06
 322#define CP210X_SET_MHS		0x07
 323#define CP210X_GET_MDMSTS	0x08
 324#define CP210X_SET_XON		0x09
 325#define CP210X_SET_XOFF		0x0A
 326#define CP210X_SET_EVENTMASK	0x0B
 327#define CP210X_GET_EVENTMASK	0x0C
 328#define CP210X_SET_CHAR		0x0D
 329#define CP210X_GET_CHARS	0x0E
 330#define CP210X_GET_PROPS	0x0F
 331#define CP210X_GET_COMM_STATUS	0x10
 332#define CP210X_RESET		0x11
 333#define CP210X_PURGE		0x12
 334#define CP210X_SET_FLOW		0x13
 335#define CP210X_GET_FLOW		0x14
 336#define CP210X_EMBED_EVENTS	0x15
 337#define CP210X_GET_EVENTSTATE	0x16
 338#define CP210X_SET_CHARS	0x19
 339#define CP210X_GET_BAUDRATE	0x1D
 340#define CP210X_SET_BAUDRATE	0x1E
 341#define CP210X_VENDOR_SPECIFIC	0xFF
 342
 343/* CP210X_IFC_ENABLE */
 344#define UART_ENABLE		0x0001
 345#define UART_DISABLE		0x0000
 346
 347/* CP210X_(SET|GET)_BAUDDIV */
 348#define BAUD_RATE_GEN_FREQ	0x384000
 349
 350/* CP210X_(SET|GET)_LINE_CTL */
 351#define BITS_DATA_MASK		0X0f00
 352#define BITS_DATA_5		0X0500
 353#define BITS_DATA_6		0X0600
 354#define BITS_DATA_7		0X0700
 355#define BITS_DATA_8		0X0800
 356#define BITS_DATA_9		0X0900
 357
 358#define BITS_PARITY_MASK	0x00f0
 359#define BITS_PARITY_NONE	0x0000
 360#define BITS_PARITY_ODD		0x0010
 361#define BITS_PARITY_EVEN	0x0020
 362#define BITS_PARITY_MARK	0x0030
 363#define BITS_PARITY_SPACE	0x0040
 364
 365#define BITS_STOP_MASK		0x000f
 366#define BITS_STOP_1		0x0000
 367#define BITS_STOP_1_5		0x0001
 368#define BITS_STOP_2		0x0002
 369
 370/* CP210X_SET_BREAK */
 371#define BREAK_ON		0x0001
 372#define BREAK_OFF		0x0000
 373
 374/* CP210X_(SET_MHS|GET_MDMSTS) */
 375#define CONTROL_DTR		0x0001
 376#define CONTROL_RTS		0x0002
 377#define CONTROL_CTS		0x0010
 378#define CONTROL_DSR		0x0020
 379#define CONTROL_RING		0x0040
 380#define CONTROL_DCD		0x0080
 381#define CONTROL_WRITE_DTR	0x0100
 382#define CONTROL_WRITE_RTS	0x0200
 383
 384/* CP210X_VENDOR_SPECIFIC values */
 385#define CP210X_READ_2NCONFIG	0x000E
 386#define CP210X_READ_LATCH	0x00C2
 387#define CP210X_GET_PARTNUM	0x370B
 388#define CP210X_GET_PORTCONFIG	0x370C
 389#define CP210X_GET_DEVICEMODE	0x3711
 390#define CP210X_WRITE_LATCH	0x37E1
 391
 392/* Part number definitions */
 393#define CP210X_PARTNUM_CP2101	0x01
 394#define CP210X_PARTNUM_CP2102	0x02
 395#define CP210X_PARTNUM_CP2103	0x03
 396#define CP210X_PARTNUM_CP2104	0x04
 397#define CP210X_PARTNUM_CP2105	0x05
 398#define CP210X_PARTNUM_CP2108	0x08
 399#define CP210X_PARTNUM_CP2102N_QFN28	0x20
 400#define CP210X_PARTNUM_CP2102N_QFN24	0x21
 401#define CP210X_PARTNUM_CP2102N_QFN20	0x22
 402#define CP210X_PARTNUM_UNKNOWN	0xFF
 403
 404/* CP210X_GET_COMM_STATUS returns these 0x13 bytes */
 405struct cp210x_comm_status {
 406	__le32   ulErrors;
 407	__le32   ulHoldReasons;
 408	__le32   ulAmountInInQueue;
 409	__le32   ulAmountInOutQueue;
 410	u8       bEofReceived;
 411	u8       bWaitForImmediate;
 412	u8       bReserved;
 413} __packed;
 414
 415/*
 416 * CP210X_PURGE - 16 bits passed in wValue of USB request.
 417 * SiLabs app note AN571 gives a strange description of the 4 bits:
 418 * bit 0 or bit 2 clears the transmit queue and 1 or 3 receive.
 419 * writing 1 to all, however, purges cp2108 well enough to avoid the hang.
 420 */
 421#define PURGE_ALL		0x000f
 422
 423/* CP210X_EMBED_EVENTS */
 424#define CP210X_ESCCHAR		0xec
 425
 426#define CP210X_LSR_OVERRUN	BIT(1)
 427#define CP210X_LSR_PARITY	BIT(2)
 428#define CP210X_LSR_FRAME	BIT(3)
 429#define CP210X_LSR_BREAK	BIT(4)
 430
 431
 432/* CP210X_GET_FLOW/CP210X_SET_FLOW read/write these 0x10 bytes */
 433struct cp210x_flow_ctl {
 434	__le32	ulControlHandshake;
 435	__le32	ulFlowReplace;
 436	__le32	ulXonLimit;
 437	__le32	ulXoffLimit;
 438};
 439
 440/* cp210x_flow_ctl::ulControlHandshake */
 441#define CP210X_SERIAL_DTR_MASK		GENMASK(1, 0)
 442#define CP210X_SERIAL_DTR_SHIFT(_mode)	(_mode)
 443#define CP210X_SERIAL_CTS_HANDSHAKE	BIT(3)
 444#define CP210X_SERIAL_DSR_HANDSHAKE	BIT(4)
 445#define CP210X_SERIAL_DCD_HANDSHAKE	BIT(5)
 446#define CP210X_SERIAL_DSR_SENSITIVITY	BIT(6)
 447
 448/* values for cp210x_flow_ctl::ulControlHandshake::CP210X_SERIAL_DTR_MASK */
 449#define CP210X_SERIAL_DTR_INACTIVE	0
 450#define CP210X_SERIAL_DTR_ACTIVE	1
 451#define CP210X_SERIAL_DTR_FLOW_CTL	2
 452
 453/* cp210x_flow_ctl::ulFlowReplace */
 454#define CP210X_SERIAL_AUTO_TRANSMIT	BIT(0)
 455#define CP210X_SERIAL_AUTO_RECEIVE	BIT(1)
 456#define CP210X_SERIAL_ERROR_CHAR	BIT(2)
 457#define CP210X_SERIAL_NULL_STRIPPING	BIT(3)
 458#define CP210X_SERIAL_BREAK_CHAR	BIT(4)
 459#define CP210X_SERIAL_RTS_MASK		GENMASK(7, 6)
 460#define CP210X_SERIAL_RTS_SHIFT(_mode)	(_mode << 6)
 461#define CP210X_SERIAL_XOFF_CONTINUE	BIT(31)
 462
 463/* values for cp210x_flow_ctl::ulFlowReplace::CP210X_SERIAL_RTS_MASK */
 464#define CP210X_SERIAL_RTS_INACTIVE	0
 465#define CP210X_SERIAL_RTS_ACTIVE	1
 466#define CP210X_SERIAL_RTS_FLOW_CTL	2
 467
 468/* CP210X_VENDOR_SPECIFIC, CP210X_GET_DEVICEMODE call reads these 0x2 bytes. */
 469struct cp210x_pin_mode {
 470	u8	eci;
 471	u8	sci;
 472};
 473
 474#define CP210X_PIN_MODE_MODEM		0
 475#define CP210X_PIN_MODE_GPIO		BIT(0)
 476
 477/*
 478 * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xf bytes
 479 * on a CP2105 chip. Structure needs padding due to unused/unspecified bytes.
 480 */
 481struct cp210x_dual_port_config {
 482	__le16	gpio_mode;
 483	u8	__pad0[2];
 484	__le16	reset_state;
 485	u8	__pad1[4];
 486	__le16	suspend_state;
 487	u8	sci_cfg;
 488	u8	eci_cfg;
 489	u8	device_cfg;
 490} __packed;
 491
 492/*
 493 * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xd bytes
 494 * on a CP2104 chip. Structure needs padding due to unused/unspecified bytes.
 495 */
 496struct cp210x_single_port_config {
 497	__le16	gpio_mode;
 498	u8	__pad0[2];
 499	__le16	reset_state;
 500	u8	__pad1[4];
 501	__le16	suspend_state;
 502	u8	device_cfg;
 503} __packed;
 504
 505/* GPIO modes */
 506#define CP210X_SCI_GPIO_MODE_OFFSET	9
 507#define CP210X_SCI_GPIO_MODE_MASK	GENMASK(11, 9)
 508
 509#define CP210X_ECI_GPIO_MODE_OFFSET	2
 510#define CP210X_ECI_GPIO_MODE_MASK	GENMASK(3, 2)
 511
 512#define CP210X_GPIO_MODE_OFFSET		8
 513#define CP210X_GPIO_MODE_MASK		GENMASK(11, 8)
 514
 515/* CP2105 port configuration values */
 516#define CP2105_GPIO0_TXLED_MODE		BIT(0)
 517#define CP2105_GPIO1_RXLED_MODE		BIT(1)
 518#define CP2105_GPIO1_RS485_MODE		BIT(2)
 519
 520/* CP2104 port configuration values */
 521#define CP2104_GPIO0_TXLED_MODE		BIT(0)
 522#define CP2104_GPIO1_RXLED_MODE		BIT(1)
 523#define CP2104_GPIO2_RS485_MODE		BIT(2)
 524
 525/* CP2102N configuration array indices */
 526#define CP210X_2NCONFIG_CONFIG_VERSION_IDX	2
 527#define CP210X_2NCONFIG_GPIO_MODE_IDX		581
 528#define CP210X_2NCONFIG_GPIO_RSTLATCH_IDX	587
 529#define CP210X_2NCONFIG_GPIO_CONTROL_IDX	600
 530
 531/* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */
 532struct cp210x_gpio_write {
 533	u8	mask;
 534	u8	state;
 535};
 536
 537/*
 538 * Helper to get interface number when we only have struct usb_serial.
 539 */
 540static u8 cp210x_interface_num(struct usb_serial *serial)
 541{
 542	struct usb_host_interface *cur_altsetting;
 543
 544	cur_altsetting = serial->interface->cur_altsetting;
 545
 546	return cur_altsetting->desc.bInterfaceNumber;
 547}
 548
 549/*
 550 * Reads a variable-sized block of CP210X_ registers, identified by req.
 551 * Returns data into buf in native USB byte order.
 
 
 
 552 */
 553static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
 554		void *buf, int bufsize)
 555{
 556	struct usb_serial *serial = port->serial;
 557	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 558	void *dmabuf;
 559	int result;
 
 
 
 560
 561	dmabuf = kmalloc(bufsize, GFP_KERNEL);
 562	if (!dmabuf) {
 563		/*
 564		 * FIXME Some callers don't bother to check for error,
 565		 * at least give them consistent junk until they are fixed
 566		 */
 567		memset(buf, 0, bufsize);
 568		return -ENOMEM;
 569	}
 570
 
 571	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 572			req, REQTYPE_INTERFACE_TO_HOST, 0,
 573			port_priv->bInterfaceNumber, dmabuf, bufsize,
 574			USB_CTRL_SET_TIMEOUT);
 575	if (result == bufsize) {
 576		memcpy(buf, dmabuf, bufsize);
 577		result = 0;
 578	} else {
 579		dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n",
 580				req, bufsize, result);
 581		if (result >= 0)
 582			result = -EIO;
 583
 584		/*
 585		 * FIXME Some callers don't bother to check for error,
 586		 * at least give them consistent junk until they are fixed
 587		 */
 588		memset(buf, 0, bufsize);
 589	}
 590
 591	kfree(dmabuf);
 592
 593	return result;
 594}
 595
 596/*
 597 * Reads any 32-bit CP210X_ register identified by req.
 598 */
 599static int cp210x_read_u32_reg(struct usb_serial_port *port, u8 req, u32 *val)
 600{
 601	__le32 le32_val;
 602	int err;
 603
 604	err = cp210x_read_reg_block(port, req, &le32_val, sizeof(le32_val));
 605	if (err) {
 606		/*
 607		 * FIXME Some callers don't bother to check for error,
 608		 * at least give them consistent junk until they are fixed
 609		 */
 610		*val = 0;
 611		return err;
 612	}
 613
 614	*val = le32_to_cpu(le32_val);
 615
 616	return 0;
 617}
 618
 619/*
 620 * Reads any 16-bit CP210X_ register identified by req.
 621 */
 622static int cp210x_read_u16_reg(struct usb_serial_port *port, u8 req, u16 *val)
 623{
 624	__le16 le16_val;
 625	int err;
 626
 627	err = cp210x_read_reg_block(port, req, &le16_val, sizeof(le16_val));
 628	if (err)
 629		return err;
 630
 631	*val = le16_to_cpu(le16_val);
 632
 633	return 0;
 634}
 635
 636/*
 637 * Reads any 8-bit CP210X_ register identified by req.
 638 */
 639static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val)
 640{
 641	return cp210x_read_reg_block(port, req, val, sizeof(*val));
 642}
 643
 644/*
 645 * Reads a variable-sized vendor block of CP210X_ registers, identified by val.
 646 * Returns data into buf in native USB byte order.
 647 */
 648static int cp210x_read_vendor_block(struct usb_serial *serial, u8 type, u16 val,
 649				    void *buf, int bufsize)
 650{
 651	void *dmabuf;
 652	int result;
 653
 654	dmabuf = kmalloc(bufsize, GFP_KERNEL);
 655	if (!dmabuf)
 656		return -ENOMEM;
 657
 658	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 659				 CP210X_VENDOR_SPECIFIC, type, val,
 660				 cp210x_interface_num(serial), dmabuf, bufsize,
 661				 USB_CTRL_GET_TIMEOUT);
 662	if (result == bufsize) {
 663		memcpy(buf, dmabuf, bufsize);
 664		result = 0;
 665	} else {
 666		dev_err(&serial->interface->dev,
 667			"failed to get vendor val 0x%04x size %d: %d\n", val,
 668			bufsize, result);
 669		if (result >= 0)
 670			result = -EIO;
 671	}
 672
 673	kfree(dmabuf);
 674
 675	return result;
 676}
 677
 678/*
 679 * Writes any 16-bit CP210X_ register (req) whose value is passed
 680 * entirely in the wValue field of the USB request.
 681 */
 682static int cp210x_write_u16_reg(struct usb_serial_port *port, u8 req, u16 val)
 
 683{
 684	struct usb_serial *serial = port->serial;
 685	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 686	int result;
 687
 688	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 689			req, REQTYPE_HOST_TO_INTERFACE, val,
 690			port_priv->bInterfaceNumber, NULL, 0,
 691			USB_CTRL_SET_TIMEOUT);
 692	if (result < 0) {
 693		dev_err(&port->dev, "failed set request 0x%x status: %d\n",
 694				req, result);
 695	}
 696
 697	return result;
 698}
 699
 700/*
 701 * Writes a variable-sized block of CP210X_ registers, identified by req.
 702 * Data in buf must be in native USB byte order.
 703 */
 704static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req,
 705		void *buf, int bufsize)
 706{
 707	struct usb_serial *serial = port->serial;
 708	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 709	void *dmabuf;
 710	int result;
 711
 712	dmabuf = kmemdup(buf, bufsize, GFP_KERNEL);
 713	if (!dmabuf)
 714		return -ENOMEM;
 715
 716	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 717			req, REQTYPE_HOST_TO_INTERFACE, 0,
 718			port_priv->bInterfaceNumber, dmabuf, bufsize,
 719			USB_CTRL_SET_TIMEOUT);
 720
 721	kfree(dmabuf);
 722
 723	if (result == bufsize) {
 724		result = 0;
 
 
 
 
 725	} else {
 726		dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n",
 727				req, bufsize, result);
 728		if (result >= 0)
 729			result = -EIO;
 
 730	}
 731
 732	return result;
 733}
 734
 735/*
 736 * Writes any 32-bit CP210X_ register identified by req.
 737 */
 738static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val)
 739{
 740	__le32 le32_val;
 741
 742	le32_val = cpu_to_le32(val);
 743
 744	return cp210x_write_reg_block(port, req, &le32_val, sizeof(le32_val));
 745}
 746
 747#ifdef CONFIG_GPIOLIB
 748/*
 749 * Writes a variable-sized vendor block of CP210X_ registers, identified by val.
 750 * Data in buf must be in native USB byte order.
 751 */
 752static int cp210x_write_vendor_block(struct usb_serial *serial, u8 type,
 753				     u16 val, void *buf, int bufsize)
 754{
 755	void *dmabuf;
 756	int result;
 757
 758	dmabuf = kmemdup(buf, bufsize, GFP_KERNEL);
 759	if (!dmabuf)
 760		return -ENOMEM;
 761
 762	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 763				 CP210X_VENDOR_SPECIFIC, type, val,
 764				 cp210x_interface_num(serial), dmabuf, bufsize,
 765				 USB_CTRL_SET_TIMEOUT);
 766
 767	kfree(dmabuf);
 768
 769	if (result == bufsize) {
 770		result = 0;
 771	} else {
 772		dev_err(&serial->interface->dev,
 773			"failed to set vendor val 0x%04x size %d: %d\n", val,
 774			bufsize, result);
 775		if (result >= 0)
 776			result = -EIO;
 777	}
 778
 779	return result;
 780}
 781#endif
 782
 783/*
 784 * Detect CP2108 GET_LINE_CTL bug and activate workaround.
 785 * Write a known good value 0x800, read it back.
 786 * If it comes back swapped the bug is detected.
 787 * Preserve the original register value.
 788 */
 789static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port)
 
 790{
 791	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 792	u16 line_ctl_save;
 793	u16 line_ctl_test;
 794	int err;
 795
 796	err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_save);
 797	if (err)
 798		return err;
 799
 800	err = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, 0x800);
 801	if (err)
 802		return err;
 803
 804	err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_test);
 805	if (err)
 806		return err;
 807
 808	if (line_ctl_test == 8) {
 809		port_priv->has_swapped_line_ctl = true;
 810		line_ctl_save = swab16(line_ctl_save);
 811	}
 812
 813	return cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, line_ctl_save);
 814}
 815
 816/*
 817 * Must always be called instead of cp210x_read_u16_reg(CP210X_GET_LINE_CTL)
 818 * to workaround cp2108 bug and get correct value.
 819 */
 820static int cp210x_get_line_ctl(struct usb_serial_port *port, u16 *ctl)
 821{
 822	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 823	int err;
 824
 825	err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, ctl);
 826	if (err)
 827		return err;
 828
 829	/* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */
 830	if (port_priv->has_swapped_line_ctl)
 831		*ctl = swab16(*ctl);
 832
 833	return 0;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 834}
 835
 836static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 837{
 838	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 839	int result;
 840
 841	result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE);
 
 842	if (result) {
 843		dev_err(&port->dev, "%s - Unable to enable UART\n", __func__);
 844		return result;
 845	}
 846
 847	/* Configure the termios structure */
 848	cp210x_get_termios(tty, port);
 849
 850	if (tty) {
 851		/* The baud rate must be initialised on cp2104 */
 852		cp210x_change_speed(tty, port, NULL);
 853
 854		if (I_INPCK(tty))
 855			cp210x_enable_event_mode(port);
 856	}
 857
 858	result = usb_serial_generic_open(tty, port);
 859	if (result)
 860		goto err_disable;
 861
 862	return 0;
 863
 864err_disable:
 865	cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
 866	port_priv->event_mode = false;
 867
 868	return result;
 869}
 870
 871static void cp210x_close(struct usb_serial_port *port)
 872{
 873	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 874
 875	usb_serial_generic_close(port);
 876
 877	/* Clear both queues; cp2108 needs this to avoid an occasional hang */
 878	cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL);
 879
 880	cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
 881
 882	/* Disabling the interface disables event-insertion mode. */
 883	port_priv->event_mode = false;
 884}
 885
 886static void cp210x_process_lsr(struct usb_serial_port *port, unsigned char lsr, char *flag)
 887{
 888	if (lsr & CP210X_LSR_BREAK) {
 889		port->icount.brk++;
 890		*flag = TTY_BREAK;
 891	} else if (lsr & CP210X_LSR_PARITY) {
 892		port->icount.parity++;
 893		*flag = TTY_PARITY;
 894	} else if (lsr & CP210X_LSR_FRAME) {
 895		port->icount.frame++;
 896		*flag = TTY_FRAME;
 897	}
 898
 899	if (lsr & CP210X_LSR_OVERRUN) {
 900		port->icount.overrun++;
 901		tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
 902	}
 903}
 904
 905static bool cp210x_process_char(struct usb_serial_port *port, unsigned char *ch, char *flag)
 906{
 907	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 908
 909	switch (port_priv->event_state) {
 910	case ES_DATA:
 911		if (*ch == CP210X_ESCCHAR) {
 912			port_priv->event_state = ES_ESCAPE;
 913			break;
 914		}
 915		return false;
 916	case ES_ESCAPE:
 917		switch (*ch) {
 918		case 0:
 919			dev_dbg(&port->dev, "%s - escape char\n", __func__);
 920			*ch = CP210X_ESCCHAR;
 921			port_priv->event_state = ES_DATA;
 922			return false;
 923		case 1:
 924			port_priv->event_state = ES_LSR_DATA_0;
 925			break;
 926		case 2:
 927			port_priv->event_state = ES_LSR;
 928			break;
 929		case 3:
 930			port_priv->event_state = ES_MSR;
 931			break;
 932		default:
 933			dev_err(&port->dev, "malformed event 0x%02x\n", *ch);
 934			port_priv->event_state = ES_DATA;
 935			break;
 936		}
 937		break;
 938	case ES_LSR_DATA_0:
 939		port_priv->lsr = *ch;
 940		port_priv->event_state = ES_LSR_DATA_1;
 941		break;
 942	case ES_LSR_DATA_1:
 943		dev_dbg(&port->dev, "%s - lsr = 0x%02x, data = 0x%02x\n",
 944				__func__, port_priv->lsr, *ch);
 945		cp210x_process_lsr(port, port_priv->lsr, flag);
 946		port_priv->event_state = ES_DATA;
 947		return false;
 948	case ES_LSR:
 949		dev_dbg(&port->dev, "%s - lsr = 0x%02x\n", __func__, *ch);
 950		port_priv->lsr = *ch;
 951		cp210x_process_lsr(port, port_priv->lsr, flag);
 952		port_priv->event_state = ES_DATA;
 953		break;
 954	case ES_MSR:
 955		dev_dbg(&port->dev, "%s - msr = 0x%02x\n", __func__, *ch);
 956		/* unimplemented */
 957		port_priv->event_state = ES_DATA;
 958		break;
 959	}
 960
 961	return true;
 962}
 963
 964static void cp210x_process_read_urb(struct urb *urb)
 965{
 966	struct usb_serial_port *port = urb->context;
 967	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 968	unsigned char *ch = urb->transfer_buffer;
 969	char flag;
 970	int i;
 971
 972	if (!urb->actual_length)
 973		return;
 974
 975	if (port_priv->event_mode) {
 976		for (i = 0; i < urb->actual_length; i++, ch++) {
 977			flag = TTY_NORMAL;
 978
 979			if (cp210x_process_char(port, ch, &flag))
 980				continue;
 981
 982			tty_insert_flip_char(&port->port, *ch, flag);
 983		}
 984	} else {
 985		tty_insert_flip_string(&port->port, ch, urb->actual_length);
 986	}
 987	tty_flip_buffer_push(&port->port);
 988}
 989
 990/*
 991 * Read how many bytes are waiting in the TX queue.
 992 */
 993static int cp210x_get_tx_queue_byte_count(struct usb_serial_port *port,
 994		u32 *count)
 995{
 996	struct usb_serial *serial = port->serial;
 997	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 998	struct cp210x_comm_status *sts;
 999	int result;
1000
1001	sts = kmalloc(sizeof(*sts), GFP_KERNEL);
1002	if (!sts)
1003		return -ENOMEM;
1004
1005	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
1006			CP210X_GET_COMM_STATUS, REQTYPE_INTERFACE_TO_HOST,
1007			0, port_priv->bInterfaceNumber, sts, sizeof(*sts),
1008			USB_CTRL_GET_TIMEOUT);
1009	if (result == sizeof(*sts)) {
1010		*count = le32_to_cpu(sts->ulAmountInOutQueue);
1011		result = 0;
1012	} else {
1013		dev_err(&port->dev, "failed to get comm status: %d\n", result);
1014		if (result >= 0)
1015			result = -EIO;
1016	}
1017
1018	kfree(sts);
1019
1020	return result;
1021}
1022
1023static bool cp210x_tx_empty(struct usb_serial_port *port)
1024{
1025	int err;
1026	u32 count;
1027
1028	err = cp210x_get_tx_queue_byte_count(port, &count);
1029	if (err)
1030		return true;
1031
1032	return !count;
1033}
1034
1035/*
1036 * cp210x_get_termios
1037 * Reads the baud rate, data bits, parity, stop bits and flow control mode
1038 * from the device, corrects any unsupported values, and configures the
1039 * termios structure to reflect the state of the device
1040 */
1041static void cp210x_get_termios(struct tty_struct *tty,
1042	struct usb_serial_port *port)
1043{
1044	unsigned int baud;
1045
1046	if (tty) {
1047		cp210x_get_termios_port(tty->driver_data,
1048			&tty->termios.c_cflag, &baud);
1049		tty_encode_baud_rate(tty, baud, baud);
1050	} else {
1051		tcflag_t cflag;
1052		cflag = 0;
1053		cp210x_get_termios_port(port, &cflag, &baud);
1054	}
1055}
1056
1057/*
1058 * cp210x_get_termios_port
1059 * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
1060 */
1061static void cp210x_get_termios_port(struct usb_serial_port *port,
1062	tcflag_t *cflagp, unsigned int *baudp)
1063{
1064	struct device *dev = &port->dev;
1065	tcflag_t cflag;
1066	struct cp210x_flow_ctl flow_ctl;
1067	u32 baud;
1068	u16 bits;
1069	u32 ctl_hs;
1070	u32 flow_repl;
1071
1072	cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
1073
1074	dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
1075	*baudp = baud;
1076
1077	cflag = *cflagp;
1078
1079	cp210x_get_line_ctl(port, &bits);
1080	cflag &= ~CSIZE;
1081	switch (bits & BITS_DATA_MASK) {
1082	case BITS_DATA_5:
1083		dev_dbg(dev, "%s - data bits = 5\n", __func__);
1084		cflag |= CS5;
1085		break;
1086	case BITS_DATA_6:
1087		dev_dbg(dev, "%s - data bits = 6\n", __func__);
1088		cflag |= CS6;
1089		break;
1090	case BITS_DATA_7:
1091		dev_dbg(dev, "%s - data bits = 7\n", __func__);
1092		cflag |= CS7;
1093		break;
1094	case BITS_DATA_8:
1095		dev_dbg(dev, "%s - data bits = 8\n", __func__);
1096		cflag |= CS8;
1097		break;
1098	case BITS_DATA_9:
1099		dev_dbg(dev, "%s - data bits = 9 (not supported, using 8 data bits)\n", __func__);
1100		cflag |= CS8;
1101		bits &= ~BITS_DATA_MASK;
1102		bits |= BITS_DATA_8;
1103		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
1104		break;
1105	default:
1106		dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__);
1107		cflag |= CS8;
1108		bits &= ~BITS_DATA_MASK;
1109		bits |= BITS_DATA_8;
1110		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
1111		break;
1112	}
1113
1114	switch (bits & BITS_PARITY_MASK) {
1115	case BITS_PARITY_NONE:
1116		dev_dbg(dev, "%s - parity = NONE\n", __func__);
1117		cflag &= ~PARENB;
1118		break;
1119	case BITS_PARITY_ODD:
1120		dev_dbg(dev, "%s - parity = ODD\n", __func__);
1121		cflag |= (PARENB|PARODD);
1122		break;
1123	case BITS_PARITY_EVEN:
1124		dev_dbg(dev, "%s - parity = EVEN\n", __func__);
1125		cflag &= ~PARODD;
1126		cflag |= PARENB;
1127		break;
1128	case BITS_PARITY_MARK:
1129		dev_dbg(dev, "%s - parity = MARK\n", __func__);
1130		cflag |= (PARENB|PARODD|CMSPAR);
1131		break;
1132	case BITS_PARITY_SPACE:
1133		dev_dbg(dev, "%s - parity = SPACE\n", __func__);
1134		cflag &= ~PARODD;
1135		cflag |= (PARENB|CMSPAR);
1136		break;
1137	default:
1138		dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__);
1139		cflag &= ~PARENB;
1140		bits &= ~BITS_PARITY_MASK;
1141		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
1142		break;
1143	}
1144
1145	cflag &= ~CSTOPB;
1146	switch (bits & BITS_STOP_MASK) {
1147	case BITS_STOP_1:
1148		dev_dbg(dev, "%s - stop bits = 1\n", __func__);
1149		break;
1150	case BITS_STOP_1_5:
1151		dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__);
1152		bits &= ~BITS_STOP_MASK;
1153		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
1154		break;
1155	case BITS_STOP_2:
1156		dev_dbg(dev, "%s - stop bits = 2\n", __func__);
1157		cflag |= CSTOPB;
1158		break;
1159	default:
1160		dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__);
1161		bits &= ~BITS_STOP_MASK;
1162		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
1163		break;
1164	}
1165
1166	cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
1167			sizeof(flow_ctl));
1168	ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
1169	if (ctl_hs & CP210X_SERIAL_CTS_HANDSHAKE) {
1170		dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
1171		/*
1172		 * When the port is closed, the CP210x hardware disables
1173		 * auto-RTS and RTS is deasserted but it leaves auto-CTS when
1174		 * in hardware flow control mode. When re-opening the port, if
1175		 * auto-CTS is enabled on the cp210x, then auto-RTS must be
1176		 * re-enabled in the driver.
1177		 */
1178		flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
1179		flow_repl &= ~CP210X_SERIAL_RTS_MASK;
1180		flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL);
1181		flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
1182		cp210x_write_reg_block(port,
1183				CP210X_SET_FLOW,
1184				&flow_ctl,
1185				sizeof(flow_ctl));
1186
1187		cflag |= CRTSCTS;
1188	} else {
1189		dev_dbg(dev, "%s - flow control = NONE\n", __func__);
1190		cflag &= ~CRTSCTS;
1191	}
1192
1193	*cflagp = cflag;
1194}
1195
1196struct cp210x_rate {
1197	speed_t rate;
1198	speed_t high;
1199};
1200
1201static const struct cp210x_rate cp210x_an205_table1[] = {
1202	{ 300, 300 },
1203	{ 600, 600 },
1204	{ 1200, 1200 },
1205	{ 1800, 1800 },
1206	{ 2400, 2400 },
1207	{ 4000, 4000 },
1208	{ 4800, 4803 },
1209	{ 7200, 7207 },
1210	{ 9600, 9612 },
1211	{ 14400, 14428 },
1212	{ 16000, 16062 },
1213	{ 19200, 19250 },
1214	{ 28800, 28912 },
1215	{ 38400, 38601 },
1216	{ 51200, 51558 },
1217	{ 56000, 56280 },
1218	{ 57600, 58053 },
1219	{ 64000, 64111 },
1220	{ 76800, 77608 },
1221	{ 115200, 117028 },
1222	{ 128000, 129347 },
1223	{ 153600, 156868 },
1224	{ 230400, 237832 },
1225	{ 250000, 254234 },
1226	{ 256000, 273066 },
1227	{ 460800, 491520 },
1228	{ 500000, 567138 },
1229	{ 576000, 670254 },
1230	{ 921600, UINT_MAX }
1231};
1232
1233/*
1234 * Quantises the baud rate as per AN205 Table 1
1235 */
1236static speed_t cp210x_get_an205_rate(speed_t baud)
1237{
1238	int i;
1239
1240	for (i = 0; i < ARRAY_SIZE(cp210x_an205_table1); ++i) {
1241		if (baud <= cp210x_an205_table1[i].high)
1242			break;
1243	}
1244
1245	return cp210x_an205_table1[i].rate;
1246}
1247
1248static speed_t cp210x_get_actual_rate(speed_t baud)
1249{
1250	unsigned int prescale = 1;
1251	unsigned int div;
1252
1253	if (baud <= 365)
1254		prescale = 4;
1255
1256	div = DIV_ROUND_CLOSEST(48000000, 2 * prescale * baud);
1257	baud = 48000000 / (2 * prescale * div);
1258
1259	return baud;
1260}
1261
1262/*
1263 * CP2101 supports the following baud rates:
1264 *
1265 *	300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800,
1266 *	38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600
1267 *
1268 * CP2102 and CP2103 support the following additional rates:
1269 *
1270 *	4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000,
1271 *	576000
1272 *
1273 * The device will map a requested rate to a supported one, but the result
1274 * of requests for rates greater than 1053257 is undefined (see AN205).
1275 *
1276 * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud,
1277 * respectively, with an error less than 1%. The actual rates are determined
1278 * by
1279 *
1280 *	div = round(freq / (2 x prescale x request))
1281 *	actual = freq / (2 x prescale x div)
1282 *
1283 * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps
1284 * or 1 otherwise.
1285 * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1
1286 * otherwise.
1287 */
1288static void cp210x_change_speed(struct tty_struct *tty,
1289		struct usb_serial_port *port, struct ktermios *old_termios)
1290{
1291	struct usb_serial *serial = port->serial;
1292	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1293	u32 baud;
1294
1295	/*
1296	 * This maps the requested rate to the actual rate, a valid rate on
1297	 * cp2102 or cp2103, or to an arbitrary rate in [1M, max_speed].
 
1298	 *
1299	 * NOTE: B0 is not implemented.
1300	 */
1301	baud = clamp(tty->termios.c_ospeed, priv->min_speed, priv->max_speed);
1302
1303	if (priv->use_actual_rate)
1304		baud = cp210x_get_actual_rate(baud);
1305	else if (baud < 1000000)
1306		baud = cp210x_get_an205_rate(baud);
1307
1308	dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
1309	if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
 
1310		dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
1311		if (old_termios)
1312			baud = old_termios->c_ospeed;
1313		else
1314			baud = 9600;
1315	}
1316
1317	tty_encode_baud_rate(tty, baud, baud);
1318}
1319
1320static void cp210x_enable_event_mode(struct usb_serial_port *port)
1321{
1322	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
1323	int ret;
1324
1325	if (port_priv->event_mode)
1326		return;
1327
1328	port_priv->event_state = ES_DATA;
1329	port_priv->event_mode = true;
1330
1331	ret = cp210x_write_u16_reg(port, CP210X_EMBED_EVENTS, CP210X_ESCCHAR);
1332	if (ret) {
1333		dev_err(&port->dev, "failed to enable events: %d\n", ret);
1334		port_priv->event_mode = false;
1335	}
1336}
1337
1338static void cp210x_disable_event_mode(struct usb_serial_port *port)
1339{
1340	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
1341	int ret;
1342
1343	if (!port_priv->event_mode)
1344		return;
1345
1346	ret = cp210x_write_u16_reg(port, CP210X_EMBED_EVENTS, 0);
1347	if (ret) {
1348		dev_err(&port->dev, "failed to disable events: %d\n", ret);
1349		return;
1350	}
1351
1352	port_priv->event_mode = false;
1353}
1354
1355static void cp210x_set_termios(struct tty_struct *tty,
1356		struct usb_serial_port *port, struct ktermios *old_termios)
1357{
1358	struct device *dev = &port->dev;
1359	unsigned int cflag, old_cflag;
1360	u16 bits;
 
1361
1362	cflag = tty->termios.c_cflag;
1363	old_cflag = old_termios->c_cflag;
1364
1365	if (tty->termios.c_ospeed != old_termios->c_ospeed)
1366		cp210x_change_speed(tty, port, old_termios);
1367
1368	/* If the number of data bits is to be updated */
1369	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
1370		cp210x_get_line_ctl(port, &bits);
1371		bits &= ~BITS_DATA_MASK;
1372		switch (cflag & CSIZE) {
1373		case CS5:
1374			bits |= BITS_DATA_5;
1375			dev_dbg(dev, "%s - data bits = 5\n", __func__);
1376			break;
1377		case CS6:
1378			bits |= BITS_DATA_6;
1379			dev_dbg(dev, "%s - data bits = 6\n", __func__);
1380			break;
1381		case CS7:
1382			bits |= BITS_DATA_7;
1383			dev_dbg(dev, "%s - data bits = 7\n", __func__);
1384			break;
1385		case CS8:
1386		default:
1387			bits |= BITS_DATA_8;
1388			dev_dbg(dev, "%s - data bits = 8\n", __func__);
1389			break;
 
 
 
 
 
 
 
 
1390		}
1391		if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
1392			dev_dbg(dev, "Number of data bits requested not supported by device\n");
1393	}
1394
1395	if ((cflag     & (PARENB|PARODD|CMSPAR)) !=
1396	    (old_cflag & (PARENB|PARODD|CMSPAR))) {
1397		cp210x_get_line_ctl(port, &bits);
1398		bits &= ~BITS_PARITY_MASK;
1399		if (cflag & PARENB) {
1400			if (cflag & CMSPAR) {
1401				if (cflag & PARODD) {
1402					bits |= BITS_PARITY_MARK;
1403					dev_dbg(dev, "%s - parity = MARK\n", __func__);
1404				} else {
1405					bits |= BITS_PARITY_SPACE;
1406					dev_dbg(dev, "%s - parity = SPACE\n", __func__);
1407				}
1408			} else {
1409				if (cflag & PARODD) {
1410					bits |= BITS_PARITY_ODD;
1411					dev_dbg(dev, "%s - parity = ODD\n", __func__);
1412				} else {
1413					bits |= BITS_PARITY_EVEN;
1414					dev_dbg(dev, "%s - parity = EVEN\n", __func__);
1415				}
1416			}
1417		}
1418		if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
1419			dev_dbg(dev, "Parity mode not supported by device\n");
1420	}
1421
1422	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
1423		cp210x_get_line_ctl(port, &bits);
1424		bits &= ~BITS_STOP_MASK;
1425		if (cflag & CSTOPB) {
1426			bits |= BITS_STOP_2;
1427			dev_dbg(dev, "%s - stop bits = 2\n", __func__);
1428		} else {
1429			bits |= BITS_STOP_1;
1430			dev_dbg(dev, "%s - stop bits = 1\n", __func__);
1431		}
1432		if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
1433			dev_dbg(dev, "Number of stop bits requested not supported by device\n");
1434	}
1435
1436	if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
1437		struct cp210x_flow_ctl flow_ctl;
1438		u32 ctl_hs;
1439		u32 flow_repl;
1440
1441		cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
1442				sizeof(flow_ctl));
1443		ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
1444		flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
1445		dev_dbg(dev, "%s - read ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
1446				__func__, ctl_hs, flow_repl);
1447
1448		ctl_hs &= ~CP210X_SERIAL_DSR_HANDSHAKE;
1449		ctl_hs &= ~CP210X_SERIAL_DCD_HANDSHAKE;
1450		ctl_hs &= ~CP210X_SERIAL_DSR_SENSITIVITY;
1451		ctl_hs &= ~CP210X_SERIAL_DTR_MASK;
1452		ctl_hs |= CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_ACTIVE);
1453		if (cflag & CRTSCTS) {
1454			ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE;
1455
1456			flow_repl &= ~CP210X_SERIAL_RTS_MASK;
1457			flow_repl |= CP210X_SERIAL_RTS_SHIFT(
1458					CP210X_SERIAL_RTS_FLOW_CTL);
 
1459			dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
1460		} else {
1461			ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE;
1462
1463			flow_repl &= ~CP210X_SERIAL_RTS_MASK;
1464			flow_repl |= CP210X_SERIAL_RTS_SHIFT(
1465					CP210X_SERIAL_RTS_ACTIVE);
1466			dev_dbg(dev, "%s - flow control = NONE\n", __func__);
1467		}
1468
1469		dev_dbg(dev, "%s - write ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
1470				__func__, ctl_hs, flow_repl);
1471		flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs);
1472		flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
1473		cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
1474				sizeof(flow_ctl));
1475	}
1476
1477	/*
1478	 * Enable event-insertion mode only if input parity checking is
1479	 * enabled for now.
1480	 */
1481	if (I_INPCK(tty))
1482		cp210x_enable_event_mode(port);
1483	else
1484		cp210x_disable_event_mode(port);
1485}
1486
1487static int cp210x_tiocmset(struct tty_struct *tty,
1488		unsigned int set, unsigned int clear)
1489{
1490	struct usb_serial_port *port = tty->driver_data;
1491	return cp210x_tiocmset_port(port, set, clear);
1492}
1493
1494static int cp210x_tiocmset_port(struct usb_serial_port *port,
1495		unsigned int set, unsigned int clear)
1496{
1497	u16 control = 0;
1498
1499	if (set & TIOCM_RTS) {
1500		control |= CONTROL_RTS;
1501		control |= CONTROL_WRITE_RTS;
1502	}
1503	if (set & TIOCM_DTR) {
1504		control |= CONTROL_DTR;
1505		control |= CONTROL_WRITE_DTR;
1506	}
1507	if (clear & TIOCM_RTS) {
1508		control &= ~CONTROL_RTS;
1509		control |= CONTROL_WRITE_RTS;
1510	}
1511	if (clear & TIOCM_DTR) {
1512		control &= ~CONTROL_DTR;
1513		control |= CONTROL_WRITE_DTR;
1514	}
1515
1516	dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
1517
1518	return cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
1519}
1520
1521static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
1522{
1523	if (on)
1524		cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0);
1525	else
1526		cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
1527}
1528
1529static int cp210x_tiocmget(struct tty_struct *tty)
1530{
1531	struct usb_serial_port *port = tty->driver_data;
1532	u8 control;
1533	int result;
1534
1535	result = cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
1536	if (result)
1537		return result;
1538
1539	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
1540		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
1541		|((control & CONTROL_CTS) ? TIOCM_CTS : 0)
1542		|((control & CONTROL_DSR) ? TIOCM_DSR : 0)
1543		|((control & CONTROL_RING)? TIOCM_RI  : 0)
1544		|((control & CONTROL_DCD) ? TIOCM_CD  : 0);
1545
1546	dev_dbg(&port->dev, "%s - control = 0x%.2x\n", __func__, control);
1547
1548	return result;
1549}
1550
1551static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
1552{
1553	struct usb_serial_port *port = tty->driver_data;
1554	u16 state;
1555
1556	if (break_state == 0)
1557		state = BREAK_OFF;
1558	else
1559		state = BREAK_ON;
1560	dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
1561		state == BREAK_OFF ? "off" : "on");
1562	cp210x_write_u16_reg(port, CP210X_SET_BREAK, state);
1563}
1564
1565#ifdef CONFIG_GPIOLIB
1566static int cp210x_gpio_request(struct gpio_chip *gc, unsigned int offset)
1567{
1568	struct usb_serial *serial = gpiochip_get_data(gc);
1569	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1570
1571	if (priv->gpio_altfunc & BIT(offset))
1572		return -ENODEV;
1573
1574	return 0;
1575}
1576
1577static int cp210x_gpio_get(struct gpio_chip *gc, unsigned int gpio)
1578{
1579	struct usb_serial *serial = gpiochip_get_data(gc);
1580	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1581	u8 req_type = REQTYPE_DEVICE_TO_HOST;
1582	int result;
1583	u8 buf;
1584
1585	if (priv->partnum == CP210X_PARTNUM_CP2105)
1586		req_type = REQTYPE_INTERFACE_TO_HOST;
1587
1588	result = usb_autopm_get_interface(serial->interface);
1589	if (result)
1590		return result;
1591
1592	result = cp210x_read_vendor_block(serial, req_type,
1593					  CP210X_READ_LATCH, &buf, sizeof(buf));
1594	usb_autopm_put_interface(serial->interface);
1595	if (result < 0)
1596		return result;
1597
1598	return !!(buf & BIT(gpio));
1599}
1600
1601static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
1602{
1603	struct usb_serial *serial = gpiochip_get_data(gc);
1604	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1605	struct cp210x_gpio_write buf;
1606	int result;
1607
1608	if (value == 1)
1609		buf.state = BIT(gpio);
1610	else
1611		buf.state = 0;
1612
1613	buf.mask = BIT(gpio);
1614
1615	result = usb_autopm_get_interface(serial->interface);
1616	if (result)
1617		goto out;
1618
1619	if (priv->partnum == CP210X_PARTNUM_CP2105) {
1620		result = cp210x_write_vendor_block(serial,
1621						   REQTYPE_HOST_TO_INTERFACE,
1622						   CP210X_WRITE_LATCH, &buf,
1623						   sizeof(buf));
1624	} else {
1625		u16 wIndex = buf.state << 8 | buf.mask;
1626
1627		result = usb_control_msg(serial->dev,
1628					 usb_sndctrlpipe(serial->dev, 0),
1629					 CP210X_VENDOR_SPECIFIC,
1630					 REQTYPE_HOST_TO_DEVICE,
1631					 CP210X_WRITE_LATCH,
1632					 wIndex,
1633					 NULL, 0, USB_CTRL_SET_TIMEOUT);
1634	}
1635
1636	usb_autopm_put_interface(serial->interface);
1637out:
1638	if (result < 0) {
1639		dev_err(&serial->interface->dev, "failed to set GPIO value: %d\n",
1640				result);
1641	}
1642}
1643
1644static int cp210x_gpio_direction_get(struct gpio_chip *gc, unsigned int gpio)
1645{
1646	struct usb_serial *serial = gpiochip_get_data(gc);
1647	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1648
1649	return priv->gpio_input & BIT(gpio);
1650}
1651
1652static int cp210x_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
1653{
1654	struct usb_serial *serial = gpiochip_get_data(gc);
1655	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1656
1657	if (priv->partnum == CP210X_PARTNUM_CP2105) {
1658		/* hardware does not support an input mode */
1659		return -ENOTSUPP;
1660	}
1661
1662	/* push-pull pins cannot be changed to be inputs */
1663	if (priv->gpio_pushpull & BIT(gpio))
1664		return -EINVAL;
1665
1666	/* make sure to release pin if it is being driven low */
1667	cp210x_gpio_set(gc, gpio, 1);
1668
1669	priv->gpio_input |= BIT(gpio);
1670
1671	return 0;
1672}
1673
1674static int cp210x_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio,
1675					int value)
1676{
1677	struct usb_serial *serial = gpiochip_get_data(gc);
1678	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1679
1680	priv->gpio_input &= ~BIT(gpio);
1681	cp210x_gpio_set(gc, gpio, value);
1682
1683	return 0;
1684}
1685
1686static int cp210x_gpio_set_config(struct gpio_chip *gc, unsigned int gpio,
1687				  unsigned long config)
1688{
1689	struct usb_serial *serial = gpiochip_get_data(gc);
1690	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1691	enum pin_config_param param = pinconf_to_config_param(config);
1692
1693	/* Succeed only if in correct mode (this can't be set at runtime) */
1694	if ((param == PIN_CONFIG_DRIVE_PUSH_PULL) &&
1695	    (priv->gpio_pushpull & BIT(gpio)))
1696		return 0;
1697
1698	if ((param == PIN_CONFIG_DRIVE_OPEN_DRAIN) &&
1699	    !(priv->gpio_pushpull & BIT(gpio)))
1700		return 0;
1701
1702	return -ENOTSUPP;
1703}
1704
1705/*
1706 * This function is for configuring GPIO using shared pins, where other signals
1707 * are made unavailable by configuring the use of GPIO. This is believed to be
1708 * only applicable to the cp2105 at this point, the other devices supported by
1709 * this driver that provide GPIO do so in a way that does not impact other
1710 * signals and are thus expected to have very different initialisation.
1711 */
1712static int cp2105_gpioconf_init(struct usb_serial *serial)
1713{
1714	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1715	struct cp210x_pin_mode mode;
1716	struct cp210x_dual_port_config config;
1717	u8 intf_num = cp210x_interface_num(serial);
1718	u8 iface_config;
1719	int result;
1720
1721	result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
1722					  CP210X_GET_DEVICEMODE, &mode,
1723					  sizeof(mode));
1724	if (result < 0)
1725		return result;
1726
1727	result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
1728					  CP210X_GET_PORTCONFIG, &config,
1729					  sizeof(config));
1730	if (result < 0)
1731		return result;
1732
1733	/*  2 banks of GPIO - One for the pins taken from each serial port */
1734	if (intf_num == 0) {
1735		if (mode.eci == CP210X_PIN_MODE_MODEM) {
1736			/* mark all GPIOs of this interface as reserved */
1737			priv->gpio_altfunc = 0xff;
1738			return 0;
1739		}
1740
1741		iface_config = config.eci_cfg;
1742		priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
1743						CP210X_ECI_GPIO_MODE_MASK) >>
1744						CP210X_ECI_GPIO_MODE_OFFSET);
1745		priv->gc.ngpio = 2;
1746	} else if (intf_num == 1) {
1747		if (mode.sci == CP210X_PIN_MODE_MODEM) {
1748			/* mark all GPIOs of this interface as reserved */
1749			priv->gpio_altfunc = 0xff;
1750			return 0;
1751		}
1752
1753		iface_config = config.sci_cfg;
1754		priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
1755						CP210X_SCI_GPIO_MODE_MASK) >>
1756						CP210X_SCI_GPIO_MODE_OFFSET);
1757		priv->gc.ngpio = 3;
1758	} else {
1759		return -ENODEV;
1760	}
1761
1762	/* mark all pins which are not in GPIO mode */
1763	if (iface_config & CP2105_GPIO0_TXLED_MODE)	/* GPIO 0 */
1764		priv->gpio_altfunc |= BIT(0);
1765	if (iface_config & (CP2105_GPIO1_RXLED_MODE |	/* GPIO 1 */
1766			CP2105_GPIO1_RS485_MODE))
1767		priv->gpio_altfunc |= BIT(1);
1768
1769	/* driver implementation for CP2105 only supports outputs */
1770	priv->gpio_input = 0;
1771
1772	return 0;
1773}
1774
1775static int cp2104_gpioconf_init(struct usb_serial *serial)
1776{
1777	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1778	struct cp210x_single_port_config config;
1779	u8 iface_config;
1780	u8 gpio_latch;
1781	int result;
1782	u8 i;
1783
1784	result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
1785					  CP210X_GET_PORTCONFIG, &config,
1786					  sizeof(config));
1787	if (result < 0)
1788		return result;
1789
1790	priv->gc.ngpio = 4;
1791
1792	iface_config = config.device_cfg;
1793	priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
1794					CP210X_GPIO_MODE_MASK) >>
1795					CP210X_GPIO_MODE_OFFSET);
1796	gpio_latch = (u8)((le16_to_cpu(config.reset_state) &
1797					CP210X_GPIO_MODE_MASK) >>
1798					CP210X_GPIO_MODE_OFFSET);
1799
1800	/* mark all pins which are not in GPIO mode */
1801	if (iface_config & CP2104_GPIO0_TXLED_MODE)	/* GPIO 0 */
1802		priv->gpio_altfunc |= BIT(0);
1803	if (iface_config & CP2104_GPIO1_RXLED_MODE)	/* GPIO 1 */
1804		priv->gpio_altfunc |= BIT(1);
1805	if (iface_config & CP2104_GPIO2_RS485_MODE)	/* GPIO 2 */
1806		priv->gpio_altfunc |= BIT(2);
1807
1808	/*
1809	 * Like CP2102N, CP2104 has also no strict input and output pin
1810	 * modes.
1811	 * Do the same input mode emulation as CP2102N.
1812	 */
1813	for (i = 0; i < priv->gc.ngpio; ++i) {
1814		/*
1815		 * Set direction to "input" iff pin is open-drain and reset
1816		 * value is 1.
1817		 */
1818		if (!(priv->gpio_pushpull & BIT(i)) && (gpio_latch & BIT(i)))
1819			priv->gpio_input |= BIT(i);
1820	}
1821
1822	return 0;
1823}
1824
1825static int cp2102n_gpioconf_init(struct usb_serial *serial)
1826{
1827	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1828	const u16 config_size = 0x02a6;
1829	u8 gpio_rst_latch;
1830	u8 config_version;
1831	u8 gpio_pushpull;
1832	u8 *config_buf;
1833	u8 gpio_latch;
1834	u8 gpio_ctrl;
1835	int result;
1836	u8 i;
1837
1838	/*
1839	 * Retrieve device configuration from the device.
1840	 * The array received contains all customization settings done at the
1841	 * factory/manufacturer. Format of the array is documented at the
1842	 * time of writing at:
1843	 * https://www.silabs.com/community/interface/knowledge-base.entry.html/2017/03/31/cp2102n_setconfig-xsfa
1844	 */
1845	config_buf = kmalloc(config_size, GFP_KERNEL);
1846	if (!config_buf)
1847		return -ENOMEM;
1848
1849	result = cp210x_read_vendor_block(serial,
1850					  REQTYPE_DEVICE_TO_HOST,
1851					  CP210X_READ_2NCONFIG,
1852					  config_buf,
1853					  config_size);
1854	if (result < 0) {
1855		kfree(config_buf);
1856		return result;
1857	}
1858
1859	config_version = config_buf[CP210X_2NCONFIG_CONFIG_VERSION_IDX];
1860	gpio_pushpull = config_buf[CP210X_2NCONFIG_GPIO_MODE_IDX];
1861	gpio_ctrl = config_buf[CP210X_2NCONFIG_GPIO_CONTROL_IDX];
1862	gpio_rst_latch = config_buf[CP210X_2NCONFIG_GPIO_RSTLATCH_IDX];
1863
1864	kfree(config_buf);
1865
1866	/* Make sure this is a config format we understand. */
1867	if (config_version != 0x01)
1868		return -ENOTSUPP;
1869
1870	priv->gc.ngpio = 4;
1871
1872	/*
1873	 * Get default pin states after reset. Needed so we can determine
1874	 * the direction of an open-drain pin.
1875	 */
1876	gpio_latch = (gpio_rst_latch >> 3) & 0x0f;
1877
1878	/* 0 indicates open-drain mode, 1 is push-pull */
1879	priv->gpio_pushpull = (gpio_pushpull >> 3) & 0x0f;
1880
1881	/* 0 indicates GPIO mode, 1 is alternate function */
1882	priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
1883
1884	if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) {
1885		/*
1886		 * For the QFN28 package, GPIO4-6 are controlled by
1887		 * the low three bits of the mode/latch fields.
1888		 * Contrary to the document linked above, the bits for
1889		 * the SUSPEND pins are elsewhere.  No alternate
1890		 * function is available for these pins.
1891		 */
1892		priv->gc.ngpio = 7;
1893		gpio_latch |= (gpio_rst_latch & 7) << 4;
1894		priv->gpio_pushpull |= (gpio_pushpull & 7) << 4;
1895	}
1896
1897	/*
1898	 * The CP2102N does not strictly has input and output pin modes,
1899	 * it only knows open-drain and push-pull modes which is set at
1900	 * factory. An open-drain pin can function both as an
1901	 * input or an output. We emulate input mode for open-drain pins
1902	 * by making sure they are not driven low, and we do not allow
1903	 * push-pull pins to be set as an input.
1904	 */
1905	for (i = 0; i < priv->gc.ngpio; ++i) {
1906		/*
1907		 * Set direction to "input" iff pin is open-drain and reset
1908		 * value is 1.
1909		 */
1910		if (!(priv->gpio_pushpull & BIT(i)) && (gpio_latch & BIT(i)))
1911			priv->gpio_input |= BIT(i);
1912	}
1913
1914	return 0;
1915}
1916
1917static int cp210x_gpio_init(struct usb_serial *serial)
1918{
1919	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1920	int result;
1921
1922	switch (priv->partnum) {
1923	case CP210X_PARTNUM_CP2104:
1924		result = cp2104_gpioconf_init(serial);
1925		break;
1926	case CP210X_PARTNUM_CP2105:
1927		result = cp2105_gpioconf_init(serial);
1928		break;
1929	case CP210X_PARTNUM_CP2102N_QFN28:
1930	case CP210X_PARTNUM_CP2102N_QFN24:
1931	case CP210X_PARTNUM_CP2102N_QFN20:
1932		result = cp2102n_gpioconf_init(serial);
1933		break;
1934	default:
1935		return 0;
1936	}
1937
1938	if (result < 0)
1939		return result;
1940
1941	priv->gc.label = "cp210x";
1942	priv->gc.request = cp210x_gpio_request;
1943	priv->gc.get_direction = cp210x_gpio_direction_get;
1944	priv->gc.direction_input = cp210x_gpio_direction_input;
1945	priv->gc.direction_output = cp210x_gpio_direction_output;
1946	priv->gc.get = cp210x_gpio_get;
1947	priv->gc.set = cp210x_gpio_set;
1948	priv->gc.set_config = cp210x_gpio_set_config;
1949	priv->gc.owner = THIS_MODULE;
1950	priv->gc.parent = &serial->interface->dev;
1951	priv->gc.base = -1;
1952	priv->gc.can_sleep = true;
1953
1954	result = gpiochip_add_data(&priv->gc, serial);
1955	if (!result)
1956		priv->gpio_registered = true;
1957
1958	return result;
1959}
1960
1961static void cp210x_gpio_remove(struct usb_serial *serial)
1962{
1963	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1964
1965	if (priv->gpio_registered) {
1966		gpiochip_remove(&priv->gc);
1967		priv->gpio_registered = false;
1968	}
1969}
1970
1971#else
1972
1973static int cp210x_gpio_init(struct usb_serial *serial)
1974{
1975	return 0;
1976}
1977
1978static void cp210x_gpio_remove(struct usb_serial *serial)
1979{
1980	/* Nothing to do */
1981}
1982
1983#endif
1984
1985static int cp210x_port_probe(struct usb_serial_port *port)
1986{
1987	struct usb_serial *serial = port->serial;
1988	struct cp210x_port_private *port_priv;
1989	int ret;
1990
1991	port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
1992	if (!port_priv)
1993		return -ENOMEM;
1994
1995	port_priv->bInterfaceNumber = cp210x_interface_num(serial);
1996
1997	usb_set_serial_port_data(port, port_priv);
1998
1999	ret = cp210x_detect_swapped_line_ctl(port);
2000	if (ret) {
2001		kfree(port_priv);
2002		return ret;
2003	}
2004
2005	return 0;
2006}
2007
2008static int cp210x_port_remove(struct usb_serial_port *port)
2009{
2010	struct cp210x_port_private *port_priv;
2011
2012	port_priv = usb_get_serial_port_data(port);
2013	kfree(port_priv);
2014
2015	return 0;
2016}
2017
2018static void cp210x_init_max_speed(struct usb_serial *serial)
2019{
2020	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
2021	bool use_actual_rate = false;
2022	speed_t min = 300;
2023	speed_t max;
2024
2025	switch (priv->partnum) {
2026	case CP210X_PARTNUM_CP2101:
2027		max = 921600;
2028		break;
2029	case CP210X_PARTNUM_CP2102:
2030	case CP210X_PARTNUM_CP2103:
2031		max = 1000000;
2032		break;
2033	case CP210X_PARTNUM_CP2104:
2034		use_actual_rate = true;
2035		max = 2000000;
2036		break;
2037	case CP210X_PARTNUM_CP2108:
2038		max = 2000000;
2039		break;
2040	case CP210X_PARTNUM_CP2105:
2041		if (cp210x_interface_num(serial) == 0) {
2042			use_actual_rate = true;
2043			max = 2000000;	/* ECI */
2044		} else {
2045			min = 2400;
2046			max = 921600;	/* SCI */
2047		}
2048		break;
2049	case CP210X_PARTNUM_CP2102N_QFN28:
2050	case CP210X_PARTNUM_CP2102N_QFN24:
2051	case CP210X_PARTNUM_CP2102N_QFN20:
2052		use_actual_rate = true;
2053		max = 3000000;
2054		break;
2055	default:
2056		max = 2000000;
2057		break;
2058	}
2059
2060	priv->min_speed = min;
2061	priv->max_speed = max;
2062	priv->use_actual_rate = use_actual_rate;
2063}
2064
2065static int cp210x_attach(struct usb_serial *serial)
2066{
2067	int result;
2068	struct cp210x_serial_private *priv;
2069
2070	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
2071	if (!priv)
2072		return -ENOMEM;
2073
2074	result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
2075					  CP210X_GET_PARTNUM, &priv->partnum,
2076					  sizeof(priv->partnum));
2077	if (result < 0) {
2078		dev_warn(&serial->interface->dev,
2079			 "querying part number failed\n");
2080		priv->partnum = CP210X_PARTNUM_UNKNOWN;
2081	}
2082
2083	usb_set_serial_data(serial, priv);
2084
2085	cp210x_init_max_speed(serial);
2086
2087	result = cp210x_gpio_init(serial);
2088	if (result < 0) {
2089		dev_err(&serial->interface->dev, "GPIO initialisation failed: %d\n",
2090				result);
2091	}
2092
2093	return 0;
2094}
2095
2096static void cp210x_disconnect(struct usb_serial *serial)
2097{
2098	cp210x_gpio_remove(serial);
2099}
2100
2101static void cp210x_release(struct usb_serial *serial)
2102{
2103	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
2104
2105	cp210x_gpio_remove(serial);
2106
2107	kfree(priv);
 
2108}
2109
2110module_usb_serial_driver(serial_drivers, id_table);
2111
2112MODULE_DESCRIPTION(DRIVER_DESC);
2113MODULE_LICENSE("GPL v2");