Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * OF helpers for the MDIO (Ethernet PHY) API
4 *
5 * Copyright (c) 2009 Secret Lab Technologies, Ltd.
6 *
7 * This file provides helper functions for extracting PHY device information
8 * out of the OpenFirmware device tree and using it to populate an mii_bus.
9 */
10
11#include <linux/kernel.h>
12#include <linux/device.h>
13#include <linux/netdevice.h>
14#include <linux/err.h>
15#include <linux/phy.h>
16#include <linux/phy_fixed.h>
17#include <linux/of.h>
18#include <linux/of_irq.h>
19#include <linux/of_mdio.h>
20#include <linux/of_net.h>
21#include <linux/module.h>
22
23#define DEFAULT_GPIO_RESET_DELAY 10 /* in microseconds */
24
25MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
26MODULE_LICENSE("GPL");
27
28/* Extract the clause 22 phy ID from the compatible string of the form
29 * ethernet-phy-idAAAA.BBBB */
30static int of_get_phy_id(struct device_node *device, u32 *phy_id)
31{
32 struct property *prop;
33 const char *cp;
34 unsigned int upper, lower;
35
36 of_property_for_each_string(device, "compatible", prop, cp) {
37 if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) == 2) {
38 *phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF);
39 return 0;
40 }
41 }
42 return -EINVAL;
43}
44
45static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
46{
47 struct of_phandle_args arg;
48 int err;
49
50 err = of_parse_phandle_with_fixed_args(node, "timestamper", 1, 0, &arg);
51
52 if (err == -ENOENT)
53 return NULL;
54 else if (err)
55 return ERR_PTR(err);
56
57 if (arg.args_count != 1)
58 return ERR_PTR(-EINVAL);
59
60 return register_mii_timestamper(arg.np, arg.args[0]);
61}
62
63int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
64 struct device_node *child, u32 addr)
65{
66 int rc;
67
68 rc = of_irq_get(child, 0);
69 if (rc == -EPROBE_DEFER)
70 return rc;
71
72 if (rc > 0) {
73 phy->irq = rc;
74 mdio->irq[addr] = rc;
75 } else {
76 phy->irq = mdio->irq[addr];
77 }
78
79 if (of_property_read_bool(child, "broken-turn-around"))
80 mdio->phy_ignore_ta_mask |= 1 << addr;
81
82 of_property_read_u32(child, "reset-assert-us",
83 &phy->mdio.reset_assert_delay);
84 of_property_read_u32(child, "reset-deassert-us",
85 &phy->mdio.reset_deassert_delay);
86
87 /* Associate the OF node with the device structure so it
88 * can be looked up later */
89 of_node_get(child);
90 phy->mdio.dev.of_node = child;
91 phy->mdio.dev.fwnode = of_fwnode_handle(child);
92
93 /* All data is now stored in the phy struct;
94 * register it */
95 rc = phy_device_register(phy);
96 if (rc) {
97 of_node_put(child);
98 return rc;
99 }
100
101 dev_dbg(&mdio->dev, "registered phy %pOFn at address %i\n",
102 child, addr);
103 return 0;
104}
105EXPORT_SYMBOL(of_mdiobus_phy_device_register);
106
107static int of_mdiobus_register_phy(struct mii_bus *mdio,
108 struct device_node *child, u32 addr)
109{
110 struct mii_timestamper *mii_ts;
111 struct phy_device *phy;
112 bool is_c45;
113 int rc;
114 u32 phy_id;
115
116 mii_ts = of_find_mii_timestamper(child);
117 if (IS_ERR(mii_ts))
118 return PTR_ERR(mii_ts);
119
120 is_c45 = of_device_is_compatible(child,
121 "ethernet-phy-ieee802.3-c45");
122
123 if (!is_c45 && !of_get_phy_id(child, &phy_id))
124 phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
125 else
126 phy = get_phy_device(mdio, addr, is_c45);
127 if (IS_ERR(phy)) {
128 if (mii_ts)
129 unregister_mii_timestamper(mii_ts);
130 return PTR_ERR(phy);
131 }
132
133 rc = of_mdiobus_phy_device_register(mdio, phy, child, addr);
134 if (rc) {
135 if (mii_ts)
136 unregister_mii_timestamper(mii_ts);
137 phy_device_free(phy);
138 return rc;
139 }
140
141 /* phy->mii_ts may already be defined by the PHY driver. A
142 * mii_timestamper probed via the device tree will still have
143 * precedence.
144 */
145 if (mii_ts)
146 phy->mii_ts = mii_ts;
147
148 return 0;
149}
150
151static int of_mdiobus_register_device(struct mii_bus *mdio,
152 struct device_node *child, u32 addr)
153{
154 struct mdio_device *mdiodev;
155 int rc;
156
157 mdiodev = mdio_device_create(mdio, addr);
158 if (IS_ERR(mdiodev))
159 return PTR_ERR(mdiodev);
160
161 /* Associate the OF node with the device structure so it
162 * can be looked up later.
163 */
164 of_node_get(child);
165 mdiodev->dev.of_node = child;
166 mdiodev->dev.fwnode = of_fwnode_handle(child);
167
168 /* All data is now stored in the mdiodev struct; register it. */
169 rc = mdio_device_register(mdiodev);
170 if (rc) {
171 mdio_device_free(mdiodev);
172 of_node_put(child);
173 return rc;
174 }
175
176 dev_dbg(&mdio->dev, "registered mdio device %pOFn at address %i\n",
177 child, addr);
178 return 0;
179}
180
181/* The following is a list of PHY compatible strings which appear in
182 * some DTBs. The compatible string is never matched against a PHY
183 * driver, so is pointless. We only expect devices which are not PHYs
184 * to have a compatible string, so they can be matched to an MDIO
185 * driver. Encourage users to upgrade their DT blobs to remove these.
186 */
187static const struct of_device_id whitelist_phys[] = {
188 { .compatible = "brcm,40nm-ephy" },
189 { .compatible = "broadcom,bcm5241" },
190 { .compatible = "marvell,88E1111", },
191 { .compatible = "marvell,88e1116", },
192 { .compatible = "marvell,88e1118", },
193 { .compatible = "marvell,88e1145", },
194 { .compatible = "marvell,88e1149r", },
195 { .compatible = "marvell,88e1310", },
196 { .compatible = "marvell,88E1510", },
197 { .compatible = "marvell,88E1514", },
198 { .compatible = "moxa,moxart-rtl8201cp", },
199 {}
200};
201
202/*
203 * Return true if the child node is for a phy. It must either:
204 * o Compatible string of "ethernet-phy-idX.X"
205 * o Compatible string of "ethernet-phy-ieee802.3-c45"
206 * o Compatible string of "ethernet-phy-ieee802.3-c22"
207 * o In the white list above (and issue a warning)
208 * o No compatibility string
209 *
210 * A device which is not a phy is expected to have a compatible string
211 * indicating what sort of device it is.
212 */
213bool of_mdiobus_child_is_phy(struct device_node *child)
214{
215 u32 phy_id;
216
217 if (of_get_phy_id(child, &phy_id) != -EINVAL)
218 return true;
219
220 if (of_device_is_compatible(child, "ethernet-phy-ieee802.3-c45"))
221 return true;
222
223 if (of_device_is_compatible(child, "ethernet-phy-ieee802.3-c22"))
224 return true;
225
226 if (of_match_node(whitelist_phys, child)) {
227 pr_warn(FW_WARN
228 "%pOF: Whitelisted compatible string. Please remove\n",
229 child);
230 return true;
231 }
232
233 if (!of_find_property(child, "compatible", NULL))
234 return true;
235
236 return false;
237}
238EXPORT_SYMBOL(of_mdiobus_child_is_phy);
239
240/**
241 * of_mdiobus_register - Register mii_bus and create PHYs from the device tree
242 * @mdio: pointer to mii_bus structure
243 * @np: pointer to device_node of MDIO bus.
244 *
245 * This function registers the mii_bus structure and registers a phy_device
246 * for each child node of @np.
247 */
248int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
249{
250 struct device_node *child;
251 bool scanphys = false;
252 int addr, rc;
253
254 if (!np)
255 return mdiobus_register(mdio);
256
257 /* Do not continue if the node is disabled */
258 if (!of_device_is_available(np))
259 return -ENODEV;
260
261 /* Mask out all PHYs from auto probing. Instead the PHYs listed in
262 * the device tree are populated after the bus has been registered */
263 mdio->phy_mask = ~0;
264
265 mdio->dev.of_node = np;
266 mdio->dev.fwnode = of_fwnode_handle(np);
267
268 /* Get bus level PHY reset GPIO details */
269 mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY;
270 of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us);
271 mdio->reset_post_delay_us = 0;
272 of_property_read_u32(np, "reset-post-delay-us", &mdio->reset_post_delay_us);
273
274 /* Register the MDIO bus */
275 rc = mdiobus_register(mdio);
276 if (rc)
277 return rc;
278
279 /* Loop over the child nodes and register a phy_device for each phy */
280 for_each_available_child_of_node(np, child) {
281 addr = of_mdio_parse_addr(&mdio->dev, child);
282 if (addr < 0) {
283 scanphys = true;
284 continue;
285 }
286
287 if (of_mdiobus_child_is_phy(child))
288 rc = of_mdiobus_register_phy(mdio, child, addr);
289 else
290 rc = of_mdiobus_register_device(mdio, child, addr);
291
292 if (rc == -ENODEV)
293 dev_err(&mdio->dev,
294 "MDIO device at address %d is missing.\n",
295 addr);
296 else if (rc)
297 goto unregister;
298 }
299
300 if (!scanphys)
301 return 0;
302
303 /* auto scan for PHYs with empty reg property */
304 for_each_available_child_of_node(np, child) {
305 /* Skip PHYs with reg property set */
306 if (of_find_property(child, "reg", NULL))
307 continue;
308
309 for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
310 /* skip already registered PHYs */
311 if (mdiobus_is_registered_device(mdio, addr))
312 continue;
313
314 /* be noisy to encourage people to set reg property */
315 dev_info(&mdio->dev, "scan phy %pOFn at address %i\n",
316 child, addr);
317
318 if (of_mdiobus_child_is_phy(child)) {
319 /* -ENODEV is the return code that PHYLIB has
320 * standardized on to indicate that bus
321 * scanning should continue.
322 */
323 rc = of_mdiobus_register_phy(mdio, child, addr);
324 if (!rc)
325 break;
326 if (rc != -ENODEV)
327 goto unregister;
328 }
329 }
330 }
331
332 return 0;
333
334unregister:
335 mdiobus_unregister(mdio);
336 return rc;
337}
338EXPORT_SYMBOL(of_mdiobus_register);
339
340/**
341 * of_phy_find_device - Give a PHY node, find the phy_device
342 * @phy_np: Pointer to the phy's device tree node
343 *
344 * If successful, returns a pointer to the phy_device with the embedded
345 * struct device refcount incremented by one, or NULL on failure.
346 */
347struct phy_device *of_phy_find_device(struct device_node *phy_np)
348{
349 struct device *d;
350 struct mdio_device *mdiodev;
351
352 if (!phy_np)
353 return NULL;
354
355 d = bus_find_device_by_of_node(&mdio_bus_type, phy_np);
356 if (d) {
357 mdiodev = to_mdio_device(d);
358 if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
359 return to_phy_device(d);
360 put_device(d);
361 }
362
363 return NULL;
364}
365EXPORT_SYMBOL(of_phy_find_device);
366
367/**
368 * of_phy_connect - Connect to the phy described in the device tree
369 * @dev: pointer to net_device claiming the phy
370 * @phy_np: Pointer to device tree node for the PHY
371 * @hndlr: Link state callback for the network device
372 * @flags: flags to pass to the PHY
373 * @iface: PHY data interface type
374 *
375 * If successful, returns a pointer to the phy_device with the embedded
376 * struct device refcount incremented by one, or NULL on failure. The
377 * refcount must be dropped by calling phy_disconnect() or phy_detach().
378 */
379struct phy_device *of_phy_connect(struct net_device *dev,
380 struct device_node *phy_np,
381 void (*hndlr)(struct net_device *), u32 flags,
382 phy_interface_t iface)
383{
384 struct phy_device *phy = of_phy_find_device(phy_np);
385 int ret;
386
387 if (!phy)
388 return NULL;
389
390 phy->dev_flags |= flags;
391
392 ret = phy_connect_direct(dev, phy, hndlr, iface);
393
394 /* refcount is held by phy_connect_direct() on success */
395 put_device(&phy->mdio.dev);
396
397 return ret ? NULL : phy;
398}
399EXPORT_SYMBOL(of_phy_connect);
400
401/**
402 * of_phy_get_and_connect
403 * - Get phy node and connect to the phy described in the device tree
404 * @dev: pointer to net_device claiming the phy
405 * @np: Pointer to device tree node for the net_device claiming the phy
406 * @hndlr: Link state callback for the network device
407 *
408 * If successful, returns a pointer to the phy_device with the embedded
409 * struct device refcount incremented by one, or NULL on failure. The
410 * refcount must be dropped by calling phy_disconnect() or phy_detach().
411 */
412struct phy_device *of_phy_get_and_connect(struct net_device *dev,
413 struct device_node *np,
414 void (*hndlr)(struct net_device *))
415{
416 phy_interface_t iface;
417 struct device_node *phy_np;
418 struct phy_device *phy;
419 int ret;
420
421 ret = of_get_phy_mode(np, &iface);
422 if (ret)
423 return NULL;
424 if (of_phy_is_fixed_link(np)) {
425 ret = of_phy_register_fixed_link(np);
426 if (ret < 0) {
427 netdev_err(dev, "broken fixed-link specification\n");
428 return NULL;
429 }
430 phy_np = of_node_get(np);
431 } else {
432 phy_np = of_parse_phandle(np, "phy-handle", 0);
433 if (!phy_np)
434 return NULL;
435 }
436
437 phy = of_phy_connect(dev, phy_np, hndlr, 0, iface);
438
439 of_node_put(phy_np);
440
441 return phy;
442}
443EXPORT_SYMBOL(of_phy_get_and_connect);
444
445/**
446 * of_phy_attach - Attach to a PHY without starting the state machine
447 * @dev: pointer to net_device claiming the phy
448 * @phy_np: Node pointer for the PHY
449 * @flags: flags to pass to the PHY
450 * @iface: PHY data interface type
451 *
452 * If successful, returns a pointer to the phy_device with the embedded
453 * struct device refcount incremented by one, or NULL on failure. The
454 * refcount must be dropped by calling phy_disconnect() or phy_detach().
455 */
456struct phy_device *of_phy_attach(struct net_device *dev,
457 struct device_node *phy_np, u32 flags,
458 phy_interface_t iface)
459{
460 struct phy_device *phy = of_phy_find_device(phy_np);
461 int ret;
462
463 if (!phy)
464 return NULL;
465
466 ret = phy_attach_direct(dev, phy, flags, iface);
467
468 /* refcount is held by phy_attach_direct() on success */
469 put_device(&phy->mdio.dev);
470
471 return ret ? NULL : phy;
472}
473EXPORT_SYMBOL(of_phy_attach);
474
475/*
476 * of_phy_is_fixed_link() and of_phy_register_fixed_link() must
477 * support two DT bindings:
478 * - the old DT binding, where 'fixed-link' was a property with 5
479 * cells encoding various informations about the fixed PHY
480 * - the new DT binding, where 'fixed-link' is a sub-node of the
481 * Ethernet device.
482 */
483bool of_phy_is_fixed_link(struct device_node *np)
484{
485 struct device_node *dn;
486 int len, err;
487 const char *managed;
488
489 /* New binding */
490 dn = of_get_child_by_name(np, "fixed-link");
491 if (dn) {
492 of_node_put(dn);
493 return true;
494 }
495
496 err = of_property_read_string(np, "managed", &managed);
497 if (err == 0 && strcmp(managed, "auto") != 0)
498 return true;
499
500 /* Old binding */
501 if (of_get_property(np, "fixed-link", &len) &&
502 len == (5 * sizeof(__be32)))
503 return true;
504
505 return false;
506}
507EXPORT_SYMBOL(of_phy_is_fixed_link);
508
509int of_phy_register_fixed_link(struct device_node *np)
510{
511 struct fixed_phy_status status = {};
512 struct device_node *fixed_link_node;
513 u32 fixed_link_prop[5];
514 const char *managed;
515
516 if (of_property_read_string(np, "managed", &managed) == 0 &&
517 strcmp(managed, "in-band-status") == 0) {
518 /* status is zeroed, namely its .link member */
519 goto register_phy;
520 }
521
522 /* New binding */
523 fixed_link_node = of_get_child_by_name(np, "fixed-link");
524 if (fixed_link_node) {
525 status.link = 1;
526 status.duplex = of_property_read_bool(fixed_link_node,
527 "full-duplex");
528 if (of_property_read_u32(fixed_link_node, "speed",
529 &status.speed)) {
530 of_node_put(fixed_link_node);
531 return -EINVAL;
532 }
533 status.pause = of_property_read_bool(fixed_link_node, "pause");
534 status.asym_pause = of_property_read_bool(fixed_link_node,
535 "asym-pause");
536 of_node_put(fixed_link_node);
537
538 goto register_phy;
539 }
540
541 /* Old binding */
542 if (of_property_read_u32_array(np, "fixed-link", fixed_link_prop,
543 ARRAY_SIZE(fixed_link_prop)) == 0) {
544 status.link = 1;
545 status.duplex = fixed_link_prop[1];
546 status.speed = fixed_link_prop[2];
547 status.pause = fixed_link_prop[3];
548 status.asym_pause = fixed_link_prop[4];
549 goto register_phy;
550 }
551
552 return -ENODEV;
553
554register_phy:
555 return PTR_ERR_OR_ZERO(fixed_phy_register(PHY_POLL, &status, np));
556}
557EXPORT_SYMBOL(of_phy_register_fixed_link);
558
559void of_phy_deregister_fixed_link(struct device_node *np)
560{
561 struct phy_device *phydev;
562
563 phydev = of_phy_find_device(np);
564 if (!phydev)
565 return;
566
567 fixed_phy_unregister(phydev);
568
569 put_device(&phydev->mdio.dev); /* of_phy_find_device() */
570 phy_device_free(phydev); /* fixed_phy_register() */
571}
572EXPORT_SYMBOL(of_phy_deregister_fixed_link);
1/*
2 * OF helpers for the MDIO (Ethernet PHY) API
3 *
4 * Copyright (c) 2009 Secret Lab Technologies, Ltd.
5 *
6 * This file is released under the GPLv2
7 *
8 * This file provides helper functions for extracting PHY device information
9 * out of the OpenFirmware device tree and using it to populate an mii_bus.
10 */
11
12#include <linux/kernel.h>
13#include <linux/device.h>
14#include <linux/netdevice.h>
15#include <linux/err.h>
16#include <linux/phy.h>
17#include <linux/of.h>
18#include <linux/of_irq.h>
19#include <linux/of_mdio.h>
20#include <linux/module.h>
21
22MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
23MODULE_LICENSE("GPL");
24
25static void of_set_phy_supported(struct phy_device *phydev, u32 max_speed)
26{
27 /* The default values for phydev->supported are provided by the PHY
28 * driver "features" member, we want to reset to sane defaults fist
29 * before supporting higher speeds.
30 */
31 phydev->supported &= PHY_DEFAULT_FEATURES;
32
33 switch (max_speed) {
34 default:
35 return;
36
37 case SPEED_1000:
38 phydev->supported |= PHY_1000BT_FEATURES;
39 case SPEED_100:
40 phydev->supported |= PHY_100BT_FEATURES;
41 case SPEED_10:
42 phydev->supported |= PHY_10BT_FEATURES;
43 }
44}
45
46/* Extract the clause 22 phy ID from the compatible string of the form
47 * ethernet-phy-idAAAA.BBBB */
48static int of_get_phy_id(struct device_node *device, u32 *phy_id)
49{
50 struct property *prop;
51 const char *cp;
52 unsigned int upper, lower;
53
54 of_property_for_each_string(device, "compatible", prop, cp) {
55 if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) == 2) {
56 *phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF);
57 return 0;
58 }
59 }
60 return -EINVAL;
61}
62
63static int of_mdiobus_register_phy(struct mii_bus *mdio, struct device_node *child,
64 u32 addr)
65{
66 struct phy_device *phy;
67 bool is_c45;
68 int rc;
69 u32 max_speed = 0;
70 u32 phy_id;
71
72 is_c45 = of_device_is_compatible(child,
73 "ethernet-phy-ieee802.3-c45");
74
75 if (!is_c45 && !of_get_phy_id(child, &phy_id))
76 phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
77 else
78 phy = get_phy_device(mdio, addr, is_c45);
79 if (!phy || IS_ERR(phy))
80 return 1;
81
82 rc = irq_of_parse_and_map(child, 0);
83 if (rc > 0) {
84 phy->irq = rc;
85 if (mdio->irq)
86 mdio->irq[addr] = rc;
87 } else {
88 if (mdio->irq)
89 phy->irq = mdio->irq[addr];
90 }
91
92 /* Associate the OF node with the device structure so it
93 * can be looked up later */
94 of_node_get(child);
95 phy->dev.of_node = child;
96
97 /* All data is now stored in the phy struct;
98 * register it */
99 rc = phy_device_register(phy);
100 if (rc) {
101 phy_device_free(phy);
102 of_node_put(child);
103 return 1;
104 }
105
106 /* Set phydev->supported based on the "max-speed" property
107 * if present */
108 if (!of_property_read_u32(child, "max-speed", &max_speed))
109 of_set_phy_supported(phy, max_speed);
110
111 dev_dbg(&mdio->dev, "registered phy %s at address %i\n",
112 child->name, addr);
113
114 return 0;
115}
116
117/**
118 * of_mdiobus_register - Register mii_bus and create PHYs from the device tree
119 * @mdio: pointer to mii_bus structure
120 * @np: pointer to device_node of MDIO bus.
121 *
122 * This function registers the mii_bus structure and registers a phy_device
123 * for each child node of @np.
124 */
125int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
126{
127 struct device_node *child;
128 const __be32 *paddr;
129 u32 addr;
130 bool scanphys = false;
131 int rc, i, len;
132
133 /* Mask out all PHYs from auto probing. Instead the PHYs listed in
134 * the device tree are populated after the bus has been registered */
135 mdio->phy_mask = ~0;
136
137 /* Clear all the IRQ properties */
138 if (mdio->irq)
139 for (i=0; i<PHY_MAX_ADDR; i++)
140 mdio->irq[i] = PHY_POLL;
141
142 mdio->dev.of_node = np;
143
144 /* Register the MDIO bus */
145 rc = mdiobus_register(mdio);
146 if (rc)
147 return rc;
148
149 /* Loop over the child nodes and register a phy_device for each one */
150 for_each_available_child_of_node(np, child) {
151 /* A PHY must have a reg property in the range [0-31] */
152 paddr = of_get_property(child, "reg", &len);
153 if (!paddr || len < sizeof(*paddr)) {
154 scanphys = true;
155 dev_err(&mdio->dev, "%s has invalid PHY address\n",
156 child->full_name);
157 continue;
158 }
159
160 addr = be32_to_cpup(paddr);
161 if (addr >= PHY_MAX_ADDR) {
162 dev_err(&mdio->dev, "%s PHY address %i is too large\n",
163 child->full_name, addr);
164 continue;
165 }
166
167 rc = of_mdiobus_register_phy(mdio, child, addr);
168 if (rc)
169 continue;
170 }
171
172 if (!scanphys)
173 return 0;
174
175 /* auto scan for PHYs with empty reg property */
176 for_each_available_child_of_node(np, child) {
177 /* Skip PHYs with reg property set */
178 paddr = of_get_property(child, "reg", &len);
179 if (paddr)
180 continue;
181
182 for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
183 /* skip already registered PHYs */
184 if (mdio->phy_map[addr])
185 continue;
186
187 /* be noisy to encourage people to set reg property */
188 dev_info(&mdio->dev, "scan phy %s at address %i\n",
189 child->name, addr);
190
191 rc = of_mdiobus_register_phy(mdio, child, addr);
192 if (rc)
193 continue;
194 }
195 }
196
197 return 0;
198}
199EXPORT_SYMBOL(of_mdiobus_register);
200
201/* Helper function for of_phy_find_device */
202static int of_phy_match(struct device *dev, void *phy_np)
203{
204 return dev->of_node == phy_np;
205}
206
207/**
208 * of_phy_find_device - Give a PHY node, find the phy_device
209 * @phy_np: Pointer to the phy's device tree node
210 *
211 * Returns a pointer to the phy_device.
212 */
213struct phy_device *of_phy_find_device(struct device_node *phy_np)
214{
215 struct device *d;
216 if (!phy_np)
217 return NULL;
218
219 d = bus_find_device(&mdio_bus_type, NULL, phy_np, of_phy_match);
220 return d ? to_phy_device(d) : NULL;
221}
222EXPORT_SYMBOL(of_phy_find_device);
223
224/**
225 * of_phy_connect - Connect to the phy described in the device tree
226 * @dev: pointer to net_device claiming the phy
227 * @phy_np: Pointer to device tree node for the PHY
228 * @hndlr: Link state callback for the network device
229 * @iface: PHY data interface type
230 *
231 * Returns a pointer to the phy_device if successful. NULL otherwise
232 */
233struct phy_device *of_phy_connect(struct net_device *dev,
234 struct device_node *phy_np,
235 void (*hndlr)(struct net_device *), u32 flags,
236 phy_interface_t iface)
237{
238 struct phy_device *phy = of_phy_find_device(phy_np);
239
240 if (!phy)
241 return NULL;
242
243 return phy_connect_direct(dev, phy, hndlr, iface) ? NULL : phy;
244}
245EXPORT_SYMBOL(of_phy_connect);
246
247/**
248 * of_phy_connect_fixed_link - Parse fixed-link property and return a dummy phy
249 * @dev: pointer to net_device claiming the phy
250 * @hndlr: Link state callback for the network device
251 * @iface: PHY data interface type
252 *
253 * This function is a temporary stop-gap and will be removed soon. It is
254 * only to support the fs_enet, ucc_geth and gianfar Ethernet drivers. Do
255 * not call this function from new drivers.
256 */
257struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
258 void (*hndlr)(struct net_device *),
259 phy_interface_t iface)
260{
261 struct device_node *net_np;
262 char bus_id[MII_BUS_ID_SIZE + 3];
263 struct phy_device *phy;
264 const __be32 *phy_id;
265 int sz;
266
267 if (!dev->dev.parent)
268 return NULL;
269
270 net_np = dev->dev.parent->of_node;
271 if (!net_np)
272 return NULL;
273
274 phy_id = of_get_property(net_np, "fixed-link", &sz);
275 if (!phy_id || sz < sizeof(*phy_id))
276 return NULL;
277
278 sprintf(bus_id, PHY_ID_FMT, "fixed-0", be32_to_cpu(phy_id[0]));
279
280 phy = phy_connect(dev, bus_id, hndlr, iface);
281 return IS_ERR(phy) ? NULL : phy;
282}
283EXPORT_SYMBOL(of_phy_connect_fixed_link);
284
285/**
286 * of_phy_attach - Attach to a PHY without starting the state machine
287 * @dev: pointer to net_device claiming the phy
288 * @phy_np: Node pointer for the PHY
289 * @flags: flags to pass to the PHY
290 * @iface: PHY data interface type
291 */
292struct phy_device *of_phy_attach(struct net_device *dev,
293 struct device_node *phy_np, u32 flags,
294 phy_interface_t iface)
295{
296 struct phy_device *phy = of_phy_find_device(phy_np);
297
298 if (!phy)
299 return NULL;
300
301 return phy_attach_direct(dev, phy, flags, iface) ? NULL : phy;
302}
303EXPORT_SYMBOL(of_phy_attach);